9 years agoMerge jb-release into d-jb-release
Keith Deacon [Thu, 20 Sep 2012 19:09:40 +0000 (14:09 -0500)]
Merge jb-release into d-jb-release

9 years agowlan: Upgrading firmware to R5.SP3.01
Panduranga Mallireddy [Wed, 19 Sep 2012 22:15:31 +0000 (17:15 -0500)]
wlan: Upgrading firmware to R5.SP3.01

Firmware for WL128X:
wl128x-fw-4-sr.bin  Rev
wl128x-fw-4-mr.bin  Rev
wl128x-fw-4-plt.bin PLT

Firmware for WL127X:
wl127x-fw-4-sr.bin  Rev
wl127x-fw-4-mr.bin  Rev
wl127x-fw-4-plt.bin PLT

Change-Id: I1d9f2ec6bfe2f4da71002f6d2f494393a98ac826
Signed-off-by: Panduranga Mallireddy <>
9 years agoMerge "wlan: wl18xx: update firmware file for r8.a4.02 release" into d-jb-release
Vishal Mahaveer [Tue, 18 Sep 2012 20:36:35 +0000 (20:36 +0000)]
Merge "wlan: wl18xx: update firmware file for r8.a4.02 release" into d-jb-release

9 years agowlan: wl18xx: update firmware file for r8.a4.02 release
Vishal Mahaveer [Tue, 18 Sep 2012 15:39:07 +0000 (10:39 -0500)]
wlan: wl18xx: update firmware file for r8.a4.02 release

Upgrade wl18xx firmware file for r8.a4.02.

wl18xx-fw.bin file is replaced by wl18xx-fw-mc.bin file
wl18xx-fw-mc.bin  -  FRev

Change-Id: I83c4fe28fa5b737c1540744ea1d187d40ee46718
Signed-off-by: Vishal Mahaveer <>
9 years agowpan: add wilink8 (wl1857) firmware file
Oleg Matcovschi [Mon, 17 Sep 2012 22:01:43 +0000 (15:01 -0700)]
wpan: add wilink8 (wl1857) firmware file

Add wl1857 bluetooth firmware file.

Signed-off-by: Oleg Matcovschi <>
9 years agoMerge "Updated Ducati binary for Blaze" into jb-release
James W. Mills [Mon, 17 Sep 2012 15:29:20 +0000 (15:29 +0000)]
Merge "Updated Ducati binary for Blaze" into jb-release

9 years agoUpdated Ducati binary for Blaze
James W. Mills [Mon, 17 Sep 2012 14:24:20 +0000 (09:24 -0500)]
Updated Ducati binary for Blaze

Updated Ducati binary to DUCATIMM-2.1.15

Change-Id: Ieba81a21f4a0c502ae9614653401bd7df2bb9fab
Signed-off-by: James W. Mills <>
9 years agoSGX-BIN: DDK binaries for OMAP5
Rodrigo Obregon [Wed, 12 Sep 2012 22:01:10 +0000 (17:01 -0500)]
SGX-BIN: DDK binaries for OMAP5

Binaries based on release 1.9.RC2IMG2139099_TI.0001

Change-Id: I9cca2b882e3f700fc4e0b65db76648beea53d10f
Signed-off-by: Rodrigo Obregon <>
9 years agoMerge jb-release into d-jb-release
Keith Deacon [Tue, 11 Sep 2012 03:49:35 +0000 (22:49 -0500)]
Merge jb-release into d-jb-release

9 years agoproprietary-open: Add proper FM firmware scripts for COM8 PG2.0
Manjunatha Halli [Fri, 7 Sep 2012 21:21:05 +0000 (16:21 -0500)]
proprietary-open: Add proper FM firmware scripts for COM8 PG2.0

Change-Id: Ie6ee99f435e1ca5dc730e702276e993276cb8f89
Signed-off-by: Manjunatha Halli <>
9 years agoIMG DDK 1.9.RC2@2139099 for Android
Eric Luong [Wed, 5 Sep 2012 19:35:24 +0000 (14:35 -0500)]
IMG DDK 1.9.RC2@2139099 for Android

IMG DDK Release 1.9.RC2@2139099 for Android.

Included in this release:
- User space and Kernel module binaries
- Kernel module source code

TI patches:
14f82bb SGX KM: ShrinkPagePool statistics changed to PVR_DBG_MESSAGE
0a641d3 SGX KM: Fix num_handle calculation for ion handles
dbc5412 SGX-UM: Fix YV12 plane offset calculation
3f30c44 SGX UM: HACK: add extra read in SGXInitialise Script 1
95e5e61 SGX-UM: OGLES2: Twiddled NPOT rounding
4fabc62 BUILD: fix usage and help
f24e4ee BUILD: Add install option "adb"
48917ad pvr-km: gc: Add page offset for ion allocated buffers
770c613 pvr-km: gc: Improve gc map/unmap logging
18ebcde gralloc: Map NV12 buffers with the GC MMU
ec5dbf8 SGX-KM: Enable APM for OMAP5
7cca393 SGX-UM: Enable APM for OMAP5
0a6cc20 SGX-UM: Don't load omaplfb module when in-kernel driver is present
9b19be2 SGX-KM: Support in-kernel omaplfb
83797fd SGXKM: Multi-plane support for  deviceclass i-face
12c0152 build: remove omaplfb from install step
a3b7939 pvr-um: use arm-linux-androideabi- and fix JB debug build
3b8d413 PVR-UM: Make pvrsrvinit wrapper compatible with Jellybean
9a51dc6 Revert "SGXUM: Implements Gralloc late CPU mapping"
26fde09 SGX-UM: build - Remove target platform based configuration
d8fe8bc OMAP5: BUILD: Remove unused variable
a4bcb35 readme: Correct DDK version
15e3e57 SGX-UM: Add support for hardware specific powervr.ini files
d94bbab PVR-UM: Add support to DDK for powervr.ini files
43f0767 SGX-UM: Added 16 bit depth EGL configs
2358502 SGX UM: Srvinit block until services ready
427b204 SGX UM: HAL block OpenPVRServices until services initialized
c484977 SGX UM: Fix calculation of chroma plane in blit_internal
c2f5df8 SGX KM: Dump dsscomp info during HW recovery
19a42d2 SGXKM: Adds support for 1D buffer allocation
168ce6b SGXKM: Do not perform explicit invalidate on mmap
51a40ae SGXUM: Implements Gralloc late CPU mapping
f408e0e SGXUM: Gralloc allow for late or no GPU mapping
962d1bd SGXUM: Add allocation of images from system heap
ca11707 SGXUM: Adds A8/U8/Y8 color format to WSEGL
bb932d7 SGXKM: Increase XPROC_WORKAROUND to 500
9c9ee48 SGXKM: Fix file permissions
b5257f6 SGXKM: Make the DMM offset optional
77bae8e gralloc: add support for GRALLOC_USAGE_EXCLUSIVE_DISP
5d6ffd4 gralloc: publicly define omap specific usage flags
9005320 SGX-KM: Block DPLL cascading when SGX clock is enabled
4dc9a7f SGX-KM: Hold wake lock during hardware recovery
21427b9 SGX-KM: Add logging of thermal events
64c66f7 SGX-KM: Add cooling device interface
a796f63 SGX-KM: Add asynchronous frequency limiting to DVFS
2f9849c SGX-KM: Add DVFS active modes
d461646 SGX-UM: Add DVFS idle modes
205baff SGX-KM: Add DVFS idle modes
92d816c SGX-KM: Make APM configurable by module parameter
d09e4ca SGX-KM: Adapt to device_scale interface change in K3.4
0522b99 SGXKM: Fix NULL handle warning when blitting GC320
ef6bc2e SGXKM: Allow for late or no GPU mapping
402c29a SGXKM: Allow for SW access to a tiler buffer
a92966c SGXUM: Adds YUV plane offsets for MM
e2d3b88 SGXKM: SGX Tiler non-page-aligned support
8629462 SGXUM: Implements GPU Common Buffer Interface
f1cb649 SGXUM: Multi-buffer manage bridge
9c740b1 SGXKM: Multi-buffer manage bridge
f8ad906 SGXKM: Implements Heap Alloc Failure Report
16ca311 SGXUM: Add support for GPU unmap/remap
24d416c SGXKM: Add support for GPU unmap/remap
8db3ad5 SGX-KM: Use CONFIG_DRM_OMAP_DMM_TILER for kernel 3.4
67fac8b SGX-KM: Use pud_offset to get pmd_offset
7f22d73 PVR-KM: Prevent compilation of dc_omapfb3_linux
8ef6a11 SGX-KM: Remove hardcoding of values in egl.cfg
83404ff pvr-km: kfree phys info at unmap instead of map
cf6a131 pvr-km: add a struct size to the physical descriptor
2796bcb gralloc: Set flag to enable GC MMU mapping in PVR services
b423150 PVR-KM: Add function to obtain BV descriptor through 3PDC interface
618943a PVR-KM: Map buffers to GC core MMU on allocation time with Bltsville
ae027ad SGXKM: Prevent mapping of export with zero ref
83a3751 OMAP4-SGX-UM: Allow for tiler buffer SW access
bdd37c1 OMAP4-SGX-UM: Gralloc SW access and caching flags
fc2b814 OMAP4-SGX-UM: Gralloc HAL_PIXEL_FORMAT_NV12 format
81d1397 SGX-KM: Make PVRSRVExportFDToIONHandles generic and register it with ion
f9323d2 PVR-KM: OMAP5: Use shared device for Tiler 2D Mappings
23a0b0b PVR-KM: OMAP5: Hardcode core version value
6716f54 SGX-KM: OMAP5: HACK: Set the size of the SGX registers
a5e6ced SGX-UM: add detection of OMAP5432 in pvrsrvinit
05ed03e SGX-UM: build: Add panda5 and omap5sevm to product list
9468360 SGX-KM: BUILD: Add OMAP5 support
35f7f51 SGX-UM: BUILD: Consolidate build into a single Makefile
5274190 SGX-KM: (build) Remove Android product and version dependency
1793900 Build: Don't install egl.cfg anymore
2f97d09 SGX-KM: egl.cfg sysfs entry
30a34b3 SGX-KM: Enable DPF, TRACE and ASSERT
debc1e6 build-km: Enable blaze and blaze_tablet for ICS environment
cadad99 build: Enable blaze and blaze_tablet for ICS environment
c01ac9b SGX-KM: Add ability to build multiple sets of GFX kernel modules
7bab5dd build: Set correct load directory for kernel modules.
40133cb KM: add support for sgx544sc
8f93a09 SGX-UM: Add ability to build multiple sets of GFX binaries
d0081b4 SGX-KM: Use platform data for OPP symbols.
c7ae6ea SGX-UM: Enable building binaries for specific SGX
cdeeccb readme: Add README
42bfb66 build: Add
5bc6953 Create gitignore file
de46d4e IMG DDK 1.9RC2@2139099 for Android

