aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* Linux 3.8.13HEADv3.8.13masterGreg Kroah-Hartman2013-05-111-1/+1
|
* x86/mm: account for PGDIR_SIZE alignmentJerry Hoemann2013-05-111-0/+5
| | | | | | | | | | | | | | | | | | | | | | Patch for -stable. Function find_early_table_space removed upstream. Fixes panic in alloc_low_page due to pgt_buf overflow during init_memory_mapping. find_early_table_space sizes pgt_buf based upon the size of the memory being mapped, but it does not take into account the alignment of the memory. When the region being mapped spans a 512GB (PGDIR_SIZE) alignment, a panic from alloc_low_pages occurs. kernel_physical_mapping_init takes into account PGDIR_SIZE alignment. This causes an extra call to alloc_low_page to be made. This extra call isn't accounted for by find_early_table_space and causes a kernel panic. Change is to take into account PGDIR_SIZE alignment in find_early_table_space. Signed-off-by: Jerry Hoemann <jerry.hoemann@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* kernel/audit_tree.c: tree will leak memory when failure occurs in ↵Chen Gang2013-05-111-1/+1
| | | | | | | | | | | | | | | | | | | audit_trim_trees() commit 12b2f117f3bf738c1a00a6f64393f1953a740bd4 upstream. audit_trim_trees() calls get_tree(). If a failure occurs we must call put_tree(). [akpm@linux-foundation.org: run put_tree() before mutex_lock() for small scalability improvement] Signed-off-by: Chen Gang <gang.chen@asianux.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric Paris <eparis@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* NFSv4.x: Fix handling of partially delegated locksTrond Myklebust2013-05-111-2/+2
| | | | | | | | | | | | | | | | | | commit c5a2a15f8146fdfe45078df7873a6dc1006b3869 upstream. If a NFS client receives a delegation for a file after it has taken a lock on that file, we can currently end up in a situation where we mistakenly skip unlocking that file. The following patch swaps an erroneous check in nfs4_proc_unlck for whether or not the file has a delegation to one which checks whether or not we hold a lock stateid for that file. Reported-by: Chuck Lever <Chuck.Lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Tested-by: Chuck Lever <Chuck.Lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* EDAC: Don't give write permission to read-only filesSrivatsa S. Bhat2013-05-111-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | commit c8c64d165ccfd2274058ac84e0c680f9b48c4ec1 upstream. I get the following warning on boot: ------------[ cut here ]------------ WARNING: at drivers/base/core.c:575 device_create_file+0x9a/0xa0() Hardware name: -[8737R2A]- Write permission without 'store' ... </snip> Drilling down, this is related to dynamic channel ce_count attribute files sporting a S_IWUSR mode without a ->store() function. Looking around, it appears that they aren't supposed to have a ->store() function. So remove the bogus write permission to get rid of the warning. Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> [ shorten commit message ] Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Btrfs: fix extent logging with O_DIRECT into preallocJosef Bacik2013-05-111-8/+13
| | | | | | | | | | | | | | | | | | commit eb384b55ae9c2055ea00c5cc87971e182d47aefa upstream. This is the same as the fix from commit Btrfs: fix bad extent logging but for O_DIRECT. I missed this when I fixed the problem originally, we were still using the em for the orig_start and orig_block_len, which would be the merged extent. We need to use the actual extent from the on disk file extent item, which we have to lookup to make sure it's ok to nocow anyway so just pass in some pointers to hold this info. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Btrfs: compare relevant parts of delayed tree refsJosef Bacik2013-05-111-10/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 41b0fc42800569f63e029549b75c4c9cb63f2dfd upstream. A user reported a panic while running a balance. What was happening was he was relocating a block, which added the reference to the relocation tree. Then relocation would walk through the relocation tree and drop that reference and free that block, and then it would walk down a snapshot which referenced the same block and add another ref to the block. The problem is this was all happening in the same transaction, so the parent block was free'ed up when we drop our reference which was immediately available for allocation, and then it was used _again_ to add a reference for the same block from a different snapshot. This resulted in something like this in the delayed ref tree add ref to 90234880, parent=2067398656, ref_root 1766, level 1 del ref to 