beaglebone-getting-started: add windows installer, update README, etc

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

beaglebone getting started: bump SRCREV

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

cloud9-image: add nodejs-dev

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

bonescript: fixup git repo

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

Merge branch 'master' of git.angstrom-distribution.org:meta-texasinstruments

udhcpd: Fixes and new udev rule

This moves the logic to configure and start dhcp to a udev rule which
is a better place than a systemd service

Also fixes a bug where stopping and starting network service would
cause dhcp to fail.

Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

ti-hw-bringup-image: add timestamp service

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

beaglebone-getting-started: update to latest SRCREV

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux-ti335x-psp 3.1: add CAN bus patches

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux-ti335x-psp 3.1: backport some PSP patches, add beaglebone bootlogo

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

gadget-init: minor logic cleanups

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

gadget-init: also package activation symlinks

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

gadget-init: Add network-gadget services and other fixes

* Add rule to start network-gadget when mass storage is ejected
* Add network-gadget-init service and scripts to switch to g_ether
* Add DHCP service / conf
* Update to storage-gadget: rmmod on stop

v2 changes:
* Fix g-ether MAC address by reading from mac_id
* Split into multiple packages

Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

sdcard_image: add dependency on native ext2 utilities

Signed-off-by: Peter A. Bigot <bigotp@acm.org>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux-ti33x-psp 3.1: add custom beaglebone bootlogo

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

cloud9-image: add tar, gdb and gdbserver

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux-omap4: add experimental 3.0.0 version

also clean up stale files

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux-omap4 2.6.35.x: update to glp1.4

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

cloud9-image: add gateone

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

cloud9-image: add hicolor-icon-theme

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

cloud9-image: switch to ntpdate+cron instead of ntpd

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

cloud9-image: add more stuff

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

u-boot 2011.10rc: fatload does not set loadaddr, so be explicit

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

cloud9-image: added ntp

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

u-boot 2011.10rc: uboot extX loading is 20 times slower than vfat loading :(

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

sdcard_image bbclass: reinstate vfat copy of uImage

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

sdcard_image bbclass: switch to vfat layout

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

u-boot 2011.10rc: turn on dcache for beaglebone

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

beaglebone-tester: Update to latest, add quiet option to bootargs

Changes:
* Fix a bug where I was removing g_mass_storage causing the storage-gadget service
to appear to not work

* Add quiet option

Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

cloud9-image: switch beaglebone to ext4

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

u-boot 2011.10rc: move beaglebone to ext4

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

sdcard_image bbclass: add proper ext4 support, fix inode calculations, etc, etc

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

cloud9-image: remove matrix2, it may return when it actually works

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

cloud9-image: add opencv headers and libs

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

sdcard_image bbclass: add ext4 support note

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

matrix-gui: depend on matrix-lighttpd-config

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

matrix-lighttpd-config: enable matrix in lighttpd

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

beaglebone-getting-started: Update Mac driver

This still isn't complete, but I wanted to push the latest Mac drivers
to be certain they are in the next build.

Signed-off-by: Jason Kridner <jdk@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

beaglebone-tester: Update to latest with fixes

  Hopefully the last round of minor fixes:
    * only leds 3 and 4 are touched, 1 and 2 are for system use
    * halt after test fail so that the user doesn't accidentaly corrupt the card
    * remove all usb gadget modules before test start

Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

sdcard_image bbclass: increas inode count again

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

beaglebone getting started: update to latest git

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

cloud9-image: ship led-config

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

U-boot 2011.10rc: Refresh PMIC patch with Rev A1 fixes

Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Acked-by: Tom Rini <trini@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

cloud9-image: include bonescript and beaglebone-getting-started

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

beaglebone-getting-started: update SRCREV for 8.3 fixes

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

bonescript: add runtime dependency for nodejs

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

sdcard_image bbclass: make payload errors non-fatal

sdcard_image bbclass: fix payload logic

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

matrix-gui-submenus: fix license checksum

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

sdcard_image bbclass: add support to copy over payload from rootfs to vfat

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

sdcard_image bbclass: add timestamp to image filename

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

u-boot 2011.10rc: Fix pmic shut down over USB power

These are some fixes suggested by Jason Kridner to fix the PMIC
instabilities we've been seeing over USB power.

Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Cc: Jason Kridner <jdk@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

sdimage_class: eliminate 2GB exception for BeagleBone

Gerald has said his supply of 2GB SD cards for BeagleBone has
gone away, so we are back to 4GB cards.  No more need for this
exeption:

Signed-off-by: Jason Kridner <jdk@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux-ti335x-psp 3.1: shrink beaglebone uImage by 584kiB

Turn on "optimize for size", turn off MTD, enable more FS modules

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux-ti335x-psp 3.1: add missing panel definition

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

matrix-gui: include php.ini in SRC_URI

matrix-gui: fix license after php rewrite

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

matrix-gui 2.0: remove initscript, lighttpd takes care of that now

Also get rid of browser dependency, it's not needed for the server to work

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

matrix: sync with arago

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

bonescript: initial add

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

beaglebone-getting-started: initial add

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux-ti335x-psp 3.1: More modular and comprehensive defconfig for BeagleBone kernel

Networking:
CONFIG_NETFILTER=*   - were enabled as modules in beagle xM
Enabled options for ARP and IP tables as modules for the bone kernel.
CONFIG_NET_SCH=      - networking schedulers, enabled as modules

IR:
Infrared and dongle support, enabled as modules.
Made RFSwitch subsystem as a module

USB:
Added support for usb-serial and miscellaneous devices as modules.

