From 7d39ce1743e1a58c51b35f42fb70f9e31a4c8908 Mon Sep 17 00:00:00 2001
From: Koen Kooi <koen@dominion.thruhere.net>
Date: Sun, 2 Jan 2011 16:45:43 +0100
Subject: [PATCH 1/1] BSP: rename beagleboard to TI linux-omap 2.6.37rc: sync
 with OE

---
 conf/layer.conf                               |    10 +
 conf/machine/beagleboard.conf                 |    44 +
 recipes-bsp/linux/files/configs/.empty        |     0
 ...n-EHCI-serial-camera-and-DVI-on-beag.patch |    55 +
 ...omap-Beagle-detect-new-xM-revision-B.patch |    43 +
 ...oard-Add-infrastructure-to-do-fixups.patch |   219 +
 ...oard-pre-export-GPIOs-to-userspace-w.patch |    57 +
 ...0005-modedb.c-add-proper-720p60-mode.patch |    28 +
 ...y-single-block-read-console-messages.patch |    28 +
 ...-MTD-silence-ecc-errors-on-mtdblock0.patch |    63 +
 .../0008-Miracle-patch.patch                  |   504 +
 .../0009-ARM-OMAP-add-omap_rev_-macros.patch  |    81 +
 ...e-hsclk-in-dsi_pll_init-for-OMAP36XX.patch |    31 +
 ...d-add-WIP-support-for-beagleboardtoy.patch |   102 +
 ...911x-return-ENODEV-if-device-is-not-.patch |    29 +
 ...uchscreen-ads7846-return-ENODEV-if-d.patch |    47 +
 ...audio-capture-by-default-for-twl4030.patch |    27 +
 .../0015-MFD-enable-madc-clock.patch          |    51 +
 .../0016-MFD-add-twl4030-madc-driver.patch    |   740 +
 ...AP-Add-twl4030-madc-support-to-Overo.patch |    32 +
 ...P-Add-twl4030-madc-support-to-Beagle.patch |    35 +
 ...pport-for-Samsung-LTE430WQ-F0C-panel.patch |   173 +
 ...upport-for-LG-Philips-LB035Q02-panel.patch |   299 +
 ...otarg-for-selecting-svideo-or-compos.patch |    75 +
 ...l4030-move-clock-input-selection-pri.patch |    39 +
 ...-support-for-backup-battery-recharge.patch |    55 +
 ...ically-set-musb-mode-in-platform-dat.patch |    49 +
 ...for-both-cpu-type-and-revision-rathe.patch |    34 +
 ...OMAP-DSS2-Add-DSS2-support-for-Overo.patch |   355 +
 ...et-config-options-in-GPMC-per-CS-con.patch |    80 +
 ...-dma.c-to-set-address-and-length-for.patch |    83 +
 ...d-driver-for-USRP-Embedded-FPGA-inte.patch |  1889 +
 .../linux-omap-2.6.37rc/beagleboard/defconfig |  3373 +
 .../beagleboard/logo_linux_clut224.ppm        | 73147 ++++++++++++++++
 .../omap3-touchbook/defconfig                 |     1 +
 .../linux-omap-2.6.37rc/omap3evm/defconfig    |     1 +
 .../linux/linux-omap-2.6.37rc/overo/defconfig |     1 +
 .../linux-omap-2.6.37rc/usrp-e1xx/defconfig   |     1 +
 ...eBoard-Adjust-USER-button-pin-for-xM.patch |    28 +
 ...omap3-beagle-Fix-compile-time-errors.patch |    67 +
 ...book-make-it-build-against-TI-linux-.patch |    61 +
 ...port-for-TCT-Zippy-to-Beagle-board-f.patch |   135 +
 ...ake-beagle-u-boot-partition-writable.patch |    24 +
 ...-board-omap3-beagle-add-DSS2-support.patch |   200 +
 ...e-prepare-for-DM3730-based-Beagleboa.patch |   103 +
 ...oard-Add-infrastructure-to-do-fixups.patch |   172 +
 ...oard-pre-export-GPIOs-to-userspace-w.patch |    57 +
 ...oard-initialize-ds1307-and-eeprom-on.patch |    76 +
 ...RM-OMAP-update-beagleboard-defconfig.patch |  3323 +
 ...audio-capture-by-default-for-twl4030.patch |    27 +
 ...roper-fix-for-subpage-read-ECC-error.patch |    35 +
 ...-Enable-Pre-Multiplied-Alpha-Support.patch |    44 +
 ...-for-selecting-svideo-or-composite-f.patch |    75 +
 ...some-more-from-Leopard-imaging-patch.patch |   133 +
 ...Add-support-for-second-ethernet-port.patch |   110 +
 ...911x-return-ENODEV-if-device-is-not-.patch |    29 +
 ...uchscreen-ads7846-return-ENODEV-if-d.patch |    53 +
 ...-drivers-mfd-add-twl4030-madc-driver.patch |   601 +
 ...Add-missing-twl4030-madc-header-file.patch |   149 +
 ...AP-Add-twl4030-madc-support-to-Overo.patch |    32 +
 ...P-Add-twl4030-madc-support-to-Beagle.patch |    35 +
 ...dd-vendor-device-ID-for-Ceiva-Wirele.patch |    25 +
 ...y-single-block-read-console-messages.patch |    28 +
 ...l4030-move-clock-input-selection-pri.patch |    47 +
 ...PM-code-and-sync-with-http-www.sakom.patch |   373 +
 ...c-adjust-for-twl4030-twl-api-changes.patch |    85 +
 ...-support-for-Samsung-lte430wq-f0c-pa.patch |   161 +
 ...upport-for-LG-Philips-LB035Q02-panel.patch |   254 +
 ...h-which-improves-SD-card-s-peformanc.patch |    32 +
 ...ort-to-sync-the-VFP-state-of-the-cur.patch |   109 +
 ...-the-HW-context-when-calling-signal-.patch |   211 +
 ...-clocks-to-200MHz-on-DM37xx-OMAP36xx.patch |    27 +
 ...0034-modedb.c-add-proper-720p60-mode.patch |    27 +
 ...-support-for-backup-battery-recharge.patch |    55 +
 ...Add-prompt-for-CONFIG_ALIGNMENT_TRAP.patch |    29 +
 ...ing-on-alignment-trap-in-kernel-mode.patch |    31 +
 ...some-CPU-control-registers-via-sysfs.patch |   202 +
 ...option-to-allow-userspace-PLE-access.patch |    48 +
 ...o-allow-userspace-access-to-performa.patch |    49 +
 ...se-some-PMON-registers-through-sysfs.patch |    41 +
 ...-allow-host-io-without-gadget-module.patch |    90 +
 ...-MTD-silence-ecc-errors-on-mtdblock0.patch |    59 +
 ...every-known-beagle-except-revB-uses-.patch |    34 +
 ...add-support-for-beagleFPGA-expansion.patch |    70 +
 ...rial-console-corruption-during-cpuid.patch |    57 +
 ...ry-to-idle-IVA-subsys-when-CONFIG_PM.patch |    37 +
 ...ACK-try-to-poweron-stuff-on-xM-rev-A.patch |    60 +
 .../am3517-evm/defconfig                      |  2140 +
 .../linux-omap-psp-2.6.32/am37x-evm/defconfig |  2024 +
 .../beagleboard/configs/cpuidle               |  3053 +
 .../beagleboard/configs/cpuidle-gether        |  3051 +
 .../beagleboard/defconfig                     |  3053 +
 .../beagleboard/logo_linux_clut224.ppm        | 73147 ++++++++++++++++
 ...ab-at-merging-sensor-driver-based-on.patch |  2394 +
 ...02-mt9t111-Fix-all-checkpatch-errors.patch |   398 +
 ...03-mt9t111-Pass-v4l2_int_device-data.patch |    40 +
 .../0004-omap3beagle-Add-camera-support.patch |   352 +
 ...EMP-omap3beagle-camera-Add-defconfig.patch |  3070 +
 ...le-camera-Add-support-for-regulators.patch |   238 +
 ...TEMP-omap3beagle-cam-Enable-OMAP_MUX.patch |    37 +
 ...-camera-Fix-null-pointer-dereference.patch |    54 +
 ...TEMP-omap3beagle-cam-Enable-OMAP_MUX.patch |    42 +
 ...gle-camera-Change-arch-late_initcall.patch |    25 +
 ...ra-Move-i2c-registration-to-the-main.patch |   107 +
 ...amera-code-build-if-MT9T111-is-built.patch |    38 +
 ...agle-camera-Force-mode0-in-cam_xclka.patch |    41 +
 ...capability-to-change-rate-of-dpll4_m.patch |    33 +
 ...p3beagle-camera-Force-mode0-in-cam_x.patch |    41 +
 ...gle-camera-Fix-wrong-XCLKA-selection.patch |    30 +
 ..._MCLK-to-172.8-MHz-allows-exact-9.6-.patch |    91 +
 ...Moved-MCLK-setting-to-the-board-file.patch |   209 +
 ...map3isp-core-Do-smarter-MCLK-setting.patch |    47 +
 ...p3beagle-camera-set-mclk-for-mt9t111.patch |    36 +
 .../0021-mt9t111-Fix-max-supported-xclk.patch |    28 +
 ...agle-camera-Clarify-regulators-names.patch |   103 +
 ...p3beagle-camera-Fix-powerup-sequence.patch |   103 +
 ...p3beagle-camera-Change-vaux4-to-1.8v.patch |    32 +
 ...ra-Rename-regulators-to-match-actual.patch |   110 +
 ...ra-Complement-remainig-sensor-hw-con.patch |    37 +
 ...ct-function-retval-and-cleanup-print.patch |    48 +
 ...era-Set-padconf-settings-in-cam-init.patch |    66 +
 ...ra-only-register-camera-driver-for-3.patch |    31 +
 ...rk-in-progress-for-camera-enablement.patch |    53 +
 ...m-Add-support-for-MT9V113-VGA-Sensor.patch |  2441 +
 ...13-Fixed-sensor-nitialization-issues.patch |   294 +
 ...0033-mt9v113-Fix-wrong-active-widths.patch |    29 +
 ...ng-check-on-non-interlaced-sensor-on.patch |    34 +
 ...bad-YUV_BT-checks-in-datapath_config.patch |    45 +
 ...-vd_pol-to-0-by-default-on-all-cases.patch |    35 +
 ...cdc-Set-datalines-to-10-for-YUV_SYNC.patch |    29 +
 ...gle-camera-Fix-parallel-i-f-settings.patch |    43 +
 ...ra-Clean-up-Remove-unneccessary-code.patch |   118 +
 ...n-Up-Remove-unneccessary-code-printf.patch |   390 +
 ...ax-clk-input-changed-as-per-the-spec.patch |    54 +
 ...3beagle-camera-Further-clode-cleanup.patch |   237 +
 ...ngs-from-Aptima-used-to-increase-FPS.patch |   135 +
 ...9v113-AE-param-tuned-to-get-28-30FPS.patch |    33 +
 ...p3beagle-camera-Cleanup-of-boardfile.patch |   161 +
 ...eagle-camera-Cleanup-regulator-usage.patch |   172 +
 ...le-camera-Bring-back-mt9t111-support.patch |   251 +
 ...VE-v4l2-Delete-MT9T111-sensor-driver.patch |  2402 +
 ...soc-camera-Add-mt9t112-camera-driver.patch |  1285 +
 ...12-modify-exiting-conditions-from-st.patch |    31 +
 ...e-from-soc_camera-to-v4l2-int-device.patch |   934 +
 ...9t112-Add-more-info-to-public-header.patch |    29 +
 ...-mt9t112-Fix-null-pointer-kernel-bug.patch |    84 +
 ...omap3beagle-Add-MT9T112-to-defconfig.patch |    26 +
 ...ra-Change-MT9T111-references-to-new-.patch |   207 +
 ...m-Fix-multi-pixel-format-negotiation.patch |    26 +
 ...le-camera-Bring-back-mt9t111-support.patch |    43 +
 ...mt9t112-Do-init_camera-every-powerup.patch |    57 +
 ...camera-Switch-flag-for-no-sensor-ISP.patch |    26 +
 .../0060-mt9t112-Add-back-3MP-basesize.patch  |    37 +
 ...-Prepare-for-24MHz-EXTCLK-and-30-fps.patch |    63 +
 ...amera-Prepare-24MHz-xclk-for-mt9t112.patch |    62 +
 ...register-settings-for-mt9t111-sensor.patch |   109 +
 ...-mt9t112-Remove-smart-size-selection.patch |   188 +
 ...-bogus-Kconfig-depend-on-PCI-and-add.patch |    38 +
 ...d-Context-selection-to-configuration.patch |    96 +
 ...67-mt9t112-Disable-JPEG-in-Context-B.patch |    32 +
 ...ke-context-B-stream-unlimited-frames.patch |    30 +
 ...9t112-Fix-pll-p-dividers-abstraction.patch |    58 +
 ...2-Adjust-50-60Hz-flickering-settings.patch |    51 +
 ...autofocus-at-the-end-of-context-swit.patch |    35 +
 ...-camera-Fix-dual-sensor-registration.patch |    43 +
 ...-mt9v113-Fix-State-variable-handling.patch |    68 +
 ...-sensor-rest-to-after-applying-power.patch |    65 +
 .../0075-omap3beagle-Add-camera-bootarg.patch |   108 +
 .../linux-omap-psp-2.6.32/dm37x-evm/defconfig |  2024 +
 ...01-ARM-OMAP-add-spi-platform-devices.patch |    62 +
 .../0002-MMA7455L-accelerometer-driver.patch  |   683 +
 ..._battery-remove-error-message-output.patch |    53 +
 ...004-bq27x00_battery-add-charged-gpio.patch |    65 +
 .../0005-adf7846-add-more-debugging.patch     |    99 +
 ...-ads7846-read-max-mix-x-y-from-pdata.patch |    35 +
 ...-ads7846-add-settling-delay-to-pdata.patch |    59 +
 ...slate-X-Y-coordinates-for-the-video-.patch |    99 +
 ...-checks-when-rotation-is-90-or-270-d.patch |    52 +
 .../0010-add-touchbook-hid-driver.patch       |   339 +
 ...cklight-controls-accessible-to-users.patch |    25 +
 ...ror-out-when-there-s-no-pendown-gpio.patch |    30 +
 ...-ASoC-add-driver-for-omap3-touchbook.patch |   350 +
 .../0014-backlight-add-PWM-support.patch      |   126 +
 ...4030-BCI-driver-from-2.6.29-to-2.6.3.patch |  1367 +
 ...MAP-omap3-touchbook-update-boardfile.patch |   620 +
 ...add-800MHz-OPP-and-remove-125MHz-one.patch |    48 +
 .../omap3-touchbook/defconfig                 |  3043 +
 .../linux-omap-psp-2.6.32/omap3evm/defconfig  |  3088 +
 .../linux-omap-psp-2.6.32/overo/defconfig     |  2467 +
 .../linux/linux-omap-psp-2.6.32/porches.patch |    55 +
 recipes-bsp/linux/linux-omap-psp_2.6.32.bb    |   176 +
 recipes-bsp/linux/linux-omap.inc              |     7 +
 recipes-bsp/linux/linux-omap3.inc             |    16 +
 recipes-bsp/linux/linux-omap_2.6.37rc.bb      |    57 +
 recipes-bsp/linux/linux.inc                   |   257 +
 recipes-bsp/linux/multi-kernel.inc            |    97 +
 recipes-bsp/u-boot/u-boot.inc                 |    67 +
 ...-BeagleBoard-move-ramdisk-parameters.patch |    38 +
 ...upport-for-second-and-third-mmc-chan.patch |   126 +
 ...nable-support-for-second-and-third-m.patch |    56 +
 ...c-bus-switching-for-Beagle-and-Overo.patch |    49 +
 ...d-board-revision-detection-for-Overo.patch |   187 +
 ...gle-revision-detection-to-recognize-.patch |   165 +
 ...to-1.8V-for-EHCI-PHY-on-Beagle-Rev-C.patch |   143 +
 ...for-rev-3.1.2-check-and-display-max-.patch |   105 +
 ...purate-boot-arg-for-overo-and-beagle.patch |    70 +
 ...ansion-board-type-version-using-eepr.patch |   129 +
 ...le-config-eeprom-to-set-u-boot-env-v.patch |    81 +
 ...le-input-on-MMC1_CLK-and-MMC3_CLK-pi.patch |    34 +
 ...o-set-CONFIG_SYS_I2C_SPEED-to-400Khz.patch |    25 +
 ...xcessively-long-delays-in-i2c-driver.patch |    52 +
 ...w-expansion-boards-with-any-vendor-I.patch |    47 +
 ...ge-address-of-expansion-eeprom-to-0x.patch |    25 +
 ...n-t-attempt-to-set-up-second-RAM-ban.patch |    49 +
 ...015-OMAP3-mem.c-enhance-the-RAM-test.patch |    52 +
 ...ail-gracefully-if-no-nand-is-present.patch |    27 +
 ...tions-to-support-sysinfo-cpu-and-cpu.patch |    68 +
 ...o-update-cpu-detection-for-36XX-37XX.patch |   196 +
 ...cks-update-clock-setup-for-36XX-37XX.patch |   826 +
 ...AP3-beagle-add-support-for-Beagle-xM.patch |   137 +
 ...ro-remove-omapfb.debug-y-from-defaul.patch |    53 +
 ...lement-expansionboard-detection-base.patch |   157 +
 ...lay-message-about-I2C-errors-being-e.patch |    26 +
 ...agleboard-fix-TCT-expansionboard-IDs.patch |    27 +
 .../0025-Add-DSS-driver-for-OMAP3.patch       |   353 +
 .../0026-Enable-DSS-driver-for-Beagle.patch   |   158 +
 ...-don-t-set-mpurate-on-xM-in-bootargs.patch |    24 +
 ...ean-up-L2-cache-enable-disable-funct.patch |   112 +
 ...MAP3-convert-setup_auxcr-to-pure-asm.patch |    99 +
 ...ex-A8-errata-workarounds-only-on-aff.patch |    46 +
 ...-more-expansionboards-based-on-http-.patch |    61 +
 ...-mpurate-to-600-for-revB-and-revC1-3.patch |    29 +
 ...rettify-expansionboard-message-a-bit.patch |    25 +
 ...-pinmux-for-Tincantools-Trainer-expa.patch |    53 +
 ...P3-Beagle-set-mpurate-to-1000-for-xM.patch |    24 +
 ...rease-bootdelay-to-3-use-VGA-for-def.patch |    34 +
 ...pass-expansionboard-name-in-bootargs.patch |    87 +
 ...ed-configurations-for-xM-Rev-A-board.patch |    29 +
 .../0038-BeagleBoard-Added-LED-driver.patch   |   164 +
 .../u-boot/u-boot/0039-Add-led-command.patch  |   256 +
 ...env-beaglerev-for-AxBx-Cx-xMA-for-be.patch |    42 +
 .../0041-BeagleBoard-Enabled-LEDs.patch       |    47 +
 ...ew-command-for-status-of-USER-button.patch |    97 +
 ...Board-Add-CONFIG_SYS_MEMTEST_SCRATCH.patch |    35 +
 .../u-boot/0044-Beagleboard-Adjust-boot.patch |   115 +
 ...5-BeagleBoard-Enable-pullups-on-i2c2.patch |    46 +
 ...Board-Add-camera-to-default-bootargs.patch |    50 +
 recipes-bsp/u-boot/u-boot/fw_env.config       |     8 +
 recipes-bsp/u-boot/u-boot_git.bb              |    62 +
 recipes-bsp/x-load/signgp.bb                  |    19 +
 recipes-bsp/x-load/signgp/signGP.c            |   108 +
 ...47fcbc54ecc7a75f9ad45a31042a04d8a2ce.patch |    35 +
 recipes-bsp/x-load/x-load-git/name.patch      |    13 +
 recipes-bsp/x-load/x-load-git/xm-mem.patch    |   237 +
 recipes-bsp/x-load/x-load.inc                 |    57 +
 recipes-bsp/x-load/x-load_git.bb              |    22 +
 256 files changed, 215790 insertions(+)
 create mode 100644 conf/layer.conf
 create mode 100644 conf/machine/beagleboard.conf
 create mode 100644 recipes-bsp/linux/files/configs/.empty
 create mode 100644 recipes-bsp/linux/linux-omap-2.6.37rc/0001-ARM-OMAP-Power-on-EHCI-serial-camera-and-DVI-on-beag.patch
 create mode 100644 recipes-bsp/linux/linux-omap-2.6.37rc/0002-omap-Beagle-detect-new-xM-revision-B.patch
 create mode 100644 recipes-bsp/linux/linux-omap-2.6.37rc/0003-ARM-OMAP-beagleboard-Add-infrastructure-to-do-fixups.patch
 create mode 100644 recipes-bsp/linux/linux-omap-2.6.37rc/0004-ARM-OMAP-beagleboard-pre-export-GPIOs-to-userspace-w.patch
 create mode 100644 recipes-bsp/linux/linux-omap-2.6.37rc/0005-modedb.c-add-proper-720p60-mode.patch
 create mode 100644 recipes-bsp/linux/linux-omap-2.6.37rc/0006-mmc-don-t-display-single-block-read-console-messages.patch
 create mode 100644 recipes-bsp/linux/linux-omap-2.6.37rc/0007-MTD-silence-ecc-errors-on-mtdblock0.patch
 create mode 100644 recipes-bsp/linux/linux-omap-2.6.37rc/0008-Miracle-patch.patch
 create mode 100644 recipes-bsp/linux/linux-omap-2.6.37rc/0009-ARM-OMAP-add-omap_rev_-macros.patch
 create mode 100644 recipes-bsp/linux/linux-omap-2.6.37rc/0010-OMAP-DSS2-enable-hsclk-in-dsi_pll_init-for-OMAP36XX.patch
 create mode 100644 recipes-bsp/linux/linux-omap-2.6.37rc/0011-omap3-beagleboard-add-WIP-support-for-beagleboardtoy.patch
 create mode 100644 recipes-bsp/linux/linux-omap-2.6.37rc/0012-drivers-net-smsc911x-return-ENODEV-if-device-is-not-.patch
 create mode 100644 recipes-bsp/linux/linux-omap-2.6.37rc/0013-drivers-input-touchscreen-ads7846-return-ENODEV-if-d.patch
 create mode 100644 recipes-bsp/linux/linux-omap-2.6.37rc/0014-ASoC-enable-audio-capture-by-default-for-twl4030.patch
 create mode 100644 recipes-bsp/linux/linux-omap-2.6.37rc/0015-MFD-enable-madc-clock.patch
 create mode 100644 recipes-bsp/linux/linux-omap-2.6.37rc/0016-MFD-add-twl4030-madc-driver.patch
 create mode 100644 recipes-bsp/linux/linux-omap-2.6.37rc/0017-ARM-OMAP-Add-twl4030-madc-support-to-Overo.patch
 create mode 100644 recipes-bsp/linux/linux-omap-2.6.37rc/0018-ARM-OMAP-Add-twl4030-madc-support-to-Beagle.patch
 create mode 100644 recipes-bsp/linux/linux-omap-2.6.37rc/0019-OMAP-DSS2-Add-support-for-Samsung-LTE430WQ-F0C-panel.patch
 create mode 100644 recipes-bsp/linux/linux-omap-2.6.37rc/0020-OMAP-DSS2-Add-support-for-LG-Philips-LB035Q02-panel.patch
 create mode 100644 recipes-bsp/linux/linux-omap-2.6.37rc/0021-OMAP-DSS2-add-bootarg-for-selecting-svideo-or-compos.patch
 create mode 100644 recipes-bsp/linux/linux-omap-2.6.37rc/0022-ARM-OMAP2-mmc-twl4030-move-clock-input-selection-pri.patch
 create mode 100644 recipes-bsp/linux/linux-omap-2.6.37rc/0023-RTC-add-support-for-backup-battery-recharge.patch
 create mode 100644 recipes-bsp/linux/linux-omap-2.6.37rc/0024-ARM-OMAP-automatically-set-musb-mode-in-platform-dat.patch
 create mode 100644 recipes-bsp/linux/linux-omap-2.6.37rc/0025-OMAP-DSS2-check-for-both-cpu-type-and-revision-rathe.patch
 create mode 100644 recipes-bsp/linux/linux-omap-2.6.37rc/0026-OMAP-DSS2-Add-DSS2-support-for-Overo.patch
 create mode 100644 recipes-bsp/linux/linux-omap-2.6.37rc/0027-Add-defines-to-set-config-options-in-GPMC-per-CS-con.patch
 create mode 100644 recipes-bsp/linux/linux-omap-2.6.37rc/0028-Add-functions-to-dma.c-to-set-address-and-length-for.patch
 create mode 100644 recipes-bsp/linux/linux-omap-2.6.37rc/0029-usrp-embedded-Add-driver-for-USRP-Embedded-FPGA-inte.patch
 create mode 100644 recipes-bsp/linux/linux-omap-2.6.37rc/beagleboard/defconfig
 create mode 100644 recipes-bsp/linux/linux-omap-2.6.37rc/beagleboard/logo_linux_clut224.ppm
 create mode 120000 recipes-bsp/linux/linux-omap-2.6.37rc/omap3-touchbook/defconfig
 create mode 120000 recipes-bsp/linux/linux-omap-2.6.37rc/omap3evm/defconfig
 create mode 120000 recipes-bsp/linux/linux-omap-2.6.37rc/overo/defconfig
 create mode 120000 recipes-bsp/linux/linux-omap-2.6.37rc/usrp-e1xx/defconfig
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0001-BeagleBoard-Adjust-USER-button-pin-for-xM.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0001-Revert-omap3-beagle-Fix-compile-time-errors.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0002-board-omap3touchbook-make-it-build-against-TI-linux-.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0003-ARM-OMAP-add-support-for-TCT-Zippy-to-Beagle-board-f.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0004-ARM-OMAP-Make-beagle-u-boot-partition-writable.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0005-board-omap3-beagle-add-DSS2-support.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0006-board-omap3beagle-prepare-for-DM3730-based-Beagleboa.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0007-ARM-OMAP-beagleboard-Add-infrastructure-to-do-fixups.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0008-ARM-OMAP-beagleboard-pre-export-GPIOs-to-userspace-w.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0009-ARM-OMAP-beagleboard-initialize-ds1307-and-eeprom-on.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0010-ARM-OMAP-update-beagleboard-defconfig.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0011-ASoC-enable-audio-capture-by-default-for-twl4030.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0012-MTD-NAND-omap2-proper-fix-for-subpage-read-ECC-error.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0013-OMAP3630-DSS2-Enable-Pre-Multiplied-Alpha-Support.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0014-DSS2-add-bootarg-for-selecting-svideo-or-composite-f.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0015-ISP-add-some-more-from-Leopard-imaging-patch.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0016-ARM-OMAP-Overo-Add-support-for-second-ethernet-port.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0017-drivers-net-smsc911x-return-ENODEV-if-device-is-not-.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0018-drivers-input-touchscreen-ads7846-return-ENODEV-if-d.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0019-drivers-mfd-add-twl4030-madc-driver.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0020-ARM-OMAP-Add-missing-twl4030-madc-header-file.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0021-ARM-OMAP-Add-twl4030-madc-support-to-Overo.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0022-ARM-OMAP-Add-twl4030-madc-support-to-Beagle.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0023-netdev-rt73usb-add-vendor-device-ID-for-Ceiva-Wirele.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0024-mmc-don-t-display-single-block-read-console-messages.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0025-ARM-OMAP2-mmc-twl4030-move-clock-input-selection-pri.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0026-board-overo-add-PM-code-and-sync-with-http-www.sakom.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0027-twl4030-madc-adjust-for-twl4030-twl-api-changes.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0028-OMAP-DSS2-Re-add-support-for-Samsung-lte430wq-f0c-pa.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0029-OMAP-DSS2-Add-support-for-LG-Philips-LB035Q02-panel.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0030-Fix-for-bus-width-which-improves-SD-card-s-peformanc.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0031-ARM-VFP-add-support-to-sync-the-VFP-state-of-the-cur.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0032-ARM-VFP-preserve-the-HW-context-when-calling-signal-.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0033-Switch-SGX-clocks-to-200MHz-on-DM37xx-OMAP36xx.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0034-modedb.c-add-proper-720p60-mode.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0035-RTC-add-support-for-backup-battery-recharge.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0036-ARM-Add-prompt-for-CONFIG_ALIGNMENT_TRAP.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0037-ARM-Print-warning-on-alignment-trap-in-kernel-mode.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0038-ARM-Expose-some-CPU-control-registers-via-sysfs.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0039-ARM-Add-option-to-allow-userspace-PLE-access.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0040-ARM-Add-option-to-allow-userspace-access-to-performa.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0041-ARM-Expose-some-PMON-registers-through-sysfs.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0042-musb-allow-host-io-without-gadget-module.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0043-MTD-silence-ecc-errors-on-mtdblock0.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0044-ARM-OMAP-beagle-every-known-beagle-except-revB-uses-.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0045-ARM-OMAP-beagle-add-support-for-beagleFPGA-expansion.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0046-attemp-to-fix-serial-console-corruption-during-cpuid.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0047-clock34xx-only-try-to-idle-IVA-subsys-when-CONFIG_PM.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/0048-HACK-try-to-poweron-stuff-on-xM-rev-A.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/am3517-evm/defconfig
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/am37x-evm/defconfig
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/beagleboard/configs/cpuidle
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/beagleboard/configs/cpuidle-gether
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/beagleboard/defconfig
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/beagleboard/logo_linux_clut224.ppm
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0001-mt9t111-first-stab-at-merging-sensor-driver-based-on.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0002-mt9t111-Fix-all-checkpatch-errors.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0003-mt9t111-Pass-v4l2_int_device-data.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0004-omap3beagle-Add-camera-support.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0005-TEMP-omap3beagle-camera-Add-defconfig.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0006-omap3beagle-camera-Add-support-for-regulators.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0007-TEMP-omap3beagle-cam-Enable-OMAP_MUX.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0008-omap3beagle-camera-Fix-null-pointer-dereference.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0009-Revert-TEMP-omap3beagle-cam-Enable-OMAP_MUX.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0010-omap3beagle-camera-Change-arch-late_initcall.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0011-omap3beagle-camera-Move-i2c-registration-to-the-main.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0012-ARM-OMAP3-make-camera-code-build-if-MT9T111-is-built.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0013-DEBUG-omap3beagle-camera-Force-mode0-in-cam_xclka.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0014-OMAP3-CLOCK-Add-capability-to-change-rate-of-dpll4_m.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0015-Revert-DEBUG-omap3beagle-camera-Force-mode0-in-cam_x.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0016-omap3beagle-camera-Fix-wrong-XCLKA-selection.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0017-omap3isp-set-CAM_MCLK-to-172.8-MHz-allows-exact-9.6-.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0018-Fix-Moved-MCLK-setting-to-the-board-file.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0019-omap3isp-core-Do-smarter-MCLK-setting.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0020-omap3beagle-camera-set-mclk-for-mt9t111.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0021-mt9t111-Fix-max-supported-xclk.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0022-omap3beagle-camera-Clarify-regulators-names.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0023-omap3beagle-camera-Fix-powerup-sequence.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0024-omap3beagle-camera-Change-vaux4-to-1.8v.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0025-omap3beagle-camera-Rename-regulators-to-match-actual.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0026-omap3beagle-camera-Complement-remainig-sensor-hw-con.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0027-mt9t111-Fix-detect-function-retval-and-cleanup-print.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0028-omap3beagle-camera-Set-padconf-settings-in-cam-init.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0029-omap3beagle-camera-only-register-camera-driver-for-3.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0030-WIP-mt9t111-Work-in-progress-for-camera-enablement.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0031-BeagleXM-Cam-Add-support-for-MT9V113-VGA-Sensor.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0032-MT9V113-Fixed-sensor-nitialization-issues.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0033-mt9v113-Fix-wrong-active-widths.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0034-omap3isp-Fix-Wrong-check-on-non-interlaced-sensor-on.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0035-omap3isp-Fix-bad-YUV_BT-checks-in-datapath_config.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0036-omap3isp-Set-vd_pol-to-0-by-default-on-all-cases.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0037-omap3isp-ccdc-Set-datalines-to-10-for-YUV_SYNC.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0038-omap3beagle-camera-Fix-parallel-i-f-settings.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0039-omap3beagle-camera-Clean-up-Remove-unneccessary-code.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0040-mt9v113-Clean-Up-Remove-unneccessary-code-printf.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0041-MT9V113-Min-Max-clk-input-changed-as-per-the-spec.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0042-omap3beagle-camera-Further-clode-cleanup.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0043-mt9v113-Settings-from-Aptima-used-to-increase-FPS.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0044-mt9v113-AE-param-tuned-to-get-28-30FPS.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0045-omap3beagle-camera-Cleanup-of-boardfile.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0046-omap3beagle-camera-Cleanup-regulator-usage.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0047-omap3beagle-camera-Bring-back-mt9t111-support.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0048-REMOVE-v4l2-Delete-MT9T111-sensor-driver.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0049-V4L-DVB-13670-soc-camera-Add-mt9t112-camera-driver.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0050-soc-camera-mt9t112-modify-exiting-conditions-from-st.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0051-mt9t112-Migrate-from-soc_camera-to-v4l2-int-device.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0052-mt9t112-Add-more-info-to-public-header.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0053-mt9t112-Fix-null-pointer-kernel-bug.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0054-DEBUG-omap3beagle-Add-MT9T112-to-defconfig.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0055-omap3beagle-camera-Change-MT9T111-references-to-new-.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0056-omap34xxcam-Fix-multi-pixel-format-negotiation.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0057-SQUASH-omap3beagle-camera-Bring-back-mt9t111-support.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0058-mt9t112-Do-init_camera-every-powerup.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0059-omap3beagle-camera-Switch-flag-for-no-sensor-ISP.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0060-mt9t112-Add-back-3MP-basesize.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0061-mt9t112-Prepare-for-24MHz-EXTCLK-and-30-fps.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0062-omap3beagle-camera-Prepare-24MHz-xclk-for-mt9t112.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0063-mt9t112-Correct-register-settings-for-mt9t111-sensor.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0064-mt9t112-Remove-smart-size-selection.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0065-rtl8192su-remove-bogus-Kconfig-depend-on-PCI-and-add.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0066-mt9t112-Add-Context-selection-to-configuration.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0067-mt9t112-Disable-JPEG-in-Context-B.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0068-mt9t112-Make-context-B-stream-unlimited-frames.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0069-mt9t112-Fix-pll-p-dividers-abstraction.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0070-mt9t112-Adjust-50-60Hz-flickering-settings.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0071-mt9t112-Trigger-autofocus-at-the-end-of-context-swit.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0072-omap3beagle-camera-Fix-dual-sensor-registration.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0073-mt9v113-Fix-State-variable-handling.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0074-Move-sensor-rest-to-after-applying-power.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0075-omap3beagle-Add-camera-bootarg.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/dm37x-evm/defconfig
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0001-ARM-OMAP-add-spi-platform-devices.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0002-MMA7455L-accelerometer-driver.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0003-bq27x00_battery-remove-error-message-output.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0004-bq27x00_battery-add-charged-gpio.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0005-adf7846-add-more-debugging.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0006-ads7846-read-max-mix-x-y-from-pdata.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0007-ads7846-add-settling-delay-to-pdata.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0008-DSS2-OMAPFB-Translate-X-Y-coordinates-for-the-video-.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0009-DSS2-Fix-scaling-checks-when-rotation-is-90-or-270-d.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0010-add-touchbook-hid-driver.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0011-Make-backlight-controls-accessible-to-users.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0012-ads7846-don-t-error-out-when-there-s-no-pendown-gpio.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0013-ASoC-add-driver-for-omap3-touchbook.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0014-backlight-add-PWM-support.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0015-Forward-port-TWL4030-BCI-driver-from-2.6.29-to-2.6.3.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0016-ARM-OMAP-omap3-touchbook-update-boardfile.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0017-ARM-OMAP-add-800MHz-OPP-and-remove-125MHz-one.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/defconfig
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/omap3evm/defconfig
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/overo/defconfig
 create mode 100644 recipes-bsp/linux/linux-omap-psp-2.6.32/porches.patch
 create mode 100644 recipes-bsp/linux/linux-omap-psp_2.6.32.bb
 create mode 100644 recipes-bsp/linux/linux-omap.inc
 create mode 100644 recipes-bsp/linux/linux-omap3.inc
 create mode 100644 recipes-bsp/linux/linux-omap_2.6.37rc.bb
 create mode 100644 recipes-bsp/linux/linux.inc
 create mode 100644 recipes-bsp/linux/multi-kernel.inc
 create mode 100644 recipes-bsp/u-boot/u-boot.inc
 create mode 100644 recipes-bsp/u-boot/u-boot/0001-BeagleBoard-move-ramdisk-parameters.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0001-OMAP-mmc-add-support-for-second-and-third-mmc-chan.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0001-OMAP3-Beagle-enable-support-for-second-and-third-m.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0001-OMAP3-enable-i2c-bus-switching-for-Beagle-and-Overo.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0002-OMAP3-add-board-revision-detection-for-Overo.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0003-OMAP3-update-Beagle-revision-detection-to-recognize-.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0004-OMAP3-Set-VAUX2-to-1.8V-for-EHCI-PHY-on-Beagle-Rev-C.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0005-OMAP3-add-entry-for-rev-3.1.2-check-and-display-max-.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0006-OMAP3-add-mpurate-boot-arg-for-overo-and-beagle.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0007-OMAP3-detect-expansion-board-type-version-using-eepr.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0008-OMAP3-Overo-enable-config-eeprom-to-set-u-boot-env-v.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0009-OMAP3-Overo-enable-input-on-MMC1_CLK-and-MMC3_CLK-pi.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0010-OMAP3-Overo-set-CONFIG_SYS_I2C_SPEED-to-400Khz.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0011-OMAP3-trim-excessively-long-delays-in-i2c-driver.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0012-OMAP3-Overo-allow-expansion-boards-with-any-vendor-I.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0013-OMAP3-Overo-change-address-of-expansion-eeprom-to-0x.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0014-OMAP3-board.c-don-t-attempt-to-set-up-second-RAM-ban.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0015-OMAP3-mem.c-enhance-the-RAM-test.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0016-env_nand.c-fail-gracefully-if-no-nand-is-present.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0017-OMAP3-add-definitions-to-support-sysinfo-cpu-and-cpu.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0018-OMAP3-sys_info-update-cpu-detection-for-36XX-37XX.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0019-OMAP3-clocks-update-clock-setup-for-36XX-37XX.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0020-OMAP3-beagle-add-support-for-Beagle-xM.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0021-OMAP3-Beagle-Overo-remove-omapfb.debug-y-from-defaul.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0022-OMAP3-beagle-implement-expansionboard-detection-base.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0023-beagleboard-display-message-about-I2C-errors-being-e.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0024-beagleboard-fix-TCT-expansionboard-IDs.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0025-Add-DSS-driver-for-OMAP3.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0026-Enable-DSS-driver-for-Beagle.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0027-beagleboardXM-don-t-set-mpurate-on-xM-in-bootargs.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0028-OMAP3-fix-and-clean-up-L2-cache-enable-disable-funct.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0029-OMAP3-convert-setup_auxcr-to-pure-asm.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0030-OMAP3-apply-Cortex-A8-errata-workarounds-only-on-aff.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0031-OMAP3-beagle-add-more-expansionboards-based-on-http-.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0032-OMAP3-beagle-set-mpurate-to-600-for-revB-and-revC1-3.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0033-OMAP3-beagle-prettify-expansionboard-message-a-bit.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0034-OMAP3-beagle-add-pinmux-for-Tincantools-Trainer-expa.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0035-OMAP3-Beagle-set-mpurate-to-1000-for-xM.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0036-OMAP3-Beagle-decrease-bootdelay-to-3-use-VGA-for-def.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0037-OMAP3-beagle-pass-expansionboard-name-in-bootargs.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0038-Added-configurations-for-xM-Rev-A-board.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0038-BeagleBoard-Added-LED-driver.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0039-Add-led-command.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0039-OMAP3-beagle-setenv-beaglerev-for-AxBx-Cx-xMA-for-be.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0041-BeagleBoard-Enabled-LEDs.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0042-BeagleBoard-New-command-for-status-of-USER-button.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0043-BeagleBoard-Add-CONFIG_SYS_MEMTEST_SCRATCH.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0044-Beagleboard-Adjust-boot.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0045-BeagleBoard-Enable-pullups-on-i2c2.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/0046-BeagleBoard-Add-camera-to-default-bootargs.patch
 create mode 100644 recipes-bsp/u-boot/u-boot/fw_env.config
 create mode 100644 recipes-bsp/u-boot/u-boot_git.bb
 create mode 100644 recipes-bsp/x-load/signgp.bb
 create mode 100644 recipes-bsp/x-load/signgp/signGP.c
 create mode 100644 recipes-bsp/x-load/x-load-git/bb8547fcbc54ecc7a75f9ad45a31042a04d8a2ce.patch
 create mode 100644 recipes-bsp/x-load/x-load-git/name.patch
 create mode 100644 recipes-bsp/x-load/x-load-git/xm-mem.patch
 create mode 100644 recipes-bsp/x-load/x-load.inc
 create mode 100644 recipes-bsp/x-load/x-load_git.bb

diff --git a/conf/layer.conf b/conf/layer.conf
new file mode 100644
index 0000000..a507cbc
--- /dev/null
+++ b/conf/layer.conf
@@ -0,0 +1,10 @@
+# We have a conf and classes directory, prepend to BBPATH
+BBPATH := "${LAYERDIR}:${BBPATH}"
+
+# We have a recipes directory, add to BBFILES
+BBFILES := "${BBFILES} ${LAYERDIR}/recipes*/*/*.bb \
+	${LAYERDIR}/recipes*/*/*.bbappend"
+
+BBFILE_COLLECTIONS += "beagle-bsp"
+BBFILE_PATTERN_beagle-bsp := "^${LAYERDIR}/"
+BBFILE_PRIORITY_beagle-bsp = "10"
diff --git a/conf/machine/beagleboard.conf b/conf/machine/beagleboard.conf
new file mode 100644
index 0000000..ce48019
--- /dev/null
+++ b/conf/machine/beagleboard.conf
@@ -0,0 +1,44 @@
+#@TYPE: Machine
+#@NAME: Beagleboard machine
+#@DESCRIPTION: Machine configuration for the http://beagleboard.org/ board 
+TARGET_ARCH = "arm"
+
+PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
+XSERVER = "xserver-xorg \
+           xf86-input-evdev \
+           xf86-input-mouse \
+           xf86-video-omapfb \
+           xf86-input-keyboard"
+
+# Only has DVI connector for external screen
+GUI_MACHINE_CLASS = "bigscreen"
+
+require conf/machine/include/omap3.inc
+
+PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
+
+IMAGE_FSTYPES += "tar.bz2 ubi"
+EXTRA_IMAGECMD_jffs2 = "-lnp "
+
+# Guesswork
+SERIAL_CONSOLE = "115200 ttyS2"
+
+UBOOT_MACHINE = "omap3_beagle_config"
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# From dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: logical eraseblock size:    129024 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 1996 LEBs
+MKUBIFS_ARGS = "-m 2048 -e 129024 -c 1996"
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# from dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: physical eraseblock size:   131072 bytes (128 KiB)
+# UBI: sub-page size:              512
+UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512"
+
+# and sdio
+MACHINE_FEATURES = "kernel26 screen apm usbgadget usbhost vfat alsa"
diff --git a/recipes-bsp/linux/files/configs/.empty b/recipes-bsp/linux/files/configs/.empty
new file mode 100644
index 0000000..e69de29
diff --git a/recipes-bsp/linux/linux-omap-2.6.37rc/0001-ARM-OMAP-Power-on-EHCI-serial-camera-and-DVI-on-beag.patch b/recipes-bsp/linux/linux-omap-2.6.37rc/0001-ARM-OMAP-Power-on-EHCI-serial-camera-and-DVI-on-beag.patch
new file mode 100644
index 0000000..ff2a1ce
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-2.6.37rc/0001-ARM-OMAP-Power-on-EHCI-serial-camera-and-DVI-on-beag.patch
@@ -0,0 +1,55 @@
+From 71b7d633e566195b065e09e97164bec046ca7b6d Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@dominion.thruhere.net>
+Date: Thu, 7 Oct 2010 09:25:45 +0200
+Subject: [PATCH 01/29] ARM: OMAP: Power on EHCI, serial, camera and DVI on beagleboard-xM
+
+Signed-off-by: Koen Kooi <koen@beagleboard.org>
+---
+ arch/arm/mach-omap2/board-omap3beagle.c |   26 ++++++++++++++++++++++++--
+ 1 files changed, 24 insertions(+), 2 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index 6c12760..6e8a1b9 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -297,13 +297,35 @@ static int beagle_twl_gpio_setup(struct device *dev,
+ 	gpio_request(gpio + 1, "EHCI_nOC");
+ 	gpio_direction_input(gpio + 1);
+ 
+-	/* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
++	/* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active
++	 * high / others active low) */
+ 	gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
+-	gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
++	if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM)
++		gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1);
++	else
++		gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
++
++	/* DVI reset GPIO is different between revisions */
++	if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM)
++		beagle_dvi_device.reset_gpio = 129;
++	else
++		beagle_dvi_device.reset_gpio = 170;
++
++	 /* Power on DVI, Serial and PWR led */
++	if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
++		gpio_request(gpio + 1, "nDVI_PWR_EN");
++		gpio_direction_output(gpio + 1, 0);
++	}
+ 
+ 	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
+ 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+ 
++	/* Power on camera interface on P7/P8 or DVI on A2 and beyond */
++	if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
++		gpio_request(gpio + 2, "CAM_EN");
++		gpio_direction_output(gpio + 2, 1);
++	}
++
+ 	return 0;
+ }
+ 
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-2.6.37rc/0002-omap-Beagle-detect-new-xM-revision-B.patch b/recipes-bsp/linux/linux-omap-2.6.37rc/0002-omap-Beagle-detect-new-xM-revision-B.patch
new file mode 100644
index 0000000..93a792a
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-2.6.37rc/0002-omap-Beagle-detect-new-xM-revision-B.patch
@@ -0,0 +1,43 @@
+From 60e119550f5a782c512c19d86a08313ae2ffa876 Mon Sep 17 00:00:00 2001
+From: Robert Nelson <robertcnelson@gmail.com>
+Date: Tue, 9 Nov 2010 08:34:55 -0600
+Subject: [PATCH 02/29] omap: Beagle: detect new xM revision B
+
+The xM B uses a DM3730 ES1.1 over the ES1.0 on xM A's, no other board changes.
+
+Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
+Signed-off-by: Koen Kooi <koen@beagleboard.org>
+---
+ arch/arm/mach-omap2/board-omap3beagle.c |    9 +++++++--
+ 1 files changed, 7 insertions(+), 2 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index 6e8a1b9..be8c4ec 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -58,7 +58,8 @@
+  *	AXBX	= GPIO173, GPIO172, GPIO171: 1 1 1
+  *	C1_3	= GPIO173, GPIO172, GPIO171: 1 1 0
+  *	C4	= GPIO173, GPIO172, GPIO171: 1 0 1
+- *	XM	= GPIO173, GPIO172, GPIO171: 0 0 0
++ *	XMA	= GPIO173, GPIO172, GPIO171: 0 0 0
++ *	XMB	= GPIO173, GPIO172, GPIO171: 0 0 1
+  */
+ enum {
+ 	OMAP3BEAGLE_BOARD_UNKN = 0,
+@@ -117,7 +118,11 @@ static void __init omap3_beagle_init_rev(void)
+ 		omap3_beagle_version = OMAP3BEAGLE_BOARD_C4;
+ 		break;
+ 	case 0:
+-		printk(KERN_INFO "OMAP3 Beagle Rev: xM\n");
++		printk(KERN_INFO "OMAP3 Beagle Rev: xM A\n");
++		omap3_beagle_version = OMAP3BEAGLE_BOARD_XM;
++		break;
++	case 1:
++		printk(KERN_INFO "OMAP3 Beagle Rev: xM B\n");
+ 		omap3_beagle_version = OMAP3BEAGLE_BOARD_XM;
+ 		break;
+ 	default:
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-2.6.37rc/0003-ARM-OMAP-beagleboard-Add-infrastructure-to-do-fixups.patch b/recipes-bsp/linux/linux-omap-2.6.37rc/0003-ARM-OMAP-beagleboard-Add-infrastructure-to-do-fixups.patch
new file mode 100644
index 0000000..e56e8dc
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-2.6.37rc/0003-ARM-OMAP-beagleboard-Add-infrastructure-to-do-fixups.patch
@@ -0,0 +1,219 @@
+From 72657e1ec88da91b772c7158c4c987b29d274ece Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@dominion.thruhere.net>
+Date: Wed, 6 Oct 2010 10:19:34 +0200
+Subject: [PATCH 03/29] ARM: OMAP: beagleboard: Add infrastructure to do fixups based on expansionboard name passed by u-boot
+
+Add support for Tincantools Zippy and Zippy2 expansionboards as well
+
+Signed-off-by: Koen Kooi <koen@beagleboard.org>
+---
+ arch/arm/mach-omap2/board-omap3beagle.c |  142 ++++++++++++++++++++++++++++++-
+ 1 files changed, 139 insertions(+), 3 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index be8c4ec..495be15 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -21,6 +21,7 @@
+ #include <linux/io.h>
+ #include <linux/leds.h>
+ #include <linux/gpio.h>
++#include <linux/irq.h>
+ #include <linux/input.h>
+ #include <linux/gpio_keys.h>
+ 
+@@ -143,6 +144,92 @@ fail0:
+ 	return;
+ }
+ 
++char expansionboard_name[16];
++
++#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
++
++#include <plat/mcspi.h>
++#include <linux/spi/spi.h>
++
++#define OMAP3BEAGLE_GPIO_ENC28J60_IRQ 157
++
++static struct omap2_mcspi_device_config enc28j60_spi_chip_info = {
++	.turbo_mode	= 0,
++	.single_channel	= 1,	/* 0: slave, 1: master */
++};
++
++static struct spi_board_info omap3beagle_zippy_spi_board_info[] __initdata = {
++	{
++		.modalias		= "enc28j60",
++		.bus_num		= 4,
++		.chip_select		= 0,
++		.max_speed_hz		= 20000000,
++		.controller_data	= &enc28j60_spi_chip_info,
++	},
++};
++
++static void __init omap3beagle_enc28j60_init(void)
++{
++	if ((gpio_request(OMAP3BEAGLE_GPIO_ENC28J60_IRQ, "ENC28J60_IRQ") == 0) &&
++	    (gpio_direction_input(OMAP3BEAGLE_GPIO_ENC28J60_IRQ) == 0)) {
++		gpio_export(OMAP3BEAGLE_GPIO_ENC28J60_IRQ, 0);
++		omap3beagle_zippy_spi_board_info[0].irq	= OMAP_GPIO_IRQ(OMAP3BEAGLE_GPIO_ENC28J60_IRQ);
++		set_irq_type(omap3beagle_zippy_spi_board_info[0].irq, IRQ_TYPE_EDGE_FALLING);
++	} else {
++		printk(KERN_ERR "could not obtain gpio for ENC28J60_IRQ\n");
++		return;
++	}
++
++	spi_register_board_info(omap3beagle_zippy_spi_board_info,
++			ARRAY_SIZE(omap3beagle_zippy_spi_board_info));
++}
++
++#else
++static inline void __init omap3beagle_enc28j60_init(void) { return; }
++#endif
++
++#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
++
++#include <plat/mcspi.h>
++#include <linux/spi/spi.h>
++
++#define OMAP3BEAGLE_GPIO_KS8851_IRQ 157
++
++static struct omap2_mcspi_device_config ks8851_spi_chip_info = {
++	.turbo_mode	= 0,
++	.single_channel	= 1,	/* 0: slave, 1: master */
++};
++
++static struct spi_board_info omap3beagle_zippy2_spi_board_info[] __initdata = {
++	{
++		.modalias		= "ks8851",
++		.bus_num		= 4,
++		.chip_select		= 0,
++		.max_speed_hz		= 36000000,
++		.controller_data	= &ks8851_spi_chip_info,
++	},
++};
++
++static void __init omap3beagle_ks8851_init(void)
++{
++	if ((gpio_request(OMAP3BEAGLE_GPIO_KS8851_IRQ, "KS8851_IRQ") == 0) &&
++	    (gpio_direction_input(OMAP3BEAGLE_GPIO_KS8851_IRQ) == 0)) {
++		gpio_export(OMAP3BEAGLE_GPIO_KS8851_IRQ, 0);
++		omap3beagle_zippy2_spi_board_info[0].irq	= OMAP_GPIO_IRQ(OMAP3BEAGLE_GPIO_KS8851_IRQ);
++		set_irq_type(omap3beagle_zippy2_spi_board_info[0].irq, IRQ_TYPE_EDGE_FALLING);
++	} else {
++		printk(KERN_ERR "could not obtain gpio for KS8851_IRQ\n");
++		return;
++	}
++	
++	spi_register_board_info(omap3beagle_zippy2_spi_board_info,
++							ARRAY_SIZE(omap3beagle_zippy2_spi_board_info));
++}
++
++#else
++static inline void __init omap3beagle_ks8851_init(void) { return; }
++#endif
++
+ static struct mtd_partition omap3beagle_nand_partitions[] = {
+ 	/* All the partition sizes are listed in terms of NAND block size */
+ 	{
+@@ -262,6 +349,12 @@ static struct omap2_hsmmc_info mmc[] = {
+ 		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
+ 		.gpio_wp	= 29,
+ 	},
++	{
++		.mmc		= 2,
++		.caps       = MMC_CAP_4_BIT_DATA,
++		.transceiver	= true,
++		.ocr_mask	= 0x00100000,	/* 3.3V */
++	},
+ 	{}	/* Terminator */
+ };
+ 
+@@ -431,7 +524,7 @@ static struct twl4030_platform_data beagle_twldata = {
+ 	.vpll2		= &beagle_vpll2,
+ };
+ 
+-static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = {
++static struct i2c_board_info __initdata beagle_i2c1_boardinfo[] = {
+ 	{
+ 		I2C_BOARD_INFO("twl4030", 0x48),
+ 		.flags = I2C_CLIENT_WAKE,
+@@ -446,10 +539,24 @@ static struct i2c_board_info __initdata beagle_i2c_eeprom[] = {
+        },
+ };
+ 
++#if defined(CONFIG_RTC_DRV_DS1307) || \
++	defined(CONFIG_RTC_DRV_DS1307_MODULE)
++
++static struct i2c_board_info __initdata beagle_i2c2_boardinfo[] = {
++	{
++		I2C_BOARD_INFO("ds1307", 0x68),
++	},
++};
++#else
++static struct i2c_board_info __initdata beagle_i2c2_boardinfo[] = {};
++#endif
++
+ static int __init omap3_beagle_i2c_init(void)
+ {
+-	omap_register_i2c_bus(1, 2600, beagle_i2c_boardinfo,
+-			ARRAY_SIZE(beagle_i2c_boardinfo));
++	omap_register_i2c_bus(1, 2600, beagle_i2c1_boardinfo,
++			ARRAY_SIZE(beagle_i2c1_boardinfo));
++	omap_register_i2c_bus(2, 400,  beagle_i2c2_boardinfo,
++			ARRAY_SIZE(beagle_i2c2_boardinfo));
+ 	/* Bus 3 is attached to the DVI port where devices like the pico DLP
+ 	 * projector don't work reliably with 400kHz */
+ 	omap_register_i2c_bus(3, 100, beagle_i2c_eeprom, ARRAY_SIZE(beagle_i2c_eeprom));
+@@ -583,6 +690,15 @@ static struct omap_musb_board_data musb_board_data = {
+ 	.power			= 100,
+ };
+ 
++static int __init expansionboard_setup(char *str)
++{
++	if (!str)
++		return -EINVAL;
++	strncpy(expansionboard_name, str, 16);
++	printk(KERN_INFO "Beagle expansionboard: %s\n", expansionboard_name);
++	return 0;
++}
++
+ static void __init omap3_beagle_init(void)
+ {
+ 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+@@ -597,6 +713,24 @@ static void __init omap3_beagle_init(void)
+ 	/* REVISIT leave DVI powered down until it's needed ... */
+ 	gpio_direction_output(170, true);
+ 
++	if(!strcmp(expansionboard_name, "zippy")) 
++	{
++		printk(KERN_INFO "Beagle expansionboard: initializing enc28j60\n");
++		omap3beagle_enc28j60_init();
++		printk(KERN_INFO "Beagle expansionboard: assigning GPIO 141 and 162 to MMC1\n");
++		mmc[1].gpio_wp = 141;
++		mmc[1].gpio_cd = 162;
++	}
++	
++	if(!strcmp(expansionboard_name, "zippy2")) 
++	{
++		printk(KERN_INFO "Beagle expansionboard: initializing ks_8851\n");
++		omap3beagle_ks8851_init();
++		printk(KERN_INFO "Beagle expansionboard: assigning GPIO 141 and 162 to MMC1\n");
++		mmc[1].gpio_wp = 141;
++		mmc[1].gpio_cd = 162;
++	}
++
+ 	usb_musb_init(&musb_board_data);
+ 	usb_ehci_init(&ehci_pdata);
+ 	omap3beagle_flash_init();
+@@ -608,6 +742,8 @@ static void __init omap3_beagle_init(void)
+ 	beagle_display_init();
+ }
+ 
++early_param("buddy", expansionboard_setup);
++
+ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
+ 	/* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
+ 	.boot_params	= 0x80000100,
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-2.6.37rc/0004-ARM-OMAP-beagleboard-pre-export-GPIOs-to-userspace-w.patch b/recipes-bsp/linux/linux-omap-2.6.37rc/0004-ARM-OMAP-beagleboard-pre-export-GPIOs-to-userspace-w.patch
new file mode 100644
index 0000000..c4b6f4c
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-2.6.37rc/0004-ARM-OMAP-beagleboard-pre-export-GPIOs-to-userspace-w.patch
@@ -0,0 +1,57 @@
+From 6f80e6f5205a429951244e690952f192b78d15a8 Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@dominion.thruhere.net>
+Date: Sun, 5 Dec 2010 13:25:00 +0100
+Subject: [PATCH 04/29] ARM: OMAP: beagleboard: pre-export GPIOs to userspace when using a Tincantools trainerboard
+
+This really needs a for loop, patches welcome
+
+Signed-off-by: Koen Kooi <koen@beagleboard.org>
+---
+ arch/arm/mach-omap2/board-omap3beagle.c |   31 +++++++++++++++++++++++++++++++
+ 1 files changed, 31 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index 495be15..34f2132 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -731,6 +731,37 @@ static void __init omap3_beagle_init(void)
+ 		mmc[1].gpio_cd = 162;
+ 	}
+ 
++	if(!strcmp(expansionboard_name, "trainer"))
++	{
++		printk(KERN_INFO "Beagle expansionboard: exporting GPIOs 130-141,162 to userspace\n");
++		gpio_request(130, "sysfs");
++		gpio_export(130, 1);
++		gpio_request(131, "sysfs");
++		gpio_export(131, 1);
++		gpio_request(132, "sysfs");
++		gpio_export(132, 1);
++		gpio_request(133, "sysfs");
++		gpio_export(133, 1);
++		gpio_request(134, "sysfs");
++		gpio_export(134, 1);
++		gpio_request(135, "sysfs");
++		gpio_export(135, 1);
++		gpio_request(136, "sysfs");
++		gpio_export(136, 1);
++		gpio_request(137, "sysfs");
++		gpio_export(137, 1);
++		gpio_request(138, "sysfs");
++		gpio_export(138, 1);
++		gpio_request(139, "sysfs");
++		gpio_export(139, 1);
++		gpio_request(140, "sysfs");
++		gpio_export(140, 1);
++		gpio_request(141, "sysfs");
++		gpio_export(141, 1);
++		gpio_request(162, "sysfs");
++		gpio_export(162, 1);
++	}
++
+ 	usb_musb_init(&musb_board_data);
+ 	usb_ehci_init(&ehci_pdata);
+ 	omap3beagle_flash_init();
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-2.6.37rc/0005-modedb.c-add-proper-720p60-mode.patch b/recipes-bsp/linux/linux-omap-2.6.37rc/0005-modedb.c-add-proper-720p60-mode.patch
new file mode 100644
index 0000000..dae9671
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-2.6.37rc/0005-modedb.c-add-proper-720p60-mode.patch
@@ -0,0 +1,28 @@
+From ea2b3d705162f8a1622e60da27b2b5b31ad3abe7 Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@dominion.thruhere.net>
+Date: Mon, 8 Mar 2010 14:38:31 +0100
+Subject: [PATCH 05/29] modedb.c: add proper 720p60 mode
+
+Signed-off-by: Koen Kooi <koen@beagleboard.org>
+---
+ drivers/video/modedb.c |    4 ++++
+ 1 files changed, 4 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/video/modedb.c b/drivers/video/modedb.c
+index de450c1..1cd8153 100644
+--- a/drivers/video/modedb.c
++++ b/drivers/video/modedb.c
+@@ -46,6 +46,10 @@ static const struct fb_videomode modedb[] = {
+ 	NULL, 60, 640, 480, 39721, 40, 24, 32, 11, 96, 2,
+ 	0, FB_VMODE_NONINTERLACED
+     }, {
++	/* 1280x720 @ 60 Hz, 45 kHz hsync, CEA 681-E Format 4 */
++	"hd720", 60, 1280, 720, 13468, 220, 110, 20, 5, 40, 5,
++	0, FB_VMODE_NONINTERLACED
++    }, {
+ 	/* 800x600 @ 56 Hz, 35.15 kHz hsync */
+ 	NULL, 56, 800, 600, 27777, 128, 24, 22, 1, 72, 2,
+ 	0, FB_VMODE_NONINTERLACED
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-2.6.37rc/0006-mmc-don-t-display-single-block-read-console-messages.patch b/recipes-bsp/linux/linux-omap-2.6.37rc/0006-mmc-don-t-display-single-block-read-console-messages.patch
new file mode 100644
index 0000000..0a2f0a1
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-2.6.37rc/0006-mmc-don-t-display-single-block-read-console-messages.patch
@@ -0,0 +1,28 @@
+From 2036f80d16c1df22b00953f4d2e2457eef00a82d Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Mon, 4 Jan 2010 19:20:25 -0800
+Subject: [PATCH 06/29] mmc: don't display single block read console messages
+
+mmc: don't display single block read console messages
+---
+ drivers/mmc/card/block.c |    4 ++--
+ 1 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
+index 217f820..b0b68cc 100644
+--- a/drivers/mmc/card/block.c
++++ b/drivers/mmc/card/block.c
+@@ -434,8 +434,8 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req)
+ 		if (brq.cmd.error || brq.data.error || brq.stop.error) {
+ 			if (brq.data.blocks > 1 && rq_data_dir(req) == READ) {
+ 				/* Redo read one sector at a time */
+-				printk(KERN_WARNING "%s: retrying using single "
+-				       "block read\n", req->rq_disk->disk_name);
++				/* printk(KERN_WARNING "%s: retrying using single "
++				       "block read\n", req->rq_disk->disk_name); */
+ 				disable_multi = 1;
+ 				continue;
+ 			}
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-2.6.37rc/0007-MTD-silence-ecc-errors-on-mtdblock0.patch b/recipes-bsp/linux/linux-omap-2.6.37rc/0007-MTD-silence-ecc-errors-on-mtdblock0.patch
new file mode 100644
index 0000000..04de4e7
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-2.6.37rc/0007-MTD-silence-ecc-errors-on-mtdblock0.patch
@@ -0,0 +1,63 @@
+From 793eb265af99817165bc03ae96adaaf6e4860dca Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Mon, 26 Apr 2010 11:17:26 -0700
+Subject: [PATCH 07/29] MTD: silence ecc errors on mtdblock0
+
+mtdblock0 is the x-load partition, which uses hw ecc
+this confuses linux, which uses sw ecc
+this patch silences ecc error messages when linux peeks into mtdblock0
+* not for upstream submission *
+---
+ block/blk-core.c            |    7 ++++---
+ drivers/mtd/nand/nand_ecc.c |    2 +-
+ fs/buffer.c                 |    3 ++-
+ 3 files changed, 7 insertions(+), 5 deletions(-)
+
+diff --git a/block/blk-core.c b/block/blk-core.c
+index 4ce953f..1ef9a01 100644
+--- a/block/blk-core.c
++++ b/block/blk-core.c
+@@ -2028,9 +2028,10 @@ bool blk_update_request(struct request *req, int error, unsigned int nr_bytes)
+ 
+ 	if (error && req->cmd_type == REQ_TYPE_FS &&
+ 	    !(req->cmd_flags & REQ_QUIET)) {
+-		printk(KERN_ERR "end_request: I/O error, dev %s, sector %llu\n",
+-				req->rq_disk ? req->rq_disk->disk_name : "?",
+-				(unsigned long long)blk_rq_pos(req));
++		if (req->rq_disk && (strcmp(req->rq_disk->disk_name, "mtdblock0") != 0))
++				printk(KERN_ERR "end_request: I/O error, dev %s, sector %llu\n",
++					req->rq_disk ? req->rq_disk->disk_name : "?",
++					(unsigned long long)blk_rq_pos(req));
+ 	}
+ 
+ 	blk_account_io_completion(req, nr_bytes);
+diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c
+index 271b8e7..5924ba7 100644
+--- a/drivers/mtd/nand/nand_ecc.c
++++ b/drivers/mtd/nand/nand_ecc.c
+@@ -507,7 +507,7 @@ int __nand_correct_data(unsigned char *buf,
+ 	if ((bitsperbyte[b0] + bitsperbyte[b1] + bitsperbyte[b2]) == 1)
+ 		return 1;	/* error in ecc data; no action needed */
+ 
+-	printk(KERN_ERR "uncorrectable error : ");
++//	printk(KERN_ERR "uncorrectable error : ");
+ 	return -1;
+ }
+ EXPORT_SYMBOL(__nand_correct_data);
+diff --git a/fs/buffer.c b/fs/buffer.c
+index 5930e38..06a00d5 100644
+--- a/fs/buffer.c
++++ b/fs/buffer.c
+@@ -114,7 +114,8 @@ static int quiet_error(struct buffer_head *bh)
+ static void buffer_io_error(struct buffer_head *bh)
+ {
+ 	char b[BDEVNAME_SIZE];
+-	printk(KERN_ERR "Buffer I/O error on device %s, logical block %Lu\n",
++	if (strcmp(bdevname(bh->b_bdev, b), "mtdblock0") != 0)
++		printk(KERN_ERR "Buffer I/O error on device %s, logical block %Lu\n",
+ 			bdevname(bh->b_bdev, b),
+ 			(unsigned long long)bh->b_blocknr);
+ }
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-2.6.37rc/0008-Miracle-patch.patch b/recipes-bsp/linux/linux-omap-2.6.37rc/0008-Miracle-patch.patch
new file mode 100644
index 0000000..b76eb27
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-2.6.37rc/0008-Miracle-patch.patch
@@ -0,0 +1,504 @@
+From 31949867bace7945acd3ec10c822e6988613aed7 Mon Sep 17 00:00:00 2001
+From: Mike Galbraith <efault@gmx.de>
+Date: Fri, 19 Nov 2010 12:52:42 +0100
+Subject: [PATCH 08/29] Miracle patch
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+On Sun, 2010-11-14 at 16:26 -0800, Linus Torvalds wrote:
+> On Sun, Nov 14, 2010 at 4:15 PM, Linus Torvalds
+> <torvalds@linux-foundation.org> wrote:
+> >
+> > THAT is why I think it's so silly to try to be so strict and walk over
+> > all processes while holding a couple of spinlocks.
+>
+> Btw, let me say that I think the patch is great even with that thing
+> in. It looks clean, the thing I'm complaining about is not a big deal,
+> and it seems to perform very much as advertized. The difference with
+> autogroup scheduling is very noticeable with a simple "make -j64"
+> kernel compile.
+>
+> So I really don't think it's a big deal. The sysctl handler isn't even
+> complicated. But boy does it hurt my eyes to see a spinlock held
+> around a "do_each_thread()". And I do get the feeling that the
+> simplest way to fix it would be to just remove the code entirely, and
+> just say that "enabling/disabling may be delayed for old processes
+> with existing autogroups".
+
+Which is what I just did. If the oddball case isn't a big deal, the
+patch shrinks, which is a good thing. I just wanted to cover all bases.
+
+Patchlet with handler whacked:
+
+A recurring complaint from CFS users is that parallel kbuild has a negative
+impact on desktop interactivity.  This patch implements an idea from Linus,
+to automatically create task groups.  This patch only implements Linus' per
+tty task group suggestion, and only for fair class tasks, but leaves the way
+open for enhancement.
+
+Implementation: each task's signal struct contains an inherited pointer to a
+refcounted autogroup struct containing a task group pointer, the default for
+all tasks pointing to the init_task_group.  When a task calls __proc_set_tty(),
+the process wide reference to the default group is dropped, a new task group is
+created, and the process is moved into the new task group.  Children thereafter
+inherit this task group, and increase it's refcount.  On exit, a reference to the
+current task group is dropped when the last reference to each signal struct is
+dropped.  The task group is destroyed when the last signal struct referencing
+it is freed.   At runqueue selection time, IFF a task has no cgroup assignment,
+it's current autogroup is used.
+
+The feature is enabled from boot by default if CONFIG_SCHED_AUTOGROUP is
+selected, but can be disabled via the boot option noautogroup, and can be
+also be turned on/off on the fly via..
+   echo [01] > /proc/sys/kernel/sched_autogroup_enabled.
+..which will automatically move tasks to/from the root task group.
+
+Some numbers.
+
+A 100% hog overhead measurement proggy pinned to the same CPU as a make -j10
+
+About measurement proggy:
+  pert/sec = perturbations/sec
+  min/max/avg = scheduler service latencies in usecs
+  sum/s = time accrued by the competition per sample period (1 sec here)
+  overhead = %CPU received by the competition per sample period
+
+pert/s:       31 >40475.37us:        3 min:  0.37 max:48103.60 avg:29573.74 sum/s:916786us overhead:90.24%
+pert/s:       23 >41237.70us:       12 min:  0.36 max:56010.39 avg:40187.01 sum/s:924301us overhead:91.99%
+pert/s:       24 >42150.22us:       12 min:  8.86 max:61265.91 avg:39459.91 sum/s:947038us overhead:92.20%
+pert/s:       26 >42344.91us:       11 min:  3.83 max:52029.60 avg:36164.70 sum/s:940282us overhead:91.12%
+pert/s:       24 >44262.90us:       14 min:  5.05 max:82735.15 avg:40314.33 sum/s:967544us overhead:92.22%
+
+Same load with this patch applied.
+
+pert/s:      229 >5484.43us:       41 min:  0.15 max:12069.42 avg:2193.81 sum/s:502382us overhead:50.24%
+pert/s:      222 >5652.28us:       43 min:  0.46 max:12077.31 avg:2248.56 sum/s:499181us overhead:49.92%
+pert/s:      211 >5809.38us:       43 min:  0.16 max:12064.78 avg:2381.70 sum/s:502538us overhead:50.25%
+pert/s:      223 >6147.92us:       43 min:  0.15 max:16107.46 avg:2282.17 sum/s:508925us overhead:50.49%
+pert/s:      218 >6252.64us:       43 min:  0.16 max:12066.13 avg:2324.11 sum/s:506656us overhead:50.27%
+
+Average service latency is an order of magnitude better with autogroup.
+(Imagine that pert were Xorg or whatnot instead)
+
+Using Mathieu Desnoyers' wakeup-latency testcase:
+
+With taskset -c 3 make -j 10 running..
+
+taskset -c 3 ./wakeup-latency& sleep 30;killall wakeup-latency
+
+without:
+maximum latency: 42963.2 µs
+average latency: 9077.0 µs
+missed timer events: 0
+
+with:
+maximum latency: 4160.7 µs
+average latency: 149.4 µs
+missed timer events: 0
+
+Signed-off-by: Mike Galbraith <efault@gmx.de>
+---
+ Documentation/kernel-parameters.txt |    2 +
+ drivers/tty/tty_io.c                |    1 +
+ include/linux/sched.h               |   19 +++++
+ init/Kconfig                        |   12 +++
+ kernel/fork.c                       |    5 +-
+ kernel/sched.c                      |   25 ++++--
+ kernel/sched_autogroup.c            |  140 +++++++++++++++++++++++++++++++++++
+ kernel/sched_autogroup.h            |   18 +++++
+ kernel/sysctl.c                     |   11 +++
+ 9 files changed, 224 insertions(+), 9 deletions(-)
+ create mode 100644 kernel/sched_autogroup.c
+ create mode 100644 kernel/sched_autogroup.h
+
+diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
+index 8b61c93..9408728 100644
+--- a/Documentation/kernel-parameters.txt
++++ b/Documentation/kernel-parameters.txt
+@@ -1622,6 +1622,8 @@ and is between 256 and 4096 characters. It is defined in the file
+ 	noapic		[SMP,APIC] Tells the kernel to not make use of any
+ 			IOAPICs that may be present in the system.
+ 
++	noautogroup	Disable scheduler automatic task group creation.
++
+ 	nobats		[PPC] Do not use BATs for mapping kernel lowmem
+ 			on "Classic" PPC cores.
+ 
+diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
+index 35480dd..1849f4a 100644
+--- a/drivers/tty/tty_io.c
++++ b/drivers/tty/tty_io.c
+@@ -3169,6 +3169,7 @@ static void __proc_set_tty(struct task_struct *tsk, struct tty_struct *tty)
+ 	put_pid(tsk->signal->tty_old_pgrp);
+ 	tsk->signal->tty = tty_kref_get(tty);
+ 	tsk->signal->tty_old_pgrp = NULL;
++	sched_autogroup_create_attach(tsk);
+ }
+ 
+ static void proc_set_tty(struct task_struct *tsk, struct tty_struct *tty)
+diff --git a/include/linux/sched.h b/include/linux/sched.h
+index 2238745..3a775e3 100644
+--- a/include/linux/sched.h
++++ b/include/linux/sched.h
+@@ -509,6 +509,8 @@ struct thread_group_cputimer {
+ 	spinlock_t lock;
+ };
+ 
++struct autogroup;
++
+ /*
+  * NOTE! "signal_struct" does not have it's own
+  * locking, because a shared signal_struct always
+@@ -576,6 +578,9 @@ struct signal_struct {
+ 
+ 	struct tty_struct *tty; /* NULL if no tty */
+ 
++#ifdef CONFIG_SCHED_AUTOGROUP
++	struct autogroup *autogroup;
++#endif
+ 	/*
+ 	 * Cumulative resource counters for dead threads in the group,
+ 	 * and for reaped dead child processes forked by this group.
+@@ -1931,6 +1936,20 @@ int sched_rt_handler(struct ctl_table *table, int write,
+ 
+ extern unsigned int sysctl_sched_compat_yield;
+ 
++#ifdef CONFIG_SCHED_AUTOGROUP
++extern unsigned int sysctl_sched_autogroup_enabled;
++
++extern void sched_autogroup_create_attach(struct task_struct *p);
++extern void sched_autogroup_detach(struct task_struct *p);
++extern void sched_autogroup_fork(struct signal_struct *sig);
++extern void sched_autogroup_exit(struct signal_struct *sig);
++#else
++static inline void sched_autogroup_create_attach(struct task_struct *p) { }
++static inline void sched_autogroup_detach(struct task_struct *p) { }
++static inline void sched_autogroup_fork(struct signal_struct *sig) { }
++static inline void sched_autogroup_exit(struct signal_struct *sig) { }
++#endif
++
+ #ifdef CONFIG_RT_MUTEXES
+ extern int rt_mutex_getprio(struct task_struct *p);
+ extern void rt_mutex_setprio(struct task_struct *p, int prio);
+diff --git a/init/Kconfig b/init/Kconfig
+index c972899..a4985d9 100644
+--- a/init/Kconfig
++++ b/init/Kconfig
+@@ -741,6 +741,18 @@ config NET_NS
+ 
+ endif # NAMESPACES
+ 
++config SCHED_AUTOGROUP
++	bool "Automatic process group scheduling"
++	select CGROUPS
++	select CGROUP_SCHED
++	select FAIR_GROUP_SCHED
++	help
++	  This option optimizes the scheduler for common desktop workloads by
++	  automatically creating and populating task groups.  This separation
++	  of workloads isolates aggressive CPU burners (like build jobs) from
++	  desktop applications.  Task group autogeneration is currently based
++	  upon task tty association.
++
+ config MM_OWNER
+ 	bool
+ 
+diff --git a/kernel/fork.c b/kernel/fork.c
+index 5447dc7..70ea75f 100644
+--- a/kernel/fork.c
++++ b/kernel/fork.c
+@@ -174,8 +174,10 @@ static inline void free_signal_struct(struct signal_struct *sig)
+ 
+ static inline void put_signal_struct(struct signal_struct *sig)
+ {
+-	if (atomic_dec_and_test(&sig->sigcnt))
++	if (atomic_dec_and_test(&sig->sigcnt)) {
++		sched_autogroup_exit(sig);
+ 		free_signal_struct(sig);
++	}
+ }
+ 
+ void __put_task_struct(struct task_struct *tsk)
+@@ -905,6 +907,7 @@ static int copy_signal(unsigned long clone_flags, struct task_struct *tsk)
+ 	posix_cpu_timers_init_group(sig);
+ 
+ 	tty_audit_fork(sig);
++	sched_autogroup_fork(sig);
+ 
+ 	sig->oom_adj = current->signal->oom_adj;
+ 	sig->oom_score_adj = current->signal->oom_score_adj;
+diff --git a/kernel/sched.c b/kernel/sched.c
+index 297d1a0..53ff9a1 100644
+--- a/kernel/sched.c
++++ b/kernel/sched.c
+@@ -78,6 +78,7 @@
+ 
+ #include "sched_cpupri.h"
+ #include "workqueue_sched.h"
++#include "sched_autogroup.h"
+ 
+ #define CREATE_TRACE_POINTS
+ #include <trace/events/sched.h>
+@@ -605,11 +606,14 @@ static inline int cpu_of(struct rq *rq)
+  */
+ static inline struct task_group *task_group(struct task_struct *p)
+ {
++	struct task_group *tg;
+ 	struct cgroup_subsys_state *css;
+ 
+ 	css = task_subsys_state_check(p, cpu_cgroup_subsys_id,
+ 			lockdep_is_held(&task_rq(p)->lock));
+-	return container_of(css, struct task_group, css);
++	tg = container_of(css, struct task_group, css);
++
++	return autogroup_task_group(p, tg);
+ }
+ 
+ /* Change a task's cfs_rq and parent entity if it moves across CPUs/groups */
+@@ -2063,6 +2067,7 @@ static void update_rq_clock_task(struct rq *rq, s64 delta)
+ #include "sched_idletask.c"
+ #include "sched_fair.c"
+ #include "sched_rt.c"
++#include "sched_autogroup.c"
+ #include "sched_stoptask.c"
+ #ifdef CONFIG_SCHED_DEBUG
+ # include "sched_debug.c"
+@@ -8164,7 +8169,7 @@ void __init sched_init(void)
+ #ifdef CONFIG_CGROUP_SCHED
+ 	list_add(&init_task_group.list, &task_groups);
+ 	INIT_LIST_HEAD(&init_task_group.children);
+-
++	autogroup_init(&init_task);
+ #endif /* CONFIG_CGROUP_SCHED */
+ 
+ #if defined CONFIG_FAIR_GROUP_SCHED && defined CONFIG_SMP
+@@ -8694,15 +8699,11 @@ void sched_destroy_group(struct task_group *tg)
+ /* change task's runqueue when it moves between groups.
+  *	The caller of this function should have put the task in its new group
+  *	by now. This function just updates tsk->se.cfs_rq and tsk->se.parent to
+- *	reflect its new group.
++ *	reflect its new group.  Called with the runqueue lock held.
+  */
+-void sched_move_task(struct task_struct *tsk)
++void __sched_move_task(struct task_struct *tsk, struct rq *rq)
+ {
+ 	int on_rq, running;
+-	unsigned long flags;
+-	struct rq *rq;
+-
+-	rq = task_rq_lock(tsk, &flags);
+ 
+ 	running = task_current(rq, tsk);
+ 	on_rq = tsk->se.on_rq;
+@@ -8723,7 +8724,15 @@ void sched_move_task(struct task_struct *tsk)
+ 		tsk->sched_class->set_curr_task(rq);
+ 	if (on_rq)
+ 		enqueue_task(rq, tsk, 0);
++}
+ 
++void sched_move_task(struct task_struct *tsk)
++{
++	struct rq *rq;
++	unsigned long flags;
++
++	rq = task_rq_lock(tsk, &flags);
++	__sched_move_task(tsk, rq);
+ 	task_rq_unlock(rq, &flags);
+ }
+ #endif /* CONFIG_CGROUP_SCHED */
+diff --git a/kernel/sched_autogroup.c b/kernel/sched_autogroup.c
+new file mode 100644
+index 0000000..62f1d0e
+--- /dev/null
++++ b/kernel/sched_autogroup.c
+@@ -0,0 +1,140 @@
++#ifdef CONFIG_SCHED_AUTOGROUP
++
++unsigned int __read_mostly sysctl_sched_autogroup_enabled = 1;
++
++struct autogroup {
++	struct kref		kref;
++	struct task_group	*tg;
++};
++
++static struct autogroup autogroup_default;
++
++static void autogroup_init(struct task_struct *init_task)
++{
++	autogroup_default.tg = &init_task_group;
++	kref_init(&autogroup_default.kref);
++	init_task->signal->autogroup = &autogroup_default;
++}
++
++static inline void autogroup_destroy(struct kref *kref)
++{
++	struct autogroup *ag = container_of(kref, struct autogroup, kref);
++	struct task_group *tg = ag->tg;
++
++	kfree(ag);
++	sched_destroy_group(tg);
++}
++
++static inline void autogroup_kref_put(struct autogroup *ag)
++{
++	kref_put(&ag->kref, autogroup_destroy);
++}
++
++static inline struct autogroup *autogroup_kref_get(struct autogroup *ag)
++{
++	kref_get(&ag->kref);
++	return ag;
++}
++
++static inline struct autogroup *autogroup_create(void)
++{
++	struct autogroup *ag = kmalloc(sizeof(*ag), GFP_KERNEL);
++
++	if (!ag)
++		goto out_fail;
++
++	ag->tg = sched_create_group(&init_task_group);
++	kref_init(&ag->kref);
++
++	if (!(IS_ERR(ag->tg)))
++		return ag;
++
++out_fail:
++	if (ag) {
++		kfree(ag);
++		WARN_ON(1);
++	} else
++		WARN_ON(1);
++
++	return autogroup_kref_get(&autogroup_default);
++}
++
++static inline struct task_group *
++autogroup_task_group(struct task_struct *p, struct task_group *tg)
++{
++	int enabled = ACCESS_ONCE(sysctl_sched_autogroup_enabled);
++
++	enabled &= (tg == &root_task_group);
++	enabled &= (p->sched_class == &fair_sched_class);
++	enabled &= (!(p->flags & PF_EXITING));
++
++	if (enabled)
++		return p->signal->autogroup->tg;
++
++	return tg;
++}
++
++static void
++autogroup_move_group(struct task_struct *p, struct autogroup *ag)
++{
++	struct autogroup *prev;
++	struct task_struct *t;
++	struct rq *rq;
++	unsigned long flags;
++
++	rq = task_rq_lock(p, &flags);
++	prev = p->signal->autogroup;
++	if (prev == ag) {
++		task_rq_unlock(rq, &flags);
++		return;
++	}
++
++	p->signal->autogroup = autogroup_kref_get(ag);
++	__sched_move_task(p, rq);
++	task_rq_unlock(rq, &flags);
++
++	rcu_read_lock();
++	list_for_each_entry_rcu(t, &p->thread_group, thread_group) {
++		sched_move_task(t);
++	}
++	rcu_read_unlock();
++
++	autogroup_kref_put(prev);
++}
++
++void sched_autogroup_create_attach(struct task_struct *p)
++{
++	struct autogroup *ag = autogroup_create();
++
++	autogroup_move_group(p, ag);
++	/* drop extra refrence added by autogroup_create() */
++	autogroup_kref_put(ag);
++}
++EXPORT_SYMBOL(sched_autogroup_create_attach);
++
++/* currently has no users */
++void sched_autogroup_detach(struct task_struct *p)
++{
++	autogroup_move_group(p, &autogroup_default);
++}
++EXPORT_SYMBOL(sched_autogroup_detach);
++
++void sched_autogroup_fork(struct signal_struct *sig)
++{
++	sig->autogroup = autogroup_kref_get(current->signal->autogroup);
++}
++
++void sched_autogroup_exit(struct signal_struct *sig)
++{
++	autogroup_kref_put(sig->autogroup);
++}
++
++static int __init setup_autogroup(char *str)
++{
++	sysctl_sched_autogroup_enabled = 0;
++
++	return 1;
++}
++
++__setup("noautogroup", setup_autogroup);
++#endif
+diff --git a/kernel/sched_autogroup.h b/kernel/sched_autogroup.h
+new file mode 100644
+index 0000000..6048f5d
+--- /dev/null
++++ b/kernel/sched_autogroup.h
+@@ -0,0 +1,18 @@
++#ifdef CONFIG_SCHED_AUTOGROUP
++
++static void __sched_move_task(struct task_struct *tsk, struct rq *rq);
++
++static inline struct task_group *
++autogroup_task_group(struct task_struct *p, struct task_group *tg);
++
++#else /* !CONFIG_SCHED_AUTOGROUP */
++
++static inline void autogroup_init(struct task_struct *init_task) {  }
++
++static inline struct task_group *
++autogroup_task_group(struct task_struct *p, struct task_group *tg)
++{
++	return tg;
++}
++
++#endif /* CONFIG_SCHED_AUTOGROUP */
+diff --git a/kernel/sysctl.c b/kernel/sysctl.c
+index 5abfa15..b162f65 100644
+--- a/kernel/sysctl.c
++++ b/kernel/sysctl.c
+@@ -382,6 +382,17 @@ static struct ctl_table kern_table[] = {
+ 		.mode		= 0644,
+ 		.proc_handler	= proc_dointvec,
+ 	},
++#ifdef CONFIG_SCHED_AUTOGROUP
++	{
++		.procname	= "sched_autogroup_enabled",
++		.data		= &sysctl_sched_autogroup_enabled,
++		.maxlen		= sizeof(unsigned int),
++		.mode		= 0644,
++		.proc_handler	= proc_dointvec,
++		.extra1		= &zero,
++		.extra2		= &one,
++	},
++#endif
+ #ifdef CONFIG_PROVE_LOCKING
+ 	{
+ 		.procname	= "prove_locking",
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-2.6.37rc/0009-ARM-OMAP-add-omap_rev_-macros.patch b/recipes-bsp/linux/linux-omap-2.6.37rc/0009-ARM-OMAP-add-omap_rev_-macros.patch
new file mode 100644
index 0000000..1c5d8df
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-2.6.37rc/0009-ARM-OMAP-add-omap_rev_-macros.patch
@@ -0,0 +1,81 @@
+From 1beed5ee3301a9756c8cd2672d487c568c562e81 Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@dominion.thruhere.net>
+Date: Tue, 23 Nov 2010 11:40:20 +0100
+Subject: [PATCH 09/29] ARM: OMAP: add omap_rev_* macros
+
+This is just to make the SGX modules build that depend on omap_rev_lt_3_0
+
+Signed-off-by: Koen Kooi <koen@beagleboard.org>
+---
+ arch/arm/plat-omap/include/plat/cpu.h |   55 +++++++++++++++++++++++++++++++++
+ 1 files changed, 55 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
+index 3fd8b40..1a8c347 100644
+--- a/arch/arm/plat-omap/include/plat/cpu.h
++++ b/arch/arm/plat-omap/include/plat/cpu.h
+@@ -394,6 +394,61 @@ IS_OMAP_TYPE(3517, 0x3517)
+ #define OMAP4430_REV_ES2_0	0x44301044
+ 
+ /*
++ * Silicon revisions
++ */
++#define OMAP_ES_1_0		0x00
++#define OMAP_ES_2_0		0x10
++#define OMAP_ES_2_1		0x20
++#define OMAP_ES_3_0		0x30
++#define OMAP_ES_3_1		0x40
++
++#define OMAP_REV_MASK		0x0000ff00
++#define OMAP_REV_BITS		((omap_rev() & OMAP_REV_MASK) >> 8)
++
++#define OMAP_REV_IS(revid)					\
++static inline u8 omap_rev_is_ ##revid (void)			\
++{								\
++	return (OMAP_REV_BITS == OMAP_ES_ ##revid) ? 1 : 0;	\
++}
++
++#define OMAP_REV_LT(revid)					\
++static inline u8 omap_rev_lt_ ##revid (void)			\
++{								\
++	return (OMAP_REV_BITS < OMAP_ES_ ##revid) ? 1 : 0;	\
++}
++
++#define OMAP_REV_LE(revid)					\
++static inline u8 omap_rev_le_ ##revid (void)			\
++{								\
++	return (OMAP_REV_BITS <= OMAP_ES_ ##revid) ? 1 : 0;	\
++}
++
++#define OMAP_REV_GT(revid)					\
++static inline u8 omap_rev_gt_ ##revid (void)			\
++{								\
++	return (OMAP_REV_BITS > OMAP_ES_ ##revid) ? 1 : 0;	\
++}
++
++#define OMAP_REV_GE(revid)					\
++static inline u8 omap_rev_ge_ ##revid (void)			\
++{								\
++	return (OMAP_REV_BITS >= OMAP_ES_ ##revid) ? 1 : 0;	\
++}
++
++#define OMAP_REV_FUNCTIONS(revid)	\
++	OMAP_REV_IS(revid)		\
++	OMAP_REV_LT(revid)		\
++	OMAP_REV_LE(revid)		\
++	OMAP_REV_GT(revid)		\
++	OMAP_REV_GE(revid)
++
++OMAP_REV_FUNCTIONS(1_0)
++OMAP_REV_FUNCTIONS(2_0)
++OMAP_REV_FUNCTIONS(2_1)
++OMAP_REV_FUNCTIONS(3_0)
++OMAP_REV_FUNCTIONS(3_1)
++
++/*
+  * omap_chip bits
+  *
+  * CHIP_IS_OMAP{2420,2430,3430} indicate that a particular structure is
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-2.6.37rc/0010-OMAP-DSS2-enable-hsclk-in-dsi_pll_init-for-OMAP36XX.patch b/recipes-bsp/linux/linux-omap-2.6.37rc/0010-OMAP-DSS2-enable-hsclk-in-dsi_pll_init-for-OMAP36XX.patch
new file mode 100644
index 0000000..d292e2f
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-2.6.37rc/0010-OMAP-DSS2-enable-hsclk-in-dsi_pll_init-for-OMAP36XX.patch
@@ -0,0 +1,31 @@
+From f051874f829ed2e2462c0e64c28e28bd6f942f2d Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Mon, 10 May 2010 20:44:09 -0700
+Subject: [PATCH 10/29] OMAP: DSS2: enable hsclk in dsi_pll_init for OMAP36XX
+
+Signed-off-by: Koen Kooi <koen@beagleboard.org>
+---
+ drivers/video/omap2/dss/dpi.c |    7 ++++++-
+ 1 files changed, 6 insertions(+), 1 deletions(-)
+
+diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
+index 960e977..23047b6 100644
+--- a/drivers/video/omap2/dss/dpi.c
++++ b/drivers/video/omap2/dss/dpi.c
+@@ -177,7 +177,12 @@ int omapdss_dpi_display_enable(struct omap_dss_device *dssdev)
+ 
+ #ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL
+ 	dss_clk_enable(DSS_CLK_FCK2);
+-	r = dsi_pll_init(dssdev, 0, 1);
++
++	if (cpu_is_omap3630())
++		r = dsi_pll_init(dssdev, 1, 1);
++	else
++		r = dsi_pll_init(dssdev, 0, 1);
++
+ 	if (r)
+ 		goto err3;
+ #endif
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-2.6.37rc/0011-omap3-beagleboard-add-WIP-support-for-beagleboardtoy.patch b/recipes-bsp/linux/linux-omap-2.6.37rc/0011-omap3-beagleboard-add-WIP-support-for-beagleboardtoy.patch
new file mode 100644
index 0000000..c800003
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-2.6.37rc/0011-omap3-beagleboard-add-WIP-support-for-beagleboardtoy.patch
@@ -0,0 +1,102 @@
+From 18333339fe5e104c2ddfb2688989a15df0e0f94c Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@beagleboard.org>
+Date: Mon, 20 Dec 2010 11:57:56 +0100
+Subject: [PATCH 11/29] omap3: beagleboard: add WIP support for beagleboardtoys WL12xx board
+
+Based on a patch by Luciano Coelho <luciano.coelho@nokia.com>
+
+Signed-off-by: Koen Kooi <koen@beagleboard.org>
+---
+ arch/arm/mach-omap2/board-omap3beagle.c |   68 +++++++++++++++++++++++++++++++
+ 1 files changed, 68 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index 34f2132..073276b 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -146,6 +146,67 @@ fail0:
+ 
+ char expansionboard_name[16];
+ 
++#if defined(CONFIG_WL1271) || defined(CONFIG_WL1271_MODULE)
++#include <linux/regulator/fixed.h>
++#include <linux/wl12xx.h>
++
++#define OMAP_BEAGLE_WLAN_EN_GPIO    (139)
++#define OMAP_BEAGLE_WLAN_IRQ_GPIO   (137)
++
++struct wl12xx_platform_data omap_beagle_wlan_data __initdata = {
++	.irq = OMAP_GPIO_IRQ(OMAP_BEAGLE_WLAN_IRQ_GPIO),
++	.board_ref_clock = 2, /* 38.4 MHz */
++};
++
++ static struct omap2_hsmmc_info mmcbbt[] = {
++ 	{
++ 		.mmc		= 1,
++ 		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
++ 		.gpio_wp	= 29,
++ 	},
++	{
++		.name           = "wl1271",
++		.mmc            = 2,
++		.caps		= MMC_CAP_4_BIT_DATA,
++		.gpio_wp        = -EINVAL,
++		.gpio_cd        = -EINVAL,
++		.nonremovable   = true,
++	},
++ 	{}	/* Terminator */
++ };
++
++static struct regulator_consumer_supply beagle_vmmc2_supply = {
++	.supply         = "vmmc",
++	.dev_name       = "mmci-omap-hs.1",
++};
++
++static struct regulator_init_data beagle_vmmc2 = {
++	.constraints = {
++		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
++	},
++	.num_consumer_supplies = 1,
++	.consumer_supplies = &beagle_vmmc2_supply,
++};
++
++static struct fixed_voltage_config beagle_vwlan = {
++	.supply_name = "vwl1271",
++	.microvolts = 1800000,  /* 1.8V */
++	.gpio = OMAP_BEAGLE_WLAN_EN_GPIO,
++	.startup_delay = 70000, /* 70ms */
++	.enable_high = 1,
++	.enabled_at_boot = 0,
++	.init_data = &beagle_vmmc2,
++};
++
++static struct platform_device omap_vwlan_device = {
++	.name           = "reg-fixed-voltage",
++	.id             = 1,
++	.dev = {
++		.platform_data = &beagle_vwlan,
++	},
++};
++#endif
++
+ #if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
+ 
+ #include <plat/mcspi.h>
+@@ -382,7 +443,14 @@ static int beagle_twl_gpio_setup(struct device *dev,
+ 	}
+ 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
+ 	mmc[0].gpio_cd = gpio + 0;
++#if defined(CONFIG_WL1271) || defined(CONFIG_WL1271_MODULE)
++	if(!strcmp(expansionboard_name, "fixme-beagletoy")) 
++		omap2_hsmmc_init(mmcbbt);
++	else
++		omap2_hsmmc_init(mmc);
++#else
+ 	omap2_hsmmc_init(mmc);
++#endif
+ 
+ 	/* link regulators to MMC adapters */
+ 	beagle_vmmc1_supply.dev = mmc[0].dev;
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-2.6.37rc/0012-drivers-net-smsc911x-return-ENODEV-if-device-is-not-.patch b/recipes-bsp/linux/linux-omap-2.6.37rc/0012-drivers-net-smsc911x-return-ENODEV-if-device-is-not-.patch
new file mode 100644
index 0000000..1bb4dda
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-2.6.37rc/0012-drivers-net-smsc911x-return-ENODEV-if-device-is-not-.patch
@@ -0,0 +1,29 @@
+From 43b87f69e82217aff2a966559bdf28dcfedc2c8e Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <sakoman@gmail.com>
+Date: Tue, 15 Dec 2009 15:17:44 -0800
+Subject: [PATCH 12/29] drivers: net: smsc911x: return ENODEV if device is not found
+
+Signed-off-by: Steve Sakoman <sakoman@gmail.com>
+---
+ drivers/net/smsc911x.c |    4 +++-
+ 1 files changed, 3 insertions(+), 1 deletions(-)
+
+diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
+index 64bfdae..ba2a00e 100644
+--- a/drivers/net/smsc911x.c
++++ b/drivers/net/smsc911x.c
+@@ -2019,8 +2019,10 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
+ 	}
+ 
+ 	retval = smsc911x_init(dev);
+-	if (retval < 0)
++	if (retval < 0) {
++		retval = -ENODEV;
+ 		goto out_unmap_io_3;
++	}
+ 
+ 	/* configure irq polarity and type before connecting isr */
+ 	if (pdata->config.irq_polarity == SMSC911X_IRQ_POLARITY_ACTIVE_HIGH)
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-2.6.37rc/0013-drivers-input-touchscreen-ads7846-return-ENODEV-if-d.patch b/recipes-bsp/linux/linux-omap-2.6.37rc/0013-drivers-input-touchscreen-ads7846-return-ENODEV-if-d.patch
new file mode 100644
index 0000000..efefda5
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-2.6.37rc/0013-drivers-input-touchscreen-ads7846-return-ENODEV-if-d.patch
@@ -0,0 +1,47 @@
+From 43b7984021e30a9aa9b97c2cf9a9ceb806372709 Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <sakoman@gmail.com>
+Date: Tue, 15 Dec 2009 15:24:10 -0800
+Subject: [PATCH 13/29] drivers: input: touchscreen: ads7846: return ENODEV if device is not found
+
+Signed-off-by: Steve Sakoman <sakoman@gmail.com>
+---
+ drivers/input/touchscreen/ads7846.c |   13 ++++++++++---
+ 1 files changed, 10 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
+index 14ea54b..c775e38 100644
+--- a/drivers/input/touchscreen/ads7846.c
++++ b/drivers/input/touchscreen/ads7846.c
+@@ -1325,11 +1325,18 @@ static int __devinit ads7846_probe(struct spi_device *spi)
+ 	 * the touchscreen, in case it's not connected.
+ 	 */
+ 	if (ts->model == 7845)
+-		ads7845_read12_ser(&spi->dev, PWRDOWN);
++		err = ads7845_read12_ser(&spi->dev, PWRDOWN);
+ 	else
+-		(void) ads7846_read12_ser(&spi->dev,
++		err = ads7846_read12_ser(&spi->dev,
+ 				READ_12BIT_SER(vaux) | ADS_PD10_ALL_ON);
+ 
++	/* if sample is all 0's or all 1's then there is no device on spi */
++	if ( (err == 0x000) || (err == 0xfff)) {
++		dev_info(&spi->dev, "no device detected, test read result was 0x%08X\n", err);
++		err = -ENODEV;
++		goto err_free_irq;
++	}
++
+ 	err = sysfs_create_group(&spi->dev.kobj, &ads784x_attr_group);
+ 	if (err)
+ 		goto err_remove_hwmon;
+@@ -1353,7 +1360,7 @@ static int __devinit ads7846_probe(struct spi_device *spi)
+  err_put_regulator:
+ 	regulator_put(ts->reg);
+  err_free_gpio:
+-	if (ts->gpio_pendown != -1)
++	if (!ts->get_pendown_state && ts->gpio_pendown != -1)
+ 		gpio_free(ts->gpio_pendown);
+  err_cleanup_filter:
+ 	if (ts->filter_cleanup)
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-2.6.37rc/0014-ASoC-enable-audio-capture-by-default-for-twl4030.patch b/recipes-bsp/linux/linux-omap-2.6.37rc/0014-ASoC-enable-audio-capture-by-default-for-twl4030.patch
new file mode 100644
index 0000000..4ef7dd4
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-2.6.37rc/0014-ASoC-enable-audio-capture-by-default-for-twl4030.patch
@@ -0,0 +1,27 @@
+From ebb70888ec3601534601d7524212fbefa24d679e Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Thu, 17 Dec 2009 12:45:20 -0800
+Subject: [PATCH 14/29] ASoC: enable audio capture by default for twl4030
+
+---
+ sound/soc/codecs/twl4030.c |    4 ++--
+ 1 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c
+index cbebec6..430cd10 100644
+--- a/sound/soc/codecs/twl4030.c
++++ b/sound/soc/codecs/twl4030.c
+@@ -56,8 +56,8 @@ static const u8 twl4030_reg[TWL4030_CACHEREGNUM] = {
+ 	0x00, /* REG_OPTION		(0x2)	*/
+ 	0x00, /* REG_UNKNOWN		(0x3)	*/
+ 	0x00, /* REG_MICBIAS_CTL	(0x4)	*/
+-	0x00, /* REG_ANAMICL		(0x5)	*/
+-	0x00, /* REG_ANAMICR		(0x6)	*/
++	0x34, /* REG_ANAMICL		(0x5)	*/
++	0x14, /* REG_ANAMICR		(0x6)	*/
+ 	0x00, /* REG_AVADC_CTL		(0x7)	*/
+ 	0x00, /* REG_ADCMICSEL		(0x8)	*/
+ 	0x00, /* REG_DIGMIXING		(0x9)	*/
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-2.6.37rc/0015-MFD-enable-madc-clock.patch b/recipes-bsp/linux/linux-omap-2.6.37rc/0015-MFD-enable-madc-clock.patch
new file mode 100644
index 0000000..725881c
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-2.6.37rc/0015-MFD-enable-madc-clock.patch
@@ -0,0 +1,51 @@
+From 0bedf8e81896a69ba77e9066ad9545412fd53cf8 Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Sat, 23 Jan 2010 06:26:54 -0800
+Subject: [PATCH 15/29] MFD: enable madc clock
+
+---
+ drivers/mfd/twl-core.c  |    8 ++++++++
+ include/linux/i2c/twl.h |    1 +
+ 2 files changed, 9 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
+index 35275ba..5aa7358 100644
+--- a/drivers/mfd/twl-core.c
++++ b/drivers/mfd/twl-core.c
+@@ -208,6 +208,11 @@
+ 
+ /* Few power values */
+ #define R_CFG_BOOT			0x05
++#define R_GPBR1				0x0C
++
++/* MADC clock values for R_GPBR1 */
++#define MADC_HFCLK_EN			0x80
++#define DEFAULT_MADC_CLK_EN		0x10
+ 
+ /* some fields in R_CFG_BOOT */
+ #define HFCLK_FREQ_19p2_MHZ		(1 << 0)
+@@ -929,6 +934,9 @@ static void clocks_init(struct device *dev,
+ 
+ 	e |= unprotect_pm_master();
+ 	/* effect->MADC+USB ck en */
++	if (twl_has_madc())
++		e |= twl_i2c_write_u8(TWL_MODULE_INTBR,
++				MADC_HFCLK_EN | DEFAULT_MADC_CLK_EN, R_GPBR1);
+ 	e |= twl_i2c_write_u8(TWL_MODULE_PM_MASTER, ctrl, R_CFG_BOOT);
+ 	e |= protect_pm_master();
+ 
+diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
+index c760991..cfdfdd3 100644
+--- a/include/linux/i2c/twl.h
++++ b/include/linux/i2c/twl.h
+@@ -74,6 +74,7 @@
+ 
+ #define TWL_MODULE_USB		TWL4030_MODULE_USB
+ #define TWL_MODULE_AUDIO_VOICE	TWL4030_MODULE_AUDIO_VOICE
++#define TWL_MODULE_INTBR	TWL4030_MODULE_INTBR
+ #define TWL_MODULE_PIH		TWL4030_MODULE_PIH
+ #define TWL_MODULE_MADC		TWL4030_MODULE_MADC
+ #define TWL_MODULE_MAIN_CHARGE	TWL4030_MODULE_MAIN_CHARGE
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-2.6.37rc/0016-MFD-add-twl4030-madc-driver.patch b/recipes-bsp/linux/linux-omap-2.6.37rc/0016-MFD-add-twl4030-madc-driver.patch
new file mode 100644
index 0000000..ae25ba3
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-2.6.37rc/0016-MFD-add-twl4030-madc-driver.patch
@@ -0,0 +1,740 @@
+From ea45cc880d407e9747dafa0efe5ab17ffb5e42d5 Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Thu, 17 Dec 2009 14:19:34 -0800
+Subject: [PATCH 16/29] MFD: add twl4030 madc driver
+
+---
+ drivers/mfd/Kconfig              |   21 ++
+ drivers/mfd/Makefile             |    1 +
+ drivers/mfd/twl4030-madc.c       |  537 ++++++++++++++++++++++++++++++++++++++
+ include/linux/i2c/twl4030-madc.h |  130 +++++++++
+ 4 files changed, 689 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/mfd/twl4030-madc.c
+ create mode 100644 include/linux/i2c/twl4030-madc.h
+
+diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
+index 3a1493b..26ca160 100644
+--- a/drivers/mfd/Kconfig
++++ b/drivers/mfd/Kconfig
+@@ -186,6 +186,27 @@ config TWL4030_CODEC
+ 	select MFD_CORE
+ 	default n
+ 
++config TWL4030_MADC
++	tristate "TWL4030 MADC Driver"
++	depends on TWL4030_CORE
++	help
++	  The TWL4030 Monitoring ADC driver enables the host
++	  processor to monitor analog signals using analog-to-digital
++	  conversions on the input source. TWL4030 MADC provides the
++	  following features:
++	   - Single 10-bit ADC with successive approximation register (SAR) conversion;
++	   - Analog multiplexer for 16 inputs;
++	   - Seven (of the 16) inputs are freely available;
++	   - Battery voltage monitoring;
++	   - Concurrent conversion request management;
++	   - Interrupt signal to Primary Interrupt Handler;
++	   - Averaging feature;
++	   - Selective enable/disable of the averaging feature.
++
++	  Say 'y' here to statically link this module into the kernel or 'm'
++	  to build it as a dinamically loadable module. The module will be
++	  called twl4030-madc.ko
++
+ config TWL6030_PWM
+ 	tristate "TWL6030 PWM (Pulse Width Modulator) Support"
+ 	depends on TWL4030_CORE
+diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
+index f54b365..8c4ccb2 100644
+--- a/drivers/mfd/Makefile
++++ b/drivers/mfd/Makefile
+@@ -39,6 +39,7 @@ obj-$(CONFIG_MENELAUS)		+= menelaus.o
+ obj-$(CONFIG_TWL4030_CORE)	+= twl-core.o twl4030-irq.o twl6030-irq.o
+ obj-$(CONFIG_TWL4030_POWER)    += twl4030-power.o
+ obj-$(CONFIG_TWL4030_CODEC)	+= twl4030-codec.o
++obj-$(CONFIG_TWL4030_MADC)	+= twl4030-madc.o
+ obj-$(CONFIG_TWL6030_PWM)	+= twl6030-pwm.o
+ 
+ obj-$(CONFIG_MFD_MC13XXX)	+= mc13xxx-core.o
+diff --git a/drivers/mfd/twl4030-madc.c b/drivers/mfd/twl4030-madc.c
+new file mode 100644
+index 0000000..4adf880
+--- /dev/null
++++ b/drivers/mfd/twl4030-madc.c
+@@ -0,0 +1,537 @@
++/*
++ * TWL4030 MADC module driver
++ *
++ * Copyright (C) 2008 Nokia Corporation
++ * Mikko Ylinen <mikko.k.ylinen@nokia.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
++ * 02110-1301 USA
++ *
++ */
++
++#include <linux/delay.h>
++#include <linux/fs.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/kernel.h>
++#include <linux/miscdevice.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/slab.h>
++#include <linux/types.h>
++#include <linux/i2c/twl.h>
++#include <linux/i2c/twl4030-madc.h>
++
++#include <asm/uaccess.h>
++
++#define TWL4030_MADC_PFX	"twl4030-madc: "
++
++struct twl4030_madc_data {
++	struct device		*dev;
++	struct mutex		lock;
++	struct work_struct	ws;
++	struct twl4030_madc_request	requests[TWL4030_MADC_NUM_METHODS];
++	int imr;
++	int isr;
++};
++
++static struct twl4030_madc_data *the_madc;
++
++static
++const struct twl4030_madc_conversion_method twl4030_conversion_methods[] = {
++	[TWL4030_MADC_RT] = {
++		.sel	= TWL4030_MADC_RTSELECT_LSB,
++		.avg	= TWL4030_MADC_RTAVERAGE_LSB,
++		.rbase	= TWL4030_MADC_RTCH0_LSB,
++	},
++	[TWL4030_MADC_SW1] = {
++		.sel	= TWL4030_MADC_SW1SELECT_LSB,
++		.avg	= TWL4030_MADC_SW1AVERAGE_LSB,
++		.rbase	= TWL4030_MADC_GPCH0_LSB,
++		.ctrl	= TWL4030_MADC_CTRL_SW1,
++	},
++	[TWL4030_MADC_SW2] = {
++		.sel	= TWL4030_MADC_SW2SELECT_LSB,
++		.avg	= TWL4030_MADC_SW2AVERAGE_LSB,
++		.rbase	= TWL4030_MADC_GPCH0_LSB,
++		.ctrl	= TWL4030_MADC_CTRL_SW2,
++	},
++};
++
++static int twl4030_madc_read(struct twl4030_madc_data *madc, u8 reg)
++{
++	int ret;
++	u8 val;
++
++	ret = twl_i2c_read_u8(TWL4030_MODULE_MADC, &val, reg);
++	if (ret) {
++		dev_dbg(madc->dev, "unable to read register 0x%X\n", reg);
++		return ret;
++	}
++
++	return val;
++}
++
++static void twl4030_madc_write(struct twl4030_madc_data *madc, u8 reg, u8 val)
++{
++	int ret;
++
++	ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, val, reg);
++	if (ret)
++		dev_err(madc->dev, "unable to write register 0x%X\n", reg);
++}
++
++static int twl4030_madc_channel_raw_read(struct twl4030_madc_data *madc, u8 reg)
++{
++	u8 msb, lsb;
++
++	/* For each ADC channel, we have MSB and LSB register pair. MSB address
++	 * is always LSB address+1. reg parameter is the addr of LSB register */
++	msb = twl4030_madc_read(madc, reg + 1);
++	lsb = twl4030_madc_read(madc, reg);
++
++	return (int)(((msb << 8) | lsb) >> 6);
++}
++
++static int twl4030_madc_read_channels(struct twl4030_madc_data *madc,
++		u8 reg_base, u16 channels, int *buf)
++{
++	int count = 0;
++	u8 reg, i;
++
++	if (unlikely(!buf))
++		return 0;
++
++	for (i = 0; i < TWL4030_MADC_MAX_CHANNELS; i++) {
++		if (channels & (1<<i)) {
++			reg = reg_base + 2*i;
++			buf[i] = twl4030_madc_channel_raw_read(madc, reg);
++			count++;
++		}
++	}
++	return count;
++}
++
++static void twl4030_madc_enable_irq(struct twl4030_madc_data *madc, int id)
++{
++	u8 val;
++
++	val = twl4030_madc_read(madc, madc->imr);
++	val &= ~(1 << id);
++	twl4030_madc_write(madc, madc->imr, val);
++}
++
++static void twl4030_madc_disable_irq(struct twl4030_madc_data *madc, int id)
++{
++	u8 val;
++
++	val = twl4030_madc_read(madc, madc->imr);
++	val |= (1 << id);
++	twl4030_madc_write(madc, madc->imr, val);
++}
++
++static irqreturn_t twl4030_madc_irq_handler(int irq, void *_madc)
++{
++	struct twl4030_madc_data *madc = _madc;
++	u8 isr_val, imr_val;
++	int i;
++
++#ifdef CONFIG_LOCKDEP
++	/* WORKAROUND for lockdep forcing IRQF_DISABLED on us, which
++	 * we don't want and can't tolerate.  Although it might be
++	 * friendlier not to borrow this thread context...
++	 */
++	local_irq_enable();
++#endif
++
++	/* Use COR to ack interrupts since we have no shared IRQs in ISRx */
++	isr_val = twl4030_madc_read(madc, madc->isr);
++	imr_val = twl4030_madc_read(madc, madc->imr);
++
++	isr_val &= ~imr_val;
++
++	for (i = 0; i < TWL4030_MADC_NUM_METHODS; i++) {
++
++		if (!(isr_val & (1<<i)))
++			continue;
++
++		twl4030_madc_disable_irq(madc, i);
++		madc->requests[i].result_pending = 1;
++	}
++
++	schedule_work(&madc->ws);
++
++	return IRQ_HANDLED;
++}
++
++static void twl4030_madc_work(struct work_struct *ws)
++{
++	const struct twl4030_madc_conversion_method *method;
++	struct twl4030_madc_data *madc;
++	struct twl4030_madc_request *r;
++	int len, i;
++
++	madc = container_of(ws, struct twl4030_madc_data, ws);
++	mutex_lock(&madc->lock);
++
++	for (i = 0; i < TWL4030_MADC_NUM_METHODS; i++) {
++
++		r = &madc->requests[i];
++
++		/* No pending results for this method, move to next one */
++		if (!r->result_pending)
++			continue;
++
++		method = &twl4030_conversion_methods[r->method];
++
++		/* Read results */
++		len = twl4030_madc_read_channels(madc, method->rbase,
++						 r->channels, r->rbuf);
++
++		/* Return results to caller */
++		if (r->func_cb != NULL) {
++			r->func_cb(len, r->channels, r->rbuf);
++			r->func_cb = NULL;
++		}
++
++		/* Free request */
++		r->result_pending = 0;
++		r->active	  = 0;
++	}
++
++	mutex_unlock(&madc->lock);
++}
++
++static int twl4030_madc_set_irq(struct twl4030_madc_data *madc,
++		struct twl4030_madc_request *req)
++{
++	struct twl4030_madc_request *p;
++
++	p = &madc->requests[req->method];
++
++	memcpy(p, req, sizeof *req);
++
++	twl4030_madc_enable_irq(madc, req->method);
++
++	return 0;
++}
++
++static inline void twl4030_madc_start_conversion(struct twl4030_madc_data *madc,
++		int conv_method)
++{
++	const struct twl4030_madc_conversion_method *method;
++
++	method = &twl4030_conversion_methods[conv_method];
++
++	switch (conv_method) {
++	case TWL4030_MADC_SW1:
++	case TWL4030_MADC_SW2:
++		twl4030_madc_write(madc, method->ctrl, TWL4030_MADC_SW_START);
++		break;
++	case TWL4030_MADC_RT:
++	default:
++		break;
++	}
++}
++
++static int twl4030_madc_wait_conversion_ready(
++		struct twl4030_madc_data *madc,
++		unsigned int timeout_ms, u8 status_reg)
++{
++	unsigned long timeout;
++
++	timeout = jiffies + msecs_to_jiffies(timeout_ms);
++	do {
++		u8 reg;
++
++		reg = twl4030_madc_read(madc, status_reg);
++		if (!(reg & TWL4030_MADC_BUSY) && (reg & TWL4030_MADC_EOC_SW))
++			return 0;
++	} while (!time_after(jiffies, timeout));
++
++	return -EAGAIN;
++}
++
++int twl4030_madc_conversion(struct twl4030_madc_request *req)
++{
++	const struct twl4030_madc_conversion_method *method;
++	u8 ch_msb, ch_lsb;
++	int ret;
++
++	if (unlikely(!req))
++		return -EINVAL;
++
++	mutex_lock(&the_madc->lock);
++
++	/* Do we have a conversion request ongoing */
++	if (the_madc->requests[req->method].active) {
++		ret = -EBUSY;
++		goto out;
++	}
++
++	ch_msb = (req->channels >> 8) & 0xff;
++	ch_lsb = req->channels & 0xff;
++
++	method = &twl4030_conversion_methods[req->method];
++
++	/* Select channels to be converted */
++	twl4030_madc_write(the_madc, method->sel + 1, ch_msb);
++	twl4030_madc_write(the_madc, method->sel, ch_lsb);
++
++	/* Select averaging for all channels if do_avg is set */
++	if (req->do_avg) {
++		twl4030_madc_write(the_madc, method->avg + 1, ch_msb);
++		twl4030_madc_write(the_madc, method->avg, ch_lsb);
++	}
++
++	if ((req->type == TWL4030_MADC_IRQ_ONESHOT) && (req->func_cb != NULL)) {
++		twl4030_madc_set_irq(the_madc, req);
++		twl4030_madc_start_conversion(the_madc, req->method);
++		the_madc->requests[req->method].active = 1;
++		ret = 0;
++		goto out;
++	}
++
++	/* With RT method we should not be here anymore */
++	if (req->method == TWL4030_MADC_RT) {
++		ret = -EINVAL;
++		goto out;
++	}
++
++	twl4030_madc_start_conversion(the_madc, req->method);
++	the_madc->requests[req->method].active = 1;
++
++	/* Wait until conversion is ready (ctrl register returns EOC) */
++	ret = twl4030_madc_wait_conversion_ready(the_madc, 5, method->ctrl);
++	if (ret) {
++		dev_dbg(the_madc->dev, "conversion timeout!\n");
++		the_madc->requests[req->method].active = 0;
++		goto out;
++	}
++
++	ret = twl4030_madc_read_channels(the_madc, method->rbase, req->channels,
++					 req->rbuf);
++
++	the_madc->requests[req->method].active = 0;
++
++out:
++	mutex_unlock(&the_madc->lock);
++
++	return ret;
++}
++EXPORT_SYMBOL(twl4030_madc_conversion);
++
++static int twl4030_madc_set_current_generator(struct twl4030_madc_data *madc,
++		int chan, int on)
++{
++	int ret;
++	u8 regval;
++
++	/* Current generator is only available for ADCIN0 and ADCIN1. NB:
++	 * ADCIN1 current generator only works when AC or VBUS is present */
++	if (chan > 1)
++		return EINVAL;
++
++	ret = twl_i2c_read_u8(TWL4030_MODULE_MAIN_CHARGE,
++				  &regval, TWL4030_BCI_BCICTL1);
++	if (on)
++		regval |= (chan) ? TWL4030_BCI_ITHEN : TWL4030_BCI_TYPEN;
++	else
++		regval &= (chan) ? ~TWL4030_BCI_ITHEN : ~TWL4030_BCI_TYPEN;
++	ret = twl_i2c_write_u8(TWL4030_MODULE_MAIN_CHARGE,
++				   regval, TWL4030_BCI_BCICTL1);
++
++	return ret;
++}
++
++static int twl4030_madc_set_power(struct twl4030_madc_data *madc, int on)
++{
++	u8 regval;
++
++	regval = twl4030_madc_read(madc, TWL4030_MADC_CTRL1);
++	if (on)
++		regval |= TWL4030_MADC_MADCON;
++	else
++		regval &= ~TWL4030_MADC_MADCON;
++	twl4030_madc_write(madc, TWL4030_MADC_CTRL1, regval);
++
++	return 0;
++}
++
++static long twl4030_madc_ioctl(struct file *filp, unsigned int cmd,
++			       unsigned long arg)
++{
++	struct twl4030_madc_user_parms par;
++	int val, ret;
++
++	ret = copy_from_user(&par, (void __user *) arg, sizeof(par));
++	if (ret) {
++		dev_dbg(the_madc->dev, "copy_from_user: %d\n", ret);
++		return -EACCES;
++	}
++
++	switch (cmd) {
++	case TWL4030_MADC_IOCX_ADC_RAW_READ: {
++		struct twl4030_madc_request req;
++		if (par.channel >= TWL4030_MADC_MAX_CHANNELS)
++			return -EINVAL;
++
++		req.channels = (1 << par.channel);
++		req.do_avg	= par.average;
++		req.method	= TWL4030_MADC_SW1;
++		req.func_cb	= NULL;
++
++		val = twl4030_madc_conversion(&req);
++		if (val <= 0) {
++			par.status = -1;
++		} else {
++			par.status = 0;
++			par.result = (u16)req.rbuf[par.channel];
++		}
++		break;
++					     }
++	default:
++		return -EINVAL;
++	}
++
++	ret = copy_to_user((void __user *) arg, &par, sizeof(par));
++	if (ret) {
++		dev_dbg(the_madc->dev, "copy_to_user: %d\n", ret);
++		return -EACCES;
++	}
++
++	return 0;
++}
++
++static struct file_operations twl4030_madc_fileops = {
++	.owner = THIS_MODULE,
++	.unlocked_ioctl = twl4030_madc_ioctl
++};
++
++static struct miscdevice twl4030_madc_device = {
++	.minor = MISC_DYNAMIC_MINOR,
++	.name = "twl4030-madc",
++	.fops = &twl4030_madc_fileops
++};
++
++static int __init twl4030_madc_probe(struct platform_device *pdev)
++{
++	struct twl4030_madc_data *madc;
++	struct twl4030_madc_platform_data *pdata = pdev->dev.platform_data;
++	int ret;
++	u8 regval;
++
++	madc = kzalloc(sizeof *madc, GFP_KERNEL);
++	if (!madc)
++		return -ENOMEM;
++
++	if (!pdata) {
++		dev_dbg(&pdev->dev, "platform_data not available\n");
++		ret = -EINVAL;
++		goto err_pdata;
++	}
++
++	madc->imr = (pdata->irq_line == 1) ? TWL4030_MADC_IMR1 : TWL4030_MADC_IMR2;
++	madc->isr = (pdata->irq_line == 1) ? TWL4030_MADC_ISR1 : TWL4030_MADC_ISR2;
++
++	ret = misc_register(&twl4030_madc_device);
++	if (ret) {
++		dev_dbg(&pdev->dev, "could not register misc_device\n");
++		goto err_misc;
++	}
++	twl4030_madc_set_power(madc, 1);
++	twl4030_madc_set_current_generator(madc, 0, 1);
++
++	/* Enable ADCIN3 through 6 */
++	ret = twl_i2c_read_u8(TWL4030_MODULE_USB,
++				  &regval, TWL4030_USB_CARKIT_ANA_CTRL);
++
++	regval |= TWL4030_USB_SEL_MADC_MCPC;
++
++	ret = twl_i2c_write_u8(TWL4030_MODULE_USB,
++				regval, TWL4030_USB_CARKIT_ANA_CTRL);
++
++
++	ret = twl_i2c_read_u8(TWL4030_MODULE_MAIN_CHARGE,
++				  &regval, TWL4030_BCI_BCICTL1);
++
++	regval |= TWL4030_BCI_MESBAT;
++
++	ret = twl_i2c_write_u8(TWL4030_MODULE_MAIN_CHARGE,
++				   regval, TWL4030_BCI_BCICTL1);
++
++	ret = request_irq(platform_get_irq(pdev, 0), twl4030_madc_irq_handler,
++			  0, "twl4030_madc", madc);
++	if (ret) {
++		dev_dbg(&pdev->dev, "could not request irq\n");
++		goto err_irq;
++	}
++
++	platform_set_drvdata(pdev, madc);
++	mutex_init(&madc->lock);
++	INIT_WORK(&madc->ws, twl4030_madc_work);
++
++	the_madc = madc;
++
++	return 0;
++
++err_irq:
++	misc_deregister(&twl4030_madc_device);
++
++err_misc:
++err_pdata:
++	kfree(madc);
++
++	return ret;
++}
++
++static int __exit twl4030_madc_remove(struct platform_device *pdev)
++{
++	struct twl4030_madc_data *madc = platform_get_drvdata(pdev);
++
++	twl4030_madc_set_power(madc, 0);
++	twl4030_madc_set_current_generator(madc, 0, 0);
++	free_irq(platform_get_irq(pdev, 0), madc);
++	cancel_work_sync(&madc->ws);
++	misc_deregister(&twl4030_madc_device);
++
++	return 0;
++}
++
++static struct platform_driver twl4030_madc_driver = {
++	.probe		= twl4030_madc_probe,
++	.remove		= __exit_p(twl4030_madc_remove),
++	.driver		= {
++		.name	= "twl4030_madc",
++		.owner	= THIS_MODULE,
++	},
++};
++
++static int __init twl4030_madc_init(void)
++{
++	return platform_driver_register(&twl4030_madc_driver);
++}
++module_init(twl4030_madc_init);
++
++static void __exit twl4030_madc_exit(void)
++{
++	platform_driver_unregister(&twl4030_madc_driver);
++}
++module_exit(twl4030_madc_exit);
++
++MODULE_ALIAS("platform:twl4030-madc");
++MODULE_AUTHOR("Nokia Corporation");
++MODULE_DESCRIPTION("twl4030 ADC driver");
++MODULE_LICENSE("GPL");
++
+diff --git a/include/linux/i2c/twl4030-madc.h b/include/linux/i2c/twl4030-madc.h
+new file mode 100644
+index 0000000..341a665
+--- /dev/null
++++ b/include/linux/i2c/twl4030-madc.h
+@@ -0,0 +1,130 @@
++/*
++ * include/linux/i2c/twl4030-madc.h
++ *
++ * TWL4030 MADC module driver header
++ *
++ * Copyright (C) 2008 Nokia Corporation
++ * Mikko Ylinen <mikko.k.ylinen@nokia.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
++ * 02110-1301 USA
++ *
++ */
++
++#ifndef _TWL4030_MADC_H
++#define _TWL4030_MADC_H
++
++struct twl4030_madc_conversion_method {
++	u8 sel;
++	u8 avg;
++	u8 rbase;
++	u8 ctrl;
++};
++
++#define TWL4030_MADC_MAX_CHANNELS 16
++
++struct twl4030_madc_request {
++	u16 channels;
++	u16 do_avg;
++	u16 method;
++	u16 type;
++	int active;
++	int result_pending;
++	int rbuf[TWL4030_MADC_MAX_CHANNELS];
++	void (*func_cb)(int len, int channels, int *buf);
++};
++
++enum conversion_methods {
++	TWL4030_MADC_RT,
++	TWL4030_MADC_SW1,
++	TWL4030_MADC_SW2,
++	TWL4030_MADC_NUM_METHODS
++};
++
++enum sample_type {
++	TWL4030_MADC_WAIT,
++	TWL4030_MADC_IRQ_ONESHOT,
++	TWL4030_MADC_IRQ_REARM
++};
++
++#define TWL4030_MADC_CTRL1		0x00
++#define TWL4030_MADC_CTRL2		0x01
++
++#define TWL4030_MADC_RTSELECT_LSB	0x02
++#define TWL4030_MADC_SW1SELECT_LSB	0x06
++#define TWL4030_MADC_SW2SELECT_LSB	0x0A
++
++#define TWL4030_MADC_RTAVERAGE_LSB	0x04
++#define TWL4030_MADC_SW1AVERAGE_LSB	0x08
++#define TWL4030_MADC_SW2AVERAGE_LSB	0x0C
++
++#define TWL4030_MADC_CTRL_SW1		0x12
++#define TWL4030_MADC_CTRL_SW2		0x13
++
++#define TWL4030_MADC_RTCH0_LSB		0x17
++#define TWL4030_MADC_GPCH0_LSB		0x37
++
++#define TWL4030_MADC_MADCON		(1<<0)	/* MADC power on */
++#define TWL4030_MADC_BUSY		(1<<0)	/* MADC busy */
++#define TWL4030_MADC_EOC_SW		(1<<1)	/* MADC conversion completion */
++#define TWL4030_MADC_SW_START		(1<<5)  /* MADC SWx start conversion */
++
++#define	TWL4030_MADC_ADCIN0		(1<<0)
++#define	TWL4030_MADC_ADCIN1		(1<<1)
++#define	TWL4030_MADC_ADCIN2		(1<<2)
++#define	TWL4030_MADC_ADCIN3		(1<<3)
++#define	TWL4030_MADC_ADCIN4		(1<<4)
++#define	TWL4030_MADC_ADCIN5		(1<<5)
++#define	TWL4030_MADC_ADCIN6		(1<<6)
++#define	TWL4030_MADC_ADCIN7		(1<<7)
++#define	TWL4030_MADC_ADCIN8		(1<<8)
++#define	TWL4030_MADC_ADCIN9		(1<<9)
++#define	TWL4030_MADC_ADCIN10		(1<<10)
++#define	TWL4030_MADC_ADCIN11		(1<<11)
++#define	TWL4030_MADC_ADCIN12		(1<<12)
++#define	TWL4030_MADC_ADCIN13		(1<<13)
++#define	TWL4030_MADC_ADCIN14		(1<<14)
++#define	TWL4030_MADC_ADCIN15		(1<<15)
++
++/* Fixed channels */
++#define TWL4030_MADC_BTEMP		TWL4030_MADC_ADCIN1
++#define TWL4030_MADC_VBUS		TWL4030_MADC_ADCIN8
++#define TWL4030_MADC_VBKB		TWL4030_MADC_ADCIN9
++#define	TWL4030_MADC_ICHG		TWL4030_MADC_ADCIN10
++#define TWL4030_MADC_VCHG		TWL4030_MADC_ADCIN11
++#define	TWL4030_MADC_VBAT		TWL4030_MADC_ADCIN12
++
++/* BCI related - XXX To be moved elsewhere */
++#define TWL4030_BCI_BCICTL1		0x23
++#define	TWL4030_BCI_MESBAT		(1<<1)
++#define	TWL4030_BCI_TYPEN		(1<<4)
++#define	TWL4030_BCI_ITHEN		(1<<3)
++
++/* USB related - XXX To be moved elsewhere */
++#define TWL4030_USB_CARKIT_ANA_CTRL		0xBB
++#define TWL4030_USB_SEL_MADC_MCPC		(1<<3)
++
++#define TWL4030_MADC_IOC_MAGIC '`'
++#define TWL4030_MADC_IOCX_ADC_RAW_READ		_IO(TWL4030_MADC_IOC_MAGIC, 0)
++
++struct twl4030_madc_user_parms {
++	int channel;
++	int average;
++	int status;
++	u16 result;
++};
++
++int twl4030_madc_conversion(struct twl4030_madc_request *conv);
++
++#endif
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-2.6.37rc/0017-ARM-OMAP-Add-twl4030-madc-support-to-Overo.patch b/recipes-bsp/linux/linux-omap-2.6.37rc/0017-ARM-OMAP-Add-twl4030-madc-support-to-Overo.patch
new file mode 100644
index 0000000..19eec18
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-2.6.37rc/0017-ARM-OMAP-Add-twl4030-madc-support-to-Overo.patch
@@ -0,0 +1,32 @@
+From 3bc70a68d2cfd1d41995bb7f33f2e4005542f62b Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Thu, 17 Dec 2009 14:27:15 -0800
+Subject: [PATCH 17/29] ARM: OMAP: Add twl4030 madc support to Overo
+
+---
+ arch/arm/mach-omap2/board-overo.c |    5 +++++
+ 1 files changed, 5 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
+index cb26e5d..17f066a 100644
+--- a/arch/arm/mach-omap2/board-overo.c
++++ b/arch/arm/mach-omap2/board-overo.c
+@@ -369,10 +369,15 @@ static struct twl4030_codec_data overo_codec_data = {
+ 
+ /* mmc2 (WLAN) and Bluetooth don't use twl4030 regulators */
+ 
++static struct twl4030_madc_platform_data overo_madc_data = {
++	.irq_line	= 1,
++};
++
+ static struct twl4030_platform_data overo_twldata = {
+ 	.irq_base	= TWL4030_IRQ_BASE,
+ 	.irq_end	= TWL4030_IRQ_END,
+ 	.gpio		= &overo_gpio_data,
++	.madc		= &overo_madc_data,
+ 	.usb		= &overo_usb_data,
+ 	.codec		= &overo_codec_data,
+ 	.vmmc1		= &overo_vmmc1,
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-2.6.37rc/0018-ARM-OMAP-Add-twl4030-madc-support-to-Beagle.patch b/recipes-bsp/linux/linux-omap-2.6.37rc/0018-ARM-OMAP-Add-twl4030-madc-support-to-Beagle.patch
new file mode 100644
index 0000000..aeb4146
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-2.6.37rc/0018-ARM-OMAP-Add-twl4030-madc-support-to-Beagle.patch
@@ -0,0 +1,35 @@
+From afa4132d5e29ed90154fec8cd97f891c86ce748c Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Thu, 17 Dec 2009 14:32:36 -0800
+Subject: [PATCH 18/29] ARM: OMAP: Add twl4030 madc support to Beagle
+
+---
+ arch/arm/mach-omap2/board-omap3beagle.c |    5 +++++
+ 1 files changed, 5 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index 073276b..781844c 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -578,6 +578,10 @@ static struct twl4030_codec_data beagle_codec_data = {
+ 	.audio = &beagle_audio_data,
+ };
+ 
++static struct twl4030_madc_platform_data beagle_madc_data = {
++	.irq_line	= 1,
++};
++
+ static struct twl4030_platform_data beagle_twldata = {
+ 	.irq_base	= TWL4030_IRQ_BASE,
+ 	.irq_end	= TWL4030_IRQ_END,
+@@ -586,6 +590,7 @@ static struct twl4030_platform_data beagle_twldata = {
+ 	.usb		= &beagle_usb_data,
+ 	.gpio		= &beagle_gpio_data,
+ 	.codec		= &beagle_codec_data,
++	.madc		= &beagle_madc_data,
+ 	.vmmc1		= &beagle_vmmc1,
+ 	.vsim		= &beagle_vsim,
+ 	.vdac		= &beagle_vdac,
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-2.6.37rc/0019-OMAP-DSS2-Add-support-for-Samsung-LTE430WQ-F0C-panel.patch b/recipes-bsp/linux/linux-omap-2.6.37rc/0019-OMAP-DSS2-Add-support-for-Samsung-LTE430WQ-F0C-panel.patch
new file mode 100644
index 0000000..8607d71
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-2.6.37rc/0019-OMAP-DSS2-Add-support-for-Samsung-LTE430WQ-F0C-panel.patch
@@ -0,0 +1,173 @@
+From e6b15754a20c0306fb20d061358da67b5dd218cd Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Tue, 23 Feb 2010 14:40:27 -0800
+Subject: [PATCH 19/29] OMAP: DSS2: Add support for Samsung LTE430WQ-F0C panel
+
+---
+ .../omap2/displays/panel-samsung-lte430wq-f0c.c    |  154 ++++++++++++++++++++
+ 1 files changed, 154 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/video/omap2/displays/panel-samsung-lte430wq-f0c.c
+
+diff --git a/drivers/video/omap2/displays/panel-samsung-lte430wq-f0c.c b/drivers/video/omap2/displays/panel-samsung-lte430wq-f0c.c
+new file mode 100644
+index 0000000..6a29f9c
+--- /dev/null
++++ b/drivers/video/omap2/displays/panel-samsung-lte430wq-f0c.c
+@@ -0,0 +1,154 @@
++/*
++ * LCD panel driver for Samsung LTE430WQ-F0C
++ *
++ * Author: Steve Sakoman <steve@sakoman.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program.  If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#include <linux/module.h>
++#include <linux/delay.h>
++
++#include <plat/display.h>
++
++static struct omap_video_timings samsung_lte_timings = {
++	.x_res = 480,
++	.y_res = 272,
++
++	.pixel_clock	= 9200,
++
++	.hsw		= 41,
++	.hfp		= 8,
++	.hbp		= 45-41,
++
++	.vsw		= 10,
++	.vfp		= 4,
++	.vbp		= 12-10,
++};
++
++static int samsung_lte_panel_power_on(struct omap_dss_device *dssdev)
++{
++	int r;
++
++	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
++		return 0;
++
++	r = omapdss_dpi_display_enable(dssdev);
++	if (r)
++		goto err0;
++
++	if (dssdev->platform_enable) {
++		r = dssdev->platform_enable(dssdev);
++		if (r)
++			goto err1;
++	}
++
++	return 0;
++err1:
++	omapdss_dpi_display_disable(dssdev);
++err0:
++	return r;
++}
++
++static void samsung_lte_panel_power_off(struct omap_dss_device *dssdev)
++{
++	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
++		return;
++
++	if (dssdev->platform_disable)
++		dssdev->platform_disable(dssdev);
++
++	omapdss_dpi_display_disable(dssdev);
++}
++
++static int samsung_lte_panel_probe(struct omap_dss_device *dssdev)
++{
++	dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
++		OMAP_DSS_LCD_IHS;
++	dssdev->panel.timings = samsung_lte_timings;
++
++	return 0;
++}
++
++static void samsung_lte_panel_remove(struct omap_dss_device *dssdev)
++{
++}
++
++static int samsung_lte_panel_enable(struct omap_dss_device *dssdev)
++{
++	int r = 0;
++
++	r = samsung_lte_panel_power_on(dssdev);
++	if (r)
++		return r;
++
++	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
++
++	return 0;
++}
++
++static void samsung_lte_panel_disable(struct omap_dss_device *dssdev)
++{
++	samsung_lte_panel_power_off(dssdev);
++
++	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
++}
++
++static int samsung_lte_panel_suspend(struct omap_dss_device *dssdev)
++{
++	samsung_lte_panel_disable(dssdev);
++	dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
++	return 0;
++}
++
++static int samsung_lte_panel_resume(struct omap_dss_device *dssdev)
++{
++	int r;
++
++	r = samsung_lte_panel_enable(dssdev);
++	if (r)
++		return r;
++
++	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
++
++	return 0;
++}
++
++static struct omap_dss_driver samsung_lte_driver = {
++	.probe		= samsung_lte_panel_probe,
++	.remove		= samsung_lte_panel_remove,
++
++	.enable		= samsung_lte_panel_enable,
++	.disable	= samsung_lte_panel_disable,
++	.suspend	= samsung_lte_panel_suspend,
++	.resume		= samsung_lte_panel_resume,
++
++	.driver         = {
++		.name   = "samsung_lte_panel",
++		.owner  = THIS_MODULE,
++	},
++};
++
++static int __init samsung_lte_panel_drv_init(void)
++{
++	return omap_dss_register_driver(&samsung_lte_driver);
++}
++
++static void __exit samsung_lte_panel_drv_exit(void)
++{
++	omap_dss_unregister_driver(&samsung_lte_driver);
++}
++
++module_init(samsung_lte_panel_drv_init);
++module_exit(samsung_lte_panel_drv_exit);
++MODULE_LICENSE("GPL");
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-2.6.37rc/0020-OMAP-DSS2-Add-support-for-LG-Philips-LB035Q02-panel.patch b/recipes-bsp/linux/linux-omap-2.6.37rc/0020-OMAP-DSS2-Add-support-for-LG-Philips-LB035Q02-panel.patch
new file mode 100644
index 0000000..ad148d0
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-2.6.37rc/0020-OMAP-DSS2-Add-support-for-LG-Philips-LB035Q02-panel.patch
@@ -0,0 +1,299 @@
+From 6861df53ce9212b348fba806f5a86404c1de8a95 Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Thu, 17 Dec 2009 15:05:30 -0800
+Subject: [PATCH 20/29] OMAP: DSS2: Add support for LG Philips LB035Q02 panel
+
+---
+ drivers/video/omap2/displays/Kconfig               |   12 +
+ drivers/video/omap2/displays/Makefile              |    2 +
+ .../omap2/displays/panel-lgphilips-lb035q02.c      |  244 ++++++++++++++++++++
+ 3 files changed, 258 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/video/omap2/displays/panel-lgphilips-lb035q02.c
+
+diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig
+index 12327bb..48e872f 100644
+--- a/drivers/video/omap2/displays/Kconfig
++++ b/drivers/video/omap2/displays/Kconfig
+@@ -7,6 +7,18 @@ config PANEL_GENERIC
+ 	  Generic panel driver.
+ 	  Used for DVI output for Beagle and OMAP3 SDP.
+ 
++config PANEL_LGPHILIPS_LB035Q02
++	tristate "LG.Philips LB035Q02 LCD Panel"
++	depends on OMAP2_DSS
++	help
++	  LCD Panel used on Overo Palo35
++
++config PANEL_SAMSUNG_LTE430WQ_F0C
++        tristate "Samsung LTE430WQ-F0C LCD Panel"
++        depends on OMAP2_DSS
++        help
++          LCD Panel used on Overo Palo43
++
+ config PANEL_SHARP_LS037V7DW01
+         tristate "Sharp LS037V7DW01 LCD Panel"
+         depends on OMAP2_DSS
+diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile
+index aa38609..2fb1a57 100644
+--- a/drivers/video/omap2/displays/Makefile
++++ b/drivers/video/omap2/displays/Makefile
+@@ -1,4 +1,6 @@
+ obj-$(CONFIG_PANEL_GENERIC) += panel-generic.o
++obj-$(CONFIG_PANEL_LGPHILIPS_LB035Q02) += panel-lgphilips-lb035q02.o
++obj-$(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C) += panel-samsung-lte430wq-f0c.o
+ obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
+ obj-$(CONFIG_PANEL_SHARP_LQ043T1DG01) += panel-sharp-lq043t1dg01.o
+ 
+diff --git a/drivers/video/omap2/displays/panel-lgphilips-lb035q02.c b/drivers/video/omap2/displays/panel-lgphilips-lb035q02.c
+new file mode 100644
+index 0000000..4ad709d
+--- /dev/null
++++ b/drivers/video/omap2/displays/panel-lgphilips-lb035q02.c
+@@ -0,0 +1,244 @@
++/*
++ * LCD panel driver for LG.Philips LB035Q02
++ *
++ * Author: Steve Sakoman <steve@sakoman.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program.  If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#include <linux/module.h>
++#include <linux/delay.h>
++#include <linux/spi/spi.h>
++
++#include <plat/display.h>
++
++static struct spi_device	*spidev;
++
++static struct omap_video_timings lb035q02_timings = {
++	.x_res = 320,
++	.y_res = 240,
++
++	.pixel_clock	= 6500,
++
++	.hsw		= 2,
++	.hfp		= 20,
++	.hbp		= 68,
++
++	.vsw		= 2,
++	.vfp		= 4,
++	.vbp		= 18,
++};
++
++static int lb035q02_write_reg(u8 reg, u16 val)
++{
++	struct spi_message msg;
++	struct spi_transfer index_xfer = {
++		.len		= 3,
++		.cs_change	= 1,
++	};
++	struct spi_transfer value_xfer = {
++		.len		= 3,
++	};
++	u8	buffer[16];
++
++	spi_message_init(&msg);
++
++	/* register index */
++	buffer[0] = 0x70;
++	buffer[1] = 0x00;
++	buffer[2] = reg & 0x7f;
++	index_xfer.tx_buf = buffer;
++	spi_message_add_tail(&index_xfer, &msg);
++
++	/* register value */
++	buffer[4] = 0x72;
++	buffer[5] = val >> 8;
++	buffer[6] = val;
++	value_xfer.tx_buf = buffer + 4;
++	spi_message_add_tail(&value_xfer, &msg);
++
++	return spi_sync(spidev, &msg);
++}
++
++static int lb035q02_panel_power_on(struct omap_dss_device *dssdev)
++{
++	int r;
++
++	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
++		return 0;
++
++	r = omapdss_dpi_display_enable(dssdev);
++	if (r)
++		goto err0;
++
++	if (dssdev->platform_enable) {
++		r = dssdev->platform_enable(dssdev);
++		if (r)
++			goto err1;
++	}
++
++	/* Panel init sequence from page 28 of the spec */
++	lb035q02_write_reg(0x01, 0x6300);
++	lb035q02_write_reg(0x02, 0x0200);
++	lb035q02_write_reg(0x03, 0x0177);
++	lb035q02_write_reg(0x04, 0x04c7);
++	lb035q02_write_reg(0x05, 0xffc0);
++	lb035q02_write_reg(0x06, 0xe806);
++	lb035q02_write_reg(0x0a, 0x4008);
++	lb035q02_write_reg(0x0b, 0x0000);
++	lb035q02_write_reg(0x0d, 0x0030);
++	lb035q02_write_reg(0x0e, 0x2800);
++	lb035q02_write_reg(0x0f, 0x0000);
++	lb035q02_write_reg(0x16, 0x9f80);
++	lb035q02_write_reg(0x17, 0x0a0f);
++	lb035q02_write_reg(0x1e, 0x00c1);
++	lb035q02_write_reg(0x30, 0x0300);
++	lb035q02_write_reg(0x31, 0x0007);
++	lb035q02_write_reg(0x32, 0x0000);
++	lb035q02_write_reg(0x33, 0x0000);
++	lb035q02_write_reg(0x34, 0x0707);
++	lb035q02_write_reg(0x35, 0x0004);
++	lb035q02_write_reg(0x36, 0x0302);
++	lb035q02_write_reg(0x37, 0x0202);
++	lb035q02_write_reg(0x3a, 0x0a0d);
++	lb035q02_write_reg(0x3b, 0x0806);
++
++	return 0;
++err1:
++	omapdss_dpi_display_disable(dssdev);
++err0:
++	return r;
++}
++
++static void lb035q02_panel_power_off(struct omap_dss_device *dssdev)
++{
++	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
++		return;
++
++	if (dssdev->platform_disable)
++		dssdev->platform_disable(dssdev);
++
++	omapdss_dpi_display_disable(dssdev);
++}
++
++static int lb035q02_panel_probe(struct omap_dss_device *dssdev)
++{
++	dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
++		OMAP_DSS_LCD_IHS;
++	dssdev->panel.timings = lb035q02_timings;
++
++	return 0;
++}
++
++static void lb035q02_panel_remove(struct omap_dss_device *dssdev)
++{
++}
++
++static int lb035q02_panel_enable(struct omap_dss_device *dssdev)
++{
++	int r = 0;
++
++	r = lb035q02_panel_power_on(dssdev);
++	if (r)
++		return r;
++
++	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
++
++	return 0;
++}
++
++static void lb035q02_panel_disable(struct omap_dss_device *dssdev)
++{
++	lb035q02_panel_power_off(dssdev);
++
++	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
++}
++
++static int lb035q02_panel_suspend(struct omap_dss_device *dssdev)
++{
++	lb035q02_panel_disable(dssdev);
++	dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
++	return 0;
++}
++
++static int lb035q02_panel_resume(struct omap_dss_device *dssdev)
++{
++	int r;
++
++	r = lb035q02_panel_power_on(dssdev);
++	if (r)
++		return r;
++
++	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
++
++	return 0;
++}
++
++static struct omap_dss_driver lb035q02_driver = {
++	.probe		= lb035q02_panel_probe,
++	.remove		= lb035q02_panel_remove,
++
++	.enable		= lb035q02_panel_enable,
++	.disable	= lb035q02_panel_disable,
++	.suspend	= lb035q02_panel_suspend,
++	.resume		= lb035q02_panel_resume,
++
++	.driver         = {
++		.name   = "lgphilips_lb035q02_panel",
++		.owner  = THIS_MODULE,
++	},
++};
++
++static int __devinit lb035q02_panel_spi_probe(struct spi_device *spi)
++{
++	spidev = spi;
++	return 0;
++}
++
++static int __devexit lb035q02_panel_spi_remove(struct spi_device *spi)
++{
++	return 0;
++}
++
++static struct spi_driver lb035q02_spi_driver = {
++	.driver		= {
++		.name	= "lgphilips_lb035q02_panel-spi",
++		.owner	= THIS_MODULE,
++	},
++	.probe		= lb035q02_panel_spi_probe,
++	.remove		= __devexit_p (lb035q02_panel_spi_remove),
++};
++
++static int __init lb035q02_panel_drv_init(void)
++{
++	int r;
++	r = spi_register_driver(&lb035q02_spi_driver);
++	if (r != 0)
++		pr_err("lgphilips_lb035q02: Unable to register SPI driver: %d\n", r);
++
++	r = omap_dss_register_driver(&lb035q02_driver);
++	if (r != 0)
++		pr_err("lgphilips_lb035q02: Unable to register panel driver: %d\n", r);
++
++	return r;
++}
++
++static void __exit lb035q02_panel_drv_exit(void)
++{
++	spi_unregister_driver(&lb035q02_spi_driver);
++	omap_dss_unregister_driver(&lb035q02_driver);
++}
++
++module_init(lb035q02_panel_drv_init);
++module_exit(lb035q02_panel_drv_exit);
++MODULE_LICENSE("GPL");
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-2.6.37rc/0021-OMAP-DSS2-add-bootarg-for-selecting-svideo-or-compos.patch b/recipes-bsp/linux/linux-omap-2.6.37rc/0021-OMAP-DSS2-add-bootarg-for-selecting-svideo-or-compos.patch
new file mode 100644
index 0000000..86e9c40
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-2.6.37rc/0021-OMAP-DSS2-add-bootarg-for-selecting-svideo-or-compos.patch
@@ -0,0 +1,75 @@
+From 9e206307dbd65d557a57563c086af5089e52b2c8 Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Tue, 19 Jan 2010 21:19:15 -0800
+Subject: [PATCH 21/29] OMAP: DSS2: add bootarg for selecting svideo or composite for tv output
+
+also add pal-16 and ntsc-16 omapfb.mode settings for 16bpp
+---
+ drivers/video/omap2/dss/venc.c           |   22 ++++++++++++++++++++++
+ drivers/video/omap2/omapfb/omapfb-main.c |   10 +++++++++-
+ 2 files changed, 31 insertions(+), 1 deletions(-)
+
+diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
+index eff3505..e1f4aab 100644
+--- a/drivers/video/omap2/dss/venc.c
++++ b/drivers/video/omap2/dss/venc.c
+@@ -87,6 +87,11 @@
+ #define VENC_OUTPUT_TEST			0xC8
+ #define VENC_DAC_B__DAC_C			0xC8
+ 
++static char *tv_connection;
++
++module_param_named(tvcable, tv_connection, charp, 0);
++MODULE_PARM_DESC(tvcable, "TV connection type (svideo, composite)");
++
+ struct venc_config {
+ 	u32 f_control;
+ 	u32 vidout_ctrl;
+@@ -459,6 +464,23 @@ static int venc_panel_probe(struct omap_dss_device *dssdev)
+ {
+ 	dssdev->panel.timings = omap_dss_pal_timings;
+ 
++	/* Allow the TV output to be overriden */
++	if (tv_connection) {
++		if (strcmp(tv_connection, "svideo") == 0) {
++			printk(KERN_INFO
++				"omapdss: tv output is svideo.\n");
++			dssdev->phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO;
++		} else if (strcmp(tv_connection, "composite") == 0) {
++			printk(KERN_INFO
++				"omapdss: tv output is composite.\n");
++			dssdev->phy.venc.type = OMAP_DSS_VENC_TYPE_COMPOSITE;
++		} else {
++			printk(KERN_INFO
++				"omapdss: unsupported output type'%s'.\n",
++				tv_connection);
++		}
++	}
++
+ 	return 0;
+ }
+ 
+diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
+index 6a704f1..7ee833f 100644
+--- a/drivers/video/omap2/omapfb/omapfb-main.c
++++ b/drivers/video/omap2/omapfb/omapfb-main.c
+@@ -2036,7 +2036,15 @@ static int omapfb_mode_to_timings(const char *mode_str,
+ 	int r;
+ 
+ #ifdef CONFIG_OMAP2_DSS_VENC
+-	if (strcmp(mode_str, "pal") == 0) {
++	if (strcmp(mode_str, "pal-16") == 0) {
++		*timings = omap_dss_pal_timings;
++		*bpp = 16;
++		return 0;
++	} else if (strcmp(mode_str, "ntsc-16") == 0) {
++		*timings = omap_dss_ntsc_timings;
++		*bpp = 16;
++		return 0;
++	} else if (strcmp(mode_str, "pal") == 0) {
+ 		*timings = omap_dss_pal_timings;
+ 		*bpp = 24;
+ 		return 0;
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-2.6.37rc/0022-ARM-OMAP2-mmc-twl4030-move-clock-input-selection-pri.patch b/recipes-bsp/linux/linux-omap-2.6.37rc/0022-ARM-OMAP2-mmc-twl4030-move-clock-input-selection-pri.patch
new file mode 100644
index 0000000..ffa0a0e
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-2.6.37rc/0022-ARM-OMAP2-mmc-twl4030-move-clock-input-selection-pri.patch
@@ -0,0 +1,39 @@
+From 3924e990868742c19e5cd3e84191a01b55249079 Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Sun, 24 Jan 2010 09:33:56 -0800
+Subject: [PATCH 22/29] ARM: OMAP2: mmc-twl4030: move clock input selection prior to vcc test
+
+otherwise it is not executed on systems that use non-twl regulators
+---
+ arch/arm/mach-omap2/hsmmc.c |   14 ++++++--------
+ 1 files changed, 6 insertions(+), 8 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
+index 34272e4..a74631d 100644
+--- a/arch/arm/mach-omap2/hsmmc.c
++++ b/arch/arm/mach-omap2/hsmmc.c
+@@ -186,15 +186,13 @@ static void hsmmc23_before_set_reg(struct device *dev, int slot,
+ 	if (mmc->slots[0].remux)
+ 		mmc->slots[0].remux(dev, slot, power_on);
+ 
+-	if (power_on) {
+-		/* Only MMC2 supports a CLKIN */
+-		if (mmc->slots[0].internal_clock) {
+-			u32 reg;
++	/* Only MMC2 supports a CLKIN */
++	if (mmc->slots[0].internal_clock) {
++		u32 reg;
+ 
+-			reg = omap_ctrl_readl(control_devconf1_offset);
+-			reg |= OMAP2_MMCSDIO2ADPCLKISEL;
+-			omap_ctrl_writel(reg, control_devconf1_offset);
+-		}
++		reg = omap_ctrl_readl(control_devconf1_offset);
++		reg |= OMAP2_MMCSDIO2ADPCLKISEL;
++		omap_ctrl_writel(reg, control_devconf1_offset);
+ 	}
+ }
+ 
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-2.6.37rc/0023-RTC-add-support-for-backup-battery-recharge.patch b/recipes-bsp/linux/linux-omap-2.6.37rc/0023-RTC-add-support-for-backup-battery-recharge.patch
new file mode 100644
index 0000000..a815311
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-2.6.37rc/0023-RTC-add-support-for-backup-battery-recharge.patch
@@ -0,0 +1,55 @@
+From ade216c2689a2dae645ca95fa443ee8eacfafb67 Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Thu, 4 Feb 2010 12:26:22 -0800
+Subject: [PATCH 23/29] RTC: add support for backup battery recharge
+
+---
+ drivers/rtc/rtc-twl.c |   25 +++++++++++++++++++++++++
+ 1 files changed, 25 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/rtc/rtc-twl.c b/drivers/rtc/rtc-twl.c
+index ed1b868..33a8598 100644
+--- a/drivers/rtc/rtc-twl.c
++++ b/drivers/rtc/rtc-twl.c
+@@ -30,6 +30,23 @@
+ 
+ #include <linux/i2c/twl.h>
+ 
++/*
++ * PM_RECEIVER block register offsets (use TWL4030_MODULE_PM_RECEIVER)
++ */
++#define REG_BB_CFG	0x12
++
++/* PM_RECEIVER  BB_CFG bitfields */
++#define BIT_PM_RECEIVER_BB_CFG_BBCHEN           0x10
++#define BIT_PM_RECEIVER_BB_CFG_BBSEL            0x0C
++#define BIT_PM_RECEIVER_BB_CFG_BBSEL_2V5        0x00
++#define BIT_PM_RECEIVER_BB_CFG_BBSEL_3V0        0x04
++#define BIT_PM_RECEIVER_BB_CFG_BBSEL_3V1        0x08
++#define BIT_PM_RECEIVER_BB_CFG_BBSEL_3v2        0x0c
++#define BIT_PM_RECEIVER_BB_CFG_BBISEL           0x03
++#define BIT_PM_RECEIVER_BB_CFG_BBISEL_25UA      0x00
++#define BIT_PM_RECEIVER_BB_CFG_BBISEL_150UA     0x01
++#define BIT_PM_RECEIVER_BB_CFG_BBISEL_500UA     0x02
++#define BIT_PM_RECEIVER_BB_CFG_BBISEL_1MA       0x03
+ 
+ /*
+  * RTC block register offsets (use TWL_MODULE_RTC)
+@@ -508,6 +525,14 @@ static int __devinit twl_rtc_probe(struct platform_device *pdev)
+ 	if (ret < 0)
+ 		goto out2;
+ 
++	/* enable backup battery charging */
++	/* use a conservative 25uA @ 3.1V */
++	ret = twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
++		BIT_PM_RECEIVER_BB_CFG_BBCHEN |
++		BIT_PM_RECEIVER_BB_CFG_BBSEL_3V1 |
++		BIT_PM_RECEIVER_BB_CFG_BBISEL_25UA,
++		REG_BB_CFG);
++
+ 	return ret;
+ 
+ out2:
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-2.6.37rc/0024-ARM-OMAP-automatically-set-musb-mode-in-platform-dat.patch b/recipes-bsp/linux/linux-omap-2.6.37rc/0024-ARM-OMAP-automatically-set-musb-mode-in-platform-dat.patch
new file mode 100644
index 0000000..bd7b068
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-2.6.37rc/0024-ARM-OMAP-automatically-set-musb-mode-in-platform-dat.patch
@@ -0,0 +1,49 @@
+From 6a2f14bdd390695f5d88fb8ea18df8f80bddfc9d Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Wed, 24 Feb 2010 10:37:22 -0800
+Subject: [PATCH 24/29] ARM: OMAP: automatically set musb mode in platform data based on CONFIG options
+
+---
+ arch/arm/mach-omap2/board-omap3beagle.c |    6 ++++++
+ arch/arm/mach-omap2/board-overo.c       |    6 ++++++
+ 2 files changed, 12 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index 781844c..006dc26 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -759,7 +759,13 @@ static struct omap_board_mux board_mux[] __initdata = {
+ 
+ static struct omap_musb_board_data musb_board_data = {
+ 	.interface_type		= MUSB_INTERFACE_ULPI,
++#if defined(CONFIG_USB_MUSB_OTG)
+ 	.mode			= MUSB_OTG,
++#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
++	.mode			= MUSB_PERIPHERAL,
++#else
++	.mode			= MUSB_HOST,
++#endif
+ 	.power			= 100,
+ };
+ 
+diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
+index 17f066a..b28a9d5 100644
+--- a/arch/arm/mach-omap2/board-overo.c
++++ b/arch/arm/mach-omap2/board-overo.c
+@@ -447,7 +447,13 @@ static struct omap_board_mux board_mux[] __initdata = {
+ 
+ static struct omap_musb_board_data musb_board_data = {
+ 	.interface_type		= MUSB_INTERFACE_ULPI,
++#if defined(CONFIG_USB_MUSB_OTG)
+ 	.mode			= MUSB_OTG,
++#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
++	.mode			= MUSB_PERIPHERAL,
++#else
++	.mode			= MUSB_HOST,
++#endif
+ 	.power			= 100,
+ };
+ 
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-2.6.37rc/0025-OMAP-DSS2-check-for-both-cpu-type-and-revision-rathe.patch b/recipes-bsp/linux/linux-omap-2.6.37rc/0025-OMAP-DSS2-check-for-both-cpu-type-and-revision-rathe.patch
new file mode 100644
index 0000000..1261c5b
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-2.6.37rc/0025-OMAP-DSS2-check-for-both-cpu-type-and-revision-rathe.patch
@@ -0,0 +1,34 @@
+From 6e383eb63993e011b6bdec84e3eb001e6b9e00a1 Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Mon, 10 May 2010 13:59:14 -0700
+Subject: [PATCH 25/29] OMAP: DSS2: check for both cpu type and revision, rather than just revision
+
+---
+ drivers/video/omap2/dss/dispc.c |    4 ++--
+ 1 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
+index fa40fa5..133916a 100644
+--- a/drivers/video/omap2/dss/dispc.c
++++ b/drivers/video/omap2/dss/dispc.c
+@@ -2101,7 +2101,7 @@ void dispc_set_parallel_interface_mode(enum omap_parallel_interface_mode mode)
+ static bool _dispc_lcd_timings_ok(int hsw, int hfp, int hbp,
+ 		int vsw, int vfp, int vbp)
+ {
+-	if (cpu_is_omap24xx() || omap_rev() < OMAP3430_REV_ES3_0) {
++	if (cpu_is_omap24xx() || (cpu_is_omap34xx() && omap_rev_lt_3_0())) {
+ 		if (hsw < 1 || hsw > 64 ||
+ 				hfp < 1 || hfp > 256 ||
+ 				hbp < 1 || hbp > 256 ||
+@@ -2134,7 +2134,7 @@ static void _dispc_set_lcd_timings(int hsw, int hfp, int hbp,
+ {
+ 	u32 timing_h, timing_v;
+ 
+-	if (cpu_is_omap24xx() || omap_rev() < OMAP3430_REV_ES3_0) {
++	if (cpu_is_omap24xx() || (cpu_is_omap34xx() && omap_rev_lt_3_0())) {
+ 		timing_h = FLD_VAL(hsw-1, 5, 0) | FLD_VAL(hfp-1, 15, 8) |
+ 			FLD_VAL(hbp-1, 27, 20);
+ 
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-2.6.37rc/0026-OMAP-DSS2-Add-DSS2-support-for-Overo.patch b/recipes-bsp/linux/linux-omap-2.6.37rc/0026-OMAP-DSS2-Add-DSS2-support-for-Overo.patch
new file mode 100644
index 0000000..b31165c
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-2.6.37rc/0026-OMAP-DSS2-Add-DSS2-support-for-Overo.patch
@@ -0,0 +1,355 @@
+From 66db8210263893e9ffd4478c36a3a1a89bdaff37 Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Fri, 18 Dec 2009 06:39:24 -0800
+Subject: [PATCH 26/29] OMAP: DSS2: Add DSS2 support for Overo
+
+---
+ arch/arm/mach-omap2/board-overo.c |  238 +++++++++++++++++++++++++++++++------
+ 1 files changed, 204 insertions(+), 34 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
+index b28a9d5..8a44c17 100644
+--- a/arch/arm/mach-omap2/board-overo.c
++++ b/arch/arm/mach-omap2/board-overo.c
+@@ -28,6 +28,7 @@
+ #include <linux/platform_device.h>
+ #include <linux/i2c/twl.h>
+ #include <linux/regulator/machine.h>
++#include <linux/spi/spi.h>
+ 
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/nand.h>
+@@ -41,10 +42,13 @@
+ 
+ #include <plat/board.h>
+ #include <plat/common.h>
++#include <plat/display.h>
+ #include <mach/gpio.h>
+ #include <plat/gpmc.h>
+ #include <mach/hardware.h>
+ #include <plat/nand.h>
++#include <plat/mcspi.h>
++#include <plat/mux.h>
+ #include <plat/usb.h>
+ 
+ #include "mux.h"
+@@ -68,8 +72,6 @@
+ #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
+ 	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+ 
+-#include <plat/mcspi.h>
+-#include <linux/spi/spi.h>
+ #include <linux/spi/ads7846.h>
+ 
+ static struct omap2_mcspi_device_config ads7846_mcspi_config = {
+@@ -94,18 +96,6 @@ static struct ads7846_platform_data ads7846_config = {
+ 	.keep_vref_on		= 1,
+ };
+ 
+-static struct spi_board_info overo_spi_board_info[] __initdata = {
+-	{
+-		.modalias		= "ads7846",
+-		.bus_num		= 1,
+-		.chip_select		= 0,
+-		.max_speed_hz		= 1500000,
+-		.controller_data	= &ads7846_mcspi_config,
+-		.irq			= OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN),
+-		.platform_data		= &ads7846_config,
+-	}
+-};
+-
+ static void __init overo_ads7846_init(void)
+ {
+ 	if ((gpio_request(OVERO_GPIO_PENDOWN, "ADS7846_PENDOWN") == 0) &&
+@@ -115,9 +105,6 @@ static void __init overo_ads7846_init(void)
+ 		printk(KERN_ERR "could not obtain gpio for ADS7846_PENDOWN\n");
+ 		return;
+ 	}
+-
+-	spi_register_board_info(overo_spi_board_info,
+-			ARRAY_SIZE(overo_spi_board_info));
+ }
+ 
+ #else
+@@ -233,6 +220,139 @@ static inline void __init overo_init_smsc911x(void)
+ static inline void __init overo_init_smsc911x(void) { return; }
+ #endif
+ 
++/* DSS */
++static int lcd_enabled;
++static int dvi_enabled;
++
++#define OVERO_GPIO_LCD_EN 144
++#define OVERO_GPIO_LCD_BL 145
++
++static void __init overo_display_init(void)
++{
++	if ((gpio_request(OVERO_GPIO_LCD_EN, "OVERO_GPIO_LCD_EN") == 0) &&
++	    (gpio_direction_output(OVERO_GPIO_LCD_EN, 1) == 0))
++		gpio_export(OVERO_GPIO_LCD_EN, 0);
++	else
++		printk(KERN_ERR "could not obtain gpio for "
++					"OVERO_GPIO_LCD_EN\n");
++
++	if ((gpio_request(OVERO_GPIO_LCD_BL, "OVERO_GPIO_LCD_BL") == 0) &&
++	    (gpio_direction_output(OVERO_GPIO_LCD_BL, 1) == 0))
++		gpio_export(OVERO_GPIO_LCD_BL, 0);
++	else
++		printk(KERN_ERR "could not obtain gpio for "
++					"OVERO_GPIO_LCD_BL\n");
++}
++
++static int overo_panel_enable_dvi(struct omap_dss_device *dssdev)
++{
++	if (lcd_enabled) {
++		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
++		return -EINVAL;
++	}
++	dvi_enabled = 1;
++
++	return 0;
++}
++
++static void overo_panel_disable_dvi(struct omap_dss_device *dssdev)
++{
++	dvi_enabled = 0;
++}
++
++static struct omap_dss_device overo_dvi_device = {
++	.type			= OMAP_DISPLAY_TYPE_DPI,
++	.name			= "dvi",
++	.driver_name		= "generic_panel",
++	.phy.dpi.data_lines	= 24,
++	.platform_enable	= overo_panel_enable_dvi,
++	.platform_disable	= overo_panel_disable_dvi,
++};
++
++static struct omap_dss_device overo_tv_device = {
++	.name = "tv",
++	.driver_name = "venc",
++	.type = OMAP_DISPLAY_TYPE_VENC,
++	.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
++};
++
++static int overo_panel_enable_lcd(struct omap_dss_device *dssdev)
++{
++	if (dvi_enabled) {
++		printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
++		return -EINVAL;
++	}
++
++	gpio_set_value(OVERO_GPIO_LCD_EN, 1);
++	gpio_set_value(OVERO_GPIO_LCD_BL, 1);
++	lcd_enabled = 1;
++	return 0;
++}
++
++static void overo_panel_disable_lcd(struct omap_dss_device *dssdev)
++{
++	gpio_set_value(OVERO_GPIO_LCD_EN, 0);
++	gpio_set_value(OVERO_GPIO_LCD_BL, 0);
++	lcd_enabled = 0;
++}
++
++#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
++	defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
++static struct omap_dss_device overo_lcd35_device = {
++	.type			= OMAP_DISPLAY_TYPE_DPI,
++	.name			= "lcd35",
++	.driver_name		= "lgphilips_lb035q02_panel",
++	.phy.dpi.data_lines	= 24,
++	.platform_enable	= overo_panel_enable_lcd,
++	.platform_disable	= overo_panel_disable_lcd,
++};
++#endif
++
++#if defined(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C) || \
++	defined(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C_MODULE)
++static struct omap_dss_device overo_lcd43_device = {
++	.type			= OMAP_DISPLAY_TYPE_DPI,
++	.name			= "lcd43",
++	.driver_name		= "samsung_lte_panel",
++	.phy.dpi.data_lines	= 24,
++	.platform_enable	= overo_panel_enable_lcd,
++	.platform_disable	= overo_panel_disable_lcd,
++};
++#endif
++
++static struct omap_dss_device *overo_dss_devices[] = {
++	&overo_dvi_device,
++	&overo_tv_device,
++#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
++	defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
++	&overo_lcd35_device,
++#endif
++#if defined(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C) || \
++	defined(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C_MODULE)
++	&overo_lcd43_device,
++#endif
++};
++
++static struct omap_dss_board_info overo_dss_data = {
++	.num_devices	= ARRAY_SIZE(overo_dss_devices),
++	.devices	= overo_dss_devices,
++	.default_device	= &overo_dvi_device,
++};
++
++static struct platform_device overo_dss_device = {
++	.name          = "omapdss",
++	.id            = -1,
++	.dev            = {
++		.platform_data = &overo_dss_data,
++	},
++};
++
++static struct regulator_consumer_supply overo_vdda_dac_supply =
++	REGULATOR_SUPPLY("vdda_dac", "omapdss");
++
++static struct regulator_consumer_supply overo_vdds_dsi_supply =
++	REGULATOR_SUPPLY("vdds_dsi", "omapdss");
++
+ static struct mtd_partition overo_nand_partitions[] = {
+ 	{
+ 		.name           = "xloader",
+@@ -358,6 +478,37 @@ static struct regulator_init_data overo_vmmc1 = {
+ 	.consumer_supplies	= &overo_vmmc1_supply,
+ };
+ 
++/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
++static struct regulator_init_data overo_vdac = {
++	.constraints = {
++		.min_uV			= 1800000,
++		.max_uV			= 1800000,
++		.valid_modes_mask	= REGULATOR_MODE_NORMAL
++					| REGULATOR_MODE_STANDBY,
++		.valid_ops_mask		= REGULATOR_CHANGE_MODE
++					| REGULATOR_CHANGE_STATUS,
++	},
++	.num_consumer_supplies	= 1,
++	.consumer_supplies	= &overo_vdda_dac_supply,
++};
++
++/* VPLL2 for digital video outputs */
++static struct regulator_init_data overo_vpll2 = {
++	.constraints = {
++		.name			= "VDVI",
++		.min_uV			= 1800000,
++		.max_uV			= 1800000,
++		.valid_modes_mask	= REGULATOR_MODE_NORMAL
++					| REGULATOR_MODE_STANDBY,
++		.valid_ops_mask		= REGULATOR_CHANGE_MODE
++					| REGULATOR_CHANGE_STATUS,
++	},
++	.num_consumer_supplies	= 1,
++	.consumer_supplies	= &overo_vdds_dsi_supply,
++};
++
++/* mmc2 (WLAN) and Bluetooth don't use twl4030 regulators */
++
+ static struct twl4030_codec_audio_data overo_audio_data = {
+ 	.audio_mclk = 26000000,
+ };
+@@ -367,8 +518,6 @@ static struct twl4030_codec_data overo_codec_data = {
+ 	.audio = &overo_audio_data,
+ };
+ 
+-/* mmc2 (WLAN) and Bluetooth don't use twl4030 regulators */
+-
+ static struct twl4030_madc_platform_data overo_madc_data = {
+ 	.irq_line	= 1,
+ };
+@@ -381,6 +530,8 @@ static struct twl4030_platform_data overo_twldata = {
+ 	.usb		= &overo_usb_data,
+ 	.codec		= &overo_codec_data,
+ 	.vmmc1		= &overo_vmmc1,
++	.vdac		= &overo_vdac,
++	.vpll2		= &overo_vpll2,
+ };
+ 
+ static struct i2c_board_info __initdata overo_i2c_boardinfo[] = {
+@@ -401,23 +552,41 @@ static int __init overo_i2c_init(void)
+ 	return 0;
+ }
+ 
+-static struct platform_device overo_lcd_device = {
+-	.name		= "overo_lcd",
+-	.id		= -1,
+-};
+-
+-static struct omap_lcd_config overo_lcd_config __initdata = {
+-	.ctrl_name	= "internal",
++static struct spi_board_info overo_spi_board_info[] __initdata = {
++#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
++	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
++	{
++		.modalias		= "ads7846",
++		.bus_num		= 1,
++		.chip_select		= 0,
++		.max_speed_hz		= 1500000,
++		.controller_data	= &ads7846_mcspi_config,
++		.irq			= OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN),
++		.platform_data		= &ads7846_config,
++	},
++#endif
++#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
++	defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
++	{
++		.modalias		= "lgphilips_lb035q02_panel-spi",
++		.bus_num		= 1,
++		.chip_select		= 1,
++		.max_speed_hz		= 500000,
++		.mode			= SPI_MODE_3,
++	},
++#endif
+ };
+ 
+-static struct omap_board_config_kernel overo_config[] __initdata = {
+-	{ OMAP_TAG_LCD,		&overo_lcd_config },
+-};
++static int __init overo_spi_init(void)
++{
++	overo_ads7846_init();
++	spi_register_board_info(overo_spi_board_info,
++			ARRAY_SIZE(overo_spi_board_info));
++	return 0;
++}
+ 
+ static void __init overo_init_irq(void)
+ {
+-	omap_board_config = overo_config;
+-	omap_board_config_size = ARRAY_SIZE(overo_config);
+ 	omap2_init_common_infrastructure();
+ 	omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
+ 				  mt46h32m32lf6_sdrc_params);
+@@ -425,7 +594,7 @@ static void __init overo_init_irq(void)
+ }
+ 
+ static struct platform_device *overo_devices[] __initdata = {
+-	&overo_lcd_device,
++	&overo_dss_device,
+ };
+ 
+ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+@@ -466,8 +635,9 @@ static void __init overo_init(void)
+ 	overo_flash_init();
+ 	usb_musb_init(&musb_board_data);
+ 	usb_ehci_init(&ehci_pdata);
+-	overo_ads7846_init();
++	overo_spi_init();
+ 	overo_init_smsc911x();
++	overo_display_init();
+ 
+ 	/* Ensure SDRC pins are mux'd for self-refresh */
+ 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+@@ -510,7 +680,7 @@ static void __init overo_init(void)
+ 					"OVERO_GPIO_USBH_CPEN\n");
+ }
+ 
+-MACHINE_START(OVERO, "Gumstix Overo")
++MACHINE_START(OVERO, "Gumstsix Overo")
+ 	.boot_params	= 0x80000100,
+ 	.map_io		= omap3_map_io,
+ 	.reserve	= omap_reserve,
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-2.6.37rc/0027-Add-defines-to-set-config-options-in-GPMC-per-CS-con.patch b/recipes-bsp/linux/linux-omap-2.6.37rc/0027-Add-defines-to-set-config-options-in-GPMC-per-CS-con.patch
new file mode 100644
index 0000000..6e9d3c0
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-2.6.37rc/0027-Add-defines-to-set-config-options-in-GPMC-per-CS-con.patch
@@ -0,0 +1,80 @@
+From 98d0c3ce9209fe34699ec99aa90efab39fe05c36 Mon Sep 17 00:00:00 2001
+From: Philip Balister <balister@nomad.(none)>
+Date: Wed, 17 Feb 2010 14:51:39 -0800
+Subject: [PATCH 27/29] Add defines to set config options in GPMC per CS control registers.