90234880, parent=2067398656, ref_root 18446744073709551608, level 1 add ref to 90234880, parent=2067398656, ref_root 1767, level 1 as you can see the ref_root's don't match, because when we inc the ref we use the header owner, which is the original tree the block belonged to, instead of the data reloc tree. Then when we remove the extent we use the reloc tree objectid. But none of this matters, since it is a shared reference which means only the parent matters. When the delayed ref stuff runs it adds all the increments first, and then does all the drops, to make sure that we don't delete the ref if we net a positive ref count. But tree blocks aren't allowed to have multiple refs from the same block, so this panics when it tries to add the second ref. We need the add and the drop to cancel each other out in memory so we only do the final add. So to fix this we need to adjust how the delayed refs are added to the tree. Only the ref_root matters when it is a normal backref, and only the parent matters when it is a shared backref. So make our decision based on what ref type we have. This allows us to keep the ref_root in memory in case anybody wants to use it for something else, and it allows the delayed refs to be merged properly so we don't end up with this panic. With this patch the users image no longer panics on mount, and it has a clean fsck after a normal mount/umount cycle. Thanks, Reported-by: Roman Mamedov <rm@romanrm.ru> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tracing: Fix ftrace_dump()Steven Rostedt (Red Hat)2013-05-112-40/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 7fe70b579c9e3daba71635e31b6189394e7b79d3 upstream. ftrace_dump() had a lot of issues. What ftrace_dump() does, is when ftrace_dump_on_oops is set (via a kernel parameter or sysctl), it will dump out the ftrace buffers to the console when either a oops, panic, or a sysrq-z occurs. This was written a long time ago when ftrace was fragile to recursion. But it wasn't written well even for that. There's a possible deadlock that can occur if a ftrace_dump() is happening and an NMI triggers another dump. This is because it grabs a lock before checking if the dump ran. It also totally disables ftrace, and tracing for no good reasons. As the ring_buffer now checks if it is read via a oops or NMI, where there's a chance that the buffer gets corrupted, it will disable itself. No need to have ftrace_dump() do the same. ftrace_dump() is now cleaned up where it uses an atomic counter to make sure only one dump happens at a time. A simple atomic_inc_return() is enough that is needed for both other CPUs and NMIs. No need for a spinlock, as if one CPU is running the dump, no other CPU needs to do it too. The tracing_on variable is turned off and not turned on. The original code did this, but it wasn't pretty. By just disabling this variable we get the result of not seeing traces that happen between crashes. For sysrq-z, it doesn't get turned on, but the user can always write a '1' to the tracing_on file. If they are using sysrq-z, then they should know about tracing_on. The new code is much easier to read and less error prone. No more deadlock possibility when an NMI triggers here. Reported-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/radeon: fix handling of v6 power tablesAlex Deucher2013-05-111-6/+5
| | | | | | | | | | | commit 441e76ca83ac604eaf0f046def96d8e3a27eea28 upstream. The code was mis-handling variable sized arrays. Reported-by: Sylvain BERTRAND <sylware@legeek.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/radeon: add new richland pci idsAlex Deucher2013-05-112-2/+6
| | | | | | | | commit 62d1f92e06aef9665d71ca7e986b3047ecf0b3c7 upstream. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/radeon: fix possible segfault when parsing pm tablesAlex Deucher2013-05-111-1/+9
| | | | | | | | | | | | | | commit f8e6bfc2ce162855fa4f9822a45659f4b542c960 upstream. If we have a empty power table, bail early and allocate the default power state. Should fix: https://bugs.freedesktop.org/show_bug.cgi?id=63865 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/radeon: fix endian bugs in atom_allocate_fb_scratch()Alex Deucher2013-05-111-3/+3
| | | | | | | | | commit beb71fc61c2cad64e347f164991b8ef476529e64 upstream. Reviwed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/radeon: disable the crtcs in mc_stop (r5xx-r7xx) (v2)Alex Deucher2013-05-112-0/+12
| | | | | | | | | | | | | commit e884fc640ccbdb6f94b9bdb57cfb8464b6688f4c upstream. Just disabling the mem requests should be enough, but that doesn't seem to work correctly on efi systems. v2: blank displays first, then disable. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/radeon: Always flush the VMJerome Glisse2013-05-111-1/+2
