u-boot git: sync with OE for beagleboard
authorKoen Kooi <koen@dominion.thruhere.net>
Tue, 8 Feb 2011 13:10:13 +0000 (14:10 +0100)
committerKoen Kooi <koen@dominion.thruhere.net>
Tue, 8 Feb 2011 13:10:13 +0000 (14:10 +0100)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
52 files changed:
recipes-bsp/u-boot/u-boot/0001-Enable-I2C-bus-switching.patch [moved from recipes-bsp/u-boot/u-boot/0001-OMAP3-enable-i2c-bus-switching-for-Beagle-and-Overo.patch with 85% similarity]
recipes-bsp/u-boot/u-boot/0002-OMAP3-add-board-revision-detection-for-Overo.patch
recipes-bsp/u-boot/u-boot/0003-OMAP3-update-Beagle-revision-detection-to-recognize-.patch
recipes-bsp/u-boot/u-boot/0004-OMAP3-Set-VAUX2-to-1.8V-for-EHCI-PHY-on-Beagle-Rev-C.patch
recipes-bsp/u-boot/u-boot/0005-OMAP3-add-entry-for-rev-3.1.2-check-and-display-max-.patch
recipes-bsp/u-boot/u-boot/0006-OMAP3-add-mpurate-boot-arg-for-overo-and-beagle.patch
recipes-bsp/u-boot/u-boot/0007-OMAP3-detect-expansion-board-type-version-using-eepr.patch
recipes-bsp/u-boot/u-boot/0008-OMAP3-Overo-enable-config-eeprom-to-set-u-boot-env-v.patch
recipes-bsp/u-boot/u-boot/0009-OMAP3-Overo-enable-input-on-MMC1_CLK-and-MMC3_CLK-pi.patch
recipes-bsp/u-boot/u-boot/0010-OMAP3-Overo-set-CONFIG_SYS_I2C_SPEED-to-400Khz.patch
recipes-bsp/u-boot/u-boot/0011-OMAP3-trim-excessively-long-delays-in-i2c-driver.patch
recipes-bsp/u-boot/u-boot/0012-OMAP3-Overo-allow-expansion-boards-with-any-vendor-I.patch
recipes-bsp/u-boot/u-boot/0013-OMAP3-Overo-change-address-of-expansion-eeprom-to-0x.patch
recipes-bsp/u-boot/u-boot/0014-OMAP3-board.c-don-t-attempt-to-set-up-second-RAM-ban.patch
recipes-bsp/u-boot/u-boot/0015-OMAP3-mem.c-enhance-the-RAM-test.patch
recipes-bsp/u-boot/u-boot/0016-env_nand.c-fail-gracefully-if-no-nand-is-present.patch
recipes-bsp/u-boot/u-boot/0017-OMAP3-add-definitions-to-support-sysinfo-cpu-and-cpu.patch
recipes-bsp/u-boot/u-boot/0018-OMAP3-sys_info-update-cpu-detection-for-36XX-37XX.patch
recipes-bsp/u-boot/u-boot/0019-OMAP3-clocks-update-clock-setup-for-36XX-37XX.patch
recipes-bsp/u-boot/u-boot/0020-OMAP3-beagle-add-support-for-Beagle-xM.patch
recipes-bsp/u-boot/u-boot/0021-OMAP3-Beagle-Overo-remove-omapfb.debug-y-from-defaul.patch
recipes-bsp/u-boot/u-boot/0022-OMAP3-beagle-implement-expansionboard-detection-base.patch
recipes-bsp/u-boot/u-boot/0023-beagleboard-display-message-about-I2C-errors-being-e.patch
recipes-bsp/u-boot/u-boot/0024-beagleboard-fix-TCT-expansionboard-IDs.patch
recipes-bsp/u-boot/u-boot/0025-Add-DSS-driver-for-OMAP3.patch
recipes-bsp/u-boot/u-boot/0026-Enable-DSS-driver-for-Beagle.patch
recipes-bsp/u-boot/u-boot/0027-beagleboardXM-don-t-set-mpurate-on-xM-in-bootargs.patch
recipes-bsp/u-boot/u-boot/0028-OMAP3-fix-and-clean-up-L2-cache-enable-disable-funct.patch
recipes-bsp/u-boot/u-boot/0029-OMAP3-convert-setup_auxcr-to-pure-asm.patch
recipes-bsp/u-boot/u-boot/0030-OMAP3-apply-Cortex-A8-errata-workarounds-only-on-aff.patch
recipes-bsp/u-boot/u-boot/0031-OMAP3-beagle-add-more-expansionboards-based-on-http-.patch
recipes-bsp/u-boot/u-boot/0032-OMAP3-beagle-set-mpurate-to-600-for-revB-and-revC1-3.patch
recipes-bsp/u-boot/u-boot/0033-OMAP3-beagle-prettify-expansionboard-message-a-bit.patch
recipes-bsp/u-boot/u-boot/0034-OMAP3-beagle-add-pinmux-for-Tincantools-Trainer-expa.patch
recipes-bsp/u-boot/u-boot/0035-OMAP3-Beagle-set-mpurate-to-1000-for-xM.patch
recipes-bsp/u-boot/u-boot/0036-OMAP3-Beagle-decrease-bootdelay-to-3-use-VGA-for-def.patch
recipes-bsp/u-boot/u-boot/0037-OMAP3-beagle-pass-expansionboard-name-in-bootargs.patch
recipes-bsp/u-boot/u-boot/0038-Added-configurations-for-xM-Rev-A-board.patch
recipes-bsp/u-boot/u-boot/0039-OMAP3-beagle-setenv-beaglerev-for-AxBx-Cx-xMA-for-be.patch
recipes-bsp/u-boot/u-boot/0040-OMAP-mmc-add-support-for-second-and-third-mmc-channe.patch [moved from recipes-bsp/u-boot/u-boot/0001-OMAP-mmc-add-support-for-second-and-third-mmc-chan.patch with 95% similarity]
recipes-bsp/u-boot/u-boot/0041-OMAP3-Beagle-enable-support-for-second-and-third-mmc.patch [moved from recipes-bsp/u-boot/u-boot/0001-OMAP3-Beagle-enable-support-for-second-and-third-m.patch with 81% similarity]
recipes-bsp/u-boot/u-boot/0042-BeagleBoard-Added-LED-driver.patch [moved from recipes-bsp/u-boot/u-boot/0038-BeagleBoard-Added-LED-driver.patch with 95% similarity]
recipes-bsp/u-boot/u-boot/0043-Add-led-command.patch [moved from recipes-bsp/u-boot/u-boot/0039-Add-led-command.patch with 98% similarity]
recipes-bsp/u-boot/u-boot/0044-BeagleBoard-Enabled-LEDs.patch [moved from recipes-bsp/u-boot/u-boot/0041-BeagleBoard-Enabled-LEDs.patch with 89% similarity]
recipes-bsp/u-boot/u-boot/0045-BeagleBoard-Added-userbutton-command.patch [moved from recipes-bsp/u-boot/u-boot/0042-BeagleBoard-New-command-for-status-of-USER-button.patch with 94% similarity]
recipes-bsp/u-boot/u-boot/0046-BeagleBoard-Add-CONFIG_SYS_MEMTEST_SCRATCH.patch [moved from recipes-bsp/u-boot/u-boot/0043-BeagleBoard-Add-CONFIG_SYS_MEMTEST_SCRATCH.patch with 84% similarity]
recipes-bsp/u-boot/u-boot/0047-BeagleBoard-Adjust-boot-command-on-USER-button.patch [moved from recipes-bsp/u-boot/u-boot/0044-Beagleboard-Adjust-boot.patch with 92% similarity]
recipes-bsp/u-boot/u-boot/0048-BeagleBoard-Enable-pullups-on-i2c2.patch [moved from recipes-bsp/u-boot/u-boot/0045-BeagleBoard-Enable-pullups-on-i2c2.patch with 88% similarity]
recipes-bsp/u-boot/u-boot/0049-BeagleBoard-Add-camera-to-default-bootargs.patch [moved from recipes-bsp/u-boot/u-boot/0046-BeagleBoard-Add-camera-to-default-bootargs.patch with 89% similarity]
recipes-bsp/u-boot/u-boot/0050-BeagleBoard-move-ramdisk-parameters.patch [moved from recipes-bsp/u-boot/u-boot/0001-BeagleBoard-move-ramdisk-parameters.patch with 89% similarity]
recipes-bsp/u-boot/u-boot/0051-add-support-for-beagleboardtoys-expansionboards.patch [new file with mode: 0644]
recipes-bsp/u-boot/u-boot_git.bb

similarity index 85%
rename from recipes-bsp/u-boot/u-boot/0001-OMAP3-enable-i2c-bus-switching-for-Beagle-and-Overo.patch
rename to recipes-bsp/u-boot/u-boot/0001-Enable-I2C-bus-switching.patch
index c718191ab0086478d32d45812ca1742d7bef0b6f..8a328626b9335868c85f0f5c314ee33568dcdabd 100644 (file)
@@ -1,7 +1,7 @@
-From 9c1581dd7f6057d5d25d6b2dcf8bacef95d526d2 Mon Sep 17 00:00:00 2001
+From 5b5eb18bfb80fa9595eb258a911a94f2807e7497 Mon Sep 17 00:00:00 2001
 From: Syed Mohammed Khasim <khasim@ti.com>
 Date: Mon, 18 Jan 2010 18:11:14 +0530
-Subject: [PATCH] Enable I2C bus switching
+Subject: [PATCH 01/51] Enable I2C bus switching
 
 OMAP3 supports Multiple I2C channels, this patch allows
 us to use i2c dev <bus no> command to switch between busses.
@@ -15,7 +15,7 @@ Acked-by: Heiko Schocher <hs@denx.de>
  2 files changed, 11 insertions(+), 0 deletions(-)
 
 diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c
-index f00468d..0af230d 100644
+index ff18991..e8c8184 100644
 --- a/drivers/i2c/omap24xx_i2c.c
 +++ b/drivers/i2c/omap24xx_i2c.c
 @@ -435,3 +435,8 @@ int i2c_set_bus_num(unsigned int bus)
@@ -28,10 +28,10 @@ index f00468d..0af230d 100644
 +      return (int) current_bus;
 +}
 diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index ad73a66..1a76004 100644
+index 08d79ac..d522c77 100644
 --- a/include/configs/omap3_beagle.h
 +++ b/include/configs/omap3_beagle.h
-@@ -113,6 +113,12 @@
+@@ -100,6 +100,12 @@
  /* DDR - I use Micron DDR */
  #define CONFIG_OMAP3_MICRON_DDR               1
  