Change-Id: Idf232c3d08e9d022fa721f25276dccae93a7a0dd
Signed-off-by: Eric Luong <x0119002@ti.c>
9 years agoproprietary-open: remove ti-wpan-fw installation
Pavan Savoy [Thu, 30 Aug 2012 19:55:59 +0000 (14:55 -0500)]
proprietary-open: remove ti-wpan-fw installation

Since the device/ti/proprietary-open wpan.tgz firmware contains firmware for
connectivity chipsets on all omap4/omap5 based boards. The rule shall be moved
to a more generic hardware/ti/wpan/

Change-Id: Ibb94ffb0e7fa29058b76069c4566ec17359c6005
Signed-off-by: Pavan Savoy <>
9 years agowpan: add wilink8 (wl18xx) firmware files
Pavan Savoy [Mon, 27 Aug 2012 23:07:27 +0000 (18:07 -0500)]
wpan: add wilink8 (wl18xx) firmware files

wl18xx firmware files were removed due to licensing restrictions.
Now the licenses are approved, so placing them back.

Change-Id: Ib74710daa9703e0eb422e20e5c9b27dfad78d2ec
Signed-off-by: Pavan Savoy <>
9 years agoMerge jb-release into d-jb-release
Keith Deacon [Mon, 27 Aug 2012 21:41:36 +0000 (16:41 -0500)]
Merge jb-release into d-jb-release

9 years agowlan: add wilink8 (wl18xx) firmware files
Vishal Mahaveer [Mon, 27 Aug 2012 18:46:15 +0000 (13:46 -0500)]
wlan: add wilink8 (wl18xx) firmware files

wl18xx firmware files were removed due to licensing restrictions.
Now the licenses are approved, so placing them back.

Change-Id: I03195e1e7d88b11da2e3263156da9929a938af6a
Signed-off-by: Vishal Mahaveer <>
9 years agoSGX BIN: 1.9@2130229 CPCAM fix and new BV headers
Eric Luong [Fri, 24 Aug 2012 19:04:37 +0000 (14:04 -0500)]
SGX BIN: 1.9@2130229 CPCAM fix and new BV headers

-SGX KM: Fix num_handle calculation for ion handles

Build using the following patch in kernel
BV: Update headers to 2.2
Add bvbltparams.src2auxdstrect,
Add BVAT_reserved2 bvauxtype;

Change-Id: I3cf6b8923eb55ac6c9fe4b1356b0436b7ea9601e
Signed-off-by: Eric Luong <x0119002@ti.c>
9 years agoMerge "IMG DDK Release 1.9@2130229 for Android." into jb-release
Hemant Hariyani [Wed, 22 Aug 2012 16:03:27 +0000 (11:03 -0500)]
Merge "IMG DDK Release 1.9@2130229 for Android." into jb-release

9 years agoAdded wpan fw to all devices that source ti-vendor-omap4
James Mills [Wed, 22 Aug 2012 14:46:48 +0000 (09:46 -0500)]
Added wpan fw to all devices that source ti-vendor-omap4

Currently, that includes blaze, blaze_tablet, omap5sevm, panda, and

Change-Id: If2a938eda04bd1dbb068674dc009439477a12296
Signed-off-by: James Mills <>
9 years agoMerge "proprietary-open: rule to install wpan fw" into jb-release
James W. Mills [Fri, 17 Aug 2012 16:55:35 +0000 (11:55 -0500)]
Merge "proprietary-open: rule to install wpan fw" into jb-release

9 years agoIMG DDK Release 1.9@2130229 for Android.
Eric Luong [Fri, 17 Aug 2012 15:28:54 +0000 (10:28 -0500)]
IMG DDK Release 1.9@2130229 for Android.

Included in this release:
- User space and kernel module binaries
- Kernel modules source code

IMG changes in this release:
- Compiler: Fixed offline compilation of vertex shaders
- Services/microkernel: Fixed BRN36513 workaround for single core SGX XT systems
- Compiler: Fixed UFOP_MOVCBIT comparison
- Microkernel: Improved FindTA checks for multiple-memory context systems

