glsdk/glsdk-u-boot.git
2013-08-14 Mugunthan V NARM: DRA7xx: Add CPSW and MDIO pinmux support
2013-08-14 Mugunthan V NARM: DRA7xx: Add CPSW support to DRA7xx EVM
2013-08-14 Mugunthan V NARM: DRA7xx: Enable GMAC clock control
2013-08-14 Lokesh VutlaARM: DRA7xx: Lock DPLL_GMAC
2013-08-14 Mugunthan V Ndrivers: net: cpsw: Enable statistics for all port
2013-08-14 Mugunthan V Ndrivers: net: cpsw: remove hard coding bd ram for cpsw
2013-08-14 Somnath MukherjeeHACK: ARM: DRA7xx: Add Ethernet crossbar setting
2013-08-13 Minaldra7xx: Enabled UART-boot mode
2013-08-08 alaganrajarm: omap5: dra7xx: Rework bootcmd to handle two MMC... ti2013.04.02.prod.13.08.001
2013-08-08 Amarinder BindraHACK: ARM: DRA7xx: crossbar: Add support for crossbar
2013-08-08 Ravikumar Kattekolaconfigs: DRA7: include Bank Address register support
2013-08-08 Sourav PoddarREADME: qspi usecase and testing documentation.
2013-08-08 Sourav Poddardriver: spi: Add memory mapped read support
2013-08-08 Ravikumar Kattekoladrivers: mtd: qspi: Add quad read support
2013-08-08 Matt Porterdra7xx_evm: add SPL API, QSPI, and serial flash support
2013-08-08 Matt Porterspi: add TI QSPI driver
2013-08-08 Sourav Poddararmv7: hw_data: change clock divider setting.
2013-08-08 Matt Porteromap5: add qspi support
2013-08-08 Jagannadha... sf: Warn to use BAR for > 16MiB flashes
2013-08-08 Jagannadha... sf: Add debug messages on spi_flash_read_common
2013-08-08 Jagannadha... sf: Place the sf calls in proper order
2013-08-08 Jagannadha... sf: Unify spi_flash write code
2013-08-08 Jagannadha... sf: Add flag status register polling support
2013-08-08 Jagannadha... sf: Remove spi_flash_cmd_poll_bit()
2013-08-08 Jagannadha... sf: spansion: Add support for S25FL512S_64K
2013-08-08 Jagannadha... sf: Use spi_flash_addr() in write call
2013-08-08 Jagannadha... sf: Add bank addr code in CONFIG_SPI_FLASH_BAR
2013-08-08 Jagannadha... sf: Update sf read to support all sizes of flashes
2013-08-08 Jagannadha... sf: Update sf to support all sizes of flashes
2013-08-08 Jagannadha... sf: Read flash bank addr register at probe time
2013-08-08 Jagannadha... sf: Discover the bank addr commands
2013-08-08 Jagannadha... sf: Add bank address register writing support
2013-08-08 Jagannadha... sf: spansion: Correct name of S25FL128S 64K Sector...
2013-08-08 Ravikumar KattekolaDRA7: Revert QSPI v1 patchset to apply v2 with code...
2013-06-28 Sourav Poddararm: omap5: hw_data: Enable clock selectively. ti2013.04.02.prod.13.07.001
2013-06-08 Sourav Poddarboard: dra7xxx: modfiy mux data. ti2013.04.02
2013-06-08 Sourav PoddarFix offset detail and add sysboot settings
2013-06-07 Sourav PoddarREADME: qspi usecase and testing documentation.
2013-06-07 Sourav Poddardrivers: mtd: spi: Modify read/write command for sfl256...
2013-06-07 Matt Porterdra7xx_evm: add SPL API, QSPI, and serial flash support
2013-06-07 Matt Porterspi: add TI QSPI driver
2013-06-07 Matt Porteromap5: add qspi support
2013-05-29 Sricharan RARM: DRA7xx: EMIF: Change settings required for EVM...
2013-05-29 Lokesh VutlaARM: DRA7xx: clocks: Update PLL values
2013-05-29 Lokesh VutlaARM: DRA7xx: Update pinmux data
2013-05-29 Balaji T Kmmc: omap_hsmmc: add mmc1 pbias, ldo1
2013-05-29 Sricharan RARM: DRA7xx: Correct SRAM END address
2013-05-29 Sricharan RARM: DRA7xx: Correct the SYS_CLK to 20MHZ
2013-05-29 Sricharan RARM: DRA7xx: Change the Debug UART to UART1
2013-05-29 Lokesh VutlaARM: DRA7xx: Do not enable srcomp for DRA7xx Soc's
2013-05-29 Nishanth MenonARM: OMAP5: DRA7xx: support class 0 optimized voltages
2013-05-29 Lokesh VutlaARM: DRA7xx: clocks: Fixing i2c_init for PMIC
2013-05-29 Lokesh VutlaARM: DRA7xx: power Add support for tps659038 PMIC
2013-05-29 Lokesh VutlaARM: DRA7xx: Add control id code for DRA7xx
2013-05-29 Lokesh VutlaARM: OMAP4+: pmic: Make generic bus init and write...