@@ -45,5 +45,5 @@ index ad73a66..1a76004 100644
  #define CONFIG_MUSB_UDC                       1
  #define CONFIG_USB_OMAP3              1
 -- 
-1.6.1
+1.6.6.1
 
index 255d72574cb22f670e060e9955bb60f13037b43f..86cc3eff2291d09d8a35b93b970b59a53960f7e8 100644 (file)
@@ -1,7 +1,7 @@
-From 59c9245c9a52954c8c084e257bbe55443201614b Mon Sep 17 00:00:00 2001
+From 8cea9443be01ccc2525ff1de17b0dddd7c27984e Mon Sep 17 00:00:00 2001
 From: Steve Sakoman <steve@sakoman.com>
 Date: Wed, 10 Feb 2010 14:40:56 -0800
-Subject: [PATCH 02/37] OMAP3: add board revision detection for Overo
+Subject: [PATCH 02/51] OMAP3: add board revision detection for Overo
 
 ---
  board/overo/overo.c |   90 +++++++++++++++++++++++++++++++++++++++++++++++++++
index d12ff7a1ed527102ec1426bc1006defd8c2a3b6a..546888c2d8d30ffbc0c5a7c48ee669bf39b2b76c 100644 (file)
@@ -1,7 +1,7 @@
-From 9db5da6e8a0d6fb973b71902525ad3298faa39d9 Mon Sep 17 00:00:00 2001
+From fae6228e203436ce0d82ce32da769bd91206865f Mon Sep 17 00:00:00 2001
 From: Steve Sakoman <steve@sakoman.com>
 Date: Wed, 10 Feb 2010 14:51:48 -0800
-Subject: [PATCH 03/37] OMAP3: update Beagle revision detection to recognize C4 boards
+Subject: [PATCH 03/51] OMAP3: update Beagle revision detection to recognize C4 boards
 
 ---
  board/ti/beagle/beagle.c |   77 +++++++++++++++++++++++++++-------------------
index 549b3fbddf9bc1f0e595a701711639a1e6eb7e19..16f4888d0b970f3a019a1c7a8e55430f26d71a89 100644 (file)
@@ -1,7 +1,7 @@
-From efc587fb24a5246f5a436a057320687a1b7847c6 Mon Sep 17 00:00:00 2001
+From a1a4ba7a5fce36522a994cb06d6d76931964578c Mon Sep 17 00:00:00 2001
 From: Steve Sakoman <steve@sakoman.com>
 Date: Wed, 10 Feb 2010 15:23:19 -0800
-Subject: [PATCH 04/37] OMAP3: Set VAUX2 to 1.8V for EHCI PHY on Beagle Rev C4 boards
+Subject: [PATCH 04/51] OMAP3: Set VAUX2 to 1.8V for EHCI PHY on Beagle Rev C4 boards
 
 ---
  board/ti/beagle/beagle.c |    5 +++++
index 783fe279dc81c2710bb7686d488bcddc882ef5b0..e8f0f5fe39a1c14a0edab5612deabf272bb5f144 100644 (file)
@@ -1,7 +1,7 @@
-From 27072274450ea8de1994744782397452b99814cc Mon Sep 17 00:00:00 2001
+From 13ed8be9848adff30bcfdcbe16bce3d2c6bb02f1 Mon Sep 17 00:00:00 2001
 From: Steve Sakoman <steve@sakoman.com>
 Date: Wed, 3 Feb 2010 12:26:30 -0800
-Subject: [PATCH 05/37] OMAP3: add entry for rev 3.1.2, check and display max cpu clock for rev > 3.0
+Subject: [PATCH 05/51] OMAP3: add entry for rev 3.1.2, check and display max cpu clock for rev > 3.0
 
 ---
  cpu/arm_cortexa8/omap3/sys_info.c  |   24 ++++++++++++++++++++++--
index de3b4845b0b1baea717c48f212e8c5ed255dcd88..700c3c2de45659efb141528a5a58774df0fab394 100644 (file)
@@ -1,7 +1,7 @@
-From 1b082bb4a8ba5b7bee727baf3cd048e1785c8abd Mon Sep 17 00:00:00 2001
+From b03bad6826a2f3a0a03f6cdd5682e0a628fff851 Mon Sep 17 00:00:00 2001
 From: Steve Sakoman <steve@sakoman.com>
 Date: Wed, 3 Feb 2010 14:39:14 -0800
-Subject: [PATCH 06/37] OMAP3: add mpurate boot arg for overo and beagle
+Subject: [PATCH 06/51] OMAP3: add mpurate boot arg for overo and beagle
 
 allows one to set the omap clock rate via "setenv mpurate 720" for example
 ---
@@ -10,10 +10,10 @@ allows one to set the omap clock rate via "setenv mpurate 720" for example
  2 files changed, 6 insertions(+), 0 deletions(-)
 
 diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index 87e3dd0..ce347cd 100644
+index d522c77..35ae8af 100644
 --- a/include/configs/omap3_beagle.h
 +++ b/include/configs/omap3_beagle.h
-@@ -182,6 +182,7 @@
+@@ -187,6 +187,7 @@
        "loadaddr=0x82000000\0" \
        "usbtty=cdc_acm\0" \
        "console=ttyS2,115200n8\0" \
@@ -21,7 +21,7 @@ index 87e3dd0..ce347cd 100644
        "vram=12M\0" \
        "dvimode=1024x768MR-16@60\0" \
        "defaultdisplay=dvi\0" \
-@@ -190,6 +191,7 @@
+@@ -195,6 +196,7 @@
        "nandroot=/dev/mtdblock4 rw\0" \
        "nandrootfstype=jffs2\0" \
        "mmcargs=setenv bootargs console=${console} " \
@@ -29,7 +29,7 @@ index 87e3dd0..ce347cd 100644
                "vram=${vram} " \
                "omapfb.mode=dvi:${dvimode} " \
                "omapfb.debug=y " \
-@@ -197,6 +199,7 @@
+@@ -202,6 +204,7 @@
                "root=${mmcroot} " \
                "rootfstype=${mmcrootfstype}\0" \
        "nandargs=setenv bootargs console=${console} " \
@@ -38,10 +38,10 @@ index 87e3dd0..ce347cd 100644
                "omapfb.mode=dvi:${dvimode} " \
                "omapfb.debug=y " \
 diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
-index 0d24758..295cce6 100644
+index a43500b..113c6df 100644
 --- a/include/configs/omap3_overo.h
 +++ b/include/configs/omap3_overo.h
-@@ -152,6 +152,7 @@
+@@ -151,6 +151,7 @@
  #define CONFIG_EXTRA_ENV_SETTINGS \
        "loadaddr=0x82000000\0" \
        "console=ttyS2,115200n8\0" \
@@ -49,7 +49,7 @@ index 0d24758..295cce6 100644
        "vram=12M\0" \
        "dvimode=1024x768MR-16@60\0" \
        "defaultdisplay=dvi\0" \
-@@ -160,6 +161,7 @@
+@@ -159,6 +160,7 @@
        "nandroot=/dev/mtdblock4 rw\0" \
        "nandrootfstype=jffs2\0" \
        "mmcargs=setenv bootargs console=${console} " \
@@ -57,7 +57,7 @@ index 0d24758..295cce6 100644
                "vram=${vram} " \
                "omapfb.mode=dvi:${dvimode} " \
                "omapfb.debug=y " \
-@@ -167,6 +169,7 @@
+@@ -166,6 +168,7 @@
                "root=${mmcroot} " \
                "rootfstype=${mmcrootfstype}\0" \
        "nandargs=setenv bootargs console=${console} " \
index 13da414cd0e78c77647b30f3440e4d1f829a6cfa..d89469c56d15b66a91f317c64fb90e1bf053efcb 100644 (file)
@@ -1,7 +1,7 @@
-From 129dccd106ea5862f3ff25c368102bf656472f7f Mon Sep 17 00:00:00 2001
+From f1ad90ae5fd07257ea42aa771e16a7798cd440bb Mon Sep 17 00:00:00 2001
 From: Steve Sakoman <steve@sakoman.com>
 Date: Fri, 12 Feb 2010 12:17:48 -0800
-Subject: [PATCH 07/37] OMAP3: detect expansion board type/version using eeprom contents
+Subject: [PATCH 07/51] OMAP3: detect expansion board type/version using eeprom contents
 
 ---
  board/overo/overo.c |   92 +++++++++++++++++++++++++++++++++++++++++++++++++++
index c7aea042a72bc35436964ce4ab7ec9e4e1848b37..d2cf93045a31ad1f6ce2422aef802a31bec7734d 100644 (file)
@@ -1,7 +1,7 @@
-From 4fb2bbcae8f283c46e762aa93b25cbbd55bab8b6 Mon Sep 17 00:00:00 2001
+From 831504a9514c2cb4b1dc8c9a261fd4d1a037235f Mon Sep 17 00:00:00 2001
 From: Steve Sakoman <steve@sakoman.com>
 Date: Tue, 16 Feb 2010 09:58:01 -0800
-Subject: [PATCH 08/37] OMAP3: Overo: enable config eeprom to set u-boot env variable
+Subject: [PATCH 08/51] OMAP3: Overo: enable config eeprom to set u-boot env variable
 
 ---
  board/overo/overo.c |   21 +++++++++++++--------
index b690a6c831908a4bb7cf15bed22ed0e16afab599..b1a41574dc701cda07ee660c20e7c5df1c869085 100644 (file)
@@ -1,7 +1,7 @@
-From 0ddd7f44f04b47d16d33a6b232b288ebdb1c9992 Mon Sep 17 00:00:00 2001
+From 500787d2999e23cf185808f611af61745c2746a3 Mon Sep 17 00:00:00 2001
 From: Steve Sakoman <steve@sakoman.com>
 Date: Tue, 16 Feb 2010 10:00:45 -0800
-Subject: [PATCH 09/37] OMAP3: Overo: enable input on MMC1_CLK and MMC3_CLK pinmux
+Subject: [PATCH 09/51] OMAP3: Overo: enable input on MMC1_CLK and MMC3_CLK pinmux
 