TI pathes:
63cc56e SGX-UM: Fix YV12 plane offset calculation
526e71b SGX UM: HACK: add extra read in SGXInitialise Script 1
a1ef458 SGX-UM: OGLES2: Twiddled NPOT rounding
b51d801 BUILD: fix usage and help
969f228 BUILD: Add install option "adb"
acd9a23 pvr-km: gc: Add page offset for ion allocated buffers
37e14ae pvr-km: gc: Improve gc map/unmap logging
2a8ee79 gralloc: Map NV12 buffers with the GC MMU
03d02e4 SGX-KM: Enable APM for OMAP5
940cfee SGX-UM: Enable APM for OMAP5
eef46d1 SGX-UM: Don't load omaplfb module when in-kernel driver is present
d86fc7c SGX-KM: Support in-kernel omaplfb
f14fa74 SGXKM: Multi-plane support for  deviceclass i-face
1bbab6f build: remove omaplfb from install step
56b4ba3 pvr-um: use arm-linux-androideabi- and fix JB debug build
be8e43c PVR-UM: Make pvrsrvinit wrapper compatible with Jellybean
2564afc Revert "SGXUM: Implements Gralloc late CPU mapping"
328e505 SGX-UM: build - Remove target platform based configuration
6fa8bf9 OMAP5: BUILD: Remove unused variable
774712f readme: Correct DDK version
d9f62b6 SGX-UM: Add support for hardware specific powervr.ini files
542b265 PVR-UM: Add support to DDK for powervr.ini files
e388e17 SGX-UM: Added 16 bit depth EGL configs
b4eb77d SGX UM: Srvinit block until services ready
b0ea039 SGX UM: HAL block OpenPVRServices until services initialized
6b914de SGX UM: Fix calculation of chroma plane in blit_internal
a8a3f50 SGX KM: Dump dsscomp info during HW recovery
00aac37 SGXKM: Adds support for 1D buffer allocation
2c27f8e SGXKM: Do not perform explicit invalidate on mmap
2c3428f SGXUM: Implements Gralloc late CPU mapping
a94e84a SGXUM: Gralloc allow for late or no GPU mapping
a994ca8 SGXUM: Add allocation of images from system heap
6059267 SGXUM: Adds A8/U8/Y8 color format to WSEGL
5d3a379 SGXKM: Increase XPROC_WORKAROUND to 500
5087be0 SGXKM: Fix file permissions
ca0de0a SGXKM: Make the DMM offset optional
728735b gralloc: add support for GRALLOC_USAGE_EXCLUSIVE_DISP
94e04b9 gralloc: publicly define omap specific usage flags
042ea4b SGX-KM: Block DPLL cascading when SGX clock is enabled
165c85b SGX-KM: Hold wake lock during hardware recovery
929500b SGX-KM: Add logging of thermal events
660a0a1 SGX-KM: Add cooling device interface
9e38a0f SGX-KM: Add asynchronous frequency limiting to DVFS
62d655d SGX-KM: Add DVFS active modes
817a570 SGX-UM: Add DVFS idle modes
0929da9 SGX-KM: Add DVFS idle modes
e08cfd1 SGX-KM: Make APM configurable by module parameter
f143bf5 SGX-KM: Adapt to device_scale interface change in K3.4
63d6958 SGXKM: Fix NULL handle warning when blitting GC320
9fd3064 SGXKM: Allow for late or no GPU mapping
dfe9ecc SGXKM: Allow for SW access to a tiler buffer
72cf1b6 SGXUM: Adds YUV plane offsets for MM
85c57b2 SGXKM: SGX Tiler non-page-aligned support
a3baf57 SGXUM: Implements GPU Common Buffer Interface
6ab6df3 SGXUM: Multi-buffer manage bridge
1790c15 SGXKM: Multi-buffer manage bridge
d634926 SGXKM: Implements Heap Alloc Failure Report
9c814f5 SGXUM: Add support for GPU unmap/remap
6f033e0 SGXKM: Add support for GPU unmap/remap
798ff60 SGX-KM: Use CONFIG_DRM_OMAP_DMM_TILER for kernel 3.4
4ebb646 SGX-KM: Use pud_offset to get pmd_offset
848c3db PVR-KM: Prevent compilation of dc_omapfb3_linux
7191727 SGX-KM: Remove hardcoding of values in egl.cfg
22a1807 pvr-km: kfree phys info at unmap instead of map
c82dd99 pvr-km: add a struct size to the physical descriptor
9cdb86a gralloc: Set flag to enable GC MMU mapping in PVR services
1e3f5c1 PVR-KM: Add function to obtain BV descriptor through 3PDC interface
b6201dc PVR-KM: Map buffers to GC core MMU on allocation time with Bltsville
aebdf3c SGXKM: Prevent mapping of export with zero ref
14de558 OMAP4-SGX-UM: Allow for tiler buffer SW access
12a331c OMAP4-SGX-UM: Gralloc SW access and caching flags
242d4e1 OMAP4-SGX-UM: Gralloc HAL_PIXEL_FORMAT_NV12 format
f11d2d8 SGX-KM: Make PVRSRVExportFDToIONHandles generic and register it with ion
97d8bd7 PVR-KM: OMAP5: Use shared device for Tiler 2D Mappings
440bf3a PVR-KM: OMAP5: Hardcode core version value
1a9f3bf SGX-KM: OMAP5: HACK: Set the size of the SGX registers
0dc79e2 SGX-UM: add detection of OMAP5432 in pvrsrvinit
b214794 SGX-UM: build: Add panda5 and omap5sevm to product list
5f9d58b SGX-KM: BUILD: Add OMAP5 support
b72daac SGX-UM: BUILD: Consolidate build into a single Makefile
dc7a006 SGX-KM: (build) Remove Android product and version dependency
dc8fe62 Build: Don't install egl.cfg anymore
8b319fc SGX-KM: egl.cfg sysfs entry
ed1e300 SGX-KM: Enable DPF, TRACE and ASSERT
4c11992 build-km: Enable blaze and blaze_tablet for ICS environment
74bfc08 build: Enable blaze and blaze_tablet for ICS environment
ae6f699 SGX-KM: Add ability to build multiple sets of GFX kernel modules
e8f6a90 build: Set correct load directory for kernel modules.
e134128 KM: add support for sgx544sc
23d2030 SGX-UM: Add ability to build multiple sets of GFX binaries
1155494 SGX-KM: Use platform data for OPP symbols.
603898e SGX-UM: Enable building binaries for specific SGX
80915d3 readme: Add README
976a182 build: Add
ab64166 Create gitignore file
7978e98 IMG DDK 1.9@2130229 for Android

Change-Id: Ibf81bf50c0e893e7b9330cf304cdfe4045696a57
Signed-off-by: Eric Luong <>
9 years agoSGX-BIN: jb built bins (1.9@2120756)
Eric Luong [Tue, 14 Aug 2012 15:32:51 +0000 (10:32 -0500)]
SGX-BIN: jb built bins (1.9@2120756)

IMG DDK Release 1.9@2120756 for Android.

Included in this release:
- User space and Kernel module binaries
- Kernel module source code

IMG changes in this release:
- Services: Improved code-style consistency in function pointer arguments
- OGLES: Added thread lock around setting of bDirtySinceLastTAKick
- OGLES2/EGL: Fixed flickering due to unsynchronised SGX usage for vertex texturing
- OGLES2/DMS: Improved triangle split to favour simpler shaders
- OGLES2: Fixed test failure with more than 32 vertex shader outputs
- Android: Enabled PVR_LINUX_MEM_AREA_POOL
- Compiler: Added backports of performance-related improvements
- OGLES2: Fixed typo in pre-processor define
- Microkernel: Added some additional MKTRACE output to aid debug

