linux-ti33x-psp 3.2: backport PM and USB fixes from PSP

The complete patchset will get rebased to the tip of the PSP tree soon, but the
conflicts take a lot of time to resolve.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: fix buttons on LCD capes

One patch to add button layout for the a1 revision of the 3.5" LCD cape and
another patch to stop spidev from loading when SPI1_D1 is used as gpio

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp: enable TSL2550 driver for beaglebone weatherstation cape

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: switch ADC to 16x averaging, disable 275MHz, add 4.3" LCD support

* The switch to 16x averaging is done to combat the excessive noise in the
  signal. It's still *very* bad, but the TS cursor jitter has decreased a bit
* The OPP for 275MHz was disabled due to all the errata. Both the EMIF and MUSB
  don't seem to like that OPP.
* The resistive touch version of the 4.3" LCD cape is supported in 24 bit mode.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-mainline 3.2.18: build in usbhid and tsc2007 and run 'make oldconfig'

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: set PV accordingly, when not using tipspkernel

The patchset in PATCHES_OVER_PSP updates the kernel to 3.2.x, so make PV match.
This doesn't need PR or MACHINE_KERNEL_PR bumps since both the kernel ABI and
file locations remain the same.

Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Acked-by: Koen Kooi <koen@circuitco.com>

tipspkernel: add extra level to FILESPATH with major version in the name

Add PMV variable to contain major version by extracting first 2 numbers from PV
Insert new level to FILESPATH - PN-PV-PR:PN-PV:PN-PMV:PN:files:.
Allow keeping patches and configs generic for the series (i.e. 3.2) while
incrementing stable releases (i.e. 3.2.18)
Drop use of BP and BPN, as they don't change for the kernel

Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Acked-by: Koen Kooi <koen@circuitco.com>

linux-ti33x-psp 3.2: fix pin free check once and for all

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: sgx fix from PSP + dvi cape audio fix

Also move more things to modules to speed up boot.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: update to 3.2.18

Duplicate patches between PSP and 3.2.17 have been dropped from the 3.2.17 series

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: i2c and cape fixes

* Fix I2C prescaler to run at full speed instead of 1/4 speed
* fix led/spidev/w1 check
* move RS232 cape to ttyO2

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-mainline: Add patches to enable libertas firmware loading asynchronously

When using udev >=177 libertas driver does not load properly the firmware [1].
The patches 0001-0016 were taken from [2] and can be viewed at [3]. Patch 0017
I created to fix compiler complaining for missing symbol is_interrupt when
DEBUG set.
The patch series was tested with meta-gumstix on overo with udev-175 and
udev-182.

[1] http://www.spinics.net/lists/linux-wireless/msg85541.html
[2] git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next.git
[3] http://git.kernel.org/?p=linux/kernel/git/linville/wireless-next.git;a=history;f=drivers/net/wireless/libertas;hb=HEAD

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-mainline: update to 3.2.18

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

ti-hw-bringup-image: disable sdcard image class

The class breaks with the current genext2fs in oe-core.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: merge in 6 musb patches from PSP

Updating the SRCREV would require redoing all boardfile patches due to the
EVM-SK changes. So cherry-pick the 6 patches we need.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti335x-psp 3.2: cape enhancements and patch cleanups

* add support for revision A2 of the 7" Beagleboardtoys cape
* allow capes to disable w1-gpio
* add stub for the Beagleboardtoys camera cape
* Fill in more entries in the am335x mux table
* switch to 4x oversampling in the tsadc driver to reduce jitter (or cursor hula
  dancing as Gerald describes it)
* Add a function to set the pinmux from the eeprom data instead of the boardfile
* Add support for the Bebopr cape

All beaglebone patches have been rediffed and renumbered to avoid confusion

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: silence useless omap4 hwmod warning

This fixes the last remaining debug print shown when booting with 'quiet'

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: demote cpsw PHY message to INFO

This keeps them from appearing on the screen during quiet boots. They are still
being reported, so no info is lost.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

beaglebone-capes: add a powerdown script as well

The current powerdown script disables the PMIC backlight

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

omapfbplay: import from OE classic + api tweak

Signed-off-by: Roger Monk <r-monk@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

README: by popular demand add comment on how to avoid systemd breakage

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

README: no longer depend on toolchain-layer, remove references to older gcc/binutils