 ---
  board/overo/overo.h |    4 ++--
index 53e12b3ee06007570222f3fd9b1ddd2847951bc5..37692a2e00e7d88ccd30281d037d5f78118d37e5 100644 (file)
@@ -1,14 +1,14 @@
-From 405a5a151c8d42f157dc48731f6e607675156774 Mon Sep 17 00:00:00 2001
+From 6ced8e0d859ea9cddbc2ec4a94a4c7394f1ee4c5 Mon Sep 17 00:00:00 2001
 From: Steve Sakoman <steve@sakoman.com>
 Date: Tue, 16 Feb 2010 10:03:14 -0800
-Subject: [PATCH 10/37] OMAP3: Overo: set CONFIG_SYS_I2C_SPEED to 400Khz
+Subject: [PATCH 10/51] OMAP3: Overo: set CONFIG_SYS_I2C_SPEED to 400Khz
 
 ---
  include/configs/omap3_overo.h |    2 +-
  1 files changed, 1 insertions(+), 1 deletions(-)
 
 diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
-index 295cce6..fdbeb67 100644
+index 113c6df..27b5476 100644
 --- a/include/configs/omap3_overo.h
 +++ b/include/configs/omap3_overo.h
 @@ -112,7 +112,7 @@
index 6a3a5d935426d7a16c257a62fa0baa9d692bd79f..b6e0545b7fbca941b5272ccead067f69ecc73190 100644 (file)
@@ -1,14 +1,14 @@
-From 991f54c9da846ab9571c256adf42d8d80d044bdc Mon Sep 17 00:00:00 2001
+From f054db5f2a8eedbeaf8c6045d0bbafde5aca3efc Mon Sep 17 00:00:00 2001
 From: Steve Sakoman <steve@sakoman.com>
 Date: Tue, 16 Feb 2010 10:04:30 -0800
-Subject: [PATCH 11/37] OMAP3:  trim excessively long delays in i2c driver
+Subject: [PATCH 11/51] OMAP3: trim excessively long delays in i2c driver
 
 ---
  drivers/i2c/omap24xx_i2c.c |    8 ++++----
  1 files changed, 4 insertions(+), 4 deletions(-)
 
 diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c
-index 30a8b4c..ba47fc4 100644
+index e8c8184..0af230d 100644
 --- a/drivers/i2c/omap24xx_i2c.c
 +++ b/drivers/i2c/omap24xx_i2c.c
 @@ -148,7 +148,7 @@ static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value)
index b554d254e32ae03dc95c3d656094f438d6b675d9..a7b97fa6c20910deaa6ea206e39fac85ad79abe8 100644 (file)
@@ -1,7 +1,7 @@
-From ad1a2c047554deae2e1608d025c4f6891cf8f116 Mon Sep 17 00:00:00 2001
+From 2c02d9b024b58bbea920d3d6c40d62b30e448f60 Mon Sep 17 00:00:00 2001
 From: Steve Sakoman <steve@sakoman.com>
 Date: Fri, 26 Feb 2010 12:40:26 -0800
-Subject: [PATCH 12/37] OMAP3: Overo: allow expansion boards with any vendor ID
+Subject: [PATCH 12/51] OMAP3: Overo: allow expansion boards with any vendor ID
 
 ---
  board/overo/overo.c |   10 +++-------
index 4bbddcbd5077c81f4bc3b3378761be0d00fb2ba3..2698c0fdba21b6dd7c23f3838534c9b01e55b7ae 100644 (file)
@@ -1,7 +1,7 @@
-From 305e2cb16f4f6e8c7f13120e6a98bb1e999c764f Mon Sep 17 00:00:00 2001
+From 90119d705d2c56254d4b27efb8e8c61e62f014c1 Mon Sep 17 00:00:00 2001
 From: Steve Sakoman <steve@sakoman.com>
 Date: Fri, 26 Feb 2010 12:42:30 -0800
-Subject: [PATCH 13/37] OMAP3: Overo: change address of expansion eeprom to 0x51 so as to not conflict with EDID address
+Subject: [PATCH 13/51] OMAP3: Overo: change address of expansion eeprom to 0x51 so as to not conflict with EDID address
 
 ---
  board/overo/overo.c |    2 +-
index 2936dffc17f37bd6a33e65c1f96f09ec2d724c0f..4e31550bd04aca4df86f28890a4d6d465c8945f2 100644 (file)
@@ -1,7 +1,7 @@
-From 63de99ce613bbfce792ee46d14b324273e6a0d29 Mon Sep 17 00:00:00 2001
+From 7f50d09f9a00b7f2a392a5b0b9f2f19a96a90c16 Mon Sep 17 00:00:00 2001
 From: Steve Sakoman <steve@sakoman.com>
 Date: Tue, 23 Mar 2010 09:04:50 -0700
-Subject: [PATCH 14/37] OMAP3: board.c: don't attempt to set up second RAM bank, assume x-load has already done this
+Subject: [PATCH 14/51] OMAP3: board.c: don't attempt to set up second RAM bank, assume x-load has already done this
 
 ---
  cpu/arm_cortexa8/omap3/board.c |   19 +++++++++----------
index ce3c3b85e68f7aff4aa736aea9ebe0f4059c30ff..d689f69fbbd7e526278c5e3b0da494c9a89b803c 100644 (file)
@@ -1,7 +1,7 @@
-From f2e3d22fb1963d08844edee45f7d7d6beba32152 Mon Sep 17 00:00:00 2001
+From 379ff04432ffdef234c2f85b1801cf7df2d3d5ee Mon Sep 17 00:00:00 2001
 From: Steve Sakoman <steve@sakoman.com>
 Date: Tue, 23 Mar 2010 09:06:49 -0700
-Subject: [PATCH 15/37] OMAP3: mem.c: enhance the RAM test
+Subject: [PATCH 15/51] OMAP3: mem.c: enhance the RAM test
 
 ---
  cpu/arm_cortexa8/omap3/mem.c |   28 +++++++++++++++-------------
index 5e83125e354bd040919a009434c2c30d069a8117..8f39aa15a76a2f96315cbe7ee972abcf6af4a000 100644 (file)
@@ -1,7 +1,7 @@
-From 794e4aa6a5aa5fbe71b08bfe8f5f5f65078fbc68 Mon Sep 17 00:00:00 2001
+From a9b4ba0446bd55d98243de2f3e3a747f8842811f Mon Sep 17 00:00:00 2001
 From: Steve Sakoman <steve@sakoman.com>
 Date: Tue, 23 Mar 2010 09:12:16 -0700
-Subject: [PATCH 16/37] env_nand.c:  fail gracefully if no nand is present
+Subject: [PATCH 16/51] env_nand.c: fail gracefully if no nand is present
 
 ---
  common/env_nand.c |    4 ++++
index ad5a2131b0649020ffd5cbccd0b4142719f97089..3c668220a515ef166cc9901c12430f6428e2bed9 100644 (file)
@@ -1,7 +1,7 @@
-From 34622e1e89b615c999480ab48ec004c16f8ca2d5 Mon Sep 17 00:00:00 2001
+From 4c1682016b61262456acb9386ef69d0da4243db9 Mon Sep 17 00:00:00 2001
 From: Steve Sakoman <steve@sakoman.com>
 Date: Tue, 23 Mar 2010 09:15:29 -0700
-Subject: [PATCH 17/37] OMAP3: add definitions to support sysinfo cpu and cpu family detection
+Subject: [PATCH 17/51] OMAP3: add definitions to support sysinfo cpu and cpu family detection
 
 ---
  include/asm-arm/arch-omap3/cpu.h   |    6 ------
index 65f606b4425b699c69aafda564e0c349a2afc9ca..5566db2d433d5c54fc9c6dfecae6b77f2adeec80 100644 (file)
@@ -1,7 +1,7 @@
-From 8480eb0272865078290146031e09eb70baed3f6e Mon Sep 17 00:00:00 2001
+From f8a42576fac8349ae8ff9d6673b229f6b3103798 Mon Sep 17 00:00:00 2001
 From: Steve Sakoman <steve@sakoman.com>
 Date: Tue, 23 Mar 2010 09:17:59 -0700
-Subject: [PATCH 18/37] OMAP3 sys_info: update cpu detection for 36XX/37XX
+Subject: [PATCH 18/51] OMAP3 sys_info: update cpu detection for 36XX/37XX
 
 ---
  cpu/arm_cortexa8/omap3/sys_info.c |  137 ++++++++++++++++++++++++++++---------
index e5dbec62fc7c95215fc1e501a92a51d17c522437..fc33fba4a044586fcffb91bff4497b40d0fb15c0 100644 (file)
@@ -1,7 +1,7 @@
-From 0bf419a0faa8c9dc73d7a84f93d7fcb89be3ea21 Mon Sep 17 00:00:00 2001
+From 276236da04d67dfad61ccab5d4700613ae8527f9 Mon Sep 17 00:00:00 2001
 From: Steve Sakoman <steve@sakoman.com>
 Date: Tue, 23 Mar 2010 09:20:56 -0700
-Subject: [PATCH 19/37] OMAP3: clocks: update clock setup for 36XX/37XX
+Subject: [PATCH 19/51] OMAP3: clocks: update clock setup for 36XX/37XX
 