+
+---
+ arch/arm/plat-omap/include/plat/gpmc.h |   36 ++++++++++++++++++++++++++++++++
+ 1 files changed, 36 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h
+index 85ded59..1a6c748 100644
+--- a/arch/arm/plat-omap/include/plat/gpmc.h
++++ b/arch/arm/plat-omap/include/plat/gpmc.h
+@@ -46,6 +46,11 @@
+ #define GPMC_ECC_WRITE		1 /* Reset Hardware ECC for write */
+ #define GPMC_ECC_READSYN	2 /* Reset before syndrom is read back */
+ 
++#define GPMC_CONFIG		0x50
++#define GPMC_STATUS		0x54
++#define GPMC_CS0_BASE		0x60
++#define GPMC_CS_SIZE		0x30
++
+ #define GPMC_CONFIG1_WRAPBURST_SUPP     (1 << 31)
+ #define GPMC_CONFIG1_READMULTIPLE_SUPP  (1 << 30)
+ #define GPMC_CONFIG1_READTYPE_ASYNC     (0 << 29)
+@@ -63,6 +68,7 @@
+ #define GPMC_CONFIG1_DEVICESIZE_16      GPMC_CONFIG1_DEVICESIZE(1)
+ #define GPMC_CONFIG1_DEVICETYPE(val)    ((val & 3) << 10)
+ #define GPMC_CONFIG1_DEVICETYPE_NOR     GPMC_CONFIG1_DEVICETYPE(0)
++#define GPMC_CONFIG1_DEVICETYPE_NAND    GPMC_CONFIG1_DEVICETYPE(2)
+ #define GPMC_CONFIG1_MUXADDDATA         (1 << 9)
+ #define GPMC_CONFIG1_TIME_PARA_GRAN     (1 << 4)
+ #define GPMC_CONFIG1_FCLK_DIV(val)      (val & 3)
+@@ -79,6 +85,35 @@
+ #define GPMC_PREFETCH_STATUS_FIFO_CNT(val)	((val >> 24) & 0x7F)
+ #define GPMC_PREFETCH_STATUS_COUNT(val)	(val & 0x00003fff)
+ 
++#define GPMC_CONFIG2_CSWROFFTIME(val)	((val & 31) << 16)
++#define GPMC_CONFIG2_CSRDOFFTIME(val)	((val & 31) << 8)
++#define GPMC_CONFIG2_CSEXTRADELAY	(1 << 7)
++#define GPMC_CONFIG2_CSONTIME(val)	(val & 15)
++
++#define GPMC_CONFIG3_ADVWROFFTIME(val)	((val & 31) << 16)
++#define GPMC_CONFIG3_ADVRDOFFTIME(val)	((val & 31) << 8)
++#define GPMC_CONFIG3_ADVEXTRADELAY	(1 << 7)
++#define GPMC_CONFIG3_ADVONTIME(val)	(val & 15)
++
++#define GPMC_CONFIG4_WEOFFTIME(val)	((val & 31) << 24)
++#define GPMC_CONFIG4_WEEXTRADELAY	(1 << 23)
++#define GPMC_CONFIG4_WEONTIME(val)	((val & 15) << 16)
++#define GPMC_CONFIG4_OEOFFTIME(val)	((val & 31) << 8)
++#define GPMC_CONFIG4_OEEXTRADELAY	(1 << 7)
++#define GPMC_CONFIG4_OEONTIME(val)	(val & 15)
++
++#define GPMC_CONFIG5_PAGEBURSTACCESSTIME(val)	((val & 15) << 24)
++#define GPMC_CONFIG5_RDACCESSTIME(val)	((val & 31) << 16)
++#define GPMC_CONFIG5_WRCYCLETIME(val)	((val & 31) << 8)
++#define GPMC_CONFIG5_RDCYCLETIME(val)	(val & 31)
++
++#define GPMC_CONFIG6_WRACCESSTIME(val)	((val & 31) << 24)
++#define GPMC_CONFIG6_WRDATAONADMUXBUS(val)	((val & 15) << 16)
++#define GPMC_CONFIG6_CYCLE2CYCLEDELAY(val)	((val & 15) << 8)
++#define GPMC_CONFIG6_CYCLE2CYCLESAMECSEN	(1 << 7)
++#define GPMC_CONFIG6_CYCLE2CYCLEDIFFCSEN	(1 << 6)
++#define GPMC_CONFIG6_BUSTURNAROUND(val)	(val & 15)
++
+ /*
+  * Note that all values in this struct are in nanoseconds except sync_clk
+  * (which is in picoseconds), while the register values are in gpmc_fck cycles.
+@@ -133,6 +168,7 @@ extern int gpmc_cs_reserved(int cs);
+ extern int gpmc_prefetch_enable(int cs, int dma_mode,
+ 					unsigned int u32_count, int is_write);
+ extern int gpmc_prefetch_reset(int cs);
++extern int gpmc_prefetch_status(void);
+ extern void omap3_gpmc_save_context(void);
+ extern void omap3_gpmc_restore_context(void);
+ extern void gpmc_init(void);
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-2.6.37rc/0028-Add-functions-to-dma.c-to-set-address-and-length-for.patch b/recipes-bsp/linux/linux-omap-2.6.37rc/0028-Add-functions-to-dma.c-to-set-address-and-length-for.patch
new file mode 100644
index 0000000..0ae578d
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-2.6.37rc/0028-Add-functions-to-dma.c-to-set-address-and-length-for.patch
@@ -0,0 +1,83 @@
+From 5469329878e4bdb38fe39fc95676d9b752b1528f Mon Sep 17 00:00:00 2001
+From: Philip Balister <philip@opensdr.com>
+Date: Thu, 22 Apr 2010 19:41:58 -0700
+Subject: [PATCH 28/29] Add functions to dma.c to set address and length for src and dest.
+
+---
+ arch/arm/plat-omap/dma.c              |   30 ++++++++++++++++++++++++++++++
+ arch/arm/plat-omap/include/plat/dma.h |    4 ++++
+ 2 files changed, 34 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
+index c4b2b47..f28f756 100644
+--- a/arch/arm/plat-omap/dma.c
++++ b/arch/arm/plat-omap/dma.c
+@@ -471,6 +471,21 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
+ }
+ EXPORT_SYMBOL(omap_set_dma_src_burst_mode);
+ 
++void omap_set_dma_src_addr_size(int lch, unsigned int addr, int elem_count)
++{
++
++	if (cpu_class_is_omap1()) {
++		p->dma_write(addr >> 16, CSSA, lch);
++		//p->dma_write((u16)addr, CSSA_L, lch);
++	}
++
++	if (cpu_class_is_omap2())
++		p->dma_write(addr, CSSA, lch);
++
++	p->dma_write(elem_count, CEN, lch);
++}
++EXPORT_SYMBOL_GPL(omap_set_dma_src_addr_size);
++
+ /* Note that dest_port is only for OMAP1 */
+ void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
+ 			      unsigned long dest_start,
+@@ -561,6 +576,21 @@ void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
+ }
+ EXPORT_SYMBOL(omap_set_dma_dest_burst_mode);
+ 
++void omap_set_dma_dest_addr_size(int lch, unsigned int addr, int elem_count)
++{
++
++	if (cpu_class_is_omap1()) {
++		p->dma_write(addr >> 16, CDSA, lch);
++		//p->dma_write((u16)addr, CDSA_L, lch);
++	}
++
++	if (cpu_class_is_omap2())
++		p->dma_write(addr, CDSA, lch);
++
++	p->dma_write(elem_count, CEN, lch);
++}
++EXPORT_SYMBOL_GPL(omap_set_dma_dest_addr_size);
++
+ static inline void omap_enable_channel_irq(int lch)
+ {
+ 	u32 status;
+diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h
+index d1c916f..1e7243e 100644
+--- a/arch/arm/plat-omap/include/plat/dma.h
++++ b/arch/arm/plat-omap/include/plat/dma.h
+@@ -462,6 +462,8 @@ extern void omap_set_dma_src_index(int lch, int eidx, int fidx);
+ extern void omap_set_dma_src_data_pack(int lch, int enable);
+ extern void omap_set_dma_src_burst_mode(int lch,
+ 					enum omap_dma_burst_mode burst_mode);
++extern void omap_set_dma_src_addr_size(int lch, unsigned int addr,
++				int elem_count);
+ 
+ extern void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
+ 				     unsigned long dest_start,
+@@ -470,6 +472,8 @@ extern void omap_set_dma_dest_index(int lch, int eidx, int fidx);
+ extern void omap_set_dma_dest_data_pack(int lch, int enable);
+ extern void omap_set_dma_dest_burst_mode(int lch,
+ 					 enum omap_dma_burst_mode burst_mode);
++extern void omap_set_dma_dest_addr_size(int lch, unsigned int addr,
++					int elem_count);
+ 
+ extern void omap_set_dma_params(int lch,
+ 				struct omap_dma_channel_params *params);
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-2.6.37rc/0029-usrp-embedded-Add-driver-for-USRP-Embedded-FPGA-inte.patch b/recipes-bsp/linux/linux-omap-2.6.37rc/0029-usrp-embedded-Add-driver-for-USRP-Embedded-FPGA-inte.patch
new file mode 100644
index 0000000..9a7133f
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-2.6.37rc/0029-usrp-embedded-Add-driver-for-USRP-Embedded-FPGA-inte.patch
@@ -0,0 +1,1889 @@
+From 511a2c7822e68d081de3cefa8a2a82815da6ce78 Mon Sep 17 00:00:00 2001
+From: Philip Balister <balister@moose.(none)>
+Date: Wed, 13 Jan 2010 14:35:39 -0500
+Subject: [PATCH 29/29] usrp-embedded : Add driver for USRP Embedded FPGA interface.
+
+---
+ arch/arm/mach-omap2/board-overo.c |  176 +++++-
+ drivers/misc/Kconfig              |    9 +
+ drivers/misc/Makefile             |    1 +
+ drivers/misc/usrp_e.c             | 1481 +++++++++++++++++++++++++++++++++++++
+ include/linux/usrp_e.h            |   87 +++
+ 5 files changed, 1750 insertions(+), 4 deletions(-)
+ create mode 100644 drivers/misc/usrp_e.c
+ create mode 100644 include/linux/usrp_e.h
+
+diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
+index 8a44c17..8686015 100644
+--- a/arch/arm/mach-omap2/board-overo.c
++++ b/arch/arm/mach-omap2/board-overo.c
+@@ -35,6 +35,8 @@
+ #include <linux/mtd/partitions.h>
+ #include <linux/mmc/host.h>
+ 
++#include <linux/spi/spi.h>
++
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+ #include <asm/mach/flash.h>
+@@ -63,6 +65,8 @@
+ #define OVERO_GPIO_USBH_NRESET	183
+ 
+ #define NAND_BLOCK_SIZE SZ_128K
++#define GPMC_CS0_BASE  0x60
++#define GPMC_CS_SIZE   0x30
+ 
+ #define OVERO_SMSC911X_CS      5
+ #define OVERO_SMSC911X_GPIO    176
+@@ -164,7 +168,9 @@ static struct platform_device overo_smsc911x2_device = {
+ 
+ static struct platform_device *smsc911x_devices[] = {
+ 	&overo_smsc911x_device,
++#if 0
+ 	&overo_smsc911x2_device,
++#endif
+ };
+ 
+ static inline void __init overo_init_smsc911x(void)
+@@ -194,6 +200,7 @@ static inline void __init overo_init_smsc911x(void)
+ 
+ 	/* set up second smsc911x chip */
+ 
++#if 0
+ 	if (gpmc_cs_request(OVERO_SMSC911X2_CS, SZ_16M, &cs_mem_base2) < 0) {
+ 		printk(KERN_ERR "Failed request for GPMC mem for smsc911x2\n");
+ 		return;
+@@ -213,6 +220,7 @@ static inline void __init overo_init_smsc911x(void)
+ 	overo_smsc911x2_resources[1].start = OMAP_GPIO_IRQ(OVERO_SMSC911X2_GPIO);
+ 	overo_smsc911x2_resources[1].end   = 0;
+ 
++#endif
+ 	platform_add_devices(smsc911x_devices, ARRAY_SIZE(smsc911x_devices));
+ }
+ 
+@@ -353,6 +361,16 @@ static struct regulator_consumer_supply overo_vdda_dac_supply =
+ static struct regulator_consumer_supply overo_vdds_dsi_supply =
+ 	REGULATOR_SUPPLY("vdds_dsi", "omapdss");
+ 
++static struct spi_board_info overo_mcspi_board_info[] = {
++	{
++		.modalias	= "spidev",
++		.max_speed_hz	= 12000000, // 12 MHz
++		.bus_num	= 1,
++		.chip_select	= 0,
++		.mode		= SPI_MODE_1,
++	},
++};
++
+ static struct mtd_partition overo_nand_partitions[] = {
+ 	{
+ 		.name           = "xloader",
+@@ -432,8 +450,8 @@ static struct omap2_hsmmc_info mmc[] = {
+ 		.mmc		= 2,
+ 		.caps		= MMC_CAP_4_BIT_DATA,
+ 		.gpio_cd	= -EINVAL,
+-		.gpio_wp	= -EINVAL,
+-		.transceiver	= true,
++		.transceiver    = true,
++		.gpio_wp	= 150,
+ 		.ocr_mask	= 0x00100000,	/* 3.3V */
+ 	},
+ 	{}	/* Terminator */
+@@ -612,6 +630,8 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+ static struct omap_board_mux board_mux[] __initdata = {
+ 	{ .reg_offset = OMAP_MUX_TERMINATOR },
+ };
++#else
++#define board_mux	NULL
+ #endif
+ 
+ static struct omap_musb_board_data musb_board_data = {
+@@ -626,6 +646,148 @@ static struct omap_musb_board_data musb_board_data = {
+ 	.power			= 100,
+ };
+ 
++static void __init usrp1_e_init(void)
++{
++	unsigned int tmp;
++
++	printk("Setup up gpmc timing.\n");
++
++// Set up CS4, data read/write
++
++#if 1
++	// Signal control parameters per chip select
++	tmp = gpmc_cs_read_reg(4, GPMC_CS_CONFIG1);
++//	tmp |= (GPMC_CONFIG1_MUXADDDATA);
++//	tmp |= (GPMC_CONFIG1_WRITETYPE_SYNC);
++//	tmp |= (GPMC_CONFIG1_READTYPE_SYNC);
++	tmp |= (GPMC_CONFIG1_FCLK_DIV(0));
++	gpmc_cs_write_reg(4, GPMC_CS_CONFIG1, tmp);
++	printk("GPMC_CONFIG1 reg: %x\n", tmp);
++#endif
++
++#if 1 
++	// CS signal timing parameter configuration
++	tmp = 0;
++	tmp |= GPMC_CONFIG2_CSONTIME(1);         /*  1 */
++	tmp |= GPMC_CONFIG2_CSWROFFTIME(16);     /* 16 */
++	tmp |= GPMC_CONFIG2_CSRDOFFTIME(16);     /* 16 */
++	printk("GPMC_CONFIG2 reg: %x\n", tmp);
++	gpmc_cs_write_reg(4, GPMC_CS_CONFIG2, tmp);
++#endif 
++
++#if 0
++	// nADV signal timing parameter configuration
++        tmp = 0;
++        tmp |= GPMC_CONFIG3_ADVONTIME(1);
++        tmp |= GPMC_CONFIG3_ADVRDOFFTIME(2);
++        tmp |= GPMC_CONFIG3_ADVWROFFTIME(2);
++        printk("GPMC_CONFIG3 reg: %x\n", tmp);
++        gpmc_cs_write_reg(4, GPMC_CS_CONFIG3, tmp);
++#endif
++
++#if 1
++	// nWE and nOE signals timing parameter configuration
++	tmp = 0;
++	tmp |= GPMC_CONFIG4_WEONTIME(3);      /*  3 */
++	tmp |= GPMC_CONFIG4_WEOFFTIME(16);     /* 16 */
++	tmp |= GPMC_CONFIG4_OEONTIME(3);      /*  3 */
++	tmp |= GPMC_CONFIG4_OEOFFTIME(16);     /* 16 */
++	printk("GPMC_CONFIG4 reg: %x\n", tmp);
++	gpmc_cs_write_reg(4, GPMC_CS_CONFIG4, tmp);
++#endif
++
++#if 1
++	// RdAccess time and Cycle time timing parameters configuration
++	tmp = 0;
++	tmp |= GPMC_CONFIG5_PAGEBURSTACCESSTIME(1);
++	tmp |= GPMC_CONFIG5_RDACCESSTIME(15);           /* 15 */
++	tmp |= GPMC_CONFIG5_WRCYCLETIME(17);           /* 17 */
++	tmp |= GPMC_CONFIG5_RDCYCLETIME(17);           /* 17 */
++	printk("GPMC_CONFIG5 reg: %x\n", tmp);
++
++	gpmc_cs_write_reg(4, GPMC_CS_CONFIG5, tmp);
++#endif
++
++#if 1
++	// WrAccessTime WrDataOnADmuxBus, Cycle2Cycle, and BusTurnAround params
++	tmp = (1<<31);
++	tmp |= GPMC_CONFIG6_WRACCESSTIME(15);          /* 15 */
++	tmp |= GPMC_CONFIG6_WRDATAONADMUXBUS(3);
++	tmp |= GPMC_CONFIG6_CYCLE2CYCLEDELAY(0);
++	tmp |= GPMC_CONFIG6_BUSTURNAROUND(0);
++	printk("GPMC_CONFIG6 reg: %x\n", tmp);
++	gpmc_cs_write_reg(4, GPMC_CS_CONFIG6, tmp);
++#endif
++
++// Configure timing for CS6, wishbone access
++
++#if 1
++	// Signal control parameters per chip select
++	tmp = gpmc_cs_read_reg(6, GPMC_CS_CONFIG1);
++//	tmp |= (GPMC_CONFIG1_MUXADDDATA);
++	tmp |= (GPMC_CONFIG1_WRITETYPE_SYNC);
++	tmp |= (GPMC_CONFIG1_READTYPE_SYNC);
++	tmp |= (GPMC_CONFIG1_FCLK_DIV(0));
++	gpmc_cs_write_reg(6, GPMC_CS_CONFIG1, tmp);
++	printk("GPMC_CONFIG1 reg: %x\n", tmp);
++#endif
++
++#if 1 
++	// CS signal timing parameter configuration
++	tmp = 0;
++	tmp |= GPMC_CONFIG2_CSONTIME(1);
++	tmp |= GPMC_CONFIG2_CSWROFFTIME(17);
++	tmp |= GPMC_CONFIG2_CSRDOFFTIME(17);
++	printk("GPMC_CONFIG2 reg: %x\n", tmp);
++	gpmc_cs_write_reg(6, GPMC_CS_CONFIG2, tmp);
++#endif 
++
++#if 0
++	// nADV signal timing parameter configuration
++        tmp = 0;
++        tmp |= GPMC_CONFIG3_ADVONTIME(1);
++        tmp |= GPMC_CONFIG3_ADVRDOFFTIME(2);
++        tmp |= GPMC_CONFIG3_ADVWROFFTIME(2);
++        printk("GPMC_CONFIG3 reg: %x\n", tmp);
++        gpmc_cs_write_reg(6, GPMC_CS_CONFIG3, tmp);
++#endif
++
++#if 0
++	// nWE and nOE signals timing parameter configuration
++	tmp = 0;
++	tmp |= GPMC_CONFIG4_WEONTIME(3);
++	tmp |= GPMC_CONFIG4_WEOFFTIME(4);
++	tmp |= GPMC_CONFIG4_OEONTIME(3);
++	tmp |= GPMC_CONFIG4_OEOFFTIME(4);
++	printk("GPMC_CONFIG4 reg: %x\n", tmp);
++	gpmc_cs_write_reg(6, GPMC_CS_CONFIG4, tmp);
++#endif
++
++#if 0
++	// RdAccess time and Cycle time timing paraters configuration
++	tmp = 0;
++	tmp |= GPMC_CONFIG5_PAGEBURSTACCESSTIME(1);
++	tmp |= GPMC_CONFIG5_RDACCESSTIME(4);
++	tmp |= GPMC_CONFIG5_WRCYCLETIME(5);
++	tmp |= GPMC_CONFIG5_RDCYCLETIME(5);
++	printk("GPMC_CONFIG5 reg: %x\n", tmp);
++	gpmc_cs_write_reg(6, GPMC_CS_CONFIG5, tmp);
++#endif
++
++#if 1
++	// WrAccessTime WrDataOnADmuxBus, Cycle2Cycle, and BusTurnAround params
++	tmp = 0;
++	tmp |= GPMC_CONFIG6_WRACCESSTIME(15);
++	tmp |= GPMC_CONFIG6_WRDATAONADMUXBUS(3);
++	tmp |= GPMC_CONFIG6_CYCLE2CYCLEDELAY(3);
++	tmp |= GPMC_CONFIG6_CYCLE2CYCLESAMECSEN;
++	tmp |= GPMC_CONFIG6_BUSTURNAROUND(0);
++	printk("GPMC_CONFIG6 reg: %x\n", tmp);
++	gpmc_cs_write_reg(6, GPMC_CS_CONFIG6, tmp);
++#endif
++
++}
++
+ static void __init overo_init(void)
+ {
+ 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+@@ -637,8 +799,14 @@ static void __init overo_init(void)
+ 	usb_ehci_init(&ehci_pdata);
+ 	overo_spi_init();
+ 	overo_init_smsc911x();
++#if 0
+ 	overo_display_init();
+-
++#endif
++	usrp1_e_init();
++#if 1
++	spi_register_board_info(overo_mcspi_board_info,
++		ARRAY_SIZE(overo_mcspi_board_info));
++#endif
+ 	/* Ensure SDRC pins are mux'd for self-refresh */
+ 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+ 	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
+@@ -680,7 +848,7 @@ static void __init overo_init(void)
+ 					"OVERO_GPIO_USBH_CPEN\n");
+ }
+ 
+-MACHINE_START(OVERO, "Gumstsix Overo")
++MACHINE_START(OVERO, "Gumstix Overo")
+ 	.boot_params	= 0x80000100,
+ 	.map_io		= omap3_map_io,
+ 	.reserve	= omap_reserve,
+diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
+index 4d073f1..8bd6dfb 100644
+--- a/drivers/misc/Kconfig
++++ b/drivers/misc/Kconfig
+@@ -452,6 +452,15 @@ config PCH_PHUB
+ 	  To compile this driver as a module, choose M here: the module will
+ 	  be called pch_phub.
+ 
++config USRP_E
++	tristate "USRP-E FPGA interface driver"
++	default n
++	help
++	 This driver is for the Ettus Research USRP Embedded Software
++	 Defined Radio platform.
++
++	 If you do not plan to run this kernel on that hardware choose N.
++
+ source "drivers/misc/c2port/Kconfig"
+ source "drivers/misc/eeprom/Kconfig"
+ source "drivers/misc/cb710/Kconfig"
+diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
+index 98009cc..f43483e 100644
+--- a/drivers/misc/Makefile
++++ b/drivers/misc/Makefile
+@@ -35,6 +35,7 @@ obj-$(CONFIG_TI_DAC7512)	+= ti_dac7512.o
+ obj-$(CONFIG_C2PORT)		+= c2port/
+ obj-$(CONFIG_IWMC3200TOP)      += iwmc3200top/
+ obj-$(CONFIG_HMC6352)		+= hmc6352.o
++obj-$(CONFIG_USRP_E)		+= usrp_e.o
+ obj-y				+= eeprom/
+ obj-y				+= cb710/
+ obj-$(CONFIG_VMWARE_BALLOON)	+= vmw_balloon.o
+diff --git a/drivers/misc/usrp_e.c b/drivers/misc/usrp_e.c
+new file mode 100644
+index 0000000..2923b14
+--- /dev/null
++++ b/drivers/misc/usrp_e.c
+@@ -0,0 +1,1481 @@
++/*
++ * -*- linux-c -*-
++ * Interface for USRP Embedded from Ettus Research, LLC.
++ * This driver uses the GPMC interface on the OMAP3 to pass data
++ * to/from a Spartan 3 FPGA.
++ *
++ * Copyright (C) Ettus Research, LLC
++ *
++ * Written by Philip Balister <philip@opensdr.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include "linux/fs.h"
++#include "linux/module.h"
++#include "linux/cdev.h"
++#include "linux/device.h"
++#include "linux/spinlock.h"
++#include "linux/errno.h"
++#include "linux/irq.h"
++#include "linux/interrupt.h"
++#include "linux/wait.h"
++#include "linux/sched.h"
++#include "linux/dma-mapping.h"
++#include "linux/semaphore.h"
++#include "linux/kthread.h"
++#include "linux/poll.h"
++#include "linux/slab.h"
++
++#include "plat/gpmc.h"
++#include "plat/gpio.h"
++#include "plat/dma.h"
++
++#include "asm/uaccess.h"
++#include "asm/io.h"
++#include "asm/atomic.h"
++
++#include "linux/usrp_e.h"
++
++#define TX_SPACE_AVAILABLE_GPIO	144
++#define RX_DATA_READY_GPIO	146
++
++static atomic_t use_count = ATOMIC_INIT(0);
++static atomic_t mapped = ATOMIC_INIT(0);
++static int shutting_down;
++
++struct spi_regs_wb;
++struct i2c_regs_wb;
++
++struct usrp_e_dev {
++	struct cdev cdev;
++	unsigned long mem_base;
++	unsigned long control_mem_base;
++	u32 *ioaddr;
++	u8 *ctl_addr;
++	struct spi_regs_wb *ctl_spi;
++	struct i2c_regs_wb *ctl_i2c;
++	spinlock_t fpga_lock;
++
++	atomic_t n_overruns;
++	atomic_t n_underruns;
++
++} *usrp_e_devp;
++
++struct dma_data {
++	int ch;
++	struct omap_dma_channel_params params;
++
++	unsigned long virt_from;
++	unsigned long virt_to;
++	unsigned long phys_from;
++	unsigned long phys_to;
++};
++
++#define MISC_REGS_BASE 0x0
++
++#define UE_REG_MISC_LED (MISC_REGS_BASE + 0)
++
++#define UE_REG_MISC_RX_LEN (MISC_REGS_BASE + 10)
++#define UE_REG_MISC_TX_LEN (MISC_REGS_BASE + 12)
++
++#define UE_REG_SLAVE(n) ((n)<<7)
++#define UE_REG_SR_ADDR(n) ((UE_REG_SLAVE(5)) + (4*(n)))
++
++#define UE_REG_CTRL_TX_CLEAR_UNDERRUN UE_REG_SR_ADDR(25)
++#define UE_SR_CLEAR_FIFO UE_REG_SR_ADDR(6)
++
++#define CTL_SPI_BASE 0x100
++
++struct spi_regs_wb {
++	u32 txrx0;
++	u32 txrx1;
++	u32 txrx2;
++	u32 txrx3;
++	u32 ctrl;
++	u32 div;
++	u32 ss;
++};
++
++/* Defines for spi ctrl register */
++#define UE_SPI_CTRL_ASS		(BIT(13))
++#define UE_SPI_CTRL_IE		(BIT(12))
++#define UE_SPI_CTRL_LSB		(BIT(11))
++/* defines for TXNEG and RXNEG in usrp_e.h so user can pass them to driver. */
++#define UE_SPI_CTRL_GO_BSY	(BIT(8))
++#define UE_SPI_CTRL_CHAR_LEN_MASK	0x7f
++
++
++#define CTL_I2C_BASE 0x180
++#if 1
++struct i2c_regs_wb {
++	u8 prescalar_lo;
++	u8 dummy;
++	u8 dummy1;
++	u8 dummy2;
++	u8 prescalar_hi;
++	u8 dummy3;
++	u8 dummy4;
++	u8 dummy5;
++	u8 ctrl;
++	u8 dummy6;
++	u8 dummy7;
++	u8 dummy8;
++	u8 data;
++	u8 dummy9;
++	u8 dummy10;
++	u8 dummy11;
++	u8 cmd_status;
++};
++#else
++struct i2c_regs_wb {
++	u16 prescalar_lo;
++	u16 dummy2;
++	u16 prescalar_hi;
++	u16 dummy3;
++	u16 ctrl;
++	u16 dummy6;
++	u16 data;
++	u16 dummy9;
++	u16 cmd_status;
++};
++#endif
++
++#define I2C_CTRL_EN	(BIT(7))		/* core enable */
++#define I2C_CTRL_IE	(BIT(6))		/* interrupt enable */
++
++/* STA, STO, RD, WR, and IACK bits are cleared automatically */
++
++#define I2C_CMD_START	(BIT(7))
++#define I2C_CMD_STOP	(BIT(6))
++#define I2C_CMD_RD	(BIT(5))
++#define I2C_CMD_WR	(BIT(4))
++#define I2C_CMD_NACK	(BIT(3))
++#define I2C_CMD_RSVD_2	(BIT(2))
++#define I2C_CMD_RSVD_1	(BIT(1))
++#define I2C_CMD_IACK	(BIT(0))
++
++#define I2C_ST_RXACK	(BIT(7))
++#define I2C_ST_BUSY	(BIT(6))
++#define I2C_ST_AL	(BIT(5))
++#define I2C_RSVD_4	(BIT(4))
++#define I2C_RSVD_3	(BIT(3))
++#define I2C_RSVD_2	(BIT(2))
++#define I2C_ST_TIP	(BIT(1))
++#define I2C_ST_IP	(BIT(0))
++
++#define MAX_WB_DIV 4
++#define MASTER_CLK_RATE 64000000
++#define PRESCALAR(wb_div) (((MASTER_CLK_RATE/(wb_div)) / (5 * 100000)) - 1)
++
++static __u16 prescalar_values[MAX_WB_DIV+1] = {
++	0xffff,
++	PRESCALAR(1),
++	PRESCALAR(2),
++	PRESCALAR(3),
++	PRESCALAR(4),
++};
++
++static struct dma_data *rx_dma;
++static struct dma_data *tx_dma;
++
++struct ring_buffer_entry {
++	unsigned long dma_addr;
++	__u8 *frame_addr;
++};
++
++struct ring_buffer {
++	struct ring_buffer_info (*rbi)[];
++	struct ring_buffer_entry (*rbe)[];
++	int num_pages;
++	unsigned long (*pages)[];
++};
++
++static struct ring_buffer tx_rb;
++static struct ring_buffer rx_rb;
++
++static struct usrp_e_ring_buffer_size_t rb_size;
++
++#define NUM_PAGES_RX_FLAGS 1
++#define NUM_RX_FRAMES 100
++#define NUM_PAGES_TX_FLAGS 1
++#define NUM_TX_FRAMES 100
++
++static int tx_rb_write;
++static int tx_rb_read;
++static int rx_rb_write;
++static int rx_rb_read;
++
++static int alloc_ring_buffer(struct ring_buffer *rb,
++			unsigned int num_bufs, enum dma_data_direction direction);
++static void delete_ring_buffer(struct ring_buffer *rb,
++			unsigned int num_bufs, enum dma_data_direction direction);
++static int alloc_ring_buffers(void);
++static void init_ring_buffer(struct ring_buffer *rb, int num_bufs,
++			int init_flags, enum dma_data_direction direction);
++
++static dev_t usrp_e_dev_number;
++static struct class *usrp_e_class;
++
++#define DEVICE_NAME	"usrp_e"
++
++static const struct file_operations usrp_e_fops;
++
++static irqreturn_t space_available_irqhandler(int irq, void *dev_id);
++static irqreturn_t data_ready_irqhandler(int irq, void *dev_id);
++static void usrp_rx_dma_irq(int ch, u16 stat, void *data);
++static void usrp_tx_dma_irq(int ch, u16 stat, void *data);
++
++static DECLARE_WAIT_QUEUE_HEAD(data_received_queue);
++static DECLARE_WAIT_QUEUE_HEAD(space_available_queue);
++static DECLARE_WAIT_QUEUE_HEAD(received_data_from_user);
++static DECLARE_WAIT_QUEUE_HEAD(tx_rb_space_available);
++
++static int tx_dma_waiting_for_data;
++static int waiting_for_space_in_tx_rb;
++
++#define DEBUG_RX 1
++
++static DEFINE_SEMAPHORE(dma_lock);
++
++static void usrp_e_spi_init(void);
++static void usrp_e_i2c_init(void);
++
++static int init_dma_controller(void);
++static void release_dma_controller(void);
++static int get_frame_from_fpga_start(void);
++static int get_frame_from_fpga_finish(void);
++static int send_frame_to_fpga_start(void);
++static int send_frame_to_fpga_finish(void);
++
++static int rx_dma_active;
++static int tx_dma_active;
++
++static int  __init
++usrp_e_init(void)
++{
++	int ret;
++	struct usrp_e_dev *p;
++
++	printk(KERN_DEBUG "usrp_e entering driver initialization\n");
++
++	if (alloc_chrdev_region(&usrp_e_dev_number, 0, 1, DEVICE_NAME) < 0) {
++		printk(KERN_DEBUG "Can't register device\n");
++		return -1;
++	}
++
++	usrp_e_class = class_create(THIS_MODULE, DEVICE_NAME);
++
++	usrp_e_devp = kzalloc(sizeof(struct usrp_e_dev), GFP_KERNEL);
++	if (!usrp_e_devp) {
++		printk(KERN_ERR "Bad kmalloc\n");
++		return -ENOMEM;
++	}
++
++	p = usrp_e_devp; /* Shorten var name so I stay sane. */
++
++	printk(KERN_DEBUG "usrp_e data struct malloc'd.\n");
++
++	atomic_set(&p->n_underruns, 0);
++	atomic_set(&p->n_overruns, 0);
++
++	printk(KERN_DEBUG "usrp_e Data initialized..\n");
++
++	cdev_init(&p->cdev, &usrp_e_fops);
++	p->cdev.owner = THIS_MODULE;
++
++	ret = cdev_add(&p->cdev, MKDEV(MAJOR(usrp_e_dev_number), 0), 1);
++	if (ret) {
++		printk(KERN_ERR "Bad cdev\n");
++		return ret;
++	}
++
++	printk(KERN_DEBUG "usrp_e major number : %d\n",
++		MAJOR(usrp_e_dev_number));
++	device_create(usrp_e_class, NULL, MKDEV(MAJOR(usrp_e_dev_number), 0),
++		      NULL, "usrp_e%d", 0);
++
++	printk(KERN_DEBUG "Getting Chip Select\n");
++
++	if (gpmc_cs_request(4, SZ_2K, &p->mem_base) < 0) {
++		printk(KERN_ERR "Failed request for GPMC mem for usrp_e\n");
++		return -1;
++	}
++	printk(KERN_DEBUG "Got CS4, address = %lx\n", p->mem_base);
++
++	if (!request_mem_region(p->mem_base, SZ_2K, "usrp_e")) {
++		printk(KERN_ERR "Request_mem_region failed.\n");
++		gpmc_cs_free(4);
++		return -1;
++	}
++
++	p->ioaddr = ioremap(p->mem_base, SZ_2K);
++	spin_lock_init(&p->fpga_lock);
++
++	if (gpmc_cs_request(6, SZ_2K, &p->control_mem_base) < 0) {
++		printk(KERN_ERR "Failed request for GPMC control mem for usrp_e\n");
++		return -1;
++	}
++	printk(KERN_DEBUG "Got CS6, address = %lx\n", p->control_mem_base);
++
++	if (!request_mem_region(p->control_mem_base, SZ_2K, "usrp_e_c")) {
++		printk(KERN_ERR "Request_mem_region failed.\n");
++		gpmc_cs_free(6);
++		return -1;
++	}
++
++	p->ctl_addr = ioremap_nocache(p->control_mem_base, SZ_2K);
++
++	/* Initialize wishbone SPI and I2C interfaces */
++
++	usrp_e_spi_init();
++	usrp_e_i2c_init();
++
++	/* Configure GPIO's */
++
++	if (!(((gpio_request(TX_SPACE_AVAILABLE_GPIO,
++				    "TX_SPACE_AVAILABLE_GPIO") == 0) &&
++		(gpio_direction_input(TX_SPACE_AVAILABLE_GPIO) == 0)))) {
++		printk(KERN_ERR "Could not claim GPIO for TX_SPACE_AVAILABLE_GPIO\n");
++		return -1;
++	}
++
++	if (!(((gpio_request(RX_DATA_READY_GPIO, "RX_DATA_READY_GPIO") == 0) &&
++		(gpio_direction_input(RX_DATA_READY_GPIO) == 0)))) {
++		printk(KERN_ERR "Could not claim GPIO for RX_DATA_READY_GPIO\n");
++		return -1;
++	}
++
++	/* Debug gpios */
++	if (!(((gpio_request(14, "Debug0") == 0) &&
++				(gpio_direction_output(14, 0) == 0)))) {
++		printk(KERN_ERR "Could not claim GPIO for Debug0\n");
++		return -1;
++	}
++
++	if (!(((gpio_request(21, "Debug1") == 0) &&
++				(gpio_direction_output(21, 0) == 0)))) {
++		printk(KERN_ERR "Could not claim GPIO for Debug1\n");
++		return -1;
++	}
++
++	if (!(((gpio_request(22, "Debug2") == 0) &&
++				(gpio_direction_output(22, 0) == 0)))) {
++		printk(KERN_ERR "Could not claim GPIO for Debug2\n");
++		return -1;
++	}
++
++	if (!(((gpio_request(23, "Debug3") == 0) &&
++				(gpio_direction_output(23, 0) == 0)))) {
++		printk(KERN_ERR "Could not claim GPIO for Debug3\n");
++		return -1;
++	}
++
++
++	rb_size.num_pages_rx_flags = NUM_PAGES_RX_FLAGS;
++	rb_size.num_rx_frames = NUM_RX_FRAMES;
++	rb_size.num_pages_tx_flags = NUM_PAGES_TX_FLAGS;
++	rb_size.num_tx_frames = NUM_TX_FRAMES;
++
++	ret = alloc_ring_buffers();
++	if (ret < 0)
++		return ret;
++
++	/* Initialize various DMA related flags */
++	rx_dma_active = 0;
++	tx_dma_active = 0;
++	shutting_down = 0;
++
++	printk(KERN_DEBUG "usrp_e Driver Initialized.\n");
++
++	return 0;
++}
++
++static void __exit
++usrp_e_cleanup(void)
++{
++	struct usrp_e_dev *p = usrp_e_devp;
++
++	unregister_chrdev_region(usrp_e_dev_number, 1);
++
++	release_mem_region(p->mem_base, SZ_2K);
++	release_mem_region(p->control_mem_base, SZ_2K);
++
++	device_destroy(usrp_e_class, MKDEV(MAJOR(usrp_e_dev_number), 0));
++	cdev_del(&p->cdev);
++
++	class_destroy(usrp_e_class);
++
++	iounmap(p->ioaddr);
++	iounmap(p->ctl_addr);
++
++	gpmc_cs_free(4);
++	gpmc_cs_free(6);
++
++	printk(KERN_DEBUG "Freeing gpios\n");
++
++	gpio_free(TX_SPACE_AVAILABLE_GPIO);
++	gpio_free(RX_DATA_READY_GPIO);
++
++	/* debug */
++	gpio_free(14);
++	gpio_free(21);
++	gpio_free(22);
++	gpio_free(23);
++
++	delete_ring_buffer(&tx_rb, rb_size.num_tx_frames, DMA_TO_DEVICE);
++	delete_ring_buffer(&rx_rb, rb_size.num_rx_frames, DMA_FROM_DEVICE);
++
++	kfree(p);
++
++	printk(KERN_DEBUG "Leaving cleanup\n");
++}
++
++static int
++usrp_e_open(struct inode *inode, struct file *file)
++{
++	struct usrp_e_dev *p = usrp_e_devp;
++	int ret;
++
++	printk(KERN_DEBUG "usrp_e open called, use_count = %d\n",
++		atomic_read(&use_count));
++	if (atomic_add_return(1, &use_count) != 1) {
++		printk(KERN_ERR "use_count = %d\n", atomic_read(&use_count));
++		atomic_dec(&use_count);
++		return -EBUSY;
++	}
++
++	/* Clear rx and tx fifos in the fpga */
++	writel(1, p->ctl_addr + UE_SR_CLEAR_FIFO);
++	writel(2, p->ctl_addr + UE_SR_CLEAR_FIFO);
++
++#if 0
++	usrp_e_devp = container_of(inode->i_cdev, struct usrp_e_dev, cdev);
++
++	file->private_data = usrp_e_devp;
++#endif
++
++	ret = init_dma_controller();
++	if (ret < 0)
++		return ret;
++
++	tx_rb_write = 0;
++	tx_rb_read = 0;
++
++	rx_rb_write = 0;
++	rx_rb_read = 0;
++
++	tx_dma_active = 0;
++	rx_dma_active = 0;
++	shutting_down = 0;
++
++	init_ring_buffer(&rx_rb, rb_size.num_rx_frames, RB_KERNEL, DMA_FROM_DEVICE);
++	init_ring_buffer(&tx_rb, rb_size.num_tx_frames, RB_KERNEL, DMA_TO_DEVICE);
++
++	/* Configure interrupts for GPIO pins */
++
++	ret = request_irq(gpio_to_irq(TX_SPACE_AVAILABLE_GPIO),
++			space_available_irqhandler,
++		IRQF_TRIGGER_RISING, "usrp_e_space_available", NULL);
++
++	ret = request_irq(gpio_to_irq(RX_DATA_READY_GPIO),
++			data_ready_irqhandler,
++			IRQF_TRIGGER_RISING, "usrp_e_data_ready", NULL);
++
++	printk(KERN_DEBUG "usrp: leaving open\n");
++	return 0;
++}
++
++static int
++usrp_e_release(struct inode *inode, struct file *file)
++{
++	struct usrp_e_dev *usrp_e_devp = file->private_data;
++
++	printk(KERN_DEBUG "usrp_e release called\n");
++
++	if (atomic_read(&use_count) != 1) {
++		printk(KERN_ERR "Attempt to close usrp_e driver that is not open");
++		return -ENOENT;
++	}
++
++	printk(KERN_DEBUG "Waiting for DMA to become inactive\n");
++	shutting_down = 0;
++	while (tx_dma_active || rx_dma_active)
++		cpu_relax();
++
++	/* Freeing gpio irq's */
++	printk(KERN_DEBUG "Freeing gpio irq's\n");
++
++	free_irq(gpio_to_irq(TX_SPACE_AVAILABLE_GPIO), NULL);
++	free_irq(gpio_to_irq(RX_DATA_READY_GPIO), NULL);
++
++	printk(KERN_DEBUG "Freeing DMA channels\n");
++
++	release_dma_controller();
++
++	usrp_e_devp = 0;
++
++	atomic_dec(&use_count);
++
++	return 0;
++}
++
++static ssize_t
++usrp_e_read(struct file *file, char *buf, size_t count, loff_t *ppos)
++{
++	size_t ret;
++	int rx_pkt_len;
++
++	if (count > SZ_2K)
++		return -EMSGSIZE;
++
++	if (!((*rx_rb.rbi)[rx_rb_read].flags & RB_USER)) {
++		if (wait_event_interruptible(data_received_queue,
++			      (((*rx_rb.rbi)[rx_rb_read].flags & RB_USER))))
++			return -EINTR;
++	}
++
++	rx_pkt_len = (*rx_rb.rbi)[rx_rb_read].len;
++	ret = copy_to_user(buf, (*rx_rb.rbe)[rx_rb_read].frame_addr, rx_pkt_len);
++
++	(*rx_rb.rbi)[rx_rb_read].flags = RB_KERNEL;
++
++	rx_rb_read++;
++	if (rx_rb_read == rb_size.num_rx_frames)
++		rx_rb_read = 0;
++
++	get_frame_from_fpga_start();
++
++	return ((ret == 0) ?  rx_pkt_len : -ret);
++}
++
++static ssize_t
++usrp_e_write(struct file *file, const char *buf, size_t count, loff_t *ppos)
++{
++	size_t ret;
++
++#if 0
++//	printk("In write.\n");
++
++	/* Trigger a DMA transfer. Used to start transmit after writing */
++	/* data into the transmit ring buffer from user space */
++	if (count < 0) {
++		send_frame_to_fpga_start();
++		return 0;
++	}
++
++	if (count > SZ_2K)
++		return -EMSGSIZE;
++
++//	printk("Write flags: %d\n", (*tx_rb.rbe)[tx_rb_write].flags);
++	if (!((*tx_rb.rbi)[tx_rb_write].flags & RB_KERNEL)) {
++		waiting_for_space_in_tx_rb = 1;
++//		printk("Sleeping\n");
++		if (wait_event_interruptible(tx_rb_space_available,
++			       ((*tx_rb.rbi)[tx_rb_write].flags & RB_KERNEL)))
++			return -EINTR;
++//		printk("Waking\n");
++	}
++
++	ret = copy_from_user((*tx_rb.rbe)[tx_rb_write].frame_addr, buf, count);
++	if (ret)
++		return -ret;
++
++	(*tx_rb.rbi)[tx_rb_write].len = count;
++	(*tx_rb.rbi)[tx_rb_write].flags = RB_USER;
++
++	tx_rb_write++;
++	if (tx_rb_write == rb_size.num_tx_frames)
++		tx_rb_write = 0;
++
++//	printk("Calling send_to_fpga_start from write\n");
++#endif
++	send_frame_to_fpga_start();
++
++	return count;
++}
++
++static loff_t
++usrp_e_llseek(struct file *file, loff_t offest, int orig)
++{
++	printk(KERN_DEBUG "usrp_e llseek called\n");
++
++	return 0;
++}
++
++static int usrp_e_ctl16(unsigned long arg, int direction)
++{
++	struct usrp_e_ctl16 __user *argp = (struct usrp_e_ctl16 __user *) arg;
++	int i;
++	struct usrp_e_ctl16 ctl;
++
++	if (copy_from_user(&ctl, argp, sizeof(struct usrp_e_ctl16)))
++		return -EFAULT;
++
++	if (ctl.count > 10)
++		return -EINVAL;
++
++	if (direction == 0) {
++		for (i = 0; i < ctl.count; i++)
++			writew(ctl.buf[i], &usrp_e_devp->ctl_addr \
++				[i + ctl.offset]);
++	} else if (direction == 1) {
++		for (i = 0; i < ctl.count; i++)
++			ctl.buf[i] = readw(&usrp_e_devp->ctl_addr \
++				[i + ctl.offset]);
++
++		if (copy_to_user(argp, &ctl, sizeof(struct usrp_e_ctl16)))
++			return -EFAULT;
++	} else
++		return -EFAULT;
++
++	return 0;
++}
++
++static int usrp_e_ctl32(unsigned long arg, int direction)
++{
++	struct usrp_e_ctl32 __user *argp = (struct usrp_e_ctl32 __user *) arg;
++	int i;
++	struct usrp_e_ctl32 ctl;
++
++	if (copy_from_user(&ctl, argp, sizeof(struct usrp_e_ctl32)))
++		return -EFAULT;
++
++	if (ctl.count > 20)
++		return -EINVAL;
++
++	if (direction == 0) {
++		for (i = 0; i < ctl.count; i++)
++			writel(ctl.buf[i], &usrp_e_devp->ctl_addr \
++				[i + ctl.offset]);
++	} else if (direction == 1) {
++		for (i = 0; i < ctl.count; i++)
++			ctl.buf[i] = readl(&usrp_e_devp->ctl_addr \
++				[i + ctl.offset]);
++
++		if (copy_to_user(argp, &ctl, sizeof(struct usrp_e_ctl16)))
++			return -EFAULT;
++
++	} else
++		return -EFAULT;
++
++	return 0;
++}
++
++static int usrp_e_get_rb_info(unsigned long arg)
++{
++	struct usrp_e_ring_buffer_size_t __user *argp = (struct usrp_e_ring_buffer_size_t __user *) arg;
++	int i;
++
++	if (copy_to_user(argp, &rb_size, sizeof(rb_size)))
++		return -EFAULT;
++
++	return 0;
++}
++
++static void usrp_e_spi_init()
++{
++	struct usrp_e_dev *p = usrp_e_devp;
++
++	p->ctl_spi = (struct spi_regs_wb *)(p->ctl_addr + CTL_SPI_BASE);
++	p->ctl_spi->div = 64; /* 1 = Div by 4 (12.5 MHz) */
++}
++
++static int usrp_e_spi_wait(void)
++{
++	struct usrp_e_dev *p = usrp_e_devp;
++
++	while (p->ctl_spi->ctrl & UE_SPI_CTRL_GO_BSY) {
++		if (signal_pending(current)) {
++			printk(KERN_DEBUG "Signal received.\n");
++			set_current_state(TASK_RUNNING);
++			return -EINTR;
++		}
++		schedule();
++	}
++
++	return 0;
++}
++
++static int usrp_e_spi(unsigned long __user arg)
++{
++	struct usrp_e_dev *p = usrp_e_devp;
++	struct usrp_e_spi __user *argp = (struct usrp_e_spi __user *) arg;
++	struct usrp_e_spi spi_cmd;
++	int ctrl, ret;
++
++	if (copy_from_user(&spi_cmd, argp, sizeof(struct usrp_e_spi)))
++		return -EFAULT;
++
++	spi_cmd.flags &= (UE_SPI_CTRL_TXNEG | UE_SPI_CTRL_RXNEG);
++	ctrl = UE_SPI_CTRL_ASS | (UE_SPI_CTRL_CHAR_LEN_MASK & spi_cmd.length) \
++		| spi_cmd.flags;
++
++	ret = usrp_e_spi_wait();
++	if (ret < 0)
++		return ret;
++
++	p->ctl_spi->ss = spi_cmd.slave & 0xff;
++
++	p->ctl_spi->txrx0 = spi_cmd.data;
++
++	p->ctl_spi->ctrl = ctrl;
++	p->ctl_spi->ctrl = ctrl | UE_SPI_CTRL_GO_BSY;
++
++	if (spi_cmd.readback) {
++		usrp_e_spi_wait();
++		if (copy_to_user(&argp->data, &p->ctl_spi->txrx0,
++					sizeof(__u32)))
++			return -EFAULT;
++		else
++			return 0;
++	} else
++		return 0;
++
++}
++
++static void usrp_e_i2c_init()
++{
++	struct usrp_e_dev *p = usrp_e_devp;
++	int wb_div;
++
++	p->ctl_i2c = (struct i2c_regs_wb *)(p->ctl_addr + CTL_I2C_BASE);
++
++	writeb(0, &p->ctl_i2c->ctrl);	/* disable core */
++
++	/* Assume wb_div is 4, deal with this later */
++	wb_div = 4;
++	if (wb_div > MAX_WB_DIV)
++		wb_div = MAX_WB_DIV;
++
++	writeb((prescalar_values[wb_div] & 0xff), &p->ctl_i2c->prescalar_lo);
++	writeb(((prescalar_values[wb_div] >> 8) & 0xff),
++		&p->ctl_i2c->prescalar_hi);
++	writeb(I2C_CTRL_EN, &p->ctl_i2c->ctrl);	/* enable core */
++}
++
++static int usrp_e_i2c_wait(__u32 mask, int chk_ack)
++{
++	struct usrp_e_dev *p = usrp_e_devp;
++
++	while (readb(&p->ctl_i2c->cmd_status) & mask) {
++		if (signal_pending(current)) {
++			printk(KERN_DEBUG "Signal received.\n");
++			set_current_state(TASK_RUNNING);
++			return -EINTR;
++		}
++		schedule();
++	}
++
++	if (chk_ack) {
++		if ((readb(&p->ctl_i2c->cmd_status) & I2C_ST_RXACK) == 0)
++			return 1;
++		else
++			return 0;
++	}
++
++	return 0;
++}
++
++static int usrp_e_i2c(unsigned long arg, int direction)
++{
++	struct usrp_e_dev *p = usrp_e_devp;
++	struct usrp_e_i2c __user *argp = (struct usrp_e_i2c __user *) arg;
++	struct usrp_e_i2c tmp;
++	struct usrp_e_i2c *i2c_msg;
++	int ret, len, i;
++
++	if (copy_from_user(&tmp, argp, sizeof(struct usrp_e_i2c)))
++		return -EFAULT;
++
++	i2c_msg = kmalloc(sizeof(struct usrp_e_i2c) + tmp.len, GFP_KERNEL);
++	if (!i2c_msg)
++		return -ENOMEM;
++
++	if (copy_from_user(i2c_msg, argp,
++				(sizeof(struct usrp_e_i2c) + tmp.len)))
++		return -EFAULT;
++
++	if (direction) {
++		/* read */
++		if (i2c_msg->len == 0)
++			return 1;
++
++		usrp_e_i2c_wait(I2C_ST_BUSY, 0);
++
++		writeb(((i2c_msg->addr << 1) | 1), &p->ctl_i2c->data);
++		writeb((I2C_CMD_WR | I2C_CMD_START), &p->ctl_i2c->cmd_status);
++		ret = usrp_e_i2c_wait(I2C_ST_TIP, 1);
++		if (ret < 0) {
++			return ret;
++		} else if (ret == 0) {
++			writeb(I2C_CMD_STOP, &p->ctl_i2c->cmd_status);
++			return 2;
++		}
++
++		for (len = i2c_msg->len, i = 0; len > 0; i++, len--) {
++			writeb((I2C_CMD_RD | ((len == 1) ?
++				(I2C_CMD_NACK | I2C_CMD_STOP) : 0)),
++				&p->ctl_i2c->cmd_status);
++			usrp_e_i2c_wait(I2C_ST_TIP, 0);
++			i2c_msg->data[i] = readb(&p->ctl_i2c->data);
++		}
++		if (copy_to_user(argp, i2c_msg, (sizeof(struct usrp_e_i2c) +
++				tmp.len)))
++			return -EFAULT;
++	} else {
++		/* write */
++		usrp_e_i2c_wait(I2C_ST_BUSY, 0);
++		writeb(((i2c_msg->addr << 1) | 0), &p->ctl_i2c->data);
++		writeb((I2C_CMD_WR | I2C_CMD_START |
++				(i2c_msg->len == 0 ? I2C_CMD_STOP : 0)),
++			        &p->ctl_i2c->cmd_status);
++		ret = usrp_e_i2c_wait(I2C_ST_TIP, 1);
++		if (ret < 0) {
++			return ret;
++		} else if (ret == 0) {
++			writeb(I2C_CMD_STOP, &p->ctl_i2c->cmd_status);
++			return 2;
++		}
++		for (len = i2c_msg->len, i = 0; len > 0; i++, len--) {
++			writeb(i2c_msg->data[i], &p->ctl_i2c->data);
++			writeb((I2C_CMD_WR | (len == 1 ? I2C_CMD_STOP : 0)),
++				&p->ctl_i2c->cmd_status);
++			ret = usrp_e_i2c_wait(I2C_ST_TIP, 1);
++			if (ret < 0) {
++				return ret;
++			} else if (ret == 0) {
++				writeb(I2C_CMD_STOP, &p->ctl_i2c->cmd_status);
++				return 2;
++			}
++		}
++
++	}
++
++
++	return 1;
++}
++
++static int usrp_e_ioctl(struct file *file,
++			unsigned int cmd, unsigned long arg)
++{
++
++	switch (cmd) {
++	case USRP_E_WRITE_CTL16:
++		return usrp_e_ctl16(arg, 0);
++
++	case USRP_E_READ_CTL16:
++		return usrp_e_ctl16(arg, 1);
++
++	case USRP_E_WRITE_CTL32:
++		return usrp_e_ctl32(arg, 0);
++
++	case USRP_E_READ_CTL32:
++		return usrp_e_ctl32(arg, 1);
++
++	case USRP_E_SPI:
++		return usrp_e_spi(arg);
++
++	case USRP_E_I2C_WRITE:
++		return usrp_e_i2c(arg, 0);
++
++	case USRP_E_I2C_READ:
++		return usrp_e_i2c(arg, 1);
++
++	case USRP_E_GET_RB_INFO:
++		return usrp_e_get_rb_info(arg);
++
++	default:
++		return -ENOTTY;
++	}
++
++	return 0;
++}
++
++static unsigned int usrp_e_poll(struct file *filp, poll_table *wait)
++{
++	unsigned int mask = 0;
++
++	poll_wait(filp, &data_received_queue, wait);
++	poll_wait(filp, &tx_rb_space_available, wait);
++
++	// Make sure write is active before sleeping
++	send_frame_to_fpga_start();
++
++	/* Make sure to read in case the rx ring buffer is full */
++	get_frame_from_fpga_start();
++
++	// This likely needs some locking. The pointer is incremented
++	// before the flag state is updated.
++
++	if (rx_rb_write == 0) {
++		if ((*rx_rb.rbi)[rb_size.num_rx_frames - 1].flags & RB_USER)
++			mask |= POLLIN | POLLRDNORM;
++	} else {
++		if ((*rx_rb.rbi)[rx_rb_write - 1].flags & RB_USER)
++			mask |= POLLIN | POLLRDNORM;
++	}
++
++	if (tx_rb_read == 0) {
++		if ((*tx_rb.rbi)[rb_size.num_tx_frames - 1].flags & RB_KERNEL)
++			mask |= POLLOUT | POLLWRNORM;
++	} else {
++		if ((*tx_rb.rbi)[tx_rb_read - 1].flags & RB_KERNEL)
++			mask |= POLLOUT | POLLWRNORM;
++	}
++
++	return mask;
++
++}
++
++/* The mmap code is based on code in af_packet.c */
++
++static void usrp_e_mm_open(struct vm_area_struct *vma)
++{
++
++	atomic_inc(&mapped);
++}
++
++static void usrp_e_mm_close(struct vm_area_struct *vma)
++{
++
++	atomic_dec(&mapped);
++}
++
++static const struct vm_operations_struct usrp_e_mmap_ops = {
++	.open   = usrp_e_mm_open,
++	.close  = usrp_e_mm_close,
++};
++
++static int usrp_e_mmap(struct file *filp, struct vm_area_struct *vma)
++{
++	unsigned long size, expected_size;
++	unsigned int i;
++	unsigned long start;
++	int err;
++	struct page *page;
++
++	printk("In mmap\n");
++
++	if (vma->vm_pgoff)
++		return -EINVAL;
++
++	/* Verify the user will map the entire tx and rx ring buffer space */
++	expected_size = (rb_size.num_rx_frames + rb_size.num_tx_frames) * (PAGE_SIZE >> 1)
++		+ (rb_size.num_pages_rx_flags + rb_size.num_pages_tx_flags) * PAGE_SIZE;
++
++	size = vma->vm_end - vma->vm_start;
++	printk(KERN_DEBUG "Size = %d, expected sixe = %d\n", size, expected_size);
++
++	if (size != expected_size)
++		return -EINVAL;
++
++	start = vma->vm_start;
++
++	page = virt_to_page(rx_rb.rbi);
++	err = vm_insert_page(vma, start, page);
++	if (err)
++		return -EINVAL;
++	
++	start += PAGE_SIZE;
++	
++	for (i = 0; i < rx_rb.num_pages; ++i) {
++		struct page *page = virt_to_page((*rx_rb.pages)[i]);
++		err = vm_insert_page(vma, start, page);
++		if (err)
++			return -EINVAL;
++
++		start += PAGE_SIZE;
++	}
++
++	page = virt_to_page(tx_rb.rbi);
++	err = vm_insert_page(vma, start, page);
++	if (err)
++		return -EINVAL;
++	
++	start += PAGE_SIZE;
++	
++	for (i = 0; i < tx_rb.num_pages; ++i) {
++		struct page *page = virt_to_page((*tx_rb.pages)[i]);
++
++		err = vm_insert_page(vma, start, page);
++		if (err)
++			return err;
++
++		start += PAGE_SIZE;
++	}
++
++	vma->vm_ops = &usrp_e_mmap_ops;
++
++	return 0;
++}
++
++static const struct file_operations usrp_e_fops = {
++	.owner		=	THIS_MODULE,
++	.open		=	usrp_e_open,
++	.release 	=	usrp_e_release,
++	.read		=	usrp_e_read,
++	.write		=	usrp_e_write,
++	.llseek		=	usrp_e_llseek,
++	.unlocked_ioctl		=	usrp_e_ioctl,
++	.poll           =       usrp_e_poll,
++	.mmap           =       usrp_e_mmap,
++};
++
++MODULE_VERSION("0.1");
++MODULE_ALIAS(DEVICE_NAME);
++MODULE_DESCRIPTION(DEVICE_NAME);
++MODULE_AUTHOR("Philip Balister <philip@opensdr.com>");
++MODULE_LICENSE("GPL v2");
++
++module_init(usrp_e_init);
++module_exit(usrp_e_cleanup);
++
++static irqreturn_t space_available_irqhandler(int irq, void *dev_id)
++{
++	int serviced = IRQ_NONE;
++
++#ifdef DEBUG_TX
++	gpio_set_value(22, 1);
++#endif
++
++//	printk("Calling send_to_fpga_start from space_available irq\n");
++	send_frame_to_fpga_start();
++
++	serviced = IRQ_HANDLED;
++
++#ifdef DEBUG_TX
++	gpio_set_value(22, 0);
++#endif
++
++	return serviced;
++}
++
++static void usrp_rx_dma_irq(int ch, u16 stat, void *data)
++{
++
++#ifdef DEBUG_RX
++	gpio_set_value(23, 1);
++#endif
++
++	rx_dma_active = 0;
++
++	get_frame_from_fpga_finish();
++
++#ifdef DEBUG_RX
++	gpio_set_value(23, 0);
++#endif
++}
++
++static void usrp_tx_dma_irq(int ch, u16 stat, void *data)
++{
++
++#ifdef DEBUG_TX
++	gpio_set_value(23, 1);
++#endif
++	tx_dma_active = 0;
++
++	send_frame_to_fpga_finish();
++
++#ifdef DEBUG_TX
++	gpio_set_value(23, 0);
++#endif
++
++/* Save
++	gpio_set_value(21, 1);
++	gpio_set_value(21, 0);
++*/
++
++}
++
++static irqreturn_t data_ready_irqhandler(int irq, void *dev_id)
++{
++	int serviced = IRQ_NONE;
++
++#ifdef DEBUG_RX
++	gpio_set_value(22, 1);
++#endif
++
++	get_frame_from_fpga_start();
++
++	serviced = IRQ_HANDLED;
++
++#ifdef DEBUG_RX
++	gpio_set_value(22, 0);
++#endif
++	return serviced;
++}
++
++static int init_dma_controller()
++{
++	struct usrp_e_dev *p = usrp_e_devp;
++
++	rx_dma = kzalloc(sizeof(struct dma_data), GFP_KERNEL);
++	if (!rx_dma) {
++		printk(KERN_ERR "Failed to allocate memory for rx_dma struct.");
++		return -ENOMEM;
++	}
++
++	if (omap_request_dma(OMAP_DMA_NO_DEVICE, "usrp-e-rx",
++			usrp_rx_dma_irq, (void *) rx_dma, &rx_dma->ch)) {
++		printk(KERN_ERR "Could not get rx DMA channel for usrp_e\n");
++		return -ENOMEM;
++	}
++	printk(KERN_DEBUG "rx_dma->ch %d\n", rx_dma->ch);
++
++	rx_dma->phys_from = p->mem_base;
++
++	memset(&rx_dma->params, 0, sizeof(rx_dma->params));
++	rx_dma->params.data_type	= OMAP_DMA_DATA_TYPE_S16;
++
++	rx_dma->params.src_amode	= OMAP_DMA_AMODE_CONSTANT;
++	rx_dma->params.dst_amode	= OMAP_DMA_AMODE_POST_INC;
++
++	rx_dma->params.src_start	= p->mem_base;
++	rx_dma->params.dst_start	= rx_dma->phys_to;
++
++	rx_dma->params.src_ei		= 1;
++	rx_dma->params.src_fi		= 1;
++	rx_dma->params.dst_ei		= 1;
++	rx_dma->params.dst_fi		= 1;
++
++	rx_dma->params.elem_count	= 1024;
++	rx_dma->params.frame_count	= 1;
++
++	rx_dma->params.read_prio        = DMA_CH_PRIO_HIGH;
++	rx_dma->params.write_prio       = DMA_CH_PRIO_LOW;
++
++	omap_set_dma_params(rx_dma->ch, &rx_dma->params);
++
++// Play with these with a real application
++//G	omap_set_dma_src_burst_mode(rx_dma->ch, OMAP_DMA_DATA_BURST_16);
++//	omap_set_dma_dest_burst_mode(rx_dma->ch, OMAP_DMA_DATA_BURST_16);
++
++#if 0 // Need to find implentations of the endian calls
++	omap_set_dma_src_endian_type(rx_dma->ch, OMAP_DMA_BIG_ENDIAN);
++	omap_set_dma_dst_endian_type(rx_dma->ch, OMAP_DMA_LITTLE_ENDIAN);
++#endif
++
++	tx_dma = kzalloc(sizeof(struct dma_data), GFP_KERNEL);
++	if (!tx_dma) {
++		printk(KERN_ERR "Failed to allocate memory for tx_dma struct.");
++		return -ENOMEM;
++	}
++
++	if (omap_request_dma(OMAP_DMA_NO_DEVICE, "usrp-e-tx",
++			usrp_tx_dma_irq, (void *) tx_dma, &tx_dma->ch)) {
++		printk(KERN_ERR "Could not get tx DMA channel for usrp_e\n");
++		return -ENOMEM;
++	}
++
++	printk(KERN_DEBUG "tx_dma->ch %d\n", tx_dma->ch);
++
++	tx_dma->phys_from = p->mem_base;
++
++	memset(&tx_dma->params, 0, sizeof(tx_dma->params));
++	tx_dma->params.data_type	= OMAP_DMA_DATA_TYPE_S16;
++
++	tx_dma->params.src_amode	= OMAP_DMA_AMODE_POST_INC;
++	tx_dma->params.dst_amode	= OMAP_DMA_AMODE_CONSTANT;
++
++	tx_dma->params.src_start	= tx_dma->phys_from;
++	tx_dma->params.dst_start	= p->mem_base;
++
++	tx_dma->params.src_ei		= 1;
++	tx_dma->params.src_fi		= 1;
++	tx_dma->params.dst_ei		= 1;
++	tx_dma->params.dst_fi		= 1;
++
++	tx_dma->params.elem_count	= 1024;
++	tx_dma->params.frame_count	= 1;
++
++	tx_dma->params.read_prio        = DMA_CH_PRIO_LOW;
++	tx_dma->params.write_prio       = DMA_CH_PRIO_HIGH;
++
++	omap_set_dma_params(tx_dma->ch, &tx_dma->params);
++
++// Play with these with a real application
++//G	omap_set_dma_src_burst_mode(tx_dma->ch, OMAP_DMA_DATA_BURST_16);
++//	omap_set_dma_dest_burst_mode(tx_dma->ch, OMAP_DMA_DATA_BURST_16);
++
++	return 0;
++}
++
++static void release_dma_controller()
++{
++
++	omap_free_dma(rx_dma->ch);
++	omap_free_dma(tx_dma->ch);
++
++	kfree(rx_dma);
++	kfree(tx_dma);
++}
++
++static int get_frame_from_fpga_start()
++{
++	struct usrp_e_dev *p = usrp_e_devp;
++	struct ring_buffer_info *rbi = &(*rx_rb.rbi)[rx_rb_write];
++	struct ring_buffer_entry *rbe = &(*rx_rb.rbe)[rx_rb_write];
++	u16 elements_to_read;
++
++	/* Check for space available in the ring buffer */
++	/* If no space, drop data. A read call will restart dma transfers. */
++	if (((*rx_rb.rbi)[rx_rb_write].flags & RB_KERNEL) && (gpio_get_value(RX_DATA_READY_GPIO)) && !rx_dma_active  && !shutting_down) {
++
++		rx_dma_active = 1;
++#ifdef DEBUG_RX
++		gpio_set_value(14, 1);
++#endif
++
++		elements_to_read = readw(p->ctl_addr + UE_REG_MISC_RX_LEN);
++		
++		rbi->flags = RB_DMA_ACTIVE;
++		
++		rbi->len = elements_to_read << 1;
++		
++		omap_set_dma_dest_addr_size(rx_dma->ch, rbe->dma_addr,
++					elements_to_read);
++		
++		dma_sync_single_for_device(NULL, rbe->dma_addr, SZ_2K, DMA_FROM_DEVICE);
++		
++		omap_start_dma(rx_dma->ch);
++	}
++
++	return 0;
++}
++
++
++static int get_frame_from_fpga_finish()
++{
++	dma_sync_single_for_cpu(NULL, (*rx_rb.rbe)[rx_rb_write].dma_addr, SZ_2K, DMA_FROM_DEVICE);
++
++	(*rx_rb.rbi)[rx_rb_write].flags = RB_USER;
++	rx_rb_write++;
++	if (rx_rb_write == rb_size.num_rx_frames)
++		rx_rb_write = 0;
++
++	wake_up_interruptible(&data_received_queue);
++
++	rx_dma_active = 0;
++
++	get_frame_from_fpga_start();
++
++#ifdef DEBUG_RX
++	gpio_set_value(14, 0);
++#endif
++
++	return 0;
++}
++
++static int send_frame_to_fpga_start()
++{
++	struct usrp_e_dev *p = usrp_e_devp;
++	struct ring_buffer_info *rbi = &(*tx_rb.rbi)[tx_rb_read];
++	struct ring_buffer_entry *rbe = &(*tx_rb.rbe)[tx_rb_read];
++	u16 elements_to_write;
++
++//	printk("In send_frame_to_fpga_start.\n");
++
++	/* Check if there is data to write to the FPGA, if so send it */
++	/* Otherwise, do nothing. Process is restarted by calls to write */
++	if (((*tx_rb.rbi)[tx_rb_read].flags & RB_USER) && !tx_dma_active && (gpio_get_value(TX_SPACE_AVAILABLE_GPIO)) && !shutting_down) {
++//		printk("In send_frame_to_fpga_start, past if.\n");
++		tx_dma_active = 1;
++#ifdef DEBUG_TX
++		gpio_set_value(14, 1);
++#endif
++
++		elements_to_write = ((rbi->len) >> 1);
++		
++		writew(elements_to_write, p->ctl_addr + UE_REG_MISC_TX_LEN);
++		
++		rbi->flags = RB_DMA_ACTIVE;
++		
++		omap_set_dma_src_addr_size(tx_dma->ch, rbe->dma_addr,
++					elements_to_write);
++		
++		dma_sync_single_for_device(NULL, rbe->dma_addr, SZ_2K, DMA_TO_DEVICE);
++		
++		omap_start_dma(tx_dma->ch);
++	}
++
++	return 0;
++}
++
++static int send_frame_to_fpga_finish()
++{
++
++	dma_sync_single_for_cpu(NULL, (*tx_rb.rbe)[tx_rb_read].dma_addr, SZ_2K, DMA_TO_DEVICE);
++	
++	(*tx_rb.rbi)[tx_rb_read].flags = RB_KERNEL;
++	
++	tx_rb_read++;
++	if (tx_rb_read == rb_size.num_tx_frames)
++		tx_rb_read = 0;
++	
++	wake_up_interruptible(&tx_rb_space_available);
++
++	tx_dma_active = 0;
++
++	send_frame_to_fpga_start();
++
++#ifdef DEBUG_TX
++	gpio_set_value(14, 0);
++#endif
++
++	return 0;
++}
++
++static int alloc_ring_buffer(struct ring_buffer *rb,
++			unsigned int num_bufs, enum dma_data_direction direction)
++{
++	int i;
++
++	rb->rbi = __get_free_page(GFP_KERNEL | __GFP_COMP | __GFP_ZERO | __GFP_NOWARN);
++
++	rb->rbe = kzalloc(sizeof(struct ring_buffer_entry) * num_bufs, GFP_KERNEL);
++	if (!rb) {
++		printk(KERN_ERR "Failed to allocate memory for rb entries\n");
++		return -ENOMEM;
++	}
++
++	rb->num_pages = (num_bufs & 1) ? ((num_bufs + 1) / 2) : (num_bufs / 2);
++
++	rb->pages = kzalloc(sizeof(unsigned long) * rb->num_pages, GFP_KERNEL);
++	if (!(rb->pages)) {
++		printk(KERN_ERR "Failed to allocate memory for rb page entries\n");
++		return -ENOMEM;
++	}
++
++	for (i = 0; i < rb->num_pages; i++) {
++		(*rb->pages)[i] = __get_free_page(GFP_KERNEL | __GFP_DMA | __GFP_COMP | __GFP_ZERO | __GFP_NOWARN);
++
++		(*(rb->rbe))[i*2].frame_addr =
++			(*(rb->pages))[i];
++		(*(rb->rbe))[i*2 + 1].frame_addr =
++			((*(rb->pages))[i] + SZ_2K);
++		if (!(*(rb->rbe))[i*2].frame_addr || !(*(rb->rbe))[i*2 + 1].frame_addr) {
++			printk(KERN_ERR "Failed to allocate memory dma buf\n");
++			return -ENOMEM;
++		}
++
++		(*(rb->rbe))[i*2].dma_addr = dma_map_single(NULL, (*(rb->rbe))[i*2].frame_addr, SZ_2K, direction);
++		(*(rb->rbe))[i*2 + 1].dma_addr = dma_map_single(NULL, (*(rb->rbe))[i*2 + 1].frame_addr, SZ_2K, direction);
++		if (!(*(rb->rbe))[i*2].dma_addr || !(*(rb->rbe))[i*2 + 1].dma_addr) {
++			printk(KERN_ERR "Failed to get physical address for dma buf\n");
++			return -ENOMEM;
++		}
++	}
++
++	return 0;
++}
++
++static void delete_ring_buffer(struct ring_buffer *rb,
++			unsigned int num_bufs, enum dma_data_direction direction)
++{
++	unsigned int i;
++	unsigned int num_pages;
++
++	printk(KERN_DEBUG "Entering delete_ring_buffer\n");
++
++	num_pages = (num_bufs & 1) ? ((num_bufs + 1) / 2) : (num_bufs / 2);
++
++	for (i = 0; i < num_pages; i++) {
++		dma_unmap_single(NULL, (*rb->rbe)[i*2].dma_addr, SZ_2K, direction);
++		dma_unmap_single(NULL, (*rb->rbe)[i*2 + 1].dma_addr, SZ_2K, direction);
++		free_page((*rb->pages)[i]);
++	}
++
++	free_page(rb->rbi);
++
++	kfree(rb->pages);
++	kfree(rb->rbe);
++
++	printk(KERN_DEBUG "Leaving delete_ring_buffer\n");
++}
++
++static int alloc_ring_buffers()
++{
++
++	if (alloc_ring_buffer(&tx_rb, rb_size.num_rx_frames, DMA_TO_DEVICE) < 0)
++		return -ENOMEM;
++	if (alloc_ring_buffer(&rx_rb, rb_size.num_tx_frames, DMA_FROM_DEVICE) < 0)
++		return -ENOMEM;
++
++	return 0;
++}
++
++static void init_ring_buffer(struct ring_buffer *rb, int num_bufs,
++			int initial_flags, enum dma_data_direction direction)
++{
++	int i;
++
++	for (i = 0; i < num_bufs; i++) {
++		dma_sync_single_for_device(NULL, (*rb->rbe)[i].dma_addr,
++					SZ_2K, direction);
++		dma_sync_single_for_cpu(NULL, (*rb->rbe)[i].dma_addr,
++					SZ_2K, direction);
++		(*rb->rbi)[i].flags = initial_flags;
++	}
++
++}
++
++#if 0
++static int tx_dma_func(void *data)
++{
++	int ret;
++	struct sched_param s = { .sched_priority = 1};
++
++	printk(KERN_DEBUG "In tx_dma_func\n");
++
++	allow_signal(SIGSTOP);
++
++	sched_setscheduler(current, SCHED_FIFO, &s);
++
++	while (!kthread_should_stop() && !closing_driver) {
++
++		if (!((*tx_rb.rbe)[tx_rb_read].flags & RB_USER)) {
++			tx_dma_waiting_for_data = 1;
++			ret = wait_event_interruptible(received_data_from_user,
++				     (*tx_rb.rbe)[tx_rb_read].flags & RB_USER);
++			if (ret) {
++				printk(KERN_DEBUG
++					"tx_dma_func received signal %d\n",
++					ret);
++				if (closing_driver)
++					break;
++
++			}
++			tx_dma_waiting_for_data = 0;
++		}
++
++		if (wait_event_interruptible(space_available_queue,
++				gpio_get_value(TX_SPACE_AVAILABLE_GPIO))) {
++			printk(KERN_DEBUG "tx_dma received signal waiting for space.\n");
++			if (closing_driver)
++				break;
++		}
++
++		if (send_frame_to_fpga(&(*tx_rb.rbe)[tx_rb_read]) != 0) {
++			printk(KERN_DEBUG "send_frame received signal.\n");
++			if (closing_driver)
++				break;
++		}
++
++		(*tx_rb.rbe)[tx_rb_read].flags = RB_KERNEL;
++
++		tx_rb_read++;
++		if (tx_rb_read == RB_SIZE)
++			tx_rb_read = 0;
++
++#if 0
++		if (waiting_for_space_in_tx_rb)
++#endif
++			wake_up_interruptible(&tx_rb_space_queue);
++
++	}
++	return 0;
++}
++#endif
+diff --git a/include/linux/usrp_e.h b/include/linux/usrp_e.h
+new file mode 100644
+index 0000000..e52f709
+--- /dev/null
++++ b/include/linux/usrp_e.h
+@@ -0,0 +1,87 @@
++
++/*
++ *  Copyright (C) 2010 Ettus Research, LLC
++ *
++ *  Written by Philip Balister <philip@opensdr.com>
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License as published by
++ *  the Free Software Foundation; either version 2 of the License, or
++ *  (at your option) any later version.
++ */
++
++#ifndef __USRP_E_H
++#define __USRP_E_H
++
++#include <linux/types.h>
++#include <linux/ioctl.h>
++
++struct usrp_e_ctl16 {
++	__u32 offset;
++	__u32 count;
++	__u16 buf[20];
++};
++
++struct usrp_e_ctl32 {
++	__u32 offset;
++	__u32 count;
++	__u32 buf[10];
++};
++
++/* SPI interface */
++
++#define UE_SPI_TXONLY	0
++#define UE_SPI_TXRX	1
++
++/* Defines for spi ctrl register */
++#define UE_SPI_CTRL_TXNEG	(BIT(10))
++#define UE_SPI_CTRL_RXNEG	(BIT(9))
++
++#define UE_SPI_PUSH_RISE	0
++#define UE_SPI_PUSH_FALL	UE_SPI_CTRL_TXNEG
++#define UE_SPI_LATCH_RISE	0
++#define UE_SPI_LATCH_FALL	UE_SPI_CTRL_RXNEG
++
++struct usrp_e_spi {
++	__u8 readback;
++	__u32 slave;
++	__u32 data;
++	__u32 length;
++	__u32 flags;
++};
++
++struct usrp_e_i2c {
++	__u8 addr;
++	__u32 len;
++	__u8 data[];
++};
++
++#define USRP_E_IOC_MAGIC	'u'
++#define USRP_E_WRITE_CTL16	_IOW(USRP_E_IOC_MAGIC, 0x20, struct usrp_e_ctl16)
++#define USRP_E_READ_CTL16	_IOWR(USRP_E_IOC_MAGIC, 0x21, struct usrp_e_ctl16)
++#define USRP_E_WRITE_CTL32	_IOW(USRP_E_IOC_MAGIC, 0x22, struct usrp_e_ctl32)
++#define USRP_E_READ_CTL32	_IOWR(USRP_E_IOC_MAGIC, 0x23, struct usrp_e_ctl32)
++#define USRP_E_SPI		_IOWR(USRP_E_IOC_MAGIC, 0x24, struct usrp_e_spi)
++#define USRP_E_I2C_READ		_IOWR(USRP_E_IOC_MAGIC, 0x25, struct usrp_e_i2c)
++#define USRP_E_I2C_WRITE	_IOW(USRP_E_IOC_MAGIC, 0x26, struct usrp_e_i2c)
++#define USRP_E_GET_RB_INFO      _IOR(USRP_E_IOC_MAGIC, 0x27, struct usrp_e_ring_buffer_size_t)
++
++/* Flag defines */
++#define RB_USER (BIT(0))
++#define RB_KERNEL (BIT(1))
++#define RB_OVERRUN (BIT(2))
++#define RB_DMA_ACTIVE (BIT(3))
++
++struct ring_buffer_info {
++	int flags;
++	int len;
++};
++
++struct usrp_e_ring_buffer_size_t {
++	int num_pages_rx_flags;
++	int num_rx_frames;
++	int num_pages_tx_flags;
++	int num_tx_frames;
++};
++
++#endif
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-2.6.37rc/beagleboard/defconfig b/recipes-bsp/linux/linux-omap-2.6.37rc/beagleboard/defconfig
new file mode 100644
index 0000000..d6d7cb8
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-2.6.37rc/beagleboard/defconfig
@@ -0,0 +1,3373 @@
+#
+# Automatically generated make config: don't edit
+# Linux/arm 2.6.37-rc7 Kernel Configuration
+# Wed Dec 29 11:57:49 2010
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+# CONFIG_AUDIT is not set
+# CONFIG_HAVE_GENERIC_HARDIRQS is not set
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_PREEMPT_RCU=y
+# CONFIG_TINY_RCU is not set
+# CONFIG_TINY_PREEMPT_RCU is not set
+CONFIG_PREEMPT_RCU=y
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_NS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
+CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+# CONFIG_BLK_CGROUP is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_MM_OWNER=y
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P64X0 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC100 is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_S5PV310 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_TCC_926 is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_PLAT_SPEAR is not set
+
+#
+# TI OMAP Common Features
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2PLUS=y
+
+#
+# OMAP Feature Selections
+#
+CONFIG_OMAP_SMARTREFLEX=y
+CONFIG_OMAP_SMARTREFLEX_CLASS3=y
+CONFIG_OMAP_RESET_CLOCKS=y
+# CONFIG_OMAP_MUX is not set
+CONFIG_OMAP_MCBSP=y
+CONFIG_OMAP_MBOX_FWK=m
+CONFIG_OMAP_MBOX_KFIFO_SIZE=256
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+
+#
+# TI OMAP2/3/4 Specific Features
+#
+CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+CONFIG_ARCH_OMAP3430=y
+CONFIG_OMAP_PACKAGE_CBB=y
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP3_BEAGLE=y
+# CONFIG_MACH_DEVKIT8000 is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OMAP3530_LV_SOM is not set
+# CONFIG_MACH_OMAP3_TORPEDO is not set
+CONFIG_MACH_OVERO=y
+CONFIG_MACH_OMAP3EVM=y
+# CONFIG_MACH_OMAP3517EVM is not set
+# CONFIG_MACH_CRANEBOARD is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+CONFIG_MACH_OMAP3_TOUCHBOOK=y
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RM680 is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+CONFIG_MACH_OMAP_ZOOM2=y
+# CONFIG_MACH_OMAP_ZOOM3 is not set
+# CONFIG_MACH_CM_T35 is not set
+# CONFIG_MACH_CM_T3517 is not set
+# CONFIG_MACH_IGEP0020 is not set
+# CONFIG_MACH_IGEP0030 is not set
+# CONFIG_MACH_SBC3530 is not set
+# CONFIG_MACH_OMAP_3630SDP is not set
+# CONFIG_OMAP3_EMU is not set
+# CONFIG_OMAP3_SDRC_AC_TIMING is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_THUMBEE=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_DMA_MEM_BUFFERABLE=y
+CONFIG_ARM_ERRATA_430973=y
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+# CONFIG_ARM_ERRATA_743622 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_LEDS=y
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_CC_STACKPROTECTOR is not set
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=" debug "
+# CONFIG_CMDLINE_FORCE is not set
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+# CONFIG_AUTO_ZRELADDR is not set
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_DEBUG=y
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_ADVANCED_DEBUG is not set
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_NVS=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_OPS=y
+CONFIG_ARCH_HAS_OPP=y
+CONFIG_PM_OPP=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+CONFIG_DEFAULT_CUBIC=y
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
+# CONFIG_IPV6_PIMSM_V2 is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETWORK_PHY_TIMESTAMPING=y
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_ZONES=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=m
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_CONNMARK=m
+
+#
+# Xtables targets
+#
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+
+#
+# Xtables matches
+#
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_VS=m
+CONFIG_IP_VS_IPV6=y
+CONFIG_IP_VS_DEBUG=y
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+# CONFIG_IP_VS_PROTO_SCTP is not set
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_NFCT=y
+CONFIG_IP_VS_PE_SIP=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV6=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=y
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_TFRC_LIB=y
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_RDS is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_L2TP=m
+CONFIG_L2TP_DEBUGFS=m
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=m
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=m
+# CONFIG_CAN_DEV is not set
+# CONFIG_CAN_DEBUG_DEVICES is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_ULTRA=y
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+CONFIG_IRDA_DEBUG=y
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+CONFIG_DONGLE=y
+CONFIG_ESI_DONGLE=m
+CONFIG_ACTISYS_DONGLE=m
+CONFIG_TEKRAM_DONGLE=m
+CONFIG_TOIM3232_DONGLE=m
+CONFIG_LITELINK_DONGLE=m
+CONFIG_MA600_DONGLE=m
+CONFIG_GIRBIL_DONGLE=m
+CONFIG_MCP2120_DONGLE=m
+CONFIG_OLD_BELKIN_DONGLE=m
+# CONFIG_ACT200L_DONGLE is not set
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_ATH3K=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_MRVL is not set
+CONFIG_BT_ATH3K=m
+CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_DEBUG is not set
+# CONFIG_RXKAD is not set
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_RC_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_WIMAX=m
+CONFIG_WIMAX_DEBUG_LEVEL=8
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_NET_9P=m
+# CONFIG_NET_9P_DEBUG is not set
+# CONFIG_CAIF is not set
+CONFIG_CEPH_LIB=m
+# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=""
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+CONFIG_SM_FTL=m
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_SM_COMMON is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_OMAP_PREFETCH=y
+# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_BLK_DEV_RBD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_APDS9802ALS is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_ISL29020 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+CONFIG_SENSORS_BH1780=m
+# CONFIG_SENSORS_BH1770 is not set
+# CONFIG_SENSORS_APDS990X is not set
+CONFIG_HMC6352=m
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
+CONFIG_BMP085=m
+CONFIG_USRP_E=m
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=m
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+CONFIG_EEPROM_93CX6=y
+CONFIG_IWMC3200TOP=m
+# CONFIG_IWMC3200TOP_DEBUG is not set
+# CONFIG_IWMC3200TOP_DEBUGFS is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+CONFIG_TI_ST=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+# CONFIG_DM_LOG_USERSPACE is not set
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+# CONFIG_DM_MULTIPATH_QL is not set
+# CONFIG_DM_MULTIPATH_ST is not set
+CONFIG_DM_DELAY=m
+# CONFIG_DM_UEVENT is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_EQUALIZER=m
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_MII=y
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+CONFIG_BCM63XX_PHY=m
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+CONFIG_MICREL_PHY=m
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_TI_DAVINCI_EMAC is not set
+CONFIG_TI_DAVINCI_MDIO=m
+CONFIG_TI_DAVINCI_CPDMA=m
+# CONFIG_DM9000 is not set
+CONFIG_ENC28J60=y
+# CONFIG_ENC28J60_WRITEVERIFY is not set
+# CONFIG_ETHOC is not set
+CONFIG_SMC911X=y
+CONFIG_SMSC911X=y
+# CONFIG_SMSC911X_ARCH_HOOKS is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_KS8851=y
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_LIBERTAS_THINFIRM is not set
+CONFIG_AT76C50X_USB=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_ATH_COMMON is not set
+CONFIG_B43=m
+# CONFIG_B43_SDIO is not set
+CONFIG_B43_PIO=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+# CONFIG_B43LEGACY is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+# CONFIG_IWM is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+# CONFIG_LIBERTAS_SDIO is not set
+# CONFIG_LIBERTAS_SPI is not set
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_LIBERTAS_MESH is not set
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+# CONFIG_P54_SPI is not set
+CONFIG_P54_LEDS=y
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+# CONFIG_RT2800USB is not set
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_WL1251=m
+CONFIG_WL1251_SPI=m
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX=m
+CONFIG_WL1271=m
+CONFIG_WL1271_SPI=m
+CONFIG_WL1271_SDIO=m
+CONFIG_WL12XX_PLATFORM_DATA=y
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+
+#
+# WiMAX Wireless Broadband devices
+#
+CONFIG_WIMAX_I2400M=m
+CONFIG_WIMAX_I2400M_USB=m
+CONFIG_WIMAX_I2400M_SDIO=m
+CONFIG_WIMAX_IWMC3200_SDIO=y
+CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=y
+CONFIG_USB_KAWETH=y
+CONFIG_USB_PEGASUS=y
+CONFIG_USB_RTL8150=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_CDC_EEM is not set
+CONFIG_USB_NET_DM9601=y
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=y
+CONFIG_USB_NET_GL620A=y
+CONFIG_USB_NET_NET1080=y
+CONFIG_USB_NET_PLUSB=y
+CONFIG_USB_NET_MCS7830=y
+CONFIG_USB_NET_RNDIS_HOST=y
+CONFIG_USB_NET_CDC_SUBSET=y
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+CONFIG_USB_NET_ZAURUS=y
+CONFIG_USB_NET_CX82310_ETH=m
+CONFIG_USB_HSO=m
+CONFIG_USB_NET_INT51X1=m
+CONFIG_USB_IPHETH=m
+CONFIG_USB_SIERRA_NET=m
+# CONFIG_WAN is not set
+CONFIG_ATM_DRIVERS=y
+# CONFIG_ATM_DUMMY is not set
+# CONFIG_ATM_TCP is not set
+
+#
+# CAIF transport drivers
+#
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+# CONFIG_PPPOATM is not set
+CONFIG_PPPOL2TP=m
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_QT2160=m
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+CONFIG_KEYBOARD_MCS=m
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_TWL4030 is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AD714X=m
+CONFIG_INPUT_AD714X_I2C=m
+CONFIG_INPUT_AD714X_SPI=m
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_TWL4030_PWRBUTTON=y
+CONFIG_INPUT_TWL4030_VIBRA=m
+CONFIG_INPUT_UINPUT=y
+CONFIG_INPUT_PCF8574=m
+CONFIG_INPUT_PWM_BEEPER=m
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+CONFIG_INPUT_ADXL34X=m
+CONFIG_INPUT_ADXL34X_I2C=m
+CONFIG_INPUT_ADXL34X_SPI=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_SERIO_PS2MULT is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+CONFIG_N_GSM=m
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX3107 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_OMAP=y
+CONFIG_SERIAL_OMAP_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_TTY_PRINTK=y
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_RAMOOPS is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=m
+
+#
+# Multiplexer I2C Chip support
+#
+# CONFIG_I2C_MUX_PCA9541 is not set
+# CONFIG_I2C_MUX_PCA954x is not set
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=m
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_MAX730X=m
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_BASIC_MMIO is not set
+# CONFIG_GPIO_IT8761E is not set
+# CONFIG_GPIO_VX855 is not set
+
+#
+# I2C GPIO expanders:
+#
+CONFIG_GPIO_MAX7300=m
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SX150X is not set
+CONFIG_GPIO_TWL4030=y
+CONFIG_GPIO_ADP5588=m
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_74X164 is not set
+
+#
+# AC97 GPIO expanders:
+#
+
+#
+# MODULbus GPIO expanders:
+#
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=m
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+CONFIG_TEST_POWER=m
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ20Z75 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+CONFIG_CHARGER_ISP1704=m
+CONFIG_CHARGER_TWL4030=m
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+CONFIG_SENSORS_ADT7411=m
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+CONFIG_SENSORS_ASC7621=m
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+CONFIG_SENSORS_GPIO_FAN=m
+# CONFIG_SENSORS_IT87 is not set
+CONFIG_SENSORS_JC42=m
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LTC4261 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+CONFIG_SENSORS_SMM665=m
+# CONFIG_SENSORS_DME1737 is not set
+CONFIG_SENSORS_EMC1403=m
+CONFIG_SENSORS_EMC2103=m
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+CONFIG_SENSORS_ADS7871=m
+CONFIG_SENSORS_AMC6821=m
+# CONFIG_SENSORS_THMC50 is not set
+CONFIG_SENSORS_TMP102=m
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83795 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+CONFIG_THERMAL=y
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+# CONFIG_TWL4030_WATCHDOG is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=y
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+# CONFIG_SSB_SDIOHOST is not set
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSB_DEBUG is not set
+CONFIG_MFD_SUPPORT=y
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TPS6507X=m
+CONFIG_TWL4030_CORE=y
+CONFIG_TWL4030_POWER=y
+CONFIG_TWL4030_CODEC=y
+CONFIG_TWL6030_PWM=m
+# CONFIG_MFD_STMPE is not set
+# CONFIG_MFD_TC35892 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_MAX8998 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X_I2C is not set
+# CONFIG_MFD_WM831X_SPI is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13XXX is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_EZX_PCAP is not set
+CONFIG_MFD_TPS6586X=y
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+CONFIG_REGULATOR_DUMMY=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8649 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
+# CONFIG_REGULATOR_MAX8952 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_LP3972 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_REGULATOR_ISL6271A is not set
+# CONFIG_REGULATOR_AD5398 is not set
+CONFIG_REGULATOR_TPS6586X=m
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_IR_CORE=m
+CONFIG_VIDEO_IR=m
+CONFIG_LIRC=m
+CONFIG_RC_MAP=m
+CONFIG_IR_NEC_DECODER=m
+CONFIG_IR_RC5_DECODER=m
+CONFIG_IR_RC6_DECODER=m
+CONFIG_IR_JVC_DECODER=m
+CONFIG_IR_SONY_DECODER=m
+CONFIG_IR_RC5_SZ_DECODER=m
+CONFIG_IR_LIRC_CODEC=m
+# CONFIG_IR_IMON is not set
+# CONFIG_IR_MCEUSB is not set
+# CONFIG_IR_STREAMZAP is not set
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+CONFIG_MEDIA_TUNER_CUSTOMISE=y
+
+#
+# Customize TV tuners
+#
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_MEDIA_TUNER_TDA18218=m
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DMA_CONTIG=y
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_V4L2_MEM2MEM_DEV=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+CONFIG_VIDEO_MSP3400=m
+# CONFIG_VIDEO_CS5345 is not set
+CONFIG_VIDEO_CS53L32A=m
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+CONFIG_VIDEO_WM8775=m
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# RDS decoders
+#
+# CONFIG_VIDEO_SAA6588 is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_ADV7180 is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_OV7670 is not set
+CONFIG_VIDEO_MT9V011=m
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_SAA7110 is not set
+CONFIG_VIDEO_SAA711X=m
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_SAA7191 is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_TVP7002 is not set
+# CONFIG_VIDEO_VPX3220 is not set
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+# CONFIG_VIDEO_AK881X is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+CONFIG_VIDEO_VIVI=m
+CONFIG_VIDEO_VPFE_CAPTURE=y
+# CONFIG_VIDEO_DM6446_CCDC is not set
+CONFIG_VIDEO_OMAP2_VOUT=y
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_AU0828 is not set
+CONFIG_VIDEO_SR030PC30=m
+# CONFIG_SOC_CAMERA is not set
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+# CONFIG_USB_GL860 is not set
+CONFIG_USB_GSPCA_BENQ=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_CPIA1=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+# CONFIG_USB_GSPCA_JEILINJ is not set
+CONFIG_USB_GSPCA_KONICA=m
+CONFIG_USB_GSPCA_MARS=m
+# CONFIG_USB_GSPCA_MR97310A is not set
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_OV534_9=m
+CONFIG_USB_GSPCA_PAC207=m
+# CONFIG_USB_GSPCA_PAC7302 is not set
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SN9C2028=m
+# CONFIG_USB_GSPCA_SN9C20X is not set
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+CONFIG_USB_GSPCA_SQ930X=m
+CONFIG_USB_GSPCA_STK014=m
+# CONFIG_USB_GSPCA_STV0680 is not set
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_XIRLINK_CIT=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_TLG2300=m
+CONFIG_VIDEO_CX231XX=m
+# CONFIG_VIDEO_CX231XX_ALSA is not set
+CONFIG_VIDEO_CX231XX_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_VIDEO_USBVIDEO=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+CONFIG_USB_ET61X251=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_MEM2MEM_TESTDEV=m
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_I2C_SI4713 is not set
+# CONFIG_RADIO_SI4713 is not set
+# CONFIG_USB_DSBR is not set
+# CONFIG_RADIO_SI470X is not set
+# CONFIG_USB_MR800 is not set
+# CONFIG_RADIO_TEA5764 is not set
+CONFIG_RADIO_SAA7706H=m
+# CONFIG_RADIO_TEF6862 is not set
+CONFIG_DVB_MAX_ADAPTERS=8
+CONFIG_DVB_DYNAMIC_MINORS=y
+CONFIG_DVB_CAPTURE_DRIVERS=y
+# CONFIG_TTPCI_EEPROM is not set
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_DW2102=m
+CONFIG_DVB_USB_CINERGY_T2=m
+CONFIG_DVB_USB_ANYSEE=m
+CONFIG_DVB_USB_DTV5100=m
+CONFIG_DVB_USB_AF9015=m
+# CONFIG_DVB_USB_CE6230 is not set
+# CONFIG_DVB_USB_FRIIO is not set
+# CONFIG_DVB_USB_EC168 is not set
+CONFIG_DVB_USB_AZ6027=m
+CONFIG_DVB_USB_LME2510=m
+# CONFIG_SMS_SIANO_MDTV is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+
+#
+# Multistandard (satellite) frontends
+#
+CONFIG_DVB_STB0899=m
+CONFIG_DVB_STB6100=m
+# CONFIG_DVB_STV090x is not set
+# CONFIG_DVB_STV6110x is not set
+
+#
+# DVB-S (satellite) frontends
+#
+# CONFIG_DVB_CX24110 is not set
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+# CONFIG_DVB_ZL10036 is not set
+CONFIG_DVB_ZL10039=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_STV6110=m
+CONFIG_DVB_STV0900=m
+# CONFIG_DVB_TDA8083 is not set
+CONFIG_DVB_TDA10086=m
+# CONFIG_DVB_TDA8261 is not set
+# CONFIG_DVB_VES1X93 is not set
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_TDA826X=m
+# CONFIG_DVB_TUA6100 is not set
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_SI21XX=m
+CONFIG_DVB_DS3000=m
+# CONFIG_DVB_MB86A16 is not set
+
+#
+# DVB-T (terrestrial) frontends
+#
+# CONFIG_DVB_SP8870 is not set
+# CONFIG_DVB_SP887X is not set
+# CONFIG_DVB_CX22700 is not set
+CONFIG_DVB_CX22702=m
+# CONFIG_DVB_S5H1432 is not set
+# CONFIG_DVB_DRX397XD is not set
+# CONFIG_DVB_L64781 is not set
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_AF9013=m
+# CONFIG_DVB_EC100 is not set
+
+#
+# DVB-C (cable) frontends
+#
+# CONFIG_DVB_VES1820 is not set
+# CONFIG_DVB_TDA10021 is not set
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+# CONFIG_DVB_OR51211 is not set
+# CONFIG_DVB_OR51132 is not set
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_S5H1409=m
+# CONFIG_DVB_AU8522 is not set
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+# CONFIG_DVB_S921 is not set
+CONFIG_DVB_DIB8000=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_TUNER_DIB0090=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+# CONFIG_DVB_ISL6405 is not set
+CONFIG_DVB_ISL6421=m
+# CONFIG_DVB_ISL6423 is not set
+# CONFIG_DVB_LGS8GL5 is not set
+CONFIG_DVB_LGS8GXX=m
+CONFIG_DVB_ATBM8830=m
+# CONFIG_DVB_TDA665x is not set
+CONFIG_DVB_IX2505V=m
+
+#
+# Tools to develop new frontends
+#
+# CONFIG_DVB_DUMMY_FE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+CONFIG_DRM=m
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_TMIO is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_OMAP2_VRAM=y
+CONFIG_OMAP2_VRFB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=14
+CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
+# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set
+CONFIG_OMAP2_DSS_DPI=y
+# CONFIG_OMAP2_DSS_RFBI is not set
+CONFIG_OMAP2_DSS_VENC=y
+# CONFIG_OMAP2_DSS_SDI is not set
+CONFIG_OMAP2_DSS_DSI=y
+CONFIG_OMAP2_DSS_USE_DSI_PLL=y
+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
+CONFIG_FB_OMAP2=y
+CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
+CONFIG_FB_OMAP2_NUM_FBS=2
+
+#
+# OMAP2/3 Display Device Drivers
+#
+CONFIG_PANEL_GENERIC=y
+CONFIG_PANEL_SHARP_LS037V7DW01=y
+# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set
+# CONFIG_PANEL_TAAL is not set
+CONFIG_PANEL_TOPPOLY_TDO35S=m
+CONFIG_PANEL_TPO_TD043MTEA1=m
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_RAWMIDI_SEQ=m
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+CONFIG_SND_ALOOP=m
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=y
+CONFIG_SND_USB_UA101=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_MCBSP=y
+CONFIG_SND_OMAP_SOC_OVERO=y
+CONFIG_SND_OMAP_SOC_OMAP3EVM=y
+CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE=y
+CONFIG_SND_OMAP_SOC_ZOOM2=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_TWL4030=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_3M_PCT is not set
+CONFIG_HID_A4TECH=y
+# CONFIG_HID_ACRUX_FF is not set
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+# CONFIG_HID_CANDO is not set
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+# CONFIG_HID_PRODIKEYS is not set
+CONFIG_HID_CYPRESS=y
+# CONFIG_HID_DRAGONRISE is not set
+CONFIG_HID_EGALAX=m
+# CONFIG_HID_ELECOM is not set
+CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
+CONFIG_HID_UCLOGIC=m
+CONFIG_HID_WALTOP=m
+CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
+# CONFIG_LOGIWII_FF is not set
+CONFIG_HID_MAGICMOUSE=m
+CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+# CONFIG_HID_ORTEK is not set
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_PICOLCD=m
+CONFIG_HID_PICOLCD_FB=y
+CONFIG_HID_PICOLCD_BACKLIGHT=y
+CONFIG_HID_PICOLCD_LEDS=y
+CONFIG_HID_QUANTA=m
+CONFIG_HID_ROCCAT=m
+CONFIG_HID_ROCCAT_KONE=m
+# CONFIG_HID_ROCCAT_PYRA is not set
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_STANTUM=m
+CONFIG_HID_SUNPLUS=y
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+CONFIG_HID_TOPSEED=y
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_ZEROPLUS is not set
+# CONFIG_HID_ZYDACRON is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_U132_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_AM35X is not set
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_UAS=m
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP210X is not set
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_QCAUX=m
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+CONFIG_USB_SERIAL_SAMBA=m
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+# CONFIG_USB_SERIAL_SYMBOL is not set
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+# CONFIG_USB_SERIAL_OPTION is not set
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
+CONFIG_USB_SERIAL_ZIO=m
+CONFIG_USB_SERIAL_SSU100=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+# CONFIG_USB_APPLEDISPLAY is not set
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+CONFIG_USB_YUREX=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=480
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FUNCTIONFS=m
+# CONFIG_USB_FUNCTIONFS_ETH is not set
+CONFIG_USB_FUNCTIONFS_RNDIS=y
+# CONFIG_USB_FUNCTIONFS_GENERIC is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
+CONFIG_USB_G_HID=m
+CONFIG_USB_G_DBGP=m
+# CONFIG_USB_G_DBGP_PRINTK is not set
+CONFIG_USB_G_DBGP_SERIAL=y
+CONFIG_USB_G_WEBCAM=m
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=y
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_USB_ULPI is not set
+CONFIG_TWL4030_USB=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+CONFIG_MMC_SPI=m
+CONFIG_MMC_USHC=m
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+CONFIG_LEDS_LP5521=m
+CONFIG_LEDS_LP5523=m
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+CONFIG_LEDS_PWM=m
+CONFIG_LEDS_REGULATOR=m
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS3232 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_ISL12022 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+CONFIG_RTC_DRV_BQ32K=m
+CONFIG_RTC_DRV_TWL4030=m
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+CONFIG_STAGING=y
+# CONFIG_STAGING_EXCLUDE_BUILD is not set
+# CONFIG_VIDEO_TM6000 is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_USB_IP_COMMON is not set
+CONFIG_W35UND=m
+CONFIG_PRISM2_USB=m
+CONFIG_ECHO=m
+CONFIG_BRCM80211=m
+CONFIG_BRCMFMAC=y
+CONFIG_RT2870=m
+# CONFIG_COMEDI is not set
+# CONFIG_ASUS_OLED is not set
+CONFIG_R8712U=m
+CONFIG_R8712_AP=y
+# CONFIG_TRANZPORT is not set
+# CONFIG_POHMELFS is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_LINE6_USB is not set
+# CONFIG_USB_SERIAL_QUATECH2 is not set
+# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
+# CONFIG_VT6656 is not set
+CONFIG_FB_UDL=m
+# CONFIG_IIO is not set
+CONFIG_ZRAM=m
+# CONFIG_BATMAN_ADV is not set
+# CONFIG_FB_SM7XX is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+CONFIG_ST_BT=m
+CONFIG_ADIS16255=m
+# CONFIG_LIRC_STAGING is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_EASYCAP is not set
+# CONFIG_TIDSPBRIDGE is not set
+# CONFIG_MACH_OMAP3_WESTBRIDGE_AST_PNAND_HAL is not set
+CONFIG_MACH_NO_WESTBRIDGE=y
+# CONFIG_ATH6K_LEGACY is not set
+CONFIG_USB_ENESTORAGE=m
+CONFIG_BCM_WIMAX=m
+CONFIG_FT1000=m
+CONFIG_FT1000_USB=m
+
+#
+# Speakup console speech
+#
+# CONFIG_SPEAKUP is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+# CONFIG_EXT4_FS_POSIX_ACL is not set
+# CONFIG_EXT4_FS_SECURITY is not set
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+CONFIG_REISERFS_PROC_INFO=y
+CONFIG_REISERFS_FS_XATTR=y
+# CONFIG_REISERFS_FS_POSIX_ACL is not set
+# CONFIG_REISERFS_FS_SECURITY is not set
+CONFIG_JFS_FS=m
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=m
+# CONFIG_GFS2_FS_LOCKING_DLM is not set
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+CONFIG_OCFS2_FS_STATS=y
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_BTRFS_FS=m
+# CONFIG_BTRFS_FS_POSIX_ACL is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_EXPORTFS=m
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+# CONFIG_CUSE is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+# CONFIG_ECRYPT_FS is not set
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+# CONFIG_JFFS2_CMODE_PRIORITY is not set
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_JFFS2_CMODE_FAVOURLZO=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+CONFIG_LOGFS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_XATTR is not set
+CONFIG_SQUASHFS_LZO=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_ROMFS_FS=m
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+# CONFIG_NFS_USE_NEW_IDMAPPER is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_DEPRECATED=y
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+CONFIG_CEPH_FS=m
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_STATS2=y
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+CONFIG_CIFS_EXPERIMENTAL=y
+CONFIG_NCP_FS=m
+# CONFIG_NCPFS_PACKET_SIGNING is not set
+# CONFIG_NCPFS_IOCTL_LOCKING is not set
+# CONFIG_NCPFS_STRONG is not set
+# CONFIG_NCPFS_NFS_NS is not set
+# CONFIG_NCPFS_OS2_NS is not set
+# CONFIG_NCPFS_SMALLDOS is not set
+# CONFIG_NCPFS_NLS is not set
+# CONFIG_NCPFS_EXTRAS is not set
+CONFIG_CODA_FS=m
+CONFIG_AFS_FS=m
+# CONFIG_AFS_DEBUG is not set
+CONFIG_9P_FS=m
+# CONFIG_9P_FS_POSIX_ACL is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+# CONFIG_UNIXWARE_DISKLABEL is not set
+CONFIG_LDM_PARTITION=y
+CONFIG_LDM_DEBUG=y
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_BKL=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_ASYNC_RAID6_TEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
+CONFIG_ASYNC_PQ=m
+CONFIG_ASYNC_RAID6_RECOV=m
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_GHASH=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_OMAP_SHAM=m
+CONFIG_CRYPTO_DEV_OMAP_AES=m
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_RAID6_PQ=m
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_BTREE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/recipes-bsp/linux/linux-omap-2.6.37rc/beagleboard/logo_linux_clut224.ppm b/recipes-bsp/linux/linux-omap-2.6.37rc/beagleboard/logo_linux_clut224.ppm
new file mode 100644
index 0000000..d29fc1c
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-2.6.37rc/beagleboard/logo_linux_clut224.ppm
@@ -0,0 +1,73147 @@
+P3
+# CREATOR: GIMP PNM Filter Version 1.1
+387 63
+255
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+116
+28
+246
+116
+28
+246
+116
+28
+246
+116
+28
+246
+116
+28
+246
+116
+28
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+111
+26
+246
+116
+28
+246
+116
+28
+247
+118
+39
+247
+118
+39
+247
+118
+39
+246
+116
+28
+247
+111
+26
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+111
+26
+246
+116
+28
+247
+118
+39
+247
+118
+39
+247
+118
+39
+246
+116
+28
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+111
+26
+246
+116
+28
+247
+118
+39
+247
+118
+39
+247
+118
+39
+246
+116
+28
+247
+111
+26
+247
+111
+26
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+111
+26
+246
+116
+28
+247
+118
+39
+247
+118
+39
+247
+118
+39
+246
+116
+28
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+118
+39
+247
+123
+41
+247
+123
+41
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+123
+41
+247
+123
+41
+247
+118
+39
+246
+116
+28
+247
+111
+26
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+246
+109
+10
+247
+111
+26
+246
+116
+28
+247
+118
+39
+247
+123
+41
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+123
+41
+247
+118
+39
+246
+116
+28
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+111
+26
+246
+116
+28
+247
+123
+41
+247
+123
+41
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+123
+41
+247
+118
+39
+247
+111
+26
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+118
+39
+247
+123
+41
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+123
+41
+247
+123
+41
+247
+118
+39
+247
+111
+26
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+111
+26
+246
+116
+28
+247
+123
+41
+247
+123
+41
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+123
+41
+247
+118
+39
+247
+111
+26
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+247
+111
+26
+246
+116
+28
+247
+118
+39
+247
+123
+41
+247
+130
+53
+248
+138
+64
+250
+139
+73
+247
+143
+74
+247
+143
+74
+249
+146
+83
+249
+146
+83
+249
+146
+83
+247
+143
+74
+250
+139
+73
+248
+138
+64
+247
+130
+53
+247
+123
+41
+247
+118
+39
+246
+116
+28
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+246
+109
+10
+247
+111
+26
+246
+116
+28
+247
+123
+41
+247
+130
+53
+248
+138
+64
+250
+139
+73
+247
+143
+74
+247
+143
+74
+250
+139
+73
+248
+138
+64
+247
+130
+53
+247
+123
+41
+246
+116
+28
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+118
+39
+247
+123
+41
+247
+130
+60
+248
+138
+64
+247
+143
+74
+247
+143
+74
+247
+143
+74
+250
+139
+73
+247
+130
+60
+247
+130
+53
+247
+123
+41
+246
+116
+28
+247
+111
+26
+246
+109
+10
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+118
+39
+247
+130
+53
+247
+130
+60
+250
+139
+73
+247
+143
+74
+247
+143
+74
+247
+143
+74
+248
+138
+64
+247
+130
+60
+247
+130
+53
+247
+118
+39
+247
+111
+26
+247
+111
+26
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+118
+39
+247
+123
+41
+247
+130
+60
+248
+138
+64
+247
+143
+74
+247
+143
+74
+247
+143
+74
+250
+139
+73
+247
+130
+60
+247
+130
+53
+247
+123
+41
+246
+116
+28
+247
+111
+26
+246
+109
+10
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+247
+111
+26
+246
+116
+28
+247
+118
+39
+247
+130
+53
+247
+130
+60
+250
+139
+73
+249
+146
+83
+249
+152
+92
+249
+159
+103
+249
+159
+103
+247
+165
+111
+251
+168
+115
+251
+168
+115
+247
+165
+111
+247
+165
+111
+249
+159
+103
+249
+152
+92
+249
+146
+83
+250
+139
+73
+247
+130
+60
+247
+123
+41
+247
+118
+39
+247
+111
+26
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+246
+116
+28
+247
+123
+41
+247
+130
+60
+247
+143
+74
+247
+150
+84
+246
+156
+93
+249
+159
+103
+249
+159
+103
+246
+156
+93
+247
+150
+84
+250
+139
+73
+247
+130
+60
+247
+123
+41
+246
+116
+28
+247
+111
+26
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+118
+39
+247
+123
+41
+248
+138
+64
+247
+143
+74
+249
+152
+92
+249
+159
+103
+249
+159
+103
+249
+159
+103
+246
+156
+93
+247
+150
+84
+250
+139
+73
+247
+130
+53
+247
+123
+41
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+118
+39
+247
+130
+53
+248
+138
+64
+249
+146
+83
+249
+152
+92
+249
+159
+103
+249
+159
+103
+249
+159
+103
+249
+152
+92
+249
+146
+83
+248
+138
+64
+247
+130
+53
+247
+118
+39
+247
+111
+26
+246
+109
+10
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+118
+39
+247
+130
+53
+248
+138
+64
+247
+143
+74
+249
+152
+92
+249
+159
+103
+249
+159
+103
+249
+159
+103
+246
+156
+93
+247
+150
+84
+250
+139
+73
+247
+130
+53
+247
+123
+41
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+118
+39
+247
+123
+41
+247
+130
+60
+250
+139
+73
+247
+150
+84
+249
+159
+103
+247
+165
+111
+249
+174
+124
+248
+180
+134
+252
+185
+144
+240
+181
+138
+219
+170
+138
+219
+170
+138
+230
+173
+136
+240
+181
+138
+248
+180
+134
+249
+174
+124
+247
+165
+111
+249
+159
+103
+249
+146
+83
+248
+138
+64
+247
+130
+53
+247
+123
+41
+247
+111
+26
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+123
+41
+247
+130
+60
+247
+143
+74
+249
+159
+103
+214
+151
+109
+121
+100
+85
+65
+67
+64
+74
+68
+68
+129
+102
+78
+214
+151
+109
+246
+156
+93
+247
+143
+74
+247
+130
+53
+247
+118
+39
+247
+111
+26
+246
+109
+10
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+111
+26
+246
+116
+28
+247
+123
+41
+248
+138
+64
+249
+146
+83
+249
+159
+103
+204
+141
+99
+102
+91
+75
+65
+67
+64
+81
+77
+76
+146
+111
+88
+238
+159
+107
+249
+152
+92
+250
+139
+73
+247
+130
+53
+247
+118
+39
+247
+111
+26
+246
+109
+10
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+118
+39
+247
+130
+53
+248
+138
+64
+247
+150
+84
+245
+162
+103
+162
+125
+96
+81
+77
+76
+55
+66
+67
+99
+90
+79
+187
+140
+108
+249
+159
+103
+247
+150
+84
+248
+138
+64
+247
+123
+41
+246
+116
+28
+247
+111
+26
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+111
+26
+246
+116
+28
+247
+123
+41
+248
+138
+64
+249
+146
+83
+249
+159
+103
+187
+140
+108
+102
+91
+75
+58
+69
+70
+76
+78
+76
+146
+111
+88
+238
+159
+107
+249
+152
+92
+250
+139
+73
+247
+130
+53
+247
+118
+39
+247
+111
+26
+246
+109
+10
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+246
+109
+10
+247
+111
+26
+246
+116
+28
+247
+123
+41
+247
+130
+53
+248
+138
+64
+249
+146
+83
+249
+159
+103
+251
+168
+115
+248
+180
+134
+239
+182
+144
+186
+157
+134
+124
+111
+99
+82
+69
+65
+65
+58
+56
+55
+48
+48
+65
+58
+56
+65
+58
+56
+65
+58
+56
+99
+90
+79
+158
+130
+108
+230
+173
+136
+250
+176
+132
+247
+165
+111
+249
+152
+92
+247
+143
+74
+247
+130
+53
+247
+123
+41
+246
+116
+28
+247
+111
+26
+246
+109
+10
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+111
+26
+247
+118
+39
+247
+130
+53
+250
+139
+73
+246
+156
+93
+214
+151
+109
+74
+68
+68
+56
+64
+60
+95
+87
+59
+88
+82
+59
+56
+64
+60
+81
+77
+76
+238
+159
+107
+249
+152
+92
+248
+138
+64
+247
+130
+53
+246
+116
+28
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+118
+39
+247
+130
+53
+247
+143
+74
+249
+159
+103
+187
+140
+108
+51
+62
+63
+69
+69
+61
+95
+87
+59
+83
+78
+61
+48
+58
+59
+121
+100
+85
+247
+165
+111
+247
+150
+84
+248
+138
+64
+247
+123
+41
+246
+116
+28
+246
+109
+10
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+123
+41
+247
+130
+60
+247
+150
+84
+247
+165
+111
+139
+115
+96
+48
+58
+59
+95
+78
+64
+118
+86
+65
+81
+73
+62
+48
+58
+59
+162
+125
+96
+249
+159
+103
+249
+146
+83
+247
+130
+60
+247
+123
+41
+247
+111
+26
+246
+109
+10
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+118
+39
+247
+130
+53
+247
+143
+74
+249
+159
+103
+187
+140
+108
+48
+58
+59
+76
+70
+64
+118
+86
+65
+95
+78
+64
+51
+62
+63
+121
+100
+85
+247
+165
+111
+247
+150
+84
+248
+138
+64
+247
+123
+41
+247
+111
+26
+246
+109
+10
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+246
+109
+10
+247
+111
+26
+246
+116
+28
+247
+123
+41
+247
+130
+60
+247
+143
+74
+249
+152
+92
+247
+165
+111
+250
+176
+132
+251
+192
+154
+167
+142
+123
+65
+58
+56
+35
+31
+30
+71
+60
+43
+108
+87
+46
+129
+106
+52
+137
+110
+49
+156
+125
+62
+187
+166
+150
+129
+106
+52
+101
+83
+47
+59
+50
+39
+55
+48
+48
+139
+115
+96
+240
+181
+138
+249
+174
+124
+249
+159
+103
+247
+143
+74
+247
+130
+53
+247
+123
+41
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+123
+41
+247
+130
+60
+247
+150
+84
+247
+165
+111
+124
+111
+99
+56
+64
+60
+137
+110
+49
+171
+129
+45
+171
+129
+45
+129
+106
+52
+51
+62
+63
+162
+125
+96
+247
+165
+111
+249
+146
+83
+247
+130
+60
+247
+118
+39
+247
+111
+26
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+123
+41
+248
+138
+64
+249
+152
+92
+245
+169
+119
+81
+77
+76
+69
+69
+61
+152
+119
+47
+171
+129
+45
+171
+129
+45
+105
+93
+60
+48
+58
+59
+187
+140
+108
+249
+159
+103
+247
+143
+74
+247
+130
+53
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+111
+26
+246
+116
+28
+247
+130
+53
+250
+139
+73
+249
+159
+103
+210
+156
+119
+51
+62
+63
+112
+85
+63
+234
+126
+45
+234
+126
+45
+225
+124
+48
+95
+78
+64
+63
+74
+74
+234
+168
+124
+246
+156
+93
+250
+139
+73
+247
+123
+41
+246
+116
+28
+246
+109
+10
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+123
+41
+248
+138
+64
+249
+152
+92
+245
+169
+119
+81
+77
+76
+81
+73
+62
+212
+120
+56
+234
+126
+45
+234
+126
+45
+135
+94
+64
+41
+58
+57
+187
+140
+108
+249
+159
+103
+247
+143
+74
+247
+130
+53
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+246
+116
+28
+247
+123
+41
+247
+130
+60
+249
+146
+83
+249
+159
+103
+249
+174
+124
+249
+189
+146
+236
+186
+153
+99
+90
+79
+47
+40
+38
+85
+71
+43
+145
+114
+49
+171
+129
+45
+171
+129
+45
+171
+129
+45
+168
+127
+42
+160
+120
+43
+195
+167
+113
+216
+194
+154
+168
+127
+42
+168
+127
+42
+123
+102
+54
+59
+50
+39
+82
+69
+65
+230
+173
+136
+249
+174
+124
+249
+159
+103
+247
+143
+74
+247
+130
+53
+247
+118
+39
+247
+111
+26
+246
+109
+10
+247
+103
+7
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+123
+41
+248
+138
+64
+246
+156
+93
+245
+169
+119
+84
+85
+82
+83
+78
+61
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+75
+74
+61
+101
+100
+92
+249
+174
+124
+246
+156
+93
+248
+138
+64
+247
+123
+41
+246
+116
+28
+247
+111
+26
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+111
+26
+247
+118
+39
+247
+130
+53
+247
+143
+74
+249
+159
+103
+210
+156
+119
+48
+58
+59
+105
+93
+60
+171
+129
+45
+158
+125
+46
+161
+127
+40
+152
+119
+47
+62
+63
+61
+139
+115
+96
+251
+168
+115
+247
+150
+84
+247
+130
+60
+247
+123
+41
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+111
+26
+247
+118
+39
+247
+130
+53
+249
+146
+83
+247
+165
+111
+158
+130
+108
+51
+62
+63
+188
+112
+56
+234
+125
+52
+224
+123
+55
+234
+126
+45
+163
+104
+61
+48
+58
+59
+210
+156
+119
+247
+165
+111
+249
+146
+83
+247
+130
+60
+247
+118
+39
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+118
+39
+247
+130
+53
+247
+143
+74
+247
+165
+111
+210
+156
+119
+55
+66
+67
+146
+97
+64
+234
+126
+45
+224
+123
+55
+234
+125
+52
+199
+115
+54
+62
+63
+61
+139
+115
+96
+251
+168
+115
+247
+150
+84
+247
+130
+60
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+111
+26
+246
+116
+28
+247
+123
+41
+247
+130
+60
+249
+146
+83
+249
+159
+103
+250
+176
+132
+219
+170
+138
+150
+125
+114
+65
+58
+56
+24
+22
+23
+59
+50
+39
+152
+119
+47
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+160
+120
+43
+158
+125
+46
+227
+196
+175
+192
+155
+91
+160
+120
+43
+171
+129
+45
+158
+125
+46
+85
+71
+43
+65
+58
+56
+219
+170
+138
+249
+174
+124
+246
+156
+93
+250
+139
+73
+247
+130
+53
+247
+118
+39
+247
+111
+26
+246
+109
+10
+247
+103
+7
+246
+97
+3
+247
+103
+7
+246
+109
+10
+246
+116
+28
+247
+130
+53
+247
+143
+74
+249
+159
+103
+230
+173
+136
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+91
+92
+89
+252
+185
+144
+247
+165
+111
+249
+146
+83
+247
+130
+60
+247
+123
+41
+246
+116
+28
+247
+111
+26
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+111
+26
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+111
+26
+246
+116
+28
+247
+123
+41
+248
+138
+64
+249
+152
+92
+249
+174
+124
+203
+161
+131
+43
+57
+62
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+63
+69
+60
+133
+120
+107
+250
+176
+132
+246
+156
+93
+248
+138
+64
+247
+123
+41
+246
+116
+28
+247
+111
+26
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+111
+26
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+123
+41
+248
+138
+64
+249
+152
+92
+249
+174
+124
+154
+133
+118
+56
+64
+60
+199
+115
+54
+227
+126
+50
+224
+123
+55
+234
+125
+52
+183
+110
+59
+51
+62
+63
+186
+157
+134
+250
+176
+132
+246
+156
+93
+250
+139
+73
+247
+130
+53
+247
+118
+39
+247
+111
+26
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+111
+26
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+118
+39
+247
+130
+53
+250
+139
+73
+246
+156
+93
+249
+174
+124
+209
+171
+139
+51
+62
+63
+155
+100
+63
+234
+125
+52
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+133
+120
+107
+249
+174
+124
+246
+156
+93
+248
+138
+64
+247
+123
+41
+247
+111
+26
+246
+109
+10
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+111
+26
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+118
+39
+247
+130
+53
+247
+143
+74
+249
+159
+103
+250
+176
+132
+158
+130
+108
+47
+40
+38
+59
+50
+39
+85
+71
+43
+85
+71
+43
+59
+50
+39
+35
+31
+30
+123
+102
+54
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+152
+119
+47
+192
+155
+91
+224
+207
+180
+158
+125
+46
+160
+120
+43
+168
+127
+42
+171
+129
+45
+71
+60
+43
+82
+69
+65
+239
+182
+144
+249
+174
+124
+249
+152
+92
+248
+138
+64
+247
+123
+41
+246
+116
+28
+247
+111
+26
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+111
+26
+247
+118
+39
+247
+130
+53
+249
+146
+83
+247
+165
+111
+239
+182
+144
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+91
+92
+89
+250
+197
+158
+250
+176
+132
+249
+159
+103
+247
+143
+74
+247
+130
+60
+247
+123
+41
+247
+118
+39
+246
+116
+28
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+116
+28
+247
+118
+39
+247
+118
+39
+247
+118
+39
+246
+116
+28
+246
+116
+28
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+111
+26
+246
+116
+28
+246
+116
+28
+246
+116
+28
+247
+118
+39
+247
+118
+39
+246
+116
+28
+246
+116
+28
+246
+116
+28
+246
+116
+28
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+116
+28
+246
+116
+28
+247
+118
+39
+247
+118
+39
+246
+116
+28
+246
+116
+28
+246
+116
+28
+246
+116
+28
+246
+116
+28
+247
+118
+39
+247
+123
+41
+247
+130
+60
+249
+146
+83
+249
+159
+103
+248
+180
+134
+212
+173
+150
+48
+58
+59
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+65
+67
+64
+137
+127
+115
+248
+180
+134
+249
+159
+103
+247
+143
+74
+247
+130
+53
+247
+118
+39
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+116
+28
+247
+118
+39
+247
+118
+39
+247
+118
+39
+246
+116
+28
+246
+116
+28
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+118
+39
+247
+130
+53
+250
+139
+73
+249
+159
+103
+250
+176
+132
+167
+142
+123
+56
+64
+60
+199
+115
+54
+227
+126
+50
+224
+123
+55
+234
+125
+52
+173
+106
+60
+48
+58
+59
+187
+166
+150
+249
+189
+146
+251
+168
+115
+249
+152
+92
+250
+139
+73
+247
+130
+53
+247
+123
+41
+246
+116
+28
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+116
+28
+246
+116
+28
+247
+118
+39
+247
+118
+39
+246
+116
+28
+246
+116
+28
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+116
+28
+246
+116
+28
+247
+118
+39
+247
+118
+39
+246
+116
+28
+246
+116
+28
+246
+116
+28
+246
+116
+28
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+116
+28
+247
+123
+41
+247
+130
+53
+248
+138
+64
+247
+150
+84
+247
+165
+111
+252
+185
+144
+212
+173
+150
+51
+62
+63
+155
+100
+63
+234
+125
+52
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+133
+120
+107
+248
+180
+134
+249
+159
+103
+250
+139
+73
+247
+123
+41
+247
+111
+26
+246
+109
+10
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+116
+28
+246
+116
+28
+247
+118
+39
+247
+118
+39
+247
+118
+39
+246
+116
+28
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+103
+7
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+116
+28
+246
+116
+28
+247
+118
+39
+247
+118
+39
+246
+116
+28
+246
+116
+28
+246
+116
+28
+246
+116
+28
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+111
+26
+247
+118
+39
+247
+130
+53
+250
+139
+73
+249
+159
+103
+250
+176
+132
+167
+142
+123
+24
+22
+23
+85
+71
+43
+158
+125
+46
+171
+129
+45
+171
+129
+45
+171
+129
+45
+85
+71
+43
+35
+31
+30
+145
+114
+49
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+152
+119
+47
+216
+194
+154
+195
+167
+113
+152
+119
+47
+158
+125
+46
+168
+127
+42
+158
+125
+46
+59
+50
+39
+139
+115
+96
+252
+185
+144
+247
+165
+111
+247
+150
+84
+247
+130
+60
+247
+123
+41
+247
+111
+26
+246
+109
+10
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+118
+39
+247
+130
+60
+247
+150
+84
+251
+168
+115
+236
+186
+153
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+91
+92
+89
+251
+209
+178
+249
+189
+146
+249
+174
+124
+249
+159
+103
+249
+146
+83
+248
+138
+64
+247
+130
+53
+247
+130
+53
+247
+123
+41
+247
+118
+39
+246
+116
+28
+247
+111
+26
+247
+111
+26
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+247
+111
+26
+246
+116
+28
+247
+118
+39
+247
+123
+41
+247
+123
+41
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+123
+41
+247
+123
+41
+246
+116
+28
+247
+111
+26
+247
+111
+26
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+111
+26
+246
+116
+28
+247
+118
+39
+247
+123
+41
+247
+123
+41
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+118
+39
+246
+116
+28
+246
+116
+28
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+116
+28
+247
+118
+39
+247
+123
+41
+247
+123
+41
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+248
+138
+64
+247
+143
+74
+246
+156
+93
+249
+174
+124
+251
+192
+154
+207
+178
+158
+48
+58
+59
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+63
+69
+60
+137
+127
+115
+249
+189
+146
+247
+165
+111
+247
+150
+84
+248
+138
+64
+247
+130
+53
+247
+123
+41
+247
+118
+39
+247
+123
+41
+247
+123
+41
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+123
+41
+247
+118
+39
+247
+118
+39
+247
+118
+39
+247
+123
+41
+247
+130
+60
+247
+143
+74
+249
+159
+103
+252
+185
+144
+167
+142
+123
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+234
+125
+52
+173
+106
+60
+51
+62
+63
+187
+166
+150
+250
+200
+166
+248
+180
+134
+247
+165
+111
+249
+152
+92
+247
+143
+74
+247
+130
+60
+247
+130
+53
+247
+123
+41
+247
+123
+41
+247
+118
+39
+247
+111
+26
+247
+111
+26
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+118
+39
+247
+123
+41
+247
+123
+41
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+123
+41
+247
+123
+41
+247
+118
+39
+247
+111
+26
+247
+111
+26
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+118
+39
+247
+123
+41
+247
+123
+41
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+130
+53
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+118
+39
+247
+118
+39
+247
+118
+39
+247
+118
+39
+247
+118
+39
+247
+118
+39
+247
+118
+39
+247
+123
+41
+247
+123
+41
+247
+130
+53
+247
+130
+60
+250
+139
+73
+249
+152
+92
+247
+165
+111
+248
+180
+134
+250
+197
+158
+207
+178
+158
+51
+62
+63
+155
+100
+63
+234
+125
+52
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+252
+185
+144
+249
+159
+103
+247
+143
+74
+247
+130
+53
+246
+116
+28
+246
+109
+10
+247
+103
+7
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+118
+39
+247
+123
+41
+247
+123
+41
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+123
+41
+247
+123
+41
+247
+118
+39
+246
+116
+28
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+116
+28
+247
+118
+39
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+130
+53
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+118
+39
+247
+118
+39
+246
+116
+28
+246
+116
+28
+246
+116
+28
+247
+118
+39
+247
+118
+39
+247
+123
+41
+247
+123
+41
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+118
+39
+246
+116
+28
+247
+111
+26
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+123
+41
+248
+138
+64
+247
+150
+84
+251
+168
+115
+230
+173
+136
+47
+40
+38
+59
+50
+39
+168
+127
+42
+168
+127
+42
+158
+125
+46
+158
+125
+46
+161
+127
+40
+171
+129
+45
+59
+50
+39
+71
+60
+43
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+152
+119
+47
+170
+137
+67
+239
+227
+208
+170
+137
+67
+160
+120
+43
+158
+125
+46
+171
+129
+45
+123
+102
+54
+47
+40
+38
+209
+171
+139
+248
+180
+134
+247
+165
+111
+249
+146
+83
+247
+130
+60
+247
+123
+41
+247
+111
+26
+247
+111
+26
+246
+109
+10
+247
+111
+26
+247
+123
+41
+247
+130
+60
+247
+150
+84
+249
+174
+124
+236
+186
+153
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+91
+92
+89
+255
+215
+190
+253
+204
+176
+249
+189
+146
+249
+174
+124
+247
+165
+111
+246
+156
+93
+249
+146
+83
+247
+143
+74
+248
+138
+64
+247
+130
+60
+247
+130
+53
+247
+123
+41
+246
+116
+28
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+116
+28
+247
+118
+39
+247
+123
+41
+247
+130
+53
+248
+138
+64
+250
+139
+73
+247
+143
+74
+249
+146
+83
+247
+150
+84
+249
+146
+83
+249
+146
+83
+247
+143
+74
+248
+138
+64
+247
+130
+60
+247
+130
+53
+247
+123
+41
+247
+118
+39
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+109
+10
+247
+111
+26
+247
+111
+26
+246
+116
+28
+247
+118
+39
+247
+123
+41
+247
+130
+53
+248
+138
+64
+250
+139
+73
+247
+143
+74
+249
+146
+83
+249
+146
+83
+249
+146
+83
+249
+146
+83
+249
+146
+83
+247
+143
+74
+247
+143
+74
+250
+139
+73
+250
+139
+73
+248
+138
+64
+247
+130
+60
+247
+130
+53
+247
+130
+53
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+130
+53
+247
+130
+60
+250
+139
+73
+247
+143
+74
+249
+146
+83
+249
+146
+83
+249
+146
+83
+249
+146
+83
+249
+146
+83
+247
+143
+74
+247
+143
+74
+247
+143
+74
+247
+143
+74
+247
+150
+84
+249
+159
+103
+249
+174
+124
+252
+185
+144
+250
+200
+166
+217
+187
+166
+48
+58
+59
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+63
+69
+60
+137
+127
+115
+251
+192
+154
+249
+174
+124
+246
+156
+93
+247
+143
+74
+248
+138
+64
+247
+130
+60
+247
+130
+60
+248
+138
+64
+250
+139
+73
+247
+143
+74
+249
+146
+83
+247
+150
+84
+249
+146
+83
+249
+146
+83
+247
+143
+74
+248
+138
+64
+247
+130
+60
+247
+130
+53
+247
+130
+53
+247
+130
+60
+250
+139
+73
+247
+150
+84
+251
+168
+115
+249
+189
+146
+161
+144
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+234
+125
+52
+173
+106
+60
+48
+58
+59
+187
+166
+150
+253
+212
+188
+250
+197
+158
+248
+180
+134
+251
+168
+115
+249
+159
+103
+247
+150
+84
+247
+143
+74
+250
+139
+73
+248
+138
+64
+247
+130
+53
+247
+123
+41
+247
+118
+39
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+118
+39
+247
+123
+41
+247
+130
+53
+248
+138
+64
+250
+139
+73
+247
+143
+74
+249
+146
+83
+247
+150
+84
+247
+150
+84
+249
+146
+83
+247
+143
+74
+250
+139
+73
+247
+130
+60
+247
+130
+53
+247
+123
+41
+247
+118
+39
+247
+111
+26
+247
+111
+26
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+118
+39
+247
+123
+41
+247
+130
+53
+247
+130
+60
+248
+138
+64
+247
+143
+74
+249
+146
+83
+249
+146
+83
+249
+146
+83
+249
+146
+83
+249
+146
+83
+247
+143
+74
+247
+143
+74
+247
+143
+74
+250
+139
+73
+250
+139
+73
+250
+139
+73
+248
+138
+64
+248
+138
+64
+248
+138
+64
+248
+138
+64
+248
+138
+64
+248
+138
+64
+250
+139
+73
+250
+139
+73
+250
+139
+73
+250
+139
+73
+247
+143
+74
+247
+143
+74
+250
+139
+73
+250
+139
+73
+248
+138
+64
+248
+138
+64
+247
+130
+60
+247
+130
+60
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+60
+247
+130
+60
+248
+138
+64
+250
+139
+73
+247
+143
+74
+247
+150
+84
+249
+159
+103
+251
+168
+115
+248
+180
+134
+250
+197
+158
+253
+212
+188
+207
+178
+158
+51
+62
+63
+155
+100
+63
+234
+125
+52
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+249
+189
+146
+247
+165
+111
+247
+143
+74
+247
+130
+53
+246
+116
+28
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+118
+39
+247
+123
+41
+247
+130
+53
+247
+130
+60
+250
+139
+73
+247
+143
+74
+249
+146
+83
+247
+150
+84
+247
+150
+84
+249
+146
+83
+247
+143
+74
+250
+139
+73
+248
+138
+64
+247
+130
+53
+247
+123
+41
+247
+123
+41
+247
+118
+39
+247
+118
+39
+247
+118
+39
+247
+123
+41
+247
+123
+41
+247
+130
+53
+247
+130
+53
+248
+138
+64
+248
+138
+64
+250
+139
+73
+250
+139
+73
+247
+143
+74
+247
+143
+74
+250
+139
+73
+250
+139
+73
+248
+138
+64
+247
+130
+60
+247
+130
+60
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+60
+248
+138
+64
+250
+139
+73
+247
+143
+74
+249
+146
+83
+249
+146
+83
+249
+146
+83
+249
+146
+83
+249
+146
+83
+247
+143
+74
+247
+143
+74
+250
+139
+73
+250
+139
+73
+248
+138
+64
+247
+130
+60
+247
+130
+53
+247
+123
+41
+247
+123
+41
+246
+116
+28
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+111
+26
+247
+118
+39
+247
+130
+53
+247
+143
+74
+249
+159
+103
+252
+185
+144
+139
+115
+96
+35
+31
+30
+129
+106
+52
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+117
+98
+55
+35
+31
+30
+152
+119
+47
+168
+127
+42
+168
+127
+42
+160
+120
+43
+168
+127
+42
+171
+129
+45
+152
+119
+47
+216
+194
+154
+224
+207
+180
+160
+120
+43
+160
+120
+43
+137
+110
+49
+102
+91
+75
+35
+31
+30
+115
+102
+92
+250
+200
+166
+250
+176
+132
+249
+159
+103
+249
+146
+83
+247
+130
+60
+247
+123
+41
+246
+116
+28
+247
+111
+26
+246
+116
+28
+247
+123
+41
+248
+138
+64
+249
+152
+92
+249
+174
+124
+236
+186
+153
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+91
+92
+89
+255
+215
+190
+255
+215
+190
+253
+204
+176
+250
+197
+158
+252
+185
+144
+249
+174
+124
+251
+168
+115
+249
+159
+103
+246
+156
+93
+247
+150
+84
+250
+139
+73
+247
+130
+60
+247
+130
+53
+247
+123
+41
+247
+118
+39
+246
+116
+28
+246
+116
+28
+247
+118
+39
+247
+123
+41
+247
+130
+53
+248
+138
+64
+249
+146
+83
+249
+152
+92
+249
+159
+103
+247
+165
+111
+251
+168
+115
+251
+168
+115
+251
+168
+115
+251
+168
+115
+247
+165
+111
+249
+159
+103
+247
+150
+84
+247
+143
+74
+248
+138
+64
+247
+130
+53
+247
+123
+41
+247
+118
+39
+246
+116
+28
+246
+116
+28
+246
+116
+28
+247
+118
+39
+247
+123
+41
+247
+130
+60
+250
+139
+73
+249
+146
+83
+249
+152
+92
+249
+159
+103
+247
+165
+111
+251
+168
+115
+251
+168
+115
+251
+168
+115
+251
+168
+115
+247
+165
+111
+247
+165
+111
+247
+165
+111
+249
+159
+103
+249
+159
+103
+246
+156
+93
+247
+150
+84
+249
+146
+83
+247
+143
+74
+248
+138
+64
+247
+130
+60
+247
+130
+60
+247
+130
+60
+248
+138
+64
+250
+139
+73
+249
+146
+83
+249
+152
+92
+249
+159
+103
+249
+159
+103
+247
+165
+111
+251
+168
+115
+251
+168
+115
+251
+168
+115
+251
+168
+115
+247
+165
+111
+247
+165
+111
+249
+159
+103
+247
+165
+111
+251
+168
+115
+250
+176
+132
+252
+185
+144
+250
+200
+166
+255
+215
+190
+217
+187
+166
+48
+58
+59
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+65
+67
+64
+137
+127
+115
+250
+200
+166
+250
+176
+132
+247
+165
+111
+249
+152
+92
+247
+150
+84
+249
+146
+83
+247
+150
+84
+249
+152
+92
+249
+159
+103
+247
+165
+111
+251
+168
+115
+251
+168
+115
+251
+168
+115
+247
+165
+111
+249
+159
+103
+246
+156
+93
+247
+150
+84
+247
+143
+74
+250
+139
+73
+247
+143
+74
+249
+146
+83
+249
+159
+103
+249
+174
+124
+251
+192
+154
+161
+144
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+227
+126
+50
+173
+106
+60
+51
+62
+63
+187
+166
+150
+255
+215
+190
+253
+212
+188
+250
+200
+166
+249
+189
+146
+248
+180
+134
+249
+174
+124
+247
+165
+111
+249
+159
+103
+249
+152
+92
+247
+143
+74
+248
+138
+64
+247
+130
+53
+247
+123
+41
+247
+118
+39
+246
+116
+28
+247
+111
+26
+246
+116
+28
+247
+118
+39
+247
+123
+41
+247
+130
+53
+248
+138
+64
+247
+143
+74
+249
+152
+92
+249
+159
+103
+247
+165
+111
+251
+168
+115
+251
+168
+115
+251
+168
+115
+251
+168
+115
+247
+165
+111
+249
+159
+103
+249
+152
+92
+247
+143
+74
+248
+138
+64
+247
+130
+53
+247
+123
+41
+247
+118
+39
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+116
+28
+247
+123
+41
+247
+130
+53
+248
+138
+64
+247
+143
+74
+247
+150
+84
+249
+159
+103
+249
+159
+103
+247
+165
+111
+251
+168
+115
+251
+168
+115
+251
+168
+115
+251
+168
+115
+247
+165
+111
+247
+165
+111
+249
+159
+103
+249
+159
+103
+249
+159
+103
+249
+159
+103
+249
+159
+103
+249
+159
+103
+246
+156
+93
+246
+156
+93
+246
+156
+93
+249
+159
+103
+249
+159
+103
+249
+159
+103
+249
+159
+103
+249
+159
+103
+249
+159
+103
+249
+159
+103
+249
+159
+103
+249
+159
+103
+249
+159
+103
+249
+152
+92
+249
+152
+92
+247
+150
+84
+249
+146
+83
+249
+146
+83
+249
+146
+83
+247
+150
+84
+249
+152
+92
+246
+156
+93
+249
+159
+103
+247
+165
+111
+249
+174
+124
+250
+176
+132
+249
+189
+146
+250
+200
+166
+253
+212
+188
+255
+215
+190
+207
+178
+158
+51
+62
+63
+155
+100
+63
+234
+125
+52
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+249
+189
+146
+247
+165
+111
+247
+143
+74
+247
+130
+53
+246
+116
+28
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+109
+10
+247
+111
+26
+246
+116
+28
+247
+123
+41
+247
+130
+53
+248
+138
+64
+247
+143
+74
+247
+150
+84
+249
+159
+103
+247
+165
+111
+251
+168
+115
+251
+168
+115
+251
+168
+115
+251
+168
+115
+247
+165
+111
+249
+159
+103
+249
+152
+92
+249
+146
+83
+250
+139
+73
+247
+130
+60
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+60
+248
+138
+64
+247
+143
+74
+249
+146
+83
+249
+152
+92
+246
+156
+93
+249
+159
+103
+249
+159
+103
+249
+159
+103
+249
+159
+103
+249
+159
+103
+249
+159
+103
+246
+156
+93
+249
+152
+92
+247
+150
+84
+249
+146
+83
+247
+143
+74
+247
+143
+74
+247
+143
+74
+249
+146
+83
+247
+150
+84
+246
+156
+93
+249
+159
+103
+247
+165
+111
+247
+165
+111
+251
+168
+115
+251
+168
+115
+251
+168
+115
+247
+165
+111
+247
+165
+111
+247
+165
+111
+249
+159
+103
+249
+159
+103
+246
+156
+93
+247
+150
+84
+247
+143
+74
+248
+138
+64
+247
+130
+53
+247
+123
+41
+247
+118
+39
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+123
+41
+248
+138
+64
+249
+152
+92
+249
+174
+124
+236
+186
+153
+47
+40
+38
+59
+50
+39
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+47
+40
+38
+108
+87
+46
+168
+127
+42
+111
+94
+57
+76
+70
+64
+59
+50
+39
+101
+83
+47
+160
+120
+43
+170
+137
+67
+253
+255
+252
+195
+167
+113
+145
+114
+49
+69
+69
+61
+120
+114
+108
+35
+31
+30
+47
+40
+38
+217
+187
+166
+250
+197
+158
+250
+176
+132
+249
+159
+103
+249
+146
+83
+248
+138
+64
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+130
+53
+250
+139
+73
+246
+156
+93
+250
+176
+132
+232
+190
+161
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+91
+92
+89
+255
+215
+190
+255
+215
+190
+245
+212
+186
+227
+196
+175
+212
+173
+150
+209
+171
+139
+219
+170
+138
+240
+181
+138
+250
+176
+132
+251
+168
+115
+249
+159
+103
+247
+150
+84
+250
+139
+73
+247
+130
+60
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+248
+138
+64
+249
+146
+83
+246
+156
+93
+247
+165
+111
+249
+174
+124
+248
+180
+134
+240
+181
+138
+219
+170
+138
+203
+161
+131
+203
+161
+131
+219
+170
+138
+240
+181
+138
+250
+176
+132
+249
+174
+124
+249
+159
+103
+249
+152
+92
+247
+143
+74
+247
+130
+60
+247
+130
+53
+247
+123
+41
+247
+123
+41
+247
+130
+53
+247
+130
+53
+248
+138
+64
+249
+146
+83
+246
+156
+93
+247
+165
+111
+249
+174
+124
+245
+179
+138
+230
+173
+136
+203
+161
+131
+203
+161
+131
+219
+170
+138
+239
+182
+144
+251
+192
+154
+249
+189
+146
+252
+185
+144
+252
+185
+144
+248
+180
+134
+245
+169
+119
+234
+168
+124
+247
+165
+111
+249
+159
+103
+249
+152
+92
+247
+150
+84
+247
+150
+84
+247
+150
+84
+249
+152
+92
+249
+159
+103
+247
+165
+111
+249
+174
+124
+248
+180
+134
+230
+173
+136
+219
+170
+138
+203
+161
+131
+209
+171
+139
+239
+182
+144
+251
+192
+154
+249
+189
+146
+249
+189
+146
+252
+185
+144
+252
+185
+144
+249
+189
+146
+236
+186
+153
+250
+200
+166
+255
+215
+190
+255
+215
+190
+217
+187
+166
+48
+58
+59
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+65
+67
+64
+137
+127
+115
+253
+204
+176
+252
+185
+144
+249
+174
+124
+247
+165
+111
+247
+165
+111
+247
+165
+111
+251
+168
+115
+249
+174
+124
+248
+180
+134
+230
+173
+136
+219
+170
+138
+203
+161
+131
+209
+171
+139
+230
+173
+136
+245
+179
+138
+250
+176
+132
+251
+168
+115
+249
+159
+103
+249
+159
+103
+246
+156
+93
+249
+159
+103
+251
+168
+115
+248
+180
+134
+250
+197
+158
+161
+144
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+227
+126
+50
+173
+106
+60
+51
+62
+63
+187
+166
+150
+255
+215
+190
+255
+215
+190
+234
+204
+183
+207
+178
+158
+209
+171
+139
+209
+171
+139
+230
+173
+136
+248
+180
+134
+249
+174
+124
+247
+165
+111
+249
+152
+92
+247
+143
+74
+248
+138
+64
+247
+130
+53
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+130
+53
+248
+138
+64
+247
+143
+74
+249
+152
+92
+247
+165
+111
+249
+174
+124
+248
+180
+134
+240
+181
+138
+219
+170
+138
+203
+161
+131
+203
+161
+131
+219
+170
+138
+240
+181
+138
+248
+180
+134
+249
+174
+124
+247
+165
+111
+249
+152
+92
+247
+143
+74
+248
+138
+64
+247
+130
+53
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+130
+53
+247
+130
+60
+247
+143
+74
+249
+152
+92
+249
+159
+103
+249
+174
+124
+250
+176
+132
+240
+181
+138
+219
+170
+138
+203
+161
+131
+203
+161
+131
+230
+173
+136
+251
+192
+154
+249
+189
+146
+249
+189
+146
+252
+185
+144
+252
+185
+144
+248
+180
+134
+234
+168
+124
+250
+176
+132
+248
+180
+134
+250
+176
+132
+250
+176
+132
+250
+176
+132
+248
+180
+134
+248
+180
+134
+230
+173
+136
+240
+181
+138
+252
+185
+144
+252
+185
+144
+252
+185
+144
+252
+185
+144
+248
+180
+134
+234
+168
+124
+234
+168
+124
+249
+174
+124
+251
+168
+115
+247
+165
+111
+247
+165
+111
+247
+165
+111
+251
+168
+115
+249
+174
+124
+250
+176
+132
+248
+180
+134
+230
+173
+136
+219
+170
+138
+209
+171
+139
+207
+178
+158
+227
+196
+175
+253
+212
+188
+255
+215
+190
+217
+187
+166
+51
+62
+63
+155
+100
+63
+234
+125
+52
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+249
+189
+146
+247
+165
+111
+247
+143
+74
+247
+130
+53
+246
+116
+28
+247
+111
+26
+246
+109
+10
+246
+109
+10
+247
+111
+26
+246
+116
+28
+247
+123
+41
+247
+130
+60
+247
+143
+74
+249
+152
+92
+249
+159
+103
+249
+174
+124
+248
+180
+134
+240
+181
+138
+219
+170
+138
+203
+161
+131
+203
+161
+131
+219
+170
+138
+240
+181
+138
+248
+180
+134
+249
+174
+124
+247
+165
+111
+249
+159
+103
+247
+150
+84
+249
+146
+83
+247
+143
+74
+247
+143
+74
+249
+146
+83
+249
+152
+92
+249
+159
+103
+247
+165
+111
+234
+168
+124
+234
+168
+124
+248
+180
+134
+252
+185
+144
+252
+185
+144
+252
+185
+144
+248
+180
+134
+250
+176
+132
+234
+168
+124
+249
+174
+124
+251
+168
+115
+247
+165
+111
+247
+165
+111
+249
+159
+103
+247
+165
+111
+251
+168
+115
+249
+174
+124
+250
+176
+132
+248
+180
+134
+230
+173
+136
+203
+161
+131
+203
+161
+131
+219
+170
+138
+239
+182
+144
+251
+192
+154
+249
+189
+146
+252
+185
+144
+252
+185
+144
+248
+180
+134
+234
+168
+124
+238
+159
+107
+247
+165
+111
+249
+152
+92
+247
+143
+74
+247
+130
+60
+247
+123
+41
+246
+116
+28
+247
+111
+26
+246
+109
+10
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+111
+26
+246
+116
+28
+247
+130
+53
+247
+143
+74
+247
+165
+111
+252
+185
+144
+154
+133
+118
+24
+22
+23
+108
+87
+46
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+71
+60
+43
+85
+71
+43
+101
+83
+47
+89
+84
+82
+152
+147
+147
+24
+22
+23
+24
+22
+23
+108
+87
+46
+168
+127
+42
+224
+207
+180
+253
+255
+252
+209
+171
+139
+101
+83
+47
+24
+22
+23
+35
+31
+30
+35
+31
+30
+167
+142
+123
+253
+212
+188
+250
+197
+158
+248
+180
+134
+247
+165
+111
+247
+150
+84
+250
+139
+73
+247
+130
+60
+247
+130
+60
+248
+138
+64
+249
+146
+83
+249
+159
+103
+250
+176
+132
+232
+190
+161
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+97
+98
+96
+217
+187
+166
+137
+127
+115
+91
+92
+89
+55
+66
+67
+48
+58
+59
+48
+58
+59
+55
+66
+67
+84
+85
+82
+133
+120
+107
+209
+171
+139
+248
+180
+134
+251
+168
+115
+249
+159
+103
+247
+150
+84
+247
+143
+74
+250
+139
+73
+250
+139
+73
+249
+146
+83
+249
+152
+92
+247
+165
+111
+249
+174
+124
+245
+179
+138
+178
+146
+122
+124
+111
+99
+76
+78
+76
+51
+62
+63
+48
+58
+59
+48
+58
+59
+58
+69
+70
+91
+92
+89
+144
+125
+110
+203
+161
+131
+248
+180
+134
+249
+174
+124
+249
+159
+103
+247
+150
+84
+247
+143
+74
+248
+138
+64
+248
+138
+64
+250
+139
+73
+249
+146
+83
+246
+156
+93
+247
+165
+111
+250
+176
+132
+230
+173
+136
+154
+133
+118
+101
+100
+92
+58
+69
+70
+48
+58
+59
+48
+58
+59
+51
+62
+63
+84
+85
+82
+137
+127
+115
+217
+187
+166
+253
+212
+188
+227
+196
+175
+144
+125
+110
+89
+84
+82
+81
+77
+76
+115
+102
+92
+210
+156
+119
+249
+174
+124
+251
+168
+115
+251
+168
+115
+251
+168
+115
+249
+174
+124
+250
+176
+132
+252
+185
+144
+195
+157
+134
+124
+111
+99
+76
+78
+76
+51
+62
+63
+48
+58
+59
+48
+58
+59
+70
+79
+77
+120
+114
+108
+187
+166
+150
+253
+212
+188
+253
+212
+188
+172
+150
+134
+101
+100
+92
+77
+85
+81
+101
+100
+92
+176
+156
+141
+255
+215
+190
+217
+187
+166
+48
+58
+59
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+63
+69
+60
+137
+127
+115
+253
+212
+188
+250
+197
+158
+252
+185
+144
+248
+180
+134
+248
+180
+134
+252
+185
+144
+239
+182
+144
+167
+142
+123
+109
+106
+99
+70
+79
+77
+48
+58
+59
+48
+58
+59
+48
+58
+59
+58
+69
+70
+91
+92
+89
+150
+125
+114
+219
+170
+138
+248
+180
+134
+249
+174
+124
+249
+174
+124
+249
+174
+124
+250
+176
+132
+249
+189
+146
+253
+204
+176
+161
+144
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+234
+125
+52
+183
+110
+59
+51
+62
+63
+176
+156
+141
+187
+166
+150
+109
+106
+99
+63
+74
+74
+43
+57
+62
+43
+57
+62
+43
+57
+62
+63
+74
+74
+109
+106
+99
+178
+146
+122
+245
+179
+138
+249
+174
+124
+249
+159
+103
+247
+150
+84
+247
+143
+74
+248
+138
+64
+248
+138
+64
+248
+138
+64
+247
+143
+74
+247
+150
+84
+249
+159
+103
+249
+174
+124
+252
+185
+144
+195
+157
+134
+124
+111
+99
+77
+85
+81
+51
+62
+63
+41
+58
+57
+43
+57
+62
+51
+62
+63
+77
+85
+81
+124
+111
+99
+195
+157
+134
+252
+185
+144
+249
+174
+124
+249
+159
+103
+247
+150
+84
+247
+143
+74
+248
+138
+64
+247
+130
+60
+248
+138
+64
+250
+139
+73
+247
+150
+84
+249
+159
+103
+251
+168
+115
+248
+180
+134
+203
+161
+131
+124
+111
+99
+77
+85
+81
+48
+58
+59
+43
+57
+62
+43
+57
+62
+63
+74
+74
+109
+106
+99
+187
+166
+150
+253
+212
+188
+253
+212
+188
+187
+166
+150
+109
+106
+99
+77
+85
+81
+84
+85
+82
+150
+125
+114
+232
+190
+161
+253
+204
+176
+253
+204
+176
+172
+150
+134
+101
+100
+92
+77
+85
+81
+91
+92
+89
+137
+127
+115
+227
+196
+175
+253
+212
+188
+186
+157
+134
+109
+106
+99
+77
+85
+81
+84
+85
+82
+124
+111
+99
+219
+170
+138
+249
+189
+146
+249
+189
+146
+249
+189
+146
+251
+192
+154
+250
+197
+158
+186
+157
+134
+109
+106
+99
+70
+79
+77
+43
+57
+62
+43
+57
+62
+41
+58
+57
+63
+74
+74
+101
+100
+92
+176
+156
+141
+194
+173
+157
+55
+66
+67
+155
+100
+63
+234
+125
+52
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+249
+189
+146
+247
+165
+111
+247
+143
+74
+247
+130
+53
+247
+118
+39
+247
+111
+26
+246
+109
+10
+247
+111
+26
+246
+116
+28
+247
+123
+41
+247
+130
+60
+249
+146
+83
+249
+159
+103
+249
+174
+124
+252
+185
+144
+203
+161
+131
+133
+120
+107
+84
+85
+82
+55
+66
+67
+43
+57
+62
+41
+58
+57
+51
+62
+63
+77
+85
+81
+124
+111
+99
+178
+146
+122
+239
+182
+144
+250
+176
+132
+249
+174
+124
+247
+165
+111
+249
+159
+103
+249
+159
+103
+247
+165
+111
+249
+174
+124
+210
+156
+119
+124
+111
+99
+77
+85
+81
+77
+85
+81
+109
+106
+99
+194
+173
+157
+253
+212
+188
+217
+187
+166
+133
+120
+107
+89
+84
+82
+76
+78
+76
+101
+100
+92
+178
+146
+122
+249
+189
+146
+252
+185
+144
+252
+185
+144
+252
+185
+144
+251
+192
+154
+236
+186
+153
+167
+142
+123
+101
+100
+92
+63
+74
+74
+41
+58
+57
+43
+57
+62
+51
+62
+63
+77
+85
+81
+137
+127
+115
+217
+187
+166
+253
+212
+188
+227
+196
+175
+144
+125
+110
+84
+85
+82
+76
+78
+76
+115
+102
+92
+204
+141
+99
+249
+159
+103
+247
+143
+74
+247
+130
+60
+247
+123
+41
+247
+111
+26
+246
+109
+10
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+123
+41
+248
+138
+64
+249
+152
+92
+249
+174
+124
+250
+197
+158
+82
+69
+65
+47
+40
+38
+152
+119
+47
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+101
+83
+47
+59
+50
+39
+101
+83
+47
+24
+22
+23
+35
+31
+30
+24
+22
+23
+24
+22
+23
+108
+87
+46
+168
+127
+42
+195
+167
+113
+253
+255
+252
+253
+255
+252
+239
+227
+208
+186
+157
+134
+162
+125
+96
+105
+93
+60
+47
+40
+38
+150
+125
+114
+217
+187
+166
+250
+200
+166
+252
+185
+144
+251
+168
+115
+246
+156
+93
+249
+146
+83
+247
+143
+74
+249
+146
+83
+249
+152
+92
+247
+165
+111
+252
+185
+144
+232
+190
+161
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+55
+66
+67
+58
+69
+70
+56
+64
+60
+83
+78
+61
+105
+93
+60
+117
+98
+55
+117
+98
+55
+105
+93
+60
+83
+78
+61
+56
+64
+60
+55
+66
+67
+144
+125
+110
+239
+182
+144
+250
+176
+132
+247
+165
+111
+249
+159
+103
+246
+156
+93
+249
+159
+103
+247
+165
+111
+249
+174
+124
+252
+185
+144
+195
+157
+134
+89
+84
+82
+48
+58
+59
+63
+69
+60
+95
+87
+59
+111
+94
+57
+123
+102
+54
+117
+98
+55
+105
+93
+60
+83
+78
+61
+56
+64
+60
+51
+62
+63
+124
+111
+99
+219
+170
+138
+248
+180
+134
+251
+168
+115
+249
+159
+103
+249
+152
+92
+249
+152
+92
+246
+156
+93
+247
+165
+111
+249
+174
+124
+252
+185
+144
+167
+142
+123
+70
+79
+77
+51
+62
+63
+75
+74
+61
+100
+89
+56
+117
+98
+55
+123
+102
+54
+105
+93
+60
+83
+78
+61
+51
+62
+63
+63
+74
+74
+172
+150
+134
+109
+106
+99
+51
+62
+63
+83
+78
+61
+95
+87
+59
+65
+67
+64
+65
+67
+64
+209
+171
+139
+249
+189
+146
+249
+189
+146
+249
+189
+146
+250
+197
+158
+212
+173
+150
+109
+106
+99
+48
+58
+59
+63
+69
+60
+95
+87
+59
+111
+94
+57
+123
+102
+54
+117
+98
+55
+95
+87
+59
+62
+63
+61
+48
+58
+59
+137
+127
+115
+146
+135
+124
+48
+58
+59
+75
+74
+61
+95
+87
+59
+75
+74
+61
+48
+58
+59
+161
+144
+134
+217
+187
+166
+48
+58
+59
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+63
+69
+60
+137
+127
+115
+255
+215
+190
+251
+209
+178
+250
+200
+166
+250
+200
+166
+250
+200
+166
+172
+150
+134
+77
+85
+81
+48
+58
+59
+69
+69
+61
+95
+87
+59
+111
+94
+57
+123
+102
+54
+117
+98
+55
+100
+89
+56
+75
+74
+61
+56
+64
+60
+55
+66
+67
+133
+120
+107
+236
+186
+153
+251
+192
+154
+249
+189
+146
+251
+192
+154
+250
+200
+166
+253
+212
+188
+161
+144
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+227
+126
+50
+173
+106
+60
+51
+62
+63
+63
+74
+74
+48
+58
+59
+76
+70
+64
+118
+86
+65
+146
+97
+64
+155
+100
+63
+146
+97
+64
+118
+86
+65
+76
+70
+64
+43
+57
+62
+91
+92
+89
+203
+161
+131
+248
+180
+134
+251
+168
+115
+249
+159
+103
+249
+152
+92
+247
+150
+84
+249
+152
+92
+249
+159
+103
+251
+168
+115
+248
+180
+134
+209
+171
+139
+101
+100
+92
+43
+57
+62
+69
+69
+61
+106
+82
+65
+135
+94
+64
+155
+100
+63
+155
+100
+63
+135
+94
+64
+106
+82
+65
+65
+67
+64
+43
+57
+62
+101
+100
+92
+209
+171
+139
+248
+180
+134
+251
+168
+115
+249
+159
+103
+249
+152
+92
+247
+150
+84
+247
+150
+84
+246
+156
+93
+247
+165
+111
+250
+176
+132
+219
+170
+138
+124
+111
+99
+48
+58
+59
+62
+63
+61
+106
+82
+65
+139
+96
+61
+155
+100
+63
+146
+97
+64
+125
+90
+64
+76
+70
+64
+41
+58
+57
+120
+114
+108
+172
+150
+134
+51
+62
+63
+69
+69
+61
+112
+85
+63
+95
+78
+64
+51
+62
+63
+120
+114
+108
+245
+212
+186
+146
+135
+124
+43
+57
+62
+81
+73
+62
+118
+86
+65
+95
+78
+64
+56
+64
+60
+101
+100
+92
+133
+120
+107
+43
+57
+62
+76
+70
+64
+112
+85
+63
+106
+82
+65
+62
+63
+61
+77
+85
+81
+227
+196
+175
+253
+212
+188
+253
+212
+188
+217
+187
+166
+109
+106
+99
+41
+58
+57
+69
+69
+61
+112
+85
+63
+139
+96
+61
+155
+100
+63
+146
+97
+64
+118
+86
+65
+81
+73
+62
+48
+58
+59
+58
+69
+70
+51
+62
+63
+155
+100
+63
+234
+125
+52
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+251
+192
+154
+247
+165
+111
+249
+146
+83
+247
+130
+53
+247
+118
+39
+247
+111
+26
+247
+111
+26
+246
+116
+28
+247
+123
+41
+248
+138
+64
+249
+146
+83
+249
+159
+103
+250
+176
+132
+219
+170
+138
+124
+111
+99
+43
+57
+62
+62
+63
+61
+106
+82
+65
+135
+94
+64
+155
+100
+63
+155
+100
+63
+139
+96
+61
+106
+82
+65
+69
+69
+61
+43
+57
+62
+91
+92
+89
+195
+157
+134
+251
+192
+154
+252
+185
+144
+248
+180
+134
+248
+180
+134
+252
+185
+144
+203
+161
+131
+63
+74
+74
+62
+63
+61
+106
+82
+65
+112
+85
+63
+69
+69
+61
+55
+66
+67
+146
+135
+124
+63
+74
+74
+56
+64
+60
+95
+78
+64
+112
+85
+63
+76
+70
+64
+48
+58
+59
+172
+150
+134
+253
+204
+176
+251
+209
+178
+251
+209
+178
+187
+166
+150
+77
+85
+81
+48
+58
+59
+81
+73
+62
+125
+90
+64
+146
+97
+64
+155
+100
+63
+139
+96
+61
+95
+78
+64
+56
+64
+60
+58
+69
+70
+161
+144
+134
+109
+106
+99
+51
+62
+63
+95
+78
+64
+112
+85
+63
+65
+67
+64
+65
+67
+64
+204
+141
+99
+246
+156
+93
+250
+139
+73
+247
+130
+53
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+246
+116
+28
+247
+130
+53
+247
+143
+74
+249
+159
+103
+252
+185
+144
+209
+171
+139
+24
+22
+23
+85
+71
+43
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+137
+110
+49
+47
+40
+38
+137
+110
+49
+101
+83
+47
+59
+50
+39
+59
+50
+39
+101
+83
+47
+158
+125
+46
+160
+120
+43
+192
+155
+91
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+237
+233
+225
+152
+147
+147
+81
+77
+76
+55
+48
+48
+115
+102
+92
+212
+173
+150
+251
+192
+154
+249
+174
+124
+247
+165
+111
+249
+159
+103
+249
+159
+103
+247
+165
+111
+249
+174
+124
+249
+189
+146
+238
+205
+179
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+43
+57
+62
+95
+87
+59
+145
+114
+49
+168
+127
+42
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+168
+127
+42
+145
+114
+49
+95
+87
+59
+48
+58
+59
+109
+106
+99
+236
+186
+153
+252
+185
+144
+248
+180
+134
+250
+176
+132
+250
+176
+132
+252
+185
+144
+251
+192
+154
+150
+125
+114
+48
+58
+59
+69
+69
+61
+117
+98
+55
+158
+125
+46
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+168
+127
+42
+152
+119
+47
+100
+89
+56
+56
+64
+60
+63
+74
+74
+186
+157
+134
+249
+189
+146
+248
+180
+134
+249
+174
+124
+249
+174
+124
+250
+176
+132
+252
+185
+144
+251
+192
+154
+133
+120
+107
+48
+58
+59
+75
+74
+61
+137
+110
+49
+168
+127
+42
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+145
+114
+49
+75
+74
+61
+43
+57
+62
+51
+62
+63
+123
+102
+54
+171
+129
+45
+171
+129
+45
+145
+114
+49
+56
+64
+60
+133
+120
+107
+253
+212
+188
+251
+209
+178
+253
+212
+188
+194
+173
+157
+63
+74
+74
+56
+64
+60
+111
+94
+57
+158
+125
+46
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+158
+125
+46
+105
+93
+60
+51
+62
+63
+43
+57
+62
+88
+82
+59
+168
+127
+42
+171
+129
+45
+168
+127
+42
+88
+82
+59
+63
+74
+74
+187
+166
+150
+55
+66
+67
+111
+94
+57
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+63
+69
+60
+137
+127
+115
+255
+215
+190
+255
+215
+190
+255
+215
+190
+245
+212
+186
+133
+120
+107
+48
+58
+59
+75
+74
+61
+129
+106
+52
+158
+125
+46
+171
+129
+45
+171
+129
+45
+171
+129
+45
+168
+127
+42
+171
+129
+45
+168
+127
+42
+145
+114
+49
+95
+87
+59
+51
+62
+63
+77
+85
+81
+212
+173
+150
+253
+204
+176
+253
+204
+176
+251
+209
+178
+255
+215
+190
+161
+144
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+227
+126
+50
+183
+110
+59
+41
+58
+57
+69
+69
+61
+155
+100
+63
+214
+121
+50
+234
+126
+45
+234
+126
+45
+234
+126
+45
+234
+126
+45
+234
+126
+45
+224
+123
+55
+155
+100
+63
+69
+69
+61
+51
+62
+63
+178
+146
+122
+249
+189
+146
+250
+176
+132
+251
+168
+115
+251
+168
+115
+249
+174
+124
+250
+176
+132
+249
+189
+146
+167
+142
+123
+55
+66
+67
+65
+67
+64
+146
+97
+64
+212
+120
+56
+234
+126
+45
+234
+125
+52
+234
+126
+45
+234
+125
+52
+234
+126
+45
+234
+125
+52
+209
+117
+53
+146
+97
+64
+65
+67
+64
+55
+66
+67
+178
+146
+122
+249
+189
+146
+250
+176
+132
+251
+168
+115
+247
+165
+111
+251
+168
+115
+249
+174
+124
+252
+185
+144
+203
+161
+131
+63
+74
+74
+56
+64
+60
+125
+90
+64
+209
+117
+53
+234
+126
+45
+234
+126
+45
+234
+125
+52
+234
+126
+45
+234
+126
+45
+214
+121
+50
+146
+97
+64
+56
+64
+60
+41
+58
+57
+81
+73
+62
+209
+117
+53
+234
+126
+45
+234
+126
+45
+125
+90
+64
+51
+62
+63
+176
+156
+141
+55
+66
+67
+106
+82
+65
+225
+124
+48
+234
+126
+45
+234
+126
+45
+146
+97
+64
+41
+58
+57
+43
+57
+62
+125
+90
+64
+214
+121
+50
+234
+126
+45
+234
+126
+45
+183
+110
+59
+56
+64
+60
+137
+127
+115
+255
+215
+190
+194
+173
+157
+63
+74
+74
+62
+63
+61
+146
+97
+64
+214
+121
+50
+234
+125
+52
+234
+126
+45
+234
+125
+52
+234
+125
+52
+234
+126
+45
+225
+124
+48
+173
+106
+60
+81
+73
+62
+35
+56
+60
+155
+100
+63
+234
+125
+52
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+251
+192
+154
+247
+165
+111
+249
+146
+83
+247
+130
+53
+247
+118
+39
+246
+116
+28
+246
+116
+28
+247
+123
+41
+247
+130
+60
+249
+146
+83
+247
+165
+111
+248
+180
+134
+186
+157
+134
+58
+69
+70
+56
+64
+60
+135
+94
+64
+199
+115
+54
+234
+125
+52
+234
+126
+45
+234
+125
+52
+234
+125
+52
+234
+126
+45
+234
+125
+52
+212
+120
+56
+155
+100
+63
+76
+70
+64
+51
+62
+63
+146
+135
+124
+251
+209
+178
+253
+204
+176
+250
+200
+166
+253
+204
+176
+101
+100
+92
+69
+69
+61
+194
+112
+58
+234
+126
+45
+234
+126
+45
+199
+115
+54
+65
+67
+64
+35
+56
+60
+81
+73
+62
+194
+112
+58
+234
+125
+52
+234
+126
+45
+214
+121
+50
+95
+78
+64
+63
+74
+74
+238
+205
+179
+255
+215
+190
+161
+144
+134
+43
+57
+62
+81
+73
+62
+173
+106
+60
+225
+124
+48
+234
+126
+45
+234
+126
+45
+234
+125
+52
+234
+126
+45
+234
+126
+45
+194
+112
+58
+95
+78
+64
+41
+58
+57
+48
+58
+59
+155
+100
+63
+234
+126
+45
+234
+126
+45
+199
+115
+54
+69
+69
+61
+99
+90
+79
+251
+168
+115
+247
+150
+84
+247
+130
+60
+247
+123
+41
+247
+111
+26
+246
+109
+10
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+111
+26
+247
+118
+39
+247
+130
+60
+247
+150
+84
+249
+174
+124
+251
+192
+154
+124
+111
+99
+35
+31
+30
+137
+110
+49
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+47
+40
+38
+108
+87
+46
+175
+132
+40
+161
+127
+40
+168
+127
+42
+171
+129
+45
+158
+125
+46
+152
+119
+47
+203
+161
+131
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+186
+181
+179
+89
+84
+82
+47
+40
+38
+139
+115
+96
+236
+186
+153
+252
+185
+144
+250
+176
+132
+249
+174
+124
+250
+176
+132
+252
+185
+144
+250
+197
+158
+238
+205
+179
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+111
+94
+57
+171
+129
+45
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+171
+129
+45
+111
+94
+57
+48
+58
+59
+109
+106
+99
+253
+204
+176
+250
+200
+166
+250
+200
+166
+250
+200
+166
+253
+204
+176
+137
+127
+115
+43
+57
+62
+88
+82
+59
+158
+125
+46
+171
+129
+45
+161
+127
+40
+158
+125
+46
+158
+125
+46
+168
+127
+42
+161
+127
+40
+158
+125
+46
+158
+125
+46
+168
+127
+42
+171
+129
+45
+145
+114
+49
+69
+69
+61
+51
+62
+63
+187
+166
+150
+250
+200
+166
+250
+197
+158
+251
+192
+154
+250
+197
+158
+253
+204
+176
+133
+120
+107
+48
+58
+59
+95
+87
+59
+168
+127
+42
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+158
+125
+46
+75
+74
+61
+62
+63
+61
+168
+127
+42
+161
+127
+40
+158
+125
+46
+171
+129
+45
+83
+78
+61
+91
+92
+89
+255
+215
+190
+255
+215
+190
+207
+178
+158
+58
+69
+70
+63
+69
+60
+145
+114
+49
+171
+129
+45
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+171
+129
+45
+105
+93
+60
+43
+57
+62
+137
+110
+49
+171
+129
+45
+158
+125
+46
+171
+129
+45
+137
+110
+49
+51
+62
+63
+146
+135
+124
+58
+69
+70
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+152
+119
+47
+65
+67
+64
+137
+127
+115
+255
+215
+190
+255
+215
+190
+245
+212
+186
+120
+114
+108
+48
+58
+59
+100
+89
+56
+168
+127
+42
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+171
+129
+45
+129
+106
+52
+61
+67
+58
+63
+74
+74
+207
+178
+158
+255
+215
+190
+255
+215
+190
+255
+215
+190
+161
+144
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+234
+125
+52
+173
+106
+60
+95
+78
+64
+209
+117
+53
+234
+126
+45
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+126
+45
+209
+117
+53
+89
+75
+66
+51
+62
+63
+187
+166
+150
+250
+197
+158
+251
+192
+154
+249
+189
+146
+251
+192
+154
+250
+200
+166
+161
+144
+134
+41
+58
+57
+95
+78
+64
+199
+115
+54
+234
+126
+45
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+126
+45
+199
+115
+54
+89
+75
+66
+41
+58
+57
+167
+142
+123
+250
+200
+166
+251
+192
+154
+252
+185
+144
+249
+189
+146
+250
+197
+158
+212
+173
+150
+63
+74
+74
+69
+69
+61
+183
+110
+59
+234
+126
+45
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+126
+45
+163
+104
+61
+41
+58
+57
+135
+94
+64
+234
+126
+45
+224
+123
+55
+234
+125
+52
+188
+112
+56
+51
+62
+63
+109
+106
+99
+51
+62
+63
+188
+112
+56
+234
+126
+45
+224
+123
+55
+234
+125
+52
+188
+112
+56
+43
+57
+62
+112
+85
+63
+234
+126
+45
+227
+126
+50
+224
+123
+55
+227
+126
+50
+234
+126
+45
+95
+78
+64
+109
+106
+99
+217
+187
+166
+58
+69
+70
+69
+69
+61
+188
+112
+56
+234
+126
+45
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+125
+52
+214
+121
+50
+95
+78
+64
+146
+97
+64
+234
+125
+52
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+251
+192
+154
+247
+165
+111
+249
+146
+83
+247
+130
+53
+247
+123
+41
+247
+118
+39
+247
+123
+41
+247
+130
+53
+247
+143
+74
+249
+159
+103
+250
+176
+132
+186
+157
+134
+51
+62
+63
+81
+73
+62
+188
+112
+56
+234
+126
+45
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+126
+45
+212
+120
+56
+106
+82
+65
+41
+58
+57
+146
+135
+124
+255
+215
+190
+255
+215
+190
+234
+204
+183
+63
+74
+74
+125
+90
+64
+234
+126
+45
+224
+123
+55
+227
+126
+50
+234
+125
+52
+89
+75
+66
+62
+63
+61
+199
+115
+54
+234
+126
+45
+224
+123
+55
+224
+123
+55
+234
+126
+45
+163
+104
+61
+48
+58
+59
+217
+187
+166
+172
+150
+134
+41
+58
+57
+106
+82
+65
+214
+121
+50
+234
+126
+45
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+225
+124
+48
+81
+73
+62
+69
+69
+61
+227
+126
+50
+227
+126
+50
+224
+123
+55
+238
+123
+45
+125
+90
+64
+55
+66
+67
+250
+176
+132
+246
+156
+93
+250
+139
+73
+247
+123
+41
+247
+111
+26
+246
+109
+10
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+123
+41
+250
+139
+73
+249
+159
+103
+248
+180
+134
+232
+190
+161
+47
+40
+38
+71
+60
+43
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+71
+60
+43
+71
+60
+43
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+160
+120
+43
+170
+137
+67
+237
+233
+225
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+186
+181
+179
+74
+68
+68
+89
+75
+66
+212
+173
+150
+250
+197
+158
+251
+192
+154
+249
