Merge "DSP: Add DSP FW image based on OMAPDSP TAG: DVP_MAINLINE; sysbios-rpmsg TAG: 1.20.09.23" into d-jb-release
DSP: Add DSP FW image based on OMAPDSP TAG: DVP_MAINLINE; sysbios-rpmsg TAG: 1.20.09.23
Change-Id: Ie514c121cbd405fd3836242bb8001af5cc794fbf
Signed-off-by: Dilip Gopalakrishna <dilip.g@ti.com>
Change-Id: Ie514c121cbd405fd3836242bb8001af5cc794fbf
Signed-off-by: Dilip Gopalakrishna <dilip.g@ti.com>
proprietary-open: Add BLE enabled WL128x firmware
WL128x PG2.0 firmware didn't have BLE enabled. This COM7 PG2.0 module found on
most OMAP4 Tablet2 & Blaze does have LE capability in controller which wasn't
enabled.
The host stack BlueTI has BLE enabled and so does the framework, Settings.apk
support scanning/pairing with LE devices.
Change-Id: I14efd8eb818f763ee7e070003a0f93226e0e6218
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
WL128x PG2.0 firmware didn't have BLE enabled. This COM7 PG2.0 module found on
most OMAP4 Tablet2 & Blaze does have LE capability in controller which wasn't
enabled.
The host stack BlueTI has BLE enabled and so does the framework, Settings.apk
support scanning/pairing with LE devices.
Change-Id: I14efd8eb818f763ee7e070003a0f93226e0e6218
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
DSP: Add initial firmware image based on
sysbios-rpmsg tag: 1.20.09.23
This commit adds a sample dsp firmware image
built from the sysbios-rpmsg tree with tag
specified above.
Signed-off-by: Dilip Gopalakrishna <dilip.g@ti.com>
Change-Id: I24ba8df63d9608bcd5fb92a725115a71d8585835
Signed-off-by: Dilip Gopalakrishna <dilip.g@ti.com>
sysbios-rpmsg tag: 1.20.09.23
This commit adds a sample dsp firmware image
built from the sysbios-rpmsg tree with tag
specified above.
Signed-off-by: Dilip Gopalakrishna <dilip.g@ti.com>
Change-Id: I24ba8df63d9608bcd5fb92a725115a71d8585835
Signed-off-by: Dilip Gopalakrishna <dilip.g@ti.com>
Merge jb-release into d-jb-release
wpan:wl18xx: BT/NFC firmware SP2.4
Upgraded to SP 2.4 for 189x/185x
nfc: Add new NCI script for NFC
BT WBS: Bluetooth HF data interface has been configured to I2S mode.
The new configuration configures BT chip for 16k sample rate,
stereo mode, BCLK-512k
FYSNC when CLK @falling edge
FSYNC polarity- Active Low
CH1 TX driven at: @falling edge
CH1 RX sampled at: @rising edge
CH2 TX driven at: @falling edge
CH2 RX sampled at: @rising edge
Change-Id: Id877babd545794910fdaf180c012a50dd2b45071
Signed-off-by: Shitiz Kumar <shitiz_kumar@ti.com>
Upgraded to SP 2.4 for 189x/185x
nfc: Add new NCI script for NFC
BT WBS: Bluetooth HF data interface has been configured to I2S mode.
The new configuration configures BT chip for 16k sample rate,
stereo mode, BCLK-512k
FYSNC when CLK @falling edge
FSYNC polarity- Active Low
CH1 TX driven at: @falling edge
CH1 RX sampled at: @rising edge
CH2 TX driven at: @falling edge
CH2 RX sampled at: @rising edge
Change-Id: Id877babd545794910fdaf180c012a50dd2b45071
Signed-off-by: Shitiz Kumar <shitiz_kumar@ti.com>
SGX BIN: 1.9@2139099 Set ro.product.processor before loading modules
Patches included in this binaries
ad6e72e SGX UM: Set ro.product.processor before loading modules
c59e125 SGX UM: Pvrsrvinit fix typo in remount command
b5a4dca SGX UM: Remove BRN32044 for omap5
b3f0cc6 SGX UM: Fix coefficients for RGB->NV12 blit
dcd7ea1 OMAP5: WA: Race condition when SGX is powered down
Signed-off-by: Eric Luong <x0119002@ti.c>
Change-Id: I996e57edeaa032cdcc28f56ee5a7f0d36984b528
Patches included in this binaries
ad6e72e SGX UM: Set ro.product.processor before loading modules
c59e125 SGX UM: Pvrsrvinit fix typo in remount command
b5a4dca SGX UM: Remove BRN32044 for omap5
b3f0cc6 SGX UM: Fix coefficients for RGB->NV12 blit
dcd7ea1 OMAP5: WA: Race condition when SGX is powered down
Signed-off-by: Eric Luong <x0119002@ti.c>
Change-Id: I996e57edeaa032cdcc28f56ee5a7f0d36984b528
wlan: wl18xx: update firmware file for post r8.a4.02 release
Upgrade wl18xx firmware file with more fixes on top of r8.a4.02
wl18xx-fw-mc.bin - FRev 8.4.0.0.9
Change-Id: I3cb8650af2b2e8a98c08719b6d6185be3e6b6be7
Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
Upgrade wl18xx firmware file with more fixes on top of r8.a4.02
wl18xx-fw-mc.bin - FRev 8.4.0.0.9
Change-Id: I3cb8650af2b2e8a98c08719b6d6185be3e6b6be7
Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
Merge jb-release into d-jb-release
wlan: Upgrading firmware to R5.SP3.01
Firmware for WL128X:
wl128x-fw-4-sr.bin Rev 7.3.10.0.125
wl128x-fw-4-mr.bin Rev 7.5.7.0.37
wl128x-fw-4-plt.bin PLT 7.3.10.0.125
Firmware for WL127X:
wl127x-fw-4-sr.bin Rev 6.3.10.0.125
wl127x-fw-4-mr.bin Rev 6.5.7.0.37
wl127x-fw-4-plt.bin PLT 6.3.10.0.125
Change-Id: I1d9f2ec6bfe2f4da71002f6d2f494393a98ac826
Signed-off-by: Panduranga Mallireddy <panduranga_mallireddy@ti.com>
Firmware for WL128X:
wl128x-fw-4-sr.bin Rev 7.3.10.0.125
wl128x-fw-4-mr.bin Rev 7.5.7.0.37
wl128x-fw-4-plt.bin PLT 7.3.10.0.125
Firmware for WL127X:
wl127x-fw-4-sr.bin Rev 6.3.10.0.125
wl127x-fw-4-mr.bin Rev 6.5.7.0.37
wl127x-fw-4-plt.bin PLT 6.3.10.0.125
Change-Id: I1d9f2ec6bfe2f4da71002f6d2f494393a98ac826
Signed-off-by: Panduranga Mallireddy <panduranga_mallireddy@ti.com>
Merge "wlan: wl18xx: update firmware file for r8.a4.02 release" into d-jb-release
wlan: wl18xx: update firmware file for r8.a4.02 release
Upgrade wl18xx firmware file for r8.a4.02.
wl18xx-fw.bin file is replaced by wl18xx-fw-mc.bin file
wl18xx-fw-mc.bin - FRev 8.4.0.0.8
Change-Id: I83c4fe28fa5b737c1540744ea1d187d40ee46718
Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
Upgrade wl18xx firmware file for r8.a4.02.
wl18xx-fw.bin file is replaced by wl18xx-fw-mc.bin file
wl18xx-fw-mc.bin - FRev 8.4.0.0.8
Change-Id: I83c4fe28fa5b737c1540744ea1d187d40ee46718
Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
wpan: add wilink8 (wl1857) firmware file
Add wl1857 bluetooth firmware file.
Signed-off-by: Oleg Matcovschi <oleg.matcovschi@ti.com>
Add wl1857 bluetooth firmware file.
Signed-off-by: Oleg Matcovschi <oleg.matcovschi@ti.com>
Merge "Updated Ducati binary for Blaze" into jb-release
Updated Ducati binary for Blaze
Updated Ducati binary to DUCATIMM-2.1.15
Change-Id: Ieba81a21f4a0c502ae9614653401bd7df2bb9fab
Signed-off-by: James W. Mills <jameswmills@ti.com>
Updated Ducati binary to DUCATIMM-2.1.15
Change-Id: Ieba81a21f4a0c502ae9614653401bd7df2bb9fab
Signed-off-by: James W. Mills <jameswmills@ti.com>
SGX-BIN: DDK binaries for OMAP5
Binaries based on release 1.9.RC2IMG2139099_TI.0001
Change-Id: I9cca2b882e3f700fc4e0b65db76648beea53d10f
Signed-off-by: Rodrigo Obregon <robregon@ti.com>
Binaries based on release 1.9.RC2IMG2139099_TI.0001
Change-Id: I9cca2b882e3f700fc4e0b65db76648beea53d10f
Signed-off-by: Rodrigo Obregon <robregon@ti.com>
Merge jb-release into d-jb-release
proprietary-open: Add proper FM firmware scripts for COM8 PG2.0
Change-Id: Ie6ee99f435e1ca5dc730e702276e993276cb8f89
Signed-off-by: Manjunatha Halli <x0130808@ti.com>
Change-Id: Ie6ee99f435e1ca5dc730e702276e993276cb8f89
Signed-off-by: Manjunatha Halli <x0130808@ti.com>
IMG DDK 1.9.RC2@2139099 for Android
IMG DDK Release 1.9.RC2@2139099 for Android.
Included in this release:
- User space and Kernel module binaries
- Kernel module source code
TI patches:
- 14f82bb SGX KM: ShrinkPagePool statistics changed to PVR_DBG_MESSAGE
- 0a641d3 SGX KM: Fix num_handle calculation for ion handles
- dbc5412 SGX-UM: Fix YV12 plane offset calculation
- 3f30c44 SGX UM: HACK: add extra read in SGXInitialise Script 1
- 95e5e61 SGX-UM: OGLES2: Twiddled NPOT rounding
- 4fabc62 BUILD: fix usage and help
- f24e4ee BUILD: Add install option "adb"
- 48917ad pvr-km: gc: Add page offset for ion allocated buffers
- 770c613 pvr-km: gc: Improve gc map/unmap logging
- 18ebcde gralloc: Map NV12 buffers with the GC MMU
- ec5dbf8 SGX-KM: Enable APM for OMAP5
- 7cca393 SGX-UM: Enable APM for OMAP5
- 0a6cc20 SGX-UM: Don't load omaplfb module when in-kernel driver is present
- 9b19be2 SGX-KM: Support in-kernel omaplfb
- 83797fd SGXKM: Multi-plane support for deviceclass i-face
- 12c0152 build: remove omaplfb from install step
- a3b7939 pvr-um: use arm-linux-androideabi- and fix JB debug build
- 3b8d413 PVR-UM: Make pvrsrvinit wrapper compatible with Jellybean
- 9a51dc6 Revert "SGXUM: Implements Gralloc late CPU mapping"
- 26fde09 SGX-UM: build - Remove target platform based configuration
- d8fe8bc OMAP5: BUILD: Remove unused variable
- a4bcb35 readme: Correct DDK version
- 15e3e57 SGX-UM: Add support for hardware specific powervr.ini files
- d94bbab PVR-UM: Add support to DDK for powervr.ini files
- 43f0767 SGX-UM: Added 16 bit depth EGL configs
- 2358502 SGX UM: Srvinit block until services ready
- 427b204 SGX UM: HAL block OpenPVRServices until services initialized
- c484977 SGX UM: Fix calculation of chroma plane in blit_internal
- c2f5df8 SGX KM: Dump dsscomp info during HW recovery
- 19a42d2 SGXKM: Adds support for 1D buffer allocation
- 168ce6b SGXKM: Do not perform explicit invalidate on mmap
- 51a40ae SGXUM: Implements Gralloc late CPU mapping
- f408e0e SGXUM: Gralloc allow for late or no GPU mapping
- 962d1bd SGXUM: Add allocation of images from system heap
- ca11707 SGXUM: Adds A8/U8/Y8 color format to WSEGL
- bb932d7 SGXKM: Increase XPROC_WORKAROUND to 500
- 9c9ee48 SGXKM: Fix cc-check.sh file permissions
- b5257f6 SGXKM: Make the DMM offset optional
- 77bae8e gralloc: add support for GRALLOC_USAGE_EXCLUSIVE_DISP
- 5d6ffd4 gralloc: publicly define omap specific usage flags
- 9005320 SGX-KM: Block DPLL cascading when SGX clock is enabled
- 4dc9a7f SGX-KM: Hold wake lock during hardware recovery
- 21427b9 SGX-KM: Add logging of thermal events
- 64c66f7 SGX-KM: Add cooling device interface
- a796f63 SGX-KM: Add asynchronous frequency limiting to DVFS
- 2f9849c SGX-KM: Add DVFS active modes
- d461646 SGX-UM: Add DVFS idle modes
- 205baff SGX-KM: Add DVFS idle modes
- 92d816c SGX-KM: Make APM configurable by module parameter
- d09e4ca SGX-KM: Adapt to device_scale interface change in K3.4
- 0522b99 SGXKM: Fix NULL handle warning when blitting GC320
- ef6bc2e SGXKM: Allow for late or no GPU mapping
- 402c29a SGXKM: Allow for SW access to a tiler buffer
- a92966c SGXUM: Adds YUV plane offsets for MM
- e2d3b88 SGXKM: SGX Tiler non-page-aligned support
- 8629462 SGXUM: Implements GPU Common Buffer Interface
- f1cb649 SGXUM: Multi-buffer manage bridge
- 9c740b1 SGXKM: Multi-buffer manage bridge
- f8ad906 SGXKM: Implements Heap Alloc Failure Report
- 16ca311 SGXUM: Add support for GPU unmap/remap
- 24d416c SGXKM: Add support for GPU unmap/remap
- 8db3ad5 SGX-KM: Use CONFIG_DRM_OMAP_DMM_TILER for kernel 3.4
- 67fac8b SGX-KM: Use pud_offset to get pmd_offset
- 7f22d73 PVR-KM: Prevent compilation of dc_omapfb3_linux
- 8ef6a11 SGX-KM: Remove hardcoding of values in egl.cfg
- 83404ff pvr-km: kfree phys info at unmap instead of map
- cf6a131 pvr-km: add a struct size to the physical descriptor
- 2796bcb gralloc: Set flag to enable GC MMU mapping in PVR services
- b423150 PVR-KM: Add function to obtain BV descriptor through 3PDC interface
- 618943a PVR-KM: Map buffers to GC core MMU on allocation time with Bltsville
- ae027ad SGXKM: Prevent mapping of export with zero ref
- 83a3751 OMAP4-SGX-UM: Allow for tiler buffer SW access
- bdd37c1 OMAP4-SGX-UM: Gralloc SW access and caching flags
- fc2b814 OMAP4-SGX-UM: Gralloc HAL_PIXEL_FORMAT_NV12 format
- 81d1397 SGX-KM: Make PVRSRVExportFDToIONHandles generic and register it with ion
- f9323d2 PVR-KM: OMAP5: Use shared device for Tiler 2D Mappings
- 23a0b0b PVR-KM: OMAP5: Hardcode core version value
- 6716f54 SGX-KM: OMAP5: HACK: Set the size of the SGX registers
- a5e6ced SGX-UM: add detection of OMAP5432 in pvrsrvinit
- 05ed03e SGX-UM: build: Add panda5 and omap5sevm to product list
- 9468360 SGX-KM: BUILD: Add OMAP5 support
- 35f7f51 SGX-UM: BUILD: Consolidate build into a single Makefile
- 5274190 SGX-KM: (build) Remove Android product and version dependency
- 1793900 Build: Don't install egl.cfg anymore
- 2f97d09 SGX-KM: egl.cfg sysfs entry
- 30a34b3 SGX-KM: Enable DPF, TRACE and ASSERT
- debc1e6 build-km: Enable blaze and blaze_tablet for ICS environment
- cadad99 build: Enable blaze and blaze_tablet for ICS environment
- c01ac9b SGX-KM: Add ability to build multiple sets of GFX kernel modules
- 7bab5dd build: Set correct load directory for kernel modules.