 ---
  cpu/arm_cortexa8/omap3/clock.c            |  559 +++++++++++++++++++++--------
@@ -675,7 +675,7 @@ index 6330c9e..538a183 100644
  }
 +
 diff --git a/cpu/arm_cortexa8/omap3/lowlevel_init.S b/cpu/arm_cortexa8/omap3/lowlevel_init.S
-index 73063ec..2045e4e 100644
+index 73063ec..061d75f 100644
 --- a/cpu/arm_cortexa8/omap3/lowlevel_init.S
 +++ b/cpu/arm_cortexa8/omap3/lowlevel_init.S
 @@ -359,3 +359,72 @@ per_dpll_param:
index e6ae0dc748ff4b4479bd0bd7022560446e5f1500..abe4655c9a82e68cd4cc148fd87d94deeb6f9750 100644 (file)
@@ -1,7 +1,7 @@
-From 27c6c30dbb5de0c0ed30ceaf69bb0e9f12149c03 Mon Sep 17 00:00:00 2001
+From 8a8738a7d042a80ddef68a9683d7dda77bed8765 Mon Sep 17 00:00:00 2001
 From: Steve Sakoman <steve@sakoman.com>
 Date: Tue, 23 Mar 2010 09:21:49 -0700
-Subject: [PATCH 20/37] OMAP3: beagle: add support for Beagle xM
+Subject: [PATCH 20/51] OMAP3: beagle: add support for Beagle xM
 
 ---
  board/ti/beagle/beagle.c       |   23 +++++++++++++++--------
@@ -121,10 +121,10 @@ index d95fd78..fd06d46 100644
 +
  #endif
 diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index ce347cd..bba36df 100644
+index 35ae8af..1370a29 100644
 --- a/include/configs/omap3_beagle.h
 +++ b/include/configs/omap3_beagle.h
-@@ -157,6 +157,7 @@
+@@ -162,6 +162,7 @@
  /*
   * Board NAND Info.
   */
index 01aedc8760e998f6c14d9cd6c3aeba946779a0ad..82789939511ecc748328056734f39ebd8d707c8c 100644 (file)
@@ -1,7 +1,7 @@
-From e26b222adeea78777a89e9b0d0aefed67cde7d55 Mon Sep 17 00:00:00 2001
+From 0fd26c84173c9a589c6cd9c0db6d2200e769134b Mon Sep 17 00:00:00 2001
 From: Steve Sakoman <steve@sakoman.com>
 Date: Thu, 25 Mar 2010 06:54:47 -0700
-Subject: [PATCH 21/37] OMAP3: Beagle, Overo: remove omapfb.debug=y from default env
+Subject: [PATCH 21/51] OMAP3: Beagle, Overo: remove omapfb.debug=y from default env
 
 ---
  include/configs/omap3_beagle.h |    2 --
@@ -9,10 +9,10 @@ Subject: [PATCH 21/37] OMAP3: Beagle, Overo: remove omapfb.debug=y from default
  2 files changed, 0 insertions(+), 4 deletions(-)
 
 diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index bba36df..c156cea 100644
+index 1370a29..8bedf7d 100644
 --- a/include/configs/omap3_beagle.h
 +++ b/include/configs/omap3_beagle.h
-@@ -195,7 +195,6 @@
+@@ -200,7 +200,6 @@
                "mpurate=${mpurate} " \
                "vram=${vram} " \
                "omapfb.mode=dvi:${dvimode} " \
@@ -20,7 +20,7 @@ index bba36df..c156cea 100644
                "omapdss.def_disp=${defaultdisplay} " \
                "root=${mmcroot} " \
                "rootfstype=${mmcrootfstype}\0" \
-@@ -203,7 +202,6 @@
+@@ -208,7 +207,6 @@
                "mpurate=${mpurate} " \
                "vram=${vram} " \
                "omapfb.mode=dvi:${dvimode} " \
@@ -29,10 +29,10 @@ index bba36df..c156cea 100644
                "root=${nandroot} " \
                "rootfstype=${nandrootfstype}\0" \
 diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
-index fdbeb67..418e2ea 100644
+index 27b5476..118e886 100644
 --- a/include/configs/omap3_overo.h
 +++ b/include/configs/omap3_overo.h
-@@ -164,7 +164,6 @@
+@@ -163,7 +163,6 @@
                "mpurate=${mpurate} " \
                "vram=${vram} " \
                "omapfb.mode=dvi:${dvimode} " \
@@ -40,7 +40,7 @@ index fdbeb67..418e2ea 100644
                "omapdss.def_disp=${defaultdisplay} " \
                "root=${mmcroot} " \
                "rootfstype=${mmcrootfstype}\0" \
-@@ -172,7 +171,6 @@
+@@ -171,7 +170,6 @@
                "mpurate=${mpurate} " \
                "vram=${vram} " \
                "omapfb.mode=dvi:${dvimode} " \
index 91d09abea9218883ab69eec85bb001e4063293bd..c301c7790c7fea61161877f16195b1ac31f1e6c2 100644 (file)
@@ -1,7 +1,7 @@
-From 851d35fab7f93400a1d714524b5e986206d9b0c4 Mon Sep 17 00:00:00 2001
+From b48754f4c77924a9351867e17e2f09fbe5a83b82 Mon Sep 17 00:00:00 2001
 From: Koen Kooi <koen@dominion.thruhere.net>
 Date: Thu, 25 Mar 2010 16:07:23 +0100
-Subject: [PATCH 22/37] OMAP3: beagle: implement expansionboard detection based on board/overo.c code
+Subject: [PATCH 22/51] OMAP3: beagle: implement expansionboard detection based on board/overo.c code
 
 ---
  board/ti/beagle/beagle.c |   78 ++++++++++++++++++++++++++++++++++++++++++++++
index d7ac71317d6d3a7bd7d6eef92f1bbeb13b151a1c..498a5ac09c025df19123b839742b30fa6126990c 100644 (file)
@@ -1,7 +1,7 @@
-From 4b07f3a9f045453e5e7b5950e721ed35d9bd308a Mon Sep 17 00:00:00 2001
+From 653c13d956b189c05e6c02077dbd85cba8ff490b Mon Sep 17 00:00:00 2001
 From: Koen Kooi <koen@dominion.thruhere.net>
 Date: Wed, 31 Mar 2010 14:24:25 +0200
-Subject: [PATCH 23/37] beagleboard: display message about I2C errors being expected when no expansion boards are present
+Subject: [PATCH 23/51] beagleboard: display message about I2C errors being expected when no expansion boards are present
 
 ---
  board/ti/beagle/beagle.c |    3 +++
index dc5e69a23e30f3521dfdaa2d05121ddb4891304d..ada474dd57c9a426fa99bf33a1476ed1cef7b126 100644 (file)
@@ -1,7 +1,7 @@
-From a4fa85edf5ff6aa6a06f437acc8694dd866f6618 Mon Sep 17 00:00:00 2001
+From a0f21f7418dfa81a40bf99b7e926153a310ba457 Mon Sep 17 00:00:00 2001
 From: Koen Kooi <koen@dominion.thruhere.net>
 Date: Sun, 11 Apr 2010 12:14:43 +0200
-Subject: [PATCH 24/37] beagleboard: fix TCT expansionboard IDs
+Subject: [PATCH 24/51] beagleboard: fix TCT expansionboard IDs
 
 ---
  board/ti/beagle/beagle.c |    4 ++--
index da517b254fb12e8dade073425bfb66a66a40ac02..6a0baea79b7aff04fa5a4ca5e8b68aafa2266763 100644 (file)
@@ -1,7 +1,7 @@
-From 10bffe78f0ef6cb450ecea717dce8d636982bc86 Mon Sep 17 00:00:00 2001
+From afa9025604773b90831cb93a5c80db8d2b8eed4b Mon Sep 17 00:00:00 2001
 From: Syed Mohammed Khasim <khasim@ti.com>
 Date: Tue, 12 Jan 2010 23:57:28 +0530
-Subject: [PATCH 25/37] Add DSS driver for OMAP3
+Subject: [PATCH 25/51] Add DSS driver for OMAP3
 
 Supports dynamic panel configuration
 Supports dynamic tv standard selection
index 7e7bea83dfdb8d0f2b92ad91460e16a2b1c56bb8..415e718b85dc664ebba740eabe3c4ec51db4d482 100644 (file)
@@ -1,7 +1,7 @@
-From a8adb8e29aba9d2c83731839063f1381fce3906c Mon Sep 17 00:00:00 2001
+From 89a879905e59c837626b6a9425bcc27b097e02ad Mon Sep 17 00:00:00 2001
 From: Syed Mohammed Khasim <khasim@ti.com>
 Date: Sun, 11 Apr 2010 17:44:39 +0200
-Subject: [PATCH 26/37] Enable DSS driver for Beagle
+Subject: [PATCH 26/51] Enable DSS driver for Beagle
 
 Configures DSS to display color bar on Svideo
 Configures DSS to display background color on DVID
@@ -142,10 +142,10 @@ index ec4f831..69f9398 100644
 +
  #endif
 diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index c156cea..7bcbe9b 100644
+index 8bedf7d..52d727a 100644
 --- a/include/configs/omap3_beagle.h
 +++ b/include/configs/omap3_beagle.h
-@@ -131,6 +131,7 @@
+@@ -137,6 +137,7 @@
  #define CONFIG_CMD_I2C                /* I2C serial bus support       */
  #define CONFIG_CMD_MMC                /* MMC support                  */
  #define CONFIG_CMD_NAND               /* NAND support                 */
index 90d71a8a5f0898882ef593ec1e3595cea94a09f8..c0255038145fb1ab172c745586c5a638fb301275 100644 (file)
@@ -1,7 +1,7 @@
-From 85d4ffbc3a12b28cae00fc88d4adba7df4907fe4 Mon Sep 17 00:00:00 2001
+From 4aca3c70a18da58e263b08e37b288a06b2b6655c Mon Sep 17 00:00:00 2001
 From: Koen Kooi <koen@dominion.thruhere.net>
 Date: Tue, 13 Apr 2010 22:04:07 +0200
-Subject: [PATCH 27/37] beagleboardXM: don't set mpurate on xM in bootargs
+Subject: [PATCH 27/51] beagleboardXM: don't set mpurate on xM in bootargs
 
 ---
  board/ti/beagle/beagle.c |    1 -
index d2c6abba755500d05cf70323ab76df19ad355725..5d6a5bf6982a38c236114766c3621af9cc9714d0 100644 (file)
@@ -1,7 +1,7 @@
-From c18bda32fdb048ea38b7ff579f365ea8858053d7 Mon Sep 17 00:00:00 2001
+From 72e1ab470e483c91ab3aa38bec31faf3dad52735 Mon Sep 17 00:00:00 2001
 From: Mans Rullgard <mans@mansr.com>
 Date: Wed, 14 Apr 2010 12:08:00 +0100
-Subject: [PATCH 28/37] OMAP3: fix and clean up L2 cache enable/disable functions
+Subject: [PATCH 28/51] OMAP3: fix and clean up L2 cache enable/disable functions
 