+189
+146
+251
+192
+154
+253
+204
+176
+234
+204
+183
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+152
+119
+47
+168
+127
+42
+158
+125
+46
+158
+125
+46
+168
+127
+42
+171
+129
+45
+171
+129
+45
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+111
+94
+57
+48
+58
+59
+161
+144
+134
+255
+215
+190
+255
+215
+190
+255
+215
+190
+172
+150
+134
+48
+58
+59
+95
+87
+59
+168
+127
+42
+168
+127
+42
+158
+125
+46
+161
+127
+40
+171
+129
+45
+158
+125
+46
+152
+119
+47
+152
+119
+47
+168
+127
+42
+168
+127
+42
+158
+125
+46
+158
+125
+46
+168
+127
+42
+152
+119
+47
+69
+69
+61
+58
+69
+70
+217
+187
+166
+255
+215
+190
+255
+215
+190
+255
+215
+190
+172
+150
+134
+43
+57
+62
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+171
+129
+45
+171
+129
+45
+171
+129
+45
+158
+125
+46
+168
+127
+42
+137
+110
+49
+83
+78
+61
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+88
+82
+59
+84
+85
+82
+255
+215
+190
+238
+205
+179
+84
+85
+82
+62
+63
+61
+145
+114
+49
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+171
+129
+45
+171
+129
+45
+171
+129
+45
+168
+127
+42
+161
+127
+40
+158
+125
+46
+88
+82
+59
+152
+119
+47
+161
+127
+40
+158
+125
+46
+168
+127
+42
+145
+114
+49
+51
+62
+63
+137
+127
+115
+58
+69
+70
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+152
+119
+47
+63
+69
+60
+137
+127
+115
+255
+215
+190
+255
+215
+190
+137
+127
+115
+48
+58
+59
+105
+93
+60
+171
+129
+45
+161
+127
+40
+158
+125
+46
+168
+127
+42
+168
+127
+42
+158
+125
+46
+152
+119
+47
+152
+119
+47
+168
+127
+42
+171
+129
+45
+158
+125
+46
+158
+125
+46
+171
+129
+45
+145
+114
+49
+62
+63
+61
+70
+79
+77
+227
+196
+175
+255
+215
+190
+255
+215
+190
+161
+144
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+227
+126
+50
+212
+120
+56
+214
+121
+50
+227
+126
+50
+224
+123
+55
+227
+126
+50
+234
+126
+45
+234
+126
+45
+234
+125
+52
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+209
+117
+53
+76
+70
+64
+70
+79
+77
+234
+204
+183
+253
+212
+188
+251
+209
+178
+253
+212
+188
+187
+166
+150
+43
+57
+62
+95
+78
+64
+225
+124
+48
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+125
+52
+234
+126
+45
+234
+126
+45
+227
+126
+50
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+125
+52
+214
+121
+50
+95
+78
+64
+48
+58
+59
+194
+173
+157
+253
+212
+188
+251
+209
+178
+251
+209
+178
+245
+212
+186
+91
+92
+89
+62
+63
+61
+188
+112
+56
+234
+126
+45
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+125
+52
+234
+125
+52
+234
+126
+45
+227
+126
+50
+224
+123
+55
+234
+126
+45
+125
+90
+64
+146
+97
+64
+234
+125
+52
+224
+123
+55
+227
+126
+50
+194
+112
+58
+56
+64
+60
+97
+98
+96
+56
+64
+60
+188
+112
+56
+227
+126
+50
+224
+123
+55
+224
+123
+55
+212
+120
+56
+183
+110
+59
+214
+121
+50
+227
+126
+50
+224
+123
+55
+227
+126
+50
+227
+126
+50
+234
+126
+45
+95
+78
+64
+84
+85
+82
+91
+92
+89
+62
+63
+61
+188
+112
+56
+234
+126
+45
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+125
+52
+234
+126
+45
+234
+126
+45
+227
+126
+50
+224
+123
+55
+227
+126
+50
+224
+123
+55
+209
+117
+53
+227
+126
+50
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+251
+192
+154
+247
+165
+111
+249
+146
+83
+247
+130
+60
+247
+123
+41
+247
+123
+41
+247
+130
+53
+248
+138
+64
+249
+152
+92
+249
+174
+124
+209
+171
+139
+58
+69
+70
+81
+73
+62
+209
+117
+53
+234
+125
+52
+224
+123
+55
+224
+123
+55
+227
+126
+50
+227
+126
+50
+234
+125
+52
+234
+125
+52
+234
+125
+52
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+227
+126
+50
+112
+85
+63
+41
+58
+57
+172
+150
+134
+255
+215
+190
+227
+196
+175
+63
+74
+74
+135
+94
+64
+234
+125
+52
+224
+123
+55
+224
+123
+55
+224
+123
+55
+194
+112
+58
+199
+115
+54
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+238
+128
+40
+163
+104
+61
+55
+66
+67
+161
+144
+134
+58
+69
+70
+95
+78
+64
+225
+124
+48
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+227
+126
+50
+234
+126
+45
+234
+126
+45
+234
+125
+52
+227
+126
+50
+234
+125
+52
+173
+106
+60
+118
+86
+65
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+125
+52
+146
+97
+64
+51
+62
+63
+252
+185
+144
+249
+159
+103
+247
+143
+74
+247
+130
+53
+246
+116
+28
+246
+109
+10
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+111
+26
+247
+118
+39
+247
+130
+53
+249
+146
+83
+251
+168
+115
+251
+192
+154
+154
+133
+118
+24
+22
+23
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+108
+87
+46
+47
+40
+38
+158
+125
+46
+158
+125
+46
+158
+125
+46
+160
+120
+43
+156
+125
+62
+224
+207
+180
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+152
+147
+147
+35
+31
+30
+55
+48
+48
+154
+133
+118
+217
+187
+166
+253
+204
+176
+253
+204
+176
+253
+212
+188
+234
+204
+183
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+158
+125
+46
+168
+127
+42
+158
+125
+46
+123
+102
+54
+105
+93
+60
+111
+94
+57
+129
+106
+52
+168
+127
+42
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+83
+78
+61
+58
+69
+70
+227
+196
+175
+255
+215
+190
+217
+187
+166
+58
+69
+70
+75
+74
+61
+168
+127
+42
+161
+127
+40
+158
+125
+46
+168
+127
+42
+152
+119
+47
+105
+93
+60
+69
+69
+61
+62
+63
+61
+62
+63
+61
+75
+74
+61
+117
+98
+55
+161
+127
+40
+161
+127
+40
+158
+125
+46
+171
+129
+45
+145
+114
+49
+56
+64
+60
+97
+98
+96
+245
+212
+186
+255
+215
+190
+227
+196
+175
+63
+74
+74
+75
+74
+61
+158
+125
+46
+168
+127
+42
+158
+125
+46
+158
+125
+46
+168
+127
+42
+158
+125
+46
+129
+106
+52
+111
+94
+57
+105
+93
+60
+129
+106
+52
+158
+125
+46
+168
+127
+42
+161
+127
+40
+152
+119
+47
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+84
+85
+82
+255
+215
+190
+161
+144
+134
+48
+58
+59
+123
+102
+54
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+145
+114
+49
+117
+98
+55
+105
+93
+60
+117
+98
+55
+145
+114
+49
+171
+129
+45
+168
+127
+42
+152
+119
+47
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+145
+114
+49
+51
+62
+63
+137
+127
+115
+58
+69
+70
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+63
+69
+60
+137
+127
+115
+255
+215
+190
+194
+173
+157
+48
+58
+59
+88
+82
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+152
+119
+47
+95
+87
+59
+69
+69
+61
+62
+63
+61
+62
+63
+61
+83
+78
+61
+123
+102
+54
+168
+127
+42
+161
+127
+40
+158
+125
+46
+171
+129
+45
+129
+106
+52
+51
+62
+63
+120
+114
+108
+255
+215
+190
+255
+215
+190
+161
+144
+134
+56
+64
+60
+199
+115
+54
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+227
+126
+50
+227
+126
+50
+227
+126
+50
+188
+112
+56
+146
+97
+64
+135
+94
+64
+146
+97
+64
+199
+115
+54
+234
+125
+52
+224
+123
+55
+224
+123
+55
+224
+123
+55
+234
+126
+45
+173
+106
+60
+48
+58
+59
+146
+135
+124
+255
+215
+190
+255
+215
+190
+234
+204
+183
+77
+85
+81
+76
+70
+64
+214
+121
+50
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+125
+52
+214
+121
+50
+163
+104
+61
+135
+94
+64
+135
+94
+64
+163
+104
+61
+224
+123
+55
+234
+125
+52
+224
+123
+55
+224
+123
+55
+227
+126
+50
+212
+120
+56
+76
+70
+64
+77
+85
+81
+238
+205
+179
+255
+215
+190
+255
+215
+190
+161
+144
+134
+48
+58
+59
+155
+100
+63
+234
+126
+45
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+125
+52
+199
+115
+54
+155
+100
+63
+135
+94
+64
+146
+97
+64
+188
+112
+56
+227
+126
+50
+227
+126
+50
+214
+121
+50
+209
+117
+53
+227
+126
+50
+224
+123
+55
+227
+126
+50
+194
+112
+58
+56
+64
+60
+101
+100
+92
+56
+64
+60
+188
+112
+56
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+234
+125
+52
+227
+126
+50
+224
+123
+55
+227
+126
+50
+227
+126
+50
+199
+115
+54
+125
+90
+64
+51
+62
+63
+55
+66
+67
+41
+58
+57
+146
+97
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+224
+123
+55
+234
+126
+45
+209
+117
+53
+155
+100
+63
+135
+94
+64
+139
+96
+61
+183
+110
+59
+227
+126
+50
+227
+126
+50
+227
+126
+50
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+251
+192
+154
+247
+165
+111
+249
+146
+83
+247
+130
+60
+247
+130
+53
+247
+130
+53
+247
+130
+60
+249
+146
+83
+247
+165
+111
+252
+185
+144
+101
+100
+92
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+227
+126
+50
+173
+106
+60
+135
+94
+64
+135
+94
+64
+163
+104
+61
+214
+121
+50
+234
+125
+52
+224
+123
+55
+224
+123
+55
+227
+126
+50
+224
+123
+55
+81
+73
+62
+58
+69
+70
+227
+196
+175
+234
+204
+183
+63
+74
+74
+135
+94
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+227
+126
+50
+224
+123
+55
+227
+126
+50
+234
+125
+52
+212
+120
+56
+155
+100
+63
+69
+69
+61
+76
+78
+76
+84
+85
+82
+65
+67
+64
+209
+117
+53
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+227
+126
+50
+183
+110
+59
+139
+96
+61
+135
+94
+64
+155
+100
+63
+209
+117
+53
+234
+125
+52
+224
+123
+55
+212
+120
+56
+224
+123
+55
+224
+123
+55
+224
+123
+55
+234
+126
+45
+139
+96
+61
+55
+66
+67
+251
+192
+154
+251
+168
+115
+249
+146
+83
+247
+130
+53
+247
+118
+39
+246
+109
+10
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+123
+41
+248
+138
+64
+249
+152
+92
+250
+176
+132
+232
+190
+161
+65
+58
+56
+59
+50
+39
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+145
+114
+49
+47
+40
+38
+129
+106
+52
+168
+127
+42
+160
+120
+43
+158
+125
+46
+224
+207
+180
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+219
+212
+208
+62
+63
+61
+35
+31
+30
+91
+92
+89
+164
+158
+157
+186
+181
+179
+82
+69
+65
+176
+156
+141
+255
+215
+190
+255
+215
+190
+238
+205
+179
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+129
+106
+52
+65
+67
+64
+48
+58
+59
+55
+66
+67
+55
+66
+67
+48
+58
+59
+83
+78
+61
+145
+114
+49
+168
+127
+42
+158
+125
+46
+158
+125
+46
+168
+127
+42
+137
+110
+49
+51
+62
+63
+146
+135
+124
+255
+215
+190
+120
+114
+108
+56
+64
+60
+145
+114
+49
+171
+129
+45
+158
+125
+46
+168
+127
+42
+152
+119
+47
+69
+69
+61
+43
+57
+62
+109
+106
+99
+146
+135
+124
+137
+127
+115
+91
+92
+89
+43
+57
+62
+88
+82
+59
+158
+125
+46
+161
+127
+40
+158
+125
+46
+171
+129
+45
+117
+98
+55
+48
+58
+59
+172
+150
+134
+255
+215
+190
+146
+135
+124
+51
+62
+63
+137
+110
+49
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+145
+114
+49
+75
+74
+61
+48
+58
+59
+55
+66
+67
+55
+66
+67
+48
+58
+59
+69
+69
+61
+137
+110
+49
+168
+127
+42
+161
+127
+40
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+91
+92
+89
+234
+204
+183
+70
+79
+77
+83
+78
+61
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+111
+94
+57
+56
+64
+60
+43
+57
+62
+58
+69
+70
+48
+58
+59
+56
+64
+60
+100
+89
+56
+158
+125
+46
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+145
+114
+49
+51
+62
+63
+137
+127
+115
+58
+69
+70
+111
+94
+57
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+65
+67
+64
+137
+127
+115
+255
+215
+190
+97
+98
+96
+62
+63
+61
+152
+119
+47
+168
+127
+42
+158
+125
+46
+168
+127
+42
+137
+110
+49
+62
+63
+61
+51
+62
+63
+120
+114
+108
+146
+135
+124
+137
+127
+115
+84
+85
+82
+43
+57
+62
+95
+87
+59
+168
+127
+42
+158
+125
+46
+158
+125
+46
+171
+129
+45
+100
+89
+56
+43
+57
+62
+194
+173
+157
+255
+215
+190
+161
+144
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+224
+123
+55
+118
+86
+65
+51
+62
+63
+43
+57
+62
+58
+69
+70
+41
+58
+57
+56
+64
+60
+146
+97
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+125
+52
+106
+82
+65
+63
+74
+74
+234
+204
+183
+255
+215
+190
+161
+144
+134
+48
+58
+59
+173
+106
+60
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+125
+52
+183
+110
+59
+76
+70
+64
+43
+57
+62
+55
+66
+67
+55
+66
+67
+48
+58
+59
+81
+73
+62
+183
+110
+59
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+126
+45
+163
+104
+61
+48
+58
+59
+161
+144
+134
+255
+215
+190
+234
+204
+183
+63
+74
+74
+95
+78
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+227
+126
+50
+227
+126
+50
+135
+94
+64
+62
+63
+61
+43
+57
+62
+58
+69
+70
+43
+57
+62
+51
+62
+63
+125
+90
+64
+225
+124
+48
+227
+126
+50
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+194
+112
+58
+56
+64
+60
+97
+98
+96
+56
+64
+60
+188
+112
+56
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+234
+125
+52
+227
+126
+50
+173
+106
+60
+95
+78
+64
+56
+64
+60
+51
+62
+63
+120
+114
+108
+70
+79
+77
+89
+75
+66
+225
+124
+48
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+126
+45
+163
+104
+61
+65
+67
+64
+41
+58
+57
+55
+66
+67
+51
+62
+63
+48
+58
+59
+106
+82
+65
+209
+117
+53
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+251
+192
+154
+247
+165
+111
+249
+146
+83
+248
+138
+64
+247
+130
+53
+247
+130
+60
+250
+139
+73
+246
+156
+93
+250
+176
+132
+186
+157
+134
+41
+58
+57
+146
+97
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+234
+125
+52
+199
+115
+54
+89
+75
+66
+48
+58
+59
+51
+62
+63
+55
+66
+67
+43
+57
+62
+76
+70
+64
+173
+106
+60
+234
+125
+52
+224
+123
+55
+224
+123
+55
+227
+126
+50
+183
+110
+59
+51
+62
+63
+137
+127
+115
+234
+204
+183
+63
+74
+74
+135
+94
+64
+234
+125
+52
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+126
+45
+199
+115
+54
+125
+90
+64
+69
+69
+61
+41
+58
+57
+97
+98
+96
+146
+135
+124
+51
+62
+63
+146
+97
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+227
+126
+50
+214
+121
+50
+106
+82
+65
+48
+58
+59
+51
+62
+63
+55
+66
+67
+41
+58
+57
+65
+67
+64
+163
+104
+61
+234
+126
+45
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+234
+125
+52
+139
+96
+61
+55
+66
+67
+250
+197
+158
+251
+168
+115
+247
+150
+84
+247
+130
+60
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+246
+116
+28
+247
+130
+53
+247
+143
+74
+249
+159
+103
+252
+185
+144
+154
+133
+118
+24
+22
+23
+108
+87
+46
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+71
+60
+43
+85
+71
+43
+171
+129
+45
+160
+120
+43
+216
+194
+154
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+237
+233
+225
+65
+58
+56
+62
+63
+61
+219
+212
+208
+253
+255
+252
+237
+233
+225
+120
+114
+108
+35
+31
+30
+55
+48
+48
+227
+196
+175
+255
+215
+190
+238
+205
+179
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+129
+106
+52
+51
+62
+63
+84
+85
+82
+187
+166
+150
+227
+196
+175
+227
+196
+175
+161
+144
+134
+51
+62
+63
+69
+69
+61
+152
+119
+47
+168
+127
+42
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+91
+92
+89
+217
+187
+166
+55
+66
+67
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+75
+74
+61
+58
+69
+70
+187
+166
+150
+255
+215
+190
+255
+215
+190
+255
+215
+190
+245
+212
+186
+161
+144
+134
+43
+57
+62
+100
+89
+56
+171
+129
+45
+158
+125
+46
+158
+125
+46
+161
+127
+40
+75
+74
+61
+84
+85
+82
+234
+204
+183
+76
+78
+76
+88
+82
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+145
+114
+49
+62
+63
+61
+63
+74
+74
+176
+156
+141
+227
+196
+175
+227
+196
+175
+176
+156
+141
+70
+79
+77
+62
+63
+61
+145
+114
+49
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+97
+98
+96
+172
+150
+134
+48
+58
+59
+129
+106
+52
+168
+127
+42
+158
+125
+46
+158
+125
+46
+171
+129
+45
+105
+93
+60
+43
+57
+62
+120
+114
+108
+207
+178
+158
+227
+196
+175
+217
+187
+166
+120
+114
+108
+41
+58
+57
+95
+87
+59
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+145
+114
+49
+56
+64
+60
+137
+127
+115
+58
+69
+70
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+65
+67
+64
+146
+135
+124
+207
+178
+158
+48
+58
+59
+111
+94
+57
+171
+129
+45
+158
+125
+46
+168
+127
+42
+152
+119
+47
+62
+63
+61
+70
+79
+77
+207
+178
+158
+255
+215
+190
+255
+215
+190
+255
+215
+190
+238
+205
+179
+137
+127
+115
+43
+57
+62
+117
+98
+55
+168
+127
+42
+158
+125
+46
+168
+127
+42
+152
+119
+47
+62
+63
+61
+109
+106
+99
+255
+215
+190
+161
+144
+134
+56
+64
+60
+199
+115
+54
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+227
+126
+50
+106
+82
+65
+41
+58
+57
+137
+127
+115
+217
+187
+166
+227
+196
+175
+207
+178
+158
+109
+106
+99
+41
+58
+57
+146
+97
+64
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+125
+52
+173
+106
+60
+48
+58
+59
+176
+156
+141
+245
+212
+186
+70
+79
+77
+95
+78
+64
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+125
+52
+188
+112
+56
+56
+64
+60
+70
+79
+77
+176
+156
+141
+227
+196
+175
+227
+196
+175
+176
+156
+141
+63
+74
+74
+62
+63
+61
+194
+112
+58
+227
+126
+50
+224
+123
+55
+227
+126
+50
+227
+126
+50
+95
+78
+64
+77
+85
+81
+245
+212
+186
+172
+150
+134
+48
+58
+59
+173
+106
+60
+234
+126
+45
+224
+123
+55
+224
+123
+55
+234
+125
+52
+135
+94
+64
+35
+56
+60
+120
+114
+108
+207
+178
+158
+227
+196
+175
+217
+187
+166
+133
+120
+107
+35
+56
+60
+118
+86
+65
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+194
+112
+58
+56
+64
+60
+101
+100
+92
+56
+64
+60
+188
+112
+56
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+194
+112
+58
+95
+78
+64
+48
+58
+59
+70
+79
+77
+146
+135
+124
+217
+187
+166
+207
+178
+158
+51
+62
+63
+155
+100
+63
+234
+126
+45
+224
+123
+55
+224
+123
+55
+234
+125
+52
+163
+104
+61
+48
+58
+59
+91
+92
+89
+194
+173
+157
+227
+196
+175
+217
+187
+166
+146
+135
+124
+43
+57
+62
+89
+75
+66
+214
+121
+50
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+251
+192
+154
+247
+165
+111
+247
+150
+84
+248
+138
+64
+247
+130
+60
+248
+138
+64
+249
+146
+83
+247
+165
+111
+239
+182
+144
+91
+92
+89
+76
+70
+64
+224
+123
+55
+227
+126
+50
+224
+123
+55
+227
+126
+50
+209
+117
+53
+76
+70
+64
+55
+66
+67
+172
+150
+134
+227
+196
+175
+227
+196
+175
+187
+166
+150
+77
+85
+81
+51
+62
+63
+173
+106
+60
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+126
+45
+118
+86
+65
+58
+69
+70
+217
+187
+166
+70
+79
+77
+135
+94
+64
+234
+125
+52
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+225
+124
+48
+125
+90
+64
+56
+64
+60
+55
+66
+67
+120
+114
+108
+187
+166
+150
+245
+212
+186
+120
+114
+108
+76
+70
+64
+214
+121
+50
+227
+126
+50
+224
+123
+55
+227
+126
+50
+225
+124
+48
+95
+78
+64
+43
+57
+62
+146
+135
+124
+217
+187
+166
+227
+196
+175
+194
+173
+157
+91
+92
+89
+48
+58
+59
+163
+104
+61
+234
+125
+52
+224
+123
+55
+224
+123
+55
+224
+123
+55
+234
+126
+45
+139
+96
+61
+55
+66
+67
+250
+197
+158
+249
+174
+124
+247
+150
+84
+247
+130
+60
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+111
+26
+247
+118
+39
+247
+130
+53
+249
+146
+83
+251
+168
+115
+239
+182
+144
+65
+58
+56
+59
+50
+39
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+108
+87
+46
+47
+40
+38
+152
+119
+47
+170
+137
+67
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+174
+168
+167
+24
+22
+23
+109
+106
+99
+152
+147
+147
+97
+98
+96
+47
+40
+38
+24
+22
+23
+35
+31
+30
+35
+31
+30
+176
+156
+141
+255
+215
+190
+238
+205
+179
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+69
+69
+61
+76
+78
+76
+227
+196
+175
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+187
+166
+150
+51
+62
+63
+95
+87
+59
+168
+127
+42
+158
+125
+46
+158
+125
+46
+171
+129
+45
+117
+98
+55
+55
+66
+67
+109
+106
+99
+48
+58
+59
+137
+110
+49
+168
+127
+42
+158
+125
+46
+168
+127
+42
+117
+98
+55
+48
+58
+59
+187
+166
+150
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+137
+127
+115
+51
+62
+63
+145
+114
+49
+168
+127
+42
+158
+125
+46
+171
+129
+45
+117
+98
+55
+55
+66
+67
+137
+127
+115
+55
+66
+67
+123
+102
+54
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+55
+66
+67
+207
+178
+158
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+217
+187
+166
+58
+69
+70
+83
+78
+61
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+88
+82
+59
+91
+92
+89
+109
+106
+99
+69
+69
+61
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+145
+114
+49
+51
+62
+63
+120
+114
+108
+245
+212
+186
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+137
+127
+115
+48
+58
+59
+129
+106
+52
+168
+127
+42
+158
+125
+46
+158
+125
+46
+168
+127
+42
+145
+114
+49
+51
+62
+63
+137
+127
+115
+58
+69
+70
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+65
+67
+64
+146
+135
+124
+146
+135
+124
+62
+63
+61
+152
+119
+47
+168
+127
+42
+158
+125
+46
+168
+127
+42
+100
+89
+56
+51
+62
+63
+207
+178
+158
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+109
+106
+99
+63
+69
+60
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+100
+89
+56
+51
+62
+63
+227
+196
+175
+172
+150
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+126
+45
+155
+100
+63
+41
+58
+57
+146
+135
+124
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+245
+212
+186
+109
+106
+99
+56
+64
+60
+199
+115
+54
+227
+126
+50
+224
+123
+55
+227
+126
+50
+224
+123
+55
+76
+70
+64
+109
+106
+99
+194
+173
+157
+43
+57
+62
+163
+104
+61
+234
+125
+52
+224
+123
+55
+224
+123
+55
+225
+124
+48
+89
+75
+66
+63
+74
+74
+217
+187
+166
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+217
+187
+166
+58
+69
+70
+95
+78
+64
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+126
+45
+155
+100
+63
+43
+57
+62
+207
+178
+158
+109
+106
+99
+76
+70
+64
+224
+123
+55
+227
+126
+50
+224
+123
+55
+227
+126
+50
+194
+112
+58
+51
+62
+63
+120
+114
+108
+253
+212
+188
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+137
+127
+115
+48
+58
+59
+173
+106
+60
+234
+125
+52
+224
+123
+55
+224
+123
+55
+227
+126
+50
+194
+112
+58
+56
+64
+60
+101
+100
+92
+56
+64
+60
+188
+112
+56
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+188
+112
+56
+62
+63
+61
+58
+69
+70
+161
+144
+134
+234
+204
+183
+255
+215
+190
+255
+215
+190
+137
+127
+115
+62
+63
+61
+209
+117
+53
+227
+126
+50
+224
+123
+55
+227
+126
+50
+212
+120
+56
+69
+69
+61
+77
+85
+81
+234
+204
+183
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+176
+156
+141
+35
+56
+60
+135
+94
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+251
+192
+154
+251
+168
+115
+247
+150
+84
+250
+139
+73
+248
+138
+64
+250
+139
+73
+249
+152
+92
+249
+174
+124
+209
+171
+139
+43
+57
+62
+135
+94
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+234
+126
+45
+112
+85
+63
+51
+62
+63
+194
+173
+157
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+227
+196
+175
+70
+79
+77
+76
+70
+64
+214
+121
+50
+227
+126
+50
+224
+123
+55
+227
+126
+50
+183
+110
+59
+48
+58
+59
+146
+135
+124
+77
+85
+81
+135
+94
+64
+234
+125
+52
+224
+123
+55
+224
+123
+55
+227
+126
+50
+214
+121
+50
+95
+78
+64
+35
+56
+60
+120
+114
+108
+217
+187
+166
+255
+215
+190
+255
+215
+190
+227
+196
+175
+58
+69
+70
+125
+90
+64
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+125
+52
+139
+96
+61
+41
+58
+57
+172
+150
+134
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+234
+204
+183
+77
+85
+81
+76
+70
+64
+214
+121
+50
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+125
+52
+139
+96
+61
+51
+62
+63
+250
+200
+166
+249
+174
+124
+249
+152
+92
+247
+130
+60
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+111
+26
+247
+123
+41
+248
+138
+64
+249
+152
+92
+249
+174
+124
+178
+146
+122
+24
+22
+23
+101
+83
+47
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+152
+119
+47
+47
+40
+38
+123
+102
+54
+209
+171
+139
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+164
+158
+157
+24
+22
+23
+24
+22
+23
+24
+22
+23
+24
+22
+23
+24
+22
+23
+35
+31
+30
+35
+31
+30
+47
+40
+38
+194
+173
+157
+255
+215
+190
+238
+205
+179
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+129
+106
+52
+48
+58
+59
+176
+156
+141
+255
+215
+190
+255
+215
+190
+253
+212
+188
+255
+215
+190
+255
+215
+190
+255
+215
+190
+120
+114
+108
+56
+64
+60
+152
+119
+47
+161
+127
+40
+158
+125
+46
+168
+127
+42
+137
+110
+49
+51
+62
+63
+48
+58
+59
+75
+74
+61
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+63
+74
+74
+194
+173
+157
+207
+178
+158
+207
+178
+158
+207
+178
+158
+207
+178
+158
+207
+178
+158
+207
+178
+158
+172
+150
+134
+48
+58
+59
+111
+94
+57
+171
+129
+45
+158
+125
+46
+168
+127
+42
+152
+119
+47
+56
+64
+60
+51
+62
+63
+56
+64
+60
+152
+119
+47
+168
+127
+42
+158
+125
+46
+168
+127
+42
+145
+114
+49
+51
+62
+63
+146
+135
+124
+255
+215
+190
+255
+215
+190
+253
+212
+188
+253
+212
+188
+255
+215
+190
+255
+215
+190
+146
+135
+124
+51
+62
+63
+145
+114
+49
+168
+127
+42
+158
+125
+46
+158
+125
+46
+168
+127
+42
+88
+82
+59
+70
+79
+77
+63
+74
+74
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+171
+129
+45
+95
+87
+59
+55
+66
+67
+227
+196
+175
+255
+215
+190
+255
+215
+190
+253
+212
+188
+255
+215
+190
+255
+215
+190
+234
+204
+183
+70
+79
+77
+88
+82
+59
+168
+127
+42
+158
+125
+46
+158
+125
+46
+168
+127
+42
+145
+114
+49
+56
+64
+60
+137
+127
+115
+58
+69
+70
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+63
+69
+60
+137
+127
+115
+97
+98
+96
+83
+78
+61
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+69
+69
+61
+84
+85
+82
+207
+178
+158
+207
+178
+158
+207
+178
+158
+207
+178
+158
+207
+178
+158
+207
+178
+158
+217
+187
+166
+146
+135
+124
+48
+58
+59
+129
+106
+52
+168
+127
+42
+158
+125
+46
+168
+127
+42
+129
+106
+52
+51
+62
+63
+187
+166
+150
+176
+156
+141
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+89
+75
+66
+70
+79
+77
+245
+212
+186
+255
+215
+190
+255
+215
+190
+253
+212
+188
+255
+215
+190
+255
+215
+190
+217
+187
+166
+43
+57
+62
+125
+90
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+234
+126
+45
+106
+82
+65
+77
+85
+81
+133
+120
+107
+62
+63
+61
+209
+117
+53
+227
+126
+50
+224
+123
+55
+227
+126
+50
+183
+110
+59
+48
+58
+59
+161
+144
+134
+255
+215
+190
+255
+215
+190
+253
+212
+188
+253
+212
+188
+255
+215
+190
+255
+215
+190
+146
+135
+124
+48
+58
+59
+188
+112
+56
+227
+126
+50
+224
+123
+55
+227
+126
+50
+199
+115
+54
+62
+63
+61
+133
+120
+107
+77
+85
+81
+118
+86
+65
+234
+126
+45
+224
+123
+55
+224
+123
+55
+234
+126
+45
+125
+90
+64
+55
+66
+67
+227
+196
+175
+255
+215
+190
+255
+215
+190
+253
+212
+188
+255
+215
+190
+255
+215
+190
+234
+204
+183
+63
+74
+74
+106
+82
+65
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+194
+112
+58
+56
+64
+60
+97
+98
+96
+56
+64
+60
+188
+112
+56
+227
+126
+50
+224
+123
+55
+227
+126
+50
+224
+123
+55
+89
+75
+66
+63
+74
+74
+217
+187
+166
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+91
+92
+89
+95
+78
+64
+227
+126
+50
+227
+126
+50
+224
+123
+55
+234
+126
+45
+146
+97
+64
+43
+57
+62
+187
+166
+150
+255
+215
+190
+255
+215
+190
+253
+212
+188
+255
+215
+190
+255
+215
+190
+255
+215
+190
+101
+100
+92
+76
+70
+64
+224
+123
+55
+227
+126
+50
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+251
+192
+154
+251
+168
+115
+247
+150
+84
+250
+139
+73
+250
+139
+73
+247
+143
+74
+249
+159
+103
+250
+176
+132
+154
+133
+118
+51
+62
+63
+183
+110
+59
+227
+126
+50
+224
+123
+55
+227
+126
+50
+199
+115
+54
+62
+63
+61
+133
+120
+107
+255
+215
+190
+255
+215
+190
+253
+212
+188
+253
+212
+188
+255
+215
+190
+255
+215
+190
+176
+156
+141
+43
+57
+62
+163
+104
+61
+234
+125
+52
+224
+123
+55
+227
+126
+50
+214
+121
+50
+76
+70
+64
+91
+92
+89
+70
+79
+77
+135
+94
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+234
+125
+52
+146
+97
+64
+35
+56
+60
+161
+144
+134
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+194
+173
+157
+48
+58
+59
+163
+104
+61
+234
+126
+45
+224
+123
+55
+227
+126
+50
+214
+121
+50
+76
+70
+64
+97
+98
+96
+255
+215
+190
+255
+215
+190
+255
+215
+190
+253
+212
+188
+255
+215
+190
+255
+215
+190
+187
+166
+150
+43
+57
+62
+163
+104
+61
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+125
+52
+139
+96
+61
+55
+66
+67
+250
+200
+166
+249
+174
+124
+249
+152
+92
+247
+130
+60
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+109
+10
+247
+111
+26
+247
+123
+41
+248
+138
+64
+249
+159
+103
+248
+180
+134
+124
+111
+99
+35
+31
+30
+137
+110
+49
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+59
+50
+39
+85
+71
+43
+216
+194
+154
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+207
+202
+200
+47
+40
+38
+24
+22
+23
+35
+31
+30
+35
+31
+30
+35
+31
+30
+35
+31
+30
+24
+22
+23
+65
+58
+56
+238
+205
+179
+255
+215
+190
+238
+205
+179
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+100
+89
+56
+63
+74
+74
+227
+196
+175
+255
+215
+190
+253
+204
+176
+250
+200
+166
+250
+200
+166
+251
+209
+178
+255
+215
+190
+194
+173
+157
+48
+58
+59
+123
+102
+54
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+63
+69
+60
+43
+57
+62
+95
+87
+59
+168
+127
+42
+158
+125
+46
+161
+127
+40
+158
+125
+46
+63
+69
+60
+43
+57
+62
+51
+62
+63
+51
+62
+63
+51
+62
+63
+51
+62
+63
+51
+62
+63
+51
+62
+63
+51
+62
+63
+51
+62
+63
+43
+57
+62
+88
+82
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+75
+74
+61
+43
+57
+62
+75
+74
+61
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+117
+98
+55
+51
+62
+63
+217
+187
+166
+255
+215
+190
+253
+204
+176
+250
+200
+166
+250
+200
+166
+253
+204
+176
+255
+215
+190
+217
+187
+166
+48
+58
+59
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+88
+82
+59
+48
+58
+59
+48
+58
+59
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+69
+69
+61
+109
+106
+99
+255
+215
+190
+253
+212
+188
+253
+204
+176
+250
+200
+166
+250
+200
+166
+253
+212
+188
+255
+215
+190
+120
+114
+108
+63
+69
+60
+158
+125
+46
+161
+127
+40
+158
+125
+46
+168
+127
+42
+145
+114
+49
+51
+62
+63
+137
+127
+115
+58
+69
+70
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+63
+69
+60
+120
+114
+108
+70
+79
+77
+105
+93
+60
+171
+129
+45
+158
+125
+46
+168
+127
+42
+152
+119
+47
+56
+64
+60
+51
+62
+63
+51
+62
+63
+51
+62
+63
+51
+62
+63
+51
+62
+63
+51
+62
+63
+51
+62
+63
+51
+62
+63
+51
+62
+63
+43
+57
+62
+111
+94
+57
+171
+129
+45
+158
+125
+46
+161
+127
+40
+152
+119
+47
+62
+63
+61
+146
+135
+124
+172
+150
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+227
+126
+50
+199
+115
+54
+62
+63
+61
+146
+135
+124
+255
+215
+190
+253
+212
+188
+250
+200
+166
+250
+200
+166
+253
+204
+176
+253
+212
+188
+253
+212
+188
+97
+98
+96
+89
+75
+66
+227
+126
+50
+227
+126
+50
+224
+123
+55
+234
+126
+45
+139
+96
+61
+51
+62
+63
+63
+74
+74
+89
+75
+66
+227
+126
+50
+227
+126
+50
+224
+123
+55
+234
+125
+52
+135
+94
+64
+55
+66
+67
+217
+187
+166
+255
+215
+190
+253
+204
+176
+250
+200
+166
+250
+200
+166
+253
+204
+176
+255
+215
+190
+217
+187
+166
+51
+62
+63
+139
+96
+61
+234
+126
+45
+224
+123
+55
+227
+126
+50
+225
+124
+48
+81
+73
+62
+58
+69
+70
+51
+62
+63
+146
+97
+64
+234
+126
+45
+224
+123
+55
+227
+126
+50
+224
+123
+55
+81
+73
+62
+109
+106
+99
+255
+215
+190
+253
+212
+188
+253
+204
+176
+250
+200
+166
+250
+200
+166
+253
+212
+188
+255
+215
+190
+120
+114
+108
+69
+69
+61
+212
+120
+56
+227
+126
+50
+224
+123
+55
+227
+126
+50
+194
+112
+58
+56
+64
+60
+101
+100
+92
+56
+64
+60
+188
+112
+56
+234
+125
+52
+224
+123
+55
+227
+126
+50
+194
+112
+58
+51
+62
+63
+146
+135
+124
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+234
+204
+183
+70
+79
+77
+118
+86
+65
+234
+125
+52
+224
+123
+55
+227
+126
+50
+227
+126
+50
+106
+82
+65
+77
+85
+81
+245
+212
+186
+255
+215
+190
+253
+204
+176
+250
+200
+166
+250
+200
+166
+251
+209
+178
+255
+215
+190
+176
+156
+141
+56
+64
+60
+188
+112
+56
+234
+125
+52
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+251
+192
+154
+251
+168
+115
+249
+152
+92
+247
+143
+74
+247
+143
+74
+247
+150
+84
+249
+159
+103
+248
+180
+134
+120
+114
+108
+69
+69
+61
+212
+120
+56
+227
+126
+50
+224
+123
+55
+234
+125
+52
+155
+100
+63
+43
+57
+62
+194
+173
+157
+255
+215
+190
+253
+204
+176
+250
+200
+166
+250
+200
+166
+253
+204
+176
+255
+215
+190
+234
+204
+183
+63
+74
+74
+112
+85
+63
+234
+125
+52
+227
+126
+50
+224
+123
+55
+234
+125
+52
+106
+82
+65
+58
+69
+70
+55
+66
+67
+135
+94
+64
+234
+125
+52
+224
+123
+55
+227
+126
+50
+227
+126
+50
+95
+78
+64
+77
+85
+81
+245
+212
+186
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+161
+144
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+227
+126
+50
+183
+110
+59
+48
+58
+59
+172
+150
+134
+255
+215
+190
+251
+209
+178
+250
+200
+166
+250
+200
+166
+253
+204
+176
+255
+215
+190
+245
+212
+186
+63
+74
+74
+112
+85
+63
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+126
+45
+139
+96
+61
+55
+66
+67
+250
+200
+166
+249
+174
+124
+249
+152
+92
+247
+130
+60
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+123
+41
+250
+139
+73
+249
+159
+103
+252
+185
+144
+82
+69
+65
+47
+40
+38
+158
+125
+46
+161
+127
+40
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+85
+71
+43
+59
+50
+39
+216
+194
+154
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+164
+158
+157
+47
+40
+38
+24
+22
+23
+24
+22
+23
+24
+22
+23
+35
+31
+30
+65
+67
+64
+65
+58
+56
+227
+196
+175
+255
+215
+190
+238
+205
+179
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+88
+82
+59
+84
+85
+82
+255
+215
+190
+251
+209
+178
+250
+197
+158
+251
+192
+154
+251
+192
+154
+250
+200
+166
+253
+212
+188
+227
+196
+175
+58
+69
+70
+105
+93
+60
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+75
+74
+61
+41
+58
+57
+111
+94
+57
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+123
+102
+54
+123
+102
+54
+123
+102
+54
+123
+102
+54
+123
+102
+54
+123
+102
+54
+123
+102
+54
+123
+102
+54
+123
+102
+54
+123
+102
+54
+123
+102
+54
+137
+110
+49
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+41
+58
+57
+83
+78
+61
+168
+127
+42
+158
+125
+46
+158
+125
+46
+171
+129
+45
+95
+87
+59
+70
+79
+77
+245
+212
+186
+253
+212
+188
+250
+200
+166
+251
+192
+154
+251
+192
+154
+250
+200
+166
+253
+212
+188
+238
+205
+179
+70
+79
+77
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+88
+82
+59
+48
+58
+59
+48
+58
+59
+129
+106
+52
+168
+127
+42
+158
+125
+46
+168
+127
+42
+152
+119
+47
+56
+64
+60
+146
+135
+124
+255
+215
+190
+253
+204
+176
+250
+197
+158
+251
+192
+154
+251
+192
+154
+253
+204
+176
+255
+215
+190
+172
+150
+134
+51
+62
+63
+145
+114
+49
+168
+127
+42
+158
+125
+46
+168
+127
+42
+145
+114
+49
+51
+62
+63
+137
+127
+115
+58
+69
+70
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+63
+69
+60
+97
+98
+96
+55
+66
+67
+123
+102
+54
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+123
+102
+54
+123
+102
+54
+123
+102
+54
+123
+102
+54
+123
+102
+54
+123
+102
+54
+123
+102
+54
+123
+102
+54
+123
+102
+54
+123
+102
+54
+117
+98
+55
+145
+114
+49
+161
+127
+40
+158
+125
+46
+158
+125
+46
+158
+125
+46
+69
+69
+61
+137
+127
+115
+172
+150
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+234
+125
+52
+183
+110
+59
+51
+62
+63
+187
+166
+150
+255
+215
+190
+253
+204
+176
+251
+192
+154
+251
+192
+154
+250
+197
+158
+253
+204
+176
+255
+215
+190
+137
+127
+115
+65
+67
+64
+209
+117
+53
+227
+126
+50
+224
+123
+55
+234
+125
+52
+163
+104
+61
+43
+57
+62
+41
+58
+57
+106
+82
+65
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+125
+52
+106
+82
+65
+77
+85
+81
+245
+212
+186
+251
+209
+178
+250
+197
+158
+249
+189
+146
+251
+192
+154
+250
+197
+158
+251
+209
+178
+238
+205
+179
+77
+85
+81
+112
+85
+63
+234
+126
+45
+224
+123
+55
+224
+123
+55
+227
+126
+50
+106
+82
+65
+41
+58
+57
+48
+58
+59
+163
+104
+61
+234
+125
+52
+224
+123
+55
+227
+126
+50
+209
+117
+53
+62
+63
+61
+146
+135
+124
+255
+215
+190
+253
+204
+176
+250
+197
+158
+251
+192
+154
+251
+192
+154
+253
+204
+176
+255
+215
+190
+176
+156
+141
+56
+64
+60
+188
+112
+56
+227
+126
+50
+224
+123
+55
+227
+126
+50
+194
+112
+58
+56
+64
+60
+101
+100
+92
+56
+64
+60
+188
+112
+56
+234
+125
+52
+224
+123
+55
+227
+126
+50
+183
+110
+59
+48
+58
+59
+176
+156
+141
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+227
+196
+175
+58
+69
+70
+139
+96
+61
+234
+125
+52
+224
+123
+55
+227
+126
+50
+214
+121
+50
+76
+70
+64
+120
+114
+108
+255
+215
+190
+253
+204
+176
+250
+197
+158
+251
+192
+154
+251
+192
+154
+250
+200
+166
+255
+215
+190
+207
+178
+158
+48
+58
+59
+163
+104
+61
+234
+125
+52
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+251
+192
+154
+249
+174
+124
+246
+156
+93
+247
+150
+84
+249
+146
+83
+249
+152
+92
+251
+168
+115
+249
+189
+146
+97
+98
+96
+89
+75
+66
+225
+124
+48
+227
+126
+50
+224
+123
+55
+234
+126
+45
+125
+90
+64
+58
+69
+70
+227
+196
+175
+253
+212
+188
+250
+200
+166
+251
+192
+154
+249
+189
+146
+250
+197
+158
+251
+209
+178
+255
+215
+190
+97
+98
+96
+89
+75
+66
+227
+126
+50
+227
+126
+50
+224
+123
+55
+234
+126
+45
+125
+90
+64
+43
+57
+62
+43
+57
+62
+135
+94
+64
+234
+125
+52
+224
+123
+55
+227
+126
+50
+227
+126
+50
+89
+75
+66
+101
+100
+92
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+137
+127
+115
+69
+69
+61
+212
+120
+56
+227
+126
+50
+224
+123
+55
+234
+126
+45
+155
+100
+63
+43
+57
+62
+207
+178
+158
+255
+215
+190
+250
+200
+166
+251
+192
+154
+251
+192
+154
+250
+197
+158
+251
+209
+178
+255
+215
+190
+109
+106
+99
+89
+75
+66
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+126
+45
+139
+96
+61
+55
+66
+67
+250
+200
+166
+249
+174
+124
+249
+152
+92
+247
+130
+60
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+123
+41
+247
+143
+74
+249
+159
+103
+252
+185
+144
+55
+48
+48
+59
+50
+39
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+156
+125
+62
+101
+83
+47
+59
+50
+39
+209
+171
+139
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+219
+212
+208
+137
+127
+115
+101
+100
+92
+120
+114
+108
+186
+181
+179
+152
+147
+147
+55
+48
+48
+227
+196
+175
+255
+215
+190
+238
+205
+179
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+97
+98
+96
+255
+215
+190
+253
+204
+176
+251
+192
+154
+249
+189
+146
+249
+189
+146
+250
+197
+158
+251
+209
+178
+234
+204
+183
+70
+79
+77
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+161
+127
+40
+75
+74
+61
+41
+58
+57
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+168
+127
+42
+168
+127
+42
+168
+127
+42
+171
+129
+45
+75
+74
+61
+41
+58
+57
+88
+82
+59
+168
+127
+42
+158
+125
+46
+158
+125
+46
+171
+129
+45
+88
+82
+59
+77
+85
+81
+245
+212
+186
+251
+209
+178
+250
+197
+158
+249
+189
+146
+249
+189
+146
+250
+197
+158
+251
+209
+178
+245
+212
+186
+84
+85
+82
+88
+82
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+88
+82
+59
+43
+57
+62
+48
+58
+59
+129
+106
+52
+168
+127
+42
+158
+125
+46
+168
+127
+42
+145
+114
+49
+56
+64
+60
+161
+144
+134
+255
+215
+190
+250
+200
+166
+251
+192
+154
+249
+189
+146
+251
+192
+154
+250
+200
+166
+255
+215
+190
+187
+166
+150
+51
+62
+63
+137
+110
+49
+168
+127
+42
+158
+125
+46
+168
+127
+42
+145
+114
+49
+51
+62
+63
+137
+127
+115
+58
+69
+70
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+65
+67
+64
+91
+92
+89
+55
+66
+67
+129
+106
+52
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+168
+127
+42
+168
+127
+42
+168
+127
+42
+158
+125
+46
+63
+69
+60
+137
+127
+115
+172
+150
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+227
+126
+50
+173
+106
+60
+48
+58
+59
+187
+166
+150
+255
+215
+190
+250
+200
+166
+251
+192
+154
+249
+189
+146
+251
+192
+154
+250
+200
+166
+255
+215
+190
+161
+144
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+234
+125
+52
+173
+106
+60
+48
+58
+59
+41
+58
+57
+118
+86
+65
+234
+126
+45
+224
+123
+55
+224
+123
+55
+234
+125
+52
+95
+78
+64
+91
+92
+89
+255
+215
+190
+253
+204
+176
+251
+192
+154
+252
+185
+144
+252
+185
+144
+251
+192
+154
+253
+204
+176
+245
+212
+186
+91
+92
+89
+106
+82
+65
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+125
+52
+112
+85
+63
+41
+58
+57
+48
+58
+59
+173
+106
+60
+234
+125
+52
+224
+123
+55
+227
+126
+50
+199
+115
+54
+56
+64
+60
+161
+144
+134
+255
+215
+190
+250
+200
+166
+251
+192
+154
+249
+189
+146
+251
+192
+154
+250
+200
+166
+255
+215
+190
+187
+166
+150
+48
+58
+59
+183
+110
+59
+234
+125
+52
+224
+123
+55
+227
+126
+50
+194
+112
+58
+56
+64
+60
+101
+100
+92
+56
+64
+60
+188
+112
+56
+227
+126
+50
+224
+123
+55
+227
+126
+50
+183
+110
+59
+51
+62
+63
+176
+156
+141
+255
+215
+190
+253
+212
+188
+251
+209
+178
+253
+212
+188
+217
+187
+166
+55
+66
+67
+146
+97
+64
+234
+126
+45
+224
+123
+55
+227
+126
+50
+214
+121
+50
+69
+69
+61
+137
+127
+115
+255
+215
+190
+253
+204
+176
+251
+192
+154
+249
+189
+146
+249
+189
+146
+250
+200
+166
+253
+212
+188
+217
+187
+166
+51
+62
+63
+155
+100
+63
+234
+125
+52
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+250
+197
+158
+249
+174
+124
+249
+159
+103
+249
+152
+92
+249
+152
+92
+249
+159
+103
+249
+174
+124
+250
+197
+158
+91
+92
+89
+95
+78
+64
+227
+126
+50
+227
+126
+50
+224
+123
+55
+234
+125
+52
+125
+90
+64
+70
+79
+77
+234
+204
+183
+251
+209
+178
+250
+197
+158
+249
+189
+146
+252
+185
+144
+251
+192
+154
+253
+204
+176
+255
+215
+190
+120
+114
+108
+81
+73
+62
+224
+123
+55
+227
+126
+50
+224
+123
+55
+234
+126
+45
+135
+94
+64
+41
+58
+57
+41
+58
+57
+135
+94
+64
+234
+125
+52
+224
+123
+55
+227
+126
+50
+227
+126
+50
+89
+75
+66
+101
+100
+92
+253
+212
+188
+253
+212
+188
+251
+209
+178
+251
+209
+178
+255
+215
+190
+137
+127
+115
+76
+70
+64
+214
+121
+50
+227
+126
+50
+224
+123
+55
+234
+125
+52
+146
+97
+64
+51
+62
+63
+227
+196
+175
+253
+212
+188
+250
+197
+158
+249
+189
+146
+249
+189
+146
+251
+192
+154
+253
+204
+176
+255
+215
+190
+120
+114
+108
+81
+73
+62
+227
+126
+50
+227
+126
+50
+224
+123
+55
+234
+126
+45
+139
+96
+61
+51
+62
+63
+250
+200
+166
+249
+174
+124
+249
+152
+92
+247
+130
+60
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+123
+41
+250
+139
+73
+249
+159
+103
+252
+185
+144
+55
+48
+48
+59
+50
+39
+161
+127
+40
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+154
+125
+71
+170
+137
+67
+108
+87
+46
+59
+50
+39
+192
+155
+91
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+186
+181
+179
+47
+40
+38
+65
+58
+56
+245
+212
+186
+255
+215
+190
+238
+205
+179
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+88
+82
+59
+84
+85
+82
+253
+212
+188
+251
+209
+178
+250
+197
+158
+251
+192
+154
+251
+192
+154
+250
+200
+166
+253
+212
+188
+234
+204
+183
+63
+74
+74
+100
+89
+56
+171
+129
+45
+158
+125
+46
+158
+125
+46
+161
+127
+40
+75
+74
+61
+41
+58
+57
+111
+94
+57
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+111
+94
+57
+56
+64
+60
+43
+57
+62
+83
+78
+61
+168
+127
+42
+158
+125
+46
+158
+125
+46
+171
+129
+45
+95
+87
+59
+70
+79
+77
+245
+212
+186
+251
+209
+178
+250
+197
+158
+251
+192
+154
+251
+192
+154
+250
+197
+158
+251
+209
+178
+245
+212
+186
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+88
+82
+59
+43
+57
+62
+48
+58
+59
+129
+106
+52
+168
+127
+42
+158
+125
+46
+158
+125
+46
+152
+119
+47
+56
+64
+60
+161
+144
+134
+255
+215
+190
+253
+204
+176
+251
+192
+154
+249
+189
+146
+251
+192
+154
+250
+200
+166
+255
+215
+190
+176
+156
+141
+51
+62
+63
+137
+110
+49
+168
+127
+42
+158
+125
+46
+168
+127
+42
+145
+114
+49
+51
+62
+63
+137
+127
+115
+58
+69
+70
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+63
+69
+60
+91
+92
+89
+55
+66
+67
+123
+102
+54
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+100
+89
+56
+48
+58
+59
+187
+166
+150
+176
+156
+141
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+227
+126
+50
+183
+110
+59
+51
+62
+63
+176
+156
+141
+255
+215
+190
+250
+200
+166
+251
+192
+154
+251
+192
+154
+250
+197
+158
+253
+204
+176
+255
+215
+190
+146
+135
+124
+62
+63
+61
+209
+117
+53
+227
+126
+50
+224
+123
+55
+234
+125
+52
+163
+104
+61
+48
+58
+59
+41
+58
+57
+112
+85
+63
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+125
+52
+106
+82
+65
+84
+85
+82
+255
+215
+190
+251
+209
+178
+250
+197
+158
+249
+189
+146
+249
+189
+146
+250
+197
+158
+251
+209
+178
+238
+205
+179
+84
+85
+82
+106
+82
+65
+234
+125
+52
+224
+123
+55
+227
+126
+50
+227
+126
+50
+106
+82
+65
+41
+58
+57
+48
+58
+59
+173
+106
+60
+227
+126
+50
+224
+123
+55
+227
+126
+50
+199
+115
+54
+62
+63
+61
+146
+135
+124
+255
+215
+190
+253
+204
+176
+251
+192
+154
+249
+189
+146
+251
+192
+154
+250
+200
+166
+255
+215
+190
+176
+156
+141
+51
+62
+63
+183
+110
+59
+227
+126
+50
+224
+123
+55
+227
+126
+50
+194
+112
+58
+56
+64
+60
+101
+100
+92
+56
+64
+60
+188
+112
+56
+227
+126
+50
+224
+123
+55
+227
+126
+50
+183
+110
+59
+51
+62
+63
+176
+156
+141
+253
+212
+188
+253
+204
+176
+250
+200
+166
+253
+204
+176
+217
+187
+166
+55
+66
+67
+146
+97
+64
+234
+125
+52
+224
+123
+55
+227
+126
+50
+214
+121
+50
+76
+70
+64
+120
+114
+108
+255
+215
+190
+253
+204
+176
+250
+197
+158
+251
+192
+154
+251
+192
+154
+250
+200
+166
+253
+212
+188
+207
+178
+158
+48
+58
+59
+163
+104
+61
+227
+126
+50
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+250
+200
+166
+248
+180
+134
+251
+168
+115
+247
+165
+111
+247
+165
+111
+251
+168
+115
+248
+180
+134
+250
+200
+166
+91
+92
+89
+89
+75
+66
+225
+124
+48
+227
+126
+50
+224
+123
+55
+234
+126
+45
+125
+90
+64
+63
+74
+74
+227
+196
+175
+251
+209
+178
+250
+197
+158
+249
+189
+146
+249
+189
+146
+250
+197
+158
+253
+204
+176
+255
+215
+190
+109
+106
+99
+89
+75
+66
+225
+124
+48
+227
+126
+50
+224
+123
+55
+234
+125
+52
+125
+90
+64
+43
+57
+62
+41
+58
+57
+135
+94
+64
+234
+126
+45
+224
+123
+55
+227
+126
+50
+227
+126
+50
+89
+75
+66
+101
+100
+92
+253
+212
+188
+253
+204
+176
+250
+200
+166
+250
+200
+166
+251
+209
+178
+137
+127
+115
+76
+70
+64
+214
+121
+50
+227
+126
+50
+224
+123
+55
+234
+125
+52
+155
+100
+63
+43
+57
+62
+217
+187
+166
+253
+212
+188
+250
+200
+166
+251
+192
+154
+249
+189
+146
+250
+197
+158
+253
+204
+176
+255
+215
+190
+120
+114
+108
+81
+73
+62
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+125
+52
+139
+96
+61
+55
+66
+67
+250
+200
+166
+249
+174
+124
+249
+152
+92
+247
+130
+60
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+123
+41
+250
+139
+73
+249
+159
+103
+248
+180
+134
+76
+70
+64
+47
+40
+38
+152
+119
+47
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+156
+125
+62
+154
+125
+71
+170
+137
+67
+101
+83
+47
+59
+50
+39
+170
+137
+67
+255
+238
+227
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+152
+147
+147
+35
+31
+30
+24
+22
+23
+115
+102
+92
+255
+215
+190
+255
+215
+190
+238
+205
+179
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+171
+129
+45
+105
+93
+60
+58
+69
+70
+227
+196
+175
+255
+215
+190
+253
+204
+176
+250
+200
+166
+250
+200
+166
+253
+204
+176
+255
+215
+190
+207
+178
+158
+48
+58
+59
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+69
+69
+61
+43
+57
+62
+100
+89
+56
+171
+129
+45
+158
+125
+46
+161
+127
+40
+158
+125
+46
+75
+74
+61
+48
+58
+59
+56
+64
+60
+56
+64
+60
+56
+64
+60
+56
+64
+60
+56
+64
+60
+56
+64
+60
+56
+64
+60
+56
+64
+60
+56
+64
+60
+56
+64
+60
+56
+64
+60
+56
+64
+60
+56
+64
+60
+48
+58
+59
+101
+100
+92
+91
+92
+89
+75
+74
+61
+168
+127
+42
+158
+125
+46
+158
+125
+46
+171
+129
+45
+111
+94
+57
+55
+66
+67
+227
+196
+175
+255
+215
+190
+253
+204
+176
+250
+200
+166
+250
+200
+166
+253
+204
+176
+255
+215
+190
+227
+196
+175
+51
+62
+63
+105
+93
+60
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+48
+58
+59
+48
+58
+59
+123
+102
+54
+168
+127
+42
+158
+125
+46
+161
+127
+40
+158
+125
+46
+69
+69
+61
+120
+114
+108
+255
+215
+190
+251
+209
+178
+250
+200
+166
+250
+197
+158
+250
+200
+166
+251
+209
+178
+255
+215
+190
+146
+135
+124
+56
+64
+60
+152
+119
+47
+168
+127
+42
+158
+125
+46
+168
+127
+42
+145
+114
+49
+51
+62
+63
+137
+127
+115
+58
+69
+70
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+63
+69
+60
+109
+106
+99
+63
+74
+74
+111
+94
+57
+171
+129
+45
+158
+125
+46
+161
+127
+40
+152
+119
+47
+69
+69
+61
+51
+62
+63
+56
+64
+60
+56
+64
+60
+56
+64
+60
+56
+64
+60
+56
+64
+60
+56
+64
+60
+56
+64
+60
+56
+64
+60
+56
+64
+60
+56
+64
+60
+56
+64
+60
+56
+64
+60
+51
+62
+63
+48
+58
+59
+120
+114
+108
+245
+212
+186
+172
+150
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+227
+126
+50
+209
+117
+53
+62
+63
+61
+137
+127
+115
+255
+215
+190
+251
+209
+178
+250
+200
+166
+250
+200
+166
+250
+200
+166
+253
+212
+188
+255
+215
+190
+109
+106
+99
+81
+73
+62
+224
+123
+55
+227
+126
+50
+224
+123
+55
+234
+125
+52
+155
+100
+63
+48
+58
+59
+43
+57
+62
+95
+78
+64
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+125
+52
+125
+90
+64
+63
+74
+74
+227
+196
+175
+253
+212
+188
+250
+200
+166
+250
+197
+158
+250
+197
+158
+253
+204
+176
+255
+215
+190
+227
+196
+175
+55
+66
+67
+125
+90
+64
+234
+125
+52
+224
+123
+55
+224
+123
+55
+227
+126
+50
+89
+75
+66
+48
+58
+59
+48
+58
+59
+155
+100
+63
+234
+126
+45
+224
+123
+55
+227
+126
+50
+214
+121
+50
+76
+70
+64
+120
+114
+108
+255
+215
+190
+251
+209
+178
+250
+200
+166
+250
+197
+158
+250
+200
+166
+251
+209
+178
+255
+215
+190
+137
+127
+115
+62
+63
+61
+209
+117
+53
+227
+126
+50
+224
+123
+55
+227
+126
+50
+194
+112
+58
+56
+64
+60
+97
+98
+96
+56
+64
+60
+188
+112
+56
+227
+126
+50
+224
+123
+55
+227
+126
+50
+183
+110
+59
+48
+58
+59
+176
+156
+141
+251
+209
+178
+250
+200
+166
+250
+197
+158
+250
+200
+166
+227
+196
+175
+63
+74
+74
+135
+94
+64
+234
+126
+45
+224
+123
+55
+227
+126
+50
+227
+126
+50
+95
+78
+64
+91
+92
+89
+253
+212
+188
+253
+212
+188
+250
+200
+166
+250
+200
+166
+250
+200
+166
+251
+209
+178
+255
+215
+190
+172
+150
+134
+56
+64
+60
+188
+112
+56
+227
+126
+50
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+251
+209
+178
+251
+192
+154
+250
+176
+132
+249
+174
+124
+249
+174
+124
+248
+180
+134
+251
+192
+154
+251
+209
+178
+109
+106
+99
+76
+70
+64
+214
+121
+50
+227
+126
+50
+224
+123
+55
+234
+126
+45
+146
+97
+64
+43
+57
+62
+217
+187
+166
+255
+215
+190
+253
+204
+176
+250
+197
+158
+250
+197
+158
+250
+200
+166
+253
+212
+188
+245
+212
+186
+70
+79
+77
+106
+82
+65
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+125
+52
+112
+85
+63
+51
+62
+63
+51
+62
+63
+135
+94
+64
+234
+126
+45
+224
+123
+55
+227
+126
+50
+227
+126
+50
+89
+75
+66
+101
+100
+92
+245
+212
+186
+250
+200
+166
+251
+192
+154
+250
+197
+158
+253
+204
+176
+146
+135
+124
+65
+67
+64
+209
+117
+53
+227
+126
+50
+224
+123
+55
+234
+125
+52
+173
+106
+60
+48
+58
+59
+187
+166
+150
+255
+215
+190
+253
+204
+176
+250
+200
+166
+250
+197
+158
+250
+200
+166
+253
+212
+188
+255
+215
+190
+84
+85
+82
+95
+78
+64
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+125
+52
+139
+96
+61
+55
+66
+67
+250
+200
+166
+249
+174
+124
+249
+152
+92
+247
+130
+60
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+109
+10
+247
+111
+26
+247
+123
+41
+248
+138
+64
+249
+152
+92
+249
+174
+124
+121
+100
+85
+35
+31
+30
+108
+87
+46
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+156
+125
+62
+154
+125
+71
+154
+125
+71
+171
+129
+45
+85
+71
+43
+71
+60
+43
+171
+129
+45
+224
+207
+180
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+237
+233
+225
+174
+168
+167
+81
+77
+76
+24
+22
+23
+35
+31
+30
+35
+31
+30
+187
+166
+150
+255
+215
+190
+255
+215
+190
+234
+204
+183
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+129
+106
+52
+51
+62
+63
+176
+156
+141
+255
+215
+190
+255
+215
+190
+253
+212
+188
+253
+212
+188
+255
+215
+190
+255
+215
+190
+146
+135
+124
+51
+62
+63
+145
+114
+49
+168
+127
+42
+158
+125
+46
+158
+125
+46
+152
+119
+47
+56
+64
+60
+43
+57
+62
+83
+78
+61
+168
+127
+42
+158
+125
+46
+158
+125
+46
+168
+127
+42
+88
+82
+59
+48
+58
+59
+146
+135
+124
+161
+144
+134
+161
+144
+134
+161
+144
+134
+161
+144
+134
+161
+144
+134
+161
+144
+134
+161
+144
+134
+161
+144
+134
+172
+150
+134
+172
+150
+134
+146
+135
+124
+146
+135
+124
+194
+173
+157
+245
+212
+186
+137
+127
+115
+63
+69
+60
+158
+125
+46
+161
+127
+40
+158
+125
+46
+168
+127
+42
+137
+110
+49
+51
+62
+63
+161
+144
+134
+255
+215
+190
+255
+215
+190
+253
+212
+188
+253
+212
+188
+255
+215
+190
+255
+215
+190
+161
+144
+134
+48
+58
+59
+137
+110
+49
+168
+127
+42
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+55
+66
+67
+51
+62
+63
+105
+93
+60
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+88
+82
+59
+70
+79
+77
+245
+212
+186
+255
+215
+190
+253
+212
+188
+251
+209
+178
+253
+212
+188
+255
+215
+190
+255
+215
+190
+91
+92
+89
+75
+74
+61
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+145
+114
+49
+51
+62
+63
+137
+127
+115
+58
+69
+70
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+63
+69
+60
+133
+120
+107
+84
+85
+82
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+75
+74
+61
+55
+66
+67
+161
+144
+134
+161
+144
+134
+161
+144
+134
+161
+144
+134
+161
+144
+134
+161
+144
+134
+161
+144
+134
+161
+144
+134
+161
+144
+134
+172
+150
+134
+172
+150
+134
+137
+127
+115
+146
+135
+124
+207
+178
+158
+245
+212
+186
+255
+215
+190
+161
+144
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+227
+126
+50
+227
+126
+50
+89
+75
+66
+76
+78
+76
+245
+212
+186
+255
+215
+190
+253
+212
+188
+253
+212
+188
+253
+212
+188
+255
+215
+190
+227
+196
+175
+58
+69
+70
+118
+86
+65
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+125
+52
+125
+90
+64
+63
+74
+74
+97
+98
+96
+76
+70
+64
+214
+121
+50
+227
+126
+50
+224
+123
+55
+234
+125
+52
+163
+104
+61
+48
+58
+59
+187
+166
+150
+255
+215
+190
+255
+215
+190
+251
+209
+178
+251
+209
+178
+255
+215
+190
+255
+215
+190
+176
+156
+141
+48
+58
+59
+173
+106
+60
+227
+126
+50
+224
+123
+55
+227
+126
+50
+212
+120
+56
+69
+69
+61
+101
+100
+92
+63
+74
+74
+125
+90
+64
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+125
+52
+106
+82
+65
+63
+74
+74
+234
+204
+183
+255
+215
+190
+253
+212
+188
+253
+212
+188
+253
+212
+188
+255
+215
+190
+245
+212
+186
+70
+79
+77
+89
+75
+66
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+194
+112
+58
+56
+64
+60
+101
+100
+92
+56
+64
+60
+188
+112
+56
+227
+126
+50
+224
+123
+55
+234
+125
+52
+183
+110
+59
+51
+62
+63
+176
+156
+141
+253
+204
+176
+251
+192
+154
+251
+192
+154
+251
+192
+154
+250
+200
+166
+77
+85
+81
+106
+82
+65
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+126
+45
+135
+94
+64
+51
+62
+63
+217
+187
+166
+255
+215
+190
+255
+215
+190
+253
+212
+188
+253
+212
+188
+255
+215
+190
+255
+215
+190
+109
+106
+99
+76
+70
+64
+224
+123
+55
+227
+126
+50
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+255
+215
+190
+250
+200
+166
+251
+192
+154
+252
+185
+144
+252
+185
+144
+251
+192
+154
+250
+200
+166
+255
+215
+190
+146
+135
+124
+56
+64
+60
+199
+115
+54
+227
+126
+50
+224
+123
+55
+227
+126
+50
+194
+112
+58
+51
+62
+63
+146
+135
+124
+255
+215
+190
+255
+215
+190
+251
+209
+178
+251
+209
+178
+253
+212
+188
+255
+215
+190
+194
+173
+157
+43
+57
+62
+146
+97
+64
+234
+126
+45
+224
+123
+55
+227
+126
+50
+227
+126
+50
+89
+75
+66
+77
+85
+81
+63
+74
+74
+135
+94
+64
+234
+125
+52
+224
+123
+55
+227
+126
+50
+227
+126
+50
+89
+75
+66
+101
+100
+92
+251
+209
+178
+250
+197
+158
+249
+189
+146
+249
+189
+146
+250
+200
+166
+172
+150
+134
+56
+64
+60
+188
+112
+56
+227
+126
+50
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+120
+114
+108
+255
+215
+190
+255
+215
+190
+253
+212
+188
+251
+209
+178
+253
+212
+188
+255
+215
+190
+217
+187
+166
+51
+62
+63
+135
+94
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+234
+126
+45
+139
+96
+61
+55
+66
+67
+250
+200
+166
+249
+174
+124
+249
+152
+92
+247
+130
+60
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+111
+26
+247
+118
+39
+247
+130
+60
+247
+150
+84
+251
+168
+115
+187
+140
+108
+24
+22
+23
+59
+50
+39
+168
+127
+42
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+156
+125
+62
+154
+125
+71
+154
+125
+71
+154
+125
+71
+156
+125
+62
+158
+125
+46
+47
+40
+38
+108
+87
+46
+158
+125
+46
+195
+167
+113
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+219
+212
+208
+164
+158
+157
+109
+106
+99
+65
+58
+56
+24
+22
+23
+24
+22
+23
+94
+60
+47
+178
+86
+46
+59
+50
+39
+150
+125
+114
+255
+215
+190
+255
+215
+190
+234
+204
+183
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+69
+69
+61
+84
+85
+82
+234
+204
+183
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+217
+187
+166
+55
+66
+67
+83
+78
+61
+168
+127
+42
+158
+125
+46
+158
+125
+46
+171
+129
+45
+123
+102
+54
+51
+62
+63
+76
+78
+76
+56
+64
+60
+152
+119
+47
+168
+127
+42
+158
+125
+46
+168
+127
+42
+129
+106
+52
+48
+58
+59
+161
+144
+134
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+217
+187
+166
+133
+120
+107
+77
+85
+81
+77
+85
+81
+146
+135
+124
+245
+212
+186
+176
+156
+141
+51
+62
+63
+137
+110
+49
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+75
+74
+61
+63
+74
+74
+227
+196
+175
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+234
+204
+183
+76
+78
+76
+75
+74
+61
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+88
+82
+59
+77
+85
+81
+77
+85
+81
+88
+82
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+129
+106
+52
+48
+58
+59
+146
+135
+124
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+172
+150
+134
+48
+58
+59
+117
+98
+55
+168
+127
+42
+158
+125
+46
+158
+125
+46
+168
+127
+42
+145
+114
+49
+51
+62
+63
+137
+127
+115
+58
+69
+70
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+63
+69
+60
+146
+135
+124
+120
+114
+108
+69
+69
+61
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+111
+94
+57
+51
+62
+63
+176
+156
+141
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+194
+173
+157
+120
+114
+108
+70
+79
+77
+84
+85
+82
+161
+144
+134
+255
+215
+190
+255
+215
+190
+161
+144
+134
+56
+64
+60
+199
+115
+54
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+126
+45
+155
+100
+63
+41
+58
+57
+161
+144
+134
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+137
+127
+115
+48
+58
+59
+183
+110
+59
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+89
+75
+66
+97
+98
+96
+172
+150
+134
+48
+58
+59
+183
+110
+59
+227
+126
+50
+224
+123
+55
+227
+126
+50
+214
+121
+50
+76
+70
+64
+84
+85
+82
+234
+204
+183
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+234
+204
+183
+77
+85
+81
+81
+73
+62
+224
+123
+55
+227
+126
+50
+224
+123
+55
+234
+125
+52
+173
+106
+60
+48
+58
+59
+176
+156
+141
+97
+98
+96
+95
+78
+64
+227
+126
+50
+227
+126
+50
+224
+123
+55
+234
+125
+52
+173
+106
+60
+48
+58
+59
+146
+135
+124
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+161
+144
+134
+41
+58
+57
+155
+100
+63
+234
+126
+45
+224
+123
+55
+224
+123
+55
+227
+126
+50
+194
+112
+58
+56
+64
+60
+101
+100
+92
+56
+64
+60
+188
+112
+56
+227
+126
+50
+224
+123
+55
+227
+126
+50
+183
+110
+59
+51
+62
+63
+176
+156
+141
+250
+200
+166
+249
+189
+146
+252
+185
+144
+249
+189
+146
+250
+200
+166
+120
+114
+108
+69
+69
+61
+214
+121
+50
+227
+126
+50
+224
+123
+55
+227
+126
+50
+199
+115
+54
+62
+63
+61
+101
+100
+92
+245
+212
+186
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+187
+166
+150
+43
+57
+62
+135
+94
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+255
+215
+190
+253
+212
+188
+253
+204
+176
+250
+200
+166
+250
+200
+166
+253
+204
+176
+253
+212
+188
+255
+215
+190
+187
+166
+150
+41
+58
+57
+155
+100
+63
+234
+125
+52
+224
+123
+55
+227
+126
+50
+227
+126
+50
+95
+78
+64
+58
+69
+70
+227
+196
+175
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+245
+212
+186
+91
+92
+89
+62
+63
+61
+209
+117
+53
+227
+126
+50
+224
+123
+55
+227
+126
+50
+199
+115
+54
+62
+63
+61
+133
+120
+107
+77
+85
+81
+135
+94
+64
+234
+126
+45
+224
+123
+55
+227
+126
+50
+227
+126
+50
+89
+75
+66
+101
+100
+92
+253
+204
+176
+251
+192
+154
+252
+185
+144
+252
+185
+144
+251
+192
+154
+212
+173
+150
+48
+58
+59
+155
+100
+63
+234
+126
+45
+224
+123
+55
+224
+123
+55
+234
+125
+52
+118
+86
+65
+51
+62
+63
+207
+178
+158
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+109
+106
+99
+56
+64
+60
+199
+115
+54
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+125
+52
+139
+96
+61
+55
+66
+67
+250
+200
+166
+249
+174
+124
+249
+152
+92
+247
+130
+60
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+111
+26
+246
+116
+28
+247
+130
+53
+247
+143
+74
+249
+159
+103
+248
+180
+134
+89
+75
+66
+24
+22
+23
+85
+71
+43
+171
+129
+45
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+156
+125
+62
+154
+125
+71
+154
+125
+71
+154
+125
+71
+156
+125
+62
+175
+132
+40
+85
+71
+43
+47
+40
+38
+158
+125
+46
+158
+125
+46
+170
+137
+67
+237
+233
+225
+253
+255
+252
+253
+255
+252
+253
+255
+252
+207
+202
+200
+164
+158
+157
+146
+135
+124
+120
+114
+108
+89
+84
+82
+65
+58
+56
+47
+40
+38
+24
+22
+23
+24
+22
+23
+35
+31
+30
+94
+60
+47
+178
+86
+46
+226
+110
+35
+241
+100
+24
+144
+77
+47
+65
+58
+56
+253
+212
+188
+255
+215
+190
+238
+205
+179
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+129
+106
+52
+48
+58
+59
+101
+100
+92
+217
+187
+166
+245
+212
+186
+245
+212
+186
+194
+173
+157
+76
+78
+76
+56
+64
+60
+145
+114
+49
+168
+127
+42
+158
+125
+46
+158
+125
+46
+171
+129
+45
+88
+82
+59
+77
+85
+81
+176
+156
+141
+48
+58
+59
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+95
+87
+59
+41
+58
+57
+137
+127
+115
+227
+196
+175
+255
+215
+190
+255
+215
+190
+255
+215
+190
+245
+212
+186
+207
+178
+158
+120
+114
+108
+48
+58
+59
+62
+63
+61
+100
+89
+56
+95
+87
+59
+51
+62
+63
+120
+114
+108
+227
+196
+175
+55
+66
+67
+100
+89
+56
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+137
+110
+49
+51
+62
+63
+84
+85
+82
+207
+178
+158
+245
+212
+186
+245
+212
+186
+207
+178
+158
+97
+98
+96
+51
+62
+63
+137
+110
+49
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+88
+82
+59
+91
+92
+89
+120
+114
+108
+63
+69
+60
+158
+125
+46
+161
+127
+40
+158
+125
+46
+158
+125
+46
+168
+127
+42
+88
+82
+59
+43
+57
+62
+161
+144
+134
+227
+196
+175
+253
+212
+188
+234
+204
+183
+161
+144
+134
+51
+62
+63
+75
+74
+61
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+145
+114
+49
+51
+62
+63
+137
+127
+115
+58
+69
+70
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+63
+69
+60
+146
+135
+124
+176
+156
+141
+48
+58
+59
+137
+110
+49
+171
+129
+45
+158
+125
+46
+161
+127
+40
+158
+125
+46
+75
+74
+61
+43
+57
+62
+161
+144
+134
+234
+204
+183
+255
+215
+190
+255
+215
+190
+255
+215
+190
+245
+212
+186
+194
+173
+157
+109
+106
+99
+43
+57
+62
+69
+69
+61
+105
+93
+60
+88
+82
+59
+48
+58
+59
+146
+135
+124
+255
+215
+190
+161
+144
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+225
+124
+48
+95
+78
+64
+43
+57
+62
+161
+144
+134
+234
+204
+183
+245
+212
+186
+227
+196
+175
+146
+135
+124
+35
+56
+60
+125
+90
+64
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+125
+52
+188
+112
+56
+51
+62
+63
+161
+144
+134
+234
+204
+183
+51
+62
+63
+125
+90
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+234
+125
+52
+163
+104
+61
+43
+57
+62
+97
+98
+96
+207
+178
+158
+245
+212
+186
+245
+212
+186
+207
+178
+158
+91
+92
+89
+48
+58
+59
+173
+106
+60
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+126
+45
+118
+86
+65
+55
+66
+67
+234
+204
+183
+146
+135
+124
+56
+64
+60
+194
+112
+58
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+125
+52
+112
+85
+63
+35
+56
+60
+146
+135
+124
+227
+196
+175
+253
+212
+188
+234
+204
+183
+161
+144
+134
+43
+57
+62
+95
+78
+64
+225
+124
+48
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+194
+112
+58
+56
+64
+60
+101
+100
+92
+56
+64
+60
+188
+112
+56
+227
+126
+50
+224
+123
+55
+227
+126
+50
+183
+110
+59
+51
+62
+63
+176
+156
+141
+250
+197
+158
+252
+185
+144
+248
+180
+134
+248
+180
+134
+251
+192
+154
+172
+150
+134
+48
+58
+59
+173
+106
+60
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+126
+45
+139
+96
+61
+41
+58
+57
+120
+114
+108
+217
+187
+166
+245
+212
+186
+234
+204
+183
+176
+156
+141
+58
+69
+70
+81
+73
+62
+214
+121
+50
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+255
+215
+190
+255
+215
+190
+217
+187
+166
+133
+120
+107
+84
+85
+82
+91
+92
+89
+146
+135
+124
+234
+204
+183
+238
+205
+179
+63
+74
+74
+95
+78
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+227
+126
+50
+194
+112
+58
+56
+64
+60
+84
+85
+82
+194
+173
+157
+245
+212
+186
+245
+212
+186
+217
+187
+166
+109
+106
+99
+41
+58
+57
+146
+97
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+234
+126
+45
+146
+97
+64
+51
+62
+63
+187
+166
+150
+76
+78
+76
+135
+94
+64
+234
+126
+45
+224
+123
+55
+227
+126
+50
+227
+126
+50
+89
+75
+66
+97
+98
+96
+250
+200
+166
+249
+189
+146
+248
+180
+134
+248
+180
+134
+252
+185
+144
+232
+190
+161
+70
+79
+77
+112
+85
+63
+234
+126
+45
+224
+123
+55
+224
+123
+55
+227
+126
+50
+199
+115
+54
+65
+67
+64
+70
+79
+77
+187
+166
+150
+238
+205
+179
+245
+212
+186
+217
+187
+166
+133
+120
+107
+35
+56
+60
+135
+94
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+224
+123
+55
+234
+126
+45
+139
+96
+61
+55
+66
+67
+250
+200
+166
+249
+174
+124
+249
+152
+92
+247
+130
+60
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+123
+41
+247
+130
+60
+247
+150
+84
+251
+168
+115
+203
+161
+131
+55
+48
+48
+24
+22
+23
+71
+60
+43
+145
+114
+49
+171
+129
+45
+171
+129
+45
+158
+125
+46
+156
+125
+62
+154
+125
+71
+154
+125
+71
+156
+125
+62
+156
+125
+62
+171
+129
+45
+171
+129
+45
+101
+83
+47
+35
+31
+30
+123
+102
+54
+171
+129
+45
+158
+125
+46
+160
+120
+43
+224
+207
+180
+253
+255
+252
+253
+255
+252
+219
+212
+208
+47
+40
+38
+24
+22
+23
+24
+22
+23
+24
+22
+23
+24
+22
+23
+24
+22
+23
+35
+31
+30
+35
+31
+30
+24
+22
+23
+47
+40
+38
+226
+110
+35
+241
+100
+24
+226
+110
+35
+226
+110
+35
+144
+77
+47
+55
+48
+48
+238
+205
+179
+255
+215
+190
+238
+205
+179
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+123
+102
+54
+56
+64
+60
+51
+62
+63
+84
+85
+82
+84
+85
+82
+48
+58
+59
+63
+69
+60
+129
+106
+52
+168
+127
+42
+158
+125
+46
+158
+125
+46
+168
+127
+42
+145
+114
+49
+56
+64
+60
+137
+127
+115
+245
+212
+186
+84
+85
+82
+69
+69
+61
+158
+125
+46
+158
+125
+46
+158
+125
+46
+161
+127
+40
+158
+125
+46
+95
+87
+59
+48
+58
+59
+63
+74
+74
+109
+106
+99
+133
+120
+107
+133
+120
+107
+91
+92
+89
+51
+62
+63
+56
+64
+60
+100
+89
+56
+152
+119
+47
+171
+129
+45
+175
+132
+40
+100
+89
+56
+48
+58
+59
+217
+187
+166
+120
+114
+108
+63
+69
+60
+152
+119
+47
+161
+127
+40
+158
+125
+46
+158
+125
+46
+168
+127
+42
+129
+106
+52
+61
+67
+58
+51
+62
+63
+84
+85
+82
+84
+85
+82
+51
+62
+63
+56
+64
+60
+123
+102
+54
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+97
+98
+96
+187
+166
+150
+48
+58
+59
+123
+102
+54
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+158
+125
+46
+83
+78
+61
+48
+58
+59
+63
+74
+74
+91
+92
+89
+70
+79
+77
+48
+58
+59
+75
+74
+61
+152
+119
+47
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+145
+114
+49
+51
+62
+63
+137
+127
+115
+58
+69
+70
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+63
+69
+60
+146
+135
+124
+234
+204
+183
+63
+74
+74
+83
+78
+61
+168
+127
+42
+158
+125
+46
+158
+125
+46
+168
+127
+42
+152
+119
+47
+83
+78
+61
+48
+58
+59
+70
+79
+77
+109
+106
+99
+133
+120
+107
+120
+114
+108
+84
+85
+82
+48
+58
+59
+61
+67
+58
+111
+94
+57
+158
+125
+46
+171
+129
+45
+171
+129
+45
+88
+82
+59
+58
+69
+70
+238
+205
+179
+172
+150
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+212
+120
+56
+95
+78
+64
+43
+57
+62
+70
+79
+77
+84
+85
+82
+63
+74
+74
+48
+58
+59
+118
+86
+65
+225
+124
+48
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+126
+45
+112
+85
+63
+55
+66
+67
+227
+196
+175
+255
+215
+190
+120
+114
+108
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+155
+100
+63
+62
+63
+61
+51
+62
+63
+77
+85
+81
+77
+85
+81
+51
+62
+63
+62
+63
+61
+155
+100
+63
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+125
+52
+199
+115
+54
+56
+64
+60
+120
+114
+108
+255
+215
+190
+217
+187
+166
+43
+57
+62
+125
+90
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+227
+126
+50
+224
+123
+55
+106
+82
+65
+48
+58
+59
+63
+74
+74
+84
+85
+82
+70
+79
+77
+43
+57
+62
+95
+78
+64
+212
+120
+56
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+194
+112
+58
+56
+64
+60
+101
+100
+92
+56
+64
+60
+188
+112
+56
+227
+126
+50
+224
+123
+55
+234
+125
+52
+183
+110
+59
+51
+62
+63
+172
+150
+134
+251
+192
+154
+248
+180
+134
+249
+174
+124
+249
+174
+124
+248
+180
+134
+236
+186
+153
+63
+74
+74
+95
+78
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+227
+126
+50
+227
+126
+50
+135
+94
+64
+51
+62
+63
+55
+66
+67
+84
+85
+82
+70
+79
+77
+41
+58
+57
+81
+73
+62
+199
+115
+54
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+255
+215
+190
+194
+173
+157
+58
+69
+70
+62
+63
+61
+106
+82
+65
+95
+78
+64
+51
+62
+63
+91
+92
+89
+238
+205
+179
+161
+144
+134
+48
+58
+59
+183
+110
+59
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+125
+52
+173
+106
+60
+65
+67
+64
+48
+58
+59
+77
+85
+81
+84
+85
+82
+55
+66
+67
+56
+64
+60
+146
+97
+64
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+209
+117
+53
+69
+69
+61
+101
+100
+92
+227
+196
+175
+63
+74
+74
+135
+94
+64
+234
+125
+52
+224
+123
+55
+227
+126
+50
+227
+126
+50
+89
+75
+66
+101
+100
+92
+250
+197
+158
+252
+185
+144
+249
+174
+124
+249
+174
+124
+250
+176
+132
+251
+192
+154
+120
+114
+108
+62
+63
+61
+209
+117
+53
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+188
+112
+56
+76
+70
+64
+41
+58
+57
+77
+85
+81
+84
+85
+82
+58
+69
+70
+48
+58
+59
+125
+90
+64
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+234
+126
+45
+139
+96
+61
+55
+66
+67
+250
+200
+166
+249
+174
+124
+249
+152
+92
+247
+130
+60
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+243
+101
+2
+247
+103
+7
+247
+103
+7
+247
+111
+26
+247
+118
+39
+247
+130
+53
+250
+139
+73
+246
+156
+93
+249
+174
+124
+203
+161
+131
+55
+48
+48
+24
+22
+23
+35
+31
+30
+85
+71
+43
+137
+110
+49
+152
+119
+47
+168
+127
+42
+171
+129
+45
+171
+129
+45
+168
+127
+42
+152
+119
+47
+117
+98
+55
+59
+50
+39
+35
+31
+30
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+152
+119
+47
+224
+207
+180
+253
+255
+252
+253
+255
+252
+253
+255
+252
+146
+135
+124
+65
+58
+56
+35
+31
+30
+24
+22
+23
+24
+22
+23
+35
+31
+30
+35
+31
+30
+35
+31
+30
+35
+31
+30
+24
+22
+23
+83
+53
+42
+236
+108
+29
+236
+108
+29
+226
+110
+35
+94
+60
+47
+65
+58
+56
+253
+212
+188
+255
+215
+190
+238
+205
+179
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+161
+127
+40
+168
+127
+42
+145
+114
+49
+105
+93
+60
+83
+78
+61
+83
+78
+61
+111
+94
+57
+158
+125
+46
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+88
+82
+59
+51
+62
+63
+217
+187
+166
+255
+215
+190
+176
+156
+141
+43
+57
+62
+105
+93
+60
+171
+129
+45
+158
+125
+46
+158
+125
+46
+161
+127
+40
+168
+127
+42
+137
+110
+49
+88
+82
+59
+69
+69
+61
+62
+63
+61
+63
+69
+60
+75
+74
+61
+105
+93
+60
+152
+119
+47
+171
+129
+45
+168
+127
+42
+158
+125
+46
+171
+129
+45
+129
+106
+52
+48
+58
+59
+194
+173
+157
+207
+178
+158
+43
+57
+62
+100
+89
+56
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+152
+119
+47
+111
+94
+57
+83
+78
+61
+83
+78
+61
+105
+93
+60
+145
+114
+49
+168
+127
+42
+161
+127
+40
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+88
+82
+59
+84
+85
+82
+245
+212
+186
+77
+85
+81
+75
+74
+61
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+168
+127
+42
+129
+106
+52
+95
+87
+59
+81
+73
+62
+95
+87
+59
+123
+102
+54
+168
+127
+42
+168
+127
+42
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+145
+114
+49
+56
+64
+60
+137
+127
+115
+58
+69
+70
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+63
+69
+60
+137
+127
+115
+255
+215
+190
+161
+144
+134
+48
+58
+59
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+168
+127
+42
+129
+106
+52
+88
+82
+59
+69
+69
+61
+62
+63
+61
+63
+69
+60
+75
+74
+61
+117
+98
+55
+152
+119
+47
+171
+129
+45
+161
+127
+40
+158
+125
+46
+171
+129
+45
+111
+94
+57
+48
+58
+59
+227
+196
+175
+176
+156
+141
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+227
+126
+50
+227
+126
+50
+163
+104
+61
+112
+85
+63
+95
+78
+64
+118
+86
+65
+173
+106
+60
+227
+126
+50
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+125
+52
+183
+110
+59
+51
+62
+63
+133
+120
+107
+255
+215
+190
+255
+215
+190
+217
+187
+166
+51
+62
+63
+106
+82
+65
+234
+126
+45
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+126
+45
+199
+115
+54
+135
+94
+64
+95
+78
+64
+95
+78
+64
+135
+94
+64
+199
+115
+54
+234
+125
+52
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+126
+45
+106
+82
+65
+51
+62
+63
+217
+187
+166
+255
+215
+190
+255
+215
+190
+120
+114
+108
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+227
+126
+50
+173
+106
+60
+118
+86
+65
+95
+78
+64
+112
+85
+63
+163
+104
+61
+227
+126
+50
+227
+126
+50
+227
+126
+50
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+194
+112
+58
+56
+64
+60
+101
+100
+92
+56
+64
+60
+188
+112
+56
+227
+126
+50
+224
+123
+55
+227
+126
+50
+183
+110
+59
+51
+62
+63
+172
+150
+134
+252
+185
+144
+249
+174
+124
+247
+165
+111
+247
+165
+111
+249
+174
+124
+252
+185
+144
+154
+133
+118
+48
+58
+59
+163
+104
+61
+234
+126
+45
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+125
+52
+188
+112
+56
+125
+90
+64
+95
+78
+64
+106
+82
+65
+155
+100
+63
+224
+123
+55
+234
+125
+52
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+253
+212
+188
+91
+92
+89
+69
+69
+61
+194
+112
+58
+234
+126
+45
+234
+126
+45
+163
+104
+61
+51
+62
+63
+137
+127
+115
+238
+205
+179
+63
+74
+74
+89
+75
+66
+227
+126
+50
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+209
+117
+53
+146
+97
+64
+106
+82
+65
+95
+78
+64
+125
+90
+64
+194
+112
+58
+234
+126
+45
+227
+126
+50
+224
+123
+55
+227
+126
+50
+234
+126
+45
+125
+90
+64
+41
+58
+57
+194
+173
+157
+238
+205
+179
+63
+74
+74
+135
+94
+64
+234
+125
+52
+224
+123
+55
+227
+126
+50
+227
+126
+50
+89
+75
+66
+101
+100
+92
+251
+192
+154
+250
+176
+132
+251
+168
+115
+247
+165
+111
+249
+174
+124
+245
+179
+138
+195
+157
+134
+41
+58
+57
+135
+94
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+224
+123
+55
+234
+125
+52
+214
+121
+50
+146
+97
+64
+106
+82
+65
+95
+78
+64
+125
+90
+64
+183
+110
+59
+227
+126
+50
+227
+126
+50
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+234
+125
+52
+139
+96
+61
+55
+66
+67
+250
+200
+166
+249
+174
+124
+249
+152
+92
+247
+130
+60
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+118
+39
+247
+130
+53
+247
+143
+74
+249
+159
+103
+250
+176
+132
+219
+170
+138
+115
+102
+92
+47
+40
+38
+24
+22
+23
+35
+31
+30
+47
+40
+38
+59
+50
+39
+59
+50
+39
+59
+50
+39
+59
+50
+39
+47
+40
+38
+47
+40
+38
+71
+60
+43
+137
+110
+49
+171
+129
+45
+158
+125
+46
+158
+125
+46
+152
+119
+47
+170
+137
+67
+219
+212
+208
+237
+233
+225
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+219
+212
+208
+152
+147
+147
+109
+106
+99
+65
+67
+64
+35
+31
+30
+35
+31
+30
+35
+31
+30
+35
+31
+30
+24
+22
+23
+94
+60
+47
+178
+86
+46
+109
+63
+45
+35
+31
+30
+124
+111
+99
+251
+209
+178
+251
+209
+178
+234
+204
+183
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+117
+98
+55
+129
+106
+52
+168
+127
+42
+168
+127
+42
+171
+129
+45
+168
+127
+42
+168
+127
+42
+171
+129
+45
+161
+127
+40
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+117
+98
+55
+48
+58
+59
+146
+135
+124
+255
+215
+190
+255
+215
+190
+255
+215
+190
+120
+114
+108
+51
+62
+63
+123
+102
+54
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+168
+127
+42
+158
+125
+46
+152
+119
+47
+152
+119
+47
+158
+125
+46
+168
+127
+42
+168
+127
+42
+158
+125
+46
+158
+125
+46
+168
+127
+42
+158
+125
+46
+81
+73
+62
+58
+69
+70
+227
+196
+175
+255
+215
+190
+120
+114
+108
+48
+58
+59
+129
+106
+52
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+161
+127
+40
+168
+127
+42
+168
+127
+42
+168
+127
+42
+171
+129
+45
+168
+127
+42
+168
+127
+42
+152
+119
+47
+117
+98
+55
+168
+127
+42
+158
+125
+46
+158
+125
+46
+168
+127
+42
+88
+82
+59
+84
+85
+82
+255
+215
+190
+176
+156
+141
+48
+58
+59
+111
+94
+57
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+168
+127
+42
+168
+127
+42
+168
+127
+42
+168
+127
+42
+158
+125
+46
+158
+125
+46
+145
+114
+49
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+145
+114
+49
+51
+62
+63
+137
+127
+115
+58
+69
+70
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+63
+69
+60
+137
+127
+115
+255
+215
+190
+238
+205
+179
+91
+92
+89
+56
+64
+60
+137
+110
+49
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+168
+127
+42
+158
+125
+46
+152
+119
+47
+158
+125
+46
+168
+127
+42
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+152
+119
+47
+69
+69
+61
+84
+85
+82
+245
+212
+186
+172
+150
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+227
+126
+50
+199
+115
+54
+125
+90
+64
+227
+126
+50
+227
+126
+50
+227
+126
+50
+234
+125
+52
+227
+126
+50
+234
+125
+52
+234
+125
+52
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+214
+121
+50
+81
+73
+62
+63
+74
+74
+227
+196
+175
+255
+215
+190
+253
+212
+188
+255
+215
+190
+146
+135
+124
+48
+58
+59
+146
+97
+64
+234
+126
+45
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+126
+45
+227
+126
+50
+227
+126
+50
+234
+126
+45
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+126
+45
+139
+96
+61
+48
+58
+59
+146
+135
+124
+255
+215
+190
+253
+212
+188
+255
+215
+190
+217
+187
+166
+55
+66
+67
+95
+78
+64
+225
+124
+48
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+125
+52
+227
+126
+50
+227
+126
+50
+227
+126
+50
+224
+123
+55
+234
+126
+45
+163
+104
+61
+183
+110
+59
+227
+126
+50
+224
+123
+55
+227
+126
+50
+194
+112
+58
+56
+64
+60
+97
+98
+96
+56
+64
+60
+188
+112
+56
+227
+126
+50
+224
+123
+55
+227
+126
+50
+183
+110
+59
+51
+62
+63
+167
+142
+123
+248
+180
+134
+247
+165
+111
+249
+159
+103
+246
+156
+93
+249
+159
+103
+249
+174
+124
+239
+182
+144
+77
+85
+81
+65
+67
+64
+199
+115
+54
+234
+125
+52
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+125
+52
+227
+126
+50
+227
+126
+50
+234
+125
+52
+227
+126
+50
+227
+126
+50
+135
+94
+64
+188
+112
+56
+227
+126
+50
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+146
+135
+124
+227
+196
+175
+43
+57
+62
+146
+97
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+234
+126
+45
+106
+82
+65
+70
+79
+77
+253
+212
+188
+176
+156
+141
+41
+58
+57
+125
+90
+64
+234
+126
+45
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+125
+52
+234
+125
+52
+227
+126
+50
+234
+125
+52
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+126
+45
+155
+100
+63
+48
+58
+59
+120
+114
+108
+253
+212
+188
+234
+204
+183
+63
+74
+74
+135
+94
+64
+234
+126
+45
+224
+123
+55
+227
+126
+50
+227
+126
+50
+89
+75
+66
+101
+100
+92
+252
+185
+144
+245
+169
+119
+249
+159
+103
+249
+159
+103
+247
+165
+111
+249
+174
+124
+251
+192
+154
+109
+106
+99
+62
+63
+61
+188
+112
+56
+234
+125
+52
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+125
+52
+234
+125
+52
+227
+126
+50
+234
+125
+52
+227
+126
+50
+227
+126
+50
+212
+120
+56
+199
+115
+54
+224
+123
+55
+224
+123
+55
+224
+123
+55
+234
+126
+45
+139
+96
+61
+55
+66
+67
+250
+200
+166
+249
+174
+124
+247
+150
+84
+247
+130
+60
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+243
+101
+2
+243
+101
+2
+247
+103
+7
+247
+111
+26
+247
+111
+26
+247
+123
+41
+247
+130
+60
+243
+141
+78
+249
+159
+103
+250
+176
+132
+251
+192
+154
+207
+178
+158
+154
+133
+118
+82
+69
+65
+24
+22
+23
+71
+60
+43
+101
+83
+47
+101
+83
+47
+101
+83
+47
+117
+98
+55
+145
+114
+49
+171
+129
+45
+168
+127
+42
+160
+120
+43
+160
+120
+43
+158
+125
+46
+192
+155
+91
+237
+233
+225
+81
+77
+76
+55
+48
+48
+74
+68
+68
+81
+77
+76
+89
+84
+82
+91
+92
+89
+89
+84
+82
+81
+77
+76
+65
+58
+56
+47
+40
+38
+35
+31
+30
+55
+48
+48
+115
+102
+92
+172
+150
+134
+55
+48
+48
+24
+22
+23
+24
+22
+23
+24
+22
+23
+65
+58
+56
+230
+173
+136
+251
+192
+154
+250
+197
+158
+250
+200
+166
+84
+85
+82
+88
+82
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+171
+129
+45
+83
+78
+61
+69
+69
+61
+168
+127
+42
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+171
+129
+45
+117
+98
+55
+48
+58
+59
+101
+100
+92
+238
+205
+179
+253
+204
+176
+250
+200
+166
+253
+204
+176
+238
+205
+179
+91
+92
+89
+51
+62
+63
+117
+98
+55
+171
+129
+45
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+161
+127
+40
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+171
+129
+45
+145
+114
+49
+75
+74
+61
+48
+58
+59
+172
+150
+134
+253
+212
+188
+255
+215
+190
+234
+204
+183
+84
+85
+82
+56
+64
+60
+129
+106
+52
+171
+129
+45
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+168
+127
+42
+81
+73
+62
+63
+69
+60
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+84
+85
+82
+255
+215
+190
+245
+212
+186
+109
+106
+99
+51
+62
+63
+123
+102
+54
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+161
+127
+40
+171
+129
+45
+105
+93
+60
+51
+62
+63
+137
+110
+49
+168
+127
+42
+158
+125
+46
+168
+127
+42
+145
+114
+49
+51
+62
+63
+137
+127
+115
+58
+69
+70
+111
+94
+57
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+62
+63
+61
+137
+127
+115
+255
+215
+190
+255
+215
+190
+227
+196
+175
+77
+85
+81
+56
+64
+60
+129
+106
+52
+171
+129
+45
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+161
+127
+40
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+168
+127
+42
+137
+110
+49
+69
+69
+61
+51
+62
+63
+187
+166
+150
+255
+215
+190
+172
+150
+134
+51
+62
+63
+194
+112
+58
+227
+126
+50
+224
+123
+55
+234
+125
+52
+183
+110
+59
+48
+58
+59
+155
+100
+63
+234
+126
+45
+224
+123
+55
+224
+123
+55
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+125
+52
+209
+117
+53
+89
+75
+66
+48
+58
+59
+187
+166
+150
+250
+200
+166
+250
+197
+158
+251
+192
+154
+250
+197
+158
+250
+200
+166
+109
+106
+99
+48
+58
+59
+135
+94
+64
+234
+125
+52
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+227
+126
+50
+135
+94
+64
+43
+57
+62
+120
+114
+108
+250
+200
+166
+250
+197
+158
+251
+192
+154
+250
+197
+158
+250
+200
+166
+172
+150
+134
+41
+58
+57
+106
+82
+65
+214
+121
+50
+234
+125
+52
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+224
+123
+55
+227
+126
+50
+234
+126
+45
+183
+110
+59
+48
+58
+59
+135
+94
+64
+234
+126
+45
+224
+123
+55
+227
+126
+50
+188
+112
+56
+51
+62
+63
+109
+106
+99
+51
+62
+63
+183
+110
+59
+227
+126
+50
+224
+123
+55
+234
+125
+52
+173
+106
+60
+48
+58
+59
+178
+146
+122
+245
+169
+119
+246
+156
+93
+247
+150
+84
+249
+146
+83
+247
+150
+84
+249
+159
+103
+249
+174
+124
+203
+161
+131
+58
+69
+70
+76
+70
+64
+194
+112
+58
+234
+126
+45
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+126
+45
+183
+110
+59
+48
+58
+59
+163
+104
+61
+234
+126
+45
+224
+123
+55
+227
+126
+50
+209
+117
+53
+62
+63
+61
+146
+135
+124
+217
+187
+166
+43
+57
+62
+163
+104
+61
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+126
+45
+125
+90
+64
+58
+69
+70
+234
+204
+183
+255
+215
+190
+137
+127
+115
+41
+58
+57
+118
+86
+65
+225
+124
+48
+234
+126
+45
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+126
+45
+146
+97
+64
+51
+62
+63
+97
+98
+96
+238
+205
+179
+255
+215
+190
+234
+204
+183
+63
+74
+74
+118
+86
+65
+234
+126
+45
+224
+123
+55
+227
+126
+50
+227
+126
+50
+81
+73
+62
+101
+100
+92
+250
+176
+132
+247
+165
+111
+246
+156
+93
+249
+152
+92
+249
+159
+103
+251
+168
+115
+252
+185
+144
+217
+187
+166
+58
+69
+70
+69
+69
+61
+199
+115
+54
+234
+126
+45
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+224
+123
+55
+227
+126
+50
+225
+124
+48
+81
+73
+62
+81
+73
+62
+227
+126
+50
+227
+126
+50
+224
+123
+55
+234
+126
+45
+139
+96
+61
+55
+66
+67
+250
+197
+158
+249
+174
+124
+247
+150
+84
+247
+130
+60
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+237
+95
+0
+237
+95
+0
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+237
+95
+0
+243
+101
+2
+247
+103
+7
+236
+102
+14
+247
+111
+26
+246
+116
+28
+247
+123
+41
+247
+130
+60
+243
+141
+78
+249
+159
+103
+249
+174
+124
+249
+189
+146
+253
+204
+176
+124
+111
+99
+35
+31
+30
+145
+114
+49
+175
+132
+40
+171
+129
+45
+168
+127
+42
+192
+155
+91
+216
+194
+154
+224
+207
+180
+224
+207
+180
+216
+194
+154
+216
+194
+154
+239
+227
+208
+253
+255
+252
+253
+255
+252
+186
+181
+179
+146
+135
+124
+120
+114
+108
+109
+106
+99
+95
+78
+64
+71
+60
+43
+85
+71
+43
+101
+83
+47
+108
+87
+46
+35
+31
+30
+150
+125
+114
+227
+196
+175
+255
+215
+190
+253
+212
+188
+212
+173
+150
+121
+100
+85
+95
+78
+64
+129
+102
+78
+234
+168
+124
+250
+176
+132
+250
+176
+132
+248
+180
+134
+249
+189
+146
+124
+111
+99
+62
+63
+61
+152
+119
+47
+171
+129
+45
+171
+129
+45
+145
+114
+49
+56
+64
+60
+43
+57
+62
+83
+78
+61
+152
+119
+47
+171
+129
+45
+171
+129
+45
+168
+127
+42
+168
+127
+42
+171
+129
+45
+171
+129
+45
+152
+119
+47
+95
+87
+59
+48
+58
+59
+101
+100
+92
+236
+186
+153
+251
+192
+154
+252
+185
+144
+248
+180
+134
+245
+179
+138
+249
+189
+146
+236
+186
+153
+101
+100
+92
+48
+58
+59
+88
+82
+59
+137
+110
+49
+168
+127
+42
+171
+129
+45
+168
+127
+42
+168
+127
+42
+168
+127
+42
+168
+127
+42
+171
+129
+45
+171
+129
+45
+168
+127
+42
+145
+114
+49
+100
+89
+56
+56
+64
+60
+58
+69
+70
+172
+150
+134
+250
+200
+166
+251
+192
+154
+250
+197
+158
+250
+200
+166
+217
+187
+166
+84
+85
+82
+51
+62
+63
+105
+93
+60
+158
+125
+46
+171
+129
+45
+171
+129
+45
+168
+127
+42
+168
+127
+42
+168
+127
+42
+171
+129
+45
+152
+119
+47
+83
+78
+61
+43
+57
+62
+48
+58
+59
+129
+106
+52
+175
+132
+40
+171
+129
+45
+158
+125
+46
+63
+69
+60
+120
+114
+108
+255
+215
+190
+255
+215
+190
+227
+196
+175
+84
+85
+82
+51
+62
+63
+105
+93
+60
+158
+125
+46
+171
+129
+45
+171
+129
+45
+168
+127
+42
+168
+127
+42
+168
+127
+42
+171
+129
+45
+158
+125
+46
+105
+93
+60
+48
+58
+59
+48
+58
+59
+129
+106
+52
+168
+127
+42
+158
+125
+46
+168
+127
+42
+145
+114
+49
+51
+62
+63
+172
+150
+134
+91
+92
+89
+75
+74
+61
+168
+127
+42
+171
+129
+45
+175
+132
+40
+117
+98
+55
+48
+58
+59
+176
+156
+141
+253
+204
+176
+253
+204
+176
+253
+204
+176
+217
+187
+166
+84
+85
+82
+48
+58
+59
+95
+87
+59
+145
+114
+49
+168
+127
+42
+171
+129
+45
+168
+127
+42
+168
+127
+42
+168
+127
+42
+168
+127
+42
+171
+129
+45
+171
+129
+45
+158
+125
+46
+137
+110
+49
+95
+87
+59
+51
+62
+63
+70
+79
+77
+187
+166
+150
+251
+209
+178
+251
+209
+178
+207
+178
+158
+43
+57
+62
+135
+94
+64
+238
+123
+45
+234
+126
+45
+234
+126
+45
+118
+86
+65
+35
+56
+60
+56
+64
+60
+155
+100
+63
+234
+125
+52
+234
+126
+45
+234
+125
+52
+227
+126
+50
+227
+126
+50
+234
+126
+45
+227
+126
+50
+163
+104
+61
+76
+70
+64
+51
+62
+63
+167
+142
+123
+251
+192
+154
+248
+180
+134
+249
+174
+124
+249
+174
+124
+250
+176
+132
+245
+179
+138
+236
+186
+153
+109
+106
+99
+41
+58
+57
+95
+78
+64
+183
+110
+59
+234
+125
+52
+234
+126
+45
+234
+125
+52
+227
+126
+50
+227
+126
+50
+234
+125
+52
+234
+126
+45
+227
+126
+50
+183
+110
+59
+95
+78
+64
+43
+57
+62
+124
+111
+99
+236
+186
+153
+252
+185
+144
+250
+176
+132
+249
+174
+124
+249
+174
+124
+248
+180
+134
+251
+192
+154
+154
+133
+118
+43
+57
+62
+81
+73
+62
+173
+106
+60
+227
+126
+50
+234
+126
+45
+227
+126
+50
+227
+126
+50
+227
+126
+50
+234
+126
+45
+234
+125
+52
+155
+100
+63
+56
+64
+60
+35
+56
+60
+89
+75
+66
+227
+126
+50
+234
+126
+45
+238
+128
+40
+146
+97
+64
+43
+57
+62
+176
+156
+141
+58
+69
+70
+118
+86
+65
+234
+126
+45
+234
+126
+45
+234
+126
+45
+112
+85
+63
+43
+57
+62
+210
+156
+119
+245
+162
+103
+247
+150
+84
+247
+143
+74
+248
+138
+64
+241
+138
+68
+249
+146
+83
+249
+159
+103
+250
+176
+132
+195
+157
+134
+58
+69
+70
+65
+67
+64
+155
+100
+63
+227
+126
+50
+234
+126
+45
+227
+126
+50
+227
+126
+50
+234
+125
+52
+234
+126
+45
+234
+126
+45
+173
+106
+60
+65
+67
+64
+35
+56
+60
+106
+82
+65
+234
+126
+45
+234
+126
+45
+238
+128
+40
+146
+97
+64
+43
+57
+62
+187
+166
+150
+234
+204
+183
+55
+66
+67
+106
+82
+65
+234
+126
+45
+234
+125
+52
+234
+125
+52
+224
+123
+55
+81
+73
+62
+91
+92
+89
+245
+212
+186
+253
+212
+188
+253
+212
+188
+137
+127
+115
+41
+58
+57
+89
+75
+66
+173
+106
+60
+227
+126
+50
+234
+126
+45
+227
+126
+50
+227
+126
+50
+227
+126
+50
+234
+125
+52
+234
+126
+45
+234
+125
+52
+194
+112
+58
+106
+82
+65
+43
+57
+62
+101
+100
+92
+227
+196
+175
+251
+209
+178
+251
+209
+178
+253
+212
+188
+97
+98
+96
+69
+69
+61
+209
+117
+53
+234
+126
+45
+238
+128
+40
+173
+106
+60
+51
+62
+63
+139
+115
+96
+251
+168
+115
+246
+156
+93
+247
+150
+84
+249
+146
+83
+249
+152
+92
+247
+165
+111
+248
+180
+134
+250
+200
+166
+187
+166
+150
+55
+66
+67
+69
+69
+61
+163
+104
+61
+234
+125
+52
+234
+126
+45
+234
+125
+52
+227
+126
+50
+227
+126
+50
+234
+126
+45
+234
+126
+45
+199
+115
+54
+95
+78
+64
+35
+56
+60
+81
+73
+62
+227
+126
+50
+227
+126
+50
+224
+123
+55
+234
+126
+45
+139
+96
+61
+51
+62
+63
+250
+197
+158
+245
+169
+119
+247
+150
+84
+247
+130
+60
+247
+118
+39
+235
+107
+16
+243
+101
+2
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+246
+97
+3
+237
+95
+0
+243
+101
+2
+247
+103
+7
+236
+102
+14
+247
+111
+26
+246
+116
+28
+238
+123
+45
+241
+132
+59
+247
+143
+74
+246
+156
+93
+245
+169
+119
+230
+173
+136
+47
+40
+38
+59
+50
+39
+168
+127
+42
+161
+127
+40
+160
+120
+43
+192
+155
+91
+255
+238
+227
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+239
+227
+208
+170
+137
+67
+171
+129
+45
+171
+129
+45
+171
+129
+45
+59
+50
+39
+154
+133
+118
+250
+200
+166
+250
+197
+158
+249
+189
+146
+248
+180
+134
+249
+174
+124
+247
+165
+111
+247
+165
+111
+245
+162
+103
+249
+159
+103
+245
+162
+103
+247
+165
+111
+249
+174
+124
+203
+161
+131
+55
+66
+67
+69
+69
+61
+111
+94
+57
+105
+93
+60
+69
+69
+61
+63
+74
+74
+137
+127
+115
+51
+62
+63
+62
+63
+61
+95
+87
+59
+129
+106
+52
+137
+110
+49
+137
+110
+49
+123
+102
+54
+95
+87
+59
+62
+63
+61
+51
+62
+63
+133
+120
+107
+239
+182
+144
+248
+180
+134
+245
+169
+119
+247
+165
+111
+249
+159
+103
+245
+162
+103
+251
+168
+115
+250
+176
+132
+239
+182
+144
+154
+133
+118
+63
+74
+74
+51
+62
+63
+75
+74
+61
+105
+93
+60
+123
+102
+54
+137
+110
+49
+137
+110
+49
+137
+110
+49
+123
+102
+54
+100
+89
+56
+75
+74
+61
+56
+64
+60
+55
+66
+67
+124
+111
+99
+219
+170
+138
+252
+185
+144
+250
+176
+132
+249
+174
+124
+249
+174
+124
+250
+176
+132
+252
+185
+144
+236
+186
+153
+124
+111
+99
+48
+58
+59
+63
+69
+60
+95
+87
+59
+123
+102
+54
+137
+110
+49
+137
+110
+49
+129
+106
+52
+95
+87
+59
+62
+63
+61
+55
+66
+67
+146
+135
+124
+77
+85
+81
+61
+67
+58
+105
+93
+60
+111
+94
+57
+75
+74
+61
+48
+58
+59
+194
+173
+157
+255
+215
+190
+255
+215
+190
+255
+215
+190
+234
+204
+183
+120
+114
+108
+43
+57
+62
+69
+69
+61
+100
+89
+56
+129
+106
+52
+137
+110
+49
+137
+110
+49
+129
+106
+52
+105
+93
+60
+69
+69
+61
+48
+58
+59
+77
+85
+81
+51
+62
+63
+137
+110
+49
+168
+127
+42
+158
+125
+46
+168
+127
+42
+137
+110
+49
+51
+62
+63
+187
+166
+150
+187
+166
+150
+48
+58
+59
+75
+74
+61
+111
+94
+57
+95
+87
+59
+56
+64
+60
+99
+90
+79
+239
+182
+144
+252
+185
+144
+245
+179
+138
+252
+185
+144
+249
+189
+146
+236
+186
+153
+137
+127
+115
+55
+66
+67
+56
+64
+60
+83
+78
+61
+111
+94
+57
+129
+106
+52
+137
+110
+49
+137
+110
+49
+129
+106
+52
+117
+98
+55
+95
+87
+59
+69
+69
+61
+51
+62
+63
+63
+74
+74
+133
+120
+107
+236
+186
+153
+250
+197
+158
+251
+192
+154
+251
+192
+154
+250
+197
+158
+124
+111
+99
+51
+62
+63
+112
+85
+63
+146
+97
+64
+106
+82
+65
+48
+58
+59
+120
+114
+108
+101
+100
+92
+48
+58
+59
+95
+78
+64
+146
+97
+64
+183
+110
+59
+188
+112
+56
+173
+106
+60
+139
+96
+61
+89
+75
+66
+48
+58
+59
+77
+85
+81
+186
+157
+134
+245
+179
+138
+245
+169
+119
+245
+162
+103
+246
+156
+93
+246
+156
+93
+246
+156
+93
+247
+165
+111
+249
+174
+124
+249
+189
+146
+154
+133
+118
+58
+69
+70
+51
+62
+63
+95
+78
+64
+139
+96
+61
+173
+106
+60
+183
+110
+59
+183
+110
+59
+173
+106
+60
+139
+96
+61
+95
+78
+64
+51
+62
+63
+63
+74
+74
+167
+142
+123
+249
+189
+146
+249
+174
+124
+247
+165
+111
+246
+156
+93
+246
+156
+93
+246
+156
+93
+245
+162
+103
+245
+169
+119
+245
+179
+138
+178
+146
+122
+70
+79
+77
+48
+58
+59
+89
+75
+66
+139
+96
+61
+173
+106
+60
+188
+112
+56
+183
+110
+59
+155
+100
+63
+95
+78
+64
+48
+58
+59
+101
+100
+92
+146
+135
+124
+48
+58
+59
+95
+78
+64
+146
+97
+64
+125
+90
+64
+62
+63
+61
+101
+100
+92
+245
+212
+186
+137
+127
+115
+48
+58
+59
+106
+82
+65
+146
+97
+64
+106
+82
+65
+48
+58
+59
+124
+111
+99
+247
+165
+111
+247
+150
+84
+241
+138
+68
+241
+132
+59
+247
+130
+53
+247
+130
+53
+242
+133
+67
+241
+145
+79
+245
+162
+103
+250
+176
+132
+203
+161
+131
+91
+92
+89
+43
+57
+62
+81
+73
+62
+135
+94
+64
+173
+106
+60
+188
+112
+56
+183
+110
+59
+155
+100
+63
+106
+82
+65
+51
+62
+63
+91
+92
+89
+133
+120
+107
+48
+58
+59
+95
+78
+64
+146
+97
+64
+118
+86
+65
+56
+64
+60
+101
+100
+92
+245
+212
+186
+253
+212
+188
+146
+135
+124
+48
+58
+59
+118
+86
+65
+183
+110
+59
+173
+106
+60
+95
+78
+64
+43
+57
+62
+186
+157
+134
+250
+197
+158
+251
+192
+154
+250
+197
+158
+250
+200
+166
+172
+150
+134
+70
+79
+77
+48
+58
+59
+89
+75
+66
+135
+94
+64
+163
+104
+61
+183
+110
+59
+183
+110
+59
+173
+106
+60
+146
+97
+64
+95
+78
+64
+56
+64
+60
+55
+66
+67
+150
+125
+114
+236
+186
+153
+251
+192
+154
+249
+189
+146
+249
+189
+146
+251
+192
+154
+195
+157
+134
+51
+62
+63
+76
+70
+64
+139
+96
+61
+125
+90
+64
+65
+67
+64
+76
+78
+76
+234
+168
+124
+249
+159
+103
+247
+150
+84
+243
+141
+78
+247
+143
+74
+247
+150
+84
+249
+159
+103
+250
+176
+132
+250
+197
+158
+255
+215
+190
+207
+178
+158
+84
+85
+82
+48
+58
+59
+89
+75
+66
+146
+97
+64
+173
+106
+60
+183
+110
+59
+183
+110
+59
+163
+104
+61
+118
+86
+65
+62
+63
+61
+58
+69
+70
+63
+74
+74
+81
+73
+62
+227
+126
+50
+227
+126
+50
+224
+123
+55
+234
+126
+45
+135
+94
+64
+58
+69
+70
+251
+192
+154
+245
+169
+119
+249
+146
+83
+247
+130
+53
+238
+116
+34
+235
+107
+16
+243
+101
+2
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+246
+97
+3
+246
+97
+3
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+243
+101
+2
+236
+102
+14
+236
+102
+14
+235
+107
+16
+246
+116
+28
+239
+117
+44
+241
+132
+59
+247
+143
+74
+249
+152
+92
+214
+151
+109
+118
+86
+65
+146
+111
+88
+192
+155
+91
+192
+155
+91
+195
+167
+113
+239
+227
+208
+255
+238
+227
+255
+238
+227
+255
+238
+227
+255
+238
+227
+255
+238
+227
+255
+238
+227
+255
+238
+227
+255
+238
+227
+255
+238
+227
+255
+238
+227
+255
+238
+227
+255
+238
+227
+255
+238
+227
+255
+238
+227
+216
+194
+154
+192
+155
+91
+192
+155
+91
+192
+155
+91
+146
+111
+88
+162
+125
+96
+250
+176
+132
+245
+169
+119
+247
+165
+111
+249
+159
+103
+246
+156
+93
+247
+150
+84
+243
+141
+78
+243
+141
+78
+243
+141
+78
+241
+145
+79
+247
+150
+84
+249
+159
+103
+245
+169
+119
+187
+140
+108
+89
+84
+82
+48
+58
+59
+48
+58
+59
+91
+92
+89
+194
+173
+157
+255
+215
+190
+207
+178
+158
+109
+106
+99
+51
+62
+63
+48
+58
+59
+51
+62
+63
+48
+58
+59
+48
+58
+59
+55
+66
+67
+124
+111
+99
+203
+161
+131
+248
+180
+134
+245
+169
+119
+249
+159
+103
+247
+150
+84
+243
+141
+78
+243
+141
+78
+243
+141
+78
+247
+150
+84
+249
+159
+103
+245
+169
+119
+248
+180
+134
+219
+170
+138
+154
+133
+118
+84
+85
+82
+51
+62
+63
+48
+58
+59
+51
+62
+63
+51
+62
+63
+48
+58
+59
+48
+58
+59
+55
+66
+67
+91
+92
+89
+154
+133
+118
+209
+171
+139
+245
+179
+138
+249
+174
+124
+247
+165
+111
+249
+159
+103
+246
+156
+93
+246
+156
+93
+249
+159
+103
+247
+165
+111
+249
+174
+124
+252
+185
+144
+195
+157
+134
+109
+106
+99
+55
+66
+67
+48
+58
+59
+51
+62
+63
+51
+62
+63
+48
+58
+59
+51
+62
+63
+109
+106
+99
+207
+178
+158
+255
+215
+190
+217
+187
+166
+91
+92
+89
+51
+62
+63
+48
+58
+59
+76
+78
+76
+172
+150
+134
+253
+212
+188
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+194
+173
+157
+101
+100
+92
+51
+62
+63
+48
+58
+59
+48
+58
+59
+51
+62
+63
+48
+58
+59
+48
+58
+59
+97
+98
+96
+194
+173
+157
+146
+135
+124
+56
+64
+60
+145
+114
+49
+168
+127
+42
+158
+125
+46
+168
+127
+42
+129
+106
+52
+48
+58
+59
+194
+173
+157
+255
+215
+190
+176
+156
+141
+76
+78
+76
+48
+58
+59
+55
+66
+67
+115
+102
+92
+234
+168
+124
+245
+169
+119
+247
+165
+111
+247
+165
+111
+247
+165
+111
+245
+169
+119
+249
+174
+124
+245
+179
+138
+209
+171
+139
+144
+125
+110
+76
+78
+76
+48
+58
+59
+48
+58
+59
+51
+62
+63
+51
+62
+63
+48
+58
+59
+48
+58
+59
+58
+69
+70
+101
+100
+92
+154
+133
+118
+219
+170
+138
+252
+185
+144
+248
+180
+134
+249
+174
+124
+245
+169
+119
+249
+174
+124
+250
+176
+132
+230
+173
+136
+124
+111
+99
+55
+66
+67
+43
+57
+62
+58
+69
+70
+137
+127
+115
+245
+212
+186
+245
+212
+186
+161
+144
+134
+70
+79
+77
+43
+57
+62
+51
+62
+63
+51
+62
+63
+48
+58
+59
+43
+57
+62
+84
+85
+82
+154
+133
+118
+240
+181
+138
+249
+174
+124
+247
+165
+111
+249
+152
+92
+243
+141
+78
+241
+138
+68
+242
+133
+67
+241
+138
+68
+241
+145
+79
+246
+156
+93
+247
+165
+111
+250
+176
+132
+219
+170
+138
+144
+125
+110
+77
+85
+81
+43
+57
+62
+48
+58
+59
+48
+58
+59
+51
+62
+63
+48
+58
+59
+43
+57
+62
+77
+85
+81
+150
+125
+114
+219
+170
+138
+250
+176
+132
+247
+165
+111
+246
+156
+93
+241
+145
+79
+241
+138
+68
+241
+138
+68
+241
+138
+68
+243
+141
+78
+249
+152
+92
+247
+165
+111
+250
+176
+132
+230
+173
+136
+154
+133
+118
+77
+85
+81
+43
+57
+62
+48
+58
+59
+51
+62
+63
+48
+58
+59
+43
+57
+62
+70
+79
+77
+161
+144
+134
+245
+212
+186
+255
+215
+190
+161
+144
+134
+63
+74
+74
+43
+57
+62
+51
+62
+63
+109
+106
+99
+217
+187
+166
+251
+209
+178
+238
+205
+179
+137
+127
+115
+58
+69
+70
+43
+57
+62
+58
+69
+70
+139
+115
+96
+238
+159
+107
+249
+152
+92
+241
+138
+68
+247
+130
+53
+238
+123
+45
+239
+117
+44
+247
+118
+39
+238
+123
+45
+241
+132
+59
+241
+145
+79
+249
+159
+103
+249
+174
+124
+240
+181
+138
+167
+142
+123
+91
+92
+89
+43
+57
+62
+48
+58
+59
+51
+62
+63
+48
+58
+59
+43
+57
+62
+63
+74
+74
+137
+127
+115
+234
+204
+183
+255
+215
+190
+146
+135
+124
+63
+74
+74
+43
+57
+62
+51
+62
+63
+115
+102
+92
+236
+186
+153
+251
+192
+154
+251
+192
+154
+236
+186
+153
+133
+120
+107
+43
+57
+62
+48
+58
+59
+48
+58
+59
+55
+66
+67
+158
+130
+108
+248
+180
+134
+250
+176
+132
+249
+174
+124
+249
+174
+124
+250
+176
+132
+252
+185
+144
+239
+182
+144
+154
+133
+118
+84
+85
+82
+43
+57
+62
+48
+58
+59
+48
+58
+59
+51
+62
+63
+48
+58
+59
+43
+57
+62
+70
+79
+77
+133
+120
+107
+219
+170
+138
+245
+179
+138
+250
+176
+132
+245
+169
+119
+247
+165
+111
+247
+165
+111
+245
+169
+119
+249
+174
+124
+187
+140
+108
+81
+77
+76
+43
+57
+62
+43
+57
+62
+99
+90
+79
+214
+151
+109
+249
+159
+103
+247
+150
+84
+247
+143
+74
+241
+138
+68
+241
+138
+68
+249
+146
+83
+249
+159
+103
+250
+176
+132
+250
+197
+158
+255
+215
+190
+255
+215
+190
+245
+212
+186
+161
+144
+134
+77
+85
+81
+43
+57
+62
+48
+58
+59
+51
+62
+63
+48
+58
+59
+41
+58
+57
+55
+66
+67
+120
+114
+108
+217
+187
+166
+97
+98
+96
+95
+78
+64
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+125
+52
+112
+85
+63
+70
+79
+77
+249
+189
+146
+247
+165
+111
+243
+141
+78
+247
+130
+53
+238
+116
+34
+236
+102
+14
+243
+101
+2
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+235
+94
+9
+235
+94
+9
+236
+102
+14
+235
+107
+16
+236
+108
+29
+239
+117
+44
+238
+123
+53
+242
+133
+67
+241
+145
+79
+241
+153
+96
+247
+165
+111
+249
+174
+124
+250
+176
+132
+245
+179
+138
+252
+185
+144
+249
+189
+146
+249
+189
+146
+249
+189
+146
+249
+189
+146
+249
+189
+146
+249
+189
+146
+249
+189
+146
+249
+189
+146
+249
+189
+146
+249
+189
+146
+249
+189
+146
+249
+189
+146
+249
+189
+146
+249
+189
+146
+252
+185
+144
+245
+179
+138
+250
+176
+132
+249
+174
+124
+245
+169
+119
+245
+162
+103
+241
+153
+96
+241
+145
+86
+243
+141
+78
+241
+138
+68
+242
+133
+67
+241
+132
+59
+238
+123
+53
+238
+123
+53
+238
+123
+53
+241
+132
+59
+242
+133
+67
+243
+141
+78
+241
+145
+86
+249
+159
+103
+238
+159
+107
+210
+156
+119
+210
+156
+119
+240
+181
+138
+249
+189
+146
+251
+192
+154
+251
+192
+154
+250
+197
+158
+212
+173
+150
+186
+157
+134
+167
+142
+123
+167
+142
+123
+195
+157
+134
+219
+170
+138
+248
+180
+134
+245
+169
+119
+245
+162
+103
+247
+150
+84
+243
+141
+78
+241
+132
+59
+238
+123
+53
+238
+123
+53
+238
+123
+53
+241
+132
+59
+241
+138
+68
+247
+150
+84
+245
+162
+103
+245
+169
+119
+250
+176
+132
+239
+182
+144
+219
+170
+138
+186
+157
+134
+167
+142
+123
+167
+142
+123
+172
+150
+134
+195
+157
+134
+219
+170
+138
+239
+182
+144
+248
+180
+134
+245
+169
+119
+245
+162
+103
+241
+153
+96
+241
+145
+79
+241
+138
+68
+241
+138
+68
+241
+138
+68
+241
+138
+68
+241
+145
+79
+241
+153
+96
+247
+165
+111
+249
+174
+124
+245
+179
+138
+219
+170
+138
+186
+157
+134
+167
+142
+123
+167
+142
+123
+186
+157
+134
+212
+173
+150
+250
+197
+158
+251
+192
+154
+251
+192
+154
+249
+189
+146
+239
+182
+144
+219
+170
+138
+219
+170
+138
+239
+182
+144
+250
+197
+158
+250
+200
+166
+251
+209
+178
+238
+205
+179
+172
+150
+134
+137
+127
+115
+161
+144
+134
+217
+187
+166
+253
+212
+188
+227
+196
+175
+194
+173
+157
+176
+156
+141
+172
+150
+134
+187
+166
+150
+217
+187
+166
+255
+215
+190
+245
+212
+186
+76
+78
+76
+75
+74
+61
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+105
+93
+60
+58
+69
+70
+217
+187
+166
+255
+215
+190
+253
+204
+176
+236
+186
+153
+210
+156
+119
+210
+156
+119
+247
+165
+111
+249
+159
+103
+249
+152
+92
+241
+145
+86
+243
+141
+78
+241
+145
+79
+247
+150
+84
+241
+153
+96
+245
+162
+103
+245
+169
+119
+248
+180
+134
+239
+182
+144
+209
+171
+139
+186
+157
+134
+167
+142
+123
+167
+142
+123
+178
+146
+122
+195
+157
+134
+230
+173
+136
+239
+182
+144
+250
+176
+132
+245
+169
+119
+247
+165
+111
+249
+159
+103
+241
+153
+96
+249
+152
+92
+249
+152
+92
+241
+153
+96
+245
+162
+103
+247
+165
+111
+210
+156
+119
+210
+156
+119
+230
+173
+136
+249
+189
+146
+249
+189
+146
+251
+192
+154
+250
+197
+158
+236
+186
+153
+203
+161
+131
+167
+142
+123
+167
+142
+123
+178
+146
+122
+203
+161
+131
+240
+181
+138
+249
+174
+124
+247
+165
+111
+241
+153
+96
+243
+141
+78
+242
+133
+67
+238
+123
+53
+238
+123
+45
+238
+123
+45
+238
+123
+45
+241
+132
+59
+241
+138
+68
+241
+145
+86
+249
+159
+103
+245
+169
+119
+250
+176
+132
+240
+181
+138
+209
+171
+139
+178
+146
+122
+167
+142
+123
+167
+142
+123
+186
+157
+134
+209
+171
+139
+240
+181
+138
+250
+176
+132
+245
+169
+119
+249
+159
+103
+241
+145
+86
+241
+138
+68
+241
+132
+59
+238
+123
+45
+238
+123
+45
+238
+123
+45
+247
+130
+53
+242
+133
+67
+241
+145
+79
+241
+153
+96
+247
+165
+111
+250
+176
+132
+240
+181
+138
+203
+161
+131
+178
+146
+122
+167
+142
+123
+167
+142
+123
+195
+157
+134
+236
+186
+153
+251
+192
+154
+251
+192
+154
+249
+189
+146
+249
+189
+146
+230
+173
+136
+203
+161
+131
+219
+170
+138
+245
+179
+138
+245
+179
+138
+245
+179
+138
+245
+179
+138
+248
+180
+134
+234
+168
+124
+214
+151
+109
+214
+151
+109
+245
+162
+103
+241
+145
+86
+241
+138
+68
+238
+123
+53
+239
+117
+44
+238
+116
+34
+236
+108
+29
+236
+108
+29
+238
+116
+34
+238
+123
+45
+241
+132
+59
+243
+141
+78
+241
+153
+96
+247
+165
+111
+249
+174
+124
+240
+181
+138
+209
+171
+139
+178
+146
+122
+167
+142
+123
+167
+142
+123
+195
+157
+134
+236
+186
+153
+250
+197
+158
+251
+192
+154
+249
+189
+146
+249
+189
+146
+230
+173
+136
+210
+156
+119
+210
+156
+119
+250
+176
+132
+249
+174
+124
+249
+174
+124
+249
+174
+124
+249
+174
+124
+250
+176
+132
+210
+156
+119
+162
+125
+96
+162
+125
+96
+214
+151
+109
+247
+165
+111
+245
+162
+103
+241
+153
+96
+241
+153
+96
+241
+153
+96
+249
+159
+103
+247
+165
+111
+245
+169
+119
+250
+176
+132
+240
+181
+138
+209
+171
+139
+186
+157
+134
+167
+142
+123
+167
+142
+123
+178
+146
+122
+203
+161
+131
+239
+182
+144
+248
+180
+134
+245
+169
+119
+245
+162
+103
+241
+153
+96
+241
+145
+86
+241
+145
+86
+241
+145
+86
+247
+150
+84
+241
+153
+96
+245
+162
+103
+238
+159
+107
+204
+141
+99
+214
+151
+109
+241
+153
+96
+249
+152
+92
+243
+141
+78
+242
+133
+67
+241
+132
+59
+241
+132
+59
+241
+138
+68
+241
+145
+79
+245
+162
+103
+248
+180
+134
+212
+173
+150
+146
+135
+124
+137
+127
+115
+176
+156
+141
+234
+204
+183
+253
+212
+188
+217
+187
+166
+187
+166
+150
+172
+150
+134
+176
+156
+141
+194
+173
+157
+234
+204
+183
+255
+215
+190
+194
+173
+157
+43
+57
+62
+139
+96
+61
+234
+126
+45
+224
+123
+55
+227
+126
+50
+227
+126
+50
+89
+75
+66
+101
+100
+92
+245
+179
+138
+245
+162
+103
+241
+138
+68
+238
+123
+45
+236
+108
+29
+236
+102
+14
+235
+94
+9
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+235
+94
+9
+235
+94
+9
+236
+102
+14
+235
+107
+16
+236
+108
+29
+238
+116
+34
+238
+123
+45
+241
+132
+59
+241
+138
+68
+241
+145
+79
+249
+152
+92
+241
+153
+96
+245
+162
+103
+245
+162
+103
+247
+165
+111
+247
+165
+111
+247
+165
+111
+247
+165
+111
+247
+165
+111
+247
+165
+111
+247
+165
+111
+247
+165
+111
+247
+165
+111
+247
+165
+111
+247
+165
+111
+247
+165
+111
+247
+165
+111
+247
+165
+111
+245
+162
+103
+245
+162
+103
+241
+153
+96
+241
+153
+96
+241
+145
+86
+243
+141
+78
+241
+138
+68
+241
+132
+59
+238
+123
+53
+238
+123
+45
+239
+117
+44
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+239
+117
+44
+238
+123
+45
+238
+123
+53
+241
+132
+59
+243
+141
+78
+241
+145
+86
+241
+153
+96
+245
+162
+103
+245
+162
+103
+247
+165
+111
+247
+165
+111
+245
+169
+119
+245
+169
+119
+245
+169
+119
+249
+174
+124
+245
+169
+119
+245
+169
+119
+245
+169
+119
+247
+165
+111
+241
+153
+96
+241
+145
+86
+243
+141
+78
+241
+132
+59
+238
+123
+53
+239
+117
+44
+238
+116
+34
+238
+116
+34
+238
+116
+34
+239
+117
+44
+238
+123
+45
+241
+132
+59
+241
+138
+68
+241
+145
+86
+241
+153
+96
+245
+162
+103
+245
+169
+119
+249
+174
+124
+250
+176
+132
+250
+176
+132
+250
+176
+132
+249
+174
+124
+245
+169
+119
+247
+165
+111
+241
+153
+96
+241
+145
+86
+243
+141
+78
+242
+133
+67
+241
+132
+59
+238
+123
+45
+238
+123
+45
+238
+123
+45
+238
+123
+45
+241
+132
+59
+242
+133
+67
+243
+141
+78
+249
+152
+92
+245
+162
+103
+247
+165
+111
+245
+169
+119
+245
+169
+119
+245
+169
+119
+245
+169
+119
+245
+169
+119
+245
+169
+119
+245
+169
+119
+247
+165
+111
+247
+165
+111
+247
+165
+111
+247
+165
+111
+245
+169
+119
+249
+174
+124
+245
+179
+138
+251
+192
+154
+232
+190
+161
+101
+100
+92
+51
+62
+63
+63
+69
+60
+51
+62
+63
+55
+66
+67
+109
+106
+99
+176
+156
+141
+234
+204
+183
+255
+215
+190
+255
+215
+190
+255
+215
+190
+245
+212
+186
+207
+178
+158
+91
+92
+89
+51
+62
+63
+129
+106
+52
+168
+127
+42
+158
+125
+46
+158
+125
+46
+168
+127
+42
+75
+74
+61
+91
+92
+89
+245
+212
+186
+250
+200
+166
+252
+185
+144
+249
+174
+124
+247
+165
+111
+241
+153
+96
+241
+145
+79
+241
+138
+68
+242
+133
+67
+241
+132
+59
+238
+123
+53
+241
+132
+59
+241
+132
+59
+241
+138
+68
+243
+141
+78
+241
+145
+86
+241
+153
+96
+247
+165
+111
+245
+169
+119
+249
+174
+124
+250
+176
+132
+250
+176
+132
+249
+174
+124
+249
+174
+124
+245
+169
+119
+245
+162
+103
+241
+153
+96
+241
+145
+86
+241
+145
+79
+241
+138
+68
+242
+133
+67
+242
+133
+67
+242
+133
+67
+241
+138
+68
+243
+141
+78
+241
+145
+86
+241
+153
+96
+241
+153
+96
+245
+162
+103
+245
+162
+103
+247
+165
+111
+245
+169
+119
+245
+169
+119
+245
+169
+119
+245
+169
+119
+245
+169
+119
+245
+169
+119
+245
+169
+119
+247
+165
+111
+245
+162
+103
+241
+153
+96
+241
+145
+79
+241
+138
+68
+238
+123
+53
+238
+123
+45
+238
+116
+34
+235
+113
+30
+235
+113
+30
+238
+116
+34
+239
+117
+44
+238
+123
+45
+241
+132
+59
+241
+138
+68
+241
+145
+86
+241
+153
+96
+245
+162
+103
+245
+169
+119
+245
+169
+119
+249
+174
+124
+249
+174
+124
+245
+169
+119
+245
+169
+119
+245
+162
+103
+241
+153
+96
+241
+145
+86
+241
+138
+68
+241
+132
+59
+238
+123
+45
+239
+117
+44
+238
+116
+34
+235
+113
+30
+235
+113
+30
+238
+116
+34
+238
+123
+45
+241
+132
+59
+241
+138
+68
+241
+145
+86
+241
+153
+96
+245
+162
+103
+247
+165
+111
+245
+169
+119
+245
+169
+119
+245
+169
+119
+245
+169
+119
+245
+169
+119
+245
+169
+119
+247
+165
+111
+247
+165
+111
+247
+165
+111
+245
+162
+103
+245
+162
+103
+245
+162
+103
+245
+162
+103
+245
+162
+103
+245
+162
+103
+245
+162
+103
+245
+162
+103
+241
+153
+96
+241
+153
+96
+241
+145
+86
+243
+141
+78
+241
+132
+59
+238
+123
+53
+239
+117
+44
+235
+113
+30
+236
+108
+29
+235
+107
+16
+235
+107
+16
+236
+108
+29
+235
+113
+30
+239
+117
+44
+238
+123
+53
+242
+133
+67
+241
+145
+79
+241
+153
+96
+245
+162
+103
+247
+165
+111
+245
+169
+119
+245
+169
+119
+249
+174
+124
+245
+169
+119
+245
+169
+119
+245
+169
+119
+245
+169
+119
+247
+165
+111
+247
+165
+111
+245
+162
+103
+245
+162
+103
+241
+153
+96
+241
+153
+96
+241
+153
+96
+241
+153
+96
+241
+153
+96
+241
+153
+96
+241
+153
+96
+241
+153
+96
+241
+153
+96
+241
+153
+96
+249
+152
+92
+241
+145
+86
+243
+141
+78
+241
+138
+68
+241
+138
+68
+241
+138
+68
+241
+138
+68
+243
+141
+78
+241
+145
+86
+241
+153
+96
+245
+162
+103
+245
+169
+119
+245
+169
+119
+249
+174
+124
+249
+174
+124
+249
+174
+124
+245
+169
+119
+247
+165
+111
+241
+153
+96
+241
+145
+86
+243
+141
+78
+241
+138
+68
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+138
+68
+243
+141
+78
+241
+145
+79
+241
+145
+79
+241
+145
+79
+243
+141
+78
+241
+138
+68
+241
+132
+59
+238
+123
+53
+238
+123
+53
+238
+123
+53
+242
+133
+67
+241
+145
+86
+247
+165
+111
+210
+156
+119
+63
+74
+74
+62
+63
+61
+69
+69
+61
+48
+58
+59
+63
+74
+74
+133
+120
+107
+194
+173
+157
+245
+212
+186
+255
+215
+190
+255
+215
+190
+255
+215
+190
+245
+212
+186
+176
+156
+141
+55
+66
+67
+76
+70
+64
+212
+120
+56
+227
+126
+50
+224
+123
+55
+234
+125
+52
+194
+112
+58
+56
+64
+60
+154
+133
+118
+250
+176
+132
+241
+153
+96
+242
+133
+67
+239
+117
+44
+236
+108
+29
+236
+102
+14
+235
+94
+9
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+235
+94
+9
+235
+94
+9
+236
+102
+14
+236
+102
+14
+236
+108
+29
+235
+113
+30
+239
+117
+44
+238
+123
+45
+238
+123
+53
+241
+132
+59
+241
+138
+68
+241
+138
+68
+243
+141
+78
+243
+141
+78
+241
+145
+79
+241
+145
+79
+241
+145
+79
+241
+145
+79
+241
+145
+79
+241
+145
+79
+241
+145
+79
+241
+145
+79
+241
+145
+79
+241
+145
+79
+241
+145
+79
+243
+141
+78
+243
+141
+78
+243
+141
+78
+241
+138
+68
+241
+138
+68
+241
+132
+59
+241
+132
+59
+238
+123
+53
+238
+123
+45
+238
+116
+34
+238
+116
+34
+236
+108
+29
+236
+108
+29
+235
+107
+16
+235
+107
+16
+235
+107
+16
+236
+108
+29
+236
+108
+29
+235
+113
+30
+238
+116
+34
+238
+123
+45
+238
+123
+53
+241
+132
+59
+242
+133
+67
+241
+138
+68
+243
+141
+78
+243
+141
+78
+241
+145
+79
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+86
+243
+141
+78
+241
+138
+68
+241
+132
+59
+238
+123
+53
+239
+117
+44
+238
+116
+34
+236
+108
+29
+236
+108
+29
+235
+107
+16
+235
+107
+16
+236
+108
+29
+238
+116
+34
+239
+117
+44
+238
+123
+45
+241
+132
+59
+241
+138
+68
+243
+141
+78
+241
+145
+86
+249
+152
+92
+241
+153
+96
+241
+153
+96
+241
+153
+96
+249
+152
+92
+241
+145
+86
+243
+141
+78
+241
+138
+68
+241
+132
+59
+238
+123
+53
+238
+123
+45
+238
+116
+34
+235
+113
+30
+236
+108
+29
+236
+108
+29
+235
+113
+30
+238
+116
+34
+238
+123
+45
+238
+123
+53
+241
+132
+59
+241
+138
+68
+241
+145
+79
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+79
+241
+145
+79
+241
+145
+79
+241
+145
+86
+241
+153
+96
+245
+162
+103
+245
+169
+119
+245
+179
+138
+144
+125
+110
+51
+62
+63
+117
+98
+55
+158
+125
+46
+145
+114
+49
+105
+93
+60
+69
+69
+61
+48
+58
+59
+58
+69
+70
+91
+92
+89
+120
+114
+108
+120
+114
+108
+91
+92
+89
+48
+58
+59
+56
+64
+60
+123
+102
+54
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+137
+110
+49
+48
+58
+59
+161
+144
+134
+250
+197
+158
+248
+180
+134
+247
+165
+111
+241
+153
+96
+241
+145
+79
+241
+138
+68
+241
+132
+59
+238
+123
+53
+238
+123
+45
+239
+117
+44
+238
+116
+34
+238
+116
+34
+239
+117
+44
+238
+123
+45
+238
+123
+53
+241
+132
+59
+241
+138
+68
+243
+141
+78
+241
+145
+86
+249
+152
+92
+241
+153
+96
+241
+153
+96
+241
+153
+96
+241
+145
+86
+241
+145
+86
+243
+141
+78
+241
+138
+68
+241
+132
+59
+238
+123
+53
+238
+123
+45
+238
+123
+45
+239
+117
+44
+238
+123
+45
+238
+123
+45
+238
+123
+53
+241
+132
+59
+241
+132
+59
+241
+138
+68
+241
+138
+68
+243
+141
+78
+241
+145
+79
+241
+145
+79
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+79
+243
+141
+78
+242
+133
+67
+241
+132
+59
+238
+123
+45
+238
+116
+34
+235
+113
+30
+236
+108
+29
+235
+107
+16
+235
+107
+16
+235
+107
+16
+236
+108
+29
+235
+113
+30
+239
+117
+44
+238
+123
+45
+241
+132
+59
+241
+138
+68
+243
+141
+78
+241
+145
+86
+241
+145
+86
+241
+153
+96
+241
+153
+96
+241
+145
+86
+241
+145
+86
+243
+141
+78
+241
+138
+68
+241
+132
+59
+238
+123
+45
+239
+117
+44
+235
+113
+30
+236
+108
+29
+235
+107
+16
+235
+107
+16
+235
+107
+16
+236
+108
+29
+235
+113
+30
+239
+117
+44
+238
+123
+45
+241
+132
+59
+242
+133
+67
+243
+141
+78
+241
+145
+79
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+79
+241
+145
+79
+243
+141
+78
+243
+141
+78
+243
+141
+78
+243
+141
+78
+241
+138
+68
+241
+138
+68
+241
+138
+68
+241
+138
+68
+241
+138
+68
+241
+138
+68
+242
+133
+67
+241
+132
+59
+238
+123
+53
+238
+123
+45
+238
+116
+34
+236
+108
+29
+235
+107
+16
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+235
+107
+16
+236
+108
+29
+238
+116
+34
+238
+123
+45
+238
+123
+53
+242
+133
+67
+241
+138
+68
+241
+145
+79
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+79
+243
+141
+78
+243
+141
+78
+241
+138
+68
+241
+138
+68
+241
+138
+68
+242
+133
+67
+242
+133
+67
+242
+133
+67
+241
+138
+68
+241
+138
+68
+241
+138
+68
+241
+138
+68
+242
+133
+67
+241
+132
+59
+241
+132
+59
+238
+123
+53
+238
+123
+45
+238
+123
+45
+238
+123
+45
+238
+123
+45
+238
+123
+53
+241
+132
+59
+241
+138
+68
+243
+141
+78
+241
+145
+86
+241
+145
+86
+241
+153
+96
+241
+153
+96
+241
+145
+86
+241
+145
+86
+243
+141
+78
+241
+138
+68
+241
+132
+59
+238
+123
+53
+238
+123
+45
+239
+117
+44
+239
+117
+44
+239
+117
+44
+239
+117
+44
+238
+123
+45
+238
+123
+53
+238
+123
+53
+241
+132
+59
+241
+132
+59
+238
+123
+53
+238
+123
+45
+239
+117
+44
+239
+117
+44
+239
+117
+44
+238
+123
+53
+242
+133
+67
+241
+145
+86
+238
+159
+107
+84
+85
+82
+69
+69
+61
+188
+112
+56
+214
+121
+50
+173
+106
+60
+112
+85
+63
+62
+63
+61
+41
+58
+57
+63
+74
+74
+97
+98
+96
+120
+114
+108
+109
+106
+99
+77
+85
+81
+41
+58
+57
+81
+73
+62
+194
+112
+58
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+126
+45
+125
+90
+64
+51
+62
+63
+209
+171
+139
+245
+169
+119
+241
+145
+86
+241
+132
+59
+238
+116
+34
+235
+107
+16
+236
+102
+14
+235
+94
+9
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+230
+97
+5
+235
+94
+9
+235
+94
+9
+236
+102
+14
+235
+107
+16
+236
+108
+29
+235
+113
+30
+238
+116
+34
+239
+117
+44
+238
+123
+45
+238
+123
+45
+238
+123
+45
+238
+123
+53
+238
+123
+53
+238
+123
+53
+238
+123
+53
+238
+123
+53
+238
+123
+53
+238
+123
+53
+238
+123
+53
+238
+123
+53
+238
+123
+53
+238
+123
+53
+238
+123
+53
+238
+123
+53
+238
+123
+53
+238
+123
+45
+238
+123
+45
+239
+117
+44
+239
+117
+44
+238
+116
+34
+235
+113
+30
+236
+108
+29
+235
+107
+16
+235
+107
+16
+236
+102
+14
+236
+102
+14
+235
+94
+9
+235
+94
+9
+235
+94
+9
+236
+102
+14
+236
+102
+14
+235
+107
+16
+236
+108
+29
+236
+108
+29
+238
+116
+34
+239
+117
+44
+239
+117
+44
+238
+123
+45
+238
+123
+45
+238
+123
+53
+238
+123
+53
+238
+123
+53
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+238
+123
+53
+238
+123
+53
+238
+123
+45
+239
+117
+44
+238
+116
+34
+236
+108
+29
+235
+107
+16
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+235
+107
+16
+236
+108
+29
+235
+113
+30
+238
+116
+34
+238
+123
+45
+238
+123
+53
+238
+123
+53
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+238
+123
+53
+238
+123
+45
+239
+117
+44
+238
+116
+34
+236
+108
+29
+235
+107
+16
+235
+107
+16
+236
+102
+14
+236
+102
+14
+235
+107
+16
+236
+108
+29
+236
+108
+29
+238
+116
+34
+239
+117
+44
+238
+123
+45
+238
+123
+53
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+238
+123
+53
+238
+123
+53
+238
+123
+53
+238
+123
+53
+241
+132
+59
+241
+138
+68
+241
+145
+86
+238
+159
+107
+234
+168
+124
+84
+85
+82
+83
+78
+61
+171
+129
+45
+158
+125
+46
+168
+127
+42
+168
+127
+42
+158
+125
+46
+129
+106
+52
+100
+89
+56
+83
+78
+61
+75
+74
+61
+69
+69
+61
+83
+78
+61
+105
+93
+60
+152
+119
+47
+168
+127
+42
+158
+125
+46
+158
+125
+46
+161
+127
+40
+168
+127
+42
+75
+74
+61
+63
+74
+74
+236
+186
+153
+245
+179
+138
+238
+159
+107
+241
+145
+86
+241
+138
+68
+241
+132
+59
+238
+123
+45
+238
+116
+34
+235
+113
+30
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+238
+116
+34
+239
+117
+44
+238
+123
+45
+238
+123
+53
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+238
+123
+53
+238
+123
+53
+238
+123
+45
+239
+117
+44
+238
+116
+34
+235
+113
+30
+236
+108
+29
+236
+108
+29
+236
+108
+29
+235
+113
+30
+238
+116
+34
+238
+116
+34
+239
+117
+44
+238
+123
+45
+238
+123
+45
+238
+123
+53
+238
+123
+53
+238
+123
+53
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+238
+123
+53
+238
+123
+45
+239
+117
+44
+238
+116
+34
+235
+113
+30
+236
+108
+29
+236
+102
+14
+236
+102
+14
+236
+102
+14
+235
+94
+9
+236
+102
+14
+236
+102
+14
+235
+107
+16
+236
+108
+29
+235
+113
+30
+238
+116
+34
+238
+123
+45
+238
+123
+53
+238
+123
+53
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+238
+123
+53
+238
+123
+53
+238
+123
+45
+238
+116
+34
+235
+113
+30
+236
+108
+29
+235
+107
+16
+236
+102
+14
+236
+102
+14
+235
+94
+9
+236
+102
+14
+236
+102
+14
+235
+107
+16
+236
+108
+29
+235
+113
+30
+238
+116
+34
+238
+123
+45
+238
+123
+53
+238
+123
+53
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+238
+123
+53
+238
+123
+53
+238
+123
+53
+238
+123
+53
+238
+123
+53
+238
+123
+45
+238
+123
+45
+238
+123
+45
+238
+123
+45
+238
+123
+45
+238
+123
+45
+238
+123
+45
+238
+123
+45
+239
+117
+44
+239
+117
+44
+238
+116
+34
+236
+108
+29
+236
+108
+29
+235
+107
+16
+236
+102
+14
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+236
+102
+14
+236
+102
+14
+235
+107
+16
+236
+108
+29
+238
+116
+34
+239
+117
+44
+238
+123
+45
+238
+123
+53
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+238
+123
+53
+238
+123
+53
+238
+123
+53
+238
+123
+45
+238
+123
+45
+238
+123
+45
+238
+123
+45
+239
+117
+44
+239
+117
+44
+239
+117
+44
+238
+123
+45
+238
+123
+45
+238
+123
+45
+238
+123
+45
+238
+123
+45
+239
+117
+44
+239
+117
+44
+238
+116
+34
+235
+113
+30
+236
+108
+29
+236
+108
+29
+235
+113
+30
+238
+116
+34
+239
+117
+44
+238
+123
+45
+238
+123
+53
+238
+123
+53
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+238
+123
+53
+238
+123
+45
+239
+117
+44
+238
+116
+34
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+235
+113
+30
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+235
+113
+30
+236
+108
+29
+235
+113
+30
+238
+116
+34
+238
+123
+45
+241
+132
+59
+241
+145
+86
+204
+141
+99
+41
+58
+57
+155
+100
+63
+234
+126
+45
+227
+126
+50
+227
+126
+50
+234
+125
+52
+209
+117
+53
+155
+100
+63
+118
+86
+65
+89
+75
+66
+81
+73
+62
+81
+73
+62
+106
+82
+65
+155
+100
+63
+214
+121
+50
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+194
+112
+58
+56
+64
+60
+109
+106
+99
+245
+179
+138
+245
+162
+103
+241
+138
+68
+238
+123
+45
+235
+113
+30
+236
+102
+14
+235
+94
+9
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+235
+94
+9
+235
+94
+9
+235
+94
+9
+236
+102
+14
+236
+102
+14
+235
+107
+16
+235
+107
+16
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+235
+113
+30
+235
+113
+30
+235
+113
+30
+235
+113
+30
+235
+113
+30
+235
+113
+30
+235
+113
+30
+235
+113
+30
+235
+113
+30
+235
+113
+30
+235
+113
+30
+235
+113
+30
+235
+113
+30
+235
+113
+30
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+235
+107
+16
+236
+102
+14
+236
+102
+14
+236
+102
+14
+235
+94
+9
+235
+94
+9
+235
+94
+9
+230
+97
+5
+230
+97
+5
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+236
+102
+14
+236
+102
+14
+235
+107
+16
+236
+108
+29
+236
+108
+29
+236
+108
+29
+235
+113
+30
+235
+113
+30
+235
+113
+30
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+235
+113
+30
+236
+108
+29
+236
+108
+29
+235
+107
+16
+236
+102
+14
+236
+102
+14
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+236
+102
+14
+235
+107
+16
+236
+108
+29
+236
+108
+29
+235
+113
+30
+238
+116
+34
+238
+116
+34
+239
+117
+44
+239
+117
+44
+239
+117
+44
+238
+116
+34
+238
+116
+34
+235
+113
+30
+236
+108
+29
+236
+108
+29
+235
+107
+16
+236
+102
+14
+236
+102
+14
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+236
+102
+14
+236
+102
+14
+235
+107
+16
+236
+108
+29
+236
+108
+29
+235
+113
+30
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+235
+113
+30
+235
+113
+30
+238
+116
+34
+238
+123
+45
+238
+123
+53
+241
+138
+68
+241
+145
+86
+238
+159
+107
+89
+84
+82
+75
+74
+61
+168
+127
+42
+168
+127
+42
+158
+125
+46
+158
+125
+46
+161
+127
+40
+168
+127
+42
+171
+129
+45
+168
+127
+42
+158
+125
+46
+158
+125
+46
+168
+127
+42
+171
+129
+45
+168
+127
+42
+158
+125
+46
+158
+125
+46
+168
+127
+42
+171
+129
+45
+95
+87
+59
+48
+58
+59
+167
+142
+123
+245
+179
+138
+238
+159
+107
+241
+145
+86
+242
+133
+67
+238
+123
+45
+238
+116
+34
+236
+108
+29
+236
+108
+29
+235
+107
+16
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+235
+107
+16
+236
+108
+29
+236
+108
+29
+235
+113
+30
+238
+116
+34
+238
+116
+34
+239
+117
+44
+239
+117
+44
+239
+117
+44
+238
+116
+34
+238
+116
+34
+235
+113
+30
+236
+108
+29
+236
+108
+29
+235
+107
+16
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+235
+107
+16
+235
+107
+16
+236
+108
+29
+236
+108
+29
+236
+108
+29
+235
+113
+30
+235
+113
+30
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+235
+113
+30
+236
+108
+29
+235
+107
+16
+236
+102
+14
+236
+102
+14
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+236
+102
+14
+235
+107
+16
+236
+108
+29
+236
+108
+29
+235
+113
+30
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+235
+113
+30
+236
+108
+29
+236
+108
+29
+235
+107
+16
+236
+102
+14
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+236
+102
+14
+236
+102
+14
+235
+107
+16
+236
+108
+29
+235
+113
+30
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+235
+113
+30
+235
+113
+30
+235
+113
+30
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+235
+107
+16
+235
+107
+16
+236
+102
+14
+236
+102
+14
+235
+94
+9
+235
+94
+9
+235
+94
+9
+230
+97
+5
+235
+94
+9
+235
+94
+9
+235
+94
+9
+236
+102
+14
+236
+102
+14
+235
+107
+16
+236
+108
+29
+235
+113
+30
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+235
+113
+30
+235
+113
+30
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+235
+107
+16
+235
+107
+16
+236
+102
+14
+236
+102
+14
+236
+102
+14
+235
+107
+16
+236
+108
+29
+236
+108
+29
+235
+113
+30
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+235
+113
+30
+236
+108
+29
+236
+108
+29
+235
+107
+16
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+235
+107
+16
+235
+107
+16
+236
+108
+29
+236
+108
+29
+235
+107
+16
+235
+107
+16
+235
+107
+16
+236
+108
+29
+235
+113
+30
+239
+117
+44
+241
+132
+59
+241
+145
+79
+204
+141
+99
+48
+58
+59
+139
+96
+61
+234
+126
+45
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+126
+45
+234
+126
+45
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+126
+45
+234
+126
+45
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+125
+52
+214
+121
+50
+81
+73
+62
+58
+69
+70
+219
+170
+138
+245
+169
+119
+241
+145
+86
+241
+132
+59
+239
+117
+44
+236
+108
+29
+236
+102
+14
+235
+94
+9
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+230
+97
+5
+230
+97
+5
+235
+94
+9
+230
+97
+5
+229
+102
+7
+229
+102
+7
+236
+102
+14
+236
+102
+14
+224
+98
+18
+224
+98
+18
+224
+98
+18
+236
+102
+14
+224
+98
+18
+236
+102
+14
+236
+102
+14
+224
+98
+18
+224
+98
+18
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+224
+98
+18
+236
+102
+14
+236
+102
+14
+229
+102
+7
+229
+102
+7
+230
+97
+5
+235
+94
+9
+235
+94
+9
+230
+97
+5
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+230
+97
+5
+235
+94
+9
+230
+97
+5
+235
+94
+9
+235
+94
+9
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+236
+102
+14
+224
+98
+18
+236
+102
+14
+235
+94
+9
+235
+94
+9
+235
+94
+9
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+230
+97
+5
+235
+94
+9
+230
+97
+5
+229
+102
+7
+236
+102
+14
+236
+102
+14
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+236
+102
+14
+224
+98
+18
+236
+102
+14
+229
+102
+7
+230
+97
+5
+235
+94
+9
+235
+94
+9
+230
+97
+5
+231
+91
+2
+230
+97
+5
+235
+94
+9
+235
+94
+9
+235
+94
+9
+230
+97
+5
+229
+102
+7
+236
+102
+14
+236
+102
+14
+236
+102
+14
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+236
+102
+14
+224
+98
+18
+236
+102
+14
+235
+107
+16
+236
+108
+29
+239
+117
+44
+234
+125
+52
+231
+136
+72
+241
+153
+96
+162
+125
+96
+48
+58
+59
+95
+87
+59
+158
+125
+46
+171
+129
+45
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+171
+129
+45
+158
+125
+46
+95
+87
+59
+48
+58
+59
+124
+111
+99
+245
+179
+138
+247
+165
+111
+241
+145
+86
+241
+132
+59
+238
+123
+45
+238
+116
+34
+236
+108
+29
+224
+98
+18
+229
+102
+7
+230
+97
+5
+235
+94
+9
+235
+94
+9
+230
+97
+5
+230
+97
+5
+230
+97
+5
+235
+94
+9
+230
+97
+5
+229
+102
+7
+236
+102
+14
+236
+102
+14
+236
+102
+14
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+236
+102
+14
+236
+102
+14
+236
+102
+14
+235
+94
+9
+230
+97
+5
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+236
+102
+14
+236
+102
+14
+236
+102
+14
+224
+98
+18
+224
+98
+18
+236
+102
+14
+236
+102
+14
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+224
+98
+18
+236
+102
+14
+229
+102
+7
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+231
+91
+2
+231
+91
+2
+231
+91
+2
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+229
+102
+7
+236
+102
+14
+224
+98
+18
+236
+102
+14
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+236
+102
+14
+224
+98
+18
+236
+102
+14
+229
+102
+7
+230
+97
+5
+235
+94
+9
+230
+97
+5
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+230
+97
+5
+230
+97
+5
+235
+94
+9
+235
+94
+9
+229
+102
+7
+236
+102
+14
+236
+102
+14
+236
+102
+14
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+236
+102
+14
+235
+107
+16
+236
+102
+14
+224
+98
+18
+224
+98
+18
+236
+102
+14
+224
+98
+18
+224
+98
+18
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+229
+102
+7
+236
+102
+14
+235
+94
+9
+230
+97
+5
+235
+94
+9
+235
+94
+9
+230
+97
+5
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+235
+94
+9
+230
+97
+5
+230
+97
+5
+229
+102
+7
+236
+102
+14
+224
+98
+18
+236
+102
+14
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+236
+102
+14
+236
+102
+14
+236
+102
+14
+224
+98
+18
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+224
+98
+18
+236
+102
+14
+236
+102
+14
+236
+102
+14
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+236
+102
+14
+236
+102
+14
+224
+98
+18
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+236
+102
+14
+236
+102
+14
+236
+102
+14
+229
+102
+7
+230
+97
+5
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+230
+97
+5
+235
+94
+9
+236
+102
+14
+236
+102
+14
+236
+102
+14
+229
+102
+7
+230
+97
+5
+229
+102
+7
+224
+98
+18
+236
+108
+29
+238
+116
+34
+238
+123
+53
+243
+141
+78
+241
+153
+96
+99
+90
+79
+56
+64
+60
+155
+100
+63
+234
+126
+45
+234
+126
+45
+227
+126
+50
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+227
+126
+50
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+227
+126
+50
+234
+126
+45
+194
+112
+58
+81
+73
+62
+48
+58
+59
+178
+146
+122
+249
+174
+124
+241
+153
+96
+231
+136
+72
+234
+125
+52
+238
+116
+34
+235
+107
+16
+229
+102
+7
+235
+94
+9
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+229
+102
+7
+236
+102
+14
+235
+113
+30
+239
+117
+44
+230
+128
+60
+236
+147
+85
+238
+159
+107
+139
+115
+96
+48
+58
+59
+69
+69
+61
+111
+94
+57
+145
+114
+49
+158
+125
+46
+168
+127
+42
+171
+129
+45
+168
+127
+42
+168
+127
+42
+168
+127
+42
+168
+127
+42
+171
+129
+45
+168
+127
+42
+152
+119
+47
+117
+98
+55
+69
+69
+61
+48
+58
+59
+144
+125
+110
+240
+181
+138
+247
+165
+111
+236
+147
+85
+242
+133
+67
+238
+123
+45
+235
+113
+30
+235
+107
+16
+236
+102
+14
+230
+97
+5
+230
+97
+5
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+229
+102
+7
+235
+107
+16
+235
+113
+30
+238
+123
+45
+242
+133
+67
+241
+153
+96
+214
+151
+109
+99
+90
+79
+48
+58
+59
+95
+78
+64
+155
+100
+63
+209
+117
+53
+227
+126
+50
+234
+125
+52
+234
+125
+52
+234
+125
+52
+234
+125
+52
+234
+125
+52
+234
+126
+45
+234
+126
+45
+227
+126
+50
+194
+112
+58
+125
+90
+64
+56
+64
+60
+58
+69
+70
+178
+146
+122
+250
+176
+132
+238
+159
+107
+241
+145
+79
+234
+125
+52
+239
+117
+44
+236
+108
+29
+224
+98
+18
+230
+97
+5
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+226
+93
+0
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+226
+93
+0
+226
+93
+0
+226
+93
+0
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+231
+91
+2
+226
+93
+0
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+231
+91
+2
+230
+97
+5
+229
+102
+7
+223
+103
+18
+226
+110
+35
+234
+125
+52
+231
+136
+72
+241
+153
+96
+245
+169
+119
+178
+146
+122
+101
+100
+92
+48
+58
+59
+56
+64
+60
+69
+69
+61
+95
+87
+59
+111
+94
+57
+123
+102
+54
+129
+106
+52
+129
+106
+52
+123
+102
+54
+105
+93
+60
+88
+82
+59
+62
+63
+61
+48
+58
+59
+91
+92
+89
+186
+157
+134
+245
+179
+138
+238
+159
+107
+236
+147
+85
+230
+128
+60
+234
+125
+52
+226
+110
+35
+223
+103
+18
+224
+98
+18
+230
+97
+5
+226
+93
+0
+226
+93
+0
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+226
+93
+0
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+230
+97
+5
+224
+98
+18
+236
+108
+29
+239
+117
+44
+230
+123
+57
+243
+141
+78
+238
+159
+107
+234
+168
+124
+158
+130
+108
+76
+78
+76
+41
+58
+57
+62
+63
+61
+95
+78
+64
+125
+90
+64
+146
+97
+64
+163
+104
+61
+173
+106
+60
+163
+104
+61
+155
+100
+63
+125
+90
+64
+95
+78
+64
+56
+64
+60
+43
+57
+62
+124
+111
+99
+209
+171
+139
+234
+168
+124
+238
+159
+107
+241
+145
+79
+230
+128
+60
+239
+117
+44
+236
+108
+29
+236
+102
+14
+229
+102
+7
+230
+97
+5
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+230
+97
+5
+230
+97
+5
+224
+98
+18
+236
+108
+29
+226
+110
+35
+230
+123
+57
+231
+136
+72
+241
+153
+96
+238
+159
+107
+240
+181
+138
+203
+161
+131
+150
+125
+114
+101
+100
+92
+76
+78
+76
+55
+66
+67
+48
+58
+59
+48
+58
+59
+48
+58
+59
+48
+58
+59
+58
+69
+70
+84
+85
+82
+124
+111
+99
+178
+146
+122
+240
+181
+138
+234
+168
+124
+238
+159
+107
+236
+147
+85
+230
+128
+60
+234
+125
+52
+226
+110
+35
+223
+103
+18
+224
+98
+18
+230
+97
+5
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+230
+97
+5
+224
+98
+18
+223
+103
+18
+226
+110
+35
+225
+124
+48
+230
+128
+60
+236
+147
+85
+241
+153
+96
+234
+168
+124
+230
+173
+136
+186
+157
+134
+133
+120
+107
+91
+92
+89
+63
+74
+74
+51
+62
+63
+48
+58
+59
+48
+58
+59
+48
+58
+59
+51
+62
+63
+63
+74
+74
+91
+92
+89
+144
+125
+110
+203
+161
+131
+240
+181
+138
+245
+169
+119
+241
+153
+96
+241
+145
+79
+230
+128
+60
+225
+124
+48
+226
+110
+35
+223
+103
+18
+224
+98
+18
+230
+97
+5
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+230
+97
+5
+224
+98
+18
+223
+103
+18
+226
+110
+35
+239
+117
+44
+230
+123
+57
+231
+136
+72
+236
+147
+85
+238
+159
+107
+245
+169
+119
+234
+168
+124
+240
+181
+138
+239
+182
+144
+236
+186
+153
+250
+197
+158
+250
+197
+158
+250
+197
+158
+251
+192
+154
+236
+186
+153
+239
+182
+144
+245
+179
+138
+234
+168
+124
+238
+159
+107
+241
+153
+96
+231
+136
+72
+230
+128
+60
+225
+124
+48
+226
+110
+35
+223
+103
+18
+224
+98
+18
+230
+97
+5
+230
+97
+5
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+230
+97
+5
+224
+98
+18
+223
+103
+18
+226
+110
+35
+225
+124
+48
+230
+128
+60
+231
+136
+72
+241
+153
+96
+238
+159
+107
+234
+168
+124
+240
+181
+138
+239
+182
+144
+236
+186
+153
+251
+192
+154
+250
+197
+158
+250
+197
+158
+250
+197
+158
+236
+186
+153
+239
+182
+144
+240
+181
+138
+234
+168
+124
+245
+169
+119
+238
+159
+107
+236
+147
+85
+231
+136
+72
+230
+123
+57
+239
+117
+44
+226
+110
+35
+223
+103
+18
+224
+98
+18
+230
+97
+5
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+220
+93
+11
+220
+93
+11
+224
+98
+18
+223
+103
+18
+226
+110
+35
+226
+110
+35
+225
+124
+48
+230
+128
+60
+231
+136
+72
+236
+147
+85
+241
+153
+96
+238
+159
+107
+238
+159
+107
+234
+168
+124
+234
+168
+124
+234
+168
+124
+234
+168
+124
+234
+168
+124
+238
+159
+107
+238
+159
+107
+241
+153
+96
+236
+147
+85
+231
+136
+72
+230
+128
+60
+230
+123
+57
+226
+110
+35
+226
+110
+35
+223
+103
+18
+224
+98
+18
+220
+93
+11
+220
+93
+11
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+220
+93
+11
+220
+93
+11
+224
+98
+18
+223
+103
+18
+226
+110
+35
+225
+124
+48
+230
+123
+57
+230
+128
+60
+231
+136
+72
+236
+147
+85
+241
+153
+96
+238
+159
+107
+238
+159
+107
+234
+168
+124
+234
+168
+124
+234
+168
+124
+234
+168
+124
+234
+168
+124
+238
+159
+107
+238
+159
+107
+241
+153
+96
+236
+147
+85
+231
+136
+72
+230
+128
+60
+225
+124
+48
+226
+110
+35
+226
+110
+35
+223
+103
+18
+224
+98
+18
+220
+93
+11
+220
+93
+11
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+220
+93
+11
+220
+93
+11
+220
+93
+11
+224
+98
+18
+223
+103
+18
+226
+110
+35
+226
+110
+35
+225
+124
+48
+230
+128
+60
+230
+128
+60
+231
+136
+72
+231
+136
+72
+236
+147
+85
+236
+147
+85
+236
+147
+85
+236
+147
+85
+236
+147
+85
+231
+136
+72
+231
+136
+72
+231
+136
+72
+230
+128
+60
+227
+126
+50
+225
+124
+48
+226
+110
+35
+223
+103
+18
+223
+103
+18
+224
+98
+18
+220
+93
+11
+220
+93
+11
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+218
+87
+5
+220
+93
+11
+220
+93
+11
+224
+98
+18
+223
+103
+18
+226
+110
+35
+226
+110
+35
+225
+124
+48
+230
+123
+57
+230
+128
+60
+231
+136
+72
+231
+136
+72
+231
+136
+72
+236
+147
+85
+236
+147
+85
+236
+147
+85
+236
+147
+85
+236
+147
+85
+231
+136
+72
+231
+136
+72
+230
+128
+60
+230
+123
+57
+225
+124
+48
+226
+110
+35
+226
+110
+35
+223
+103
+18
+224
+98
+18
+220
+93
+11
+220
+93
+11
+220
+93
+11
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+221
+89
+0
+217
+86
+3
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+221
+89
+0
+217
+86
+3
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+221
+89
+0
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+218
+87
+5
+218
+87
+5
+220
+93
+11
+220
+93
+11
+224
+98
+18
+223
+103
+18
+223
+103
+18
+226
+110
+35
+226
+110
+35
+225
+124
+48
+225
+124
+48
+225
+124
+48
+224
+123
+55
+224
+123
+55
+224
+123
+55
+230
+123
+57
+224
+123
+55
+224
+123
+55
+225
+124
+48
+225
+124
+48
+226
+110
+35
+226
+110
+35
+223
+103
+18
+223
+103
+18
+224
+98
+18
+220
+93
+11
+220
+93
+11
+218
+87
+5
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+221
+89
+0
+221
+89
+0
+217
+86
+3
+221
+89
+0
+221
+89
+0
+217
+86
+3
+221
+89
+0
+221
+89
+0
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+221
+89
+0
+221
+89
+0
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+217
+86
+3
+218
+87
+5
+218
+87
+5
+220
+93
+11
+220
+93
+11
+220
+93
+11
+224
+98
+18
+223
+103
+18
+226
+110
+35
+226
+110
+35
+226
+110
+35
+225
+124
+48
+225
+124
+48
+224
+123
+55
+230
+123
+57
+230
+123
+57
+230
+123
+57
+230
+123
+57
+230
+123
+57
+225
+124
+48
+225
+124
+48
+226
+110
+35
+226
+110
+35
+226
+110
+35
+223
+103
+18
+224
+98
+18
+224
+98
+18
+220
+93
+11
+220
+93
+11
+218
+87
+5
+218
+87
+5
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+218
+87
+5
+218
+87
+5
+218
+87
+5
+220
+93
+11
+220
+93
+11
+224
+98
+18
+224
+98
+18
+224
+98
+18
+223
+103
+18
+226
+110
+35
+226
+110
+35
+226
+110
+35
+226
+110
+35
+226
+110
+35
+226
+110
+35
+226
+110
+35
+226
+110
+35
+226
+110
+35
+223
+103
+18
+223
+103
+18
+224
+98
+18
+224
+98
+18
+220
+93
+11
+220
+93
+11
+218
+87
+5
+218
+87
+5
+218
+87
+5
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+218
+87
+5
+218
+87
+5
+218
+87
+5
+218
+87
+5
+220
+93
+11
+220
+93
+11
+224
+98
+18
+224
+98
+18
+223
+103
+18
+223
+103
+18
+226
+110
+35
+226
+110
+35
+226
+110
+35
+226
+110
+35
+226
+110
+35
+226
+110
+35
+226
+110
+35
+226
+110
+35
+226
+110
+35
+223
+103
+18
+224
+98
+18
+224
+98
+18
+220
+93
+11
+220
+93
+11
+220
+93
+11
+218
+87
+5
+218
+87
+5
+218
+87
+5
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+218
+87
+5
+218
+87
+5
+218
+87
+5
+218
+87
+5
+218
+87
+5
+220
+93
+11
+220
+93
+11
+220
+93
+11
+220
+93
+11
+224
+98
+18
+224
+98
+18
+224
+98
+18
+224
+98
+18
+224
+98
+18
+224
+98
+18
+220
+93
+11
+224
+98
+18
+220
+93
+11
+220
+93
+11
+220
+93
+11
+218
+87
+5
+218
+87
+5
+218
+87
+5
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+218
+87
+5
+217
+86
+3
+218
+87
+5
+218
+87
+5
+218
+87
+5
+220
+93
+11
+220
+93
+11
+220
+93
+11
+220
+93
+11
+220
+93
+11
+224
+98
+18
+224
+98
+18
+224
+98
+18
+224
+98
+18
+224
+98
+18
+220
+93
+11
+220
+93
+11
+220
+93
+11
+220
+93
+11
+220
+93
+11
+218
+87
+5
+218
+87
+5
+218
+87
+5
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+218
+87
+5
+218
+87
+5
+218
+87
+5
+218
+87
+5
+218
+87
+5
+218
+87
+5
+218
+87
+5
+218
+87
+5
+218
+87
+5
+218
+87
+5
+218
+87
+5
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+218
+87
+5
+218
+87
+5
+218
+87
+5
+218
+87
+5
+218
+87
+5
+218
+87
+5
+218
+87
+5
+218
+87
+5
+218
+87
+5
+218
+87
+5
+218
+87
+5
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+217
+86
+3
+217
+86
+3
+217
+86
+3
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+217
+86
+3
+217
+86
+3
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+217
+86
+3
+217
+86
+3
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+217
+86
+3
+217
+86
+3
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+217
+86
+3
+217
+86
+3
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+217
+86
+3
+217
+86
+3
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+217
+86
+3
+217
+86
+3
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+217
+86
+3
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+217
+86
+3
+217
+86
+3
+214
+84
+0
+214
+84
+0
+214
+84
+0
+217
+86
+3
+217
+86
+3
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+217
+86
+3
+217
+86
+3
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
diff --git a/recipes-bsp/linux/linux-omap-2.6.37rc/omap3-touchbook/defconfig b/recipes-bsp/linux/linux-omap-2.6.37rc/omap3-touchbook/defconfig
new file mode 120000
index 0000000..44e34a7
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-2.6.37rc/omap3-touchbook/defconfig
@@ -0,0 +1 @@
+../beagleboard/defconfig
\ No newline at end of file
diff --git a/recipes-bsp/linux/linux-omap-2.6.37rc/omap3evm/defconfig b/recipes-bsp/linux/linux-omap-2.6.37rc/omap3evm/defconfig
new file mode 120000
index 0000000..44e34a7
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-2.6.37rc/omap3evm/defconfig
@@ -0,0 +1 @@
+../beagleboard/defconfig
\ No newline at end of file
diff --git a/recipes-bsp/linux/linux-omap-2.6.37rc/overo/defconfig b/recipes-bsp/linux/linux-omap-2.6.37rc/overo/defconfig
new file mode 120000
index 0000000..44e34a7
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-2.6.37rc/overo/defconfig
@@ -0,0 +1 @@
+../beagleboard/defconfig
\ No newline at end of file
diff --git a/recipes-bsp/linux/linux-omap-2.6.37rc/usrp-e1xx/defconfig b/recipes-bsp/linux/linux-omap-2.6.37rc/usrp-e1xx/defconfig
new file mode 120000
index 0000000..44e34a7
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-2.6.37rc/usrp-e1xx/defconfig
@@ -0,0 +1 @@
+../beagleboard/defconfig
\ No newline at end of file
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0001-BeagleBoard-Adjust-USER-button-pin-for-xM.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0001-BeagleBoard-Adjust-USER-button-pin-for-xM.patch
new file mode 100644
index 0000000..af6c024
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0001-BeagleBoard-Adjust-USER-button-pin-for-xM.patch
@@ -0,0 +1,28 @@
+From 6fc2495bb9f1fa166f7f4190ecd0b988034f54ea Mon Sep 17 00:00:00 2001
+From: Jason Kridner <jkridner@beagleboard.org>
+Date: Sat, 17 Jul 2010 14:28:22 -0500
+Subject: [PATCH] BeagleBoard: Adjust USER button pin for xM
+
+---
+ arch/arm/mach-omap2/board-omap3beagle.c |    5 +++++
+ 1 files changed, 5 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index 7c9e40a..f93616b 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -829,6 +829,11 @@ static void __init omap3_beagle_init(void)
+ {
+ 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+ 	omap3_beagle_i2c_init();
++
++	if (cpu_is_omap3630()) {
++		gpio_buttons[0].gpio = 4;
++	}
++
+ 	platform_add_devices(omap3_beagle_devices,
+ 			ARRAY_SIZE(omap3_beagle_devices));
+ 	omap_serial_init();
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0001-Revert-omap3-beagle-Fix-compile-time-errors.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0001-Revert-omap3-beagle-Fix-compile-time-errors.patch
new file mode 100644
index 0000000..675501d
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0001-Revert-omap3-beagle-Fix-compile-time-errors.patch
@@ -0,0 +1,67 @@
+From aab782ab0942d6fd654311b937596b24a0ace3c6 Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@dominion.thruhere.net>
+Date: Fri, 30 Apr 2010 11:12:24 +0200
+Subject: [PATCH 01/45] Revert "omap3: beagle: Fix compile-time errors"
+
+This commit clashes with the other beagle patches we apply on top
+
+This reverts commit da5b291cba631d303cb137fa6a620c494d828197.