- 40133cb KM: add support for sgx544sc
- 8f93a09 SGX-UM: Add ability to build multiple sets of GFX binaries
- d0081b4 SGX-KM: Use platform data for OPP symbols.
- c7ae6ea SGX-UM: Enable building binaries for specific SGX
- cdeeccb readme: Add README
- 42bfb66 build: Add build_DDK.sh
- 5bc6953 Create gitignore file
- de46d4e IMG DDK 1.9RC2@2139099 for Android
Change-Id: Idf232c3d08e9d022fa721f25276dccae93a7a0dd
Signed-off-by: Eric Luong <x0119002@ti.c>
IMG DDK Release 1.9.RC2@2139099 for Android.
Included in this release:
- User space and Kernel module binaries
- Kernel module source code
TI patches:
- 14f82bb SGX KM: ShrinkPagePool statistics changed to PVR_DBG_MESSAGE
- 0a641d3 SGX KM: Fix num_handle calculation for ion handles
- dbc5412 SGX-UM: Fix YV12 plane offset calculation
- 3f30c44 SGX UM: HACK: add extra read in SGXInitialise Script 1
- 95e5e61 SGX-UM: OGLES2: Twiddled NPOT rounding
- 4fabc62 BUILD: fix usage and help
- f24e4ee BUILD: Add install option "adb"
- 48917ad pvr-km: gc: Add page offset for ion allocated buffers
- 770c613 pvr-km: gc: Improve gc map/unmap logging
- 18ebcde gralloc: Map NV12 buffers with the GC MMU
- ec5dbf8 SGX-KM: Enable APM for OMAP5
- 7cca393 SGX-UM: Enable APM for OMAP5
- 0a6cc20 SGX-UM: Don't load omaplfb module when in-kernel driver is present
- 9b19be2 SGX-KM: Support in-kernel omaplfb
- 83797fd SGXKM: Multi-plane support for deviceclass i-face
- 12c0152 build: remove omaplfb from install step
- a3b7939 pvr-um: use arm-linux-androideabi- and fix JB debug build
- 3b8d413 PVR-UM: Make pvrsrvinit wrapper compatible with Jellybean
- 9a51dc6 Revert "SGXUM: Implements Gralloc late CPU mapping"
- 26fde09 SGX-UM: build - Remove target platform based configuration
- d8fe8bc OMAP5: BUILD: Remove unused variable
- a4bcb35 readme: Correct DDK version
- 15e3e57 SGX-UM: Add support for hardware specific powervr.ini files
- d94bbab PVR-UM: Add support to DDK for powervr.ini files
- 43f0767 SGX-UM: Added 16 bit depth EGL configs
- 2358502 SGX UM: Srvinit block until services ready
- 427b204 SGX UM: HAL block OpenPVRServices until services initialized
- c484977 SGX UM: Fix calculation of chroma plane in blit_internal
- c2f5df8 SGX KM: Dump dsscomp info during HW recovery
- 19a42d2 SGXKM: Adds support for 1D buffer allocation
- 168ce6b SGXKM: Do not perform explicit invalidate on mmap
- 51a40ae SGXUM: Implements Gralloc late CPU mapping
- f408e0e SGXUM: Gralloc allow for late or no GPU mapping
- 962d1bd SGXUM: Add allocation of images from system heap
- ca11707 SGXUM: Adds A8/U8/Y8 color format to WSEGL
- bb932d7 SGXKM: Increase XPROC_WORKAROUND to 500
- 9c9ee48 SGXKM: Fix cc-check.sh file permissions
- b5257f6 SGXKM: Make the DMM offset optional
- 77bae8e gralloc: add support for GRALLOC_USAGE_EXCLUSIVE_DISP
- 5d6ffd4 gralloc: publicly define omap specific usage flags
- 9005320 SGX-KM: Block DPLL cascading when SGX clock is enabled
- 4dc9a7f SGX-KM: Hold wake lock during hardware recovery
- 21427b9 SGX-KM: Add logging of thermal events
- 64c66f7 SGX-KM: Add cooling device interface
- a796f63 SGX-KM: Add asynchronous frequency limiting to DVFS
- 2f9849c SGX-KM: Add DVFS active modes
- d461646 SGX-UM: Add DVFS idle modes
- 205baff SGX-KM: Add DVFS idle modes
- 92d816c SGX-KM: Make APM configurable by module parameter
- d09e4ca SGX-KM: Adapt to device_scale interface change in K3.4
- 0522b99 SGXKM: Fix NULL handle warning when blitting GC320
- ef6bc2e SGXKM: Allow for late or no GPU mapping
- 402c29a SGXKM: Allow for SW access to a tiler buffer
- a92966c SGXUM: Adds YUV plane offsets for MM
- e2d3b88 SGXKM: SGX Tiler non-page-aligned support
- 8629462 SGXUM: Implements GPU Common Buffer Interface
- f1cb649 SGXUM: Multi-buffer manage bridge
- 9c740b1 SGXKM: Multi-buffer manage bridge
- f8ad906 SGXKM: Implements Heap Alloc Failure Report
- 16ca311 SGXUM: Add support for GPU unmap/remap
- 24d416c SGXKM: Add support for GPU unmap/remap
- 8db3ad5 SGX-KM: Use CONFIG_DRM_OMAP_DMM_TILER for kernel 3.4
- 67fac8b SGX-KM: Use pud_offset to get pmd_offset
- 7f22d73 PVR-KM: Prevent compilation of dc_omapfb3_linux
- 8ef6a11 SGX-KM: Remove hardcoding of values in egl.cfg
- 83404ff pvr-km: kfree phys info at unmap instead of map
- cf6a131 pvr-km: add a struct size to the physical descriptor
- 2796bcb gralloc: Set flag to enable GC MMU mapping in PVR services
- b423150 PVR-KM: Add function to obtain BV descriptor through 3PDC interface
- 618943a PVR-KM: Map buffers to GC core MMU on allocation time with Bltsville
- ae027ad SGXKM: Prevent mapping of export with zero ref
- 83a3751 OMAP4-SGX-UM: Allow for tiler buffer SW access
- bdd37c1 OMAP4-SGX-UM: Gralloc SW access and caching flags
- fc2b814 OMAP4-SGX-UM: Gralloc HAL_PIXEL_FORMAT_NV12 format
- 81d1397 SGX-KM: Make PVRSRVExportFDToIONHandles generic and register it with ion
- f9323d2 PVR-KM: OMAP5: Use shared device for Tiler 2D Mappings
- 23a0b0b PVR-KM: OMAP5: Hardcode core version value
- 6716f54 SGX-KM: OMAP5: HACK: Set the size of the SGX registers
- a5e6ced SGX-UM: add detection of OMAP5432 in pvrsrvinit
- 05ed03e SGX-UM: build: Add panda5 and omap5sevm to product list
- 9468360 SGX-KM: BUILD: Add OMAP5 support
- 35f7f51 SGX-UM: BUILD: Consolidate build into a single Makefile
- 5274190 SGX-KM: (build) Remove Android product and version dependency
- 1793900 Build: Don't install egl.cfg anymore
- 2f97d09 SGX-KM: egl.cfg sysfs entry
- 30a34b3 SGX-KM: Enable DPF, TRACE and ASSERT
- debc1e6 build-km: Enable blaze and blaze_tablet for ICS environment
- cadad99 build: Enable blaze and blaze_tablet for ICS environment
- c01ac9b SGX-KM: Add ability to build multiple sets of GFX kernel modules
- 7bab5dd build: Set correct load directory for kernel modules.
- 40133cb KM: add support for sgx544sc
- 8f93a09 SGX-UM: Add ability to build multiple sets of GFX binaries
- d0081b4 SGX-KM: Use platform data for OPP symbols.
- c7ae6ea SGX-UM: Enable building binaries for specific SGX
- cdeeccb readme: Add README
- 42bfb66 build: Add build_DDK.sh
- 5bc6953 Create gitignore file
- de46d4e IMG DDK 1.9RC2@2139099 for Android
Change-Id: Idf232c3d08e9d022fa721f25276dccae93a7a0dd
Signed-off-by: Eric Luong <x0119002@ti.c>
proprietary-open: remove ti-wpan-fw installation
Since the device/ti/proprietary-open wpan.tgz firmware contains firmware for
connectivity chipsets on all omap4/omap5 based boards. The rule shall be moved
to a more generic hardware/ti/wpan/ti-wpan-products.mk
Change-Id: Ibb94ffb0e7fa29058b76069c4566ec17359c6005
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Since the device/ti/proprietary-open wpan.tgz firmware contains firmware for
connectivity chipsets on all omap4/omap5 based boards. The rule shall be moved
to a more generic hardware/ti/wpan/ti-wpan-products.mk
Change-Id: Ibb94ffb0e7fa29058b76069c4566ec17359c6005
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
wpan: add wilink8 (wl18xx) firmware files
wl18xx firmware files were removed due to licensing restrictions.
Now the licenses are approved, so placing them back.
Change-Id: Ib74710daa9703e0eb422e20e5c9b27dfad78d2ec
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
wl18xx firmware files were removed due to licensing restrictions.
Now the licenses are approved, so placing them back.
Change-Id: Ib74710daa9703e0eb422e20e5c9b27dfad78d2ec
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Merge jb-release into d-jb-release
wlan: add wilink8 (wl18xx) firmware files
wl18xx firmware files were removed due to licensing restrictions.
Now the licenses are approved, so placing them back.
Change-Id: I03195e1e7d88b11da2e3263156da9929a938af6a
Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
wl18xx firmware files were removed due to licensing restrictions.
Now the licenses are approved, so placing them back.