 On OMAP34xx ES1.0, the L2 enable bit can only be set in secure mode,
 so an SMC call to the ROM monitor is required.  On later versions,
index e1ffdca727c7f36d73b786c41e4fcf2b1231912e..a60aae4656e64929f12453e60fab726ee6a914b0 100644 (file)
@@ -1,7 +1,7 @@
-From 6ddb5d4e28801907af7be39e47d502fd5c8e73e1 Mon Sep 17 00:00:00 2001
+From 1e795a2c3e44002c3512222dd3da07ac3ea42d7d Mon Sep 17 00:00:00 2001
 From: Mans Rullgard <mans@mansr.com>
 Date: Wed, 14 Apr 2010 16:49:57 +0100
-Subject: [PATCH 29/37] OMAP3: convert setup_auxcr() to pure asm
+Subject: [PATCH 29/51] OMAP3: convert setup_auxcr() to pure asm
 
 This function consists entirely of inline asm statements, so writing
 it directly in a .S file is simpler. Additionally, the inline asm is
index af669ec07efc27abb4fc1f50122ec6a627091dc6..24f292c633434fc1084a62cc9d7e1c70ed82d5d6 100644 (file)
@@ -1,7 +1,7 @@
-From 4e7bc59affc2a71de40259330e27e62181993968 Mon Sep 17 00:00:00 2001
+From fd092c7f2286fab34cf42c6c56360ae7794dbc7f Mon Sep 17 00:00:00 2001
 From: Mans Rullgard <mans@mansr.com>
 Date: Wed, 14 Apr 2010 17:10:28 +0100
-Subject: [PATCH 30/37] OMAP3: apply Cortex-A8 errata workarounds only on affected revisions
+Subject: [PATCH 30/51] OMAP3: apply Cortex-A8 errata workarounds only on affected revisions
 
 The workarounds for errata 621766 and 725233 should only be applied
 on affected Cortex-A8 revisions.  Recent chips use r3px cores where
index 9ea19123fc803b3d62f1af355a935b7aeff4b80e..b713ded47b4b5a68c20693a6bcbff0e9a7e69820 100644 (file)
@@ -1,7 +1,7 @@
-From bbfb38ccd1e2bb19a1eb698bd37cd1ab50c87b37 Mon Sep 17 00:00:00 2001
+From ccbe10687806b6504c87bd3ad80bd406bc6263f4 Mon Sep 17 00:00:00 2001
 From: Koen Kooi <koen@dominion.thruhere.net>
 Date: Fri, 23 Apr 2010 10:50:43 +0200
-Subject: [PATCH 31/37] OMAP3: beagle: add more expansionboards, based on http://www.elinux.org/BeagleBoardPinMux#Vendor_and_Device_IDs
+Subject: [PATCH 31/51] OMAP3: beagle: add more expansionboards, based on http://www.elinux.org/BeagleBoardPinMux#Vendor_and_Device_IDs
 
 ---
  board/ti/beagle/beagle.c |    8 ++++++++
index c99d3d982e45efac83f6473d787bff4ffbd1c7ed..b351344389fe23b63f3934a96942134d9d6f7152 100644 (file)
@@ -1,7 +1,7 @@
-From ae05ca488390671516bd4ed021eb43901fee740f Mon Sep 17 00:00:00 2001
+From 0d2821af767b7cfe1a5d868a14f8a18e01070e37 Mon Sep 17 00:00:00 2001
 From: Koen Kooi <koen@dominion.thruhere.net>
 Date: Tue, 27 Apr 2010 13:44:16 +0200
-Subject: [PATCH 32/37] OMAP3: beagle: set mpurate to 600 for revB and revC1-3
+Subject: [PATCH 32/51] OMAP3: beagle: set mpurate to 600 for revB and revC1-3
 
 ---
  board/ti/beagle/beagle.c |    2 ++
index a7b2c0172d4b67d60aece1be39a7d740166323b4..27a3fd1a2746d6775e73c5d109d901acac1a4d47 100644 (file)
@@ -1,7 +1,7 @@
-From caf18bc716d77d7bf2c75bc58ffbcbf09ae79f2b Mon Sep 17 00:00:00 2001
+From f4f92e1f72e2bcab85f205c66f0725a677e192e2 Mon Sep 17 00:00:00 2001
 From: Koen Kooi <koen@dominion.thruhere.net>
 Date: Tue, 27 Apr 2010 13:45:28 +0200
-Subject: [PATCH 33/37] OMAP3: beagle: prettify expansionboard message a bit
+Subject: [PATCH 33/51] OMAP3: beagle: prettify expansionboard message a bit
 
 ---
  board/ti/beagle/beagle.c |    2 +-
index 5caa6f0f1f502046a84d7f3eeb2698f86e1198d9..fb0277b015dd86c9855fa8254971ab84196d4f00 100644 (file)
@@ -1,7 +1,7 @@
-From 8580a3eafe3351e3c0f1ca3d0bc959bbeec40e28 Mon Sep 17 00:00:00 2001
+From d6d6f29e339b5d014f91870b35985a372dd330f2 Mon Sep 17 00:00:00 2001
 From: Koen Kooi <koen@dominion.thruhere.net>
 Date: Tue, 27 Apr 2010 18:25:57 +0200
-Subject: [PATCH 34/37] OMAP3: beagle: add pinmux for Tincantools Trainer expansionboard
+Subject: [PATCH 34/51] OMAP3: beagle: add pinmux for Tincantools Trainer expansionboard
 
 ---
  board/ti/beagle/beagle.c |    2 ++
index 5c02fcb6c1dcae0836a76482ff0b5770d5176b4c..c4ed87c00d1449322834219b513ea424a3d632ee 100644 (file)
@@ -1,7 +1,7 @@
-From c45e93aef4d54b262f0d8e1ecf6b111f5e1c2a4c Mon Sep 17 00:00:00 2001
+From 442e5d80723e2772f38fe473d32287200d802907 Mon Sep 17 00:00:00 2001
 From: Koen Kooi <koen@dominion.thruhere.net>
 Date: Fri, 30 Apr 2010 13:25:41 +0200
-Subject: [PATCH 35/37] OMAP3: Beagle: set mpurate to 1000 for xM
+Subject: [PATCH 35/51] OMAP3: Beagle: set mpurate to 1000 for xM
 
 ---
  board/ti/beagle/beagle.c |    1 +
index 5f89f1ae42de66ca3475d74676362dca4e79cda1..8cfdfc0e936e99c1525651f2383b0b5850532543 100644 (file)
@@ -1,17 +1,17 @@
-From 39f15722db5595411ec085e36b7fd7657415a554 Mon Sep 17 00:00:00 2001
+From 13b74d6ec2b88620515d0060f6276f744f058e44 Mon Sep 17 00:00:00 2001
 From: Koen Kooi <koen@dominion.thruhere.net>
 Date: Fri, 30 Apr 2010 13:26:01 +0200
-Subject: [PATCH 36/37] OMAP3: Beagle: decrease bootdelay to 3, use VGA for default resolution
+Subject: [PATCH 36/51] OMAP3: Beagle: decrease bootdelay to 3, use VGA for default resolution
 
 ---
  include/configs/omap3_beagle.h |    4 ++--
  1 files changed, 2 insertions(+), 2 deletions(-)
 
 diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index 7bcbe9b..93a6a5a 100644
+index 52d727a..47bc971 100644
 --- a/include/configs/omap3_beagle.h
 +++ b/include/configs/omap3_beagle.h
-@@ -178,7 +178,7 @@
+@@ -183,7 +183,7 @@
                                                        /* partition */
  
  /* Environment information */
@@ -20,7 +20,7 @@ index 7bcbe9b..93a6a5a 100644
  
  #define CONFIG_EXTRA_ENV_SETTINGS \
        "loadaddr=0x82000000\0" \
-@@ -186,7 +186,7 @@
+@@ -191,7 +191,7 @@
        "console=ttyS2,115200n8\0" \
        "mpurate=500\0" \
        "vram=12M\0" \
index 2ee844b9ff09968bb355220fe50226f7323e9814..59412b37197135fee3788cf65447534e4395acfa 100644 (file)
@@ -1,7 +1,7 @@
-From 8ad472139f7b8b7c59c0192f3e2f50a20beadf59 Mon Sep 17 00:00:00 2001
+From 02dba49bdab65e1a96fd4593f5847b38252b66e0 Mon Sep 17 00:00:00 2001
 From: Koen Kooi <koen@dominion.thruhere.net>
 Date: Mon, 3 May 2010 10:17:41 +0200
-Subject: [PATCH 37/37] OMAP3: beagle: pass expansionboard name in bootargs
+Subject: [PATCH 37/51] OMAP3: beagle: pass expansionboard name in bootargs
 
 This makes it possible to do in-kernel fixups for expansionboards like reclaiming GPIOs
 ---
@@ -55,10 +55,10 @@ index 9300984..556e995 100644
  
        if (expansion_config.content == 1)
 diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index 93a6a5a..affabf1 100644
+index 47bc971..8ad52aa 100644
 --- a/include/configs/omap3_beagle.h
 +++ b/include/configs/omap3_beagle.h
-@@ -185,6 +185,7 @@
+@@ -190,6 +190,7 @@
        "usbtty=cdc_acm\0" \
        "console=ttyS2,115200n8\0" \
        "mpurate=500\0" \
@@ -66,7 +66,7 @@ index 93a6a5a..affabf1 100644
        "vram=12M\0" \
        "dvimode=640x480MR-16@60\0" \
        "defaultdisplay=dvi\0" \
-@@ -194,6 +195,7 @@
+@@ -199,6 +200,7 @@
        "nandrootfstype=jffs2\0" \
        "mmcargs=setenv bootargs console=${console} " \
                "mpurate=${mpurate} " \
@@ -74,7 +74,7 @@ index 93a6a5a..affabf1 100644
                "vram=${vram} " \
                "omapfb.mode=dvi:${dvimode} " \
                "omapdss.def_disp=${defaultdisplay} " \
-@@ -201,6 +203,7 @@
+@@ -206,6 +208,7 @@
                "rootfstype=${mmcrootfstype}\0" \
        "nandargs=setenv bootargs console=${console} " \
                "mpurate=${mpurate} " \
index 4cfcfe15b11fd95ae318afffba6196948308c58f..bb51b8b77d2dc48e574304624c2b1d3a3638a7be 100644 (file)
@@ -1,7 +1,7 @@
-From 9a5d5518c3d3844cc49cf2d9ef5aeabca1e87c30 Mon Sep 17 00:00:00 2001
+From 94462a5c200adbad2c4fc47d7fc0ca24aeb14a2a Mon Sep 17 00:00:00 2001
 From: Jason Kridner <jkridner@beagleboard.org>
 Date: Wed, 5 May 2010 14:53:49 -0500
-Subject: [PATCH 38/38] Added configurations for xM Rev A board
+Subject: [PATCH 38/51] Added configurations for xM Rev A board
 