TI patches:
18545f4 SGX UM: HACK: add extra read in SGXInitialise Script 1
3f66f33 SGX-UM: OGLES2: Twiddled NPOT rounding
d414023 BUILD: fix usage and help
4a5d7c8 BUILD: Add install option "adb"
ccad4b9 pvr-km: gc: Add page offset for ion allocated buffers
b25efb8 pvr-km: gc: Improve gc map/unmap logging
64df790 gralloc: Map NV12 buffers with the GC MMU
41efdcb SGX-KM: Enable APM for OMAP5
eaef331 SGX-UM: Enable APM for OMAP5
bfe92db SGX-UM: Don't load omaplfb module when in-kernel driver is present
9172d39 SGX-KM: Support in-kernel omaplfb
742c26d SGXKM: Multi-plane support for  deviceclass i-face
811bd0b build: remove omaplfb from install step
e211e81 pvr-um: use arm-linux-androideabi- and fix JB debug build
a92d4e6 PVR-UM: Make pvrsrvinit wrapper compatible with Jellybean
1f40f26 Revert "SGXUM: Implements Gralloc late CPU mapping"
c27d071 SGX-UM: build - Remove target platform based configuration
f2ae6d6 OMAP5: BUILD: Remove unused variable
3e9dbd7 readme: Correct DDK version
7d1cddb SGX-UM: Add support for hardware specific powervr.ini files
28b77a6 PVR-UM: Add support to DDK for powervr.ini files
95a84d5 SGX-UM: Added 16 bit depth EGL configs
cb441ae SGX UM: Srvinit block until services ready
9c6bb2e SGX UM: HAL block OpenPVRServices until services initialized
3b472d5 SGX UM: Fix calculation of chroma plane in blit_internal
5efbe22 SGX KM: Dump dsscomp info during HW recovery
d14fe4e SGXKM: Adds support for 1D buffer allocation
751bf6c SGXKM: Do not perform explicit invalidate on mmap
9eb3305 SGXUM: Implements Gralloc late CPU mapping
9850dc9 SGXUM: Gralloc allow for late or no GPU mapping
14a1340 SGXUM: Add allocation of images from system heap
019f55a SGXUM: Adds A8/U8/Y8 color format to WSEGL
e2adf94 SGXKM: Increase XPROC_WORKAROUND to 500
1115ab6 SGXKM: Fix file permissions
6d12860 SGXKM: Make the DMM offset optional
103cb55 gralloc: add support for GRALLOC_USAGE_EXCLUSIVE_DISP
30fac68 gralloc: publicly define omap specific usage flags
c06fb88 gralloc: remove unused entry from public framebuffer interface
5997916 SGX-KM: Block DPLL cascading when SGX clock is enabled
42fa990 SGX-KM: Hold wake lock during hardware recovery
2abf125 SGX-KM: Add logging of thermal events
d28152d SGX-KM: Add cooling device interface
26624e9 SGX-KM: Add asynchronous frequency limiting to DVFS
58c447d SGX-KM: Add DVFS active modes
accad20 SGX-UM: Add DVFS idle modes
62c7a32 SGX-KM: Add DVFS idle modes
294d2af SGX-KM: Make APM configurable by module parameter
0c335cb SGX-KM: Adapt to device_scale interface change in K3.4
998aba4 SGXKM: Fix NULL handle warning when blitting GC320
5768343 SGXKM: Allow for late or no GPU mapping
61609e9 SGXKM: Allow for SW access to a tiler buffer
dd3c012 SGXUM: Adds YUV plane offsets for MM
f36a3da SGXKM: SGX Tiler non-page-aligned support
44c2da3 SGXUM: Implements GPU Common Buffer Interface
b047c83 SGXUM: Multi-buffer manage bridge
cfdd961 SGXKM: Multi-buffer manage bridge
2bb94b0 SGXKM: Implements Heap Alloc Failure Report
5a45782 SGXUM: Add support for GPU unmap/remap
ebc2bd0 SGXKM: Add support for GPU unmap/remap
4a5fd83 SGX-KM: Use CONFIG_DRM_OMAP_DMM_TILER for kernel 3.4
4901b49 SGX-KM: Use pud_offset to get pmd_offset
5f89966 PVR-KM: Prevent compilation of dc_omapfb3_linux
efd39d6 SGX-KM: Remove hardcoding of values in egl.cfg
3c8fc10 pvr-km: kfree phys info at unmap instead of map
29d47a7 pvr-km: add a struct size to the physical descriptor
dcaf4f9 gralloc: Set flag to enable GC MMU mapping in PVR services
ad18c89 PVR-KM: Add function to obtain BV descriptor through 3PDC interface
1bf9204 PVR-KM: Map buffers to GC core MMU on allocation time with Bltsville
6963019 SGXKM: Prevent mapping of export with zero ref
cd992b5 OMAP4-SGX-UM: Allow for tiler buffer SW access
89dcbcf OMAP4-SGX-UM: Gralloc SW access and caching flags
90e24fa OMAP4-SGX-UM: Gralloc HAL_PIXEL_FORMAT_NV12 format
6b7bdb0 SGX-KM: Make PVRSRVExportFDToIONHandles generic and register it with ion
1b80633 PVR-KM: OMAP5: Use shared device for Tiler 2D Mappings
37cf29e PVR-KM: OMAP5: Hardcode core version value
e2ba8bc SGX-KM: OMAP5: HACK: Set the size of the SGX registers
2daff47 SGX-UM: add detection of OMAP5432 in pvrsrvinit
090bd59 SGX-UM: build: Add panda5 and omap5sevm to product list
97faede SGX-KM: BUILD: Add OMAP5 support
436c1c0 SGX-UM: BUILD: Consolidate build into a single Makefile
374727e SGX-KM: (build) Remove Android product and version dependency
1d800ed Build: Don't install egl.cfg anymore
2112d08 SGX-KM: egl.cfg sysfs entry
f94a224 SGX-KM: Enable DPF, TRACE and ASSERT
8784fd5 build-km: Enable blaze and blaze_tablet for ICS environment
6343236 build: Enable blaze and blaze_tablet for ICS environment
e6d71d1 SGX-KM: Add ability to build multiple sets of GFX kernel modules
a416ebd build: Set correct load directory for kernel modules.
9e396ec KM: add support for sgx544sc
0e0a3e7 SGX-UM: Add ability to build multiple sets of GFX binaries
b5360e4 gralloc: Add field for bin. compat. with HWC hal_public.h
0734cf1 SGX-KM: Use platform data for OPP symbols.
1918ea8 SGX-UM: Enable building binaries for specific SGX
b7084d9 readme: Add README
e4ea2fb build: Add
355a54d Create gitignore file

Signed-off-by: Eric Luong <>
Change-Id: I3067705eb2bf3f6a98628b697319d933c62fc6a3

9 years agoproprietary-open: rule to install wpan fw
Pavan Savoy [Fri, 3 Aug 2012 21:02:16 +0000 (16:02 -0500)]
proprietary-open: rule to install wpan fw

Use this rule to install all wpan related firmware files.
The wpan archive needs to maintain the folder structure of

Patch modified from original - Mark Lifshits <>
Signed-off-by: Pavan Savoy <>
Modified to install only in the intermediates directory, and not to
remove artifacts from the intermediates directory.

Change-Id: I26a0669eea1a7b7b26ad6a2a780ad0d098f477d0
Signed-off-by: James W. Mills <>
9 years agowlan: Upgrading firmware to R5.SP2.04
Panduranga Mallireddy [Mon, 6 Aug 2012 15:37:29 +0000 (10:37 -0500)]
wlan: Upgrading firmware to R5.SP2.04

Firmware for WL128X:
wl128x-fw-4-sr.bin    FRev
wl128x-fw-4-plt.bin   FPLT
wl128x-fw-4-mr.bin    FRev

Firmware for WL127X:
wl127x-fw-4-sr.bin    FRev
wl127x-fw-4-plt.bin   FPLT
wl127x-fw-4-mr.bin    FRev

Change-Id: Ia79f74bb7b845d510d8e0b94e56d9d3d6a389ed9
Signed-off-by: Panduranga Mallireddy <>
9 years agoMerge "wpan: BT HF configuration for I2S mode" into jb-release
Keith Deacon [Tue, 31 Jul 2012 05:50:18 +0000 (00:50 -0500)]
Merge "wpan: BT HF configuration for I2S mode" into jb-release

9 years agoSGX-BIN: jb built bins (1.9@956766)
Tony Lofthouse [Thu, 26 Jul 2012 21:47:05 +0000 (16:47 -0500)]
SGX-BIN: jb built bins (1.9@956766)

DDK1.9 is the officially supported SGX release for JB

This package depends on the p-android-omap-3.0-dev kernel with:

b49820d omaplfb: Add omaplfb to the kernel tree
48501089 blaze_defconfig: Add KPROBES and RELAY dynamic instrumentation
1558094 blaze_defconfig: Enable SCHED_TRACER

Change-Id: I40b3dd8e561fa7fa1c676a181274fdbf169fcca3
Signed-off-by: Tony Lofthouse <>
9 years agoSGX prebuilt binaries: Untar to and copy from intermediate directories.
Luis Gonzalez [Fri, 1 Jun 2012 18:46:34 +0000 (13:46 -0500)]
SGX prebuilt binaries: Untar to and copy from intermediate directories.

This will untar SGX prebuilt binaries to an intermediate directory and
install them in the Android filesystem without polluting the git tree
with untracked files.

Change-Id: I806a9aa4a939b6109399df999603706e3c34f17e

9 years agoproprietary-open: wlan: move to tgz tarball
Vishal Mahaveer [Fri, 29 Jun 2012 17:09:17 +0000 (12:09 -0500)]
proprietary-open: wlan: move to tgz tarball

Move WLAN firmware from indvidual files to tar ball approach.
Based on the way ducati binaries are handled.