Change-Id: I03195e1e7d88b11da2e3263156da9929a938af6a
Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
SGX BIN: 1.9@2130229 CPCAM fix and new BV headers
-SGX KM: Fix num_handle calculation for ion handles
Build using the following patch in kernel
BV: Update headers to 2.2
Add bvbltparams.src2auxdstrect,
bvbltparams.maskauxdstrect,
BVFLAG_SRC2_AUXDSTRECT and BVFLAG_MASK_AUXDSTRECT;
Add BVAT_reserved2 bvauxtype;
Change-Id: I3cf6b8923eb55ac6c9fe4b1356b0436b7ea9601e
Signed-off-by: Eric Luong <x0119002@ti.c>
-SGX KM: Fix num_handle calculation for ion handles
Build using the following patch in kernel
BV: Update headers to 2.2
Add bvbltparams.src2auxdstrect,
bvbltparams.maskauxdstrect,
BVFLAG_SRC2_AUXDSTRECT and BVFLAG_MASK_AUXDSTRECT;
Add BVAT_reserved2 bvauxtype;
Change-Id: I3cf6b8923eb55ac6c9fe4b1356b0436b7ea9601e
Signed-off-by: Eric Luong <x0119002@ti.c>
Added wpan fw to all devices that source ti-vendor-omap4
Currently, that includes blaze, blaze_tablet, omap5sevm, panda, and
panda5.
Change-Id: If2a938eda04bd1dbb068674dc009439477a12296
Signed-off-by: James Mills <jameswmills@ti.com>
Currently, that includes blaze, blaze_tablet, omap5sevm, panda, and
panda5.
Change-Id: If2a938eda04bd1dbb068674dc009439477a12296
Signed-off-by: James Mills <jameswmills@ti.com>
Merge "proprietary-open: rule to install wpan fw" into jb-release
IMG DDK Release 1.9@2130229 for Android.
Included in this release:
- User space and kernel module binaries
- Kernel modules source code
IMG changes in this release:
- Compiler: Fixed offline compilation of vertex shaders
- Services/microkernel: Fixed BRN36513 workaround for single core SGX XT systems
- Compiler: Fixed UFOP_MOVCBIT comparison
- Microkernel: Improved FindTA checks for multiple-memory context systems
TI pathes:
- 63cc56e SGX-UM: Fix YV12 plane offset calculation
- 526e71b SGX UM: HACK: add extra read in SGXInitialise Script 1
- a1ef458 SGX-UM: OGLES2: Twiddled NPOT rounding
- b51d801 BUILD: fix usage and help
- 969f228 BUILD: Add install option "adb"
- acd9a23 pvr-km: gc: Add page offset for ion allocated buffers
- 37e14ae pvr-km: gc: Improve gc map/unmap logging
- 2a8ee79 gralloc: Map NV12 buffers with the GC MMU
- 03d02e4 SGX-KM: Enable APM for OMAP5
- 940cfee SGX-UM: Enable APM for OMAP5
- eef46d1 SGX-UM: Don't load omaplfb module when in-kernel driver is present
- d86fc7c SGX-KM: Support in-kernel omaplfb
- f14fa74 SGXKM: Multi-plane support for deviceclass i-face
- 1bbab6f build: remove omaplfb from install step
- 56b4ba3 pvr-um: use arm-linux-androideabi- and fix JB debug build
- be8e43c PVR-UM: Make pvrsrvinit wrapper compatible with Jellybean
- 2564afc Revert "SGXUM: Implements Gralloc late CPU mapping"
- 328e505 SGX-UM: build - Remove target platform based configuration
- 6fa8bf9 OMAP5: BUILD: Remove unused variable
- 774712f readme: Correct DDK version
- d9f62b6 SGX-UM: Add support for hardware specific powervr.ini files
- 542b265 PVR-UM: Add support to DDK for powervr.ini files
- e388e17 SGX-UM: Added 16 bit depth EGL configs
- b4eb77d SGX UM: Srvinit block until services ready
- b0ea039 SGX UM: HAL block OpenPVRServices until services initialized
- 6b914de SGX UM: Fix calculation of chroma plane in blit_internal
- a8a3f50 SGX KM: Dump dsscomp info during HW recovery
- 00aac37 SGXKM: Adds support for 1D buffer allocation
- 2c27f8e SGXKM: Do not perform explicit invalidate on mmap
- 2c3428f SGXUM: Implements Gralloc late CPU mapping
- a94e84a SGXUM: Gralloc allow for late or no GPU mapping
- a994ca8 SGXUM: Add allocation of images from system heap
- 6059267 SGXUM: Adds A8/U8/Y8 color format to WSEGL
- 5d3a379 SGXKM: Increase XPROC_WORKAROUND to 500
- 5087be0 SGXKM: Fix cc-check.sh file permissions
- ca0de0a SGXKM: Make the DMM offset optional
- 728735b gralloc: add support for GRALLOC_USAGE_EXCLUSIVE_DISP
- 94e04b9 gralloc: publicly define omap specific usage flags
- 042ea4b SGX-KM: Block DPLL cascading when SGX clock is enabled
- 165c85b SGX-KM: Hold wake lock during hardware recovery
- 929500b SGX-KM: Add logging of thermal events
- 660a0a1 SGX-KM: Add cooling device interface
- 9e38a0f SGX-KM: Add asynchronous frequency limiting to DVFS
- 62d655d SGX-KM: Add DVFS active modes
- 817a570 SGX-UM: Add DVFS idle modes
- 0929da9 SGX-KM: Add DVFS idle modes
- e08cfd1 SGX-KM: Make APM configurable by module parameter
- f143bf5 SGX-KM: Adapt to device_scale interface change in K3.4
- 63d6958 SGXKM: Fix NULL handle warning when blitting GC320
- 9fd3064 SGXKM: Allow for late or no GPU mapping
- dfe9ecc SGXKM: Allow for SW access to a tiler buffer
- 72cf1b6 SGXUM: Adds YUV plane offsets for MM
- 85c57b2 SGXKM: SGX Tiler non-page-aligned support
- a3baf57 SGXUM: Implements GPU Common Buffer Interface
- 6ab6df3 SGXUM: Multi-buffer manage bridge
- 1790c15 SGXKM: Multi-buffer manage bridge
- d634926 SGXKM: Implements Heap Alloc Failure Report
- 9c814f5 SGXUM: Add support for GPU unmap/remap
- 6f033e0 SGXKM: Add support for GPU unmap/remap
- 798ff60 SGX-KM: Use CONFIG_DRM_OMAP_DMM_TILER for kernel 3.4
- 4ebb646 SGX-KM: Use pud_offset to get pmd_offset
- 848c3db PVR-KM: Prevent compilation of dc_omapfb3_linux
- 7191727 SGX-KM: Remove hardcoding of values in egl.cfg
- 22a1807 pvr-km: kfree phys info at unmap instead of map
- c82dd99 pvr-km: add a struct size to the physical descriptor
- 9cdb86a gralloc: Set flag to enable GC MMU mapping in PVR services
- 1e3f5c1 PVR-KM: Add function to obtain BV descriptor through 3PDC interface
- b6201dc PVR-KM: Map buffers to GC core MMU on allocation time with Bltsville
- aebdf3c SGXKM: Prevent mapping of export with zero ref
- 14de558 OMAP4-SGX-UM: Allow for tiler buffer SW access
- 12a331c OMAP4-SGX-UM: Gralloc SW access and caching flags
- 242d4e1 OMAP4-SGX-UM: Gralloc HAL_PIXEL_FORMAT_NV12 format
- f11d2d8 SGX-KM: Make PVRSRVExportFDToIONHandles generic and register it with ion
- 97d8bd7 PVR-KM: OMAP5: Use shared device for Tiler 2D Mappings
- 440bf3a PVR-KM: OMAP5: Hardcode core version value
- 1a9f3bf SGX-KM: OMAP5: HACK: Set the size of the SGX registers
- 0dc79e2 SGX-UM: add detection of OMAP5432 in pvrsrvinit
- b214794 SGX-UM: build: Add panda5 and omap5sevm to product list
- 5f9d58b SGX-KM: BUILD: Add OMAP5 support
- b72daac SGX-UM: BUILD: Consolidate build into a single Makefile
- dc7a006 SGX-KM: (build) Remove Android product and version dependency
- dc8fe62 Build: Don't install egl.cfg anymore
- 8b319fc SGX-KM: egl.cfg sysfs entry
- ed1e300 SGX-KM: Enable DPF, TRACE and ASSERT
- 4c11992 build-km: Enable blaze and blaze_tablet for ICS environment
- 74bfc08 build: Enable blaze and blaze_tablet for ICS environment
- ae6f699 SGX-KM: Add ability to build multiple sets of GFX kernel modules
- e8f6a90 build: Set correct load directory for kernel modules.
- e134128 KM: add support for sgx544sc
- 23d2030 SGX-UM: Add ability to build multiple sets of GFX binaries
- 1155494 SGX-KM: Use platform data for OPP symbols.
- 603898e SGX-UM: Enable building binaries for specific SGX
- 80915d3 readme: Add README
- 976a182 build: Add build_DDK.sh
- ab64166 Create gitignore file
- 7978e98 IMG DDK 1.9@2130229 for Android
Change-Id: Ibf81bf50c0e893e7b9330cf304cdfe4045696a57
Signed-off-by: Eric Luong <x0119002@ti.com>
Included in this release:
- User space and kernel module binaries
- Kernel modules source code
IMG changes in this release:
- Compiler: Fixed offline compilation of vertex shaders
- Services/microkernel: Fixed BRN36513 workaround for single core SGX XT systems
- Compiler: Fixed UFOP_MOVCBIT comparison
- Microkernel: Improved FindTA checks for multiple-memory context systems
TI pathes:
- 63cc56e SGX-UM: Fix YV12 plane offset calculation
- 526e71b SGX UM: HACK: add extra read in SGXInitialise Script 1
- a1ef458 SGX-UM: OGLES2: Twiddled NPOT rounding
- b51d801 BUILD: fix usage and help
- 969f228 BUILD: Add install option "adb"
- acd9a23 pvr-km: gc: Add page offset for ion allocated buffers
- 37e14ae pvr-km: gc: Improve gc map/unmap logging
- 2a8ee79 gralloc: Map NV12 buffers with the GC MMU
- 03d02e4 SGX-KM: Enable APM for OMAP5
- 940cfee SGX-UM: Enable APM for OMAP5
- eef46d1 SGX-UM: Don't load omaplfb module when in-kernel driver is present
- d86fc7c SGX-KM: Support in-kernel omaplfb
- f14fa74 SGXKM: Multi-plane support for deviceclass i-face
- 1bbab6f build: remove omaplfb from install step
- 56b4ba3 pvr-um: use arm-linux-androideabi- and fix JB debug build
- be8e43c PVR-UM: Make pvrsrvinit wrapper compatible with Jellybean
- 2564afc Revert "SGXUM: Implements Gralloc late CPU mapping"
- 328e505 SGX-UM: build - Remove target platform based configuration
- 6fa8bf9 OMAP5: BUILD: Remove unused variable
- 774712f readme: Correct DDK version
- d9f62b6 SGX-UM: Add support for hardware specific powervr.ini files
- 542b265 PVR-UM: Add support to DDK for powervr.ini files
- e388e17 SGX-UM: Added 16 bit depth EGL configs
- b4eb77d SGX UM: Srvinit block until services ready
- b0ea039 SGX UM: HAL block OpenPVRServices until services initialized
- 6b914de SGX UM: Fix calculation of chroma plane in blit_internal
- a8a3f50 SGX KM: Dump dsscomp info during HW recovery
- 00aac37 SGXKM: Adds support for 1D buffer allocation
- 2c27f8e SGXKM: Do not perform explicit invalidate on mmap
- 2c3428f SGXUM: Implements Gralloc late CPU mapping
- a94e84a SGXUM: Gralloc allow for late or no GPU mapping
- a994ca8 SGXUM: Add allocation of images from system heap
- 6059267 SGXUM: Adds A8/U8/Y8 color format to WSEGL
- 5d3a379 SGXKM: Increase XPROC_WORKAROUND to 500
- 5087be0 SGXKM: Fix cc-check.sh file permissions
- ca0de0a SGXKM: Make the DMM offset optional
- 728735b gralloc: add support for GRALLOC_USAGE_EXCLUSIVE_DISP
- 94e04b9 gralloc: publicly define omap specific usage flags
- 042ea4b SGX-KM: Block DPLL cascading when SGX clock is enabled
- 165c85b SGX-KM: Hold wake lock during hardware recovery
- 929500b SGX-KM: Add logging of thermal events
- 660a0a1 SGX-KM: Add cooling device interface
- 9e38a0f SGX-KM: Add asynchronous frequency limiting to DVFS
- 62d655d SGX-KM: Add DVFS active modes
- 817a570 SGX-UM: Add DVFS idle modes
- 0929da9 SGX-KM: Add DVFS idle modes
- e08cfd1 SGX-KM: Make APM configurable by module parameter
- f143bf5 SGX-KM: Adapt to device_scale interface change in K3.4
- 63d6958 SGXKM: Fix NULL handle warning when blitting GC320
- 9fd3064 SGXKM: Allow for late or no GPU mapping
- dfe9ecc SGXKM: Allow for SW access to a tiler buffer
- 72cf1b6 SGXUM: Adds YUV plane offsets for MM
- 85c57b2 SGXKM: SGX Tiler non-page-aligned support
- a3baf57 SGXUM: Implements GPU Common Buffer Interface
- 6ab6df3 SGXUM: Multi-buffer manage bridge
- 1790c15 SGXKM: Multi-buffer manage bridge
- d634926 SGXKM: Implements Heap Alloc Failure Report
- 9c814f5 SGXUM: Add support for GPU unmap/remap
- 6f033e0 SGXKM: Add support for GPU unmap/remap
- 798ff60 SGX-KM: Use CONFIG_DRM_OMAP_DMM_TILER for kernel 3.4
- 4ebb646 SGX-KM: Use pud_offset to get pmd_offset
- 848c3db PVR-KM: Prevent compilation of dc_omapfb3_linux
- 7191727 SGX-KM: Remove hardcoding of values in egl.cfg
- 22a1807 pvr-km: kfree phys info at unmap instead of map
- c82dd99 pvr-km: add a struct size to the physical descriptor
- 9cdb86a gralloc: Set flag to enable GC MMU mapping in PVR services
- 1e3f5c1 PVR-KM: Add function to obtain BV descriptor through 3PDC interface
- b6201dc PVR-KM: Map buffers to GC core MMU on allocation time with Bltsville
- aebdf3c SGXKM: Prevent mapping of export with zero ref
- 14de558 OMAP4-SGX-UM: Allow for tiler buffer SW access
- 12a331c OMAP4-SGX-UM: Gralloc SW access and caching flags
- 242d4e1 OMAP4-SGX-UM: Gralloc HAL_PIXEL_FORMAT_NV12 format
- f11d2d8 SGX-KM: Make PVRSRVExportFDToIONHandles generic and register it with ion
- 97d8bd7 PVR-KM: OMAP5: Use shared device for Tiler 2D Mappings
- 440bf3a PVR-KM: OMAP5: Hardcode core version value
- 1a9f3bf SGX-KM: OMAP5: HACK: Set the size of the SGX registers
- 0dc79e2 SGX-UM: add detection of OMAP5432 in pvrsrvinit
- b214794 SGX-UM: build: Add panda5 and omap5sevm to product list
- 5f9d58b SGX-KM: BUILD: Add OMAP5 support
- b72daac SGX-UM: BUILD: Consolidate build into a single Makefile
- dc7a006 SGX-KM: (build) Remove Android product and version dependency
- dc8fe62 Build: Don't install egl.cfg anymore
- 8b319fc SGX-KM: egl.cfg sysfs entry
- ed1e300 SGX-KM: Enable DPF, TRACE and ASSERT
- 4c11992 build-km: Enable blaze and blaze_tablet for ICS environment
- 74bfc08 build: Enable blaze and blaze_tablet for ICS environment
- ae6f699 SGX-KM: Add ability to build multiple sets of GFX kernel modules
- e8f6a90 build: Set correct load directory for kernel modules.