| | | | | | | | | | | | | | | | | | | commit 466476dfdcafbb4286ffa232a3a792731b9dc852 upstream. This is slightly cleaned up version of Jerome's patch. There seems to be an issue tracking the last flush of the VM which results in hangs in certain cases when VM is used. For now just flush the VM for every IB. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=62959 https://bugs.freedesktop.org/show_bug.cgi?id=62997 Signed-off-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/radeon: fix typo in si_select_se_sh()Alex Deucher2013-05-111-1/+1
| | | | | | | | commit 79b52d6a7085a3e430c6de450a5847fdbe04159b upstream. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/radeon: fix hdmi mode enable on RS600/RS690/RS740Alex Deucher2013-05-111-2/+2
| | | | | | | | | | | commit dcb852905772416e322536ced5cb3c796d176af5 upstream. These chips were previously skipped since they are pre-R600. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/radeon: cleanup properly if mmio mapping failsAlex Deucher2013-05-111-0/+4
| | | | | | | | | | | | | | commit 0cd9cb76ae26a19df21abc6f94f5fff141e689c7 upstream. If we fail to map the mmio BAR, skip driver tear down that requires mmio. Should fix: https://bugzilla.kernel.org/show_bug.cgi?id=56541 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/radeon/evergreen+: don't enable HPD interrupts on eDP/LVDSAlex Deucher2013-05-111-0/+10
| | | | | | | | | | | | | commit 2e97be73e5f74a317232740ae82eb8f95326a660 upstream. Avoids potential interrupt storms when the display is disabled. May fix: https://bugzilla.kernel.org/show_bug.cgi?id=56041 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/radeon: add some new SI PCI idsAlex Deucher2013-05-111-0/+3
| | | | | | | | commit 18932a28419596bc9403770f5d8a108c5433fe59 upstream. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/radeon: disable the crtcs in mc_stop (evergreen+) (v2)Alex Deucher2013-05-111-0/+12
| | | | | | | | | | | | | | | | | | commit abf1457bbbe4c62066bd03c6d31837dea28644dc upstream. Just disabling the mem requests should be enough, but that doesn't seem to work correctly on efi systems. May fix: https://bugs.freedesktop.org/show_bug.cgi?id=57567 https://bugs.freedesktop.org/show_bug.cgi?id=43655 https://bugzilla.kernel.org/show_bug.cgi?id=56441 v2: blank displays first, then disable. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/radeon: update wait_for_vblank for r1xx-r4xxAlex Deucher2013-05-111-24/+53
| | | | | | | | | | | commit 2b48b968c0d00aa5ab520b65a15a4f374cda7dda upstream. Properly wait for the next vblank region. The previous code didn't always wait long enough depending on the timing. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/radeon: properly lock disp in mc_stop/resume for r5xx-r7xxAlex Deucher2013-05-112-0/+44
| | | | | | | | | | | commit 2f86e2ede39a98650c2d465857405ef1c51372b1 upstream. Need to wait for the new addresses to take affect before re-enabling the MC. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/radeon: properly lock disp in mc_stop/resume for evergreen+Alex Deucher2013-05-112-4/+45
| | | | | | | | | | | commit 968c01664ccbe0e46c19a1af662c4c266a904203 upstream. Need to wait for the new addresses to take affect before re-enabling the MC. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/radeon: update wait_for_vblank for evergreen+Alex Deucher2013-05-111-8/+36
| | | | | | | | | | | commit 10257a6d8359c41407eb26b7ad7bf710a7e00155 upstream. Properly wait for the next vblank region. The previous code didn't always wait long enough depending on the timing. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/radeon: update wait_for_vblank for r5xx-r7xxAlex Deucher2013-05-111-8/+44
| | | | | | | | | | | commit bea5497bfc1067620c8c8e9d37a42e0bb6d7d7fa upstream. Properly wait for the next vblank region. The previous code didn't always wait long enough depending on the timing. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/radeon/dce6: add missing display reg for tiling setupAlex Deucher2013-05-114-0/+9
| | | | | | | | | | | | | | | commit 7c1c7c18fc752b2a1d07597286467ef186312463 upstream. A new tiling config register for the display blocks was added on DCE6. May fix: https://bugs.freedesktop.org/show_bug.cgi?id=62889 https://bugs.freedesktop.org/show_bug.cgi?id=57919 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/radeon: fix typo in rv515_mc_resume()Alex Deucher2013-05-111-1/+1
| | | | | | | | | | | commit 367cbe2fec9b57b72605e2ac4cfd4f2fa823a256 upstream. Doesn't affect anything as the same address gets written in both cases. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/radeon: use frac fb div on RS780/RS880Alex Deucher2013-05-111-0/+3