Change-Id: I66bfec1b0fb01f36a4508922d0e4919d6bb1eeb0
Signed-off-by: Vishal Mahaveer <>
9 years agowpan: BT HF configuration for I2S mode
Shitiz Kumar [Tue, 10 Jul 2012 19:03:26 +0000 (14:03 -0500)]
wpan: BT HF configuration for I2S mode

Bluetooth HF data interface has been configured to I2S mode
from PCM mode.
The new configuration configures BT chip for 8k sample rate,
stereo mode, BCLK-256k

FYSNC when CLK  @falling edge
FSYNC polarity- Active Low
CH1 TX driven at:  @falling edge
CH1 RX sampled at: @rising edge
CH2 TX driven at:  @falling edge
CH2 RX sampled at: @rising edge

Change-Id: I31dcb2a5d717d553230ddd07f909c82dd349201f
Signed-off-by: Shitiz Kumar <>
Signed-off-by: Manjunatha Halli <>
9 years agoMerge "SGX-BIN: jb built bins (1.8@945322) + patches #1" into jb-release
Hemant Hariyani [Thu, 19 Jul 2012 03:42:08 +0000 (22:42 -0500)]
Merge "SGX-BIN: jb built bins (1.8@945322) + patches #1" into jb-release

9 years agoSGX-BIN: jb built bins (1.8@945322) + patches #1
Tony Lofthouse [Wed, 18 Jul 2012 21:35:29 +0000 (16:35 -0500)]
SGX-BIN: jb built bins (1.8@945322) + patches #1

937f180 omaplfb: Allocate a clear buffer with 8 pixel stride per GC requ
6bfc77e omaplfb: Remove batching all blits per frame
1ab6738 SGX UM: Srvinit block until services ready

Change-Id: I8ffe3d362d2f593255f743a723cf88f4987841d4
Signed-off-by: Tony Lofthouse <>
9 years agoUpdated Ducati binary for blaze_tablet to version 2.1.10
Daniel Levin [Fri, 13 Jul 2012 16:48:19 +0000 (19:48 +0300)]
Updated Ducati binary for blaze_tablet to version 2.1.10

Change-Id: Id5bb8fd214ba98d1f92f2d2222dc8c41739f9ef1
Signed-off-by: Daniel Levin <>
9 years agoSGX-BIN: jb built bins (1.8@945322)
James Mills [Wed, 11 Jul 2012 04:00:25 +0000 (23:00 -0500)]
SGX-BIN: jb built bins (1.8@945322)

        7d95406 pvr-km: Do not strip debug symbols from kernel module
        582d243 SGXKM: Incresed XPROC_WORKAROUND to 500
        1a96424 SGX UM: HAL block OpenPVRServices until services initialized
        ccf4286 SGXUM: Add allocation of images from system heap
        6a61ac6 SGXKM: Adds support for 1D buffer allocation
        a7bb574 SGXKM: Make the DMM offset optional
        e579ec6 Merge branch 'img_ddk_1.8' into ti_ics_1.8 (DDK 1.8@945322)
        befcaa3 Revert "SGXUM: Add allocation of images from system heap"
        2a6a57a Revert "SGXKM: Add allocation from ION system heap"
        d3f79fb Revert "SGX UM: Bridge lock rework"
        db5672c Revert "SGX KM: Bridge lock rework"
        5cfc1aa gralloc: add support for GRALLOC_USAGE_EXCLUSIVE_DISP
        88b43ea gralloc: publicly define omap specific usage flags
        8b9555d gralloc: remove unused entry from public framebuffer interface
        ef2bc78 Merge "PVR-UM/KM: Support Jellybean build" into ti_ics_1.8
        8247309 Merge "PVR-UM: Make pvrsrvinit wrapper compatible with Jellybean
        0d7410c PVR-UM/KM: Support Jellybean build
        f269b1f PVR-UM: Make pvrsrvinit wrapper compatible with Jellybean

    Change-Id: Ic6a09d5f6f3a266c83da12b472d367042ac47c38
Signed-off-by: Tony Lofthouse <>
Change-Id: Ic67c6466162669bd4c517faa56b897d2b71ff323

9 years agoSGX-BIN: DDK update 1.8@945322
Tate Hornbeck [Wed, 27 Jun 2012 22:34:49 +0000 (17:34 -0500)]
SGX-BIN: DDK update 1.8@945322

7d95406 pvr-km: Do not strip debug symbols from kernel module
582d243 SGXKM: Incresed XPROC_WORKAROUND to 500
1a96424 SGX UM: HAL block OpenPVRServices until services initialized
ccf4286 SGXUM: Add allocation of images from system heap
6a61ac6 SGXKM: Adds support for 1D buffer allocation
a7bb574 SGXKM: Make the DMM offset optional
e579ec6 Merge branch 'img_ddk_1.8' into ti_ics_1.8 (DDK 1.8@945322)
befcaa3 Revert "SGXUM: Add allocation of images from system heap"
2a6a57a Revert "SGXKM: Add allocation from ION system heap"
d3f79fb Revert "SGX UM: Bridge lock rework"
db5672c Revert "SGX KM: Bridge lock rework"

Change-Id: I6a5c003b47a338dd3d6893741b3dd1019e1ad4bd
Signed-off-by: Tate Hornbeck <>
9 years agoMerge "[WFD]: Added WFD specific make files and Sharedlibraries." into ics-mr1
Keith Deacon [Tue, 26 Jun 2012 20:23:47 +0000 (15:23 -0500)]
Merge "[WFD]: Added WFD specific make files and Sharedlibraries." into ics-mr1

9 years agoSGX-BIN: DDK update
Tony Lofthouse [Fri, 22 Jun 2012 22:08:07 +0000 (17:08 -0500)]
SGX-BIN: DDK update

5cfc1aa gralloc: add support for GRALLOC_USAGE_EXCLUSIVE_DISP
88b43ea gralloc: publicly define omap specific usage flags
8b9555d gralloc: remove unused entry from public framebuffer interface
0d7410c PVR-UM/KM: Support Jellybean build
f269b1f PVR-UM: Make pvrsrvinit wrapper compatible with Jellybean

Kernel modules built against:
Kernel Version: 3.0.31 with CONFIG_MODVERSIONS=y
Kernel branch: p-android-omap-3.0-dev
At least commit 7d242d0771584e7fe33603e230dc4e5f8bf7b9f6

Change-Id: Ie591b96dc2155d4d7394b98284948366876d91c0
Signed-off-by: Tony Lofthouse <>
Signed-off-by: Hemant Hariyani <>
9 years ago[WFD]: Added WFD specific make files and Sharedlibraries.
Santhosh Behara [Fri, 22 Jun 2012 05:19:16 +0000 (10:49 +0530)]
[WFD]: Added WFD specific make files and Sharedlibraries.

Description: Added Wifi Display related make files and the corresponding
shared libraries( and

Change-Id: I3bebd6ed8c936dc1e8657d7a2526cee38172e64d
Signed-off-by: Santhosh Behara <>
9 years agoSGX-BIN: Rebuilt for 512MB feature
Tate Hornbeck [Tue, 19 Jun 2012 23:33:09 +0000 (18:33 -0500)]
SGX-BIN: Rebuilt for 512MB feature

The 512MB feature changed the ABI between
kernel and SGX modules and thus required
a rebuild.

Change-Id: I5026905026f10f66cc741799f81da87cd137c25d
Signed-off-by: Tate Hornbeck <>
9 years agoSGX BIN: omaplfb changes
Tate Hornbeck [Fri, 15 Jun 2012 20:53:49 +0000 (15:53 -0500)]
SGX BIN: omaplfb changes

- omaplfb: Remove buffer skipping when allocating swapchain
- omaplfb: bv: Set BVBATCH_DST when destination format changes

Change-Id: I83e1969baa1f75d0999abeda7e45518a36aba479
Signed-off-by: Tate Hornbeck <>
9 years agoSGX-BIN: SGX Driver update for CONFIG_MODVERSIONS
Tate Hornbeck [Wed, 13 Jun 2012 20:40:58 +0000 (15:40 -0500)]

These binaries have been built against kernel
version 3.0.31 with CONFIG_MODVERSIONS enabled.
Depends on .

Change-Id: Ia09c83d31fdc5e661c93bf3cfcb065fc550d0031
Signed-off-by: Tate Hornbeck <>
9 years agoSGX-BIN: SGX Driver update
Tate Hornbeck [Tue, 12 Jun 2012 16:56:13 +0000 (11:56 -0500)]
SGX-BIN: SGX Driver update

Rebuilt for compatibility with DSSCOMP mem2mem
writeback support that was introduced by .