+---
+ arch/arm/mach-omap2/board-omap3beagle.c |   34 ++----------------------------
+ 1 files changed, 3 insertions(+), 31 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index 865a8d7..15e48f2 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -56,22 +56,6 @@
+ 
+ #define NAND_BLOCK_SIZE		SZ_128K
+ 
+-#ifdef CONFIG_PM
+-static struct omap_opp * _omap35x_mpu_rate_table	= omap35x_mpu_rate_table;
+-static struct omap_opp * _omap37x_mpu_rate_table	= omap37x_mpu_rate_table;
+-static struct omap_opp * _omap35x_dsp_rate_table	= omap35x_dsp_rate_table;
+-static struct omap_opp * _omap37x_dsp_rate_table	= omap37x_dsp_rate_table;
+-static struct omap_opp * _omap35x_l3_rate_table		= omap35x_l3_rate_table;
+-static struct omap_opp * _omap37x_l3_rate_table		= omap37x_l3_rate_table;
+-#else	/* CONFIG_PM */
+-static struct omap_opp * _omap35x_mpu_rate_table	= NULL;
+-static struct omap_opp * _omap37x_mpu_rate_table	= NULL;
+-static struct omap_opp * _omap35x_dsp_rate_table	= NULL;
+-static struct omap_opp * _omap37x_dsp_rate_table	= NULL;
+-static struct omap_opp * _omap35x_l3_rate_table		= NULL;
+-static struct omap_opp * _omap37x_l3_rate_table		= NULL;
+-#endif	/* CONFIG_PM */
+-
+ static struct mtd_partition omap3beagle_nand_partitions[] = {
+ 	/* All the partition sizes are listed in terms of NAND block size */
+ 	{
+@@ -377,21 +361,9 @@ static void __init omap3_beagle_init_irq(void)
+ {
+ 	omap_board_config = omap3_beagle_config;
+ 	omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
+-
+-	if (cpu_is_omap3630()) {
+-		omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+-						mt46h32m32lf6_sdrc_params,
+-						_omap37x_mpu_rate_table,
+-						_omap37x_dsp_rate_table,
+-						_omap37x_l3_rate_table);
+-	} else {
+-		omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+-						mt46h32m32lf6_sdrc_params,
+-						_omap35x_mpu_rate_table,
+-						_omap35x_dsp_rate_table,
+-						_omap35x_l3_rate_table);
+-	}
+-
++	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
++			     mt46h32m32lf6_sdrc_params, omap3_mpu_rate_table,
++			     omap3_dsp_rate_table, omap3_l3_rate_table);
+ 	omap_init_irq();
+ #ifdef CONFIG_OMAP_32K_TIMER
+ 	omap2_gp_clockevent_set_gptimer(12);
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0002-board-omap3touchbook-make-it-build-against-TI-linux-.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0002-board-omap3touchbook-make-it-build-against-TI-linux-.patch
new file mode 100644
index 0000000..d9fb77b
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0002-board-omap3touchbook-make-it-build-against-TI-linux-.patch
@@ -0,0 +1,61 @@
+From 06352060e3862e2c11719a6ef4ac0ae1b5f5fdf6 Mon Sep 17 00:00:00 2001
+From: Koen Kooi <k-kooi@ti.com>
+Date: Sat, 30 Jan 2010 15:49:15 +0100
+Subject: [PATCH 02/45] board-omap3touchbook: make it build against TI linux-omap 2.6.32-PSP
+
+---
+ arch/arm/mach-omap2/board-omap3touchbook.c |   11 +++++++++--
+ 1 files changed, 9 insertions(+), 2 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
+index fe3d22c..fc3e03c 100644
+--- a/arch/arm/mach-omap2/board-omap3touchbook.c
++++ b/arch/arm/mach-omap2/board-omap3touchbook.c
+@@ -21,6 +21,7 @@
+ #include <linux/io.h>
+ #include <linux/leds.h>
+ #include <linux/gpio.h>
++#include <linux/irq.h>
+ #include <linux/input.h>
+ #include <linux/gpio_keys.h>
+ 
+@@ -48,12 +49,18 @@
+ #include <plat/nand.h>
+ #include <plat/usb.h>
+ #include <plat/timer-gp.h>
++#include <plat/clock.h>
++#include <plat/omap-pm.h>
+ 
+ #include "mux.h"
+ #include "mmc-twl4030.h"
+ 
++#include "pm.h"
++#include "omap3-opp.h"
++
+ #include <asm/setup.h>
+ 
++
+ #define GPMC_CS0_BASE  0x60
+ #define GPMC_CS_SIZE   0x30
+ 
+@@ -78,7 +85,6 @@ static struct mtd_partition omap3touchbook_nand_partitions[] = {
+ 		.name		= "U-Boot",
+ 		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
+ 		.size		= 15 * NAND_BLOCK_SIZE,
+-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+ 	},
+ 	{
+ 		.name		= "U-Boot Env",
+@@ -440,7 +446,8 @@ static void __init omap3_touchbook_init_irq(void)
+ 	omap_board_config = omap3_touchbook_config;
+ 	omap_board_config_size = ARRAY_SIZE(omap3_touchbook_config);
+ 	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+-			     mt46h32m32lf6_sdrc_params);
++			     mt46h32m32lf6_sdrc_params, omap35x_mpu_rate_table,
++			     omap35x_dsp_rate_table, omap35x_l3_rate_table);
+ 	omap_init_irq();
+ #ifdef CONFIG_OMAP_32K_TIMER
+ 	omap2_gp_clockevent_set_gptimer(12);
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0003-ARM-OMAP-add-support-for-TCT-Zippy-to-Beagle-board-f.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0003-ARM-OMAP-add-support-for-TCT-Zippy-to-Beagle-board-f.patch
new file mode 100644
index 0000000..d2e6763
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0003-ARM-OMAP-add-support-for-TCT-Zippy-to-Beagle-board-f.patch
@@ -0,0 +1,135 @@
+From 4afa80923880088a3d6780257ccce72a88884e19 Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <sakoman@gmail.com>
+Date: Tue, 15 Dec 2009 15:34:29 -0800
+Subject: [PATCH 03/45] ARM: OMAP: add support for TCT Zippy to Beagle board file
+
+Signed-off-by: Steve Sakoman <sakoman@gmail.com>
+---
+ arch/arm/mach-omap2/board-omap3beagle.c |   74 +++++++++++++++++++++++++++++-
+ 1 files changed, 71 insertions(+), 3 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index 15e48f2..a4a793f 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -21,6 +21,7 @@
+ #include <linux/io.h>
+ #include <linux/leds.h>
+ #include <linux/gpio.h>
++#include <linux/irq.h>
+ #include <linux/input.h>
+ #include <linux/gpio_keys.h>
+ 
+@@ -56,6 +57,49 @@
+ 
+ #define NAND_BLOCK_SIZE		SZ_128K
+ 
++#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
++
++#include <plat/mcspi.h>
++#include <linux/spi/spi.h>
++
++#define OMAP3BEAGLE_GPIO_ENC28J60_IRQ 157
++
++static struct omap2_mcspi_device_config enc28j60_spi_chip_info = {
++	.turbo_mode	= 0,
++	.single_channel	= 1,	/* 0: slave, 1: master */
++};
++
++static struct spi_board_info omap3beagle_spi_board_info[] __initdata = {
++	{
++		.modalias		= "enc28j60",
++		.bus_num		= 4,
++		.chip_select		= 0,
++		.max_speed_hz		= 20000000,
++		.controller_data	= &enc28j60_spi_chip_info,
++	},
++};
++
++static void __init omap3beagle_enc28j60_init(void)
++{
++	if ((gpio_request(OMAP3BEAGLE_GPIO_ENC28J60_IRQ, "ENC28J60_IRQ") == 0) &&
++	    (gpio_direction_input(OMAP3BEAGLE_GPIO_ENC28J60_IRQ) == 0)) {
++		gpio_export(OMAP3BEAGLE_GPIO_ENC28J60_IRQ, 0);
++		omap3beagle_spi_board_info[0].irq	= OMAP_GPIO_IRQ(OMAP3BEAGLE_GPIO_ENC28J60_IRQ);
++		set_irq_type(omap3beagle_spi_board_info[0].irq, IRQ_TYPE_EDGE_FALLING);
++	} else {
++		printk(KERN_ERR "could not obtain gpio for ENC28J60_IRQ\n");
++		return;
++	}
++
++	spi_register_board_info(omap3beagle_spi_board_info,
++			ARRAY_SIZE(omap3beagle_spi_board_info));
++}
++
++#else
++static inline void __init omap3beagle_enc28j60_init(void) { return; }
++#endif
++
++
+ static struct mtd_partition omap3beagle_nand_partitions[] = {
+ 	/* All the partition sizes are listed in terms of NAND block size */
+ 	{
+@@ -118,6 +162,14 @@ static struct twl4030_hsmmc_info mmc[] = {
+ 		.wires		= 8,
+ 		.gpio_wp	= 29,
+ 	},
++	{
++		.mmc		= 2,
++		.wires		= 4,
++		.gpio_wp	= 141,
++		.gpio_cd	= 162,
++		.transceiver	= true,
++		.ocr_mask	= 0x00100000,	/* 3.3V */
++	},
+ 	{}	/* Terminator */
+ };
+ 
+@@ -281,7 +333,7 @@ static struct twl4030_platform_data beagle_twldata = {
+ 	.vpll2		= &beagle_vpll2,
+ };
+ 
+-static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = {
++static struct i2c_board_info __initdata beagle_i2c1_boardinfo[] = {
+ 	{
+ 		I2C_BOARD_INFO("twl4030", 0x48),
+ 		.flags = I2C_CLIENT_WAKE,
+@@ -290,10 +342,24 @@ static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = {
+ 	},
+ };
+ 
++#if defined(CONFIG_RTC_DRV_DS1307) || \
++	defined(CONFIG_RTC_DRV_DS1307_MODULE)
++
++static struct i2c_board_info __initdata beagle_i2c2_boardinfo[] = {
++	{
++		I2C_BOARD_INFO("ds1307", 0x68),
++	},
++};
++#else
++static struct i2c_board_info __initdata beagle_i2c2_boardinfo[] = {};
++#endif
++
+ static int __init omap3_beagle_i2c_init(void)
+ {
+-	omap_register_i2c_bus(1, 2600, beagle_i2c_boardinfo,
+-			ARRAY_SIZE(beagle_i2c_boardinfo));
++	omap_register_i2c_bus(1, 2600, beagle_i2c1_boardinfo,
++			ARRAY_SIZE(beagle_i2c1_boardinfo));
++	omap_register_i2c_bus(2, 400,  beagle_i2c2_boardinfo,
++			ARRAY_SIZE(beagle_i2c2_boardinfo));
+ 	/* Bus 3 is attached to the DVI port where devices like the pico DLP
+ 	 * projector don't work reliably with 400kHz */
+ 	omap_register_i2c_bus(3, 100, NULL, 0);
+@@ -453,6 +519,8 @@ static void __init omap3_beagle_init(void)
+ 	/* REVISIT leave DVI powered down until it's needed ... */
+ 	gpio_direction_output(170, true);
+ 
++	omap3beagle_enc28j60_init();
++
+ 	usb_musb_init();
+ 	usb_ehci_init(&ehci_pdata);
+ 	omap3beagle_flash_init();
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0004-ARM-OMAP-Make-beagle-u-boot-partition-writable.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0004-ARM-OMAP-Make-beagle-u-boot-partition-writable.patch
new file mode 100644
index 0000000..97439a0
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0004-ARM-OMAP-Make-beagle-u-boot-partition-writable.patch
@@ -0,0 +1,24 @@
+From ef987a45a496dad17bafb2dead78513a7f820dc8 Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Thu, 17 Dec 2009 12:40:24 -0800
+Subject: [PATCH 04/45] ARM: OMAP: Make beagle u-boot partition writable
+
+---
+ arch/arm/mach-omap2/board-omap3beagle.c |    1 -
+ 1 files changed, 0 insertions(+), 1 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index a4a793f..4b2dd65 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -112,7 +112,6 @@ static struct mtd_partition omap3beagle_nand_partitions[] = {
+ 		.name		= "U-Boot",
+ 		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
+ 		.size		= 15 * NAND_BLOCK_SIZE,
+-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+ 	},
+ 	{
+ 		.name		= "U-Boot Env",
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0005-board-omap3-beagle-add-DSS2-support.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0005-board-omap3-beagle-add-DSS2-support.patch
new file mode 100644
index 0000000..02c3fba
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0005-board-omap3-beagle-add-DSS2-support.patch
@@ -0,0 +1,200 @@
+From 3915909dbac222212ee97bd6c8057df442a85bd3 Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@dominion.thruhere.net>
+Date: Wed, 10 Feb 2010 15:07:36 +0100
+Subject: [PATCH 05/45] board-omap3-beagle: add DSS2 support
+
+---
+ arch/arm/mach-omap2/board-omap3beagle.c |  130 ++++++++++++++++++++++++-------
+ 1 files changed, 103 insertions(+), 27 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index 4b2dd65..79d43d0 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -40,6 +40,7 @@
+ 
+ #include <plat/board.h>
+ #include <plat/common.h>
++#include <plat/display.h>
+ #include <plat/gpmc.h>
+ #include <plat/nand.h>
+ #include <plat/usb.h>
+@@ -153,6 +154,105 @@ static struct platform_device omap3beagle_nand_device = {
+ 	.resource	= &omap3beagle_nand_resource,
+ };
+ 
++/* DSS */
++
++static int beagle_enable_dvi(struct omap_dss_device *dssdev)
++{
++	if (dssdev->reset_gpio != -1)
++		gpio_set_value(dssdev->reset_gpio, 1);
++
++	return 0;
++}
++
++static void beagle_disable_dvi(struct omap_dss_device *dssdev)
++{
++	if (dssdev->reset_gpio != -1)
++		gpio_set_value(dssdev->reset_gpio, 0);
++}
++
++static struct omap_dss_device beagle_dvi_device = {
++	.type = OMAP_DISPLAY_TYPE_DPI,
++	.name = "dvi",
++	.driver_name = "generic_panel",
++	.phy.dpi.data_lines = 24,
++	.reset_gpio = 170,
++	.platform_enable = beagle_enable_dvi,
++	.platform_disable = beagle_disable_dvi,
++};
++
++static int beagle_panel_enable_tv(struct omap_dss_device *dssdev)
++{
++#define ENABLE_VDAC_DEDICATED           0x03
++#define ENABLE_VDAC_DEV_GRP             0x20
++
++	twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
++			ENABLE_VDAC_DEDICATED,
++			TWL4030_VDAC_DEDICATED);
++	twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
++			ENABLE_VDAC_DEV_GRP, TWL4030_VDAC_DEV_GRP);
++
++	return 0;
++}
++
++static void beagle_panel_disable_tv(struct omap_dss_device *dssdev)
++{
++	twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00,
++			TWL4030_VDAC_DEDICATED);
++	twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00,
++			TWL4030_VDAC_DEV_GRP);
++}
++
++static struct omap_dss_device beagle_tv_device = {
++	.name = "tv",
++	.driver_name = "venc",
++	.type = OMAP_DISPLAY_TYPE_VENC,
++	.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
++	.platform_enable = beagle_panel_enable_tv,
++	.platform_disable = beagle_panel_disable_tv,
++};
++
++static struct omap_dss_device *beagle_dss_devices[] = {
++	&beagle_dvi_device,
++	&beagle_tv_device,
++};
++
++static struct omap_dss_board_info beagle_dss_data = {
++	.num_devices = ARRAY_SIZE(beagle_dss_devices),
++	.devices = beagle_dss_devices,
++	.default_device = &beagle_dvi_device,
++};
++
++static struct platform_device beagle_dss_device = {
++	.name          = "omapdss",
++	.id            = -1,
++	.dev            = {
++		.platform_data = &beagle_dss_data,
++	},
++};
++
++static struct regulator_consumer_supply beagle_vdac_supply = {
++	.supply		= "vdda_dac",
++	.dev		= &beagle_dss_device.dev,
++};
++
++static struct regulator_consumer_supply beagle_vdvi_supply = {
++	.supply		= "vdds_dsi",
++	.dev		= &beagle_dss_device.dev,
++};
++
++static void __init beagle_display_init(void)
++{
++	int r;
++
++	r = gpio_request(beagle_dvi_device.reset_gpio, "DVI reset");
++	if (r < 0) {
++		printk(KERN_ERR "Unable to get DVI reset GPIO\n");
++		return;
++	}
++
++	gpio_direction_output(beagle_dvi_device.reset_gpio, 0);
++}
++
+ #include "sdram-micron-mt46h32m32lf-6.h"
+ 
+ static struct twl4030_hsmmc_info mmc[] = {
+@@ -172,15 +272,6 @@ static struct twl4030_hsmmc_info mmc[] = {
+ 	{}	/* Terminator */
+ };
+ 
+-static struct platform_device omap3_beagle_lcd_device = {
+-	.name		= "omap3beagle_lcd",
+-	.id		= -1,
+-};
+-
+-static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
+-	.ctrl_name	= "internal",
+-};
+-
+ static struct regulator_consumer_supply beagle_vmmc1_supply = {
+ 	.supply			= "vmmc",
+ };
+@@ -236,16 +327,6 @@ static struct twl4030_gpio_platform_data beagle_gpio_data = {
+ 	.setup		= beagle_twl_gpio_setup,
+ };
+ 
+-static struct regulator_consumer_supply beagle_vdac_supply = {
+-	.supply		= "vdac",
+-	.dev		= &omap3_beagle_lcd_device.dev,
+-};
+-
+-static struct regulator_consumer_supply beagle_vdvi_supply = {
+-	.supply		= "vdvi",
+-	.dev		= &omap3_beagle_lcd_device.dev,
+-};
+-
+ /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+ static struct regulator_init_data beagle_vmmc1 = {
+ 	.constraints = {
+@@ -418,14 +499,8 @@ static struct platform_device keys_gpio = {
+ 	},
+ };
+ 
+-static struct omap_board_config_kernel omap3_beagle_config[] __initdata = {
+-	{ OMAP_TAG_LCD,		&omap3_beagle_lcd_config },
+-};
+-
+ static void __init omap3_beagle_init_irq(void)
+ {
+-	omap_board_config = omap3_beagle_config;
+-	omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
+ 	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+ 			     mt46h32m32lf6_sdrc_params, omap3_mpu_rate_table,
+ 			     omap3_dsp_rate_table, omap3_l3_rate_table);
+@@ -437,9 +512,9 @@ static void __init omap3_beagle_init_irq(void)
+ }
+ 
+ static struct platform_device *omap3_beagle_devices[] __initdata = {
+-	&omap3_beagle_lcd_device,
+ 	&leds_gpio,
+ 	&keys_gpio,
++	&beagle_dss_device,
+ };
+ 
+ static void __init omap3beagle_flash_init(void)
+@@ -527,8 +602,9 @@ static void __init omap3_beagle_init(void)
+ 	/* Ensure SDRC pins are mux'd for self-refresh */
+ 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+ 	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
+-}
+ 
++	beagle_display_init();
++}
+ static void __init omap3_beagle_map_io(void)
+ {
+ 	omap2_set_globals_343x();
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0006-board-omap3beagle-prepare-for-DM3730-based-Beagleboa.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0006-board-omap3beagle-prepare-for-DM3730-based-Beagleboa.patch
new file mode 100644
index 0000000..10e728b
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0006-board-omap3beagle-prepare-for-DM3730-based-Beagleboa.patch
@@ -0,0 +1,103 @@
+From f8b1eeb8f3dc580f24b5d2a2b140c74cfa88c5eb Mon Sep 17 00:00:00 2001
+From: Koen Kooi <k-kooi@ti.com>
+Date: Wed, 27 Jan 2010 21:57:13 +0100
+Subject: [PATCH 06/45] board-omap3beagle: prepare for DM3730 based BeagleboardXM
+
+* OPP changes copy/pasted from board-omap3evm.c
+	* EHCI changes copy/pasted from Steve Kipisz' 2.6.33rcX work
+	* turn on power to camera on boot and add some comments
+---
+ arch/arm/mach-omap2/board-omap3beagle.c |   62 +++++++++++++++++++++++++++----
+ 1 files changed, 54 insertions(+), 8 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index 79d43d0..b1e4d73 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -53,6 +53,23 @@
+ #include "pm.h"
+ #include "omap3-opp.h"
+ 
++#ifdef CONFIG_PM
++static struct omap_opp * _omap35x_mpu_rate_table        = omap35x_mpu_rate_table;
++static struct omap_opp * _omap37x_mpu_rate_table        = omap37x_mpu_rate_table;
++static struct omap_opp * _omap35x_dsp_rate_table        = omap35x_dsp_rate_table;
++static struct omap_opp * _omap37x_dsp_rate_table        = omap37x_dsp_rate_table;
++static struct omap_opp * _omap35x_l3_rate_table         = omap35x_l3_rate_table;
++static struct omap_opp * _omap37x_l3_rate_table         = omap37x_l3_rate_table;
++#else   /* CONFIG_PM */
++static struct omap_opp * _omap35x_mpu_rate_table        = NULL;
++static struct omap_opp * _omap37x_mpu_rate_table        = NULL;
++static struct omap_opp * _omap35x_dsp_rate_table        = NULL;
++static struct omap_opp * _omap37x_dsp_rate_table        = NULL;
++static struct omap_opp * _omap35x_l3_rate_table         = NULL;
++static struct omap_opp * _omap37x_l3_rate_table         = NULL;
++#endif  /* CONFIG_PM */
++
++
+ #define GPMC_CS0_BASE  0x60
+ #define GPMC_CS_SIZE   0x30
+ 
+@@ -303,12 +320,28 @@ static int beagle_twl_gpio_setup(struct device *dev,
+ 	 * power switch and overcurrent detect
+ 	 */
+ 
+-	gpio_request(gpio + 1, "EHCI_nOC");
+-	gpio_direction_input(gpio + 1);
++	if (cpu_is_omap3630()) {
++		/* Power on DVI, Serial and PWR led */ 
++ 		gpio_request(gpio + 1, "nDVI_PWR_EN");
++		gpio_direction_output(gpio + 1, 0);	
++
++		/* Power on camera interface */
++		gpio_request(gpio + 2, "CAM_EN");
++		gpio_direction_output(gpio + 2, 1);
++
++		/* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
++		gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
++		gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1);
++	}
++	else {
++		gpio_request(gpio + 1, "EHCI_nOC");
++		gpio_direction_input(gpio + 1);
++
++		/* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
++		gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
++		gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
++	}
+ 
+-	/* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
+-	gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
+-	gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
+ 
+ 	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
+ 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+@@ -501,9 +534,22 @@ static struct platform_device keys_gpio = {
+ 
+ static void __init omap3_beagle_init_irq(void)
+ {
+-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+-			     mt46h32m32lf6_sdrc_params, omap3_mpu_rate_table,
+-			     omap3_dsp_rate_table, omap3_l3_rate_table);
++        if (cpu_is_omap3630())
++        {
++                omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
++                                        NULL,
++                                        _omap37x_mpu_rate_table,
++                                        _omap37x_dsp_rate_table,
++                                        _omap37x_l3_rate_table);
++        }
++        else
++        {
++                omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
++                                        NULL,
++                                        _omap35x_mpu_rate_table,
++                                        _omap35x_dsp_rate_table,
++                                        _omap35x_l3_rate_table);
++        }
+ 	omap_init_irq();
+ #ifdef CONFIG_OMAP_32K_TIMER
+ 	omap2_gp_clockevent_set_gptimer(12);
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0007-ARM-OMAP-beagleboard-Add-infrastructure-to-do-fixups.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0007-ARM-OMAP-beagleboard-Add-infrastructure-to-do-fixups.patch
new file mode 100644
index 0000000..feea7fe
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0007-ARM-OMAP-beagleboard-Add-infrastructure-to-do-fixups.patch
@@ -0,0 +1,172 @@
+From 902bf175d5050e9f9892b594bd6093b65c1be8cc Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@dominion.thruhere.net>
+Date: Mon, 3 May 2010 14:41:29 +0200
+Subject: [PATCH 07/45] ARM: OMAP: beagleboard: Add infrastructure to do fixups based on expansionboard name passed by u-boot
+
+And add support for zippy2
+---
+ arch/arm/mach-omap2/board-omap3beagle.c |   88 +++++++++++++++++++++++++++----
+ 1 files changed, 78 insertions(+), 10 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index b1e4d73..8223763 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -75,6 +75,8 @@ static struct omap_opp * _omap37x_l3_rate_table         = NULL;
+ 
+ #define NAND_BLOCK_SIZE		SZ_128K
+ 
++char expansionboard_name[16];
++
+ #if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
+ 
+ #include <plat/mcspi.h>
+@@ -87,7 +89,7 @@ static struct omap2_mcspi_device_config enc28j60_spi_chip_info = {
+ 	.single_channel	= 1,	/* 0: slave, 1: master */
+ };
+ 
+-static struct spi_board_info omap3beagle_spi_board_info[] __initdata = {
++static struct spi_board_info omap3beagle_zippy_spi_board_info[] __initdata = {
+ 	{
+ 		.modalias		= "enc28j60",
+ 		.bus_num		= 4,
+@@ -102,21 +104,62 @@ static void __init omap3beagle_enc28j60_init(void)
+ 	if ((gpio_request(OMAP3BEAGLE_GPIO_ENC28J60_IRQ, "ENC28J60_IRQ") == 0) &&
+ 	    (gpio_direction_input(OMAP3BEAGLE_GPIO_ENC28J60_IRQ) == 0)) {
+ 		gpio_export(OMAP3BEAGLE_GPIO_ENC28J60_IRQ, 0);
+-		omap3beagle_spi_board_info[0].irq	= OMAP_GPIO_IRQ(OMAP3BEAGLE_GPIO_ENC28J60_IRQ);
+-		set_irq_type(omap3beagle_spi_board_info[0].irq, IRQ_TYPE_EDGE_FALLING);
++		omap3beagle_zippy_spi_board_info[0].irq	= OMAP_GPIO_IRQ(OMAP3BEAGLE_GPIO_ENC28J60_IRQ);
++		set_irq_type(omap3beagle_zippy_spi_board_info[0].irq, IRQ_TYPE_EDGE_FALLING);
+ 	} else {
+ 		printk(KERN_ERR "could not obtain gpio for ENC28J60_IRQ\n");
+ 		return;
+ 	}
+ 
+-	spi_register_board_info(omap3beagle_spi_board_info,
+-			ARRAY_SIZE(omap3beagle_spi_board_info));
++	spi_register_board_info(omap3beagle_zippy_spi_board_info,
++			ARRAY_SIZE(omap3beagle_zippy_spi_board_info));
+ }
+ 
+ #else
+ static inline void __init omap3beagle_enc28j60_init(void) { return; }
+ #endif
+ 
++#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
++
++#include <plat/mcspi.h>
++#include <linux/spi/spi.h>
++
++#define OMAP3BEAGLE_GPIO_KS8851_IRQ 157
++
++static struct omap2_mcspi_device_config ks8851_spi_chip_info = {
++	.turbo_mode	= 0,
++	.single_channel	= 1,	/* 0: slave, 1: master */
++};
++
++static struct spi_board_info omap3beagle_zippy2_spi_board_info[] __initdata = {
++	{
++		.modalias		= "ks8851",
++		.bus_num		= 4,
++		.chip_select		= 0,
++		.max_speed_hz		= 36000000,
++		.controller_data	= &ks8851_spi_chip_info,
++	},
++};
++
++static void __init omap3beagle_ks8851_init(void)
++{
++	if ((gpio_request(OMAP3BEAGLE_GPIO_KS8851_IRQ, "KS8851_IRQ") == 0) &&
++	    (gpio_direction_input(OMAP3BEAGLE_GPIO_KS8851_IRQ) == 0)) {
++		gpio_export(OMAP3BEAGLE_GPIO_KS8851_IRQ, 0);
++		omap3beagle_zippy2_spi_board_info[0].irq	= OMAP_GPIO_IRQ(OMAP3BEAGLE_GPIO_KS8851_IRQ);
++		set_irq_type(omap3beagle_zippy2_spi_board_info[0].irq, IRQ_TYPE_EDGE_FALLING);
++	} else {
++		printk(KERN_ERR "could not obtain gpio for KS8851_IRQ\n");
++		return;
++	}
++	
++	spi_register_board_info(omap3beagle_zippy2_spi_board_info,
++							ARRAY_SIZE(omap3beagle_zippy2_spi_board_info));
++}
++
++#else
++static inline void __init omap3beagle_ks8851_init(void) { return; }
++#endif
+ 
+ static struct mtd_partition omap3beagle_nand_partitions[] = {
+ 	/* All the partition sizes are listed in terms of NAND block size */
+@@ -281,8 +324,6 @@ static struct twl4030_hsmmc_info mmc[] = {
+ 	{
+ 		.mmc		= 2,
+ 		.wires		= 4,
+-		.gpio_wp	= 141,
+-		.gpio_cd	= 162,
+ 		.transceiver	= true,
+ 		.ocr_mask	= 0x00100000,	/* 3.3V */
+ 	},
+@@ -601,7 +642,7 @@ static void __init omap3beagle_flash_init(void)
+ 	}
+ }
+ 
+-static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
++static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
+ 
+ 	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+ 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+@@ -621,6 +662,15 @@ static struct omap_board_mux board_mux[] __initdata = {
+ #define board_mux	NULL
+ #endif
+ 
++static int __init expansionboard_setup(char *str)
++{
++	if (!str)
++		return -EINVAL;
++	strncpy(expansionboard_name, str, 16);
++	printk(KERN_INFO "Beagle expansionboard: %s\n", expansionboard_name);
++	return 0;
++}
++
+ static void __init omap3_beagle_init(void)
+ {
+ 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+@@ -639,8 +689,24 @@ static void __init omap3_beagle_init(void)
+ 	/* REVISIT leave DVI powered down until it's needed ... */
+ 	gpio_direction_output(170, true);
+ 
+-	omap3beagle_enc28j60_init();
+-
++	if(!strcmp(expansionboard_name, "zippy")) 
++	{
++		printk(KERN_INFO "Beagle expansionboard: initializing enc28j60\n");
++		omap3beagle_enc28j60_init();
++		printk(KERN_INFO "Beagle expansionboard: assigning GPIO 141 and 162 to MMC1\n");
++		mmc[1].gpio_wp = 141;
++		mmc[1].gpio_cd = 162;
++	}
++	
++	if(!strcmp(expansionboard_name, "zippy2")) 
++	{
++		printk(KERN_INFO "Beagle expansionboard: initializing ks_8851\n");
++		omap3beagle_ks8851_init();
++		printk(KERN_INFO "Beagle expansionboard: assigning GPIO 141 and 162 to MMC1\n");
++		mmc[1].gpio_wp = 141;
++		mmc[1].gpio_cd = 162;
++	}
++	
+ 	usb_musb_init();
+ 	usb_ehci_init(&ehci_pdata);
+ 	omap3beagle_flash_init();
+@@ -657,6 +723,8 @@ static void __init omap3_beagle_map_io(void)
+ 	omap2_map_common_io();
+ }
+ 
++early_param("buddy", expansionboard_setup);
++
+ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
+ 	/* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
+ 	.phys_io	= 0x48000000,
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0008-ARM-OMAP-beagleboard-pre-export-GPIOs-to-userspace-w.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0008-ARM-OMAP-beagleboard-pre-export-GPIOs-to-userspace-w.patch
new file mode 100644
index 0000000..3cf6d8d
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0008-ARM-OMAP-beagleboard-pre-export-GPIOs-to-userspace-w.patch
@@ -0,0 +1,57 @@
+From 35b951339ea47b542c548e102768817d4123a24b Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@dominion.thruhere.net>
+Date: Mon, 3 May 2010 21:38:34 +0200
+Subject: [PATCH 08/45] ARM: OMAP: beagleboard: pre-export GPIOs to userspace when using a Tincantools trainerboard
+
+This really needs a for loop, patches welcome
+---
+ arch/arm/mach-omap2/board-omap3beagle.c |   33 ++++++++++++++++++++++++++++++-
+ 1 files changed, 32 insertions(+), 1 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index 8223763..abbc1b2 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -706,7 +706,38 @@ static void __init omap3_beagle_init(void)
+ 		mmc[1].gpio_wp = 141;
+ 		mmc[1].gpio_cd = 162;
+ 	}
+-	
++
++	if(!strcmp(expansionboard_name, "trainer"))
++	{
++		printk(KERN_INFO "Beagle expansionboard: exporting GPIOs 130-141,162 to userspace\n");
++		gpio_request(130, "sysfs");
++		gpio_export(130, 1);
++		gpio_request(131, "sysfs");
++		gpio_export(131, 1);
++		gpio_request(132, "sysfs");
++		gpio_export(132, 1);
++		gpio_request(133, "sysfs");
++		gpio_export(133, 1);
++		gpio_request(134, "sysfs");
++		gpio_export(134, 1);
++		gpio_request(135, "sysfs");
++		gpio_export(135, 1);
++		gpio_request(136, "sysfs");
++		gpio_export(136, 1);
++		gpio_request(137, "sysfs");
++		gpio_export(137, 1);
++		gpio_request(138, "sysfs");
++		gpio_export(138, 1);
++		gpio_request(139, "sysfs");
++		gpio_export(139, 1);
++		gpio_request(140, "sysfs");
++		gpio_export(140, 1);
++		gpio_request(141, "sysfs");
++		gpio_export(141, 1);
++		gpio_request(162, "sysfs");
++		gpio_export(162, 1);
++	}
++
+ 	usb_musb_init();
+ 	usb_ehci_init(&ehci_pdata);
+ 	omap3beagle_flash_init();
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0009-ARM-OMAP-beagleboard-initialize-ds1307-and-eeprom-on.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0009-ARM-OMAP-beagleboard-initialize-ds1307-and-eeprom-on.patch
new file mode 100644
index 0000000..3729aec
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0009-ARM-OMAP-beagleboard-initialize-ds1307-and-eeprom-on.patch
@@ -0,0 +1,76 @@
+From 9b98719bf7787f1ec8eef6b09cb5b94100de7d12 Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@dominion.thruhere.net>
+Date: Mon, 3 May 2010 22:31:34 +0200
+Subject: [PATCH 09/45] ARM: OMAP: beagleboard: initialize ds1307 and eeprom only for zippy and zippy2
+
+---
+ arch/arm/mach-omap2/board-omap3beagle.c |   39 +++++++++++++++++++++++++++---
+ 1 files changed, 35 insertions(+), 4 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index abbc1b2..cb11b07 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -496,24 +496,55 @@ static struct i2c_board_info __initdata beagle_i2c1_boardinfo[] = {
+ 	},
+ };
+ 
++	
++#if defined(CONFIG_EEPROM_AT24) || defined(CONFIG_EEPROM_AT24_MODULE)
++#include <linux/i2c/at24.h>
++
++static struct at24_platform_data m24c01 = {
++	        .byte_len       = SZ_1K / 8,
++	        .page_size      = 16,
++};
++
+ #if defined(CONFIG_RTC_DRV_DS1307) || \
+ 	defined(CONFIG_RTC_DRV_DS1307_MODULE)
+ 
+-static struct i2c_board_info __initdata beagle_i2c2_boardinfo[] = {
++static struct i2c_board_info __initdata beagle_zippy_i2c2_boardinfo[] = {
+ 	{
+ 		I2C_BOARD_INFO("ds1307", 0x68),
+ 	},
++	{
++		I2C_BOARD_INFO("24c01", 0x50),
++		.platform_data	= &m24c01,
++	},
+ };
+ #else
+-static struct i2c_board_info __initdata beagle_i2c2_boardinfo[] = {};
++static struct i2c_board_info __initdata beagle_zippy_i2c2_boardinfo[] = {
++	{
++		I2C_BOARD_INFO("24c01", 0x50),
++		.platform_data  = &m24c01,
++	},
++};
++#endif
++#else
++static struct i2c_board_info __initdata beagle_zippy_i2c2_boardinfo[] = {};
+ #endif
+ 
++static struct i2c_board_info __initdata beagle_i2c2_boardinfo[] = {};
++
+ static int __init omap3_beagle_i2c_init(void)
+ {
+ 	omap_register_i2c_bus(1, 2600, beagle_i2c1_boardinfo,
+ 			ARRAY_SIZE(beagle_i2c1_boardinfo));
+-	omap_register_i2c_bus(2, 400,  beagle_i2c2_boardinfo,
+-			ARRAY_SIZE(beagle_i2c2_boardinfo));
++	if(!strcmp(expansionboard_name, "zippy") || !strcmp(expansionboard_name, "zippy2")) 
++	{
++		printk(KERN_INFO "Beagle expansionboard: registering i2c2 bus for zippy/zippy2\n");
++		omap_register_i2c_bus(2, 400,  beagle_zippy_i2c2_boardinfo,
++				ARRAY_SIZE(beagle_zippy_i2c2_boardinfo));
++	} else
++	{
++		omap_register_i2c_bus(2, 400,  beagle_i2c2_boardinfo,
++				ARRAY_SIZE(beagle_i2c2_boardinfo));
++	}
+ 	/* Bus 3 is attached to the DVI port where devices like the pico DLP
+ 	 * projector don't work reliably with 400kHz */
+ 	omap_register_i2c_bus(3, 100, NULL, 0);
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0010-ARM-OMAP-update-beagleboard-defconfig.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0010-ARM-OMAP-update-beagleboard-defconfig.patch
new file mode 100644
index 0000000..89bd4ee
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0010-ARM-OMAP-update-beagleboard-defconfig.patch
@@ -0,0 +1,3323 @@
+From f1e6a762a7bf8d7ff7700011f60a005f28025239 Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@dominion.thruhere.net>
+Date: Tue, 27 Apr 2010 10:51:15 +0200
+Subject: [PATCH 10/45] ARM: OMAP: update beagleboard defconfig
+
+---
+ arch/arm/configs/omap3_beagle_defconfig | 2514 +++++++++++++++++++++++++------
+ 1 files changed, 2088 insertions(+), 426 deletions(-)
+
+diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig
+index 9cfae37..adb4f8c 100644
+--- a/arch/arm/configs/omap3_beagle_defconfig
++++ b/arch/arm/configs/omap3_beagle_defconfig
+@@ -1,15 +1,13 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.27-rc8
+-# Wed Oct  1 17:14:22 2008
++# Linux kernel version: 2.6.32
++# Mon Apr 26 16:59:04 2010
+ #
+ CONFIG_ARM=y
+ CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+ CONFIG_GENERIC_GPIO=y
+ CONFIG_GENERIC_TIME=y
+ CONFIG_GENERIC_CLOCKEVENTS=y
+-CONFIG_MMU=y
+-# CONFIG_NO_IOPORT is not set
+ CONFIG_GENERIC_HARDIRQS=y
+ CONFIG_STACKTRACE_SUPPORT=y
+ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+@@ -18,134 +16,183 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+ CONFIG_HARDIRQS_SW_RESEND=y
+ CONFIG_GENERIC_IRQ_PROBE=y
+ CONFIG_RWSEM_GENERIC_SPINLOCK=y
+-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_ARCH_HAS_CPUFREQ=y
+ CONFIG_GENERIC_HWEIGHT=y
+ CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_ARCH_SUPPORTS_AOUT=y
+-CONFIG_ZONE_DMA=y
+ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
++CONFIG_OPROFILE_ARMV7=y
+ CONFIG_VECTORS_BASE=0xffff0000
+ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++CONFIG_CONSTRUCTORS=y
+ 
+ #
+ # General setup
+ #
+ CONFIG_EXPERIMENTAL=y
+ CONFIG_BROKEN_ON_SMP=y
++CONFIG_LOCK_KERNEL=y
+ CONFIG_INIT_ENV_ARG_LIMIT=32
+ CONFIG_LOCALVERSION=""
+-CONFIG_LOCALVERSION_AUTO=y
++# CONFIG_LOCALVERSION_AUTO is not set
+ CONFIG_SWAP=y
+ CONFIG_SYSVIPC=y
+ CONFIG_SYSVIPC_SYSCTL=y
+ # CONFIG_POSIX_MQUEUE is not set
+ CONFIG_BSD_PROCESS_ACCT=y
+ # CONFIG_BSD_PROCESS_ACCT_V3 is not set
+-# CONFIG_TASKSTATS is not set
++CONFIG_TASKSTATS=y
++CONFIG_TASK_DELAY_ACCT=y
++CONFIG_TASK_XACCT=y
++CONFIG_TASK_IO_ACCOUNTING=y
+ # CONFIG_AUDIT is not set
+-# CONFIG_IKCONFIG is not set
+-CONFIG_LOG_BUF_SHIFT=14
+-# CONFIG_CGROUPS is not set
++
++#
++# RCU Subsystem
++#
++CONFIG_TREE_RCU=y
++# CONFIG_TREE_PREEMPT_RCU is not set
++# CONFIG_TINY_RCU is not set
++# CONFIG_RCU_TRACE is not set
++CONFIG_RCU_FANOUT=32
++# CONFIG_RCU_FANOUT_EXACT is not set
++# CONFIG_TREE_RCU_TRACE is not set
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=16
+ CONFIG_GROUP_SCHED=y
+ CONFIG_FAIR_GROUP_SCHED=y
+ # CONFIG_RT_GROUP_SCHED is not set
+ CONFIG_USER_SCHED=y
+ # CONFIG_CGROUP_SCHED is not set
+-# CONFIG_SYSFS_DEPRECATED=y is not set
+-# CONFIG_SYSFS_DEPRECATED_V2=y is not set
++# CONFIG_CGROUPS is not set
++# CONFIG_SYSFS_DEPRECATED_V2 is not set
+ # CONFIG_RELAY is not set
+ # CONFIG_NAMESPACES is not set
+ CONFIG_BLK_DEV_INITRD=y
+ CONFIG_INITRAMFS_SOURCE=""
++CONFIG_RD_GZIP=y
++# CONFIG_RD_BZIP2 is not set
++# CONFIG_RD_LZMA is not set
+ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+ CONFIG_SYSCTL=y
++CONFIG_ANON_INODES=y
+ CONFIG_EMBEDDED=y
+ CONFIG_UID16=y
+ # CONFIG_SYSCTL_SYSCALL is not set
+ CONFIG_KALLSYMS=y
+ # CONFIG_KALLSYMS_ALL is not set
+-CONFIG_KALLSYMS_EXTRA_PASS=y
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
+ CONFIG_HOTPLUG=y
+ CONFIG_PRINTK=y
+ CONFIG_BUG=y
+-CONFIG_ELF_CORE=y
+-CONFIG_COMPAT_BRK=y
++# CONFIG_ELF_CORE is not set
+ CONFIG_BASE_FULL=y
+ CONFIG_FUTEX=y
+-CONFIG_ANON_INODES=y
+ CONFIG_EPOLL=y
+ CONFIG_SIGNALFD=y
+ CONFIG_TIMERFD=y
+ CONFIG_EVENTFD=y
+ CONFIG_SHMEM=y
++CONFIG_AIO=y
++
++#
++# Kernel Performance Events And Counters
++#
+ CONFIG_VM_EVENT_COUNTERS=y
++# CONFIG_COMPAT_BRK is not set
+ CONFIG_SLAB=y
+ # CONFIG_SLUB is not set
+ # CONFIG_SLOB is not set
+-# CONFIG_PROFILING is not set
+-# CONFIG_MARKERS is not set
++CONFIG_PROFILING=y
++CONFIG_TRACEPOINTS=y
++CONFIG_OPROFILE=y
+ CONFIG_HAVE_OPROFILE=y
+ # CONFIG_KPROBES is not set
+-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+-# CONFIG_HAVE_IOREMAP_PROT is not set
+ CONFIG_HAVE_KPROBES=y
+ CONFIG_HAVE_KRETPROBES=y
+-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+-# CONFIG_HAVE_DMA_ATTRS is not set
+-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+ CONFIG_HAVE_CLK=y
+-CONFIG_PROC_PAGE_MONITOR=y
++
++#
++# GCOV-based kernel profiling
++#
++# CONFIG_GCOV_KERNEL is not set
++CONFIG_SLOW_WORK=y
++# CONFIG_SLOW_WORK_DEBUG is not set
+ CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+ CONFIG_SLABINFO=y
+ CONFIG_RT_MUTEXES=y
+-# CONFIG_TINY_SHMEM is not set
+ CONFIG_BASE_SMALL=0
+ CONFIG_MODULES=y
+-# CONFIG_MODULE_FORCE_LOAD is not set
++CONFIG_MODULE_FORCE_LOAD=y
+ CONFIG_MODULE_UNLOAD=y
+-# CONFIG_MODULE_FORCE_UNLOAD is not set
++CONFIG_MODULE_FORCE_UNLOAD=y
+ CONFIG_MODVERSIONS=y
+ CONFIG_MODULE_SRCVERSION_ALL=y
+-CONFIG_KMOD=y
+ CONFIG_BLOCK=y
+-# CONFIG_LBD is not set
+-# CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_LSF is not set
+-# CONFIG_BLK_DEV_BSG is not set
++CONFIG_LBDAF=y
++CONFIG_BLK_DEV_BSG=y
+ # CONFIG_BLK_DEV_INTEGRITY is not set
+ 
+ #
+ # IO Schedulers
+ #
+ CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+ CONFIG_IOSCHED_DEADLINE=y
+ CONFIG_IOSCHED_CFQ=y
+-CONFIG_DEFAULT_AS=y
+ # CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
++CONFIG_DEFAULT_CFQ=y
+ # CONFIG_DEFAULT_NOOP is not set
+-CONFIG_DEFAULT_IOSCHED="anticipatory"
+-CONFIG_CLASSIC_RCU=y
++CONFIG_DEFAULT_IOSCHED="cfq"
++# CONFIG_INLINE_SPIN_TRYLOCK is not set
++# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
++# CONFIG_INLINE_SPIN_LOCK is not set
++# CONFIG_INLINE_SPIN_LOCK_BH is not set
++# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
++# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
++# CONFIG_INLINE_SPIN_UNLOCK is not set
++# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
++# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
++# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
++# CONFIG_INLINE_READ_TRYLOCK is not set
++# CONFIG_INLINE_READ_LOCK is not set
++# CONFIG_INLINE_READ_LOCK_BH is not set
++# CONFIG_INLINE_READ_LOCK_IRQ is not set
++# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
++# CONFIG_INLINE_READ_UNLOCK is not set
++# CONFIG_INLINE_READ_UNLOCK_BH is not set
++# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
++# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
++# CONFIG_INLINE_WRITE_TRYLOCK is not set
++# CONFIG_INLINE_WRITE_LOCK is not set
++# CONFIG_INLINE_WRITE_LOCK_BH is not set
++# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
++# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
++# CONFIG_INLINE_WRITE_UNLOCK is not set
++# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
++# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
++# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
++# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+ CONFIG_FREEZER=y
+ 
+ #
+ # System Type
+ #
++CONFIG_MMU=y
+ # CONFIG_ARCH_AAEC2000 is not set
+ # CONFIG_ARCH_INTEGRATOR is not set
+ # CONFIG_ARCH_REALVIEW is not set
+ # CONFIG_ARCH_VERSATILE is not set
+ # CONFIG_ARCH_AT91 is not set
+-# CONFIG_ARCH_CLPS7500 is not set
+ # CONFIG_ARCH_CLPS711X is not set
++# CONFIG_ARCH_GEMINI is not set
+ # CONFIG_ARCH_EBSA110 is not set
+ # CONFIG_ARCH_EP93XX is not set
+ # CONFIG_ARCH_FOOTBRIDGE is not set
++# CONFIG_ARCH_MXC is not set
++# CONFIG_ARCH_STMP3XXX is not set
+ # CONFIG_ARCH_NETX is not set
+ # CONFIG_ARCH_H720X is not set
+-# CONFIG_ARCH_IMX is not set
++# CONFIG_ARCH_NOMADIK is not set
+ # CONFIG_ARCH_IOP13XX is not set
+ # CONFIG_ARCH_IOP32X is not set
+ # CONFIG_ARCH_IOP33X is not set
+@@ -153,23 +200,30 @@ CONFIG_FREEZER=y
+ # CONFIG_ARCH_IXP2000 is not set
+ # CONFIG_ARCH_IXP4XX is not set
+ # CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_DOVE is not set
+ # CONFIG_ARCH_KIRKWOOD is not set
+-# CONFIG_ARCH_KS8695 is not set
+-# CONFIG_ARCH_NS9XXX is not set
+ # CONFIG_ARCH_LOKI is not set
+ # CONFIG_ARCH_MV78XX0 is not set
+-# CONFIG_ARCH_MXC is not set
+ # CONFIG_ARCH_ORION5X is not set
++# CONFIG_ARCH_MMP is not set
++# CONFIG_ARCH_KS8695 is not set
++# CONFIG_ARCH_NS9XXX is not set
++# CONFIG_ARCH_W90X900 is not set
+ # CONFIG_ARCH_PNX4008 is not set
+ # CONFIG_ARCH_PXA is not set
++# CONFIG_ARCH_MSM is not set
+ # CONFIG_ARCH_RPC is not set
+ # CONFIG_ARCH_SA1100 is not set
+ # CONFIG_ARCH_S3C2410 is not set
++# CONFIG_ARCH_S3C64XX is not set
++# CONFIG_ARCH_S5PC1XX is not set
+ # CONFIG_ARCH_SHARK is not set
+ # CONFIG_ARCH_LH7A40X is not set
++# CONFIG_ARCH_U300 is not set
+ # CONFIG_ARCH_DAVINCI is not set
+ CONFIG_ARCH_OMAP=y
+-# CONFIG_ARCH_MSM7X00A is not set
++# CONFIG_ARCH_BCMRING is not set
++# CONFIG_ARCH_U8500 is not set
+ 
+ #
+ # TI OMAP Implementations
+@@ -178,37 +232,55 @@ CONFIG_ARCH_OMAP_OTG=y
+ # CONFIG_ARCH_OMAP1 is not set
+ # CONFIG_ARCH_OMAP2 is not set
+ CONFIG_ARCH_OMAP3=y
++# CONFIG_ARCH_OMAP4 is not set
+ 
+ #
+ # OMAP Feature Selections
+ #
+-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+-# CONFIG_OMAP_RESET_CLOCKS is not set
++CONFIG_OMAP_SMARTREFLEX=y
++# CONFIG_OMAP_SMARTREFLEX_TESTING is not set
++CONFIG_OMAP_RESET_CLOCKS=y
+ # CONFIG_OMAP_MUX is not set
+-# CONFIG_OMAP_MCBSP is not set
++CONFIG_OMAP_MCBSP=y
++CONFIG_OMAP_MBOX_FWK=m
++CONFIG_OMAP_IOMMU=y
+ # CONFIG_OMAP_MPU_TIMER is not set
+ CONFIG_OMAP_32K_TIMER=y
++# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
++# CONFIG_OMAP3_DEBOBS is not set
+ CONFIG_OMAP_32K_TIMER_HZ=128
+ CONFIG_OMAP_DM_TIMER=y
+ # CONFIG_OMAP_LL_DEBUG_UART1 is not set
+ # CONFIG_OMAP_LL_DEBUG_UART2 is not set
+ CONFIG_OMAP_LL_DEBUG_UART3=y
++# CONFIG_OMAP_LL_DEBUG_NONE is not set
++# CONFIG_OMAP_PM_NONE is not set
++# CONFIG_OMAP_PM_NOOP is not set
++CONFIG_OMAP_PM_SRF=y
+ CONFIG_ARCH_OMAP34XX=y
+ CONFIG_ARCH_OMAP3430=y
++CONFIG_OMAP_PACKAGE_CBB=y
+ 
+ #
+ # OMAP Board Type
+ #
+ CONFIG_MACH_OMAP3_BEAGLE=y
+-
+-#
+-# Boot options
+-#
+-
+-#
+-# Power management
+-#
++# CONFIG_MACH_OMAP_LDP is not set
++# CONFIG_MACH_OVERO is not set
++CONFIG_MACH_OMAP3EVM=y
++CONFIG_PMIC_TWL4030=y
++# CONFIG_MACH_OMAP3517EVM is not set
++# CONFIG_MACH_OMAP3_PANDORA is not set
++# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
++# CONFIG_MACH_OMAP_3430SDP is not set
++# CONFIG_MACH_NOKIA_RX51 is not set
++# CONFIG_MACH_OMAP_ZOOM2 is not set
++# CONFIG_MACH_OMAP_ZOOM3 is not set
++# CONFIG_MACH_CM_T35 is not set
++# CONFIG_MACH_IGEP0020 is not set
++# CONFIG_MACH_OMAP_3630SDP is not set
++# CONFIG_OMAP3_EMU is not set
++# CONFIG_OMAP3_SDRC_AC_TIMING is not set
+ 
+ #
+ # Processor Type
+@@ -218,7 +290,7 @@ CONFIG_CPU_32v6K=y
+ CONFIG_CPU_V7=y
+ CONFIG_CPU_32v7=y
+ CONFIG_CPU_ABRT_EV7=y
+-CONFIG_CPU_PABRT_IFAR=y
++CONFIG_CPU_PABRT_V7=y
+ CONFIG_CPU_CACHE_V7=y
+ CONFIG_CPU_CACHE_VIPT=y
+ CONFIG_CPU_COPY_V6=y
+@@ -231,12 +303,17 @@ CONFIG_CPU_CP15_MMU=y
+ # Processor Features
+ #
+ CONFIG_ARM_THUMB=y
+-# CONFIG_ARM_THUMBEE is not set
++CONFIG_ARM_THUMBEE=y
+ # CONFIG_CPU_ICACHE_DISABLE is not set
+ # CONFIG_CPU_DCACHE_DISABLE is not set
+ # CONFIG_CPU_BPREDICT_DISABLE is not set
+ CONFIG_HAS_TLS_REG=y
+-# CONFIG_OUTER_CACHE is not set
++CONFIG_ARM_L1_CACHE_SHIFT=6
++CONFIG_USER_L2_PLE=y
++CONFIG_USER_PMON=y
++# CONFIG_ARM_ERRATA_430973 is not set
++# CONFIG_ARM_ERRATA_458693 is not set
++# CONFIG_ARM_ERRATA_460075 is not set
+ CONFIG_COMMON_CLKDEV=y
+ 
+ #
+@@ -257,42 +334,63 @@ CONFIG_VMSPLIT_3G=y
+ # CONFIG_VMSPLIT_2G is not set
+ # CONFIG_VMSPLIT_1G is not set
+ CONFIG_PAGE_OFFSET=0xC0000000
+-# CONFIG_PREEMPT is not set
++# CONFIG_PREEMPT_NONE is not set
++# CONFIG_PREEMPT_VOLUNTARY is not set
++CONFIG_PREEMPT=y
+ CONFIG_HZ=128
++# CONFIG_THUMB2_KERNEL is not set
+ CONFIG_AEABI=y
+-CONFIG_OABI_COMPAT=y
+-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++# CONFIG_OABI_COMPAT is not set
++CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
++# CONFIG_HIGHMEM is not set
+ CONFIG_SELECT_MEMORY_MODEL=y
+ CONFIG_FLATMEM_MANUAL=y
+ # CONFIG_DISCONTIGMEM_MANUAL is not set
+ # CONFIG_SPARSEMEM_MANUAL is not set
+ CONFIG_FLATMEM=y
+ CONFIG_FLAT_NODE_MEM_MAP=y
+-# CONFIG_SPARSEMEM_STATIC is not set
+-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+ CONFIG_PAGEFLAGS_EXTENDED=y
+ CONFIG_SPLIT_PTLOCK_CPUS=4
+-# CONFIG_RESOURCES_64BIT is not set
+-CONFIG_ZONE_DMA_FLAG=1
+-CONFIG_BOUNCE=y
++# CONFIG_PHYS_ADDR_T_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
+ CONFIG_VIRT_TO_BUS=y
+-# CONFIG_LEDS is not set
++# CONFIG_KSM is not set
++CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
++CONFIG_LEDS=y
+ CONFIG_ALIGNMENT_TRAP=y
++# CONFIG_UACCESS_WITH_MEMCPY is not set
++CONFIG_CPU_V7_SYSFS=y
+ 
+ #
+ # Boot options
+ #
+ CONFIG_ZBOOT_ROM_TEXT=0x0
+ CONFIG_ZBOOT_ROM_BSS=0x0
+-CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
++CONFIG_CMDLINE=" debug "
+ # CONFIG_XIP_KERNEL is not set
+-# CONFIG_KEXEC is not set
++CONFIG_KEXEC=y
++CONFIG_ATAGS_PROC=y
+ 
+ #
+ # CPU Power Management
+ #
+-# CONFIG_CPU_FREQ is not set
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_TABLE=y
++CONFIG_CPU_FREQ_DEBUG=y
++CONFIG_CPU_FREQ_STAT=y
++CONFIG_CPU_FREQ_STAT_DETAILS=y
++CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++CONFIG_CPU_FREQ_GOV_POWERSAVE=y
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+ # CONFIG_CPU_IDLE is not set
+ 
+ #
+@@ -302,29 +400,30 @@ CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.16
+ #
+ # At least one emulation must be selected
+ #
+-CONFIG_FPE_NWFPE=y
+-# CONFIG_FPE_NWFPE_XP is not set
+-# CONFIG_FPE_FASTFPE is not set
+ CONFIG_VFP=y
+ CONFIG_VFPv3=y
+-# CONFIG_NEON is not set
++CONFIG_NEON=y
+ 
+ #
+ # Userspace binary formats
+ #
+ CONFIG_BINFMT_ELF=y
+-# CONFIG_BINFMT_AOUT is not set
++CONFIG_HAVE_AOUT=y
++CONFIG_BINFMT_AOUT=m
+ CONFIG_BINFMT_MISC=y
+ 
+ #
+ # Power management options
+ #
+ CONFIG_PM=y
+-# CONFIG_PM_DEBUG is not set
++CONFIG_PM_DEBUG=y
++# CONFIG_PM_VERBOSE is not set
++CONFIG_CAN_PM_TRACE=y
+ CONFIG_PM_SLEEP=y
+ CONFIG_SUSPEND=y
+ CONFIG_SUSPEND_FREEZER=y
+ # CONFIG_APM_EMULATION is not set
++CONFIG_PM_RUNTIME=y
+ CONFIG_ARCH_SUSPEND_POSSIBLE=y
+ CONFIG_NET=y
+ 
+@@ -332,13 +431,14 @@ CONFIG_NET=y
+ # Networking options
+ #
+ CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
++CONFIG_PACKET_MMAP=y
+ CONFIG_UNIX=y
+ CONFIG_XFRM=y
+ # CONFIG_XFRM_USER is not set
+ # CONFIG_XFRM_SUB_POLICY is not set
+ # CONFIG_XFRM_MIGRATE is not set
+ # CONFIG_XFRM_STATISTICS is not set
++CONFIG_XFRM_IPCOMP=m
+ CONFIG_NET_KEY=y
+ # CONFIG_NET_KEY_MIGRATE is not set
+ CONFIG_INET=y
+@@ -349,63 +449,462 @@ CONFIG_IP_PNP=y
+ CONFIG_IP_PNP_DHCP=y
+ CONFIG_IP_PNP_BOOTP=y
+ CONFIG_IP_PNP_RARP=y
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
++CONFIG_NET_IPIP=m
++CONFIG_NET_IPGRE=m
+ # CONFIG_ARPD is not set
+ # CONFIG_SYN_COOKIES is not set
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
++CONFIG_INET_AH=m
++CONFIG_INET_ESP=m
++CONFIG_INET_IPCOMP=m
++CONFIG_INET_XFRM_TUNNEL=m
++CONFIG_INET_TUNNEL=m
+ CONFIG_INET_XFRM_MODE_TRANSPORT=y
+ CONFIG_INET_XFRM_MODE_TUNNEL=y
+ CONFIG_INET_XFRM_MODE_BEET=y
+-# CONFIG_INET_LRO is not set
+-CONFIG_INET_DIAG=y
+-CONFIG_INET_TCP_DIAG=y
+-# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_INET_LRO=y
++CONFIG_INET_DIAG=m
++CONFIG_INET_TCP_DIAG=m
++CONFIG_TCP_CONG_ADVANCED=y
++CONFIG_TCP_CONG_BIC=m
+ CONFIG_TCP_CONG_CUBIC=y
++CONFIG_TCP_CONG_WESTWOOD=m
++CONFIG_TCP_CONG_HTCP=m
++CONFIG_TCP_CONG_HSTCP=m
++CONFIG_TCP_CONG_HYBLA=m
++CONFIG_TCP_CONG_VEGAS=m
++CONFIG_TCP_CONG_SCALABLE=m
++CONFIG_TCP_CONG_LP=m
++CONFIG_TCP_CONG_VENO=m
++CONFIG_TCP_CONG_YEAH=m
++CONFIG_TCP_CONG_ILLINOIS=m
++# CONFIG_DEFAULT_BIC is not set
++CONFIG_DEFAULT_CUBIC=y
++# CONFIG_DEFAULT_HTCP is not set
++# CONFIG_DEFAULT_VEGAS is not set
++# CONFIG_DEFAULT_WESTWOOD is not set
++# CONFIG_DEFAULT_RENO is not set
+ CONFIG_DEFAULT_TCP_CONG="cubic"
+ # CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
++CONFIG_IPV6=m
++# CONFIG_IPV6_PRIVACY is not set
++# CONFIG_IPV6_ROUTER_PREF is not set
++# CONFIG_IPV6_OPTIMISTIC_DAD is not set
++CONFIG_INET6_AH=m
++CONFIG_INET6_ESP=m
++CONFIG_INET6_IPCOMP=m
++CONFIG_IPV6_MIP6=m
++CONFIG_INET6_XFRM_TUNNEL=m
++CONFIG_INET6_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_TRANSPORT=m
++CONFIG_INET6_XFRM_MODE_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_BEET=m
++CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
++CONFIG_IPV6_SIT=m
++# CONFIG_IPV6_SIT_6RD is not set
++CONFIG_IPV6_NDISC_NODETYPE=y
++CONFIG_IPV6_TUNNEL=m
++CONFIG_IPV6_MULTIPLE_TABLES=y
++CONFIG_IPV6_SUBTREES=y
++CONFIG_IPV6_MROUTE=y
++# CONFIG_IPV6_PIMSM_V2 is not set
+ # CONFIG_NETWORK_SECMARK is not set
+-# CONFIG_NETFILTER is not set
+-# CONFIG_IP_DCCP is not set
+-# CONFIG_IP_SCTP is not set
+-# CONFIG_TIPC is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
++CONFIG_NETFILTER=y
++# CONFIG_NETFILTER_DEBUG is not set
++CONFIG_NETFILTER_ADVANCED=y
++CONFIG_BRIDGE_NETFILTER=y
++
++#
++# Core Netfilter Configuration
++#
++CONFIG_NETFILTER_NETLINK=m
++CONFIG_NETFILTER_NETLINK_QUEUE=m
++CONFIG_NETFILTER_NETLINK_LOG=m
++CONFIG_NF_CONNTRACK=m
++CONFIG_NF_CT_ACCT=y
++CONFIG_NF_CONNTRACK_MARK=y
++CONFIG_NF_CONNTRACK_EVENTS=y
++CONFIG_NF_CT_PROTO_DCCP=m
++CONFIG_NF_CT_PROTO_GRE=m
++CONFIG_NF_CT_PROTO_SCTP=m
++CONFIG_NF_CT_PROTO_UDPLITE=m
++CONFIG_NF_CONNTRACK_AMANDA=m
++CONFIG_NF_CONNTRACK_FTP=m
++CONFIG_NF_CONNTRACK_H323=m
++CONFIG_NF_CONNTRACK_IRC=m
++CONFIG_NF_CONNTRACK_NETBIOS_NS=m
++CONFIG_NF_CONNTRACK_PPTP=m
++CONFIG_NF_CONNTRACK_SANE=m
++CONFIG_NF_CONNTRACK_SIP=m
++CONFIG_NF_CONNTRACK_TFTP=m
++CONFIG_NF_CT_NETLINK=m
++# CONFIG_NETFILTER_TPROXY is not set
++CONFIG_NETFILTER_XTABLES=m
++CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
++CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
++# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
++CONFIG_NETFILTER_XT_TARGET_HL=m
++# CONFIG_NETFILTER_XT_TARGET_LED is not set
++CONFIG_NETFILTER_XT_TARGET_MARK=m
++CONFIG_NETFILTER_XT_TARGET_NFLOG=m
++CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
++# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
++CONFIG_NETFILTER_XT_TARGET_RATEEST=m
++# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
++CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
++# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
++# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
++CONFIG_NETFILTER_XT_MATCH_COMMENT=m
++CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
++CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
++CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
++CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
++CONFIG_NETFILTER_XT_MATCH_DCCP=m
++CONFIG_NETFILTER_XT_MATCH_DSCP=m
++CONFIG_NETFILTER_XT_MATCH_ESP=m
++CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
++CONFIG_NETFILTER_XT_MATCH_HELPER=m
++CONFIG_NETFILTER_XT_MATCH_HL=m
++CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
++CONFIG_NETFILTER_XT_MATCH_LENGTH=m
++CONFIG_NETFILTER_XT_MATCH_LIMIT=m
++CONFIG_NETFILTER_XT_MATCH_MAC=m
++CONFIG_NETFILTER_XT_MATCH_MARK=m
++CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
++CONFIG_NETFILTER_XT_MATCH_OWNER=m
++CONFIG_NETFILTER_XT_MATCH_POLICY=m
++# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
++CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
++CONFIG_NETFILTER_XT_MATCH_QUOTA=m
++CONFIG_NETFILTER_XT_MATCH_RATEEST=m
++CONFIG_NETFILTER_XT_MATCH_REALM=m
++CONFIG_NETFILTER_XT_MATCH_RECENT=m
++# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
++CONFIG_NETFILTER_XT_MATCH_SCTP=m
++CONFIG_NETFILTER_XT_MATCH_STATE=m
++CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
++CONFIG_NETFILTER_XT_MATCH_STRING=m
++CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
++CONFIG_NETFILTER_XT_MATCH_TIME=m
++CONFIG_NETFILTER_XT_MATCH_U32=m
++# CONFIG_NETFILTER_XT_MATCH_OSF is not set
++CONFIG_IP_VS=m
++CONFIG_IP_VS_IPV6=y
++CONFIG_IP_VS_DEBUG=y
++CONFIG_IP_VS_TAB_BITS=12
++
++#
++# IPVS transport protocol load balancing support
++#
++CONFIG_IP_VS_PROTO_TCP=y
++CONFIG_IP_VS_PROTO_UDP=y
++CONFIG_IP_VS_PROTO_AH_ESP=y
++CONFIG_IP_VS_PROTO_ESP=y
++CONFIG_IP_VS_PROTO_AH=y
++
++#
++# IPVS scheduler
++#
++CONFIG_IP_VS_RR=m
++CONFIG_IP_VS_WRR=m
++CONFIG_IP_VS_LC=m
++CONFIG_IP_VS_WLC=m
++CONFIG_IP_VS_LBLC=m
++CONFIG_IP_VS_LBLCR=m
++CONFIG_IP_VS_DH=m
++CONFIG_IP_VS_SH=m
++CONFIG_IP_VS_SED=m
++CONFIG_IP_VS_NQ=m
++
++#
++# IPVS application helper
++#
++CONFIG_IP_VS_FTP=m
++
++#
++# IP: Netfilter Configuration
++#
++CONFIG_NF_DEFRAG_IPV4=m
++CONFIG_NF_CONNTRACK_IPV4=m
++CONFIG_NF_CONNTRACK_PROC_COMPAT=y
++CONFIG_IP_NF_QUEUE=m
++CONFIG_IP_NF_IPTABLES=m
++CONFIG_IP_NF_MATCH_ADDRTYPE=m
++CONFIG_IP_NF_MATCH_AH=m
++CONFIG_IP_NF_MATCH_ECN=m
++CONFIG_IP_NF_MATCH_TTL=m
++CONFIG_IP_NF_FILTER=m
++CONFIG_IP_NF_TARGET_REJECT=m
++CONFIG_IP_NF_TARGET_LOG=m
++CONFIG_IP_NF_TARGET_ULOG=m
++CONFIG_NF_NAT=m
++CONFIG_NF_NAT_NEEDED=y
++CONFIG_IP_NF_TARGET_MASQUERADE=m
++CONFIG_IP_NF_TARGET_NETMAP=m
++CONFIG_IP_NF_TARGET_REDIRECT=m
++CONFIG_NF_NAT_SNMP_BASIC=m
++CONFIG_NF_NAT_PROTO_DCCP=m
++CONFIG_NF_NAT_PROTO_GRE=m
++CONFIG_NF_NAT_PROTO_UDPLITE=m
++CONFIG_NF_NAT_PROTO_SCTP=m
++CONFIG_NF_NAT_FTP=m
++CONFIG_NF_NAT_IRC=m
++CONFIG_NF_NAT_TFTP=m
++CONFIG_NF_NAT_AMANDA=m
++CONFIG_NF_NAT_PPTP=m
++CONFIG_NF_NAT_H323=m
++CONFIG_NF_NAT_SIP=m
++CONFIG_IP_NF_MANGLE=m
++CONFIG_IP_NF_TARGET_CLUSTERIP=m
++CONFIG_IP_NF_TARGET_ECN=m
++CONFIG_IP_NF_TARGET_TTL=m
++CONFIG_IP_NF_RAW=m
++CONFIG_IP_NF_ARPTABLES=m
++CONFIG_IP_NF_ARPFILTER=m
++CONFIG_IP_NF_ARP_MANGLE=m
++
++#
++# IPv6: Netfilter Configuration
++#
++CONFIG_NF_CONNTRACK_IPV6=m
++CONFIG_IP6_NF_QUEUE=m
++CONFIG_IP6_NF_IPTABLES=m
++CONFIG_IP6_NF_MATCH_AH=m
++CONFIG_IP6_NF_MATCH_EUI64=m
++CONFIG_IP6_NF_MATCH_FRAG=m
++CONFIG_IP6_NF_MATCH_OPTS=m
++CONFIG_IP6_NF_MATCH_HL=m
++CONFIG_IP6_NF_MATCH_IPV6HEADER=m
++CONFIG_IP6_NF_MATCH_MH=m
++CONFIG_IP6_NF_MATCH_RT=m
++CONFIG_IP6_NF_TARGET_HL=m
++CONFIG_IP6_NF_TARGET_LOG=m
++CONFIG_IP6_NF_FILTER=m
++CONFIG_IP6_NF_TARGET_REJECT=m
++CONFIG_IP6_NF_MANGLE=m
++CONFIG_IP6_NF_RAW=m
++# CONFIG_BRIDGE_NF_EBTABLES is not set
++CONFIG_IP_DCCP=m
++CONFIG_INET_DCCP_DIAG=m
++
++#
++# DCCP CCIDs Configuration (EXPERIMENTAL)
++#
++# CONFIG_IP_DCCP_CCID2_DEBUG is not set
++CONFIG_IP_DCCP_CCID3=y
++# CONFIG_IP_DCCP_CCID3_DEBUG is not set
++CONFIG_IP_DCCP_CCID3_RTO=100
++CONFIG_IP_DCCP_TFRC_LIB=y
++
++#
++# DCCP Kernel Hacking
++#
++# CONFIG_IP_DCCP_DEBUG is not set
++CONFIG_IP_SCTP=m
++# CONFIG_SCTP_DBG_MSG is not set
++# CONFIG_SCTP_DBG_OBJCNT is not set
++# CONFIG_SCTP_HMAC_NONE is not set
++# CONFIG_SCTP_HMAC_SHA1 is not set
++CONFIG_SCTP_HMAC_MD5=y
++# CONFIG_RDS is not set
++CONFIG_TIPC=m
++# CONFIG_TIPC_ADVANCED is not set
++# CONFIG_TIPC_DEBUG is not set
++CONFIG_ATM=m
++CONFIG_ATM_CLIP=m
++# CONFIG_ATM_CLIP_NO_ICMP is not set
++CONFIG_ATM_LANE=m
++CONFIG_ATM_MPOA=m
++CONFIG_ATM_BR2684=m
++# CONFIG_ATM_BR2684_IPFILTER is not set
++CONFIG_STP=m
++CONFIG_GARP=m
++CONFIG_BRIDGE=m
++# CONFIG_NET_DSA is not set
++CONFIG_VLAN_8021Q=m
++CONFIG_VLAN_8021Q_GVRP=y
+ # CONFIG_DECNET is not set
++CONFIG_LLC=m
+ # CONFIG_LLC2 is not set
+ # CONFIG_IPX is not set
+ # CONFIG_ATALK is not set
+ # CONFIG_X25 is not set
+ # CONFIG_LAPB is not set
+ # CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-# CONFIG_NET_SCHED is not set
++CONFIG_WAN_ROUTER=m
++# CONFIG_PHONET is not set
++# CONFIG_IEEE802154 is not set
++CONFIG_NET_SCHED=y
++
++#
++# Queueing/Scheduling
++#
++CONFIG_NET_SCH_CBQ=m
++CONFIG_NET_SCH_HTB=m
++CONFIG_NET_SCH_HFSC=m
++CONFIG_NET_SCH_ATM=m
++CONFIG_NET_SCH_PRIO=m
++CONFIG_NET_SCH_MULTIQ=m
++CONFIG_NET_SCH_RED=m
++CONFIG_NET_SCH_SFQ=m
++CONFIG_NET_SCH_TEQL=m
++CONFIG_NET_SCH_TBF=m
++CONFIG_NET_SCH_GRED=m
++CONFIG_NET_SCH_DSMARK=m
++CONFIG_NET_SCH_NETEM=m
++CONFIG_NET_SCH_DRR=m
++
++#
++# Classification
++#
++CONFIG_NET_CLS=y
++CONFIG_NET_CLS_BASIC=m
++CONFIG_NET_CLS_TCINDEX=m
++CONFIG_NET_CLS_ROUTE4=m
++CONFIG_NET_CLS_ROUTE=y
++CONFIG_NET_CLS_FW=m
++CONFIG_NET_CLS_U32=m
++CONFIG_CLS_U32_PERF=y
++CONFIG_CLS_U32_MARK=y
++CONFIG_NET_CLS_RSVP=m
++CONFIG_NET_CLS_RSVP6=m
++CONFIG_NET_CLS_FLOW=m
++# CONFIG_NET_EMATCH is not set
++# CONFIG_NET_CLS_ACT is not set
++CONFIG_NET_CLS_IND=y
++CONFIG_NET_SCH_FIFO=y
++# CONFIG_DCB is not set
+ 
+ #
+ # Network testing
+ #
+ # CONFIG_NET_PKTGEN is not set
++# CONFIG_NET_DROP_MONITOR is not set
+ # CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+-# CONFIG_AF_RXRPC is not set
+-
+-#
+-# Wireless
+-#
+-# CONFIG_CFG80211 is not set
+-# CONFIG_WIRELESS_EXT is not set
+-# CONFIG_MAC80211 is not set
+-# CONFIG_IEEE80211 is not set
+-# CONFIG_RFKILL is not set
+-# CONFIG_NET_9P is not set
++CONFIG_CAN=m
++CONFIG_CAN_RAW=m
++CONFIG_CAN_BCM=m
++
++#
++# CAN Device Drivers
++#
++CONFIG_CAN_VCAN=m
++# CONFIG_CAN_DEV is not set
++# CONFIG_CAN_DEBUG_DEVICES is not set
++CONFIG_IRDA=m
++
++#
++# IrDA protocols
++#
++CONFIG_IRLAN=m
++CONFIG_IRNET=m
++CONFIG_IRCOMM=m
++CONFIG_IRDA_ULTRA=y
++
++#
++# IrDA options
++#
++CONFIG_IRDA_CACHE_LAST_LSAP=y
++CONFIG_IRDA_FAST_RR=y
++CONFIG_IRDA_DEBUG=y
++
++#
++# Infrared-port device drivers
++#
++
++#
++# SIR device drivers
++#
++CONFIG_IRTTY_SIR=m
++
++#
++# Dongle support
++#
++CONFIG_DONGLE=y
++CONFIG_ESI_DONGLE=m
++CONFIG_ACTISYS_DONGLE=m
++CONFIG_TEKRAM_DONGLE=m
++CONFIG_TOIM3232_DONGLE=m
++CONFIG_LITELINK_DONGLE=m
++CONFIG_MA600_DONGLE=m
++CONFIG_GIRBIL_DONGLE=m
++CONFIG_MCP2120_DONGLE=m
++CONFIG_OLD_BELKIN_DONGLE=m
++# CONFIG_ACT200L_DONGLE is not set
++CONFIG_KINGSUN_DONGLE=m
++CONFIG_KSDAZZLE_DONGLE=m
++CONFIG_KS959_DONGLE=m
++
++#
++# FIR device drivers
++#
++CONFIG_USB_IRDA=m
++CONFIG_SIGMATEL_FIR=m
++CONFIG_MCS_FIR=m
++CONFIG_BT=m
++CONFIG_BT_L2CAP=m
++CONFIG_BT_SCO=m
++CONFIG_BT_RFCOMM=m
++CONFIG_BT_RFCOMM_TTY=y
++CONFIG_BT_BNEP=m
++CONFIG_BT_BNEP_MC_FILTER=y
++CONFIG_BT_BNEP_PROTO_FILTER=y
++CONFIG_BT_HIDP=m
++
++#
++# Bluetooth device drivers
++#
++CONFIG_BT_HCIBTUSB=m
++CONFIG_BT_HCIBTSDIO=m
++CONFIG_BT_HCIUART=m
++CONFIG_BT_HCIUART_H4=y
++CONFIG_BT_HCIUART_BCSP=y
++CONFIG_BT_HCIUART_LL=y
++CONFIG_BT_HCIBCM203X=m
++CONFIG_BT_HCIBPA10X=m
++CONFIG_BT_HCIBFUSB=m
++# CONFIG_BT_HCIVHCI is not set
++# CONFIG_BT_MRVL is not set
++CONFIG_AF_RXRPC=m
++# CONFIG_AF_RXRPC_DEBUG is not set
++# CONFIG_RXKAD is not set
++CONFIG_FIB_RULES=y
++CONFIG_WIRELESS=y
++CONFIG_WIRELESS_EXT=y
++CONFIG_WEXT_CORE=y
++CONFIG_WEXT_PROC=y
++CONFIG_WEXT_SPY=y
++CONFIG_WEXT_PRIV=y
++CONFIG_CFG80211=m
++# CONFIG_NL80211_TESTMODE is not set
++# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
++# CONFIG_CFG80211_REG_DEBUG is not set
++CONFIG_CFG80211_DEFAULT_PS=y
++# CONFIG_CFG80211_DEBUGFS is not set
++CONFIG_WIRELESS_OLD_REGULATORY=y
++CONFIG_CFG80211_WEXT=y
++CONFIG_WIRELESS_EXT_SYSFS=y
++CONFIG_LIB80211=y
++CONFIG_LIB80211_CRYPT_WEP=m
++CONFIG_LIB80211_CRYPT_CCMP=m
++CONFIG_LIB80211_CRYPT_TKIP=m
++# CONFIG_LIB80211_DEBUG is not set
++CONFIG_MAC80211=m
++CONFIG_MAC80211_RC_PID=y
++# CONFIG_MAC80211_RC_MINSTREL is not set
++CONFIG_MAC80211_RC_DEFAULT_PID=y
++# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
++CONFIG_MAC80211_RC_DEFAULT="pid"
++# CONFIG_MAC80211_MESH is not set
++CONFIG_MAC80211_LEDS=y
++# CONFIG_MAC80211_DEBUGFS is not set
++# CONFIG_MAC80211_DEBUG_MENU is not set
++CONFIG_WIMAX=m
++CONFIG_WIMAX_DEBUG_LEVEL=8
++CONFIG_RFKILL=m
++CONFIG_RFKILL_LEDS=y
++CONFIG_RFKILL_INPUT=y
++CONFIG_NET_9P=m
++# CONFIG_NET_9P_DEBUG is not set
+ 
+ #
+ # Device Drivers
+@@ -414,17 +913,22 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
+ #
+ # Generic Driver Options
+ #
+-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_UEVENT_HELPER_PATH=""
++CONFIG_DEVTMPFS=y
++CONFIG_DEVTMPFS_MOUNT=y
+ CONFIG_STANDALONE=y
+ CONFIG_PREVENT_FIRMWARE_BUILD=y
+-# CONFIG_FW_LOADER is not set
++CONFIG_FW_LOADER=y
++CONFIG_FIRMWARE_IN_KERNEL=y
++CONFIG_EXTRA_FIRMWARE=""
+ # CONFIG_DEBUG_DRIVER is not set
+ # CONFIG_DEBUG_DEVRES is not set
+ # CONFIG_SYS_HYPERVISOR is not set
+ # CONFIG_CONNECTOR is not set
+ CONFIG_MTD=y
+ # CONFIG_MTD_DEBUG is not set
+-# CONFIG_MTD_CONCAT is not set
++# CONFIG_MTD_TESTS is not set
++CONFIG_MTD_CONCAT=y
+ CONFIG_MTD_PARTITIONS=y
+ # CONFIG_MTD_REDBOOT_PARTS is not set
+ # CONFIG_MTD_CMDLINE_PARTS is not set
+@@ -472,6 +976,9 @@ CONFIG_MTD_CFI_I2=y
+ #
+ # Self-contained MTD device drivers
+ #
++# CONFIG_MTD_DATAFLASH is not set
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SST25L is not set
+ # CONFIG_MTD_SLRAM is not set
+ # CONFIG_MTD_PHRAM is not set
+ # CONFIG_MTD_MTDRAM is not set
+@@ -487,38 +994,82 @@ CONFIG_MTD_NAND=y
+ # CONFIG_MTD_NAND_VERIFY_WRITE is not set
+ # CONFIG_MTD_NAND_ECC_SMC is not set
+ # CONFIG_MTD_NAND_MUSEUM_IDS is not set
++# CONFIG_MTD_NAND_GPIO is not set
++CONFIG_MTD_NAND_OMAP2=y
++CONFIG_MTD_NAND_OMAP_PREFETCH=y
++# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
+ CONFIG_MTD_NAND_IDS=y
+ # CONFIG_MTD_NAND_DISKONCHIP is not set
+ # CONFIG_MTD_NAND_NANDSIM is not set
+-# CONFIG_MTD_NAND_PLATFORM is not set
++CONFIG_MTD_NAND_PLATFORM=y
+ # CONFIG_MTD_ALAUDA is not set
+ # CONFIG_MTD_ONENAND is not set
+ 
+ #
++# LPDDR flash memory drivers
++#
++# CONFIG_MTD_LPDDR is not set
++
++#
+ # UBI - Unsorted block images
+ #
+-# CONFIG_MTD_UBI is not set
++CONFIG_MTD_UBI=y
++CONFIG_MTD_UBI_WL_THRESHOLD=4096
++CONFIG_MTD_UBI_BEB_RESERVE=1
++# CONFIG_MTD_UBI_GLUEBI is not set
++
++#
++# UBI debugging options
++#
++# CONFIG_MTD_UBI_DEBUG is not set
+ # CONFIG_PARPORT is not set
+ CONFIG_BLK_DEV=y
+ # CONFIG_BLK_DEV_COW_COMMON is not set
+ CONFIG_BLK_DEV_LOOP=y
+-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++CONFIG_BLK_DEV_CRYPTOLOOP=m
++
++#
++# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
++#
+ # CONFIG_BLK_DEV_NBD is not set
+ # CONFIG_BLK_DEV_UB is not set
+ CONFIG_BLK_DEV_RAM=y
+ CONFIG_BLK_DEV_RAM_COUNT=16
+ CONFIG_BLK_DEV_RAM_SIZE=16384
+ # CONFIG_BLK_DEV_XIP is not set
+-# CONFIG_CDROM_PKTCDVD is not set
++CONFIG_CDROM_PKTCDVD=m
++CONFIG_CDROM_PKTCDVD_BUFFERS=8
++# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+ # CONFIG_ATA_OVER_ETH is not set
+-# CONFIG_MISC_DEVICES is not set
++# CONFIG_MG_DISK is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_AD525X_DPOT is not set
++# CONFIG_ICS932S401 is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
++# CONFIG_ISL29003 is not set
++# CONFIG_DS1682 is not set
++# CONFIG_TI_DAC7512 is not set
++# CONFIG_C2PORT is not set
++
++#
++# EEPROM support
++#
++# CONFIG_EEPROM_AT24 is not set
++# CONFIG_EEPROM_AT25 is not set
++# CONFIG_EEPROM_LEGACY is not set
++# CONFIG_EEPROM_MAX6875 is not set
++CONFIG_EEPROM_93CX6=y
++CONFIG_IWMC3200TOP=m
++# CONFIG_IWMC3200TOP_DEBUG is not set
++# CONFIG_IWMC3200TOP_DEBUGFS is not set
+ CONFIG_HAVE_IDE=y
+ # CONFIG_IDE is not set
+ 
+ #
+ # SCSI device support
+ #
+-# CONFIG_RAID_ATTRS is not set
++CONFIG_RAID_ATTRS=m
+ CONFIG_SCSI=y
+ CONFIG_SCSI_DMA=y
+ # CONFIG_SCSI_TGT is not set
+@@ -531,14 +1082,11 @@ CONFIG_SCSI_PROC_FS=y
+ CONFIG_BLK_DEV_SD=y
+ # CONFIG_CHR_DEV_ST is not set
+ # CONFIG_CHR_DEV_OSST is not set
+-# CONFIG_BLK_DEV_SR is not set
+-# CONFIG_CHR_DEV_SG is not set
+-# CONFIG_CHR_DEV_SCH is not set
+-
+-#
+-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+-#
+-# CONFIG_SCSI_MULTI_LUN is not set
++CONFIG_BLK_DEV_SR=y
++CONFIG_BLK_DEV_SR_VENDOR=y
++CONFIG_CHR_DEV_SG=y
++CONFIG_CHR_DEV_SCH=m
++CONFIG_SCSI_MULTI_LUN=y
+ # CONFIG_SCSI_CONSTANTS is not set
+ # CONFIG_SCSI_LOGGING is not set
+ # CONFIG_SCSI_SCAN_ASYNC is not set
+@@ -549,78 +1097,277 @@ CONFIG_SCSI_WAIT_SCAN=m
+ #
+ # CONFIG_SCSI_SPI_ATTRS is not set
+ # CONFIG_SCSI_FC_ATTRS is not set
+-# CONFIG_SCSI_ISCSI_ATTRS is not set
++CONFIG_SCSI_ISCSI_ATTRS=m
++# CONFIG_SCSI_SAS_ATTRS is not set
+ # CONFIG_SCSI_SAS_LIBSAS is not set
+ # CONFIG_SCSI_SRP_ATTRS is not set
+ CONFIG_SCSI_LOWLEVEL=y
+-# CONFIG_ISCSI_TCP is not set
++CONFIG_ISCSI_TCP=m
++# CONFIG_LIBFC is not set
++# CONFIG_LIBFCOE is not set
+ # CONFIG_SCSI_DEBUG is not set
+ # CONFIG_SCSI_DH is not set
++# CONFIG_SCSI_OSD_INITIATOR is not set
+ # CONFIG_ATA is not set
+-# CONFIG_MD is not set
++CONFIG_MD=y
++CONFIG_BLK_DEV_MD=m
++CONFIG_MD_LINEAR=m
++CONFIG_MD_RAID0=m
++CONFIG_MD_RAID1=m
++CONFIG_MD_RAID10=m
++CONFIG_MD_RAID456=m
++CONFIG_MD_RAID6_PQ=m
++# CONFIG_ASYNC_RAID6_TEST is not set
++CONFIG_MD_MULTIPATH=m
++CONFIG_MD_FAULTY=m
++CONFIG_BLK_DEV_DM=m
++# CONFIG_DM_DEBUG is not set
++CONFIG_DM_CRYPT=m
++CONFIG_DM_SNAPSHOT=m
++CONFIG_DM_MIRROR=m
++# CONFIG_DM_LOG_USERSPACE is not set
++CONFIG_DM_ZERO=m
++CONFIG_DM_MULTIPATH=m
++# CONFIG_DM_MULTIPATH_QL is not set
++# CONFIG_DM_MULTIPATH_ST is not set
++CONFIG_DM_DELAY=m
++# CONFIG_DM_UEVENT is not set
+ CONFIG_NETDEVICES=y
+-# CONFIG_DUMMY is not set
+-# CONFIG_BONDING is not set
+-# CONFIG_MACVLAN is not set
+-# CONFIG_EQUALIZER is not set
+-# CONFIG_TUN is not set
+-# CONFIG_VETH is not set
+-# CONFIG_NET_ETHERNET is not set
++CONFIG_DUMMY=m
++CONFIG_BONDING=m
++CONFIG_MACVLAN=m
++CONFIG_EQUALIZER=m
++CONFIG_TUN=m
++CONFIG_VETH=m
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_NATIONAL_PHY is not set
++# CONFIG_STE10XP is not set
++# CONFIG_LSI_ET1011C_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++# CONFIG_AX88796 is not set
++# CONFIG_SMC91X is not set
++# CONFIG_TI_DAVINCI_EMAC is not set
++# CONFIG_DM9000 is not set
++CONFIG_ENC28J60=y
++# CONFIG_ENC28J60_WRITEVERIFY is not set
++# CONFIG_ETHOC is not set
++CONFIG_SMC911X=y
++CONFIG_SMSC911X=y
++# CONFIG_DNET is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
++# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
++# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
++# CONFIG_B44 is not set
++# CONFIG_KS8842 is not set
++CONFIG_KS8851=y
++# CONFIG_KS8851_MLL is not set
+ # CONFIG_NETDEV_1000 is not set
+ # CONFIG_NETDEV_10000 is not set
+-
+-#
+-# Wireless LAN
+-#
+-# CONFIG_WLAN_PRE80211 is not set
+-# CONFIG_WLAN_80211 is not set
+-# CONFIG_IWLWIFI_LEDS is not set
++CONFIG_WLAN=y
++# CONFIG_LIBERTAS_THINFIRM is not set
++CONFIG_AT76C50X_USB=m
++CONFIG_USB_ZD1201=m
++CONFIG_USB_NET_RNDIS_WLAN=m
++CONFIG_RTL8187=m
++CONFIG_RTL8187_LEDS=y
++# CONFIG_MAC80211_HWSIM is not set
++# CONFIG_ATH_COMMON is not set
++CONFIG_B43=m
++# CONFIG_B43_SDIO is not set
++CONFIG_B43_PHY_LP=y
++CONFIG_B43_LEDS=y
++CONFIG_B43_HWRNG=y
++# CONFIG_B43_DEBUG is not set
++# CONFIG_B43LEGACY is not set
++CONFIG_HOSTAP=m
++CONFIG_HOSTAP_FIRMWARE=y
++CONFIG_HOSTAP_FIRMWARE_NVRAM=y
++# CONFIG_IWM is not set
++CONFIG_LIBERTAS=m
++CONFIG_LIBERTAS_USB=m
++# CONFIG_LIBERTAS_SDIO is not set
++# CONFIG_LIBERTAS_SPI is not set
++# CONFIG_LIBERTAS_DEBUG is not set
++CONFIG_P54_COMMON=m
++CONFIG_P54_USB=m
++# CONFIG_P54_SPI is not set
++CONFIG_P54_LEDS=y
++CONFIG_RT2X00=m
++CONFIG_RT2500USB=m
++CONFIG_RT73USB=m
++# CONFIG_RT2800USB is not set
++CONFIG_RT2X00_LIB_USB=m
++CONFIG_RT2X00_LIB=m
++CONFIG_RT2X00_LIB_FIRMWARE=y
++CONFIG_RT2X00_LIB_CRYPTO=y
++CONFIG_RT2X00_LIB_LEDS=y
++# CONFIG_RT2X00_DEBUG is not set
++CONFIG_WL12XX=m
++CONFIG_WL1251=m
++CONFIG_WL1251_SPI=m
++CONFIG_WL1251_SDIO=m
++CONFIG_WL1271=m
++CONFIG_ZD1211RW=m
++# CONFIG_ZD1211RW_DEBUG is not set
++
++#
++# WiMAX Wireless Broadband devices
++#
++CONFIG_WIMAX_I2400M=m
++CONFIG_WIMAX_I2400M_USB=m
++CONFIG_WIMAX_I2400M_SDIO=m
++CONFIG_WIMAX_IWMC3200_SDIO=y
++CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
+ 
+ #
+ # USB Network Adapters
+ #
+-# CONFIG_USB_CATC is not set
+-# CONFIG_USB_KAWETH is not set
+-# CONFIG_USB_PEGASUS is not set
+-# CONFIG_USB_RTL8150 is not set
+-# CONFIG_USB_USBNET is not set
++CONFIG_USB_CATC=y
++CONFIG_USB_KAWETH=y
++CONFIG_USB_PEGASUS=y
++CONFIG_USB_RTL8150=y
++CONFIG_USB_USBNET=y
++CONFIG_USB_NET_AX8817X=y
++CONFIG_USB_NET_CDCETHER=y
++CONFIG_USB_NET_CDC_EEM=y
++CONFIG_USB_NET_DM9601=y
++CONFIG_USB_NET_SMSC95XX=y
++CONFIG_USB_NET_GL620A=y
++CONFIG_USB_NET_NET1080=y
++CONFIG_USB_NET_PLUSB=y
++CONFIG_USB_NET_MCS7830=y
++CONFIG_USB_NET_RNDIS_HOST=y
++CONFIG_USB_NET_CDC_SUBSET=y
++CONFIG_USB_ALI_M5632=y
++CONFIG_USB_AN2720=y
++CONFIG_USB_BELKIN=y
++CONFIG_USB_ARMLINUX=y
++CONFIG_USB_EPSON2888=y
++CONFIG_USB_KC2190=y
++CONFIG_USB_NET_ZAURUS=y
++CONFIG_USB_HSO=m
++CONFIG_USB_NET_INT51X1=m
+ # CONFIG_WAN is not set
+-# CONFIG_PPP is not set
++CONFIG_ATM_DRIVERS=y
++# CONFIG_ATM_DUMMY is not set
++# CONFIG_ATM_TCP is not set
++CONFIG_PPP=m
++CONFIG_PPP_MULTILINK=y
++CONFIG_PPP_FILTER=y
++CONFIG_PPP_ASYNC=m
++CONFIG_PPP_SYNC_TTY=m
++CONFIG_PPP_DEFLATE=m
++CONFIG_PPP_BSDCOMP=m
++CONFIG_PPP_MPPE=m
++CONFIG_PPPOE=m
++# CONFIG_PPPOATM is not set
++CONFIG_PPPOL2TP=m
+ # CONFIG_SLIP is not set
+-# CONFIG_NETCONSOLE is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
++CONFIG_SLHC=m
++CONFIG_NETCONSOLE=m
++CONFIG_NETCONSOLE_DYNAMIC=y
++CONFIG_NETPOLL=y
++CONFIG_NETPOLL_TRAP=y
++CONFIG_NET_POLL_CONTROLLER=y
+ # CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
+ 
+ #
+ # Input device support
+ #
+ CONFIG_INPUT=y
+-# CONFIG_INPUT_FF_MEMLESS is not set
+-# CONFIG_INPUT_POLLDEV is not set
++CONFIG_INPUT_FF_MEMLESS=y
++CONFIG_INPUT_POLLDEV=y
++# CONFIG_INPUT_SPARSEKMAP is not set
+ 
+ #
+ # Userland interfaces
+ #
+-# CONFIG_INPUT_MOUSEDEV is not set
++CONFIG_INPUT_MOUSEDEV=y
++CONFIG_INPUT_MOUSEDEV_PSAUX=y
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+ # CONFIG_INPUT_JOYDEV is not set
+-# CONFIG_INPUT_EVDEV is not set
++CONFIG_INPUT_EVDEV=y
+ # CONFIG_INPUT_EVBUG is not set
+ 
+ #
+ # Input Device Drivers
+ #
+-# CONFIG_INPUT_KEYBOARD is not set
+-# CONFIG_INPUT_MOUSE is not set
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ADP5588 is not set
++# CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_QT2160 is not set
++# CONFIG_KEYBOARD_LKKBD is not set
++CONFIG_KEYBOARD_GPIO=y
++# CONFIG_KEYBOARD_TCA6416 is not set
++# CONFIG_KEYBOARD_MATRIX is not set
++# CONFIG_KEYBOARD_LM8323 is not set
++# CONFIG_KEYBOARD_MAX7359 is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_OPENCORES is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_TWL4030 is not set
++# CONFIG_KEYBOARD_XTKBD is not set
++CONFIG_INPUT_MOUSE=y
++CONFIG_MOUSE_PS2=y
++CONFIG_MOUSE_PS2_ALPS=y
++CONFIG_MOUSE_PS2_LOGIPS2PP=y
++CONFIG_MOUSE_PS2_SYNAPTICS=y
++CONFIG_MOUSE_PS2_TRACKPOINT=y
++# CONFIG_MOUSE_PS2_ELANTECH is not set
++# CONFIG_MOUSE_PS2_SENTELIC is not set
++# CONFIG_MOUSE_PS2_TOUCHKIT is not set
++# CONFIG_MOUSE_SERIAL is not set
++# CONFIG_MOUSE_APPLETOUCH is not set
++# CONFIG_MOUSE_BCM5974 is not set
++# CONFIG_MOUSE_VSXXXAA is not set
++# CONFIG_MOUSE_GPIO is not set
++# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+ # CONFIG_INPUT_JOYSTICK is not set
+ # CONFIG_INPUT_TABLET is not set
+ # CONFIG_INPUT_TOUCHSCREEN is not set
+-# CONFIG_INPUT_MISC is not set
++CONFIG_INPUT_MISC=y
++# CONFIG_INPUT_ATI_REMOTE is not set
++# CONFIG_INPUT_ATI_REMOTE2 is not set
++# CONFIG_INPUT_KEYSPAN_REMOTE is not set
++# CONFIG_INPUT_POWERMATE is not set
++# CONFIG_INPUT_YEALINK is not set
++# CONFIG_INPUT_CM109 is not set
++CONFIG_INPUT_TWL4030_PWRBUTTON=y
++CONFIG_INPUT_UINPUT=y
++# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+ 
+ #
+ # Hardware I/O ports
+ #
+-# CONFIG_SERIO is not set
++CONFIG_SERIO=y
++CONFIG_SERIO_SERPORT=y
++CONFIG_SERIO_LIBPS2=y
++# CONFIG_SERIO_RAW is not set
++# CONFIG_SERIO_ALTERA_PS2 is not set
+ # CONFIG_GAMEPORT is not set
+ 
+ #
+@@ -630,7 +1377,7 @@ CONFIG_VT=y
+ CONFIG_CONSOLE_TRANSLATIONS=y
+ CONFIG_VT_CONSOLE=y
+ CONFIG_HW_CONSOLE=y
+-# CONFIG_VT_HW_CONSOLE_BINDING is not set
++CONFIG_VT_HW_CONSOLE_BINDING=y
+ CONFIG_DEVKMEM=y
+ # CONFIG_SERIAL_NONSTANDARD is not set
+ 
+@@ -650,18 +1397,21 @@ CONFIG_SERIAL_8250_RSA=y
+ #
+ # Non-8250 serial port support
+ #
++# CONFIG_SERIAL_MAX3100 is not set
+ CONFIG_SERIAL_CORE=y
+ CONFIG_SERIAL_CORE_CONSOLE=y
+ CONFIG_UNIX98_PTYS=y
++# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+ # CONFIG_LEGACY_PTYS is not set
+ # CONFIG_IPMI_HANDLER is not set
+ CONFIG_HW_RANDOM=y
+-# CONFIG_NVRAM is not set
++# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+ # CONFIG_R3964 is not set
+ # CONFIG_RAW_DRIVER is not set
+ # CONFIG_TCG_TPM is not set
+ CONFIG_I2C=y
+ CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_COMPAT=y
+ CONFIG_I2C_CHARDEV=y
+ CONFIG_I2C_HELPER_AUTO=y
+ 
+@@ -672,6 +1422,7 @@ CONFIG_I2C_HELPER_AUTO=y
+ #
+ # I2C system bus drivers (mostly embedded / system-on-chip)
+ #
++# CONFIG_I2C_DESIGNWARE is not set
+ # CONFIG_I2C_GPIO is not set
+ # CONFIG_I2C_OCORES is not set
+ CONFIG_I2C_OMAP=y
+@@ -693,26 +1444,41 @@ CONFIG_I2C_OMAP=y
+ #
+ # Miscellaneous I2C Chip support
+ #
+-# CONFIG_DS1682 is not set
+-# CONFIG_EEPROM_AT24 is not set
+-# CONFIG_EEPROM_LEGACY is not set
+-# CONFIG_SENSORS_PCF8574 is not set
+-# CONFIG_PCF8575 is not set
+-# CONFIG_SENSORS_PCA9539 is not set
+-# CONFIG_SENSORS_PCF8591 is not set
+-# CONFIG_ISP1301_OMAP is not set
+-# CONFIG_TPS65010 is not set
+-# CONFIG_SENSORS_MAX6875 is not set
+ # CONFIG_SENSORS_TSL2550 is not set
+ # CONFIG_I2C_DEBUG_CORE is not set
+ # CONFIG_I2C_DEBUG_ALGO is not set
+ # CONFIG_I2C_DEBUG_BUS is not set
+ # CONFIG_I2C_DEBUG_CHIP is not set
+-# CONFIG_SPI is not set
++CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++# CONFIG_SPI_BITBANG is not set
++# CONFIG_SPI_GPIO is not set
++CONFIG_SPI_OMAP24XX=y
++# CONFIG_SPI_XILINX is not set
++
++#
++# SPI Protocol Masters
++#
++CONFIG_SPI_SPIDEV=y
++# CONFIG_SPI_TLE62X0 is not set
++
++#
++# PPS support
++#
++# CONFIG_PPS is not set
+ CONFIG_ARCH_REQUIRE_GPIOLIB=y
+ CONFIG_GPIOLIB=y
+ # CONFIG_DEBUG_GPIO is not set
+-# CONFIG_GPIO_SYSFS is not set
++CONFIG_GPIO_SYSFS=y
++
++#
++# Memory mapped GPIO expanders:
++#
+ 
+ #
+ # I2C GPIO expanders:
+@@ -729,49 +1495,469 @@ CONFIG_GPIO_TWL4030=y
+ #
+ # SPI GPIO expanders:
+ #
++# CONFIG_GPIO_MAX7301 is not set
++# CONFIG_GPIO_MCP23S08 is not set
++# CONFIG_GPIO_MC33880 is not set
++
++#
++# AC97 GPIO expanders:
++#
+ # CONFIG_W1 is not set
+-# CONFIG_POWER_SUPPLY is not set
+-# CONFIG_HWMON is not set
+-# CONFIG_THERMAL is not set
+-# CONFIG_THERMAL_HWMON is not set
+-# CONFIG_WATCHDOG is not set
++CONFIG_POWER_SUPPLY=m
++# CONFIG_POWER_SUPPLY_DEBUG is not set
++# CONFIG_PDA_POWER is not set
++# CONFIG_BATTERY_DS2760 is not set
++# CONFIG_BATTERY_DS2782 is not set
++# CONFIG_BATTERY_BQ27x00 is not set
++# CONFIG_BATTERY_MAX17040 is not set
++CONFIG_HWMON=y
++# CONFIG_HWMON_VID is not set
++# CONFIG_HWMON_DEBUG_CHIP is not set
++
++#
++# Native drivers
++#
++# CONFIG_SENSORS_AD7414 is not set
++# CONFIG_SENSORS_AD7418 is not set
++# CONFIG_SENSORS_ADCXX is not set
++# CONFIG_SENSORS_ADM1021 is not set
++# CONFIG_SENSORS_ADM1025 is not set
++# CONFIG_SENSORS_ADM1026 is not set
++# CONFIG_SENSORS_ADM1029 is not set
++# CONFIG_SENSORS_ADM1031 is not set
++# CONFIG_SENSORS_ADM9240 is not set
++# CONFIG_SENSORS_ADT7462 is not set
++# CONFIG_SENSORS_ADT7470 is not set
++# CONFIG_SENSORS_ADT7473 is not set
++# CONFIG_SENSORS_ADT7475 is not set
++# CONFIG_SENSORS_ATXP1 is not set
++# CONFIG_SENSORS_DS1621 is not set
++# CONFIG_SENSORS_F71805F is not set
++# CONFIG_SENSORS_F71882FG is not set
++# CONFIG_SENSORS_F75375S is not set
++# CONFIG_SENSORS_G760A is not set
++# CONFIG_SENSORS_GL518SM is not set
++# CONFIG_SENSORS_GL520SM is not set
++# CONFIG_SENSORS_IT87 is not set
++# CONFIG_SENSORS_LM63 is not set
++# CONFIG_SENSORS_LM70 is not set
++# CONFIG_SENSORS_LM73 is not set
++# CONFIG_SENSORS_LM75 is not set
++# CONFIG_SENSORS_LM77 is not set
++# CONFIG_SENSORS_LM78 is not set
++# CONFIG_SENSORS_LM80 is not set
++# CONFIG_SENSORS_LM83 is not set
++# CONFIG_SENSORS_LM85 is not set
++# CONFIG_SENSORS_LM87 is not set
++# CONFIG_SENSORS_LM90 is not set
++# CONFIG_SENSORS_LM92 is not set
++# CONFIG_SENSORS_LM93 is not set
++# CONFIG_SENSORS_LTC4215 is not set
++# CONFIG_SENSORS_LTC4245 is not set
++# CONFIG_SENSORS_LM95241 is not set
++# CONFIG_SENSORS_MAX1111 is not set
++# CONFIG_SENSORS_MAX1619 is not set
++# CONFIG_SENSORS_MAX6650 is not set
++# CONFIG_SENSORS_PC87360 is not set
++# CONFIG_SENSORS_PC87427 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_SENSORS_SHT15 is not set
++# CONFIG_SENSORS_DME1737 is not set
++# CONFIG_SENSORS_SMSC47M1 is not set
++# CONFIG_SENSORS_SMSC47M192 is not set
++# CONFIG_SENSORS_SMSC47B397 is not set
++# CONFIG_SENSORS_ADS7828 is not set
++# CONFIG_SENSORS_THMC50 is not set
++# CONFIG_SENSORS_TMP401 is not set
++# CONFIG_SENSORS_TMP421 is not set
++# CONFIG_SENSORS_VT1211 is not set
++# CONFIG_SENSORS_W83781D is not set
++# CONFIG_SENSORS_W83791D is not set
++# CONFIG_SENSORS_W83792D is not set
++# CONFIG_SENSORS_W83793 is not set
++# CONFIG_SENSORS_W83L785TS is not set
++# CONFIG_SENSORS_W83L786NG is not set
++# CONFIG_SENSORS_W83627HF is not set
++# CONFIG_SENSORS_W83627EHF is not set
++# CONFIG_SENSORS_LIS3_SPI is not set
++CONFIG_THERMAL=y
++CONFIG_THERMAL_HWMON=y
++CONFIG_WATCHDOG=y
++CONFIG_WATCHDOG_NOWAYOUT=y
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_OMAP_WATCHDOG=y
++# CONFIG_TWL4030_WATCHDOG is not set
++
++#
++# USB-based Watchdog Cards
++#
++# CONFIG_USBPCWATCHDOG is not set
++CONFIG_SSB_POSSIBLE=y
+ 
+ #
+ # Sonics Silicon Backplane
+ #
+-CONFIG_SSB_POSSIBLE=y
+-# CONFIG_SSB is not set
++CONFIG_SSB=y
++CONFIG_SSB_SDIOHOST_POSSIBLE=y
++# CONFIG_SSB_SDIOHOST is not set
++# CONFIG_SSB_SILENT is not set
++# CONFIG_SSB_DEBUG is not set
+ 
+ #
+ # Multifunction device drivers
+ #
+-# CONFIG_MFD_CORE is not set
++CONFIG_MFD_CORE=y
+ # CONFIG_MFD_SM501 is not set
++# CONFIG_MFD_ASIC3 is not set
+ # CONFIG_HTC_EGPIO is not set
+ # CONFIG_HTC_PASIC3 is not set
++# CONFIG_TPS65010 is not set
+ CONFIG_TWL4030_CORE=y
+-# CONFIG_UCB1400_CORE is not set
++CONFIG_TWL4030_POWER=y
++CONFIG_TWL4030_CODEC=y
++# CONFIG_TWL4030_MADC is not set
+ # CONFIG_MFD_TMIO is not set
+ # CONFIG_MFD_T7L66XB is not set
+ # CONFIG_MFD_TC6387XB is not set
+ # CONFIG_MFD_TC6393XB is not set
+-
+-#
+-# Multimedia devices
+-#
++# CONFIG_PMIC_DA903X is not set
++# CONFIG_PMIC_ADP5520 is not set
++# CONFIG_MFD_WM8400 is not set
++# CONFIG_MFD_WM831X is not set
++# CONFIG_MFD_WM8350_I2C is not set
++# CONFIG_MFD_PCF50633 is not set
++# CONFIG_MFD_MC13783 is not set
++# CONFIG_AB3100_CORE is not set
++# CONFIG_EZX_PCAP is not set
++# CONFIG_MFD_88PM8607 is not set
++# CONFIG_AB4500_CORE is not set
++CONFIG_REGULATOR=y
++# CONFIG_REGULATOR_DEBUG is not set
++# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
++# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
++# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
++# CONFIG_REGULATOR_BQ24022 is not set
++# CONFIG_REGULATOR_MAX1586 is not set
++CONFIG_REGULATOR_TWL4030=y
++# CONFIG_REGULATOR_LP3971 is not set
++# CONFIG_REGULATOR_TPS65023 is not set
++# CONFIG_REGULATOR_TPS6507X is not set
++CONFIG_MEDIA_SUPPORT=y
+ 
+ #
+ # Multimedia core support
+ #
+-# CONFIG_VIDEO_DEV is not set
+-# CONFIG_DVB_CORE is not set
+-# CONFIG_VIDEO_MEDIA is not set
++CONFIG_VIDEO_DEV=y
++CONFIG_VIDEO_V4L2_COMMON=y
++CONFIG_VIDEO_ALLOW_V4L1=y
++CONFIG_VIDEO_V4L1_COMPAT=y
++CONFIG_DVB_CORE=m
++CONFIG_VIDEO_MEDIA=m
+ 
+ #
+ # Multimedia drivers
+ #
+-CONFIG_DAB=y
+-# CONFIG_USB_DABUSB is not set
++CONFIG_MEDIA_ATTACH=y
++CONFIG_MEDIA_TUNER=m
++CONFIG_MEDIA_TUNER_CUSTOMISE=y
++CONFIG_MEDIA_TUNER_SIMPLE=m
++CONFIG_MEDIA_TUNER_TDA8290=m
++CONFIG_MEDIA_TUNER_TDA827X=m
++CONFIG_MEDIA_TUNER_TDA18271=m
++CONFIG_MEDIA_TUNER_TDA9887=m
++CONFIG_MEDIA_TUNER_TEA5761=m
++CONFIG_MEDIA_TUNER_TEA5767=m
++CONFIG_MEDIA_TUNER_MT20XX=m
++CONFIG_MEDIA_TUNER_MT2060=m
++CONFIG_MEDIA_TUNER_MT2266=m
++CONFIG_MEDIA_TUNER_MT2131=m
++CONFIG_MEDIA_TUNER_QT1010=m
++CONFIG_MEDIA_TUNER_XC2028=m
++CONFIG_MEDIA_TUNER_XC5000=m
++CONFIG_MEDIA_TUNER_MXL5005S=m
++CONFIG_MEDIA_TUNER_MXL5007T=m
++CONFIG_MEDIA_TUNER_MC44S803=m
++CONFIG_MEDIA_TUNER_MAX2165=m
++CONFIG_VIDEO_V4L2=y
++CONFIG_VIDEO_V4L1=y
++CONFIG_VIDEOBUF_GEN=y
++CONFIG_VIDEOBUF_DMA_SG=y
++CONFIG_VIDEOBUF_VMALLOC=m
++CONFIG_VIDEOBUF_DMA_CONTIG=y
++CONFIG_VIDEOBUF_DVB=m
++CONFIG_VIDEO_IR=m
++CONFIG_VIDEO_TVEEPROM=m
++CONFIG_VIDEO_TUNER=m
++CONFIG_VIDEO_CAPTURE_DRIVERS=y
++# CONFIG_VIDEO_ADV_DEBUG is not set
++# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
++# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
++CONFIG_VIDEO_IR_I2C=m
++
++#
++# Encoders/decoders and other helper chips
++#
++
++#
++# Audio decoders
++#
++# CONFIG_VIDEO_TVAUDIO is not set
++# CONFIG_VIDEO_TDA7432 is not set
++# CONFIG_VIDEO_TDA9840 is not set
++# CONFIG_VIDEO_TDA9875 is not set
++# CONFIG_VIDEO_TEA6415C is not set
++# CONFIG_VIDEO_TEA6420 is not set
++CONFIG_VIDEO_MSP3400=m
++# CONFIG_VIDEO_CS5345 is not set
++CONFIG_VIDEO_CS53L32A=m
++# CONFIG_VIDEO_M52790 is not set
++# CONFIG_VIDEO_TLV320AIC23B is not set
++CONFIG_VIDEO_WM8775=m
++# CONFIG_VIDEO_WM8739 is not set
++# CONFIG_VIDEO_VP27SMPX is not set
++
++#
++# RDS decoders
++#
++# CONFIG_VIDEO_SAA6588 is not set
++
++#
++# Video decoders
++#
++# CONFIG_VIDEO_ADV7180 is not set
++# CONFIG_VIDEO_BT819 is not set
++# CONFIG_VIDEO_BT856 is not set
++# CONFIG_VIDEO_BT866 is not set
++# CONFIG_VIDEO_KS0127 is not set
++# CONFIG_VIDEO_OV7670 is not set
++CONFIG_VIDEO_MT9V011=m
++# CONFIG_VIDEO_TCM825X is not set
++CONFIG_VIDEO_MT9P012=m
++# CONFIG_VIDEO_MT9T111 is not set
++# CONFIG_VIDEO_DW9710 is not set
++# CONFIG_VIDEO_OV3640 is not set
++# CONFIG_VIDEO_IMX046 is not set
++# CONFIG_VIDEO_LV8093 is not set
++# CONFIG_VIDEO_SAA7110 is not set
++CONFIG_VIDEO_SAA711X=m
++# CONFIG_VIDEO_SAA717X is not set
++# CONFIG_VIDEO_SAA7191 is not set
++# CONFIG_VIDEO_TVP514X is not set
++# CONFIG_VIDEO_TVP5150 is not set
++# CONFIG_VIDEO_VPX3220 is not set
++
++#
++# Video and audio decoders
++#
++CONFIG_VIDEO_CX25840=m
++
++#
++# MPEG video encoders
++#
++CONFIG_VIDEO_CX2341X=m
++
++#
++# Video encoders
++#
++# CONFIG_VIDEO_SAA7127 is not set
++# CONFIG_VIDEO_SAA7185 is not set
++# CONFIG_VIDEO_ADV7170 is not set
++# CONFIG_VIDEO_ADV7175 is not set
++# CONFIG_VIDEO_THS7303 is not set
++# CONFIG_VIDEO_ADV7343 is not set
++
++#
++# Video improvement chips
++#
++# CONFIG_VIDEO_UPD64031A is not set
++# CONFIG_VIDEO_UPD64083 is not set
++CONFIG_VIDEO_VIVI=m
++# CONFIG_VIDEO_CPIA is not set
++# CONFIG_VIDEO_CPIA2 is not set
++# CONFIG_VIDEO_SAA5246A is not set
++# CONFIG_VIDEO_SAA5249 is not set
++# CONFIG_VIDEO_AU0828 is not set
++CONFIG_TI_MEDIA=y
++CONFIG_VIDEO_VPSS_SYSTEM=y
++CONFIG_VIDEO_VPFE_CAPTURE=y
++# CONFIG_VIDEO_DM6446_CCDC is not set
++# CONFIG_VIDEO_DM355_CCDC is not set
++CONFIG_VIDEO_OMAP2_VOUT=y
++CONFIG_VIDEO_OMAP3=y
++CONFIG_VIDEO_OMAP3_ISP=y
++CONFIG_VIDEO_OMAP34XX_ISP_PREVIEWER=y
++CONFIG_VIDEO_OMAP34XX_ISP_RESIZER=y
++# CONFIG_SOC_CAMERA is not set
++CONFIG_V4L_USB_DRIVERS=y
++CONFIG_USB_VIDEO_CLASS=m
++CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
++CONFIG_USB_GSPCA=m
++CONFIG_USB_M5602=m
++CONFIG_USB_STV06XX=m
++# CONFIG_USB_GL860 is not set
++CONFIG_USB_GSPCA_CONEX=m
++CONFIG_USB_GSPCA_ETOMS=m
++CONFIG_USB_GSPCA_FINEPIX=m
++# CONFIG_USB_GSPCA_JEILINJ is not set
++CONFIG_USB_GSPCA_MARS=m
++# CONFIG_USB_GSPCA_MR97310A is not set
++CONFIG_USB_GSPCA_OV519=m
++CONFIG_USB_GSPCA_OV534=m
++CONFIG_USB_GSPCA_PAC207=m
++# CONFIG_USB_GSPCA_PAC7302 is not set
++CONFIG_USB_GSPCA_PAC7311=m
++# CONFIG_USB_GSPCA_SN9C20X is not set
++CONFIG_USB_GSPCA_SONIXB=m
++CONFIG_USB_GSPCA_SONIXJ=m
++CONFIG_USB_GSPCA_SPCA500=m
++CONFIG_USB_GSPCA_SPCA501=m
++CONFIG_USB_GSPCA_SPCA505=m
++CONFIG_USB_GSPCA_SPCA506=m
++CONFIG_USB_GSPCA_SPCA508=m
++CONFIG_USB_GSPCA_SPCA561=m
++# CONFIG_USB_GSPCA_SQ905 is not set
++# CONFIG_USB_GSPCA_SQ905C is not set
++CONFIG_USB_GSPCA_STK014=m
++# CONFIG_USB_GSPCA_STV0680 is not set
++CONFIG_USB_GSPCA_SUNPLUS=m
++CONFIG_USB_GSPCA_T613=m
++CONFIG_USB_GSPCA_TV8532=m
++CONFIG_USB_GSPCA_VC032X=m
++CONFIG_USB_GSPCA_ZC3XX=m
++CONFIG_VIDEO_PVRUSB2=m
++CONFIG_VIDEO_PVRUSB2_SYSFS=y
++CONFIG_VIDEO_PVRUSB2_DVB=y
++# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
++CONFIG_VIDEO_HDPVR=m
++CONFIG_VIDEO_EM28XX=m
++CONFIG_VIDEO_EM28XX_ALSA=m
++CONFIG_VIDEO_EM28XX_DVB=m
++CONFIG_VIDEO_CX231XX=m
++# CONFIG_VIDEO_CX231XX_ALSA is not set
++CONFIG_VIDEO_CX231XX_DVB=m
++CONFIG_VIDEO_USBVISION=m
++CONFIG_VIDEO_USBVIDEO=m
++CONFIG_USB_VICAM=m
++CONFIG_USB_IBMCAM=m
++CONFIG_USB_KONICAWC=m
++CONFIG_USB_QUICKCAM_MESSENGER=m
++CONFIG_USB_ET61X251=m
++CONFIG_VIDEO_OVCAMCHIP=m
++CONFIG_USB_W9968CF=m
++CONFIG_USB_OV511=m
++CONFIG_USB_SE401=m
++CONFIG_USB_SN9C102=m
++CONFIG_USB_STV680=m
++CONFIG_USB_ZC0301=m
++CONFIG_USB_PWC=m
++# CONFIG_USB_PWC_DEBUG is not set
++CONFIG_USB_PWC_INPUT_EVDEV=y
++CONFIG_USB_ZR364XX=m
++CONFIG_USB_STKWEBCAM=m
++CONFIG_USB_S2255=m
++CONFIG_RADIO_ADAPTERS=y
++# CONFIG_I2C_SI4713 is not set
++# CONFIG_RADIO_SI4713 is not set
++# CONFIG_USB_DSBR is not set
++# CONFIG_RADIO_SI470X is not set
++# CONFIG_USB_MR800 is not set
++# CONFIG_RADIO_TEA5764 is not set
++# CONFIG_RADIO_TEF6862 is not set
++CONFIG_DVB_MAX_ADAPTERS=8
++CONFIG_DVB_DYNAMIC_MINORS=y
++CONFIG_DVB_CAPTURE_DRIVERS=y
++# CONFIG_TTPCI_EEPROM is not set
++
++#
++# Supported USB Adapters
++#
++CONFIG_DVB_USB=m
++# CONFIG_DVB_USB_DEBUG is not set
++CONFIG_DVB_USB_A800=m
++CONFIG_DVB_USB_DIBUSB_MB=m
++# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
++CONFIG_DVB_USB_DIBUSB_MC=m
++CONFIG_DVB_USB_DIB0700=m
++CONFIG_DVB_USB_UMT_010=m
++CONFIG_DVB_USB_CXUSB=m
++CONFIG_DVB_USB_M920X=m
++CONFIG_DVB_USB_GL861=m
++CONFIG_DVB_USB_AU6610=m
++CONFIG_DVB_USB_DIGITV=m
++CONFIG_DVB_USB_VP7045=m
++CONFIG_DVB_USB_VP702X=m
++CONFIG_DVB_USB_GP8PSK=m
++CONFIG_DVB_USB_NOVA_T_USB2=m
++CONFIG_DVB_USB_TTUSB2=m
++CONFIG_DVB_USB_DTT200U=m
++CONFIG_DVB_USB_OPERA1=m
++CONFIG_DVB_USB_AF9005=m
++CONFIG_DVB_USB_AF9005_REMOTE=m
++CONFIG_DVB_USB_DW2102=m
++CONFIG_DVB_USB_CINERGY_T2=m
++CONFIG_DVB_USB_ANYSEE=m
++CONFIG_DVB_USB_DTV5100=m
++CONFIG_DVB_USB_AF9015=m
++# CONFIG_DVB_USB_CE6230 is not set
++# CONFIG_DVB_USB_FRIIO is not set
++# CONFIG_DVB_USB_EC168 is not set
++# CONFIG_SMS_SIANO_MDTV is not set
++
++#
++# Supported FlexCopII (B2C2) Adapters
++#
++CONFIG_DVB_B2C2_FLEXCOP=m
++CONFIG_DVB_B2C2_FLEXCOP_USB=m
++# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
++
++#
++# Supported DVB Frontends
++#
++# CONFIG_DVB_FE_CUSTOMISE is not set
++CONFIG_DVB_CX24123=m
++CONFIG_DVB_MT312=m
++CONFIG_DVB_ZL10039=m
++CONFIG_DVB_S5H1420=m
++CONFIG_DVB_STV0288=m
++CONFIG_DVB_STB6000=m
++CONFIG_DVB_STV0299=m
++CONFIG_DVB_TDA10086=m
++CONFIG_DVB_TUNER_ITD1000=m
++CONFIG_DVB_TUNER_CX24113=m
++CONFIG_DVB_TDA826X=m
++CONFIG_DVB_CX24116=m
++CONFIG_DVB_SI21XX=m
++CONFIG_DVB_CX22702=m
++CONFIG_DVB_TDA1004X=m
++CONFIG_DVB_NXT6000=m
++CONFIG_DVB_MT352=m
++CONFIG_DVB_ZL10353=m
++CONFIG_DVB_DIB3000MB=m
++CONFIG_DVB_DIB3000MC=m
++CONFIG_DVB_DIB7000M=m
++CONFIG_DVB_DIB7000P=m
++CONFIG_DVB_TDA10048=m
++CONFIG_DVB_AF9013=m
++CONFIG_DVB_TDA10021=m
++CONFIG_DVB_TDA10023=m
++CONFIG_DVB_STV0297=m
++CONFIG_DVB_NXT200X=m
++CONFIG_DVB_BCM3510=m
++CONFIG_DVB_LGDT330X=m
++CONFIG_DVB_LGDT3305=m
++CONFIG_DVB_S5H1409=m
++CONFIG_DVB_S5H1411=m
++CONFIG_DVB_DIB8000=m
++CONFIG_DVB_PLL=m
++CONFIG_DVB_TUNER_DIB0070=m
++CONFIG_DVB_LNBP21=m
++CONFIG_DVB_ISL6421=m
++CONFIG_DVB_LGS8GL5=m
++# CONFIG_DAB is not set
+ 
+ #
+ # Graphics support
+@@ -781,6 +1967,7 @@ CONFIG_DAB=y
+ CONFIG_FB=y
+ # CONFIG_FIRMWARE_EDID is not set
+ # CONFIG_FB_DDC is not set
++# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+ CONFIG_FB_CFB_FILLRECT=y
+ CONFIG_FB_CFB_COPYAREA=y
+ CONFIG_FB_CFB_IMAGEBLIT=y
+@@ -793,24 +1980,57 @@ CONFIG_FB_CFB_IMAGEBLIT=y
+ # CONFIG_FB_SVGALIB is not set
+ # CONFIG_FB_MACMODES is not set
+ # CONFIG_FB_BACKLIGHT is not set
+-# CONFIG_FB_MODE_HELPERS is not set
++CONFIG_FB_MODE_HELPERS=y
+ # CONFIG_FB_TILEBLITTING is not set
+ 
+ #
+ # Frame buffer hardware drivers
+ #
+ # CONFIG_FB_S1D13XXX is not set
++# CONFIG_FB_TMIO is not set
+ # CONFIG_FB_VIRTUAL is not set
+-CONFIG_FB_OMAP=y
+-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
++# CONFIG_FB_METRONOME is not set
++# CONFIG_FB_MB862XX is not set
++# CONFIG_FB_BROADSHEET is not set
+ # CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
++CONFIG_OMAP2_VRAM=y
++CONFIG_OMAP2_VRFB=y
++CONFIG_OMAP2_DSS=y
++CONFIG_OMAP2_VRAM_SIZE=14
++CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
++# CONFIG_OMAP2_DSS_RFBI is not set
++CONFIG_OMAP2_DSS_VENC=y
++CONFIG_OMAP2_VENC_OUT_TYPE_SVIDEO=y
++# CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE is not set
++# CONFIG_OMAP2_DSS_SDI is not set
++CONFIG_OMAP2_DSS_DSI=y
++CONFIG_OMAP2_DSS_USE_DSI_PLL=y
++# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
++CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
++CONFIG_FB_OMAP2=y
++CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
++# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
++CONFIG_FB_OMAP2_NUM_FBS=3
++
++#
++# OMAP2/3 Display Device Drivers
++#
++CONFIG_PANEL_GENERIC=y
++# CONFIG_PANEL_LGPHILIPS_LB035Q02 is not set
++# CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C is not set
++CONFIG_PANEL_SHARP_LS037V7DW01=y
++# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set
++# CONFIG_PANEL_TAAL is not set
+ # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+ 
+ #
+ # Display device support
+ #
+-# CONFIG_DISPLAY_SUPPORT is not set
++CONFIG_DISPLAY_SUPPORT=y
++
++#
++# Display hardware drivers
++#
+ 
+ #
+ # Console display driver support
+@@ -820,31 +2040,113 @@ CONFIG_DUMMY_CONSOLE=y
+ CONFIG_FRAMEBUFFER_CONSOLE=y
+ # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+ CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+-CONFIG_FONTS=y
++# CONFIG_FONTS is not set
+ CONFIG_FONT_8x8=y
+ CONFIG_FONT_8x16=y
+-# CONFIG_FONT_6x11 is not set
+-# CONFIG_FONT_7x14 is not set
+-# CONFIG_FONT_PEARL_8x8 is not set
+-# CONFIG_FONT_ACORN_8x8 is not set
+-# CONFIG_FONT_MINI_4x6 is not set
+-# CONFIG_FONT_SUN8x16 is not set
+-# CONFIG_FONT_SUN12x22 is not set
+-# CONFIG_FONT_10x18 is not set
+-# CONFIG_LOGO is not set
+-
+-#
+-# Sound
+-#
+-# CONFIG_SOUND is not set
+-# CONFIG_HID_SUPPORT is not set
++CONFIG_LOGO=y
++# CONFIG_LOGO_LINUX_MONO is not set
++# CONFIG_LOGO_LINUX_VGA16 is not set
++CONFIG_LOGO_LINUX_CLUT224=y
++CONFIG_SOUND=y
++CONFIG_SOUND_OSS_CORE=y
++CONFIG_SOUND_OSS_CORE_PRECLAIM=y
++CONFIG_SND=y
++CONFIG_SND_TIMER=y
++CONFIG_SND_PCM=y
++CONFIG_SND_HWDEP=y
++CONFIG_SND_RAWMIDI=y
++CONFIG_SND_JACK=y
++CONFIG_SND_SEQUENCER=m
++# CONFIG_SND_SEQ_DUMMY is not set
++CONFIG_SND_OSSEMUL=y
++CONFIG_SND_MIXER_OSS=y
++CONFIG_SND_PCM_OSS=y
++CONFIG_SND_PCM_OSS_PLUGINS=y
++CONFIG_SND_SEQUENCER_OSS=y
++CONFIG_SND_HRTIMER=m
++CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
++# CONFIG_SND_DYNAMIC_MINORS is not set
++CONFIG_SND_SUPPORT_OLD_API=y
++CONFIG_SND_VERBOSE_PROCFS=y
++# CONFIG_SND_VERBOSE_PRINTK is not set
++# CONFIG_SND_DEBUG is not set
++CONFIG_SND_RAWMIDI_SEQ=m
++# CONFIG_SND_OPL3_LIB_SEQ is not set
++# CONFIG_SND_OPL4_LIB_SEQ is not set
++# CONFIG_SND_SBAWE_SEQ is not set
++# CONFIG_SND_EMU10K1_SEQ is not set
++CONFIG_SND_DRIVERS=y
++# CONFIG_SND_DUMMY is not set
++# CONFIG_SND_VIRMIDI is not set
++# CONFIG_SND_MTPAV is not set
++# CONFIG_SND_SERIAL_U16550 is not set
++# CONFIG_SND_MPU401 is not set
++# CONFIG_SND_ARM is not set
++CONFIG_SND_SPI=y
++CONFIG_SND_USB=y
++CONFIG_SND_USB_AUDIO=y
++CONFIG_SND_USB_CAIAQ=m
++CONFIG_SND_USB_CAIAQ_INPUT=y
++CONFIG_SND_SOC=y
++CONFIG_SND_OMAP_SOC=y
++CONFIG_SND_OMAP_SOC_MCBSP=y
++# CONFIG_SND_OMAP_SOC_OMAP3EVM is not set
++CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE=y
++CONFIG_SND_SOC_I2C_AND_SPI=y
++# CONFIG_SND_SOC_ALL_CODECS is not set
++CONFIG_SND_SOC_TWL4030=y
++# CONFIG_SOUND_PRIME is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HIDRAW is not set
++
++#
++# USB Input Devices
++#
++CONFIG_USB_HID=y
++# CONFIG_HID_PID is not set
++# CONFIG_USB_HIDDEV is not set
++
++#
++# Special HID drivers
++#
++CONFIG_HID_A4TECH=y
++CONFIG_HID_APPLE=y
++CONFIG_HID_BELKIN=y
++CONFIG_HID_CHERRY=y
++CONFIG_HID_CHICONY=y
++CONFIG_HID_CYPRESS=y
++# CONFIG_HID_DRAGONRISE is not set
++CONFIG_HID_EZKEY=y
++# CONFIG_HID_KYE is not set
++CONFIG_HID_GYRATION=y
++# CONFIG_HID_TWINHAN is not set
++# CONFIG_HID_KENSINGTON is not set
++CONFIG_HID_LOGITECH=y
++# CONFIG_LOGITECH_FF is not set
++# CONFIG_LOGIRUMBLEPAD2_FF is not set
++CONFIG_HID_MICROSOFT=y
++CONFIG_HID_MONTEREY=y
++CONFIG_HID_NTRIG=y
++CONFIG_HID_PANTHERLORD=y
++# CONFIG_PANTHERLORD_FF is not set
++CONFIG_HID_PETALYNX=y
++CONFIG_HID_SAMSUNG=y
++CONFIG_HID_SONY=y
++CONFIG_HID_SUNPLUS=y
++# CONFIG_HID_GREENASIA is not set
++# CONFIG_HID_SMARTJOYPLUS is not set
++CONFIG_HID_TOPSEED=y
++# CONFIG_HID_THRUSTMASTER is not set
++# CONFIG_HID_WACOM is not set
++# CONFIG_HID_ZEROPLUS is not set
+ CONFIG_USB_SUPPORT=y
+ CONFIG_USB_ARCH_HAS_HCD=y
+ CONFIG_USB_ARCH_HAS_OHCI=y
+ CONFIG_USB_ARCH_HAS_EHCI=y
+ CONFIG_USB=y
+ # CONFIG_USB_DEBUG is not set
+-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
++CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+ 
+ #
+ # Miscellaneous USB options
+@@ -857,18 +2159,25 @@ CONFIG_USB_OTG=y
+ # CONFIG_USB_OTG_WHITELIST is not set
+ # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+ CONFIG_USB_MON=y
++# CONFIG_USB_WUSB is not set
++# CONFIG_USB_WUSB_CBAF is not set
+ 
+ #
+ # USB Host Controller Drivers
+ #
+-CONFIG_USB_EHCI_HCD=y
+-CONFIG_USB_EHCI_ROOT_HUB_TT=y
+ # CONFIG_USB_C67X00_HCD is not set
++CONFIG_USB_EHCI_HCD=y
++# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
++CONFIG_USB_EHCI_TT_NEWSCHED=y
++# CONFIG_USB_OXU210HP_HCD is not set
+ # CONFIG_USB_ISP116X_HCD is not set
+ # CONFIG_USB_ISP1760_HCD is not set
++# CONFIG_USB_ISP1362_HCD is not set
+ # CONFIG_USB_OHCI_HCD is not set
++# CONFIG_USB_U132_HCD is not set
+ # CONFIG_USB_SL811_HCD is not set
+ # CONFIG_USB_R8A66597_HCD is not set
++# CONFIG_USB_HWA_HCD is not set
+ CONFIG_USB_MUSB_HDRC=y
+ CONFIG_USB_MUSB_SOC=y
+ 
+@@ -882,24 +2191,39 @@ CONFIG_USB_GADGET_MUSB_HDRC=y
+ CONFIG_USB_MUSB_HDRC_HCD=y
+ # CONFIG_MUSB_PIO_ONLY is not set
+ CONFIG_USB_INVENTRA_DMA=y
++CONFIG_MUSB_USE_SYSTEM_DMA_RX=y
+ # CONFIG_USB_TI_CPPI_DMA is not set
++# CONFIG_USB_TI_CPPI41_DMA is not set
+ # CONFIG_USB_MUSB_DEBUG is not set
+ 
+ #
+ # USB Device Class drivers
+ #
+-# CONFIG_USB_ACM is not set
+-# CONFIG_USB_PRINTER is not set
+-# CONFIG_USB_WDM is not set
++CONFIG_USB_ACM=m
++CONFIG_USB_PRINTER=m
++CONFIG_USB_WDM=m
++CONFIG_USB_TMC=m
+ 
+ #
+-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+ #
+ 
+ #
+-# may also be needed; see USB_STORAGE Help for more information
++# also be needed; see USB_STORAGE Help for more info
+ #
+-# CONFIG_USB_STORAGE is not set
++CONFIG_USB_STORAGE=y
++# CONFIG_USB_STORAGE_DEBUG is not set
++# CONFIG_USB_STORAGE_DATAFAB is not set
++# CONFIG_USB_STORAGE_FREECOM is not set
++# CONFIG_USB_STORAGE_ISD200 is not set
++# CONFIG_USB_STORAGE_USBAT is not set
++# CONFIG_USB_STORAGE_SDDR09 is not set
++# CONFIG_USB_STORAGE_SDDR55 is not set
++# CONFIG_USB_STORAGE_JUMPSHOT is not set
++# CONFIG_USB_STORAGE_ALAUDA is not set
++# CONFIG_USB_STORAGE_ONETOUCH is not set
++# CONFIG_USB_STORAGE_KARMA is not set
++# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+ # CONFIG_USB_LIBUSUAL is not set
+ 
+ #
+@@ -911,92 +2235,200 @@ CONFIG_USB_INVENTRA_DMA=y
+ #
+ # USB port drivers
+ #
+-# CONFIG_USB_SERIAL is not set
++CONFIG_USB_SERIAL=m
++CONFIG_USB_EZUSB=y
++CONFIG_USB_SERIAL_GENERIC=y
++CONFIG_USB_SERIAL_AIRCABLE=m
++CONFIG_USB_SERIAL_ARK3116=m
++CONFIG_USB_SERIAL_BELKIN=m
++CONFIG_USB_SERIAL_CH341=m
++CONFIG_USB_SERIAL_WHITEHEAT=m
++CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
++# CONFIG_USB_SERIAL_CP210X is not set
++CONFIG_USB_SERIAL_CYPRESS_M8=m
++CONFIG_USB_SERIAL_EMPEG=m
++CONFIG_USB_SERIAL_FTDI_SIO=m
++CONFIG_USB_SERIAL_FUNSOFT=m
++CONFIG_USB_SERIAL_VISOR=m
++CONFIG_USB_SERIAL_IPAQ=m
++CONFIG_USB_SERIAL_IR=m
++CONFIG_USB_SERIAL_EDGEPORT=m
++CONFIG_USB_SERIAL_EDGEPORT_TI=m
++CONFIG_USB_SERIAL_GARMIN=m
++CONFIG_USB_SERIAL_IPW=m
++CONFIG_USB_SERIAL_IUU=m
++CONFIG_USB_SERIAL_KEYSPAN_PDA=m
++CONFIG_USB_SERIAL_KEYSPAN=m
++CONFIG_USB_SERIAL_KEYSPAN_MPR=y
++CONFIG_USB_SERIAL_KEYSPAN_USA28=y
++CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
++CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
++CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
++CONFIG_USB_SERIAL_KEYSPAN_USA19=y
++CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
++CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
++CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
++CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
++CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
++CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
++CONFIG_USB_SERIAL_KLSI=m
++CONFIG_USB_SERIAL_KOBIL_SCT=m
++CONFIG_USB_SERIAL_MCT_U232=m
++CONFIG_USB_SERIAL_MOS7720=m
++CONFIG_USB_SERIAL_MOS7840=m
++CONFIG_USB_SERIAL_MOTOROLA=m
++CONFIG_USB_SERIAL_NAVMAN=m
++CONFIG_USB_SERIAL_PL2303=m
++CONFIG_USB_SERIAL_OTI6858=m
++# CONFIG_USB_SERIAL_QUALCOMM is not set
++CONFIG_USB_SERIAL_SPCP8X5=m
++CONFIG_USB_SERIAL_HP4X=m
++CONFIG_USB_SERIAL_SAFE=m
++# CONFIG_USB_SERIAL_SAFE_PADDED is not set
++CONFIG_USB_SERIAL_SIEMENS_MPI=m
++CONFIG_USB_SERIAL_SIERRAWIRELESS=m
++# CONFIG_USB_SERIAL_SYMBOL is not set
++CONFIG_USB_SERIAL_TI=m
++CONFIG_USB_SERIAL_CYBERJACK=m
++CONFIG_USB_SERIAL_XIRCOM=m
++CONFIG_USB_SERIAL_OPTION=m
++CONFIG_USB_SERIAL_OMNINET=m
++CONFIG_USB_SERIAL_OPTICON=m
++CONFIG_USB_SERIAL_DEBUG=m
+ 
+ #
+ # USB Miscellaneous drivers
+ #
+-# CONFIG_USB_EMI62 is not set
+-# CONFIG_USB_EMI26 is not set
++CONFIG_USB_EMI62=m
++CONFIG_USB_EMI26=m
+ # CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_SEVSEG is not set
+ # CONFIG_USB_RIO500 is not set
+-# CONFIG_USB_LEGOTOWER is not set
+-# CONFIG_USB_LCD is not set
+-# CONFIG_USB_BERRY_CHARGE is not set
+-# CONFIG_USB_LED is not set
+-# CONFIG_USB_CYPRESS_CY7C63 is not set
+-# CONFIG_USB_CYTHERM is not set
+-# CONFIG_USB_PHIDGET is not set
+-# CONFIG_USB_IDMOUSE is not set
+-# CONFIG_USB_FTDI_ELAN is not set
++CONFIG_USB_LEGOTOWER=m
++CONFIG_USB_LCD=m
++CONFIG_USB_BERRY_CHARGE=m
++CONFIG_USB_LED=m
++CONFIG_USB_CYPRESS_CY7C63=m
++CONFIG_USB_CYTHERM=m
++CONFIG_USB_IDMOUSE=m
++CONFIG_USB_FTDI_ELAN=m
+ # CONFIG_USB_APPLEDISPLAY is not set
+-# CONFIG_USB_LD is not set
+-# CONFIG_USB_TRANCEVIBRATOR is not set
++CONFIG_USB_SISUSBVGA=m
++CONFIG_USB_SISUSBVGA_CON=y
++CONFIG_USB_LD=m
++CONFIG_USB_TRANCEVIBRATOR=m
+ # CONFIG_USB_IOWARRIOR is not set
+-# CONFIG_USB_TEST is not set
++CONFIG_USB_TEST=m
+ # CONFIG_USB_ISIGHTFW is not set
++CONFIG_USB_VST=m
++CONFIG_USB_ATM=m
++CONFIG_USB_SPEEDTOUCH=m
++CONFIG_USB_CXACRU=m
++CONFIG_USB_UEAGLEATM=m
++CONFIG_USB_XUSBATM=m
+ CONFIG_USB_GADGET=y
+ # CONFIG_USB_GADGET_DEBUG is not set
+ # CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_DEBUG_FS=y
++CONFIG_USB_GADGET_VBUS_DRAW=2
+ CONFIG_USB_GADGET_SELECTED=y
+-# CONFIG_USB_GADGET_AMD5536UDC is not set
++# CONFIG_USB_GADGET_AT91 is not set
+ # CONFIG_USB_GADGET_ATMEL_USBA is not set
+ # CONFIG_USB_GADGET_FSL_USB2 is not set
+-# CONFIG_USB_GADGET_NET2280 is not set
+-# CONFIG_USB_GADGET_PXA25X is not set
+-# CONFIG_USB_GADGET_M66592 is not set
+-# CONFIG_USB_M66592 is not set
+-# CONFIG_USB_GADGET_PXA27X is not set
+-# CONFIG_USB_GADGET_GOKU is not set
+ # CONFIG_USB_GADGET_LH7A40X is not set
+ # CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_PXA25X is not set
++# CONFIG_USB_GADGET_R8A66597 is not set
++# CONFIG_USB_GADGET_PXA27X is not set
++# CONFIG_USB_GADGET_S3C_HSOTG is not set
++# CONFIG_USB_GADGET_IMX is not set
+ # CONFIG_USB_GADGET_S3C2410 is not set
+-# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++# CONFIG_USB_GADGET_FSL_QE is not set
++# CONFIG_USB_GADGET_CI13XXX is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LANGWELL is not set
+ # CONFIG_USB_GADGET_DUMMY_HCD is not set
+ CONFIG_USB_GADGET_DUALSPEED=y
+-# CONFIG_USB_ZERO is not set
++CONFIG_USB_ZERO=m
++CONFIG_USB_ZERO_HNPTEST=y
++# CONFIG_USB_AUDIO is not set
+ CONFIG_USB_ETH=m
+ CONFIG_USB_ETH_RNDIS=y
+-# CONFIG_USB_GADGETFS is not set
+-# CONFIG_USB_FILE_STORAGE is not set
+-# CONFIG_USB_G_SERIAL is not set
+-# CONFIG_USB_MIDI_GADGET is not set
+-# CONFIG_USB_G_PRINTER is not set
+-# CONFIG_USB_CDC_COMPOSITE is not set
++# CONFIG_USB_ETH_EEM is not set
++CONFIG_USB_GADGETFS=m
++CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++# CONFIG_USB_MASS_STORAGE is not set
++CONFIG_USB_G_SERIAL=m
++CONFIG_USB_MIDI_GADGET=m
++CONFIG_USB_G_PRINTER=m
++CONFIG_USB_CDC_COMPOSITE=m
++# CONFIG_USB_G_MULTI is not set
+ 
+ #
+ # OTG and related infrastructure
+ #
+ CONFIG_USB_OTG_UTILS=y
+-# CONFIG_USB_GPIO_VBUS is not set
++CONFIG_USB_GPIO_VBUS=y
++# CONFIG_ISP1301_OMAP is not set
++# CONFIG_USB_ULPI is not set
+ CONFIG_TWL4030_USB=y
+-# CONFIG_NOP_USB_XCEIV is not set
++CONFIG_NOP_USB_XCEIV=y
+ CONFIG_MMC=y
+ # CONFIG_MMC_DEBUG is not set
+-# CONFIG_MMC_UNSAFE_RESUME is not set
++CONFIG_MMC_UNSAFE_RESUME=y
+ 
+ #
+-# MMC/SD Card Drivers
++# MMC/SD/SDIO Card Drivers
+ #
+ CONFIG_MMC_BLOCK=y
+ CONFIG_MMC_BLOCK_BOUNCE=y
+-# CONFIG_SDIO_UART is not set
++CONFIG_SDIO_UART=y
+ # CONFIG_MMC_TEST is not set
+ 
+ #
+-# MMC/SD Host Controller Drivers
++# MMC/SD/SDIO Host Controller Drivers
+ #
+ # CONFIG_MMC_SDHCI is not set
+ # CONFIG_MMC_OMAP is not set
+ CONFIG_MMC_OMAP_HS=y
++# CONFIG_MMC_AT91 is not set
++# CONFIG_MMC_ATMELMCI is not set
++CONFIG_MMC_SPI=m
+ # CONFIG_MEMSTICK is not set
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=y
++
++#
++# LED drivers
++#
++# CONFIG_LEDS_PCA9532 is not set
++CONFIG_LEDS_GPIO=y
++CONFIG_LEDS_GPIO_PLATFORM=y
++# CONFIG_LEDS_LP3944 is not set
++# CONFIG_LEDS_PCA955X is not set
++# CONFIG_LEDS_DAC124S085 is not set
++# CONFIG_LEDS_BD2802 is not set
++
++#
++# LED Triggers
++#
++CONFIG_LEDS_TRIGGERS=y
++CONFIG_LEDS_TRIGGER_TIMER=m
++CONFIG_LEDS_TRIGGER_HEARTBEAT=y
++CONFIG_LEDS_TRIGGER_BACKLIGHT=m
++# CONFIG_LEDS_TRIGGER_GPIO is not set
++CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
++
++#
++# iptables trigger is under Netfilter config (LED target)
++#
+ # CONFIG_ACCESSIBILITY is not set
+-# CONFIG_NEW_LEDS is not set
+ CONFIG_RTC_LIB=y
+-CONFIG_RTC_CLASS=y
+-CONFIG_RTC_HCTOSYS=y
+-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+-# CONFIG_RTC_DEBUG is not set
++CONFIG_RTC_CLASS=m
+ 
+ #
+ # RTC interfaces
+@@ -1020,73 +2452,178 @@ CONFIG_RTC_INTF_DEV=y
+ # CONFIG_RTC_DRV_PCF8563 is not set
+ # CONFIG_RTC_DRV_PCF8583 is not set
+ # CONFIG_RTC_DRV_M41T80 is not set
++CONFIG_RTC_DRV_TWL4030=m
+ # CONFIG_RTC_DRV_S35390A is not set
+ # CONFIG_RTC_DRV_FM3130 is not set
++# CONFIG_RTC_DRV_RX8581 is not set
++# CONFIG_RTC_DRV_RX8025 is not set
+ 
+ #
+ # SPI RTC drivers
+ #
++# CONFIG_RTC_DRV_M41T94 is not set
++# CONFIG_RTC_DRV_DS1305 is not set
++# CONFIG_RTC_DRV_DS1390 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++# CONFIG_RTC_DRV_R9701 is not set
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_DS3234 is not set
++# CONFIG_RTC_DRV_PCF2123 is not set
+ 
+ #
+ # Platform RTC drivers
+ #
+ # CONFIG_RTC_DRV_CMOS is not set
++# CONFIG_RTC_DRV_DS1286 is not set
+ # CONFIG_RTC_DRV_DS1511 is not set
+ # CONFIG_RTC_DRV_DS1553 is not set
+ # CONFIG_RTC_DRV_DS1742 is not set
+ # CONFIG_RTC_DRV_STK17TA8 is not set
+ # CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T35 is not set
+ # CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_MSM6242 is not set
++# CONFIG_RTC_DRV_BQ4802 is not set
++# CONFIG_RTC_DRV_RP5C01 is not set
+ # CONFIG_RTC_DRV_V3020 is not set
+ 
+ #
+ # on-CPU RTC drivers
+ #
+ # CONFIG_DMADEVICES is not set
++# CONFIG_AUXDISPLAY is not set
++CONFIG_UIO=m
++CONFIG_UIO_PDRV=m
++CONFIG_UIO_PDRV_GENIRQ=m
++# CONFIG_UIO_SMX is not set
++# CONFIG_UIO_SERCOS3 is not set
+ 
+ #
+-# Voltage and Current regulators
++# TI VLYNQ
+ #
+-CONFIG_REGULATOR=y
+-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+-# CONFIG_REGULATOR_BQ24022 is not set
+-CONFIG_REGULATOR_TWL4030=y
+-# CONFIG_UIO is not set
++CONFIG_STAGING=y
++# CONFIG_STAGING_EXCLUDE_BUILD is not set
++# CONFIG_USB_IP_COMMON is not set
++CONFIG_W35UND=m
++# CONFIG_PRISM2_USB is not set
++CONFIG_ECHO=m
++CONFIG_OTUS=m
++# CONFIG_COMEDI is not set
++# CONFIG_ASUS_OLED is not set
++# CONFIG_INPUT_MIMIO is not set
++# CONFIG_TRANZPORT is not set
++
++#
++# Qualcomm MSM Camera And Video
++#
++
++#
++# Camera Sensor Selection
++#
++# CONFIG_INPUT_GPIO is not set
++# CONFIG_DST is not set
++# CONFIG_POHMELFS is not set
++# CONFIG_PLAN9AUTH is not set
++# CONFIG_LINE6_USB is not set
++# CONFIG_USB_SERIAL_QUATECH2 is not set
++# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
++# CONFIG_VT6656 is not set
++# CONFIG_FB_UDL is not set
++
++#
++# RAR Register Driver
++#
++# CONFIG_RAR_REGISTER is not set
++# CONFIG_IIO is not set
++# CONFIG_RAMZSWAP is not set
++# CONFIG_BATMAN_ADV is not set
++# CONFIG_STRIP is not set
++
++#
++# CBUS support
++#
++# CONFIG_CBUS is not set
+ 
+ #
+ # File systems
+ #
++CONFIG_FS_JOURNAL_INFO=y
+ CONFIG_EXT2_FS=y
+ # CONFIG_EXT2_FS_XATTR is not set
+ # CONFIG_EXT2_FS_XIP is not set
+ CONFIG_EXT3_FS=y
++# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+ # CONFIG_EXT3_FS_XATTR is not set
+-# CONFIG_EXT4DEV_FS is not set
++CONFIG_EXT4_FS=y
++CONFIG_EXT4_FS_XATTR=y
++# CONFIG_EXT4_FS_POSIX_ACL is not set
++# CONFIG_EXT4_FS_SECURITY is not set
++# CONFIG_EXT4_DEBUG is not set
+ CONFIG_JBD=y
+-# CONFIG_REISERFS_FS is not set
+-# CONFIG_JFS_FS is not set
+-# CONFIG_FS_POSIX_ACL is not set
+-# CONFIG_XFS_FS is not set
+-# CONFIG_OCFS2_FS is not set
++# CONFIG_JBD_DEBUG is not set
++CONFIG_JBD2=y
++# CONFIG_JBD2_DEBUG is not set
++CONFIG_FS_MBCACHE=y
++CONFIG_REISERFS_FS=m
++# CONFIG_REISERFS_CHECK is not set
++CONFIG_REISERFS_PROC_INFO=y
++CONFIG_REISERFS_FS_XATTR=y
++# CONFIG_REISERFS_FS_POSIX_ACL is not set
++# CONFIG_REISERFS_FS_SECURITY is not set
++CONFIG_JFS_FS=m
++# CONFIG_JFS_POSIX_ACL is not set
++# CONFIG_JFS_SECURITY is not set
++# CONFIG_JFS_DEBUG is not set
++# CONFIG_JFS_STATISTICS is not set
++CONFIG_FS_POSIX_ACL=y
++CONFIG_XFS_FS=m
++# CONFIG_XFS_QUOTA is not set
++# CONFIG_XFS_POSIX_ACL is not set
++# CONFIG_XFS_RT is not set
++# CONFIG_XFS_DEBUG is not set
++CONFIG_GFS2_FS=m
++# CONFIG_GFS2_FS_LOCKING_DLM is not set
++CONFIG_OCFS2_FS=m
++CONFIG_OCFS2_FS_O2CB=m
++CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
++CONFIG_OCFS2_FS_STATS=y
++CONFIG_OCFS2_DEBUG_MASKLOG=y
++# CONFIG_OCFS2_DEBUG_FS is not set
++# CONFIG_OCFS2_FS_POSIX_ACL is not set
++CONFIG_BTRFS_FS=m
++# CONFIG_BTRFS_FS_POSIX_ACL is not set
++# CONFIG_NILFS2_FS is not set
++CONFIG_FILE_LOCKING=y
++CONFIG_FSNOTIFY=y
+ CONFIG_DNOTIFY=y
+ CONFIG_INOTIFY=y
+ CONFIG_INOTIFY_USER=y
+ CONFIG_QUOTA=y
+ # CONFIG_QUOTA_NETLINK_INTERFACE is not set
+ CONFIG_PRINT_QUOTA_WARNING=y
++CONFIG_QUOTA_TREE=y
+ # CONFIG_QFMT_V1 is not set
+ CONFIG_QFMT_V2=y
+ CONFIG_QUOTACTL=y
+ # CONFIG_AUTOFS_FS is not set
+-# CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
++CONFIG_AUTOFS4_FS=m
++CONFIG_FUSE_FS=m
++# CONFIG_CUSE is not set
++CONFIG_GENERIC_ACL=y
++
++#
++# Caches
++#
++# CONFIG_FSCACHE is not set
+ 
+ #
+ # CD-ROM/DVD Filesystems
+ #
+-# CONFIG_ISO9660_FS is not set
+-# CONFIG_UDF_FS is not set
++CONFIG_ISO9660_FS=m
++CONFIG_JOLIET=y
++CONFIG_ZISOFS=y
++CONFIG_UDF_FS=m
++CONFIG_UDF_NLS=y
+ 
+ #
+ # DOS/FAT/NT Filesystems
+@@ -1096,68 +2633,118 @@ CONFIG_MSDOS_FS=y
+ CONFIG_VFAT_FS=y
+ CONFIG_FAT_DEFAULT_CODEPAGE=437
+ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+-# CONFIG_NTFS_FS is not set
++CONFIG_NTFS_FS=m
++# CONFIG_NTFS_DEBUG is not set
++CONFIG_NTFS_RW=y
+ 
+ #
+ # Pseudo filesystems
+ #
+ CONFIG_PROC_FS=y
+ CONFIG_PROC_SYSCTL=y
++CONFIG_PROC_PAGE_MONITOR=y
+ CONFIG_SYSFS=y
+ CONFIG_TMPFS=y
+-# CONFIG_TMPFS_POSIX_ACL is not set
++CONFIG_TMPFS_POSIX_ACL=y
+ # CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
+-
+-#
+-# Miscellaneous filesystems
+-#
+-# CONFIG_ADFS_FS is not set
+-# CONFIG_AFFS_FS is not set
+-# CONFIG_HFS_FS is not set
+-# CONFIG_HFSPLUS_FS is not set
+-# CONFIG_BEFS_FS is not set
+-# CONFIG_BFS_FS is not set
+-# CONFIG_EFS_FS is not set
++CONFIG_CONFIGFS_FS=m
++CONFIG_MISC_FILESYSTEMS=y
++CONFIG_ADFS_FS=m
++# CONFIG_ADFS_FS_RW is not set
++CONFIG_AFFS_FS=m
++# CONFIG_ECRYPT_FS is not set
++CONFIG_HFS_FS=m
++CONFIG_HFSPLUS_FS=m
++CONFIG_BEFS_FS=m
++# CONFIG_BEFS_DEBUG is not set
++CONFIG_BFS_FS=m
++CONFIG_EFS_FS=m
+ CONFIG_JFFS2_FS=y
+ CONFIG_JFFS2_FS_DEBUG=0
+ CONFIG_JFFS2_FS_WRITEBUFFER=y
+ # CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+-# CONFIG_JFFS2_SUMMARY is not set
+-# CONFIG_JFFS2_FS_XATTR is not set
+-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_SUMMARY=y
++CONFIG_JFFS2_FS_XATTR=y
++CONFIG_JFFS2_FS_POSIX_ACL=y
++CONFIG_JFFS2_FS_SECURITY=y
++CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+ CONFIG_JFFS2_ZLIB=y
+-# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_LZO=y
+ CONFIG_JFFS2_RTIME=y
+-# CONFIG_JFFS2_RUBIN is not set
+-# CONFIG_CRAMFS is not set
+-# CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_OMFS_FS is not set
+-# CONFIG_HPFS_FS is not set
+-# CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+-# CONFIG_SYSV_FS is not set
+-# CONFIG_UFS_FS is not set
++CONFIG_JFFS2_RUBIN=y
++# CONFIG_JFFS2_CMODE_NONE is not set
++# CONFIG_JFFS2_CMODE_PRIORITY is not set
++# CONFIG_JFFS2_CMODE_SIZE is not set
++CONFIG_JFFS2_CMODE_FAVOURLZO=y
++CONFIG_UBIFS_FS=y
++CONFIG_UBIFS_FS_XATTR=y
++CONFIG_UBIFS_FS_ADVANCED_COMPR=y
++CONFIG_UBIFS_FS_LZO=y
++CONFIG_UBIFS_FS_ZLIB=y
++# CONFIG_UBIFS_FS_DEBUG is not set
++CONFIG_CRAMFS=m
++CONFIG_SQUASHFS=y
++# CONFIG_SQUASHFS_EMBEDDED is not set
++CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
++CONFIG_VXFS_FS=m
++CONFIG_MINIX_FS=m
++CONFIG_OMFS_FS=m
++CONFIG_HPFS_FS=m
++CONFIG_QNX4FS_FS=m
++CONFIG_ROMFS_FS=m
++CONFIG_ROMFS_BACKED_BY_BLOCK=y
++# CONFIG_ROMFS_BACKED_BY_MTD is not set
++# CONFIG_ROMFS_BACKED_BY_BOTH is not set
++CONFIG_ROMFS_ON_BLOCK=y
++CONFIG_SYSV_FS=m
++CONFIG_UFS_FS=m
++# CONFIG_UFS_FS_WRITE is not set
++# CONFIG_UFS_DEBUG is not set
+ CONFIG_NETWORK_FILESYSTEMS=y
+ CONFIG_NFS_FS=y
+ CONFIG_NFS_V3=y
+ # CONFIG_NFS_V3_ACL is not set
+ CONFIG_NFS_V4=y
++# CONFIG_NFS_V4_1 is not set
+ CONFIG_ROOT_NFS=y
+-# CONFIG_NFSD is not set
++CONFIG_NFSD=m
++CONFIG_NFSD_V2_ACL=y
++CONFIG_NFSD_V3=y
++CONFIG_NFSD_V3_ACL=y
++CONFIG_NFSD_V4=y
+ CONFIG_LOCKD=y
+ CONFIG_LOCKD_V4=y
++CONFIG_EXPORTFS=m
++CONFIG_NFS_ACL_SUPPORT=m
+ CONFIG_NFS_COMMON=y
+ CONFIG_SUNRPC=y
+ CONFIG_SUNRPC_GSS=y
+ CONFIG_RPCSEC_GSS_KRB5=y
+ # CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
+-# CONFIG_NCP_FS is not set
+-# CONFIG_CODA_FS is not set
+-# CONFIG_AFS_FS is not set
++CONFIG_SMB_FS=m
++# CONFIG_SMB_NLS_DEFAULT is not set
++CONFIG_CIFS=m
++CONFIG_CIFS_STATS=y
++CONFIG_CIFS_STATS2=y
++# CONFIG_CIFS_WEAK_PW_HASH is not set
++# CONFIG_CIFS_UPCALL is not set
++# CONFIG_CIFS_XATTR is not set
++# CONFIG_CIFS_DEBUG2 is not set
++# CONFIG_CIFS_DFS_UPCALL is not set
++CONFIG_CIFS_EXPERIMENTAL=y
++CONFIG_NCP_FS=m
++# CONFIG_NCPFS_PACKET_SIGNING is not set
++# CONFIG_NCPFS_IOCTL_LOCKING is not set
++# CONFIG_NCPFS_STRONG is not set
++# CONFIG_NCPFS_NFS_NS is not set
++# CONFIG_NCPFS_OS2_NS is not set
++# CONFIG_NCPFS_SMALLDOS is not set
++# CONFIG_NCPFS_NLS is not set
++# CONFIG_NCPFS_EXTRAS is not set
++CONFIG_CODA_FS=m
++CONFIG_AFS_FS=m
++# CONFIG_AFS_DEBUG is not set
++CONFIG_9P_FS=m
+ 
+ #
+ # Partition Types
+@@ -1167,82 +2754,90 @@ CONFIG_PARTITION_ADVANCED=y
+ # CONFIG_OSF_PARTITION is not set
+ # CONFIG_AMIGA_PARTITION is not set
+ # CONFIG_ATARI_PARTITION is not set
+-# CONFIG_MAC_PARTITION is not set
++CONFIG_MAC_PARTITION=y
+ CONFIG_MSDOS_PARTITION=y
+-# CONFIG_BSD_DISKLABEL is not set
+-# CONFIG_MINIX_SUBPARTITION is not set
+-# CONFIG_SOLARIS_X86_PARTITION is not set
++CONFIG_BSD_DISKLABEL=y
++CONFIG_MINIX_SUBPARTITION=y
++CONFIG_SOLARIS_X86_PARTITION=y
+ # CONFIG_UNIXWARE_DISKLABEL is not set
+-# CONFIG_LDM_PARTITION is not set
++CONFIG_LDM_PARTITION=y
++CONFIG_LDM_DEBUG=y
+ # CONFIG_SGI_PARTITION is not set
+ # CONFIG_ULTRIX_PARTITION is not set
+ # CONFIG_SUN_PARTITION is not set
+ # CONFIG_KARMA_PARTITION is not set
+-# CONFIG_EFI_PARTITION is not set
++CONFIG_EFI_PARTITION=y
+ # CONFIG_SYSV68_PARTITION is not set
+ CONFIG_NLS=y
+ CONFIG_NLS_DEFAULT="iso8859-1"
+ CONFIG_NLS_CODEPAGE_437=y
+-# CONFIG_NLS_CODEPAGE_737 is not set
+-# CONFIG_NLS_CODEPAGE_775 is not set
+-# CONFIG_NLS_CODEPAGE_850 is not set
+-# CONFIG_NLS_CODEPAGE_852 is not set
+-# CONFIG_NLS_CODEPAGE_855 is not set
+-# CONFIG_NLS_CODEPAGE_857 is not set
+-# CONFIG_NLS_CODEPAGE_860 is not set
+-# CONFIG_NLS_CODEPAGE_861 is not set
+-# CONFIG_NLS_CODEPAGE_862 is not set
+-# CONFIG_NLS_CODEPAGE_863 is not set
+-# CONFIG_NLS_CODEPAGE_864 is not set
+-# CONFIG_NLS_CODEPAGE_865 is not set
+-# CONFIG_NLS_CODEPAGE_866 is not set
+-# CONFIG_NLS_CODEPAGE_869 is not set
+-# CONFIG_NLS_CODEPAGE_936 is not set
+-# CONFIG_NLS_CODEPAGE_950 is not set
+-# CONFIG_NLS_CODEPAGE_932 is not set
+-# CONFIG_NLS_CODEPAGE_949 is not set
+-# CONFIG_NLS_CODEPAGE_874 is not set
+-# CONFIG_NLS_ISO8859_8 is not set
+-# CONFIG_NLS_CODEPAGE_1250 is not set
+-# CONFIG_NLS_CODEPAGE_1251 is not set
+-# CONFIG_NLS_ASCII is not set
++CONFIG_NLS_CODEPAGE_737=m
++CONFIG_NLS_CODEPAGE_775=m
++CONFIG_NLS_CODEPAGE_850=m
++CONFIG_NLS_CODEPAGE_852=m
++CONFIG_NLS_CODEPAGE_855=m
++CONFIG_NLS_CODEPAGE_857=m
++CONFIG_NLS_CODEPAGE_860=m
++CONFIG_NLS_CODEPAGE_861=m
++CONFIG_NLS_CODEPAGE_862=m
++CONFIG_NLS_CODEPAGE_863=m
++CONFIG_NLS_CODEPAGE_864=m
++CONFIG_NLS_CODEPAGE_865=m
++CONFIG_NLS_CODEPAGE_866=m
++CONFIG_NLS_CODEPAGE_869=m
++CONFIG_NLS_CODEPAGE_936=m
++CONFIG_NLS_CODEPAGE_950=m
++CONFIG_NLS_CODEPAGE_932=m
++CONFIG_NLS_CODEPAGE_949=m
++CONFIG_NLS_CODEPAGE_874=m
++CONFIG_NLS_ISO8859_8=m
++CONFIG_NLS_CODEPAGE_1250=m
++CONFIG_NLS_CODEPAGE_1251=m
++CONFIG_NLS_ASCII=m
+ CONFIG_NLS_ISO8859_1=y
+-# CONFIG_NLS_ISO8859_2 is not set
+-# CONFIG_NLS_ISO8859_3 is not set
+-# CONFIG_NLS_ISO8859_4 is not set
+-# CONFIG_NLS_ISO8859_5 is not set
+-# CONFIG_NLS_ISO8859_6 is not set
+-# CONFIG_NLS_ISO8859_7 is not set
+-# CONFIG_NLS_ISO8859_9 is not set
+-# CONFIG_NLS_ISO8859_13 is not set
+-# CONFIG_NLS_ISO8859_14 is not set
+-# CONFIG_NLS_ISO8859_15 is not set
+-# CONFIG_NLS_KOI8_R is not set
+-# CONFIG_NLS_KOI8_U is not set
+-# CONFIG_NLS_UTF8 is not set
+-# CONFIG_DLM is not set
++CONFIG_NLS_ISO8859_2=m
++CONFIG_NLS_ISO8859_3=m
++CONFIG_NLS_ISO8859_4=m
++CONFIG_NLS_ISO8859_5=m
++CONFIG_NLS_ISO8859_6=m
++CONFIG_NLS_ISO8859_7=m
++CONFIG_NLS_ISO8859_9=m
++CONFIG_NLS_ISO8859_13=m
++CONFIG_NLS_ISO8859_14=m
++CONFIG_NLS_ISO8859_15=m
++CONFIG_NLS_KOI8_R=m
++CONFIG_NLS_KOI8_U=m
++CONFIG_NLS_UTF8=y
++CONFIG_DLM=m
++# CONFIG_DLM_DEBUG is not set
+ 
+ #
+ # Kernel hacking
+ #
+-# CONFIG_PRINTK_TIME is not set
++CONFIG_PRINTK_TIME=y
+ CONFIG_ENABLE_WARN_DEPRECATED=y
+ CONFIG_ENABLE_MUST_CHECK=y
+ CONFIG_FRAME_WARN=1024
+ CONFIG_MAGIC_SYSRQ=y
++# CONFIG_STRIP_ASM_SYMS is not set
+ # CONFIG_UNUSED_SYMBOLS is not set
+-# CONFIG_DEBUG_FS is not set
++CONFIG_DEBUG_FS=y
+ # CONFIG_HEADERS_CHECK is not set
+ CONFIG_DEBUG_KERNEL=y
+ # CONFIG_DEBUG_SHIRQ is not set
+ CONFIG_DETECT_SOFTLOCKUP=y
+ # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+ CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
++CONFIG_DETECT_HUNG_TASK=y
++# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
++CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+ CONFIG_SCHED_DEBUG=y
+-# CONFIG_SCHEDSTATS is not set
+-# CONFIG_TIMER_STATS is not set
++CONFIG_SCHEDSTATS=y
++CONFIG_TIMER_STATS=y
+ # CONFIG_DEBUG_OBJECTS is not set
+ # CONFIG_DEBUG_SLAB is not set
++# CONFIG_DEBUG_KMEMLEAK is not set
++CONFIG_DEBUG_PREEMPT=y
+ # CONFIG_DEBUG_RT_MUTEXES is not set
+ # CONFIG_RT_MUTEX_TESTER is not set
+ # CONFIG_DEBUG_SPINLOCK is not set
+@@ -1252,137 +2847,204 @@ CONFIG_DEBUG_MUTEXES=y
+ # CONFIG_LOCK_STAT is not set
+ # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+ # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++CONFIG_STACKTRACE=y
+ # CONFIG_DEBUG_KOBJECT is not set
+ # CONFIG_DEBUG_BUGVERBOSE is not set
+-CONFIG_DEBUG_INFO=y
++# CONFIG_DEBUG_INFO is not set
+ # CONFIG_DEBUG_VM is not set
+ # CONFIG_DEBUG_WRITECOUNT is not set
+ # CONFIG_DEBUG_MEMORY_INIT is not set
+ # CONFIG_DEBUG_LIST is not set
+ # CONFIG_DEBUG_SG is not set
+-CONFIG_FRAME_POINTER=y
++# CONFIG_DEBUG_NOTIFIERS is not set
++# CONFIG_DEBUG_CREDENTIALS is not set
+ # CONFIG_BOOT_PRINTK_DELAY is not set
+ # CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+ # CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
++# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+ # CONFIG_FAULT_INJECTION is not set
+ # CONFIG_LATENCYTOP is not set
+-CONFIG_HAVE_FTRACE=y
+-CONFIG_HAVE_DYNAMIC_FTRACE=y
+-# CONFIG_FTRACE is not set
++# CONFIG_SYSCTL_SYSCALL_CHECK is not set
++# CONFIG_PAGE_POISONING is not set
++CONFIG_NOP_TRACER=y
++CONFIG_HAVE_FUNCTION_TRACER=y
++CONFIG_RING_BUFFER=y
++CONFIG_EVENT_TRACING=y
++CONFIG_CONTEXT_SWITCH_TRACER=y
++CONFIG_RING_BUFFER_ALLOW_SWAP=y
++CONFIG_TRACING=y
++CONFIG_TRACING_SUPPORT=y
++CONFIG_FTRACE=y
++# CONFIG_FUNCTION_TRACER is not set
+ # CONFIG_IRQSOFF_TRACER is not set
++# CONFIG_PREEMPT_TRACER is not set
+ # CONFIG_SCHED_TRACER is not set
+-# CONFIG_CONTEXT_SWITCH_TRACER is not set
++# CONFIG_ENABLE_DEFAULT_TRACERS is not set
++# CONFIG_BOOT_TRACER is not set
++CONFIG_BRANCH_PROFILE_NONE=y
++# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
++# CONFIG_PROFILE_ALL_BRANCHES is not set
++# CONFIG_STACK_TRACER is not set
++# CONFIG_KMEMTRACE is not set
++# CONFIG_WORKQUEUE_TRACER is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_RING_BUFFER_BENCHMARK is not set
++# CONFIG_DYNAMIC_DEBUG is not set
+ # CONFIG_SAMPLES is not set
+ CONFIG_HAVE_ARCH_KGDB=y
+ # CONFIG_KGDB is not set
++CONFIG_ARM_UNWIND=y
+ # CONFIG_DEBUG_USER is not set
+ # CONFIG_DEBUG_ERRORS is not set
+ # CONFIG_DEBUG_STACK_USAGE is not set
+ # CONFIG_DEBUG_LL is not set
++# CONFIG_OC_ETM is not set
+ 
+ #
+ # Security options
+ #
+-# CONFIG_KEYS is not set
++CONFIG_KEYS=y
++# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+ # CONFIG_SECURITY is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++# CONFIG_SECURITYFS is not set
++# CONFIG_DEFAULT_SECURITY_SELINUX is not set
++# CONFIG_DEFAULT_SECURITY_SMACK is not set
++# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
++CONFIG_DEFAULT_SECURITY_DAC=y
++CONFIG_DEFAULT_SECURITY=""
++CONFIG_XOR_BLOCKS=m
++CONFIG_ASYNC_CORE=m
++CONFIG_ASYNC_MEMCPY=m
++CONFIG_ASYNC_XOR=m
++CONFIG_ASYNC_PQ=m
++CONFIG_ASYNC_RAID6_RECOV=m
+ CONFIG_CRYPTO=y
+ 
+ #
+ # Crypto core or helper
+ #
++CONFIG_CRYPTO_FIPS=y
+ CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_ALGAPI2=y
++CONFIG_CRYPTO_AEAD=m
++CONFIG_CRYPTO_AEAD2=y
+ CONFIG_CRYPTO_BLKCIPHER=y
++CONFIG_CRYPTO_BLKCIPHER2=y
++CONFIG_CRYPTO_HASH=y
++CONFIG_CRYPTO_HASH2=y
++CONFIG_CRYPTO_RNG=m
++CONFIG_CRYPTO_RNG2=y
++CONFIG_CRYPTO_PCOMP=y
+ CONFIG_CRYPTO_MANAGER=y
+-# CONFIG_CRYPTO_GF128MUL is not set
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-# CONFIG_CRYPTO_TEST is not set
++CONFIG_CRYPTO_MANAGER2=y
++CONFIG_CRYPTO_GF128MUL=m
++CONFIG_CRYPTO_NULL=m
++CONFIG_CRYPTO_WORKQUEUE=y
++CONFIG_CRYPTO_CRYPTD=m
++CONFIG_CRYPTO_AUTHENC=m
++CONFIG_CRYPTO_TEST=m
+ 
+ #
+ # Authenticated Encryption with Associated Data
+ #
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_SEQIV is not set
++CONFIG_CRYPTO_CCM=m
++CONFIG_CRYPTO_GCM=m
++CONFIG_CRYPTO_SEQIV=m
+ 
+ #
+ # Block modes
+ #
+ CONFIG_CRYPTO_CBC=y
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_CTS is not set
+-CONFIG_CRYPTO_ECB=m
+-# CONFIG_CRYPTO_LRW is not set
++CONFIG_CRYPTO_CTR=m
++CONFIG_CRYPTO_CTS=m
++CONFIG_CRYPTO_ECB=y
++CONFIG_CRYPTO_LRW=m
+ CONFIG_CRYPTO_PCBC=m
+-# CONFIG_CRYPTO_XTS is not set
++CONFIG_CRYPTO_XTS=m
+ 
+ #
+ # Hash modes
+ #
+-# CONFIG_CRYPTO_HMAC is not set
+-# CONFIG_CRYPTO_XCBC is not set
++CONFIG_CRYPTO_HMAC=m
++CONFIG_CRYPTO_XCBC=m
++# CONFIG_CRYPTO_VMAC is not set
+ 
+ #
+ # Digest
+ #
+-# CONFIG_CRYPTO_CRC32C is not set
+-# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_CRC32C=y
++CONFIG_CRYPTO_GHASH=m
++CONFIG_CRYPTO_MD4=m
+ CONFIG_CRYPTO_MD5=y
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_RMD128 is not set
+-# CONFIG_CRYPTO_RMD160 is not set
+-# CONFIG_CRYPTO_RMD256 is not set
+-# CONFIG_CRYPTO_RMD320 is not set
+-# CONFIG_CRYPTO_SHA1 is not set
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-# CONFIG_CRYPTO_WP512 is not set
++CONFIG_CRYPTO_MICHAEL_MIC=y
++CONFIG_CRYPTO_RMD128=m
++CONFIG_CRYPTO_RMD160=m
++CONFIG_CRYPTO_RMD256=m
++CONFIG_CRYPTO_RMD320=m
++CONFIG_CRYPTO_SHA1=m
++CONFIG_CRYPTO_SHA256=m
++CONFIG_CRYPTO_SHA512=m
++CONFIG_CRYPTO_TGR192=m
++CONFIG_CRYPTO_WP512=m
+ 
+ #
+ # Ciphers
+ #
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
++CONFIG_CRYPTO_AES=y
++CONFIG_CRYPTO_ANUBIS=m
++CONFIG_CRYPTO_ARC4=y
++CONFIG_CRYPTO_BLOWFISH=m
++CONFIG_CRYPTO_CAMELLIA=m
++CONFIG_CRYPTO_CAST5=m
++CONFIG_CRYPTO_CAST6=m
+ CONFIG_CRYPTO_DES=y
+-# CONFIG_CRYPTO_FCRYPT is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
+-# CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
++CONFIG_CRYPTO_FCRYPT=m
++CONFIG_CRYPTO_KHAZAD=m
++CONFIG_CRYPTO_SALSA20=m
++CONFIG_CRYPTO_SEED=m
++CONFIG_CRYPTO_SERPENT=m
++CONFIG_CRYPTO_TEA=m
++CONFIG_CRYPTO_TWOFISH=m
++CONFIG_CRYPTO_TWOFISH_COMMON=m
+ 
+ #
+ # Compression
+ #
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_DEFLATE=y
++# CONFIG_CRYPTO_ZLIB is not set
++CONFIG_CRYPTO_LZO=y
++
++#
++# Random Number Generation
++#
++CONFIG_CRYPTO_ANSI_CPRNG=m
+ CONFIG_CRYPTO_HW=y
++CONFIG_BINARY_PRINTF=y
+ 
+ #
+ # Library routines
+ #
+ CONFIG_BITREVERSE=y
+-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
++CONFIG_GENERIC_FIND_LAST_BIT=y
+ CONFIG_CRC_CCITT=y
+-# CONFIG_CRC16 is not set
+-# CONFIG_CRC_T10DIF is not set
+-# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC16=y
++CONFIG_CRC_T10DIF=y
++CONFIG_CRC_ITU_T=y
+ CONFIG_CRC32=y
+-# CONFIG_CRC7 is not set
++CONFIG_CRC7=y
+ CONFIG_LIBCRC32C=y
+ CONFIG_ZLIB_INFLATE=y
+ CONFIG_ZLIB_DEFLATE=y
+-CONFIG_PLIST=y
++CONFIG_LZO_COMPRESS=y
++CONFIG_LZO_DECOMPRESS=y
++CONFIG_DECOMPRESS_GZIP=y
++CONFIG_TEXTSEARCH=y
++CONFIG_TEXTSEARCH_KMP=m
++CONFIG_TEXTSEARCH_BM=m
++CONFIG_TEXTSEARCH_FSM=m
+ CONFIG_HAS_IOMEM=y
+ CONFIG_HAS_IOPORT=y
+ CONFIG_HAS_DMA=y
++CONFIG_NLATTR=y
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0011-ASoC-enable-audio-capture-by-default-for-twl4030.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0011-ASoC-enable-audio-capture-by-default-for-twl4030.patch
new file mode 100644
index 0000000..75cbf5c
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0011-ASoC-enable-audio-capture-by-default-for-twl4030.patch
@@ -0,0 +1,27 @@
+From d9b1154227bf4fde9b08d3d5d427ef6e56e9cae1 Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Thu, 17 Dec 2009 12:45:20 -0800
+Subject: [PATCH 11/45] ASoC: enable audio capture by default for twl4030
+
+---
+ sound/soc/codecs/twl4030.c |    4 ++--
+ 1 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c
+index 74f0d65..53da465 100644
+--- a/sound/soc/codecs/twl4030.c
++++ b/sound/soc/codecs/twl4030.c
+@@ -46,8 +46,8 @@ static const u8 twl4030_reg[TWL4030_CACHEREGNUM] = {
+ 	0xc3, /* REG_OPTION		(0x2)	*/
+ 	0x00, /* REG_UNKNOWN		(0x3)	*/
+ 	0x00, /* REG_MICBIAS_CTL	(0x4)	*/
+-	0x20, /* REG_ANAMICL		(0x5)	*/
+-	0x00, /* REG_ANAMICR		(0x6)	*/
++	0x34, /* REG_ANAMICL		(0x5)	*/
++	0x14, /* REG_ANAMICR		(0x6)	*/
+ 	0x00, /* REG_AVADC_CTL		(0x7)	*/
+ 	0x00, /* REG_ADCMICSEL		(0x8)	*/
+ 	0x00, /* REG_DIGMIXING		(0x9)	*/
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0012-MTD-NAND-omap2-proper-fix-for-subpage-read-ECC-error.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0012-MTD-NAND-omap2-proper-fix-for-subpage-read-ECC-error.patch
new file mode 100644
index 0000000..0c75a14
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0012-MTD-NAND-omap2-proper-fix-for-subpage-read-ECC-error.patch
@@ -0,0 +1,35 @@
+From 20276b3c5eb8dabc7169aee30ad38f9308a0572f Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Thu, 31 Dec 2009 07:05:02 -0800
+Subject: [PATCH 12/45] MTD: NAND: omap2: proper fix for subpage read ECC errors
+
+---
+ drivers/mtd/nand/omap2.c |   11 +++++++----
+ 1 files changed, 7 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
+index 08c193c..9b185b0 100644
+--- a/drivers/mtd/nand/omap2.c
++++ b/drivers/mtd/nand/omap2.c
+@@ -295,11 +295,14 @@ static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len)
+ 	u32 *p = (u32 *)buf;
+ 
+ 	/* take care of subpage reads */
+-	for (; len % 4 != 0; ) {
+-		*buf++ = __raw_readb(info->nand.IO_ADDR_R);
+-		len--;
++	if (len % 4) {
++		if (info->nand.options & NAND_BUSWIDTH_16)
++			omap_read_buf16(mtd, buf, len % 4);
++		else
++			omap_read_buf8(mtd, buf, len % 4);
++		p = (u32 *) (buf + len % 4);
++		len -= len % 4;
+ 	}
+-	p = (u32 *) buf;
+ 
+ 	/* configure and start prefetch transfer */
+ 	ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x0);
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0013-OMAP3630-DSS2-Enable-Pre-Multiplied-Alpha-Support.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0013-OMAP3630-DSS2-Enable-Pre-Multiplied-Alpha-Support.patch
new file mode 100644
index 0000000..f89d8cb
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0013-OMAP3630-DSS2-Enable-Pre-Multiplied-Alpha-Support.patch
@@ -0,0 +1,44 @@
+From 37bcddac7dbfe61576489e4c55b32d8b45eb1c5a Mon Sep 17 00:00:00 2001
+From: Sudeep Basavaraj <sudeep.basavaraj@ti.com>
+Date: Tue, 5 Jan 2010 18:58:18 +0530
+Subject: [PATCH 13/45] OMAP3630:DSS2:Enable Pre-Multiplied Alpha Support
+
+Enables dss to process color formats with pre-mulitplied alpha values.