| | | | | | | | | | | commit 411678288d61ba17afe1f8afed92200be6bbc65d upstream. Monitors seem to prefer it. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=37696 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/radeon: don't use get_engine_clock() on APUsAlex Deucher2013-05-111-1/+5
| | | | | | | | | | | | | | commit bf05d9985111f85ed6922c134567b96eb789283b upstream. It doesn't work reliably. Just report back the currently selected engine clock. Partially fixes: https://bugs.freedesktop.org/show_bug.cgi?id=62493 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/i915: Fall back to bit banging mode for DVO transmitter detectionDavid Müller2013-05-111-1/+12
| | | | | | | | | | | | | | | | | | commit e4bfff54ed3f5de88f5358504c78c2cb037813aa upstream. As discussed in this thread http://lists.freedesktop.org/archives/dri-devel/2013-April/037411.html GMBUS based DVO transmitter detection seems to be unreliable which could result in an unusable DVO port. The attached patch fixes this by falling back to bit banging mode for the time DVO transmitter detection is in progress. Signed-off-by: David Müller <d.mueller@elsoft.ch> Tested-by: David Müller <d.mueller@elsoft.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/i915: Fixup Oops in the pipe config computationDaniel Vetter2013-05-111-10/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit b6c5164d7bf624f3e1b750787ddb983150c5117c upstream. Yet again our current confusion between doing the modeset globally, but only having the new parameters for one crtc at a time. So that intel_set_mode essentially already does a global modeset: intel_modeset_affected_pipes compares the current state with where we want to go to (which is carefully set up by intel_crtc_set_config) and then goes through the modeset sequence for any crtc which needs updating. Now the issue is that the actual interface with the remaining code still only works on one crtc, and so we only pass in one fb and one mode. In intel_set_mode we also only compute one intel_crtc_config (which should be the one for the crtc we're doing a modeset on). The reason for that mismatch is twofold: - We want to eventually do all modeset as global state changes, so it's just infrastructure prep. - But even the old semantics can change more than one crtc when you e.g. move a connector from crtc A to crtc B, then both crtc A and B need to be updated. Usually that means one pipe is disabled and the other enabled. This is also the reason why the hack doesn't touch the disable_pipes mask. Now hilarity ensued in our kms config restore paths when we actually try to do a modeset on all crtcs: If the first crtc should be off and the second should be on, then the call on the first crtc will notice that the 2nd one should be switched on and so tries to compute the pipe_config. But due to a lack of passed-in fb (crtc 1 should be off after all) it only results in tears. This case is ridiculously easy to hit on gen2/3 where the lvds output is restricted to pipe B. Note that before the pipe_config bpp rework gen2/3 didn't care really about the fb->depth, so this is a regression brought to light with commit 4e53c2e010e531b4a014692199e978482d471c7e Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed Mar 27 00:44:58 2013 +0100 drm/i915: precompute pipe bpp before touching the hw But apparently Ajax also managed to blow up pch platforms, probably with some randomized configs, and pch platforms trip up over the lack of an fb even in the old code. So this actually goes back to the first introduction of the new modeset restore code in commit 45e2b5f640b3766da3eda48f6c35f088155c06f3 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Nov 23 18:16:34 2012 +0100 drm/i915: force restore on lid open Fix this mess by now by justing shunting all the cool new global modeset logic in intel_modeset_affected_pipes. v2: Improve commit message and clean up all the comments in intel_modeset_affected_pipes - since the introduction of the modeset restore code they've been a bit outdated. Bugzill: https://bugzilla.redhat.com/show_bug.cgi?id=917725 References: http://www.mail-archive.com/stable@vger.kernel.org/msg38084.html Tested-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/i915: ensure single initialization and cleanup of backlight deviceJani Nikula2013-05-114-6/+10