Change-Id: I9b7f97d922c561d10b92a19645a4da7d6285f074
Signed-off-by: Tate Hornbeck <>
9 years agoSGX-BIN: SGX Driver (1.8@869593) with CPCAM support
Tate Hornbeck [Mon, 21 May 2012 17:35:49 +0000 (12:35 -0500)]
SGX-BIN: SGX Driver (1.8@869593) with CPCAM support

This SGX binary package has all necessary CPCAM
patches included. A new README.SGX is now located
in device/ti/proprietary-open/omap4 with the commit
id and branch that these binaries were built from.
The SGX kernel side source has now moved to

Change-Id: I57288feaa4e5eb95d651931db9cc8e6000a38db8
Signed-off-by: Tate Hornbeck <>
9 years agowlan: Upgrading firmware to R5.00.18 package from R5.00.14
Panduranga Mallireddy [Thu, 10 May 2012 20:00:32 +0000 (15:00 -0500)]
wlan: Upgrading firmware to R5.00.18 package from R5.00.14

Firmware for WL128X:
wl128x-fw-4-sr.bin    FRev
wl128x-fw-4-plt.bin   FPLT
wl128x-fw-4-mr.bin    FRev

Firmware for WL127X:
wl127x-fw-4-sr.bin    FRev
wl127x-fw-4-plt.bin   FPLT
wl127x-fw-4-mr.bin    FRev

R5.00.18 package upgradation needs the following patches also:
    for hardware/ti/wlan:
    for external/wpa_supplicant_8:

Change-Id: Id1081914342b297e7bbefd3d9ba89ac0acbd434c
Signed-off-by: Panduranga Mallireddy <>
9 years agoSGX-BIN: Update SGX driver (1.8@869593)
Tate Hornbeck [Thu, 3 May 2012 20:56:14 +0000 (15:56 -0500)]
SGX-BIN: Update SGX driver (1.8@869593)

Bug fixes:
- glCopyTexSubImage2D texture corruption
- PVR2D blit Y plane offset
- SGXCleanupRequest kernel panic
- OMAPLFB memory leak

Change-Id: Id567894463358eb5f54ed939d752939e9390083d
Signed-off-by: Tate Hornbeck <>
9 years agoMerge "Updated COM6/7 Firmware for R8.a1.05 driver" into ics-mr1
Jean Johnson [Thu, 26 Apr 2012 13:41:29 +0000 (08:41 -0500)]
Merge "Updated COM6/7 Firmware for R8.a1.05 driver" into ics-mr1

9 years agoMerge "wpan: remove BT/FM/NFC WL8 firmware" into ics-mr1
Keith Deacon [Wed, 25 Apr 2012 23:13:20 +0000 (18:13 -0500)]
Merge "wpan: remove BT/FM/NFC WL8 firmware" into ics-mr1

9 years agoMerge "wl12xx: Add BTFM firmwares for COM7 chipset" into ics-mr1
Keith Deacon [Wed, 25 Apr 2012 23:13:10 +0000 (18:13 -0500)]
Merge "wl12xx: Add BTFM firmwares for COM7 chipset" into ics-mr1

9 years agoUpdated COM6/7 Firmware for R8.a1.05 driver
Pradeep Gurumath [Mon, 23 Apr 2012 15:54:02 +0000 (10:54 -0500)]
Updated COM6/7 Firmware for R8.a1.05 driver

Adding an upgraded firmware for COM6/7 corresponding to R8.a1.05 driver

Firmware version number:

For 128x:
wl128x-fw-4-sr.bin: FRev
wl128x-fw-4-mr.bin: FRev
wl128x-fw-4-plt.bin: FPLT

For 127x:
wl127x-fw-4-sr.bin: FRev
wl127x-fw-4-mr.bin: FRev
wl127x-fw-4-plt.bin: FPLT

Upgrade to NLCP R8_a1_05 package requires the following patches also:


Change-Id: Ia4e29d62a431ce50ae7b987e742417b091f1701d
Signed-off-by: Pradeep Gurumath <>
9 years agowpan: remove BT/FM/NFC WL8 firmware
Pavan Savoy [Mon, 23 Apr 2012 15:06:26 +0000 (10:06 -0500)]
wpan: remove BT/FM/NFC WL8 firmware

Remove Bluetooth, fmradio and NFC firmware.

Change-Id: I0f0e14717126f7547f6501f90d7c8abb97da60c0
Signed-off-by: Pavan Savoy <>
9 years agowl12xx: Add BTFM firmwares for COM7 chipset
Shitiz Kumar [Mon, 16 Apr 2012 20:48:21 +0000 (15:48 -0500)]
wl12xx: Add BTFM firmwares for COM7 chipset

This patch updates BT script to NLCP R5.0 RC4

1) TIInit_10.6.15.bts - SP 2.3

Change-Id: I45b95b26e866ac7e8497d680fdf5343f10dda6ee
Signed-off-by: Shitiz Kumar <>
9 years agowl12xx:wlan: Remove wl18xx firmware file
Vishal Mahaveer [Mon, 23 Apr 2012 14:13:17 +0000 (09:13 -0500)]
wl12xx:wlan: Remove wl18xx firmware file

Remove wl18xx firmware file till we figure out the right license

Change-Id: I639f99e4560f4831382d5e03ce01b8236f43e504
Signed-off-by: Vishal Mahaveer <>
9 years agoMove subdir include to top of
James W. Mills [Thu, 19 Apr 2012 00:10:19 +0000 (19:10 -0500)]
Move subdir include to top of

Having the inclusion at the bottom of the is
causing it to be ignored, which meand SGX/wlan/etc are no longer
installed.  Moving it to the top makes it work, and the subsequent
ducati definition works as well.

Change-Id: Idcbce941b9e3b60906421b0cf944160d41ac027b
Signed-off-by: James W. Mills <>
9 years agoMerge "Updated Ducati installation logic" into ics-mr1
Jean Johnson [Wed, 18 Apr 2012 15:54:45 +0000 (10:54 -0500)]
Merge "Updated Ducati installation logic" into ics-mr1

9 years agoUpdated Ducati installation logic
James W. Mills [Thu, 12 Apr 2012 19:06:05 +0000 (14:06 -0500)]
Updated Ducati installation logic

This patch moves the ducati installation logic into the top-level for proprietary-open, and generalizes the procedure so that
new devices can be added easily.  Benefis include:

* Unpacking into an intermediate location

* Only unpacked if enabled for a specific device

* All devices can use the same PRODUCT_PACKAGE definition

* User-defined ducati TGZ location

Change-Id: I48314920b138230e73b3a56e1ff899ad82289b59
Signed-off-by: James W. Mills <>
9 years agoSGX-BIN: Update SGX driver
Gustavo Diaz Prado [Fri, 13 Apr 2012 21:39:30 +0000 (16:39 -0500)]
SGX-BIN: Update SGX driver

Contains SGX user mode binaries and kernel modules.
Required kernel version: 3.0.21-00003-OMAP-Android

This update contains the following features:
+ omaplfb: Give support for dirty region handling
+ omaplfb: Use platform data for configuration
+ omaplfb and PVR services changes according to
  Bltsville header file updates

Change-Id: I2d13121f0d6e6519c5d9b235ce05329a0c1aaf55
Signed-off-by: Gustavo Diaz Prado <>
9 years agoSGX-BIN: Update SGX driver (1.8@869593)
Hemant Hariyani [Sat, 7 Apr 2012 03:34:11 +0000 (22:34 -0500)]
SGX-BIN: Update SGX driver (1.8@869593)

Contains SGX user mode binaries and kernel modules.
Required kernel version: 3.0.21-00002-OMAP-Android

Change-Id: Ib4adddd90f691de17756f6e4042d04d5d8d27f1f
Signed-off-by: Hemant Hariyani <>
9 years agoSGX-BIN: Update SGX driver (1.8@866404)
Tate Hornbeck [Wed, 28 Mar 2012 17:46:15 +0000 (12:46 -0500)]
SGX-BIN: Update SGX driver (1.8@866404)

Contains SGX user mode binaries and kernel modules.
Required kernel version: 3.0.21-00002-OMAP-Android

Change-Id: I22e6a877af3dddc9953dcf76d3e472aacad67f55
Signed-off-by: Tate Hornbeck <>
9 years agoMerge "Updated COM8 Firmware for R8.a1.03 driver" into ics-mr1
Jean Johnson [Wed, 28 Mar 2012 16:00:36 +0000 (16:00 +0000)]
Merge "Updated COM8 Firmware for R8.a1.03 driver" into ics-mr1