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: make st7735fb DMA safe

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

beagleboard-getting-started: update for revision A6 release

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: updates

* Fix LEDs on 3.5", 7" and DVI capes
* Add support for rev A2 DVI capes
* Minor warning fixes to the boardfile
* All PWMs are initialized, but not pinmuxed
* Debugfs output for mux direction has been fixed
* When no capes claim the SPI bus /dev/spidev2.0 will appear

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: avoid gold linker for Thumb2 kernel

BeagleBone kernel is required to be built in Thumb2 mode for fast boot.
Gold linker is not yet perfect for this, giving an internal error:

| arm-linux-gnueabi-ld: internal error in thumb_branch_common, at .../binutils-cross-2.22-r6/binutils-2.22/gold/arm.cc:4149

While this fix can be put in generic linux.inc for all the kernels, it's
better to test the Gold linker out as much as possible and only disable it
for known issues, like this one (until it gets fixed, of course).

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

omap3-sgx-modules, ti-staging.inc, ti-linuxutils: change PACKAGE_STRIP = "no" to the proper INHIBIT_PACKAGE_STRIP = "1"

PACKAGE_STRIP doesn't exit in oe-core (anymore)

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: for beaglebone set default Asm architecture to armv7-a

Beaglebone kernel needs to be built in Thumb2 mode to achieve fast boot
times. Unfortunately, that build is broken under newer binutils-2.22 with
the below Assembler error. The fix is to pass the specific -march=armv7-a
flag to the Assembler to make it work.

| arch/arm/boot/compressed/head.S: Assembler messages:
| arch/arm/boot/compressed/head.S:127: Error: selected processor does not support requested special purpose register -- `mrs r2,cpsr'
| arch/arm/boot/compressed/head.S:134: Error: selected processor does not support requested special purpose register -- `mrs r2,cpsr'
| arch/arm/boot/compressed/head.S:136: Error: selected processor does not support requested special purpose register -- `msr cpsr_c,r2'
| make[2]: *** [arch/arm/boot/compressed/head.o] Error 1
| make[1]: *** [arch/arm/boot/compressed/vmlinux] Error 2

Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Acked-by: Koen Kooi <koen@circuitco.com>

uim: userspace app to manage wl12xx firmware loading

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: rebase patches onto latest git

The psp tree added a patch to limit the beaglebone to 500MHz when powered by USB, which triggered conflicts in the patches. The 3.2.16 series has been rediffed as well, no functional changes.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: bump SRCREV for 2 CPPI1.4 fixes

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti335x-psp 3.2: switch to userspace governor for beaglebone, ondemand seems to cause problems on a small percentage of boards

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti335x-psp 3.2: add patch to disable heartbeat LED trigger on shutdown

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti335x-psp 3.2: use proper irq fix from Vaibhav

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti335x-psp 3.2: add support for CAN, RS232 and Battery beaglebone capes

Also change defconfig to prepare for audio support and fix lcd35 pinmux

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti335x-psp 3.2: update to 3.2.16

3.2.16 is the final release in the 3.2-stable series by Greg KH.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti335x-psp 3.2: bump SRCREV to head of v3.2-staging and add 2 irq patches

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-mainline 3.2: shut down heartbeat LED on halt/reboot/panic

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-mainline 3.2: add ASoC fixes for beagleboard

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-mainline 3.2: add support for beagleboard wifi expansion board

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

sdcard_image bbclass: make ext4 the default

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

u-boot 2011.12: switch beagleboard to ext4 to match beaglebone

Also add patch to increase ext2 read speed.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Acked-by: Tom Rini <trini@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

u-boot 2011.12: don't poke at uLCD7 settings from u-boot, it's handled in the kernel now

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Acked-by: Tom Rini <trini@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-mainline 3.2: fix build of external SGX modules

Patch downloaded from https://github.com/RobertCNelson/stable-kernel/tree/master/patches/sgx

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

beagleboard: switch to linux-mainline and drag in more modules

also bump MACHINE_KERNEL_PR to force rebuild of external modules like sgx and dsp.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-mainline 3.2: kernel recipe based on mainline 3.2.16 with additional patches for e.g. beagleboard on top

This patchset is managed in https://github.com/beagleboard/kernel/tree/beagleboard-3.2 by Robert Nelson and myself.

Tested on beagleboard-xM/Angstrom

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

bonescript: silence systemd bbclass WARNING, ${PN}-systemd is unwanted

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

beaglebone: re-enable THUMB2_KERNEL in defconfig, as it affects boot time by .5s

This reverts commit 3c693c26087aa148b944166083b5336f05d1c15b.