+With this we can have alpha values defined for each pixel
+and hence can have different blending values for each pixel.
+
+Signed-off-by: Sudeep Basavaraj <sudeep.basavaraj@ti.com>
+Signed-off-by: Kishore Y <kishore.y@ti.com>
+---
+ drivers/video/omap2/dss/dispc.c |    8 ++++++++
+ 1 files changed, 8 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
+index f7acf87..c6d5fc5 100644
+--- a/drivers/video/omap2/dss/dispc.c
++++ b/drivers/video/omap2/dss/dispc.c
+@@ -913,6 +913,11 @@ static void _dispc_set_vid_color_conv(enum omap_plane plane, bool enable)
+ 	dispc_write_reg(dispc_reg_att[plane], val);
+ }
+ 
++static void _dispc_set_alpha_blend_attrs(enum omap_plane plane, bool enable)
++{
++	REG_FLD_MOD(dispc_reg_att[plane], enable ? 1 : 0, 28, 28);
++}
++
+ void dispc_enable_replication(enum omap_plane plane, bool enable)
+ {
+ 	int bit;
+@@ -1689,6 +1694,9 @@ static int _dispc_setup_plane(enum omap_plane plane,
+ 
+ 	_dispc_set_rotation_attrs(plane, rotation, mirror, color_mode);
+ 
++	if (cpu_is_omap3630() && (plane != OMAP_DSS_VIDEO1))
++		_dispc_set_alpha_blend_attrs(plane, 1);
++
+ 	if (plane != OMAP_DSS_VIDEO1)
+ 		_dispc_setup_global_alpha(plane, global_alpha);
+ 
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0014-DSS2-add-bootarg-for-selecting-svideo-or-composite-f.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0014-DSS2-add-bootarg-for-selecting-svideo-or-composite-f.patch
new file mode 100644
index 0000000..0f69e58
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0014-DSS2-add-bootarg-for-selecting-svideo-or-composite-f.patch
@@ -0,0 +1,75 @@
+From d03b9f3dc00274820bed99cc22d8425d6bf0e7b4 Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Tue, 19 Jan 2010 21:19:15 -0800
+Subject: [PATCH 14/45] DSS2: add bootarg for selecting svideo or composite for tv output
+
+also add pal-16 and ntsc-16 omapfb.mode settings for 16bpp
+---
+ drivers/video/omap2/dss/venc.c           |   22 ++++++++++++++++++++++
+ drivers/video/omap2/omapfb/omapfb-main.c |   10 +++++++++-
+ 2 files changed, 31 insertions(+), 1 deletions(-)
+
+diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
+index 1127e85..53fa54e 100644
+--- a/drivers/video/omap2/dss/venc.c
++++ b/drivers/video/omap2/dss/venc.c
+@@ -87,6 +87,11 @@
+ #define VENC_OUTPUT_TEST			0xC8
+ #define VENC_DAC_B__DAC_C			0xC8
+ 
++static char *tv_connection;
++
++module_param_named(tvcable, tv_connection, charp, 0);
++MODULE_PARM_DESC(tvcable, "TV connection type (svideo, composite)");
++
+ struct venc_config {
+ 	u32 f_control;
+ 	u32 vidout_ctrl;
+@@ -430,6 +435,23 @@ static int venc_panel_probe(struct omap_dss_device *dssdev)
+ {
+ 	dssdev->panel.timings = omap_dss_pal_timings;
+ 
++	/* Allow the TV output to be overriden */
++	if (tv_connection) {
++		if (strcmp(tv_connection, "svideo") == 0) {
++			printk(KERN_INFO
++				"omapdss: tv output is svideo.\n");
++			dssdev->phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO;
++		} else if (strcmp(tv_connection, "composite") == 0) {
++			printk(KERN_INFO
++				"omapdss: tv output is composite.\n");
++			dssdev->phy.venc.type = OMAP_DSS_VENC_TYPE_COMPOSITE;
++		} else {
++			printk(KERN_INFO
++				"omapdss: unsupported output type'%s'.\n",
++				tv_connection);
++		}
++	}
++
+ 	return 0;
+ }
+ 
+diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
+index 7f47a34..0fe87e0 100644
+--- a/drivers/video/omap2/omapfb/omapfb-main.c
++++ b/drivers/video/omap2/omapfb/omapfb-main.c
+@@ -1988,7 +1988,15 @@ static int omapfb_mode_to_timings(const char *mode_str,
+ 	int r;
+ 
+ #ifdef CONFIG_OMAP2_DSS_VENC
+-	if (strcmp(mode_str, "pal") == 0) {
++	if (strcmp(mode_str, "pal-16") == 0) {
++		*timings = omap_dss_pal_timings;
++		*bpp = 16;
++		return 0;
++	} else if (strcmp(mode_str, "ntsc-16") == 0) {
++		*timings = omap_dss_ntsc_timings;
++		*bpp = 16;
++		return 0;
++	} else if (strcmp(mode_str, "pal") == 0) {
+ 		*timings = omap_dss_pal_timings;
+ 		*bpp = 0;
+ 		return 0;
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0015-ISP-add-some-more-from-Leopard-imaging-patch.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0015-ISP-add-some-more-from-Leopard-imaging-patch.patch
new file mode 100644
index 0000000..ce57880
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0015-ISP-add-some-more-from-Leopard-imaging-patch.patch
@@ -0,0 +1,133 @@
+From a30000387ff4ec1ab0ca46c2429bfd184210bb24 Mon Sep 17 00:00:00 2001
+From: Koen Kooi <k-kooi@ti.com>
+Date: Thu, 11 Feb 2010 21:34:00 +0100
+Subject: [PATCH 15/45] ISP: add some more from Leopard imaging patch
+
+---
+ drivers/media/video/isp/isppreview.c |   16 ++++++++-
+ include/media/v4l2-int-device.h      |   58 ++++++++++++++++++++++++++++++++++
+ 2 files changed, 72 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/media/video/isp/isppreview.c b/drivers/media/video/isp/isppreview.c
+index 5494efc..85ee25d 100644
+--- a/drivers/media/video/isp/isppreview.c
++++ b/drivers/media/video/isp/isppreview.c
+@@ -79,13 +79,26 @@ static struct ispprev_rgbtorgb flr_rgb2rgb = {
+ 	{0x0000, 0x0000, 0x0000}
+ };
+ 
++static struct ispprev_rgbtorgb unity_rgb2rgb = {
++	{	/* RGB-RGB Matrix */
++		{0x0100, 0x0000, 0x0000},
++		{0x0000, 0x0100, 0x0000},
++		{0x0000, 0x0000, 0x0100}
++	},	/* RGB Offset */
++	{0x0000, 0x0000, 0x0000}
++};
++
+ /* Default values in Office Flourescent Light for RGB to YUV Conversion*/
+ static struct ispprev_csc flr_prev_csc[] = {
+ 	{
+ 		{	/* CSC Coef Matrix */
+-			{66, 129, 25},
++/*			{66, 129, 25},
+ 			{-38, -75, 112},
+ 			{112, -94 , -18}
++*/
++			{0x04C, 0x098, 0x01C},	
++			{0x3D4, 0x3AC, 0x080},
++			{0x080, 0x39E, 0x3EC}
+ 		},	/* CSC Offset */
+ 		{0x0, 0x0, 0x0}
+ 	},
+@@ -107,7 +120,6 @@ static struct ispprev_csc flr_prev_csc[] = {
+ 	}
+ };
+ 
+-
+ /* Default values in Office Flourescent Light for CFA Gradient*/
+ #define FLR_CFA_GRADTHRS_HORZ	0x28
+ #define FLR_CFA_GRADTHRS_VERT	0x28
+diff --git a/include/media/v4l2-int-device.h b/include/media/v4l2-int-device.h
+index ed32d3f..ce415ec 100644
+--- a/include/media/v4l2-int-device.h
++++ b/include/media/v4l2-int-device.h
+@@ -113,6 +113,8 @@ enum v4l2_if_type {
+ 	 * on certain image sensors.
+ 	 */
+ 	V4L2_IF_TYPE_BT656,
++	V4L2_IF_TYPE_YCbCr,
++	V4L2_IF_TYPE_RAW,
+ };
+ 
+ enum v4l2_if_type_bt656_mode {
+@@ -159,10 +161,66 @@ struct v4l2_if_type_bt656 {
+ 	u32 clock_curr;
+ };
+ 
++struct v4l2_if_type_ycbcr {
++	/*
++	 * 0: Frame begins when vsync is high.
++	 * 1: Frame begins when vsync changes from low to high.
++	 */
++	unsigned frame_start_on_rising_vs:1;
++	/* Use Bt synchronisation codes for sync correction. */
++	unsigned bt_sync_correct:1;
++	/* Swap every two adjacent image data elements. */
++	unsigned swap:1;
++	/* Inverted latch clock polarity from slave. */
++	unsigned latch_clk_inv:1;
++	/* Hs polarity. 0 is active high, 1 active low. */
++	unsigned nobt_hs_inv:1;
++	/* Vs polarity. 0 is active high, 1 active low. */
++	unsigned nobt_vs_inv:1;
++	/* Minimum accepted bus clock for slave (in Hz). */
++	u32 clock_min;
++	/* Maximum accepted bus clock for slave. */
++	u32 clock_max;
++	/*
++	 * Current wish of the slave. May only change in response to
++	 * ioctls that affect image capture.
++	 */
++	u32 clock_curr;
++};
++
++struct v4l2_if_type_raw {
++	/*
++	 * 0: Frame begins when vsync is high.
++	 * 1: Frame begins when vsync changes from low to high.
++	 */
++	unsigned frame_start_on_rising_vs:1;
++	/* Use Bt synchronisation codes for sync correction. */
++	unsigned bt_sync_correct:1;
++	/* Swap every two adjacent image data elements. */
++	unsigned swap:1;
++	/* Inverted latch clock polarity from slave. */
++	unsigned latch_clk_inv:1;
++	/* Hs polarity. 0 is active high, 1 active low. */
++	unsigned nobt_hs_inv:1;
++	/* Vs polarity. 0 is active high, 1 active low. */
++	unsigned nobt_vs_inv:1;
++	/* Minimum accepted bus clock for slave (in Hz). */
++	u32 clock_min;
++	/* Maximum accepted bus clock for slave. */
++	u32 clock_max;
++	/*
++	 * Current wish of the slave. May only change in response to
++	 * ioctls that affect image capture.
++	 */
++	u32 clock_curr;
++};
++
+ struct v4l2_ifparm {
+ 	enum v4l2_if_type if_type;
+ 	union {
+ 		struct v4l2_if_type_bt656 bt656;
++		struct v4l2_if_type_ycbcr ycbcr;
++		struct v4l2_if_type_raw raw;
+ 	} u;
+ };
+ 
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0016-ARM-OMAP-Overo-Add-support-for-second-ethernet-port.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0016-ARM-OMAP-Overo-Add-support-for-second-ethernet-port.patch
new file mode 100644
index 0000000..923efee
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0016-ARM-OMAP-Overo-Add-support-for-second-ethernet-port.patch
@@ -0,0 +1,110 @@
+From 0edbb992b0bc4e6a1b39d760695a4857b9b7ffa7 Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <sakoman@gmail.com>
+Date: Tue, 15 Dec 2009 14:59:42 -0800
+Subject: [PATCH 16/45] ARM: OMAP: Overo: Add support for second ethernet port
+
+Signed-off-by: Steve Sakoman <sakoman@gmail.com>
+---
+ arch/arm/mach-omap2/board-overo.c |   56 +++++++++++++++++++++++++++++++++++--
+ 1 files changed, 53 insertions(+), 3 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
+index e0aebc3..6204b8c 100644
+--- a/arch/arm/mach-omap2/board-overo.c
++++ b/arch/arm/mach-omap2/board-overo.c
+@@ -63,6 +63,8 @@
+ 
+ #define OVERO_SMSC911X_CS      5
+ #define OVERO_SMSC911X_GPIO    176
++#define OVERO_SMSC911X2_CS     4
++#define OVERO_SMSC911X2_GPIO   65
+ 
+ #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
+ 	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+@@ -137,6 +139,16 @@ static struct resource overo_smsc911x_resources[] = {
+ 	},
+ };
+ 
++static struct resource overo_smsc911x2_resources[] = {
++	{
++		.name	= "smsc911x2-memory",
++		.flags	= IORESOURCE_MEM,
++	},
++	{
++		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
++	},
++};
++
+ static struct smsc911x_platform_config overo_smsc911x_config = {
+ 	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ 	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+@@ -146,7 +158,7 @@ static struct smsc911x_platform_config overo_smsc911x_config = {
+ 
+ static struct platform_device overo_smsc911x_device = {
+ 	.name		= "smsc911x",
+-	.id		= -1,
++	.id		= 0,
+ 	.num_resources	= ARRAY_SIZE(overo_smsc911x_resources),
+ 	.resource	= overo_smsc911x_resources,
+ 	.dev		= {
+@@ -154,9 +166,26 @@ static struct platform_device overo_smsc911x_device = {
+ 	},
+ };
+ 
++static struct platform_device overo_smsc911x2_device = {
++	.name		= "smsc911x",
++	.id		= 1,
++	.num_resources	= ARRAY_SIZE(overo_smsc911x2_resources),
++	.resource	= overo_smsc911x2_resources,
++	.dev		= {
++		.platform_data = &overo_smsc911x_config,
++	},
++};
++
++static struct platform_device *smsc911x_devices[] = {
++	&overo_smsc911x_device,
++	&overo_smsc911x2_device,
++};
++
+ static inline void __init overo_init_smsc911x(void)
+ {
+-	unsigned long cs_mem_base;
++	unsigned long cs_mem_base, cs_mem_base2;
++
++	/* set up first smsc911x chip */
+ 
+ 	if (gpmc_cs_request(OVERO_SMSC911X_CS, SZ_16M, &cs_mem_base) < 0) {
+ 		printk(KERN_ERR "Failed request for GPMC mem for smsc911x\n");
+@@ -177,7 +206,28 @@ static inline void __init overo_init_smsc911x(void)
+ 	overo_smsc911x_resources[1].start = OMAP_GPIO_IRQ(OVERO_SMSC911X_GPIO);
+ 	overo_smsc911x_resources[1].end	  = 0;
+ 
+-	platform_device_register(&overo_smsc911x_device);
++	/* set up second smsc911x chip */
++
++	if (gpmc_cs_request(OVERO_SMSC911X2_CS, SZ_16M, &cs_mem_base2) < 0) {
++		printk(KERN_ERR "Failed request for GPMC mem for smsc911x2\n");
++		return;
++	}
++
++	overo_smsc911x2_resources[0].start = cs_mem_base2 + 0x0;
++	overo_smsc911x2_resources[0].end   = cs_mem_base2 + 0xff;
++
++	if ((gpio_request(OVERO_SMSC911X2_GPIO, "SMSC911X2 IRQ") == 0) &&
++	    (gpio_direction_input(OVERO_SMSC911X2_GPIO) == 0)) {
++		gpio_export(OVERO_SMSC911X2_GPIO, 0);
++	} else {
++		printk(KERN_ERR "could not obtain gpio for SMSC911X2 IRQ\n");
++		return;
++	}
++
++	overo_smsc911x2_resources[1].start = OMAP_GPIO_IRQ(OVERO_SMSC911X2_GPIO);
++	overo_smsc911x2_resources[1].end   = 0;
++
++	platform_add_devices(smsc911x_devices, ARRAY_SIZE(smsc911x_devices));
+ }
+ 
+ #else
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0017-drivers-net-smsc911x-return-ENODEV-if-device-is-not-.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0017-drivers-net-smsc911x-return-ENODEV-if-device-is-not-.patch
new file mode 100644
index 0000000..89812cc
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0017-drivers-net-smsc911x-return-ENODEV-if-device-is-not-.patch
@@ -0,0 +1,29 @@
+From 5c527b02d8511b5210bdddc6fcfd009bfcaff3d7 Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <sakoman@gmail.com>
+Date: Tue, 15 Dec 2009 15:17:44 -0800
+Subject: [PATCH 17/45] drivers: net: smsc911x: return ENODEV if device is not found
+
+Signed-off-by: Steve Sakoman <sakoman@gmail.com>
+---
+ drivers/net/smsc911x.c |    4 +++-
+ 1 files changed, 3 insertions(+), 1 deletions(-)
+
+diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
+index 494cd91..2472cb0 100644
+--- a/drivers/net/smsc911x.c
++++ b/drivers/net/smsc911x.c
+@@ -2021,8 +2021,10 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
+ 	}
+ 
+ 	retval = smsc911x_init(dev);
+-	if (retval < 0)
++	if (retval < 0) {
++		retval = -ENODEV;
+ 		goto out_unmap_io_3;
++	}
+ 
+ 	/* configure irq polarity and type before connecting isr */
+ 	if (pdata->config.irq_polarity == SMSC911X_IRQ_POLARITY_ACTIVE_HIGH)
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0018-drivers-input-touchscreen-ads7846-return-ENODEV-if-d.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0018-drivers-input-touchscreen-ads7846-return-ENODEV-if-d.patch
new file mode 100644
index 0000000..c8bfc34
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0018-drivers-input-touchscreen-ads7846-return-ENODEV-if-d.patch
@@ -0,0 +1,53 @@
+From 88b6ac2d3b90cc8eb8d130673c96645bb439e47c Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <sakoman@gmail.com>
+Date: Tue, 15 Dec 2009 15:24:10 -0800
+Subject: [PATCH 18/45] drivers: input: touchscreen: ads7846: return ENODEV if device is not found
+
+Signed-off-by: Steve Sakoman <sakoman@gmail.com>
+---
+ drivers/input/touchscreen/ads7846.c |   13 ++++++++++---
+ 1 files changed, 10 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
+index e53ac1f..45287ab 100644
+--- a/drivers/input/touchscreen/ads7846.c
++++ b/drivers/input/touchscreen/ads7846.c
+@@ -1165,9 +1165,16 @@ static int __devinit ads7846_probe(struct spi_device *spi)
+ 	/* take a first sample, leaving nPENIRQ active and vREF off; avoid
+ 	 * the touchscreen, in case it's not connected.
+ 	 */
+-	(void) ads7846_read12_ser(&spi->dev,
++	err = ads7846_read12_ser(&spi->dev,
+ 			  READ_12BIT_SER(vaux) | ADS_PD10_ALL_ON);
+ 
++	/* if sample is all 0's or all 1's then there is no device on spi */	
++	if ( (err == 0x000) || (err == 0xfff)) {
++		dev_info(&spi->dev, "no device detected, test read result was 0x%08X\n", err);
++		err = -ENODEV;
++		goto err_free_irq;
++	}
++
+ 	err = sysfs_create_group(&spi->dev.kobj, &ads784x_attr_group);
+ 	if (err)
+ 		goto err_remove_hwmon;
+@@ -1188,7 +1195,7 @@ static int __devinit ads7846_probe(struct spi_device *spi)
+  err_free_irq:
+ 	free_irq(spi->irq, ts);
+  err_free_gpio:
+-	if (ts->gpio_pendown != -1)
++	if (!ts->get_pendown_state && ts->gpio_pendown != -1)
+ 		gpio_free(ts->gpio_pendown);
+  err_cleanup_filter:
+ 	if (ts->filter_cleanup)
+@@ -1216,7 +1223,7 @@ static int __devexit ads7846_remove(struct spi_device *spi)
+ 	/* suspend left the IRQ disabled */
+ 	enable_irq(ts->spi->irq);
+ 
+-	if (ts->gpio_pendown != -1)
++	if (!ts->get_pendown_state && ts->gpio_pendown != -1)
+ 		gpio_free(ts->gpio_pendown);
+ 
+ 	if (ts->filter_cleanup)
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0019-drivers-mfd-add-twl4030-madc-driver.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0019-drivers-mfd-add-twl4030-madc-driver.patch
new file mode 100644
index 0000000..51252a3
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0019-drivers-mfd-add-twl4030-madc-driver.patch
@@ -0,0 +1,601 @@
+From 0aee5eef478b55bf987c45ced3365099e28698cb Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Thu, 17 Dec 2009 14:19:34 -0800
+Subject: [PATCH 19/45] drivers: mfd: add twl4030 madc driver
+
+---
+ drivers/mfd/Kconfig        |   21 ++
+ drivers/mfd/Makefile       |    1 +
+ drivers/mfd/twl4030-madc.c |  536 ++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 558 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/mfd/twl4030-madc.c
+
+diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
+index 8782978..aefdd66 100644
+--- a/drivers/mfd/Kconfig
++++ b/drivers/mfd/Kconfig
+@@ -135,6 +135,27 @@ config TWL4030_CODEC
+ 	select MFD_CORE
+ 	default n
+ 
++config TWL4030_MADC
++	tristate "TWL4030 MADC Driver"
++	depends on TWL4030_CORE
++	help
++	  The TWL4030 Monitoring ADC driver enables the host
++	  processor to monitor analog signals using analog-to-digital
++	  conversions on the input source. TWL4030 MADC provides the
++	  following features:
++	   - Single 10-bit ADC with successive approximation register (SAR) conversion;
++	   - Analog multiplexer for 16 inputs;
++	   - Seven (of the 16) inputs are freely available;
++	   - Battery voltage monitoring;
++	   - Concurrent conversion request management;
++	   - Interrupt signal to Primary Interrupt Handler;
++	   - Averaging feature;
++	   - Selective enable/disable of the averaging feature.
++
++	  Say 'y' here to statically link this module into the kernel or 'm'
++	  to build it as a dinamically loadable module. The module will be
++	  called twl4030-madc.ko
++
+ config MFD_TMIO
+ 	bool
+ 	default n
+diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
+index ca2f2c4..ec9c4f2 100644
+--- a/drivers/mfd/Makefile
++++ b/drivers/mfd/Makefile
+@@ -29,6 +29,7 @@ obj-$(CONFIG_MENELAUS)		+= menelaus.o
+ obj-$(CONFIG_TWL4030_CORE)	+= twl-core.o twl4030-irq.o twl6030-irq.o
+ obj-$(CONFIG_TWL4030_POWER)    += twl4030-power.o
+ obj-$(CONFIG_TWL4030_CODEC)	+= twl4030-codec.o
++obj-$(CONFIG_TWL4030_MADC)	+= twl4030-madc.o
+ 
+ obj-$(CONFIG_MFD_MC13783)	+= mc13783-core.o
+ 
+diff --git a/drivers/mfd/twl4030-madc.c b/drivers/mfd/twl4030-madc.c
+new file mode 100644
+index 0000000..7d83ab8
+--- /dev/null
++++ b/drivers/mfd/twl4030-madc.c
+@@ -0,0 +1,536 @@
++/*
++ * TWL4030 MADC module driver
++ *
++ * Copyright (C) 2008 Nokia Corporation
++ * Mikko Ylinen <mikko.k.ylinen@nokia.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
++ * 02110-1301 USA
++ *
++ */
++
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/module.h>
++#include <linux/delay.h>
++#include <linux/fs.h>
++#include <linux/platform_device.h>
++#include <linux/miscdevice.h>
++#include <linux/i2c/twl4030.h>
++#include <linux/i2c/twl4030-madc.h>
++
++#include <asm/uaccess.h>
++
++#define TWL4030_MADC_PFX	"twl4030-madc: "
++
++struct twl4030_madc_data {
++	struct device		*dev;
++	struct mutex		lock;
++	struct work_struct	ws;
++	struct twl4030_madc_request	requests[TWL4030_MADC_NUM_METHODS];
++	int imr;
++	int isr;
++};
++
++static struct twl4030_madc_data *the_madc;
++
++static
++const struct twl4030_madc_conversion_method twl4030_conversion_methods[] = {
++	[TWL4030_MADC_RT] = {
++		.sel	= TWL4030_MADC_RTSELECT_LSB,
++		.avg	= TWL4030_MADC_RTAVERAGE_LSB,
++		.rbase	= TWL4030_MADC_RTCH0_LSB,
++	},
++	[TWL4030_MADC_SW1] = {
++		.sel	= TWL4030_MADC_SW1SELECT_LSB,
++		.avg	= TWL4030_MADC_SW1AVERAGE_LSB,
++		.rbase	= TWL4030_MADC_GPCH0_LSB,
++		.ctrl	= TWL4030_MADC_CTRL_SW1,
++	},
++	[TWL4030_MADC_SW2] = {
++		.sel	= TWL4030_MADC_SW2SELECT_LSB,
++		.avg	= TWL4030_MADC_SW2AVERAGE_LSB,
++		.rbase	= TWL4030_MADC_GPCH0_LSB,
++		.ctrl	= TWL4030_MADC_CTRL_SW2,
++	},
++};
++
++static int twl4030_madc_read(struct twl4030_madc_data *madc, u8 reg)
++{
++	int ret;
++	u8 val;
++
++	ret = twl4030_i2c_read_u8(TWL4030_MODULE_MADC, &val, reg);
++	if (ret) {
++		dev_dbg(madc->dev, "unable to read register 0x%X\n", reg);
++		return ret;
++	}
++
++	return val;
++}
++
++static void twl4030_madc_write(struct twl4030_madc_data *madc, u8 reg, u8 val)
++{
++	int ret;
++
++	ret = twl4030_i2c_write_u8(TWL4030_MODULE_MADC, val, reg);
++	if (ret)
++		dev_err(madc->dev, "unable to write register 0x%X\n", reg);
++}
++
++static int twl4030_madc_channel_raw_read(struct twl4030_madc_data *madc, u8 reg)
++{
++	u8 msb, lsb;
++
++	/* For each ADC channel, we have MSB and LSB register pair. MSB address
++	 * is always LSB address+1. reg parameter is the addr of LSB register */
++	msb = twl4030_madc_read(madc, reg + 1);
++	lsb = twl4030_madc_read(madc, reg);
++
++	return (int)(((msb << 8) | lsb) >> 6);
++}
++
++static int twl4030_madc_read_channels(struct twl4030_madc_data *madc,
++		u8 reg_base, u16 channels, int *buf)
++{
++	int count = 0;
++	u8 reg, i;
++
++	if (unlikely(!buf))
++		return 0;
++
++	for (i = 0; i < TWL4030_MADC_MAX_CHANNELS; i++) {
++		if (channels & (1<<i)) {
++			reg = reg_base + 2*i;
++			buf[i] = twl4030_madc_channel_raw_read(madc, reg);
++			count++;
++		}
++	}
++	return count;
++}
++
++static void twl4030_madc_enable_irq(struct twl4030_madc_data *madc, int id)
++{
++	u8 val;
++
++	val = twl4030_madc_read(madc, madc->imr);
++	val &= ~(1 << id);
++	twl4030_madc_write(madc, madc->imr, val);
++}
++
++static void twl4030_madc_disable_irq(struct twl4030_madc_data *madc, int id)
++{
++	u8 val;
++
++	val = twl4030_madc_read(madc, madc->imr);
++	val |= (1 << id);
++	twl4030_madc_write(madc, madc->imr, val);
++}
++
++static irqreturn_t twl4030_madc_irq_handler(int irq, void *_madc)
++{
++	struct twl4030_madc_data *madc = _madc;
++	u8 isr_val, imr_val;
++	int i;
++
++#ifdef CONFIG_LOCKDEP
++	/* WORKAROUND for lockdep forcing IRQF_DISABLED on us, which
++	 * we don't want and can't tolerate.  Although it might be
++	 * friendlier not to borrow this thread context...
++	 */
++	local_irq_enable();
++#endif
++
++	/* Use COR to ack interrupts since we have no shared IRQs in ISRx */
++	isr_val = twl4030_madc_read(madc, madc->isr);
++	imr_val = twl4030_madc_read(madc, madc->imr);
++
++	isr_val &= ~imr_val;
++
++	for (i = 0; i < TWL4030_MADC_NUM_METHODS; i++) {
++
++		if (!(isr_val & (1<<i)))
++			continue;
++
++		twl4030_madc_disable_irq(madc, i);
++		madc->requests[i].result_pending = 1;
++	}
++
++	schedule_work(&madc->ws);
++
++	return IRQ_HANDLED;
++}
++
++static void twl4030_madc_work(struct work_struct *ws)
++{
++	const struct twl4030_madc_conversion_method *method;
++	struct twl4030_madc_data *madc;
++	struct twl4030_madc_request *r;
++	int len, i;
++
++	madc = container_of(ws, struct twl4030_madc_data, ws);
++	mutex_lock(&madc->lock);
++
++	for (i = 0; i < TWL4030_MADC_NUM_METHODS; i++) {
++
++		r = &madc->requests[i];
++
++		/* No pending results for this method, move to next one */
++		if (!r->result_pending)
++			continue;
++
++		method = &twl4030_conversion_methods[r->method];
++
++		/* Read results */
++		len = twl4030_madc_read_channels(madc, method->rbase,
++						 r->channels, r->rbuf);
++
++		/* Return results to caller */
++		if (r->func_cb != NULL) {
++			r->func_cb(len, r->channels, r->rbuf);
++			r->func_cb = NULL;
++		}
++
++		/* Free request */
++		r->result_pending = 0;
++		r->active	  = 0;
++	}
++
++	mutex_unlock(&madc->lock);
++}
++
++static int twl4030_madc_set_irq(struct twl4030_madc_data *madc,
++		struct twl4030_madc_request *req)
++{
++	struct twl4030_madc_request *p;
++
++	p = &madc->requests[req->method];
++
++	memcpy(p, req, sizeof *req);
++
++	twl4030_madc_enable_irq(madc, req->method);
++
++	return 0;
++}
++
++static inline void twl4030_madc_start_conversion(struct twl4030_madc_data *madc,
++		int conv_method)
++{
++	const struct twl4030_madc_conversion_method *method;
++
++	method = &twl4030_conversion_methods[conv_method];
++
++	switch (conv_method) {
++	case TWL4030_MADC_SW1:
++	case TWL4030_MADC_SW2:
++		twl4030_madc_write(madc, method->ctrl, TWL4030_MADC_SW_START);
++		break;
++	case TWL4030_MADC_RT:
++	default:
++		break;
++	}
++}
++
++static int twl4030_madc_wait_conversion_ready(
++		struct twl4030_madc_data *madc,
++		unsigned int timeout_ms, u8 status_reg)
++{
++	unsigned long timeout;
++
++	timeout = jiffies + msecs_to_jiffies(timeout_ms);
++	do {
++		u8 reg;
++
++		reg = twl4030_madc_read(madc, status_reg);
++		if (!(reg & TWL4030_MADC_BUSY) && (reg & TWL4030_MADC_EOC_SW))
++			return 0;
++	} while (!time_after(jiffies, timeout));
++
++	return -EAGAIN;
++}
++
++int twl4030_madc_conversion(struct twl4030_madc_request *req)
++{
++	const struct twl4030_madc_conversion_method *method;
++	u8 ch_msb, ch_lsb;
++	int ret;
++
++	if (unlikely(!req))
++		return -EINVAL;
++
++	mutex_lock(&the_madc->lock);
++
++	/* Do we have a conversion request ongoing */
++	if (the_madc->requests[req->method].active) {
++		ret = -EBUSY;
++		goto out;
++	}
++
++	ch_msb = (req->channels >> 8) & 0xff;
++	ch_lsb = req->channels & 0xff;
++
++	method = &twl4030_conversion_methods[req->method];
++
++	/* Select channels to be converted */
++	twl4030_madc_write(the_madc, method->sel + 1, ch_msb);
++	twl4030_madc_write(the_madc, method->sel, ch_lsb);
++
++	/* Select averaging for all channels if do_avg is set */
++	if (req->do_avg) {
++		twl4030_madc_write(the_madc, method->avg + 1, ch_msb);
++		twl4030_madc_write(the_madc, method->avg, ch_lsb);
++	}
++
++	if ((req->type == TWL4030_MADC_IRQ_ONESHOT) && (req->func_cb != NULL)) {
++		twl4030_madc_set_irq(the_madc, req);
++		twl4030_madc_start_conversion(the_madc, req->method);
++		the_madc->requests[req->method].active = 1;
++		ret = 0;
++		goto out;
++	}
++
++	/* With RT method we should not be here anymore */
++	if (req->method == TWL4030_MADC_RT) {
++		ret = -EINVAL;
++		goto out;
++	}
++
++	twl4030_madc_start_conversion(the_madc, req->method);
++	the_madc->requests[req->method].active = 1;
++
++	/* Wait until conversion is ready (ctrl register returns EOC) */
++	ret = twl4030_madc_wait_conversion_ready(the_madc, 5, method->ctrl);
++	if (ret) {
++		dev_dbg(the_madc->dev, "conversion timeout!\n");
++		the_madc->requests[req->method].active = 0;
++		goto out;
++	}
++
++	ret = twl4030_madc_read_channels(the_madc, method->rbase, req->channels,
++					 req->rbuf);
++
++	the_madc->requests[req->method].active = 0;
++
++out:
++	mutex_unlock(&the_madc->lock);
++
++	return ret;
++}
++EXPORT_SYMBOL(twl4030_madc_conversion);
++
++static int twl4030_madc_set_current_generator(struct twl4030_madc_data *madc,
++		int chan, int on)
++{
++	int ret;
++	u8 regval;
++
++	/* Current generator is only available for ADCIN0 and ADCIN1. NB:
++	 * ADCIN1 current generator only works when AC or VBUS is present */
++	if (chan > 1)
++		return EINVAL;
++
++	ret = twl4030_i2c_read_u8(TWL4030_MODULE_MAIN_CHARGE,
++				  &regval, TWL4030_BCI_BCICTL1);
++	if (on)
++		regval |= (chan) ? TWL4030_BCI_ITHEN : TWL4030_BCI_TYPEN;
++	else
++		regval &= (chan) ? ~TWL4030_BCI_ITHEN : ~TWL4030_BCI_TYPEN;
++	ret = twl4030_i2c_write_u8(TWL4030_MODULE_MAIN_CHARGE,
++				   regval, TWL4030_BCI_BCICTL1);
++
++	return ret;
++}
++
++static int twl4030_madc_set_power(struct twl4030_madc_data *madc, int on)
++{
++	u8 regval;
++
++	regval = twl4030_madc_read(madc, TWL4030_MADC_CTRL1);
++	if (on)
++		regval |= TWL4030_MADC_MADCON;
++	else
++		regval &= ~TWL4030_MADC_MADCON;
++	twl4030_madc_write(madc, TWL4030_MADC_CTRL1, regval);
++
++	return 0;
++}
++
++static long twl4030_madc_ioctl(struct file *filp, unsigned int cmd,
++			       unsigned long arg)
++{
++	struct twl4030_madc_user_parms par;
++	int val, ret;
++
++	ret = copy_from_user(&par, (void __user *) arg, sizeof(par));
++	if (ret) {
++		dev_dbg(the_madc->dev, "copy_from_user: %d\n", ret);
++		return -EACCES;
++	}
++
++	switch (cmd) {
++	case TWL4030_MADC_IOCX_ADC_RAW_READ: {
++		struct twl4030_madc_request req;
++		if (par.channel >= TWL4030_MADC_MAX_CHANNELS)
++			return -EINVAL;
++
++		req.channels = (1 << par.channel);
++		req.do_avg	= par.average;
++		req.method	= TWL4030_MADC_SW1;
++		req.func_cb	= NULL;
++
++		val = twl4030_madc_conversion(&req);
++		if (val <= 0) {
++			par.status = -1;
++		} else {
++			par.status = 0;
++			par.result = (u16)req.rbuf[par.channel];
++		}
++		break;
++					     }
++	default:
++		return -EINVAL;
++	}
++
++	ret = copy_to_user((void __user *) arg, &par, sizeof(par));
++	if (ret) {
++		dev_dbg(the_madc->dev, "copy_to_user: %d\n", ret);
++		return -EACCES;
++	}
++
++	return 0;
++}
++
++static struct file_operations twl4030_madc_fileops = {
++	.owner = THIS_MODULE,
++	.unlocked_ioctl = twl4030_madc_ioctl
++};
++
++static struct miscdevice twl4030_madc_device = {
++	.minor = MISC_DYNAMIC_MINOR,
++	.name = "twl4030-madc",
++	.fops = &twl4030_madc_fileops
++};
++
++static int __init twl4030_madc_probe(struct platform_device *pdev)
++{
++	struct twl4030_madc_data *madc;
++	struct twl4030_madc_platform_data *pdata = pdev->dev.platform_data;
++	int ret;
++	u8 regval;
++
++	madc = kzalloc(sizeof *madc, GFP_KERNEL);
++	if (!madc)
++		return -ENOMEM;
++
++	if (!pdata) {
++		dev_dbg(&pdev->dev, "platform_data not available\n");
++		ret = -EINVAL;
++		goto err_pdata;
++	}
++
++	madc->imr = (pdata->irq_line == 1) ? TWL4030_MADC_IMR1 : TWL4030_MADC_IMR2;
++	madc->isr = (pdata->irq_line == 1) ? TWL4030_MADC_ISR1 : TWL4030_MADC_ISR2;
++
++	ret = misc_register(&twl4030_madc_device);
++	if (ret) {
++		dev_dbg(&pdev->dev, "could not register misc_device\n");
++		goto err_misc;
++	}
++	twl4030_madc_set_power(madc, 1);
++	twl4030_madc_set_current_generator(madc, 0, 1);
++
++	/* Enable ADCIN3 through 6 */
++	ret = twl4030_i2c_read_u8(TWL4030_MODULE_USB,
++				  &regval, TWL4030_USB_CARKIT_ANA_CTRL);
++
++	regval |= TWL4030_USB_SEL_MADC_MCPC;
++
++	ret = twl4030_i2c_write_u8(TWL4030_MODULE_USB,
++				regval, TWL4030_USB_CARKIT_ANA_CTRL);
++
++
++	ret = twl4030_i2c_read_u8(TWL4030_MODULE_MAIN_CHARGE,
++				  &regval, TWL4030_BCI_BCICTL1);
++
++	regval |= TWL4030_BCI_MESBAT;
++
++	ret = twl4030_i2c_write_u8(TWL4030_MODULE_MAIN_CHARGE,
++				   regval, TWL4030_BCI_BCICTL1);
++
++	ret = request_irq(platform_get_irq(pdev, 0), twl4030_madc_irq_handler,
++			  0, "twl4030_madc", madc);
++	if (ret) {
++		dev_dbg(&pdev->dev, "could not request irq\n");
++		goto err_irq;
++	}
++
++	platform_set_drvdata(pdev, madc);
++	mutex_init(&madc->lock);
++	INIT_WORK(&madc->ws, twl4030_madc_work);
++
++	the_madc = madc;
++
++	return 0;
++
++err_irq:
++	misc_deregister(&twl4030_madc_device);
++
++err_misc:
++err_pdata:
++	kfree(madc);
++
++	return ret;
++}
++
++static int __exit twl4030_madc_remove(struct platform_device *pdev)
++{
++	struct twl4030_madc_data *madc = platform_get_drvdata(pdev);
++
++	twl4030_madc_set_power(madc, 0);
++	twl4030_madc_set_current_generator(madc, 0, 0);
++	free_irq(platform_get_irq(pdev, 0), madc);
++	cancel_work_sync(&madc->ws);
++	misc_deregister(&twl4030_madc_device);
++
++	return 0;
++}
++
++static struct platform_driver twl4030_madc_driver = {
++	.probe		= twl4030_madc_probe,
++	.remove		= __exit_p(twl4030_madc_remove),
++	.driver		= {
++		.name	= "twl4030_madc",
++		.owner	= THIS_MODULE,
++	},
++};
++
++static int __init twl4030_madc_init(void)
++{
++	return platform_driver_register(&twl4030_madc_driver);
++}
++module_init(twl4030_madc_init);
++
++static void __exit twl4030_madc_exit(void)
++{
++	platform_driver_unregister(&twl4030_madc_driver);
++}
++module_exit(twl4030_madc_exit);
++
++MODULE_ALIAS("platform:twl4030-madc");
++MODULE_AUTHOR("Nokia Corporation");
++MODULE_DESCRIPTION("twl4030 ADC driver");
++MODULE_LICENSE("GPL");
++
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0020-ARM-OMAP-Add-missing-twl4030-madc-header-file.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0020-ARM-OMAP-Add-missing-twl4030-madc-header-file.patch
new file mode 100644
index 0000000..87ce318
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0020-ARM-OMAP-Add-missing-twl4030-madc-header-file.patch
@@ -0,0 +1,149 @@
+From d93f9d5e636931519fb440cf8ad493c95bfaf5ca Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Thu, 17 Dec 2009 15:54:58 -0800
+Subject: [PATCH 20/45] ARM: OMAP: Add missing twl4030 madc header file
+
+---
+ include/linux/i2c/twl4030-madc.h |  130 ++++++++++++++++++++++++++++++++++++++
+ 1 files changed, 130 insertions(+), 0 deletions(-)
+ create mode 100644 include/linux/i2c/twl4030-madc.h
+
+diff --git a/include/linux/i2c/twl4030-madc.h b/include/linux/i2c/twl4030-madc.h
+new file mode 100644
+index 0000000..341a665
+--- /dev/null
++++ b/include/linux/i2c/twl4030-madc.h
+@@ -0,0 +1,130 @@
++/*
++ * include/linux/i2c/twl4030-madc.h
++ *
++ * TWL4030 MADC module driver header
++ *
++ * Copyright (C) 2008 Nokia Corporation
++ * Mikko Ylinen <mikko.k.ylinen@nokia.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
++ * 02110-1301 USA
++ *
++ */
++
++#ifndef _TWL4030_MADC_H
++#define _TWL4030_MADC_H
++
++struct twl4030_madc_conversion_method {
++	u8 sel;
++	u8 avg;
++	u8 rbase;
++	u8 ctrl;
++};
++
++#define TWL4030_MADC_MAX_CHANNELS 16
++
++struct twl4030_madc_request {
++	u16 channels;
++	u16 do_avg;
++	u16 method;
++	u16 type;
++	int active;
++	int result_pending;
++	int rbuf[TWL4030_MADC_MAX_CHANNELS];
++	void (*func_cb)(int len, int channels, int *buf);
++};
++
++enum conversion_methods {
++	TWL4030_MADC_RT,
++	TWL4030_MADC_SW1,
++	TWL4030_MADC_SW2,
++	TWL4030_MADC_NUM_METHODS
++};
++
++enum sample_type {
++	TWL4030_MADC_WAIT,
++	TWL4030_MADC_IRQ_ONESHOT,
++	TWL4030_MADC_IRQ_REARM
++};
++
++#define TWL4030_MADC_CTRL1		0x00
++#define TWL4030_MADC_CTRL2		0x01
++
++#define TWL4030_MADC_RTSELECT_LSB	0x02
++#define TWL4030_MADC_SW1SELECT_LSB	0x06
++#define TWL4030_MADC_SW2SELECT_LSB	0x0A
++
++#define TWL4030_MADC_RTAVERAGE_LSB	0x04
++#define TWL4030_MADC_SW1AVERAGE_LSB	0x08
++#define TWL4030_MADC_SW2AVERAGE_LSB	0x0C
++
++#define TWL4030_MADC_CTRL_SW1		0x12
++#define TWL4030_MADC_CTRL_SW2		0x13
++
++#define TWL4030_MADC_RTCH0_LSB		0x17
++#define TWL4030_MADC_GPCH0_LSB		0x37
++
++#define TWL4030_MADC_MADCON		(1<<0)	/* MADC power on */
++#define TWL4030_MADC_BUSY		(1<<0)	/* MADC busy */
++#define TWL4030_MADC_EOC_SW		(1<<1)	/* MADC conversion completion */
++#define TWL4030_MADC_SW_START		(1<<5)  /* MADC SWx start conversion */
++
++#define	TWL4030_MADC_ADCIN0		(1<<0)
++#define	TWL4030_MADC_ADCIN1		(1<<1)
++#define	TWL4030_MADC_ADCIN2		(1<<2)
++#define	TWL4030_MADC_ADCIN3		(1<<3)
++#define	TWL4030_MADC_ADCIN4		(1<<4)
++#define	TWL4030_MADC_ADCIN5		(1<<5)
++#define	TWL4030_MADC_ADCIN6		(1<<6)
++#define	TWL4030_MADC_ADCIN7		(1<<7)
++#define	TWL4030_MADC_ADCIN8		(1<<8)
++#define	TWL4030_MADC_ADCIN9		(1<<9)
++#define	TWL4030_MADC_ADCIN10		(1<<10)
++#define	TWL4030_MADC_ADCIN11		(1<<11)
++#define	TWL4030_MADC_ADCIN12		(1<<12)
++#define	TWL4030_MADC_ADCIN13		(1<<13)
++#define	TWL4030_MADC_ADCIN14		(1<<14)
++#define	TWL4030_MADC_ADCIN15		(1<<15)
++
++/* Fixed channels */
++#define TWL4030_MADC_BTEMP		TWL4030_MADC_ADCIN1
++#define TWL4030_MADC_VBUS		TWL4030_MADC_ADCIN8
++#define TWL4030_MADC_VBKB		TWL4030_MADC_ADCIN9
++#define	TWL4030_MADC_ICHG		TWL4030_MADC_ADCIN10
++#define TWL4030_MADC_VCHG		TWL4030_MADC_ADCIN11
++#define	TWL4030_MADC_VBAT		TWL4030_MADC_ADCIN12
++
++/* BCI related - XXX To be moved elsewhere */
++#define TWL4030_BCI_BCICTL1		0x23
++#define	TWL4030_BCI_MESBAT		(1<<1)
++#define	TWL4030_BCI_TYPEN		(1<<4)
++#define	TWL4030_BCI_ITHEN		(1<<3)
++
++/* USB related - XXX To be moved elsewhere */
++#define TWL4030_USB_CARKIT_ANA_CTRL		0xBB
++#define TWL4030_USB_SEL_MADC_MCPC		(1<<3)
++
++#define TWL4030_MADC_IOC_MAGIC '`'
++#define TWL4030_MADC_IOCX_ADC_RAW_READ		_IO(TWL4030_MADC_IOC_MAGIC, 0)
++
++struct twl4030_madc_user_parms {
++	int channel;
++	int average;
++	int status;
++	u16 result;
++};
++
++int twl4030_madc_conversion(struct twl4030_madc_request *conv);
++
++#endif
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0021-ARM-OMAP-Add-twl4030-madc-support-to-Overo.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0021-ARM-OMAP-Add-twl4030-madc-support-to-Overo.patch
new file mode 100644
index 0000000..471d07d
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0021-ARM-OMAP-Add-twl4030-madc-support-to-Overo.patch
@@ -0,0 +1,32 @@
+From bdde1d2b9726ebf0dd74f6dad0dfc858333ca784 Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Thu, 17 Dec 2009 14:27:15 -0800
+Subject: [PATCH 21/45] ARM: OMAP: Add twl4030 madc support to Overo
+
+---
+ arch/arm/mach-omap2/board-overo.c |    5 +++++
+ 1 files changed, 5 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
+index 6204b8c..9c76588 100644
+--- a/arch/arm/mach-omap2/board-overo.c
++++ b/arch/arm/mach-omap2/board-overo.c
+@@ -390,10 +390,15 @@ static struct twl4030_codec_data overo_codec_data = {
+ 
+ /* mmc2 (WLAN) and Bluetooth don't use twl4030 regulators */
+ 
++static struct twl4030_madc_platform_data overo_madc_data = {
++	.irq_line	= 1,
++};
++
+ static struct twl4030_platform_data overo_twldata = {
+ 	.irq_base	= TWL4030_IRQ_BASE,
+ 	.irq_end	= TWL4030_IRQ_END,
+ 	.gpio		= &overo_gpio_data,
++	.madc		= &overo_madc_data,
+ 	.usb		= &overo_usb_data,
+ 	.codec		= &overo_codec_data,
+ 	.vmmc1		= &overo_vmmc1,
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0022-ARM-OMAP-Add-twl4030-madc-support-to-Beagle.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0022-ARM-OMAP-Add-twl4030-madc-support-to-Beagle.patch
new file mode 100644
index 0000000..be53fda
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0022-ARM-OMAP-Add-twl4030-madc-support-to-Beagle.patch
@@ -0,0 +1,35 @@
+From 7775140814ed11c0332a57ed30f69c6da0ab466d Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Thu, 17 Dec 2009 14:32:36 -0800
+Subject: [PATCH 22/45] ARM: OMAP: Add twl4030 madc support to Beagle
+
+---
+ arch/arm/mach-omap2/board-omap3beagle.c |    5 +++++
+ 1 files changed, 5 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index cb11b07..c4ebaab 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -473,6 +473,10 @@ static struct twl4030_codec_data beagle_codec_data = {
+ 	.audio = &beagle_audio_data,
+ };
+ 
++static struct twl4030_madc_platform_data beagle_madc_data = {
++	.irq_line	= 1,
++};
++
+ static struct twl4030_platform_data beagle_twldata = {
+ 	.irq_base	= TWL4030_IRQ_BASE,
+ 	.irq_end	= TWL4030_IRQ_END,
+@@ -481,6 +485,7 @@ static struct twl4030_platform_data beagle_twldata = {
+ 	.usb		= &beagle_usb_data,
+ 	.gpio		= &beagle_gpio_data,
+ 	.codec		= &beagle_codec_data,
++	.madc		= &beagle_madc_data,
+ 	.vmmc1		= &beagle_vmmc1,
+ 	.vsim		= &beagle_vsim,
+ 	.vdac		= &beagle_vdac,
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0023-netdev-rt73usb-add-vendor-device-ID-for-Ceiva-Wirele.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0023-netdev-rt73usb-add-vendor-device-ID-for-Ceiva-Wirele.patch
new file mode 100644
index 0000000..ec26ee4
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0023-netdev-rt73usb-add-vendor-device-ID-for-Ceiva-Wirele.patch
@@ -0,0 +1,25 @@
+From c59df25a1d1ad6c7fbb11fac6e7404d05639f4bd Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Tue, 19 Jan 2010 20:00:46 -0800
+Subject: [PATCH 23/45] netdev: rt73usb - add vendor/device ID for Ceiva Wireless PartNo 81726-00702
+
+---
+ drivers/net/wireless/rt2x00/rt73usb.c |    2 ++
+ 1 files changed, 2 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
+index ced3b6a..719ac0a 100644
+--- a/drivers/net/wireless/rt2x00/rt73usb.c
++++ b/drivers/net/wireless/rt2x00/rt73usb.c
+@@ -2357,6 +2357,8 @@ static struct usb_device_id rt73usb_device_table[] = {
+ 	{ USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops) },
+ 	{ USB_DEVICE(0x0411, 0x0116), USB_DEVICE_DATA(&rt73usb_ops) },
+ 	{ USB_DEVICE(0x0411, 0x0119), USB_DEVICE_DATA(&rt73usb_ops) },
++	/* Ceiva Wireless PartNo 81726-00702 */
++	{ USB_DEVICE(0x178d, 0x02be), USB_DEVICE_DATA(&rt73usb_ops) },
+ 	/* CNet */
+ 	{ USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt73usb_ops) },
+ 	{ USB_DEVICE(0x1371, 0x9032), USB_DEVICE_DATA(&rt73usb_ops) },
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0024-mmc-don-t-display-single-block-read-console-messages.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0024-mmc-don-t-display-single-block-read-console-messages.patch
new file mode 100644
index 0000000..10bdffa
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0024-mmc-don-t-display-single-block-read-console-messages.patch
@@ -0,0 +1,28 @@
+From 1af64d89d41aae6ab26b61c23060a02af72b6fb2 Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Mon, 4 Jan 2010 19:20:25 -0800
+Subject: [PATCH 24/45] mmc: don't display single block read console messages
+
+mmc: don't display single block read console messages
+---
+ drivers/mmc/card/block.c |    4 ++--
+ 1 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
+index 85f0e8c..05492e9 100644
+--- a/drivers/mmc/card/block.c
++++ b/drivers/mmc/card/block.c
+@@ -338,8 +338,8 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
+ 		if (brq.cmd.error || brq.data.error || brq.stop.error) {
+ 			if (brq.data.blocks > 1 && rq_data_dir(req) == READ) {
+ 				/* Redo read one sector at a time */
+-				printk(KERN_WARNING "%s: retrying using single "
+-				       "block read\n", req->rq_disk->disk_name);
++				/* printk(KERN_WARNING "%s: retrying using single "
++				       "block read\n", req->rq_disk->disk_name); */
+ 				disable_multi = 1;
+ 				continue;
+ 			}
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0025-ARM-OMAP2-mmc-twl4030-move-clock-input-selection-pri.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0025-ARM-OMAP2-mmc-twl4030-move-clock-input-selection-pri.patch
new file mode 100644
index 0000000..358ba72
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0025-ARM-OMAP2-mmc-twl4030-move-clock-input-selection-pri.patch
@@ -0,0 +1,47 @@
+From 664b6e1a8f1bcd0bed227b367f7ed029a5be0fa7 Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Sun, 24 Jan 2010 09:33:56 -0800
+Subject: [PATCH 25/45] ARM: OMAP2: mmc-twl4030: move clock input selection prior to vcc test
+
+otherwise it is not executed on systems that use non-twl regulators
+---
+ arch/arm/mach-omap2/mmc-twl4030.c |   16 ++++++++--------
+ 1 files changed, 8 insertions(+), 8 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
+index 0c3c72d..dbdafb9 100644
+--- a/arch/arm/mach-omap2/mmc-twl4030.c
++++ b/arch/arm/mach-omap2/mmc-twl4030.c
+@@ -302,6 +302,14 @@ static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int v
+ 	if (c == NULL)
+ 		return -ENODEV;
+ 
++	if (mmc->slots[0].internal_clock) {
++		u32 reg;
++
++		reg = omap_ctrl_readl(control_devconf1_offset);
++		reg |= OMAP2_MMCSDIO2ADPCLKISEL;
++		omap_ctrl_writel(reg, control_devconf1_offset);
++	}
++
+ 	/* If we don't see a Vcc regulator, assume it's a fixed
+ 	 * voltage always-on regulator.
+ 	 */
+@@ -322,14 +330,6 @@ static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int v
+ 	 * chips/cards need an interface voltage rail too.
+ 	 */
+ 	if (power_on) {
+-		/* only MMC2 supports a CLKIN */
+-		if (mmc->slots[0].internal_clock) {
+-			u32 reg;
+-
+-			reg = omap_ctrl_readl(control_devconf1_offset);
+-			reg |= OMAP2_MMCSDIO2ADPCLKISEL;
+-			omap_ctrl_writel(reg, control_devconf1_offset);
+-		}
+ 		ret = mmc_regulator_set_ocr(c->vcc, vdd);
+ 		/* enable interface voltage rail, if needed */
+ 		if (ret == 0 && c->vcc_aux) {
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0026-board-overo-add-PM-code-and-sync-with-http-www.sakom.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0026-board-overo-add-PM-code-and-sync-with-http-www.sakom.patch
new file mode 100644
index 0000000..41e3846
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0026-board-overo-add-PM-code-and-sync-with-http-www.sakom.patch
@@ -0,0 +1,373 @@
+From 2b3cfbcd286a0c1b0df90b7af7982c772031abd8 Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@dominion.thruhere.net>
+Date: Sun, 14 Feb 2010 12:52:02 +0100
+Subject: [PATCH 26/45] board-overo: add PM code and sync with http://www.sakoman.com/cgi-bin/gitweb.cgi?p=linux-omap-2.6.git;a=shortlog;h=refs/heads/omap3-2.6.32
+
+---
+ arch/arm/mach-omap2/board-overo.c |  274 ++++++++++++++++++++++++++++++++-----
+ 1 files changed, 242 insertions(+), 32 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
+index 9c76588..2595f81 100644
+--- a/arch/arm/mach-omap2/board-overo.c
++++ b/arch/arm/mach-omap2/board-overo.c
+@@ -28,6 +28,7 @@
+ #include <linux/platform_device.h>
+ #include <linux/i2c/twl.h>
+ #include <linux/regulator/machine.h>
++#include <linux/spi/spi.h>
+ 
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/nand.h>
+@@ -40,16 +41,24 @@
+ 
+ #include <plat/board.h>
+ #include <plat/common.h>
++#include <plat/display.h>
+ #include <mach/gpio.h>
+ #include <plat/gpmc.h>
+ #include <mach/hardware.h>
+ #include <plat/nand.h>
++#include <plat/mcspi.h>
+ #include <plat/usb.h>
+-
+-#include "mux.h"
++#include <plat/clock.h>
++#include <plat/omap-pm.h>
++ 
+ #include "sdram-micron-mt46h32m32lf-6.h"
+ #include "mmc-twl4030.h"
+ 
++#include "mux.h"
++
++#include "pm.h"
++#include "omap3-opp.h"
++
+ #define OVERO_GPIO_BT_XGATE	15
+ #define OVERO_GPIO_W2W_NRESET	16
+ #define OVERO_GPIO_PENDOWN	114
+@@ -95,18 +104,6 @@ static struct ads7846_platform_data ads7846_config = {
+ 	.keep_vref_on		= 1,
+ };
+ 
+-static struct spi_board_info overo_spi_board_info[] __initdata = {
+-	{
+-		.modalias		= "ads7846",
+-		.bus_num		= 1,
+-		.chip_select		= 0,
+-		.max_speed_hz		= 1500000,
+-		.controller_data	= &ads7846_mcspi_config,
+-		.irq			= OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN),
+-		.platform_data		= &ads7846_config,
+-	}
+-};
+-
+ static void __init overo_ads7846_init(void)
+ {
+ 	if ((gpio_request(OVERO_GPIO_PENDOWN, "ADS7846_PENDOWN") == 0) &&
+@@ -116,9 +113,6 @@ static void __init overo_ads7846_init(void)
+ 		printk(KERN_ERR "could not obtain gpio for ADS7846_PENDOWN\n");
+ 		return;
+ 	}
+-
+-	spi_register_board_info(overo_spi_board_info,
+-			ARRAY_SIZE(overo_spi_board_info));
+ }
+ 
+ #else
+@@ -234,6 +228,169 @@ static inline void __init overo_init_smsc911x(void)
+ static inline void __init overo_init_smsc911x(void) { return; }
+ #endif
+ 
++/* DSS */
++static int lcd_enabled;
++static int dvi_enabled;
++
++#define OVERO_GPIO_LCD_EN 144
++#define OVERO_GPIO_LCD_BL 145
++
++static void __init overo_display_init(void)
++{
++	if ((gpio_request(OVERO_GPIO_LCD_EN, "OVERO_GPIO_LCD_EN") == 0) &&
++	    (gpio_direction_output(OVERO_GPIO_LCD_EN, 1) == 0))
++		gpio_export(OVERO_GPIO_LCD_EN, 0);
++	else
++		printk(KERN_ERR "could not obtain gpio for "
++					"OVERO_GPIO_LCD_EN\n");
++
++	if ((gpio_request(OVERO_GPIO_LCD_BL, "OVERO_GPIO_LCD_BL") == 0) &&
++	    (gpio_direction_output(OVERO_GPIO_LCD_BL, 1) == 0))
++		gpio_export(OVERO_GPIO_LCD_BL, 0);
++	else
++		printk(KERN_ERR "could not obtain gpio for "
++					"OVERO_GPIO_LCD_BL\n");
++}
++
++static int overo_panel_enable_dvi(struct omap_dss_device *dssdev)
++{
++	if (lcd_enabled) {
++		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
++		return -EINVAL;
++	}
++	dvi_enabled = 1;
++
++	return 0;
++}
++
++static void overo_panel_disable_dvi(struct omap_dss_device *dssdev)
++{
++	dvi_enabled = 0;
++}
++
++static struct omap_dss_device overo_dvi_device = {
++	.type			= OMAP_DISPLAY_TYPE_DPI,
++	.name			= "dvi",
++	.driver_name		= "generic_panel",
++	.phy.dpi.data_lines	= 24,
++	.platform_enable	= overo_panel_enable_dvi,
++	.platform_disable	= overo_panel_disable_dvi,
++};
++
++static int overo_panel_enable_tv(struct omap_dss_device *dssdev)
++{
++#define ENABLE_VDAC_DEDICATED           0x03
++#define ENABLE_VDAC_DEV_GRP             0x20
++
++	twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
++			ENABLE_VDAC_DEDICATED,
++			TWL4030_VDAC_DEDICATED);
++	twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
++			ENABLE_VDAC_DEV_GRP, TWL4030_VDAC_DEV_GRP);
++
++	return 0;
++}
++
++static void overo_panel_disable_tv(struct omap_dss_device *dssdev)
++{
++	twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00,
++			TWL4030_VDAC_DEDICATED);
++	twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00,
++			TWL4030_VDAC_DEV_GRP);
++}
++
++static struct omap_dss_device overo_tv_device = {
++	.name = "tv",
++	.driver_name = "venc",
++	.type = OMAP_DISPLAY_TYPE_VENC,
++	.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
++	.platform_enable = overo_panel_enable_tv,
++	.platform_disable = overo_panel_disable_tv,
++};
++
++static int overo_panel_enable_lcd(struct omap_dss_device *dssdev)
++{
++	if (dvi_enabled) {
++		printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
++		return -EINVAL;
++	}
++
++	gpio_set_value(OVERO_GPIO_LCD_EN, 1);
++	gpio_set_value(OVERO_GPIO_LCD_BL, 1);
++	lcd_enabled = 1;
++	return 0;
++}
++
++static void overo_panel_disable_lcd(struct omap_dss_device *dssdev)
++{
++	gpio_set_value(OVERO_GPIO_LCD_EN, 0);
++	gpio_set_value(OVERO_GPIO_LCD_BL, 0);
++	lcd_enabled = 0;
++}
++
++#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
++	defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
++static struct omap_dss_device overo_lcd35_device = {
++	.type			= OMAP_DISPLAY_TYPE_DPI,
++	.name			= "lcd35",
++	.driver_name		= "lgphilips_lb035q02_panel",
++	.phy.dpi.data_lines	= 24,
++	.panel.recommended_bpp	= 16,
++	.platform_enable	= overo_panel_enable_lcd,
++	.platform_disable	= overo_panel_disable_lcd,
++};
++#endif
++
++#if defined(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C) || \
++	defined(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C_MODULE)
++static struct omap_dss_device overo_lcd43_device = {
++	.type			= OMAP_DISPLAY_TYPE_DPI,
++	.name			= "lcd43",
++	.driver_name		= "samsung_lte_panel",
++	.phy.dpi.data_lines	= 24,
++	.panel.recommended_bpp	= 16,
++	.platform_enable	= overo_panel_enable_lcd,
++	.platform_disable	= overo_panel_disable_lcd,
++};
++#endif
++
++static struct omap_dss_device *overo_dss_devices[] = {
++	&overo_dvi_device,
++	&overo_tv_device,
++#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
++	defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
++	&overo_lcd35_device,
++#endif
++#if defined(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C) || \
++	defined(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C_MODULE)
++	&overo_lcd43_device,
++#endif
++};
++
++static struct omap_dss_board_info overo_dss_data = {
++	.num_devices	= ARRAY_SIZE(overo_dss_devices),
++	.devices	= overo_dss_devices,
++	.default_device	= &overo_dvi_device,
++};
++
++static struct platform_device overo_dss_device = {
++	.name          = "omapdss",
++	.id            = -1,
++	.dev            = {
++		.platform_data = &overo_dss_data,
++	},
++};
++
++static struct regulator_consumer_supply overo_vdda_dac_supply = {
++	.supply		= "vdda_dac",
++	.dev		= &overo_dss_device.dev,
++};
++
++static struct regulator_consumer_supply overo_vdds_dsi_supply = {
++	.supply		= "vdds_dsi",
++	.dev		= &overo_dss_device.dev,
++};
++
+ static struct mtd_partition overo_nand_partitions[] = {
+ 	{
+ 		.name           = "xloader",
+@@ -379,6 +536,37 @@ static struct regulator_init_data overo_vmmc1 = {
+ 	.consumer_supplies	= &overo_vmmc1_supply,
+ };
+ 
++/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
++static struct regulator_init_data overo_vdac = {
++	.constraints = {
++		.min_uV			= 1800000,
++		.max_uV			= 1800000,
++		.valid_modes_mask	= REGULATOR_MODE_NORMAL
++					| REGULATOR_MODE_STANDBY,
++		.valid_ops_mask		= REGULATOR_CHANGE_MODE
++					| REGULATOR_CHANGE_STATUS,
++	},
++	.num_consumer_supplies	= 1,
++	.consumer_supplies	= &overo_vdda_dac_supply,
++};
++
++/* VPLL2 for digital video outputs */
++static struct regulator_init_data overo_vpll2 = {
++	.constraints = {
++		.name			= "VDVI",
++		.min_uV			= 1800000,
++		.max_uV			= 1800000,
++		.valid_modes_mask	= REGULATOR_MODE_NORMAL
++					| REGULATOR_MODE_STANDBY,
++		.valid_ops_mask		= REGULATOR_CHANGE_MODE
++					| REGULATOR_CHANGE_STATUS,
++	},
++	.num_consumer_supplies	= 1,
++	.consumer_supplies	= &overo_vdds_dsi_supply,
++};
++
++/* mmc2 (WLAN) and Bluetooth don't use twl4030 regulators */
++
+ static struct twl4030_codec_audio_data overo_audio_data = {
+ 	.audio_mclk = 26000000,
+ };
+@@ -402,6 +590,8 @@ static struct twl4030_platform_data overo_twldata = {
+ 	.usb		= &overo_usb_data,
+ 	.codec		= &overo_codec_data,
+ 	.vmmc1		= &overo_vmmc1,
++	.vdac		= &overo_vdac,
++	.vpll2		= &overo_vpll2,
+ };
+ 
+ static struct i2c_board_info __initdata overo_i2c_boardinfo[] = {
+@@ -422,31 +612,50 @@ static int __init overo_i2c_init(void)
+ 	return 0;
+ }
+ 
+-static struct platform_device overo_lcd_device = {
+-	.name		= "overo_lcd",
+-	.id		= -1,
+-};
+-
+-static struct omap_lcd_config overo_lcd_config __initdata = {
+-	.ctrl_name	= "internal",
++static struct spi_board_info overo_spi_board_info[] __initdata = {
++#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
++	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
++	{
++		.modalias		= "ads7846",
++		.bus_num		= 1,
++		.chip_select		= 0,
++		.max_speed_hz		= 1500000,
++		.controller_data	= &ads7846_mcspi_config,
++		.irq			= OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN),
++		.platform_data		= &ads7846_config,
++	},
++#endif
++#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
++	defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
++	{
++		.modalias		= "lgphilips_lb035q02_panel-spi",
++		.bus_num		= 1,
++		.chip_select		= 1,
++		.max_speed_hz		= 500000,
++		.mode			= SPI_MODE_3,
++	},
++#endif
+ };
+ 
+-static struct omap_board_config_kernel overo_config[] __initdata = {
+-	{ OMAP_TAG_LCD,		&overo_lcd_config },
+-};
++static int __init overo_spi_init(void)
++{
++	overo_ads7846_init();
++	spi_register_board_info(overo_spi_board_info,
++			ARRAY_SIZE(overo_spi_board_info));
++	return 0;
++}
+ 
+ static void __init overo_init_irq(void)
+ {
+-	omap_board_config = overo_config;
+-	omap_board_config_size = ARRAY_SIZE(overo_config);
+ 	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+-			     mt46h32m32lf6_sdrc_params, NULL, NULL, NULL);
++			     NULL, omap35x_mpu_rate_table,
++			     omap35x_dsp_rate_table, omap35x_l3_rate_table);
+ 	omap_init_irq();
+ 	omap_gpio_init();
+ }
+ 
+ static struct platform_device *overo_devices[] __initdata = {
+-	&overo_lcd_device,
++	&overo_dss_device,
+ };
+ 
+ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+@@ -477,8 +686,9 @@ static void __init overo_init(void)
+ 	overo_flash_init();
+ 	usb_musb_init();
+ 	usb_ehci_init(&ehci_pdata);
+-	overo_ads7846_init();
++	overo_spi_init();
+ 	overo_init_smsc911x();
++	overo_display_init();
+ 
+ 	/* Ensure SDRC pins are mux'd for self-refresh */
+ 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0027-twl4030-madc-adjust-for-twl4030-twl-api-changes.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0027-twl4030-madc-adjust-for-twl4030-twl-api-changes.patch
new file mode 100644
index 0000000..3b741c0
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0027-twl4030-madc-adjust-for-twl4030-twl-api-changes.patch
@@ -0,0 +1,85 @@
+From ea14002af533b155db59e15b5bccc6374aa8a5d1 Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@dominion.thruhere.net>
+Date: Mon, 15 Feb 2010 14:20:51 +0100
+Subject: [PATCH 27/45] twl4030-madc: adjust for twl4030 -> twl api changes
+
+---
+ drivers/mfd/twl4030-madc.c |   18 +++++++++---------
+ 1 files changed, 9 insertions(+), 9 deletions(-)
+
+diff --git a/drivers/mfd/twl4030-madc.c b/drivers/mfd/twl4030-madc.c
+index 7d83ab8..de6bdcd 100644
+--- a/drivers/mfd/twl4030-madc.c
++++ b/drivers/mfd/twl4030-madc.c
+@@ -29,7 +29,7 @@
+ #include <linux/fs.h>
+ #include <linux/platform_device.h>
+ #include <linux/miscdevice.h>
+-#include <linux/i2c/twl4030.h>
++#include <linux/i2c/twl.h>
+ #include <linux/i2c/twl4030-madc.h>
+ 
+ #include <asm/uaccess.h>
+@@ -73,7 +73,7 @@ static int twl4030_madc_read(struct twl4030_madc_data *madc, u8 reg)
+ 	int ret;
+ 	u8 val;
+ 
+-	ret = twl4030_i2c_read_u8(TWL4030_MODULE_MADC, &val, reg);
++	ret = twl_i2c_read_u8(TWL4030_MODULE_MADC, &val, reg);
+ 	if (ret) {
+ 		dev_dbg(madc->dev, "unable to read register 0x%X\n", reg);
+ 		return ret;
+@@ -86,7 +86,7 @@ static void twl4030_madc_write(struct twl4030_madc_data *madc, u8 reg, u8 val)
+ {
+ 	int ret;
+ 
+-	ret = twl4030_i2c_write_u8(TWL4030_MODULE_MADC, val, reg);
++	ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, val, reg);
+ 	if (ret)
+ 		dev_err(madc->dev, "unable to write register 0x%X\n", reg);
+ }
+@@ -342,13 +342,13 @@ static int twl4030_madc_set_current_generator(struct twl4030_madc_data *madc,
+ 	if (chan > 1)
+ 		return EINVAL;
+ 
+-	ret = twl4030_i2c_read_u8(TWL4030_MODULE_MAIN_CHARGE,
++	ret = twl_i2c_read_u8(TWL4030_MODULE_MAIN_CHARGE,
+ 				  &regval, TWL4030_BCI_BCICTL1);
+ 	if (on)
+ 		regval |= (chan) ? TWL4030_BCI_ITHEN : TWL4030_BCI_TYPEN;
+ 	else
+ 		regval &= (chan) ? ~TWL4030_BCI_ITHEN : ~TWL4030_BCI_TYPEN;
+-	ret = twl4030_i2c_write_u8(TWL4030_MODULE_MAIN_CHARGE,
++	ret = twl_i2c_write_u8(TWL4030_MODULE_MAIN_CHARGE,
+ 				   regval, TWL4030_BCI_BCICTL1);
+ 
+ 	return ret;
+@@ -453,21 +453,21 @@ static int __init twl4030_madc_probe(struct platform_device *pdev)
+ 	twl4030_madc_set_current_generator(madc, 0, 1);
+ 
+ 	/* Enable ADCIN3 through 6 */
+-	ret = twl4030_i2c_read_u8(TWL4030_MODULE_USB,
++	ret = twl_i2c_read_u8(TWL4030_MODULE_USB,
+ 				  &regval, TWL4030_USB_CARKIT_ANA_CTRL);
+ 
+ 	regval |= TWL4030_USB_SEL_MADC_MCPC;
+ 
+-	ret = twl4030_i2c_write_u8(TWL4030_MODULE_USB,
++	ret = twl_i2c_write_u8(TWL4030_MODULE_USB,
+ 				regval, TWL4030_USB_CARKIT_ANA_CTRL);
+ 
+ 
+-	ret = twl4030_i2c_read_u8(TWL4030_MODULE_MAIN_CHARGE,
++	ret = twl_i2c_read_u8(TWL4030_MODULE_MAIN_CHARGE,
+ 				  &regval, TWL4030_BCI_BCICTL1);
+ 
+ 	regval |= TWL4030_BCI_MESBAT;
+ 
+-	ret = twl4030_i2c_write_u8(TWL4030_MODULE_MAIN_CHARGE,
++	ret = twl_i2c_write_u8(TWL4030_MODULE_MAIN_CHARGE,
+ 				   regval, TWL4030_BCI_BCICTL1);
+ 
+ 	ret = request_irq(platform_get_irq(pdev, 0), twl4030_madc_irq_handler,
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0028-OMAP-DSS2-Re-add-support-for-Samsung-lte430wq-f0c-pa.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0028-OMAP-DSS2-Re-add-support-for-Samsung-lte430wq-f0c-pa.patch
new file mode 100644
index 0000000..9857d61
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0028-OMAP-DSS2-Re-add-support-for-Samsung-lte430wq-f0c-pa.patch
@@ -0,0 +1,161 @@
+From fea02525d71cc64fb84f011768a5f5d0bb248dc7 Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@dominion.thruhere.net>
+Date: Mon, 15 Feb 2010 14:38:00 +0100
+Subject: [PATCH 28/45] OMAP: DSS2: (Re)add support for Samsung lte430wq-f0c panel
+
+---
+ drivers/video/omap2/displays/Kconfig               |    6 +
+ drivers/video/omap2/displays/Makefile              |    1 +
+ .../omap2/displays/panel-samsung-lte430wq-f0c.c    |  113 ++++++++++++++++++++
+ 3 files changed, 120 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/video/omap2/displays/panel-samsung-lte430wq-f0c.c
+
+diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig
+index 4ce47dd..4229a28 100644
+--- a/drivers/video/omap2/displays/Kconfig
++++ b/drivers/video/omap2/displays/Kconfig
+@@ -7,6 +7,12 @@ config PANEL_GENERIC
+ 	  Generic panel driver.
+ 	  Used for DVI output for Beagle and OMAP3 SDP.
+ 
++config PANEL_SAMSUNG_LTE430WQ_F0C
++        tristate "Samsung LTE430WQ-F0C LCD Panel"
++        depends on OMAP2_DSS
++        help
++          LCD Panel used on Overo Palo43
++
+ config PANEL_SHARP_LS037V7DW01
+         tristate "Sharp LS037V7DW01 LCD Panel"
+         depends on OMAP2_DSS
+diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile
+index 8f3d0ad..9317445 100644
+--- a/drivers/video/omap2/displays/Makefile
++++ b/drivers/video/omap2/displays/Makefile
+@@ -1,4 +1,5 @@
+ obj-$(CONFIG_PANEL_GENERIC) += panel-generic.o
++obj-$(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C) += panel-samsung-lte430wq-f0c.o
+ obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
+ obj-$(CONFIG_PANEL_SHARP_LQ043T1DG01) += panel-sharp-lq043t1dg01.o
+ 
+diff --git a/drivers/video/omap2/displays/panel-samsung-lte430wq-f0c.c b/drivers/video/omap2/displays/panel-samsung-lte430wq-f0c.c
+new file mode 100644
+index 0000000..3f0477e
+--- /dev/null
++++ b/drivers/video/omap2/displays/panel-samsung-lte430wq-f0c.c
+@@ -0,0 +1,113 @@
++/*
++ * LCD panel driver for Samsung LTE430WQ-F0C
++ *
++ * Author: Steve Sakoman <steve@sakoman.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program.  If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#include <linux/module.h>
++#include <linux/delay.h>
++
++#include <plat/display.h>
++
++static struct omap_video_timings samsung_lte_timings = {
++	.x_res = 480,
++	.y_res = 272,
++
++	.pixel_clock	= 9200,
++
++	.hsw		= 41,
++	.hfp		= 8,
++	.hbp		= 45-41,
++
++	.vsw		= 10,
++	.vfp		= 4,
++	.vbp		= 12-10,
++};
++
++static int samsung_lte_panel_probe(struct omap_dss_device *dssdev)
++{
++	dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
++		OMAP_DSS_LCD_IHS;
++	dssdev->panel.timings = samsung_lte_timings;
++
++	return 0;
++}
++
++static void samsung_lte_panel_remove(struct omap_dss_device *dssdev)
++{
++}
++
++static int samsung_lte_panel_enable(struct omap_dss_device *dssdev)
++{
++	int r = 0;
++
++	/* wait couple of vsyncs until enabling the LCD */
++	msleep(50);
++
++	if (dssdev->platform_enable)
++		r = dssdev->platform_enable(dssdev);
++
++	return r;
++}
++
++static void samsung_lte_panel_disable(struct omap_dss_device *dssdev)
++{
++	if (dssdev->platform_disable)
++		dssdev->platform_disable(dssdev);
++
++	/* wait at least 5 vsyncs after disabling the LCD */
++
++	msleep(100);
++}
++
++static int samsung_lte_panel_suspend(struct omap_dss_device *dssdev)
++{
++	samsung_lte_panel_disable(dssdev);
++	return 0;
++}
++
++static int samsung_lte_panel_resume(struct omap_dss_device *dssdev)
++{
++	return samsung_lte_panel_enable(dssdev);
++}
++
++static struct omap_dss_driver samsung_lte_driver = {
++	.probe		= samsung_lte_panel_probe,
++	.remove		= samsung_lte_panel_remove,
++
++	.enable		= samsung_lte_panel_enable,
++	.disable	= samsung_lte_panel_disable,
++	.suspend	= samsung_lte_panel_suspend,
++	.resume		= samsung_lte_panel_resume,
++
++	.driver         = {
++		.name   = "samsung_lte_panel",
++		.owner  = THIS_MODULE,
++	},
++};
++
++static int __init samsung_lte_panel_drv_init(void)
++{
++	return omap_dss_register_driver(&samsung_lte_driver);
++}
++
++static void __exit samsung_lte_panel_drv_exit(void)
++{
++	omap_dss_unregister_driver(&samsung_lte_driver);
++}
++
++module_init(samsung_lte_panel_drv_init);
++module_exit(samsung_lte_panel_drv_exit);
++MODULE_LICENSE("GPL");
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0029-OMAP-DSS2-Add-support-for-LG-Philips-LB035Q02-panel.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0029-OMAP-DSS2-Add-support-for-LG-Philips-LB035Q02-panel.patch
new file mode 100644
index 0000000..e07a1ac
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0029-OMAP-DSS2-Add-support-for-LG-Philips-LB035Q02-panel.patch
@@ -0,0 +1,254 @@
+From 528f8c676d21e4eea4599226168f25e684f99eae Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Thu, 17 Dec 2009 15:05:30 -0800
+Subject: [PATCH 29/45] OMAP: DSS2: Add support for LG Philips LB035Q02 panel
+
+---
+ drivers/video/omap2/displays/Kconfig               |    6 +
+ drivers/video/omap2/displays/Makefile              |    1 +
+ .../omap2/displays/panel-lgphilips-lb035q02.c      |  206 ++++++++++++++++++++
+ 3 files changed, 213 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/video/omap2/displays/panel-lgphilips-lb035q02.c
+
+diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig
+index 4229a28..875250a 100644
+--- a/drivers/video/omap2/displays/Kconfig
++++ b/drivers/video/omap2/displays/Kconfig
+@@ -7,6 +7,12 @@ config PANEL_GENERIC
+ 	  Generic panel driver.
+ 	  Used for DVI output for Beagle and OMAP3 SDP.
+ 
++config PANEL_LGPHILIPS_LB035Q02
++	tristate "LG.Philips LB035Q02 LCD Panel"
++	depends on OMAP2_DSS
++	help
++	  LCD Panel used on Overo Palo35
++
+ config PANEL_SAMSUNG_LTE430WQ_F0C
+         tristate "Samsung LTE430WQ-F0C LCD Panel"
+         depends on OMAP2_DSS
+diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile
+index 9317445..f8e6c52 100644
+--- a/drivers/video/omap2/displays/Makefile
++++ b/drivers/video/omap2/displays/Makefile
+@@ -1,4 +1,5 @@
+ obj-$(CONFIG_PANEL_GENERIC) += panel-generic.o
++obj-$(CONFIG_PANEL_LGPHILIPS_LB035Q02) += panel-lgphilips-lb035q02.o
+ obj-$(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C) += panel-samsung-lte430wq-f0c.o
+ obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
+ obj-$(CONFIG_PANEL_SHARP_LQ043T1DG01) += panel-sharp-lq043t1dg01.o
+diff --git a/drivers/video/omap2/displays/panel-lgphilips-lb035q02.c b/drivers/video/omap2/displays/panel-lgphilips-lb035q02.c
+new file mode 100644
+index 0000000..22dc865
+--- /dev/null
++++ b/drivers/video/omap2/displays/panel-lgphilips-lb035q02.c
+@@ -0,0 +1,206 @@
++/*
++ * LCD panel driver for LG.Philips LB035Q02
++ *
++ * Author: Steve Sakoman <steve@sakoman.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program.  If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#include <linux/module.h>
++#include <linux/delay.h>
++#include <linux/spi/spi.h>
++
++#include <plat/display.h>
++
++static struct spi_device	*spidev;
++
++static struct omap_video_timings lb035q02_timings = {
++	.x_res = 320,
++	.y_res = 240,
++
++	.pixel_clock	= 6500,
++
++	.hsw		= 2,
++	.hfp		= 20,
++	.hbp		= 68,
++
++	.vsw		= 2,
++	.vfp		= 4,
++	.vbp		= 18,
++};
++
++static int lb035q02_panel_probe(struct omap_dss_device *dssdev)
++{
++	dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
++		OMAP_DSS_LCD_IHS;
++	dssdev->panel.timings = lb035q02_timings;
++
++	return 0;
++}
++
++static void lb035q02_panel_remove(struct omap_dss_device *dssdev)
++{
++}
++
++static int lb035q02_write_reg(u8 reg, u16 val)
++{
++	struct spi_message msg;
++	struct spi_transfer index_xfer = {
++		.len		= 3,
++		.cs_change	= 1,
++	};
++	struct spi_transfer value_xfer = {
++		.len		= 3,
++	};
++	u8	buffer[16];
++
++	spi_message_init(&msg);
++
++	/* register index */
++	buffer[0] = 0x70;
++	buffer[1] = 0x00;
++	buffer[2] = reg & 0x7f;
++	index_xfer.tx_buf = buffer;
++	spi_message_add_tail(&index_xfer, &msg);
++
++	/* register value */
++	buffer[4] = 0x72;
++	buffer[5] = val >> 8;
++	buffer[6] = val;
++	value_xfer.tx_buf = buffer + 4;
++	spi_message_add_tail(&value_xfer, &msg);
++
++	return spi_sync(spidev, &msg);
++}
++
++static int lb035q02_panel_enable(struct omap_dss_device *dssdev)
++{
++	int r = 0;
++
++	pr_info("lgphilips_lb035q02: panel_enable: 0x%08x\n", spidev);
++	/* wait couple of vsyncs until enabling the LCD */
++	msleep(50);
++
++	if (dssdev->platform_enable)
++		r = dssdev->platform_enable(dssdev);
++
++	/* Panel init sequence from page 28 of the spec */
++	lb035q02_write_reg(0x01, 0x6300);
++	lb035q02_write_reg(0x02, 0x0200);
++	lb035q02_write_reg(0x03, 0x0177);
++	lb035q02_write_reg(0x04, 0x04c7);
++	lb035q02_write_reg(0x05, 0xffc0);
++	lb035q02_write_reg(0x06, 0xe806);
++	lb035q02_write_reg(0x0a, 0x4008);
++	lb035q02_write_reg(0x0b, 0x0000);
++	lb035q02_write_reg(0x0d, 0x0030);
++	lb035q02_write_reg(0x0e, 0x2800);
++	lb035q02_write_reg(0x0f, 0x0000);
++	lb035q02_write_reg(0x16, 0x9f80);
++	lb035q02_write_reg(0x17, 0x0a0f);
++	lb035q02_write_reg(0x1e, 0x00c1);
++	lb035q02_write_reg(0x30, 0x0300);
++	lb035q02_write_reg(0x31, 0x0007);
++	lb035q02_write_reg(0x32, 0x0000);
++	lb035q02_write_reg(0x33, 0x0000);
++	lb035q02_write_reg(0x34, 0x0707);
++	lb035q02_write_reg(0x35, 0x0004);
++	lb035q02_write_reg(0x36, 0x0302);
++	lb035q02_write_reg(0x37, 0x0202);
++	lb035q02_write_reg(0x3a, 0x0a0d);
++	lb035q02_write_reg(0x3b, 0x0806);
++
++	return r;
++}
++
++static void lb035q02_panel_disable(struct omap_dss_device *dssdev)
++{
++	if (dssdev->platform_disable)
++		dssdev->platform_disable(dssdev);
++
++	/* wait at least 5 vsyncs after disabling the LCD */
++
++	msleep(100);
++}
++
++static int lb035q02_panel_suspend(struct omap_dss_device *dssdev)
++{
++	pr_info("lgphilips_lb035q02: panel_suspend\n");
++	lb035q02_panel_disable(dssdev);
++	return 0;
++}
++
++static int lb035q02_panel_resume(struct omap_dss_device *dssdev)
++{
++	pr_info("lgphilips_lb035q02: panel_resume\n");
++	return lb035q02_panel_enable(dssdev);
++}
++
++static struct omap_dss_driver lb035q02_driver = {
++	.probe		= lb035q02_panel_probe,
++	.remove		= lb035q02_panel_remove,
++
++	.enable		= lb035q02_panel_enable,
++	.disable	= lb035q02_panel_disable,
++	.suspend	= lb035q02_panel_suspend,
++	.resume		= lb035q02_panel_resume,
++
++	.driver         = {
++		.name   = "lgphilips_lb035q02_panel",
++		.owner  = THIS_MODULE,
++	},
++};
++
++static int __devinit lb035q02_panel_spi_probe(struct spi_device *spi)
++{
++	spidev = spi;
++	return 0;
++}
++
++static int __devexit lb035q02_panel_spi_remove(struct spi_device *spi)
++{
++	return 0;
++}
++
++static struct spi_driver lb035q02_spi_driver = {
++	.driver		= {
++		.name	= "lgphilips_lb035q02_panel-spi",
++		.owner	= THIS_MODULE,
++	},
++	.probe		= lb035q02_panel_spi_probe,
++	.remove		= __devexit_p (lb035q02_panel_spi_remove),
++};
++
++static int __init lb035q02_panel_drv_init(void)
++{
++	int ret;
++	ret = spi_register_driver(&lb035q02_spi_driver);
++	if (ret != 0)
++		pr_err("lgphilips_lb035q02: Unable to register SPI driver: %d\n", ret);
++
++	ret = omap_dss_register_driver(&lb035q02_driver);
++	if (ret != 0)
++		pr_err("lgphilips_lb035q02: Unable to register panel driver: %d\n", ret);
++
++	return ret;
++}
++
++static void __exit lb035q02_panel_drv_exit(void)
++{
++	spi_unregister_driver(&lb035q02_spi_driver);
++	omap_dss_unregister_driver(&lb035q02_driver);
++}
++
++module_init(lb035q02_panel_drv_init);
++module_exit(lb035q02_panel_drv_exit);
++MODULE_LICENSE("GPL");
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0030-Fix-for-bus-width-which-improves-SD-card-s-peformanc.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0030-Fix-for-bus-width-which-improves-SD-card-s-peformanc.patch
new file mode 100644
index 0000000..a19b3be
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0030-Fix-for-bus-width-which-improves-SD-card-s-peformanc.patch
@@ -0,0 +1,32 @@
+From 5615ccd89eb521c2365992bdb7c08879fe039daa Mon Sep 17 00:00:00 2001
+From: Kishore Kadiyala <kishore.kadiyala@ti.com>
+Date: Wed, 17 Feb 2010 19:34:47 +0530
+Subject: [PATCH 30/45] Fix for bus width which improves SD card's peformance.
+
+This patch fixes bus width which improves peformance for SD cards.
+OMAP-MMC controller's can support maximum bus width of '8'.
+when bus width is mentioned as "8" in controller data,the SD
+stack will check whether bus width is "4" and if not it will
+set bus width to "1" and there by degrading peformance.
+
+Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
+---
+ drivers/mmc/host/omap_hsmmc.c |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
+index fa94580..9646a75 100644
+--- a/drivers/mmc/host/omap_hsmmc.c
++++ b/drivers/mmc/host/omap_hsmmc.c
+@@ -1776,7 +1776,7 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev)
+ 		     MMC_CAP_WAIT_WHILE_BUSY;
+ 
+ 	if (mmc_slot(host).wires >= 8)
+-		mmc->caps |= MMC_CAP_8_BIT_DATA;
++		mmc->caps |= (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA);
+ 	else if (mmc_slot(host).wires >= 4)
+ 		mmc->caps |= MMC_CAP_4_BIT_DATA;
+ 
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0031-ARM-VFP-add-support-to-sync-the-VFP-state-of-the-cur.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0031-ARM-VFP-add-support-to-sync-the-VFP-state-of-the-cur.patch
new file mode 100644
index 0000000..85952f2
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0031-ARM-VFP-add-support-to-sync-the-VFP-state-of-the-cur.patch
@@ -0,0 +1,109 @@
+From 14b44ddc3119dc497b4d17901884af4f068c5ada Mon Sep 17 00:00:00 2001
+From: Imre Deak <imre.deak@nokia.com>
+Date: Thu, 4 Feb 2010 21:38:02 +0200
+Subject: [PATCH 31/45] ARM: VFP: add support to sync the VFP state of the current thread
+
+ARM: VFP: add support to sync the VFP state of the current thread
+
+So far vfp_sync_state worked only for threads other than the current
+one. This worked for tracing other threads, but not for PTRACE_TRACEME.
+Syncing for the current thread will also be needed by an upcoming patch
+adding support for VFP context save / restore around signal handlers.
+
+For SMP we need get_cpu now, since we have to protect the FPEXC
+register, other than this things remained the same for threads other
+than the current.
+
+Signed-off-by: Imre Deak <imre.deak@nokia.com>
+Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
+---
+ arch/arm/vfp/vfpmodule.c |   46 +++++++++++++++++++++++++++++++---------------
+ 1 files changed, 31 insertions(+), 15 deletions(-)
+
+diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
+index aed05bc..f28f45b 100644
+--- a/arch/arm/vfp/vfpmodule.c
++++ b/arch/arm/vfp/vfpmodule.c
+@@ -423,12 +423,19 @@ static inline void vfp_pm_init(void) { }
+ #endif /* CONFIG_PM */
+ 
+ /*
+- * Synchronise the hardware VFP state of a thread other than current with the
+- * saved one. This function is used by the ptrace mechanism.
++ * Synchronise the hardware VFP state of a thread with the saved one.
++ * This function is used by the ptrace mechanism and the signal handler path.
+  */
+-#ifdef CONFIG_SMP
+ void vfp_sync_state(struct thread_info *thread)
+ {
++	unsigned int cpu = get_cpu();
++	u32 fpexc = fmrx(FPEXC);
++	int vfp_enabled;
++	int self;
++
++	vfp_enabled = fpexc & FPEXC_EN;
++	self = thread == current_thread_info();
++#ifdef CONFIG_SMP
+ 	/*
+ 	 * On SMP systems, the VFP state is automatically saved at every
+ 	 * context switch. We mark the thread VFP state as belonging to a
+@@ -436,18 +443,22 @@ void vfp_sync_state(struct thread_info *thread)
+ 	 * needed.
+ 	 */
+ 	thread->vfpstate.hard.cpu = NR_CPUS;
+-}
+-#else
+-void vfp_sync_state(struct thread_info *thread)
+-{
+-	unsigned int cpu = get_cpu();
+-	u32 fpexc = fmrx(FPEXC);
+-
+ 	/*
+-	 * If VFP is enabled, the previous state was already saved and
+-	 * last_VFP_context updated.
++	 * Only the current thread's saved VFP context can be out-of-date.
++	 * For others there is nothing else to do, since we already ensured
++	 * force loading above.
+ 	 */
+-	if (fpexc & FPEXC_EN)
++	if (!self)
++		goto out;
++#endif
++	/*
++	 * If the VFP is enabled only the current thread's saved VFP
++	 * context can get out-of-date. For other threads the context
++	 * was updated when the current thread started to use the VFP.
++	 * This also means that the context will be reloaded next time
++	 * the thread uses the VFP, so no need to enforce it.
++	 */
++	if (vfp_enabled && !self)
+ 		goto out;
+ 
+ 	if (!last_VFP_context[cpu])
+@@ -456,8 +467,14 @@ void vfp_sync_state(struct thread_info *thread)
+ 	/*
+ 	 * Save the last VFP state on this CPU.
+ 	 */
+-	fmxr(FPEXC, fpexc | FPEXC_EN);
++	if (!vfp_enabled)
++		fmxr(FPEXC, fpexc | FPEXC_EN);
+ 	vfp_save_state(last_VFP_context[cpu], fpexc);
++	/*
++	 * Disable VFP in case it was enabled so that the force reload
++	 * can happen.
++	 */
++	fpexc &= ~FPEXC_EN;
+ 	fmxr(FPEXC, fpexc);
+ 
+ 	/*
+@@ -469,7 +486,6 @@ void vfp_sync_state(struct thread_info *thread)
+ out:
+ 	put_cpu();
+ }
+-#endif
+ 
+ #include <linux/smp.h>
+ 
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0032-ARM-VFP-preserve-the-HW-context-when-calling-signal-.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0032-ARM-VFP-preserve-the-HW-context-when-calling-signal-.patch
new file mode 100644
index 0000000..658c975
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0032-ARM-VFP-preserve-the-HW-context-when-calling-signal-.patch
@@ -0,0 +1,211 @@
+From 7cdc806843b28f0f35dd41fb79aac815773a3550 Mon Sep 17 00:00:00 2001
+From: Imre Deak <imre.deak@nokia.com>
+Date: Thu, 4 Feb 2010 21:38:30 +0200
+Subject: [PATCH 32/45] ARM: VFP: preserve the HW context when calling signal handlers
+
+ARM: VFP: preserve the HW context when calling signal handlers
+
+Signal handlers can use floating point, so prevent them to corrupt
+the main thread's VFP context. So far there were two signal stack
+frame formats defined based on the VFP implementation, but the user
+struct used for ptrace covers all posibilities, so use it for the
+signal stack too. This patch extends the user struct and leaves
+its magic number the same, in the hope that user space code does
+not depend on its size and can parse the original regs w/o
+problems.
+
+Support to save / restore the exception registers was added by
+Will Deacon.
+
+Signed-off-by: Imre Deak <imre.deak@nokia.com>
+Signed-off-by: Will Deacon <will.deacon@arm.com>
+Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
+---
+ arch/arm/include/asm/ucontext.h |   19 +++-----
+ arch/arm/include/asm/user.h     |    3 +
+ arch/arm/kernel/signal.c        |   91 +++++++++++++++++++++++++++++++++++++--
+ 3 files changed, 97 insertions(+), 16 deletions(-)
+
+diff --git a/arch/arm/include/asm/ucontext.h b/arch/arm/include/asm/ucontext.h
+index bf65e9f..1c3236b 100644
+--- a/arch/arm/include/asm/ucontext.h
++++ b/arch/arm/include/asm/ucontext.h
+@@ -59,23 +59,18 @@ struct iwmmxt_sigframe {
+ #endif /* CONFIG_IWMMXT */
+ 
+ #ifdef CONFIG_VFP
+-#if __LINUX_ARM_ARCH__ < 6
+-/* For ARM pre-v6, we use fstmiax and fldmiax.  This adds one extra
+- * word after the registers, and a word of padding at the end for
+- * alignment.  */
+ #define VFP_MAGIC		0x56465001
+-#define VFP_STORAGE_SIZE	152
+-#else
+-#define VFP_MAGIC		0x56465002
+-#define VFP_STORAGE_SIZE	144
+-#endif
+ 
+ struct vfp_sigframe
+ {
+ 	unsigned long		magic;
+ 	unsigned long		size;
+-	union vfp_state		storage;
+-};
++	struct user_vfp		ufp;
++} __attribute__((__aligned__(8)));
++
++/* 8 byte for magic and size, 272 byte for ufp */
++#define VFP_STORAGE_SIZE	sizeof(struct vfp_sigframe)
++
+ #endif /* CONFIG_VFP */
+ 
+ /*
+@@ -91,7 +86,7 @@ struct aux_sigframe {
+ #ifdef CONFIG_IWMMXT
+ 	struct iwmmxt_sigframe	iwmmxt;
+ #endif
+-#if 0 && defined CONFIG_VFP /* Not yet saved.  */
++#ifdef CONFIG_VFP
+ 	struct vfp_sigframe	vfp;
+ #endif
+ 	/* Something that isn't a valid magic number for any coprocessor.  */
+diff --git a/arch/arm/include/asm/user.h b/arch/arm/include/asm/user.h
+index df95e05..ea7e44d 100644
+--- a/arch/arm/include/asm/user.h
++++ b/arch/arm/include/asm/user.h
+@@ -88,6 +88,9 @@ struct user{
+ struct user_vfp {
+ 	unsigned long long fpregs[32];
+ 	unsigned long fpscr;
++	unsigned long fpexc;
++	unsigned long fpinst;
++	unsigned long fpinst2;
+ };
+ 
+ #endif /* _ARM_USER_H */
+diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
+index e7714f3..6a36851 100644
+--- a/arch/arm/kernel/signal.c
++++ b/arch/arm/kernel/signal.c
+@@ -18,6 +18,7 @@
+ #include <asm/cacheflush.h>
+ #include <asm/ucontext.h>
+ #include <asm/unistd.h>
++#include <asm/vfp.h>
+ 
+ #include "ptrace.h"
+ #include "signal.h"
+@@ -175,6 +176,88 @@ static int restore_iwmmxt_context(struct iwmmxt_sigframe *frame)
+ 
+ #endif
+ 
++#ifdef CONFIG_VFP
++
++static int preserve_vfp_context(struct vfp_sigframe __user *frame)
++{
++	struct thread_info *thread = current_thread_info();
++	struct vfp_hard_struct *h = &thread->vfpstate.hard;
++	const unsigned long magic = VFP_MAGIC;
++	const unsigned long size = VFP_STORAGE_SIZE;
++	int err = 0;
++
++	vfp_sync_state(thread);
++	__put_user_error(magic, &frame->magic, err);
++	__put_user_error(size, &frame->size, err);
++
++	/*
++	 * Copy the floating point registers. There can be unused
++	 * registers see asm/hwcap.h for details.
++	 */
++	err |= __copy_to_user(&frame->ufp.fpregs, &h->fpregs,
++			      sizeof(h->fpregs));
++	/*
++	 * Copy the status and control register.
++	 */
++	__put_user_error(h->fpscr, &frame->ufp.fpscr, err);
++
++	/*
++	 * Copy the exception registers.
++	 */
++	__put_user_error(h->fpexc, &frame->ufp.fpexc, err);
++	__put_user_error(h->fpinst, &frame->ufp.fpinst, err);
++	__put_user_error(h->fpinst2, &frame->ufp.fpinst2, err);
++
++	return err ? -EFAULT : 0;
++}
++
++static int restore_vfp_context(struct vfp_sigframe __user *frame)
++{
++	struct thread_info *thread = current_thread_info();
++	struct vfp_hard_struct *h = &thread->vfpstate.hard;
++	unsigned long magic;
++	unsigned long size;
++	unsigned long fpexc;
++	int err = 0;
++
++	vfp_sync_state(thread);
++	__get_user_error(magic, &frame->magic, err);
++	__get_user_error(size, &frame->size, err);
++
++	if (err)
++		return -EFAULT;
++	if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE)
++		return -EINVAL;
++
++	/*
++	 * Copy the floating point registers. There can be unused
++	 * registers see asm/hwcap.h for details.
++	 */
++	err |= __copy_from_user(&h->fpregs, &frame->ufp.fpregs,
++				sizeof(h->fpregs));
++	/*
++	 * Copy the status and control register.
++	 */
++	__get_user_error(h->fpscr, &frame->ufp.fpscr, err);
++
++	/*
++	 * Sanitise and restore the exception registers.
++	 */
++	__get_user_error(fpexc, &frame->ufp.fpexc, err);
++	/* Ensure the VFP is enabled. */
++	fpexc |= FPEXC_EN;
++	/* Ensure FPINST2 is invalid and the exception flag is cleared. */
++	fpexc &= ~(FPEXC_EX | FPEXC_FP2V);
++	h->fpexc = fpexc;
++
++	__get_user_error(h->fpinst, &frame->ufp.fpinst, err);
++	__get_user_error(h->fpinst2, &frame->ufp.fpinst2, err);
++
++	return err ? -EFAULT : 0;
++}
++
++#endif
++
+ /*
+  * Do a signal return; undo the signal stack.  These are aligned to 64-bit.
+  */
+@@ -233,8 +316,8 @@ static int restore_sigframe(struct pt_regs *regs, struct sigframe __user *sf)
+ 		err |= restore_iwmmxt_context(&aux->iwmmxt);
+ #endif
+ #ifdef CONFIG_VFP
+-//	if (err == 0)
+-//		err |= vfp_restore_state(&sf->aux.vfp);
++	if (err == 0)
++		err |= restore_vfp_context(&aux->vfp);
+ #endif
+ 
+ 	return err;
+@@ -348,8 +431,8 @@ setup_sigframe(struct sigframe __user *sf, struct pt_regs *regs, sigset_t *set)
+ 		err |= preserve_iwmmxt_context(&aux->iwmmxt);
+ #endif
+ #ifdef CONFIG_VFP
+-//	if (err == 0)
+-//		err |= vfp_save_state(&sf->aux.vfp);
++	if (err == 0)
++		err |= preserve_vfp_context(&aux->vfp);
+ #endif
+ 	__put_user_error(0, &aux->end_magic, err);
+ 
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0033-Switch-SGX-clocks-to-200MHz-on-DM37xx-OMAP36xx.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0033-Switch-SGX-clocks-to-200MHz-on-DM37xx-OMAP36xx.patch
new file mode 100644
index 0000000..00e0b64
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0033-Switch-SGX-clocks-to-200MHz-on-DM37xx-OMAP36xx.patch
@@ -0,0 +1,27 @@
+From 19f0835c3c8fa52280ae74bbc23dce747708f4af Mon Sep 17 00:00:00 2001
+From: Prabindh Sundareson <prabu@ti.com>
+Date: Wed, 3 Mar 2010 15:45:35 +0100
+Subject: [PATCH 33/45] Switch SGX clocks to 200MHz on DM37xx/OMAP36xx
+
+---
+ arch/arm/mach-omap2/clock34xx_data.c |    4 ++--
+ 1 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/clock34xx_data.c b/arch/arm/mach-omap2/clock34xx_data.c
+index e3c752f..89e2f61 100644
+--- a/arch/arm/mach-omap2/clock34xx_data.c
++++ b/arch/arm/mach-omap2/clock34xx_data.c
+@@ -3325,8 +3325,8 @@ static struct omap_clk omap3xxx_clks[] = {
+ 	CLK(NULL,	"gfx_l3_ick",	&gfx_l3_ick,	CK_3430ES1),
+ 	CLK(NULL,	"gfx_cg1_ck",	&gfx_cg1_ck,	CK_3430ES1),
+ 	CLK(NULL,	"gfx_cg2_ck",	&gfx_cg2_ck,	CK_3430ES1),
+-	CLK(NULL,	"sgx_fck",	&sgx_fck,	CK_3430ES2 | CK_3517),
+-	CLK(NULL,	"sgx_ick",	&sgx_ick,	CK_3430ES2 | CK_3517),
++	CLK(NULL,	"sgx_fck",	&sgx_fck,	CK_3430ES2 | CK_3517 | CK_36XX),
++	CLK(NULL,	"sgx_ick",	&sgx_ick,	CK_3430ES2 | CK_3517 | CK_36XX),
+ 	CLK(NULL,	"d2d_26m_fck",	&d2d_26m_fck,	CK_3430ES1),
+ 	CLK(NULL,	"modem_fck",	&modem_fck,	CK_343X),
+ 	CLK(NULL,	"sad2d_ick",	&sad2d_ick,	CK_343X),
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0034-modedb.c-add-proper-720p60-mode.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0034-modedb.c-add-proper-720p60-mode.patch
new file mode 100644
index 0000000..d2298e0
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0034-modedb.c-add-proper-720p60-mode.patch
@@ -0,0 +1,27 @@
+From 2f4193b92096394cfd56e3757c8d6ca8e13d5c4d Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@dominion.thruhere.net>
+Date: Mon, 8 Mar 2010 14:38:31 +0100
+Subject: [PATCH 34/45] modedb.c: add proper 720p60 mode
+
+---
+ drivers/video/modedb.c |    4 ++++
+ 1 files changed, 4 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/video/modedb.c b/drivers/video/modedb.c
+index b32fa2a..f017d57 100644
+--- a/drivers/video/modedb.c
++++ b/drivers/video/modedb.c
+@@ -44,6 +44,10 @@ static const struct fb_videomode modedb[] = {
+ 	NULL, 60, 640, 480, 39721, 40, 24, 32, 11, 96, 2,
+ 	0, FB_VMODE_NONINTERLACED
+     }, {
++	/* 1280x720 @ 60 Hz, 45 kHz hsync, CEA 681-E Format 4 */
++	"hd720", 60, 1280, 720, 13468, 220, 110, 20, 5, 40, 5,
++	0, FB_VMODE_NONINTERLACED
++    }, {
+ 	/* 800x600 @ 56 Hz, 35.15 kHz hsync */
+ 	NULL, 56, 800, 600, 27777, 128, 24, 22, 1, 72, 2,
+ 	0, FB_VMODE_NONINTERLACED
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0035-RTC-add-support-for-backup-battery-recharge.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0035-RTC-add-support-for-backup-battery-recharge.patch
new file mode 100644
index 0000000..0f76d7a
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0035-RTC-add-support-for-backup-battery-recharge.patch
@@ -0,0 +1,55 @@
+From 237492efd365a0f69d41d818fc368f5621aa8f3b Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Thu, 4 Feb 2010 12:26:22 -0800
+Subject: [PATCH 35/45] RTC: add support for backup battery recharge
+
+---
+ drivers/rtc/rtc-twl.c |   25 +++++++++++++++++++++++++
+ 1 files changed, 25 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/rtc/rtc-twl.c b/drivers/rtc/rtc-twl.c
+index c6a83a2..2329b5b 100644
+--- a/drivers/rtc/rtc-twl.c
++++ b/drivers/rtc/rtc-twl.c
+@@ -30,6 +30,23 @@
+ 
+ #include <linux/i2c/twl.h>
+ 
++/*
++ * PM_RECEIVER block register offsets (use TWL4030_MODULE_PM_RECEIVER)
++ */
++#define REG_BB_CFG	0x12
++
++/* PM_RECEIVER  BB_CFG bitfields */
++#define BIT_PM_RECEIVER_BB_CFG_BBCHEN           0x10
++#define BIT_PM_RECEIVER_BB_CFG_BBSEL            0x0C
++#define BIT_PM_RECEIVER_BB_CFG_BBSEL_2V5        0x00
++#define BIT_PM_RECEIVER_BB_CFG_BBSEL_3V0        0x04
++#define BIT_PM_RECEIVER_BB_CFG_BBSEL_3V1        0x08
++#define BIT_PM_RECEIVER_BB_CFG_BBSEL_3v2        0x0c
++#define BIT_PM_RECEIVER_BB_CFG_BBISEL           0x03
++#define BIT_PM_RECEIVER_BB_CFG_BBISEL_25UA      0x00
++#define BIT_PM_RECEIVER_BB_CFG_BBISEL_150UA     0x01
++#define BIT_PM_RECEIVER_BB_CFG_BBISEL_500UA     0x02
++#define BIT_PM_RECEIVER_BB_CFG_BBISEL_1MA       0x03
+ 
+ /*
+  * RTC block register offsets (use TWL_MODULE_RTC)
+@@ -508,6 +525,14 @@ static int __devinit twl_rtc_probe(struct platform_device *pdev)
+ 	if (ret < 0)
+ 		goto out2;
+ 
++	/* enable backup battery charging */
++	/* use a conservative 25uA @ 3.1V */
++	ret = twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
++		BIT_PM_RECEIVER_BB_CFG_BBCHEN |
++		BIT_PM_RECEIVER_BB_CFG_BBSEL_3V1 |
++		BIT_PM_RECEIVER_BB_CFG_BBISEL_25UA,
++		REG_BB_CFG);
++
+ 	return ret;
+ 
+ out2:
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0036-ARM-Add-prompt-for-CONFIG_ALIGNMENT_TRAP.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0036-ARM-Add-prompt-for-CONFIG_ALIGNMENT_TRAP.patch
new file mode 100644
index 0000000..9e32d62
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0036-ARM-Add-prompt-for-CONFIG_ALIGNMENT_TRAP.patch
@@ -0,0 +1,29 @@
+From aa2753fcce815b4a86be5c95238cf029a948e5ff Mon Sep 17 00:00:00 2001
+From: Mans Rullgard <mans@mansr.com>
+Date: Mon, 13 Oct 2008 20:32:16 +0100
+Subject: [PATCH 36/45] ARM: Add prompt for CONFIG_ALIGNMENT_TRAP
+
+This adds a prompt text for CONFIG_ALIGNMENT_TRAP, thus making it
+visible in make *config.
+
+Signed-off-by: Mans Rullgard <mans@mansr.com>
+---
+ arch/arm/Kconfig |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
+index 88f628b..f5ded3c 100644
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
+@@ -1224,7 +1224,7 @@ config LEDS_CPU
+ 	  will overrule the CPU usage LED.
+ 
+ config ALIGNMENT_TRAP
+-	bool
++	bool "Enable alignment trap"
+ 	depends on CPU_CP15_MMU
+ 	default y if !ARCH_EBSA110
+ 	help
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0037-ARM-Print-warning-on-alignment-trap-in-kernel-mode.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0037-ARM-Print-warning-on-alignment-trap-in-kernel-mode.patch
new file mode 100644
index 0000000..5fb8b0d
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0037-ARM-Print-warning-on-alignment-trap-in-kernel-mode.patch
@@ -0,0 +1,31 @@
+From a265396d38d93b371dbba020fb64aee42b4d4905 Mon Sep 17 00:00:00 2001
+From: Mans Rullgard <mans@mansr.com>
+Date: Sat, 28 Mar 2009 13:21:55 +0000
+Subject: [PATCH 37/45] ARM: Print warning on alignment trap in kernel mode
+
+Signed-off-by: Mans Rullgard <mans@mansr.com>
+---
+ arch/arm/mm/alignment.c |    7 +++++++
+ 1 files changed, 7 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
+index b270d62..5e9014b 100644
+--- a/arch/arm/mm/alignment.c
++++ b/arch/arm/mm/alignment.c
+@@ -756,6 +756,13 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+ 
+ 	ai_sys += 1;
+ 
++	printk("Alignment trap in kernel: %s (%d) PC=0x%08lx Instr=0x%0*lx "
++	       "Address=0x%08lx FSR 0x%03x\n", current->comm,
++	       task_pid_nr(current), instrptr,
++	       thumb_mode(regs) ? 4 : 8,
++	       thumb_mode(regs) ? tinstr : instr,
++	       addr, fsr);
++
+  fixup:
+ 
+ 	regs->ARM_pc += isize;
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0038-ARM-Expose-some-CPU-control-registers-via-sysfs.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0038-ARM-Expose-some-CPU-control-registers-via-sysfs.patch
new file mode 100644
index 0000000..0dc8ff6
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0038-ARM-Expose-some-CPU-control-registers-via-sysfs.patch
@@ -0,0 +1,202 @@
+From b2792916bb10bdd3093bf88ca62064a3b10ad877 Mon Sep 17 00:00:00 2001
+From: Mans Rullgard <mans@mansr.com>
+Date: Tue, 10 Nov 2009 00:39:21 +0000
+Subject: [PATCH 38/45] ARM: Expose some CPU control registers via sysfs
+
+This creates sysfs files under /sys/devices/system/cpu/cpuN
+exposing the values of the control register, auxiliary control
+register, and L2 cache auxiliary control register.  Writing to
+the files allows setting the value of bits which are safe to
+change at any time.
+
+Signed-off-by: Mans Rullgard <mans@mansr.com>
+---
+ arch/arm/Kconfig           |    5 ++
+ arch/arm/kernel/Makefile   |    1 +
+ arch/arm/kernel/sysfs_v7.c |  146 ++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 152 insertions(+), 0 deletions(-)
+ create mode 100644 arch/arm/kernel/sysfs_v7.c
+
+diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
+index f5ded3c..2d370da 100644
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
+@@ -1252,6 +1252,11 @@ config UACCESS_WITH_MEMCPY
+ 	  However, if the CPU data cache is using a write-allocate mode,
+ 	  this option is unlikely to provide any performance gain.
+ 
++config CPU_V7_SYSFS
++	bool
++	depends on CPU_V7 && SYSFS
++	default y
++
+ endmenu
+ 
+ menu "Boot options"
+diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
+index dd00f74..ee20134 100644
+--- a/arch/arm/kernel/Makefile
++++ b/arch/arm/kernel/Makefile
+@@ -38,6 +38,7 @@ obj-$(CONFIG_ARM_THUMBEE)	+= thumbee.o
+ obj-$(CONFIG_KGDB)		+= kgdb.o
+ obj-$(CONFIG_ARM_UNWIND)	+= unwind.o
+ obj-$(CONFIG_HAVE_TCM)		+= tcm.o
++obj-$(CONFIG_CPU_V7_SYSFS)	+= sysfs_v7.o
+ 
+ obj-$(CONFIG_CRUNCH)		+= crunch.o crunch-bits.o
+ AFLAGS_crunch-bits.o		:= -Wa,-mcpu=ep9312
+diff --git a/arch/arm/kernel/sysfs_v7.c b/arch/arm/kernel/sysfs_v7.c
+new file mode 100644
+index 0000000..c05bf5f
+--- /dev/null
++++ b/arch/arm/kernel/sysfs_v7.c
+@@ -0,0 +1,146 @@
++/*
++ *  linux/arch/arm/kernel/sysfs.c
++ *
++ *  Copyright (C) 2008 Mans Rullgard
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/cpu.h>
++#include <linux/sysdev.h>
++#include <linux/fs.h>
++
++#define SETBITS(val, bits, new)			\
++	do {					\
++		val &= ~bits;			\
++		val |= new & bits;		\
++	} while (0)
++
++#define SHOW_REG(name, opc1, crn, crm, opc2)				\
++static ssize_t name##_show(struct sys_device *dev,			\
++			   struct sysdev_attribute *attr,		\
++			   char *buf)					\
++{									\
++	unsigned val;							\
++	asm ("mrc p15,"#opc1", %0,"#crn","#crm","#opc2 : "=r"(val));	\
++	return snprintf(buf, PAGE_SIZE, "%08x\n", val);			\
++}
++
++#define STORE_REG(name, opc1, crn, crm, opc2, bits)			\
++static ssize_t name##_store(struct sys_device *dev,			\
++			    struct sysdev_attribute *attr,		\
++			    const char *buf, size_t size)		\
++{									\
++	char *end;							\
++	unsigned new = simple_strtoul(buf, &end, 0);			\
++	unsigned val;							\
++									\
++	if (end == buf)							\
++		return -EINVAL;						\
++									\
++	asm ("mrc p15,"#opc1", %0,"#crn","#crm","#opc2 : "=r"(val));	\
++	SETBITS(val, bits, new);					\
++	asm ("mcr p15,"#opc1", %0,"#crn","#crm","#opc2 :: "r"(val));	\
++									\
++	return end - buf;						\
++}
++
++#define RD_REG(name, opc1, crn, crm, opc2)				\
++	SHOW_REG(name, opc1, crn, crm, opc2)				\
++	static SYSDEV_ATTR(name, S_IRUGO|S_IWUSR, name##_show, NULL)
++
++#define RDWR_REG(name, opc1, crn, crm, opc2, bits)			\
++	SHOW_REG(name, opc1, crn, crm, opc2)				\
++	STORE_REG(name, opc1, crn, crm, opc2, bits)			\
++	static SYSDEV_ATTR(name, S_IRUGO|S_IWUSR, name##_show, name##_store)
++
++RDWR_REG(control, 0, c1, c0, 0, 0x802);
++
++SHOW_REG(aux_ctl, 0, c1, c0, 1)
++
++#ifdef CONFIG_ARCH_OMAP34XX
++static ssize_t aux_ctl_store(struct sys_device *dev,
++			     struct sysdev_attribute *attr,
++			     const char *buf, size_t size)
++{
++	char *end;
++	unsigned new = simple_strtoul(buf, &end, 0);
++	unsigned val;
++
++	if (end == buf)
++		return -EINVAL;
++
++	asm ("mrc p15, 0, %0, c1, c0, 1" : "=r"(val));
++	SETBITS(val, 0xff8, new);
++	val &= ~2;
++	asm ("mov r0,  %0	\n\t"
++	     "mov r12, #3	\n\t"
++	     "smc #0		\n\t"
++	     :: "r"(val) : "r0", "r12");
++
++	return end - buf;
++}
++#define AUX_WR S_IWUSR
++#else
++#define aux_ctl_store NULL
++#define AUX_WR 0
++#endif
++
++static SYSDEV_ATTR(aux_control, S_IRUGO|AUX_WR, aux_ctl_show, aux_ctl_store);
++
++SHOW_REG(l2_aux_ctl, 1, c9, c0, 2)
++
++#ifdef CONFIG_ARCH_OMAP34XX
++static ssize_t l2_aux_ctl_store(struct sys_device *dev,
++				struct sysdev_attribute *attr,
++				const char *buf, size_t size)
++{
++	char *end;
++	unsigned new = simple_strtoul(buf, &end, 0);
++	unsigned val;
++
++	if (end == buf)
++		return -EINVAL;
++
++	asm ("mrc p15, 1, %0, c9, c0, 2" : "=r"(val));
++	SETBITS(val, 0xbc00000, new);
++	asm ("mov r0,  %0	\n\t"
++	     "mov r12, #2	\n\t"
++	     "smc #0		\n\t"
++	     :: "r"(val) : "r0", "r12");
++
++	return end - buf;
++}
++#define L2AUX_WR S_IWUSR
++#else
++#define l2_aux_ctl_store NULL
++#define L2AUX_WR 0
++#endif
++
++static SYSDEV_ATTR(l2_aux_control, S_IRUGO|L2AUX_WR,
++		   l2_aux_ctl_show, l2_aux_ctl_store);
++
++#define REG_ATTR(sysdev, name)						\
++	do {								\
++		int err = sysfs_create_file(&sysdev->kobj, &name.attr); \
++		WARN_ON(err != 0);					\
++	} while (0)
++
++static int __init cpu_sysfs_init(void)
++{
++	struct sys_device *sysdev;
++	int cpu;
++
++	for_each_possible_cpu(cpu) {
++		sysdev = get_cpu_sysdev(cpu);
++		REG_ATTR(sysdev, attr_control);
++		REG_ATTR(sysdev, attr_aux_control);
++		REG_ATTR(sysdev, attr_l2_aux_control);
++	}
++
++	return 0;
++}
++device_initcall(cpu_sysfs_init);
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0039-ARM-Add-option-to-allow-userspace-PLE-access.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0039-ARM-Add-option-to-allow-userspace-PLE-access.patch
new file mode 100644
index 0000000..fb6e86f
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0039-ARM-Add-option-to-allow-userspace-PLE-access.patch
@@ -0,0 +1,48 @@
+From f9ab0732a5302bd52026f92430c91b253aa4111b Mon Sep 17 00:00:00 2001
+From: Mans Rullgard <mans@mansr.com>
+Date: Tue, 10 Nov 2009 00:41:54 +0000
+Subject: [PATCH 39/45] ARM: Add option to allow userspace PLE access
+
+This adds a Kconfig option to allow userspace to access the L2 preload
+engine (PLE) found in Cortex-A8.
+
+Signed-off-by: Mans Rullgard <mans@mansr.com>
+---
+ arch/arm/kernel/head.S |    4 ++++
+ arch/arm/mm/Kconfig    |    8 ++++++++
+ 2 files changed, 12 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
+index eb62bf9..659ec9e 100644
+--- a/arch/arm/kernel/head.S
++++ b/arch/arm/kernel/head.S
+@@ -172,6 +172,10 @@ __enable_mmu:
+ #ifdef CONFIG_CPU_ICACHE_DISABLE
+ 	bic	r0, r0, #CR_I
+ #endif
++#ifdef CONFIG_USER_L2_PLE
++	mov	r5, #3
++	mcr	p15, 0, r5, c11, c1, 0
++#endif
+ 	mov	r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \
+ 		      domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \
+ 		      domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \
+diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
+index dd4698c..564ff7d 100644
+--- a/arch/arm/mm/Kconfig
++++ b/arch/arm/mm/Kconfig
+@@ -785,3 +785,11 @@ config ARM_L1_CACHE_SHIFT
+ 	int
+ 	default 6 if ARCH_OMAP3 || ARCH_S5PC1XX
+ 	default 5
++
++config USER_L2_PLE
++	bool "Enable userspace access to the L2 PLE"
++	depends on CPU_V7
++	default n
++	help
++	  Enable userspace access to the L2 preload engine (PLE) available
++	  in Cortex-A series ARM processors.
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0040-ARM-Add-option-to-allow-userspace-access-to-performa.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0040-ARM-Add-option-to-allow-userspace-access-to-performa.patch
new file mode 100644
index 0000000..bcd9c9d
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0040-ARM-Add-option-to-allow-userspace-access-to-performa.patch
@@ -0,0 +1,49 @@
+From 6efdc547be5f685b4f29b05eba73cb56441fd898 Mon Sep 17 00:00:00 2001
+From: Mans Rullgard <mans@mansr.com>
+Date: Tue, 10 Nov 2009 00:52:56 +0000
+Subject: [PATCH 40/45] ARM: Add option to allow userspace access to performance counters
+
+This adds an option to allow userspace access to the performance monitor
+registers of the Cortex-A8.
+
+Signed-off-by: Mans Rullgard <mans@mansr.com>
+---
+ arch/arm/mm/Kconfig   |    7 +++++++
+ arch/arm/mm/proc-v7.S |    6 ++++++
+ 2 files changed, 13 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
+index 564ff7d..fda2e68 100644
+--- a/arch/arm/mm/Kconfig
++++ b/arch/arm/mm/Kconfig
+@@ -793,3 +793,10 @@ config USER_L2_PLE
+ 	help
+ 	  Enable userspace access to the L2 preload engine (PLE) available
+ 	  in Cortex-A series ARM processors.
++
++config USER_PMON
++	bool "Enable userspace access to performance counters"
++	depends on CPU_V7
++	default n
++	help
++	  Enable userpsace access to the performance monitor registers.
+diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
+index 3a28521..fec926a 100644
+--- a/arch/arm/mm/proc-v7.S
++++ b/arch/arm/mm/proc-v7.S
+@@ -270,6 +270,12 @@ __v7_setup:
+ 	mcr	p15, 0, r5, c10, c2, 0		@ write PRRR
+ 	mcr	p15, 0, r6, c10, c2, 1		@ write NMRR
+ #endif
++
++#ifdef CONFIG_USER_PMON
++	mov	r0, #1
++	mcr	p15, 0, r0, c9, c14, 0
++#endif
++
+ 	adr	r5, v7_crval
+ 	ldmia	r5, {r5, r6}
+ #ifdef CONFIG_CPU_ENDIAN_BE8
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0041-ARM-Expose-some-PMON-registers-through-sysfs.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0041-ARM-Expose-some-PMON-registers-through-sysfs.patch
new file mode 100644
index 0000000..3ceac2f
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0041-ARM-Expose-some-PMON-registers-through-sysfs.patch
@@ -0,0 +1,41 @@
+From 51643be36a5b45636cd7208a81a09638d7913604 Mon Sep 17 00:00:00 2001
+From: Mans Rullgard <mans@mansr.com>
+Date: Sat, 28 Mar 2009 13:05:02 +0000
+Subject: [PATCH 41/45] ARM: Expose some PMON registers through sysfs
+
+---
+ arch/arm/kernel/sysfs_v7.c |   11 +++++++++++
+ 1 files changed, 11 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/kernel/sysfs_v7.c b/arch/arm/kernel/sysfs_v7.c
+index c05bf5f..5ed32fb 100644
+--- a/arch/arm/kernel/sysfs_v7.c
++++ b/arch/arm/kernel/sysfs_v7.c
+@@ -123,6 +123,12 @@ static ssize_t l2_aux_ctl_store(struct sys_device *dev,
+ static SYSDEV_ATTR(l2_aux_control, S_IRUGO|L2AUX_WR,
+ 		   l2_aux_ctl_show, l2_aux_ctl_store);
+ 
++RDWR_REG(pmon_pmnc,   0, c9, c12, 0, 0x3f)
++RDWR_REG(pmon_cntens, 0, c9, c12, 1, 0x8000000f)
++RDWR_REG(pmon_cntenc, 0, c9, c12, 2, 0x8000000f)
++RDWR_REG(pmon_ccnt,   0, c9, c13, 0, 0xffffffff)
++RDWR_REG(pmon_useren, 0, c9, c14, 0, 1)
++
+ #define REG_ATTR(sysdev, name)						\
+ 	do {								\
+ 		int err = sysfs_create_file(&sysdev->kobj, &name.attr); \
+@@ -139,6 +145,11 @@ static int __init cpu_sysfs_init(void)
+ 		REG_ATTR(sysdev, attr_control);
+ 		REG_ATTR(sysdev, attr_aux_control);
+ 		REG_ATTR(sysdev, attr_l2_aux_control);
++		REG_ATTR(sysdev, attr_pmon_pmnc);
++		REG_ATTR(sysdev, attr_pmon_cntens);
++		REG_ATTR(sysdev, attr_pmon_cntenc);
++		REG_ATTR(sysdev, attr_pmon_ccnt);
++		REG_ATTR(sysdev, attr_pmon_useren);
+ 	}
+ 
+ 	return 0;
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0042-musb-allow-host-io-without-gadget-module.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0042-musb-allow-host-io-without-gadget-module.patch
new file mode 100644
index 0000000..7a066d4
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0042-musb-allow-host-io-without-gadget-module.patch
@@ -0,0 +1,90 @@
+From 38d07e3ffe848680df123f7422ec4b150bbc8f68 Mon Sep 17 00:00:00 2001
+From: Ajay Kumar Gupta <ajay.gupta@ti.com>
+Date: Wed, 14 Apr 2010 16:08:37 +0530
+Subject: [PATCH 42/45] musb: allow host io without gadget module
+
+Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
+---
+ drivers/usb/musb/musb_core.c   |   14 +++++++++-----
+ drivers/usb/musb/musb_gadget.c |   26 --------------------------
+ 2 files changed, 9 insertions(+), 31 deletions(-)
+
+diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
+index 98874c5..a448fa6 100644
+--- a/drivers/usb/musb/musb_core.c
++++ b/drivers/usb/musb/musb_core.c
+@@ -2101,10 +2101,12 @@ bad_config:
+ 	 * (We expect the ID pin to be forcibly grounded!!)
+ 	 * Otherwise, wait till the gadget driver hooks up.
+ 	 */
+-	if (!is_otg_enabled(musb) && is_host_enabled(musb)) {
+-		MUSB_HST_MODE(musb);
+-		musb->xceiv->default_a = 1;
+-		musb->xceiv->state = OTG_STATE_A_IDLE;
++	if (is_host_enabled(musb)) {
++		if (!is_otg_enabled(musb)) {
++			MUSB_HST_MODE(musb);
++			musb->xceiv->default_a = 1;
++			musb->xceiv->state = OTG_STATE_A_IDLE;
++		}
+ 
+ 		status = usb_add_hcd(musb_to_hcd(musb), -1, 0);
+ 
+@@ -2115,7 +2117,9 @@ bad_config:
+ 					& MUSB_DEVCTL_BDEVICE
+ 				? 'B' : 'A'));
+ 
+-	} else /* peripheral is enabled */ {
++	}
++	/* peripheral is enabled */
++	if (is_peripheral_enabled(musb)) {
+ 		MUSB_DEV_MODE(musb);
+ 		musb->xceiv->default_a = 0;
+ 		musb->xceiv->state = OTG_STATE_B_IDLE;
+diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
+index fd842af..b9ef9f3 100644
+--- a/drivers/usb/musb/musb_gadget.c
++++ b/drivers/usb/musb/musb_gadget.c
+@@ -1768,24 +1768,6 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
+ 		otg_set_peripheral(musb->xceiv, &musb->g);
+ 
+ 		spin_unlock_irqrestore(&musb->lock, flags);
+-
+-		if (is_otg_enabled(musb)) {
+-			DBG(3, "OTG startup...\n");
+-
+-			/* REVISIT:  funcall to other code, which also
+-			 * handles power budgeting ... this way also
+-			 * ensures HdrcStart is indirectly called.
+-			 */
+-			retval = usb_add_hcd(musb_to_hcd(musb), -1, 0);
+-			if (retval < 0) {
+-				DBG(1, "add_hcd failed, %d\n", retval);
+-				spin_lock_irqsave(&musb->lock, flags);
+-				otg_set_peripheral(musb->xceiv, NULL);
+-				musb->gadget_driver = NULL;
+-				musb->g.dev.driver = NULL;
+-				spin_unlock_irqrestore(&musb->lock, flags);
+-			}
+-		}
+ 	}
+ 
+ 	return retval;
+@@ -1881,14 +1863,6 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+ 		retval = -EINVAL;
+ 	spin_unlock_irqrestore(&musb->lock, flags);
+ 
+-	if (is_otg_enabled(musb) && retval == 0) {
+-		usb_remove_hcd(musb_to_hcd(musb));
+-		/* FIXME we need to be able to register another
+-		 * gadget driver here and have everything work;
+-		 * that currently misbehaves.