9 years agoMerge "wl12xx: Add BTFM firmwares for COM8 chipset" into ics-mr1
Jean Johnson [Tue, 27 Mar 2012 21:24:19 +0000 (16:24 -0500)]
Merge "wl12xx: Add BTFM firmwares for COM8 chipset" into ics-mr1

9 years agoSGX-BIN: Update SGX driver (1.8@840215+)
Tate Hornbeck [Fri, 23 Mar 2012 22:45:16 +0000 (17:45 -0500)]
SGX-BIN: Update SGX driver (1.8@840215+)

bug fixes

Change-Id: Ia3c74ac631165ae3333774215aa2ded2e1bed2e1
Signed-off-by: Tate Hornbeck <>
9 years agowl12xx: Add BTFM firmwares for COM8 chipset
Shitiz Kumar [Fri, 23 Mar 2012 21:20:32 +0000 (16:20 -0500)]
wl12xx: Add BTFM firmwares for COM8 chipset

This patch adds below scripts

1) TIInit_12.7.27.bts - SP 1.3
2) fmc_ch8_1893.2.bts - v 1.6
3) fm_rx_ch8_1893.2.bts - v 1.6
4) fm_tx_ch8_1893.2.bts - v 1.6
5) TIInit_11.7.27.bts - SP 1.3

Change-Id: Ib5655d16278b30fd55b55e36aad7a38fcda35bf9
Signed-off-by: Shitiz Kumar <>
9 years agowpan:nfc: Adding new firmware file
x0099048 [Wed, 21 Mar 2012 22:16:17 +0000 (17:16 -0500)]
wpan:nfc: Adding new firmware file

Addng the new firmware file for NFC to
support NCI draft 9

Signed-off-by: x0099048 <>
       amir <>

Change-Id: I4688ad776bada9d297d50ac206aae3d7a0d00c38

9 years agoUpdated COM8 Firmware for R8.a1.03 driver
Pradeep Gurumath [Thu, 22 Mar 2012 22:44:45 +0000 (17:44 -0500)]
Updated COM8 Firmware for R8.a1.03 driver

Adding a new set of firmware for COM8 corresponding to R8.a1.03 driver

Firmware version number:
wl18xx-fw.bin       :   FRev

Change-Id: Ic27e922ad5455aece8cc474705ea6968d0d7e082
Signed-off-by: Pradeep Gurumath <>
9 years agoSGX-BIN: Update SGX driver (1.8@840215+fixes)
Hemant Hariyani [Thu, 22 Mar 2012 02:14:00 +0000 (21:14 -0500)]
SGX-BIN: Update SGX driver (1.8@840215+fixes)

Contains SGX user mode binaries and kernel modules.
Required kernel version: 3.0.21-00002-OMAP-Android

Change-Id: Ie994cb53dfe1e85adf8d0f949abd03bc3fd42e63
Signed-off-by: Hemant Hariyani <>
9 years agoMerge "SGX-BIN: Update SGX driver (1.8@840215) w/SGX kernel modules" into ics-mr1
Jean Johnson [Tue, 20 Mar 2012 15:55:56 +0000 (15:55 +0000)]
Merge "SGX-BIN: Update SGX driver (1.8@840215) w/SGX kernel modules" into ics-mr1

9 years agoSGX-BIN: Update SGX driver (1.8@840215) w/SGX kernel modules
Hemant Hariyani [Wed, 14 Mar 2012 04:57:12 +0000 (23:57 -0500)]
SGX-BIN: Update SGX driver (1.8@840215) w/SGX kernel modules

DDK upgrade - 1.8@840215
Also, SGX kernel driver is now built as a separate module. In-kernel
driver should not be used. This binary includes pre-built

Change-Id: I0259aefa62ceef52c0b734a77a86a02258f88922
Signed-off-by: Hemant Hariyani <>
9 years agoUpdated COM8 Firmware for R8.a1.02 driver
Pradeep Gurumath [Mon, 5 Mar 2012 23:14:36 +0000 (17:14 -0600)]
Updated COM8 Firmware for R8.a1.02 driver

Adding a new set of firmware for COM8 corresponding to R8.a1.02 driver

Firmware version number:
wl18xx-fw.bin       :   FRev

Change-Id: Idb1ed7b1237a6bfc0ce1f057ba43906e10e5e8b6
Signed-off-by: Pradeep Gurumath <>
9 years agoMerge "[proprietary-open] Upload R5_00_08 wl12xx firmware files" into ics-mr1
Vicky Martinez-DeFrain [Mon, 5 Mar 2012 22:10:15 +0000 (16:10 -0600)]
Merge "[proprietary-open] Upload R5_00_08 wl12xx firmware files" into ics-mr1

9 years agoMerge "[proprietary-open]: wl12xx: Upload WLAN R5_00_05 firmware files" into ics-mr1
Vicky Martinez-DeFrain [Mon, 5 Mar 2012 22:04:15 +0000 (16:04 -0600)]
Merge "[proprietary-open]: wl12xx: Upload WLAN R5_00_05 firmware files" into ics-mr1

9 years ago[proprietary-open] Upload R5_00_08 wl12xx firmware files
Panduranga Mallireddy [Thu, 16 Feb 2012 21:48:33 +0000 (15:48 -0600)]
[proprietary-open] Upload R5_00_08 wl12xx firmware files

Added new firmware files for wl128x /wl127x from R5_00_08 package

Change-Id: I665d478e7b50d78a730c6fade8df7af1cc6cf667
Signed-off-by: Panduranga Mallireddy <>
9 years ago[proprietary-open]: wl12xx: Upload WLAN R5_00_05 firmware files
Panduranga Mallireddy [Sun, 12 Feb 2012 23:36:57 +0000 (17:36 -0600)]
[proprietary-open]: wl12xx: Upload WLAN R5_00_05 firmware files

Upload WLAN R5_00_05 firmware files to proprietary-open.

Change-Id: I1f530357cf80aea82794c46198027c6cc3a8944c
Signed-off-by: Panduranga Mallireddy <>
9 years agoBT: Upgraded BT firmware to Service Pack 1.2
Shitiz Kumar [Thu, 23 Feb 2012 23:34:59 +0000 (17:34 -0600)]
BT: Upgraded BT firmware to Service Pack 1.2

    SP1.2 @TI_P1.38

Change-Id: I6cc49cb13752e1d430c022f51538b6bb5df3283a
Signed-off-by: Shitiz Kumar <>
9 years agodevice:ti:proprietary-open: Add BT firmware script for COM8
Manjunatha Halli [Wed, 15 Feb 2012 18:13:27 +0000 (12:13 -0600)]
device:ti:proprietary-open: Add BT firmware script for COM8

Also this patch adds firmware scripts for FM TX on COM6 modules.

Should be merged with:

Change-Id: Ibb69f649a67e37fa8efee30889e3297e559bb540
Signed-off-by: Manjunatha Halli <>
9 years agoSGX: DDK upgrade with NV12 texture fix on 1.8@796887
Hemant Hariyani [Tue, 21 Feb 2012 22:32:52 +0000 (16:32 -0600)]
SGX: DDK upgrade with NV12 texture fix on 1.8@796887

This upgrade fixes the problem where NV12 texture was not visible
when there was an RGB layer on top.

Change-Id: I206954e8e468f402e7ce19d779d5bf066578d339
Signed-off-by: Hemant Hariyani <>
9 years agoMerge "SGX: Upgrade SGX driver to version 1.8@796887" into ics-mr1
Jean Johnson [Thu, 16 Feb 2012 21:50:26 +0000 (15:50 -0600)]
Merge "SGX: Upgrade SGX driver to version 1.8@796887" into ics-mr1

9 years agoSGX: Upgrade SGX driver to version 1.8@796887
Hemant Hariyani [Thu, 16 Feb 2012 18:06:20 +0000 (12:06 -0600)]
SGX: Upgrade SGX driver to version 1.8@796887

SGX binaries for OMAP4. Version 1.8@796887.