| | | | | | | | | | | | | | | | | | | | | commit dc652f90e088798bfa31f496ba994ddadd5d5680 upstream. Backlight cleanup in the eDP connector destroy callback caused the backlight device to be removed on some systems that first initialized LVDS and then attempted to initialize eDP. Prevent multiple backlight initializations, and ensure backlight cleanup is only done once by moving it to modeset cleanup. A small wrinkle is the introduced asymmetry in backlight setup/cleanup. This could be solved by adding refcounting, but it seems overkill considering that there should only ever be one backlight device. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=55701 Signed-off-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Peter Verthez <peter.verthez@skynet.be> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/i915: set CPT FDI RX polarity bits based on VBTPaulo Zanoni2013-05-115-6/+16
| | | | | | | | | | | | | | | | | | commit 3f704fa2778d3fe45e6529825a5c7a8bcbc686f4 upstream. Check the VBT to see if the machine has inverted FDI RX polarity on CPT. Based on this bit, set the appropriate bit on the TRANS_CHICKEN2 registers. This should fix some machines that were showing black screens on all outputs. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=60029 Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/i915: Use MLC (l3$) for context objectsChris Wilson2013-05-111-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | commit 4615d4c9e27eda42c3e965f208a4b4065841498c upstream. Enabling context support increases SwapBuffers latency by about 20% (measured on an i7-3720qm). We can offset that loss slightly by enabling faster caching for the contexts. As they are not backed by any particular cache (such as the sampler or render caches) our only option is to select the generic mid-level cache. This reduces the latency of the swap by about 5%. Oddly this effect can be observed running smokin-guns on IVB at 1280x1024: Using BLT copies for swaps: 151.67 fps Using Render copies for swaps (unpatched): 141.70 fps With contexts disabled: 150.23 fps With contexts in L3$: 150.77 fps Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Kenneth Graunke <kenneth@whitecape.org> Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/i915: Workaround incoherence between fences and LLC across multiple CPUsChris Wilson2013-05-111-5/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | commit 25ff1195f8a0b3724541ae7bbe331b4296de9c06 upstream. In order to fully serialize access to the fenced region and the update to the fence register we need to take extreme measures on SNB+, and manually flush writes to memory prior to writing the fence register in conjunction with the memory barriers placed around the register write. Fixes i-g-t/gem_fence_thrash v2: Bring a bigger gun v3: Switch the bigger gun for heavier bullets (Arjan van de Ven) v4: Remove changes for working generations. v5: Reduce to a per-cpu wbinvd() call prior to updating the fences. v6: Rewrite comments to ellide forgotten history. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=62191 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jon Bloomfield <jon.bloomfield@intel.com> Tested-by: Jon Bloomfield <jon.bloomfield@intel.com> (v2) Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/i915: Fix SDVO connector and encoder get_hw_state functionsEgbert Eich2013-05-111-6/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 7a7d1fb79fb581553f4830498045de774a9659f8 upstream. The connector associated with the encoder is considered active when the output associtated with this connector is active on the encoder. The encoder itself is considered active when either there is an active output on it or the respective SDVO channel is active. Having active outputs when the SDVO channel is inactive seems to be inconsistent: such states can be found when intel_modeset_setup_hw_state() collects the hardware state set by the BIOS. This inconsistency will be fixed in intel_sanitize_crtc() (when intel_crtc_update_dpms() is called), this however only happens when the encoder is associated with a crtc. This patch also reverts: commit bd6946e87a98fea11907b2a47368e13044458a35 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Apr 2 21:30:34 2013 +0200 drm/i915: Fix sdvo connector get_hw_state function Signed-off-by: Egbert Eich <eich@suse.de> Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=63031 Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/i915: Add no-lvds quirk for Fujitsu Esprimo Q900Christian Lamparter2013-05-111-0/+8
| | | | | | | | | | | | | | commit 9e9dd0e889c76c786e8f2e164c825c3c06dea30c upstream. The "Mobile Sandy Bridge CPUs" in the Fujitsu Esprimo Q900 mini desktop PCs are probably misleading the LVDS detection code in intel_lvds_supported. Nothing is connected to the LVDS ports in these systems. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/i915: Fix sdvo connector get_hw_state functionDaniel Vetter2013-05-111-0/+4