+-		 */
+-	}
+-
+ 	return retval;
+ }
+ EXPORT_SYMBOL(usb_gadget_unregister_driver);
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0043-MTD-silence-ecc-errors-on-mtdblock0.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0043-MTD-silence-ecc-errors-on-mtdblock0.patch
new file mode 100644
index 0000000..6f210be
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0043-MTD-silence-ecc-errors-on-mtdblock0.patch
@@ -0,0 +1,59 @@
+From 089d3a51f0467d68c42b2df88a6f9a0488aada47 Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Mon, 26 Apr 2010 11:17:26 -0700
+Subject: [PATCH 43/45] MTD: silence ecc errors on mtdblock0
+
+mtdblock0 is the x-load partition, which uses hw ecc
+this confuses linux, which uses sw ecc
+this patch silences ecc error messages when linux peeks into mtdblock0
+* not for upstream submission *
+---
+ block/blk-core.c            |    3 ++-
+ drivers/mtd/nand/nand_ecc.c |    2 +-
+ fs/buffer.c                 |    3 ++-
+ 3 files changed, 5 insertions(+), 3 deletions(-)
+
+diff --git a/block/blk-core.c b/block/blk-core.c
+index 718897e..c526fde 100644
+--- a/block/blk-core.c
++++ b/block/blk-core.c
+@@ -1970,7 +1970,8 @@ bool blk_update_request(struct request *req, int error, unsigned int nr_bytes)
+ 		req->errors = 0;
+ 
+ 	if (error && (blk_fs_request(req) && !(req->cmd_flags & REQ_QUIET))) {
+-		printk(KERN_ERR "end_request: I/O error, dev %s, sector %llu\n",
++		if (req->rq_disk && (strcmp(req->rq_disk->disk_name, "mtdblock0") != 0))
++			printk(KERN_ERR "end_request: I/O error, dev %s, sector %llu\n",
+ 				req->rq_disk ? req->rq_disk->disk_name : "?",
+ 				(unsigned long long)blk_rq_pos(req));
+ 	}
+diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c
+index 92320a6..2b86b6d 100644
+--- a/drivers/mtd/nand/nand_ecc.c
++++ b/drivers/mtd/nand/nand_ecc.c
+@@ -492,7 +492,7 @@ int __nand_correct_data(unsigned char *buf,
+ 	if ((bitsperbyte[b0] + bitsperbyte[b1] + bitsperbyte[b2]) == 1)
+ 		return 1;	/* error in ecc data; no action needed */
+ 
+-	printk(KERN_ERR "uncorrectable error : ");
++//	printk(KERN_ERR "uncorrectable error : ");
+ 	return -1;
+ }
+ EXPORT_SYMBOL(__nand_correct_data);
+diff --git a/fs/buffer.c b/fs/buffer.c
+index 6fa5302..27b3103 100644
+--- a/fs/buffer.c
++++ b/fs/buffer.c
+@@ -114,7 +114,8 @@ static int quiet_error(struct buffer_head *bh)
+ static void buffer_io_error(struct buffer_head *bh)
+ {
+ 	char b[BDEVNAME_SIZE];
+-	printk(KERN_ERR "Buffer I/O error on device %s, logical block %Lu\n",
++	if (strcmp(bdevname(bh->b_bdev, b), "mtdblock0") != 0)
++		printk(KERN_ERR "Buffer I/O error on device %s, logical block %Lu\n",
+ 			bdevname(bh->b_bdev, b),
+ 			(unsigned long long)bh->b_blocknr);
+ }
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0044-ARM-OMAP-beagle-every-known-beagle-except-revB-uses-.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0044-ARM-OMAP-beagle-every-known-beagle-except-revB-uses-.patch
new file mode 100644
index 0000000..a558fe3
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0044-ARM-OMAP-beagle-every-known-beagle-except-revB-uses-.patch
@@ -0,0 +1,34 @@
+From 2db9c35d01af6f4b3e44fac3466b5d6b62e52232 Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@dominion.thruhere.net>
+Date: Thu, 13 May 2010 21:43:08 +0200
+Subject: [PATCH 44/45] ARM: OMAP: beagle: every known beagle (except revB) uses 2 chipselects so don't use NULL for the second chipselect timings
+
+---
+ arch/arm/mach-omap2/board-omap3beagle.c |    4 ++--
+ 1 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index c4ebaab..4aa91cb 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -614,7 +614,7 @@ static void __init omap3_beagle_init_irq(void)
+         if (cpu_is_omap3630())
+         {
+                 omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+-                                        NULL,
++                                        mt46h32m32lf6_sdrc_params,
+                                         _omap37x_mpu_rate_table,
+                                         _omap37x_dsp_rate_table,
+                                         _omap37x_l3_rate_table);
+@@ -622,7 +622,7 @@ static void __init omap3_beagle_init_irq(void)
+         else
+         {
+                 omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+-                                        NULL,
++                                        mt46h32m32lf6_sdrc_params,
+                                         _omap35x_mpu_rate_table,
+                                         _omap35x_dsp_rate_table,
+                                         _omap35x_l3_rate_table);
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0045-ARM-OMAP-beagle-add-support-for-beagleFPGA-expansion.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0045-ARM-OMAP-beagle-add-support-for-beagleFPGA-expansion.patch
new file mode 100644
index 0000000..0278c4e
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0045-ARM-OMAP-beagle-add-support-for-beagleFPGA-expansion.patch
@@ -0,0 +1,70 @@
+From 46df6bfeaff6f64bfae3fd9ac930bd6c768a352f Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@dominion.thruhere.net>
+Date: Sat, 15 May 2010 21:47:32 +0200
+Subject: [PATCH 45/45] ARM: OMAP: beagle: add support for beagleFPGA expansionboard: http://members.cox.net/ebrombaugh1/embedded/beagle/beagle_fpga.html
+
+---
+ arch/arm/mach-omap2/board-omap3beagle.c |   26 ++++++++++++++++++++++++++
+ 1 files changed, 26 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index 4aa91cb..93b9e5f 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -24,6 +24,7 @@
+ #include <linux/irq.h>
+ #include <linux/input.h>
+ #include <linux/gpio_keys.h>
++#include <linux/spi/spi.h>
+ 
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
+@@ -47,6 +48,7 @@
+ #include <plat/timer-gp.h>
+ #include <plat/clock.h>
+ #include <plat/omap-pm.h>
++#include <plat/mcspi.h>
+ 
+ #include "mux.h"
+ #include "mmc-twl4030.h"
+@@ -609,6 +611,24 @@ static struct platform_device keys_gpio = {
+ 	},
+ };
+ 
++static struct spi_board_info beaglefpga_mcspi_board_info[] = {
++	// spi 4.0
++	{
++		.modalias	= "spidev",
++		.max_speed_hz	= 48000000, //48 Mbps
++		.bus_num	= 4,
++		.chip_select	= 0,	
++		.mode = SPI_MODE_1,
++	},
++};
++
++static void __init beaglefpga_init_spi(void)
++{
++	/* hook the spi ports to the spidev driver */
++	spi_register_board_info(beaglefpga_mcspi_board_info,
++		ARRAY_SIZE(beaglefpga_mcspi_board_info));
++}
++
+ static void __init omap3_beagle_init_irq(void)
+ {
+         if (cpu_is_omap3630())
+@@ -774,6 +794,12 @@ static void __init omap3_beagle_init(void)
+ 		gpio_export(162, 1);
+ 	}
+ 
++	if(!strcmp(expansionboard_name, "beaglefpga"))
++	{  
++		printk(KERN_INFO "Beagle expansionboard: Using McSPI for SPI\n");
++		beaglefpga_init_spi();
++	}
++
+ 	usb_musb_init();
+ 	usb_ehci_init(&ehci_pdata);
+ 	omap3beagle_flash_init();
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0046-attemp-to-fix-serial-console-corruption-during-cpuid.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0046-attemp-to-fix-serial-console-corruption-during-cpuid.patch
new file mode 100644
index 0000000..11f5226
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0046-attemp-to-fix-serial-console-corruption-during-cpuid.patch
@@ -0,0 +1,57 @@
+From b0c673e40d40428a9bd05101d15d773cd4f4720c Mon Sep 17 00:00:00 2001
+From: Ranjith Lohithakshan <unknown@ti.com>
+Date: Sat, 22 May 2010 18:32:24 +0200
+Subject: [PATCH 46/48] attemp to fix serial console corruption during cpuidle
+
+---
+ arch/arm/mach-omap2/cpuidle34xx.c |    6 +++++-
+ 1 files changed, 5 insertions(+), 1 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
+index f8aea56..35d1c3e 100644
+--- a/arch/arm/mach-omap2/cpuidle34xx.c
++++ b/arch/arm/mach-omap2/cpuidle34xx.c
+@@ -60,7 +60,7 @@ struct omap3_processor_cx {
+ 
+ struct omap3_processor_cx omap3_power_states[OMAP3_MAX_STATES];
+ struct omap3_processor_cx current_cx_state;
+-struct powerdomain *mpu_pd, *core_pd;
++struct powerdomain *mpu_pd, *per_pd, *core_pd;
+ 
+ /*
+  * The latencies/thresholds for various C states have
+@@ -131,6 +131,7 @@ static int omap3_enter_idle(struct cpuidle_device *dev,
+ 	local_fiq_disable();
+ 
+ 	pwrdm_set_next_pwrst(mpu_pd, mpu_state);
++	pwrdm_set_next_pwrst(per_pd, mpu_state);
+ 	pwrdm_set_next_pwrst(core_pd, core_state);
+ 
+ 	if (omap_irq_pending() || need_resched())
+@@ -138,6 +139,7 @@ static int omap3_enter_idle(struct cpuidle_device *dev,
+ 
+ 	if (cx->type == OMAP3_STATE_C1) {
+ 		pwrdm_for_each_clkdm(mpu_pd, _cpuidle_deny_idle);
++		pwrdm_for_each_clkdm(per_pd, _cpuidle_deny_idle);
+ 		pwrdm_for_each_clkdm(core_pd, _cpuidle_deny_idle);
+ 	}
+ 
+@@ -146,6 +148,7 @@ static int omap3_enter_idle(struct cpuidle_device *dev,
+ 
+ 	if (cx->type == OMAP3_STATE_C1) {
+ 		pwrdm_for_each_clkdm(mpu_pd, _cpuidle_allow_idle);
++		pwrdm_for_each_clkdm(per_pd, _cpuidle_allow_idle);
+ 		pwrdm_for_each_clkdm(core_pd, _cpuidle_allow_idle);
+ 	}
+ 
+@@ -425,6 +428,7 @@ int __init omap3_idle_init(void)
+ 	struct cpuidle_device *dev;
+ 
+ 	mpu_pd = pwrdm_lookup("mpu_pwrdm");
++	per_pd = pwrdm_lookup("per_pwrdm");
+ 	core_pd = pwrdm_lookup("core_pwrdm");
+ 
+ 	omap_init_power_states();
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0047-clock34xx-only-try-to-idle-IVA-subsys-when-CONFIG_PM.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0047-clock34xx-only-try-to-idle-IVA-subsys-when-CONFIG_PM.patch
new file mode 100644
index 0000000..0db8bf7
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0047-clock34xx-only-try-to-idle-IVA-subsys-when-CONFIG_PM.patch
@@ -0,0 +1,37 @@
+From 4d5f88fca430ca38a35e60683dc301e80046b05d Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@dominion.thruhere.net>
+Date: Sun, 23 May 2010 14:47:32 +0200
+Subject: [PATCH 47/48] clock34xx: only try to idle IVA subsys when CONFIG_PM is set
+
+---
+ arch/arm/mach-omap2/clock34xx.c |    5 ++++-
+ 1 files changed, 4 insertions(+), 1 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
+index 2bb7182..a323f9f 100644
+--- a/arch/arm/mach-omap2/clock34xx.c
++++ b/arch/arm/mach-omap2/clock34xx.c
+@@ -407,7 +407,9 @@ void omap3_clk_lock_dpll5(void)
+ 	return;
+ }
+ 
++#ifdef CONFIG_PM
+ extern void __init omap3_iva_idle(void);
++#endif
+ 
+ /*
+  * Initialize IVA to a idle state. This is typically done by the
+@@ -425,8 +427,9 @@ static void __init omap2_clk_iva_init_to_idle(void)
+ 	prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
+ 	prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
+ 
++#ifdef CONFIG_PM	
+ 	omap3_iva_idle();
+-
++#endif
+ }
+ 
+ /* REVISIT: Move this init stuff out into clock.c */
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/0048-HACK-try-to-poweron-stuff-on-xM-rev-A.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/0048-HACK-try-to-poweron-stuff-on-xM-rev-A.patch
new file mode 100644
index 0000000..19a235a
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/0048-HACK-try-to-poweron-stuff-on-xM-rev-A.patch
@@ -0,0 +1,60 @@
+From 258a962bea2da43df6f70fd264a0e23b65669176 Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@dominion.thruhere.net>
+Date: Tue, 4 May 2010 17:04:27 +0200
+Subject: [PATCH 48/48] HACK: try to poweron stuff on xM rev A
+
+---
+ arch/arm/mach-omap2/board-omap3beagle.c |   14 +++++++-------
+ 1 files changed, 7 insertions(+), 7 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index b313350..7f0e241 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -237,7 +237,6 @@ static struct omap_dss_device beagle_dvi_device = {
+ 	.name = "dvi",
+ 	.driver_name = "generic_panel",
+ 	.phy.dpi.data_lines = 24,
+-	.reset_gpio = 170,
+ 	.platform_enable = beagle_enable_dvi,
+ 	.platform_disable = beagle_disable_dvi,
+ };
+@@ -364,6 +363,9 @@ static int beagle_twl_gpio_setup(struct device *dev,
+ 	 */
+ 
+ 	if (cpu_is_omap3630()) {
++		/* DVI reset GPIO is different between revisions */	
++		beagle_dvi_device.reset_gpio = 129;
++
+ 		/* Power on DVI, Serial and PWR led */ 
+  		gpio_request(gpio + 1, "nDVI_PWR_EN");
+ 		gpio_direction_output(gpio + 1, 0);	
+@@ -374,9 +376,12 @@ static int beagle_twl_gpio_setup(struct device *dev,
+ 
+ 		/* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
+ 		gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
+-		gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1);
++		gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
+ 	}
+ 	else {
++		/* DVI reset GPIO is different between revisions */ 
++		beagle_dvi_device.reset_gpio = 170;
++				
+ 		gpio_request(gpio + 1, "EHCI_nOC");
+ 		gpio_direction_input(gpio + 1);
+ 
+@@ -735,11 +740,6 @@ static void __init omap3_beagle_init(void)
+ 			ARRAY_SIZE(omap3_beagle_devices));
+ 	omap_serial_init();
+ 
+-	omap_mux_init_gpio(170, OMAP_PIN_INPUT);
+-	gpio_request(170, "DVI_nPD");
+-	/* REVISIT leave DVI powered down until it's needed ... */
+-	gpio_direction_output(170, true);
+-
+ 	if(!strcmp(expansionboard_name, "zippy")) 
+ 	{
+ 		printk(KERN_INFO "Beagle expansionboard: initializing enc28j60\n");
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/am3517-evm/defconfig b/recipes-bsp/linux/linux-omap-psp-2.6.32/am3517-evm/defconfig
new file mode 100644
index 0000000..5073dc7
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/am3517-evm/defconfig
@@ -0,0 +1,2140 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32
+# Tue Mar 16 19:08:26 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_INTEGRITY=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_LL_DEBUG_NONE is not set
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+# CONFIG_OMAP_PM_SRF is not set
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+CONFIG_OMAP_PACKAGE_CBB=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+CONFIG_MACH_OMAP3517EVM=y
+CONFIG_PMIC_TPS65023=y
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_OMAP_ZOOM3 is not set
+# CONFIG_MACH_CM_T35 is not set
+# CONFIG_MACH_IGEP0020 is not set
+# CONFIG_MACH_OMAP_3630SDP is not set
+# CONFIG_OMAP3_EMU is not set
+# CONFIG_OMAP3_SDRC_AC_TIMING is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=" debug "
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_CAN=y
+CONFIG_CAN_RAW=y
+CONFIG_CAN_BCM=y
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=y
+CONFIG_CAN_DEV=y
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_TI_HECC=y
+# CONFIG_CAN_SJA1000 is not set
+
+#
+# CAN USB interfaces
+#
+# CONFIG_CAN_EMS_USB is not set
+CONFIG_CAN_DEBUG_DEVICES=y
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=""
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_OMAP2=y
+# CONFIG_MTD_NAND_OMAP_PREFETCH is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_DRBD is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID6_PQ=m
+CONFIG_ASYNC_RAID6_TEST=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+CONFIG_DM_DELAY=m
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+CONFIG_TI_DAVINCI_EMAC=y
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+CONFIG_WLAN=y
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET=y
+# CONFIG_USB_NET_AX8817X is not set
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_CDC_EEM is not set
+CONFIG_USB_NET_DM9601=y
+# CONFIG_USB_NET_SMSC95XX is not set
+# CONFIG_USB_NET_GL620A is not set
+# CONFIG_USB_NET_NET1080 is not set
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+# CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_KEYBOARD_TCA6416=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+CONFIG_TOUCHSCREEN_TSC2004=y
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+CONFIG_GPIO_PCA953X=y
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_LP3971 is not set
+CONFIG_REGULATOR_TPS65023=y
+# CONFIG_REGULATOR_TPS6507X is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_SG=y
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DMA_CONTIG=y
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_IR=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+CONFIG_VIDEO_MSP3400=m
+# CONFIG_VIDEO_CS5345 is not set
+CONFIG_VIDEO_CS53L32A=m
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+CONFIG_VIDEO_WM8775=m
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# RDS decoders
+#
+# CONFIG_VIDEO_SAA6588 is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_ADV7180 is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_MT9V011 is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_MT9P012 is not set
+# CONFIG_VIDEO_MT9T111 is not set
+# CONFIG_VIDEO_DW9710 is not set
+# CONFIG_VIDEO_OV3640 is not set
+# CONFIG_VIDEO_IMX046 is not set
+# CONFIG_VIDEO_LV8093 is not set
+# CONFIG_VIDEO_SAA7110 is not set
+CONFIG_VIDEO_SAA711X=m
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_SAA7191 is not set
+CONFIG_VIDEO_TVP514X=y
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_VPX3220 is not set
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+CONFIG_VIDEO_VIVI=m
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_AU0828 is not set
+CONFIG_TI_MEDIA=y
+CONFIG_VIDEO_VPSS_SYSTEM=y
+CONFIG_VIDEO_VPFE_CAPTURE=y
+CONFIG_VIDEO_DM6446_CCDC=y
+# CONFIG_VIDEO_DM355_CCDC is not set
+CONFIG_VIDEO_OMAP2_VOUT=y
+# CONFIG_VIDEO_OMAP3 is not set
+# CONFIG_VIDEO_OMAP34XX_ISP_PREVIEWER is not set
+# CONFIG_VIDEO_OMAP34XX_ISP_RESIZER is not set
+# CONFIG_SOC_CAMERA is not set
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=y
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+CONFIG_USB_GL860=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_JEILINJ=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7302=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SN9C20X_EVDEV=y
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STV0680=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_CX231XX_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_VIDEO_USBVIDEO=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+CONFIG_USB_QUICKCAM_MESSENGER=m
+CONFIG_USB_ET61X251=m
+CONFIG_VIDEO_OVCAMCHIP=m
+CONFIG_USB_W9968CF=m
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+CONFIG_USB_ZC0301=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+# CONFIG_RADIO_ADAPTERS is not set
+CONFIG_DVB_MAX_ADAPTERS=8
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+# CONFIG_TTPCI_EEPROM is not set
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_DW2102=m
+CONFIG_DVB_USB_CINERGY_T2=m
+CONFIG_DVB_USB_ANYSEE=m
+CONFIG_DVB_USB_DTV5100=m
+CONFIG_DVB_USB_AF9015=m
+CONFIG_DVB_USB_CE6230=m
+CONFIG_DVB_USB_FRIIO=m
+CONFIG_DVB_USB_EC168=m
+# CONFIG_SMS_SIANO_MDTV is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+# CONFIG_DVB_B2C2_FLEXCOP is not set
+
+#
+# Supported DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+CONFIG_DVB_MT312=m
+CONFIG_DVB_ZL10039=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_SI21XX=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_AF9013=m
+CONFIG_DVB_EC100=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_S5H1411=m
+CONFIG_DVB_DIB8000=m
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_LGS8GL5=m
+CONFIG_DAB=y
+CONFIG_USB_DABUSB=m
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_OMAP2_VRAM=y
+CONFIG_OMAP2_VRFB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=14
+# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
+# CONFIG_OMAP2_DSS_RFBI is not set
+CONFIG_OMAP2_DSS_VENC=y
+CONFIG_OMAP2_VENC_OUT_TYPE_SVIDEO=y
+# CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE is not set
+# CONFIG_OMAP2_DSS_SDI is not set
+CONFIG_OMAP2_DSS_DSI=y
+CONFIG_OMAP2_DSS_USE_DSI_PLL=y
+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=1
+CONFIG_FB_OMAP2=y
+# CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set
+# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
+CONFIG_FB_OMAP2_NUM_FBS=3
+
+#
+# OMAP2/3 Display Device Drivers
+#
+CONFIG_PANEL_GENERIC=y
+# CONFIG_PANEL_LGPHILIPS_LB035Q02 is not set
+# CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C is not set
+# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
+CONFIG_PANEL_SHARP_LQ043T1DG01=y
+# CONFIG_PANEL_TAAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_HRTIMER=m
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=y
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_MCBSP=y
+CONFIG_SND_OMAP_SOC_AM3517EVM=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_TLV320AIC23=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+# CONFIG_USB_TI_CPPI_DMA is not set
+CONFIG_USB_TI_CPPI41_DMA=y
+CONFIG_USB_MUSB_DEBUG=y
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=y
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_USB_ULPI is not set
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+CONFIG_RTC_DRV_S35390A=y
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_FS_JOURNAL_INFO=y
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
+CONFIG_ASYNC_PQ=m
+CONFIG_ASYNC_RAID6_RECOV=m
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/am37x-evm/defconfig b/recipes-bsp/linux/linux-omap-psp-2.6.32/am37x-evm/defconfig
new file mode 100644
index 0000000..8f1868d
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/am37x-evm/defconfig
@@ -0,0 +1,2024 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32
+# Fri Jul  9 10:08:46 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_OPROFILE_ARMV7=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+CONFIG_OMAP_SMARTREFLEX=y
+# CONFIG_OMAP_SMARTREFLEX_TESTING is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_IOMMU=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
+# CONFIG_OMAP3_DEBOBS is not set
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+# CONFIG_OMAP_LL_DEBUG_NONE is not set
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+# CONFIG_OMAP_PM_SRF is not set
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+CONFIG_OMAP_PACKAGE_CBB=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+CONFIG_MACH_OMAP3EVM=y
+CONFIG_PMIC_TWL4030=y
+# CONFIG_MACH_OMAP3517EVM is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_OMAP_ZOOM3 is not set
+# CONFIG_MACH_CM_T35 is not set
+# CONFIG_MACH_IGEP0020 is not set
+# CONFIG_MACH_OMAP_3630SDP is not set
+# CONFIG_OMAP3_EMU is not set
+# CONFIG_OMAP3_SDRC_AC_TIMING is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_USER_L2_PLE is not set
+# CONFIG_USER_PMON is not set
+CONFIG_ARM_ERRATA_430973=y
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+CONFIG_CPU_V7_SYSFS=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=" debug "
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=""
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_OMAP_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_OMAP2=y
+# CONFIG_MTD_NAND_OMAP_PREFETCH is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+# CONFIG_MTD_ONENAND_GENERIC is not set
+CONFIG_MTD_ONENAND_OMAP2=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_TI_DAVINCI_EMAC is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET=y
+# CONFIG_USB_NET_AX8817X is not set
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_CDC_EEM is not set
+CONFIG_USB_NET_DM9601=y
+# CONFIG_USB_NET_SMSC95XX is not set
+# CONFIG_USB_NET_GL620A is not set
+# CONFIG_USB_NET_NET1080 is not set
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+# CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_TWL4030=y
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_TSC2004 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+# CONFIG_SPI_XILINX is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+# CONFIG_TWL4030_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_TWL4030_POWER is not set
+CONFIG_TWL4030_CODEC=y
+# CONFIG_TWL4030_MADC is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=y
+CONFIG_MEDIA_TUNER_TDA8290=y
+CONFIG_MEDIA_TUNER_TDA9887=y
+CONFIG_MEDIA_TUNER_TEA5761=y
+CONFIG_MEDIA_TUNER_TEA5767=y
+CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER_XC2028=y
+CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_MEDIA_TUNER_MC44S803=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_SG=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# RDS decoders
+#
+# CONFIG_VIDEO_SAA6588 is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_ADV7180 is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_MT9V011 is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_MT9P012 is not set
+# CONFIG_VIDEO_MT9T111 is not set
+# CONFIG_VIDEO_DW9710 is not set
+# CONFIG_VIDEO_OV3640 is not set
+# CONFIG_VIDEO_IMX046 is not set
+# CONFIG_VIDEO_LV8093 is not set
+# CONFIG_VIDEO_SAA7110 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_SAA7191 is not set
+CONFIG_VIDEO_TVP514X=y
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_VPX3220 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+CONFIG_TI_MEDIA=y
+# CONFIG_VIDEO_VPSS_SYSTEM is not set
+# CONFIG_VIDEO_VPFE_CAPTURE is not set
+CONFIG_VIDEO_OMAP2_VOUT=y
+CONFIG_VIDEO_OMAP3=y
+CONFIG_VIDEO_OMAP3_ISP=y
+# CONFIG_VIDEO_OMAP34XX_ISP_PREVIEWER is not set
+CONFIG_VIDEO_OMAP34XX_ISP_RESIZER=y
+# CONFIG_SOC_CAMERA is not set
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=y
+# CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV is not set
+# CONFIG_USB_GSPCA is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_HDPVR is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_CX231XX is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_ET61X251 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_PWC is not set
+# CONFIG_USB_PWC_INPUT_EVDEV is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_TMIO is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_OMAP2_VRAM=y
+CONFIG_OMAP2_VRFB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=4
+# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
+# CONFIG_OMAP2_DSS_RFBI is not set
+CONFIG_OMAP2_DSS_VENC=y
+CONFIG_OMAP2_VENC_OUT_TYPE_SVIDEO=y
+# CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE is not set
+# CONFIG_OMAP2_DSS_SDI is not set
+CONFIG_OMAP2_DSS_DSI=y
+CONFIG_OMAP2_DSS_USE_DSI_PLL=y
+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=1
+CONFIG_FB_OMAP2=y
+# CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set
+# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
+CONFIG_FB_OMAP2_NUM_FBS=1
+
+#
+# OMAP2/3 Display Device Drivers
+#
+CONFIG_PANEL_GENERIC=y
+# CONFIG_PANEL_LGPHILIPS_LB035Q02 is not set
+# CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C is not set
+CONFIG_PANEL_SHARP_LS037V7DW01=y
+# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set
+# CONFIG_PANEL_TAAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=y
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_MCBSP=y
+CONFIG_SND_OMAP_SOC_OMAP3EVM=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_TWL4030=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+CONFIG_MUSB_USE_SYSTEM_DMA_RX=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_TI_CPPI41_DMA is not set
+CONFIG_USB_MUSB_DEBUG=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=y
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_TWL4030_USB is not set
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+CONFIG_RTC_DRV_TWL4030=y
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_FS_JOURNAL_INFO=y
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/beagleboard/configs/cpuidle b/recipes-bsp/linux/linux-omap-psp-2.6.32/beagleboard/configs/cpuidle
new file mode 100644
index 0000000..06e3879
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/beagleboard/configs/cpuidle
@@ -0,0 +1,3053 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32
+# Thu Jul 22 14:16:08 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_OPROFILE_ARMV7=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_SLOW_WORK=y
+# CONFIG_SLOW_WORK_DEBUG is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+CONFIG_OMAP_SMARTREFLEX=y
+# CONFIG_OMAP_SMARTREFLEX_TESTING is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+# CONFIG_OMAP_MUX is not set
+CONFIG_OMAP_MCBSP=y
+CONFIG_OMAP_MBOX_FWK=m
+CONFIG_OMAP_IOMMU=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
+# CONFIG_OMAP3_DEBOBS is not set
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_LL_DEBUG_NONE is not set
+# CONFIG_OMAP_PM_NONE is not set
+# CONFIG_OMAP_PM_NOOP is not set
+CONFIG_OMAP_PM_SRF=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+CONFIG_OMAP_PACKAGE_CBB=y
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP3_BEAGLE=y
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_OMAP3517EVM is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_OMAP_ZOOM3 is not set
+# CONFIG_MACH_CM_T35 is not set
+# CONFIG_MACH_IGEP0020 is not set
+# CONFIG_MACH_OMAP_3630SDP is not set
+# CONFIG_OMAP3_EMU is not set
+# CONFIG_OMAP3_SDRC_AC_TIMING is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_THUMBEE=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_USER_L2_PLE=y
+CONFIG_USER_PMON=y
+CONFIG_ARM_ERRATA_430973=y
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_LEDS=y
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+CONFIG_CPU_V7_SYSFS=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=" debug "
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_DEBUG=y
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+# CONFIG_DEFAULT_BIC is not set
+CONFIG_DEFAULT_CUBIC=y
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+# CONFIG_IPV6_PIMSM_V2 is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+CONFIG_IP_VS=m
+CONFIG_IP_VS_IPV6=y
+CONFIG_IP_VS_DEBUG=y
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=y
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=y
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_RDS is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=m
+# CONFIG_CAN_DEV is not set
+# CONFIG_CAN_DEBUG_DEVICES is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_ULTRA=y
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+CONFIG_IRDA_DEBUG=y
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+CONFIG_DONGLE=y
+CONFIG_ESI_DONGLE=m
+CONFIG_ACTISYS_DONGLE=m
+CONFIG_TEKRAM_DONGLE=m
+CONFIG_TOIM3232_DONGLE=m
+CONFIG_LITELINK_DONGLE=m
+CONFIG_MA600_DONGLE=m
+CONFIG_GIRBIL_DONGLE=m
+CONFIG_MCP2120_DONGLE=m
+CONFIG_OLD_BELKIN_DONGLE=m
+# CONFIG_ACT200L_DONGLE is not set
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_MRVL is not set
+CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_DEBUG is not set
+# CONFIG_RXKAD is not set
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_RC_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_WIMAX=m
+CONFIG_WIMAX_DEBUG_LEVEL=8
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_NET_9P=m
+# CONFIG_NET_9P_DEBUG is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=""
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_OMAP_PREFETCH=y
+# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
+# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=m
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+CONFIG_EEPROM_93CX6=y
+CONFIG_IWMC3200TOP=m
+# CONFIG_IWMC3200TOP_DEBUG is not set
+# CONFIG_IWMC3200TOP_DEBUGFS is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID6_PQ=m
+# CONFIG_ASYNC_RAID6_TEST is not set
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+# CONFIG_DM_LOG_USERSPACE is not set
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+# CONFIG_DM_MULTIPATH_QL is not set
+# CONFIG_DM_MULTIPATH_ST is not set
+CONFIG_DM_DELAY=m
+# CONFIG_DM_UEVENT is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_TI_DAVINCI_EMAC is not set
+# CONFIG_DM9000 is not set
+CONFIG_ENC28J60=y
+# CONFIG_ENC28J60_WRITEVERIFY is not set
+# CONFIG_ETHOC is not set
+CONFIG_SMC911X=y
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+CONFIG_KS8851=y
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_LIBERTAS_THINFIRM is not set
+CONFIG_AT76C50X_USB=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_ATH_COMMON is not set
+CONFIG_B43=m
+# CONFIG_B43_SDIO is not set
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+# CONFIG_B43LEGACY is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+# CONFIG_IWM is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+# CONFIG_LIBERTAS_SDIO is not set
+# CONFIG_LIBERTAS_SPI is not set
+# CONFIG_LIBERTAS_DEBUG is not set
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+# CONFIG_P54_SPI is not set
+CONFIG_P54_LEDS=y
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+# CONFIG_RT2800USB is not set
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_WL12XX=m
+CONFIG_WL1251=m
+CONFIG_WL1251_SPI=m
+CONFIG_WL1251_SDIO=m
+CONFIG_WL1271=m
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+
+#
+# WiMAX Wireless Broadband devices
+#
+CONFIG_WIMAX_I2400M=m
+CONFIG_WIMAX_I2400M_USB=m
+CONFIG_WIMAX_I2400M_SDIO=m
+CONFIG_WIMAX_IWMC3200_SDIO=y
+CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=y
+CONFIG_USB_KAWETH=y
+CONFIG_USB_PEGASUS=y
+CONFIG_USB_RTL8150=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_CDC_EEM is not set
+CONFIG_USB_NET_DM9601=y
+CONFIG_USB_NET_SMSC95XX=y
+CONFIG_USB_NET_GL620A=y
+CONFIG_USB_NET_NET1080=y
+CONFIG_USB_NET_PLUSB=y
+CONFIG_USB_NET_MCS7830=y
+CONFIG_USB_NET_RNDIS_HOST=y
+CONFIG_USB_NET_CDC_SUBSET=y
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+CONFIG_USB_NET_ZAURUS=y
+CONFIG_USB_HSO=m
+CONFIG_USB_NET_INT51X1=m
+# CONFIG_WAN is not set
+CONFIG_ATM_DRIVERS=y
+# CONFIG_ATM_DUMMY is not set
+# CONFIG_ATM_TCP is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_PPPOATM is not set
+CONFIG_PPPOL2TP=m
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_TWL4030 is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_TWL4030_PWRBUTTON=y
+CONFIG_INPUT_UINPUT=y
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+# CONFIG_SPI_XILINX is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=m
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+CONFIG_THERMAL=y
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+# CONFIG_TWL4030_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+# CONFIG_SSB_SDIOHOST is not set
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSB_DEBUG is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+CONFIG_TWL4030_POWER=y
+CONFIG_TWL4030_CODEC=y
+# CONFIG_TWL4030_MADC is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+CONFIG_MEDIA_TUNER_CUSTOMISE=y
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_SG=y
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DMA_CONTIG=y
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_IR=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+CONFIG_VIDEO_MSP3400=m
+# CONFIG_VIDEO_CS5345 is not set
+CONFIG_VIDEO_CS53L32A=m
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+CONFIG_VIDEO_WM8775=m
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# RDS decoders
+#
+# CONFIG_VIDEO_SAA6588 is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_ADV7180 is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_OV7670 is not set
+CONFIG_VIDEO_MT9V011=m
+CONFIG_VIDEO_MT9V113=m
+# CONFIG_VIDEO_TCM825X is not set
+CONFIG_VIDEO_MT9P012=m
+CONFIG_VIDEO_MT9T112=m
+# CONFIG_VIDEO_DW9710 is not set
+# CONFIG_VIDEO_OV3640 is not set
+# CONFIG_VIDEO_IMX046 is not set
+# CONFIG_VIDEO_LV8093 is not set
+# CONFIG_VIDEO_SAA7110 is not set
+CONFIG_VIDEO_SAA711X=m
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_SAA7191 is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_VPX3220 is not set
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+CONFIG_VIDEO_VIVI=m
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_AU0828 is not set
+CONFIG_TI_MEDIA=y
+CONFIG_VIDEO_VPSS_SYSTEM=y
+CONFIG_VIDEO_VPFE_CAPTURE=y
+# CONFIG_VIDEO_DM6446_CCDC is not set
+# CONFIG_VIDEO_DM355_CCDC is not set
+CONFIG_VIDEO_OMAP2_VOUT=y
+CONFIG_VIDEO_OMAP3=y
+CONFIG_VIDEO_OMAP3_ISP=y
+CONFIG_VIDEO_OMAP34XX_ISP_PREVIEWER=y
+CONFIG_VIDEO_OMAP34XX_ISP_RESIZER=y
+# CONFIG_SOC_CAMERA is not set
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+# CONFIG_USB_GL860 is not set
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+# CONFIG_USB_GSPCA_JEILINJ is not set
+CONFIG_USB_GSPCA_MARS=m
+# CONFIG_USB_GSPCA_MR97310A is not set
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_PAC207=m
+# CONFIG_USB_GSPCA_PAC7302 is not set
+CONFIG_USB_GSPCA_PAC7311=m
+# CONFIG_USB_GSPCA_SN9C20X is not set
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+CONFIG_USB_GSPCA_STK014=m
+# CONFIG_USB_GSPCA_STV0680 is not set
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_CX231XX=m
+# CONFIG_VIDEO_CX231XX_ALSA is not set
+CONFIG_VIDEO_CX231XX_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_VIDEO_USBVIDEO=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+CONFIG_USB_QUICKCAM_MESSENGER=m
+CONFIG_USB_ET61X251=m
+CONFIG_VIDEO_OVCAMCHIP=m
+CONFIG_USB_W9968CF=m
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+CONFIG_USB_ZC0301=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_I2C_SI4713 is not set
+# CONFIG_RADIO_SI4713 is not set
+# CONFIG_USB_DSBR is not set
+# CONFIG_RADIO_SI470X is not set
+# CONFIG_USB_MR800 is not set
+# CONFIG_RADIO_TEA5764 is not set
+# CONFIG_RADIO_TEF6862 is not set
+CONFIG_DVB_MAX_ADAPTERS=8
+CONFIG_DVB_DYNAMIC_MINORS=y
+CONFIG_DVB_CAPTURE_DRIVERS=y
+# CONFIG_TTPCI_EEPROM is not set
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_DW2102=m
+CONFIG_DVB_USB_CINERGY_T2=m
+CONFIG_DVB_USB_ANYSEE=m
+CONFIG_DVB_USB_DTV5100=m
+CONFIG_DVB_USB_AF9015=m
+# CONFIG_DVB_USB_CE6230 is not set
+# CONFIG_DVB_USB_FRIIO is not set
+# CONFIG_DVB_USB_EC168 is not set
+# CONFIG_SMS_SIANO_MDTV is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_ZL10039=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_SI21XX=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_AF9013=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_S5H1411=m
+CONFIG_DVB_DIB8000=m
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_LGS8GL5=m
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_TMIO is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_OMAP2_VRAM=y
+CONFIG_OMAP2_VRFB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=14
+CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
+# CONFIG_OMAP2_DSS_RFBI is not set
+CONFIG_OMAP2_DSS_VENC=y
+CONFIG_OMAP2_VENC_OUT_TYPE_SVIDEO=y
+# CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE is not set
+# CONFIG_OMAP2_DSS_SDI is not set
+CONFIG_OMAP2_DSS_DSI=y
+CONFIG_OMAP2_DSS_USE_DSI_PLL=y
+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
+CONFIG_FB_OMAP2=y
+CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
+# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
+CONFIG_FB_OMAP2_NUM_FBS=3
+
+#
+# OMAP2/3 Display Device Drivers
+#
+CONFIG_PANEL_GENERIC=y
+# CONFIG_PANEL_LGPHILIPS_LB035Q02 is not set
+# CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C is not set
+CONFIG_PANEL_SHARP_LS037V7DW01=y
+# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set
+# CONFIG_PANEL_TAAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_RAWMIDI_SEQ=m
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=y
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_MCBSP=y
+CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_TWL4030=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+# CONFIG_HID_DRAGONRISE is not set
+CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
+CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+CONFIG_HID_TOPSEED=y
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_U132_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+CONFIG_MUSB_USE_SYSTEM_DMA_RX=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_TI_CPPI41_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP210X is not set
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+# CONFIG_USB_SERIAL_SYMBOL is not set
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_BERRY_CHARGE=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+# CONFIG_USB_APPLEDISPLAY is not set
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+CONFIG_USB_VST=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=480
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ZERO_HNPTEST=y
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_MASS_STORAGE is not set
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_MIDI_GADGET=m
+CONFIG_USB_G_PRINTER=m
+CONFIG_USB_CDC_COMPOSITE=m
+# CONFIG_USB_G_MULTI is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=y
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_USB_ULPI is not set
+CONFIG_TWL4030_USB=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+CONFIG_RTC_DRV_TWL4030=m
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+
+#
+# TI VLYNQ
+#
+CONFIG_STAGING=y
+# CONFIG_STAGING_EXCLUDE_BUILD is not set
+# CONFIG_USB_IP_COMMON is not set
+CONFIG_W35UND=m
+# CONFIG_PRISM2_USB is not set
+CONFIG_ECHO=m
+CONFIG_OTUS=m
+# CONFIG_COMEDI is not set
+# CONFIG_ASUS_OLED is not set
+CONFIG_RTL8192SU=m
+# CONFIG_INPUT_MIMIO is not set
+# CONFIG_TRANZPORT is not set
+
+#
+# Qualcomm MSM Camera And Video
+#
+
+#
+# Camera Sensor Selection
+#
+# CONFIG_INPUT_GPIO is not set
+# CONFIG_DST is not set
+# CONFIG_POHMELFS is not set
+# CONFIG_PLAN9AUTH is not set
+# CONFIG_LINE6_USB is not set
+# CONFIG_USB_SERIAL_QUATECH2 is not set
+# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
+# CONFIG_VT6656 is not set
+# CONFIG_FB_UDL is not set
+
+#
+# RAR Register Driver
+#
+# CONFIG_RAR_REGISTER is not set
+# CONFIG_IIO is not set
+# CONFIG_RAMZSWAP is not set
+# CONFIG_BATMAN_ADV is not set
+# CONFIG_STRIP is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_FS_JOURNAL_INFO=y
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+# CONFIG_EXT4_FS_POSIX_ACL is not set
+# CONFIG_EXT4_FS_SECURITY is not set
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+CONFIG_REISERFS_PROC_INFO=y
+CONFIG_REISERFS_FS_XATTR=y
+# CONFIG_REISERFS_FS_POSIX_ACL is not set
+# CONFIG_REISERFS_FS_SECURITY is not set
+CONFIG_JFS_FS=m
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=m
+# CONFIG_GFS2_FS_LOCKING_DLM is not set
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+CONFIG_OCFS2_FS_STATS=y
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+CONFIG_BTRFS_FS=m
+# CONFIG_BTRFS_FS_POSIX_ACL is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+# CONFIG_CUSE is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+# CONFIG_ECRYPT_FS is not set
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+# CONFIG_JFFS2_CMODE_PRIORITY is not set
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_JFFS2_CMODE_FAVOURLZO=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_ROMFS_FS=m
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_STATS2=y
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+CONFIG_CIFS_EXPERIMENTAL=y
+CONFIG_NCP_FS=m
+# CONFIG_NCPFS_PACKET_SIGNING is not set
+# CONFIG_NCPFS_IOCTL_LOCKING is not set
+# CONFIG_NCPFS_STRONG is not set
+# CONFIG_NCPFS_NFS_NS is not set
+# CONFIG_NCPFS_OS2_NS is not set
+# CONFIG_NCPFS_SMALLDOS is not set
+# CONFIG_NCPFS_NLS is not set
+# CONFIG_NCPFS_EXTRAS is not set
+CONFIG_CODA_FS=m
+CONFIG_AFS_FS=m
+# CONFIG_AFS_DEBUG is not set
+CONFIG_9P_FS=m
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+# CONFIG_UNIXWARE_DISKLABEL is not set
+CONFIG_LDM_PARTITION=y
+CONFIG_LDM_DEBUG=y
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
+CONFIG_ASYNC_PQ=m
+CONFIG_ASYNC_RAID6_RECOV=m
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_FIPS=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_GHASH=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_HW=y
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/beagleboard/configs/cpuidle-gether b/recipes-bsp/linux/linux-omap-psp-2.6.32/beagleboard/configs/cpuidle-gether
new file mode 100644
index 0000000..7261927
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/beagleboard/configs/cpuidle-gether
@@ -0,0 +1,3051 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32
+# Mon Jul 26 11:37:13 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_OPROFILE_ARMV7=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_SLOW_WORK=y
+# CONFIG_SLOW_WORK_DEBUG is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+CONFIG_OMAP_SMARTREFLEX=y
+# CONFIG_OMAP_SMARTREFLEX_TESTING is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+# CONFIG_OMAP_MUX is not set
+CONFIG_OMAP_MCBSP=y
+CONFIG_OMAP_MBOX_FWK=m
+CONFIG_OMAP_IOMMU=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
+# CONFIG_OMAP3_DEBOBS is not set
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_LL_DEBUG_NONE is not set
+# CONFIG_OMAP_PM_NONE is not set
+# CONFIG_OMAP_PM_NOOP is not set
+CONFIG_OMAP_PM_SRF=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+CONFIG_OMAP_PACKAGE_CBB=y
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP3_BEAGLE=y
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_OMAP3517EVM is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_OMAP_ZOOM3 is not set
+# CONFIG_MACH_CM_T35 is not set
+# CONFIG_MACH_IGEP0020 is not set
+# CONFIG_MACH_OMAP_3630SDP is not set
+# CONFIG_OMAP3_EMU is not set
+# CONFIG_OMAP3_SDRC_AC_TIMING is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_THUMBEE=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_USER_L2_PLE=y
+CONFIG_USER_PMON=y
+CONFIG_ARM_ERRATA_430973=y
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_LEDS=y
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+CONFIG_CPU_V7_SYSFS=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=" debug "
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_DEBUG=y
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+# CONFIG_DEFAULT_BIC is not set
+CONFIG_DEFAULT_CUBIC=y
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+# CONFIG_IPV6_PIMSM_V2 is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+CONFIG_IP_VS=m
+CONFIG_IP_VS_IPV6=y
+CONFIG_IP_VS_DEBUG=y
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=y
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=y
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_RDS is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=m
+# CONFIG_CAN_DEV is not set
+# CONFIG_CAN_DEBUG_DEVICES is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_ULTRA=y
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+CONFIG_IRDA_DEBUG=y
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+CONFIG_DONGLE=y
+CONFIG_ESI_DONGLE=m
+CONFIG_ACTISYS_DONGLE=m
+CONFIG_TEKRAM_DONGLE=m
+CONFIG_TOIM3232_DONGLE=m
+CONFIG_LITELINK_DONGLE=m
+CONFIG_MA600_DONGLE=m
+CONFIG_GIRBIL_DONGLE=m
+CONFIG_MCP2120_DONGLE=m
+CONFIG_OLD_BELKIN_DONGLE=m
+# CONFIG_ACT200L_DONGLE is not set
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_MRVL is not set
+CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_DEBUG is not set
+# CONFIG_RXKAD is not set
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_RC_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_WIMAX=m
+CONFIG_WIMAX_DEBUG_LEVEL=8
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_NET_9P=m
+# CONFIG_NET_9P_DEBUG is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=""
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_OMAP_PREFETCH=y
+# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
+# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=m
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+CONFIG_EEPROM_93CX6=y
+CONFIG_IWMC3200TOP=m
+# CONFIG_IWMC3200TOP_DEBUG is not set
+# CONFIG_IWMC3200TOP_DEBUGFS is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID6_PQ=m
+# CONFIG_ASYNC_RAID6_TEST is not set
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+# CONFIG_DM_LOG_USERSPACE is not set
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+# CONFIG_DM_MULTIPATH_QL is not set
+# CONFIG_DM_MULTIPATH_ST is not set
+CONFIG_DM_DELAY=m
+# CONFIG_DM_UEVENT is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_TI_DAVINCI_EMAC is not set
+# CONFIG_DM9000 is not set
+CONFIG_ENC28J60=y
+# CONFIG_ENC28J60_WRITEVERIFY is not set
+# CONFIG_ETHOC is not set
+CONFIG_SMC911X=y
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+CONFIG_KS8851=y
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_LIBERTAS_THINFIRM is not set
+CONFIG_AT76C50X_USB=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_ATH_COMMON is not set
+CONFIG_B43=m
+# CONFIG_B43_SDIO is not set
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+# CONFIG_B43LEGACY is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+# CONFIG_IWM is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+# CONFIG_LIBERTAS_SDIO is not set
+# CONFIG_LIBERTAS_SPI is not set
+# CONFIG_LIBERTAS_DEBUG is not set
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+# CONFIG_P54_SPI is not set
+CONFIG_P54_LEDS=y
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+# CONFIG_RT2800USB is not set
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_WL12XX=m
+CONFIG_WL1251=m
+CONFIG_WL1251_SPI=m
+CONFIG_WL1251_SDIO=m
+CONFIG_WL1271=m
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+
+#
+# WiMAX Wireless Broadband devices
+#
+CONFIG_WIMAX_I2400M=m
+CONFIG_WIMAX_I2400M_USB=m
+CONFIG_WIMAX_I2400M_SDIO=m
+CONFIG_WIMAX_IWMC3200_SDIO=y
+CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=y
+CONFIG_USB_KAWETH=y
+CONFIG_USB_PEGASUS=y
+CONFIG_USB_RTL8150=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_CDC_EEM is not set
+CONFIG_USB_NET_DM9601=y
+CONFIG_USB_NET_SMSC95XX=y
+CONFIG_USB_NET_GL620A=y
+CONFIG_USB_NET_NET1080=y
+CONFIG_USB_NET_PLUSB=y
+CONFIG_USB_NET_MCS7830=y
+CONFIG_USB_NET_RNDIS_HOST=y
+CONFIG_USB_NET_CDC_SUBSET=y
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+CONFIG_USB_NET_ZAURUS=y
+CONFIG_USB_HSO=m
+CONFIG_USB_NET_INT51X1=m
+# CONFIG_WAN is not set
+CONFIG_ATM_DRIVERS=y
+# CONFIG_ATM_DUMMY is not set
+# CONFIG_ATM_TCP is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_PPPOATM is not set
+CONFIG_PPPOL2TP=m
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_TWL4030 is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_TWL4030_PWRBUTTON=y
+CONFIG_INPUT_UINPUT=y
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+# CONFIG_SPI_XILINX is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=m
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+CONFIG_THERMAL=y
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+# CONFIG_TWL4030_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+# CONFIG_SSB_SDIOHOST is not set
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSB_DEBUG is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+CONFIG_TWL4030_POWER=y
+CONFIG_TWL4030_CODEC=y
+# CONFIG_TWL4030_MADC is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+CONFIG_MEDIA_TUNER_CUSTOMISE=y
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_SG=y
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DMA_CONTIG=y
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_IR=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+CONFIG_VIDEO_MSP3400=m
+# CONFIG_VIDEO_CS5345 is not set
+CONFIG_VIDEO_CS53L32A=m
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+CONFIG_VIDEO_WM8775=m
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# RDS decoders
+#
+# CONFIG_VIDEO_SAA6588 is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_ADV7180 is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_OV7670 is not set
+CONFIG_VIDEO_MT9V011=m
+CONFIG_VIDEO_MT9V113=m
+# CONFIG_VIDEO_TCM825X is not set
+CONFIG_VIDEO_MT9P012=m
+CONFIG_VIDEO_MT9T112=m
+# CONFIG_VIDEO_DW9710 is not set
+# CONFIG_VIDEO_OV3640 is not set
+# CONFIG_VIDEO_IMX046 is not set
+# CONFIG_VIDEO_LV8093 is not set
+# CONFIG_VIDEO_SAA7110 is not set
+CONFIG_VIDEO_SAA711X=m
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_SAA7191 is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_VPX3220 is not set
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+CONFIG_VIDEO_VIVI=m
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_AU0828 is not set
+CONFIG_TI_MEDIA=y
+CONFIG_VIDEO_VPSS_SYSTEM=y
+CONFIG_VIDEO_VPFE_CAPTURE=y
+# CONFIG_VIDEO_DM6446_CCDC is not set
+# CONFIG_VIDEO_DM355_CCDC is not set
+CONFIG_VIDEO_OMAP2_VOUT=y
+CONFIG_VIDEO_OMAP3=y
+CONFIG_VIDEO_OMAP3_ISP=y
+CONFIG_VIDEO_OMAP34XX_ISP_PREVIEWER=y
+CONFIG_VIDEO_OMAP34XX_ISP_RESIZER=y
+# CONFIG_SOC_CAMERA is not set
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+# CONFIG_USB_GL860 is not set
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+# CONFIG_USB_GSPCA_JEILINJ is not set
+CONFIG_USB_GSPCA_MARS=m
+# CONFIG_USB_GSPCA_MR97310A is not set
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_PAC207=m
+# CONFIG_USB_GSPCA_PAC7302 is not set
+CONFIG_USB_GSPCA_PAC7311=m
+# CONFIG_USB_GSPCA_SN9C20X is not set
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+CONFIG_USB_GSPCA_STK014=m
+# CONFIG_USB_GSPCA_STV0680 is not set
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_CX231XX=m
+# CONFIG_VIDEO_CX231XX_ALSA is not set
+CONFIG_VIDEO_CX231XX_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_VIDEO_USBVIDEO=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+CONFIG_USB_QUICKCAM_MESSENGER=m
+CONFIG_USB_ET61X251=m
+CONFIG_VIDEO_OVCAMCHIP=m
+CONFIG_USB_W9968CF=m
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+CONFIG_USB_ZC0301=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_I2C_SI4713 is not set
+# CONFIG_RADIO_SI4713 is not set
+# CONFIG_USB_DSBR is not set
+# CONFIG_RADIO_SI470X is not set
+# CONFIG_USB_MR800 is not set
+# CONFIG_RADIO_TEA5764 is not set
+# CONFIG_RADIO_TEF6862 is not set
+CONFIG_DVB_MAX_ADAPTERS=8
+CONFIG_DVB_DYNAMIC_MINORS=y
+CONFIG_DVB_CAPTURE_DRIVERS=y
+# CONFIG_TTPCI_EEPROM is not set
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_DW2102=m
+CONFIG_DVB_USB_CINERGY_T2=m
+CONFIG_DVB_USB_ANYSEE=m
+CONFIG_DVB_USB_DTV5100=m
+CONFIG_DVB_USB_AF9015=m
+# CONFIG_DVB_USB_CE6230 is not set
+# CONFIG_DVB_USB_FRIIO is not set
+# CONFIG_DVB_USB_EC168 is not set
+# CONFIG_SMS_SIANO_MDTV is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_ZL10039=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_SI21XX=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_AF9013=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_S5H1411=m
+CONFIG_DVB_DIB8000=m
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_LGS8GL5=m
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_TMIO is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_OMAP2_VRAM=y
+CONFIG_OMAP2_VRFB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=14
+CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
+# CONFIG_OMAP2_DSS_RFBI is not set
+CONFIG_OMAP2_DSS_VENC=y
+CONFIG_OMAP2_VENC_OUT_TYPE_SVIDEO=y
+# CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE is not set
+# CONFIG_OMAP2_DSS_SDI is not set
+CONFIG_OMAP2_DSS_DSI=y
+CONFIG_OMAP2_DSS_USE_DSI_PLL=y
+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
+CONFIG_FB_OMAP2=y
+CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
+# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
+CONFIG_FB_OMAP2_NUM_FBS=3
+
+#
+# OMAP2/3 Display Device Drivers
+#
+CONFIG_PANEL_GENERIC=y
+# CONFIG_PANEL_LGPHILIPS_LB035Q02 is not set
+# CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C is not set
+CONFIG_PANEL_SHARP_LS037V7DW01=y
+# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set
+# CONFIG_PANEL_TAAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_RAWMIDI_SEQ=m
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=y
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_MCBSP=y
+CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_TWL4030=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+# CONFIG_HID_DRAGONRISE is not set
+CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
+CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+CONFIG_HID_TOPSEED=y
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_U132_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+CONFIG_MUSB_USE_SYSTEM_DMA_RX=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_TI_CPPI41_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP210X is not set
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+# CONFIG_USB_SERIAL_SYMBOL is not set
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_BERRY_CHARGE=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+# CONFIG_USB_APPLEDISPLAY is not set
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+CONFIG_USB_VST=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=480
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=y
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_USB_ULPI is not set
+CONFIG_TWL4030_USB=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+CONFIG_RTC_DRV_TWL4030=m
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+
+#
+# TI VLYNQ
+#
+CONFIG_STAGING=y
+# CONFIG_STAGING_EXCLUDE_BUILD is not set
+# CONFIG_USB_IP_COMMON is not set
+CONFIG_W35UND=m
+# CONFIG_PRISM2_USB is not set
+CONFIG_ECHO=m
+CONFIG_OTUS=m
+# CONFIG_COMEDI is not set
+# CONFIG_ASUS_OLED is not set
+CONFIG_RTL8192SU=m
+# CONFIG_INPUT_MIMIO is not set
+# CONFIG_TRANZPORT is not set
+
+#
+# Qualcomm MSM Camera And Video
+#
+
+#
+# Camera Sensor Selection
+#
+# CONFIG_INPUT_GPIO is not set
+# CONFIG_DST is not set
+# CONFIG_POHMELFS is not set
+# CONFIG_PLAN9AUTH is not set
+# CONFIG_LINE6_USB is not set
+# CONFIG_USB_SERIAL_QUATECH2 is not set
+# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
+# CONFIG_VT6656 is not set
+# CONFIG_FB_UDL is not set
+
+#
+# RAR Register Driver
+#
+# CONFIG_RAR_REGISTER is not set
+# CONFIG_IIO is not set
+# CONFIG_RAMZSWAP is not set
+# CONFIG_BATMAN_ADV is not set
+# CONFIG_STRIP is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_FS_JOURNAL_INFO=y
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+# CONFIG_EXT4_FS_POSIX_ACL is not set
+# CONFIG_EXT4_FS_SECURITY is not set
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+CONFIG_REISERFS_PROC_INFO=y
+CONFIG_REISERFS_FS_XATTR=y
+# CONFIG_REISERFS_FS_POSIX_ACL is not set
+# CONFIG_REISERFS_FS_SECURITY is not set
+CONFIG_JFS_FS=m
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=m
+# CONFIG_GFS2_FS_LOCKING_DLM is not set
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+CONFIG_OCFS2_FS_STATS=y
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+CONFIG_BTRFS_FS=m
+# CONFIG_BTRFS_FS_POSIX_ACL is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+# CONFIG_CUSE is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+# CONFIG_ECRYPT_FS is not set
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+# CONFIG_JFFS2_CMODE_PRIORITY is not set
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_JFFS2_CMODE_FAVOURLZO=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_ROMFS_FS=m
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_STATS2=y
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+CONFIG_CIFS_EXPERIMENTAL=y
+CONFIG_NCP_FS=m
+# CONFIG_NCPFS_PACKET_SIGNING is not set
+# CONFIG_NCPFS_IOCTL_LOCKING is not set
+# CONFIG_NCPFS_STRONG is not set
+# CONFIG_NCPFS_NFS_NS is not set
+# CONFIG_NCPFS_OS2_NS is not set
+# CONFIG_NCPFS_SMALLDOS is not set
+# CONFIG_NCPFS_NLS is not set
+# CONFIG_NCPFS_EXTRAS is not set
+CONFIG_CODA_FS=m
+CONFIG_AFS_FS=m
+# CONFIG_AFS_DEBUG is not set
+CONFIG_9P_FS=m
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+# CONFIG_UNIXWARE_DISKLABEL is not set
+CONFIG_LDM_PARTITION=y
+CONFIG_LDM_DEBUG=y
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
+CONFIG_ASYNC_PQ=m
+CONFIG_ASYNC_RAID6_RECOV=m
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_FIPS=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_GHASH=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_HW=y
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/beagleboard/defconfig b/recipes-bsp/linux/linux-omap-psp-2.6.32/beagleboard/defconfig
new file mode 100644
index 0000000..eff98b4
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/beagleboard/defconfig
@@ -0,0 +1,3053 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32
+# Wed Jul 21 12:01:38 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_OPROFILE_ARMV7=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_SLOW_WORK=y
+# CONFIG_SLOW_WORK_DEBUG is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+CONFIG_OMAP_SMARTREFLEX=y
+# CONFIG_OMAP_SMARTREFLEX_TESTING is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+# CONFIG_OMAP_MUX is not set
+CONFIG_OMAP_MCBSP=y
+CONFIG_OMAP_MBOX_FWK=m
+CONFIG_OMAP_IOMMU=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
+# CONFIG_OMAP3_DEBOBS is not set
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_LL_DEBUG_NONE is not set
+# CONFIG_OMAP_PM_NONE is not set
+# CONFIG_OMAP_PM_NOOP is not set
+CONFIG_OMAP_PM_SRF=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+CONFIG_OMAP_PACKAGE_CBB=y
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP3_BEAGLE=y
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_OMAP3517EVM is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_OMAP_ZOOM3 is not set
+# CONFIG_MACH_CM_T35 is not set
+# CONFIG_MACH_IGEP0020 is not set
+# CONFIG_MACH_OMAP_3630SDP is not set
+# CONFIG_OMAP3_EMU is not set
+# CONFIG_OMAP3_SDRC_AC_TIMING is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_THUMBEE=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_USER_L2_PLE=y
+CONFIG_USER_PMON=y
+CONFIG_ARM_ERRATA_430973=y
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_LEDS=y
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+CONFIG_CPU_V7_SYSFS=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=" debug "
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_DEBUG=y
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+# CONFIG_DEFAULT_BIC is not set
+CONFIG_DEFAULT_CUBIC=y
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+# CONFIG_IPV6_PIMSM_V2 is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+CONFIG_IP_VS=m
+CONFIG_IP_VS_IPV6=y
+CONFIG_IP_VS_DEBUG=y
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=y
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=y
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_RDS is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=m
+# CONFIG_CAN_DEV is not set
+# CONFIG_CAN_DEBUG_DEVICES is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_ULTRA=y
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+CONFIG_IRDA_DEBUG=y
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+CONFIG_DONGLE=y
+CONFIG_ESI_DONGLE=m
+CONFIG_ACTISYS_DONGLE=m
+CONFIG_TEKRAM_DONGLE=m
+CONFIG_TOIM3232_DONGLE=m
+CONFIG_LITELINK_DONGLE=m
+CONFIG_MA600_DONGLE=m
+CONFIG_GIRBIL_DONGLE=m
+CONFIG_MCP2120_DONGLE=m
+CONFIG_OLD_BELKIN_DONGLE=m
+# CONFIG_ACT200L_DONGLE is not set
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_MRVL is not set
+CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_DEBUG is not set
+# CONFIG_RXKAD is not set
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_RC_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_WIMAX=m
+CONFIG_WIMAX_DEBUG_LEVEL=8
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_NET_9P=m
+# CONFIG_NET_9P_DEBUG is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=""
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_OMAP_PREFETCH=y
+# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
+# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=m
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+CONFIG_EEPROM_93CX6=y
+CONFIG_IWMC3200TOP=m
+# CONFIG_IWMC3200TOP_DEBUG is not set
+# CONFIG_IWMC3200TOP_DEBUGFS is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID6_PQ=m
+# CONFIG_ASYNC_RAID6_TEST is not set
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+# CONFIG_DM_LOG_USERSPACE is not set
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+# CONFIG_DM_MULTIPATH_QL is not set
+# CONFIG_DM_MULTIPATH_ST is not set
+CONFIG_DM_DELAY=m
+# CONFIG_DM_UEVENT is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_TI_DAVINCI_EMAC is not set
+# CONFIG_DM9000 is not set
+CONFIG_ENC28J60=y
+# CONFIG_ENC28J60_WRITEVERIFY is not set
+# CONFIG_ETHOC is not set
+CONFIG_SMC911X=y
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+CONFIG_KS8851=y
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_LIBERTAS_THINFIRM is not set
+CONFIG_AT76C50X_USB=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_ATH_COMMON is not set
+CONFIG_B43=m
+# CONFIG_B43_SDIO is not set
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+# CONFIG_B43LEGACY is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+# CONFIG_IWM is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+# CONFIG_LIBERTAS_SDIO is not set
+# CONFIG_LIBERTAS_SPI is not set
+# CONFIG_LIBERTAS_DEBUG is not set
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+# CONFIG_P54_SPI is not set
+CONFIG_P54_LEDS=y
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+# CONFIG_RT2800USB is not set
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_WL12XX=m
+CONFIG_WL1251=m
+CONFIG_WL1251_SPI=m
+CONFIG_WL1251_SDIO=m
+CONFIG_WL1271=m
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+
+#
+# WiMAX Wireless Broadband devices
+#
+CONFIG_WIMAX_I2400M=m
+CONFIG_WIMAX_I2400M_USB=m
+CONFIG_WIMAX_I2400M_SDIO=m
+CONFIG_WIMAX_IWMC3200_SDIO=y
+CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=y
+CONFIG_USB_KAWETH=y
+CONFIG_USB_PEGASUS=y
+CONFIG_USB_RTL8150=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_CDC_EEM is not set
+CONFIG_USB_NET_DM9601=y
+CONFIG_USB_NET_SMSC95XX=y
+CONFIG_USB_NET_GL620A=y
+CONFIG_USB_NET_NET1080=y
+CONFIG_USB_NET_PLUSB=y
+CONFIG_USB_NET_MCS7830=y
+CONFIG_USB_NET_RNDIS_HOST=y
+CONFIG_USB_NET_CDC_SUBSET=y
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+CONFIG_USB_NET_ZAURUS=y
+CONFIG_USB_HSO=m
+CONFIG_USB_NET_INT51X1=m
+# CONFIG_WAN is not set
+CONFIG_ATM_DRIVERS=y
+# CONFIG_ATM_DUMMY is not set
+# CONFIG_ATM_TCP is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_PPPOATM is not set
+CONFIG_PPPOL2TP=m
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_TWL4030 is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_TWL4030_PWRBUTTON=y
+CONFIG_INPUT_UINPUT=y
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+# CONFIG_SPI_XILINX is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=m
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+CONFIG_THERMAL=y
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+# CONFIG_TWL4030_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+# CONFIG_SSB_SDIOHOST is not set
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSB_DEBUG is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+CONFIG_TWL4030_POWER=y
+CONFIG_TWL4030_CODEC=y
+# CONFIG_TWL4030_MADC is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+CONFIG_MEDIA_TUNER_CUSTOMISE=y
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_SG=y
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DMA_CONTIG=y
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_IR=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+CONFIG_VIDEO_MSP3400=m
+# CONFIG_VIDEO_CS5345 is not set
+CONFIG_VIDEO_CS53L32A=m
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+CONFIG_VIDEO_WM8775=m
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# RDS decoders
+#
+# CONFIG_VIDEO_SAA6588 is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_ADV7180 is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_OV7670 is not set
+CONFIG_VIDEO_MT9V011=m
+CONFIG_VIDEO_MT9V113=m
+# CONFIG_VIDEO_TCM825X is not set
+CONFIG_VIDEO_MT9P012=m
+CONFIG_VIDEO_MT9T112=m
+# CONFIG_VIDEO_DW9710 is not set
+# CONFIG_VIDEO_OV3640 is not set
+# CONFIG_VIDEO_IMX046 is not set
+# CONFIG_VIDEO_LV8093 is not set
+# CONFIG_VIDEO_SAA7110 is not set
+CONFIG_VIDEO_SAA711X=m
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_SAA7191 is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_VPX3220 is not set
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+CONFIG_VIDEO_VIVI=m
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_AU0828 is not set
+CONFIG_TI_MEDIA=y
+CONFIG_VIDEO_VPSS_SYSTEM=y
+CONFIG_VIDEO_VPFE_CAPTURE=y
+# CONFIG_VIDEO_DM6446_CCDC is not set
+# CONFIG_VIDEO_DM355_CCDC is not set
+CONFIG_VIDEO_OMAP2_VOUT=y
+CONFIG_VIDEO_OMAP3=y
+CONFIG_VIDEO_OMAP3_ISP=y
+CONFIG_VIDEO_OMAP34XX_ISP_PREVIEWER=y
+CONFIG_VIDEO_OMAP34XX_ISP_RESIZER=y
+# CONFIG_SOC_CAMERA is not set
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+# CONFIG_USB_GL860 is not set
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+# CONFIG_USB_GSPCA_JEILINJ is not set
+CONFIG_USB_GSPCA_MARS=m
+# CONFIG_USB_GSPCA_MR97310A is not set
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_PAC207=m
+# CONFIG_USB_GSPCA_PAC7302 is not set
+CONFIG_USB_GSPCA_PAC7311=m
+# CONFIG_USB_GSPCA_SN9C20X is not set
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+CONFIG_USB_GSPCA_STK014=m
+# CONFIG_USB_GSPCA_STV0680 is not set
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_CX231XX=m
+# CONFIG_VIDEO_CX231XX_ALSA is not set
+CONFIG_VIDEO_CX231XX_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_VIDEO_USBVIDEO=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+CONFIG_USB_QUICKCAM_MESSENGER=m
+CONFIG_USB_ET61X251=m
+CONFIG_VIDEO_OVCAMCHIP=m
+CONFIG_USB_W9968CF=m
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+CONFIG_USB_ZC0301=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_I2C_SI4713 is not set
+# CONFIG_RADIO_SI4713 is not set
+# CONFIG_USB_DSBR is not set
+# CONFIG_RADIO_SI470X is not set
+# CONFIG_USB_MR800 is not set
+# CONFIG_RADIO_TEA5764 is not set
+# CONFIG_RADIO_TEF6862 is not set
+CONFIG_DVB_MAX_ADAPTERS=8
+CONFIG_DVB_DYNAMIC_MINORS=y
+CONFIG_DVB_CAPTURE_DRIVERS=y
+# CONFIG_TTPCI_EEPROM is not set
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_DW2102=m
+CONFIG_DVB_USB_CINERGY_T2=m
+CONFIG_DVB_USB_ANYSEE=m
+CONFIG_DVB_USB_DTV5100=m
+CONFIG_DVB_USB_AF9015=m
+# CONFIG_DVB_USB_CE6230 is not set
+# CONFIG_DVB_USB_FRIIO is not set
+# CONFIG_DVB_USB_EC168 is not set
+# CONFIG_SMS_SIANO_MDTV is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_ZL10039=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_SI21XX=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_AF9013=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_S5H1411=m
+CONFIG_DVB_DIB8000=m
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_LGS8GL5=m
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_TMIO is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_OMAP2_VRAM=y
+CONFIG_OMAP2_VRFB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=14
+CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
+# CONFIG_OMAP2_DSS_RFBI is not set
+CONFIG_OMAP2_DSS_VENC=y
+CONFIG_OMAP2_VENC_OUT_TYPE_SVIDEO=y
+# CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE is not set
+# CONFIG_OMAP2_DSS_SDI is not set
+CONFIG_OMAP2_DSS_DSI=y
+CONFIG_OMAP2_DSS_USE_DSI_PLL=y
+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
+CONFIG_FB_OMAP2=y
+CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
+# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
+CONFIG_FB_OMAP2_NUM_FBS=3
+
+#
+# OMAP2/3 Display Device Drivers
+#
+CONFIG_PANEL_GENERIC=y
+# CONFIG_PANEL_LGPHILIPS_LB035Q02 is not set
+# CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C is not set
+CONFIG_PANEL_SHARP_LS037V7DW01=y
+# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set
+# CONFIG_PANEL_TAAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_RAWMIDI_SEQ=m
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=y
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_MCBSP=y
+CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_TWL4030=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+# CONFIG_HID_DRAGONRISE is not set
+CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
+CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+CONFIG_HID_TOPSEED=y
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_U132_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+CONFIG_MUSB_USE_SYSTEM_DMA_RX=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_TI_CPPI41_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP210X is not set
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+# CONFIG_USB_SERIAL_SYMBOL is not set
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_BERRY_CHARGE=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+# CONFIG_USB_APPLEDISPLAY is not set
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+CONFIG_USB_VST=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=480
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ZERO_HNPTEST=y
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_MASS_STORAGE is not set
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_MIDI_GADGET=m
+CONFIG_USB_G_PRINTER=m
+CONFIG_USB_CDC_COMPOSITE=m
+# CONFIG_USB_G_MULTI is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=y
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_USB_ULPI is not set
+CONFIG_TWL4030_USB=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+CONFIG_RTC_DRV_TWL4030=m
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+
+#
+# TI VLYNQ
+#
+CONFIG_STAGING=y
+# CONFIG_STAGING_EXCLUDE_BUILD is not set
+# CONFIG_USB_IP_COMMON is not set
+CONFIG_W35UND=m
+# CONFIG_PRISM2_USB is not set
+CONFIG_ECHO=m
+CONFIG_OTUS=m
+# CONFIG_COMEDI is not set
+# CONFIG_ASUS_OLED is not set
+CONFIG_RTL8192SU=m
+# CONFIG_INPUT_MIMIO is not set
+# CONFIG_TRANZPORT is not set
+
+#
+# Qualcomm MSM Camera And Video
+#
+
+#
+# Camera Sensor Selection
+#
+# CONFIG_INPUT_GPIO is not set
+# CONFIG_DST is not set
+# CONFIG_POHMELFS is not set
+# CONFIG_PLAN9AUTH is not set
+# CONFIG_LINE6_USB is not set
+# CONFIG_USB_SERIAL_QUATECH2 is not set
+# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
+# CONFIG_VT6656 is not set
+# CONFIG_FB_UDL is not set
+
+#
+# RAR Register Driver
+#
+# CONFIG_RAR_REGISTER is not set
+# CONFIG_IIO is not set
+# CONFIG_RAMZSWAP is not set
+# CONFIG_BATMAN_ADV is not set
+# CONFIG_STRIP is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_FS_JOURNAL_INFO=y
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+# CONFIG_EXT4_FS_POSIX_ACL is not set
+# CONFIG_EXT4_FS_SECURITY is not set
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+CONFIG_REISERFS_PROC_INFO=y
+CONFIG_REISERFS_FS_XATTR=y
+# CONFIG_REISERFS_FS_POSIX_ACL is not set
+# CONFIG_REISERFS_FS_SECURITY is not set
+CONFIG_JFS_FS=m
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=m
+# CONFIG_GFS2_FS_LOCKING_DLM is not set
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+CONFIG_OCFS2_FS_STATS=y
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+CONFIG_BTRFS_FS=m
+# CONFIG_BTRFS_FS_POSIX_ACL is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+# CONFIG_CUSE is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+# CONFIG_ECRYPT_FS is not set
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+# CONFIG_JFFS2_CMODE_PRIORITY is not set
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_JFFS2_CMODE_FAVOURLZO=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_ROMFS_FS=m
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_STATS2=y
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+CONFIG_CIFS_EXPERIMENTAL=y
+CONFIG_NCP_FS=m
+# CONFIG_NCPFS_PACKET_SIGNING is not set
+# CONFIG_NCPFS_IOCTL_LOCKING is not set
+# CONFIG_NCPFS_STRONG is not set
+# CONFIG_NCPFS_NFS_NS is not set
+# CONFIG_NCPFS_OS2_NS is not set
+# CONFIG_NCPFS_SMALLDOS is not set
+# CONFIG_NCPFS_NLS is not set
+# CONFIG_NCPFS_EXTRAS is not set
+CONFIG_CODA_FS=m
+CONFIG_AFS_FS=m
+# CONFIG_AFS_DEBUG is not set
+CONFIG_9P_FS=m
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+# CONFIG_UNIXWARE_DISKLABEL is not set
+CONFIG_LDM_PARTITION=y
+CONFIG_LDM_DEBUG=y
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
+CONFIG_ASYNC_PQ=m
+CONFIG_ASYNC_RAID6_RECOV=m
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_FIPS=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_GHASH=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_HW=y
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
+CONFIG_ELF_CORE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/beagleboard/logo_linux_clut224.ppm b/recipes-bsp/linux/linux-omap-psp-2.6.32/beagleboard/logo_linux_clut224.ppm
new file mode 100644
index 0000000..d29fc1c
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/beagleboard/logo_linux_clut224.ppm
@@ -0,0 +1,73147 @@
+P3
+# CREATOR: GIMP PNM Filter Version 1.1
+387 63
+255
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+116
+28
+246
+116
+28
+246
+116
+28
+246
+116
+28
+246
+116
+28
+246
+116
+28
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+111
+26
+246
+116
+28
+246
+116
+28
+247
+118
+39
+247
+118
+39
+247
+118
+39
+246
+116
+28
+247
+111
+26
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+111
+26
+246
+116
+28
+247
+118
+39
+247
+118
+39
+247
+118
+39
+246
+116
+28
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+111
+26
+246
+116
+28
+247
+118
+39
+247
+118
+39
+247
+118
+39
+246
+116
+28
+247
+111
+26
+247
+111
+26
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+111
+26
+246
+116
+28
+247
+118
+39
+247
+118
+39
+247
+118
+39
+246
+116
+28
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+118
+39
+247
+123
+41
+247
+123
+41
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+123
+41
+247
+123
+41
+247
+118
+39
+246
+116
+28
+247
+111
+26
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+246
+109
+10
+247
+111
+26
+246
+116
+28
+247
+118
+39
+247
+123
+41
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+123
+41
+247
+118
+39
+246
+116
+28
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+111
+26
+246
+116
+28
+247
+123
+41
+247
+123
+41
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+123
+41
+247
+118
+39
+247
+111
+26
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+118
+39
+247
+123
+41
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+123
+41
+247
+123
+41
+247
+118
+39
+247
+111
+26
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+111
+26
+246
+116
+28
+247
+123
+41
+247
+123
+41
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+123
+41
+247
+118
+39
+247
+111
+26
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+247
+111
+26
+246
+116
+28
+247
+118
+39
+247
+123
+41
+247
+130
+53
+248
+138
+64
+250
+139
+73
+247
+143
+74
+247
+143
+74
+249
+146
+83
+249
+146
+83
+249
+146
+83
+247
+143
+74
+250
+139
+73
+248
+138
+64
+247
+130
+53
+247
+123
+41
+247
+118
+39
+246
+116
+28
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+246
+109
+10
+247
+111
+26
+246
+116
+28
+247
+123
+41
+247
+130
+53
+248
+138
+64
+250
+139
+73
+247
+143
+74
+247
+143
+74
+250
+139
+73
+248
+138
+64
+247
+130
+53
+247
+123
+41
+246
+116
+28
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+118
+39
+247
+123
+41
+247
+130
+60
+248
+138
+64
+247
+143
+74
+247
+143
+74
+247
+143
+74
+250
+139
+73
+247
+130
+60
+247
+130
+53
+247
+123
+41
+246
+116
+28
+247
+111
+26
+246
+109
+10
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+118
+39
+247
+130
+53
+247
+130
+60
+250
+139
+73
+247
+143
+74
+247
+143
+74
+247
+143
+74
+248
+138
+64
+247
+130
+60
+247
+130
+53
+247
+118
+39
+247
+111
+26
+247
+111
+26
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+118
+39
+247
+123
+41
+247
+130
+60
+248
+138
+64
+247
+143
+74
+247
+143
+74
+247
+143
+74
+250
+139
+73
+247
+130
+60
+247
+130
+53
+247
+123
+41
+246
+116
+28
+247
+111
+26
+246
+109
+10
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+247
+111
+26
+246
+116
+28
+247
+118
+39
+247
+130
+53
+247
+130
+60
+250
+139
+73
+249
+146
+83
+249
+152
+92
+249
+159
+103
+249
+159
+103
+247
+165
+111
+251
+168
+115
+251
+168
+115
+247
+165
+111
+247
+165
+111
+249
+159
+103
+249
+152
+92
+249
+146
+83
+250
+139
+73
+247
+130
+60
+247
+123
+41
+247
+118
+39
+247
+111
+26
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+246
+116
+28
+247
+123
+41
+247
+130
+60
+247
+143
+74
+247
+150
+84
+246
+156
+93
+249
+159
+103
+249
+159
+103
+246
+156
+93
+247
+150
+84
+250
+139
+73
+247
+130
+60
+247
+123
+41
+246
+116
+28
+247
+111
+26
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+118
+39
+247
+123
+41
+248
+138
+64
+247
+143
+74
+249
+152
+92
+249
+159
+103
+249
+159
+103
+249
+159
+103
+246
+156
+93
+247
+150
+84
+250
+139
+73
+247
+130
+53
+247
+123
+41
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+118
+39
+247
+130
+53
+248
+138
+64
+249
+146
+83
+249
+152
+92
+249
+159
+103
+249
+159
+103
+249
+159
+103
+249
+152
+92
+249
+146
+83
+248
+138
+64
+247
+130
+53
+247
+118
+39
+247
+111
+26
+246
+109
+10
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+118
+39
+247
+130
+53
+248
+138
+64
+247
+143
+74
+249
+152
+92
+249
+159
+103
+249
+159
+103
+249
+159
+103
+246
+156
+93
+247
+150
+84
+250
+139
+73
+247
+130
+53
+247
+123
+41
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+118
+39
+247
+123
+41
+247
+130
+60
+250
+139
+73
+247
+150
+84
+249
+159
+103
+247
+165
+111
+249
+174
+124
+248
+180
+134
+252
+185
+144
+240
+181
+138
+219
+170
+138
+219
+170
+138
+230
+173
+136
+240
+181
+138
+248
+180
+134
+249
+174
+124
+247
+165
+111
+249
+159
+103
+249
+146
+83
+248
+138
+64
+247
+130
+53
+247
+123
+41
+247
+111
+26
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+123
+41
+247
+130
+60
+247
+143
+74
+249
+159
+103
+214
+151
+109
+121
+100
+85
+65
+67
+64
+74
+68
+68
+129
+102
+78
+214
+151
+109
+246
+156
+93
+247
+143
+74
+247
+130
+53
+247
+118
+39
+247
+111
+26
+246
+109
+10
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+111
+26
+246
+116
+28
+247
+123
+41
+248
+138
+64
+249
+146
+83
+249
+159
+103
+204
+141
+99
+102
+91
+75
+65
+67
+64
+81
+77
+76
+146
+111
+88
+238
+159
+107
+249
+152
+92
+250
+139
+73
+247
+130
+53
+247
+118
+39
+247
+111
+26
+246
+109
+10
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+118
+39
+247
+130
+53
+248
+138
+64
+247
+150
+84
+245
+162
+103
+162
+125
+96
+81
+77
+76
+55
+66
+67
+99
+90
+79
+187
+140
+108
+249
+159
+103
+247
+150
+84
+248
+138
+64
+247
+123
+41
+246
+116
+28
+247
+111
+26
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+111
+26
+246
+116
+28
+247
+123
+41
+248
+138
+64
+249
+146
+83
+249
+159
+103
+187
+140
+108
+102
+91
+75
+58
+69
+70
+76
+78
+76
+146
+111
+88
+238
+159
+107
+249
+152
+92
+250
+139
+73
+247
+130
+53
+247
+118
+39
+247
+111
+26
+246
+109
+10
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+246
+109
+10
+247
+111
+26
+246
+116
+28
+247
+123
+41
+247
+130
+53
+248
+138
+64
+249
+146
+83
+249
+159
+103
+251
+168
+115
+248
+180
+134
+239
+182
+144
+186
+157
+134
+124
+111
+99
+82
+69
+65
+65
+58
+56
+55
+48
+48
+65
+58
+56
+65
+58
+56
+65
+58
+56
+99
+90
+79
+158
+130
+108
+230
+173
+136
+250
+176
+132
+247
+165
+111
+249
+152
+92
+247
+143
+74
+247
+130
+53
+247
+123
+41
+246
+116
+28
+247
+111
+26
+246
+109
+10
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+111
+26
+247
+118
+39
+247
+130
+53
+250
+139
+73
+246
+156
+93
+214
+151
+109
+74
+68
+68
+56
+64
+60
+95
+87
+59
+88
+82
+59
+56
+64
+60
+81
+77
+76
+238
+159
+107
+249
+152
+92
+248
+138
+64
+247
+130
+53
+246
+116
+28
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+118
+39
+247
+130
+53
+247
+143
+74
+249
+159
+103
+187
+140
+108
+51
+62
+63
+69
+69
+61
+95
+87
+59
+83
+78
+61
+48
+58
+59
+121
+100
+85
+247
+165
+111
+247
+150
+84
+248
+138
+64
+247
+123
+41
+246
+116
+28
+246
+109
+10
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+123
+41
+247
+130
+60
+247
+150
+84
+247
+165
+111
+139
+115
+96
+48
+58
+59
+95
+78
+64
+118
+86
+65
+81
+73
+62
+48
+58
+59
+162
+125
+96
+249
+159
+103
+249
+146
+83
+247
+130
+60
+247
+123
+41
+247
+111
+26
+246
+109
+10
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+118
+39
+247
+130
+53
+247
+143
+74
+249
+159
+103
+187
+140
+108
+48
+58
+59
+76
+70
+64
+118
+86
+65
+95
+78
+64
+51
+62
+63
+121
+100
+85
+247
+165
+111
+247
+150
+84
+248
+138
+64
+247
+123
+41
+247
+111
+26
+246
+109
+10
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+246
+109
+10
+247
+111
+26
+246
+116
+28
+247
+123
+41
+247
+130
+60
+247
+143
+74
+249
+152
+92
+247
+165
+111
+250
+176
+132
+251
+192
+154
+167
+142
+123
+65
+58
+56
+35
+31
+30
+71
+60
+43
+108
+87
+46
+129
+106
+52
+137
+110
+49
+156
+125
+62
+187
+166
+150
+129
+106
+52
+101
+83
+47
+59
+50
+39
+55
+48
+48
+139
+115
+96
+240
+181
+138
+249
+174
+124
+249
+159
+103
+247
+143
+74
+247
+130
+53
+247
+123
+41
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+123
+41
+247
+130
+60
+247
+150
+84
+247
+165
+111
+124
+111
+99
+56
+64
+60
+137
+110
+49
+171
+129
+45
+171
+129
+45
+129
+106
+52
+51
+62
+63
+162
+125
+96
+247
+165
+111
+249
+146
+83
+247
+130
+60
+247
+118
+39
+247
+111
+26
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+123
+41
+248
+138
+64
+249
+152
+92
+245
+169
+119
+81
+77
+76
+69
+69
+61
+152
+119
+47
+171
+129
+45
+171
+129
+45
+105
+93
+60
+48
+58
+59
+187
+140
+108
+249
+159
+103
+247
+143
+74
+247
+130
+53
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+111
+26
+246
+116
+28
+247
+130
+53
+250
+139
+73
+249
+159
+103
+210
+156
+119
+51
+62
+63
+112
+85
+63
+234
+126
+45
+234
+126
+45
+225
+124
+48
+95
+78
+64
+63
+74
+74
+234
+168
+124
+246
+156
+93
+250
+139
+73
+247
+123
+41
+246
+116
+28
+246
+109
+10
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+123
+41
+248
+138
+64
+249
+152
+92
+245
+169
+119
+81
+77
+76
+81
+73
+62
+212
+120
+56
+234
+126
+45
+234
+126
+45
+135
+94
+64
+41
+58
+57
+187
+140
+108
+249
+159
+103
+247
+143
+74
+247
+130
+53
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+246
+116
+28
+247
+123
+41
+247
+130
+60
+249
+146
+83
+249
+159
+103
+249
+174
+124
+249
+189
+146
+236
+186
+153
+99
+90
+79
+47
+40
+38
+85
+71
+43
+145
+114
+49
+171
+129
+45
+171
+129
+45
+171
+129
+45
+168
+127
+42
+160
+120
+43
+195
+167
+113
+216
+194
+154
+168
+127
+42
+168
+127
+42
+123
+102
+54
+59
+50
+39
+82
+69
+65
+230
+173
+136
+249
+174
+124
+249
+159
+103
+247
+143
+74
+247
+130
+53
+247
+118
+39
+247
+111
+26
+246
+109
+10
+247
+103
+7
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+123
+41
+248
+138
+64
+246
+156
+93
+245
+169
+119
+84
+85
+82
+83
+78
+61
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+75
+74
+61
+101
+100
+92
+249
+174
+124
+246
+156
+93
+248
+138
+64
+247
+123
+41
+246
+116
+28
+247
+111
+26
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+111
+26
+247
+118
+39
+247
+130
+53
+247
+143
+74
+249
+159
+103
+210
+156
+119
+48
+58
+59
+105
+93
+60
+171
+129
+45
+158
+125
+46
+161
+127
+40
+152
+119
+47
+62
+63
+61
+139
+115
+96
+251
+168
+115
+247
+150
+84
+247
+130
+60
+247
+123
+41
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+111
+26
+247
+118
+39
+247
+130
+53
+249
+146
+83
+247
+165
+111
+158
+130
+108
+51
+62
+63
+188
+112
+56
+234
+125
+52
+224
+123
+55
+234
+126
+45
+163
+104
+61
+48
+58
+59
+210
+156
+119
+247
+165
+111
+249
+146
+83
+247
+130
+60
+247
+118
+39
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+118
+39
+247
+130
+53
+247
+143
+74
+247
+165
+111
+210
+156
+119
+55
+66
+67
+146
+97
+64
+234
+126
+45
+224
+123
+55
+234
+125
+52
+199
+115
+54
+62
+63
+61
+139
+115
+96
+251
+168
+115
+247
+150
+84
+247
+130
+60
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+111
+26
+246
+116
+28
+247
+123
+41
+247
+130
+60
+249
+146
+83
+249
+159
+103
+250
+176
+132
+219
+170
+138
+150
+125
+114
+65
+58
+56
+24
+22
+23
+59
+50
+39
+152
+119
+47
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+160
+120
+43
+158
+125
+46
+227
+196
+175
+192
+155
+91
+160
+120
+43
+171
+129
+45
+158
+125
+46
+85
+71
+43
+65
+58
+56
+219
+170
+138
+249
+174
+124
+246
+156
+93
+250
+139
+73
+247
+130
+53
+247
+118
+39
+247
+111
+26
+246
+109
+10
+247
+103
+7
+246
+97
+3
+247
+103
+7
+246
+109
+10
+246
+116
+28
+247
+130
+53
+247
+143
+74
+249
+159
+103
+230
+173
+136
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+91
+92
+89
+252
+185
+144
+247
+165
+111
+249
+146
+83
+247
+130
+60
+247
+123
+41
+246
+116
+28
+247
+111
+26
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+111
+26
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+111
+26
+246
+116
+28
+247
+123
+41
+248
+138
+64
+249
+152
+92
+249
+174
+124
+203
+161
+131
+43
+57
+62
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+63
+69
+60
+133
+120
+107
+250
+176
+132
+246
+156
+93
+248
+138
+64
+247
+123
+41
+246
+116
+28
+247
+111
+26
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+111
+26
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+123
+41
+248
+138
+64
+249
+152
+92
+249
+174
+124
+154
+133
+118
+56
+64
+60
+199
+115
+54
+227
+126
+50
+224
+123
+55
+234
+125
+52
+183
+110
+59
+51
+62
+63
+186
+157
+134
+250
+176
+132
+246
+156
+93
+250
+139
+73
+247
+130
+53
+247
+118
+39
+247
+111
+26
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+111
+26
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+118
+39
+247
+130
+53
+250
+139
+73
+246
+156
+93
+249
+174
+124
+209
+171
+139
+51
+62
+63
+155
+100
+63
+234
+125
+52
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+133
+120
+107
+249
+174
+124
+246
+156
+93
+248
+138
+64
+247
+123
+41
+247
+111
+26
+246
+109
+10
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+111
+26
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+118
+39
+247
+130
+53
+247
+143
+74
+249
+159
+103
+250
+176
+132
+158
+130
+108
+47
+40
+38
+59
+50
+39
+85
+71
+43
+85
+71
+43
+59
+50
+39
+35
+31
+30
+123
+102
+54
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+152
+119
+47
+192
+155
+91
+224
+207
+180
+158
+125
+46
+160
+120
+43
+168
+127
+42
+171
+129
+45
+71
+60
+43
+82
+69
+65
+239
+182
+144
+249
+174
+124
+249
+152
+92
+248
+138
+64
+247
+123
+41
+246
+116
+28
+247
+111
+26
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+111
+26
+247
+118
+39
+247
+130
+53
+249
+146
+83
+247
+165
+111
+239
+182
+144
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+91
+92
+89
+250
+197
+158
+250
+176
+132
+249
+159
+103
+247
+143
+74
+247
+130
+60
+247
+123
+41
+247
+118
+39
+246
+116
+28
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+116
+28
+247
+118
+39
+247
+118
+39
+247
+118
+39
+246
+116
+28
+246
+116
+28
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+111
+26
+246
+116
+28
+246
+116
+28
+246
+116
+28
+247
+118
+39
+247
+118
+39
+246
+116
+28
+246
+116
+28
+246
+116
+28
+246
+116
+28
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+116
+28
+246
+116
+28
+247
+118
+39
+247
+118
+39
+246
+116
+28
+246
+116
+28
+246
+116
+28
+246
+116
+28
+246
+116
+28
+247
+118
+39
+247
+123
+41
+247
+130
+60
+249
+146
+83
+249
+159
+103
+248
+180
+134
+212
+173
+150
+48
+58
+59
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+65
+67
+64
+137
+127
+115
+248
+180
+134
+249
+159
+103
+247
+143
+74
+247
+130
+53
+247
+118
+39
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+116
+28
+247
+118
+39
+247
+118
+39
+247
+118
+39
+246
+116
+28
+246
+116
+28
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+118
+39
+247
+130
+53
+250
+139
+73
+249
+159
+103
+250
+176
+132
+167
+142
+123
+56
+64
+60
+199
+115
+54
+227
+126
+50
+224
+123
+55
+234
+125
+52
+173
+106
+60
+48
+58
+59
+187
+166
+150
+249
+189
+146
+251
+168
+115
+249
+152
+92
+250
+139
+73
+247
+130
+53
+247
+123
+41
+246
+116
+28
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+116
+28
+246
+116
+28
+247
+118
+39
+247
+118
+39
+246
+116
+28
+246
+116
+28
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+116
+28
+246
+116
+28
+247
+118
+39
+247
+118
+39
+246
+116
+28
+246
+116
+28
+246
+116
+28
+246
+116
+28
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+116
+28
+247
+123
+41
+247
+130
+53
+248
+138
+64
+247
+150
+84
+247
+165
+111
+252
+185
+144
+212
+173
+150
+51
+62
+63
+155
+100
+63
+234
+125
+52
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+133
+120
+107
+248
+180
+134
+249
+159
+103
+250
+139
+73
+247
+123
+41
+247
+111
+26
+246
+109
+10
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+116
+28
+246
+116
+28
+247
+118
+39
+247
+118
+39
+247
+118
+39
+246
+116
+28
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+103
+7
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+116
+28
+246
+116
+28
+247
+118
+39
+247
+118
+39
+246
+116
+28
+246
+116
+28
+246
+116
+28
+246
+116
+28
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+111
+26
+247
+118
+39
+247
+130
+53
+250
+139
+73
+249
+159
+103
+250
+176
+132
+167
+142
+123
+24
+22
+23
+85
+71
+43
+158
+125
+46
+171
+129
+45
+171
+129
+45
+171
+129
+45
+85
+71
+43
+35
+31
+30
+145
+114
+49
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+152
+119
+47
+216
+194
+154
+195
+167
+113
+152
+119
+47
+158
+125
+46
+168
+127
+42
+158
+125
+46
+59
+50
+39
+139
+115
+96
+252
+185
+144
+247
+165
+111
+247
+150
+84
+247
+130
+60
+247
+123
+41
+247
+111
+26
+246
+109
+10
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+118
+39
+247
+130
+60
+247
+150
+84
+251
+168
+115
+236
+186
+153
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+91
+92
+89
+251
+209
+178
+249
+189
+146
+249
+174
+124
+249
+159
+103
+249
+146
+83
+248
+138
+64
+247
+130
+53
+247
+130
+53
+247
+123
+41
+247
+118
+39
+246
+116
+28
+247
+111
+26
+247
+111
+26
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+247
+111
+26
+246
+116
+28
+247
+118
+39
+247
+123
+41
+247
+123
+41
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+123
+41
+247
+123
+41
+246
+116
+28
+247
+111
+26
+247
+111
+26
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+111
+26
+246
+116
+28
+247
+118
+39
+247
+123
+41
+247
+123
+41
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+118
+39
+246
+116
+28
+246
+116
+28
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+116
+28
+247
+118
+39
+247
+123
+41
+247
+123
+41
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+248
+138
+64
+247
+143
+74
+246
+156
+93
+249
+174
+124
+251
+192
+154
+207
+178
+158
+48
+58
+59
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+63
+69
+60
+137
+127
+115
+249
+189
+146
+247
+165
+111
+247
+150
+84
+248
+138
+64
+247
+130
+53
+247
+123
+41
+247
+118
+39
+247
+123
+41
+247
+123
+41
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+123
+41
+247
+118
+39
+247
+118
+39
+247
+118
+39
+247
+123
+41
+247
+130
+60
+247
+143
+74
+249
+159
+103
+252
+185
+144
+167
+142
+123
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+234
+125
+52
+173
+106
+60
+51
+62
+63
+187
+166
+150
+250
+200
+166
+248
+180
+134
+247
+165
+111
+249
+152
+92
+247
+143
+74
+247
+130
+60
+247
+130
+53
+247
+123
+41
+247
+123
+41
+247
+118
+39
+247
+111
+26
+247
+111
+26
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+118
+39
+247
+123
+41
+247
+123
+41
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+123
+41
+247
+123
+41
+247
+118
+39
+247
+111
+26
+247
+111
+26
+246
+109
+10
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+118
+39
+247
+123
+41
+247
+123
+41
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+130
+53
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+118
+39
+247
+118
+39
+247
+118
+39
+247
+118
+39
+247
+118
+39
+247
+118
+39
+247
+118
+39
+247
+123
+41
+247
+123
+41
+247
+130
+53
+247
+130
+60
+250
+139
+73
+249
+152
+92
+247
+165
+111
+248
+180
+134
+250
+197
+158
+207
+178
+158
+51
+62
+63
+155
+100
+63
+234
+125
+52
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+252
+185
+144
+249
+159
+103
+247
+143
+74
+247
+130
+53
+246
+116
+28
+246
+109
+10
+247
+103
+7
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+118
+39
+247
+123
+41
+247
+123
+41
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+123
+41
+247
+123
+41
+247
+118
+39
+246
+116
+28
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+116
+28
+247
+118
+39
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+130
+53
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+118
+39
+247
+118
+39
+246
+116
+28
+246
+116
+28
+246
+116
+28
+247
+118
+39
+247
+118
+39
+247
+123
+41
+247
+123
+41
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+118
+39
+246
+116
+28
+247
+111
+26
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+123
+41
+248
+138
+64
+247
+150
+84
+251
+168
+115
+230
+173
+136
+47
+40
+38
+59
+50
+39
+168
+127
+42
+168
+127
+42
+158
+125
+46
+158
+125
+46
+161
+127
+40
+171
+129
+45
+59
+50
+39
+71
+60
+43
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+152
+119
+47
+170
+137
+67
+239
+227
+208
+170
+137
+67
+160
+120
+43
+158
+125
+46
+171
+129
+45
+123
+102
+54
+47
+40
+38
+209
+171
+139
+248
+180
+134
+247
+165
+111
+249
+146
+83
+247
+130
+60
+247
+123
+41
+247
+111
+26
+247
+111
+26
+246
+109
+10
+247
+111
+26
+247
+123
+41
+247
+130
+60
+247
+150
+84
+249
+174
+124
+236
+186
+153
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+91
+92
+89
+255
+215
+190
+253
+204
+176
+249
+189
+146
+249
+174
+124
+247
+165
+111
+246
+156
+93
+249
+146
+83
+247
+143
+74
+248
+138
+64
+247
+130
+60
+247
+130
+53
+247
+123
+41
+246
+116
+28
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+116
+28
+247
+118
+39
+247
+123
+41
+247
+130
+53
+248
+138
+64
+250
+139
+73
+247
+143
+74
+249
+146
+83
+247
+150
+84
+249
+146
+83
+249
+146
+83
+247
+143
+74
+248
+138
+64
+247
+130
+60
+247
+130
+53
+247
+123
+41
+247
+118
+39
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+109
+10
+247
+111
+26
+247
+111
+26
+246
+116
+28
+247
+118
+39
+247
+123
+41
+247
+130
+53
+248
+138
+64
+250
+139
+73
+247
+143
+74
+249
+146
+83
+249
+146
+83
+249
+146
+83
+249
+146
+83
+249
+146
+83
+247
+143
+74
+247
+143
+74
+250
+139
+73
+250
+139
+73
+248
+138
+64
+247
+130
+60
+247
+130
+53
+247
+130
+53
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+130
+53
+247
+130
+60
+250
+139
+73
+247
+143
+74
+249
+146
+83
+249
+146
+83
+249
+146
+83
+249
+146
+83
+249
+146
+83
+247
+143
+74
+247
+143
+74
+247
+143
+74
+247
+143
+74
+247
+150
+84
+249
+159
+103
+249
+174
+124
+252
+185
+144
+250
+200
+166
+217
+187
+166
+48
+58
+59
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+63
+69
+60
+137
+127
+115
+251
+192
+154
+249
+174
+124
+246
+156
+93
+247
+143
+74
+248
+138
+64
+247
+130
+60
+247
+130
+60
+248
+138
+64
+250
+139
+73
+247
+143
+74
+249
+146
+83
+247
+150
+84
+249
+146
+83
+249
+146
+83
+247
+143
+74
+248
+138
+64
+247
+130
+60
+247
+130
+53
+247
+130
+53
+247
+130
+60
+250
+139
+73
+247
+150
+84
+251
+168
+115
+249
+189
+146
+161
+144
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+234
+125
+52
+173
+106
+60
+48
+58
+59
+187
+166
+150
+253
+212
+188
+250
+197
+158
+248
+180
+134
+251
+168
+115
+249
+159
+103
+247
+150
+84
+247
+143
+74
+250
+139
+73
+248
+138
+64
+247
+130
+53
+247
+123
+41
+247
+118
+39
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+111
+26
+247
+118
+39
+247
+123
+41
+247
+130
+53
+248
+138
+64
+250
+139
+73
+247
+143
+74
+249
+146
+83
+247
+150
+84
+247
+150
+84
+249
+146
+83
+247
+143
+74
+250
+139
+73
+247
+130
+60
+247
+130
+53
+247
+123
+41
+247
+118
+39
+247
+111
+26
+247
+111
+26
+246
+109
+10
+246
+109
+10
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+118
+39
+247
+123
+41
+247
+130
+53
+247
+130
+60
+248
+138
+64
+247
+143
+74
+249
+146
+83
+249
+146
+83
+249
+146
+83
+249
+146
+83
+249
+146
+83
+247
+143
+74
+247
+143
+74
+247
+143
+74
+250
+139
+73
+250
+139
+73
+250
+139
+73
+248
+138
+64
+248
+138
+64
+248
+138
+64
+248
+138
+64
+248
+138
+64
+248
+138
+64
+250
+139
+73
+250
+139
+73
+250
+139
+73
+250
+139
+73
+247
+143
+74
+247
+143
+74
+250
+139
+73
+250
+139
+73
+248
+138
+64
+248
+138
+64
+247
+130
+60
+247
+130
+60
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+60
+247
+130
+60
+248
+138
+64
+250
+139
+73
+247
+143
+74
+247
+150
+84
+249
+159
+103
+251
+168
+115
+248
+180
+134
+250
+197
+158
+253
+212
+188
+207
+178
+158
+51
+62
+63
+155
+100
+63
+234
+125
+52
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+249
+189
+146
+247
+165
+111
+247
+143
+74
+247
+130
+53
+246
+116
+28
+246
+109
+10
+247
+103
+7
+247
+103
+7
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+111
+26
+247
+118
+39
+247
+123
+41
+247
+130
+53
+247
+130
+60
+250
+139
+73
+247
+143
+74
+249
+146
+83
+247
+150
+84
+247
+150
+84
+249
+146
+83
+247
+143
+74
+250
+139
+73
+248
+138
+64
+247
+130
+53
+247
+123
+41
+247
+123
+41
+247
+118
+39
+247
+118
+39
+247
+118
+39
+247
+123
+41
+247
+123
+41
+247
+130
+53
+247
+130
+53
+248
+138
+64
+248
+138
+64
+250
+139
+73
+250
+139
+73
+247
+143
+74
+247
+143
+74
+250
+139
+73
+250
+139
+73
+248
+138
+64
+247
+130
+60
+247
+130
+60
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+60
+248
+138
+64
+250
+139
+73
+247
+143
+74
+249
+146
+83
+249
+146
+83
+249
+146
+83
+249
+146
+83
+249
+146
+83
+247
+143
+74
+247
+143
+74
+250
+139
+73
+250
+139
+73
+248
+138
+64
+247
+130
+60
+247
+130
+53
+247
+123
+41
+247
+123
+41
+246
+116
+28
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+111
+26
+247
+118
+39
+247
+130
+53
+247
+143
+74
+249
+159
+103
+252
+185
+144
+139
+115
+96
+35
+31
+30
+129
+106
+52
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+117
+98
+55
+35
+31
+30
+152
+119
+47
+168
+127
+42
+168
+127
+42
+160
+120
+43
+168
+127
+42
+171
+129
+45
+152
+119
+47
+216
+194
+154
+224
+207
+180
+160
+120
+43
+160
+120
+43
+137
+110
+49
+102
+91
+75
+35
+31
+30
+115
+102
+92
+250
+200
+166
+250
+176
+132
+249
+159
+103
+249
+146
+83
+247
+130
+60
+247
+123
+41
+246
+116
+28
+247
+111
+26
+246
+116
+28
+247
+123
+41
+248
+138
+64
+249
+152
+92
+249
+174
+124
+236
+186
+153
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+91
+92
+89
+255
+215
+190
+255
+215
+190
+253
+204
+176
+250
+197
+158
+252
+185
+144
+249
+174
+124
+251
+168
+115
+249
+159
+103
+246
+156
+93
+247
+150
+84
+250
+139
+73
+247
+130
+60
+247
+130
+53
+247
+123
+41
+247
+118
+39
+246
+116
+28
+246
+116
+28
+247
+118
+39
+247
+123
+41
+247
+130
+53
+248
+138
+64
+249
+146
+83
+249
+152
+92
+249
+159
+103
+247
+165
+111
+251
+168
+115
+251
+168
+115
+251
+168
+115
+251
+168
+115
+247
+165
+111
+249
+159
+103
+247
+150
+84
+247
+143
+74
+248
+138
+64
+247
+130
+53
+247
+123
+41
+247
+118
+39
+246
+116
+28
+246
+116
+28
+246
+116
+28
+247
+118
+39
+247
+123
+41
+247
+130
+60
+250
+139
+73
+249
+146
+83
+249
+152
+92
+249
+159
+103
+247
+165
+111
+251
+168
+115
+251
+168
+115
+251
+168
+115
+251
+168
+115
+247
+165
+111
+247
+165
+111
+247
+165
+111
+249
+159
+103
+249
+159
+103
+246
+156
+93
+247
+150
+84
+249
+146
+83
+247
+143
+74
+248
+138
+64
+247
+130
+60
+247
+130
+60
+247
+130
+60
+248
+138
+64
+250
+139
+73
+249
+146
+83
+249
+152
+92
+249
+159
+103
+249
+159
+103
+247
+165
+111
+251
+168
+115
+251
+168
+115
+251
+168
+115
+251
+168
+115
+247
+165
+111
+247
+165
+111
+249
+159
+103
+247
+165
+111
+251
+168
+115
+250
+176
+132
+252
+185
+144
+250
+200
+166
+255
+215
+190
+217
+187
+166
+48
+58
+59
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+65
+67
+64
+137
+127
+115
+250
+200
+166
+250
+176
+132
+247
+165
+111
+249
+152
+92
+247
+150
+84
+249
+146
+83
+247
+150
+84
+249
+152
+92
+249
+159
+103
+247
+165
+111
+251
+168
+115
+251
+168
+115
+251
+168
+115
+247
+165
+111
+249
+159
+103
+246
+156
+93
+247
+150
+84
+247
+143
+74
+250
+139
+73
+247
+143
+74
+249
+146
+83
+249
+159
+103
+249
+174
+124
+251
+192
+154
+161
+144
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+227
+126
+50
+173
+106
+60
+51
+62
+63
+187
+166
+150
+255
+215
+190
+253
+212
+188
+250
+200
+166
+249
+189
+146
+248
+180
+134
+249
+174
+124
+247
+165
+111
+249
+159
+103
+249
+152
+92
+247
+143
+74
+248
+138
+64
+247
+130
+53
+247
+123
+41
+247
+118
+39
+246
+116
+28
+247
+111
+26
+246
+116
+28
+247
+118
+39
+247
+123
+41
+247
+130
+53
+248
+138
+64
+247
+143
+74
+249
+152
+92
+249
+159
+103
+247
+165
+111
+251
+168
+115
+251
+168
+115
+251
+168
+115
+251
+168
+115
+247
+165
+111
+249
+159
+103
+249
+152
+92
+247
+143
+74
+248
+138
+64
+247
+130
+53
+247
+123
+41
+247
+118
+39
+247
+111
+26
+247
+111
+26
+247
+111
+26
+246
+116
+28
+247
+123
+41
+247
+130
+53
+248
+138
+64
+247
+143
+74
+247
+150
+84
+249
+159
+103
+249
+159
+103
+247
+165
+111
+251
+168
+115
+251
+168
+115
+251
+168
+115
+251
+168
+115
+247
+165
+111
+247
+165
+111
+249
+159
+103
+249
+159
+103
+249
+159
+103
+249
+159
+103
+249
+159
+103
+249
+159
+103
+246
+156
+93
+246
+156
+93
+246
+156
+93
+249
+159
+103
+249
+159
+103
+249
+159
+103
+249
+159
+103
+249
+159
+103
+249
+159
+103
+249
+159
+103
+249
+159
+103
+249
+159
+103
+249
+159
+103
+249
+152
+92
+249
+152
+92
+247
+150
+84
+249
+146
+83
+249
+146
+83
+249
+146
+83
+247
+150
+84
+249
+152
+92
+246
+156
+93
+249
+159
+103
+247
+165
+111
+249
+174
+124
+250
+176
+132
+249
+189
+146
+250
+200
+166
+253
+212
+188
+255
+215
+190
+207
+178
+158
+51
+62
+63
+155
+100
+63
+234
+125
+52
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+249
+189
+146
+247
+165
+111
+247
+143
+74
+247
+130
+53
+246
+116
+28
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+109
+10
+247
+111
+26
+246
+116
+28
+247
+123
+41
+247
+130
+53
+248
+138
+64
+247
+143
+74
+247
+150
+84
+249
+159
+103
+247
+165
+111
+251
+168
+115
+251
+168
+115
+251
+168
+115
+251
+168
+115
+247
+165
+111
+249
+159
+103
+249
+152
+92
+249
+146
+83
+250
+139
+73
+247
+130
+60
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+60
+248
+138
+64
+247
+143
+74
+249
+146
+83
+249
+152
+92
+246
+156
+93
+249
+159
+103
+249
+159
+103
+249
+159
+103
+249
+159
+103
+249
+159
+103
+249
+159
+103
+246
+156
+93
+249
+152
+92
+247
+150
+84
+249
+146
+83
+247
+143
+74
+247
+143
+74
+247
+143
+74
+249
+146
+83
+247
+150
+84
+246
+156
+93
+249
+159
+103
+247
+165
+111
+247
+165
+111
+251
+168
+115
+251
+168
+115
+251
+168
+115
+247
+165
+111
+247
+165
+111
+247
+165
+111
+249
+159
+103
+249
+159
+103
+246
+156
+93
+247
+150
+84
+247
+143
+74
+248
+138
+64
+247
+130
+53
+247
+123
+41
+247
+118
+39
+247
+111
+26
+246
+109
+10
+247
+103
+7
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+123
+41
+248
+138
+64
+249
+152
+92
+249
+174
+124
+236
+186
+153
+47
+40
+38
+59
+50
+39
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+47
+40
+38
+108
+87
+46
+168
+127
+42
+111
+94
+57
+76
+70
+64
+59
+50
+39
+101
+83
+47
+160
+120
+43
+170
+137
+67
+253
+255
+252
+195
+167
+113
+145
+114
+49
+69
+69
+61
+120
+114
+108
+35
+31
+30
+47
+40
+38
+217
+187
+166
+250
+197
+158
+250
+176
+132
+249
+159
+103
+249
+146
+83
+248
+138
+64
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+130
+53
+250
+139
+73
+246
+156
+93
+250
+176
+132
+232
+190
+161
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+91
+92
+89
+255
+215
+190
+255
+215
+190
+245
+212
+186
+227
+196
+175
+212
+173
+150
+209
+171
+139
+219
+170
+138
+240
+181
+138
+250
+176
+132
+251
+168
+115
+249
+159
+103
+247
+150
+84
+250
+139
+73
+247
+130
+60
+247
+130
+53
+247
+130
+53
+247
+130
+53
+247
+130
+53
+248
+138
+64
+249
+146
+83
+246
+156
+93
+247
+165
+111
+249
+174
+124
+248
+180
+134
+240
+181
+138
+219
+170
+138
+203
+161
+131
+203
+161
+131
+219
+170
+138
+240
+181
+138
+250
+176
+132
+249
+174
+124
+249
+159
+103
+249
+152
+92
+247
+143
+74
+247
+130
+60
+247
+130
+53
+247
+123
+41
+247
+123
+41
+247
+130
+53
+247
+130
+53
+248
+138
+64
+249
+146
+83
+246
+156
+93
+247
+165
+111
+249
+174
+124
+245
+179
+138
+230
+173
+136
+203
+161
+131
+203
+161
+131
+219
+170
+138
+239
+182
+144
+251
+192
+154
+249
+189
+146
+252
+185
+144
+252
+185
+144
+248
+180
+134
+245
+169
+119
+234
+168
+124
+247
+165
+111
+249
+159
+103
+249
+152
+92
+247
+150
+84
+247
+150
+84
+247
+150
+84
+249
+152
+92
+249
+159
+103
+247
+165
+111
+249
+174
+124
+248
+180
+134
+230
+173
+136
+219
+170
+138
+203
+161
+131
+209
+171
+139
+239
+182
+144
+251
+192
+154
+249
+189
+146
+249
+189
+146
+252
+185
+144
+252
+185
+144
+249
+189
+146
+236
+186
+153
+250
+200
+166
+255
+215
+190
+255
+215
+190
+217
+187
+166
+48
+58
+59
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+65
+67
+64
+137
+127
+115
+253
+204
+176
+252
+185
+144
+249
+174
+124
+247
+165
+111
+247
+165
+111
+247
+165
+111
+251
+168
+115
+249
+174
+124
+248
+180
+134
+230
+173
+136
+219
+170
+138
+203
+161
+131
+209
+171
+139
+230
+173
+136
+245
+179
+138
+250
+176
+132
+251
+168
+115
+249
+159
+103
+249
+159
+103
+246
+156
+93
+249
+159
+103
+251
+168
+115
+248
+180
+134
+250
+197
+158
+161
+144
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+227
+126
+50
+173
+106
+60
+51
+62
+63
+187
+166
+150
+255
+215
+190
+255
+215
+190
+234
+204
+183
+207
+178
+158
+209
+171
+139
+209
+171
+139
+230
+173
+136
+248
+180
+134
+249
+174
+124
+247
+165
+111
+249
+152
+92
+247
+143
+74
+248
+138
+64
+247
+130
+53
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+130
+53
+248
+138
+64
+247
+143
+74
+249
+152
+92
+247
+165
+111
+249
+174
+124
+248
+180
+134
+240
+181
+138
+219
+170
+138
+203
+161
+131
+203
+161
+131
+219
+170
+138
+240
+181
+138
+248
+180
+134
+249
+174
+124
+247
+165
+111
+249
+152
+92
+247
+143
+74
+248
+138
+64
+247
+130
+53
+247
+123
+41
+247
+123
+41
+247
+123
+41
+247
+130
+53
+247
+130
+60
+247
+143
+74
+249
+152
+92
+249
+159
+103
+249
+174
+124
+250
+176
+132
+240
+181
+138
+219
+170
+138
+203
+161
+131
+203
+161
+131
+230
+173
+136
+251
+192
+154
+249
+189
+146
+249
+189
+146
+252
+185
+144
+252
+185
+144
+248
+180
+134
+234
+168
+124
+250
+176
+132
+248
+180
+134
+250
+176
+132
+250
+176
+132
+250
+176
+132
+248
+180
+134
+248
+180
+134
+230
+173
+136
+240
+181
+138
+252
+185
+144
+252
+185
+144
+252
+185
+144
+252
+185
+144
+248
+180
+134
+234
+168
+124
+234
+168
+124
+249
+174
+124
+251
+168
+115
+247
+165
+111
+247
+165
+111
+247
+165
+111
+251
+168
+115
+249
+174
+124
+250
+176
+132
+248
+180
+134
+230
+173
+136
+219
+170
+138
+209
+171
+139
+207
+178
+158
+227
+196
+175
+253
+212
+188
+255
+215
+190
+217
+187
+166
+51
+62
+63
+155
+100
+63
+234
+125
+52
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+249
+189
+146
+247
+165
+111
+247
+143
+74
+247
+130
+53
+246
+116
+28
+247
+111
+26
+246
+109
+10
+246
+109
+10
+247
+111
+26
+246
+116
+28
+247
+123
+41
+247
+130
+60
+247
+143
+74
+249
+152
+92
+249
+159
+103
+249
+174
+124
+248
+180
+134
+240
+181
+138
+219
+170
+138
+203
+161
+131
+203
+161
+131
+219
+170
+138
+240
+181
+138
+248
+180
+134
+249
+174
+124
+247
+165
+111
+249
+159
+103
+247
+150
+84
+249
+146
+83
+247
+143
+74
+247
+143
+74
+249
+146
+83
+249
+152
+92
+249
+159
+103
+247
+165
+111
+234
+168
+124
+234
+168
+124
+248
+180
+134
+252
+185
+144
+252
+185
+144
+252
+185
+144
+248
+180
+134
+250
+176
+132
+234
+168
+124
+249
+174
+124
+251
+168
+115
+247
+165
+111
+247
+165
+111
+249
+159
+103
+247
+165
+111
+251
+168
+115
+249
+174
+124
+250
+176
+132
+248
+180
+134
+230
+173
+136
+203
+161
+131
+203
+161
+131
+219
+170
+138
+239
+182
+144
+251
+192
+154
+249
+189
+146
+252
+185
+144
+252
+185
+144
+248
+180
+134
+234
+168
+124
+238
+159
+107
+247
+165
+111
+249
+152
+92
+247
+143
+74
+247
+130
+60
+247
+123
+41
+246
+116
+28
+247
+111
+26
+246
+109
+10
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+111
+26
+246
+116
+28
+247
+130
+53
+247
+143
+74
+247
+165
+111
+252
+185
+144
+154
+133
+118
+24
+22
+23
+108
+87
+46
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+71
+60
+43
+85
+71
+43
+101
+83
+47
+89
+84
+82
+152
+147
+147
+24
+22
+23
+24
+22
+23
+108
+87
+46
+168
+127
+42
+224
+207
+180
+253
+255
+252
+209
+171
+139
+101
+83
+47
+24
+22
+23
+35
+31
+30
+35
+31
+30
+167
+142
+123
+253
+212
+188
+250
+197
+158
+248
+180
+134
+247
+165
+111
+247
+150
+84
+250
+139
+73
+247
+130
+60
+247
+130
+60
+248
+138
+64
+249
+146
+83
+249
+159
+103
+250
+176
+132
+232
+190
+161
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+97
+98
+96
+217
+187
+166
+137
+127
+115
+91
+92
+89
+55
+66
+67
+48
+58
+59
+48
+58
+59
+55
+66
+67
+84
+85
+82
+133
+120
+107
+209
+171
+139
+248
+180
+134
+251
+168
+115
+249
+159
+103
+247
+150
+84
+247
+143
+74
+250
+139
+73
+250
+139
+73
+249
+146
+83
+249
+152
+92
+247
+165
+111
+249
+174
+124
+245
+179
+138
+178
+146
+122
+124
+111
+99
+76
+78
+76
+51
+62
+63
+48
+58
+59
+48
+58
+59
+58
+69
+70
+91
+92
+89
+144
+125
+110
+203
+161
+131
+248
+180
+134
+249
+174
+124
+249
+159
+103
+247
+150
+84
+247
+143
+74
+248
+138
+64
+248
+138
+64
+250
+139
+73
+249
+146
+83
+246
+156
+93
+247
+165
+111
+250
+176
+132
+230
+173
+136
+154
+133
+118
+101
+100
+92
+58
+69
+70
+48
+58
+59
+48
+58
+59
+51
+62
+63
+84
+85
+82
+137
+127
+115
+217
+187
+166
+253
+212
+188
+227
+196
+175
+144
+125
+110
+89
+84
+82
+81
+77
+76
+115
+102
+92
+210
+156
+119
+249
+174
+124
+251
+168
+115
+251
+168
+115
+251
+168
+115
+249
+174
+124
+250
+176
+132
+252
+185
+144
+195
+157
+134
+124
+111
+99
+76
+78
+76
+51
+62
+63
+48
+58
+59
+48
+58
+59
+70
+79
+77
+120
+114
+108
+187
+166
+150
+253
+212
+188
+253
+212
+188
+172
+150
+134
+101
+100
+92
+77
+85
+81
+101
+100
+92
+176
+156
+141
+255
+215
+190
+217
+187
+166
+48
+58
+59
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+63
+69
+60
+137
+127
+115
+253
+212
+188
+250
+197
+158
+252
+185
+144
+248
+180
+134
+248
+180
+134
+252
+185
+144
+239
+182
+144
+167
+142
+123
+109
+106
+99
+70
+79
+77
+48
+58
+59
+48
+58
+59
+48
+58
+59
+58
+69
+70
+91
+92
+89
+150
+125
+114
+219
+170
+138
+248
+180
+134
+249
+174
+124
+249
+174
+124
+249
+174
+124
+250
+176
+132
+249
+189
+146
+253
+204
+176
+161
+144
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+234
+125
+52
+183
+110
+59
+51
+62
+63
+176
+156
+141
+187
+166
+150
+109
+106
+99
+63
+74
+74
+43
+57
+62
+43
+57
+62
+43
+57
+62
+63
+74
+74
+109
+106
+99
+178
+146
+122
+245
+179
+138
+249
+174
+124
+249
+159
+103
+247
+150
+84
+247
+143
+74
+248
+138
+64
+248
+138
+64
+248
+138
+64
+247
+143
+74
+247
+150
+84
+249
+159
+103
+249
+174
+124
+252
+185
+144
+195
+157
+134
+124
+111
+99
+77
+85
+81
+51
+62
+63
+41
+58
+57
+43
+57
+62
+51
+62
+63
+77
+85
+81
+124
+111
+99
+195
+157
+134
+252
+185
+144
+249
+174
+124
+249
+159
+103
+247
+150
+84
+247
+143
+74
+248
+138
+64
+247
+130
+60
+248
+138
+64
+250
+139
+73
+247
+150
+84
+249
+159
+103
+251
+168
+115
+248
+180
+134
+203
+161
+131
+124
+111
+99
+77
+85
+81
+48
+58
+59
+43
+57
+62
+43
+57
+62
+63
+74
+74
+109
+106
+99
+187
+166
+150
+253
+212
+188
+253
+212
+188
+187
+166
+150
+109
+106
+99
+77
+85
+81
+84
+85
+82
+150
+125
+114
+232
+190
+161
+253
+204
+176
+253
+204
+176
+172
+150
+134
+101
+100
+92
+77
+85
+81
+91
+92
+89
+137
+127
+115
+227
+196
+175
+253
+212
+188
+186
+157
+134
+109
+106
+99
+77
+85
+81
+84
+85
+82
+124
+111
+99
+219
+170
+138
+249
+189
+146
+249
+189
+146
+249
+189
+146
+251
+192
+154
+250
+197
+158
+186
+157
+134
+109
+106
+99
+70
+79
+77
+43
+57
+62
+43
+57
+62
+41
+58
+57
+63
+74
+74
+101
+100
+92
+176
+156
+141
+194
+173
+157
+55
+66
+67
+155
+100
+63
+234
+125
+52
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+249
+189
+146
+247
+165
+111
+247
+143
+74
+247
+130
+53
+247
+118
+39
+247
+111
+26
+246
+109
+10
+247
+111
+26
+246
+116
+28
+247
+123
+41
+247
+130
+60
+249
+146
+83
+249
+159
+103
+249
+174
+124
+252
+185
+144
+203
+161
+131
+133
+120
+107
+84
+85
+82
+55
+66
+67
+43
+57
+62
+41
+58
+57
+51
+62
+63
+77
+85
+81
+124
+111
+99
+178
+146
+122
+239
+182
+144
+250
+176
+132
+249
+174
+124
+247
+165
+111
+249
+159
+103
+249
+159
+103
+247
+165
+111
+249
+174
+124
+210
+156
+119
+124
+111
+99
+77
+85
+81
+77
+85
+81
+109
+106
+99
+194
+173
+157
+253
+212
+188
+217
+187
+166
+133
+120
+107
+89
+84
+82
+76
+78
+76
+101
+100
+92
+178
+146
+122
+249
+189
+146
+252
+185
+144
+252
+185
+144
+252
+185
+144
+251
+192
+154
+236
+186
+153
+167
+142
+123
+101
+100
+92
+63
+74
+74
+41
+58
+57
+43
+57
+62
+51
+62
+63
+77
+85
+81
+137
+127
+115
+217
+187
+166
+253
+212
+188
+227
+196
+175
+144
+125
+110
+84
+85
+82
+76
+78
+76
+115
+102
+92
+204
+141
+99
+249
+159
+103
+247
+143
+74
+247
+130
+60
+247
+123
+41
+247
+111
+26
+246
+109
+10
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+123
+41
+248
+138
+64
+249
+152
+92
+249
+174
+124
+250
+197
+158
+82
+69
+65
+47
+40
+38
+152
+119
+47
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+101
+83
+47
+59
+50
+39
+101
+83
+47
+24
+22
+23
+35
+31
+30
+24
+22
+23
+24
+22
+23
+108
+87
+46
+168
+127
+42
+195
+167
+113
+253
+255
+252
+253
+255
+252
+239
+227
+208
+186
+157
+134
+162
+125
+96
+105
+93
+60
+47
+40
+38
+150
+125
+114
+217
+187
+166
+250
+200
+166
+252
+185
+144
+251
+168
+115
+246
+156
+93
+249
+146
+83
+247
+143
+74
+249
+146
+83
+249
+152
+92
+247
+165
+111
+252
+185
+144
+232
+190
+161
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+55
+66
+67
+58
+69
+70
+56
+64
+60
+83
+78
+61
+105
+93
+60
+117
+98
+55
+117
+98
+55
+105
+93
+60
+83
+78
+61
+56
+64
+60
+55
+66
+67
+144
+125
+110
+239
+182
+144
+250
+176
+132
+247
+165
+111
+249
+159
+103
+246
+156
+93
+249
+159
+103
+247
+165
+111
+249
+174
+124
+252
+185
+144
+195
+157
+134
+89
+84
+82
+48
+58
+59
+63
+69
+60
+95
+87
+59
+111
+94
+57
+123
+102
+54
+117
+98
+55
+105
+93
+60
+83
+78
+61
+56
+64
+60
+51
+62
+63
+124
+111
+99
+219
+170
+138
+248
+180
+134
+251
+168
+115
+249
+159
+103
+249
+152
+92
+249
+152
+92
+246
+156
+93
+247
+165
+111
+249
+174
+124
+252
+185
+144
+167
+142
+123
+70
+79
+77
+51
+62
+63
+75
+74
+61
+100
+89
+56
+117
+98
+55
+123
+102
+54
+105
+93
+60
+83
+78
+61
+51
+62
+63
+63
+74
+74
+172
+150
+134
+109
+106
+99
+51
+62
+63
+83
+78
+61
+95
+87
+59
+65
+67
+64
+65
+67
+64
+209
+171
+139
+249
+189
+146
+249
+189
+146
+249
+189
+146
+250
+197
+158
+212
+173
+150
+109
+106
+99
+48
+58
+59
+63
+69
+60
+95
+87
+59
+111
+94
+57
+123
+102
+54
+117
+98
+55
+95
+87
+59
+62
+63
+61
+48
+58
+59
+137
+127
+115
+146
+135
+124
+48
+58
+59
+75
+74
+61
+95
+87
+59
+75
+74
+61
+48
+58
+59
+161
+144
+134
+217
+187
+166
+48
+58
+59
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+63
+69
+60
+137
+127
+115
+255
+215
+190
+251
+209
+178
+250
+200
+166
+250
+200
+166
+250
+200
+166
+172
+150
+134
+77
+85
+81
+48
+58
+59
+69
+69
+61
+95
+87
+59
+111
+94
+57
+123
+102
+54
+117
+98
+55
+100
+89
+56
+75
+74
+61
+56
+64
+60
+55
+66
+67
+133
+120
+107
+236
+186
+153
+251
+192
+154
+249
+189
+146
+251
+192
+154
+250
+200
+166
+253
+212
+188
+161
+144
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+227
+126
+50
+173
+106
+60
+51
+62
+63
+63
+74
+74
+48
+58
+59
+76
+70
+64
+118
+86
+65
+146
+97
+64
+155
+100
+63
+146
+97
+64
+118
+86
+65
+76
+70
+64
+43
+57
+62
+91
+92
+89
+203
+161
+131
+248
+180
+134
+251
+168
+115
+249
+159
+103
+249
+152
+92
+247
+150
+84
+249
+152
+92
+249
+159
+103
+251
+168
+115
+248
+180
+134
+209
+171
+139
+101
+100
+92
+43
+57
+62
+69
+69
+61
+106
+82
+65
+135
+94
+64
+155
+100
+63
+155
+100
+63
+135
+94
+64
+106
+82
+65
+65
+67
+64
+43
+57
+62
+101
+100
+92
+209
+171
+139
+248
+180
+134
+251
+168
+115
+249
+159
+103
+249
+152
+92
+247
+150
+84
+247
+150
+84
+246
+156
+93
+247
+165
+111
+250
+176
+132
+219
+170
+138
+124
+111
+99
+48
+58
+59
+62
+63
+61
+106
+82
+65
+139
+96
+61
+155
+100
+63
+146
+97
+64
+125
+90
+64
+76
+70
+64
+41
+58
+57
+120
+114
+108
+172
+150
+134
+51
+62
+63
+69
+69
+61
+112
+85
+63
+95
+78
+64
+51
+62
+63
+120
+114
+108
+245
+212
+186
+146
+135
+124
+43
+57
+62
+81
+73
+62
+118
+86
+65
+95
+78
+64
+56
+64
+60
+101
+100
+92
+133
+120
+107
+43
+57
+62
+76
+70
+64
+112
+85
+63
+106
+82
+65
+62
+63
+61
+77
+85
+81
+227
+196
+175
+253
+212
+188
+253
+212
+188
+217
+187
+166
+109
+106
+99
+41
+58
+57
+69
+69
+61
+112
+85
+63
+139
+96
+61
+155
+100
+63
+146
+97
+64
+118
+86
+65
+81
+73
+62
+48
+58
+59
+58
+69
+70
+51
+62
+63
+155
+100
+63
+234
+125
+52
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+251
+192
+154
+247
+165
+111
+249
+146
+83
+247
+130
+53
+247
+118
+39
+247
+111
+26
+247
+111
+26
+246
+116
+28
+247
+123
+41
+248
+138
+64
+249
+146
+83
+249
+159
+103
+250
+176
+132
+219
+170
+138
+124
+111
+99
+43
+57
+62
+62
+63
+61
+106
+82
+65
+135
+94
+64
+155
+100
+63
+155
+100
+63
+139
+96
+61
+106
+82
+65
+69
+69
+61
+43
+57
+62
+91
+92
+89
+195
+157
+134
+251
+192
+154
+252
+185
+144
+248
+180
+134
+248
+180
+134
+252
+185
+144
+203
+161
+131
+63
+74
+74
+62
+63
+61
+106
+82
+65
+112
+85
+63
+69
+69
+61
+55
+66
+67
+146
+135
+124
+63
+74
+74
+56
+64
+60
+95
+78
+64
+112
+85
+63
+76
+70
+64
+48
+58
+59
+172
+150
+134
+253
+204
+176
+251
+209
+178
+251
+209
+178
+187
+166
+150
+77
+85
+81
+48
+58
+59
+81
+73
+62
+125
+90
+64
+146
+97
+64
+155
+100
+63
+139
+96
+61
+95
+78
+64
+56
+64
+60
+58
+69
+70
+161
+144
+134
+109
+106
+99
+51
+62
+63
+95
+78
+64
+112
+85
+63
+65
+67
+64
+65
+67
+64
+204
+141
+99
+246
+156
+93
+250
+139
+73
+247
+130
+53
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+246
+116
+28
+247
+130
+53
+247
+143
+74
+249
+159
+103
+252
+185
+144
+209
+171
+139
+24
+22
+23
+85
+71
+43
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+137
+110
+49
+47
+40
+38
+137
+110
+49
+101
+83
+47
+59
+50
+39
+59
+50
+39
+101
+83
+47
+158
+125
+46
+160
+120
+43
+192
+155
+91
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+237
+233
+225
+152
+147
+147
+81
+77
+76
+55
+48
+48
+115
+102
+92
+212
+173
+150
+251
+192
+154
+249
+174
+124
+247
+165
+111
+249
+159
+103
+249
+159
+103
+247
+165
+111
+249
+174
+124
+249
+189
+146
+238
+205
+179
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+43
+57
+62
+95
+87
+59
+145
+114
+49
+168
+127
+42
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+168
+127
+42
+145
+114
+49
+95
+87
+59
+48
+58
+59
+109
+106
+99
+236
+186
+153
+252
+185
+144
+248
+180
+134
+250
+176
+132
+250
+176
+132
+252
+185
+144
+251
+192
+154
+150
+125
+114
+48
+58
+59
+69
+69
+61
+117
+98
+55
+158
+125
+46
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+168
+127
+42
+152
+119
+47
+100
+89
+56
+56
+64
+60
+63
+74
+74
+186
+157
+134
+249
+189
+146
+248
+180
+134
+249
+174
+124
+249
+174
+124
+250
+176
+132
+252
+185
+144
+251
+192
+154
+133
+120
+107
+48
+58
+59
+75
+74
+61
+137
+110
+49
+168
+127
+42
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+145
+114
+49
+75
+74
+61
+43
+57
+62
+51
+62
+63
+123
+102
+54
+171
+129
+45
+171
+129
+45
+145
+114
+49
+56
+64
+60
+133
+120
+107
+253
+212
+188
+251
+209
+178
+253
+212
+188
+194
+173
+157
+63
+74
+74
+56
+64
+60
+111
+94
+57
+158
+125
+46
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+158
+125
+46
+105
+93
+60
+51
+62
+63
+43
+57
+62
+88
+82
+59
+168
+127
+42
+171
+129
+45
+168
+127
+42
+88
+82
+59
+63
+74
+74
+187
+166
+150
+55
+66
+67
+111
+94
+57
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+63
+69
+60
+137
+127
+115
+255
+215
+190
+255
+215
+190
+255
+215
+190
+245
+212
+186
+133
+120
+107
+48
+58
+59
+75
+74
+61
+129
+106
+52
+158
+125
+46
+171
+129
+45
+171
+129
+45
+171
+129
+45
+168
+127
+42
+171
+129
+45
+168
+127
+42
+145
+114
+49
+95
+87
+59
+51
+62
+63
+77
+85
+81
+212
+173
+150
+253
+204
+176
+253
+204
+176
+251
+209
+178
+255
+215
+190
+161
+144
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+227
+126
+50
+183
+110
+59
+41
+58
+57
+69
+69
+61
+155
+100
+63
+214
+121
+50
+234
+126
+45
+234
+126
+45
+234
+126
+45
+234
+126
+45
+234
+126
+45
+224
+123
+55
+155
+100
+63
+69
+69
+61
+51
+62
+63
+178
+146
+122
+249
+189
+146
+250
+176
+132
+251
+168
+115
+251
+168
+115
+249
+174
+124
+250
+176
+132
+249
+189
+146
+167
+142
+123
+55
+66
+67
+65
+67
+64
+146
+97
+64
+212
+120
+56
+234
+126
+45
+234
+125
+52
+234
+126
+45
+234
+125
+52
+234
+126
+45
+234
+125
+52
+209
+117
+53
+146
+97
+64
+65
+67
+64
+55
+66
+67
+178
+146
+122
+249
+189
+146
+250
+176
+132
+251
+168
+115
+247
+165
+111
+251
+168
+115
+249
+174
+124
+252
+185
+144
+203
+161
+131
+63
+74
+74
+56
+64
+60
+125
+90
+64
+209
+117
+53
+234
+126
+45
+234
+126
+45
+234
+125
+52
+234
+126
+45
+234
+126
+45
+214
+121
+50
+146
+97
+64
+56
+64
+60
+41
+58
+57
+81
+73
+62
+209
+117
+53
+234
+126
+45
+234
+126
+45
+125
+90
+64
+51
+62
+63
+176
+156
+141
+55
+66
+67
+106
+82
+65
+225
+124
+48
+234
+126
+45
+234
+126
+45
+146
+97
+64
+41
+58
+57
+43
+57
+62
+125
+90
+64
+214
+121
+50
+234
+126
+45
+234
+126
+45
+183
+110
+59
+56
+64
+60
+137
+127
+115
+255
+215
+190
+194
+173
+157
+63
+74
+74
+62
+63
+61
+146
+97
+64
+214
+121
+50
+234
+125
+52
+234
+126
+45
+234
+125
+52
+234
+125
+52
+234
+126
+45
+225
+124
+48
+173
+106
+60
+81
+73
+62
+35
+56
+60
+155
+100
+63
+234
+125
+52
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+251
+192
+154
+247
+165
+111
+249
+146
+83
+247
+130
+53
+247
+118
+39
+246
+116
+28
+246
+116
+28
+247
+123
+41
+247
+130
+60
+249
+146
+83
+247
+165
+111
+248
+180
+134
+186
+157
+134
+58
+69
+70
+56
+64
+60
+135
+94
+64
+199
+115
+54
+234
+125
+52
+234
+126
+45
+234
+125
+52
+234
+125
+52
+234
+126
+45
+234
+125
+52
+212
+120
+56
+155
+100
+63
+76
+70
+64
+51
+62
+63
+146
+135
+124
+251
+209
+178
+253
+204
+176
+250
+200
+166
+253
+204
+176
+101
+100
+92
+69
+69
+61
+194
+112
+58
+234
+126
+45
+234
+126
+45
+199
+115
+54
+65
+67
+64
+35
+56
+60
+81
+73
+62
+194
+112
+58
+234
+125
+52
+234
+126
+45
+214
+121
+50
+95
+78
+64
+63
+74
+74
+238
+205
+179
+255
+215
+190
+161
+144
+134
+43
+57
+62
+81
+73
+62
+173
+106
+60
+225
+124
+48
+234
+126
+45
+234
+126
+45
+234
+125
+52
+234
+126
+45
+234
+126
+45
+194
+112
+58
+95
+78
+64
+41
+58
+57
+48
+58
+59
+155
+100
+63
+234
+126
+45
+234
+126
+45
+199
+115
+54
+69
+69
+61
+99
+90
+79
+251
+168
+115
+247
+150
+84
+247
+130
+60
+247
+123
+41
+247
+111
+26
+246
+109
+10
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+103
+7
+247
+111
+26
+247
+118
+39
+247
+130
+60
+247
+150
+84
+249
+174
+124
+251
+192
+154
+124
+111
+99
+35
+31
+30
+137
+110
+49
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+47
+40
+38
+108
+87
+46
+175
+132
+40
+161
+127
+40
+168
+127
+42
+171
+129
+45
+158
+125
+46
+152
+119
+47
+203
+161
+131
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+186
+181
+179
+89
+84
+82
+47
+40
+38
+139
+115
+96
+236
+186
+153
+252
+185
+144
+250
+176
+132
+249
+174
+124
+250
+176
+132
+252
+185
+144
+250
+197
+158
+238
+205
+179
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+111
+94
+57
+171
+129
+45
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+171
+129
+45
+111
+94
+57
+48
+58
+59
+109
+106
+99
+253
+204
+176
+250
+200
+166
+250
+200
+166
+250
+200
+166
+253
+204
+176
+137
+127
+115
+43
+57
+62
+88
+82
+59
+158
+125
+46
+171
+129
+45
+161
+127
+40
+158
+125
+46
+158
+125
+46
+168
+127
+42
+161
+127
+40
+158
+125
+46
+158
+125
+46
+168
+127
+42
+171
+129
+45
+145
+114
+49
+69
+69
+61
+51
+62
+63
+187
+166
+150
+250
+200
+166
+250
+197
+158
+251
+192
+154
+250
+197
+158
+253
+204
+176
+133
+120
+107
+48
+58
+59
+95
+87
+59
+168
+127
+42
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+158
+125
+46
+75
+74
+61
+62
+63
+61
+168
+127
+42
+161
+127
+40
+158
+125
+46
+171
+129
+45
+83
+78
+61
+91
+92
+89
+255
+215
+190
+255
+215
+190
+207
+178
+158
+58
+69
+70
+63
+69
+60
+145
+114
+49
+171
+129
+45
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+171
+129
+45
+105
+93
+60
+43
+57
+62
+137
+110
+49
+171
+129
+45
+158
+125
+46
+171
+129
+45
+137
+110
+49
+51
+62
+63
+146
+135
+124
+58
+69
+70
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+152
+119
+47
+65
+67
+64
+137
+127
+115
+255
+215
+190
+255
+215
+190
+245
+212
+186
+120
+114
+108
+48
+58
+59
+100
+89
+56
+168
+127
+42
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+171
+129
+45
+129
+106
+52
+61
+67
+58
+63
+74
+74
+207
+178
+158
+255
+215
+190
+255
+215
+190
+255
+215
+190
+161
+144
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+234
+125
+52
+173
+106
+60
+95
+78
+64
+209
+117
+53
+234
+126
+45
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+126
+45
+209
+117
+53
+89
+75
+66
+51
+62
+63
+187
+166
+150
+250
+197
+158
+251
+192
+154
+249
+189
+146
+251
+192
+154
+250
+200
+166
+161
+144
+134
+41
+58
+57
+95
+78
+64
+199
+115
+54
+234
+126
+45
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+126
+45
+199
+115
+54
+89
+75
+66
+41
+58
+57
+167
+142
+123
+250
+200
+166
+251
+192
+154
+252
+185
+144
+249
+189
+146
+250
+197
+158
+212
+173
+150
+63
+74
+74
+69
+69
+61
+183
+110
+59
+234
+126
+45
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+126
+45
+163
+104
+61
+41
+58
+57
+135
+94
+64
+234
+126
+45
+224
+123
+55
+234
+125
+52
+188
+112
+56
+51
+62
+63
+109
+106
+99
+51
+62
+63
+188
+112
+56
+234
+126
+45
+224
+123
+55
+234
+125
+52
+188
+112
+56
+43
+57
+62
+112
+85
+63
+234
+126
+45
+227
+126
+50
+224
+123
+55
+227
+126
+50
+234
+126
+45
+95
+78
+64
+109
+106
+99
+217
+187
+166
+58
+69
+70
+69
+69
+61
+188
+112
+56
+234
+126
+45
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+125
+52
+214
+121
+50
+95
+78
+64
+146
+97
+64
+234
+125
+52
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+251
+192
+154
+247
+165
+111
+249
+146
+83
+247
+130
+53
+247
+123
+41
+247
+118
+39
+247
+123
+41
+247
+130
+53
+247
+143
+74
+249
+159
+103
+250
+176
+132
+186
+157
+134
+51
+62
+63
+81
+73
+62
+188
+112
+56
+234
+126
+45
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+126
+45
+212
+120
+56
+106
+82
+65
+41
+58
+57
+146
+135
+124
+255
+215
+190
+255
+215
+190
+234
+204
+183
+63
+74
+74
+125
+90
+64
+234
+126
+45
+224
+123
+55
+227
+126
+50
+234
+125
+52
+89
+75
+66
+62
+63
+61
+199
+115
+54
+234
+126
+45
+224
+123
+55
+224
+123
+55
+234
+126
+45
+163
+104
+61
+48
+58
+59
+217
+187
+166
+172
+150
+134
+41
+58
+57
+106
+82
+65
+214
+121
+50
+234
+126
+45
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+225
+124
+48
+81
+73
+62
+69
+69
+61
+227
+126
+50
+227
+126
+50
+224
+123
+55
+238
+123
+45
+125
+90
+64
+55
+66
+67
+250
+176
+132
+246
+156
+93
+250
+139
+73
+247
+123
+41
+247
+111
+26
+246
+109
+10
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+123
+41
+250
+139
+73
+249
+159
+103
+248
+180
+134
+232
+190
+161
+47
+40
+38
+71
+60
+43
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+71
+60
+43
+71
+60
+43
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+160
+120
+43
+170
+137
+67
+237
+233
+225
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+186
+181
+179
+74
+68
+68
+89
+75
+66
+212
+173
+150
+250
+197
+158
+251
+192
+154
+249
+189
+146
+251
+192
+154
+253
+204
+176
+234
+204
+183
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+152
+119
+47
+168
+127
+42
+158
+125
+46
+158
+125
+46
+168
+127
+42
+171
+129
+45
+171
+129
+45
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+111
+94
+57
+48
+58
+59
+161
+144
+134
+255
+215
+190
+255
+215
+190
+255
+215
+190
+172
+150
+134
+48
+58
+59
+95
+87
+59
+168
+127
+42
+168
+127
+42
+158
+125
+46
+161
+127
+40
+171
+129
+45
+158
+125
+46
+152
+119
+47
+152
+119
+47
+168
+127
+42
+168
+127
+42
+158
+125
+46
+158
+125
+46
+168
+127
+42
+152
+119
+47
+69
+69
+61
+58
+69
+70
+217
+187
+166
+255
+215
+190
+255
+215
+190
+255
+215
+190
+172
+150
+134
+43
+57
+62
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+171
+129
+45
+171
+129
+45
+171
+129
+45
+158
+125
+46
+168
+127
+42
+137
+110
+49
+83
+78
+61
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+88
+82
+59
+84
+85
+82
+255
+215
+190
+238
+205
+179
+84
+85
+82
+62
+63
+61
+145
+114
+49
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+171
+129
+45
+171
+129
+45
+171
+129
+45
+168
+127
+42
+161
+127
+40
+158
+125
+46
+88
+82
+59
+152
+119
+47
+161
+127
+40
+158
+125
+46
+168
+127
+42
+145
+114
+49
+51
+62
+63
+137
+127
+115
+58
+69
+70
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+152
+119
+47
+63
+69
+60
+137
+127
+115
+255
+215
+190
+255
+215
+190
+137
+127
+115
+48
+58
+59
+105
+93
+60
+171
+129
+45
+161
+127
+40
+158
+125
+46
+168
+127
+42
+168
+127
+42
+158
+125
+46
+152
+119
+47
+152
+119
+47
+168
+127
+42
+171
+129
+45
+158
+125
+46
+158
+125
+46
+171
+129
+45
+145
+114
+49
+62
+63
+61
+70
+79
+77
+227
+196
+175
+255
+215
+190
+255
+215
+190
+161
+144
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+227
+126
+50
+212
+120
+56
+214
+121
+50
+227
+126
+50
+224
+123
+55
+227
+126
+50
+234
+126
+45
+234
+126
+45
+234
+125
+52
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+209
+117
+53
+76
+70
+64
+70
+79
+77
+234
+204
+183
+253
+212
+188
+251
+209
+178
+253
+212
+188
+187
+166
+150
+43
+57
+62
+95
+78
+64
+225
+124
+48
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+125
+52
+234
+126
+45
+234
+126
+45
+227
+126
+50
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+125
+52
+214
+121
+50
+95
+78
+64
+48
+58
+59
+194
+173
+157
+253
+212
+188
+251
+209
+178
+251
+209
+178
+245
+212
+186
+91
+92
+89
+62
+63
+61
+188
+112
+56
+234
+126
+45
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+125
+52
+234
+125
+52
+234
+126
+45
+227
+126
+50
+224
+123
+55
+234
+126
+45
+125
+90
+64
+146
+97
+64
+234
+125
+52
+224
+123
+55
+227
+126
+50
+194
+112
+58
+56
+64
+60
+97
+98
+96
+56
+64
+60
+188
+112
+56
+227
+126
+50
+224
+123
+55
+224
+123
+55
+212
+120
+56
+183
+110
+59
+214
+121
+50
+227
+126
+50
+224
+123
+55
+227
+126
+50
+227
+126
+50
+234
+126
+45
+95
+78
+64
+84
+85
+82
+91
+92
+89
+62
+63
+61
+188
+112
+56
+234
+126
+45
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+125
+52
+234
+126
+45
+234
+126
+45
+227
+126
+50
+224
+123
+55
+227
+126
+50
+224
+123
+55
+209
+117
+53
+227
+126
+50
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+251
+192
+154
+247
+165
+111
+249
+146
+83
+247
+130
+60
+247
+123
+41
+247
+123
+41
+247
+130
+53
+248
+138
+64
+249
+152
+92
+249
+174
+124
+209
+171
+139
+58
+69
+70
+81
+73
+62
+209
+117
+53
+234
+125
+52
+224
+123
+55
+224
+123
+55
+227
+126
+50
+227
+126
+50
+234
+125
+52
+234
+125
+52
+234
+125
+52
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+227
+126
+50
+112
+85
+63
+41
+58
+57
+172
+150
+134
+255
+215
+190
+227
+196
+175
+63
+74
+74
+135
+94
+64
+234
+125
+52
+224
+123
+55
+224
+123
+55
+224
+123
+55
+194
+112
+58
+199
+115
+54
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+238
+128
+40
+163
+104
+61
+55
+66
+67
+161
+144
+134
+58
+69
+70
+95
+78
+64
+225
+124
+48
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+227
+126
+50
+234
+126
+45
+234
+126
+45
+234
+125
+52
+227
+126
+50
+234
+125
+52
+173
+106
+60
+118
+86
+65
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+125
+52
+146
+97
+64
+51
+62
+63
+252
+185
+144
+249
+159
+103
+247
+143
+74
+247
+130
+53
+246
+116
+28
+246
+109
+10
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+111
+26
+247
+118
+39
+247
+130
+53
+249
+146
+83
+251
+168
+115
+251
+192
+154
+154
+133
+118
+24
+22
+23
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+108
+87
+46
+47
+40
+38
+158
+125
+46
+158
+125
+46
+158
+125
+46
+160
+120
+43
+156
+125
+62
+224
+207
+180
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+152
+147
+147
+35
+31
+30
+55
+48
+48
+154
+133
+118
+217
+187
+166
+253
+204
+176
+253
+204
+176
+253
+212
+188
+234
+204
+183
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+158
+125
+46
+168
+127
+42
+158
+125
+46
+123
+102
+54
+105
+93
+60
+111
+94
+57
+129
+106
+52
+168
+127
+42
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+83
+78
+61
+58
+69
+70
+227
+196
+175
+255
+215
+190
+217
+187
+166
+58
+69
+70
+75
+74
+61
+168
+127
+42
+161
+127
+40
+158
+125
+46
+168
+127
+42
+152
+119
+47
+105
+93
+60
+69
+69
+61
+62
+63
+61
+62
+63
+61
+75
+74
+61
+117
+98
+55
+161
+127
+40
+161
+127
+40
+158
+125
+46
+171
+129
+45
+145
+114
+49
+56
+64
+60
+97
+98
+96
+245
+212
+186
+255
+215
+190
+227
+196
+175
+63
+74
+74
+75
+74
+61
+158
+125
+46
+168
+127
+42
+158
+125
+46
+158
+125
+46
+168
+127
+42
+158
+125
+46
+129
+106
+52
+111
+94
+57
+105
+93
+60
+129
+106
+52
+158
+125
+46
+168
+127
+42
+161
+127
+40
+152
+119
+47
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+84
+85
+82
+255
+215
+190
+161
+144
+134
+48
+58
+59
+123
+102
+54
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+145
+114
+49
+117
+98
+55
+105
+93
+60
+117
+98
+55
+145
+114
+49
+171
+129
+45
+168
+127
+42
+152
+119
+47
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+145
+114
+49
+51
+62
+63
+137
+127
+115
+58
+69
+70
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+63
+69
+60
+137
+127
+115
+255
+215
+190
+194
+173
+157
+48
+58
+59
+88
+82
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+152
+119
+47
+95
+87
+59
+69
+69
+61
+62
+63
+61
+62
+63
+61
+83
+78
+61
+123
+102
+54
+168
+127
+42
+161
+127
+40
+158
+125
+46
+171
+129
+45
+129
+106
+52
+51
+62
+63
+120
+114
+108
+255
+215
+190
+255
+215
+190
+161
+144
+134
+56
+64
+60
+199
+115
+54
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+227
+126
+50
+227
+126
+50
+227
+126
+50
+188
+112
+56
+146
+97
+64
+135
+94
+64
+146
+97
+64
+199
+115
+54
+234
+125
+52
+224
+123
+55
+224
+123
+55
+224
+123
+55
+234
+126
+45
+173
+106
+60
+48
+58
+59
+146
+135
+124
+255
+215
+190
+255
+215
+190
+234
+204
+183
+77
+85
+81
+76
+70
+64
+214
+121
+50
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+125
+52
+214
+121
+50
+163
+104
+61
+135
+94
+64
+135
+94
+64
+163
+104
+61
+224
+123
+55
+234
+125
+52
+224
+123
+55
+224
+123
+55
+227
+126
+50
+212
+120
+56
+76
+70
+64
+77
+85
+81
+238
+205
+179
+255
+215
+190
+255
+215
+190
+161
+144
+134
+48
+58
+59
+155
+100
+63
+234
+126
+45
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+125
+52
+199
+115
+54
+155
+100
+63
+135
+94
+64
+146
+97
+64
+188
+112
+56
+227
+126
+50
+227
+126
+50
+214
+121
+50
+209
+117
+53
+227
+126
+50
+224
+123
+55
+227
+126
+50
+194
+112
+58
+56
+64
+60
+101
+100
+92
+56
+64
+60
+188
+112
+56
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+234
+125
+52
+227
+126
+50
+224
+123
+55
+227
+126
+50
+227
+126
+50
+199
+115
+54
+125
+90
+64
+51
+62
+63
+55
+66
+67
+41
+58
+57
+146
+97
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+224
+123
+55
+234
+126
+45
+209
+117
+53
+155
+100
+63
+135
+94
+64
+139
+96
+61
+183
+110
+59
+227
+126
+50
+227
+126
+50
+227
+126
+50
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+251
+192
+154
+247
+165
+111
+249
+146
+83
+247
+130
+60
+247
+130
+53
+247
+130
+53
+247
+130
+60
+249
+146
+83
+247
+165
+111
+252
+185
+144
+101
+100
+92
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+227
+126
+50
+173
+106
+60
+135
+94
+64
+135
+94
+64
+163
+104
+61
+214
+121
+50
+234
+125
+52
+224
+123
+55
+224
+123
+55
+227
+126
+50
+224
+123
+55
+81
+73
+62
+58
+69
+70
+227
+196
+175
+234
+204
+183
+63
+74
+74
+135
+94
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+227
+126
+50
+224
+123
+55
+227
+126
+50
+234
+125
+52
+212
+120
+56
+155
+100
+63
+69
+69
+61
+76
+78
+76
+84
+85
+82
+65
+67
+64
+209
+117
+53
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+227
+126
+50
+183
+110
+59
+139
+96
+61
+135
+94
+64
+155
+100
+63
+209
+117
+53
+234
+125
+52
+224
+123
+55
+212
+120
+56
+224
+123
+55
+224
+123
+55
+224
+123
+55
+234
+126
+45
+139
+96
+61
+55
+66
+67
+251
+192
+154
+251
+168
+115
+249
+146
+83
+247
+130
+53
+247
+118
+39
+246
+109
+10
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+123
+41
+248
+138
+64
+249
+152
+92
+250
+176
+132
+232
+190
+161
+65
+58
+56
+59
+50
+39
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+145
+114
+49
+47
+40
+38
+129
+106
+52
+168
+127
+42
+160
+120
+43
+158
+125
+46
+224
+207
+180
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+219
+212
+208
+62
+63
+61
+35
+31
+30
+91
+92
+89
+164
+158
+157
+186
+181
+179
+82
+69
+65
+176
+156
+141
+255
+215
+190
+255
+215
+190
+238
+205
+179
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+129
+106
+52
+65
+67
+64
+48
+58
+59
+55
+66
+67
+55
+66
+67
+48
+58
+59
+83
+78
+61
+145
+114
+49
+168
+127
+42
+158
+125
+46
+158
+125
+46
+168
+127
+42
+137
+110
+49
+51
+62
+63
+146
+135
+124
+255
+215
+190
+120
+114
+108
+56
+64
+60
+145
+114
+49
+171
+129
+45
+158
+125
+46
+168
+127
+42
+152
+119
+47
+69
+69
+61
+43
+57
+62
+109
+106
+99
+146
+135
+124
+137
+127
+115
+91
+92
+89
+43
+57
+62
+88
+82
+59
+158
+125
+46
+161
+127
+40
+158
+125
+46
+171
+129
+45
+117
+98
+55
+48
+58
+59
+172
+150
+134
+255
+215
+190
+146
+135
+124
+51
+62
+63
+137
+110
+49
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+145
+114
+49
+75
+74
+61
+48
+58
+59
+55
+66
+67
+55
+66
+67
+48
+58
+59
+69
+69
+61
+137
+110
+49
+168
+127
+42
+161
+127
+40
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+91
+92
+89
+234
+204
+183
+70
+79
+77
+83
+78
+61
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+111
+94
+57
+56
+64
+60
+43
+57
+62
+58
+69
+70
+48
+58
+59
+56
+64
+60
+100
+89
+56
+158
+125
+46
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+145
+114
+49
+51
+62
+63
+137
+127
+115
+58
+69
+70
+111
+94
+57
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+65
+67
+64
+137
+127
+115
+255
+215
+190
+97
+98
+96
+62
+63
+61
+152
+119
+47
+168
+127
+42
+158
+125
+46
+168
+127
+42
+137
+110
+49
+62
+63
+61
+51
+62
+63
+120
+114
+108
+146
+135
+124
+137
+127
+115
+84
+85
+82
+43
+57
+62
+95
+87
+59
+168
+127
+42
+158
+125
+46
+158
+125
+46
+171
+129
+45
+100
+89
+56
+43
+57
+62
+194
+173
+157
+255
+215
+190
+161
+144
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+224
+123
+55
+118
+86
+65
+51
+62
+63
+43
+57
+62
+58
+69
+70
+41
+58
+57
+56
+64
+60
+146
+97
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+125
+52
+106
+82
+65
+63
+74
+74
+234
+204
+183
+255
+215
+190
+161
+144
+134
+48
+58
+59
+173
+106
+60
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+125
+52
+183
+110
+59
+76
+70
+64
+43
+57
+62
+55
+66
+67
+55
+66
+67
+48
+58
+59
+81
+73
+62
+183
+110
+59
