linux-ti335x-psp 3.1: shrink beaglebone uImage by 584kiB

Turn on "optimize for size", turn off MTD, enable more FS modules

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux-ti335x-psp 3.1: add missing panel definition

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

matrix-gui: include php.ini in SRC_URI

matrix-gui: fix license after php rewrite

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

matrix-gui 2.0: remove initscript, lighttpd takes care of that now

Also get rid of browser dependency, it's not needed for the server to work

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

matrix: sync with arago

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

bonescript: initial add

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

beaglebone-getting-started: initial add

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux-ti335x-psp 3.1: More modular and comprehensive defconfig for BeagleBone kernel

Networking:
CONFIG_NETFILTER=*   - were enabled as modules in beagle xM
Enabled options for ARP and IP tables as modules for the bone kernel.
CONFIG_NET_SCH=      - networking schedulers, enabled as modules

IR:
Infrared and dongle support, enabled as modules.
Made RFSwitch subsystem as a module

USB:
Added support for usb-serial and miscellaneous devices as modules.

I also used the kernel .config we used for the -xM for comparison purposes.

Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux-ti335x-psp 3.1: Fix gpio1_6 pinmux

This change is required to get GPIO 1_6 working for bone test init purposes
These 2 lines were dropped from the original patch.

Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

beaglebone-tester: Use optargs instead of ip_method on kernel cmdline

Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

Revert "matrix: sync with arago"

No php in meta-oe yet :(

This reverts commit 51a7587cde6e7380181907caee86b2cff678f5b6.

cloud9-image: add screen, git and minicom

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

u-boot 2011.10rc: tweak loadaddress for faster boot

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

matrix: sync with arago

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux-ti335x-psp 3.1: update to latest v3.1-staging branch, fix beaglebone ethernet

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux 3.0: moved to 3.0.8

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

sdcard_image bbclass: raise number of inodes to avoid out of space errors

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

u-boot 2011.10rc: update SRCREV and rediff patches

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

README: update to match setup-scripts instructions

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

xserver-xf86-config: add configs for all SOC_FAMILIES

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

cloud9-gfx-image: add image with cloud9 and X11

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

Revert "sdcard_image: align partitions with flash pages"

This has 2 problems:

1) | Warning: partition 1 does not end at a cylinder boundary
   |
   | sfdisk: I don't like these partitions - nothing changed.

2) CCCCCCCCC on the beaglebone, the ROM code doesn't accept it after fixing 1) with --force

This reverts commit ed09701ebe89d4ce0802cf734aa25c29e94febe8.

linux-ti335x-psp 3.1: hack in DVI support for beaglebone

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

beaglebone-tester: Update with latest fixes

Fixes:
 * 100% CPU usage when no test is running
 * Turn on USB host session before checking for usb-serial device

Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

netbase: follow oe-core update to 4.46

Signed-off-by: Andreas Müller <schnitzeltony@gmx.de>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp: rebase for 3.1 release

* Build-tested on EVM and Bone
* No PR bump, PV is enough

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

README: cleanup, mostly typo and long-line fixing

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

sdcard_image: align partitions with flash pages

* Align partitions for SD card performance/wear optimization. For more
details, please see:
http://sakoman.com/OMAP/a-script-for-partitioningformatting-a-bootable-sdmicrosd-card.html

# Modifications to align partitioning by Steve Sakoman
# based on work by Arnd Bergmann
# Align partitions for SD card performance/wear optimization
# FAT partition size is 131072 sectors (64MB) less:
#       MBR - 1 sector
#       padding to align to the page size of the underlying flash - 127 sectors
# so we start the first partition at sector 128 and make it 131072 - 128 = 130944 sectors
# second partition starts at 131072 and continues to fill the card

Signed-off-by: Jason Kridner <jdk@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

beaglebone-tester: Update to latest, bump PR

Added:
- Output test status to USB serial port
- Made more verbose

Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp 3.1rc8: Enable usb-to-serial drivers

Enable the PL2303 usb-to-serial driver required for serial output
from the beaglebone tester.

Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Acked-by: Jason Kridner <jdk@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>

linux-ti33x-psp: update defconfigs for am335x-evm

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

ti-hw-bringup-image: don't include speed hacks

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux-ti33x-psp 3.1rc8: Update to latest SRCREV, add EEPROM patches

* Updated to latest SRCREV and bump PR.

Added following patches being submitted to PSP currently:
* EEPROM patches required to get EEPROM working correctly on BBB without
  breaking support for EVM.
* omap_mux_init_signal patch to safe guard against incorrectly setting up pinmux.

Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

sdcard_image bbclass: reinstate uEnv.txt copying

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

beaglebone-tester: Update to latest and bump PR

Added:
* PMIC tests
* EEPROM tests
* Memory tests
* GPIO 38 grounding check

Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux-ti335x-psp 3.1rc8: tree has been rebased, fix SRCREV

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux-ti33x-psp 3.1rc8: use LZO compression for beaglebone to squeeze out some more ms for faster boot

make sure to have 'lzop' installed, no native recipe for that yet

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

sdcard image bbclass: don't copy uEnv.txt for the time being

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

cloud9 image: also ship vimrc

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

signgp: Point S to WORKDIR

This helps in bitbake finding the license files etc.
correctly

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

u-boot 2011.10rc: Read EEPROM header correctly for BeagleBone board detection

This patch fixes the case where the EEPROM is programmed but we still use the
fall back case to detect the bone board. Now that EEPROMs are programmed, we should
correctly detect the bone board instead of relying on fall back to bone mode.