| | | | | | | | | | | | | | | | | | | | | | commit bd6946e87a98fea11907b2a47368e13044458a35 upstream. The active output is only the currently selected one, which does not imply that it's actually enabled. Since we don't use the sdvo encoder side dpms support, we need to check whether the chip-side sdvo port is enabled instead. v2: Fix up Bugzilla links. v3: Simplify logic a bit (Chris). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=60138 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=63031 Cc: Egbert Eich <eich@pdx.freedesktop.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Egbert Eich <eich@pdx.freedesktop.org> (v2) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/i915: Fix detection of base of stolen memoryChris Wilson2013-05-112-40/+42
| | | | | | | | | | | | | | | | | | | | | | | | | commit e12a2d53ae45a69aea499b64f75e7222cca0f12f upstream. The routine to query the base of stolen memory was using the wrong registers and the wrong encodings on virtually every platform. It was not until the G33 refresh, that a PCI config register was introduced that explicitly said where the stolen memory was. Prior to 865G there was not even a register that said where the end of usable low memory was and where the stolen memory began (or ended depending upon chipset). Before then, one has to look at the BIOS memory maps to find the Top of Memory. Alas that is not exported by arch/x86 and so we have to resort to disabling stolen memory on gen2 for the time being. Then SandyBridge enlarged the PCI register to a full 32-bits and change the encoding of the address, so even though we happened to be querying the right register, we read the wrong bits and ended up using address 0 for our stolen data, i.e. notably FBC. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/ast: deal with bo reserve fail in dirty update pathDave Airlie2013-05-113-4/+43
| | | | | | | | | | | | | | | | | | | | commit 306373b645d80625335b8e684fa09b14ba460cec upstream. Port over the mgag200 fix to ast as it suffers the same issue. On F19 testing, it was noticed we get a lot of errors in dmesg about being unable to reserve the buffer when plymouth starts, this is due to the buffer being in the process of migrating, so it makes sense we can't reserve it. In order to deal with it, this adds delayed updates for the dirty updates, when the bo is unreservable, in the normal console case this shouldn't ever happen, its just when plymouth or X is pushing the console bo to system memory. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/prime: keep a reference from the handle to exported dma-buf (v6)Dave Airlie2013-05-113-41/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 219b47339ced80ca580bb6ce7d1636166984afa7 upstream. Currently we have a problem with this: 1. i915: create gem object 2. i915: export gem object to prime 3. radeon: import gem object 4. close prime fd 5. radeon: unref object 6. i915: unref object i915 has an imported object reference in its file priv, that isn't cleaned up properly until fd close. The reference gets added at step 2, but at step 6 we don't have enough info to clean it up. The solution is to take a reference on the dma-buf when we export it, and drop the reference when the gem handle goes away. So when we export a dma_buf from a gem object, we keep track of it with the handle, we take a reference to the dma_buf. When we close the handle (i.e. userspace is finished with the buffer), we drop the reference to the dma_buf, and it gets collected. This patch isn't meant to fix any other problem or bikesheds, and it doesn't fix any races with other scenarios. v1.1: move export symbol line back up. v2: okay I had to do a bit more, as the first patch showed a leak on one of my tests, that I found using the dma-buf debugfs support, the problem case is exporting a buffer twice with the same handle, we'd add another export handle for it unnecessarily, however we now fail if we try to export the same object with a different gem handle, however I'm not sure if that is a case I want to support, and I've gotten the code to WARN_ON if we hit something like that. v2.1: rebase this patch, write better commit msg. v3: cleanup error handling, track import vs export in linked list, these two patches were separate previously, but seem to work better like this. v4: danvet is correct, this code is no longer useful, since the buffer better exist, so remove it. v5: always take a reference to the dma buf object, import or export. (Imre Deak contributed this originally) v6: square the circle, remove import vs export tracking now that there is no difference Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/gma500: fix backlight hotkeys behaviour on netbooksAnisse