- e134128 KM: add support for sgx544sc
- 23d2030 SGX-UM: Add ability to build multiple sets of GFX binaries
- 1155494 SGX-KM: Use platform data for OPP symbols.
- 603898e SGX-UM: Enable building binaries for specific SGX
- 80915d3 readme: Add README
- 976a182 build: Add build_DDK.sh
- ab64166 Create gitignore file
- 7978e98 IMG DDK 1.9@2130229 for Android
Change-Id: Ibf81bf50c0e893e7b9330cf304cdfe4045696a57
Signed-off-by: Eric Luong <x0119002@ti.com>
SGX-BIN: jb built bins (1.9@2120756)
IMG DDK Release 1.9@2120756 for Android.
Included in this release:
- User space and Kernel module binaries
- Kernel module source code
IMG changes in this release:
- Services: Improved code-style consistency in function pointer arguments
- OGLES: Added thread lock around setting of bDirtySinceLastTAKick
- OGLES2/EGL: Fixed flickering due to unsynchronised SGX usage for vertex texturing
- OGLES2/DMS: Improved triangle split to favour simpler shaders
- OGLES2: Fixed test failure with more than 32 vertex shader outputs
- Android: Enabled PVR_LINUX_MEM_AREA_POOL
- Compiler: Added backports of performance-related improvements
- OGLES2: Fixed typo in pre-processor define
- Microkernel: Added some additional MKTRACE output to aid debug
TI patches:
- 18545f4 SGX UM: HACK: add extra read in SGXInitialise Script 1
- 3f66f33 SGX-UM: OGLES2: Twiddled NPOT rounding
- d414023 BUILD: fix usage and help
- 4a5d7c8 BUILD: Add install option "adb"
- ccad4b9 pvr-km: gc: Add page offset for ion allocated buffers
- b25efb8 pvr-km: gc: Improve gc map/unmap logging
- 64df790 gralloc: Map NV12 buffers with the GC MMU
- 41efdcb SGX-KM: Enable APM for OMAP5
- eaef331 SGX-UM: Enable APM for OMAP5
- bfe92db SGX-UM: Don't load omaplfb module when in-kernel driver is present
- 9172d39 SGX-KM: Support in-kernel omaplfb
- 742c26d SGXKM: Multi-plane support for deviceclass i-face
- 811bd0b build: remove omaplfb from install step
- e211e81 pvr-um: use arm-linux-androideabi- and fix JB debug build
- a92d4e6 PVR-UM: Make pvrsrvinit wrapper compatible with Jellybean
- 1f40f26 Revert "SGXUM: Implements Gralloc late CPU mapping"
- c27d071 SGX-UM: build - Remove target platform based configuration
- f2ae6d6 OMAP5: BUILD: Remove unused variable
- 3e9dbd7 readme: Correct DDK version
- 7d1cddb SGX-UM: Add support for hardware specific powervr.ini files
- 28b77a6 PVR-UM: Add support to DDK for powervr.ini files
- 95a84d5 SGX-UM: Added 16 bit depth EGL configs
- cb441ae SGX UM: Srvinit block until services ready
- 9c6bb2e SGX UM: HAL block OpenPVRServices until services initialized
- 3b472d5 SGX UM: Fix calculation of chroma plane in blit_internal
- 5efbe22 SGX KM: Dump dsscomp info during HW recovery
- d14fe4e SGXKM: Adds support for 1D buffer allocation
- 751bf6c SGXKM: Do not perform explicit invalidate on mmap
- 9eb3305 SGXUM: Implements Gralloc late CPU mapping
- 9850dc9 SGXUM: Gralloc allow for late or no GPU mapping
- 14a1340 SGXUM: Add allocation of images from system heap
- 019f55a SGXUM: Adds A8/U8/Y8 color format to WSEGL
- e2adf94 SGXKM: Increase XPROC_WORKAROUND to 500
- 1115ab6 SGXKM: Fix cc-check.sh file permissions
- 6d12860 SGXKM: Make the DMM offset optional
- 103cb55 gralloc: add support for GRALLOC_USAGE_EXCLUSIVE_DISP
- 30fac68 gralloc: publicly define omap specific usage flags
- c06fb88 gralloc: remove unused entry from public framebuffer interface
- 5997916 SGX-KM: Block DPLL cascading when SGX clock is enabled
- 42fa990 SGX-KM: Hold wake lock during hardware recovery
- 2abf125 SGX-KM: Add logging of thermal events
- d28152d SGX-KM: Add cooling device interface
- 26624e9 SGX-KM: Add asynchronous frequency limiting to DVFS
- 58c447d SGX-KM: Add DVFS active modes
- accad20 SGX-UM: Add DVFS idle modes
- 62c7a32 SGX-KM: Add DVFS idle modes
- 294d2af SGX-KM: Make APM configurable by module parameter
- 0c335cb SGX-KM: Adapt to device_scale interface change in K3.4
- 998aba4 SGXKM: Fix NULL handle warning when blitting GC320
- 5768343 SGXKM: Allow for late or no GPU mapping
- 61609e9 SGXKM: Allow for SW access to a tiler buffer
- dd3c012 SGXUM: Adds YUV plane offsets for MM
- f36a3da SGXKM: SGX Tiler non-page-aligned support
- 44c2da3 SGXUM: Implements GPU Common Buffer Interface
- b047c83 SGXUM: Multi-buffer manage bridge
- cfdd961 SGXKM: Multi-buffer manage bridge
- 2bb94b0 SGXKM: Implements Heap Alloc Failure Report
- 5a45782 SGXUM: Add support for GPU unmap/remap
- ebc2bd0 SGXKM: Add support for GPU unmap/remap
- 4a5fd83 SGX-KM: Use CONFIG_DRM_OMAP_DMM_TILER for kernel 3.4
- 4901b49 SGX-KM: Use pud_offset to get pmd_offset
- 5f89966 PVR-KM: Prevent compilation of dc_omapfb3_linux
- efd39d6 SGX-KM: Remove hardcoding of values in egl.cfg
- 3c8fc10 pvr-km: kfree phys info at unmap instead of map
- 29d47a7 pvr-km: add a struct size to the physical descriptor
- dcaf4f9 gralloc: Set flag to enable GC MMU mapping in PVR services
- ad18c89 PVR-KM: Add function to obtain BV descriptor through 3PDC interface
- 1bf9204 PVR-KM: Map buffers to GC core MMU on allocation time with Bltsville
- 6963019 SGXKM: Prevent mapping of export with zero ref
- cd992b5 OMAP4-SGX-UM: Allow for tiler buffer SW access
- 89dcbcf OMAP4-SGX-UM: Gralloc SW access and caching flags
- 90e24fa OMAP4-SGX-UM: Gralloc HAL_PIXEL_FORMAT_NV12 format
- 6b7bdb0 SGX-KM: Make PVRSRVExportFDToIONHandles generic and register it with ion
- 1b80633 PVR-KM: OMAP5: Use shared device for Tiler 2D Mappings
- 37cf29e PVR-KM: OMAP5: Hardcode core version value
- e2ba8bc SGX-KM: OMAP5: HACK: Set the size of the SGX registers
- 2daff47 SGX-UM: add detection of OMAP5432 in pvrsrvinit
- 090bd59 SGX-UM: build: Add panda5 and omap5sevm to product list
- 97faede SGX-KM: BUILD: Add OMAP5 support
- 436c1c0 SGX-UM: BUILD: Consolidate build into a single Makefile
- 374727e SGX-KM: (build) Remove Android product and version dependency
- 1d800ed Build: Don't install egl.cfg anymore
- 2112d08 SGX-KM: egl.cfg sysfs entry
- f94a224 SGX-KM: Enable DPF, TRACE and ASSERT
- 8784fd5 build-km: Enable blaze and blaze_tablet for ICS environment
- 6343236 build: Enable blaze and blaze_tablet for ICS environment
- e6d71d1 SGX-KM: Add ability to build multiple sets of GFX kernel modules
- a416ebd build: Set correct load directory for kernel modules.
- 9e396ec KM: add support for sgx544sc
- 0e0a3e7 SGX-UM: Add ability to build multiple sets of GFX binaries
- b5360e4 gralloc: Add field for bin. compat. with HWC hal_public.h
- 0734cf1 SGX-KM: Use platform data for OPP symbols.
- 1918ea8 SGX-UM: Enable building binaries for specific SGX
- b7084d9 readme: Add README
- e4ea2fb build: Add build_DDK.sh
- 355a54d Create gitignore file
Signed-off-by: Eric Luong <x0119002@ti.com>
Change-Id: I3067705eb2bf3f6a98628b697319d933c62fc6a3
IMG DDK Release 1.9@2120756 for Android.