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+126
+45
+163
+104
+61
+48
+58
+59
+161
+144
+134
+255
+215
+190
+234
+204
+183
+63
+74
+74
+95
+78
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+227
+126
+50
+227
+126
+50
+135
+94
+64
+62
+63
+61
+43
+57
+62
+58
+69
+70
+43
+57
+62
+51
+62
+63
+125
+90
+64
+225
+124
+48
+227
+126
+50
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+194
+112
+58
+56
+64
+60
+97
+98
+96
+56
+64
+60
+188
+112
+56
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+234
+125
+52
+227
+126
+50
+173
+106
+60
+95
+78
+64
+56
+64
+60
+51
+62
+63
+120
+114
+108
+70
+79
+77
+89
+75
+66
+225
+124
+48
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+126
+45
+163
+104
+61
+65
+67
+64
+41
+58
+57
+55
+66
+67
+51
+62
+63
+48
+58
+59
+106
+82
+65
+209
+117
+53
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+251
+192
+154
+247
+165
+111
+249
+146
+83
+248
+138
+64
+247
+130
+53
+247
+130
+60
+250
+139
+73
+246
+156
+93
+250
+176
+132
+186
+157
+134
+41
+58
+57
+146
+97
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+234
+125
+52
+199
+115
+54
+89
+75
+66
+48
+58
+59
+51
+62
+63
+55
+66
+67
+43
+57
+62
+76
+70
+64
+173
+106
+60
+234
+125
+52
+224
+123
+55
+224
+123
+55
+227
+126
+50
+183
+110
+59
+51
+62
+63
+137
+127
+115
+234
+204
+183
+63
+74
+74
+135
+94
+64
+234
+125
+52
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+126
+45
+199
+115
+54
+125
+90
+64
+69
+69
+61
+41
+58
+57
+97
+98
+96
+146
+135
+124
+51
+62
+63
+146
+97
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+227
+126
+50
+214
+121
+50
+106
+82
+65
+48
+58
+59
+51
+62
+63
+55
+66
+67
+41
+58
+57
+65
+67
+64
+163
+104
+61
+234
+126
+45
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+234
+125
+52
+139
+96
+61
+55
+66
+67
+250
+197
+158
+251
+168
+115
+247
+150
+84
+247
+130
+60
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+246
+116
+28
+247
+130
+53
+247
+143
+74
+249
+159
+103
+252
+185
+144
+154
+133
+118
+24
+22
+23
+108
+87
+46
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+71
+60
+43
+85
+71
+43
+171
+129
+45
+160
+120
+43
+216
+194
+154
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+237
+233
+225
+65
+58
+56
+62
+63
+61
+219
+212
+208
+253
+255
+252
+237
+233
+225
+120
+114
+108
+35
+31
+30
+55
+48
+48
+227
+196
+175
+255
+215
+190
+238
+205
+179
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+129
+106
+52
+51
+62
+63
+84
+85
+82
+187
+166
+150
+227
+196
+175
+227
+196
+175
+161
+144
+134
+51
+62
+63
+69
+69
+61
+152
+119
+47
+168
+127
+42
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+91
+92
+89
+217
+187
+166
+55
+66
+67
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+75
+74
+61
+58
+69
+70
+187
+166
+150
+255
+215
+190
+255
+215
+190
+255
+215
+190
+245
+212
+186
+161
+144
+134
+43
+57
+62
+100
+89
+56
+171
+129
+45
+158
+125
+46
+158
+125
+46
+161
+127
+40
+75
+74
+61
+84
+85
+82
+234
+204
+183
+76
+78
+76
+88
+82
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+145
+114
+49
+62
+63
+61
+63
+74
+74
+176
+156
+141
+227
+196
+175
+227
+196
+175
+176
+156
+141
+70
+79
+77
+62
+63
+61
+145
+114
+49
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+97
+98
+96
+172
+150
+134
+48
+58
+59
+129
+106
+52
+168
+127
+42
+158
+125
+46
+158
+125
+46
+171
+129
+45
+105
+93
+60
+43
+57
+62
+120
+114
+108
+207
+178
+158
+227
+196
+175
+217
+187
+166
+120
+114
+108
+41
+58
+57
+95
+87
+59
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+145
+114
+49
+56
+64
+60
+137
+127
+115
+58
+69
+70
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+65
+67
+64
+146
+135
+124
+207
+178
+158
+48
+58
+59
+111
+94
+57
+171
+129
+45
+158
+125
+46
+168
+127
+42
+152
+119
+47
+62
+63
+61
+70
+79
+77
+207
+178
+158
+255
+215
+190
+255
+215
+190
+255
+215
+190
+238
+205
+179
+137
+127
+115
+43
+57
+62
+117
+98
+55
+168
+127
+42
+158
+125
+46
+168
+127
+42
+152
+119
+47
+62
+63
+61
+109
+106
+99
+255
+215
+190
+161
+144
+134
+56
+64
+60
+199
+115
+54
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+227
+126
+50
+106
+82
+65
+41
+58
+57
+137
+127
+115
+217
+187
+166
+227
+196
+175
+207
+178
+158
+109
+106
+99
+41
+58
+57
+146
+97
+64
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+125
+52
+173
+106
+60
+48
+58
+59
+176
+156
+141
+245
+212
+186
+70
+79
+77
+95
+78
+64
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+125
+52
+188
+112
+56
+56
+64
+60
+70
+79
+77
+176
+156
+141
+227
+196
+175
+227
+196
+175
+176
+156
+141
+63
+74
+74
+62
+63
+61
+194
+112
+58
+227
+126
+50
+224
+123
+55
+227
+126
+50
+227
+126
+50
+95
+78
+64
+77
+85
+81
+245
+212
+186
+172
+150
+134
+48
+58
+59
+173
+106
+60
+234
+126
+45
+224
+123
+55
+224
+123
+55
+234
+125
+52
+135
+94
+64
+35
+56
+60
+120
+114
+108
+207
+178
+158
+227
+196
+175
+217
+187
+166
+133
+120
+107
+35
+56
+60
+118
+86
+65
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+194
+112
+58
+56
+64
+60
+101
+100
+92
+56
+64
+60
+188
+112
+56
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+194
+112
+58
+95
+78
+64
+48
+58
+59
+70
+79
+77
+146
+135
+124
+217
+187
+166
+207
+178
+158
+51
+62
+63
+155
+100
+63
+234
+126
+45
+224
+123
+55
+224
+123
+55
+234
+125
+52
+163
+104
+61
+48
+58
+59
+91
+92
+89
+194
+173
+157
+227
+196
+175
+217
+187
+166
+146
+135
+124
+43
+57
+62
+89
+75
+66
+214
+121
+50
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+251
+192
+154
+247
+165
+111
+247
+150
+84
+248
+138
+64
+247
+130
+60
+248
+138
+64
+249
+146
+83
+247
+165
+111
+239
+182
+144
+91
+92
+89
+76
+70
+64
+224
+123
+55
+227
+126
+50
+224
+123
+55
+227
+126
+50
+209
+117
+53
+76
+70
+64
+55
+66
+67
+172
+150
+134
+227
+196
+175
+227
+196
+175
+187
+166
+150
+77
+85
+81
+51
+62
+63
+173
+106
+60
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+126
+45
+118
+86
+65
+58
+69
+70
+217
+187
+166
+70
+79
+77
+135
+94
+64
+234
+125
+52
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+225
+124
+48
+125
+90
+64
+56
+64
+60
+55
+66
+67
+120
+114
+108
+187
+166
+150
+245
+212
+186
+120
+114
+108
+76
+70
+64
+214
+121
+50
+227
+126
+50
+224
+123
+55
+227
+126
+50
+225
+124
+48
+95
+78
+64
+43
+57
+62
+146
+135
+124
+217
+187
+166
+227
+196
+175
+194
+173
+157
+91
+92
+89
+48
+58
+59
+163
+104
+61
+234
+125
+52
+224
+123
+55
+224
+123
+55
+224
+123
+55
+234
+126
+45
+139
+96
+61
+55
+66
+67
+250
+197
+158
+249
+174
+124
+247
+150
+84
+247
+130
+60
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+111
+26
+247
+118
+39
+247
+130
+53
+249
+146
+83
+251
+168
+115
+239
+182
+144
+65
+58
+56
+59
+50
+39
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+108
+87
+46
+47
+40
+38
+152
+119
+47
+170
+137
+67
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+174
+168
+167
+24
+22
+23
+109
+106
+99
+152
+147
+147
+97
+98
+96
+47
+40
+38
+24
+22
+23
+35
+31
+30
+35
+31
+30
+176
+156
+141
+255
+215
+190
+238
+205
+179
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+69
+69
+61
+76
+78
+76
+227
+196
+175
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+187
+166
+150
+51
+62
+63
+95
+87
+59
+168
+127
+42
+158
+125
+46
+158
+125
+46
+171
+129
+45
+117
+98
+55
+55
+66
+67
+109
+106
+99
+48
+58
+59
+137
+110
+49
+168
+127
+42
+158
+125
+46
+168
+127
+42
+117
+98
+55
+48
+58
+59
+187
+166
+150
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+137
+127
+115
+51
+62
+63
+145
+114
+49
+168
+127
+42
+158
+125
+46
+171
+129
+45
+117
+98
+55
+55
+66
+67
+137
+127
+115
+55
+66
+67
+123
+102
+54
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+55
+66
+67
+207
+178
+158
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+217
+187
+166
+58
+69
+70
+83
+78
+61
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+88
+82
+59
+91
+92
+89
+109
+106
+99
+69
+69
+61
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+145
+114
+49
+51
+62
+63
+120
+114
+108
+245
+212
+186
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+137
+127
+115
+48
+58
+59
+129
+106
+52
+168
+127
+42
+158
+125
+46
+158
+125
+46
+168
+127
+42
+145
+114
+49
+51
+62
+63
+137
+127
+115
+58
+69
+70
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+65
+67
+64
+146
+135
+124
+146
+135
+124
+62
+63
+61
+152
+119
+47
+168
+127
+42
+158
+125
+46
+168
+127
+42
+100
+89
+56
+51
+62
+63
+207
+178
+158
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+109
+106
+99
+63
+69
+60
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+100
+89
+56
+51
+62
+63
+227
+196
+175
+172
+150
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+126
+45
+155
+100
+63
+41
+58
+57
+146
+135
+124
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+245
+212
+186
+109
+106
+99
+56
+64
+60
+199
+115
+54
+227
+126
+50
+224
+123
+55
+227
+126
+50
+224
+123
+55
+76
+70
+64
+109
+106
+99
+194
+173
+157
+43
+57
+62
+163
+104
+61
+234
+125
+52
+224
+123
+55
+224
+123
+55
+225
+124
+48
+89
+75
+66
+63
+74
+74
+217
+187
+166
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+217
+187
+166
+58
+69
+70
+95
+78
+64
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+126
+45
+155
+100
+63
+43
+57
+62
+207
+178
+158
+109
+106
+99
+76
+70
+64
+224
+123
+55
+227
+126
+50
+224
+123
+55
+227
+126
+50
+194
+112
+58
+51
+62
+63
+120
+114
+108
+253
+212
+188
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+137
+127
+115
+48
+58
+59
+173
+106
+60
+234
+125
+52
+224
+123
+55
+224
+123
+55
+227
+126
+50
+194
+112
+58
+56
+64
+60
+101
+100
+92
+56
+64
+60
+188
+112
+56
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+188
+112
+56
+62
+63
+61
+58
+69
+70
+161
+144
+134
+234
+204
+183
+255
+215
+190
+255
+215
+190
+137
+127
+115
+62
+63
+61
+209
+117
+53
+227
+126
+50
+224
+123
+55
+227
+126
+50
+212
+120
+56
+69
+69
+61
+77
+85
+81
+234
+204
+183
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+176
+156
+141
+35
+56
+60
+135
+94
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+251
+192
+154
+251
+168
+115
+247
+150
+84
+250
+139
+73
+248
+138
+64
+250
+139
+73
+249
+152
+92
+249
+174
+124
+209
+171
+139
+43
+57
+62
+135
+94
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+234
+126
+45
+112
+85
+63
+51
+62
+63
+194
+173
+157
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+227
+196
+175
+70
+79
+77
+76
+70
+64
+214
+121
+50
+227
+126
+50
+224
+123
+55
+227
+126
+50
+183
+110
+59
+48
+58
+59
+146
+135
+124
+77
+85
+81
+135
+94
+64
+234
+125
+52
+224
+123
+55
+224
+123
+55
+227
+126
+50
+214
+121
+50
+95
+78
+64
+35
+56
+60
+120
+114
+108
+217
+187
+166
+255
+215
+190
+255
+215
+190
+227
+196
+175
+58
+69
+70
+125
+90
+64
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+125
+52
+139
+96
+61
+41
+58
+57
+172
+150
+134
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+234
+204
+183
+77
+85
+81
+76
+70
+64
+214
+121
+50
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+125
+52
+139
+96
+61
+51
+62
+63
+250
+200
+166
+249
+174
+124
+249
+152
+92
+247
+130
+60
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+111
+26
+247
+123
+41
+248
+138
+64
+249
+152
+92
+249
+174
+124
+178
+146
+122
+24
+22
+23
+101
+83
+47
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+152
+119
+47
+47
+40
+38
+123
+102
+54
+209
+171
+139
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+164
+158
+157
+24
+22
+23
+24
+22
+23
+24
+22
+23
+24
+22
+23
+24
+22
+23
+35
+31
+30
+35
+31
+30
+47
+40
+38
+194
+173
+157
+255
+215
+190
+238
+205
+179
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+129
+106
+52
+48
+58
+59
+176
+156
+141
+255
+215
+190
+255
+215
+190
+253
+212
+188
+255
+215
+190
+255
+215
+190
+255
+215
+190
+120
+114
+108
+56
+64
+60
+152
+119
+47
+161
+127
+40
+158
+125
+46
+168
+127
+42
+137
+110
+49
+51
+62
+63
+48
+58
+59
+75
+74
+61
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+63
+74
+74
+194
+173
+157
+207
+178
+158
+207
+178
+158
+207
+178
+158
+207
+178
+158
+207
+178
+158
+207
+178
+158
+172
+150
+134
+48
+58
+59
+111
+94
+57
+171
+129
+45
+158
+125
+46
+168
+127
+42
+152
+119
+47
+56
+64
+60
+51
+62
+63
+56
+64
+60
+152
+119
+47
+168
+127
+42
+158
+125
+46
+168
+127
+42
+145
+114
+49
+51
+62
+63
+146
+135
+124
+255
+215
+190
+255
+215
+190
+253
+212
+188
+253
+212
+188
+255
+215
+190
+255
+215
+190
+146
+135
+124
+51
+62
+63
+145
+114
+49
+168
+127
+42
+158
+125
+46
+158
+125
+46
+168
+127
+42
+88
+82
+59
+70
+79
+77
+63
+74
+74
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+171
+129
+45
+95
+87
+59
+55
+66
+67
+227
+196
+175
+255
+215
+190
+255
+215
+190
+253
+212
+188
+255
+215
+190
+255
+215
+190
+234
+204
+183
+70
+79
+77
+88
+82
+59
+168
+127
+42
+158
+125
+46
+158
+125
+46
+168
+127
+42
+145
+114
+49
+56
+64
+60
+137
+127
+115
+58
+69
+70
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+63
+69
+60
+137
+127
+115
+97
+98
+96
+83
+78
+61
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+69
+69
+61
+84
+85
+82
+207
+178
+158
+207
+178
+158
+207
+178
+158
+207
+178
+158
+207
+178
+158
+207
+178
+158
+217
+187
+166
+146
+135
+124
+48
+58
+59
+129
+106
+52
+168
+127
+42
+158
+125
+46
+168
+127
+42
+129
+106
+52
+51
+62
+63
+187
+166
+150
+176
+156
+141
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+89
+75
+66
+70
+79
+77
+245
+212
+186
+255
+215
+190
+255
+215
+190
+253
+212
+188
+255
+215
+190
+255
+215
+190
+217
+187
+166
+43
+57
+62
+125
+90
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+234
+126
+45
+106
+82
+65
+77
+85
+81
+133
+120
+107
+62
+63
+61
+209
+117
+53
+227
+126
+50
+224
+123
+55
+227
+126
+50
+183
+110
+59
+48
+58
+59
+161
+144
+134
+255
+215
+190
+255
+215
+190
+253
+212
+188
+253
+212
+188
+255
+215
+190
+255
+215
+190
+146
+135
+124
+48
+58
+59
+188
+112
+56
+227
+126
+50
+224
+123
+55
+227
+126
+50
+199
+115
+54
+62
+63
+61
+133
+120
+107
+77
+85
+81
+118
+86
+65
+234
+126
+45
+224
+123
+55
+224
+123
+55
+234
+126
+45
+125
+90
+64
+55
+66
+67
+227
+196
+175
+255
+215
+190
+255
+215
+190
+253
+212
+188
+255
+215
+190
+255
+215
+190
+234
+204
+183
+63
+74
+74
+106
+82
+65
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+194
+112
+58
+56
+64
+60
+97
+98
+96
+56
+64
+60
+188
+112
+56
+227
+126
+50
+224
+123
+55
+227
+126
+50
+224
+123
+55
+89
+75
+66
+63
+74
+74
+217
+187
+166
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+91
+92
+89
+95
+78
+64
+227
+126
+50
+227
+126
+50
+224
+123
+55
+234
+126
+45
+146
+97
+64
+43
+57
+62
+187
+166
+150
+255
+215
+190
+255
+215
+190
+253
+212
+188
+255
+215
+190
+255
+215
+190
+255
+215
+190
+101
+100
+92
+76
+70
+64
+224
+123
+55
+227
+126
+50
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+251
+192
+154
+251
+168
+115
+247
+150
+84
+250
+139
+73
+250
+139
+73
+247
+143
+74
+249
+159
+103
+250
+176
+132
+154
+133
+118
+51
+62
+63
+183
+110
+59
+227
+126
+50
+224
+123
+55
+227
+126
+50
+199
+115
+54
+62
+63
+61
+133
+120
+107
+255
+215
+190
+255
+215
+190
+253
+212
+188
+253
+212
+188
+255
+215
+190
+255
+215
+190
+176
+156
+141
+43
+57
+62
+163
+104
+61
+234
+125
+52
+224
+123
+55
+227
+126
+50
+214
+121
+50
+76
+70
+64
+91
+92
+89
+70
+79
+77
+135
+94
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+234
+125
+52
+146
+97
+64
+35
+56
+60
+161
+144
+134
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+194
+173
+157
+48
+58
+59
+163
+104
+61
+234
+126
+45
+224
+123
+55
+227
+126
+50
+214
+121
+50
+76
+70
+64
+97
+98
+96
+255
+215
+190
+255
+215
+190
+255
+215
+190
+253
+212
+188
+255
+215
+190
+255
+215
+190
+187
+166
+150
+43
+57
+62
+163
+104
+61
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+125
+52
+139
+96
+61
+55
+66
+67
+250
+200
+166
+249
+174
+124
+249
+152
+92
+247
+130
+60
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+109
+10
+247
+111
+26
+247
+123
+41
+248
+138
+64
+249
+159
+103
+248
+180
+134
+124
+111
+99
+35
+31
+30
+137
+110
+49
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+59
+50
+39
+85
+71
+43
+216
+194
+154
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+207
+202
+200
+47
+40
+38
+24
+22
+23
+35
+31
+30
+35
+31
+30
+35
+31
+30
+35
+31
+30
+24
+22
+23
+65
+58
+56
+238
+205
+179
+255
+215
+190
+238
+205
+179
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+100
+89
+56
+63
+74
+74
+227
+196
+175
+255
+215
+190
+253
+204
+176
+250
+200
+166
+250
+200
+166
+251
+209
+178
+255
+215
+190
+194
+173
+157
+48
+58
+59
+123
+102
+54
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+63
+69
+60
+43
+57
+62
+95
+87
+59
+168
+127
+42
+158
+125
+46
+161
+127
+40
+158
+125
+46
+63
+69
+60
+43
+57
+62
+51
+62
+63
+51
+62
+63
+51
+62
+63
+51
+62
+63
+51
+62
+63
+51
+62
+63
+51
+62
+63
+51
+62
+63
+43
+57
+62
+88
+82
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+75
+74
+61
+43
+57
+62
+75
+74
+61
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+117
+98
+55
+51
+62
+63
+217
+187
+166
+255
+215
+190
+253
+204
+176
+250
+200
+166
+250
+200
+166
+253
+204
+176
+255
+215
+190
+217
+187
+166
+48
+58
+59
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+88
+82
+59
+48
+58
+59
+48
+58
+59
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+69
+69
+61
+109
+106
+99
+255
+215
+190
+253
+212
+188
+253
+204
+176
+250
+200
+166
+250
+200
+166
+253
+212
+188
+255
+215
+190
+120
+114
+108
+63
+69
+60
+158
+125
+46
+161
+127
+40
+158
+125
+46
+168
+127
+42
+145
+114
+49
+51
+62
+63
+137
+127
+115
+58
+69
+70
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+63
+69
+60
+120
+114
+108
+70
+79
+77
+105
+93
+60
+171
+129
+45
+158
+125
+46
+168
+127
+42
+152
+119
+47
+56
+64
+60
+51
+62
+63
+51
+62
+63
+51
+62
+63
+51
+62
+63
+51
+62
+63
+51
+62
+63
+51
+62
+63
+51
+62
+63
+51
+62
+63
+43
+57
+62
+111
+94
+57
+171
+129
+45
+158
+125
+46
+161
+127
+40
+152
+119
+47
+62
+63
+61
+146
+135
+124
+172
+150
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+227
+126
+50
+199
+115
+54
+62
+63
+61
+146
+135
+124
+255
+215
+190
+253
+212
+188
+250
+200
+166
+250
+200
+166
+253
+204
+176
+253
+212
+188
+253
+212
+188
+97
+98
+96
+89
+75
+66
+227
+126
+50
+227
+126
+50
+224
+123
+55
+234
+126
+45
+139
+96
+61
+51
+62
+63
+63
+74
+74
+89
+75
+66
+227
+126
+50
+227
+126
+50
+224
+123
+55
+234
+125
+52
+135
+94
+64
+55
+66
+67
+217
+187
+166
+255
+215
+190
+253
+204
+176
+250
+200
+166
+250
+200
+166
+253
+204
+176
+255
+215
+190
+217
+187
+166
+51
+62
+63
+139
+96
+61
+234
+126
+45
+224
+123
+55
+227
+126
+50
+225
+124
+48
+81
+73
+62
+58
+69
+70
+51
+62
+63
+146
+97
+64
+234
+126
+45
+224
+123
+55
+227
+126
+50
+224
+123
+55
+81
+73
+62
+109
+106
+99
+255
+215
+190
+253
+212
+188
+253
+204
+176
+250
+200
+166
+250
+200
+166
+253
+212
+188
+255
+215
+190
+120
+114
+108
+69
+69
+61
+212
+120
+56
+227
+126
+50
+224
+123
+55
+227
+126
+50
+194
+112
+58
+56
+64
+60
+101
+100
+92
+56
+64
+60
+188
+112
+56
+234
+125
+52
+224
+123
+55
+227
+126
+50
+194
+112
+58
+51
+62
+63
+146
+135
+124
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+234
+204
+183
+70
+79
+77
+118
+86
+65
+234
+125
+52
+224
+123
+55
+227
+126
+50
+227
+126
+50
+106
+82
+65
+77
+85
+81
+245
+212
+186
+255
+215
+190
+253
+204
+176
+250
+200
+166
+250
+200
+166
+251
+209
+178
+255
+215
+190
+176
+156
+141
+56
+64
+60
+188
+112
+56
+234
+125
+52
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+251
+192
+154
+251
+168
+115
+249
+152
+92
+247
+143
+74
+247
+143
+74
+247
+150
+84
+249
+159
+103
+248
+180
+134
+120
+114
+108
+69
+69
+61
+212
+120
+56
+227
+126
+50
+224
+123
+55
+234
+125
+52
+155
+100
+63
+43
+57
+62
+194
+173
+157
+255
+215
+190
+253
+204
+176
+250
+200
+166
+250
+200
+166
+253
+204
+176
+255
+215
+190
+234
+204
+183
+63
+74
+74
+112
+85
+63
+234
+125
+52
+227
+126
+50
+224
+123
+55
+234
+125
+52
+106
+82
+65
+58
+69
+70
+55
+66
+67
+135
+94
+64
+234
+125
+52
+224
+123
+55
+227
+126
+50
+227
+126
+50
+95
+78
+64
+77
+85
+81
+245
+212
+186
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+161
+144
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+227
+126
+50
+183
+110
+59
+48
+58
+59
+172
+150
+134
+255
+215
+190
+251
+209
+178
+250
+200
+166
+250
+200
+166
+253
+204
+176
+255
+215
+190
+245
+212
+186
+63
+74
+74
+112
+85
+63
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+126
+45
+139
+96
+61
+55
+66
+67
+250
+200
+166
+249
+174
+124
+249
+152
+92
+247
+130
+60
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+123
+41
+250
+139
+73
+249
+159
+103
+252
+185
+144
+82
+69
+65
+47
+40
+38
+158
+125
+46
+161
+127
+40
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+85
+71
+43
+59
+50
+39
+216
+194
+154
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+164
+158
+157
+47
+40
+38
+24
+22
+23
+24
+22
+23
+24
+22
+23
+35
+31
+30
+65
+67
+64
+65
+58
+56
+227
+196
+175
+255
+215
+190
+238
+205
+179
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+88
+82
+59
+84
+85
+82
+255
+215
+190
+251
+209
+178
+250
+197
+158
+251
+192
+154
+251
+192
+154
+250
+200
+166
+253
+212
+188
+227
+196
+175
+58
+69
+70
+105
+93
+60
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+75
+74
+61
+41
+58
+57
+111
+94
+57
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+123
+102
+54
+123
+102
+54
+123
+102
+54
+123
+102
+54
+123
+102
+54
+123
+102
+54
+123
+102
+54
+123
+102
+54
+123
+102
+54
+123
+102
+54
+123
+102
+54
+137
+110
+49
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+41
+58
+57
+83
+78
+61
+168
+127
+42
+158
+125
+46
+158
+125
+46
+171
+129
+45
+95
+87
+59
+70
+79
+77
+245
+212
+186
+253
+212
+188
+250
+200
+166
+251
+192
+154
+251
+192
+154
+250
+200
+166
+253
+212
+188
+238
+205
+179
+70
+79
+77
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+88
+82
+59
+48
+58
+59
+48
+58
+59
+129
+106
+52
+168
+127
+42
+158
+125
+46
+168
+127
+42
+152
+119
+47
+56
+64
+60
+146
+135
+124
+255
+215
+190
+253
+204
+176
+250
+197
+158
+251
+192
+154
+251
+192
+154
+253
+204
+176
+255
+215
+190
+172
+150
+134
+51
+62
+63
+145
+114
+49
+168
+127
+42
+158
+125
+46
+168
+127
+42
+145
+114
+49
+51
+62
+63
+137
+127
+115
+58
+69
+70
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+63
+69
+60
+97
+98
+96
+55
+66
+67
+123
+102
+54
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+123
+102
+54
+123
+102
+54
+123
+102
+54
+123
+102
+54
+123
+102
+54
+123
+102
+54
+123
+102
+54
+123
+102
+54
+123
+102
+54
+123
+102
+54
+117
+98
+55
+145
+114
+49
+161
+127
+40
+158
+125
+46
+158
+125
+46
+158
+125
+46
+69
+69
+61
+137
+127
+115
+172
+150
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+234
+125
+52
+183
+110
+59
+51
+62
+63
+187
+166
+150
+255
+215
+190
+253
+204
+176
+251
+192
+154
+251
+192
+154
+250
+197
+158
+253
+204
+176
+255
+215
+190
+137
+127
+115
+65
+67
+64
+209
+117
+53
+227
+126
+50
+224
+123
+55
+234
+125
+52
+163
+104
+61
+43
+57
+62
+41
+58
+57
+106
+82
+65
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+125
+52
+106
+82
+65
+77
+85
+81
+245
+212
+186
+251
+209
+178
+250
+197
+158
+249
+189
+146
+251
+192
+154
+250
+197
+158
+251
+209
+178
+238
+205
+179
+77
+85
+81
+112
+85
+63
+234
+126
+45
+224
+123
+55
+224
+123
+55
+227
+126
+50
+106
+82
+65
+41
+58
+57
+48
+58
+59
+163
+104
+61
+234
+125
+52
+224
+123
+55
+227
+126
+50
+209
+117
+53
+62
+63
+61
+146
+135
+124
+255
+215
+190
+253
+204
+176
+250
+197
+158
+251
+192
+154
+251
+192
+154
+253
+204
+176
+255
+215
+190
+176
+156
+141
+56
+64
+60
+188
+112
+56
+227
+126
+50
+224
+123
+55
+227
+126
+50
+194
+112
+58
+56
+64
+60
+101
+100
+92
+56
+64
+60
+188
+112
+56
+234
+125
+52
+224
+123
+55
+227
+126
+50
+183
+110
+59
+48
+58
+59
+176
+156
+141
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+227
+196
+175
+58
+69
+70
+139
+96
+61
+234
+125
+52
+224
+123
+55
+227
+126
+50
+214
+121
+50
+76
+70
+64
+120
+114
+108
+255
+215
+190
+253
+204
+176
+250
+197
+158
+251
+192
+154
+251
+192
+154
+250
+200
+166
+255
+215
+190
+207
+178
+158
+48
+58
+59
+163
+104
+61
+234
+125
+52
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+251
+192
+154
+249
+174
+124
+246
+156
+93
+247
+150
+84
+249
+146
+83
+249
+152
+92
+251
+168
+115
+249
+189
+146
+97
+98
+96
+89
+75
+66
+225
+124
+48
+227
+126
+50
+224
+123
+55
+234
+126
+45
+125
+90
+64
+58
+69
+70
+227
+196
+175
+253
+212
+188
+250
+200
+166
+251
+192
+154
+249
+189
+146
+250
+197
+158
+251
+209
+178
+255
+215
+190
+97
+98
+96
+89
+75
+66
+227
+126
+50
+227
+126
+50
+224
+123
+55
+234
+126
+45
+125
+90
+64
+43
+57
+62
+43
+57
+62
+135
+94
+64
+234
+125
+52
+224
+123
+55
+227
+126
+50
+227
+126
+50
+89
+75
+66
+101
+100
+92
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+137
+127
+115
+69
+69
+61
+212
+120
+56
+227
+126
+50
+224
+123
+55
+234
+126
+45
+155
+100
+63
+43
+57
+62
+207
+178
+158
+255
+215
+190
+250
+200
+166
+251
+192
+154
+251
+192
+154
+250
+197
+158
+251
+209
+178
+255
+215
+190
+109
+106
+99
+89
+75
+66
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+126
+45
+139
+96
+61
+55
+66
+67
+250
+200
+166
+249
+174
+124
+249
+152
+92
+247
+130
+60
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+123
+41
+247
+143
+74
+249
+159
+103
+252
+185
+144
+55
+48
+48
+59
+50
+39
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+156
+125
+62
+101
+83
+47
+59
+50
+39
+209
+171
+139
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+219
+212
+208
+137
+127
+115
+101
+100
+92
+120
+114
+108
+186
+181
+179
+152
+147
+147
+55
+48
+48
+227
+196
+175
+255
+215
+190
+238
+205
+179
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+97
+98
+96
+255
+215
+190
+253
+204
+176
+251
+192
+154
+249
+189
+146
+249
+189
+146
+250
+197
+158
+251
+209
+178
+234
+204
+183
+70
+79
+77
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+161
+127
+40
+75
+74
+61
+41
+58
+57
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+168
+127
+42
+168
+127
+42
+168
+127
+42
+171
+129
+45
+75
+74
+61
+41
+58
+57
+88
+82
+59
+168
+127
+42
+158
+125
+46
+158
+125
+46
+171
+129
+45
+88
+82
+59
+77
+85
+81
+245
+212
+186
+251
+209
+178
+250
+197
+158
+249
+189
+146
+249
+189
+146
+250
+197
+158
+251
+209
+178
+245
+212
+186
+84
+85
+82
+88
+82
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+88
+82
+59
+43
+57
+62
+48
+58
+59
+129
+106
+52
+168
+127
+42
+158
+125
+46
+168
+127
+42
+145
+114
+49
+56
+64
+60
+161
+144
+134
+255
+215
+190
+250
+200
+166
+251
+192
+154
+249
+189
+146
+251
+192
+154
+250
+200
+166
+255
+215
+190
+187
+166
+150
+51
+62
+63
+137
+110
+49
+168
+127
+42
+158
+125
+46
+168
+127
+42
+145
+114
+49
+51
+62
+63
+137
+127
+115
+58
+69
+70
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+65
+67
+64
+91
+92
+89
+55
+66
+67
+129
+106
+52
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+171
+129
+45
+168
+127
+42
+168
+127
+42
+168
+127
+42
+158
+125
+46
+63
+69
+60
+137
+127
+115
+172
+150
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+227
+126
+50
+173
+106
+60
+48
+58
+59
+187
+166
+150
+255
+215
+190
+250
+200
+166
+251
+192
+154
+249
+189
+146
+251
+192
+154
+250
+200
+166
+255
+215
+190
+161
+144
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+234
+125
+52
+173
+106
+60
+48
+58
+59
+41
+58
+57
+118
+86
+65
+234
+126
+45
+224
+123
+55
+224
+123
+55
+234
+125
+52
+95
+78
+64
+91
+92
+89
+255
+215
+190
+253
+204
+176
+251
+192
+154
+252
+185
+144
+252
+185
+144
+251
+192
+154
+253
+204
+176
+245
+212
+186
+91
+92
+89
+106
+82
+65
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+125
+52
+112
+85
+63
+41
+58
+57
+48
+58
+59
+173
+106
+60
+234
+125
+52
+224
+123
+55
+227
+126
+50
+199
+115
+54
+56
+64
+60
+161
+144
+134
+255
+215
+190
+250
+200
+166
+251
+192
+154
+249
+189
+146
+251
+192
+154
+250
+200
+166
+255
+215
+190
+187
+166
+150
+48
+58
+59
+183
+110
+59
+234
+125
+52
+224
+123
+55
+227
+126
+50
+194
+112
+58
+56
+64
+60
+101
+100
+92
+56
+64
+60
+188
+112
+56
+227
+126
+50
+224
+123
+55
+227
+126
+50
+183
+110
+59
+51
+62
+63
+176
+156
+141
+255
+215
+190
+253
+212
+188
+251
+209
+178
+253
+212
+188
+217
+187
+166
+55
+66
+67
+146
+97
+64
+234
+126
+45
+224
+123
+55
+227
+126
+50
+214
+121
+50
+69
+69
+61
+137
+127
+115
+255
+215
+190
+253
+204
+176
+251
+192
+154
+249
+189
+146
+249
+189
+146
+250
+200
+166
+253
+212
+188
+217
+187
+166
+51
+62
+63
+155
+100
+63
+234
+125
+52
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+250
+197
+158
+249
+174
+124
+249
+159
+103
+249
+152
+92
+249
+152
+92
+249
+159
+103
+249
+174
+124
+250
+197
+158
+91
+92
+89
+95
+78
+64
+227
+126
+50
+227
+126
+50
+224
+123
+55
+234
+125
+52
+125
+90
+64
+70
+79
+77
+234
+204
+183
+251
+209
+178
+250
+197
+158
+249
+189
+146
+252
+185
+144
+251
+192
+154
+253
+204
+176
+255
+215
+190
+120
+114
+108
+81
+73
+62
+224
+123
+55
+227
+126
+50
+224
+123
+55
+234
+126
+45
+135
+94
+64
+41
+58
+57
+41
+58
+57
+135
+94
+64
+234
+125
+52
+224
+123
+55
+227
+126
+50
+227
+126
+50
+89
+75
+66
+101
+100
+92
+253
+212
+188
+253
+212
+188
+251
+209
+178
+251
+209
+178
+255
+215
+190
+137
+127
+115
+76
+70
+64
+214
+121
+50
+227
+126
+50
+224
+123
+55
+234
+125
+52
+146
+97
+64
+51
+62
+63
+227
+196
+175
+253
+212
+188
+250
+197
+158
+249
+189
+146
+249
+189
+146
+251
+192
+154
+253
+204
+176
+255
+215
+190
+120
+114
+108
+81
+73
+62
+227
+126
+50
+227
+126
+50
+224
+123
+55
+234
+126
+45
+139
+96
+61
+51
+62
+63
+250
+200
+166
+249
+174
+124
+249
+152
+92
+247
+130
+60
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+123
+41
+250
+139
+73
+249
+159
+103
+252
+185
+144
+55
+48
+48
+59
+50
+39
+161
+127
+40
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+154
+125
+71
+170
+137
+67
+108
+87
+46
+59
+50
+39
+192
+155
+91
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+186
+181
+179
+47
+40
+38
+65
+58
+56
+245
+212
+186
+255
+215
+190
+238
+205
+179
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+88
+82
+59
+84
+85
+82
+253
+212
+188
+251
+209
+178
+250
+197
+158
+251
+192
+154
+251
+192
+154
+250
+200
+166
+253
+212
+188
+234
+204
+183
+63
+74
+74
+100
+89
+56
+171
+129
+45
+158
+125
+46
+158
+125
+46
+161
+127
+40
+75
+74
+61
+41
+58
+57
+111
+94
+57
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+111
+94
+57
+56
+64
+60
+43
+57
+62
+83
+78
+61
+168
+127
+42
+158
+125
+46
+158
+125
+46
+171
+129
+45
+95
+87
+59
+70
+79
+77
+245
+212
+186
+251
+209
+178
+250
+197
+158
+251
+192
+154
+251
+192
+154
+250
+197
+158
+251
+209
+178
+245
+212
+186
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+88
+82
+59
+43
+57
+62
+48
+58
+59
+129
+106
+52
+168
+127
+42
+158
+125
+46
+158
+125
+46
+152
+119
+47
+56
+64
+60
+161
+144
+134
+255
+215
+190
+253
+204
+176
+251
+192
+154
+249
+189
+146
+251
+192
+154
+250
+200
+166
+255
+215
+190
+176
+156
+141
+51
+62
+63
+137
+110
+49
+168
+127
+42
+158
+125
+46
+168
+127
+42
+145
+114
+49
+51
+62
+63
+137
+127
+115
+58
+69
+70
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+63
+69
+60
+91
+92
+89
+55
+66
+67
+123
+102
+54
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+145
+114
+49
+100
+89
+56
+48
+58
+59
+187
+166
+150
+176
+156
+141
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+227
+126
+50
+183
+110
+59
+51
+62
+63
+176
+156
+141
+255
+215
+190
+250
+200
+166
+251
+192
+154
+251
+192
+154
+250
+197
+158
+253
+204
+176
+255
+215
+190
+146
+135
+124
+62
+63
+61
+209
+117
+53
+227
+126
+50
+224
+123
+55
+234
+125
+52
+163
+104
+61
+48
+58
+59
+41
+58
+57
+112
+85
+63
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+125
+52
+106
+82
+65
+84
+85
+82
+255
+215
+190
+251
+209
+178
+250
+197
+158
+249
+189
+146
+249
+189
+146
+250
+197
+158
+251
+209
+178
+238
+205
+179
+84
+85
+82
+106
+82
+65
+234
+125
+52
+224
+123
+55
+227
+126
+50
+227
+126
+50
+106
+82
+65
+41
+58
+57
+48
+58
+59
+173
+106
+60
+227
+126
+50
+224
+123
+55
+227
+126
+50
+199
+115
+54
+62
+63
+61
+146
+135
+124
+255
+215
+190
+253
+204
+176
+251
+192
+154
+249
+189
+146
+251
+192
+154
+250
+200
+166
+255
+215
+190
+176
+156
+141
+51
+62
+63
+183
+110
+59
+227
+126
+50
+224
+123
+55
+227
+126
+50
+194
+112
+58
+56
+64
+60
+101
+100
+92
+56
+64
+60
+188
+112
+56
+227
+126
+50
+224
+123
+55
+227
+126
+50
+183
+110
+59
+51
+62
+63
+176
+156
+141
+253
+212
+188
+253
+204
+176
+250
+200
+166
+253
+204
+176
+217
+187
+166
+55
+66
+67
+146
+97
+64
+234
+125
+52
+224
+123
+55
+227
+126
+50
+214
+121
+50
+76
+70
+64
+120
+114
+108
+255
+215
+190
+253
+204
+176
+250
+197
+158
+251
+192
+154
+251
+192
+154
+250
+200
+166
+253
+212
+188
+207
+178
+158
+48
+58
+59
+163
+104
+61
+227
+126
+50
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+250
+200
+166
+248
+180
+134
+251
+168
+115
+247
+165
+111
+247
+165
+111
+251
+168
+115
+248
+180
+134
+250
+200
+166
+91
+92
+89
+89
+75
+66
+225
+124
+48
+227
+126
+50
+224
+123
+55
+234
+126
+45
+125
+90
+64
+63
+74
+74
+227
+196
+175
+251
+209
+178
+250
+197
+158
+249
+189
+146
+249
+189
+146
+250
+197
+158
+253
+204
+176
+255
+215
+190
+109
+106
+99
+89
+75
+66
+225
+124
+48
+227
+126
+50
+224
+123
+55
+234
+125
+52
+125
+90
+64
+43
+57
+62
+41
+58
+57
+135
+94
+64
+234
+126
+45
+224
+123
+55
+227
+126
+50
+227
+126
+50
+89
+75
+66
+101
+100
+92
+253
+212
+188
+253
+204
+176
+250
+200
+166
+250
+200
+166
+251
+209
+178
+137
+127
+115
+76
+70
+64
+214
+121
+50
+227
+126
+50
+224
+123
+55
+234
+125
+52
+155
+100
+63
+43
+57
+62
+217
+187
+166
+253
+212
+188
+250
+200
+166
+251
+192
+154
+249
+189
+146
+250
+197
+158
+253
+204
+176
+255
+215
+190
+120
+114
+108
+81
+73
+62
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+125
+52
+139
+96
+61
+55
+66
+67
+250
+200
+166
+249
+174
+124
+249
+152
+92
+247
+130
+60
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+123
+41
+250
+139
+73
+249
+159
+103
+248
+180
+134
+76
+70
+64
+47
+40
+38
+152
+119
+47
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+156
+125
+62
+154
+125
+71
+170
+137
+67
+101
+83
+47
+59
+50
+39
+170
+137
+67
+255
+238
+227
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+152
+147
+147
+35
+31
+30
+24
+22
+23
+115
+102
+92
+255
+215
+190
+255
+215
+190
+238
+205
+179
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+171
+129
+45
+105
+93
+60
+58
+69
+70
+227
+196
+175
+255
+215
+190
+253
+204
+176
+250
+200
+166
+250
+200
+166
+253
+204
+176
+255
+215
+190
+207
+178
+158
+48
+58
+59
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+69
+69
+61
+43
+57
+62
+100
+89
+56
+171
+129
+45
+158
+125
+46
+161
+127
+40
+158
+125
+46
+75
+74
+61
+48
+58
+59
+56
+64
+60
+56
+64
+60
+56
+64
+60
+56
+64
+60
+56
+64
+60
+56
+64
+60
+56
+64
+60
+56
+64
+60
+56
+64
+60
+56
+64
+60
+56
+64
+60
+56
+64
+60
+56
+64
+60
+48
+58
+59
+101
+100
+92
+91
+92
+89
+75
+74
+61
+168
+127
+42
+158
+125
+46
+158
+125
+46
+171
+129
+45
+111
+94
+57
+55
+66
+67
+227
+196
+175
+255
+215
+190
+253
+204
+176
+250
+200
+166
+250
+200
+166
+253
+204
+176
+255
+215
+190
+227
+196
+175
+51
+62
+63
+105
+93
+60
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+48
+58
+59
+48
+58
+59
+123
+102
+54
+168
+127
+42
+158
+125
+46
+161
+127
+40
+158
+125
+46
+69
+69
+61
+120
+114
+108
+255
+215
+190
+251
+209
+178
+250
+200
+166
+250
+197
+158
+250
+200
+166
+251
+209
+178
+255
+215
+190
+146
+135
+124
+56
+64
+60
+152
+119
+47
+168
+127
+42
+158
+125
+46
+168
+127
+42
+145
+114
+49
+51
+62
+63
+137
+127
+115
+58
+69
+70
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+63
+69
+60
+109
+106
+99
+63
+74
+74
+111
+94
+57
+171
+129
+45
+158
+125
+46
+161
+127
+40
+152
+119
+47
+69
+69
+61
+51
+62
+63
+56
+64
+60
+56
+64
+60
+56
+64
+60
+56
+64
+60
+56
+64
+60
+56
+64
+60
+56
+64
+60
+56
+64
+60
+56
+64
+60
+56
+64
+60
+56
+64
+60
+56
+64
+60
+51
+62
+63
+48
+58
+59
+120
+114
+108
+245
+212
+186
+172
+150
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+227
+126
+50
+209
+117
+53
+62
+63
+61
+137
+127
+115
+255
+215
+190
+251
+209
+178
+250
+200
+166
+250
+200
+166
+250
+200
+166
+253
+212
+188
+255
+215
+190
+109
+106
+99
+81
+73
+62
+224
+123
+55
+227
+126
+50
+224
+123
+55
+234
+125
+52
+155
+100
+63
+48
+58
+59
+43
+57
+62
+95
+78
+64
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+125
+52
+125
+90
+64
+63
+74
+74
+227
+196
+175
+253
+212
+188
+250
+200
+166
+250
+197
+158
+250
+197
+158
+253
+204
+176
+255
+215
+190
+227
+196
+175
+55
+66
+67
+125
+90
+64
+234
+125
+52
+224
+123
+55
+224
+123
+55
+227
+126
+50
+89
+75
+66
+48
+58
+59
+48
+58
+59
+155
+100
+63
+234
+126
+45
+224
+123
+55
+227
+126
+50
+214
+121
+50
+76
+70
+64
+120
+114
+108
+255
+215
+190
+251
+209
+178
+250
+200
+166
+250
+197
+158
+250
+200
+166
+251
+209
+178
+255
+215
+190
+137
+127
+115
+62
+63
+61
+209
+117
+53
+227
+126
+50
+224
+123
+55
+227
+126
+50
+194
+112
+58
+56
+64
+60
+97
+98
+96
+56
+64
+60
+188
+112
+56
+227
+126
+50
+224
+123
+55
+227
+126
+50
+183
+110
+59
+48
+58
+59
+176
+156
+141
+251
+209
+178
+250
+200
+166
+250
+197
+158
+250
+200
+166
+227
+196
+175
+63
+74
+74
+135
+94
+64
+234
+126
+45
+224
+123
+55
+227
+126
+50
+227
+126
+50
+95
+78
+64
+91
+92
+89
+253
+212
+188
+253
+212
+188
+250
+200
+166
+250
+200
+166
+250
+200
+166
+251
+209
+178
+255
+215
+190
+172
+150
+134
+56
+64
+60
+188
+112
+56
+227
+126
+50
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+251
+209
+178
+251
+192
+154
+250
+176
+132
+249
+174
+124
+249
+174
+124
+248
+180
+134
+251
+192
+154
+251
+209
+178
+109
+106
+99
+76
+70
+64
+214
+121
+50
+227
+126
+50
+224
+123
+55
+234
+126
+45
+146
+97
+64
+43
+57
+62
+217
+187
+166
+255
+215
+190
+253
+204
+176
+250
+197
+158
+250
+197
+158
+250
+200
+166
+253
+212
+188
+245
+212
+186
+70
+79
+77
+106
+82
+65
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+125
+52
+112
+85
+63
+51
+62
+63
+51
+62
+63
+135
+94
+64
+234
+126
+45
+224
+123
+55
+227
+126
+50
+227
+126
+50
+89
+75
+66
+101
+100
+92
+245
+212
+186
+250
+200
+166
+251
+192
+154
+250
+197
+158
+253
+204
+176
+146
+135
+124
+65
+67
+64
+209
+117
+53
+227
+126
+50
+224
+123
+55
+234
+125
+52
+173
+106
+60
+48
+58
+59
+187
+166
+150
+255
+215
+190
+253
+204
+176
+250
+200
+166
+250
+197
+158
+250
+200
+166
+253
+212
+188
+255
+215
+190
+84
+85
+82
+95
+78
+64
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+125
+52
+139
+96
+61
+55
+66
+67
+250
+200
+166
+249
+174
+124
+249
+152
+92
+247
+130
+60
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+109
+10
+247
+111
+26
+247
+123
+41
+248
+138
+64
+249
+152
+92
+249
+174
+124
+121
+100
+85
+35
+31
+30
+108
+87
+46
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+156
+125
+62
+154
+125
+71
+154
+125
+71
+171
+129
+45
+85
+71
+43
+71
+60
+43
+171
+129
+45
+224
+207
+180
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+237
+233
+225
+174
+168
+167
+81
+77
+76
+24
+22
+23
+35
+31
+30
+35
+31
+30
+187
+166
+150
+255
+215
+190
+255
+215
+190
+234
+204
+183
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+129
+106
+52
+51
+62
+63
+176
+156
+141
+255
+215
+190
+255
+215
+190
+253
+212
+188
+253
+212
+188
+255
+215
+190
+255
+215
+190
+146
+135
+124
+51
+62
+63
+145
+114
+49
+168
+127
+42
+158
+125
+46
+158
+125
+46
+152
+119
+47
+56
+64
+60
+43
+57
+62
+83
+78
+61
+168
+127
+42
+158
+125
+46
+158
+125
+46
+168
+127
+42
+88
+82
+59
+48
+58
+59
+146
+135
+124
+161
+144
+134
+161
+144
+134
+161
+144
+134
+161
+144
+134
+161
+144
+134
+161
+144
+134
+161
+144
+134
+161
+144
+134
+172
+150
+134
+172
+150
+134
+146
+135
+124
+146
+135
+124
+194
+173
+157
+245
+212
+186
+137
+127
+115
+63
+69
+60
+158
+125
+46
+161
+127
+40
+158
+125
+46
+168
+127
+42
+137
+110
+49
+51
+62
+63
+161
+144
+134
+255
+215
+190
+255
+215
+190
+253
+212
+188
+253
+212
+188
+255
+215
+190
+255
+215
+190
+161
+144
+134
+48
+58
+59
+137
+110
+49
+168
+127
+42
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+55
+66
+67
+51
+62
+63
+105
+93
+60
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+88
+82
+59
+70
+79
+77
+245
+212
+186
+255
+215
+190
+253
+212
+188
+251
+209
+178
+253
+212
+188
+255
+215
+190
+255
+215
+190
+91
+92
+89
+75
+74
+61
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+145
+114
+49
+51
+62
+63
+137
+127
+115
+58
+69
+70
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+63
+69
+60
+133
+120
+107
+84
+85
+82
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+75
+74
+61
+55
+66
+67
+161
+144
+134
+161
+144
+134
+161
+144
+134
+161
+144
+134
+161
+144
+134
+161
+144
+134
+161
+144
+134
+161
+144
+134
+161
+144
+134
+172
+150
+134
+172
+150
+134
+137
+127
+115
+146
+135
+124
+207
+178
+158
+245
+212
+186
+255
+215
+190
+161
+144
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+227
+126
+50
+227
+126
+50
+89
+75
+66
+76
+78
+76
+245
+212
+186
+255
+215
+190
+253
+212
+188
+253
+212
+188
+253
+212
+188
+255
+215
+190
+227
+196
+175
+58
+69
+70
+118
+86
+65
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+125
+52
+125
+90
+64
+63
+74
+74
+97
+98
+96
+76
+70
+64
+214
+121
+50
+227
+126
+50
+224
+123
+55
+234
+125
+52
+163
+104
+61
+48
+58
+59
+187
+166
+150
+255
+215
+190
+255
+215
+190
+251
+209
+178
+251
+209
+178
+255
+215
+190
+255
+215
+190
+176
+156
+141
+48
+58
+59
+173
+106
+60
+227
+126
+50
+224
+123
+55
+227
+126
+50
+212
+120
+56
+69
+69
+61
+101
+100
+92
+63
+74
+74
+125
+90
+64
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+125
+52
+106
+82
+65
+63
+74
+74
+234
+204
+183
+255
+215
+190
+253
+212
+188
+253
+212
+188
+253
+212
+188
+255
+215
+190
+245
+212
+186
+70
+79
+77
+89
+75
+66
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+194
+112
+58
+56
+64
+60
+101
+100
+92
+56
+64
+60
+188
+112
+56
+227
+126
+50
+224
+123
+55
+234
+125
+52
+183
+110
+59
+51
+62
+63
+176
+156
+141
+253
+204
+176
+251
+192
+154
+251
+192
+154
+251
+192
+154
+250
+200
+166
+77
+85
+81
+106
+82
+65
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+126
+45
+135
+94
+64
+51
+62
+63
+217
+187
+166
+255
+215
+190
+255
+215
+190
+253
+212
+188
+253
+212
+188
+255
+215
+190
+255
+215
+190
+109
+106
+99
+76
+70
+64
+224
+123
+55
+227
+126
+50
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+255
+215
+190
+250
+200
+166
+251
+192
+154
+252
+185
+144
+252
+185
+144
+251
+192
+154
+250
+200
+166
+255
+215
+190
+146
+135
+124
+56
+64
+60
+199
+115
+54
+227
+126
+50
+224
+123
+55
+227
+126
+50
+194
+112
+58
+51
+62
+63
+146
+135
+124
+255
+215
+190
+255
+215
+190
+251
+209
+178
+251
+209
+178
+253
+212
+188
+255
+215
+190
+194
+173
+157
+43
+57
+62
+146
+97
+64
+234
+126
+45
+224
+123
+55
+227
+126
+50
+227
+126
+50
+89
+75
+66
+77
+85
+81
+63
+74
+74
+135
+94
+64
+234
+125
+52
+224
+123
+55
+227
+126
+50
+227
+126
+50
+89
+75
+66
+101
+100
+92
+251
+209
+178
+250
+197
+158
+249
+189
+146
+249
+189
+146
+250
+200
+166
+172
+150
+134
+56
+64
+60
+188
+112
+56
+227
+126
+50
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+120
+114
+108
+255
+215
+190
+255
+215
+190
+253
+212
+188
+251
+209
+178
+253
+212
+188
+255
+215
+190
+217
+187
+166
+51
+62
+63
+135
+94
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+234
+126
+45
+139
+96
+61
+55
+66
+67
+250
+200
+166
+249
+174
+124
+249
+152
+92
+247
+130
+60
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+111
+26
+247
+118
+39
+247
+130
+60
+247
+150
+84
+251
+168
+115
+187
+140
+108
+24
+22
+23
+59
+50
+39
+168
+127
+42
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+156
+125
+62
+154
+125
+71
+154
+125
+71
+154
+125
+71
+156
+125
+62
+158
+125
+46
+47
+40
+38
+108
+87
+46
+158
+125
+46
+195
+167
+113
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+219
+212
+208
+164
+158
+157
+109
+106
+99
+65
+58
+56
+24
+22
+23
+24
+22
+23
+94
+60
+47
+178
+86
+46
+59
+50
+39
+150
+125
+114
+255
+215
+190
+255
+215
+190
+234
+204
+183
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+69
+69
+61
+84
+85
+82
+234
+204
+183
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+217
+187
+166
+55
+66
+67
+83
+78
+61
+168
+127
+42
+158
+125
+46
+158
+125
+46
+171
+129
+45
+123
+102
+54
+51
+62
+63
+76
+78
+76
+56
+64
+60
+152
+119
+47
+168
+127
+42
+158
+125
+46
+168
+127
+42
+129
+106
+52
+48
+58
+59
+161
+144
+134
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+217
+187
+166
+133
+120
+107
+77
+85
+81
+77
+85
+81
+146
+135
+124
+245
+212
+186
+176
+156
+141
+51
+62
+63
+137
+110
+49
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+75
+74
+61
+63
+74
+74
+227
+196
+175
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+234
+204
+183
+76
+78
+76
+75
+74
+61
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+88
+82
+59
+77
+85
+81
+77
+85
+81
+88
+82
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+129
+106
+52
+48
+58
+59
+146
+135
+124
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+172
+150
+134
+48
+58
+59
+117
+98
+55
+168
+127
+42
+158
+125
+46
+158
+125
+46
+168
+127
+42
+145
+114
+49
+51
+62
+63
+137
+127
+115
+58
+69
+70
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+63
+69
+60
+146
+135
+124
+120
+114
+108
+69
+69
+61
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+111
+94
+57
+51
+62
+63
+176
+156
+141
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+194
+173
+157
+120
+114
+108
+70
+79
+77
+84
+85
+82
+161
+144
+134
+255
+215
+190
+255
+215
+190
+161
+144
+134
+56
+64
+60
+199
+115
+54
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+126
+45
+155
+100
+63
+41
+58
+57
+161
+144
+134
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+137
+127
+115
+48
+58
+59
+183
+110
+59
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+89
+75
+66
+97
+98
+96
+172
+150
+134
+48
+58
+59
+183
+110
+59
+227
+126
+50
+224
+123
+55
+227
+126
+50
+214
+121
+50
+76
+70
+64
+84
+85
+82
+234
+204
+183
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+234
+204
+183
+77
+85
+81
+81
+73
+62
+224
+123
+55
+227
+126
+50
+224
+123
+55
+234
+125
+52
+173
+106
+60
+48
+58
+59
+176
+156
+141
+97
+98
+96
+95
+78
+64
+227
+126
+50
+227
+126
+50
+224
+123
+55
+234
+125
+52
+173
+106
+60
+48
+58
+59
+146
+135
+124
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+161
+144
+134
+41
+58
+57
+155
+100
+63
+234
+126
+45
+224
+123
+55
+224
+123
+55
+227
+126
+50
+194
+112
+58
+56
+64
+60
+101
+100
+92
+56
+64
+60
+188
+112
+56
+227
+126
+50
+224
+123
+55
+227
+126
+50
+183
+110
+59
+51
+62
+63
+176
+156
+141
+250
+200
+166
+249
+189
+146
+252
+185
+144
+249
+189
+146
+250
+200
+166
+120
+114
+108
+69
+69
+61
+214
+121
+50
+227
+126
+50
+224
+123
+55
+227
+126
+50
+199
+115
+54
+62
+63
+61
+101
+100
+92
+245
+212
+186
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+187
+166
+150
+43
+57
+62
+135
+94
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+255
+215
+190
+253
+212
+188
+253
+204
+176
+250
+200
+166
+250
+200
+166
+253
+204
+176
+253
+212
+188
+255
+215
+190
+187
+166
+150
+41
+58
+57
+155
+100
+63
+234
+125
+52
+224
+123
+55
+227
+126
+50
+227
+126
+50
+95
+78
+64
+58
+69
+70
+227
+196
+175
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+245
+212
+186
+91
+92
+89
+62
+63
+61
+209
+117
+53
+227
+126
+50
+224
+123
+55
+227
+126
+50
+199
+115
+54
+62
+63
+61
+133
+120
+107
+77
+85
+81
+135
+94
+64
+234
+126
+45
+224
+123
+55
+227
+126
+50
+227
+126
+50
+89
+75
+66
+101
+100
+92
+253
+204
+176
+251
+192
+154
+252
+185
+144
+252
+185
+144
+251
+192
+154
+212
+173
+150
+48
+58
+59
+155
+100
+63
+234
+126
+45
+224
+123
+55
+224
+123
+55
+234
+125
+52
+118
+86
+65
+51
+62
+63
+207
+178
+158
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+109
+106
+99
+56
+64
+60
+199
+115
+54
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+125
+52
+139
+96
+61
+55
+66
+67
+250
+200
+166
+249
+174
+124
+249
+152
+92
+247
+130
+60
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+247
+111
+26
+246
+116
+28
+247
+130
+53
+247
+143
+74
+249
+159
+103
+248
+180
+134
+89
+75
+66
+24
+22
+23
+85
+71
+43
+171
+129
+45
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+156
+125
+62
+154
+125
+71
+154
+125
+71
+154
+125
+71
+156
+125
+62
+175
+132
+40
+85
+71
+43
+47
+40
+38
+158
+125
+46
+158
+125
+46
+170
+137
+67
+237
+233
+225
+253
+255
+252
+253
+255
+252
+253
+255
+252
+207
+202
+200
+164
+158
+157
+146
+135
+124
+120
+114
+108
+89
+84
+82
+65
+58
+56
+47
+40
+38
+24
+22
+23
+24
+22
+23
+35
+31
+30
+94
+60
+47
+178
+86
+46
+226
+110
+35
+241
+100
+24
+144
+77
+47
+65
+58
+56
+253
+212
+188
+255
+215
+190
+238
+205
+179
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+129
+106
+52
+48
+58
+59
+101
+100
+92
+217
+187
+166
+245
+212
+186
+245
+212
+186
+194
+173
+157
+76
+78
+76
+56
+64
+60
+145
+114
+49
+168
+127
+42
+158
+125
+46
+158
+125
+46
+171
+129
+45
+88
+82
+59
+77
+85
+81
+176
+156
+141
+48
+58
+59
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+95
+87
+59
+41
+58
+57
+137
+127
+115
+227
+196
+175
+255
+215
+190
+255
+215
+190
+255
+215
+190
+245
+212
+186
+207
+178
+158
+120
+114
+108
+48
+58
+59
+62
+63
+61
+100
+89
+56
+95
+87
+59
+51
+62
+63
+120
+114
+108
+227
+196
+175
+55
+66
+67
+100
+89
+56
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+137
+110
+49
+51
+62
+63
+84
+85
+82
+207
+178
+158
+245
+212
+186
+245
+212
+186
+207
+178
+158
+97
+98
+96
+51
+62
+63
+137
+110
+49
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+88
+82
+59
+91
+92
+89
+120
+114
+108
+63
+69
+60
+158
+125
+46
+161
+127
+40
+158
+125
+46
+158
+125
+46
+168
+127
+42
+88
+82
+59
+43
+57
+62
+161
+144
+134
+227
+196
+175
+253
+212
+188
+234
+204
+183
+161
+144
+134
+51
+62
+63
+75
+74
+61
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+145
+114
+49
+51
+62
+63
+137
+127
+115
+58
+69
+70
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+63
+69
+60
+146
+135
+124
+176
+156
+141
+48
+58
+59
+137
+110
+49
+171
+129
+45
+158
+125
+46
+161
+127
+40
+158
+125
+46
+75
+74
+61
+43
+57
+62
+161
+144
+134
+234
+204
+183
+255
+215
+190
+255
+215
+190
+255
+215
+190
+245
+212
+186
+194
+173
+157
+109
+106
+99
+43
+57
+62
+69
+69
+61
+105
+93
+60
+88
+82
+59
+48
+58
+59
+146
+135
+124
+255
+215
+190
+161
+144
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+225
+124
+48
+95
+78
+64
+43
+57
+62
+161
+144
+134
+234
+204
+183
+245
+212
+186
+227
+196
+175
+146
+135
+124
+35
+56
+60
+125
+90
+64
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+125
+52
+188
+112
+56
+51
+62
+63
+161
+144
+134
+234
+204
+183
+51
+62
+63
+125
+90
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+234
+125
+52
+163
+104
+61
+43
+57
+62
+97
+98
+96
+207
+178
+158
+245
+212
+186
+245
+212
+186
+207
+178
+158
+91
+92
+89
+48
+58
+59
+173
+106
+60
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+126
+45
+118
+86
+65
+55
+66
+67
+234
+204
+183
+146
+135
+124
+56
+64
+60
+194
+112
+58
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+125
+52
+112
+85
+63
+35
+56
+60
+146
+135
+124
+227
+196
+175
+253
+212
+188
+234
+204
+183
+161
+144
+134
+43
+57
+62
+95
+78
+64
+225
+124
+48
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+194
+112
+58
+56
+64
+60
+101
+100
+92
+56
+64
+60
+188
+112
+56
+227
+126
+50
+224
+123
+55
+227
+126
+50
+183
+110
+59
+51
+62
+63
+176
+156
+141
+250
+197
+158
+252
+185
+144
+248
+180
+134
+248
+180
+134
+251
+192
+154
+172
+150
+134
+48
+58
+59
+173
+106
+60
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+126
+45
+139
+96
+61
+41
+58
+57
+120
+114
+108
+217
+187
+166
+245
+212
+186
+234
+204
+183
+176
+156
+141
+58
+69
+70
+81
+73
+62
+214
+121
+50
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+255
+215
+190
+255
+215
+190
+217
+187
+166
+133
+120
+107
+84
+85
+82
+91
+92
+89
+146
+135
+124
+234
+204
+183
+238
+205
+179
+63
+74
+74
+95
+78
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+227
+126
+50
+194
+112
+58
+56
+64
+60
+84
+85
+82
+194
+173
+157
+245
+212
+186
+245
+212
+186
+217
+187
+166
+109
+106
+99
+41
+58
+57
+146
+97
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+234
+126
+45
+146
+97
+64
+51
+62
+63
+187
+166
+150
+76
+78
+76
+135
+94
+64
+234
+126
+45
+224
+123
+55
+227
+126
+50
+227
+126
+50
+89
+75
+66
+97
+98
+96
+250
+200
+166
+249
+189
+146
+248
+180
+134
+248
+180
+134
+252
+185
+144
+232
+190
+161
+70
+79
+77
+112
+85
+63
+234
+126
+45
+224
+123
+55
+224
+123
+55
+227
+126
+50
+199
+115
+54
+65
+67
+64
+70
+79
+77
+187
+166
+150
+238
+205
+179
+245
+212
+186
+217
+187
+166
+133
+120
+107
+35
+56
+60
+135
+94
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+224
+123
+55
+234
+126
+45
+139
+96
+61
+55
+66
+67
+250
+200
+166
+249
+174
+124
+249
+152
+92
+247
+130
+60
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+123
+41
+247
+130
+60
+247
+150
+84
+251
+168
+115
+203
+161
+131
+55
+48
+48
+24
+22
+23
+71
+60
+43
+145
+114
+49
+171
+129
+45
+171
+129
+45
+158
+125
+46
+156
+125
+62
+154
+125
+71
+154
+125
+71
+156
+125
+62
+156
+125
+62
+171
+129
+45
+171
+129
+45
+101
+83
+47
+35
+31
+30
+123
+102
+54
+171
+129
+45
+158
+125
+46
+160
+120
+43
+224
+207
+180
+253
+255
+252
+253
+255
+252
+219
+212
+208
+47
+40
+38
+24
+22
+23
+24
+22
+23
+24
+22
+23
+24
+22
+23
+24
+22
+23
+35
+31
+30
+35
+31
+30
+24
+22
+23
+47
+40
+38
+226
+110
+35
+241
+100
+24
+226
+110
+35
+226
+110
+35
+144
+77
+47
+55
+48
+48
+238
+205
+179
+255
+215
+190
+238
+205
+179
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+123
+102
+54
+56
+64
+60
+51
+62
+63
+84
+85
+82
+84
+85
+82
+48
+58
+59
+63
+69
+60
+129
+106
+52
+168
+127
+42
+158
+125
+46
+158
+125
+46
+168
+127
+42
+145
+114
+49
+56
+64
+60
+137
+127
+115
+245
+212
+186
+84
+85
+82
+69
+69
+61
+158
+125
+46
+158
+125
+46
+158
+125
+46
+161
+127
+40
+158
+125
+46
+95
+87
+59
+48
+58
+59
+63
+74
+74
+109
+106
+99
+133
+120
+107
+133
+120
+107
+91
+92
+89
+51
+62
+63
+56
+64
+60
+100
+89
+56
+152
+119
+47
+171
+129
+45
+175
+132
+40
+100
+89
+56
+48
+58
+59
+217
+187
+166
+120
+114
+108
+63
+69
+60
+152
+119
+47
+161
+127
+40
+158
+125
+46
+158
+125
+46
+168
+127
+42
+129
+106
+52
+61
+67
+58
+51
+62
+63
+84
+85
+82
+84
+85
+82
+51
+62
+63
+56
+64
+60
+123
+102
+54
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+97
+98
+96
+187
+166
+150
+48
+58
+59
+123
+102
+54
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+158
+125
+46
+83
+78
+61
+48
+58
+59
+63
+74
+74
+91
+92
+89
+70
+79
+77
+48
+58
+59
+75
+74
+61
+152
+119
+47
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+145
+114
+49
+51
+62
+63
+137
+127
+115
+58
+69
+70
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+63
+69
+60
+146
+135
+124
+234
+204
+183
+63
+74
+74
+83
+78
+61
+168
+127
+42
+158
+125
+46
+158
+125
+46
+168
+127
+42
+152
+119
+47
+83
+78
+61
+48
+58
+59
+70
+79
+77
+109
+106
+99
+133
+120
+107
+120
+114
+108
+84
+85
+82
+48
+58
+59
+61
+67
+58
+111
+94
+57
+158
+125
+46
+171
+129
+45
+171
+129
+45
+88
+82
+59
+58
+69
+70
+238
+205
+179
+172
+150
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+212
+120
+56
+95
+78
+64
+43
+57
+62
+70
+79
+77
+84
+85
+82
+63
+74
+74
+48
+58
+59
+118
+86
+65
+225
+124
+48
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+126
+45
+112
+85
+63
+55
+66
+67
+227
+196
+175
+255
+215
+190
+120
+114
+108
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+155
+100
+63
+62
+63
+61
+51
+62
+63
+77
+85
+81
+77
+85
+81
+51
+62
+63
+62
+63
+61
+155
+100
+63
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+125
+52
+199
+115
+54
+56
+64
+60
+120
+114
+108
+255
+215
+190
+217
+187
+166
+43
+57
+62
+125
+90
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+227
+126
+50
+224
+123
+55
+106
+82
+65
+48
+58
+59
+63
+74
+74
+84
+85
+82
+70
+79
+77
+43
+57
+62
+95
+78
+64
+212
+120
+56
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+194
+112
+58
+56
+64
+60
+101
+100
+92
+56
+64
+60
+188
+112
+56
+227
+126
+50
+224
+123
+55
+234
+125
+52
+183
+110
+59
+51
+62
+63
+172
+150
+134
+251
+192
+154
+248
+180
+134
+249
+174
+124
+249
+174
+124
+248
+180
+134
+236
+186
+153
+63
+74
+74
+95
+78
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+227
+126
+50
+227
+126
+50
+135
+94
+64
+51
+62
+63
+55
+66
+67
+84
+85
+82
+70
+79
+77
+41
+58
+57
+81
+73
+62
+199
+115
+54
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+255
+215
+190
+194
+173
+157
+58
+69
+70
+62
+63
+61
+106
+82
+65
+95
+78
+64
+51
+62
+63
+91
+92
+89
+238
+205
+179
+161
+144
+134
+48
+58
+59
+183
+110
+59
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+125
+52
+173
+106
+60
+65
+67
+64
+48
+58
+59
+77
+85
+81
+84
+85
+82
+55
+66
+67
+56
+64
+60
+146
+97
+64
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+209
+117
+53
+69
+69
+61
+101
+100
+92
+227
+196
+175
+63
+74
+74
+135
+94
+64
+234
+125
+52
+224
+123
+55
+227
+126
+50
+227
+126
+50
+89
+75
+66
+101
+100
+92
+250
+197
+158
+252
+185
+144
+249
+174
+124
+249
+174
+124
+250
+176
+132
+251
+192
+154
+120
+114
+108
+62
+63
+61
+209
+117
+53
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+188
+112
+56
+76
+70
+64
+41
+58
+57
+77
+85
+81
+84
+85
+82
+58
+69
+70
+48
+58
+59
+125
+90
+64
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+234
+126
+45
+139
+96
+61
+55
+66
+67
+250
+200
+166
+249
+174
+124
+249
+152
+92
+247
+130
+60
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+243
+101
+2
+247
+103
+7
+247
+103
+7
+247
+111
+26
+247
+118
+39
+247
+130
+53
+250
+139
+73
+246
+156
+93
+249
+174
+124
+203
+161
+131
+55
+48
+48
+24
+22
+23
+35
+31
+30
+85
+71
+43
+137
+110
+49
+152
+119
+47
+168
+127
+42
+171
+129
+45
+171
+129
+45
+168
+127
+42
+152
+119
+47
+117
+98
+55
+59
+50
+39
+35
+31
+30
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+152
+119
+47
+224
+207
+180
+253
+255
+252
+253
+255
+252
+253
+255
+252
+146
+135
+124
+65
+58
+56
+35
+31
+30
+24
+22
+23
+24
+22
+23
+35
+31
+30
+35
+31
+30
+35
+31
+30
+35
+31
+30
+24
+22
+23
+83
+53
+42
+236
+108
+29
+236
+108
+29
+226
+110
+35
+94
+60
+47
+65
+58
+56
+253
+212
+188
+255
+215
+190
+238
+205
+179
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+161
+127
+40
+168
+127
+42
+145
+114
+49
+105
+93
+60
+83
+78
+61
+83
+78
+61
+111
+94
+57
+158
+125
+46
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+88
+82
+59
+51
+62
+63
+217
+187
+166
+255
+215
+190
+176
+156
+141
+43
+57
+62
+105
+93
+60
+171
+129
+45
+158
+125
+46
+158
+125
+46
+161
+127
+40
+168
+127
+42
+137
+110
+49
+88
+82
+59
+69
+69
+61
+62
+63
+61
+63
+69
+60
+75
+74
+61
+105
+93
+60
+152
+119
+47
+171
+129
+45
+168
+127
+42
+158
+125
+46
+171
+129
+45
+129
+106
+52
+48
+58
+59
+194
+173
+157
+207
+178
+158
+43
+57
+62
+100
+89
+56
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+152
+119
+47
+111
+94
+57
+83
+78
+61
+83
+78
+61
+105
+93
+60
+145
+114
+49
+168
+127
+42
+161
+127
+40
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+88
+82
+59
+84
+85
+82
+245
+212
+186
+77
+85
+81
+75
+74
+61
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+168
+127
+42
+129
+106
+52
+95
+87
+59
+81
+73
+62
+95
+87
+59
+123
+102
+54
+168
+127
+42
+168
+127
+42
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+145
+114
+49
+56
+64
+60
+137
+127
+115
+58
+69
+70
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+63
+69
+60
+137
+127
+115
+255
+215
+190
+161
+144
+134
+48
+58
+59
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+168
+127
+42
+129
+106
+52
+88
+82
+59
+69
+69
+61
+62
+63
+61
+63
+69
+60
+75
+74
+61
+117
+98
+55
+152
+119
+47
+171
+129
+45
+161
+127
+40
+158
+125
+46
+171
+129
+45
+111
+94
+57
+48
+58
+59
+227
+196
+175
+176
+156
+141
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+227
+126
+50
+227
+126
+50
+163
+104
+61
+112
+85
+63
+95
+78
+64
+118
+86
+65
+173
+106
+60
+227
+126
+50
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+125
+52
+183
+110
+59
+51
+62
+63
+133
+120
+107
+255
+215
+190
+255
+215
+190
+217
+187
+166
+51
+62
+63
+106
+82
+65
+234
+126
+45
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+126
+45
+199
+115
+54
+135
+94
+64
+95
+78
+64
+95
+78
+64
+135
+94
+64
+199
+115
+54
+234
+125
+52
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+126
+45
+106
+82
+65
+51
+62
+63
+217
+187
+166
+255
+215
+190
+255
+215
+190
+120
+114
+108
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+227
+126
+50
+173
+106
+60
+118
+86
+65
+95
+78
+64
+112
+85
+63
+163
+104
+61
+227
+126
+50
+227
+126
+50
+227
+126
+50
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+194
+112
+58
+56
+64
+60
+101
+100
+92
+56
+64
+60
+188
+112
+56
+227
+126
+50
+224
+123
+55
+227
+126
+50
+183
+110
+59
+51
+62
+63
+172
+150
+134
+252
+185
+144
+249
+174
+124
+247
+165
+111
+247
+165
+111
+249
+174
+124
+252
+185
+144
+154
+133
+118
+48
+58
+59
+163
+104
+61
+234
+126
+45
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+125
+52
+188
+112
+56
+125
+90
+64
+95
+78
+64
+106
+82
+65
+155
+100
+63
+224
+123
+55
+234
+125
+52
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+137
+127
+115
+253
+212
+188
+91
+92
+89
+69
+69
+61
+194
+112
+58
+234
+126
+45
+234
+126
+45
+163
+104
+61
+51
+62
+63
+137
+127
+115
+238
+205
+179
+63
+74
+74
+89
+75
+66
+227
+126
+50
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+209
+117
+53
+146
+97
+64
+106
+82
+65
+95
+78
+64
+125
+90
+64
+194
+112
+58
+234
+126
+45
+227
+126
+50
+224
+123
+55
+227
+126
+50
+234
+126
+45
+125
+90
+64
+41
+58
+57
+194
+173
+157
+238
+205
+179
+63
+74
+74
+135
+94
+64
+234
+125
+52
+224
+123
+55
+227
+126
+50
+227
+126
+50
+89
+75
+66
+101
+100
+92
+251
+192
+154
+250
+176
+132
+251
+168
+115
+247
+165
+111
+249
+174
+124
+245
+179
+138
+195
+157
+134
+41
+58
+57
+135
+94
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+224
+123
+55
+234
+125
+52
+214
+121
+50
+146
+97
+64
+106
+82
+65
+95
+78
+64
+125
+90
+64
+183
+110
+59
+227
+126
+50
+227
+126
+50
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+234
+125
+52
+139
+96
+61
+55
+66
+67
+250
+200
+166
+249
+174
+124
+249
+152
+92
+247
+130
+60
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+247
+103
+7
+246
+109
+10
+247
+111
+26
+247
+118
+39
+247
+130
+53
+247
+143
+74
+249
+159
+103
+250
+176
+132
+219
+170
+138
+115
+102
+92
+47
+40
+38
+24
+22
+23
+35
+31
+30
+47
+40
+38
+59
+50
+39
+59
+50
+39
+59
+50
+39
+59
+50
+39
+47
+40
+38
+47
+40
+38
+71
+60
+43
+137
+110
+49
+171
+129
+45
+158
+125
+46
+158
+125
+46
+152
+119
+47
+170
+137
+67
+219
+212
+208
+237
+233
+225
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+219
+212
+208
+152
+147
+147
+109
+106
+99
+65
+67
+64
+35
+31
+30
+35
+31
+30
+35
+31
+30
+35
+31
+30
+24
+22
+23
+94
+60
+47
+178
+86
+46
+109
+63
+45
+35
+31
+30
+124
+111
+99
+251
+209
+178
+251
+209
+178
+234
+204
+183
+76
+78
+76
+95
+87
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+117
+98
+55
+129
+106
+52
+168
+127
+42
+168
+127
+42
+171
+129
+45
+168
+127
+42
+168
+127
+42
+171
+129
+45
+161
+127
+40
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+117
+98
+55
+48
+58
+59
+146
+135
+124
+255
+215
+190
+255
+215
+190
+255
+215
+190
+120
+114
+108
+51
+62
+63
+123
+102
+54
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+168
+127
+42
+158
+125
+46
+152
+119
+47
+152
+119
+47
+158
+125
+46
+168
+127
+42
+168
+127
+42
+158
+125
+46
+158
+125
+46
+168
+127
+42
+158
+125
+46
+81
+73
+62
+58
+69
+70
+227
+196
+175
+255
+215
+190
+120
+114
+108
+48
+58
+59
+129
+106
+52
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+161
+127
+40
+168
+127
+42
+168
+127
+42
+168
+127
+42
+171
+129
+45
+168
+127
+42
+168
+127
+42
+152
+119
+47
+117
+98
+55
+168
+127
+42
+158
+125
+46
+158
+125
+46
+168
+127
+42
+88
+82
+59
+84
+85
+82
+255
+215
+190
+176
+156
+141
+48
+58
+59
+111
+94
+57
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+168
+127
+42
+168
+127
+42
+168
+127
+42
+168
+127
+42
+158
+125
+46
+158
+125
+46
+145
+114
+49
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+145
+114
+49
+51
+62
+63
+137
+127
+115
+58
+69
+70
+117
+98
+55
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+63
+69
+60
+137
+127
+115
+255
+215
+190
+238
+205
+179
+91
+92
+89
+56
+64
+60
+137
+110
+49
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+168
+127
+42
+158
+125
+46
+152
+119
+47
+158
+125
+46
+168
+127
+42
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+152
+119
+47
+69
+69
+61
+84
+85
+82
+245
+212
+186
+172
+150
+134
+62
+63
+61
+199
+115
+54
+227
+126
+50
+224
+123
+55
+227
+126
+50
+199
+115
+54
+125
+90
+64
+227
+126
+50
+227
+126
+50
+227
+126
+50
+234
+125
+52
+227
+126
+50
+234
+125
+52
+234
+125
+52
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+214
+121
+50
+81
+73
+62
+63
+74
+74
+227
+196
+175
+255
+215
+190
+253
+212
+188
+255
+215
+190
+146
+135
+124
+48
+58
+59
+146
+97
+64
+234
+126
+45
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+126
+45
+227
+126
+50
+227
+126
+50
+234
+126
+45
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+126
+45
+139
+96
+61
+48
+58
+59
+146
+135
+124
+255
+215
+190
+253
+212
+188
+255
+215
+190
+217
+187
+166
+55
+66
+67
+95
+78
+64
+225
+124
+48
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+125
+52
+227
+126
+50
+227
+126
+50
+227
+126
+50
+224
+123
+55
+234
+126
+45
+163
+104
+61
+183
+110
+59
+227
+126
+50
+224
+123
+55
+227
+126
+50
+194
+112
+58
+56
+64
+60
+97
+98
+96
+56
+64
+60
+188
+112
+56
+227
+126
+50
+224
+123
+55
+227
+126
+50
+183
+110
+59
+51
+62
+63
+167
+142
+123
+248
+180
+134
+247
+165
+111
+249
+159
+103
+246
+156
+93
+249
+159
+103
+249
+174
+124
+239
+182
+144
+77
+85
+81
+65
+67
+64
+199
+115
+54
+234
+125
+52
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+125
+52
+227
+126
+50
+227
+126
+50
+234
+125
+52
+227
+126
+50
+227
+126
+50
+135
+94
+64
+188
+112
+56
+227
+126
+50
+224
+123
+55
+227
+126
+50
+209
+117
+53
+65
+67
+64
+146
+135
+124
+227
+196
+175
+43
+57
+62
+146
+97
+64
+234
+126
+45
+224
+123
+55
+224
+123
+55
+234
+126
+45
+106
+82
+65
+70
+79
+77
+253
+212
+188
+176
+156
+141
+41
+58
+57
+125
+90
+64
+234
+126
+45
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+125
+52
+234
+125
+52
+227
+126
+50
+234
+125
+52
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+126
+45
+155
+100
+63
+48
+58
+59
+120
+114
+108
+253
+212
+188
+234
+204
+183
+63
+74
+74
+135
+94
+64
+234
+126
+45
+224
+123
+55
+227
+126
+50
+227
+126
+50
+89
+75
+66
+101
+100
+92
+252
+185
+144
+245
+169
+119
+249
+159
+103
+249
+159
+103
+247
+165
+111
+249
+174
+124
+251
+192
+154
+109
+106
+99
+62
+63
+61
+188
+112
+56
+234
+125
+52
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+125
+52
+234
+125
+52
+227
+126
+50
+234
+125
+52
+227
+126
+50
+227
+126
+50
+212
+120
+56
+199
+115
+54
+224
+123
+55
+224
+123
+55
+224
+123
+55
+234
+126
+45
+139
+96
+61
+55
+66
+67
+250
+200
+166
+249
+174
+124
+247
+150
+84
+247
+130
+60
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+243
+101
+2
+243
+101
+2
+247
+103
+7
+247
+111
+26
+247
+111
+26
+247
+123
+41
+247
+130
+60
+243
+141
+78
+249
+159
+103
+250
+176
+132
+251
+192
+154
+207
+178
+158
+154
+133
+118
+82
+69
+65
+24
+22
+23
+71
+60
+43
+101
+83
+47
+101
+83
+47
+101
+83
+47
+117
+98
+55
+145
+114
+49
+171
+129
+45
+168
+127
+42
+160
+120
+43
+160
+120
+43
+158
+125
+46
+192
+155
+91
+237
+233
+225
+81
+77
+76
+55
+48
+48
+74
+68
+68
+81
+77
+76
+89
+84
+82
+91
+92
+89
+89
+84
+82
+81
+77
+76
+65
+58
+56
+47
+40
+38
+35
+31
+30
+55
+48
+48
+115
+102
+92
+172
+150
+134
+55
+48
+48
+24
+22
+23
+24
+22
+23
+24
+22
+23
+65
+58
+56
+230
+173
+136
+251
+192
+154
+250
+197
+158
+250
+200
+166
+84
+85
+82
+88
+82
+59
+171
+129
+45
+158
+125
+46
+158
+125
+46
+171
+129
+45
+83
+78
+61
+69
+69
+61
+168
+127
+42
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+171
+129
+45
+117
+98
+55
+48
+58
+59
+101
+100
+92
+238
+205
+179
+253
+204
+176
+250
+200
+166
+253
+204
+176
+238
+205
+179
+91
+92
+89
+51
+62
+63
+117
+98
+55
+171
+129
+45
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+161
+127
+40
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+171
+129
+45
+145
+114
+49
+75
+74
+61
+48
+58
+59
+172
+150
+134
+253
+212
+188
+255
+215
+190
+234
+204
+183
+84
+85
+82
+56
+64
+60
+129
+106
+52
+171
+129
+45
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+168
+127
+42
+81
+73
+62
+63
+69
+60
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+83
+78
+61
+84
+85
+82
+255
+215
+190
+245
+212
+186
+109
+106
+99
+51
+62
+63
+123
+102
+54
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+161
+127
+40
+171
+129
+45
+105
+93
+60
+51
+62
+63
+137
+110
+49
+168
+127
+42
+158
+125
+46
+168
+127
+42
+145
+114
+49
+51
+62
+63
+137
+127
+115
+58
+69
+70
+111
+94
+57
+171
+129
+45
+158
+125
+46
+158
+125
+46
+158
+125
+46
+62
+63
+61
+137
+127
+115
+255
+215
+190
+255
+215
+190
+227
+196
+175
+77
+85
+81
+56
+64
+60
+129
+106
+52
+171
+129
+45
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+161
+127
+40
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+168
+127
+42
+137
+110
+49
+69
+69
+61
+51
+62
+63
+187
+166
+150
+255
+215
+190
+172
+150
+134
+51
+62
+63
+194
+112
+58
+227
+126
+50
+224
+123
+55
+234
+125
+52
+183
+110
+59
+48
+58
+59
+155
+100
+63
+234
+126
+45
+224
+123
+55
+224
+123
+55
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+125
+52
+209
+117
+53
+89
+75
+66
+48
+58
+59
+187
+166
+150
+250
+200
+166
+250
+197
+158
+251
+192
+154
+250
+197
+158
+250
+200
+166
+109
+106
+99
+48
+58
+59
+135
+94
+64
+234
+125
+52
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+227
+126
+50
+135
+94
+64
+43
+57
+62
+120
+114
+108
+250
+200
+166
+250
+197
+158
+251
+192
+154
+250
+197
+158
+250
+200
+166
+172
+150
+134
+41
+58
+57
+106
+82
+65
+214
+121
+50
+234
+125
+52
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+224
+123
+55
+227
+126
+50
+234
+126
+45
+183
+110
+59
+48
+58
+59
+135
+94
+64
+234
+126
+45
+224
+123
+55
+227
+126
+50
+188
+112
+56
+51
+62
+63
+109
+106
+99
+51
+62
+63
+183
+110
+59
+227
+126
+50
+224
+123
+55
+234
+125
+52
+173
+106
+60
+48
+58
+59
+178
+146
+122
+245
+169
+119
+246
+156
+93
+247
+150
+84
+249
+146
+83
+247
+150
+84
+249
+159
+103
+249
+174
+124
+203
+161
+131
+58
+69
+70
+76
+70
+64
+194
+112
+58
+234
+126
+45
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+126
+45
+183
+110
+59
+48
+58
+59
+163
+104
+61
+234
+126
+45
+224
+123
+55
+227
+126
+50
+209
+117
+53
+62
+63
+61
+146
+135
+124
+217
+187
+166
+43
+57
+62
+163
+104
+61
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+126
+45
+125
+90
+64
+58
+69
+70
+234
+204
+183
+255
+215
+190
+137
+127
+115
+41
+58
+57
+118
+86
+65
+225
+124
+48
+234
+126
+45
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+126
+45
+146
+97
+64
+51
+62
+63
+97
+98
+96
+238
+205
+179
+255
+215
+190
+234
+204
+183
+63
+74
+74
+118
+86
+65
+234
+126
+45
+224
+123
+55
+227
+126
+50
+227
+126
+50
+81
+73
+62
+101
+100
+92
+250
+176
+132
+247
+165
+111
+246
+156
+93
+249
+152
+92
+249
+159
+103
+251
+168
+115
+252
+185
+144
+217
+187
+166
+58
+69
+70
+69
+69
+61
+199
+115
+54
+234
+126
+45
+227
+126
+50
+224
+123
+55
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+224
+123
+55
+227
+126
+50
+225
+124
+48
+81
+73
+62
+81
+73
+62
+227
+126
+50
+227
+126
+50
+224
+123
+55
+234
+126
+45
+139
+96
+61
+55
+66
+67
+250
+197
+158
+249
+174
+124
+247
+150
+84
+247
+130
+60
+247
+118
+39
+247
+111
+26
+247
+103
+7
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+237
+95
+0
+237
+95
+0
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+237
+95
+0
+243
+101
+2
+247
+103
+7
+236
+102
+14
+247
+111
+26
+246
+116
+28
+247
+123
+41
+247
+130
+60
+243
+141
+78
+249
+159
+103
+249
+174
+124
+249
+189
+146
+253
+204
+176
+124
+111
+99
+35
+31
+30
+145
+114
+49
+175
+132
+40
+171
+129
+45
+168
+127
+42
+192
+155
+91
+216
+194
+154
+224
+207
+180
+224
+207
+180
+216
+194
+154
+216
+194
+154
+239
+227
+208
+253
+255
+252
+253
+255
+252
+186
+181
+179
+146
+135
+124
+120
+114
+108
+109
+106
+99
+95
+78
+64
+71
+60
+43
+85
+71
+43
+101
+83
+47
+108
+87
+46
+35
+31
+30
+150
+125
+114
+227
+196
+175
+255
+215
+190
+253
+212
+188
+212
+173
+150
+121
+100
+85
+95
+78
+64
+129
+102
+78
+234
+168
+124
+250
+176
+132
+250
+176
+132
+248
+180
+134
+249
+189
+146
+124
+111
+99
+62
+63
+61
+152
+119
+47
+171
+129
+45
+171
+129
+45
+145
+114
+49
+56
+64
+60
+43
+57
+62
+83
+78
+61
+152
+119
+47
+171
+129
+45
+171
+129
+45
+168
+127
+42
+168
+127
+42
+171
+129
+45
+171
+129
+45
+152
+119
+47
+95
+87
+59
+48
+58
+59
+101
+100
+92
+236
+186
+153
+251
+192
+154
+252
+185
+144
+248
+180
+134
+245
+179
+138
+249
+189
+146
+236
+186
+153
+101
+100
+92
+48
+58
+59
+88
+82
+59
+137
+110
+49
+168
+127
+42
+171
+129
+45
+168
+127
+42
+168
+127
+42
+168
+127
+42
+168
+127
+42
+171
+129
+45
+171
+129
+45
+168
+127
+42
+145
+114
+49
+100
+89
+56
+56
+64
+60
+58
+69
+70
+172
+150
+134
+250
+200
+166
+251
+192
+154
+250
+197
+158
+250
+200
+166
+217
+187
+166
+84
+85
+82
+51
+62
+63
+105
+93
+60
+158
+125
+46
+171
+129
+45
+171
+129
+45
+168
+127
+42
+168
+127
+42
+168
+127
+42
+171
+129
+45
+152
+119
+47
+83
+78
+61
+43
+57
+62
+48
+58
+59
+129
+106
+52
+175
+132
+40
+171
+129
+45
+158
+125
+46
+63
+69
+60
+120
+114
+108
+255
+215
+190
+255
+215
+190
+227
+196
+175
+84
+85
+82
+51
+62
+63
+105
+93
+60
+158
+125
+46
+171
+129
+45
+171
+129
+45
+168
+127
+42
+168
+127
+42
+168
+127
+42
+171
+129
+45
+158
+125
+46
+105
+93
+60
+48
+58
+59
+48
+58
+59
+129
+106
+52
+168
+127
+42
+158
+125
+46
+168
+127
+42
+145
+114
+49
+51
+62
+63
+172
+150
+134
+91
+92
+89
+75
+74
+61
+168
+127
+42
+171
+129
+45
+175
+132
+40
+117
+98
+55
+48
+58
+59
+176
+156
+141
+253
+204
+176
+253
+204
+176
+253
+204
+176
+217
+187
+166
+84
+85
+82
+48
+58
+59
+95
+87
+59
+145
+114
+49
+168
+127
+42
+171
+129
+45
+168
+127
+42
+168
+127
+42
+168
+127
+42
+168
+127
+42
+171
+129
+45
+171
+129
+45
+158
+125
+46
+137
+110
+49
+95
+87
+59
+51
+62
+63
+70
+79
+77
+187
+166
+150
+251
+209
+178
+251
+209
+178
+207
+178
+158
+43
+57
+62
+135
+94
+64
+238
+123
+45
+234
+126
+45
+234
+126
+45
+118
+86
+65
+35
+56
+60
+56
+64
+60
+155
+100
+63
+234
+125
+52
+234
+126
+45
+234
+125
+52
+227
+126
+50
+227
+126
+50
+234
+126
+45
+227
+126
+50
+163
+104
+61
+76
+70
+64
+51
+62
+63
+167
+142
+123
+251
+192
+154
+248
+180
+134
+249
+174
+124
+249
+174
+124
+250
+176
+132
+245
+179
+138
+236
+186
+153
+109
+106
+99
+41
+58
+57
+95
+78
+64
+183
+110
+59
+234
+125
+52
+234
+126
+45
+234
+125
+52
+227
+126
+50
+227
+126
+50
+234
+125
+52
+234
+126
+45
+227
+126
+50
+183
+110
+59
+95
+78
+64
+43
+57
+62
+124
+111
+99
+236
+186
+153
+252
+185
+144
+250
+176
+132
+249
+174
+124
+249
+174
+124
+248
+180
+134
+251
+192
+154
+154
+133
+118
+43
+57
+62
+81
+73
+62
+173
+106
+60
+227
+126
+50
+234
+126
+45
+227
+126
+50
+227
+126
+50
+227
+126
+50
+234
+126
+45
+234
+125
+52
+155
+100
+63
+56
+64
+60
+35
+56
+60
+89
+75
+66
+227
+126
+50
+234
+126
+45
+238
+128
+40
+146
+97
+64
+43
+57
+62
+176
+156
+141
+58
+69
+70
+118
+86
+65
+234
+126
+45
+234
+126
+45
+234
+126
+45
+112
+85
+63
+43
+57
+62
+210
+156
+119
+245
+162
+103
+247
+150
+84
+247
+143
+74
+248
+138
+64
+241
+138
+68
+249
+146
+83
+249
+159
+103
+250
+176
+132
+195
+157
+134
+58
+69
+70
+65
+67
+64
+155
+100
+63
+227
+126
+50
+234
+126
+45
+227
+126
+50
+227
+126
+50
+234
+125
+52
+234
+126
+45
+234
+126
+45
+173
+106
+60
+65
+67
+64
+35
+56
+60
+106
+82
+65
+234
+126
+45
+234
+126
+45
+238
+128
+40
+146
+97
+64
+43
+57
+62
+187
+166
+150
+234
+204
+183
+55
+66
+67
+106
+82
+65
+234
+126
+45
+234
+125
+52
+234
+125
+52
+224
+123
+55
+81
+73
+62
+91
+92
+89
+245
+212
+186
+253
+212
+188
+253
+212
+188
+137
+127
+115
+41
+58
+57
+89
+75
+66
+173
+106
+60
+227
+126
+50
+234
+126
+45
+227
+126
+50
+227
+126
+50
+227
+126
+50
+234
+125
+52
+234
+126
+45
+234
+125
+52
+194
+112
+58
+106
+82
+65
+43
+57
+62
+101
+100
+92
+227
+196
+175
+251
+209
+178
+251
+209
+178
+253
+212
+188
+97
+98
+96
+69
+69
+61
+209
+117
+53
+234
+126
+45
+238
+128
+40
+173
+106
+60
+51
+62
+63
+139
+115
+96
+251
+168
+115
+246
+156
+93
+247
+150
+84
+249
+146
+83
+249
+152
+92
+247
+165
+111
+248
+180
+134
+250
+200
+166
+187
+166
+150
+55
+66
+67
+69
+69
+61
+163
+104
+61
+234
+125
+52
+234
+126
+45
+234
+125
+52
+227
+126
+50
+227
+126
+50
+234
+126
+45
+234
+126
+45
+199
+115
+54
+95
+78
+64
+35
+56
+60
+81
+73
+62
+227
+126
+50
+227
+126
+50
+224
+123
+55
+234
+126
+45
+139
+96
+61
+51
+62
+63
+250
+197
+158
+245
+169
+119
+247
+150
+84
+247
+130
+60
+247
+118
+39
+235
+107
+16
+243
+101
+2
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+246
+97
+3
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+246
+97
+3
+237
+95
+0
+243
+101
+2
+247
+103
+7
+236
+102
+14
+247
+111
+26
+246
+116
+28
+238
+123
+45
+241
+132
+59
+247
+143
+74
+246
+156
+93
+245
+169
+119
+230
+173
+136
+47
+40
+38
+59
+50
+39
+168
+127
+42
+161
+127
+40
+160
+120
+43
+192
+155
+91
+255
+238
+227
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+253
+255
+252
+239
+227
+208
+170
+137
+67
+171
+129
+45
+171
+129
+45
+171
+129
+45
+59
+50
+39
+154
+133
+118
+250
+200
+166
+250
+197
+158
+249
+189
+146
+248
+180
+134
+249
+174
+124
+247
+165
+111
+247
+165
+111
+245
+162
+103
+249
+159
+103
+245
+162
+103
+247
+165
+111
+249
+174
+124
+203
+161
+131
+55
+66
+67
+69
+69
+61
+111
+94
+57
+105
+93
+60
+69
+69
+61
+63
+74
+74
+137
+127
+115
+51
+62
+63
+62
+63
+61
+95
+87
+59
+129
+106
+52
+137
+110
+49
+137
+110
+49
+123
+102
+54
+95
+87
+59
+62
+63
+61
+51
+62
+63
+133
+120
+107
+239
+182
+144
+248
+180
+134
+245
+169
+119
+247
+165
+111
+249
+159
+103
+245
+162
+103
+251
+168
+115
+250
+176
+132
+239
+182
+144
+154
+133
+118
+63
+74
+74
+51
+62
+63
+75
+74
+61
+105
+93
+60
+123
+102
+54
+137
+110
+49
+137
+110
+49
+137
+110
+49
+123
+102
+54
+100
+89
+56
+75
+74
+61
+56
+64
+60
+55
+66
+67
+124
+111
+99
+219
+170
+138
+252
+185
+144
+250
+176
+132
+249
+174
+124
+249
+174
+124
+250
+176
+132
+252
+185
+144
+236
+186
+153
+124
+111
+99
+48
+58
+59
+63
+69
+60
+95
+87
+59
+123
+102
+54
+137
+110
+49
+137
+110
+49
+129
+106
+52
+95
+87
+59
+62
+63
+61
+55
+66
+67
+146
+135
+124
+77
+85
+81
+61
+67
+58
+105
+93
+60
+111
+94
+57
+75
+74
+61
+48
+58
+59
+194
+173
+157
+255
+215
+190
+255
+215
+190
+255
+215
+190
+234
+204
+183
+120
+114
+108
+43
+57
+62
+69
+69
+61
+100
+89
+56
+129
+106
+52
+137
+110
+49
+137
+110
+49
+129
+106
+52
+105
+93
+60
+69
+69
+61
+48
+58
+59
+77
+85
+81
+51
+62
+63
+137
+110
+49
+168
+127
+42
+158
+125
+46
+168
+127
+42
+137
+110
+49
+51
+62
+63
+187
+166
+150
+187
+166
+150
+48
+58
+59
+75
+74
+61
+111
+94
+57
+95
+87
+59
+56
+64
+60
+99
+90
+79
+239
+182
+144
+252
+185
+144
+245
+179
+138
+252
+185
+144
+249
+189
+146
+236
+186
+153
+137
+127
+115
+55
+66
+67
+56
+64
+60
+83
+78
+61
+111
+94
+57
+129
+106
+52
+137
+110
+49
+137
+110
+49
+129
+106
+52
+117
+98
+55
+95
+87
+59
+69
+69
+61
+51
+62
+63
+63
+74
+74
+133
+120
+107
+236
+186
+153
+250
+197
+158
+251
+192
+154
+251
+192
+154
+250
+197
+158
+124
+111
+99
+51
+62
+63
+112
+85
+63
+146
+97
+64
+106
+82
+65
+48
+58
+59
+120
+114
+108
+101
+100
+92
+48
+58
+59
+95
+78
+64
+146
+97
+64
+183
+110
+59
+188
+112
+56
+173
+106
+60
+139
+96
+61
+89
+75
+66
+48
+58
+59
+77
+85
+81
+186
+157
+134
+245
+179
+138
+245
+169
+119
+245
+162
+103
+246
+156
+93
+246
+156
+93
+246
+156
+93
+247
+165
+111
+249
+174
+124
+249
+189
+146
+154
+133
+118
+58
+69
+70
+51
+62
+63
+95
+78
+64
+139
+96
+61
+173
+106
+60
+183
+110
+59
+183
+110
+59
+173
+106
+60
+139
+96
+61
+95
+78
+64
+51
+62
+63
+63
+74
+74
+167
+142
+123
+249
+189
+146
+249
+174
+124
+247
+165
+111
+246
+156
+93
+246
+156
+93
+246
+156
+93
+245
+162
+103
+245
+169
+119
+245
+179
+138
+178
+146
+122
+70
+79
+77
+48
+58
+59
+89
+75
+66
+139
+96
+61
+173
+106
+60
+188
+112
+56
+183
+110
+59
+155
+100
+63
+95
+78
+64
+48
+58
+59
+101
+100
+92
+146
+135
+124
+48
+58
+59
+95
+78
+64
+146
+97
+64
+125
+90
+64
+62
+63
+61
+101
+100
+92
+245
+212
+186
+137
+127
+115
+48
+58
+59
+106
+82
+65
+146
+97
+64
+106
+82
+65
+48
+58
+59
+124
+111
+99
+247
+165
+111
+247
+150
+84
+241
+138
+68
+241
+132
+59
+247
+130
+53
+247
+130
+53
+242
+133
+67
+241
+145
+79
+245
+162
+103
+250
+176
+132
+203
+161
+131
+91
+92
+89
+43
+57
+62
+81
+73
+62
+135
+94
+64
+173
+106
+60
+188
+112
+56
+183
+110
+59
+155
+100
+63
+106
+82
+65
+51
+62
+63
+91
+92
+89
+133
+120
+107
+48
+58
+59
+95
+78
+64
+146
+97
+64
+118
+86
+65
+56
+64
+60
+101
+100
+92
+245
+212
+186
+253
+212
+188
+146
+135
+124
+48
+58
+59
+118
+86
+65
+183
+110
+59
+173
+106
+60
+95
+78
+64
+43
+57
+62
+186
+157
+134
+250
+197
+158
+251
+192
+154
+250
+197
+158
+250
+200
+166
+172
+150
+134
+70
+79
+77
+48
+58
+59
+89
+75
+66
+135
+94
+64
+163
+104
+61
+183
+110
+59
+183
+110
+59
+173
+106
+60
+146
+97
+64
+95
+78
+64
+56
+64
+60
+55
+66
+67
+150
+125
+114
+236
+186
+153
+251
+192
+154
+249
+189
+146
+249
+189
+146
+251
+192
+154
+195
+157
+134
+51
+62
+63
+76
+70
+64
+139
+96
+61
+125
+90
+64
+65
+67
+64
+76
+78
+76
+234
+168
+124
+249
+159
+103
+247
+150
+84
+243
+141
+78
+247
+143
+74
+247
+150
+84
+249
+159
+103
+250
+176
+132
+250
+197
+158
+255
+215
+190
+207
+178
+158
+84
+85
+82
+48
+58
+59
+89
+75
+66
+146
+97
+64
+173
+106
+60
+183
+110
+59
+183
+110
+59
+163
+104
+61
+118
+86
+65
+62
+63
+61
+58
+69
+70
+63
+74
+74
+81
+73
+62
+227
+126
+50
+227
+126
+50
+224
+123
+55
+234
+126
+45
+135
+94
+64
+58
+69
+70
+251
+192
+154
+245
+169
+119
+249
+146
+83
+247
+130
+53
+238
+116
+34
+235
+107
+16
+243
+101
+2
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+246
+97
+3
+246
+97
+3
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+243
+101
+2
+236
+102
+14
+236
+102
+14
+235
+107
+16
+246
+116
+28
+239
+117
+44
+241
+132
+59
+247
+143
+74
+249
+152
+92
+214
+151
+109
+118
+86
+65
+146
+111
+88
+192
+155
+91
+192
+155
+91
+195
+167
+113
+239
+227
+208
+255
+238
+227
+255
+238
+227
+255
+238
+227
+255
+238
+227
+255
+238
+227
+255
+238
+227
+255
+238
+227
+255
+238
+227
+255
+238
+227
+255
+238
+227
+255
+238
+227
+255
+238
+227
+255
+238
+227
+255
+238
+227
+216
+194
+154
+192
+155
+91
+192
+155
+91
+192
+155
+91
+146
+111
+88
+162
+125
+96
+250
+176
+132
+245
+169
+119
+247
+165
+111
+249
+159
+103
+246
+156
+93
+247
+150
+84
+243
+141
+78
+243
+141
+78
+243
+141
+78
+241
+145
+79
+247
+150
+84
+249
+159
+103
+245
+169
+119
+187
+140
+108
+89
+84
+82
+48
+58
+59
+48
+58
+59
+91
+92
+89
+194
+173
+157
+255
+215
+190
+207
+178
+158
+109
+106
+99
+51
+62
+63
+48
+58
+59
+51
+62
+63
+48
+58
+59
+48
+58
+59
+55
+66
+67
+124
+111
+99
+203
+161
+131
+248
+180
+134
+245
+169
+119
+249
+159
+103
+247
+150
+84
+243
+141
+78
+243
+141
+78
+243
+141
+78
+247
+150
+84
+249
+159
+103
+245
+169
+119
+248
+180
+134
+219
+170
+138
+154
+133
+118
+84
+85
+82
+51
+62
+63
+48
+58
+59
+51
+62
+63
+51
+62
+63
+48
+58
+59
+48
+58
+59
+55
+66
+67
+91
+92
+89
+154
+133
+118
+209
+171
+139
+245
+179
+138
+249
+174
+124
+247
+165
+111
+249
+159
+103
+246
+156
+93
+246
+156
+93
+249
+159
+103
+247
+165
+111
+249
+174
+124
+252
+185
+144
+195
+157
+134
+109
+106
+99
+55
+66
+67
+48
+58
+59
+51
+62
+63
+51
+62
+63
+48
+58
+59
+51
+62
+63
+109
+106
+99
+207
+178
+158
+255
+215
+190
+217
+187
+166
+91
+92
+89
+51
+62
+63
+48
+58
+59
+76
+78
+76
+172
+150
+134
+253
+212
+188
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+255
+215
+190
+194
+173
+157
+101
+100
+92
+51
+62
+63
+48
+58
+59
+48
+58
+59
+51
+62
+63
+48
+58
+59
+48
+58
+59
+97
+98
+96
+194
+173
+157
+146
+135
+124
+56
+64
+60
+145
+114
+49
+168
+127
+42
+158
+125
+46
+168
+127
+42
+129
+106
+52
+48
+58
+59
+194
+173
+157
+255
+215
+190
+176
+156
+141
+76
+78
+76
+48
+58
+59
+55
+66
+67
+115
+102
+92
+234
+168
+124
+245
+169
+119
+247
+165
+111
+247
+165
+111
+247
+165
+111
+245
+169
+119
+249
+174
+124
+245
+179
+138
+209
+171
+139
+144
+125
+110
+76
+78
+76
+48
+58
+59
+48
+58
+59
+51
+62
+63
+51
+62
+63
+48
+58
+59
+48
+58
+59
+58
+69
+70
+101
+100
+92
+154
+133
+118
+219
+170
+138
+252
+185
+144
+248
+180
+134
+249
+174
+124
+245
+169
+119
+249
+174
+124
+250
+176
+132
+230
+173
+136
+124
+111
+99
+55
+66
+67
+43
+57
+62
+58
+69
+70
+137
+127
+115
+245
+212
+186
+245
+212
+186
+161
+144
+134
+70
+79
+77
+43
+57
+62
+51
+62
+63
+51
+62
+63
+48
+58
+59
+43
+57
+62
+84
+85
+82
+154
+133
+118
+240
+181
+138
+249
+174
+124
+247
+165
+111
+249
+152
+92
+243
+141
+78
+241
+138
+68
+242
+133
+67
+241
+138
+68
+241
+145
+79
+246
+156
+93
+247
+165
+111
+250
+176
+132
+219
+170
+138
+144
+125
+110
+77
+85
+81
+43
+57
+62
+48
+58
+59
+48
+58
+59
+51
+62
+63
+48
+58
+59
+43
+57
+62
+77
+85
+81
+150
+125
+114
+219
+170
+138
+250
+176
+132
+247
+165
+111
+246
+156
+93
+241
+145
+79
+241
+138
+68
+241
+138
+68
+241
+138
+68
+243
+141
+78
+249
+152
+92
+247
+165
+111
+250
+176
+132
+230
+173
+136
+154
+133
+118
+77
+85
+81
+43
+57
+62
+48
+58
+59
+51
+62
+63
+48
+58
+59
+43
+57
+62
+70
+79
+77
+161
+144
+134
+245
+212
+186
+255
+215
+190
+161
+144
+134
+63
+74
+74
+43
+57
+62
+51
+62
+63
+109
+106
+99
+217
+187
+166
+251
+209
+178
+238
+205
+179
+137
+127
+115
+58
+69
+70
+43
+57
+62
+58
+69
+70
+139
+115
+96
+238
+159
+107
+249
+152
+92
+241
+138
+68
+247
+130
+53
+238
+123
+45
+239
+117
+44
+247
+118
+39
+238
+123
+45
+241
+132
+59
+241
+145
+79
+249
+159
+103
+249
+174
+124
+240
+181
+138
+167
+142
+123
+91
+92
+89
+43
+57
+62
+48
+58
+59
+51
+62
+63
+48
+58
+59
+43
+57
+62
+63
+74
+74
+137
+127
+115
+234
+204
+183
+255
+215
+190
+146
+135
+124
+63
+74
+74
+43
+57
+62
+51
+62
+63
+115
+102
+92
+236
+186
+153
+251
+192
+154
+251
+192
+154
+236
+186
+153
+133
+120
+107
+43
+57
+62
+48
+58
+59
+48
+58
+59
+55
+66
+67
+158
+130
+108
+248
+180
+134
+250
+176
+132
+249
+174
+124
+249
+174
+124
+250
+176
+132
+252
+185
+144
+239
+182
+144
+154
+133
+118
+84
+85
+82
+43
+57
+62
+48
+58
+59
+48
+58
+59
+51
+62
+63
+48
+58
+59
+43
+57
+62
+70
+79
+77
+133
+120
+107
+219
+170
+138
+245
+179
+138
+250
+176
+132
+245
+169
+119
+247
+165
+111
+247
+165
+111
+245
+169
+119
+249
+174
+124
+187
+140
+108
+81
+77
+76
+43
+57
+62
+43
+57
+62
+99
+90
+79
+214
+151
+109
+249
+159
+103
+247
+150
+84
+247
+143
+74
+241
+138
+68
+241
+138
+68
+249
+146
+83
+249
+159
+103
+250
+176
+132
+250
+197
+158
+255
+215
+190
+255
+215
+190
+245
+212
+186
+161
+144
+134
+77
+85
+81
+43
+57
+62
+48
+58
+59
+51
+62
+63
+48
+58
+59
+41
+58
+57
+55
+66
+67
+120
+114
+108
+217
+187
+166
+97
+98
+96
+95
+78
+64
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+125
+52
+112
+85
+63
+70
+79
+77
+249
+189
+146
+247
+165
+111
+243
+141
+78
+247
+130
+53
+238
+116
+34
+236
+102
+14
+243
+101
+2
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+235
+94
+9
+235
+94
+9
+236
+102
+14
+235
+107
+16
+236
+108
+29
+239
+117
+44
+238
+123
+53
+242
+133
+67
+241
+145
+79
+241
+153
+96
+247
+165
+111
+249
+174
+124
+250
+176
+132
+245
+179
+138
+252
+185
+144
+249
+189
+146
+249
+189
+146
+249
+189
+146
+249
+189
+146
+249
+189
+146
+249
+189
+146
+249
+189
+146
+249
+189
+146
+249
+189
+146
+249
+189
+146
+249
+189
+146
+249
+189
+146
+249
+189
+146
+249
+189
+146
+252
+185
+144
+245
+179
+138
+250
+176
+132
+249
+174
+124
+245
+169
+119
+245
+162
+103
+241
+153
+96
+241
+145
+86
+243
+141
+78
+241
+138
+68
+242
+133
+67
+241
+132
+59
+238
+123
+53
+238
+123
+53
+238
+123
+53
+241
+132
+59
+242
+133
+67
+243
+141
+78
+241
+145
+86
+249
+159
+103
+238
+159
+107
+210
+156
+119
+210
+156
+119
+240
+181
+138
+249
+189
+146
+251
+192
+154
+251
+192
+154
+250
+197
+158
+212
+173
+150
+186
+157
+134
+167
+142
+123
+167
+142
+123
+195
+157
+134
+219
+170
+138
+248
+180
+134
+245
+169
+119
+245
+162
+103
+247
+150
+84
+243
+141
+78
+241
+132
+59
+238
+123
+53
+238
+123
+53
+238
+123
+53
+241
+132
+59
+241
+138
+68
+247
+150
+84
+245
+162
+103
+245
+169
+119
+250
+176
+132
+239
+182
+144
+219
+170
+138
+186
+157
+134
+167
+142
+123
+167
+142
+123
+172
+150
+134
+195
+157
+134
+219
+170
+138
+239
+182
+144
+248
+180
+134
+245
+169
+119
+245
+162
+103
+241
+153
+96
+241
+145
+79
+241
+138
+68
+241
+138
+68
+241
+138
+68
+241
+138
+68
+241
+145
+79
+241
+153
+96
+247
+165
+111
+249
+174
+124
+245
+179
+138
+219
+170
+138
+186
+157
+134
+167
+142
+123
+167
+142
+123
+186
+157
+134
+212
+173
+150
+250
+197
+158
+251
+192
+154
+251
+192
+154
+249
+189
+146
+239
+182
+144
+219
+170
+138
+219
+170
+138
+239
+182
+144
+250
+197
+158
+250
+200
+166
+251
+209
+178
+238
+205
+179
+172
+150
+134
+137
+127
+115
+161
+144
+134
+217
+187
+166
+253
+212
+188
+227
+196
+175
+194
+173
+157
+176
+156
+141
+172
+150
+134
+187
+166
+150
+217
+187
+166
+255
+215
+190
+245
+212
+186
+76
+78
+76
+75
+74
+61
+158
+125
+46
+158
+125
+46
+158
+125
+46
+171
+129
+45
+105
+93
+60
+58
+69
+70
+217
+187
+166
+255
+215
+190
+253
+204
+176
+236
+186
+153
+210
+156
+119
+210
+156
+119
+247
+165
+111
+249
+159
+103
+249
+152
+92
+241
+145
+86
+243
+141
+78
+241
+145
+79
+247
+150
+84
+241
+153
+96
+245
+162
+103
+245
+169
+119
+248
+180
+134
+239
+182
+144
+209
+171
+139
+186
+157
+134
+167
+142
+123
+167
+142
+123
+178
+146
+122
+195
+157
+134
+230
+173
+136
+239
+182
+144
+250
+176
+132
+245
+169
+119
+247
+165
+111
+249
+159
+103
+241
+153
+96
+249
+152
+92
+249
+152
+92
+241
+153
+96
+245
+162
+103
+247
+165
+111
+210
+156
+119
+210
+156
+119
+230
+173
+136
+249
+189
+146
+249
+189
+146
+251
+192
+154
+250
+197
+158
+236
+186
+153
+203
+161
+131
+167
+142
+123
+167
+142
+123
+178
+146
+122
+203
+161
+131
+240
+181
+138
+249
+174
+124
+247
+165
+111
+241
+153
+96
+243
+141
+78
+242
+133
+67
+238
+123
+53
+238
+123
+45
+238
+123
+45
+238
+123
+45
+241
+132
+59
+241
+138
+68
+241
+145
+86
+249
+159
+103
+245
+169
+119
+250
+176
+132
+240
+181
+138
+209
+171
+139
+178
+146
+122
+167
+142
+123
+167
+142
+123
+186
+157
+134
+209
+171
+139
+240
+181
+138
+250
+176
+132
+245
+169
+119
+249
+159
+103
+241
+145
+86
+241
+138
+68
+241
+132
+59
+238
+123
+45
+238
+123
+45
+238
+123
+45
+247
+130
+53
+242
+133
+67
+241
+145
+79
+241
+153
+96
+247
+165
+111
+250
+176
+132
+240
+181
+138
+203
+161
+131
+178
+146
+122
+167
+142
+123
+167
+142
+123
+195
+157
+134
+236
+186
+153
+251
+192
+154
+251
+192
+154
+249
+189
+146
+249
+189
+146
+230
+173
+136
+203
+161
+131
+219
+170
+138
+245
+179
+138
+245
+179
+138
+245
+179
+138
+245
+179
+138
+248
+180
+134
+234
+168
+124
+214
+151
+109
+214
+151
+109
+245
+162
+103
+241
+145
+86
+241
+138
+68
+238
+123
+53
+239
+117
+44
+238
+116
+34
+236
+108
+29
+236
+108
+29
+238
+116
+34
+238
+123
+45
+241
+132
+59
+243
+141
+78
+241
+153
+96
+247
+165
+111
+249
+174
+124
+240
+181
+138
+209
+171
+139
+178
+146
+122
+167
+142
+123
+167
+142
+123
+195
+157
+134
+236
+186
+153
+250
+197
+158
+251
+192
+154
+249
+189
+146
+249
+189
+146
+230
+173
+136
+210
+156
+119
+210
+156
+119
+250
+176
+132
+249
+174
+124
+249
+174
+124
+249
+174
+124
+249
+174
+124
+250
+176
+132
+210
+156
+119
+162
+125
+96
+162
+125
+96
+214
+151
+109
+247
+165
+111
+245
+162
+103
+241
+153
+96
+241
+153
+96
+241
+153
+96
+249
+159
+103
+247
+165
+111
+245
+169
+119
+250
+176
+132
+240
+181
+138
+209
+171
+139
+186
+157
+134
+167
+142
+123
+167
+142
+123
+178
+146
+122
+203
+161
+131
+239
+182
+144
+248
+180
+134
+245
+169
+119
+245
+162
+103
+241
+153
+96
+241
+145
+86
+241
+145
+86
+241
+145
+86
+247
+150
+84
+241
+153
+96
+245
+162
+103
+238
+159
+107
+204
+141
+99
+214
+151
+109
+241
+153
+96
+249
+152
+92
+243
+141
+78
+242
+133
+67
+241
+132
+59
+241
+132
+59
+241
+138
+68
+241
+145
+79
+245
+162
+103
+248
+180
+134
+212
+173
+150
+146
+135
+124
+137
+127
+115
+176
+156
+141
+234
+204
+183
+253
+212
+188
+217
+187
+166
+187
+166
+150
+172
+150
+134
+176
+156
+141
+194
+173
+157
+234
+204
+183
+255
+215
+190
+194
+173
+157
+43
+57
+62
+139
+96
+61
+234
+126
+45
+224
+123
+55
+227
+126
+50
+227
+126
+50
+89
+75
+66
+101
+100
+92
+245
+179
+138
+245
+162
+103
+241
+138
+68
+238
+123
+45
+236
+108
+29
+236
+102
+14
+235
+94
+9
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+235
+94
+9
+235
+94
+9
+236
+102
+14
+235
+107
+16
+236
+108
+29
+238
+116
+34
+238
+123
+45
+241
+132
+59
+241
+138
+68
+241
+145
+79
+249
+152
+92
+241
+153
+96
+245
+162
+103
+245
+162
+103
+247
+165
+111
+247
+165
+111
+247
+165
+111
+247
+165
+111
+247
+165
+111
+247
+165
+111
+247
+165
+111
+247
+165
+111
+247
+165
+111
+247
+165
+111
+247
+165
+111
+247
+165
+111
+247
+165
+111
+247
+165
+111
+245
+162
+103
+245
+162
+103
+241
+153
+96
+241
+153
+96
+241
+145
+86
+243
+141
+78
+241
+138
+68
+241
+132
+59
+238
+123
+53
+238
+123
+45
+239
+117
+44
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+239
+117
+44
+238
+123
+45
+238
+123
+53
+241
+132
+59
+243
+141
+78
+241
+145
+86
+241
+153
+96
+245
+162
+103
+245
+162
+103
+247
+165
+111
+247
+165
+111
+245
+169
+119
+245
+169
+119
+245
+169
+119
+249
+174
+124
+245
+169
+119
+245
+169
+119
+245
+169
+119
+247
+165
+111
+241
+153
+96
+241
+145
+86
+243
+141
+78
+241
+132
+59
+238
+123
+53
+239
+117
+44
+238
+116
+34
+238
+116
+34
+238
+116
+34
+239
+117
+44
+238
+123
+45
+241
+132
+59
+241
+138
+68
+241
+145
+86
+241
+153
+96
+245
+162
+103
+245
+169
+119
+249
+174
+124
+250
+176
+132
+250
+176
+132
+250
+176
+132
+249
+174
+124
+245
+169
+119
+247
+165
+111
+241
+153
+96
+241
+145
+86
+243
+141
+78
+242
+133
+67
+241
+132
+59
+238
+123
+45
+238
+123
+45
+238
+123
+45
+238
+123
+45
+241
+132
+59
+242
+133
+67
+243
+141
+78
+249
+152
+92
+245
+162
+103
+247
+165
+111
+245
+169
+119
+245
+169
+119
+245
+169
+119
+245
+169
+119
+245
+169
+119
+245
+169
+119
+245
+169
+119
+247
+165
+111
+247
+165
+111
+247
+165
+111
+247
+165
+111
+245
+169
+119
+249
+174
+124
+245
+179
+138
+251
+192
+154
+232
+190
+161
+101
+100
+92
+51
+62
+63
+63
+69
+60
+51
+62
+63
+55
+66
+67
+109
+106
+99
+176
+156
+141
+234
+204
+183
+255
+215
+190
+255
+215
+190
+255
+215
+190
+245
+212
+186
+207
+178
+158
+91
+92
+89
+51
+62
+63
+129
+106
+52
+168
+127
+42
+158
+125
+46
+158
+125
+46
+168
+127
+42
+75
+74
+61
+91
+92
+89
+245
+212
+186
+250
+200
+166
+252
+185
+144
+249
+174
+124
+247
+165
+111
+241
+153
+96
+241
+145
+79
+241
+138
+68
+242
+133
+67
+241
+132
+59
+238
+123
+53
+241
+132
+59
+241
+132
+59
+241
+138
+68
+243
+141
+78
+241
+145
+86
+241
+153
+96
+247
+165
+111
+245
+169
+119
+249
+174
+124
+250
+176
+132
+250
+176
+132
+249
+174
+124
+249
+174
+124
+245
+169
+119
+245
+162
+103
+241
+153
+96
+241
+145
+86
+241
+145
+79
+241
+138
+68
+242
+133
+67
+242
+133
+67
+242
+133
+67
+241
+138
+68
+243
+141
+78
+241
+145
+86
+241
+153
+96
+241
+153
+96
+245
+162
+103
+245
+162
+103
+247
+165
+111
+245
+169
+119
+245
+169
+119
+245
+169
+119
+245
+169
+119
+245
+169
+119
+245
+169
+119
+245
+169
+119
+247
+165
+111
+245
+162
+103
+241
+153
+96
+241
+145
+79
+241
+138
+68
+238
+123
+53
+238
+123
+45
+238
+116
+34
+235
+113
+30
+235
+113
+30
+238
+116
+34
+239
+117
+44
+238
+123
+45
+241
+132
+59
+241
+138
+68
+241
+145
+86
+241
+153
+96
+245
+162
+103
+245
+169
+119
+245
+169
+119
+249
+174
+124
+249
+174
+124
+245
+169
+119
+245
+169
+119
+245
+162
+103
+241
+153
+96
+241
+145
+86
+241
+138
+68
+241
+132
+59
+238
+123
+45
+239
+117
+44
+238
+116
+34
+235
+113
+30
+235
+113
+30
+238
+116
+34
+238
+123
+45
+241
+132
+59
+241
+138
+68
+241
+145
+86
+241
+153
+96
+245
+162
+103
+247
+165
+111
+245
+169
+119
+245
+169
+119
+245
+169
+119
+245
+169
+119
+245
+169
+119
+245
+169
+119
+247
+165
+111
+247
+165
+111
+247
+165
+111
+245
+162
+103
+245
+162
+103
+245
+162
+103
+245
+162
+103
+245
+162
+103
+245
+162
+103
+245
+162
+103
+245
+162
+103
+241
+153
+96
+241
+153
+96
+241
+145
+86
+243
+141
+78
+241
+132
+59
+238
+123
+53
+239
+117
+44
+235
+113
+30
+236
+108
+29
+235
+107
+16
+235
+107
+16
+236
+108
+29
+235
+113
+30
+239
+117
+44
+238
+123
+53
+242
+133
+67
+241
+145
+79
+241
+153
+96
+245
+162
+103
+247
+165
+111
+245
+169
+119
+245
+169
+119
+249
+174
+124
+245
+169
+119
+245
+169
+119
+245
+169
+119
+245
+169
+119
+247
+165
+111
+247
+165
+111
+245
+162
+103
+245
+162
+103
+241
+153
+96
+241
+153
+96
+241
+153
+96
+241
+153
+96
+241
+153
+96
+241
+153
+96
+241
+153
+96
+241
+153
+96
+241
+153
+96
+241
+153
+96
+249
+152
+92
+241
+145
+86
+243
+141
+78
+241
+138
+68
+241
+138
+68
+241
+138
+68
+241
+138
+68
+243
+141
+78
+241
+145
+86
+241
+153
+96
+245
+162
+103
+245
+169
+119
+245
+169
+119
+249
+174
+124
+249
+174
+124
+249
+174
+124
+245
+169
+119
+247
+165
+111
+241
+153
+96
+241
+145
+86
+243
+141
+78
+241
+138
+68
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+138
+68
+243
+141
+78
+241
+145
+79
+241
+145
+79
+241
+145
+79
+243
+141
+78
+241
+138
+68
+241
+132
+59
+238
+123
+53
+238
+123
+53
+238
+123
+53
+242
+133
+67
+241
+145
+86
+247
+165
+111
+210
+156
+119
+63
+74
+74
+62
+63
+61
+69
+69
+61
+48
+58
+59
+63
+74
+74
+133
+120
+107
+194
+173
+157
+245
+212
+186
+255
+215
+190
+255
+215
+190
+255
+215
+190
+245
+212
+186
+176
+156
+141
+55
+66
+67
+76
+70
+64
+212
+120
+56
+227
+126
+50
+224
+123
+55
+234
+125
+52
+194
+112
+58
+56
+64
+60
+154
+133
+118
+250
+176
+132
+241
+153
+96
+242
+133
+67
+239
+117
+44
+236
+108
+29
+236
+102
+14
+235
+94
+9
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+235
+94
+9
+235
+94
+9
+236
+102
+14
+236
+102
+14
+236
+108
+29
+235
+113
+30
+239
+117
+44
+238
+123
+45
+238
+123
+53
+241
+132
+59
+241
+138
+68
+241
+138
+68
+243
+141
+78
+243
+141
+78
+241
+145
+79
+241
+145
+79
+241
+145
+79
+241
+145
+79
+241
+145
+79
+241
+145
+79
+241
+145
+79
+241
+145
+79
+241
+145
+79
+241
+145
+79
+241
+145
+79
+243
+141
+78
+243
+141
+78
+243
+141
+78
+241
+138
+68
+241
+138
+68
+241
+132
+59
+241
+132
+59
+238
+123
+53
+238
+123
+45
+238
+116
+34
+238
+116
+34
+236
+108
+29
+236
+108
+29
+235
+107
+16
+235
+107
+16
+235
+107
+16
+236
+108
+29
+236
+108
+29
+235
+113
+30
+238
+116
+34
+238
+123
+45
+238
+123
+53
+241
+132
+59
+242
+133
+67
+241
+138
+68
+243
+141
+78
+243
+141
+78
+241
+145
+79
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+86
+243
+141
+78
+241
+138
+68
+241
+132
+59
+238
+123
+53
+239
+117
+44
+238
+116
+34
+236
+108
+29
+236
+108
+29
+235
+107
+16
+235
+107
+16
+236
+108
+29
+238
+116
+34
+239
+117
+44
+238
+123
+45
+241
+132
+59
+241
+138
+68
+243
+141
+78
+241
+145
+86
+249
+152
+92
+241
+153
+96
+241
+153
+96
+241
+153
+96
+249
+152
+92
+241
+145
+86
+243
+141
+78
+241
+138
+68
+241
+132
+59
+238
+123
+53
+238
+123
+45
+238
+116
+34
+235
+113
+30
+236
+108
+29
+236
+108
+29
+235
+113
+30
+238
+116
+34
+238
+123
+45
+238
+123
+53
+241
+132
+59
+241
+138
+68
+241
+145
+79
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+79
+241
+145
+79
+241
+145
+79
+241
+145
+86
+241
+153
+96
+245
+162
+103
+245
+169
+119
+245
+179
+138
+144
+125
+110
+51
+62
+63
+117
+98
+55
+158
+125
+46
+145
+114
+49
+105
+93
+60
+69
+69
+61
+48
+58
+59
+58
+69
+70
+91
+92
+89
+120
+114
+108
+120
+114
+108
+91
+92
+89
+48
+58
+59
+56
+64
+60
+123
+102
+54
+171
+129
+45
+158
+125
+46
+158
+125
+46
+168
+127
+42
+137
+110
+49
+48
+58
+59
+161
+144
+134
+250
+197
+158
+248
+180
+134
+247
+165
+111
+241
+153
+96
+241
+145
+79
+241
+138
+68
+241
+132
+59
+238
+123
+53
+238
+123
+45
+239
+117
+44
+238
+116
+34
+238
+116
+34
+239
+117
+44
+238
+123
+45
+238
+123
+53
+241
+132
+59
+241
+138
+68
+243
+141
+78
+241
+145
+86
+249
+152
+92
+241
+153
+96
+241
+153
+96
+241
+153
+96
+241
+145
+86
+241
+145
+86
+243
+141
+78
+241
+138
+68
+241
+132
+59
+238
+123
+53
+238
+123
+45
+238
+123
+45
+239
+117
+44
+238
+123
+45
+238
+123
+45
+238
+123
+53
+241
+132
+59
+241
+132
+59
+241
+138
+68
+241
+138
+68
+243
+141
+78
+241
+145
+79
+241
+145
+79
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+79
+243
+141
+78
+242
+133
+67
+241
+132
+59
+238
+123
+45
+238
+116
+34
+235
+113
+30
+236
+108
+29
+235
+107
+16
+235
+107
+16
+235
+107
+16
+236
+108
+29
+235
+113
+30
+239
+117
+44
+238
+123
+45
+241
+132
+59
+241
+138
+68
+243
+141
+78
+241
+145
+86
+241
+145
+86
+241
+153
+96
+241
+153
+96
+241
+145
+86
+241
+145
+86
+243
+141
+78
+241
+138
+68
+241
+132
+59
+238
+123
+45
+239
+117
+44
+235
+113
+30
+236
+108
+29
+235
+107
+16
+235
+107
+16
+235
+107
+16
+236
+108
+29
+235
+113
+30
+239
+117
+44
+238
+123
+45
+241
+132
+59
+242
+133
+67
+243
+141
+78
+241
+145
+79
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+79
+241
+145
+79
+243
+141
+78
+243
+141
+78
+243
+141
+78
+243
+141
+78
+241
+138
+68
+241
+138
+68
+241
+138
+68
+241
+138
+68
+241
+138
+68
+241
+138
+68
+242
+133
+67
+241
+132
+59
+238
+123
+53
+238
+123
+45
+238
+116
+34
+236
+108
+29
+235
+107
+16
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+235
+107
+16
+236
+108
+29
+238
+116
+34
+238
+123
+45
+238
+123
+53
+242
+133
+67
+241
+138
+68
+241
+145
+79
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+86
+241
+145
+79
+243
+141
+78
+243
+141
+78
+241
+138
+68
+241
+138
+68
+241
+138
+68
+242
+133
+67
+242
+133
+67
+242
+133
+67
+241
+138
+68
+241
+138
+68
+241
+138
+68
+241
+138
+68
+242
+133
+67
+241
+132
+59
+241
+132
+59
+238
+123
+53
+238
+123
+45
+238
+123
+45
+238
+123
+45
+238
+123
+45
+238
+123
+53
+241
+132
+59
+241
+138
+68
+243
+141
+78
+241
+145
+86
+241
+145
+86
+241
+153
+96
+241
+153
+96
+241
+145
+86
+241
+145
+86
+243
+141
+78
+241
+138
+68
+241
+132
+59
+238
+123
+53
+238
+123
+45
+239
+117
+44
+239
+117
+44
+239
+117
+44
+239
+117
+44
+238
+123
+45
+238
+123
+53
+238
+123
+53
+241
+132
+59
+241
+132
+59
+238
+123
+53
+238
+123
+45
+239
+117
+44
+239
+117
+44
+239
+117
+44
+238
+123
+53
+242
+133
+67
+241
+145
+86
+238
+159
+107
+84
+85
+82
+69
+69
+61
+188
+112
+56
+214
+121
+50
+173
+106
+60
+112
+85
+63
+62
+63
+61
+41
+58
+57
+63
+74
+74
+97
+98
+96
+120
+114
+108
+109
+106
+99
+77
+85
+81
+41
+58
+57
+81
+73
+62
+194
+112
+58
+234
+125
+52
+224
+123
+55
+224
+123
+55
+234
+126
+45
+125
+90
+64
+51
+62
+63
+209
+171
+139
+245
+169
+119
+241
+145
+86
+241
+132
+59
+238
+116
+34
+235
+107
+16
+236
+102
+14
+235
+94
+9
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+237
+95
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+230
+97
+5
+235
+94
+9
+235
+94
+9
+236
+102
+14
+235
+107
+16
+236
+108
+29
+235
+113
+30
+238
+116
+34
+239
+117
+44
+238
+123
+45
+238
+123
+45
+238
+123
+45
+238
+123
+53
+238
+123
+53
+238
+123
+53
+238
+123
+53
+238
+123
+53
+238
+123
+53
+238
+123
+53
+238
+123
+53
+238
+123
+53
+238
+123
+53
+238
+123
+53
+238
+123
+53
+238
+123
+53
+238
+123
+53
+238
+123
+45
+238
+123
+45
+239
+117
+44
+239
+117
+44
+238
+116
+34
+235
+113
+30
+236
+108
+29
+235
+107
+16
+235
+107
+16
+236
+102
+14
+236
+102
+14
+235
+94
+9
+235
+94
+9
+235
+94
+9
+236
+102
+14
+236
+102
+14
+235
+107
+16
+236
+108
+29
+236
+108
+29
+238
+116
+34
+239
+117
+44
+239
+117
+44
+238
+123
+45
+238
+123
+45
+238
+123
+53
+238
+123
+53
+238
+123
+53
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+238
+123
+53
+238
+123
+53
+238
+123
+45
+239
+117
+44
+238
+116
+34
+236
+108
+29
+235
+107
+16
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+235
+107
+16
+236
+108
+29
+235
+113
+30
+238
+116
+34
+238
+123
+45
+238
+123
+53
+238
+123
+53
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+238
+123
+53
+238
+123
+45
+239
+117
+44
+238
+116
+34
+236
+108
+29
+235
+107
+16
+235
+107
+16
+236
+102
+14
+236
+102
+14
+235
+107
+16
+236
+108
+29
+236
+108
+29
+238
+116
+34
+239
+117
+44
+238
+123
+45
+238
+123
+53
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+238
+123
+53
+238
+123
+53
+238
+123
+53
+238
+123
+53
+241
+132
+59
+241
+138
+68
+241
+145
+86
+238
+159
+107
+234
+168
+124
+84
+85
+82
+83
+78
+61
+171
+129
+45
+158
+125
+46
+168
+127
+42
+168
+127
+42
+158
+125
+46
+129
+106
+52
+100
+89
+56
+83
+78
+61
+75
+74
+61
+69
+69
+61
+83
+78
+61
+105
+93
+60
+152
+119
+47
+168
+127
+42
+158
+125
+46
+158
+125
+46
+161
+127
+40
+168
+127
+42
+75
+74
+61
+63
+74
+74
+236
+186
+153
+245
+179
+138
+238
+159
+107
+241
+145
+86
+241
+138
+68
+241
+132
+59
+238
+123
+45
+238
+116
+34
+235
+113
+30
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+238
+116
+34
+239
+117
+44
+238
+123
+45
+238
+123
+53
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+238
+123
+53
+238
+123
+53
+238
+123
+45
+239
+117
+44
+238
+116
+34
+235
+113
+30
+236
+108
+29
+236
+108
+29
+236
+108
+29
+235
+113
+30
+238
+116
+34
+238
+116
+34
+239
+117
+44
+238
+123
+45
+238
+123
+45
+238
+123
+53
+238
+123
+53
+238
+123
+53
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+238
+123
+53
+238
+123
+45
+239
+117
+44
+238
+116
+34
+235
+113
+30
+236
+108
+29
+236
+102
+14
+236
+102
+14
+236
+102
+14
+235
+94
+9
+236
+102
+14
+236
+102
+14
+235
+107
+16
+236
+108
+29
+235
+113
+30
+238
+116
+34
+238
+123
+45
+238
+123
+53
+238
+123
+53
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+238
+123
+53
+238
+123
+53
+238
+123
+45
+238
+116
+34
+235
+113
+30
+236
+108
+29
+235
+107
+16
+236
+102
+14
+236
+102
+14
+235
+94
+9
+236
+102
+14
+236
+102
+14
+235
+107
+16
+236
+108
+29
+235
+113
+30
+238
+116
+34
+238
+123
+45
+238
+123
+53
+238
+123
+53
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+238
+123
+53
+238
+123
+53
+238
+123
+53
+238
+123
+53
+238
+123
+53
+238
+123
+45
+238
+123
+45
+238
+123
+45
+238
+123
+45
+238
+123
+45
+238
+123
+45
+238
+123
+45
+238
+123
+45
+239
+117
+44
+239
+117
+44
+238
+116
+34
+236
+108
+29
+236
+108
+29
+235
+107
+16
+236
+102
+14
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+236
+102
+14
+236
+102
+14
+235
+107
+16
+236
+108
+29
+238
+116
+34
+239
+117
+44
+238
+123
+45
+238
+123
+53
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+238
+123
+53
+238
+123
+53
+238
+123
+53
+238
+123
+45
+238
+123
+45
+238
+123
+45
+238
+123
+45
+239
+117
+44
+239
+117
+44
+239
+117
+44
+238
+123
+45
+238
+123
+45
+238
+123
+45
+238
+123
+45
+238
+123
+45
+239
+117
+44
+239
+117
+44
+238
+116
+34
+235
+113
+30
+236
+108
+29
+236
+108
+29
+235
+113
+30
+238
+116
+34
+239
+117
+44
+238
+123
+45
+238
+123
+53
+238
+123
+53
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+241
+132
+59
+238
+123
+53
+238
+123
+45
+239
+117
+44
+238
+116
+34
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+235
+113
+30
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+235
+113
+30
+236
+108
+29
+235
+113
+30
+238
+116
+34
+238
+123
+45
+241
+132
+59
+241
+145
+86
+204
+141
+99
+41
+58
+57
+155
+100
+63
+234
+126
+45
+227
+126
+50
+227
+126
+50
+234
+125
+52
+209
+117
+53
+155
+100
+63
+118
+86
+65
+89
+75
+66
+81
+73
+62
+81
+73
+62
+106
+82
+65
+155
+100
+63
+214
+121
+50
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+194
+112
+58
+56
+64
+60
+109
+106
+99
+245
+179
+138
+245
+162
+103
+241
+138
+68
+238
+123
+45
+235
+113
+30
+236
+102
+14
+235
+94
+9
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+235
+94
+9
+235
+94
+9
+235
+94
+9
+236
+102
+14
+236
+102
+14
+235
+107
+16
+235
+107
+16
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+235
+113
+30
+235
+113
+30
+235
+113
+30
+235
+113
+30
+235
+113
+30
+235
+113
+30
+235
+113
+30
+235
+113
+30
+235
+113
+30
+235
+113
+30
+235
+113
+30
+235
+113
+30
+235
+113
+30
+235
+113
+30
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+235
+107
+16
+236
+102
+14
+236
+102
+14
+236
+102
+14
+235
+94
+9
+235
+94
+9
+235
+94
+9
+230
+97
+5
+230
+97
+5
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+236
+102
+14
+236
+102
+14
+235
+107
+16
+236
+108
+29
+236
+108
+29
+236
+108
+29
+235
+113
+30
+235
+113
+30
+235
+113
+30
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+235
+113
+30
+236
+108
+29
+236
+108
+29
+235
+107
+16
+236
+102
+14
+236
+102
+14
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+236
+102
+14
+235
+107
+16
+236
+108
+29
+236
+108
+29
+235
+113
+30
+238
+116
+34
+238
+116
+34
+239
+117
+44
+239
+117
+44
+239
+117
+44
+238
+116
+34
+238
+116
+34
+235
+113
+30
+236
+108
+29
+236
+108
+29
+235
+107
+16
+236
+102
+14
+236
+102
+14
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+236
+102
+14
+236
+102
+14
+235
+107
+16
+236
+108
+29
+236
+108
+29
+235
+113
+30
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+235
+113
+30
+235
+113
+30
+238
+116
+34
+238
+123
+45
+238
+123
+53
+241
+138
+68
+241
+145
+86
+238
+159
+107
+89
+84
+82
+75
+74
+61
+168
+127
+42
+168
+127
+42
+158
+125
+46
+158
+125
+46
+161
+127
+40
+168
+127
+42
+171
+129
+45
+168
+127
+42
+158
+125
+46
+158
+125
+46
+168
+127
+42
+171
+129
+45
+168
+127
+42
+158
+125
+46
+158
+125
+46
+168
+127
+42
+171
+129
+45
+95
+87
+59
+48
+58
+59
+167
+142
+123
+245
+179
+138
+238
+159
+107
+241
+145
+86
+242
+133
+67
+238
+123
+45
+238
+116
+34
+236
+108
+29
+236
+108
+29
+235
+107
+16
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+235
+107
+16
+236
+108
+29
+236
+108
+29
+235
+113
+30
+238
+116
+34
+238
+116
+34
+239
+117
+44
+239
+117
+44
+239
+117
+44
+238
+116
+34
+238
+116
+34
+235
+113
+30
+236
+108
+29
+236
+108
+29
+235
+107
+16
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+235
+107
+16
+235
+107
+16
+236
+108
+29
+236
+108
+29
+236
+108
+29
+235
+113
+30
+235
+113
+30
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+235
+113
+30
+236
+108
+29
+235
+107
+16
+236
+102
+14
+236
+102
+14
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+236
+102
+14
+235
+107
+16
+236
+108
+29
+236
+108
+29
+235
+113
+30
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+235
+113
+30
+236
+108
+29
+236
+108
+29
+235
+107
+16
+236
+102
+14
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+236
+102
+14
+236
+102
+14
+235
+107
+16
+236
+108
+29
+235
+113
+30
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+235
+113
+30
+235
+113
+30
+235
+113
+30
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+235
+107
+16
+235
+107
+16
+236
+102
+14
+236
+102
+14
+235
+94
+9
+235
+94
+9
+235
+94
+9
+230
+97
+5
+235
+94
+9
+235
+94
+9
+235
+94
+9
+236
+102
+14
+236
+102
+14
+235
+107
+16
+236
+108
+29
+235
+113
+30
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+235
+113
+30
+235
+113
+30
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+236
+108
+29
+235
+107
+16
+235
+107
+16
+236
+102
+14
+236
+102
+14
+236
+102
+14
+235
+107
+16
+236
+108
+29
+236
+108
+29
+235
+113
+30
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+238
+116
+34
+235
+113
+30
+236
+108
+29
+236
+108
+29
+235
+107
+16
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+235
+107
+16
+235
+107
+16
+236
+108
+29
+236
+108
+29
+235
+107
+16
+235
+107
+16
+235
+107
+16
+236
+108
+29
+235
+113
+30
+239
+117
+44
+241
+132
+59
+241
+145
+79
+204
+141
+99
+48
+58
+59
+139
+96
+61
+234
+126
+45
+224
+123
+55
+224
+123
+55
+224
+123
+55
+227
+126
+50
+234
+126
+45
+234
+126
+45
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+126
+45
+234
+126
+45
+227
+126
+50
+224
+123
+55
+224
+123
+55
+234
+125
+52
+214
+121
+50
+81
+73
+62
+58
+69
+70
+219
+170
+138
+245
+169
+119
+241
+145
+86
+241
+132
+59
+239
+117
+44
+236
+108
+29
+236
+102
+14
+235
+94
+9
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+230
+97
+5
+230
+97
+5
+235
+94
+9
+230
+97
+5
+229
+102
+7
+229
+102
+7
+236
+102
+14
+236
+102
+14
+224
+98
+18
+224
+98
+18
+224
+98
+18
+236
+102
+14
+224
+98
+18
+236
+102
+14
+236
+102
+14
+224
+98
+18
+224
+98
+18
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+224
+98
+18
+236
+102
+14
+236
+102
+14
+229
+102
+7
+229
+102
+7
+230
+97
+5
+235
+94
+9
+235
+94
+9
+230
+97
+5
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+230
+97
+5
+235
+94
+9
+230
+97
+5
+235
+94
+9
+235
+94
+9
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+236
+102
+14
+224
+98
+18
+236
+102
+14
+235
+94
+9
+235
+94
+9
+235
+94
+9
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+230
+97
+5
+235
+94
+9
+230
+97
+5
+229
+102
+7
+236
+102
+14
+236
+102
+14
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+236
+102
+14
+224
+98
+18
+236
+102
+14
+229
+102
+7
+230
+97
+5
+235
+94
+9
+235
+94
+9
+230
+97
+5
+231
+91
+2
+230
+97
+5
+235
+94
+9
+235
+94
+9
+235
+94
+9
+230
+97
+5
+229
+102
+7
+236
+102
+14
+236
+102
+14
+236
+102
+14
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+236
+102
+14
+224
+98
+18
+236
+102
+14
+235
+107
+16
+236
+108
+29
+239
+117
+44
+234
+125
+52
+231
+136
+72
+241
+153
+96
+162
+125
+96
+48
+58
+59
+95
+87
+59
+158
+125
+46
+171
+129
+45
+168
+127
+42
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+158
+125
+46
+168
+127
+42
+171
+129
+45
+158
+125
+46
+95
+87
+59
+48
+58
+59
+124
+111
+99
+245
+179
+138
+247
+165
+111
+241
+145
+86
+241
+132
+59
+238
+123
+45
+238
+116
+34
+236
+108
+29
+224
+98
+18
+229
+102
+7
+230
+97
+5
+235
+94
+9
+235
+94
+9
+230
+97
+5
+230
+97
+5
+230
+97
+5
+235
+94
+9
+230
+97
+5
+229
+102
+7
+236
+102
+14
+236
+102
+14
+236
+102
+14
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+236
+102
+14
+236
+102
+14
+236
+102
+14
+235
+94
+9
+230
+97
+5
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+236
+102
+14
+236
+102
+14
+236
+102
+14
+224
+98
+18
+224
+98
+18
+236
+102
+14
+236
+102
+14
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+224
+98
+18
+236
+102
+14
+229
+102
+7
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+231
+91
+2
+231
+91
+2
+231
+91
+2
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+229
+102
+7
+236
+102
+14
+224
+98
+18
+236
+102
+14
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+236
+102
+14
+224
+98
+18
+236
+102
+14
+229
+102
+7
+230
+97
+5
+235
+94
+9
+230
+97
+5
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+230
+97
+5
+230
+97
+5
+235
+94
+9
+235
+94
+9
+229
+102
+7
+236
+102
+14
+236
+102
+14
+236
+102
+14
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+236
+102
+14
+235
+107
+16
+236
+102
+14
+224
+98
+18
+224
+98
+18
+236
+102
+14
+224
+98
+18
+224
+98
+18
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+229
+102
+7
+236
+102
+14
+235
+94
+9
+230
+97
+5
+235
+94
+9
+235
+94
+9
+230
+97
+5
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+235
+94
+9
+230
+97
+5
+230
+97
+5
+229
+102
+7
+236
+102
+14
+224
+98
+18
+236
+102
+14
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+236
+102
+14
+236
+102
+14
+236
+102
+14
+224
+98
+18
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+236
+102
+14
+224
+98
+18
+236
+102
+14
+236
+102
+14
+236
+102
+14
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+236
+102
+14
+236
+102
+14
+224
+98
+18
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+235
+107
+16
+236
+102
+14
+236
+102
+14
+236
+102
+14
+229
+102
+7
+230
+97
+5
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+235
+94
+9
+230
+97
+5
+235
+94
+9
+236
+102
+14
+236
+102
+14
+236
+102
+14
+229
+102
+7
+230
+97
+5
+229
+102
+7
+224
+98
+18
+236
+108
+29
+238
+116
+34
+238
+123
+53
+243
+141
+78
+241
+153
+96
+99
+90
+79
+56
+64
+60
+155
+100
+63
+234
+126
+45
+234
+126
+45
+227
+126
+50
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+227
+126
+50
+227
+126
+50
+224
+123
+55
+224
+123
+55
+227
+126
+50
+227
+126
+50
+234
+126
+45
+194
+112
+58
+81
+73
+62
+48
+58
+59
+178
+146
+122
+249
+174
+124
+241
+153
+96
+231
+136
+72
+234
+125
+52
+238
+116
+34
+235
+107
+16
+229
+102
+7
+235
+94
+9
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+229
+102
+7
+236
+102
+14
+235
+113
+30
+239
+117
+44
+230
+128
+60
+236
+147
+85
+238
+159
+107
+139
+115
+96
+48
+58
+59
+69
+69
+61
+111
+94
+57
+145
+114
+49
+158
+125
+46
+168
+127
+42
+171
+129
+45
+168
+127
+42
+168
+127
+42
+168
+127
+42
+168
+127
+42
+171
+129
+45
+168
+127
+42
+152
+119
+47
+117
+98
+55
+69
+69
+61
+48
+58
+59
+144
+125
+110
+240
+181
+138
+247
+165
+111
+236
+147
+85
+242
+133
+67
+238
+123
+45
+235
+113
+30
+235
+107
+16
+236
+102
+14
+230
+97
+5
+230
+97
+5
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+230
+97
+5
+229
+102
+7
+235
+107
+16
+235
+113
+30
+238
+123
+45
+242
+133
+67
+241
+153
+96
+214
+151
+109
+99
+90
+79
+48
+58
+59
+95
+78
+64
+155
+100
+63
+209
+117
+53
+227
+126
+50
+234
+125
+52
+234
+125
+52
+234
+125
+52
+234
+125
+52
+234
+125
+52
+234
+126
+45
+234
+126
+45
+227
+126
+50
+194
+112
+58
+125
+90
+64
+56
+64
+60
+58
+69
+70
+178
+146
+122
+250
+176
+132
+238
+159
+107
+241
+145
+79
+234
+125
+52
+239
+117
+44
+236
+108
+29
+224
+98
+18
+230
+97
+5
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+226
+93
+0
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+226
+93
+0
+226
+93
+0
+226
+93
+0
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+231
+91
+2
+226
+93
+0
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+231
+91
+2
+230
+97
+5
+229
+102
+7
+223
+103
+18
+226
+110
+35
+234
+125
+52
+231
+136
+72
+241
+153
+96
+245
+169
+119
+178
+146
+122
+101
+100
+92
+48
+58
+59
+56
+64
+60
+69
+69
+61
+95
+87
+59
+111
+94
+57
+123
+102
+54
+129
+106
+52
+129
+106
+52
+123
+102
+54
+105
+93
+60
+88
+82
+59
+62
+63
+61
+48
+58
+59
+91
+92
+89
+186
+157
+134
+245
+179
+138
+238
+159
+107
+236
+147
+85
+230
+128
+60
+234
+125
+52
+226
+110
+35
+223
+103
+18
+224
+98
+18
+230
+97
+5
+226
+93
+0
+226
+93
+0
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+226
+93
+0
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+230
+97
+5
+224
+98
+18
+236
+108
+29
+239
+117
+44
+230
+123
+57
+243
+141
+78
+238
+159
+107
+234
+168
+124
+158
+130
+108
+76
+78
+76
+41
+58
+57
+62
+63
+61
+95
+78
+64
+125
+90
+64
+146
+97
+64
+163
+104
+61
+173
+106
+60
+163
+104
+61
+155
+100
+63
+125
+90
+64
+95
+78
+64
+56
+64
+60
+43
+57
+62
+124
+111
+99
+209
+171
+139
+234
+168
+124
+238
+159
+107
+241
+145
+79
+230
+128
+60
+239
+117
+44
+236
+108
+29
+236
+102
+14
+229
+102
+7
+230
+97
+5
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+231
+91
+2
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+226
+93
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+230
+97
+5
+230
+97
+5
+224
+98
+18
+236
+108
+29
+226
+110
+35
+230
+123
+57
+231
+136
+72
+241
+153
+96
+238
+159
+107
+240
+181
+138
+203
+161
+131
+150
+125
+114
+101
+100
+92
+76
+78
+76
+55
+66
+67
+48
+58
+59
+48
+58
+59
+48
+58
+59
+48
+58
+59
+58
+69
+70
+84
+85
+82
+124
+111
+99
+178
+146
+122
+240
+181
+138
+234
+168
+124
+238
+159
+107
+236
+147
+85
+230
+128
+60
+234
+125
+52
+226
+110
+35
+223
+103
+18
+224
+98
+18
+230
+97
+5
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+230
+97
+5
+224
+98
+18
+223
+103
+18
+226
+110
+35
+225
+124
+48
+230
+128
+60
+236
+147
+85
+241
+153
+96
+234
+168
+124
+230
+173
+136
+186
+157
+134
+133
+120
+107
+91
+92
+89
+63
+74
+74
+51
+62
+63
+48
+58
+59
+48
+58
+59
+48
+58
+59
+51
+62
+63
+63
+74
+74
+91
+92
+89
+144
+125
+110
+203
+161
+131
+240
+181
+138
+245
+169
+119
+241
+153
+96
+241
+145
+79
+230
+128
+60
+225
+124
+48
+226
+110
+35
+223
+103
+18
+224
+98
+18
+230
+97
+5
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+230
+97
+5
+224
+98
+18
+223
+103
+18
+226
+110
+35
+239
+117
+44
+230
+123
+57
+231
+136
+72
+236
+147
+85
+238
+159
+107
+245
+169
+119
+234
+168
+124
+240
+181
+138
+239
+182
+144
+236
+186
+153
+250
+197
+158
+250
+197
+158
+250
+197
+158
+251
+192
+154
+236
+186
+153
+239
+182
+144
+245
+179
+138
+234
+168
+124
+238
+159
+107
+241
+153
+96
+231
+136
+72
+230
+128
+60
+225
+124
+48
+226
+110
+35
+223
+103
+18
+224
+98
+18
+230
+97
+5
+230
+97
+5
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+230
+97
+5
+224
+98
+18
+223
+103
+18
+226
+110
+35
+225
+124
+48
+230
+128
+60
+231
+136
+72
+241
+153
+96
+238
+159
+107
+234
+168
+124
+240
+181
+138
+239
+182
+144
+236
+186
+153
+251
+192
+154
+250
+197
+158
+250
+197
+158
+250
+197
+158
+236
+186
+153
+239
+182
+144
+240
+181
+138
+234
+168
+124
+245
+169
+119
+238
+159
+107
+236
+147
+85
+231
+136
+72
+230
+123
+57
+239
+117
+44
+226
+110
+35
+223
+103
+18
+224
+98
+18
+230
+97
+5
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+225
+92
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+220
+93
+11
+220
+93
+11
+224
+98
+18
+223
+103
+18
+226
+110
+35
+226
+110
+35
+225
+124
+48
+230
+128
+60
+231
+136
+72
+236
+147
+85
+241
+153
+96
+238
+159
+107
+238
+159
+107
+234
+168
+124
+234
+168
+124
+234
+168
+124
+234
+168
+124
+234
+168
+124
+238
+159
+107
+238
+159
+107
+241
+153
+96
+236
+147
+85
+231
+136
+72
+230
+128
+60
+230
+123
+57
+226
+110
+35
+226
+110
+35
+223
+103
+18
+224
+98
+18
+220
+93
+11
+220
+93
+11
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+220
+93
+11
+220
+93
+11
+224
+98
+18
+223
+103
+18
+226
+110
+35
+225
+124
+48
+230
+123
+57
+230
+128
+60
+231
+136
+72
+236
+147
+85
+241
+153
+96
+238
+159
+107
+238
+159
+107
+234
+168
+124
+234
+168
+124
+234
+168
+124
+234
+168
+124
+234
+168
+124
+238
+159
+107
+238
+159
+107
+241
+153
+96
+236
+147
+85
+231
+136
+72
+230
+128
+60
+225
+124
+48
+226
+110
+35
+226
+110
+35
+223
+103
+18
+224
+98
+18
+220
+93
+11
+220
+93
+11
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+220
+93
+11
+220
+93
+11
+220
+93
+11
+224
+98
+18
+223
+103
+18
+226
+110
+35
+226
+110
+35
+225
+124
+48
+230
+128
+60
+230
+128
+60
+231
+136
+72
+231
+136
+72
+236
+147
+85
+236
+147
+85
+236
+147
+85
+236
+147
+85
+236
+147
+85
+231
+136
+72
+231
+136
+72
+231
+136
+72
+230
+128
+60
+227
+126
+50
+225
+124
+48
+226
+110
+35
+223
+103
+18
+223
+103
+18
+224
+98
+18
+220
+93
+11
+220
+93
+11
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+218
+87
+5
+220
+93
+11
+220
+93
+11
+224
+98
+18
+223
+103
+18
+226
+110
+35
+226
+110
+35
+225
+124
+48
+230
+123
+57
+230
+128
+60
+231
+136
+72
+231
+136
+72
+231
+136
+72
+236
+147
+85
+236
+147
+85
+236
+147
+85
+236
+147
+85
+236
+147
+85
+231
+136
+72
+231
+136
+72
+230
+128
+60
+230
+123
+57
+225
+124
+48
+226
+110
+35
+226
+110
+35
+223
+103
+18
+224
+98
+18
+220
+93
+11
+220
+93
+11
+220
+93
+11
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+221
+89
+0
+217
+86
+3
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+221
+89
+0
+217
+86
+3
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+221
+89
+0
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+218
+87
+5
+218
+87
+5
+220
+93
+11
+220
+93
+11
+224
+98
+18
+223
+103
+18
+223
+103
+18
+226
+110
+35
+226
+110
+35
+225
+124
+48
+225
+124
+48
+225
+124
+48
+224
+123
+55
+224
+123
+55
+224
+123
+55
+230
+123
+57
+224
+123
+55
+224
+123
+55
+225
+124
+48
+225
+124
+48
+226
+110
+35
+226
+110
+35
+223
+103
+18
+223
+103
+18
+224
+98
+18
+220
+93
+11
+220
+93
+11
+218
+87
+5
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+221
+89
+0
+221
+89
+0
+217
+86
+3
+221
+89
+0
+221
+89
+0
+217
+86
+3
+221
+89
+0
+221
+89
+0
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+221
+89
+0
+221
+89
+0
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+217
+86
+3
+218
+87
+5
+218
+87
+5
+220
+93
+11
+220
+93
+11
+220
+93
+11
+224
+98
+18
+223
+103
+18
+226
+110
+35
+226
+110
+35
+226
+110
+35
+225
+124
+48
+225
+124
+48
+224
+123
+55
+230
+123
+57
+230
+123
+57
+230
+123
+57
+230
+123
+57
+230
+123
+57
+225
+124
+48
+225
+124
+48
+226
+110
+35
+226
+110
+35
+226
+110
+35
+223
+103
+18
+224
+98
+18
+224
+98
+18
+220
+93
+11
+220
+93
+11
+218
+87
+5
+218
+87
+5
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+221
+89
+0
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+218
+87
+5
+218
+87
+5
+218
+87
+5
+220
+93
+11
+220
+93
+11
+224
+98
+18
+224
+98
+18
+224
+98
+18
+223
+103
+18
+226
+110
+35
+226
+110
+35
+226
+110
+35
+226
+110
+35
+226
+110
+35
+226
+110
+35
+226
+110
+35
+226
+110
+35
+226
+110
+35
+223
+103
+18
+223
+103
+18
+224
+98
+18
+224
+98
+18
+220
+93
+11
+220
+93
+11
+218
+87
+5
+218
+87
+5
+218
+87
+5
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+218
+87
+5
+218
+87
+5
+218
+87
+5
+218
+87
+5
+220
+93
+11
+220
+93
+11
+224
+98
+18
+224
+98
+18
+223
+103
+18
+223
+103
+18
+226
+110
+35
+226
+110
+35
+226
+110
+35
+226
+110
+35
+226
+110
+35
+226
+110
+35
+226
+110
+35
+226
+110
+35
+226
+110
+35
+223
+103
+18
+224
+98
+18
+224
+98
+18
+220
+93
+11
+220
+93
+11
+220
+93
+11
+218
+87
+5
+218
+87
+5
+218
+87
+5
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+218
+87
+5
+218
+87
+5
+218
+87
+5
+218
+87
+5
+218
+87
+5
+220
+93
+11
+220
+93
+11
+220
+93
+11
+220
+93
+11
+224
+98
+18
+224
+98
+18
+224
+98
+18
+224
+98
+18
+224
+98
+18
+224
+98
+18
+220
+93
+11
+224
+98
+18
+220
+93
+11
+220
+93
+11
+220
+93
+11
+218
+87
+5
+218
+87
+5
+218
+87
+5
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+218
+87
+5
+217
+86
+3
+218
+87
+5
+218
+87
+5
+218
+87
+5
+220
+93
+11
+220
+93
+11
+220
+93
+11
+220
+93
+11
+220
+93
+11
+224
+98
+18
+224
+98
+18
+224
+98
+18
+224
+98
+18
+224
+98
+18
+220
+93
+11
+220
+93
+11
+220
+93
+11
+220
+93
+11
+220
+93
+11
+218
+87
+5
+218
+87
+5
+218
+87
+5
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+218
+87
+5
+218
+87
+5
+218
+87
+5
+218
+87
+5
+218
+87
+5
+218
+87
+5
+218
+87
+5
+218
+87
+5
+218
+87
+5
+218
+87
+5
+218
+87
+5
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+218
+87
+5
+218
+87
+5
+218
+87
+5
+218
+87
+5
+218
+87
+5
+218
+87
+5
+218
+87
+5
+218
+87
+5
+218
+87
+5
+218
+87
+5
+218
+87
+5
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+217
+86
+3
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+217
+86
+3
+217
+86
+3
+217
+86
+3
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+217
+86
+3
+217
+86
+3
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+217
+86
+3
+217
+86
+3
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+217
+86
+3
+217
+86
+3
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+217
+86
+3
+217
+86
+3
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+217
+86
+3
+217
+86
+3
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+217
+86
+3
+217
+86
+3
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+217
+86
+3
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+217
+86
+3
+217
+86
+3
+214
+84
+0
+214
+84
+0
+214
+84
+0
+217
+86
+3
+217
+86
+3
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+217
+86
+3
+217
+86
+3
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
+214
+84
+0
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0001-mt9t111-first-stab-at-merging-sensor-driver-based-on.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0001-mt9t111-first-stab-at-merging-sensor-driver-based-on.patch
new file mode 100644
index 0000000..ccd979c
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0001-mt9t111-first-stab-at-merging-sensor-driver-based-on.patch
@@ -0,0 +1,2394 @@
+From a03a0f8d0c856a152f477efea64e7df1c927c9b1 Mon Sep 17 00:00:00 2001
+From: OpenEmbedded User <oe@OE-builder.(none)>
+Date: Tue, 9 Feb 2010 17:16:13 +0100
+Subject: [PATCH 01/75] mt9t111: first stab at merging sensor driver based on a patch by Leopard Imaging
+
+---
+ drivers/media/video/Kconfig       |    8 +
+ drivers/media/video/Makefile      |    1 +
+ drivers/media/video/mt9t111.c     |  883 ++++++++++++++++++++++++
+ drivers/media/video/mt9t111_reg.h | 1364 +++++++++++++++++++++++++++++++++++++
+ include/media/mt9t111.h           |   79 +++
+ 5 files changed, 2335 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/media/video/mt9t111.c
+ create mode 100644 drivers/media/video/mt9t111_reg.h
+ create mode 100644 include/media/mt9t111.h
+
+diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
+index 41e39a7..f67ed46 100644
+--- a/drivers/media/video/Kconfig
++++ b/drivers/media/video/Kconfig
+@@ -344,6 +344,14 @@ config VIDEO_MT9P012
+ 	  MT9P012 camera.  It is currently working with the TI OMAP3
+ 	  camera controller.
+ 
++config VIDEO_MT9T111
++	tristate "Micron MT9T111 raw sensor driver (3MP)"
++	depends on I2C && VIDEO_V4L2
++	---help---
++	  This is a Video4Linux2 sensor-level driver for the Micron
++	  MT9T111 camera.  It is currently working with the TI OMAP3
++	  camera controller.
++
+ config VIDEO_DW9710
+ 	tristate "Lens driver for DW9710"
+ 	depends on I2C && VIDEO_V4L2
+diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
+index 88e8ec1..31688bf 100644
+--- a/drivers/media/video/Makefile
++++ b/drivers/media/video/Makefile
+@@ -127,6 +127,7 @@ obj-$(CONFIG_VIDEO_CAFE_CCIC) += cafe_ccic.o
+ obj-y				+= isp/
+ obj-$(CONFIG_VIDEO_OMAP3)	+= omap34xxcam.o
+ obj-$(CONFIG_VIDEO_MT9P012)     += mt9p012.o
++obj-$(CONFIG_VIDEO_MT9T111)     += mt9t111.o
+ obj-$(CONFIG_VIDEO_DW9710)	+= dw9710.o
+ obj-$(CONFIG_VIDEO_TPS61059)    += tps61059.o
+ obj-$(CONFIG_VIDEO_OV3640)	+= ov3640.o
+diff --git a/drivers/media/video/mt9t111.c b/drivers/media/video/mt9t111.c
+new file mode 100644
+index 0000000..ecc5115
+--- /dev/null
++++ b/drivers/media/video/mt9t111.c
+@@ -0,0 +1,883 @@
++/*
++ * drivers/media/video/mt9t111.c
++ *
++ * mt9t111 sensor driver
++ *
++ * Copyright (C) 2009 Leopard Imaging
++ *
++ * This file is licensed under the terms of the GNU General Public License
++ * version 2. This program is licensed "as is" without any warranty of any
++ * kind, whether express or implied.
++ */
++
++#include <linux/i2c.h>
++#include <linux/delay.h>
++#include <media/v4l2-int-device.h>
++
++#include <media/mt9t111.h>
++#include "mt9t111_reg.h"
++
++#define USE_RAW // YCbCr mode does not work yet
++//#define COLOR_BAR // Create a Color bar test pattern, Blue, Green, Red, Grey
++
++#define SENSOR_DETECTED		1
++#define SENSOR_NOT_DETECTED	0
++
++static void mt9t111_loaddefault(struct i2c_client *client);
++
++/* 
++* as a place holder for further development
++*/
++static void debug_dummy(char *in_msg)
++{
++	
++}
++
++/* list of image formats supported by mt9t111 sensor */
++const static struct v4l2_fmtdesc mt9t111_formats[] = {
++#ifdef USE_RAW
++	{
++		.description    = "RAW ",
++		.pixelformat    = V4L2_PIX_FMT_SGRBG10,
++	},
++#else
++	{
++		.description    = "YUV 422 ",
++		.pixelformat    = V4L2_PIX_FMT_YUYV,
++	},
++#endif
++};
++
++#define NUM_CAPTURE_FORMATS ARRAY_SIZE(mt9t111_formats)
++
++/*
++ * Array of image sizes supported by MT9T111.  These must be ordered from
++ * smallest image size to largest.
++ */
++const static struct capture_size mt9t111_sizes[] = {
++	{  640, 480 },	
++//	{ 2048, 1536}		
++};
++
++#define NUM_CAPTURE_SIZE ARRAY_SIZE(mt9t111_sizes)
++
++
++const struct v4l2_fract mt9t111_frameintervals[] = {
++	{  .numerator = 1, .denominator = 10 }
++};
++
++#define NUM_CAPTURE_FRAMEINTERVALS ARRAY_SIZE(mt9t111_frameintervals)
++
++/**
++ * struct mt9t111_sensor - main structure for storage of sensor information
++ * @pdata: access functions and data for platform level information
++ * @v4l2_int_device: V4L2 device structure structure
++ * @i2c_client: iic client device structure
++ * @pix: V4L2 pixel format information structure
++ * @timeperframe: time per frame expressed as V4L fraction
++ * @scaler:
++ * @ver: mt9t111 chip version
++ * @fps: frames per second value
++ */
++struct mt9t111_sensor {
++	const struct mt9t111_platform_data *pdata;
++	struct v4l2_int_device *v4l2_int_device;
++	struct i2c_client *i2c_client;
++	struct v4l2_pix_format pix;
++	struct v4l2_fract timeperframe;
++	int scaler;
++	int ver;
++	int fps;
++	int state;
++};
++
++static struct mt9t111_sensor mt9t111 = {
++	.timeperframe = {
++		.numerator = 1,
++		.denominator = 10,
++	},
++	.state = SENSOR_NOT_DETECTED,
++};
++
++/**
++ * mt9t111_read_reg - Read a value from a register in an mt9t111 sensor device
++ * @client: i2c driver client structure
++ * @data_length: length of data to be read
++ * @reg: register address / offset
++ * @val: stores the value that gets read
++ *
++ * Read a value from a register in an mt9t111 sensor device.
++ * The value is returned in 'val'.
++ * Returns zero if successful, or non-zero otherwise.
++ */
++static int
++mt9t111_read_reg(struct i2c_client *client, u16 reg, u16 *val)
++{
++	struct i2c_msg msg[1];
++	u8 data[4];
++	int err;
++
++	msg->addr = client->addr;
++	msg->flags = 0;
++	msg->len = 2;
++	msg->buf = data;	
++	data[0] = (reg & 0xff00) >> 8;
++	data[1] = (reg & 0x00ff);
++	err = i2c_transfer(client->adapter, msg, 1);
++	if (err >= 0) {			
++		msg->flags = I2C_M_RD;			
++		msg->len = 2;	/* 2 byte read */			
++		err = i2c_transfer(client->adapter, msg, 1);			
++		if (err >= 0) {				
++			*val = ((data[0] & 0x00ff) << 8)    
++				| (data[1] & 0x00ff);	
++			return 0;
++		}
++	}
++	return err;
++}
++
++/**
++ * mt9t111_write_reg - Write a value to a register in an mt9t111 sensor device
++ * @client: i2c driver client structure
++ * @data_length: length of data to be read
++ * @reg: register address / offset
++ * @val: value to be written to specified register
++ *
++ * Write a value to a register in an mt9t111 sensor device.
++ * Returns zero if successful, or non-zero otherwise.
++ */
++static int
++mt9t111_write_reg(struct i2c_client *client, u16 reg, u16 val)
++{
++	struct i2c_msg msg[1];
++	u8 data[20];
++	int err;
++
++	msg->addr = client->addr;
++	msg->flags = 0;
++	msg->len = 4;
++	msg->buf = data;
++	data[0] = (u8)((reg & 0xff00) >> 8);
++	data[1] = (u8)(reg & 0x00ff);	
++	data[2] = (u8)((val & 0xff00) >> 8);
++	data[3] = (u8)(val & 0x00ff);
++	err = i2c_transfer(client->adapter, msg, 1);
++
++	return err;
++}
++
++/**
++ * mt9t111_write_regs - Write registers to an mt9t111 sensor device
++ * @client: i2c driver client structure
++ * @reg_in: pointer to registers to write
++ * @cnt: the number of registers 
++ *
++ * Write registers .
++ * Returns zero if successful, or non-zero otherwise.
++ */
++static int
++mt9t111_write_regs(struct i2c_client *client, mt9t111_regs *reg_in, int cnt)
++{
++	int err = 0;
++	int i;
++	mt9t111_regs *reg = reg_in;
++	
++	for (i=0;i<cnt;i++) {
++		if (reg->delay_time == 0) {
++			err |= mt9t111_write_reg(client, reg->addr, reg->data);
++		} else if (reg->addr != 0 || reg->data != 0) {
++			err |= mt9t111_write_reg(client, reg->addr, reg->data);
++			mdelay(reg->delay_time);
++		} else 
++			mdelay(reg->delay_time);
++			
++		if (err < 0) {
++			dev_warn(&client->dev, "write reg error, addr = 0x%x, data = 0x%x \n", \
++				reg->addr, reg->data);
++			return err;
++		}
++		reg++;
++	}
++	return err;
++}
++
++/**
++ * mt9t111_detect - Detect if an mt9t111 is present, and if so which revision
++ * @client: pointer to the i2c client driver structure
++ *
++ * Detect if an mt9t111 is present
++ * Returns a negative error number if no device is detected, or the
++ * non-negative value of the version ID register if a device is detected.
++ */
++static int
++mt9t111_detect(struct i2c_client *client)
++{
++	u16 val;
++
++	/* chip ID is at address 0 */
++	if (mt9t111_read_reg(client, MT9T111_CHIP_ID, &val) < 0)
++		return -ENODEV;
++	dev_info(&client->dev, "model id detected 0x%x\n", val);
++	
++	if (val != MT9T111_CHIP_ID_VALUE) {
++		dev_warn(&client->dev, "model id mismatch received 0x%x expecting 0x%x\n",
++			val, MT9T111_CHIP_ID_VALUE);
++
++		return -ENODEV;
++	}
++
++	return 0;
++
++}
++
++/**
++ * mt9t111_configure - Configure the mt9t111 for the specified image mode
++ * @s: pointer to standard V4L2 device structure
++ *
++ * Configure the mt9t111 for a specified image size, pixel format, and frame
++ * period.  xclk is the frequency (in Hz) of the xclk input to the mt9t111.
++ * fper is the frame period (in seconds) expressed as a fraction.
++ * Returns zero if successful, or non-zero otherwise.
++ * The actual frame period is returned in fper.
++ */
++static int mt9t111_configure(struct v4l2_int_device *s)
++{
++	debug_dummy("debug_dummy -- to set imager mode");
++
++	return 0;
++}
++
++/**
++ * ioctl_enum_framesizes - V4L2 sensor if handler for vidioc_int_enum_framesizes
++ * @s: pointer to standard V4L2 device structure
++ * @frms: pointer to standard V4L2 framesizes enumeration structure
++ *
++ * Returns possible framesizes depending on choosen pixel format
++ **/
++static int ioctl_enum_framesizes(struct v4l2_int_device *s,
++					struct v4l2_frmsizeenum *frms)
++{
++	int ifmt;
++
++	for (ifmt = 0; ifmt < NUM_CAPTURE_FORMATS; ifmt++) {
++		if (frms->pixel_format == mt9t111_formats[ifmt].pixelformat)
++			break;
++	}
++	/* Is requested pixelformat not found on sensor? */
++	if (ifmt == NUM_CAPTURE_FORMATS)
++		return -EINVAL;
++
++	/* Do we already reached all discrete framesizes? */
++	if (frms->index >= NUM_CAPTURE_SIZE)
++		return -EINVAL;
++
++	frms->type = V4L2_FRMSIZE_TYPE_DISCRETE;
++	frms->discrete.width = mt9t111_sizes[frms->index].width;
++	frms->discrete.height = mt9t111_sizes[frms->index].height;
++
++	return 0;
++
++}
++
++static int ioctl_enum_frameintervals(struct v4l2_int_device *s,
++					struct v4l2_frmivalenum *frmi)
++{
++	int ifmt;
++
++printk(KERN_INFO "entering ioctl_enum_frameintervals\n");
++printk(KERN_INFO "index = %d, pixel_format = 0x%x, width = %d, height = %d\n",
++			frmi->index, frmi->pixel_format, frmi->width, frmi->height);
++printk(KERN_INFO "mt9t111 format = 0x%x\n",	mt9t111_formats[0].pixelformat);
++
++	if (frmi->index >= NUM_CAPTURE_FRAMEINTERVALS)
++		return -EINVAL;
++	
++	for (ifmt = 0; ifmt < NUM_CAPTURE_FORMATS; ifmt++) {
++		if (frmi->pixel_format == mt9t111_formats[ifmt].pixelformat)
++			break;
++	}
++	/* Is requested pixelformat not found on sensor? */
++	if (ifmt == NUM_CAPTURE_FORMATS)
++		return -EINVAL;
++
++	frmi->type = V4L2_FRMSIZE_TYPE_DISCRETE;
++	frmi->discrete.numerator =
++				mt9t111_frameintervals[frmi->index].numerator;
++	frmi->discrete.denominator =
++				mt9t111_frameintervals[frmi->index].denominator;
++	return 0;
++}
++
++/**
++ * ioctl_init - V4L2 sensor interface handler for VIDIOC_INT_INIT
++ * @s: pointer to standard V4L2 device structure
++ *
++ * Initialize the sensor device (call mt9t111_configure())
++ */
++static int ioctl_init(struct v4l2_int_device *s)
++{
++	return 0;
++}
++
++/**
++ * ioctl_dev_exit - V4L2 sensor interface handler for vidioc_int_dev_exit_num
++ * @s: pointer to standard V4L2 device structure
++ *
++ * Delinitialise the dev. at slave detach.  The complement of ioctl_dev_init.
++ */
++static int ioctl_dev_exit(struct v4l2_int_device *s)
++{
++	return 0;
++}
++
++/**
++ * ioctl_dev_init - V4L2 sensor interface handler for vidioc_int_dev_init_num
++ * @s: pointer to standard V4L2 device structure
++ *
++ * Initialise the device when slave attaches to the master.  Returns 0 if
++ * mt9t111 device could be found, otherwise returns appropriate error.
++ */
++static int ioctl_dev_init(struct v4l2_int_device *s)
++{
++	return 0;
++}
++
++/**
++ * ioctl_s_power - V4L2 sensor interface handler for vidioc_int_s_power_num
++ * @s: pointer to standard V4L2 device structure
++ * @on: power state to which device is to be set
++ *
++ * Sets devices power state to requrested state, if possible.
++ */
++static int ioctl_s_power(struct v4l2_int_device *s, enum v4l2_power on)
++{
++	struct mt9t111_sensor *sensor = s->priv;
++	struct i2c_client *c = sensor->i2c_client;
++	int rval;
++
++	if ((on == V4L2_POWER_STANDBY) && (sensor->state == SENSOR_DETECTED))
++		debug_dummy("debug_dummy -- put to standby\n");
++
++	if (on != V4L2_POWER_ON)
++		debug_dummy("debug_dummy -- stop master clock\n");
++	else
++		debug_dummy("debug_dummy -- enable clock\n");;
++
++	rval = sensor->pdata->power_set(on);
++	if (rval < 0) {
++		dev_err(&c->dev, "Unable to set the power state: " "mt9t111"
++								" sensor\n");
++		//sensor->pdata->set_xclk(0);
++		return rval;
++	}
++
++	if ((on == V4L2_POWER_ON) && (sensor->state == SENSOR_DETECTED))
++		mt9t111_configure(s);
++
++	if ((on == V4L2_POWER_ON) && (sensor->state == SENSOR_NOT_DETECTED)) {
++		rval = mt9t111_detect(c);
++		if (rval < 0) {
++			dev_err(&c->dev, "Unable to detect " "mt9t111"
++								" sensor\n");
++			sensor->state = SENSOR_NOT_DETECTED;
++			return rval;
++		}
++		mt9t111_loaddefault(c);
++		sensor->state = SENSOR_DETECTED;
++		sensor->ver = rval;
++		pr_info("mt9t111" " chip version 0x%02x detected\n",
++								sensor->ver);
++	}
++	return 0;
++}
++
++/**
++ * ioctl_g_priv - V4L2 sensor interface handler for vidioc_int_g_priv_num
++ * @s: pointer to standard V4L2 device structure
++ * @p: void pointer to hold sensor's private data address
++ *
++ * Returns device's (sensor's) private data area address in p parameter
++ */
++static int ioctl_g_priv(struct v4l2_int_device *s, void *p)
++{
++	struct mt9t111_sensor *sensor = s->priv;
++
++	return sensor->pdata->priv_data_set(p);
++}
++
++/**
++ * ioctl_s_parm - V4L2 sensor interface handler for VIDIOC_S_PARM ioctl
++ * @s: pointer to standard V4L2 device structure
++ * @a: pointer to standard V4L2 VIDIOC_S_PARM ioctl structure
++ *
++ * Configures the sensor to use the input parameters, if possible.  If
++ * not possible, reverts to the old parameters and returns the
++ * appropriate error code.
++ */
++static int ioctl_s_parm(struct v4l2_int_device *s,
++			     struct v4l2_streamparm *a)
++{
++	//TODO: set paramters
++	debug_dummy("debug_dummy -- VIDIOC_S_PARM ");
++	return 0;
++}
++
++/**
++ * ioctl_g_parm - V4L2 sensor interface handler for VIDIOC_G_PARM ioctl
++ * @s: pointer to standard V4L2 device structure
++ * @a: pointer to standard V4L2 VIDIOC_G_PARM ioctl structure
++ *
++ * Returns the sensor's video CAPTURE parameters.
++ */
++static int ioctl_g_parm(struct v4l2_int_device *s,
++			     struct v4l2_streamparm *a)
++{
++	struct mt9t111_sensor *sensor = s->priv;
++	struct v4l2_captureparm *cparm = &a->parm.capture;
++
++	if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
++		return -EINVAL;
++
++	memset(a, 0, sizeof(*a));
++	a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
++
++	cparm->capability = V4L2_CAP_TIMEPERFRAME;
++	cparm->timeperframe = sensor->timeperframe;
++
++	return 0;
++}
++
++/**
++ * ioctl_g_fmt_cap - V4L2 sensor interface handler for ioctl_g_fmt_cap
++ * @s: pointer to standard V4L2 device structure
++ * @f: pointer to standard V4L2 v4l2_format structure
++ *
++ * Returns the sensor's current pixel format in the v4l2_format
++ * parameter.