Astier2013-05-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | commit e127dc28cc3057575da0216cde85687153ca180f upstream. Backlight hotkeys weren't working before on certain cedartrail laptops. The source of this problem is that the hotkeys' ASLE opregion interrupts were simply ignored. Driver seemed to expect the interrupt to be associated with a pipe, but it wasn't. Accepting the ASLE interrupt without an associated pipe event flag fixes the issue, the backlight code is called when needed, making the brightness keys work properly. [patrik: This patch affects irq handling on any netbook with opregion support] Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=833597 Reference: http://lists.freedesktop.org/archives/dri-devel/2012-July/025279.html Signed-off-by: Anisse Astier <anisse@astier.eu> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/mgag200: deal with bo reserve fail in dirty update pathDave Airlie2013-05-113-5/+44
| | | | | | | | | | | | | | | | | | commit 641719599528d806e00de8ae8c8453361266a312 upstream. On F19 testing, it was noticed we get a lot of errors in dmesg about being unable to reserve the buffer when plymouth starts, this is due to the buffer being in the process of migrating, so it makes sense we can't reserve it. In order to deal with it, this adds delayed updates for the dirty updates, when the bo is unreservable, in the normal console case this shouldn't ever happen, its just when plymouth or X is pushing the console bo to system memory. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/cirrus: deal with bo reserve fail in dirty update pathDave Airlie2013-05-113-2/+40
| | | | | | | | | | | | | | | | | | | | commit f3b2bbdc8a87a080ccd23d27fca4b87d61340dd4 upstream. Port over the mgag200 fix to cirrus as it suffers the same issue. On F19 testing, it was noticed we get a lot of errors in dmesg about being unable to reserve the buffer when plymouth starts, this is due to the buffer being in the process of migrating, so it makes sense we can't reserve it. In order to deal with it, this adds delayed updates for the dirty updates, when the bo is unreservable, in the normal console case this shouldn't ever happen, its just when plymouth or X is pushing the console bo to system memory. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* block: fix max discard sectors limitJames Bottomley2013-05-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 871dd9286e25330c8a581e5dacfa8b1dfe1dd641 upstream. linux-v3.8-rc1 and later support for plug for blkdev_issue_discard with commit 0cfbcafcae8b7364b5fa96c2b26ccde7a3a296a9 (block: add plug for blkdev_issue_discard ) For example, 1) DISCARD rq-1 with size size 4GB 2) DISCARD rq-2 with size size 1GB If these 2 discard requests get merged, final request size will be 5GB. In this case, request's __data_len field may overflow as it can store max 4GB(unsigned int). This issue was observed while doing mkfs.f2fs on 5GB SD card: https://lkml.org/lkml/2013/4/1/292 Info: sector size = 512 Info: total sectors = 11370496 (in 512bytes) Info: zone aligned segment0 blkaddr: 512 [ 257.789764] blk_update_request: bio idx 0 >= vcnt 0 mkfs process gets stuck in D state and I see the following in the dmesg: [ 257.789733] __end_that: dev mmcblk0: type=1, flags=122c8081 [ 257.789764] sector 4194304, nr/cnr 2981888/4294959104 [ 257.789764] bio df3840c0, biotail df3848c0, buffer (null), len 1526726656 [ 257.789764] blk_update_request: bio idx 0 >= vcnt 0 [ 257.794921] request botched: dev mmcblk0: type=1, flags=122c8081 [ 257.794921] sector 4194304, nr/cnr 2981888/4294959104 [ 257.794921] bio df3840c0, biotail df3848c0, buffer (null), len 1526726656 This patch fixes this issue. Reported-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Tested-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* arm64: Ignore the 'write' ESR flag on cache maintenance faultsCatalin Marinas2013-05-111-1/+2
| | | | | | | | | | | | | | | | commit 0e7f7bcc3fc87489cda5aa6aff8ce40eed912279 upstream. ESR.WnR bit is always set on data cache maintenance faults even though the page is not required to have write permission. If a translation fault (page not yet mapped) happens for read-only user address range, Linux incorrectly assumes a permission fault. This patch adds the check of the ESR.CM bit during the page fault handling to ignore the 'write' flag. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Tim Northover <Tim.Northover@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* RDMA/cxgb4: Fix SQ allocation when on-chip SQ is disabledThadeu Lima de Souza Cascardo2013-05-111-12/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 5b0c275926b8149c555da874bb4ec258ea3292aa upstream. Commit c079c28714e4 ("RDMA/cxgb4: Fix error handling in create_qp()") broke SQ allocation. Instead of falling back to host allocation when on-chip allocation fails, it tries to allocate both. And when it does, and we try to free the address from the genpool using the host address, we hit a BUG and the system crashes as below. We create a new function that has the previous behavior and properly propagate the error, as intended. kernel BUG at /usr/src/packages/BUILD/kernel-ppc64-3.0.68/linux-3.0/lib/genalloc.c:340! Oops: Exception in kernel mode, sig: 5 [#1] SMP NR_CPUS=1024 NUMA pSeries Modules linked in: rdma_ucm rdma_cm ib_addr ib_cm iw_cm ib_sa ib_mad ib_uverbs iw_cxgb4 ib_core ip6t_LOG xt_tcpudp xt_pkttype ipt_LOG xt_limit ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_raw xt_NOTRACK ipt_REJECT xt_state iptable_raw iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_broadcast nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 ip_tables ip6table_filter ip6_tables x_tables fuse loop dm_mod ipv6 ipv6_lib sr_mod cdrom ibmveth(X) cxgb4 sg ext3 jbd mbcache sd_mod crc_t10dif scsi_dh_emc scsi_dh_hp_sw scsi_dh_alua scsi_dh_rdac scsi_dh ibmvscsic(X) scsi_transport_srp scsi_tgt scsi_mod Supported: Yes NIP: c00000000037d41c LR: d000000003913824 CTR: c00000000037d3b0 REGS: c0000001f350ae50 TRAP: 0700 Tainted: G X (3.0.68-0.9-ppc64) MSR: 8000000000029032 <EE,ME,CE,IR,DR> CR: 24042482 XER: 00000001 TASK = c0000001f6f2a840[3616] 'rping' THREAD: c0000001f3508000 CPU: 0 GPR00: c0000001f6e875c8 c0000001f350b0d0 c000000000fc9690 c0000001f6e875c0 GPR04: 00000000000c0000 0000000000010000 0000000000000000 c0000000009d482a GPR08: 000000006a170000 0000000000100000 c0000001f350b140 c0000001f6e875c8 GPR12: d000000003915dd0 c000000003f40000 000000003e3ecfa8 c0000001f350bea0 GPR16: c0000001f350bcd0 00000000003c0000 0000000000040100 c0000001f6e74a80 GPR20: d00000000399a898 c0000001f6e74ac8 c0000001fad91600 c0000001f6e74ab0 GPR24: c0000001f7d23f80 0000000000000000 0000000000000002 000000006a170000 GPR28: 000000000000000c c0000001f584c8d0 d000000003925180 c0000001f6e875c8 NIP [c00000000037d41c] .gen_pool_free+0x6c/0xf8 LR [d000000003913824] .c4iw_ocqp_pool_free+0x8c/0xd8 [iw_cxgb4] Call Trace: [c0000001f350b0d0] [c0000001f350b180] 0xc0000001f350b180 (unreliable) [c0000001f350b170] [d000000003913824] .c4iw_ocqp_pool_free+0x8c/0xd8 [iw_cxgb4] [c0000001f350b210] [d00000000390fd70] .dealloc_sq+0x90/0xb0 [iw_cxgb4] [c0000001f350b280] [d00000000390fe08] .destroy_qp+0x78/0xf8 [iw_cxgb4] [c0000001f350b310] [d000000003912738] .c4iw_destroy_qp+0x208/0x2d0 [iw_cxgb4] [c0000001f350b460] [d000000003861874] .ib_destroy_qp+0x5c/0x130 [ib_core] [c0000001f350b510] [d0000000039911bc] .ib_uverbs_cleanup_ucontext+0x174/0x4f8 [ib_uverbs] [c0000001f350b5f0] [d000000003991568] .ib_uverbs_close+0x28/0x70 [ib_uverbs] [c0000001f350b670] [c0000000001e7b2c] .__fput+0xdc/0x278 [c0000001f350b720] [c0000000001a9590] .remove_vma+0x68/0xd8 [c0000001f350b7b0] [c0000000001a9720] .exit_mmap+0x120/0x160 [c0000001f350b8d0] [c0000000000af330] .mmput+0x80/0x160 [c0000001f350b960] [c0000000000b5d0c] .exit_mm+0x1ac/0x1e8 [c0000001f350ba10] [c0000000000b8154] .do_exit+0x1b4/0x4b8 [c0000001f350bad0] [c0000000000b84b0] .do_group_exit+0x58/0xf8 [c0000001f350bb60] [c0000000000ce9f4] .get_signal_to_deliver+0x2f4/0x5d0 [c0000001f350bc60] [c000000000017ee4] .do_signal_pending+0x6c/0x3e0 [c0000001f350bdb0] [c0000000000182cc] .do_signal+0x74/0x78 [c0000001f350be30] [c000000000009e74] do_work+0x24/0x28 Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Cc: Emil Goode <emilgoode@gmail.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* r8169: fix 8168evl frame padding.Stefan Bader2013-05-111-0/+9
| | | | | | | | | | | commit e5195c1f31f399289347e043d6abf3ffa80f0005 upstream. Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Cc: hayeswang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ext4: add check for inodes_count overflow in new resize ioctlTheodore Ts'o2013-05-111-0/+4
| | | | | | | | | | | | | commit 3f8a6411fbada1fa482276591e037f3b1adcf55b upstream. Addresses-Red-Hat-Bugzilla: #913245 Reported-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by: Lingzhu Xiang <lxiang@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* netfilter: ip6t_NPT: Fix translation for non-multiple of 32 prefix lengthsMatthias Schiffer2013-05-111-1/+1
| | | | | | | | | | | | | commit 906b1c394d0906a154fbdc904ca506bceb515756 upstream. The bitmask used for the prefix mangling was being calculated incorrectly, leading to the wrong part of the address being replaced when the prefix length wasn't a multiple of 32. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.2)