Included in this release:
- User space and Kernel module binaries
- Kernel module source code
IMG changes in this release:
- Services: Improved code-style consistency in function pointer arguments
- OGLES: Added thread lock around setting of bDirtySinceLastTAKick
- OGLES2/EGL: Fixed flickering due to unsynchronised SGX usage for vertex texturing
- OGLES2/DMS: Improved triangle split to favour simpler shaders
- OGLES2: Fixed test failure with more than 32 vertex shader outputs
- Android: Enabled PVR_LINUX_MEM_AREA_POOL
- Compiler: Added backports of performance-related improvements
- OGLES2: Fixed typo in pre-processor define
- Microkernel: Added some additional MKTRACE output to aid debug
TI patches:
- 18545f4 SGX UM: HACK: add extra read in SGXInitialise Script 1
- 3f66f33 SGX-UM: OGLES2: Twiddled NPOT rounding
- d414023 BUILD: fix usage and help
- 4a5d7c8 BUILD: Add install option "adb"
- ccad4b9 pvr-km: gc: Add page offset for ion allocated buffers
- b25efb8 pvr-km: gc: Improve gc map/unmap logging
- 64df790 gralloc: Map NV12 buffers with the GC MMU
- 41efdcb SGX-KM: Enable APM for OMAP5
- eaef331 SGX-UM: Enable APM for OMAP5
- bfe92db SGX-UM: Don't load omaplfb module when in-kernel driver is present
- 9172d39 SGX-KM: Support in-kernel omaplfb
- 742c26d SGXKM: Multi-plane support for deviceclass i-face
- 811bd0b build: remove omaplfb from install step
- e211e81 pvr-um: use arm-linux-androideabi- and fix JB debug build
- a92d4e6 PVR-UM: Make pvrsrvinit wrapper compatible with Jellybean
- 1f40f26 Revert "SGXUM: Implements Gralloc late CPU mapping"
- c27d071 SGX-UM: build - Remove target platform based configuration
- f2ae6d6 OMAP5: BUILD: Remove unused variable
- 3e9dbd7 readme: Correct DDK version
- 7d1cddb SGX-UM: Add support for hardware specific powervr.ini files
- 28b77a6 PVR-UM: Add support to DDK for powervr.ini files
- 95a84d5 SGX-UM: Added 16 bit depth EGL configs
- cb441ae SGX UM: Srvinit block until services ready
- 9c6bb2e SGX UM: HAL block OpenPVRServices until services initialized
- 3b472d5 SGX UM: Fix calculation of chroma plane in blit_internal
- 5efbe22 SGX KM: Dump dsscomp info during HW recovery
- d14fe4e SGXKM: Adds support for 1D buffer allocation
- 751bf6c SGXKM: Do not perform explicit invalidate on mmap
- 9eb3305 SGXUM: Implements Gralloc late CPU mapping
- 9850dc9 SGXUM: Gralloc allow for late or no GPU mapping
- 14a1340 SGXUM: Add allocation of images from system heap
- 019f55a SGXUM: Adds A8/U8/Y8 color format to WSEGL
- e2adf94 SGXKM: Increase XPROC_WORKAROUND to 500
- 1115ab6 SGXKM: Fix cc-check.sh file permissions
- 6d12860 SGXKM: Make the DMM offset optional
- 103cb55 gralloc: add support for GRALLOC_USAGE_EXCLUSIVE_DISP
- 30fac68 gralloc: publicly define omap specific usage flags
- c06fb88 gralloc: remove unused entry from public framebuffer interface
- 5997916 SGX-KM: Block DPLL cascading when SGX clock is enabled
- 42fa990 SGX-KM: Hold wake lock during hardware recovery
- 2abf125 SGX-KM: Add logging of thermal events
- d28152d SGX-KM: Add cooling device interface
- 26624e9 SGX-KM: Add asynchronous frequency limiting to DVFS
- 58c447d SGX-KM: Add DVFS active modes
- accad20 SGX-UM: Add DVFS idle modes
- 62c7a32 SGX-KM: Add DVFS idle modes
- 294d2af SGX-KM: Make APM configurable by module parameter
- 0c335cb SGX-KM: Adapt to device_scale interface change in K3.4
- 998aba4 SGXKM: Fix NULL handle warning when blitting GC320
- 5768343 SGXKM: Allow for late or no GPU mapping
- 61609e9 SGXKM: Allow for SW access to a tiler buffer
- dd3c012 SGXUM: Adds YUV plane offsets for MM
- f36a3da SGXKM: SGX Tiler non-page-aligned support
- 44c2da3 SGXUM: Implements GPU Common Buffer Interface
- b047c83 SGXUM: Multi-buffer manage bridge
- cfdd961 SGXKM: Multi-buffer manage bridge
- 2bb94b0 SGXKM: Implements Heap Alloc Failure Report
- 5a45782 SGXUM: Add support for GPU unmap/remap
- ebc2bd0 SGXKM: Add support for GPU unmap/remap
- 4a5fd83 SGX-KM: Use CONFIG_DRM_OMAP_DMM_TILER for kernel 3.4
- 4901b49 SGX-KM: Use pud_offset to get pmd_offset
- 5f89966 PVR-KM: Prevent compilation of dc_omapfb3_linux
- efd39d6 SGX-KM: Remove hardcoding of values in egl.cfg
- 3c8fc10 pvr-km: kfree phys info at unmap instead of map
- 29d47a7 pvr-km: add a struct size to the physical descriptor
- dcaf4f9 gralloc: Set flag to enable GC MMU mapping in PVR services
- ad18c89 PVR-KM: Add function to obtain BV descriptor through 3PDC interface
- 1bf9204 PVR-KM: Map buffers to GC core MMU on allocation time with Bltsville
- 6963019 SGXKM: Prevent mapping of export with zero ref
- cd992b5 OMAP4-SGX-UM: Allow for tiler buffer SW access
- 89dcbcf OMAP4-SGX-UM: Gralloc SW access and caching flags
- 90e24fa OMAP4-SGX-UM: Gralloc HAL_PIXEL_FORMAT_NV12 format
- 6b7bdb0 SGX-KM: Make PVRSRVExportFDToIONHandles generic and register it with ion
- 1b80633 PVR-KM: OMAP5: Use shared device for Tiler 2D Mappings
- 37cf29e PVR-KM: OMAP5: Hardcode core version value
- e2ba8bc SGX-KM: OMAP5: HACK: Set the size of the SGX registers
- 2daff47 SGX-UM: add detection of OMAP5432 in pvrsrvinit
- 090bd59 SGX-UM: build: Add panda5 and omap5sevm to product list
- 97faede SGX-KM: BUILD: Add OMAP5 support
- 436c1c0 SGX-UM: BUILD: Consolidate build into a single Makefile
- 374727e SGX-KM: (build) Remove Android product and version dependency
- 1d800ed Build: Don't install egl.cfg anymore
- 2112d08 SGX-KM: egl.cfg sysfs entry
- f94a224 SGX-KM: Enable DPF, TRACE and ASSERT
- 8784fd5 build-km: Enable blaze and blaze_tablet for ICS environment
- 6343236 build: Enable blaze and blaze_tablet for ICS environment
- e6d71d1 SGX-KM: Add ability to build multiple sets of GFX kernel modules
- a416ebd build: Set correct load directory for kernel modules.
- 9e396ec KM: add support for sgx544sc
- 0e0a3e7 SGX-UM: Add ability to build multiple sets of GFX binaries
- b5360e4 gralloc: Add field for bin. compat. with HWC hal_public.h
- 0734cf1 SGX-KM: Use platform data for OPP symbols.
- 1918ea8 SGX-UM: Enable building binaries for specific SGX
- b7084d9 readme: Add README
- e4ea2fb build: Add build_DDK.sh
- 355a54d Create gitignore file
Signed-off-by: Eric Luong <x0119002@ti.com>
Change-Id: I3067705eb2bf3f6a98628b697319d933c62fc6a3
proprietary-open: rule to install wpan fw
Use this rule to install all wpan related firmware files.
The wpan archive needs to maintain the folder structure of
wl12xx/wpan/<technology>/.bts
Patch modified from original - Mark Lifshits <lifshitsm@ti.com>
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Modified to install only in the intermediates directory, and not to
remove artifacts from the intermediates directory.
Change-Id: I26a0669eea1a7b7b26ad6a2a780ad0d098f477d0
Signed-off-by: James W. Mills <jameswmills@ti.com>
Use this rule to install all wpan related firmware files.
The wpan archive needs to maintain the folder structure of
wl12xx/wpan/<technology>/.bts
Patch modified from original - Mark Lifshits <lifshitsm@ti.com>
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Modified to install only in the intermediates directory, and not to
remove artifacts from the intermediates directory.
Change-Id: I26a0669eea1a7b7b26ad6a2a780ad0d098f477d0
Signed-off-by: James W. Mills <jameswmills@ti.com>
wlan: Upgrading firmware to R5.SP2.04
Firmware for WL128X:
wl128x-fw-4-sr.bin FRev 7.3.9.0.120
wl128x-fw-4-plt.bin FPLT 7.3.9.0.120
wl128x-fw-4-mr.bin FRev 7.5.7.0.32
Firmware for WL127X:
wl127x-fw-4-sr.bin FRev 6.3.9.0.120
wl127x-fw-4-plt.bin FPLT 6.3.9.0.120
wl127x-fw-4-mr.bin FRev 6.5.7.0.32
Change-Id: Ia79f74bb7b845d510d8e0b94e56d9d3d6a389ed9
Signed-off-by: Panduranga Mallireddy <panduranga_mallireddy@ti.com>
Firmware for WL128X:
wl128x-fw-4-sr.bin FRev 7.3.9.0.120
wl128x-fw-4-plt.bin FPLT 7.3.9.0.120
wl128x-fw-4-mr.bin FRev 7.5.7.0.32
Firmware for WL127X:
wl127x-fw-4-sr.bin FRev 6.3.9.0.120
wl127x-fw-4-plt.bin FPLT 6.3.9.0.120
wl127x-fw-4-mr.bin FRev 6.5.7.0.32
Change-Id: Ia79f74bb7b845d510d8e0b94e56d9d3d6a389ed9
Signed-off-by: Panduranga Mallireddy <panduranga_mallireddy@ti.com>
Merge "wpan: BT HF configuration for I2S mode" into jb-release
SGX-BIN: jb built bins (1.9@956766)
DDK1.9 is the officially supported SGX release for JB
This package depends on the p-android-omap-3.0-dev kernel with:
b49820d omaplfb: Add omaplfb to the kernel tree
48501089 blaze_defconfig: Add KPROBES and RELAY dynamic instrumentation
1558094 blaze_defconfig: Enable SCHED_TRACER
Change-Id: I40b3dd8e561fa7fa1c676a181274fdbf169fcca3
Signed-off-by: Tony Lofthouse <a0741364@ti.com>
DDK1.9 is the officially supported SGX release for JB
This package depends on the p-android-omap-3.0-dev kernel with:
b49820d omaplfb: Add omaplfb to the kernel tree
48501089 blaze_defconfig: Add KPROBES and RELAY dynamic instrumentation
1558094 blaze_defconfig: Enable SCHED_TRACER
Change-Id: I40b3dd8e561fa7fa1c676a181274fdbf169fcca3
Signed-off-by: Tony Lofthouse <a0741364@ti.com>
SGX prebuilt binaries: Untar to and copy from intermediate directories.
This will untar SGX prebuilt binaries to an intermediate directory and
install them in the Android filesystem without polluting the git tree
with untracked files.
Change-Id: I806a9aa4a939b6109399df999603706e3c34f17e
This will untar SGX prebuilt binaries to an intermediate directory and
install them in the Android filesystem without polluting the git tree
with untracked files.
Change-Id: I806a9aa4a939b6109399df999603706e3c34f17e
proprietary-open: wlan: move to tgz tarball
Move WLAN firmware from indvidual files to tar ball approach.
Based on the way ducati binaries are handled.
Change-Id: I66bfec1b0fb01f36a4508922d0e4919d6bb1eeb0
Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
Move WLAN firmware from indvidual files to tar ball approach.
Based on the way ducati binaries are handled.
Change-Id: I66bfec1b0fb01f36a4508922d0e4919d6bb1eeb0
Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
wpan: BT HF configuration for I2S mode
Bluetooth HF data interface has been configured to I2S mode
from PCM mode.
The new configuration configures BT chip for 8k sample rate,
stereo mode, BCLK-256k
FYSNC when CLK @falling edge
FSYNC polarity- Active Low
CH1 TX driven at: @falling edge
CH1 RX sampled at: @rising edge
CH2 TX driven at: @falling edge
CH2 RX sampled at: @rising edge
Change-Id: I31dcb2a5d717d553230ddd07f909c82dd349201f
Signed-off-by: Shitiz Kumar <shitiz_kumar@ti.com>
Signed-off-by: Manjunatha Halli <x0130808@ti.com>
Bluetooth HF data interface has been configured to I2S mode
from PCM mode.