PR bumped

Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

gadget-init: adjust to latest 335x kernel

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux-ti33x-psp 3.1rc8: include latest MUSB code, remove machine ID patches

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

u-boot 2011.10rc: remove beaglebone machine ID patch

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

omap3-sgx-modules: use MACHINE_KERNEL_PR

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

gadget-init: add in latest batch of workarounds

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux-ti33x-psp 3.1rc8: remove MUSB probe order for beaglebone

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

uboot 2011.10rc: rediff RO patch

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

matrix: sync with arago-next

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

u-boot 2011.10rc: update to the latest revision

Updated to latest version to pick up the following changes:
* 9158d7f am335x: Really correct NAND partiton layout
* 4723773 am335x: Wrap spl_board_init in a CONFIG_SPL_BOARD_INIT check
* 40c310c Change CPU to 720MHz and bump VDD1 to 1.26V
* 9c154ee Add missing i2c0 pin mux configuration in spl_board_init

Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

libgles-omap3: adjust INSANE_SKIP to match the new format

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux 3.0: refresh all patches against 3.0.7

This makes 'git am' work again, patch is more forgiving with fuzz.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

README: update

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux-ti33x-psp 3.1rc8: only use one config for beaglebone

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

multi-kernel: the fetcher doesn't support dotfiles anymore, so get rid of the dot

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

beaglebone-tester: Update to latest and bump PR

* Remove usb gadget modules in advance before running the tests
* Merge Koen's patch - check for command line argument using systemd (hardware tests trigger)

Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

sdcard_image bblass: set beaglebone VFAT label to 'BEAGLE_BONE'

sdcard_image: Copy user.txt/uEnv.txt if it exists in /boot

Fixed a bug where the U-boot environment files are not copied to the boot partition if they
were installed in /boot by other recipes.

We should copy the uEnv.txt and user.txt always without placing a condition for the presence
of anything else in /boot. This is the original behavior of sdcard_image before the recent
wave of changes to it.

Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux-ti33x-psp 3.1rc8: Add pin mux and init for beaglebone specific devices

Updated the USER LED patch to include BeagleBone tester specific initialization/code.

Build and run time tested.

Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

ti-hw-bringup-image: ship musb workaround

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

u-boot 2011.10rc: update with latest rev

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux-ti33x-psp 3.1rc8: bump SRCREV, enable RTC for bone

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux 3.0: enable more usb wifi cards for beagleboard, fix write protect pin

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

u-boot 2011.10rc: update with latest rev and new SRC_URI

* Tree moved to arago-project.org
* Remove i2c releated voltage change writes that were a nop

Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux 3.0: move to 3.0.7

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux-ti335x-psp 3.1rc8: add proper machine ID for beaglebone

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

u-boot 2011.10rc: make uboot pass beaglebone machine ID when encountering a valid bone eeprom ID

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

sdcard_image bbclass: make VFAT partition name overridable

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

gadget-init: fix target in the unit files

This only caused issues when manually systemctl disabling and enabling them

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux-ti33x-psp 3.1rc8: fix USB regression for beaglebone, don't disable DEBUGSS clocks on boot

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

gadget-init: add ugly, ugly hack to make USB work on ti33x boards

This is NOT suitable for customers or production.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

u-boot-2011.10rc: update to cover ti33x SOC boards, not just beaglebone

Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux-am335x-joel: delete, superseded by linux-ti33x-psp

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

beaglebone: move to linux-ti33x-psp kernel

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux-ti33x-psp 3.1rc8: sync defconfig with linux-am335x-joel recipe

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

beaglebone: use proper SOC_FAMILY

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

am335x-evm: fix XSERVER content

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

am335x-evm: add machine config with corresponding ti33x SOC_FAMILY

Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux-ti33x-psp: add TI33x PSP kernel with am335x-evm configs

New proper ti33x SOC_FAMILY
Use linux-am33x PSP repository on Arago, aligned with AM-SDK
Use tipspkernel DISTRO_FEATURE to opt out of additional patches over PSP
Original LED patch from Koen was massaged to apply on top
Beaglebone defconfig is from Joel's kernel

Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux-omap: remove unused .inc files

Those were ported from Arago, but never used in meta-ti

Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

u-boot 2011.10rc: move to latest rev, disable d-cache

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

matrix-gui: add missing service file, as spotted by Roger Monk

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux-am335x-joel 3.1: lower gadget power budget, enable usb-test and uas

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

u-boot: switch beagleboard and beaglebone to RO rootfs at boot

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

sdcard_image bbclass: default to 4GiB, but use 2GiB for beaglebone

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

linux-am335x-joel: Enable g_file_storage kernel module

Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

sdcard_image bbclass: move back to 2GB images, clarify LOOPDEV* usage

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

cloud9-image: add beaglebone-tester app

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

beaglebone-tester: A component-based test framework for BeagleBone

Test scripts to be integrated into BeagleBone hardware testing images
and run automatically during boot time to determine if all hardware
components are working correctly.
Auto tests controllable from uEnv.txt which is auto deleted on a test success.
For future use, the individual scripts can be run from /var/lib/bone-tester/component

Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

matrix: merge changes from arago/next/fa8563ae1238c38c779226ebed375c61560c647e

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

ti-hw-bringup-image: Add kernel-modules package

Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

ti-hw-bringup-image: switch to task-ti-test

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

task-ti-test: clean up machine specific bits, inherit allarch

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

u-boot 2011.10rc: raise bootdelay to 1 for the time being

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

u-boot 2010rc: switch to Toms latest branch, rediff env patches

This fixes the boot slowdown regression

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

sdcard_image bblass: all machines load from ext2/ext3 now, remove uImage copying

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

ti-hw-bringup-image: add systemd-speed-hacks

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

cloud9-image: add vim and procps

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

u-boot 2011.10rc: update to latest Joel, rebase Jasons patches

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>