Change-Id: I2b79d9c275a6519d1f9aea06fe6c6ae9d90b839a
Signed-off-by: Hemant Hariyani <>
9 years agodevice:ti:proprietary-open: add wpan firmware
Pavan Savoy [Thu, 2 Feb 2012 18:06:57 +0000 (12:06 -0600)]
device:ti:proprietary-open: add wpan firmware

Add the wpan.tgz firmware tarball which constitutes of the firmware and the
right LICENSE for them.
Also add in the line in to untar them to the relevant folder from
where they will be picked up to be installed into the relevant folder on

Change-Id: Ie2a7af0febb072862bbeb45039625ba810923766
Signed-off-by: Pavan Savoy <>

Signed-off-by: Pavan Savoy <>
9 years agoMerge "SGX: DDK update for 2D blit support" into ics-mr1
Jean Johnson [Sat, 28 Jan 2012 06:12:36 +0000 (00:12 -0600)]
Merge "SGX: DDK update for 2D blit support" into ics-mr1

9 years agoSGX: DDK update for 2D blit support
Tony Lofthouse [Sat, 28 Jan 2012 03:55:01 +0000 (21:55 -0600)]
SGX: DDK update for 2D blit support

From ti_ics_1.8


d932e8d Merge "Gralloc: fb: Add a flag to force searching a free framebuffer if needed" into t

Change-Id: Ieb454b19c645b6a2ad77136b13f326d50f3f53d0
Signed-off-by: Tony Lofthouse <>
9 years agoUpdate ducati mk files to use literal TARGET_PRODUCT values
James W. Mills [Fri, 27 Jan 2012 18:44:59 +0000 (12:44 -0600)]
Update ducati mk files to use literal TARGET_PRODUCT values

The build system sources ALL devices during the lunch command, and
this is causing it to look for ducati_$(TARGET_PRODUCT) files even
when there are not any.  Rewritten to be explicit about full_blaze and
blaze_tablet so that all devices behave as expected.

Change-Id: Ib73156f330b449682394e7fe7812d6f4e3a75a97
Signed-off-by: James W. Mills <>
9 years agoUpdated GFX for both 4430/60 and 4470
James W. Mills [Fri, 27 Jan 2012 00:23:04 +0000 (18:23 -0600)]
Updated GFX for both 4430/60 and 4470

These drivers should work for both 4430/4460 and 4470 boards

Change-Id: I67bf4d910ac776960aad6d043cd553cc6d545561
Signed-off-by: James W. Mills <>
9 years agoDucati binary fw and DCC files for Blaze
James W. Mills [Tue, 24 Jan 2012 20:53:48 +0000 (14:53 -0600)]
Ducati binary fw and DCC files for Blaze

This patch includes the files needed to install Ducati fw and DCC
files for the Blaze.

Versions of Ducati can be dropped in with an accompanying mk file, and
each device capable of using that version of ducati can include the
makefile at the device level.

Change-Id: I10a61dab74b18acc2de3d2af93094009770baba2
Signed-off-by: James W. Mills <>
9 years agoDucati binary fw and DCC files for Blaze Tablet
James W. Mills [Tue, 17 Jan 2012 20:25:14 +0000 (14:25 -0600)]
Ducati binary fw and DCC files for Blaze Tablet

This patch includes the files needed to install Ducati fw and DCC
files for the Blaze Tablet.

Versions of Ducati can be dropped in with an accompanying mk file, and
each device capable of using that version of ducati can include the
makefile at the device level

Change-Id: I1df3fb99eac48106032a404184f09668d0148cda
Signed-off-by: James W. Mills <>
9 years ago[proprietary-open] Update WLAN firmware file
Vishal Mahaveer [Thu, 12 Jan 2012 21:01:58 +0000 (15:01 -0600)]
[proprietary-open] Update WLAN firmware file

Updating WLAN firmware and plt files
  wl128x - to
  wl127x - to

Change-Id: I8fe5996bfcb26d517253f9e24ec43c73f878f7f9
Signed-off-by: Vishal Mahaveer <>
9 years ago[proprietary-open] Update WLAN firmware file
Vishal Mahaveer [Mon, 9 Jan 2012 16:30:44 +0000 (10:30 -0600)]
[proprietary-open] Update WLAN firmware file

Updating WLAN firmware file for wl1283.

Change-Id: I4830c4a66057bd46cdcb2dc1094576f616dbcbe1
Signed-off-by: Vishal Mahaveer <>
9 years agoproprietary-open - Update wl12xx/wlan firmware
Vishal Mahaveer [Mon, 19 Dec 2011 23:46:19 +0000 (17:46 -0600)]
proprietary-open - Update wl12xx/wlan firmware

Update WLAN firmware to R4_SP2 version

Change-Id: Ibb4eb34f113e93c4c21496d0a0f592b2d66c26b8
Signed-off-by: Vishal Mahaveer <>
9 years agoUpdated DDK
James W. Mills [Wed, 21 Dec 2011 21:29:34 +0000 (15:29 -0600)]
Updated DDK

Change-Id: I3fa11aa320f825f5676f93875a44fb7c4957de34
Signed-off-by: James W. Mills <>
9 years agoNo longer force reinstallation on every build
James W. Mills [Tue, 20 Dec 2011 20:55:31 +0000 (14:55 -0600)]
No longer force reinstallation on every build

The tgz delivered content is no longer installed every time you run
make.  Instead, it adheres to normal Makefile rules.

Change-Id: Ia9f33f14b10b1706ad1f0e6d42fdeed4076b1414
Signed-off-by: James W. Mills <>
9 years agoMoved the ducati into the filesystem, and updated the module name
James W. Mills [Thu, 15 Dec 2011 01:00:29 +0000 (19:00 -0600)]
Moved the ducati into the filesystem, and updated the module name

Change-Id: I11fb179dc922118ba7e791621676d7bc6fe706ac
Signed-off-by: James W. Mills <>
9 years agoUpped the version of the DDK to match the kernel. I've also added the
James W. Mills [Wed, 14 Dec 2011 23:41:22 +0000 (17:41 -0600)]
Upped the version of the DDK to match the kernel. I've also added the file from the update DDK so that the first pass make system picks it up as expected.

Change-Id: Ief0b0d770a90c9fc8f32556204cf7e11a78ecc78
Signed-off-by: James W. Mills <>
9 years agoLicensed ducati bundle
James W. Mills [Tue, 13 Dec 2011 20:39:52 +0000 (14:39 -0600)]
Licensed ducati bundle

Release a binary version of Ducati, complete with DCC files, all under

Change-Id: I62f1784dfb1b815e8f58b69716b19bb53ca32b2e
Signed-off-by: James W. Mills <>
9 years agoMove licensed content to tgz archives
James W. Mills [Thu, 8 Dec 2011 19:11:06 +0000 (13:11 -0600)]
Move licensed content to tgz archives

This change allows all licensed material to be license-bound, and
prevents any single component from being downloaded without the proper
license agreement.

Change-Id: I353122644b1696438a7c7a33a26d43087e19440a
Signed-off-by: James W. Mills <>
9 years agoMerge "[proprietary-open] Upload WLAN firmware files" into ics-mr0
Jean Johnson [Sat, 3 Dec 2011 08:13:59 +0000 (02:13 -0600)]
Merge "[proprietary-open] Upload WLAN firmware files" into ics-mr0

9 years ago[proprietary-open] Upload WLAN firmware files
Vishal Mahaveer [Wed, 23 Nov 2011 15:21:57 +0000 (08:21 -0700)]
[proprietary-open] Upload WLAN firmware files

Upload WLAN firmware files to proprietary-open.

Change-Id: I11f99a79df511e792fa0e6d6cf5872b4b5ce7a27
Signed-off-by: Vishal Mahaveer <>
9 years agoPRODUCT PACKAGES being overwritten again
Jean Johnson [Wed, 30 Nov 2011 15:48:22 +0000 (09:48 -0600)]
PRODUCT PACKAGES being overwritten again

The PRODUCT PACKAGES list was being overwritten due use of :=
instead of += in the PRODUCT_PACKAGES assignement.

Signed-off-by: Jean Johnson <>
Change-Id: Icc6d7a53f5b56e6eb06201b6a7cfec7ca0eb06e0

9 years agoSGX-BIN: IMG DDK 1.8@550175 binaries for ICS
Hemant Hariyani [Wed, 23 Nov 2011 17:09:06 +0000 (11:09 -0600)]
SGX-BIN: IMG DDK 1.8@550175 binaries for ICS

IMG DDK 1.8@550175 binaries

Change-Id: I215a17b72d2b3a2e57e06546403a9f643cebee04
Signed-off-by: Hemant Hariyani <>
11 years agoInitial blank repo
Keith Deacon [Tue, 14 Sep 2010 06:29:08 +0000 (01:29 -0500)]
Initial blank repo