The new configuration configures BT chip for 8k sample rate,
stereo mode, BCLK-256k
FYSNC when CLK @falling edge
FSYNC polarity- Active Low
CH1 TX driven at: @falling edge
CH1 RX sampled at: @rising edge
CH2 TX driven at: @falling edge
CH2 RX sampled at: @rising edge
Change-Id: I31dcb2a5d717d553230ddd07f909c82dd349201f
Signed-off-by: Shitiz Kumar <shitiz_kumar@ti.com>
Signed-off-by: Manjunatha Halli <x0130808@ti.com>
Merge "SGX-BIN: jb built bins (1.8@945322) + patches #1" into jb-release
SGX-BIN: jb built bins (1.8@945322) + patches #1
937f180 omaplfb: Allocate a clear buffer with 8 pixel stride per GC requ
6bfc77e omaplfb: Remove batching all blits per frame
1ab6738 SGX UM: Srvinit block until services ready
Change-Id: I8ffe3d362d2f593255f743a723cf88f4987841d4
Signed-off-by: Tony Lofthouse <a0741364@ti.com>
937f180 omaplfb: Allocate a clear buffer with 8 pixel stride per GC requ
6bfc77e omaplfb: Remove batching all blits per frame
1ab6738 SGX UM: Srvinit block until services ready
Change-Id: I8ffe3d362d2f593255f743a723cf88f4987841d4
Signed-off-by: Tony Lofthouse <a0741364@ti.com>
Updated Ducati binary for blaze_tablet to version 2.1.10
Change-Id: Id5bb8fd214ba98d1f92f2d2222dc8c41739f9ef1
Signed-off-by: Daniel Levin <dendy@ti.com>
Change-Id: Id5bb8fd214ba98d1f92f2d2222dc8c41739f9ef1
Signed-off-by: Daniel Levin <dendy@ti.com>
SGX-BIN: jb built bins (1.8@945322)
7d95406 pvr-km: Do not strip debug symbols from kernel module
582d243 SGXKM: Incresed XPROC_WORKAROUND to 500
1a96424 SGX UM: HAL block OpenPVRServices until services initialized
ccf4286 SGXUM: Add allocation of images from system heap
6a61ac6 SGXKM: Adds support for 1D buffer allocation
a7bb574 SGXKM: Make the DMM offset optional
e579ec6 Merge branch 'img_ddk_1.8' into ti_ics_1.8 (DDK 1.8@945322)
befcaa3 Revert "SGXUM: Add allocation of images from system heap"
2a6a57a Revert "SGXKM: Add allocation from ION system heap"
d3f79fb Revert "SGX UM: Bridge lock rework"
db5672c Revert "SGX KM: Bridge lock rework"
5cfc1aa gralloc: add support for GRALLOC_USAGE_EXCLUSIVE_DISP
88b43ea gralloc: publicly define omap specific usage flags
8b9555d gralloc: remove unused entry from public framebuffer interface
ef2bc78 Merge "PVR-UM/KM: Support Jellybean build" into ti_ics_1.8
8247309 Merge "PVR-UM: Make pvrsrvinit wrapper compatible with Jellybean
0d7410c PVR-UM/KM: Support Jellybean build
f269b1f PVR-UM: Make pvrsrvinit wrapper compatible with Jellybean
Change-Id: Ic6a09d5f6f3a266c83da12b472d367042ac47c38
Signed-off-by: Tony Lofthouse <a0741364@ti.com>
Change-Id: Ic67c6466162669bd4c517faa56b897d2b71ff323
7d95406 pvr-km: Do not strip debug symbols from kernel module
582d243 SGXKM: Incresed XPROC_WORKAROUND to 500
1a96424 SGX UM: HAL block OpenPVRServices until services initialized
ccf4286 SGXUM: Add allocation of images from system heap
6a61ac6 SGXKM: Adds support for 1D buffer allocation
a7bb574 SGXKM: Make the DMM offset optional
e579ec6 Merge branch 'img_ddk_1.8' into ti_ics_1.8 (DDK 1.8@945322)
befcaa3 Revert "SGXUM: Add allocation of images from system heap"
2a6a57a Revert "SGXKM: Add allocation from ION system heap"
d3f79fb Revert "SGX UM: Bridge lock rework"
db5672c Revert "SGX KM: Bridge lock rework"
5cfc1aa gralloc: add support for GRALLOC_USAGE_EXCLUSIVE_DISP
88b43ea gralloc: publicly define omap specific usage flags
8b9555d gralloc: remove unused entry from public framebuffer interface
ef2bc78 Merge "PVR-UM/KM: Support Jellybean build" into ti_ics_1.8
8247309 Merge "PVR-UM: Make pvrsrvinit wrapper compatible with Jellybean
0d7410c PVR-UM/KM: Support Jellybean build
f269b1f PVR-UM: Make pvrsrvinit wrapper compatible with Jellybean
Change-Id: Ic6a09d5f6f3a266c83da12b472d367042ac47c38
Signed-off-by: Tony Lofthouse <a0741364@ti.com>
Change-Id: Ic67c6466162669bd4c517faa56b897d2b71ff323
SGX-BIN: DDK update 1.8@945322
7d95406 pvr-km: Do not strip debug symbols from kernel module
582d243 SGXKM: Incresed XPROC_WORKAROUND to 500
1a96424 SGX UM: HAL block OpenPVRServices until services initialized
ccf4286 SGXUM: Add allocation of images from system heap
6a61ac6 SGXKM: Adds support for 1D buffer allocation
a7bb574 SGXKM: Make the DMM offset optional
e579ec6 Merge branch 'img_ddk_1.8' into ti_ics_1.8 (DDK 1.8@945322)
befcaa3 Revert "SGXUM: Add allocation of images from system heap"
2a6a57a Revert "SGXKM: Add allocation from ION system heap"
d3f79fb Revert "SGX UM: Bridge lock rework"
db5672c Revert "SGX KM: Bridge lock rework"
Change-Id: I6a5c003b47a338dd3d6893741b3dd1019e1ad4bd
Signed-off-by: Tate Hornbeck <tate.hornbeck@ti.com>
7d95406 pvr-km: Do not strip debug symbols from kernel module
582d243 SGXKM: Incresed XPROC_WORKAROUND to 500
1a96424 SGX UM: HAL block OpenPVRServices until services initialized
ccf4286 SGXUM: Add allocation of images from system heap
6a61ac6 SGXKM: Adds support for 1D buffer allocation
a7bb574 SGXKM: Make the DMM offset optional
e579ec6 Merge branch 'img_ddk_1.8' into ti_ics_1.8 (DDK 1.8@945322)
befcaa3 Revert "SGXUM: Add allocation of images from system heap"
2a6a57a Revert "SGXKM: Add allocation from ION system heap"
d3f79fb Revert "SGX UM: Bridge lock rework"
db5672c Revert "SGX KM: Bridge lock rework"
Change-Id: I6a5c003b47a338dd3d6893741b3dd1019e1ad4bd
Signed-off-by: Tate Hornbeck <tate.hornbeck@ti.com>
Merge "[WFD]: Added WFD specific make files and Sharedlibraries." into ics-mr1
SGX-BIN: DDK update
5cfc1aa gralloc: add support for GRALLOC_USAGE_EXCLUSIVE_DISP
88b43ea gralloc: publicly define omap specific usage flags
8b9555d gralloc: remove unused entry from public framebuffer interface
0d7410c PVR-UM/KM: Support Jellybean build
f269b1f PVR-UM: Make pvrsrvinit wrapper compatible with Jellybean
Kernel modules built against:
Kernel Version: 3.0.31 with CONFIG_MODVERSIONS=y
Kernel branch: p-android-omap-3.0-dev
At least commit 7d242d0771584e7fe33603e230dc4e5f8bf7b9f6
Change-Id: Ie591b96dc2155d4d7394b98284948366876d91c0
Signed-off-by: Tony Lofthouse <a0741364@ti.com>
Signed-off-by: Hemant Hariyani <hemanthariyani@ti.com>
5cfc1aa gralloc: add support for GRALLOC_USAGE_EXCLUSIVE_DISP
88b43ea gralloc: publicly define omap specific usage flags
8b9555d gralloc: remove unused entry from public framebuffer interface
0d7410c PVR-UM/KM: Support Jellybean build
f269b1f PVR-UM: Make pvrsrvinit wrapper compatible with Jellybean
Kernel modules built against:
Kernel Version: 3.0.31 with CONFIG_MODVERSIONS=y
Kernel branch: p-android-omap-3.0-dev
At least commit 7d242d0771584e7fe33603e230dc4e5f8bf7b9f6
Change-Id: Ie591b96dc2155d4d7394b98284948366876d91c0
Signed-off-by: Tony Lofthouse <a0741364@ti.com>
Signed-off-by: Hemant Hariyani <hemanthariyani@ti.com>
[WFD]: Added WFD specific make files and Sharedlibraries.
Description: Added Wifi Display related make files and the corresponding
shared libraries(libwfdservice.so and libwfd_mpeg2tsrtp.so).
Change-Id: I3bebd6ed8c936dc1e8657d7a2526cee38172e64d
Signed-off-by: Santhosh Behara <santhosh.behara@ti.com>
Description: Added Wifi Display related make files and the corresponding
shared libraries(libwfdservice.so and libwfd_mpeg2tsrtp.so).
Change-Id: I3bebd6ed8c936dc1e8657d7a2526cee38172e64d
Signed-off-by: Santhosh Behara <santhosh.behara@ti.com>
SGX-BIN: Rebuilt for 512MB feature
The 512MB feature changed the ABI between
kernel and SGX modules and thus required
a rebuild.
Change-Id: I5026905026f10f66cc741799f81da87cd137c25d
Signed-off-by: Tate Hornbeck <tate.hornbeck@ti.com>
The 512MB feature changed the ABI between
kernel and SGX modules and thus required
a rebuild.
Change-Id: I5026905026f10f66cc741799f81da87cd137c25d
Signed-off-by: Tate Hornbeck <tate.hornbeck@ti.com>
SGX BIN: omaplfb changes
- omaplfb: Remove buffer skipping when allocating swapchain
- omaplfb: bv: Set BVBATCH_DST when destination format changes
Change-Id: I83e1969baa1f75d0999abeda7e45518a36aba479
Signed-off-by: Tate Hornbeck <tate.hornbeck@ti.com>
- omaplfb: Remove buffer skipping when allocating swapchain
- omaplfb: bv: Set BVBATCH_DST when destination format changes
Change-Id: I83e1969baa1f75d0999abeda7e45518a36aba479
Signed-off-by: Tate Hornbeck <tate.hornbeck@ti.com>
SGX-BIN: SGX Driver update for CONFIG_MODVERSIONS
These binaries have been built against kernel
version 3.0.31 with CONFIG_MODVERSIONS enabled.
Depends on http://review.omapzoom.org/#/c/23152/ .
Change-Id: Ia09c83d31fdc5e661c93bf3cfcb065fc550d0031
Signed-off-by: Tate Hornbeck <tate.hornbeck@ti.com>
These binaries have been built against kernel
version 3.0.31 with CONFIG_MODVERSIONS enabled.
Depends on http://review.omapzoom.org/#/c/23152/ .
Change-Id: Ia09c83d31fdc5e661c93bf3cfcb065fc550d0031
Signed-off-by: Tate Hornbeck <tate.hornbeck@ti.com>
SGX-BIN: SGX Driver update
Rebuilt for compatibility with DSSCOMP mem2mem
writeback support that was introduced by
http://review.omapzoom.org/#/c/22286/3 .
Change-Id: I9b7f97d922c561d10b92a19645a4da7d6285f074
Signed-off-by: Tate Hornbeck <tate.hornbeck@ti.com>
Rebuilt for compatibility with DSSCOMP mem2mem
writeback support that was introduced by
http://review.omapzoom.org/#/c/22286/3 .
Change-Id: I9b7f97d922c561d10b92a19645a4da7d6285f074
Signed-off-by: Tate Hornbeck <tate.hornbeck@ti.com>
SGX-BIN: SGX Driver (1.8@869593) with CPCAM support
This SGX binary package has all necessary CPCAM
patches included. A new README.SGX is now located
in device/ti/proprietary-open/omap4 with the commit
id and branch that these binaries were built from.
The SGX kernel side source has now moved to
sgx_src/eurasia_km.tgz.
Change-Id: I57288feaa4e5eb95d651931db9cc8e6000a38db8
Signed-off-by: Tate Hornbeck <tate.hornbeck@ti.com>
This SGX binary package has all necessary CPCAM
patches included. A new README.SGX is now located
in device/ti/proprietary-open/omap4 with the commit
id and branch that these binaries were built from.
The SGX kernel side source has now moved to
sgx_src/eurasia_km.tgz.