 This defaults to "on" condition for USB and DVI.  May want to revise for
 power savings.
index 9b64327d3acc010664eb7f90341cf14ec641d18f..799afccbeb2dddc10666b5521a1f9bb44a51ddc0 100644 (file)
@@ -1,7 +1,7 @@
-From c48581ecc0b060e4c1b5fa973d053e81e18f676b Mon Sep 17 00:00:00 2001
+From 4b5bb4a7656dc1c4a1b985b6f5454c58ad060112 Mon Sep 17 00:00:00 2001
 From: Koen Kooi <koen@dominion.thruhere.net>
 Date: Thu, 3 Jun 2010 19:50:57 +0200
-Subject: [PATCH 39/39] OMAP3: beagle: setenv beaglerev for AxBx/Cx/xMA for better bootscripts
+Subject: [PATCH 39/51] OMAP3: beagle: setenv beaglerev for AxBx/Cx/xMA for better bootscripts
 
 ---
  board/ti/beagle/beagle.c |    4 ++++
similarity index 95%
rename from recipes-bsp/u-boot/u-boot/0001-OMAP-mmc-add-support-for-second-and-third-mmc-chan.patch
rename to recipes-bsp/u-boot/u-boot/0040-OMAP-mmc-add-support-for-second-and-third-mmc-channe.patch
index 2bda1bcdc307b58d7b95b9aeb8c54668105764a0..68f39f0ef519c450fb8c7bef9ac244f8091a06cc 100644 (file)
@@ -1,7 +1,7 @@
-From 7252b81ec10aea48672f66e33cb6962b98fb0782 Mon Sep 17 00:00:00 2001
+From 0dd14c6a6f40cb47fd8517e9e9d48f0a119e9aa9 Mon Sep 17 00:00:00 2001
 From: Steve Sakoman <steve@sakoman.com>
 Date: Thu, 29 Apr 2010 10:28:14 -0700
-Subject: [PATCH] OMAP: mmc: add support for second and third mmc channels
+Subject: [PATCH 40/51] OMAP: mmc: add support for second and third mmc channels
 
 Boards wishing to use this feature should define CONFIG_SYS_MMC_SET_DEV
 
@@ -122,5 +122,5 @@ index aa751c9..43dd705 100644
  typedef struct hsmmc {
        unsigned char res1[0x10];
 -- 
-1.5.6.4
+1.6.6.1
 
similarity index 81%
rename from recipes-bsp/u-boot/u-boot/0001-OMAP3-Beagle-enable-support-for-second-and-third-m.patch
rename to recipes-bsp/u-boot/u-boot/0041-OMAP3-Beagle-enable-support-for-second-and-third-mmc.patch
index 21f1f13e35f9651387c1be740343af59c8475932..048962f8051d938a72d9c2d24c17a8e727cf5e4e 100644 (file)
@@ -1,16 +1,15 @@
-From 629a01965677e680ffa1fe76579ace7f69dd45b9 Mon Sep 17 00:00:00 2001
+From 8da9e2bac6daf2d61d7ca9d689790fc9ce5de9cb Mon Sep 17 00:00:00 2001
 From: Steve Sakoman <steve@sakoman.com>
 Date: Fri, 7 May 2010 07:40:26 -0700
-Subject: [PATCH] OMAP3: Beagle: enable support for second and third mmc channels
+Subject: [PATCH 41/51] OMAP3: Beagle: enable support for second and third mmc channels
 
 Based on 629a01965677e680ffa1fe76579ace7f69dd45b9, but removed BOOTDELAY change.
-
 ---
- include/configs/omap3_beagle.h |   8 +++++---
+ include/configs/omap3_beagle.h |    8 +++++---
  1 files changed, 5 insertions(+), 3 deletions(-)
 
 diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index f2d0f53..74d4159 100644
+index 8ad52aa..e4c88f2 100644
 --- a/include/configs/omap3_beagle.h
 +++ b/include/configs/omap3_beagle.h
 @@ -95,6 +95,7 @@
@@ -21,15 +20,15 @@ index f2d0f53..74d4159 100644
  #define CONFIG_DOS_PARTITION          1
  
  /* DDR - I use Micron DDR */
-@@ -186,6 +187,7 @@
+@@ -194,6 +195,7 @@
        "vram=12M\0" \
-       "dvimode=1024x768MR-16@60\0" \
+       "dvimode=640x480MR-16@60\0" \
        "defaultdisplay=dvi\0" \
 +      "mmcdev=1\0" \
        "mmcroot=/dev/mmcblk0p2 rw\0" \
        "mmcrootfstype=ext3 rootwait\0" \
        "nandroot=/dev/mtdblock4 rw\0" \
-@@ -204,10 +206,10 @@
+@@ -214,10 +216,10 @@
                "omapdss.def_disp=${defaultdisplay} " \
                "root=${nandroot} " \
                "rootfstype=${nandrootfstype}\0" \
@@ -42,7 +41,7 @@ index f2d0f53..74d4159 100644
        "mmcboot=echo Booting from mmc ...; " \
                "run mmcargs; " \
                "bootm ${loadaddr}\0" \
-@@ -217,7 +219,7 @@
+@@ -227,7 +229,7 @@
                "bootm ${loadaddr}\0" \
  
  #define CONFIG_BOOTCOMMAND \
@@ -52,5 +51,5 @@ index f2d0f53..74d4159 100644
                        "run bootscript; " \
                "else " \
 -- 
-1.5.6.4
+1.6.6.1
 
similarity index 95%
rename from recipes-bsp/u-boot/u-boot/0038-BeagleBoard-Added-LED-driver.patch
rename to recipes-bsp/u-boot/u-boot/0042-BeagleBoard-Added-LED-driver.patch
index 74ee4e31693df656d317131caa53c200916b932f..cbe0ce1dc2d17ae6a2a36bd937d69e0e3309dc9d 100644 (file)
@@ -1,7 +1,7 @@
-From 157b125b905b6dc69164d3f43eeb5e40d3744648 Mon Sep 17 00:00:00 2001
+From bb88a9c0ffa5b6006d689635028177be4ce83104 Mon Sep 17 00:00:00 2001
 From: Jason Kridner <jkridner@beagleboard.org>
 Date: Thu, 20 May 2010 06:14:01 -0500
-Subject: [PATCH] BeagleBoard: Added LED driver
+Subject: [PATCH 42/51] BeagleBoard: Added LED driver
 
 Added LED driver using status_led.  USR0 is set to monitor the boot
 status.  USR1 is set to be the green LED.
@@ -33,7 +33,7 @@ index f797112..4cc675c 100644
  OBJS  := $(addprefix $(obj),$(COBJS))
  
 diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
-index 556e995..d21b9c8 100644
+index cdba3dd..a6a4961 100644
 --- a/board/ti/beagle/beagle.c
 +++ b/board/ti/beagle/beagle.c
 @@ -30,6 +30,9 @@
@@ -57,7 +57,7 @@ index 556e995..d21b9c8 100644
        return 0;
  }
  
-@@ -278,3 +285,4 @@ void set_muxconf_regs(void)
+@@ -282,3 +289,4 @@ void set_muxconf_regs(void)
  {
        MUX_BEAGLE();
  }
@@ -160,5 +160,5 @@ index 0000000..df26552
 +}
 +
 -- 
-1.5.6.4
+1.6.6.1
 
similarity index 98%
rename from recipes-bsp/u-boot/u-boot/0039-Add-led-command.patch
rename to recipes-bsp/u-boot/u-boot/0043-Add-led-command.patch
index 6adbe2f7b1aa167aca45a1c494d84bbea50d923b..bd5a5e21b92cdf49bb2d36970475954142ba1031 100644 (file)
@@ -1,7 +1,7 @@
-From 609524ecd54526b3f3c7d52cc43a3c9795970f6b Mon Sep 17 00:00:00 2001
+From 1fc5c28bc260c72b4f9cefdf55bfd10504916457 Mon Sep 17 00:00:00 2001
 From: Jason Kridner <jkridner@beagleboard.org>
 Date: Thu, 20 May 2010 05:41:26 -0500
-Subject: [PATCH] Add 'led' command
+Subject: [PATCH 43/51] Add 'led' command
 
 This patch allows any board implementing the coloured LED API
 to control the LEDs from the console.
@@ -252,5 +252,5 @@ index 0000000..3b7b534
 +);
 +
 -- 
-1.5.6.4
+1.6.6.1
 
similarity index 89%
rename from recipes-bsp/u-boot/u-boot/0041-BeagleBoard-Enabled-LEDs.patch
rename to recipes-bsp/u-boot/u-boot/0044-BeagleBoard-Enabled-LEDs.patch
index 8b04619376c47430ad8853ecc7b59120e8da4bee..0142c85da7299ef316e4974be501b8d69ed1690f 100644 (file)
@@ -1,7 +1,7 @@
-From 9d3e56ba351348b6329c488a981d3e2d8f848164 Mon Sep 17 00:00:00 2001
+From 40049e97a5a97d597f8754ff1b39d931053eb465 Mon Sep 17 00:00:00 2001
 From: Jason Kridner <jkridner@beagleboard.org>
 Date: Wed, 19 May 2010 05:14:43 -0500
-Subject: [PATCH] BeagleBoard: Enabled LEDs
+Subject: [PATCH 44/51] BeagleBoard: Enabled LEDs
 
