ARM: DRA7xx: Lock DPLL_GMAC

[glsdk/glsdk-u-boot.git] / Makefile

diff --git a/Makefile b/Makefile
index 19ac8f5b8add59b2a08ffadc7f7f2429b63504d7..3fd6d156c2b51b498aca3b8622b3bcd843b12a04 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -22,9 +22,9 @@
 #
 
 VERSION = 2013
-PATCHLEVEL = 01
+PATCHLEVEL = 04
 SUBLEVEL =
-EXTRAVERSION = -rc1
+EXTRAVERSION =
 ifneq "$(SUBLEVEL)" ""
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 else
@@ -46,12 +46,7 @@ HOSTARCH := $(shell uname -m | \
 HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
            sed -e 's/\(cygwin\).*/cygwin/')
 
-# Set shell to bash if possible, otherwise fall back to sh
-SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
-       else if [ -x /bin/bash ]; then echo /bin/bash; \
-       else echo sh; fi; fi)
-
-export HOSTARCH HOSTOS SHELL
+export HOSTARCH HOSTOS
 
 # Deal with colliding definitions from tcsh etc.
 VENDOR=
@@ -230,10 +225,6 @@ endif
 # U-Boot objects....order is important (i.e. start must be first)
 
 OBJS  = $(CPUDIR)/start.o
-ifeq ($(CPU),x86)
-RESET_OBJS-$(CONFIG_X86_NO_RESET_VECTOR) += $(CPUDIR)/start16.o
-RESET_OBJS-$(CONFIG_X86_NO_RESET_VECTOR) += $(CPUDIR)/resetvec.o
-endif
 ifeq ($(CPU),ppc4xx)
 OBJS += $(CPUDIR)/resetvec.o
 endif
@@ -241,7 +232,7 @@ ifeq ($(CPU),mpc85xx)
 OBJS += $(CPUDIR)/resetvec.o
 endif
 
-OBJS := $(addprefix $(obj),$(OBJS) $(RESET_OBJS-))
+OBJS := $(addprefix $(obj),$(OBJS))
 
 HAVE_VENDOR_COMMON_LIB = $(if $(wildcard board/$(VENDOR)/common/Makefile),y,n)
 
@@ -268,6 +259,7 @@ LIBS-y += fs/libfs.o \
        fs/fdos/libfdos.o \
        fs/jffs2/libjffs2.o \
        fs/reiserfs/libreiserfs.o \
+       fs/sandbox/libsandboxfs.o \
        fs/ubifs/libubifs.o \
        fs/yaffs2/libyaffs2.o \
        fs/zfs/libzfs.o
@@ -276,6 +268,7 @@ LIBS-y += disk/libdisk.o
 LIBS-y += drivers/bios_emulator/libatibiosemu.o
 LIBS-y += drivers/block/libblock.o
 LIBS-$(CONFIG_BOOTCOUNT_LIMIT) += drivers/bootcount/libbootcount.o
+LIBS-y += drivers/crypto/libcrypto.o
 LIBS-y += drivers/dma/libdma.o
 LIBS-y += drivers/fpga/libfpga.o
 LIBS-y += drivers/gpio/libgpio.o
@@ -316,7 +309,8 @@ LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
 endif
 LIBS-y += drivers/rtc/librtc.o
 LIBS-y += drivers/serial/libserial.o
-LIBS-$(CONFIG_GENERIC_LPC_TPM) += drivers/tpm/libtpm.o
+LIBS-y += drivers/sound/libsound.o
+LIBS-y += drivers/tpm/libtpm.o
 LIBS-y += drivers/twserial/libtws.o
 LIBS-y += drivers/usb/eth/libusb_eth.o
 LIBS-y += drivers/usb/gadget/libusb_gadget.o
@@ -333,7 +327,7 @@ LIBS-y += api/libapi.o
 LIBS-y += post/libpost.o
 LIBS-y += test/libtest.o
 
-ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
+ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),)
 LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
 endif
 
@@ -347,7 +341,7 @@ endif
 ifeq ($(SOC),exynos)
 LIBS-y += $(CPUDIR)/s5p-common/libs5p-common.o
 endif
-ifeq ($(SOC),tegra20)
+ifneq ($(CONFIG_TEGRA),)
 LIBS-y += arch/$(ARCH)/cpu/$(SOC)-common/lib$(SOC)-common.o
 LIBS-y += arch/$(ARCH)/cpu/tegra-common/libcputegra-common.o
 LIBS-y += $(CPUDIR)/tegra-common/libtegra-common.o
@@ -390,12 +384,12 @@ __LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD))
 ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
 BOARD_SIZE_CHECK = \
        @actual=`wc -c $@ | awk '{print $$1}'`; \
-       limit=$(CONFIG_BOARD_SIZE_LIMIT); \
+       limit=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \
        if test $$actual -gt $$limit; then \
-               echo "$@ exceeds file size limit:"; \
-               echo "  limit:  $$limit bytes"; \
-               echo "  actual: $$actual bytes"; \
-               echo "  excess: $$((actual - limit)) bytes"; \
+               echo "$@ exceeds file size limit:" >&2 ; \
+               echo "  limit:  $$limit bytes" >&2 ; \
+               echo "  actual: $$actual bytes" >&2 ; \
+               echo "  excess: $$((actual - limit)) bytes" >&2; \
                exit 1; \
        fi
 else
@@ -408,11 +402,13 @@ ALL-y += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map
 ALL-$(CONFIG_NAND_U_BOOT) += $(obj)u-boot-nand.bin
 ALL-$(CONFIG_ONENAND_U_BOOT) += $(obj)u-boot-onenand.bin
 ALL-$(CONFIG_SPL) += $(obj)spl/u-boot-spl.bin
-ALL-$(CONFIG_SPL) += $(obj)$(subst ",,$(CONFIG_SPL_TARGET))
 ALL-$(CONFIG_OF_SEPARATE) += $(obj)u-boot.dtb $(obj)u-boot-dtb.bin
+ifneq ($(CONFIG_SPL_TARGET),)
+ALL-$(CONFIG_SPL) += $(obj)$(subst ",,$(CONFIG_SPL_TARGET))
+endif
 