Change-Id: I57288feaa4e5eb95d651931db9cc8e6000a38db8
Signed-off-by: Tate Hornbeck <tate.hornbeck@ti.com>
wlan: Upgrading firmware to R5.00.18 package from R5.00.14
Firmware for WL128X:
wl128x-fw-4-sr.bin FRev 7.3.8.0.111
wl128x-fw-4-plt.bin FPLT 7.3.8.0.111
wl128x-fw-4-mr.bin FRev 7.5.5.0.21
Firmware for WL127X:
wl127x-fw-4-sr.bin FRev 6.3.8.0.111
wl127x-fw-4-plt.bin FPLT 6.3.8.0.111
wl127x-fw-4-mr.bin FRev 6.5.5.0.21
R5.00.18 package upgradation needs the following patches also:
for hardware/ti/wlan:
http://review.omapzoom.org/22272
for external/wpa_supplicant_8:
http://review.omapzoom.org/22273
Change-Id: Id1081914342b297e7bbefd3d9ba89ac0acbd434c
Signed-off-by: Panduranga Mallireddy <panduranga_mallireddy@ti.com>
Firmware for WL128X:
wl128x-fw-4-sr.bin FRev 7.3.8.0.111
wl128x-fw-4-plt.bin FPLT 7.3.8.0.111
wl128x-fw-4-mr.bin FRev 7.5.5.0.21
Firmware for WL127X:
wl127x-fw-4-sr.bin FRev 6.3.8.0.111
wl127x-fw-4-plt.bin FPLT 6.3.8.0.111
wl127x-fw-4-mr.bin FRev 6.5.5.0.21
R5.00.18 package upgradation needs the following patches also:
for hardware/ti/wlan:
http://review.omapzoom.org/22272
for external/wpa_supplicant_8:
http://review.omapzoom.org/22273
Change-Id: Id1081914342b297e7bbefd3d9ba89ac0acbd434c
Signed-off-by: Panduranga Mallireddy <panduranga_mallireddy@ti.com>
SGX-BIN: Update SGX driver (1.8@869593)
Bug fixes:
- glCopyTexSubImage2D texture corruption
- PVR2D blit Y plane offset
- SGXCleanupRequest kernel panic
- OMAPLFB memory leak
Change-Id: Id567894463358eb5f54ed939d752939e9390083d
Signed-off-by: Tate Hornbeck <tate.hornbeck@ti.com>
Bug fixes:
- glCopyTexSubImage2D texture corruption
- PVR2D blit Y plane offset
- SGXCleanupRequest kernel panic
- OMAPLFB memory leak
Change-Id: Id567894463358eb5f54ed939d752939e9390083d
Signed-off-by: Tate Hornbeck <tate.hornbeck@ti.com>
Merge "Updated COM6/7 Firmware for R8.a1.05 driver" into ics-mr1
Merge "wpan: remove BT/FM/NFC WL8 firmware" into ics-mr1
Merge "wl12xx: Add BTFM firmwares for COM7 chipset" into ics-mr1
Updated COM6/7 Firmware for R8.a1.05 driver
Adding an upgraded firmware for COM6/7 corresponding to R8.a1.05 driver
Firmware version number:
For 128x:
wl128x-fw-4-sr.bin: FRev 7.3.7.0.105
wl128x-fw-4-mr.bin: FRev 7.5.4.0.20
wl128x-fw-4-plt.bin: FPLT 7.3.7.0.105
For 127x:
wl127x-fw-4-sr.bin: FRev 6.3.7.0.105
wl127x-fw-4-mr.bin: FRev 6.5.4.0.20
wl127x-fw-4-plt.bin: FPLT 6.3.7.0.105
Upgrade to NLCP R8_a1_05 package requires the following patches also:
hardware/ti/wlan
http://review.omapzoom.org/21531
http://review.omapzoom.org/21655
external/wpa_supplicant_8
http://review.omapzoom.org/21623
Change-Id: Ia4e29d62a431ce50ae7b987e742417b091f1701d
Signed-off-by: Pradeep Gurumath <pradeepgurumath@ti.com>
Adding an upgraded firmware for COM6/7 corresponding to R8.a1.05 driver
Firmware version number:
For 128x:
wl128x-fw-4-sr.bin: FRev 7.3.7.0.105
wl128x-fw-4-mr.bin: FRev 7.5.4.0.20
wl128x-fw-4-plt.bin: FPLT 7.3.7.0.105
For 127x:
wl127x-fw-4-sr.bin: FRev 6.3.7.0.105
wl127x-fw-4-mr.bin: FRev 6.5.4.0.20
wl127x-fw-4-plt.bin: FPLT 6.3.7.0.105
Upgrade to NLCP R8_a1_05 package requires the following patches also:
hardware/ti/wlan
http://review.omapzoom.org/21531
http://review.omapzoom.org/21655
external/wpa_supplicant_8
http://review.omapzoom.org/21623
Change-Id: Ia4e29d62a431ce50ae7b987e742417b091f1701d
Signed-off-by: Pradeep Gurumath <pradeepgurumath@ti.com>
wpan: remove BT/FM/NFC WL8 firmware
Remove Bluetooth, fmradio and NFC firmware.
Change-Id: I0f0e14717126f7547f6501f90d7c8abb97da60c0
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Remove Bluetooth, fmradio and NFC firmware.
Change-Id: I0f0e14717126f7547f6501f90d7c8abb97da60c0
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
wl12xx: Add BTFM firmwares for COM7 chipset
This patch updates BT script to NLCP R5.0 RC4
1) TIInit_10.6.15.bts - SP 2.3
Change-Id: I45b95b26e866ac7e8497d680fdf5343f10dda6ee
Signed-off-by: Shitiz Kumar <shitiz_kumar@ti.com>
This patch updates BT script to NLCP R5.0 RC4
1) TIInit_10.6.15.bts - SP 2.3
Change-Id: I45b95b26e866ac7e8497d680fdf5343f10dda6ee
Signed-off-by: Shitiz Kumar <shitiz_kumar@ti.com>
wl12xx:wlan: Remove wl18xx firmware file
Remove wl18xx firmware file till we figure out the right license
Change-Id: I639f99e4560f4831382d5e03ce01b8236f43e504
Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
Remove wl18xx firmware file till we figure out the right license
Change-Id: I639f99e4560f4831382d5e03ce01b8236f43e504
Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
Move subdir include to top of Android.mk
Having the Android.mk inclusion at the bottom of the Android.mk is
causing it to be ignored, which meand SGX/wlan/etc are no longer
installed. Moving it to the top makes it work, and the subsequent
ducati definition works as well.
Change-Id: Idcbce941b9e3b60906421b0cf944160d41ac027b
Signed-off-by: James W. Mills <jameswmills@ti.com>
Having the Android.mk inclusion at the bottom of the Android.mk is
causing it to be ignored, which meand SGX/wlan/etc are no longer
installed. Moving it to the top makes it work, and the subsequent
ducati definition works as well.
Change-Id: Idcbce941b9e3b60906421b0cf944160d41ac027b
Signed-off-by: James W. Mills <jameswmills@ti.com>
Merge "Updated Ducati installation logic" into ics-mr1
Updated Ducati installation logic
This patch moves the ducati installation logic into the top-level
Android.mk for proprietary-open, and generalizes the procedure so that
new devices can be added easily. Benefis include:
* Unpacking into an intermediate location
* Only unpacked if enabled for a specific device
* All devices can use the same PRODUCT_PACKAGE definition
* User-defined ducati TGZ location
Change-Id: I48314920b138230e73b3a56e1ff899ad82289b59
Signed-off-by: James W. Mills <jameswmills@ti.com>
This patch moves the ducati installation logic into the top-level
Android.mk for proprietary-open, and generalizes the procedure so that
new devices can be added easily. Benefis include:
* Unpacking into an intermediate location
* Only unpacked if enabled for a specific device
* All devices can use the same PRODUCT_PACKAGE definition
* User-defined ducati TGZ location
Change-Id: I48314920b138230e73b3a56e1ff899ad82289b59
Signed-off-by: James W. Mills <jameswmills@ti.com>
SGX-BIN: Update SGX driver
Contains SGX user mode binaries and kernel modules.
Required kernel version: 3.0.21-00003-OMAP-Android
This update contains the following features:
+ omaplfb: Give support for dirty region handling
+ omaplfb: Use platform data for configuration
+ omaplfb and PVR services changes according to
Bltsville header file updates
Change-Id: I2d13121f0d6e6519c5d9b235ce05329a0c1aaf55
Signed-off-by: Gustavo Diaz Prado <a0273371@ti.com>
Contains SGX user mode binaries and kernel modules.
Required kernel version: 3.0.21-00003-OMAP-Android
This update contains the following features:
+ omaplfb: Give support for dirty region handling
+ omaplfb: Use platform data for configuration
+ omaplfb and PVR services changes according to
Bltsville header file updates
Change-Id: I2d13121f0d6e6519c5d9b235ce05329a0c1aaf55
Signed-off-by: Gustavo Diaz Prado <a0273371@ti.com>
SGX-BIN: Update SGX driver (1.8@869593)
Contains SGX user mode binaries and kernel modules.
Required kernel version: 3.0.21-00002-OMAP-Android
Change-Id: Ib4adddd90f691de17756f6e4042d04d5d8d27f1f
Signed-off-by: Hemant Hariyani <hemanthariyani@ti.com>
Contains SGX user mode binaries and kernel modules.
Required kernel version: 3.0.21-00002-OMAP-Android
Change-Id: Ib4adddd90f691de17756f6e4042d04d5d8d27f1f
Signed-off-by: Hemant Hariyani <hemanthariyani@ti.com>
SGX-BIN: Update SGX driver (1.8@866404)
Contains SGX user mode binaries and kernel modules.
Required kernel version: 3.0.21-00002-OMAP-Android
Change-Id: I22e6a877af3dddc9953dcf76d3e472aacad67f55
Signed-off-by: Tate Hornbeck <tate.hornbeck@ti.com>
Contains SGX user mode binaries and kernel modules.
Required kernel version: 3.0.21-00002-OMAP-Android
Change-Id: I22e6a877af3dddc9953dcf76d3e472aacad67f55
Signed-off-by: Tate Hornbeck <tate.hornbeck@ti.com>
Merge "Updated COM8 Firmware for R8.a1.03 driver" into ics-mr1
Merge "wl12xx: Add BTFM firmwares for COM8 chipset" into ics-mr1
SGX-BIN: Update SGX driver (1.8@840215+)
bug fixes
Change-Id: Ia3c74ac631165ae3333774215aa2ded2e1bed2e1
Signed-off-by: Tate Hornbeck <tate.hornbeck@ti.com>
bug fixes
Change-Id: Ia3c74ac631165ae3333774215aa2ded2e1bed2e1
Signed-off-by: Tate Hornbeck <tate.hornbeck@ti.com>
wl12xx: Add BTFM firmwares for COM8 chipset
This patch adds below scripts
1) TIInit_12.7.27.bts - SP 1.3
2) fmc_ch8_1893.2.bts - v 1.6
3) fm_rx_ch8_1893.2.bts - v 1.6
4) fm_tx_ch8_1893.2.bts - v 1.6
5) TIInit_11.7.27.bts - SP 1.3
Change-Id: Ib5655d16278b30fd55b55e36aad7a38fcda35bf9
Signed-off-by: Shitiz Kumar <shitiz_kumar@ti.com>
This patch adds below scripts
1) TIInit_12.7.27.bts - SP 1.3
2) fmc_ch8_1893.2.bts - v 1.6
3) fm_rx_ch8_1893.2.bts - v 1.6
4) fm_tx_ch8_1893.2.bts - v 1.6
5) TIInit_11.7.27.bts - SP 1.3
Change-Id: Ib5655d16278b30fd55b55e36aad7a38fcda35bf9
Signed-off-by: Shitiz Kumar <shitiz_kumar@ti.com>
wpan:nfc: Adding new firmware file
Addng the new firmware file for NFC to
support NCI draft 9
Signed-off-by: x0099048 <x0099048@ti.com>
amir <amira@ti.com>
Change-Id: I4688ad776bada9d297d50ac206aae3d7a0d00c38
Addng the new firmware file for NFC to
support NCI draft 9
Signed-off-by: x0099048 <x0099048@ti.com>
amir <amira@ti.com>
Change-Id: I4688ad776bada9d297d50ac206aae3d7a0d00c38
Updated COM8 Firmware for R8.a1.03 driver
Adding a new set of firmware for COM8 corresponding to R8.a1.03 driver
Firmware version number:
wl18xx-fw.bin : FRev 8.1.20.4.79
Change-Id: Ic27e922ad5455aece8cc474705ea6968d0d7e082
Signed-off-by: Pradeep Gurumath <pradeepgurumath@ti.com>
Adding a new set of firmware for COM8 corresponding to R8.a1.03 driver
Firmware version number:
wl18xx-fw.bin : FRev 8.1.20.4.79
Change-Id: Ic27e922ad5455aece8cc474705ea6968d0d7e082
Signed-off-by: Pradeep Gurumath <pradeepgurumath@ti.com>
SGX-BIN: Update SGX driver (1.8@840215+fixes)
Contains SGX user mode binaries and kernel modules.
Required kernel version: 3.0.21-00002-OMAP-Android
Change-Id: Ie994cb53dfe1e85adf8d0f949abd03bc3fd42e63
Signed-off-by: Hemant Hariyani <hemanthariyani@ti.com>
Contains SGX user mode binaries and kernel modules.
Required kernel version: 3.0.21-00002-OMAP-Android
Change-Id: Ie994cb53dfe1e85adf8d0f949abd03bc3fd42e63
Signed-off-by: Hemant Hariyani <hemanthariyani@ti.com>
Merge "SGX-BIN: Update SGX driver (1.8@840215) w/SGX kernel modules" into ics-mr1
SGX-BIN: Update SGX driver (1.8@840215) w/SGX kernel modules
DDK upgrade - 1.8@840215
Also, SGX kernel driver is now built as a separate module. In-kernel
driver should not be used. This binary includes pre-built
modules.