I also used the kernel .config we used for the -xM for comparison purposes.

Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux-ti335x-psp 3.1: Fix gpio1_6 pinmux

This change is required to get GPIO 1_6 working for bone test init purposes
These 2 lines were dropped from the original patch.

Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

beaglebone-tester: Use optargs instead of ip_method on kernel cmdline

Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

Revert "matrix: sync with arago"

No php in meta-oe yet :(

This reverts commit 51a7587cde6e7380181907caee86b2cff678f5b6.

cloud9-image: add screen, git and minicom

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

u-boot 2011.10rc: tweak loadaddress for faster boot

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

matrix: sync with arago

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux-ti335x-psp 3.1: update to latest v3.1-staging branch, fix beaglebone ethernet

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux 3.0: moved to 3.0.8

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

sdcard_image bbclass: raise number of inodes to avoid out of space errors

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

u-boot 2011.10rc: update SRCREV and rediff patches

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

README: update to match setup-scripts instructions

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

xserver-xf86-config: add configs for all SOC_FAMILIES

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

cloud9-gfx-image: add image with cloud9 and X11

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

Revert "sdcard_image: align partitions with flash pages"

This has 2 problems:

1) | Warning: partition 1 does not end at a cylinder boundary
   |
   | sfdisk: I don't like these partitions - nothing changed.

2) CCCCCCCCC on the beaglebone, the ROM code doesn't accept it after fixing 1) with --force

This reverts commit ed09701ebe89d4ce0802cf734aa25c29e94febe8.

linux-ti335x-psp 3.1: hack in DVI support for beaglebone

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

beaglebone-tester: Update with latest fixes

Fixes:
 * 100% CPU usage when no test is running
 * Turn on USB host session before checking for usb-serial device

Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

netbase: follow oe-core update to 4.46

Signed-off-by: Andreas Müller <schnitzeltony@gmx.de>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp: rebase for 3.1 release

* Build-tested on EVM and Bone
* No PR bump, PV is enough

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

README: cleanup, mostly typo and long-line fixing

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

sdcard_image: align partitions with flash pages

* Align partitions for SD card performance/wear optimization. For more
details, please see:
http://sakoman.com/OMAP/a-script-for-partitioningformatting-a-bootable-sdmicrosd-card.html

# Modifications to align partitioning by Steve Sakoman
# based on work by Arnd Bergmann
# Align partitions for SD card performance/wear optimization
# FAT partition size is 131072 sectors (64MB) less:
#       MBR - 1 sector
#       padding to align to the page size of the underlying flash - 127 sectors
# so we start the first partition at sector 128 and make it 131072 - 128 = 130944 sectors
# second partition starts at 131072 and continues to fill the card

Signed-off-by: Jason Kridner <jdk@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

beaglebone-tester: Update to latest, bump PR

Added:
- Output test status to USB serial port
- Made more verbose

Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.1rc8: Enable usb-to-serial drivers

Enable the PL2303 usb-to-serial driver required for serial output
from the beaglebone tester.

Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Acked-by: Jason Kridner <jdk@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp: update defconfigs for am335x-evm

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

ti-hw-bringup-image: don't include speed hacks

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux-ti33x-psp 3.1rc8: Update to latest SRCREV, add EEPROM patches

* Updated to latest SRCREV and bump PR.

Added following patches being submitted to PSP currently:
* EEPROM patches required to get EEPROM working correctly on BBB without
  breaking support for EVM.
* omap_mux_init_signal patch to safe guard against incorrectly setting up pinmux.

Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

sdcard_image bbclass: reinstate uEnv.txt copying

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

beaglebone-tester: Update to latest and bump PR

Added:
* PMIC tests
* EEPROM tests
* Memory tests
* GPIO 38 grounding check

Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux-ti335x-psp 3.1rc8: tree has been rebased, fix SRCREV

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux-ti33x-psp 3.1rc8: use LZO compression for beaglebone to squeeze out some more ms for faster boot

make sure to have 'lzop' installed, no native recipe for that yet

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

sdcard image bbclass: don't copy uEnv.txt for the time being

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

cloud9 image: also ship vimrc

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

signgp: Point S to WORKDIR

This helps in bitbake finding the license files etc.
correctly

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

u-boot 2011.10rc: Read EEPROM header correctly for BeagleBone board detection

This patch fixes the case where the EEPROM is programmed but we still use the
fall back case to detect the bone board. Now that EEPROMs are programmed, we should
correctly detect the bone board instead of relying on fall back to bone mode.

PR bumped

Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

gadget-init: adjust to latest 335x kernel

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux-ti33x-psp 3.1rc8: include latest MUSB code, remove machine ID patches

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

u-boot 2011.10rc: remove beaglebone machine ID patch

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

omap3-sgx-modules: use MACHINE_KERNEL_PR

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

gadget-init: add in latest batch of workarounds

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>