2013-05-29 Sricharan RARM: OMAP5: clocks: Do not enable sgx clocks
2013-05-29 Lokesh VutlaARM: OMAP4+: Cleanup header files
2013-05-10 SRICHARAN RARM: OMAP: Add arch_cpu_init function
2013-05-10 SRICHARAN RARM: OMAP: Cleanup boot parameters usage
2013-05-10 SRICHARAN RARM: OMAP: Correct save_boot_params and replace with...
2013-05-10 SRICHARAN RARM: OMAP4/5: Make OMAPx_SRAM_SCRATCH_ defines common
2013-05-10 SRICHARAN RARM: OMAP: Make omap_boot_parameters common across...
2013-05-10 Tom Riniam33xx: Fix warning with CONFIG_DISPLAY_CPUINFO
2013-05-10 Eric Benarddavinci: handle CONFIG_SYS_CLE_MASK and CONFIG_SYS_ALE_MASK
2013-05-10 Eric Benardda850: provide davinci_enable_uart0
2013-05-10 Igor Grinbergcm-t35: update config file
2013-05-10 Igor GrinbergMAINTAINERS: fix the cm-t35 board name
2013-05-10 Igor Grinbergcm-t35: move cm-t35 to live in compulab directory
2013-05-10 Dan MurphyARM: Panda: Add flag to allow runtime enviroment variba...
2013-05-10 Dan MurphyARM:Panda:Fix device tree loading for the panda-es
2013-05-10 Lokesh VutlaARM: OMAP5: Fix warm reset with USB cable connected
2013-05-10 Mark JacksonRemove duplicate / unused #defines on AM335x boards
2013-05-10 Tom Riniomap5_common: Add optargs variable for kernel command...
2013-05-10 Lubomir PopovOMAP5: USB: hsusbtll_clkctrl has to be in hw_auto for...
2013-05-10 Enric Balletbo... ARM: Add support for IGEP COM AQUILA/CYGNUS
2013-05-10 Enric Balletbo... Add DDR3 support for IGEP COM AQUILA/CYGNUS.
2013-05-10 Lokesh Vutlaarm: omap: emif: Fix DDR3 init after warm reset
2013-05-10 Tom Rinibeagleboard: Update comment in get_board_rev()
2013-05-10 Lubomir PopovOMAP5: I2C: Set I2C_BUS_MAX to 5 to enable I2C4 and...
2013-05-10 Lubomir PopovOMAP5: I2C: Add I2C4 and I2C5 bases
2013-05-10 Lubomir PopovOMAP5: I2C: Enable i2c5 clocks
2013-05-10 Nishanth Menonpalmas: add header guard
2013-05-10 Nishanth Menonpalmas: use palmas_i2c_[read|write]_u8
2013-05-10 Nishanth Menonpalmas: rename twl6035_mmc1_poweron_ldo with an palmas...
2013-05-10 Nishanth Menonpalmas: rename init_settings to an generic palmas init
2013-05-10 Nishanth Menontwl6035: rename to palmas
2013-05-10 Nishanth Menontwl6030: add header guard
2013-05-10 Nishanth Menontwl6030: move twl6030 register access functions to...
2013-05-10 Nishanth Menontwl6030: twl6030_i2c_[read|write]_u8 prototype consistent
2013-05-10 Nishanth Menontwl4030: make twl4030_i2c_read_u8 prototype consistent
2013-05-10 Nishanth Menontwl4030: make twl4030_i2c_write_u8 prototype consistent
2013-05-10 Matt Porterti814x_evm: enable CPSW support
2013-05-10 Matt Porterphy: add support for ET1011C phys
2013-05-10 Matt Portercpsw: add support for TI814x slave_regs differences
2013-05-10 Matt Porteram33xx: add pll and clock support for TI814x CPSW
2013-04-30 Michal Simeki2c: zynq: Add support for Xilinx Zynq
2013-04-30 Michal Simekmmc: Add support for Xilinx Zynq sdhci controller
2013-04-30 Michal Simeknet: gem: Add support for phy autodetection
2013-04-30 David Andreynet: gem: Preserve clk on emio interface
2013-04-30 David Andreynet: gem: Pass phy address to init
next