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

libgles-omap3: enable for ti814x SOC family

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

libgles-omap3: work around bug in opkg

All the EGL_BADALLOC failures that user have been reporting turn out to be
a bug in opkg:
http://groups.google.com/group/opkg-devel/browse_thread/thread/741d18b0ef31435e#

Opkg decides to relink symlinks to the wrong files. As a workaround we check
the symlink during every bootup and fix it if needed.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

libgles-omap3: package dri files into driwsegl subpackages

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

libgles-omap3: move X related binaries into X11WSEGL subpackages to avoid dragging in libx11 and friends

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

libgles-omap3: copy over all binaries and abstract install process

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

beaglebone: disable THUMB2_KERNEL in defconfig for newer binutils

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

libgles-omap3: add missing libdrm dependency

dpkg-deb -I shows:

 Package: libgles-omap3
 Version: 4.05.00.03-r26
 Depends: libgles-omap3-flipwsegl, devmem2, update-rc.d, libdrm2 (>= 2.4.31), libgles-omap3-linuxfbwsegl, fbset, libc6 (>= 2.12), libgles-omap3-blitwsegl, libgles-omap3-frontwsegl

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

cloud9-gnome-image: same as cloud9-image, but with GNOME added to it

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

bonescript: update to latest git

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

beaglebone-getting-started: updated to latest git

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: fix VGA cape detection for beaglebone

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

omap4.inc: change to require tune-cortexa9.inc

As reported by Eric Bénard

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: fix ehrPWM1 for beaglebone

This makes the backlight on teh 7" LCD cape work again. Also add a patch to
print the hardware revision of the cape.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: include latest MUSB fixes

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: rebase onto latest PSP

This fixes most PM operations: cpufreq, cpuidle and suspend. Resume does not
work on beaglebone, but 3 out of 4 ain't bad :)

The M3 firmware needed for suspend/resume is used as a binary, building it
from source and including it from sysroots is planned for future commits.

Beaglebone patches have been forward ported and runtime tested.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

am33x-cm3: add firmware for am33x suspend/resume

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

beaglebone-capes: userspace support for capes

Not everything can be done inside the kernel yet, so have a script that does the userspace portion.
Only the LCD3 cape is supported currently, more will follow later.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

libgles-omap3: fix RRECOMMENDS

The modules assignment overwrote the previous ones, leading to missing libraries.

Before:
 Package: libgles-omap3
 Recommends: omap3-sgx-modules
After:
 Package: libgles-omap3
 Recommends: omap3-sgx-modules, libgles-omap3-es8, libgles-omap3-es6, libgles-omap3-es5, libgles-omap3-es3, libgles-omap3-es2

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux 3.0: update to 3.0.28

Runtime tested on Angstrom/beagleboard-xM

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

cloud9-image: add rsync

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti335x-psp 3.2: fix 3.5" cape support, turn on CONFIG_AUDIT

* bump MACHINE_KERNEL_PR for the CONFIG_AUDIT change

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

beaglebone-tester: bump SRCREV to fix PMIC test

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

u-boot 2011.10rc: fix loading from /boot by adding ext4 support

This patchset was pulled from u-boot patchwork and aren't final, but testing
on beaglebone shows it to work.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Acked-by: Tom Rini <trini@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti335x-psp 3.2: update to 3.2.14

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

README: refer to toolchain-layer in meta-openembedded

Since gcc-4.5, binutils-2.20.1 and eglibc-2.12 are now in their own
toolchain-layer of meta-openembedded, adjust README accordingly.

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: fix VGA cape partnumber

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: improve cape support

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: update to 3.2.13

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

multi-kernel: add a comment on the addition of preparekernel task

As suggested by Richard:
https://lists.yoctoproject.org/pipermail/meta-ti/2012-March/000869.html
While at it, reformat the header.

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

am335x-evm.conf: Add 'ubi' to IMAGE_FSTYPES, use '+=' in assignment

As per
http://lists.linuxtogo.org/pipermail/openembedded-core/2012-March/020053.html
a machine conf file should use '+=' to set IMAGE_FSTYPES.  We also add
the required MKUBIFS_ARGS / UBINIZE_ARGS.  These are placed next to the
line that sets us to use the PSP kernel tree and reference the TI wiki
for the source of our info as well as dmesg / userland commands.