Change-Id: I0259aefa62ceef52c0b734a77a86a02258f88922
Signed-off-by: Hemant Hariyani <hemanthariyani@ti.com>
DDK upgrade - 1.8@840215
Also, SGX kernel driver is now built as a separate module. In-kernel
driver should not be used. This binary includes pre-built
modules.
Change-Id: I0259aefa62ceef52c0b734a77a86a02258f88922
Signed-off-by: Hemant Hariyani <hemanthariyani@ti.com>
Updated COM8 Firmware for R8.a1.02 driver
Adding a new set of firmware for COM8 corresponding to R8.a1.02 driver
Firmware version number:
wl18xx-fw.bin : FRev 8.1.20.4.77
Change-Id: Idb1ed7b1237a6bfc0ce1f057ba43906e10e5e8b6
Signed-off-by: Pradeep Gurumath <pradeepgurumath@ti.com>
Adding a new set of firmware for COM8 corresponding to R8.a1.02 driver
Firmware version number:
wl18xx-fw.bin : FRev 8.1.20.4.77
Change-Id: Idb1ed7b1237a6bfc0ce1f057ba43906e10e5e8b6
Signed-off-by: Pradeep Gurumath <pradeepgurumath@ti.com>
Merge "[proprietary-open] Upload R5_00_08 wl12xx firmware files" into ics-mr1
Merge "[proprietary-open]: wl12xx: Upload WLAN R5_00_05 firmware files" into ics-mr1
[proprietary-open] Upload R5_00_08 wl12xx firmware files
Added new firmware files for wl128x /wl127x from R5_00_08 package
Change-Id: I665d478e7b50d78a730c6fade8df7af1cc6cf667
Signed-off-by: Panduranga Mallireddy <x0125717@ti.com>
Added new firmware files for wl128x /wl127x from R5_00_08 package
Change-Id: I665d478e7b50d78a730c6fade8df7af1cc6cf667
Signed-off-by: Panduranga Mallireddy <x0125717@ti.com>
[proprietary-open]: wl12xx: Upload WLAN R5_00_05 firmware files
Upload WLAN R5_00_05 firmware files to proprietary-open.
Change-Id: I1f530357cf80aea82794c46198027c6cc3a8944c
Signed-off-by: Panduranga Mallireddy <x0125717@ti.com>
Upload WLAN R5_00_05 firmware files to proprietary-open.
Change-Id: I1f530357cf80aea82794c46198027c6cc3a8944c
Signed-off-by: Panduranga Mallireddy <x0125717@ti.com>
BT: Upgraded BT firmware to Service Pack 1.2
SP1.2 @TI_P1.38
Change-Id: I6cc49cb13752e1d430c022f51538b6bb5df3283a
Signed-off-by: Shitiz Kumar <shitiz_kumar@ti.com>
SP1.2 @TI_P1.38
Change-Id: I6cc49cb13752e1d430c022f51538b6bb5df3283a
Signed-off-by: Shitiz Kumar <shitiz_kumar@ti.com>
device:ti:proprietary-open: Add BT firmware script for COM8
Also this patch adds firmware scripts for FM TX on COM6 modules.
Should be merged with: http://review.omapzoom.org/#/c/19195/
Change-Id: Ibb69f649a67e37fa8efee30889e3297e559bb540
Signed-off-by: Manjunatha Halli <x0130808@ti.com>
Also this patch adds firmware scripts for FM TX on COM6 modules.
Should be merged with: http://review.omapzoom.org/#/c/19195/
Change-Id: Ibb69f649a67e37fa8efee30889e3297e559bb540
Signed-off-by: Manjunatha Halli <x0130808@ti.com>
SGX: DDK upgrade with NV12 texture fix on 1.8@796887
This upgrade fixes the problem where NV12 texture was not visible
when there was an RGB layer on top.
Change-Id: I206954e8e468f402e7ce19d779d5bf066578d339
Signed-off-by: Hemant Hariyani <hemanthariyani@ti.com>
This upgrade fixes the problem where NV12 texture was not visible
when there was an RGB layer on top.
Change-Id: I206954e8e468f402e7ce19d779d5bf066578d339
Signed-off-by: Hemant Hariyani <hemanthariyani@ti.com>
Merge "SGX: Upgrade SGX driver to version 1.8@796887" into ics-mr1
SGX: Upgrade SGX driver to version 1.8@796887
SGX binaries for OMAP4. Version 1.8@796887.
Change-Id: I2b79d9c275a6519d1f9aea06fe6c6ae9d90b839a
Signed-off-by: Hemant Hariyani <hemanthariyani@ti.com>
SGX binaries for OMAP4. Version 1.8@796887.
Change-Id: I2b79d9c275a6519d1f9aea06fe6c6ae9d90b839a
Signed-off-by: Hemant Hariyani <hemanthariyani@ti.com>
device:ti:proprietary-open: add wpan firmware
Add the wpan.tgz firmware tarball which constitutes of the firmware and the
right LICENSE for them.
Also add in the line in Android.mk to untar them to the relevant folder from
where they will be picked up to be installed into the relevant folder on
/system/etc/firmware/.
Change-Id: Ie2a7af0febb072862bbeb45039625ba810923766
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Conflicts:
Android.mk
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Add the wpan.tgz firmware tarball which constitutes of the firmware and the
right LICENSE for them.
Also add in the line in Android.mk to untar them to the relevant folder from
where they will be picked up to be installed into the relevant folder on
/system/etc/firmware/.
Change-Id: Ie2a7af0febb072862bbeb45039625ba810923766
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Conflicts:
Android.mk
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Merge "SGX: DDK update for 2D blit support" into ics-mr1
SGX: DDK update for 2D blit support
From ti_ics_1.8 gerrit.ext.ti.com/img-ddk-linux-android
Commits:
d932e8d Merge "Gralloc: fb: Add a flag to force searching a free framebuffer if needed" into t
Change-Id: Ieb454b19c645b6a2ad77136b13f326d50f3f53d0
Signed-off-by: Tony Lofthouse <a0741364@ti.com>
From ti_ics_1.8 gerrit.ext.ti.com/img-ddk-linux-android
Commits:
d932e8d Merge "Gralloc: fb: Add a flag to force searching a free framebuffer if needed" into t
Change-Id: Ieb454b19c645b6a2ad77136b13f326d50f3f53d0
Signed-off-by: Tony Lofthouse <a0741364@ti.com>
Update ducati mk files to use literal TARGET_PRODUCT values
The build system sources ALL devices during the lunch command, and
this is causing it to look for ducati_$(TARGET_PRODUCT) files even
when there are not any. Rewritten to be explicit about full_blaze and
blaze_tablet so that all devices behave as expected.
Change-Id: Ib73156f330b449682394e7fe7812d6f4e3a75a97
Signed-off-by: James W. Mills <jameswmills@ti.com>
The build system sources ALL devices during the lunch command, and
this is causing it to look for ducati_$(TARGET_PRODUCT) files even
when there are not any. Rewritten to be explicit about full_blaze and
blaze_tablet so that all devices behave as expected.
Change-Id: Ib73156f330b449682394e7fe7812d6f4e3a75a97
Signed-off-by: James W. Mills <jameswmills@ti.com>
Updated GFX for both 4430/60 and 4470
These drivers should work for both 4430/4460 and 4470 boards
Change-Id: I67bf4d910ac776960aad6d043cd553cc6d545561
Signed-off-by: James W. Mills <jameswmills@ti.com>
These drivers should work for both 4430/4460 and 4470 boards
Change-Id: I67bf4d910ac776960aad6d043cd553cc6d545561
Signed-off-by: James W. Mills <jameswmills@ti.com>
Ducati binary fw and DCC files for Blaze
This patch includes the files needed to install Ducati fw and DCC
files for the Blaze.
Versions of Ducati can be dropped in with an accompanying mk file, and
each device capable of using that version of ducati can include the
makefile at the device level.
Change-Id: I10a61dab74b18acc2de3d2af93094009770baba2
Signed-off-by: James W. Mills <jameswmills@ti.com>
This patch includes the files needed to install Ducati fw and DCC
files for the Blaze.
Versions of Ducati can be dropped in with an accompanying mk file, and
each device capable of using that version of ducati can include the
makefile at the device level.
Change-Id: I10a61dab74b18acc2de3d2af93094009770baba2
Signed-off-by: James W. Mills <jameswmills@ti.com>
Ducati binary fw and DCC files for Blaze Tablet
This patch includes the files needed to install Ducati fw and DCC
files for the Blaze Tablet.
Versions of Ducati can be dropped in with an accompanying mk file, and
each device capable of using that version of ducati can include the
makefile at the device level
Change-Id: I1df3fb99eac48106032a404184f09668d0148cda
Signed-off-by: James W. Mills <jameswmills@ti.com>
This patch includes the files needed to install Ducati fw and DCC
files for the Blaze Tablet.
Versions of Ducati can be dropped in with an accompanying mk file, and
each device capable of using that version of ducati can include the
makefile at the device level
Change-Id: I1df3fb99eac48106032a404184f09668d0148cda
Signed-off-by: James W. Mills <jameswmills@ti.com>
[proprietary-open] Update WLAN firmware file
Updating WLAN firmware and plt files
wl128x - 7.3.5.0.79 to 7.3.7.0.79
wl127x - 6.3.5.0.79 to 6.3.7.0.79
Change-Id: I8fe5996bfcb26d517253f9e24ec43c73f878f7f9
Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
Updating WLAN firmware and plt files
wl128x - 7.3.5.0.79 to 7.3.7.0.79
wl127x - 6.3.5.0.79 to 6.3.7.0.79
Change-Id: I8fe5996bfcb26d517253f9e24ec43c73f878f7f9
Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
[proprietary-open] Update WLAN firmware file
Updating WLAN firmware file for wl1283.
Change-Id: I4830c4a66057bd46cdcb2dc1094576f616dbcbe1
Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
Updating WLAN firmware file for wl1283.
Change-Id: I4830c4a66057bd46cdcb2dc1094576f616dbcbe1
Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
proprietary-open - Update wl12xx/wlan firmware
Update WLAN firmware to R4_SP2 version
Change-Id: Ibb4eb34f113e93c4c21496d0a0f592b2d66c26b8
Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
Update WLAN firmware to R4_SP2 version
Change-Id: Ibb4eb34f113e93c4c21496d0a0f592b2d66c26b8
Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
Updated DDK
Change-Id: I3fa11aa320f825f5676f93875a44fb7c4957de34
Signed-off-by: James W. Mills <jameswmills@ti.com>
Change-Id: I3fa11aa320f825f5676f93875a44fb7c4957de34
Signed-off-by: James W. Mills <jameswmills@ti.com>
No longer force reinstallation on every build
The tgz delivered content is no longer installed every time you run
make. Instead, it adheres to normal Makefile rules.
Change-Id: Ia9f33f14b10b1706ad1f0e6d42fdeed4076b1414
Signed-off-by: James W. Mills <jameswmills@ti.com>
The tgz delivered content is no longer installed every time you run
make. Instead, it adheres to normal Makefile rules.
Change-Id: Ia9f33f14b10b1706ad1f0e6d42fdeed4076b1414
Signed-off-by: James W. Mills <jameswmills@ti.com>
Moved the ducati Android.mk into the filesystem, and updated the module name
Change-Id: I11fb179dc922118ba7e791621676d7bc6fe706ac
Signed-off-by: James W. Mills <jameswmills@ti.com>
Change-Id: I11fb179dc922118ba7e791621676d7bc6fe706ac
Signed-off-by: James W. Mills <jameswmills@ti.com>
Upped the version of the DDK to match the kernel. I've also added the Android.mk file from the update DDK so that the first pass make system picks it up as expected.
Change-Id: Ief0b0d770a90c9fc8f32556204cf7e11a78ecc78
Signed-off-by: James W. Mills <jameswmills@ti.com>
Change-Id: Ief0b0d770a90c9fc8f32556204cf7e11a78ecc78
Signed-off-by: James W. Mills <jameswmills@ti.com>
Licensed ducati bundle
Release a binary version of Ducati, complete with DCC files, all under
license.
Change-Id: I62f1784dfb1b815e8f58b69716b19bb53ca32b2e
Signed-off-by: James W. Mills <jameswmills@ti.com>
Release a binary version of Ducati, complete with DCC files, all under
license.
Change-Id: I62f1784dfb1b815e8f58b69716b19bb53ca32b2e
Signed-off-by: James W. Mills <jameswmills@ti.com>
Move licensed content to tgz archives
This change allows all licensed material to be license-bound, and
prevents any single component from being downloaded without the proper
license agreement.
Change-Id: I353122644b1696438a7c7a33a26d43087e19440a
Signed-off-by: James W. Mills <jameswmills@ti.com>
This change allows all licensed material to be license-bound, and
prevents any single component from being downloaded without the proper
license agreement.
Change-Id: I353122644b1696438a7c7a33a26d43087e19440a
Signed-off-by: James W. Mills <jameswmills@ti.com>
Merge "[proprietary-open] Upload WLAN firmware files" into ics-mr0