 # enable combined SPL/u-boot/dtb rules for tegra
-ifeq ($(SOC),tegra20)
+ifneq ($(CONFIG_TEGRA),)
 ifeq ($(CONFIG_OF_SEPARATE),y)
 ALL-y += $(obj)u-boot-dtb-tegra.bin
 else
@@ -450,16 +446,24 @@ $(obj)u-boot.ldr.hex:     $(obj)u-boot.ldr
 $(obj)u-boot.ldr.srec: $(obj)u-boot.ldr
                $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary
 
+#
+# U-Boot entry point, needed for booting of full-blown U-Boot
+# from the SPL U-Boot version.
+#
+ifndef CONFIG_SYS_UBOOT_START
+CONFIG_SYS_UBOOT_START := 0
+endif
+
 $(obj)u-boot.img:      $(obj)u-boot.bin
                $(obj)tools/mkimage -A $(ARCH) -T firmware -C none \
-               -O u-boot -a $(CONFIG_SYS_TEXT_BASE) -e 0 \
+               -O u-boot -a $(CONFIG_SYS_TEXT_BASE) \
+               -e $(CONFIG_SYS_UBOOT_START) \
                -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
                        sed -e 's/"[     ]*$$/ for $(BOARD) board"/') \
                -d $< $@
 
-$(obj)u-boot.imx:       $(obj)u-boot.bin
-               $(obj)tools/mkimage -n  $(CONFIG_IMX_CONFIG) -T imximage \
-               -e $(CONFIG_SYS_TEXT_BASE) -d $< $@
+$(obj)u-boot.imx: $(obj)u-boot.bin depend
+               $(MAKE) -C $(SRCTREE)/arch/arm/imx-common $(OBJTREE)/u-boot.imx
 
 $(obj)u-boot.kwb:       $(obj)u-boot.bin
                $(obj)tools/mkimage -n $(CONFIG_SYS_KWD_CONFIG) -T kwbimage \
@@ -476,11 +480,22 @@ $(obj)u-boot.sha1:        $(obj)u-boot.bin
 $(obj)u-boot.dis:      $(obj)u-boot
                $(OBJDUMP) -d $< > $@
 
+
+
 $(obj)u-boot-with-spl.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
-               $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin
+               $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SPL_PAD_TO) \
+                       -I binary -O binary $< $(obj)spl/u-boot-spl-pad.bin
                cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@
                rm $(obj)spl/u-boot-spl-pad.bin
 
+$(obj)u-boot-with-spl.imx: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
+               $(MAKE) -C $(SRCTREE)/arch/arm/imx-common \
+                       $(OBJTREE)/u-boot-with-spl.imx
+
+$(obj)u-boot-with-nand-spl.imx: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
+               $(MAKE) -C $(SRCTREE)/arch/arm/imx-common \
+                       $(OBJTREE)/u-boot-with-nand-spl.imx
+
 $(obj)u-boot.ubl:       $(obj)u-boot-with-spl.bin
                $(obj)tools/mkimage -n $(UBL_CONFIG) -T ublimage \
                -e $(CONFIG_SYS_TEXT_BASE) -d $< $(obj)u-boot.ubl
@@ -498,10 +513,11 @@ $(obj)u-boot.ais:       $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
                        $(obj)u-boot.ais
 
 # Specify the target for use in elftosb call
+ELFTOSB_TARGET-$(CONFIG_MX23) = imx23
 ELFTOSB_TARGET-$(CONFIG_MX28) = imx28
 
 $(obj)u-boot.sb:       $(obj)u-boot.bin $(obj)spl/u-boot-spl.bin
-               elftosb -zdf $(ELFTOSB_TARGET-y) -c $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot-$(ELFTOSB_TARGET-y).bd \
+               elftosb -zf $(ELFTOSB_TARGET-y) -c $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot-$(ELFTOSB_TARGET-y).bd \
                        -o $(obj)u-boot.sb
 
 # On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
@@ -520,7 +536,7 @@ $(obj)u-boot.spr:   $(obj)u-boot.img $(obj)spl/u-boot-spl.bin
                        conv=notrunc 2>/dev/null
                cat $(obj)spl/u-boot-spl-pad.img $(obj)u-boot.img > $@
 