 Added LED driver using status_led.  USR0 is set to monitor the boot
 status.  USR1 is set to be the GREEN LED.
@@ -12,7 +12,7 @@ Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
  1 files changed, 13 insertions(+), 0 deletions(-)
 
 diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index c2fc6ba..eaa8779 100644
+index e4c88f2..053f5df 100644
 --- a/include/configs/omap3_beagle.h
 +++ b/include/configs/omap3_beagle.h
 @@ -98,6 +98,18 @@
@@ -34,7 +34,7 @@ index c2fc6ba..eaa8779 100644
  /* DDR - I use Micron DDR */
  #define CONFIG_OMAP3_MICRON_DDR               1
  
-@@ -132,6 +144,7 @@
+@@ -138,6 +150,7 @@
  #define CONFIG_CMD_I2C                /* I2C serial bus support       */
  #define CONFIG_CMD_MMC                /* MMC support                  */
  #define CONFIG_CMD_NAND               /* NAND support                 */
@@ -43,5 +43,5 @@ index c2fc6ba..eaa8779 100644
  
  #undef CONFIG_CMD_FLASH               /* flinfo, erase, protect       */
 -- 
-1.5.6.4
+1.6.6.1
 
similarity index 94%
rename from recipes-bsp/u-boot/u-boot/0042-BeagleBoard-New-command-for-status-of-USER-button.patch
rename to recipes-bsp/u-boot/u-boot/0045-BeagleBoard-Added-userbutton-command.patch
index 9a704a805bc8d61272b5a164f2d5bccb1496dfe9..993d40c5ed5278b1b7173a800db48afae8cf2b03 100644 (file)
@@ -1,7 +1,7 @@
-From c053723cc5a73781a4954e6c93d280436623e3d6 Mon Sep 17 00:00:00 2001
+From f5146ac9d3af9c9cd4f4bc940c343d3ef75ac6f0 Mon Sep 17 00:00:00 2001
 From: Jason Kridner <jkridner@beagleboard.org>
 Date: Wed, 21 Jul 2010 07:41:25 -0500
-Subject: [PATCH] BeagleBoard: Added userbutton command
+Subject: [PATCH 45/51] BeagleBoard: Added userbutton command
 
 Based on commit f1099c7c43caf5bac3bf6a65aa266fade4747072
     Author: Greg Turner <gregturner@ti.com>
@@ -93,5 +93,5 @@ index a6a4961..66df719 100644
 +);
 +
 -- 
-1.6.1
+1.6.6.1
 
similarity index 84%
rename from recipes-bsp/u-boot/u-boot/0043-BeagleBoard-Add-CONFIG_SYS_MEMTEST_SCRATCH.patch
rename to recipes-bsp/u-boot/u-boot/0046-BeagleBoard-Add-CONFIG_SYS_MEMTEST_SCRATCH.patch
index fa6bb48e19de75b8fa1f7261dd5b0037f0c61e35..a34f6bfe7441bcd01ea2c0a68243adb4d3048731 100644 (file)
@@ -1,7 +1,7 @@
-From d912a6d2d546faf55d07e91816b47096879137cc Mon Sep 17 00:00:00 2001
+From 631cd4e4a02faa5726c058626390bee97188f456 Mon Sep 17 00:00:00 2001
 From: Steven Kipisz <s-kipisz2@ti.com>
 Date: Fri, 4 Jun 2010 10:31:04 -0500
-Subject: [PATCH] BeagleBoard: Add CONFIG_SYS_MEMTEST_SCRATCH
+Subject: [PATCH 46/51] BeagleBoard: Add CONFIG_SYS_MEMTEST_SCRATCH
 
 Add CONFIG_SYS_MEMTEST_SCRATCH to point to a scratch memory area.
 
@@ -11,10 +11,10 @@ Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
  1 files changed, 5 insertions(+), 4 deletions(-)
 
 diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index 555b350..0c6fce6 100644
+index 053f5df..b265b0c 100644
 --- a/include/configs/omap3_beagle.h
 +++ b/include/configs/omap3_beagle.h
-@@ -297,10 +297,11 @@
+@@ -269,10 +269,11 @@
  /* Boot Argument Buffer Size */
  #define CONFIG_SYS_BARGSIZE           (CONFIG_SYS_CBSIZE)
  
@@ -31,5 +31,5 @@ index 555b350..0c6fce6 100644
  #define CONFIG_SYS_LOAD_ADDR          (OMAP34XX_SDRC_CS0)     /* default */
                                                        /* load address */
 -- 
-1.5.6.4
+1.6.6.1
 
similarity index 92%
rename from recipes-bsp/u-boot/u-boot/0044-Beagleboard-Adjust-boot.patch
rename to recipes-bsp/u-boot/u-boot/0047-BeagleBoard-Adjust-boot-command-on-USER-button.patch
index 19b4ab79698cda4271ea3a38e8d232726f45db8e..7d40ff7ebe5904465e47a245ccede35ceace848f 100644 (file)
@@ -1,7 +1,7 @@
-From c8d52ff17d71be0c632f20092d96e9530088c786 Mon Sep 17 00:00:00 2001
+From d3f9ba7264111551ea11f33aadbecc15c87a4332 Mon Sep 17 00:00:00 2001
 From: Jason Kridner <jkridner@beagleboard.org>
 Date: Wed, 21 Jul 2010 08:47:59 -0500
-Subject: [PATCH] BeagleBoard: Adjust boot command on USER button
+Subject: [PATCH 47/51] BeagleBoard: Adjust boot command on USER button
 
 When the USER button is pressed, the default boot command will attempt
 to load user.scr.  If that fails, it will try to load a ramdisk image.
@@ -14,10 +14,10 @@ attempts to load the user.scr file.
  1 files changed, 44 insertions(+), 7 deletions(-)
 
 diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index f372de2..6d1166f 100644
+index b265b0c..1a76004 100644
 --- a/include/configs/omap3_beagle.h
 +++ b/include/configs/omap3_beagle.h
-@@ -195,9 +195,12 @@
+@@ -200,9 +200,12 @@
  #define CONFIG_BOOTDELAY              3
  
  #define CONFIG_EXTRA_ENV_SETTINGS \
@@ -31,7 +31,7 @@ index f372de2..6d1166f 100644
        "mpurate=500\0" \
        "buddy=none\0" \
        "vram=12M\0" \
-@@ -208,7 +211,10 @@
+@@ -213,7 +216,10 @@
        "mmcrootfstype=ext3 rootwait\0" \
        "nandroot=/dev/mtdblock4 rw\0" \
        "nandrootfstype=jffs2\0" \
@@ -42,7 +42,7 @@ index f372de2..6d1166f 100644
                "mpurate=${mpurate} " \
                "buddy=${buddy} "\
                "vram=${vram} " \
-@@ -217,6 +223,7 @@
+@@ -222,6 +228,7 @@
                "root=${mmcroot} " \
                "rootfstype=${mmcrootfstype}\0" \
        "nandargs=setenv bootargs console=${console} " \
@@ -50,7 +50,7 @@ index f372de2..6d1166f 100644
                "mpurate=${mpurate} " \
                "buddy=${buddy} "\
                "vram=${vram} " \
-@@ -224,7 +231,18 @@
+@@ -229,7 +236,18 @@
                "omapdss.def_disp=${defaultdisplay} " \
                "root=${nandroot} " \
                "rootfstype=${nandrootfstype}\0" \
@@ -70,7 +70,7 @@ index f372de2..6d1166f 100644
        "bootscript=echo Running bootscript from mmc ...; " \
                "source ${loadaddr}\0" \
        "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
-@@ -235,15 +253,34 @@
+@@ -240,15 +258,34 @@
                "run nandargs; " \
                "nand read ${loadaddr} 280000 400000; " \
                "bootm ${loadaddr}\0" \
@@ -111,5 +111,5 @@ index f372de2..6d1166f 100644
                "fi; " \
        "else run nandboot; fi"
 -- 
-1.6.1
+1.6.6.1
 
similarity index 88%
rename from recipes-bsp/u-boot/u-boot/0045-BeagleBoard-Enable-pullups-on-i2c2.patch
rename to recipes-bsp/u-boot/u-boot/0048-BeagleBoard-Enable-pullups-on-i2c2.patch
index ea3ab74ce44b59e0abe154c7a59c7b84207e970a..dce5de5b183a13f97e922a536e9f977d57f5242f 100644 (file)
@@ -1,7 +1,7 @@
-From bf4b655c6c02bbf95bd6ebbf820e53dbd8eb4803 Mon Sep 17 00:00:00 2001
+From 35e971eea9c9d9cb690da0509e0f8a48a2cb1269 Mon Sep 17 00:00:00 2001
 From: Steve Kipisz <s-kipisz2@ti.com>
 Date: Thu, 5 Aug 2010 10:36:07 -0500
-Subject: [PATCH] BeagleBoard: Enable pullups on i2c2.
+Subject: [PATCH 48/51] BeagleBoard: Enable pullups on i2c2.
 