Signed-off-by: Tom Rini <trini@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

omap3evm.conf: Use '+=' not '?=' in IMAGE_FSTYPES

As per
http://lists.linuxtogo.org/pipermail/openembedded-core/2012-March/020053.html
a machine conf file should use '+=' to set IMAGE_FSTYPES.

Signed-off-by: Tom Rini <trini@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

ti814x.inc: Use '+=' not '?=' in IMAGE_FSTYPES

As per
http://lists.linuxtogo.org/pipermail/openembedded-core/2012-March/020053.html
a machine conf file should use '+=' to set IMAGE_FSTYPES.

Signed-off-by: Tom Rini <trini@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

am37x-evm.conf: Use '+=' not '?=' in IMAGE_FSTYPES

As per
http://lists.linuxtogo.org/pipermail/openembedded-core/2012-March/020053.html
a machine conf file should use '+=' to set IMAGE_FSTYPES.

Signed-off-by: Tom Rini <trini@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

multi-kernel: fix get_kernelversion returns None for do_compileconfigs

The function get_kernelversion uses generated header files to extract the
version number. But those files are not available until do_compile, and
do_compileconfigs is injected before that, hence the version becomes None
and breaks in several places.

Introduce a new task do_preparekernel that calls "make prepare" in the
kernel tree to generate all the necessary files. It's also safer to call
do_configure early on.

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-{ti33x,omapl138}: simplify and unify handling of "tipspkernel" feature

And move it to a separate .inc for other kernels to use.

Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-omap4: remove D_P = "-1" as it's the only kernel

Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti81xx: delete broken symlink to dm816x-evm configs

Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux 3.0: update to 3.0.25

Backport Nishants OPP/hwmod fix to get more than 600MHz out of 37xx, but don't
activate it yet. 3630ES1.2 derived silicon gets misdetected:

xM revision A:
[    0.000000] OMAP3630 ES1.0 (l2cache iva sgx neon isp 192mhz_clk )

new xM revision C:
[    0.000000] OMAP3630 ES1.2 (l2cache neon isp 192mhz_clk )

Since the iva hwmod is missing the OPP tables will fail and clock it back to
600MHz. But with the patch the kernel hangs in early init. This problem isn't
specific to this kernel update, it just coincided with ES1.2 silicon arriving
on my desk.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

ti-eula-unpack: fix the check for 32bit glibc, make it a warning

This makes better checking for 32bit glibc on Ubuntu 11.10
In general, change to a WARNING instead of breaking the build with an ERROR,
to accomodate other different implementations of 32/64bit system libraries,
as well as multiarch setups.
Will need to come up with more robust solution later.

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

README: update with the latest info

With distro-less fixes in OE-Core, no distro dependencies are required.
Better explain toolchain requirements and setup specific versions.

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux 3.0: Fix sprz319 erratum 2.1

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti335x-psp 3.2: update to v3.2.11

Also add script used to generate patches and SRC_URI

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

u-boot: Fix config-Always-use-GNU-ld patch to work with dash

>& /dev/null is not ok for dash so use > /dev/null 2>&1

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

ti-eula-unpack: throw error message in case 32bit glibc is missing

TI installation tool requires 32bit glibc [1]

[1] https://lists.yoctoproject.org/pipermail/meta-ti/2012-January/000357.html

Signed-off-by: Andreas M??ller <schnitzeltony@googlemail.com>
Acked-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

gadget init: don't dump info to info.txt on boot

This script adds ~10s to the boot time, doesn't have error checking and
prevents loading the storage gadget 3 out of 10 times.

Remove it from ExecStartPre to get a fast, consistent boot. The functionality
should be moved to bone101.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: enable CONFIG_WATCHDOG_NOWAYOUT for beaglebone

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-omap4 3.1.0: patch to workaround installing FW images w/o subdirs

This fixes below error found on some distros (Gentoo and Fedora):
*** No rule to make target `lib/firmware/./', needed by `lib/firmware/ti_3410.fw'.  Stop.

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

pandaboard: remove all traces of old 'omap4430-panda' machine

It has been completely replaced with the 'pandaboard' machine config.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

bonescript: update to latest git

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

soc-family.inc: it's now in OE-Core, remove locally

The soc-family.inc file to set up SOC_FAMILY in MACHINEOVERRIDES has been
accepted upstream to OE-Core, can remove it from meta-ti now.

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-omap4: update to 3.1.0 (latest ti-ubuntu branch)

Boot tested on Pandaboard ES/Angstrom

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: remove patch that slipped in when regenerating SRC_URI

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>