-ifeq ($(SOC),tegra20)
+ifneq ($(CONFIG_TEGRA),)
 ifeq ($(CONFIG_OF_SEPARATE),y)
 nodtb=dtb
 dtbfile=$(obj)u-boot.dtb
@@ -535,6 +551,9 @@ $(obj)u-boot-$(nodtb)-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin $(dtb
                rm $(obj)spl/u-boot-spl-pad.bin
 endif
 
+$(obj)u-boot-img.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
+               cat $(obj)spl/u-boot-spl.bin $(obj)u-boot.img > $@
+
 ifeq ($(CONFIG_SANDBOX),y)
 GEN_UBOOT = \
                cd $(LNDIR) && $(CC) $(SYMS) -T $(obj)u-boot.lds \
@@ -542,10 +561,8 @@ GEN_UBOOT = \
                        $(PLATFORM_LIBS) -Wl,-Map -Wl,u-boot.map -o u-boot
 else
 GEN_UBOOT = \
-               UNDEF_LST=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
-               sed  -n -e 's/.*\($(SYM_PREFIX)_u_boot_list_.*\)/-u\1/p'|sort|uniq`;\
                cd $(LNDIR) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \
-                       $$UNDEF_LST $(__OBJS) \
+                       $(__OBJS) \
                        --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
                        -Map u-boot.map -o u-boot
 endif
@@ -578,11 +595,7 @@ $(SUBDIR_EXAMPLES): $(obj)u-boot
 $(LDSCRIPT):   depend
                $(MAKE) -C $(dir $@) $(notdir $@)
 
-# The following line expands into whole rule which generates u-boot.lst,
-# the file containing u-boots LG-array linker section. This is included into
-# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
-$(eval $(call make_u_boot_list, $(obj)include/u-boot.lst, $(LIBBOARD) $(LIBS)))
-$(obj)u-boot.lds: $(LDSCRIPT) $(obj)include/u-boot.lst
+$(obj)u-boot.lds: $(LDSCRIPT)
                $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$< >$@
 
 nand_spl:      $(TIMESTAMP_FILE) $(VERSION_FILE) depend
@@ -772,23 +785,6 @@ $(obj).boards.depend:      boards.cfg
 lcname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\L\1/')
 ucname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/')
 
-#########################################################################
-## ARM1176 Systems
-#########################################################################
-smdk6400_noUSB_config  \
-smdk6400_config        :       unconfig
-       @mkdir -p $(obj)include $(obj)board/samsung/smdk6400
-       @mkdir -p $(obj)nand_spl/board/samsung/smdk6400
-       @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
-       @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-       @if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then                       \
-               echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
-       else                                                                            \
-               echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
-       fi
-       @$(MKCONFIG) smdk6400 arm arm1176 smdk6400 samsung s3c64xx
-       @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-
 #########################################################################
 #########################################################################
 
@@ -818,7 +814,6 @@ clean:
               $(obj)board/matrix_vision/*/bootscript.img                 \
               $(obj)board/voiceblue/eeprom                               \
               $(obj)u-boot.lds                                           \
-              $(obj)include/u-boot.lst                                   \
               $(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs]          \
               $(obj)arch/blackfin/cpu/init.{lds,elf}
        @rm -f $(obj)include/bmp_logo.h
@@ -830,7 +825,8 @@ clean:
        @$(MAKE) -s -C doc/DocBook/ cleandocs
        @find $(OBJTREE) -type f \
                \( -name 'core' -o -name '*.bak' -o -name '*~' -o -name '*.su' \
-               -o -name '*.o'  -o -name '*.a' -o -name '*.exe' \) -print \
+               -o -name '*.o'  -o -name '*.a' -o -name '*.exe' \
+               -o -name '*.cfgtmp' \) -print \
                | xargs rm -f
 
 # Removes everything not needed for testing u-boot
@@ -847,6 +843,8 @@ clobber:    tidy
        @rm -f $(obj)u-boot.kwb
        @rm -f $(obj)u-boot.pbl
        @rm -f $(obj)u-boot.imx
+       @rm -f $(obj)u-boot-with-spl.imx
+       @rm -f $(obj)u-boot-with-nand-spl.imx
        @rm -f $(obj)u-boot.ubl
        @rm -f $(obj)u-boot.ais
        @rm -f $(obj)u-boot.dtb
@@ -855,8 +853,9 @@ clobber:    tidy
        @rm -f $(obj)nand_spl/{u-boot.{lds,lst},System.map}
        @rm -f $(obj)nand_spl/{u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map}
        @rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.map}
-       @rm -f $(obj)spl/{u-boot-spl.lds,u-boot.lst}
-       @rm -f $(obj)MLO
+       @rm -f $(obj)spl/u-boot-spl.lds
+       @rm -f $(obj)MLO MLO.byteswap
+       @rm -f $(obj)SPL
        @rm -f $(obj)tools/xway-swap-bytes
        @rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c
        @rm -f $(obj)arch/powerpc/cpu/mpc83xx/ddr-gen?.c