ti-hw-bringup-image: remove duplicate timestamp-service, as it's in systemd-image

Since systemd-image from meta-angstrom already includes timestamp-service, remove
the duplicate from ti-hw-bringup-image recipe, which uses the former as a base.

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

layer.conf: lower layer priority from 10 to 6

Lowering layer priority from 10 to 6 aligns meta-ti with other BSP layers
and also allows distributions to override our recipes.

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

libgles-omap3: fix for latest oe-core mesa changes

* add virtual/libgles1 virtual/libgles2 to PROVIDES
* add RREPLACES_{PN}* for mesa's libegl* libgles1* libgles2*

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

mesa: add appends to avoid providing conflicts

For libgles-omap3 compatible machines mesa should only provide libgl.

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Rebased to squash removal of mesa-xlib.

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

beaglebone-tester: FTDI eeprom test, v2

Check descriptor instead of VID/PID

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

beaglebone tester: bump SRCREV for FTDI test

An extra test for the FTDI eeprom was added to catch programming errors that would break CCS.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

beaglebone-tester: ship testaudio, fix depends

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: update beaglebone defconfig

* Add more RTC modules
* Disable cgroup controllers with a lot of overhead

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-mainline: update to 3.2.28

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: update to 3.2.28 and add motorcape support

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti335x-psp 3.2: mux orientation detect for camera sensor to gpio instead of gpmc

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: update to 3.2.25

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: LCD7 A3 support, eMMC cape support, camera cape improvements

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

recipes: Use 'packagegroup' instead of 'task'

bring recipes in sync with OE-Core, task bbclass
is now replaced by packagegroup.

and task recipes are now called packagegroup_something

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

u-boot_2011.09[.10rc]: Always use gnu ld for LD

   - Pull in gnu ld patch for 2011.10rc recipe
   - Bump PR

Signed-off-by: Roger Monk <r-monk@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

u-boot 2011.09+git: update to latest version of Tom Rini's tree

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

ti-dmai.inc: fix 'proto='-warning on recipe parsing

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

am-sysinfo: switch 'proto' to 'protocol' in SRC_URI

Signed-off-by: Roger Monk <r-monk@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

gstreamer-ti: convert proto to protocol in SRC_URI

Signed-off-by: Roger Monk <r-monk@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: update to 3.2.23

Regenerate all beaglebone patches and add one vfs tracer patch for powertop

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: enable more tracing features for beaglebone

This makes powertop 2.0 happy

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: add fixed for cssp, fbset and OPP50

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

u-boot 2011.09+git: update to latest version of Tom Rini's tree

All patches have been rediffed and boot tested

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: add support for audio cape and disable LBO gpio for battery cape

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: add camera driver for beaglebone

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

beaglebone-capes: use backlight hack for all LCD4 variants

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: fix audio/spidev clash on beaglebone

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: update to 3.2.21, add libertas fixes

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

beaglebone-tester: re-enable pmic test

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

beaglebone-tester: bump SRCREV to fix serial console race

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

netbase: follow oe-core to v5.0

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux.inc: remove unused variable RPSRC

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux.inc: remove require linux-tools.inc

linux-tools.inc was removed in oe-core (perf has own package) [1].

[1] http://cgit.openembedded.org/openembedded-core/commit/?id=b485f3e0e55ad62079ed0913970ff0620f4808ea

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

beaglebone-tester: bump SRCREV to fix failure reporting

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: turn on CONFIG_USB_SUSPEND to fix usb mass storage

Many thanks to Arkadiusz Karas <arkkar13@googlemail.com> for figuring that out
and sharing the info.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

beaglebone-capes: add support for weatherstation cape

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

beaglebone-capes: add support for 4.3" LCD cape

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: backport PM and USB fixes from PSP

The complete patchset will get rebased to the tip of the PSP tree soon, but the
conflicts take a lot of time to resolve.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: fix buttons on LCD capes

One patch to add button layout for the a1 revision of the 3.5" LCD cape and
another patch to stop spidev from loading when SPI1_D1 is used as gpio

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp: enable TSL2550 driver for beaglebone weatherstation cape

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: switch ADC to 16x averaging, disable 275MHz, add 4.3" LCD support

* The switch to 16x averaging is done to combat the excessive noise in the
  signal. It's still *very* bad, but the TS cursor jitter has decreased a bit
* The OPP for 275MHz was disabled due to all the errata. Both the EMIF and MUSB
  don't seem to like that OPP.
* The resistive touch version of the 4.3" LCD cape is supported in 24 bit mode.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-mainline 3.2.18: build in usbhid and tsc2007 and run 'make oldconfig'

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: set PV accordingly, when not using tipspkernel

The patchset in PATCHES_OVER_PSP updates the kernel to 3.2.x, so make PV match.
This doesn't need PR or MACHINE_KERNEL_PR bumps since both the kernel ABI and
file locations remain the same.

Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Acked-by: Koen Kooi <koen@circuitco.com>

tipspkernel: add extra level to FILESPATH with major version in the name

Add PMV variable to contain major version by extracting first 2 numbers from PV
Insert new level to FILESPATH - PN-PV-PR:PN-PV:PN-PMV:PN:files:.
Allow keeping patches and configs generic for the series (i.e. 3.2) while
incrementing stable releases (i.e. 3.2.18)
Drop use of BP and BPN, as they don't change for the kernel

Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Acked-by: Koen Kooi <koen@circuitco.com>

linux-ti33x-psp 3.2: fix pin free check once and for all

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: sgx fix from PSP + dvi cape audio fix

Also move more things to modules to speed up boot.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: update to 3.2.18

Duplicate patches between PSP and 3.2.17 have been dropped from the 3.2.17 series

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: i2c and cape fixes

* Fix I2C prescaler to run at full speed instead of 1/4 speed
* fix led/spidev/w1 check
* move RS232 cape to ttyO2

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-mainline: Add patches to enable libertas firmware loading asynchronously

When using udev >=177 libertas driver does not load properly the firmware [1].
The patches 0001-0016 were taken from [2] and can be viewed at [3]. Patch 0017
I created to fix compiler complaining for missing symbol is_interrupt when
DEBUG set.
The patch series was tested with meta-gumstix on overo with udev-175 and
udev-182.

[1] http://www.spinics.net/lists/linux-wireless/msg85541.html
[2] git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next.git
[3] http://git.kernel.org/?p=linux/kernel/git/linville/wireless-next.git;a=history;f=drivers/net/wireless/libertas;hb=HEAD

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-mainline: update to 3.2.18

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

ti-hw-bringup-image: disable sdcard image class

The class breaks with the current genext2fs in oe-core.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: merge in 6 musb patches from PSP

Updating the SRCREV would require redoing all boardfile patches due to the
EVM-SK changes. So cherry-pick the 6 patches we need.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti335x-psp 3.2: cape enhancements and patch cleanups

* add support for revision A2 of the 7" Beagleboardtoys cape
* allow capes to disable w1-gpio
* add stub for the Beagleboardtoys camera cape
* Fill in more entries in the am335x mux table
* switch to 4x oversampling in the tsadc driver to reduce jitter (or cursor hula
  dancing as Gerald describes it)
* Add a function to set the pinmux from the eeprom data instead of the boardfile
* Add support for the Bebopr cape

All beaglebone patches have been rediffed and renumbered to avoid confusion

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: silence useless omap4 hwmod warning

This fixes the last remaining debug print shown when booting with 'quiet'

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: demote cpsw PHY message to INFO

This keeps them from appearing on the screen during quiet boots. They are still
being reported, so no info is lost.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

beaglebone-capes: add a powerdown script as well

The current powerdown script disables the PMIC backlight

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

omapfbplay: import from OE classic + api tweak

Signed-off-by: Roger Monk <r-monk@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

README: by popular demand add comment on how to avoid systemd breakage

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

README: no longer depend on toolchain-layer, remove references to older gcc/binutils

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: make st7735fb DMA safe

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

beagleboard-getting-started: update for revision A6 release

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: updates

* Fix LEDs on 3.5", 7" and DVI capes
* Add support for rev A2 DVI capes
* Minor warning fixes to the boardfile
* All PWMs are initialized, but not pinmuxed
* Debugfs output for mux direction has been fixed
* When no capes claim the SPI bus /dev/spidev2.0 will appear

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: avoid gold linker for Thumb2 kernel

BeagleBone kernel is required to be built in Thumb2 mode for fast boot.
Gold linker is not yet perfect for this, giving an internal error:

| arm-linux-gnueabi-ld: internal error in thumb_branch_common, at .../binutils-cross-2.22-r6/binutils-2.22/gold/arm.cc:4149

While this fix can be put in generic linux.inc for all the kernels, it's
better to test the Gold linker out as much as possible and only disable it
for known issues, like this one (until it gets fixed, of course).

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

omap3-sgx-modules, ti-staging.inc, ti-linuxutils: change PACKAGE_STRIP = "no" to the proper INHIBIT_PACKAGE_STRIP = "1"

PACKAGE_STRIP doesn't exit in oe-core (anymore)

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: for beaglebone set default Asm architecture to armv7-a

Beaglebone kernel needs to be built in Thumb2 mode to achieve fast boot
times. Unfortunately, that build is broken under newer binutils-2.22 with
the below Assembler error. The fix is to pass the specific -march=armv7-a
flag to the Assembler to make it work.