 ---
  board/ti/beagle/beagle.c           |    2 ++
@@ -9,10 +9,10 @@ Subject: [PATCH] BeagleBoard: Enable pullups on i2c2.
  2 files changed, 11 insertions(+), 0 deletions(-)
 
 diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
-index cdba3dd..eeb37bc 100644
+index 66df719..ee6bad2 100644
 --- a/board/ti/beagle/beagle.c
 +++ b/board/ti/beagle/beagle.c
-@@ -163,6 +163,8 @@ int misc_init_r(void)
+@@ -171,6 +171,8 @@ int misc_init_r(void)
        struct gpio *gpio5_base = (struct gpio *)OMAP34XX_GPIO5_BASE;
        struct gpio *gpio6_base = (struct gpio *)OMAP34XX_GPIO6_BASE;
  
similarity index 89%
rename from recipes-bsp/u-boot/u-boot/0046-BeagleBoard-Add-camera-to-default-bootargs.patch
rename to recipes-bsp/u-boot/u-boot/0049-BeagleBoard-Add-camera-to-default-bootargs.patch
index f999f7faa9093109f6c70d6f3b39d83a50d2c072..e3ac8609264ab7216066a96163fe36bb6922af3e 100644 (file)
@@ -1,8 +1,7 @@
-From 519ecc8a8f441d30e55c7e4552c63e2363fa6dd5 Mon Sep 17 00:00:00 2001
+From 0a49d60caf30738f13b60a71e740e28f4e7af902 Mon Sep 17 00:00:00 2001
 From: Jason Kridner <jkridner@beagleboard.org>
 Date: Thu, 5 Aug 2010 13:54:12 -0500
-Subject: [PATCH] BeagleBoard: Add camera to default bootargs
-
+Subject: [PATCH 49/51] BeagleBoard: Add camera to default bootargs
 
 Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
 ---
@@ -46,5 +45,5 @@ index 1a76004..48ad805 100644
                "omapfb.mode=dvi:${dvimode} " \
                "omapdss.def_disp=${defaultdisplay} " \
 -- 
-1.5.6.4
+1.6.6.1
 
similarity index 89%
rename from recipes-bsp/u-boot/u-boot/0001-BeagleBoard-move-ramdisk-parameters.patch
rename to recipes-bsp/u-boot/u-boot/0050-BeagleBoard-move-ramdisk-parameters.patch
index 5d6e69d24b7fa69a15e0f90902f94b530842839a..ebd998dc4d1c2a66eff6ac771de65de3c15c29bf 100644 (file)
@@ -1,7 +1,7 @@
-From c8d02f2a8500f06de39681aed60ea5c9894f8087 Mon Sep 17 00:00:00 2001
+From 21738fa5ae05dd5060cf755ac0460f5d1f27e910 Mon Sep 17 00:00:00 2001
 From: Jason Kridner <jkridner@beagleboard.org>
 Date: Wed, 11 Aug 2010 14:50:38 -0500
-Subject: [PATCH] BeagleBoard: move ramdisk parameters
+Subject: [PATCH 50/51] BeagleBoard: move ramdisk parameters
 
 This will make it easier to reprogram the ramdisk size.
 
@@ -34,5 +34,5 @@ index 48ad805..4f5c1d4 100644
        "loadramdisk=fatload mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
        "bootscript=echo Running bootscript from mmc ...; " \
 -- 
-1.5.6.4
+1.6.6.1
 
diff --git a/recipes-bsp/u-boot/u-boot/0051-add-support-for-beagleboardtoys-expansionboards.patch b/recipes-bsp/u-boot/u-boot/0051-add-support-for-beagleboardtoys-expansionboards.patch
new file mode 100644 (file)
index 0000000..3f75a60
--- /dev/null
@@ -0,0 +1,74 @@
+From 05c4ef3b0963cef095075486820b030226ced7c3 Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@dominion.thruhere.net>
+Date: Tue, 8 Feb 2011 12:02:46 +0100
+Subject: [PATCH 51/51] add support for beagleboardtoys expansionboards
+
+Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
+---
+ board/ti/beagle/beagle.c |   15 +++++++++++++++
+ board/ti/beagle/beagle.h |   10 ++++++++++
+ 2 files changed, 25 insertions(+), 0 deletions(-)
+
+diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
+index ee6bad2..fdd9c09 100644
+--- a/board/ti/beagle/beagle.c
++++ b/board/ti/beagle/beagle.c
+@@ -62,12 +62,16 @@ static struct {
+ #define HYR_VENDORID                  0x0400
+ #define MENTOREL_VENDORID             0x0500
+ #define KBADC_VENDORID                        0x0600
++#define BBTOYS_VENDORID                       0x0B00
+ #define TINCANTOOLS_ZIPPY             0x01000100
+ #define TINCANTOOLS_ZIPPY2            0x02000100
+ #define TINCANTOOLS_TRAINER           0x04000100
+ #define TINCANTOOLS_SHOWDOG           0x03000100
+ #define KBADC_BEAGLEFPGA              0x01000600
++#define BBTOYS_WIFI                           0x01000B00
++#define BBTOYS_VGA                            0x02000B00
++#define BBTOYS_LCD                            0x03000B00
+ #define BEAGLE_NO_EEPROM              0xffffffff
+@@ -209,6 +213,17 @@ int misc_init_r(void)
+                       MUX_KBADC_BEAGLEFPGA();
+                       setenv("buddy", "beaglefpga");
+                       break;
++              case BBTOYS_WIFI:
++                      printf("Recognized Beagleboardtoys wifi board\n");
++                      MUX_BBTOYS_WIFI()
++                      setenv("buddy", "bbtoys-wifi");         
++                      break;;
++              case BBTOYS_VGA:
++                      printf("Recognized Beagleboardtoys VGA board\n");
++                      break;;
++              case BBTOYS_LCD:
++                      printf("Recognized Beagleboardtoys LCD board\n");
++                      break;; 
+               case BEAGLE_NO_EEPROM:
+                       printf("No EEPROM on expansion board\n");
+                       setenv("buddy", "none");
+diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h
+index cb7fd1c..2dc6ee6 100644
+--- a/board/ti/beagle/beagle.h
++++ b/board/ti/beagle/beagle.h
+@@ -459,6 +459,16 @@ const omap3_sysinfo sysinfo = {
+       MUX_VAL(CP(MCBSP1_DR),      (IEN  | PTU | EN  | M1)) /*MCSPI4_SOMI*/\
+       MUX_VAL(CP(MCBSP1_FSX),     (IDIS | PTU | DIS | M1)) /*MCSPI4_CS0*/\
++#define MUX_BBTOYS_WIFI() \
++      MUX_VAL(CP(MMC2_CLK),       (IEN  | PTU | EN  | M0)) /*MMC2_CLK*/\
++      MUX_VAL(CP(MMC2_CMD),       (IEN  | PTU | EN  | M0)) /*MMC2_CMD*/\
++      MUX_VAL(CP(MMC2_DAT0),      (IEN  | PTU | EN  | M0)) /*MMC2_DAT0*/\
++      MUX_VAL(CP(MMC2_DAT1),      (IEN  | PTU | EN  | M0)) /*MMC2_DAT1*/\
++      MUX_VAL(CP(MMC2_DAT2),      (IEN  | PTU | EN  | M0)) /*MMC2_DAT2*/\
++      MUX_VAL(CP(MMC2_DAT3),      (IEN  | PTU | EN  | M0)) /*MMC2_DAT3*/\
++      MUX_VAL(CP(MMC2_DAT5),      (IEN  | PTU | EN  | M4)) /*GPIO_137*/\
++      MUX_VAL(CP(MMC2_DAT7),      (IDIS | PTD | DIS | M4)) /*GPIO_139*/\
++
+ /*
+  * Display Configuration
+  */
+-- 
+1.6.6.1
+
index 75ab9f90067d5a3de628501d77a8bfddf65f2cb7..c4f393d1eefd58f344d63afb6e8f1777c651de67 100644 (file)
@@ -1,10 +1,10 @@
 require u-boot.inc
-PR ="r65"
+PR ="r66"
 
 FILESPATHPKG =. "u-boot-git:"
 
 SRC_URI_beagleboard = "git://www.denx.de/git/u-boot.git;protocol=git \
-                       file://0001-OMAP3-enable-i2c-bus-switching-for-Beagle-and-Overo.patch \
+                       file://0001-Enable-I2C-bus-switching.patch \
                        file://0002-OMAP3-add-board-revision-detection-for-Overo.patch \
                        file://0003-OMAP3-update-Beagle-revision-detection-to-recognize-.patch \
                        file://0004-OMAP3-Set-VAUX2-to-1.8V-for-EHCI-PHY-on-Beagle-Rev-C.patch \
@@ -43,17 +43,18 @@ SRC_URI_beagleboard = "git://www.denx.de/git/u-boot.git;protocol=git \
                        file://0037-OMAP3-beagle-pass-expansionboard-name-in-bootargs.patch \
                        file://0038-Added-configurations-for-xM-Rev-A-board.patch \
                        file://0039-OMAP3-beagle-setenv-beaglerev-for-AxBx-Cx-xMA-for-be.patch \
-                       file://0001-OMAP-mmc-add-support-for-second-and-third-mmc-chan.patch \
-                       file://0001-OMAP3-Beagle-enable-support-for-second-and-third-m.patch \
-                       file://0038-BeagleBoard-Added-LED-driver.patch \
-                       file://0039-Add-led-command.patch \
-                       file://0041-BeagleBoard-Enabled-LEDs.patch \
-                       file://0042-BeagleBoard-New-command-for-status-of-USER-button.patch \
-                       file://0043-BeagleBoard-Add-CONFIG_SYS_MEMTEST_SCRATCH.patch \
-                       file://0044-Beagleboard-Adjust-boot.patch \
-                       file://0045-BeagleBoard-Enable-pullups-on-i2c2.patch \
-                       file://0046-BeagleBoard-Add-camera-to-default-bootargs.patch \
-                       file://0001-BeagleBoard-move-ramdisk-parameters.patch \
+                       file://0040-OMAP-mmc-add-support-for-second-and-third-mmc-channe.patch \
+                       file://0041-OMAP3-Beagle-enable-support-for-second-and-third-mmc.patch \
+                       file://0042-BeagleBoard-Added-LED-driver.patch \
+                       file://0043-Add-led-command.patch \
+                       file://0044-BeagleBoard-Enabled-LEDs.patch \
+                       file://0045-BeagleBoard-Added-userbutton-command.patch \
+                       file://0046-BeagleBoard-Add-CONFIG_SYS_MEMTEST_SCRATCH.patch \
+                       file://0047-BeagleBoard-Adjust-boot-command-on-USER-button.patch \
+                       file://0048-BeagleBoard-Enable-pullups-on-i2c2.patch \
+                       file://0049-BeagleBoard-Add-camera-to-default-bootargs.patch \
+                       file://0050-BeagleBoard-move-ramdisk-parameters.patch \
+                       file://0051-add-support-for-beagleboardtoys-expansionboards.patch \
                        file://fw_env.config \
 "
 SRCREV_pn-${PN}_beagleboard = "ca6e1c136ddb720c3bb2cc043b99f7f06bc46c55"