| arch/arm/boot/compressed/head.S: Assembler messages:
| arch/arm/boot/compressed/head.S:127: Error: selected processor does not support requested special purpose register -- `mrs r2,cpsr'
| arch/arm/boot/compressed/head.S:134: Error: selected processor does not support requested special purpose register -- `mrs r2,cpsr'
| arch/arm/boot/compressed/head.S:136: Error: selected processor does not support requested special purpose register -- `msr cpsr_c,r2'
| make[2]: *** [arch/arm/boot/compressed/head.o] Error 1
| make[1]: *** [arch/arm/boot/compressed/vmlinux] Error 2

Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Acked-by: Koen Kooi <koen@circuitco.com>

uim: userspace app to manage wl12xx firmware loading

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: rebase patches onto latest git

The psp tree added a patch to limit the beaglebone to 500MHz when powered by USB, which triggered conflicts in the patches. The 3.2.16 series has been rediffed as well, no functional changes.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: bump SRCREV for 2 CPPI1.4 fixes

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti335x-psp 3.2: switch to userspace governor for beaglebone, ondemand seems to cause problems on a small percentage of boards

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti335x-psp 3.2: add patch to disable heartbeat LED trigger on shutdown

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti335x-psp 3.2: use proper irq fix from Vaibhav

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti335x-psp 3.2: add support for CAN, RS232 and Battery beaglebone capes

Also change defconfig to prepare for audio support and fix lcd35 pinmux

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti335x-psp 3.2: update to 3.2.16

3.2.16 is the final release in the 3.2-stable series by Greg KH.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti335x-psp 3.2: bump SRCREV to head of v3.2-staging and add 2 irq patches

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-mainline 3.2: shut down heartbeat LED on halt/reboot/panic

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-mainline 3.2: add ASoC fixes for beagleboard

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-mainline 3.2: add support for beagleboard wifi expansion board

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

sdcard_image bbclass: make ext4 the default

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

u-boot 2011.12: switch beagleboard to ext4 to match beaglebone

Also add patch to increase ext2 read speed.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Acked-by: Tom Rini <trini@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

u-boot 2011.12: don't poke at uLCD7 settings from u-boot, it's handled in the kernel now

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Acked-by: Tom Rini <trini@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-mainline 3.2: fix build of external SGX modules

Patch downloaded from https://github.com/RobertCNelson/stable-kernel/tree/master/patches/sgx

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

beagleboard: switch to linux-mainline and drag in more modules

also bump MACHINE_KERNEL_PR to force rebuild of external modules like sgx and dsp.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-mainline 3.2: kernel recipe based on mainline 3.2.16 with additional patches for e.g. beagleboard on top

This patchset is managed in https://github.com/beagleboard/kernel/tree/beagleboard-3.2 by Robert Nelson and myself.

Tested on beagleboard-xM/Angstrom

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

bonescript: silence systemd bbclass WARNING, ${PN}-systemd is unwanted

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

beaglebone: re-enable THUMB2_KERNEL in defconfig, as it affects boot time by .5s

This reverts commit 3c693c26087aa148b944166083b5336f05d1c15b.

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

libgles-omap3: enable for ti814x SOC family

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

libgles-omap3: work around bug in opkg

All the EGL_BADALLOC failures that user have been reporting turn out to be
a bug in opkg:
http://groups.google.com/group/opkg-devel/browse_thread/thread/741d18b0ef31435e#

Opkg decides to relink symlinks to the wrong files. As a workaround we check
the symlink during every bootup and fix it if needed.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

libgles-omap3: package dri files into driwsegl subpackages

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

libgles-omap3: move X related binaries into X11WSEGL subpackages to avoid dragging in libx11 and friends

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

libgles-omap3: copy over all binaries and abstract install process

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

beaglebone: disable THUMB2_KERNEL in defconfig for newer binutils

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

libgles-omap3: add missing libdrm dependency

dpkg-deb -I shows:

 Package: libgles-omap3
 Version: 4.05.00.03-r26
 Depends: libgles-omap3-flipwsegl, devmem2, update-rc.d, libdrm2 (>= 2.4.31), libgles-omap3-linuxfbwsegl, fbset, libc6 (>= 2.12), libgles-omap3-blitwsegl, libgles-omap3-frontwsegl

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

cloud9-gnome-image: same as cloud9-image, but with GNOME added to it

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

bonescript: update to latest git

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

beaglebone-getting-started: updated to latest git

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: fix VGA cape detection for beaglebone

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

omap4.inc: change to require tune-cortexa9.inc

As reported by Eric Bénard

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: fix ehrPWM1 for beaglebone

This makes the backlight on teh 7" LCD cape work again. Also add a patch to
print the hardware revision of the cape.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: include latest MUSB fixes

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.2: rebase onto latest PSP

This fixes most PM operations: cpufreq, cpuidle and suspend. Resume does not
work on beaglebone, but 3 out of 4 ain't bad :)

The M3 firmware needed for suspend/resume is used as a binary, building it
from source and including it from sysroots is planned for future commits.

Beaglebone patches have been forward ported and runtime tested.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>