++ */
++static int ioctl_g_fmt_cap(struct v4l2_int_device *s,
++				struct v4l2_format *f)
++{
++	struct mt9t111_sensor *sensor = s->priv;
++	f->fmt.pix = sensor->pix;
++
++	return 0;
++}
++
++/**
++ * ioctl_try_fmt_cap - Implement the CAPTURE buffer VIDIOC_TRY_FMT ioctl
++ * @s: pointer to standard V4L2 device structure
++ * @f: pointer to standard V4L2 VIDIOC_TRY_FMT ioctl structure
++ *
++ * Implement the VIDIOC_TRY_FMT ioctl for the CAPTURE buffer type.  This
++ * ioctl is used to negotiate the image capture size and pixel format
++ * without actually making it take effect.
++ */
++static int ioctl_try_fmt_cap(struct v4l2_int_device *s,
++			     struct v4l2_format *f)
++{
++	struct v4l2_pix_format *pix = &f->fmt.pix;
++	struct mt9t111_sensor *sensor = s->priv;
++	struct v4l2_pix_format *pix2 = &sensor->pix;
++
++	pix->width = 640;
++	pix->height = 480;
++#ifdef USE_RAW	
++	pix->pixelformat = V4L2_PIX_FMT_SGRBG10;
++	pix->bytesperline = pix->width; 
++	pix->colorspace =  V4L2_COLORSPACE_SRGB;
++#else
++	pix->pixelformat = V4L2_PIX_FMT_YUYV;
++	pix->bytesperline = pix->width * 2;  
++	pix->colorspace = V4L2_COLORSPACE_JPEG;
++#endif
++	pix->field = V4L2_FIELD_NONE;
++
++	pix->sizeimage = pix->bytesperline * pix->height;
++	pix->priv = 0;
++	*pix2 = *pix;
++	return 0;
++}
++
++/**
++ * ioctl_s_fmt_cap - V4L2 sensor interface handler for VIDIOC_S_FMT ioctl
++ * @s: pointer to standard V4L2 device structure
++ * @f: pointer to standard V4L2 VIDIOC_S_FMT ioctl structure
++ *
++ * If the requested format is supported, configures the HW to use that
++ * format, returns error code if format not supported or HW can't be
++ * correctly configured.
++ */
++static int ioctl_s_fmt_cap(struct v4l2_int_device *s,
++				struct v4l2_format *f)
++{
++	struct mt9t111_sensor *sensor = s->priv;
++	struct v4l2_pix_format *pix = &f->fmt.pix;
++	int rval;
++
++	rval = ioctl_try_fmt_cap(s, f);
++	if (!rval)
++		sensor->pix = *pix;
++
++	return rval;
++}
++
++/**
++ * ioctl_enum_fmt_cap - Implement the CAPTURE buffer VIDIOC_ENUM_FMT ioctl
++ * @s: pointer to standard V4L2 device structure
++ * @fmt: standard V4L2 VIDIOC_ENUM_FMT ioctl structure
++ *
++ * Implement the VIDIOC_ENUM_FMT ioctl for the CAPTURE buffer type.
++ */
++static int ioctl_enum_fmt_cap(struct v4l2_int_device *s,
++				   struct v4l2_fmtdesc *fmt)
++{
++	int index = fmt->index;
++	enum v4l2_buf_type type = fmt->type;
++
++	memset(fmt, 0, sizeof(*fmt));
++	fmt->index = index;
++	fmt->type = type;
++
++	switch (fmt->type) {
++	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
++		if (index >= NUM_CAPTURE_FORMATS)
++			return -EINVAL;
++	break;
++	default:
++		return -EINVAL;
++	}
++
++	fmt->flags = mt9t111_formats[index].flags;
++	strlcpy(fmt->description, mt9t111_formats[index].description,
++					sizeof(fmt->description));
++	fmt->pixelformat = mt9t111_formats[index].pixelformat;
++
++	return 0;
++}
++
++/**
++ * ioctl_s_ctrl - V4L2 sensor interface handler for VIDIOC_S_CTRL ioctl
++ * @s: pointer to standard V4L2 device structure
++ * @vc: standard V4L2 VIDIOC_S_CTRL ioctl structure
++ *
++ * If the requested control is supported, sets the control's current
++ * value in HW (and updates the video_control[] array).  Otherwise,
++ * returns -EINVAL if the control is not supported.
++ */
++static int ioctl_s_ctrl(struct v4l2_int_device *s,
++			     struct v4l2_control *vc)
++{
++	debug_dummy("debug_dummy -- s ctrl\n");
++	return 0;
++}
++
++/**
++ * ioctl_g_ctrl - V4L2 sensor interface handler for VIDIOC_G_CTRL ioctl
++ * @s: pointer to standard V4L2 device structure
++ * @vc: standard V4L2 VIDIOC_G_CTRL ioctl structure
++ *
++ * If the requested control is supported, returns the control's current
++ * value from the video_control[] array.  Otherwise, returns -EINVAL
++ * if the control is not supported.
++ */
++static int ioctl_g_ctrl(struct v4l2_int_device *s,
++			     struct v4l2_control *vc)
++{
++	debug_dummy("debug_dummy -- g ctrl\n");	
++	return 0;
++}
++
++/**
++ * ioctl_queryctrl - V4L2 sensor interface handler for VIDIOC_QUERYCTRL ioctl
++ * @s: pointer to standard V4L2 device structure
++ * @qc: standard V4L2 VIDIOC_QUERYCTRL ioctl structure
++ *
++ * If the requested control is supported, returns the control information
++ * from the video_control[] array.  Otherwise, returns -EINVAL if the
++ * control is not supported.
++ */
++static int ioctl_queryctrl(struct v4l2_int_device *s,
++				struct v4l2_queryctrl *qc)
++{
++	debug_dummy("debug_dummy -- query ctrl\n");	
++	return-EINVAL;
++}
++
++/**
++ * ioctl_s_routing - V4L2 decoder interface handler for VIDIOC_S_INPUT ioctl
++ * @s: pointer to standard V4L2 device structure
++ * @index: number of the input
++ *
++ * If index is valid, selects the requested input. Otherwise, returns -EINVAL if
++ * the input is not supported or there is no active signal present in the
++ * selected input.
++ */
++static int ioctl_s_routing(struct v4l2_int_device *s,
++				struct v4l2_routing *route)
++{
++	return 0;
++}
++
++/**
++ * ioctl_g_ifparm - V4L2 decoder interface handler for vidioc_int_g_ifparm_num
++ * @s: pointer to standard V4L2 device structure
++ * @p: pointer to standard V4L2 vidioc_int_g_ifparm_num ioctl structure
++ *
++ * Gets slave interface parameters.
++ * Calculates the required xclk value to support the requested
++ * clock parameters in p. This value is returned in the p
++ * parameter.
++ */
++static int ioctl_g_ifparm(struct v4l2_int_device *s, struct v4l2_ifparm *p)
++{
++	struct mt9t111_sensor *sensor = s->priv;
++	int rval;
++
++	if (p == NULL)
++		return -EINVAL;
++
++	if (NULL == sensor->pdata->ifparm)
++		return -EINVAL;
++
++	rval = sensor->pdata->ifparm(p);
++	if (rval) {
++		v4l_err(sensor->i2c_client, "g_ifparm.Err[%d]\n", rval);
++		return rval;
++	}
++
++	p->u.ycbcr.clock_curr = 40*1000000; // temporal value
++
++	return 0;
++}
++
++
++static struct v4l2_int_ioctl_desc mt9t111_ioctl_desc[] = {
++	{ .num = vidioc_int_enum_framesizes_num,
++	  .func = (v4l2_int_ioctl_func *)ioctl_enum_framesizes },
++	{ .num = vidioc_int_enum_frameintervals_num,
++	  .func = (v4l2_int_ioctl_func *)ioctl_enum_frameintervals },
++	{ .num = vidioc_int_dev_init_num,
++	  .func = (v4l2_int_ioctl_func *)ioctl_dev_init },
++	{ .num = vidioc_int_dev_exit_num,
++	  .func = (v4l2_int_ioctl_func *)ioctl_dev_exit },
++	{ .num = vidioc_int_s_power_num,
++	  .func = (v4l2_int_ioctl_func *)ioctl_s_power },
++	{ .num = vidioc_int_g_priv_num,
++	  .func = (v4l2_int_ioctl_func *)ioctl_g_priv },
++  	{vidioc_int_g_ifparm_num, 
++  	  .func = (v4l2_int_ioctl_func*) ioctl_g_ifparm},
++	{ .num = vidioc_int_init_num,
++	  .func = (v4l2_int_ioctl_func *)ioctl_init },
++	{ .num = vidioc_int_enum_fmt_cap_num,
++	  .func = (v4l2_int_ioctl_func *)ioctl_enum_fmt_cap },
++	{ .num = vidioc_int_try_fmt_cap_num,
++	  .func = (v4l2_int_ioctl_func *)ioctl_try_fmt_cap },
++	{ .num = vidioc_int_g_fmt_cap_num,
++	  .func = (v4l2_int_ioctl_func *)ioctl_g_fmt_cap },
++	{ .num = vidioc_int_s_fmt_cap_num,
++	  .func = (v4l2_int_ioctl_func *)ioctl_s_fmt_cap },
++	{ .num = vidioc_int_g_parm_num,
++	  .func = (v4l2_int_ioctl_func *)ioctl_g_parm },
++	{ .num = vidioc_int_s_parm_num,
++	  .func = (v4l2_int_ioctl_func *)ioctl_s_parm },
++	{ .num = vidioc_int_queryctrl_num,
++	  .func = (v4l2_int_ioctl_func *)ioctl_queryctrl },
++	{ .num = vidioc_int_g_ctrl_num,
++	  .func = (v4l2_int_ioctl_func *)ioctl_g_ctrl },
++	{ .num = vidioc_int_s_ctrl_num,
++	  .func = (v4l2_int_ioctl_func *)ioctl_s_ctrl },
++	{.num = vidioc_int_s_video_routing_num,
++		.func = (v4l2_int_ioctl_func *) ioctl_s_routing},	  
++};
++
++static void mt9t111_refresh(struct i2c_client *client){	
++	int i;	
++	unsigned short value;		
++	// MCU_ADDRESS [SEQ_CMD] -- refresh	
++	mt9t111_write_reg(client, 0x098E,	    0x8400);	
++	mt9t111_write_reg(client, 0x0990,	    0x0006);	
++	for (i=0;i<100;i++){		
++		mt9t111_write_reg(client, 0x098E, 0x8400);			
++		mt9t111_read_reg(client,0x0990,&value);				
++		if ( value == 0)			
++			break;		
++		mdelay(5);	
++	}
++}
++
++#ifdef COLOR_BAR
++static void mt9t111_color_bar(struct i2c_client *client)
++{
++	mt9t111_write_reg(client, 0x3210, 0x01B0); // disable lens correction
++
++	mt9t111_write_reg(client, 0x098E, 0x6003);
++	mt9t111_write_reg(client, 0x0990, 0x0100);
++	mt9t111_write_reg(client, 0x098E, 0x6025);
++	mt9t111_write_reg(client, 0x0990, 0x0003);
++}
++#endif
++
++static void mt9t111_bayer_format(struct i2c_client *client)
++{
++	mt9t111_write_regs(client, bayer_pattern_regs, sizeof(bayer_pattern_regs)/sizeof(mt9t111_regs));
++}
++
++static void mt9t111_enable_pll(struct i2c_client *client)
++{
++	int i;
++	unsigned short value; 
++
++	mt9t111_write_regs(client, pll_regs1, sizeof(pll_regs1)/sizeof(mt9t111_regs));
++	for (i=0;i<100;i++){
++		mt9t111_read_reg(client,0x0014,&value);
++		if (( value & 0x8000) != 0)
++			break;
++		mdelay(2);
++	}
++	mt9t111_write_regs(client, pll_regs2, sizeof(pll_regs2)/sizeof(mt9t111_regs));
++}
++
++
++static void mt9t111_loaddefault(struct i2c_client *client)
++{
++	mt9t111_write_reg(client, 0x001A, 0x0219);
++	mt9t111_write_reg(client, 0x001A, 0x0218);
++
++	mt9t111_enable_pll(client);
++	mt9t111_write_regs(client, def_regs1, sizeof(def_regs1)/sizeof(mt9t111_regs));
++	mt9t111_write_regs(client, patch_rev6, sizeof(patch_rev6)/sizeof(mt9t111_regs));
++	mt9t111_write_regs(client, def_regs2, sizeof(def_regs2)/sizeof(mt9t111_regs));
++
++#ifdef USE_RAW
++	mt9t111_bayer_format(client);
++#endif
++
++#ifdef COLOR_BAR
++	mt9t111_color_bar(client);
++#endif
++
++	mt9t111_refresh(client);
++}
++
++static struct v4l2_int_slave mt9t111_slave = {
++	.ioctls = mt9t111_ioctl_desc,
++	.num_ioctls = ARRAY_SIZE(mt9t111_ioctl_desc),
++};
++
++static struct v4l2_int_device mt9t111_int_device = {
++	.module = THIS_MODULE,
++	.name = "mt9t111",
++	.priv = &mt9t111,
++	.type = v4l2_int_type_slave,
++	.u = {
++		.slave = &mt9t111_slave,
++	},
++};
++
++/**
++ * mt9t111_probe - sensor driver i2c probe handler
++ * @client: i2c driver client device structure
++ *
++ * Register sensor as an i2c client device and V4L2
++ * device.
++ */
++static int
++mt9t111_probe(struct i2c_client *client, const struct i2c_device_id *id)
++{
++	struct mt9t111_sensor *sensor = &mt9t111;
++	int err;
++
++	if (i2c_get_clientdata(client))
++		return -EBUSY;
++
++	sensor->pdata = client->dev.platform_data;
++
++	if (!sensor->pdata) {
++		dev_err(&client->dev, "no platform data?\n");
++		return -ENODEV;
++	}
++
++	sensor->v4l2_int_device = &mt9t111_int_device;
++	sensor->i2c_client = client;
++
++	i2c_set_clientdata(client, sensor);
++
++	sensor->pix.width = 640;
++	sensor->pix.height = 480;
++#ifdef USE_RAW	
++	sensor->pix.pixelformat = V4L2_PIX_FMT_SGRBG10;
++#else
++	sensor->pix.pixelformat = V4L2_PIX_FMT_YUYV;
++#endif
++	err = v4l2_int_device_register(sensor->v4l2_int_device);
++	if (err)
++		i2c_set_clientdata(client, NULL);
++	return err;
++}
++
++/**
++ * mt9t111_remove - sensor driver i2c remove handler
++ * @client: i2c driver client device structure
++ *
++ * Unregister sensor as an i2c client device and V4L2
++ * device.  Complement of mt9t111_probe().
++ */
++static int __exit
++mt9t111_remove(struct i2c_client *client)
++{
++	struct mt9t111_sensor *sensor = i2c_get_clientdata(client);
++
++	if (!client->adapter)
++		return -ENODEV;	/* our client isn't attached */
++
++	v4l2_int_device_unregister(sensor->v4l2_int_device);
++	i2c_set_clientdata(client, NULL);
++
++	return 0;
++}
++
++static const struct i2c_device_id mt9t111_id[] = {
++	{ "mt9t111", 0 },
++	{ },
++};
++MODULE_DEVICE_TABLE(i2c, mt9t111_id);
++
++static struct i2c_driver mt9t111sensor_i2c_driver = {
++	.driver = {
++		.name = "mt9t111",
++		.owner = THIS_MODULE,
++	},
++	.probe = mt9t111_probe,
++	.remove = __exit_p(mt9t111_remove),
++	.id_table = mt9t111_id,
++};
++
++/**
++ * mt9t111sensor_init - sensor driver module_init handler
++ *
++ * Registers driver as an i2c client driver.  Returns 0 on success,
++ * error code otherwise.
++ */
++static int __init mt9t111sensor_init(void)
++{
++printk(KERN_INFO "entering mt9t111sensor_init\n");
++	return i2c_add_driver(&mt9t111sensor_i2c_driver);
++}
++module_init(mt9t111sensor_init);
++
++/**
++ * mt9t111sensor_cleanup - sensor driver module_exit handler
++ *
++ * Unregisters/deletes driver as an i2c client driver.
++ * Complement of mt9t111sensor_init.
++ */
++static void __exit mt9t111sensor_cleanup(void)
++{
++	i2c_del_driver(&mt9t111sensor_i2c_driver);
++}
++module_exit(mt9t111sensor_cleanup);
++
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION("mt9t111 camera sensor driver");
+diff --git a/drivers/media/video/mt9t111_reg.h b/drivers/media/video/mt9t111_reg.h
+new file mode 100644
+index 0000000..e012eeb
+--- /dev/null
++++ b/drivers/media/video/mt9t111_reg.h
+@@ -0,0 +1,1364 @@
++/*
++ * drivers/media/video/mt9t111_reg.h
++ *
++ * mt9t111 sensor driver header file
++ *
++ * Copyright (C) 2009 Leopard Imaging
++ *
++ * This file is licensed under the terms of the GNU General Public License
++ * version 2. This program is licensed "as is" without any warranty of any
++ * kind, whether express or implied.
++ */
++
++#ifndef MT9T111_REG_H
++#define MT9T111_REG_H
++
++/* register addr */
++#define MT9T111_CHIP_ID 		(0x0000)
++
++/* register value */
++#define MT9T111_CHIP_ID_VALUE	(0x2680)
++
++typedef struct {
++	u16 delay_time;
++	u16 addr;
++	u16 data;
++} mt9t111_regs;
++
++mt9t111_regs patch_rev6[] ={
++	{0, 0x0982, 0x0},
++	{0, 0x098A, 0xCE7},
++	{0, 0x0990, 0x3C3C},
++	{0, 0x0992, 0x3C3C},
++	{0, 0x0994, 0x3C5F},
++	{0, 0x0996, 0x4F30},
++	{0, 0x0998, 0xED08},
++	{0, 0x099a, 0xBD61},
++	{0, 0x099c, 0xD5CE},
++	{0, 0x099e, 0x4CD},
++	{0, 0x098A, 0xCF7},
++	{0, 0x0990, 0x1F17},
++	{0, 0x0992, 0x211},
++	{0, 0x0994, 0xCC33},
++	{0, 0x0996, 0x2E30},
++	{0, 0x0998, 0xED02},
++	{0, 0x099a, 0xCCFF},
++	{0, 0x099c, 0xFDED},
++	{0, 0x099e, 0xCC},
++	{0, 0x098A, 0xD07},
++	{0, 0x0990, 0x2},
++	{0, 0x0992, 0xBD70},
++	{0, 0x0994, 0x6D18},
++	{0, 0x0996, 0xDE1F},
++	{0, 0x0998, 0x181F},
++	{0, 0x099a, 0x8E01},
++	{0, 0x099c, 0x10CC},
++	{0, 0x099e, 0x3C52},
++	{0, 0x098A, 0xD17},
++	{0, 0x0990, 0x30ED},
++	{0, 0x0992, 0x18},
++	{0, 0x0994, 0xECA0},
++	{0, 0x0996, 0xC4FD},
++	{0, 0x0998, 0xBD70},
++	{0, 0x099a, 0x2120},
++	{0, 0x099c, 0x1ECC},
++	{0, 0x099e, 0x3C52},
++	{0, 0x098A, 0xD27},
++	{0, 0x0990, 0x30ED},
++	{0, 0x0992, 0xDE},
++	{0, 0x0994, 0x1FEC},
++	{0, 0x0996, 0xA0BD},
++	{0, 0x0998, 0x7021},
++	{0, 0x099a, 0xCC3C},
++	{0, 0x099c, 0x5230},
++	{0, 0x099e, 0xED02},
++	{0, 0x098A, 0xD37},
++	{0, 0x0990, 0xCCFF},
++	{0, 0x0992, 0xFCED},
++	{0, 0x0994, 0xCC},
++	{0, 0x0996, 0x2},
++	{0, 0x0998, 0xBD70},
++	{0, 0x099a, 0x6DFC},
++	{0, 0x099c, 0x4E1},
++	{0, 0x099e, 0x1A83},
++	{0, 0x098A, 0xD47},
++	{0, 0x0990, 0x1},
++	{0, 0x0992, 0x2720},
++	{0, 0x0994, 0x1A83},
++	{0, 0x0996, 0x4},
++	{0, 0x0998, 0x271E},
++	{0, 0x099a, 0x1A83},
++	{0, 0x099c, 0x8},
++	{0, 0x099e, 0x271C},
++	{0, 0x098A, 0xD57},
++	{0, 0x0990, 0x1A83},
++	{0, 0x0992, 0x10},
++	{0, 0x0994, 0x271A},
++	{0, 0x0996, 0x1A83},
++	{0, 0x0998, 0x20},
++	{0, 0x099a, 0x2718},
++	{0, 0x099c, 0x1A83},
++	{0, 0x099e, 0x40},
++	{0, 0x098A, 0xD67},
++	{0, 0x0990, 0x2716},
++	{0, 0x0992, 0x2019},
++	{0, 0x0994, 0xC61E},
++	{0, 0x0996, 0x2012},
++	{0, 0x0998, 0xC622},
++	{0, 0x099a, 0x200E},
++	{0, 0x099c, 0xC621},
++	{0, 0x099e, 0x200A},
++	{0, 0x098A, 0xD77},
++	{0, 0x0990, 0xC620},
++	{0, 0x0992, 0x2006},
++	{0, 0x0994, 0xC62A},
++	{0, 0x0996, 0x2002},
++	{0, 0x0998, 0xC62B},
++	{0, 0x099a, 0x30ED},
++	{0, 0x099c, 0x8CC},
++	{0, 0x099e, 0x3400},
++	{0, 0x098A, 0xD87},
++	{0, 0x0990, 0x30ED},
++	{0, 0x0992, 0x34},
++	{0, 0x0994, 0xBD6F},
++	{0, 0x0996, 0xD184},
++	{0, 0x0998, 0x330},
++	{0, 0x099a, 0xED07},
++	{0, 0x099c, 0xA60A},
++	{0, 0x099e, 0x4848},
++	{0, 0x098A, 0xD97},
++	{0, 0x0990, 0x5FED},
++	{0, 0x0992, 0x5EA},
++	{0, 0x0994, 0x8AA},
++	{0, 0x0996, 0x731},
++	{0, 0x0998, 0xBD70},
++	{0, 0x099a, 0x2130},
++	{0, 0x099c, 0xC60A},
++	{0, 0x099e, 0x3A35},
++	{0, 0x098A, 0xDA7},
++	{0, 0x0990, 0x3937},
++	{0, 0x0992, 0x3C3C},
++	{0, 0x0994, 0x3C34},
++	{0, 0x0996, 0xDE2F},
++	{0, 0x0998, 0xEE0E},
++	{0, 0x099a, 0xAD00},
++	{0, 0x099c, 0x7D13},
++	{0, 0x099e, 0xEF27},
++	{0, 0x098A, 0xDB7},
++	{0, 0x0990, 0x7CCE},
++	{0, 0x0992, 0x13E0},
++	{0, 0x0994, 0x1E05},
++	{0, 0x0996, 0x1060},
++	{0, 0x0998, 0xE60E},
++	{0, 0x099a, 0x4FC3},
++	{0, 0x099c, 0x13F0},
++	{0, 0x099e, 0x8FE6},
++	{0, 0x098A, 0xDC7},
++	{0, 0x0990, 0x30},
++	{0, 0x0992, 0xE107},
++	{0, 0x0994, 0x2216},
++	{0, 0x0996, 0xF613},
++	{0, 0x0998, 0xEE4F},
++	{0, 0x099a, 0xC313},
++	{0, 0x099c, 0xF38F},
++	{0, 0x099e, 0xE600},
++	{0, 0x098A, 0xDD7},
++	{0, 0x0990, 0x30E1},
++	{0, 0x0992, 0x725},
++	{0, 0x0994, 0x7F6},
++	{0, 0x0996, 0x13EE},
++	{0, 0x0998, 0xC103},
++	{0, 0x099a, 0x253C},
++	{0, 0x099c, 0x7F13},
++	{0, 0x099e, 0xEEF6},
++	{0, 0x098A, 0xDE7},
++	{0, 0x0990, 0x13EF},
++	{0, 0x0992, 0xE706},
++	{0, 0x0994, 0xCC13},
++	{0, 0x0996, 0xF0ED},
++	{0, 0x0998, 0x4CC},
++	{0, 0x099a, 0x13F3},
++	{0, 0x099c, 0x200F},
++	{0, 0x099e, 0x7C13},
++	{0, 0x098A, 0xDF7},
++	{0, 0x0990, 0xEEEC},
++	{0, 0x0992, 0x4C3},
++	{0, 0x0994, 0x1},
++	{0, 0x0996, 0xED04},
++	{0, 0x0998, 0xEC02},
++	{0, 0x099a, 0xC300},
++	{0, 0x099c, 0x1ED},
++	{0, 0x099e, 0x2F6},
++	{0, 0x098A, 0xE07},
++	{0, 0x0990, 0x13EE},
++	{0, 0x0992, 0xE106},
++	{0, 0x0994, 0x2412},
++	{0, 0x0996, 0xEE04},
++	{0, 0x0998, 0xE600},
++	{0, 0x099a, 0x30E1},
++	{0, 0x099c, 0x722},
++	{0, 0x099e, 0xDFEE},
++	{0, 0x098A, 0xE17},
++	{0, 0x0990, 0x2E6},
++	{0, 0x0992, 0x30},
++	{0, 0x0994, 0xE107},
++	{0, 0x0996, 0x25D6},
++	{0, 0x0998, 0xDE49},
++	{0, 0x099a, 0xEE08},
++	{0, 0x099c, 0xAD00},
++	{0, 0x099e, 0xCC13},
++	{0, 0x098A, 0xE27},
++	{0, 0x0990, 0xF630},
++	{0, 0x0992, 0xED00},
++	{0, 0x0994, 0xDE2F},
++	{0, 0x0996, 0xEE10},
++	{0, 0x0998, 0xCC13},
++	{0, 0x099a, 0xFAAD},
++	{0, 0x099c, 0x38},
++	{0, 0x099e, 0x3838},
++	{0, 0x098A, 0xE37},
++	{0, 0x0990, 0x3839},
++	{0, 0x098A, 0x1000},
++	{0, 0x0990, 0xCC10},
++	{0, 0x0992, 0x9BD},
++	{0, 0x0994, 0x4224},
++	{0, 0x0996, 0x7E10},
++	{0, 0x0998, 0x9C6},
++	{0, 0x099a, 0x1F7},
++	{0, 0x099c, 0x18A},
++	{0, 0x099e, 0xC606},
++	{0, 0x098A, 0x1010},
++	{0, 0x0990, 0xF701},
++	{0, 0x0992, 0x8BDE},
++	{0, 0x0994, 0x3F18},
++	{0, 0x0996, 0xCE0B},
++	{0, 0x0998, 0xF1CC},
++	{0, 0x099a, 0x11},
++	{0, 0x099c, 0xBDD7},
++	{0, 0x099e, 0xCC},
++	{0, 0x098A, 0x1020},
++	{0, 0x0990, 0xBF1},
++	{0, 0x0992, 0xDD3F},
++	{0, 0x0994, 0xDE35},
++	{0, 0x0996, 0x18CE},
++	{0, 0x0998, 0xC03},
++	{0, 0x099a, 0xCC00},
++	{0, 0x099c, 0x3FBD},
++	{0, 0x099e, 0xD700},
++	{0, 0x098A, 0x1030},
++	{0, 0x0990, 0xCC0C},
++	{0, 0x0992, 0x3DD},
++	{0, 0x0994, 0x35DE},
++	{0, 0x0996, 0x4718},
++	{0, 0x0998, 0xCE0C},
++	{0, 0x099a, 0x43CC},
++	{0, 0x099c, 0x15},
++	{0, 0x099e, 0xBDD7},
++	{0, 0x098A, 0x1040},
++	{0, 0x0990, 0xCC},
++	{0, 0x0992, 0xC43},
++	{0, 0x0994, 0xDD47},
++	{0, 0x0996, 0xFE00},
++	{0, 0x0998, 0x3318},
++	{0, 0x099a, 0xCE0C},
++	{0, 0x099c, 0x59CC},
++	{0, 0x099e, 0x9},
++	{0, 0x098A, 0x1050},
++	{0, 0x0990, 0xBDD7},
++	{0, 0x0992, 0xCC},
++	{0, 0x0994, 0xC59},
++	{0, 0x0996, 0xFD00},
++	{0, 0x0998, 0x33DE},
++	{0, 0x099a, 0x4118},
++	{0, 0x099c, 0xCE0C},
++	{0, 0x099e, 0x63CC},
++	{0, 0x098A, 0x1060},
++	{0, 0x0990, 0xD},
++	{0, 0x0992, 0xBDD7},
++	{0, 0x0994, 0xCC},
++	{0, 0x0996, 0xC63},
++	{0, 0x0998, 0xDD41},
++	{0, 0x099a, 0xFE00},
++	{0, 0x099c, 0x3118},
++	{0, 0x099e, 0xCE0C},
++	{0, 0x098A, 0x1070},
++	{0, 0x0990, 0x71CC},
++	{0, 0x0992, 0x29},
++	{0, 0x0994, 0xBDD7},
++	{0, 0x0996, 0xCC},
++	{0, 0x0998, 0xC71},
++	{0, 0x099a, 0xFD00},
++	{0, 0x099c, 0x31DE},
++	{0, 0x099e, 0x3918},
++	{0, 0x098A, 0x1080},
++	{0, 0x0990, 0xCE0C},
++	{0, 0x0992, 0x9BCC},
++	{0, 0x0994, 0x23},
++	{0, 0x0996, 0xBDD7},
++	{0, 0x0998, 0xCC},
++	{0, 0x099a, 0xC9B},
++	{0, 0x099c, 0xDD39},
++	{0, 0x099e, 0xDE49},
++	{0, 0x098A, 0x1090},
++	{0, 0x0990, 0x18CE},
++	{0, 0x0992, 0xCBF},
++	{0, 0x0994, 0xCC00},
++	{0, 0x0996, 0xDBD},
++	{0, 0x0998, 0xD700},
++	{0, 0x099a, 0xCC0C},
++	{0, 0x099c, 0xBFDD},
++	{0, 0x099e, 0x49CC},
++	{0, 0x098A, 0x10A0},
++	{0, 0x0990, 0x1162},
++	{0, 0x0992, 0xFD0B},
++	{0, 0x0994, 0xFDCC},
++	{0, 0x0996, 0xCE7},
++	{0, 0x0998, 0xFD0C},
++	{0, 0x099a, 0x1FCC},
++	{0, 0x099c, 0x1245},
++	{0, 0x099e, 0xFD0C},
++	{0, 0x098A, 0x10B0},
++	{0, 0x0990, 0x51CC},
++	{0, 0x0992, 0x110B},
++	{0, 0x0994, 0xFD0C},
++	{0, 0x0996, 0x5BCC},
++	{0, 0x0998, 0x1108},
++	{0, 0x099a, 0xFD0C},
++	{0, 0x099c, 0x65CC},
++	{0, 0x099e, 0x10D0},
++	{0, 0x098A, 0x10C0},
++	{0, 0x0990, 0xFD0C},
++	{0, 0x0992, 0x7BCC},
++	{0, 0x0994, 0x12DE},
++	{0, 0x0996, 0xFD0C},
++	{0, 0x0998, 0xA7CC},
++	{0, 0x099a, 0xDA8},
++	{0, 0x099c, 0xFD0C},
++	{0, 0x099e, 0xCB39},
++	{0, 0x098A, 0x10D0},
++	{0, 0x0990, 0x37DE},
++	{0, 0x0992, 0x1DEC},
++	{0, 0x0994, 0xC5F},
++	{0, 0x0996, 0x8402},
++	{0, 0x0998, 0x4416},
++	{0, 0x099a, 0x4FF7},
++	{0, 0x099c, 0xCCD},
++	{0, 0x099e, 0xE60B},
++	{0, 0x098A, 0x10E0},
++	{0, 0x0990, 0xC407},
++	{0, 0x0992, 0xF70C},
++	{0, 0x0994, 0xCE7F},
++	{0, 0x0996, 0x30C4},
++	{0, 0x0998, 0xEC25},
++	{0, 0x099a, 0xFD30},
++	{0, 0x099c, 0xC5FC},
++	{0, 0x099e, 0x6D6},
++	{0, 0x098A, 0x10F0},
++	{0, 0x0990, 0xFD30},
++	{0, 0x0992, 0xC701},
++	{0, 0x0994, 0xFC30},
++	{0, 0x0996, 0xC0FD},
++	{0, 0x0998, 0xBED},
++	{0, 0x099a, 0xFC30},
++	{0, 0x099c, 0xC2FD},
++	{0, 0x099e, 0xBEF},
++	{0, 0x098A, 0x1100},
++	{0, 0x0990, 0x30E6},
++	{0, 0x0992, 0xBD},
++	{0, 0x0994, 0x5203},
++	{0, 0x0996, 0x3139},
++	{0, 0x0998, 0x7E9E},
++	{0, 0x099a, 0x143C},
++	{0, 0x099c, 0x3C3C},
++	{0, 0x099e, 0x2101},
++	{0, 0x098A, 0x1110},
++	{0, 0x0990, 0xCC00},
++	{0, 0x0992, 0x18BD},
++	{0, 0x0994, 0x6FD1},
++	{0, 0x0996, 0xC504},
++	{0, 0x0998, 0x26F5},
++	{0, 0x099a, 0xDC25},
++	{0, 0x099c, 0x30ED},
++	{0, 0x099e, 0x420},
++	{0, 0x098A, 0x1120},
++	{0, 0x0990, 0x12EE},
++	{0, 0x0992, 0x43C},
++	{0, 0x0994, 0x1838},
++	{0, 0x0996, 0xE621},
++	{0, 0x0998, 0x18E7},
++	{0, 0x099a, 0xBE30},
++	{0, 0x099c, 0xEE04},
++	{0, 0x099e, 0xEC1D},
++	{0, 0x098A, 0x1130},
++	{0, 0x0990, 0x30ED},
++	{0, 0x0992, 0x4EC},
++	{0, 0x0994, 0x426},
++	{0, 0x0996, 0xEACC},
++	{0, 0x0998, 0x1A},
++	{0, 0x099a, 0xED02},
++	{0, 0x099c, 0xCCFB},
++	{0, 0x099e, 0xFFED},
++	{0, 0x098A, 0x1140},
++	{0, 0x0990, 0xCC},
++	{0, 0x0992, 0x400},
++	{0, 0x0994, 0xBD70},
++	{0, 0x0996, 0x6DCC},
++	{0, 0x0998, 0x1A},
++	{0, 0x099a, 0x30ED},
++	{0, 0x099c, 0x2CC},
++	{0, 0x099e, 0xFBFF},
++	{0, 0x098A, 0x1150},
++	{0, 0x0990, 0xED00},
++	{0, 0x0992, 0x5F4F},
++	{0, 0x0994, 0xBD70},
++	{0, 0x0996, 0x6D5F},
++	{0, 0x0998, 0xBD5B},
++	{0, 0x099a, 0x17BD},
++	{0, 0x099c, 0x558B},
++	{0, 0x099e, 0x3838},
++	{0, 0x098A, 0x1160},
++	{0, 0x0990, 0x3839},
++	{0, 0x0992, 0x3C3C},
++	{0, 0x0994, 0xC640},
++	{0, 0x0996, 0xF730},
++	{0, 0x0998, 0xC4FC},
++	{0, 0x099a, 0xBED},
++	{0, 0x099c, 0xFD30},
++	{0, 0x099e, 0xC0FC},
++	{0, 0x098A, 0x1170},
++	{0, 0x0990, 0xBEF},
++	{0, 0x0992, 0xFD30},
++	{0, 0x0994, 0xC2DE},
++	{0, 0x0996, 0x1DEC},
++	{0, 0x0998, 0x25FD},
++	{0, 0x099a, 0x30C5},
++	{0, 0x099c, 0x101},
++	{0, 0x099e, 0x1FC},
++	{0, 0x098A, 0x1180},
++	{0, 0x0990, 0x30C2},
++	{0, 0x0992, 0xFD06},
++	{0, 0x0994, 0xD6EC},
++	{0, 0x0996, 0xC5F},
++	{0, 0x0998, 0x8402},
++	{0, 0x099a, 0x4416},
++	{0, 0x099c, 0x4F30},
++	{0, 0x099e, 0xE703},
++	{0, 0x098A, 0x1190},
++	{0, 0x0990, 0xF10C},
++	{0, 0x0992, 0xCD27},
++	{0, 0x0994, 0x15F1},
++	{0, 0x0996, 0xCCD},
++	{0, 0x0998, 0x2309},
++	{0, 0x099a, 0xFC06},
++	{0, 0x099c, 0xD604},
++	{0, 0x099e, 0xFD06},
++	{0, 0x098A, 0x11A0},
++	{0, 0x0990, 0xD620},
++	{0, 0x0992, 0x7FC},
++	{0, 0x0994, 0x6D6},
++	{0, 0x0996, 0x5FD},
++	{0, 0x0998, 0x6D6},
++	{0, 0x099a, 0xDE1D},
++	{0, 0x099c, 0xE60B},
++	{0, 0x099e, 0xC407},
++	{0, 0x098A, 0x11B0},
++	{0, 0x0990, 0x30E7},
++	{0, 0x0992, 0x2F1},
++	{0, 0x0994, 0xCCE},
++	{0, 0x0996, 0x272C},
++	{0, 0x0998, 0x7D0C},
++	{0, 0x099a, 0xCE27},
++	{0, 0x099c, 0x275D},
++	{0, 0x099e, 0x2724},
++	{0, 0x098A, 0x11C0},
++	{0, 0x0990, 0x7F30},
++	{0, 0x0992, 0xC4FC},
++	{0, 0x0994, 0x6D6},
++	{0, 0x0996, 0xFD30},
++	{0, 0x0998, 0xC5F6},
++	{0, 0x099a, 0xCCE},
++	{0, 0x099c, 0x4FFD},
++	{0, 0x099e, 0x30C7},
++	{0, 0x098A, 0x11D0},
++	{0, 0x0990, 0xC640},
++	{0, 0x0992, 0xF730},
++	{0, 0x0994, 0xC4E6},
++	{0, 0x0996, 0x24F},
++	{0, 0x0998, 0xFD30},
++	{0, 0x099a, 0xC501},
++	{0, 0x099c, 0x101},
++	{0, 0x099e, 0xFC30},
++	{0, 0x098A, 0x11E0},
++	{0, 0x0990, 0xC2FD},
++	{0, 0x0992, 0x6D6},
++	{0, 0x0994, 0x7D06},
++	{0, 0x0996, 0xCB27},
++	{0, 0x0998, 0x2EC6},
++	{0, 0x099a, 0x40F7},
++	{0, 0x099c, 0x30C4},
++	{0, 0x099e, 0xFC06},
++	{0, 0x098A, 0x11F0},
++	{0, 0x0990, 0xC104},
++	{0, 0x0992, 0xF306},
++	{0, 0x0994, 0xD6ED},
++	{0, 0x0996, 0x5F},
++	{0, 0x0998, 0x6D00},
++	{0, 0x099a, 0x2A01},
++	{0, 0x099c, 0x5317},
++	{0, 0x099e, 0xFD30},
++	{0, 0x098A, 0x1200},
++	{0, 0x0990, 0xC0EC},
++	{0, 0x0992, 0xFD},
++	{0, 0x0994, 0x30C2},
++	{0, 0x0996, 0xFC06},
++	{0, 0x0998, 0xC1FD},
++	{0, 0x099a, 0x30C5},
++	{0, 0x099c, 0x101},
++	{0, 0x099e, 0x1FC},
++	{0, 0x098A, 0x1210},
++	{0, 0x0990, 0x30C2},
++	{0, 0x0992, 0xFD06},
++	{0, 0x0994, 0xC720},
++	{0, 0x0996, 0x227F},
++	{0, 0x0998, 0x30C4},
++	{0, 0x099a, 0xDE1D},
++	{0, 0x099c, 0xEC25},
++	{0, 0x099e, 0xFD30},
++	{0, 0x098A, 0x1220},
++	{0, 0x0990, 0xC5FC},
++	{0, 0x0992, 0x6D6},
++	{0, 0x0994, 0xFD30},
++	{0, 0x0996, 0xC701},
++	{0, 0x0998, 0xFC30},
++	{0, 0x099a, 0xC0FD},
++	{0, 0x099c, 0x6D0},
++	{0, 0x099e, 0xFC30},
++	{0, 0x098A, 0x1230},
++	{0, 0x0990, 0xC2FD},
++	{0, 0x0992, 0x6D2},
++	{0, 0x0994, 0xEC25},
++	{0, 0x0996, 0xFD06},
++	{0, 0x0998, 0xC3BD},
++	{0, 0x099a, 0x953C},
++	{0, 0x099c, 0xDE3F},
++	{0, 0x099e, 0xEE10},
++	{0, 0x098A, 0x1240},
++	{0, 0x0990, 0xAD00},
++	{0, 0x0992, 0x3838},
++	{0, 0x0994, 0x3930},
++	{0, 0x0996, 0x8FC3},
++	{0, 0x0998, 0xFFE9},
++	{0, 0x099a, 0x8F35},
++	{0, 0x099c, 0xBDAD},
++	{0, 0x099e, 0x1530},
++	{0, 0x098A, 0x1250},
++	{0, 0x0990, 0x6F16},
++	{0, 0x0992, 0x18DE},
++	{0, 0x0994, 0x1918},
++	{0, 0x0996, 0x8FC3},
++	{0, 0x0998, 0x14B},
++	{0, 0x099a, 0x188F},
++	{0, 0x099c, 0x18EC},
++	{0, 0x099e, 0xFD},
++	{0, 0x098A, 0x1260},
++	{0, 0x0990, 0x50E},
++	{0, 0x0992, 0x18EC},
++	{0, 0x0994, 0x2FD},
++	{0, 0x0996, 0x510},
++	{0, 0x0998, 0xE616},
++	{0, 0x099a, 0x4FED},
++	{0, 0x099c, 0x418},
++	{0, 0x099e, 0x8FC3},
++	{0, 0x098A, 0x1270},
++	{0, 0x0990, 0xFFCB},
++	{0, 0x0992, 0xE304},
++	{0, 0x0994, 0x8FE6},
++	{0, 0x0996, 0xF7},
++	{0, 0x0998, 0x514},
++	{0, 0x099a, 0x18DE},
++	{0, 0x099c, 0x1930},
++	{0, 0x099e, 0xE616},
++	{0, 0x098A, 0x1280},
++	{0, 0x0990, 0x4FED},
++	{0, 0x0992, 0x418},
++	{0, 0x0994, 0x8FC3},
++	{0, 0x0996, 0x119},
++	{0, 0x0998, 0xE304},
++	{0, 0x099a, 0x8FE6},
++	{0, 0x099c, 0xF7},
++	{0, 0x099e, 0x515},
++	{0, 0x098A, 0x1290},
++	{0, 0x0990, 0xFC05},
++	{0, 0x0992, 0x5BFD},
++	{0, 0x0994, 0x512},
++	{0, 0x0996, 0xDE37},
++	{0, 0x0998, 0xEE08},
++	{0, 0x099a, 0xAD00},
++	{0, 0x099c, 0x30E6},
++	{0, 0x099e, 0x164F},
++	{0, 0x098A, 0x12A0},
++	{0, 0x0990, 0x5ED},
++	{0, 0x0992, 0x48F},
++	{0, 0x0994, 0xC300},
++	{0, 0x0996, 0x630},
++	{0, 0x0998, 0xE304},
++	{0, 0x099a, 0x8FF6},
++	{0, 0x099c, 0x516},
++	{0, 0x099e, 0x4FED},
++	{0, 0x098A, 0x12B0},
++	{0, 0x0990, 0x30},
++	{0, 0x0992, 0x6C16},
++	{0, 0x0994, 0xE616},
++	{0, 0x0996, 0xC103},
++	{0, 0x0998, 0x2598},
++	{0, 0x099a, 0xCC32},
++	{0, 0x099c, 0x8EED},
++	{0, 0x099e, 0xEC},
++	{0, 0x098A, 0x12C0},
++	{0, 0x0990, 0x6BD},
++	{0, 0x0992, 0x7021},
++	{0, 0x0994, 0xCC32},
++	{0, 0x0996, 0x6C30},
++	{0, 0x0998, 0xED02},
++	{0, 0x099a, 0xCCF8},
++	{0, 0x099c, 0xED},
++	{0, 0x099e, 0xA6},
++	{0, 0x098A, 0x12D0},
++	{0, 0x0990, 0x9E3},
++	{0, 0x0992, 0xA84},
++	{0, 0x0994, 0x7BD},
++	{0, 0x0996, 0x706D},
++	{0, 0x0998, 0x30C6},
++	{0, 0x099a, 0x173A},
++	{0, 0x099c, 0x3539},
++	{0, 0x099e, 0x3CBD},
++	{0, 0x098A, 0x12E0},
++	{0, 0x0990, 0x776D},
++	{0, 0x0992, 0xCC32},
++	{0, 0x0994, 0x5C30},
++	{0, 0x0996, 0xED00},
++	{0, 0x0998, 0xFC13},
++	{0, 0x099a, 0x8683},
++	{0, 0x099c, 0x1},
++	{0, 0x099e, 0xBD70},
++	{0, 0x098A, 0x12F0},
++	{0, 0x0990, 0x21CC},
++	{0, 0x0992, 0x325E},
++	{0, 0x0994, 0x30ED},
++	{0, 0x0996, 0xFC},
++	{0, 0x0998, 0x1388},
++	{0, 0x099a, 0x8300},
++	{0, 0x099c, 0x1BD},
++	{0, 0x099e, 0x7021},
++	{0, 0x098A, 0x1300},
++	{0, 0x0990, 0x3839},
++	{0, 0x098E, 0x0010},
++	{0, 0x0990, 0x1000},
++	{0, 0x098E, 0x0003},
++	{100, 0x0990, 0x0004}
++};
++
++mt9t111_regs def_regs1[] ={
++	{0, 0x001A, 0x0218},
++	{0, 0x001E, 0x0777},
++	{0, 0x3084, 0x2409},
++	{0, 0x3092, 0x0A49},
++	{0, 0x3094, 0x4949},
++	{0, 0x3096, 0x4950},
++	{0, 0x0018, 0x402D},
++	{100, 0x0018, 0x402C},
++	{0, 0x098E, 0x6800},
++	{0, 0x0990, 0x0280},
++	{0, 0x098E, 0x6802},
++	{0, 0x0990, 0x01E0},
++	{0, 0x098E, 0xE88E},
++	{0, 0x0990, 0x0000},
++	{0, 0x098E, 0x68A0},
++	{0, 0x0990, 0x082D},
++	{0, 0x098E, 0x4802},
++	{0, 0x0990, 0x0000},
++	{0, 0x098E, 0x4804},
++	{0, 0x0990, 0x0000},
++	{0, 0x098E, 0x4806},
++	{0, 0x0990, 0x060D},
++	{0, 0x098E, 0x4808},
++	{0, 0x0990, 0x080D},
++	{0, 0x098E, 0x480A},
++	{0, 0x0990, 0x0111},
++	{0, 0x098E, 0x480C},
++	{0, 0x0990, 0x046C},
++	{0, 0x098E, 0x480F},
++	{0, 0x0990, 0x00CC},
++	{0, 0x098E, 0x4811},
++	{0, 0x0990, 0x0381},
++	{0, 0x098E, 0x4813},
++	{0, 0x0990, 0x024F},
++	{0, 0x098E, 0x481D},
++	{0, 0x0990, 0x05AE},
++	{0, 0x098E, 0x481F},
++	{0, 0x0990, 0x05D0},
++	{0, 0x098E, 0x4825},
++	{0, 0x0990, 0x07AC},
++	{0, 0x098E, 0x6C00},
++	{0, 0x0990, 0x0800},
++	{0, 0x098E, 0x6C02},
++	{0, 0x0990, 0x0600},
++	{0, 0x098E, 0xEC8E},
++	{0, 0x0990, 0x0000},
++	{0, 0x098E, 0x6CA0},
++	{0, 0x0990, 0x082D},
++	{0, 0x098E, 0x484A},
++	{0, 0x0990, 0x0000},
++	{0, 0x098E, 0x484C},
++	{0, 0x0990, 0x0000},
++	{0, 0x098E, 0x484E},
++	{0, 0x0990, 0x060D},
++	{0, 0x098E, 0x4850},
++	{0, 0x0990, 0x080D},
++	{0, 0x098E, 0x4852},
++	{0, 0x0990, 0x0111},
++	{0, 0x098E, 0x4854},
++	{0, 0x0990, 0x146C},
++	{0, 0x098E, 0x4857},
++	{0, 0x0990, 0x00CC},
++	{0, 0x098E, 0x4859},
++	{0, 0x0990, 0x0381},
++	{0, 0x098E, 0x485B},
++	{0, 0x0990, 0x024F},
++	{0, 0x098E, 0x4865},
++	{0, 0x0990, 0x05AE},
++	{0, 0x098E, 0x4867},
++	{0, 0x0990, 0x05D0},
++	{0, 0x098E, 0x486D},
++	{0, 0x0990, 0x07AC},
++	{0, 0x098E, 0xC8A5},
++	{0, 0x0990, 0x001D},
++	{0, 0x098E, 0xC8A6},
++	{0, 0x0990, 0x0020},
++	{0, 0x098E, 0xC8A7},
++	{0, 0x0990, 0x0023},
++	{0, 0x098E, 0xC8A8},
++	{0, 0x0990, 0x0026},
++	{0, 0x098E, 0xC844},
++	{0, 0x0990, 0x0091},
++	{0, 0x098E, 0xC92F},
++	{0, 0x0990, 0x0000},
++	{0, 0x098E, 0xC845},
++	{0, 0x0990, 0x0079},
++	{0, 0x098E, 0xC92D},
++	{0, 0x0990, 0x0000},
++	{0, 0x098E, 0xC88C},
++	{0, 0x0990, 0x0091},
++	{0, 0x098E, 0xC930},
++	{0, 0x0990, 0x0000},
++	{0, 0x098E, 0xC88D},
++	{0, 0x0990, 0x0079},
++	{0, 0x098E, 0xC92E},
++	{0, 0x0990, 0x0000},
++	{0, 0x098E, 0xA002},
++	{0, 0x0990, 0x0010},
++	{0, 0x098E, 0xA009},
++	{0, 0x0990, 0x0002},
++	{0, 0x098E, 0xA00A},
++	{0, 0x0990, 0x0003},
++	{0, 0x098E, 0xA00C},
++	{0, 0x0990, 0x000A},
++	{0, 0x098E, 0x4846},
++	{0, 0x0990, 0x0014},
++	{0, 0x098E, 0x68AA},
++	{0, 0x0990, 0x0278},
++	{0, 0x098E, 0x488E},
++	{0, 0x0990, 0x0014},
++	{0, 0x098E, 0x6CAA},
++	{0, 0x0990, 0x0218},
++	{0, 0x098E, 0x8400},
++	{0, 0x0990, 0x0006},
++	{0, 0x098E, 0x8400},
++	{0, 0x0990, 0x0005},
++	{0, 0x3C20, 0x0001},
++	{0, 0x364A, 0x7D2F},
++	{0, 0x364C, 0x79EB},
++	{0, 0x364E, 0x18D2},
++	{0, 0x3650, 0x9F8F},
++	{0, 0x3652, 0xA7D2},
++	{0, 0x368A, 0x460C},
++	{0, 0x368C, 0x14F0},
++	{0, 0x368E, 0x946F},
++	{0, 0x3690, 0xC471},
++	{0, 0x3692, 0x04B1},
++	{0, 0x36CA, 0x0433},
++	{0, 0x36CC, 0x680D},
++	{0, 0x36CE, 0xEEF3},
++	{0, 0x36D0, 0x4850},
++	{0, 0x36D2, 0xF233},
++	{0, 0x370A, 0xB2AF},
++	{0, 0x370C, 0x2CF0},
++	{0, 0x370E, 0x3F10},
++	{0, 0x3710, 0xC673},
++	{0, 0x3712, 0xA972},
++	{0, 0x374A, 0x0590},
++	{0, 0x374C, 0xAFB3},
++	{0, 0x374E, 0x93D7},
++	{0, 0x3750, 0x8D12},
++	{0, 0x3752, 0x2539},
++	{0, 0x3640, 0x0350},
++	{0, 0x3642, 0x322C},
++	{0, 0x3644, 0x77D1},
++	{0, 0x3646, 0xA26F},
++	{0, 0x3648, 0xC872},
++	{0, 0x3680, 0x0C4C},
++	{0, 0x3682, 0x9510},
++	{0, 0x3684, 0x110E},
++	{0, 0x3686, 0x4331},
++	{0, 0x3688, 0xC1CF},
++	{0, 0x36C0, 0x6152},
++	{0, 0x36C2, 0x038E},
++	{0, 0x36C4, 0x9AF4},
++	{0, 0x36C6, 0xE12F},
++	{0, 0x36C8, 0x09F3},
++	{0, 0x3700, 0xC5AF},
++	{0, 0x3702, 0xCA90},
++	{0, 0x3704, 0x5D0F},
++	{0, 0x3706, 0x3293},
++	{0, 0x3708, 0x2B92},
++	{0, 0x3740, 0xC590},
++	{0, 0x3742, 0x8133},
++	{0, 0x3744, 0xE0F6},
++	{0, 0x3746, 0x0254},
++	{0, 0x3748, 0x10B9},
++	{0, 0x3654, 0x7F8F},
++	{0, 0x3656, 0x6F6C},
++	{0, 0x3658, 0x5971},
++	{0, 0x365A, 0x9A0F},
++	{0, 0x365C, 0xA1B2},
++	{0, 0x3694, 0xB00C},
++	{0, 0x3696, 0xEBCF},
++	{0, 0x3698, 0x06AD},
++	{0, 0x369A, 0x4D31},
++	{0, 0x369C, 0x2A4E},
++	{0, 0x36D4, 0x4752},
++	{0, 0x36D6, 0x724D},
++	{0, 0x36D8, 0xAD34},
++	{0, 0x36DA, 0x1350},
++	{0, 0x36DC, 0x4E94},
++	{0, 0x3714, 0xA06E},
++	{0, 0x3716, 0x9152},
++	{0, 0x3718, 0x1F53},
++	{0, 0x371A, 0x3933},
++	{0, 0x371C, 0xBA94},
++	{0, 0x3754, 0x1233},
++	{0, 0x3756, 0xA032},
++	{0, 0x3758, 0xE936},
++	{0, 0x375A, 0xBE34},
++	{0, 0x375C, 0x02D9},
++	{0, 0x365E, 0x7DEF},
++	{0, 0x3660, 0x434B},
++	{0, 0x3662, 0x69F1},
++	{0, 0x3664, 0x8A0F},
++	{0, 0x3666, 0xBDB2},
++	{0, 0x369E, 0x290D},
++	{0, 0x36A0, 0x42CF},
++	{0, 0x36A2, 0xDC6D},
++	{0, 0x36A4, 0x91B1},
++	{0, 0x36A6, 0x9DE9},
++	{0, 0x36DE, 0x70B2},
++	{0, 0x36E0, 0x02AC},
++	{0, 0x36E2, 0x9714},
++	{0, 0x36E4, 0xF3CF},
++	{0, 0x36E6, 0x6BD1},
++	{0, 0x371E, 0xE42E},
++	{0, 0x3720, 0x1D32},
++	{0, 0x3722, 0xCC31},
++	{0, 0x3724, 0xAE94},
++	{0, 0x3726, 0x6413},
++	{0, 0x375E, 0xE290},
++	{0, 0x3760, 0x8F53},
++	{0, 0x3762, 0xF936},
++	{0, 0x3764, 0x4614},
++	{0, 0x3766, 0x1B59},
++	{0, 0x3784, 0x0404},
++	{0, 0x3782, 0x0304},
++	{0, 0x3210, 0x01B8},
++	{0, 0x098E, 0xC913},
++	{0, 0x0990, 0x000A},
++	{0, 0x098E, 0x686B},
++	{0, 0x0990, 0x05DC},
++	{0, 0x098E, 0x686D},
++	{0, 0x0990, 0x0BB8},
++	{0, 0x098E, 0x6C6B},
++	{0, 0x0990, 0x05DC},
++	{0, 0x098E, 0x6C6D},
++	{0, 0x0990, 0x0BB8},
++	{0, 0x098E, 0x3439},
++	{0, 0x0990, 0x05DC},
++	{0, 0x098E, 0x343B},
++	{0, 0x0990, 0x0BB8},
++	{0, 0x098E, 0x4926},
++	{0, 0x0990, 0x0001},
++	{0, 0x098E, 0x4928},
++	{0, 0x0990, 0x0002},
++	{0, 0x098E, 0x492A},
++	{0, 0x0990, 0x0656},
++	{0, 0x098E, 0x4D26},
++	{0, 0x0990, 0x0001},
++	{0, 0x098E, 0x4D28},
++	{0, 0x0990, 0x0002},
++	{0, 0x098E, 0x4D2A},
++	{0, 0x0990, 0x0656},
++	{0, 0x33F4, 0x040B},
++	{0, 0x098E, 0xC916},
++	{0, 0x0990, 0x0014},
++	{0, 0x098E, 0xC919},
++	{0, 0x0990, 0x0028},
++	{0, 0x098E, 0xC917},
++	{0, 0x0990, 0x0004},
++	{0, 0x098E, 0xC918},
++	{0, 0x0990, 0x0000},
++	{0, 0x098E, 0xC91A},
++	{0, 0x0990, 0x0001},
++	{0, 0x098E, 0xC91B},
++	{0, 0x0990, 0x0009},
++	{0, 0x326C, 0x0C00},
++	{0, 0x098E, 0x494B},
++	{0, 0x0990, 0x0042},
++	{0, 0x098E, 0x494D},
++	{0, 0x0990, 0x012C},
++	{0, 0x098E, 0xC91E},
++	{0, 0x0990, 0x0012},
++	{0, 0x098E, 0xC91F},
++	{0, 0x0990, 0x000A},
++	{0, 0x098E, 0xC920},
++	{0, 0x0990, 0x0012},
++	{0, 0x098E, 0xC921},
++	{0, 0x0990, 0x000A},
++	{0, 0x098E, 0xC922},
++	{0, 0x0990, 0x0026},
++	{0, 0x098E, 0xC923},
++	{0, 0x0990, 0x001E},
++	{0, 0x098E, 0xC924},
++	{0, 0x0990, 0x0026},
++	{0, 0x098E, 0xC925},
++	{0, 0x0990, 0x0026},
++	{0, 0x098E, 0xBC02},
++	{0, 0x0990, 0x0003},
++	{0, 0x098E, 0xBC05},
++	{0, 0x0990, 0x000E},
++	{0, 0x098E, 0xC950},
++	{0, 0x0990, 0x0064},
++	{0, 0x098E, 0xC94F},
++	{0, 0x0990, 0x0038},
++	{0, 0x098E, 0xC952},
++	{0, 0x0990, 0x0064},
++	{0, 0x098E, 0xC951},
++	{0, 0x0990, 0x0051},
++	{0, 0x098E, 0xC954},
++	{0, 0x0990, 0x0010},
++	{0, 0x098E, 0xC953},
++	{0, 0x0990, 0x0020},
++	{0, 0x098E, 0xC956},
++	{0, 0x0990, 0x0010},
++	{0, 0x098E, 0xC955},
++	{0, 0x0990, 0x0020},
++	{0, 0x098E, 0xC958},
++	{0, 0x0990, 0x0020},
++	{0, 0x098E, 0xC957},
++	{0, 0x0990, 0x0014},
++	{0, 0x098E, 0xC95A},
++	{0, 0x0990, 0x001D},
++	{0, 0x098E, 0xC959},
++	{0, 0x0990, 0x0020},
++	{0, 0x098E, 0xC95C},
++	{0, 0x0990, 0x000C},
++	{0, 0x098E, 0xC95B},
++	{0, 0x0990, 0x0008},
++	{0, 0x098E, 0xC95E},
++	{0, 0x0990, 0x000C},
++	{0, 0x098E, 0xC95D},
++	{0, 0x0990, 0x0008},
++	{0, 0x098E, 0xC95F},
++	{0, 0x0990, 0x0064},
++	{0, 0x098E, 0x48DC},
++	{0, 0x0990, 0x004D},
++	{0, 0x098E, 0x48DE},
++	{0, 0x0990, 0x0096},
++	{0, 0x098E, 0x48E0},
++	{0, 0x0990, 0x001D},
++	{0, 0x098E, 0x48E2},
++	{0, 0x0990, 0x004D},
++	{0, 0x098E, 0x48E4},
++	{0, 0x0990, 0x0096},
++	{0, 0x098E, 0x48E6},
++	{0, 0x0990, 0x001D},
++	{0, 0x098E, 0x48E8},
++	{0, 0x0990, 0x004D},
++	{0, 0x098E, 0x48EA},
++	{0, 0x0990, 0x0096},
++	{0, 0x098E, 0x48EC},
++	{0, 0x0990, 0x001D},
++	{0, 0x098E, 0xDC2A},
++	{0, 0x0990, 0x000B},
++	{0, 0x098E, 0xDC2B},
++	{0, 0x0990, 0x0017},
++	{0, 0x098E, 0xBC0B},
++	{0, 0x0990, 0x0000},
++	{0, 0x098E, 0xBC0C},
++	{0, 0x0990, 0x001B},
++	{0, 0x098E, 0xBC0D},
++	{0, 0x0990, 0x002A},
++	{0, 0x098E, 0xBC0E},
++	{0, 0x0990, 0x003E},
++	{0, 0x098E, 0xBC0F},
++	{0, 0x0990, 0x005A},
++	{0, 0x098E, 0xBC10},
++	{0, 0x0990, 0x0070},
++	{0, 0x098E, 0xBC11},
++	{0, 0x0990, 0x0081},
++	{0, 0x098E, 0xBC12},
++	{0, 0x0990, 0x0090},
++	{0, 0x098E, 0xBC13},
++	{0, 0x0990, 0x009E},
++	{0, 0x098E, 0xBC14},
++	{0, 0x0990, 0x00AB},
++	{0, 0x098E, 0xBC15},
++	{0, 0x0990, 0x00B6},
++	{0, 0x098E, 0xBC16},
++	{0, 0x0990, 0x00C1},
++	{0, 0x098E, 0xBC17},
++	{0, 0x0990, 0x00CB},
++	{0, 0x098E, 0xBC18},
++	{0, 0x0990, 0x00D5},
++	{0, 0x098E, 0xBC19},
++	{0, 0x0990, 0x00DE},
++	{0, 0x098E, 0xBC1A},
++	{0, 0x0990, 0x00E7},
++	{0, 0x098E, 0xBC1B},
++	{0, 0x0990, 0x00EF},
++	{0, 0x098E, 0xBC1C},
++	{0, 0x0990, 0x00F7},
++	{0, 0x098E, 0xBC1D},
++	{0, 0x0990, 0x00FF},
++	{0, 0x098E, 0xBC1E},
++	{0, 0x0990, 0x0000},
++	{0, 0x098E, 0xBC1F},
++	{0, 0x0990, 0x001B},
++	{0, 0x098E, 0xBC20},
++	{0, 0x0990, 0x002A},
++	{0, 0x098E, 0xBC21},
++	{0, 0x0990, 0x003E},
++	{0, 0x098E, 0xBC22},
++	{0, 0x0990, 0x005A},
++	{0, 0x098E, 0xBC23},
++	{0, 0x0990, 0x0070},
++	{0, 0x098E, 0xBC24},
++	{0, 0x0990, 0x0081},
++	{0, 0x098E, 0xBC25},
++	{0, 0x0990, 0x0090},
++	{0, 0x098E, 0xBC26},
++	{0, 0x0990, 0x009E},
++	{0, 0x098E, 0xBC27},
++	{0, 0x0990, 0x00AB},
++	{0, 0x098E, 0xBC28},
++	{0, 0x0990, 0x00B6},
++	{0, 0x098E, 0xBC29},
++	{0, 0x0990, 0x00C1},
++	{0, 0x098E, 0xBC2A},
++	{0, 0x0990, 0x00CB},
++	{0, 0x098E, 0xBC2B},
++	{0, 0x0990, 0x00D5},
++	{0, 0x098E, 0xBC2C},
++	{0, 0x0990, 0x00DE},
++	{0, 0x098E, 0xBC2D},
++	{0, 0x0990, 0x00E7},
++	{0, 0x098E, 0xBC2E},
++	{0, 0x0990, 0x00EF},
++	{0, 0x098E, 0xBC2F},
++	{0, 0x0990, 0x00F7},
++	{0, 0x098E, 0xBC30},
++	{0, 0x0990, 0x00FF},
++	{0, 0x098E, 0xBC31},
++	{0, 0x0990, 0x0000},
++	{0, 0x098E, 0xBC32},
++	{0, 0x0990, 0x000D},
++	{0, 0x098E, 0xBC33},
++	{0, 0x0990, 0x0019},
++	{0, 0x098E, 0xBC34},
++	{0, 0x0990, 0x0030},
++	{0, 0x098E, 0xBC35},
++	{0, 0x0990, 0x0056},
++	{0, 0x098E, 0xBC36},
++	{0, 0x0990, 0x0070},
++	{0, 0x098E, 0xBC37},
++	{0, 0x0990, 0x0081},
++	{0, 0x098E, 0xBC38},
++	{0, 0x0990, 0x0090},
++	{0, 0x098E, 0xBC39},
++	{0, 0x0990, 0x009E},
++	{0, 0x098E, 0xBC3A},
++	{0, 0x0990, 0x00AB},
++	{0, 0x098E, 0xBC3B},
++	{0, 0x0990, 0x00B6},
++	{0, 0x098E, 0xBC3C},
++	{0, 0x0990, 0x00C1},
++	{0, 0x098E, 0xBC3D},
++	{0, 0x0990, 0x00CB},
++	{0, 0x098E, 0xBC3E},
++	{0, 0x0990, 0x00D5},
++	{0, 0x098E, 0xBC3F},
++	{0, 0x0990, 0x00DE},
++	{0, 0x098E, 0xBC40},
++	{0, 0x0990, 0x00E7},
++	{0, 0x098E, 0xBC41},
++	{0, 0x0990, 0x00EF},
++	{0, 0x098E, 0xBC42},
++	{0, 0x0990, 0x00F7},
++	{0, 0x098E, 0xBC43},
++	{0, 0x0990, 0x00FF},
++	{0, 0x098E, 0x6865},
++	{0, 0x0990, 0x00E0},
++	{0, 0x098E, 0x6867},
++	{0, 0x0990, 0x00F4},
++	{0, 0x098E, 0x8400},
++	{0, 0x0990, 0x0006},
++	{0, 0x098E, 0xBC4A},
++	{0, 0x0990, 0x007F},
++	{0, 0x098E, 0xBC4B},
++	{0, 0x0990, 0x007F},
++	{0, 0x098E, 0xBC4C},
++	{0, 0x0990, 0x007F},
++	{0, 0x3542, 0x0010},
++	{0, 0x3544, 0x0030},
++	{0, 0x3546, 0x0040},
++	{0, 0x3548, 0x0080},
++	{0, 0x354A, 0x0100},
++	{0, 0x354C, 0x0200},
++	{0, 0x354E, 0x0300},
++	{0, 0x3550, 0x0010},
++	{0, 0x3552, 0x0030},
++	{0, 0x3554, 0x0040},
++	{0, 0x3556, 0x0080},
++	{0, 0x3558, 0x012C},
++	{0, 0x355A, 0x0320},
++	{0, 0x355C, 0x03E8},
++	{0, 0x3560, 0x0040},
++	{0, 0x3562, 0x0020},
++	{0, 0x3564, 0x0040},
++	{0, 0x3566, 0x0010},
++	{0, 0x3568, 0x0008},
++	{0, 0x356A, 0x0004},
++	{0, 0x356C, 0x0004},
++	{0, 0x356E, 0x0004},
++	{0, 0x098E, 0x3C4D},
++	{0, 0x0990, 0x0DAC},
++	{0, 0x098E, 0x3C4F},
++	{0, 0x0990, 0x148A},
++	{0, 0x098E, 0xC911},
++	{0, 0x0990, 0x00C8},
++	{0, 0x098E, 0xC8F4},
++	{0, 0x0990, 0x0004},
++	{0, 0x098E, 0xC8F5},
++	{0, 0x0990, 0x0002},
++	{0, 0x098E, 0x48F6},
++	{0, 0x0990, 0x3B4D},
++	{0, 0x098E, 0x48F8},
++	{0, 0x0990, 0x6380},
++	{0, 0x098E, 0x48FA},
++	{0, 0x0990, 0x9B18},
++	{0, 0x098E, 0x48FC},
++	{0, 0x0990, 0x5D51},
++	{0, 0x098E, 0x48FE},
++	{0, 0x0990, 0xEDE8},
++	{0, 0x098E, 0x4900},
++	{0, 0x0990, 0xE515},
++	{0, 0x098E, 0x4902},
++	{0, 0x0990, 0xBFF4},
++	{0, 0x098E, 0x4904},
++	{0, 0x0990, 0x001E},
++	{0, 0x098E, 0x4906},
++	{0, 0x0990, 0x0026},
++	{0, 0x098E, 0x4908},
++	{0, 0x0990, 0x0033},
++	{0, 0x098E, 0xE84A},
++	{0, 0x0990, 0x0083},
++	{0, 0x098E, 0xE84D},
++	{0, 0x0990, 0x0083},
++	{0, 0x098E, 0xE84C},
++	{0, 0x0990, 0x0080},
++	{0, 0x098E, 0xE84F},
++	{0, 0x0990, 0x0080},
++	{0, 0x098E, 0x8400},
++	{0, 0x0990, 0x0006},
++	{0, 0x098E, 0x48B0},
++	{0, 0x0990, 0x0180},
++	{0, 0x098E, 0x48B2},
++	{0, 0x0990, 0xFF7A},
++	{0, 0x098E, 0x48B4},
++	{0, 0x0990, 0x0018},
++	{0, 0x098E, 0x48B6},
++	{0, 0x0990, 0xFFCA},
++	{0, 0x098E, 0x48B8},
++	{0, 0x0990, 0x017C},
++	{0, 0x098E, 0x48BA},
++	{0, 0x0990, 0xFFCC},
++	{0, 0x098E, 0x48BC},
++	{0, 0x0990, 0x000C},
++	{0, 0x098E, 0x48BE},
++	{0, 0x0990, 0xFF1F},
++	{0, 0x098E, 0x48C0},
++	{0, 0x0990, 0x01E8},
++	{0, 0x098E, 0x48C2},
++	{0, 0x0990, 0x0020},
++	{0, 0x098E, 0x48C4},
++	{0, 0x0990, 0x0044},
++	{0, 0x098E, 0x48C6},
++	{0, 0x0990, 0x0079},
++	{0, 0x098E, 0x48C8},
++	{0, 0x0990, 0xFFAD},
++	{0, 0x098E, 0x48CA},
++	{0, 0x0990, 0xFFE2},
++	{0, 0x098E, 0x48CC},
++	{0, 0x0990, 0x0033},
++	{0, 0x098E, 0x48CE},
++	{0, 0x0990, 0x002A},
++	{0, 0x098E, 0x48D0},
++	{0, 0x0990, 0xFFAA},
++	{0, 0x098E, 0x48D2},
++	{0, 0x0990, 0x0017},
++	{0, 0x098E, 0x48D4},
++	{0, 0x0990, 0x004B},
++	{0, 0x098E, 0x48D6},
++	{0, 0x0990, 0xFFA5},
++	{0, 0x098E, 0x48D8},
++	{0, 0x0990, 0x0015},
++	{0, 0x098E, 0x48DA},
++	{0, 0x0990, 0xFFE2},
++	{0, 0x35A2, 0x0014},
++	{0, 0x098E, 0xC949},
++	{0, 0x0990, 0x0024},
++	{0, 0x35A4, 0x0596},
++	{0, 0x098E, 0xC94A},
++	{0, 0x0990, 0x0062},
++	{0, 0x098E, 0xC948},
++	{0, 0x0990, 0x0006},
++	{0, 0x098E, 0xC914},
++	{0, 0x0990, 0x0000},
++	{0, 0x098E, 0xC915},
++	{0, 0x0990, 0x00FF},
++	{0, 0x098E, 0xE86F},
++	{0, 0x0990, 0x0060},
++	{0, 0x098E, 0xE870},
++	{0, 0x0990, 0x003C},
++	{0, 0x098E, 0xEC6F},
++	{0, 0x0990, 0x0060},
++	{0, 0x098E, 0xEC70},
++	{0, 0x0990, 0x003C},
++	{0, 0x098E, 0xE883},
++	{0, 0x0990, 0x0000},
++	{0, 0x098E, 0xEC83},
++	{0, 0x0990, 0x0000},
++	{0, 0x098E, 0x8400},
++	{0, 0x0990, 0x0006},
++	{0, 0x098E, 0xE885},
++	{0, 0x0990, 0x001E},
++	{0, 0x098E, 0xE886},
++	{0, 0x0990, 0x00D8},
++	{0, 0x098E, 0xEC85},
++	{0, 0x0990, 0x001E},
++	{0, 0x098E, 0xEC86},
++	{0, 0x0990, 0x00D8},
++	{0, 0x098E, 0xE884},
++	{0, 0x0990, 0x005C},
++	{0, 0x098E, 0xEC84},
++	{0, 0x0990, 0x005C},
++	{0, 0x098E, 0x490A},
++	{0, 0x0990, 0x0666},
++	{0, 0x098E, 0x490C},
++	{0, 0x0990, 0x0140},
++	{0, 0x098E, 0x6857},
++	{0, 0x0990, 0x0014},
++	{0, 0x098E, 0x685C},
++	{0, 0x0990, 0x0005},
++	{0, 0x098E, 0x490E},
++	{0, 0x0990, 0x00A4},
++	{0, 0x098E, 0xB43D},
++	{0, 0x0990, 0x0031},
++	{0, 0x098E, 0xB43E},
++	{0, 0x0990, 0x001B},
++	{0, 0x098E, 0xB43F},
++	{0, 0x0990, 0x0028},
++	{0, 0x098E, 0xB440},
++	{0, 0x0990, 0x0003},
++	{0, 0x098E, 0xB441},
++	{0, 0x0990, 0x00CD},
++	{0, 0x098E, 0xB442},
++	{0, 0x0990, 0x0064},
++	{0, 0x098E, 0xB443},
++	{0, 0x0990, 0x000F},
++	{0, 0x098E, 0xB444},
++	{0, 0x0990, 0x0007},
++	{0, 0x098E, 0x300D},
++	{0, 0x0990, 0x000F},
++	{0, 0x098E, 0x3017},
++	{0, 0x0990, 0x0F0F},
++	{0, 0x098E, 0x8400},
++	{0, 0x0990, 0x0006},
++	{0, 0x098E, 0xE81F},
++	{0, 0x0990, 0x0020},
++	{0, 0x098E, 0x68A0},
++	{0, 0x0990, 0x082E},
++	{0, 0x098E, 0x6CA0},
++	{0, 0x0990, 0x082E},
++	{0, 0x098E, 0x70A0},
++	{0, 0x0990, 0x082E},
++	{0, 0x098E, 0x74A0},
++	{0, 0x0990, 0x082E},
++	{0, 0x3C52, 0x082E},
++	{0, 0x098E, 0x488E},
++	{0, 0x0990, 0x0020},
++	{0, 0x098E, 0xECAC},
++	{0, 0x0990, 0x0000}
++};
++
++mt9t111_regs def_regs2[] = {
++	{100, 0x0018, 0x0028},
++	{0, 0x316C, 0x350F},
++	{0, 0x098E, 0x6817},
++	{0, 0x0990, 0x000C},
++	{0, 0x0034, 0x0000}
++};
++
++mt9t111_regs pll_regs1[] = {
++	{0, 0x0014, 0x2425},
++	{0, 0x0014, 0x2425},
++	{0, 0x0014, 0x2145},
++	{0, 0x0010, 0x0219},
++	{0, 0x0012, 0x0090},
++	{0, 0x002A, 0x79DD},
++	{0, 0x0014, 0x2545},
++	{0, 0x0014, 0x2547},
++	{0, 0x0014, 0x3447},
++	{0, 0x0014, 0x3047}
++};
++
++mt9t111_regs pll_regs2[] = {
++	{0, 0x0014, 0x3046},
++	{0, 0x0022, 0x01E0},
++	{0, 0x001E, 0x0707},
++	{0, 0x3B84, 0x011D}	
++};
++
++mt9t111_regs bayer_pattern_regs[] = {
++	{0, 0x098E, 0x6807},
++	{0, 0x0990, 0x0100},
++	{0, 0x098E, 0x6809},
++	{0, 0x0990, 0x0000},
++	{0, 0x098E, 0xE88E},
++	{0, 0x0990, 0x0000},
++	{0, 0x098E, 0x6C07},
++	{0, 0x0990, 0x0100},
++	{0, 0x098E, 0x6C09},
++	{0, 0x0990, 0x0000},
++	{0, 0x098E, 0xEC8E},
++	{0, 0x0990, 0x0000}
++};
++
++#endif
+diff --git a/include/media/mt9t111.h b/include/media/mt9t111.h
+new file mode 100644
+index 0000000..7acbeed
+--- /dev/null
++++ b/include/media/mt9t111.h
+@@ -0,0 +1,79 @@
++/*
++ * include/media/mt9t111.h
++ *
++ * mt9t111 sensor driver
++ *
++ * Copyright (C) 2009 Leopard Imaging
++ *
++ * This file is licensed under the terms of the GNU General Public License
++ * version 2. This program is licensed "as is" without any warranty of any
++ * kind, whether express or implied.
++ */
++
++#ifndef	MT9T111_H
++#define	MT9T111_H
++
++/*********************************
++ * Defines and Macros and globals
++ ********************************/
++
++#ifdef	TRUE
++#undef	TRUE
++#endif
++
++#ifdef	FALSE
++#undef	FALSE
++#endif
++
++#define	TRUE 	1
++#define	FALSE	0
++
++#ifdef DEBUG
++#undef DEBUG
++#endif
++
++#ifndef TYPES
++#define TYPES
++#endif
++
++#define MT9T111_I2C_REGISTERED			(1)
++#define MT9T111_I2C_UNREGISTERED		(0)
++
++/*i2c adress for MT9T111*/
++#define MT9T111_I2C_ADDR  		(0x78 >>1)
++
++#define MT9T111_CLK_MAX 	(75000000) /* 75MHz */
++#define MT9T111_CLK_MIN	(6000000)  /* 6Mhz */
++
++#define MT9T111_I2C_CONFIG		(1)
++#define I2C_ONE_BYTE_TRANSFER		(1)
++#define I2C_TWO_BYTE_TRANSFER		(2)
++#define I2C_THREE_BYTE_TRANSFER		(3)
++#define I2C_FOUR_BYTE_TRANSFER		(4)
++#define I2C_TXRX_DATA_MASK		(0x00FF)
++#define I2C_TXRX_DATA_MASK_UPPER	(0xFF00)
++#define I2C_TXRX_DATA_SHIFT		(8)
++
++struct mt9t111_platform_data {
++	char *master;
++	int (*power_set) (enum v4l2_power on);
++	int (*ifparm) (struct v4l2_ifparm *p);
++	int (*priv_data_set) (void *);
++	/* Interface control params */
++	bool clk_polarity;
++	bool hs_polarity;
++	bool vs_polarity;
++};
++
++/**
++ * struct capture_size - image capture size information
++ * @width: image width in pixels
++ * @height: image height in pixels
++ */
++struct capture_size {
++	unsigned long width;
++	unsigned long height;
++};
++
++#endif				/*for  ifndef MT9T111 */
++
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0002-mt9t111-Fix-all-checkpatch-errors.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0002-mt9t111-Fix-all-checkpatch-errors.patch
new file mode 100644
index 0000000..a44bd48
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0002-mt9t111-Fix-all-checkpatch-errors.patch
@@ -0,0 +1,398 @@
+From 29157ffef7f3813c1ec23f9d11eb485242d53454 Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Fri, 11 Jun 2010 13:51:49 -0500
+Subject: [PATCH 02/75] mt9t111: Fix all checkpatch errors
+
+The code was plagued with checkpatch errors. Fix them!
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ drivers/media/video/mt9t111.c     |  153 ++++++++++++++++++++-----------------
+ drivers/media/video/mt9t111_reg.h |    6 +-
+ include/media/mt9t111.h           |    2 +-
+ 3 files changed, 87 insertions(+), 74 deletions(-)
+
+diff --git a/drivers/media/video/mt9t111.c b/drivers/media/video/mt9t111.c
+index ecc5115..95e1508 100644
+--- a/drivers/media/video/mt9t111.c
++++ b/drivers/media/video/mt9t111.c
+@@ -17,20 +17,21 @@
+ #include <media/mt9t111.h>
+ #include "mt9t111_reg.h"
+ 
+-#define USE_RAW // YCbCr mode does not work yet
+-//#define COLOR_BAR // Create a Color bar test pattern, Blue, Green, Red, Grey
++/* YCbCr mode does not work yet */
++#define USE_RAW
++/* Create a Color bar test pattern, Blue, Green, Red, Grey */
++/* #define COLOR_BAR */
+ 
+ #define SENSOR_DETECTED		1
+ #define SENSOR_NOT_DETECTED	0
+ 
+ static void mt9t111_loaddefault(struct i2c_client *client);
+ 
+-/* 
+-* as a place holder for further development
+-*/
++/*
++ * as a place holder for further development
++ */
+ static void debug_dummy(char *in_msg)
+ {
+-	
+ }
+ 
+ /* list of image formats supported by mt9t111 sensor */
+@@ -55,8 +56,8 @@ const static struct v4l2_fmtdesc mt9t111_formats[] = {
+  * smallest image size to largest.
+  */
+ const static struct capture_size mt9t111_sizes[] = {
+-	{  640, 480 },	
+-//	{ 2048, 1536}		
++	{  640, 480 },
++	/* { 2048, 1536} */
+ };
+ 
+ #define NUM_CAPTURE_SIZE ARRAY_SIZE(mt9t111_sizes)
+@@ -120,17 +121,17 @@ mt9t111_read_reg(struct i2c_client *client, u16 reg, u16 *val)
+ 	msg->addr = client->addr;
+ 	msg->flags = 0;
+ 	msg->len = 2;
+-	msg->buf = data;	
++	msg->buf = data;
+ 	data[0] = (reg & 0xff00) >> 8;
+ 	data[1] = (reg & 0x00ff);
+ 	err = i2c_transfer(client->adapter, msg, 1);
+-	if (err >= 0) {			
+-		msg->flags = I2C_M_RD;			
+-		msg->len = 2;	/* 2 byte read */			
+-		err = i2c_transfer(client->adapter, msg, 1);			
+-		if (err >= 0) {				
+-			*val = ((data[0] & 0x00ff) << 8)    
+-				| (data[1] & 0x00ff);	
++	if (err >= 0) {
++		msg->flags = I2C_M_RD;
++		msg->len = 2;	/* 2 byte read */
++		err = i2c_transfer(client->adapter, msg, 1);
++		if (err >= 0) {
++			*val = ((data[0] & 0x00ff) << 8)
++				| (data[1] & 0x00ff);
+ 			return 0;
+ 		}
+ 	}
+@@ -159,7 +160,7 @@ mt9t111_write_reg(struct i2c_client *client, u16 reg, u16 val)
+ 	msg->len = 4;
+ 	msg->buf = data;
+ 	data[0] = (u8)((reg & 0xff00) >> 8);
+-	data[1] = (u8)(reg & 0x00ff);	
++	data[1] = (u8)(reg & 0x00ff);
+ 	data[2] = (u8)((val & 0xff00) >> 8);
+ 	data[3] = (u8)(val & 0x00ff);
+ 	err = i2c_transfer(client->adapter, msg, 1);
+@@ -171,7 +172,7 @@ mt9t111_write_reg(struct i2c_client *client, u16 reg, u16 val)
+  * mt9t111_write_regs - Write registers to an mt9t111 sensor device
+  * @client: i2c driver client structure
+  * @reg_in: pointer to registers to write
+- * @cnt: the number of registers 
++ * @cnt: the number of registers
+  *
+  * Write registers .
+  * Returns zero if successful, or non-zero otherwise.
+@@ -182,19 +183,21 @@ mt9t111_write_regs(struct i2c_client *client, mt9t111_regs *reg_in, int cnt)
+ 	int err = 0;
+ 	int i;
+ 	mt9t111_regs *reg = reg_in;
+-	
+-	for (i=0;i<cnt;i++) {
++
++	for (i = 0; i < cnt; i++) {
+ 		if (reg->delay_time == 0) {
+ 			err |= mt9t111_write_reg(client, reg->addr, reg->data);
+ 		} else if (reg->addr != 0 || reg->data != 0) {
+ 			err |= mt9t111_write_reg(client, reg->addr, reg->data);
+ 			mdelay(reg->delay_time);
+-		} else 
++		} else {
+ 			mdelay(reg->delay_time);
+-			
++		}
++
+ 		if (err < 0) {
+-			dev_warn(&client->dev, "write reg error, addr = 0x%x, data = 0x%x \n", \
+-				reg->addr, reg->data);
++			dev_warn(&client->dev, "write reg error, addr = 0x%x,"
++						" data = 0x%x \n",
++						reg->addr, reg->data);
+ 			return err;
+ 		}
+ 		reg++;
+@@ -219,10 +222,11 @@ mt9t111_detect(struct i2c_client *client)
+ 	if (mt9t111_read_reg(client, MT9T111_CHIP_ID, &val) < 0)
+ 		return -ENODEV;
+ 	dev_info(&client->dev, "model id detected 0x%x\n", val);
+-	
++
+ 	if (val != MT9T111_CHIP_ID_VALUE) {
+-		dev_warn(&client->dev, "model id mismatch received 0x%x expecting 0x%x\n",
+-			val, MT9T111_CHIP_ID_VALUE);
++		dev_warn(&client->dev, "model id mismatch received 0x%x"
++				       " expecting 0x%x\n",
++				       val, MT9T111_CHIP_ID_VALUE);
+ 
+ 		return -ENODEV;
+ 	}
+@@ -285,14 +289,17 @@ static int ioctl_enum_frameintervals(struct v4l2_int_device *s,
+ {
+ 	int ifmt;
+ 
+-printk(KERN_INFO "entering ioctl_enum_frameintervals\n");
+-printk(KERN_INFO "index = %d, pixel_format = 0x%x, width = %d, height = %d\n",
+-			frmi->index, frmi->pixel_format, frmi->width, frmi->height);
+-printk(KERN_INFO "mt9t111 format = 0x%x\n",	mt9t111_formats[0].pixelformat);
++	printk(KERN_INFO "entering ioctl_enum_frameintervals\n");
++	printk(KERN_INFO "index = %d, pixel_format = 0x%x,"
++			 " width = %d, height = %d\n",
++			 frmi->index, frmi->pixel_format,
++			 frmi->width, frmi->height);
++	printk(KERN_INFO "mt9t111 format = 0x%x\n",
++			 mt9t111_formats[0].pixelformat);
+ 
+ 	if (frmi->index >= NUM_CAPTURE_FRAMEINTERVALS)
+ 		return -EINVAL;
+-	
++
+ 	for (ifmt = 0; ifmt < NUM_CAPTURE_FORMATS; ifmt++) {
+ 		if (frmi->pixel_format == mt9t111_formats[ifmt].pixelformat)
+ 			break;
+@@ -368,7 +375,7 @@ static int ioctl_s_power(struct v4l2_int_device *s, enum v4l2_power on)
+ 	if (rval < 0) {
+ 		dev_err(&c->dev, "Unable to set the power state: " "mt9t111"
+ 								" sensor\n");
+-		//sensor->pdata->set_xclk(0);
++		/* sensor->pdata->set_xclk(0); */
+ 		return rval;
+ 	}
+ 
+@@ -418,7 +425,7 @@ static int ioctl_g_priv(struct v4l2_int_device *s, void *p)
+ static int ioctl_s_parm(struct v4l2_int_device *s,
+ 			     struct v4l2_streamparm *a)
+ {
+-	//TODO: set paramters
++	/* TODO: set paramters */
+ 	debug_dummy("debug_dummy -- VIDIOC_S_PARM ");
+ 	return 0;
+ }
+@@ -483,13 +490,13 @@ static int ioctl_try_fmt_cap(struct v4l2_int_device *s,
+ 
+ 	pix->width = 640;
+ 	pix->height = 480;
+-#ifdef USE_RAW	
++#ifdef USE_RAW
+ 	pix->pixelformat = V4L2_PIX_FMT_SGRBG10;
+-	pix->bytesperline = pix->width; 
++	pix->bytesperline = pix->width;
+ 	pix->colorspace =  V4L2_COLORSPACE_SRGB;
+ #else
+ 	pix->pixelformat = V4L2_PIX_FMT_YUYV;
+-	pix->bytesperline = pix->width * 2;  
++	pix->bytesperline = pix->width * 2;
+ 	pix->colorspace = V4L2_COLORSPACE_JPEG;
+ #endif
+ 	pix->field = V4L2_FIELD_NONE;
+@@ -585,7 +592,7 @@ static int ioctl_s_ctrl(struct v4l2_int_device *s,
+ static int ioctl_g_ctrl(struct v4l2_int_device *s,
+ 			     struct v4l2_control *vc)
+ {
+-	debug_dummy("debug_dummy -- g ctrl\n");	
++	debug_dummy("debug_dummy -- g ctrl\n");
+ 	return 0;
+ }
+ 
+@@ -601,8 +608,8 @@ static int ioctl_g_ctrl(struct v4l2_int_device *s,
+ static int ioctl_queryctrl(struct v4l2_int_device *s,
+ 				struct v4l2_queryctrl *qc)
+ {
+-	debug_dummy("debug_dummy -- query ctrl\n");	
+-	return-EINVAL;
++	debug_dummy("debug_dummy -- query ctrl\n");
++	return -EINVAL;
+ }
+ 
+ /**
+@@ -647,12 +654,11 @@ static int ioctl_g_ifparm(struct v4l2_int_device *s, struct v4l2_ifparm *p)
+ 		return rval;
+ 	}
+ 
+-	p->u.ycbcr.clock_curr = 40*1000000; // temporal value
++	p->u.ycbcr.clock_curr = 40 * 1000000; /* temporal value */
+ 
+ 	return 0;
+ }
+ 
+-
+ static struct v4l2_int_ioctl_desc mt9t111_ioctl_desc[] = {
+ 	{ .num = vidioc_int_enum_framesizes_num,
+ 	  .func = (v4l2_int_ioctl_func *)ioctl_enum_framesizes },
+@@ -666,8 +672,8 @@ static struct v4l2_int_ioctl_desc mt9t111_ioctl_desc[] = {
+ 	  .func = (v4l2_int_ioctl_func *)ioctl_s_power },
+ 	{ .num = vidioc_int_g_priv_num,
+ 	  .func = (v4l2_int_ioctl_func *)ioctl_g_priv },
+-  	{vidioc_int_g_ifparm_num, 
+-  	  .func = (v4l2_int_ioctl_func*) ioctl_g_ifparm},
++	{ .num = vidioc_int_g_ifparm_num,
++	  .func = (v4l2_int_ioctl_func *)ioctl_g_ifparm },
+ 	{ .num = vidioc_int_init_num,
+ 	  .func = (v4l2_int_ioctl_func *)ioctl_init },
+ 	{ .num = vidioc_int_enum_fmt_cap_num,
+@@ -688,29 +694,30 @@ static struct v4l2_int_ioctl_desc mt9t111_ioctl_desc[] = {
+ 	  .func = (v4l2_int_ioctl_func *)ioctl_g_ctrl },
+ 	{ .num = vidioc_int_s_ctrl_num,
+ 	  .func = (v4l2_int_ioctl_func *)ioctl_s_ctrl },
+-	{.num = vidioc_int_s_video_routing_num,
+-		.func = (v4l2_int_ioctl_func *) ioctl_s_routing},	  
++	{ .num = vidioc_int_s_video_routing_num,
++	  .func = (v4l2_int_ioctl_func *)ioctl_s_routing },
+ };
+ 
+-static void mt9t111_refresh(struct i2c_client *client){	
+-	int i;	
+-	unsigned short value;		
+-	// MCU_ADDRESS [SEQ_CMD] -- refresh	
+-	mt9t111_write_reg(client, 0x098E,	    0x8400);	
+-	mt9t111_write_reg(client, 0x0990,	    0x0006);	
+-	for (i=0;i<100;i++){		
+-		mt9t111_write_reg(client, 0x098E, 0x8400);			
+-		mt9t111_read_reg(client,0x0990,&value);				
+-		if ( value == 0)			
+-			break;		
+-		mdelay(5);	
++static void mt9t111_refresh(struct i2c_client *client)
++{
++	int i;
++	unsigned short value;
++	/* MCU_ADDRESS [SEQ_CMD] -- refresh */
++	mt9t111_write_reg(client, 0x098E, 0x8400);
++	mt9t111_write_reg(client, 0x0990, 0x0006);
++	for (i = 0; i < 100; i++) {
++		mt9t111_write_reg(client, 0x098E, 0x8400);
++		mt9t111_read_reg(client, 0x0990, &value);
++		if (value == 0)
++			break;
++		mdelay(5);
+ 	}
+ }
+ 
+ #ifdef COLOR_BAR
+ static void mt9t111_color_bar(struct i2c_client *client)
+ {
+-	mt9t111_write_reg(client, 0x3210, 0x01B0); // disable lens correction
++	mt9t111_write_reg(client, 0x3210, 0x01B0); /* disable lens correction */
+ 
+ 	mt9t111_write_reg(client, 0x098E, 0x6003);
+ 	mt9t111_write_reg(client, 0x0990, 0x0100);
+@@ -721,22 +728,25 @@ static void mt9t111_color_bar(struct i2c_client *client)
+ 
+ static void mt9t111_bayer_format(struct i2c_client *client)
+ {
+-	mt9t111_write_regs(client, bayer_pattern_regs, sizeof(bayer_pattern_regs)/sizeof(mt9t111_regs));
++	mt9t111_write_regs(client, bayer_pattern_regs,
++			   sizeof(bayer_pattern_regs) / sizeof(mt9t111_regs));
+ }
+ 
+ static void mt9t111_enable_pll(struct i2c_client *client)
+ {
+ 	int i;
+-	unsigned short value; 
++	unsigned short value;
+ 
+-	mt9t111_write_regs(client, pll_regs1, sizeof(pll_regs1)/sizeof(mt9t111_regs));
+-	for (i=0;i<100;i++){
+-		mt9t111_read_reg(client,0x0014,&value);
+-		if (( value & 0x8000) != 0)
++	mt9t111_write_regs(client, pll_regs1,
++			   sizeof(pll_regs1) / sizeof(mt9t111_regs));
++	for (i = 0; i < 100; i++) {
++		mt9t111_read_reg(client, 0x0014, &value);
++		if ((value & 0x8000) != 0)
+ 			break;
+ 		mdelay(2);
+ 	}
+-	mt9t111_write_regs(client, pll_regs2, sizeof(pll_regs2)/sizeof(mt9t111_regs));
++	mt9t111_write_regs(client, pll_regs2,
++			   sizeof(pll_regs2) / sizeof(mt9t111_regs));
+ }
+ 
+ 
+@@ -746,9 +756,12 @@ static void mt9t111_loaddefault(struct i2c_client *client)
+ 	mt9t111_write_reg(client, 0x001A, 0x0218);
+ 
+ 	mt9t111_enable_pll(client);
+-	mt9t111_write_regs(client, def_regs1, sizeof(def_regs1)/sizeof(mt9t111_regs));
+-	mt9t111_write_regs(client, patch_rev6, sizeof(patch_rev6)/sizeof(mt9t111_regs));
+-	mt9t111_write_regs(client, def_regs2, sizeof(def_regs2)/sizeof(mt9t111_regs));
++	mt9t111_write_regs(client, def_regs1,
++			   sizeof(def_regs1) / sizeof(mt9t111_regs));
++	mt9t111_write_regs(client, patch_rev6,
++			   sizeof(patch_rev6) / sizeof(mt9t111_regs));
++	mt9t111_write_regs(client, def_regs2,
++			   sizeof(def_regs2) / sizeof(mt9t111_regs));
+ 
+ #ifdef USE_RAW
+ 	mt9t111_bayer_format(client);
+@@ -806,7 +819,7 @@ mt9t111_probe(struct i2c_client *client, const struct i2c_device_id *id)
+ 
+ 	sensor->pix.width = 640;
+ 	sensor->pix.height = 480;
+-#ifdef USE_RAW	
++#ifdef USE_RAW
+ 	sensor->pix.pixelformat = V4L2_PIX_FMT_SGRBG10;
+ #else
+ 	sensor->pix.pixelformat = V4L2_PIX_FMT_YUYV;
+diff --git a/drivers/media/video/mt9t111_reg.h b/drivers/media/video/mt9t111_reg.h
+index e012eeb..e226c37 100644
+--- a/drivers/media/video/mt9t111_reg.h
++++ b/drivers/media/video/mt9t111_reg.h
+@@ -25,7 +25,7 @@ typedef struct {
+ 	u16 data;
+ } mt9t111_regs;
+ 
+-mt9t111_regs patch_rev6[] ={
++mt9t111_regs patch_rev6[] = {
+ 	{0, 0x0982, 0x0},
+ 	{0, 0x098A, 0xCE7},
+ 	{0, 0x0990, 0x3C3C},
+@@ -658,7 +658,7 @@ mt9t111_regs patch_rev6[] ={
+ 	{100, 0x0990, 0x0004}
+ };
+ 
+-mt9t111_regs def_regs1[] ={
++mt9t111_regs def_regs1[] = {
+ 	{0, 0x001A, 0x0218},
+ 	{0, 0x001E, 0x0777},
+ 	{0, 0x3084, 0x2409},
+@@ -1343,7 +1343,7 @@ mt9t111_regs pll_regs2[] = {
+ 	{0, 0x0014, 0x3046},
+ 	{0, 0x0022, 0x01E0},
+ 	{0, 0x001E, 0x0707},
+-	{0, 0x3B84, 0x011D}	
++	{0, 0x3B84, 0x011D}
+ };
+ 
+ mt9t111_regs bayer_pattern_regs[] = {
+diff --git a/include/media/mt9t111.h b/include/media/mt9t111.h
+index 7acbeed..0a5161a 100644
+--- a/include/media/mt9t111.h
++++ b/include/media/mt9t111.h
+@@ -40,7 +40,7 @@
+ #define MT9T111_I2C_UNREGISTERED		(0)
+ 
+ /*i2c adress for MT9T111*/
+-#define MT9T111_I2C_ADDR  		(0x78 >>1)
++#define MT9T111_I2C_ADDR  		(0x78 >> 1)
+ 
+ #define MT9T111_CLK_MAX 	(75000000) /* 75MHz */
+ #define MT9T111_CLK_MIN	(6000000)  /* 6Mhz */
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0003-mt9t111-Pass-v4l2_int_device-data.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0003-mt9t111-Pass-v4l2_int_device-data.patch
new file mode 100644
index 0000000..a54aeb7
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0003-mt9t111-Pass-v4l2_int_device-data.patch
@@ -0,0 +1,40 @@
+From e6af1e25ce53f1011fe6a1920cc9877ae51d2e95 Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Fri, 11 Jun 2010 16:17:56 -0500
+Subject: [PATCH 03/75] mt9t111: Pass v4l2_int_device data
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ drivers/media/video/mt9t111.c |    2 +-
+ include/media/mt9t111.h       |    2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/media/video/mt9t111.c b/drivers/media/video/mt9t111.c
+index 95e1508..6a7b2c0 100644
+--- a/drivers/media/video/mt9t111.c
++++ b/drivers/media/video/mt9t111.c
+@@ -371,7 +371,7 @@ static int ioctl_s_power(struct v4l2_int_device *s, enum v4l2_power on)
+ 	else
+ 		debug_dummy("debug_dummy -- enable clock\n");;
+ 
+-	rval = sensor->pdata->power_set(on);
++	rval = sensor->pdata->power_set(s, on);
+ 	if (rval < 0) {
+ 		dev_err(&c->dev, "Unable to set the power state: " "mt9t111"
+ 								" sensor\n");
+diff --git a/include/media/mt9t111.h b/include/media/mt9t111.h
+index 0a5161a..aae3f99 100644
+--- a/include/media/mt9t111.h
++++ b/include/media/mt9t111.h
+@@ -56,7 +56,7 @@
+ 
+ struct mt9t111_platform_data {
+ 	char *master;
+-	int (*power_set) (enum v4l2_power on);
++	int (*power_set) (struct v4l2_int_device *s, enum v4l2_power on);
+ 	int (*ifparm) (struct v4l2_ifparm *p);
+ 	int (*priv_data_set) (void *);
+ 	/* Interface control params */
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0004-omap3beagle-Add-camera-support.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0004-omap3beagle-Add-camera-support.patch
new file mode 100644
index 0000000..1f28b22
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0004-omap3beagle-Add-camera-support.patch
@@ -0,0 +1,352 @@
+From e91589e4c2736495be6f1252599d5115b33ac8c8 Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Fri, 11 Jun 2010 16:15:58 -0500
+Subject: [PATCH 04/75] omap3beagle: Add camera support
+
+This is tested with the xM + Leopard imaging module camera, which
+has a MT9T111.
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ arch/arm/mach-omap2/Makefile                   |    3 +-
+ arch/arm/mach-omap2/board-omap3beagle-camera.c |  228 ++++++++++++++++++++++++
+ arch/arm/mach-omap2/board-omap3beagle-camera.h |   41 +++++
+ arch/arm/mach-omap2/board-omap3beagle.c        |   25 +++
+ 4 files changed, 296 insertions(+), 1 deletions(-)
+ create mode 100644 arch/arm/mach-omap2/board-omap3beagle-camera.c
+ create mode 100644 arch/arm/mach-omap2/board-omap3beagle-camera.h
+
+diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
+index fa01859..4d9dcdd 100644
+--- a/arch/arm/mach-omap2/Makefile
++++ b/arch/arm/mach-omap2/Makefile
+@@ -87,7 +87,8 @@ obj-$(CONFIG_MACH_OMAP_2430SDP)		+= board-2430sdp.o \
+ 					   mmc-twl4030.o
+ obj-$(CONFIG_MACH_OMAP_APOLLON)		+= board-apollon.o
+ obj-$(CONFIG_MACH_OMAP3_BEAGLE)		+= board-omap3beagle.o \
+-					   mmc-twl4030.o
++					   mmc-twl4030.o \
++					   board-omap3beagle-camera.o
+ obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o \
+ 					   mmc-twl4030.o \
+ 					   board-ldp-camera.o
+diff --git a/arch/arm/mach-omap2/board-omap3beagle-camera.c b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+new file mode 100644
+index 0000000..e93437f
+--- /dev/null
++++ b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+@@ -0,0 +1,228 @@
++/*
++ * Driver for Leopard Module Board used in Beagleboard (xM)
++ *
++ * Copyright (C) 2010 Texas Instruments Inc
++ * Author: Sergio Aguirre <saaguirre@ti.com>
++ *
++ * Based on work done by:
++ *     Vaibhav Hiremath <hvaibhav@ti.com>
++ *     Anuj Aggarwal <anuj.aggarwal@ti.com>
++ *     Sivaraj R <sivaraj@ti.com>
++ *
++ * This package is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++
++#include <linux/init.h>
++#include <linux/i2c.h>
++#include <linux/gpio.h>
++#include <linux/mm.h>
++#include <linux/videodev2.h>
++#include <linux/i2c/twl.h>
++#include <linux/delay.h>
++
++#include <plat/mux.h>
++#include <plat/board.h>
++
++#include <media/v4l2-int-device.h>
++#include <media/mt9t111.h>
++
++/* Include V4L2 ISP-Camera driver related header file */
++#include <../drivers/media/video/omap34xxcam.h>
++#include <../drivers/media/video/isp/ispreg.h>
++
++#include "mux.h"
++#include "board-omap3beagle-camera.h"
++
++#define MODULE_NAME			"omap3beaglelmb"
++
++#define MT9T111_I2C_BUSNUM	(2)
++
++#define CAM_USE_XCLKA       1
++
++#if defined(CONFIG_VIDEO_MT9T111) || defined(CONFIG_VIDEO_MT9T111_MODULE)
++static struct isp_interface_config mt9t111_if_config = {
++	.ccdc_par_ser		= ISP_PARLL, 
++	.dataline_shift		= 0x0,
++	.hsvs_syncdetect	= ISPCTRL_SYNC_DETECT_VSRISE,
++	.strobe			= 0x0,
++	.prestrobe		= 0x0,
++	.shutter		= 0x0,
++	.u.par.par_bridge	= 0x1,
++	.u.par.par_clk_pol	= 0x0,
++};
++
++static struct v4l2_ifparm mt9t111_ifparm_s = {
++#if 1
++	.if_type = V4L2_IF_TYPE_RAW, 
++	.u 	 = {
++		.raw = {  
++			.frame_start_on_rising_vs = 1,
++			.bt_sync_correct	= 0,
++			.swap			= 0,
++			.latch_clk_inv		= 0,
++			.nobt_hs_inv		= 0,	/* active high */
++			.nobt_vs_inv		= 0,	/* active high */
++			.clock_min		= MT9T111_CLK_MIN,
++			.clock_max		= MT9T111_CLK_MAX,
++		},
++	},
++#else		
++	.if_type = V4L2_IF_TYPE_YCbCr, 
++	.u 	 = {
++		.ycbcr = {  
++			.frame_start_on_rising_vs = 1,
++			.bt_sync_correct	= 0,
++			.swap			= 0,
++			.latch_clk_inv		= 0,
++			.nobt_hs_inv		= 0,	/* active high */
++			.nobt_vs_inv		= 0,	/* active high */
++			.clock_min		= MT9T111_CLK_MIN,
++			.clock_max		= MT9T111_CLK_MAX,
++		},
++	},
++#endif
++};
++
++/**
++ * @brief mt9t111_ifparm - Returns the mt9t111 interface parameters
++ *
++ * @param p - pointer to v4l2_ifparm structure
++ *
++ * @return result of operation - 0 is success
++ */
++static int mt9t111_ifparm(struct v4l2_ifparm *p)
++{
++	if (p == NULL)
++		return -EINVAL;
++
++	*p = mt9t111_ifparm_s;
++	return 0;
++}
++
++#if defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE)
++static struct omap34xxcam_hw_config mt9t111_hwc = {
++	.dev_index		= 0,
++	.dev_minor		= 0,
++	.dev_type		= OMAP34XXCAM_SLAVE_SENSOR,
++	.u.sensor.sensor_isp	= 1,
++};
++#endif
++
++/**
++ * @brief mt9t111_set_prv_data - Returns mt9t111 omap34xx driver private data
++ *
++ * @param priv - pointer to omap34xxcam_hw_config structure
++ *
++ * @return result of operation - 0 is success
++ */
++static int mt9t111_set_prv_data(void *priv)
++{
++#if defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE)
++	struct omap34xxcam_hw_config *hwc = priv;
++
++	if (priv == NULL)
++		return -EINVAL;
++
++	hwc->u.sensor = mt9t111_hwc.u.sensor;
++	hwc->dev_index = mt9t111_hwc.dev_index;
++	hwc->dev_minor = mt9t111_hwc.dev_minor;
++	hwc->dev_type = mt9t111_hwc.dev_type;
++	return 0;
++#else
++	return -EINVAL;
++#endif
++}
++
++/**
++ * @brief mt9t111_power_set - Power-on or power-off TVP5146 device
++ *
++ * @param power - enum, Power on/off, resume/standby
++ *
++ * @return result of operation - 0 is success
++ */
++static int mt9t111_power_set(struct v4l2_int_device *s, enum v4l2_power power)
++{
++	struct omap34xxcam_videodev *vdev = s->u.slave->master->priv;
++
++	switch (power) {
++	case V4L2_POWER_OFF:
++		isp_set_xclk(vdev->cam->isp, 0, CAM_USE_XCLKA);
++		break;
++
++	case V4L2_POWER_STANDBY:
++		break;
++
++	case V4L2_POWER_ON:
++		isp_set_xclk(vdev->cam->isp, MT9T111_CLK_MIN, CAM_USE_XCLKA);
++
++#if defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE)
++		isp_configure_interface(vdev->cam->isp, &mt9t111_if_config);
++#endif
++		break;
++
++	default:
++		return -ENODEV;
++		break;
++	}
++	return 0;
++}
++
++static struct mt9t111_platform_data mt9t111_pdata = {
++	.master		= "omap34xxcam",
++	.power_set	= mt9t111_power_set,
++	.priv_data_set	= mt9t111_set_prv_data,
++	.ifparm		= mt9t111_ifparm,
++	/* Some interface dependent params */
++	.clk_polarity	= 0, /* data clocked out on falling edge */
++	.hs_polarity	= 1, /* 0 - Active low, 1- Active high */
++	.vs_polarity	= 1, /* 0 - Active low, 1- Active high */
++};
++
++static struct i2c_board_info __initdata mt9t111_i2c_board_info = {
++	I2C_BOARD_INFO("mt9t111", MT9T111_I2C_ADDR),
++	.platform_data	= &mt9t111_pdata,
++};
++
++#endif				/* #ifdef CONFIG_VIDEO_MT9T111 */
++
++/**
++ * @brief omap3beaglelmb_init - module init function. Should be called before any
++ *                          client driver init call
++ *
++ * @return result of operation - 0 is success
++ */
++int __init omap3beaglelmb_init(void)
++{
++	int err;
++
++	/*
++	 * Register the I2C devices present in the board to the I2C
++	 * framework.
++	 * If more I2C devices are added, then each device information should
++	 * be registered with I2C using i2c_register_board_info().
++	 */
++#if defined(CONFIG_VIDEO_MT9T111) || defined(CONFIG_VIDEO_MT9T111_MODULE)
++	err = i2c_register_board_info(MT9T111_I2C_BUSNUM,
++					&mt9t111_i2c_board_info, 1);
++	if (err) {
++		printk(KERN_ERR MODULE_NAME \
++				": MT9T111 I2C Board Registration failed \n");
++		return err;
++	}
++#endif
++	printk(KERN_INFO MODULE_NAME ": Driver registration complete \n");
++
++	return 0;
++}
++arch_initcall(omap3beaglelmb_init);
+diff --git a/arch/arm/mach-omap2/board-omap3beagle-camera.h b/arch/arm/mach-omap2/board-omap3beagle-camera.h
+new file mode 100644
+index 0000000..1026aeb
+--- /dev/null
++++ b/arch/arm/mach-omap2/board-omap3beagle-camera.h
+@@ -0,0 +1,41 @@
++/*
++ * Copyright (C) 2010 Texas Instruments Inc
++ * Author: Sergio Aguirre <saaguirre@ti.com>
++ *
++ * Based on work done by:
++ *    Vaibhav Hiremath <hvaibhav@ti.com>
++ *    Anuj Aggarwal <anuj.aggarwal@ti.com>
++ *    Sivaraj R <sivaraj@ti.com>
++ *
++ * This package is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++
++#ifndef __BOARD_OMAP3BEAGLE_LMB_H_
++#define __BOARD_OMAP3BEAGLE_LMB_H_
++
++/* mux id to enable/disable signal routing to different peripherals */
++enum omap3beaglelmb_mux {
++	MUX_TVP5146 = 0,
++	MUX_CAMERA_SENSOR,
++	MUX_EXP_CAMERA_SENSOR,
++	NUM_MUX
++};
++
++/* enum to enable or disable mux */
++enum config_mux {
++	DISABLE_MUX,
++	ENABLE_MUX
++};
++
++#endif		/* __BOARD_OMAP3BEAGLE_LMB_H_ */
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index 93b9e5f..31de2f9 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -712,6 +712,31 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
+ 
+ #ifdef CONFIG_OMAP_MUX
+ static struct omap_board_mux board_mux[] __initdata = {
++	/* Camera - Parallel Data */
++	OMAP3_MUX(CAM_D0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
++	OMAP3_MUX(CAM_D1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
++	OMAP3_MUX(CAM_D2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
++	OMAP3_MUX(CAM_D3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
++	OMAP3_MUX(CAM_D4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
++	OMAP3_MUX(CAM_D5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
++	OMAP3_MUX(CAM_D6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
++	OMAP3_MUX(CAM_D7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
++	OMAP3_MUX(CAM_D8, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
++	OMAP3_MUX(CAM_D9, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
++	OMAP3_MUX(CAM_D10, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
++	OMAP3_MUX(CAM_D11, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
++	OMAP3_MUX(CAM_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
++
++	/* Camera - HS/VS signals */
++	OMAP3_MUX(CAM_HS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
++	OMAP3_MUX(CAM_VS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
++
++	/* Camera - Reset GPIO 98 */
++	OMAP3_MUX(CAM_FLD, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
++
++	/* Camera - XCLK */
++	OMAP3_MUX(CAM_XCLKA, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
++
+ 	{ .reg_offset = OMAP_MUX_TERMINATOR },
+ };
+ #else
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0005-TEMP-omap3beagle-camera-Add-defconfig.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0005-TEMP-omap3beagle-camera-Add-defconfig.patch
new file mode 100644
index 0000000..17f8f58
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0005-TEMP-omap3beagle-camera-Add-defconfig.patch
@@ -0,0 +1,3070 @@
+From 1f6871f7ea78c182ebc1ac4b743485b1d48f2882 Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Fri, 11 Jun 2010 16:18:30 -0500
+Subject: [PATCH 05/75] TEMP: omap3beagle: camera: Add defconfig
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ arch/arm/configs/omap3_beagle_cam_defconfig | 3050 +++++++++++++++++++++++++++
+ 1 files changed, 3050 insertions(+), 0 deletions(-)
+ create mode 100644 arch/arm/configs/omap3_beagle_cam_defconfig
+
+diff --git a/arch/arm/configs/omap3_beagle_cam_defconfig b/arch/arm/configs/omap3_beagle_cam_defconfig
+new file mode 100644
+index 0000000..0ea8300
+--- /dev/null
++++ b/arch/arm/configs/omap3_beagle_cam_defconfig
+@@ -0,0 +1,3050 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.32
++# Fri Jun 11 14:25:23 2010
++#
++CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_HAVE_LATENCYTOP_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++CONFIG_ARCH_HAS_CPUFREQ=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
++CONFIG_OPROFILE_ARMV7=y
++CONFIG_VECTORS_BASE=0xffff0000
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++CONFIG_CONSTRUCTORS=y
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_LOCK_KERNEL=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++# CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++CONFIG_BSD_PROCESS_ACCT=y
++# CONFIG_BSD_PROCESS_ACCT_V3 is not set
++CONFIG_TASKSTATS=y
++CONFIG_TASK_DELAY_ACCT=y
++CONFIG_TASK_XACCT=y
++CONFIG_TASK_IO_ACCOUNTING=y
++# CONFIG_AUDIT is not set
++
++#
++# RCU Subsystem
++#
++CONFIG_TREE_RCU=y
++# CONFIG_TREE_PREEMPT_RCU is not set
++# CONFIG_TINY_RCU is not set
++# CONFIG_RCU_TRACE is not set
++CONFIG_RCU_FANOUT=32
++# CONFIG_RCU_FANOUT_EXACT is not set
++# CONFIG_TREE_RCU_TRACE is not set
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=16
++CONFIG_GROUP_SCHED=y
++CONFIG_FAIR_GROUP_SCHED=y
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++# CONFIG_CGROUPS is not set
++# CONFIG_SYSFS_DEPRECATED_V2 is not set
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_RD_GZIP=y
++# CONFIG_RD_BZIP2 is not set
++# CONFIG_RD_LZMA is not set
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++CONFIG_ANON_INODES=y
++CONFIG_EMBEDDED=y
++CONFIG_UID16=y
++# CONFIG_SYSCTL_SYSCALL is not set
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++# CONFIG_ELF_CORE is not set
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_AIO=y
++
++#
++# Kernel Performance Events And Counters
++#
++CONFIG_VM_EVENT_COUNTERS=y
++# CONFIG_COMPAT_BRK is not set
++CONFIG_SLAB=y
++# CONFIG_SLUB is not set
++# CONFIG_SLOB is not set
++CONFIG_PROFILING=y
++CONFIG_TRACEPOINTS=y
++CONFIG_OPROFILE=y
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_HAVE_CLK=y
++
++#
++# GCOV-based kernel profiling
++#
++# CONFIG_GCOV_KERNEL is not set
++CONFIG_SLOW_WORK=y
++# CONFIG_SLOW_WORK_DEBUG is not set
++CONFIG_HAVE_GENERIC_DMA_COHERENT=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++CONFIG_MODULE_FORCE_LOAD=y
++CONFIG_MODULE_UNLOAD=y
++CONFIG_MODULE_FORCE_UNLOAD=y
++CONFIG_MODVERSIONS=y
++CONFIG_MODULE_SRCVERSION_ALL=y
++CONFIG_BLOCK=y
++CONFIG_LBDAF=y
++CONFIG_BLK_DEV_BSG=y
++# CONFIG_BLK_DEV_INTEGRITY is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++# CONFIG_DEFAULT_DEADLINE is not set
++CONFIG_DEFAULT_CFQ=y
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="cfq"
++# CONFIG_INLINE_SPIN_TRYLOCK is not set
++# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
++# CONFIG_INLINE_SPIN_LOCK is not set
++# CONFIG_INLINE_SPIN_LOCK_BH is not set
++# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
++# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
++# CONFIG_INLINE_SPIN_UNLOCK is not set
++# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
++# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
++# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
++# CONFIG_INLINE_READ_TRYLOCK is not set
++# CONFIG_INLINE_READ_LOCK is not set
++# CONFIG_INLINE_READ_LOCK_BH is not set
++# CONFIG_INLINE_READ_LOCK_IRQ is not set
++# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
++# CONFIG_INLINE_READ_UNLOCK is not set
++# CONFIG_INLINE_READ_UNLOCK_BH is not set
++# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
++# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
++# CONFIG_INLINE_WRITE_TRYLOCK is not set
++# CONFIG_INLINE_WRITE_LOCK is not set
++# CONFIG_INLINE_WRITE_LOCK_BH is not set
++# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
++# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
++# CONFIG_INLINE_WRITE_UNLOCK is not set
++# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
++# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
++# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
++# CONFIG_MUTEX_SPIN_ON_OWNER is not set
++CONFIG_FREEZER=y
++
++#
++# System Type
++#
++CONFIG_MMU=y
++# CONFIG_ARCH_AAEC2000 is not set
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_REALVIEW is not set
++# CONFIG_ARCH_VERSATILE is not set
++# CONFIG_ARCH_AT91 is not set
++# CONFIG_ARCH_CLPS711X is not set
++# CONFIG_ARCH_GEMINI is not set
++# CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_EP93XX is not set
++# CONFIG_ARCH_FOOTBRIDGE is not set
++# CONFIG_ARCH_MXC is not set
++# CONFIG_ARCH_STMP3XXX is not set
++# CONFIG_ARCH_NETX is not set
++# CONFIG_ARCH_H720X is not set
++# CONFIG_ARCH_NOMADIK is not set
++# CONFIG_ARCH_IOP13XX is not set
++# CONFIG_ARCH_IOP32X is not set
++# CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IXP23XX is not set
++# CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP4XX is not set
++# CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_DOVE is not set
++# CONFIG_ARCH_KIRKWOOD is not set
++# CONFIG_ARCH_LOKI is not set
++# CONFIG_ARCH_MV78XX0 is not set
++# CONFIG_ARCH_ORION5X is not set
++# CONFIG_ARCH_MMP is not set
++# CONFIG_ARCH_KS8695 is not set
++# CONFIG_ARCH_NS9XXX is not set
++# CONFIG_ARCH_W90X900 is not set
++# CONFIG_ARCH_PNX4008 is not set
++# CONFIG_ARCH_PXA is not set
++# CONFIG_ARCH_MSM is not set
++# CONFIG_ARCH_RPC is not set
++# CONFIG_ARCH_SA1100 is not set
++# CONFIG_ARCH_S3C2410 is not set
++# CONFIG_ARCH_S3C64XX is not set
++# CONFIG_ARCH_S5PC1XX is not set
++# CONFIG_ARCH_SHARK is not set
++# CONFIG_ARCH_LH7A40X is not set
++# CONFIG_ARCH_U300 is not set
++# CONFIG_ARCH_DAVINCI is not set
++CONFIG_ARCH_OMAP=y
++# CONFIG_ARCH_BCMRING is not set
++# CONFIG_ARCH_U8500 is not set
++
++#
++# TI OMAP Implementations
++#
++CONFIG_ARCH_OMAP_OTG=y
++# CONFIG_ARCH_OMAP1 is not set
++# CONFIG_ARCH_OMAP2 is not set
++CONFIG_ARCH_OMAP3=y
++# CONFIG_ARCH_OMAP4 is not set
++
++#
++# OMAP Feature Selections
++#
++CONFIG_OMAP_SMARTREFLEX=y
++# CONFIG_OMAP_SMARTREFLEX_TESTING is not set
++CONFIG_OMAP_RESET_CLOCKS=y
++# CONFIG_OMAP_MUX is not set
++CONFIG_OMAP_MCBSP=y
++CONFIG_OMAP_MBOX_FWK=m
++CONFIG_OMAP_IOMMU=y
++# CONFIG_OMAP_MPU_TIMER is not set
++CONFIG_OMAP_32K_TIMER=y
++# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
++# CONFIG_OMAP3_DEBOBS is not set
++CONFIG_OMAP_32K_TIMER_HZ=128
++CONFIG_OMAP_DM_TIMER=y
++# CONFIG_OMAP_LL_DEBUG_UART1 is not set
++# CONFIG_OMAP_LL_DEBUG_UART2 is not set
++CONFIG_OMAP_LL_DEBUG_UART3=y
++# CONFIG_OMAP_LL_DEBUG_NONE is not set
++# CONFIG_OMAP_PM_NONE is not set
++# CONFIG_OMAP_PM_NOOP is not set
++CONFIG_OMAP_PM_SRF=y
++CONFIG_ARCH_OMAP34XX=y
++CONFIG_ARCH_OMAP3430=y
++CONFIG_OMAP_PACKAGE_CBB=y
++
++#
++# OMAP Board Type
++#
++CONFIG_MACH_OMAP3_BEAGLE=y
++# CONFIG_MACH_OMAP_LDP is not set
++# CONFIG_MACH_OVERO is not set
++CONFIG_MACH_OMAP3EVM=y
++CONFIG_PMIC_TWL4030=y
++# CONFIG_MACH_OMAP3517EVM is not set
++# CONFIG_MACH_OMAP3_PANDORA is not set
++# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
++# CONFIG_MACH_OMAP_3430SDP is not set
++# CONFIG_MACH_NOKIA_RX51 is not set
++# CONFIG_MACH_OMAP_ZOOM2 is not set
++# CONFIG_MACH_OMAP_ZOOM3 is not set
++# CONFIG_MACH_CM_T35 is not set
++# CONFIG_MACH_IGEP0020 is not set
++# CONFIG_MACH_OMAP_3630SDP is not set
++# CONFIG_OMAP3_EMU is not set
++# CONFIG_OMAP3_SDRC_AC_TIMING is not set
++
++#
++# Processor Type
++#
++CONFIG_CPU_32=y
++CONFIG_CPU_32v6K=y
++CONFIG_CPU_V7=y
++CONFIG_CPU_32v7=y
++CONFIG_CPU_ABRT_EV7=y
++CONFIG_CPU_PABRT_V7=y
++CONFIG_CPU_CACHE_V7=y
++CONFIG_CPU_CACHE_VIPT=y
++CONFIG_CPU_COPY_V6=y
++CONFIG_CPU_TLB_V7=y
++CONFIG_CPU_HAS_ASID=y
++CONFIG_CPU_CP15=y
++CONFIG_CPU_CP15_MMU=y
++
++#
++# Processor Features
++#
++CONFIG_ARM_THUMB=y
++CONFIG_ARM_THUMBEE=y
++# CONFIG_CPU_ICACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_DISABLE is not set
++# CONFIG_CPU_BPREDICT_DISABLE is not set
++CONFIG_HAS_TLS_REG=y
++CONFIG_ARM_L1_CACHE_SHIFT=6
++CONFIG_USER_L2_PLE=y
++CONFIG_USER_PMON=y
++# CONFIG_ARM_ERRATA_430973 is not set
++# CONFIG_ARM_ERRATA_458693 is not set
++# CONFIG_ARM_ERRATA_460075 is not set
++CONFIG_COMMON_CLKDEV=y
++
++#
++# Bus support
++#
++# CONFIG_PCI_SYSCALL is not set
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Kernel Features
++#
++CONFIG_TICK_ONESHOT=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++CONFIG_VMSPLIT_3G=y
++# CONFIG_VMSPLIT_2G is not set
++# CONFIG_VMSPLIT_1G is not set
++CONFIG_PAGE_OFFSET=0xC0000000
++# CONFIG_PREEMPT_NONE is not set
++# CONFIG_PREEMPT_VOLUNTARY is not set
++CONFIG_PREEMPT=y
++CONFIG_HZ=128
++# CONFIG_THUMB2_KERNEL is not set
++CONFIG_AEABI=y
++# CONFIG_OABI_COMPAT is not set
++CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
++# CONFIG_HIGHMEM is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++CONFIG_PAGEFLAGS_EXTENDED=y
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_PHYS_ADDR_T_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
++# CONFIG_KSM is not set
++CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
++CONFIG_LEDS=y
++CONFIG_ALIGNMENT_TRAP=y
++# CONFIG_UACCESS_WITH_MEMCPY is not set
++CONFIG_CPU_V7_SYSFS=y
++
++#
++# Boot options
++#
++CONFIG_ZBOOT_ROM_TEXT=0x0
++CONFIG_ZBOOT_ROM_BSS=0x0
++CONFIG_CMDLINE=" debug "
++# CONFIG_XIP_KERNEL is not set
++CONFIG_KEXEC=y
++CONFIG_ATAGS_PROC=y
++
++#
++# CPU Power Management
++#
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_TABLE=y
++CONFIG_CPU_FREQ_DEBUG=y
++CONFIG_CPU_FREQ_STAT=y
++CONFIG_CPU_FREQ_STAT_DETAILS=y
++CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++CONFIG_CPU_FREQ_GOV_POWERSAVE=y
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
++# CONFIG_CPU_IDLE is not set
++
++#
++# Floating point emulation
++#
++
++#
++# At least one emulation must be selected
++#
++CONFIG_VFP=y
++CONFIG_VFPv3=y
++CONFIG_NEON=y
++
++#
++# Userspace binary formats
++#
++CONFIG_BINFMT_ELF=y
++CONFIG_HAVE_AOUT=y
++CONFIG_BINFMT_AOUT=m
++CONFIG_BINFMT_MISC=y
++
++#
++# Power management options
++#
++CONFIG_PM=y
++CONFIG_PM_DEBUG=y
++# CONFIG_PM_VERBOSE is not set
++CONFIG_CAN_PM_TRACE=y
++CONFIG_PM_SLEEP=y
++CONFIG_SUSPEND=y
++CONFIG_SUSPEND_FREEZER=y
++# CONFIG_APM_EMULATION is not set
++CONFIG_PM_RUNTIME=y
++CONFIG_ARCH_SUSPEND_POSSIBLE=y
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++CONFIG_PACKET_MMAP=y
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++# CONFIG_XFRM_USER is not set
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++CONFIG_XFRM_IPCOMP=m
++CONFIG_NET_KEY=y
++# CONFIG_NET_KEY_MIGRATE is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++CONFIG_IP_PNP_RARP=y
++CONFIG_NET_IPIP=m
++CONFIG_NET_IPGRE=m
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++CONFIG_INET_AH=m
++CONFIG_INET_ESP=m
++CONFIG_INET_IPCOMP=m
++CONFIG_INET_XFRM_TUNNEL=m
++CONFIG_INET_TUNNEL=m
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++CONFIG_INET_LRO=y
++CONFIG_INET_DIAG=m
++CONFIG_INET_TCP_DIAG=m
++CONFIG_TCP_CONG_ADVANCED=y
++CONFIG_TCP_CONG_BIC=m
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_TCP_CONG_WESTWOOD=m
++CONFIG_TCP_CONG_HTCP=m
++CONFIG_TCP_CONG_HSTCP=m
++CONFIG_TCP_CONG_HYBLA=m
++CONFIG_TCP_CONG_VEGAS=m
++CONFIG_TCP_CONG_SCALABLE=m
++CONFIG_TCP_CONG_LP=m
++CONFIG_TCP_CONG_VENO=m
++CONFIG_TCP_CONG_YEAH=m
++CONFIG_TCP_CONG_ILLINOIS=m
++# CONFIG_DEFAULT_BIC is not set
++CONFIG_DEFAULT_CUBIC=y
++# CONFIG_DEFAULT_HTCP is not set
++# CONFIG_DEFAULT_VEGAS is not set
++# CONFIG_DEFAULT_WESTWOOD is not set
++# CONFIG_DEFAULT_RENO is not set
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++CONFIG_IPV6=m
++# CONFIG_IPV6_PRIVACY is not set
++# CONFIG_IPV6_ROUTER_PREF is not set
++# CONFIG_IPV6_OPTIMISTIC_DAD is not set
++CONFIG_INET6_AH=m
++CONFIG_INET6_ESP=m
++CONFIG_INET6_IPCOMP=m
++CONFIG_IPV6_MIP6=m
++CONFIG_INET6_XFRM_TUNNEL=m
++CONFIG_INET6_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_TRANSPORT=m
++CONFIG_INET6_XFRM_MODE_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_BEET=m
++CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
++CONFIG_IPV6_SIT=m
++# CONFIG_IPV6_SIT_6RD is not set
++CONFIG_IPV6_NDISC_NODETYPE=y
++CONFIG_IPV6_TUNNEL=m
++CONFIG_IPV6_MULTIPLE_TABLES=y
++CONFIG_IPV6_SUBTREES=y
++CONFIG_IPV6_MROUTE=y
++# CONFIG_IPV6_PIMSM_V2 is not set
++# CONFIG_NETWORK_SECMARK is not set
++CONFIG_NETFILTER=y
++# CONFIG_NETFILTER_DEBUG is not set
++CONFIG_NETFILTER_ADVANCED=y
++CONFIG_BRIDGE_NETFILTER=y
++
++#
++# Core Netfilter Configuration
++#
++CONFIG_NETFILTER_NETLINK=m
++CONFIG_NETFILTER_NETLINK_QUEUE=m
++CONFIG_NETFILTER_NETLINK_LOG=m
++CONFIG_NF_CONNTRACK=m
++CONFIG_NF_CT_ACCT=y
++CONFIG_NF_CONNTRACK_MARK=y
++CONFIG_NF_CONNTRACK_EVENTS=y
++CONFIG_NF_CT_PROTO_DCCP=m
++CONFIG_NF_CT_PROTO_GRE=m
++CONFIG_NF_CT_PROTO_SCTP=m
++CONFIG_NF_CT_PROTO_UDPLITE=m
++CONFIG_NF_CONNTRACK_AMANDA=m
++CONFIG_NF_CONNTRACK_FTP=m
++CONFIG_NF_CONNTRACK_H323=m
++CONFIG_NF_CONNTRACK_IRC=m
++CONFIG_NF_CONNTRACK_NETBIOS_NS=m
++CONFIG_NF_CONNTRACK_PPTP=m
++CONFIG_NF_CONNTRACK_SANE=m
++CONFIG_NF_CONNTRACK_SIP=m
++CONFIG_NF_CONNTRACK_TFTP=m
++CONFIG_NF_CT_NETLINK=m
++# CONFIG_NETFILTER_TPROXY is not set
++CONFIG_NETFILTER_XTABLES=m
++CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
++CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
++# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
++CONFIG_NETFILTER_XT_TARGET_HL=m
++# CONFIG_NETFILTER_XT_TARGET_LED is not set
++CONFIG_NETFILTER_XT_TARGET_MARK=m
++CONFIG_NETFILTER_XT_TARGET_NFLOG=m
++CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
++# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
++CONFIG_NETFILTER_XT_TARGET_RATEEST=m
++# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
++CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
++# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
++# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
++CONFIG_NETFILTER_XT_MATCH_COMMENT=m
++CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
++CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
++CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
++CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
++CONFIG_NETFILTER_XT_MATCH_DCCP=m
++CONFIG_NETFILTER_XT_MATCH_DSCP=m
++CONFIG_NETFILTER_XT_MATCH_ESP=m
++CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
++CONFIG_NETFILTER_XT_MATCH_HELPER=m
++CONFIG_NETFILTER_XT_MATCH_HL=m
++CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
++CONFIG_NETFILTER_XT_MATCH_LENGTH=m
++CONFIG_NETFILTER_XT_MATCH_LIMIT=m
++CONFIG_NETFILTER_XT_MATCH_MAC=m
++CONFIG_NETFILTER_XT_MATCH_MARK=m
++CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
++CONFIG_NETFILTER_XT_MATCH_OWNER=m
++CONFIG_NETFILTER_XT_MATCH_POLICY=m
++# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
++CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
++CONFIG_NETFILTER_XT_MATCH_QUOTA=m
++CONFIG_NETFILTER_XT_MATCH_RATEEST=m
++CONFIG_NETFILTER_XT_MATCH_REALM=m
++CONFIG_NETFILTER_XT_MATCH_RECENT=m
++# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
++CONFIG_NETFILTER_XT_MATCH_SCTP=m
++CONFIG_NETFILTER_XT_MATCH_STATE=m
++CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
++CONFIG_NETFILTER_XT_MATCH_STRING=m
++CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
++CONFIG_NETFILTER_XT_MATCH_TIME=m
++CONFIG_NETFILTER_XT_MATCH_U32=m
++# CONFIG_NETFILTER_XT_MATCH_OSF is not set
++CONFIG_IP_VS=m
++CONFIG_IP_VS_IPV6=y
++CONFIG_IP_VS_DEBUG=y
++CONFIG_IP_VS_TAB_BITS=12
++
++#
++# IPVS transport protocol load balancing support
++#
++CONFIG_IP_VS_PROTO_TCP=y
++CONFIG_IP_VS_PROTO_UDP=y
++CONFIG_IP_VS_PROTO_AH_ESP=y
++CONFIG_IP_VS_PROTO_ESP=y
++CONFIG_IP_VS_PROTO_AH=y
++
++#
++# IPVS scheduler
++#
++CONFIG_IP_VS_RR=m
++CONFIG_IP_VS_WRR=m
++CONFIG_IP_VS_LC=m
++CONFIG_IP_VS_WLC=m
++CONFIG_IP_VS_LBLC=m
++CONFIG_IP_VS_LBLCR=m
++CONFIG_IP_VS_DH=m
++CONFIG_IP_VS_SH=m
++CONFIG_IP_VS_SED=m
++CONFIG_IP_VS_NQ=m
++
++#
++# IPVS application helper
++#
++CONFIG_IP_VS_FTP=m
++
++#
++# IP: Netfilter Configuration
++#
++CONFIG_NF_DEFRAG_IPV4=m
++CONFIG_NF_CONNTRACK_IPV4=m
++CONFIG_NF_CONNTRACK_PROC_COMPAT=y
++CONFIG_IP_NF_QUEUE=m
++CONFIG_IP_NF_IPTABLES=m
++CONFIG_IP_NF_MATCH_ADDRTYPE=m
++CONFIG_IP_NF_MATCH_AH=m
++CONFIG_IP_NF_MATCH_ECN=m
++CONFIG_IP_NF_MATCH_TTL=m
++CONFIG_IP_NF_FILTER=m
++CONFIG_IP_NF_TARGET_REJECT=m
++CONFIG_IP_NF_TARGET_LOG=m
++CONFIG_IP_NF_TARGET_ULOG=m
++CONFIG_NF_NAT=m
++CONFIG_NF_NAT_NEEDED=y
++CONFIG_IP_NF_TARGET_MASQUERADE=m
++CONFIG_IP_NF_TARGET_NETMAP=m
++CONFIG_IP_NF_TARGET_REDIRECT=m
++CONFIG_NF_NAT_SNMP_BASIC=m
++CONFIG_NF_NAT_PROTO_DCCP=m
++CONFIG_NF_NAT_PROTO_GRE=m
++CONFIG_NF_NAT_PROTO_UDPLITE=m
++CONFIG_NF_NAT_PROTO_SCTP=m
++CONFIG_NF_NAT_FTP=m
++CONFIG_NF_NAT_IRC=m
++CONFIG_NF_NAT_TFTP=m
++CONFIG_NF_NAT_AMANDA=m
++CONFIG_NF_NAT_PPTP=m
++CONFIG_NF_NAT_H323=m
++CONFIG_NF_NAT_SIP=m
++CONFIG_IP_NF_MANGLE=m
++CONFIG_IP_NF_TARGET_CLUSTERIP=m
++CONFIG_IP_NF_TARGET_ECN=m
++CONFIG_IP_NF_TARGET_TTL=m
++CONFIG_IP_NF_RAW=m
++CONFIG_IP_NF_ARPTABLES=m
++CONFIG_IP_NF_ARPFILTER=m
++CONFIG_IP_NF_ARP_MANGLE=m
++
++#
++# IPv6: Netfilter Configuration
++#
++CONFIG_NF_CONNTRACK_IPV6=m
++CONFIG_IP6_NF_QUEUE=m
++CONFIG_IP6_NF_IPTABLES=m
++CONFIG_IP6_NF_MATCH_AH=m
++CONFIG_IP6_NF_MATCH_EUI64=m
++CONFIG_IP6_NF_MATCH_FRAG=m
++CONFIG_IP6_NF_MATCH_OPTS=m
++CONFIG_IP6_NF_MATCH_HL=m
++CONFIG_IP6_NF_MATCH_IPV6HEADER=m
++CONFIG_IP6_NF_MATCH_MH=m
++CONFIG_IP6_NF_MATCH_RT=m
++CONFIG_IP6_NF_TARGET_HL=m
++CONFIG_IP6_NF_TARGET_LOG=m
++CONFIG_IP6_NF_FILTER=m
++CONFIG_IP6_NF_TARGET_REJECT=m
++CONFIG_IP6_NF_MANGLE=m
++CONFIG_IP6_NF_RAW=m
++# CONFIG_BRIDGE_NF_EBTABLES is not set
++CONFIG_IP_DCCP=m
++CONFIG_INET_DCCP_DIAG=m
++
++#
++# DCCP CCIDs Configuration (EXPERIMENTAL)
++#
++# CONFIG_IP_DCCP_CCID2_DEBUG is not set
++CONFIG_IP_DCCP_CCID3=y
++# CONFIG_IP_DCCP_CCID3_DEBUG is not set
++CONFIG_IP_DCCP_CCID3_RTO=100
++CONFIG_IP_DCCP_TFRC_LIB=y
++
++#
++# DCCP Kernel Hacking
++#
++# CONFIG_IP_DCCP_DEBUG is not set
++CONFIG_IP_SCTP=m
++# CONFIG_SCTP_DBG_MSG is not set
++# CONFIG_SCTP_DBG_OBJCNT is not set
++# CONFIG_SCTP_HMAC_NONE is not set
++# CONFIG_SCTP_HMAC_SHA1 is not set
++CONFIG_SCTP_HMAC_MD5=y
++# CONFIG_RDS is not set
++CONFIG_TIPC=m
++# CONFIG_TIPC_ADVANCED is not set
++# CONFIG_TIPC_DEBUG is not set
++CONFIG_ATM=m
++CONFIG_ATM_CLIP=m
++# CONFIG_ATM_CLIP_NO_ICMP is not set
++CONFIG_ATM_LANE=m
++CONFIG_ATM_MPOA=m
++CONFIG_ATM_BR2684=m
++# CONFIG_ATM_BR2684_IPFILTER is not set
++CONFIG_STP=m
++CONFIG_GARP=m
++CONFIG_BRIDGE=m
++# CONFIG_NET_DSA is not set
++CONFIG_VLAN_8021Q=m
++CONFIG_VLAN_8021Q_GVRP=y
++# CONFIG_DECNET is not set
++CONFIG_LLC=m
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++CONFIG_WAN_ROUTER=m
++# CONFIG_PHONET is not set
++# CONFIG_IEEE802154 is not set
++CONFIG_NET_SCHED=y
++
++#
++# Queueing/Scheduling
++#
++CONFIG_NET_SCH_CBQ=m
++CONFIG_NET_SCH_HTB=m
++CONFIG_NET_SCH_HFSC=m
++CONFIG_NET_SCH_ATM=m
++CONFIG_NET_SCH_PRIO=m
++CONFIG_NET_SCH_MULTIQ=m
++CONFIG_NET_SCH_RED=m
++CONFIG_NET_SCH_SFQ=m
++CONFIG_NET_SCH_TEQL=m
++CONFIG_NET_SCH_TBF=m
++CONFIG_NET_SCH_GRED=m
++CONFIG_NET_SCH_DSMARK=m
++CONFIG_NET_SCH_NETEM=m
++CONFIG_NET_SCH_DRR=m
++
++#
++# Classification
++#
++CONFIG_NET_CLS=y
++CONFIG_NET_CLS_BASIC=m
++CONFIG_NET_CLS_TCINDEX=m
++CONFIG_NET_CLS_ROUTE4=m
++CONFIG_NET_CLS_ROUTE=y
++CONFIG_NET_CLS_FW=m
++CONFIG_NET_CLS_U32=m
++CONFIG_CLS_U32_PERF=y
++CONFIG_CLS_U32_MARK=y
++CONFIG_NET_CLS_RSVP=m
++CONFIG_NET_CLS_RSVP6=m
++CONFIG_NET_CLS_FLOW=m
++# CONFIG_NET_EMATCH is not set
++# CONFIG_NET_CLS_ACT is not set
++CONFIG_NET_CLS_IND=y
++CONFIG_NET_SCH_FIFO=y
++# CONFIG_DCB is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_NET_DROP_MONITOR is not set
++# CONFIG_HAMRADIO is not set
++CONFIG_CAN=m
++CONFIG_CAN_RAW=m
++CONFIG_CAN_BCM=m
++
++#
++# CAN Device Drivers
++#
++CONFIG_CAN_VCAN=m
++# CONFIG_CAN_DEV is not set
++# CONFIG_CAN_DEBUG_DEVICES is not set
++CONFIG_IRDA=m
++
++#
++# IrDA protocols
++#
++CONFIG_IRLAN=m
++CONFIG_IRNET=m
++CONFIG_IRCOMM=m
++CONFIG_IRDA_ULTRA=y
++
++#
++# IrDA options
++#
++CONFIG_IRDA_CACHE_LAST_LSAP=y
++CONFIG_IRDA_FAST_RR=y
++CONFIG_IRDA_DEBUG=y
++
++#
++# Infrared-port device drivers
++#
++
++#
++# SIR device drivers
++#
++CONFIG_IRTTY_SIR=m
++
++#
++# Dongle support
++#
++CONFIG_DONGLE=y
++CONFIG_ESI_DONGLE=m
++CONFIG_ACTISYS_DONGLE=m
++CONFIG_TEKRAM_DONGLE=m
++CONFIG_TOIM3232_DONGLE=m
++CONFIG_LITELINK_DONGLE=m
++CONFIG_MA600_DONGLE=m
++CONFIG_GIRBIL_DONGLE=m
++CONFIG_MCP2120_DONGLE=m
++CONFIG_OLD_BELKIN_DONGLE=m
++# CONFIG_ACT200L_DONGLE is not set
++CONFIG_KINGSUN_DONGLE=m
++CONFIG_KSDAZZLE_DONGLE=m
++CONFIG_KS959_DONGLE=m
++
++#
++# FIR device drivers
++#
++CONFIG_USB_IRDA=m
++CONFIG_SIGMATEL_FIR=m
++CONFIG_MCS_FIR=m
++CONFIG_BT=m
++CONFIG_BT_L2CAP=m
++CONFIG_BT_SCO=m
++CONFIG_BT_RFCOMM=m
++CONFIG_BT_RFCOMM_TTY=y
++CONFIG_BT_BNEP=m
++CONFIG_BT_BNEP_MC_FILTER=y
++CONFIG_BT_BNEP_PROTO_FILTER=y
++CONFIG_BT_HIDP=m
++
++#
++# Bluetooth device drivers
++#
++CONFIG_BT_HCIBTUSB=m
++CONFIG_BT_HCIBTSDIO=m
++CONFIG_BT_HCIUART=m
++CONFIG_BT_HCIUART_H4=y
++CONFIG_BT_HCIUART_BCSP=y
++CONFIG_BT_HCIUART_LL=y
++CONFIG_BT_HCIBCM203X=m
++CONFIG_BT_HCIBPA10X=m
++CONFIG_BT_HCIBFUSB=m
++# CONFIG_BT_HCIVHCI is not set
++# CONFIG_BT_MRVL is not set
++CONFIG_AF_RXRPC=m
++# CONFIG_AF_RXRPC_DEBUG is not set
++# CONFIG_RXKAD is not set
++CONFIG_FIB_RULES=y
++CONFIG_WIRELESS=y
++CONFIG_WIRELESS_EXT=y
++CONFIG_WEXT_CORE=y
++CONFIG_WEXT_PROC=y
++CONFIG_WEXT_SPY=y
++CONFIG_WEXT_PRIV=y
++CONFIG_CFG80211=m
++# CONFIG_NL80211_TESTMODE is not set
++# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
++# CONFIG_CFG80211_REG_DEBUG is not set
++CONFIG_CFG80211_DEFAULT_PS=y
++# CONFIG_CFG80211_DEBUGFS is not set
++CONFIG_WIRELESS_OLD_REGULATORY=y
++CONFIG_CFG80211_WEXT=y
++CONFIG_WIRELESS_EXT_SYSFS=y
++CONFIG_LIB80211=y
++CONFIG_LIB80211_CRYPT_WEP=m
++CONFIG_LIB80211_CRYPT_CCMP=m
++CONFIG_LIB80211_CRYPT_TKIP=m
++# CONFIG_LIB80211_DEBUG is not set
++CONFIG_MAC80211=m
++CONFIG_MAC80211_RC_PID=y
++# CONFIG_MAC80211_RC_MINSTREL is not set
++CONFIG_MAC80211_RC_DEFAULT_PID=y
++# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
++CONFIG_MAC80211_RC_DEFAULT="pid"
++# CONFIG_MAC80211_MESH is not set
++CONFIG_MAC80211_LEDS=y
++# CONFIG_MAC80211_DEBUGFS is not set
++# CONFIG_MAC80211_DEBUG_MENU is not set
++CONFIG_WIMAX=m
++CONFIG_WIMAX_DEBUG_LEVEL=8
++CONFIG_RFKILL=m
++CONFIG_RFKILL_LEDS=y
++CONFIG_RFKILL_INPUT=y
++CONFIG_NET_9P=m
++# CONFIG_NET_9P_DEBUG is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH=""
++CONFIG_DEVTMPFS=y
++CONFIG_DEVTMPFS_MOUNT=y
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=y
++CONFIG_FIRMWARE_IN_KERNEL=y
++CONFIG_EXTRA_FIRMWARE=""
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_TESTS is not set
++CONFIG_MTD_CONCAT=y
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++# CONFIG_MTD_CMDLINE_PARTS is not set
++# CONFIG_MTD_AFS_PARTS is not set
++# CONFIG_MTD_AR7_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++# CONFIG_MTD_CFI is not set
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_DATAFLASH is not set
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SST25L is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++CONFIG_MTD_NAND=y
++# CONFIG_MTD_NAND_VERIFY_WRITE is not set
++# CONFIG_MTD_NAND_ECC_SMC is not set
++# CONFIG_MTD_NAND_MUSEUM_IDS is not set
++# CONFIG_MTD_NAND_GPIO is not set
++CONFIG_MTD_NAND_OMAP2=y
++CONFIG_MTD_NAND_OMAP_PREFETCH=y
++# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
++CONFIG_MTD_NAND_IDS=y
++# CONFIG_MTD_NAND_DISKONCHIP is not set
++# CONFIG_MTD_NAND_NANDSIM is not set
++CONFIG_MTD_NAND_PLATFORM=y
++# CONFIG_MTD_ALAUDA is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# LPDDR flash memory drivers
++#
++# CONFIG_MTD_LPDDR is not set
++
++#
++# UBI - Unsorted block images
++#
++CONFIG_MTD_UBI=y
++CONFIG_MTD_UBI_WL_THRESHOLD=4096
++CONFIG_MTD_UBI_BEB_RESERVE=1
++# CONFIG_MTD_UBI_GLUEBI is not set
++
++#
++# UBI debugging options
++#
++# CONFIG_MTD_UBI_DEBUG is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++CONFIG_BLK_DEV_CRYPTOLOOP=m
++
++#
++# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
++#
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_UB is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=16384
++# CONFIG_BLK_DEV_XIP is not set
++CONFIG_CDROM_PKTCDVD=m
++CONFIG_CDROM_PKTCDVD_BUFFERS=8
++# CONFIG_CDROM_PKTCDVD_WCACHE is not set
++# CONFIG_ATA_OVER_ETH is not set
++# CONFIG_MG_DISK is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_AD525X_DPOT is not set
++# CONFIG_ICS932S401 is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
++# CONFIG_ISL29003 is not set
++# CONFIG_DS1682 is not set
++# CONFIG_TI_DAC7512 is not set
++# CONFIG_C2PORT is not set
++
++#
++# EEPROM support
++#
++# CONFIG_EEPROM_AT24 is not set
++# CONFIG_EEPROM_AT25 is not set
++# CONFIG_EEPROM_LEGACY is not set
++# CONFIG_EEPROM_MAX6875 is not set
++CONFIG_EEPROM_93CX6=y
++CONFIG_IWMC3200TOP=m
++# CONFIG_IWMC3200TOP_DEBUG is not set
++# CONFIG_IWMC3200TOP_DEBUGFS is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++CONFIG_RAID_ATTRS=m
++CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=y
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++CONFIG_BLK_DEV_SR=y
++CONFIG_BLK_DEV_SR_VENDOR=y
++CONFIG_CHR_DEV_SG=y
++CONFIG_CHR_DEV_SCH=m
++CONFIG_SCSI_MULTI_LUN=y
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++CONFIG_SCSI_ISCSI_ATTRS=m
++# CONFIG_SCSI_SAS_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
++CONFIG_ISCSI_TCP=m
++# CONFIG_LIBFC is not set
++# CONFIG_LIBFCOE is not set
++# CONFIG_SCSI_DEBUG is not set
++# CONFIG_SCSI_DH is not set
++# CONFIG_SCSI_OSD_INITIATOR is not set
++# CONFIG_ATA is not set
++CONFIG_MD=y
++CONFIG_BLK_DEV_MD=m
++CONFIG_MD_LINEAR=m
++CONFIG_MD_RAID0=m
++CONFIG_MD_RAID1=m
++CONFIG_MD_RAID10=m
++CONFIG_MD_RAID456=m
++CONFIG_MD_RAID6_PQ=m
++# CONFIG_ASYNC_RAID6_TEST is not set
++CONFIG_MD_MULTIPATH=m
++CONFIG_MD_FAULTY=m
++CONFIG_BLK_DEV_DM=m
++# CONFIG_DM_DEBUG is not set
++CONFIG_DM_CRYPT=m
++CONFIG_DM_SNAPSHOT=m
++CONFIG_DM_MIRROR=m
++# CONFIG_DM_LOG_USERSPACE is not set
++CONFIG_DM_ZERO=m
++CONFIG_DM_MULTIPATH=m
++# CONFIG_DM_MULTIPATH_QL is not set
++# CONFIG_DM_MULTIPATH_ST is not set
++CONFIG_DM_DELAY=m
++# CONFIG_DM_UEVENT is not set
++CONFIG_NETDEVICES=y
++CONFIG_DUMMY=m
++CONFIG_BONDING=m
++CONFIG_MACVLAN=m
++CONFIG_EQUALIZER=m
++CONFIG_TUN=m
++CONFIG_VETH=m
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_NATIONAL_PHY is not set
++# CONFIG_STE10XP is not set
++# CONFIG_LSI_ET1011C_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++# CONFIG_AX88796 is not set
++# CONFIG_SMC91X is not set
++# CONFIG_TI_DAVINCI_EMAC is not set
++# CONFIG_DM9000 is not set
++CONFIG_ENC28J60=y
++# CONFIG_ENC28J60_WRITEVERIFY is not set
++# CONFIG_ETHOC is not set
++CONFIG_SMC911X=y
++CONFIG_SMSC911X=y
++# CONFIG_DNET is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
++# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
++# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
++# CONFIG_B44 is not set
++# CONFIG_KS8842 is not set
++CONFIG_KS8851=y
++# CONFIG_KS8851_MLL is not set
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++CONFIG_WLAN=y
++# CONFIG_LIBERTAS_THINFIRM is not set
++CONFIG_AT76C50X_USB=m
++CONFIG_USB_ZD1201=m
++CONFIG_USB_NET_RNDIS_WLAN=m
++CONFIG_RTL8187=m
++CONFIG_RTL8187_LEDS=y
++# CONFIG_MAC80211_HWSIM is not set
++# CONFIG_ATH_COMMON is not set
++CONFIG_B43=m
++# CONFIG_B43_SDIO is not set
++CONFIG_B43_PHY_LP=y
++CONFIG_B43_LEDS=y
++CONFIG_B43_HWRNG=y
++# CONFIG_B43_DEBUG is not set
++# CONFIG_B43LEGACY is not set
++CONFIG_HOSTAP=m
++CONFIG_HOSTAP_FIRMWARE=y
++CONFIG_HOSTAP_FIRMWARE_NVRAM=y
++# CONFIG_IWM is not set
++CONFIG_LIBERTAS=m
++CONFIG_LIBERTAS_USB=m
++# CONFIG_LIBERTAS_SDIO is not set
++# CONFIG_LIBERTAS_SPI is not set
++# CONFIG_LIBERTAS_DEBUG is not set
++CONFIG_P54_COMMON=m
++CONFIG_P54_USB=m
++# CONFIG_P54_SPI is not set
++CONFIG_P54_LEDS=y
++CONFIG_RT2X00=m
++CONFIG_RT2500USB=m
++CONFIG_RT73USB=m
++# CONFIG_RT2800USB is not set
++CONFIG_RT2X00_LIB_USB=m
++CONFIG_RT2X00_LIB=m
++CONFIG_RT2X00_LIB_FIRMWARE=y
++CONFIG_RT2X00_LIB_CRYPTO=y
++CONFIG_RT2X00_LIB_LEDS=y
++# CONFIG_RT2X00_DEBUG is not set
++CONFIG_WL12XX=m
++CONFIG_WL1251=m
++CONFIG_WL1251_SPI=m
++CONFIG_WL1251_SDIO=m
++CONFIG_WL1271=m
++CONFIG_ZD1211RW=m
++# CONFIG_ZD1211RW_DEBUG is not set
++
++#
++# WiMAX Wireless Broadband devices
++#
++CONFIG_WIMAX_I2400M=m
++CONFIG_WIMAX_I2400M_USB=m
++CONFIG_WIMAX_I2400M_SDIO=m
++CONFIG_WIMAX_IWMC3200_SDIO=y
++CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
++
++#
++# USB Network Adapters
++#
++CONFIG_USB_CATC=y
++CONFIG_USB_KAWETH=y
++CONFIG_USB_PEGASUS=y
++CONFIG_USB_RTL8150=y
++CONFIG_USB_USBNET=y
++CONFIG_USB_NET_AX8817X=y
++CONFIG_USB_NET_CDCETHER=y
++CONFIG_USB_NET_CDC_EEM=y
++CONFIG_USB_NET_DM9601=y
++CONFIG_USB_NET_SMSC95XX=y
++CONFIG_USB_NET_GL620A=y
++CONFIG_USB_NET_NET1080=y
++CONFIG_USB_NET_PLUSB=y
++CONFIG_USB_NET_MCS7830=y
++CONFIG_USB_NET_RNDIS_HOST=y
++CONFIG_USB_NET_CDC_SUBSET=y
++CONFIG_USB_ALI_M5632=y
++CONFIG_USB_AN2720=y
++CONFIG_USB_BELKIN=y
++CONFIG_USB_ARMLINUX=y
++CONFIG_USB_EPSON2888=y
++CONFIG_USB_KC2190=y
++CONFIG_USB_NET_ZAURUS=y
++CONFIG_USB_HSO=m
++CONFIG_USB_NET_INT51X1=m
++# CONFIG_WAN is not set
++CONFIG_ATM_DRIVERS=y
++# CONFIG_ATM_DUMMY is not set
++# CONFIG_ATM_TCP is not set
++CONFIG_PPP=m
++CONFIG_PPP_MULTILINK=y
++CONFIG_PPP_FILTER=y
++CONFIG_PPP_ASYNC=m
++CONFIG_PPP_SYNC_TTY=m
++CONFIG_PPP_DEFLATE=m
++CONFIG_PPP_BSDCOMP=m
++CONFIG_PPP_MPPE=m
++CONFIG_PPPOE=m
++# CONFIG_PPPOATM is not set
++CONFIG_PPPOL2TP=m
++# CONFIG_SLIP is not set
++CONFIG_SLHC=m
++CONFIG_NETCONSOLE=m
++CONFIG_NETCONSOLE_DYNAMIC=y
++CONFIG_NETPOLL=y
++CONFIG_NETPOLL_TRAP=y
++CONFIG_NET_POLL_CONTROLLER=y
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++CONFIG_INPUT_FF_MEMLESS=y
++CONFIG_INPUT_POLLDEV=y
++# CONFIG_INPUT_SPARSEKMAP is not set
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=y
++CONFIG_INPUT_MOUSEDEV_PSAUX=y
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++CONFIG_INPUT_EVDEV=y
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ADP5588 is not set
++# CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_QT2160 is not set
++# CONFIG_KEYBOARD_LKKBD is not set
++CONFIG_KEYBOARD_GPIO=y
++# CONFIG_KEYBOARD_TCA6416 is not set
++# CONFIG_KEYBOARD_MATRIX is not set
++# CONFIG_KEYBOARD_LM8323 is not set
++# CONFIG_KEYBOARD_MAX7359 is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_OPENCORES is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_TWL4030 is not set
++# CONFIG_KEYBOARD_XTKBD is not set
++CONFIG_INPUT_MOUSE=y
++CONFIG_MOUSE_PS2=y
++CONFIG_MOUSE_PS2_ALPS=y
++CONFIG_MOUSE_PS2_LOGIPS2PP=y
++CONFIG_MOUSE_PS2_SYNAPTICS=y
++CONFIG_MOUSE_PS2_TRACKPOINT=y
++# CONFIG_MOUSE_PS2_ELANTECH is not set
++# CONFIG_MOUSE_PS2_SENTELIC is not set
++# CONFIG_MOUSE_PS2_TOUCHKIT is not set
++# CONFIG_MOUSE_SERIAL is not set
++# CONFIG_MOUSE_APPLETOUCH is not set
++# CONFIG_MOUSE_BCM5974 is not set
++# CONFIG_MOUSE_VSXXXAA is not set
++# CONFIG_MOUSE_GPIO is not set
++# CONFIG_MOUSE_SYNAPTICS_I2C is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++CONFIG_INPUT_MISC=y
++# CONFIG_INPUT_ATI_REMOTE is not set
++# CONFIG_INPUT_ATI_REMOTE2 is not set
++# CONFIG_INPUT_KEYSPAN_REMOTE is not set
++# CONFIG_INPUT_POWERMATE is not set
++# CONFIG_INPUT_YEALINK is not set
++# CONFIG_INPUT_CM109 is not set
++CONFIG_INPUT_TWL4030_PWRBUTTON=y
++CONFIG_INPUT_UINPUT=y
++# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
++
++#
++# Hardware I/O ports
++#
++CONFIG_SERIO=y
++CONFIG_SERIO_SERPORT=y
++CONFIG_SERIO_LIBPS2=y
++# CONFIG_SERIO_RAW is not set
++# CONFIG_SERIO_ALTERA_PS2 is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_CONSOLE_TRANSLATIONS=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++CONFIG_VT_HW_CONSOLE_BINDING=y
++CONFIG_DEVKMEM=y
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++CONFIG_SERIAL_8250_NR_UARTS=32
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++CONFIG_SERIAL_8250_EXTENDED=y
++CONFIG_SERIAL_8250_MANY_PORTS=y
++CONFIG_SERIAL_8250_SHARE_IRQ=y
++CONFIG_SERIAL_8250_DETECT_IRQ=y
++CONFIG_SERIAL_8250_RSA=y
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_MAX3100 is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_IPMI_HANDLER is not set
++CONFIG_HW_RANDOM=y
++# CONFIG_HW_RANDOM_TIMERIOMEM is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_COMPAT=y
++CONFIG_I2C_CHARDEV=y
++CONFIG_I2C_HELPER_AUTO=y
++
++#
++# I2C Hardware Bus support
++#
++
++#
++# I2C system bus drivers (mostly embedded / system-on-chip)
++#
++# CONFIG_I2C_DESIGNWARE is not set
++# CONFIG_I2C_GPIO is not set
++# CONFIG_I2C_OCORES is not set
++CONFIG_I2C_OMAP=y
++# CONFIG_I2C_SIMTEC is not set
++
++#
++# External I2C/SMBus adapter drivers
++#
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_TINY_USB is not set
++
++#
++# Other I2C/SMBus bus drivers
++#
++# CONFIG_I2C_PCA_PLATFORM is not set
++# CONFIG_I2C_STUB is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++# CONFIG_SPI_BITBANG is not set
++# CONFIG_SPI_GPIO is not set
++CONFIG_SPI_OMAP24XX=y
++# CONFIG_SPI_XILINX is not set
++
++#
++# SPI Protocol Masters
++#
++CONFIG_SPI_SPIDEV=y
++# CONFIG_SPI_TLE62X0 is not set
++
++#
++# PPS support
++#
++# CONFIG_PPS is not set
++CONFIG_ARCH_REQUIRE_GPIOLIB=y
++CONFIG_GPIOLIB=y
++# CONFIG_DEBUG_GPIO is not set
++CONFIG_GPIO_SYSFS=y
++
++#
++# Memory mapped GPIO expanders:
++#
++
++#
++# I2C GPIO expanders:
++#
++# CONFIG_GPIO_MAX732X is not set
++# CONFIG_GPIO_PCA953X is not set
++# CONFIG_GPIO_PCF857X is not set
++CONFIG_GPIO_TWL4030=y
++
++#
++# PCI GPIO expanders:
++#
++
++#
++# SPI GPIO expanders:
++#
++# CONFIG_GPIO_MAX7301 is not set
++# CONFIG_GPIO_MCP23S08 is not set
++# CONFIG_GPIO_MC33880 is not set
++
++#
++# AC97 GPIO expanders:
++#
++# CONFIG_W1 is not set
++CONFIG_POWER_SUPPLY=m
++# CONFIG_POWER_SUPPLY_DEBUG is not set
++# CONFIG_PDA_POWER is not set
++# CONFIG_BATTERY_DS2760 is not set
++# CONFIG_BATTERY_DS2782 is not set
++# CONFIG_BATTERY_BQ27x00 is not set
++# CONFIG_BATTERY_MAX17040 is not set
++CONFIG_HWMON=y
++# CONFIG_HWMON_VID is not set
++# CONFIG_HWMON_DEBUG_CHIP is not set
++
++#
++# Native drivers
++#
++# CONFIG_SENSORS_AD7414 is not set
++# CONFIG_SENSORS_AD7418 is not set
++# CONFIG_SENSORS_ADCXX is not set
++# CONFIG_SENSORS_ADM1021 is not set
++# CONFIG_SENSORS_ADM1025 is not set
++# CONFIG_SENSORS_ADM1026 is not set
++# CONFIG_SENSORS_ADM1029 is not set
++# CONFIG_SENSORS_ADM1031 is not set
++# CONFIG_SENSORS_ADM9240 is not set
++# CONFIG_SENSORS_ADT7462 is not set
++# CONFIG_SENSORS_ADT7470 is not set
++# CONFIG_SENSORS_ADT7473 is not set
++# CONFIG_SENSORS_ADT7475 is not set
++# CONFIG_SENSORS_ATXP1 is not set
++# CONFIG_SENSORS_DS1621 is not set
++# CONFIG_SENSORS_F71805F is not set
++# CONFIG_SENSORS_F71882FG is not set
++# CONFIG_SENSORS_F75375S is not set
++# CONFIG_SENSORS_G760A is not set
++# CONFIG_SENSORS_GL518SM is not set
++# CONFIG_SENSORS_GL520SM is not set
++# CONFIG_SENSORS_IT87 is not set
++# CONFIG_SENSORS_LM63 is not set
++# CONFIG_SENSORS_LM70 is not set
++# CONFIG_SENSORS_LM73 is not set
++# CONFIG_SENSORS_LM75 is not set
++# CONFIG_SENSORS_LM77 is not set
++# CONFIG_SENSORS_LM78 is not set
++# CONFIG_SENSORS_LM80 is not set
++# CONFIG_SENSORS_LM83 is not set
++# CONFIG_SENSORS_LM85 is not set
++# CONFIG_SENSORS_LM87 is not set
++# CONFIG_SENSORS_LM90 is not set
++# CONFIG_SENSORS_LM92 is not set
++# CONFIG_SENSORS_LM93 is not set
++# CONFIG_SENSORS_LTC4215 is not set
++# CONFIG_SENSORS_LTC4245 is not set
++# CONFIG_SENSORS_LM95241 is not set
++# CONFIG_SENSORS_MAX1111 is not set
++# CONFIG_SENSORS_MAX1619 is not set
++# CONFIG_SENSORS_MAX6650 is not set
++# CONFIG_SENSORS_PC87360 is not set
++# CONFIG_SENSORS_PC87427 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_SENSORS_SHT15 is not set
++# CONFIG_SENSORS_DME1737 is not set
++# CONFIG_SENSORS_SMSC47M1 is not set
++# CONFIG_SENSORS_SMSC47M192 is not set
++# CONFIG_SENSORS_SMSC47B397 is not set
++# CONFIG_SENSORS_ADS7828 is not set
++# CONFIG_SENSORS_THMC50 is not set
++# CONFIG_SENSORS_TMP401 is not set
++# CONFIG_SENSORS_TMP421 is not set
++# CONFIG_SENSORS_VT1211 is not set
++# CONFIG_SENSORS_W83781D is not set
++# CONFIG_SENSORS_W83791D is not set
++# CONFIG_SENSORS_W83792D is not set
++# CONFIG_SENSORS_W83793 is not set
++# CONFIG_SENSORS_W83L785TS is not set
++# CONFIG_SENSORS_W83L786NG is not set
++# CONFIG_SENSORS_W83627HF is not set
++# CONFIG_SENSORS_W83627EHF is not set
++# CONFIG_SENSORS_LIS3_SPI is not set
++CONFIG_THERMAL=y
++CONFIG_THERMAL_HWMON=y
++CONFIG_WATCHDOG=y
++CONFIG_WATCHDOG_NOWAYOUT=y
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_OMAP_WATCHDOG=y
++# CONFIG_TWL4030_WATCHDOG is not set
++
++#
++# USB-based Watchdog Cards
++#
++# CONFIG_USBPCWATCHDOG is not set
++CONFIG_SSB_POSSIBLE=y
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB=y
++CONFIG_SSB_SDIOHOST_POSSIBLE=y
++# CONFIG_SSB_SDIOHOST is not set
++# CONFIG_SSB_SILENT is not set
++# CONFIG_SSB_DEBUG is not set
++
++#
++# Multifunction device drivers
++#
++CONFIG_MFD_CORE=y
++# CONFIG_MFD_SM501 is not set
++# CONFIG_MFD_ASIC3 is not set
++# CONFIG_HTC_EGPIO is not set
++# CONFIG_HTC_PASIC3 is not set
++# CONFIG_TPS65010 is not set
++CONFIG_TWL4030_CORE=y
++CONFIG_TWL4030_POWER=y
++CONFIG_TWL4030_CODEC=y
++# CONFIG_TWL4030_MADC is not set
++# CONFIG_MFD_TMIO is not set
++# CONFIG_MFD_T7L66XB is not set
++# CONFIG_MFD_TC6387XB is not set
++# CONFIG_MFD_TC6393XB is not set
++# CONFIG_PMIC_DA903X is not set
++# CONFIG_PMIC_ADP5520 is not set
++# CONFIG_MFD_WM8400 is not set
++# CONFIG_MFD_WM831X is not set
++# CONFIG_MFD_WM8350_I2C is not set
++# CONFIG_MFD_PCF50633 is not set
++# CONFIG_MFD_MC13783 is not set
++# CONFIG_AB3100_CORE is not set
++# CONFIG_EZX_PCAP is not set
++# CONFIG_MFD_88PM8607 is not set
++# CONFIG_AB4500_CORE is not set
++CONFIG_REGULATOR=y
++# CONFIG_REGULATOR_DEBUG is not set
++# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
++# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
++# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
++# CONFIG_REGULATOR_BQ24022 is not set
++# CONFIG_REGULATOR_MAX1586 is not set
++CONFIG_REGULATOR_TWL4030=y
++# CONFIG_REGULATOR_LP3971 is not set
++# CONFIG_REGULATOR_TPS65023 is not set
++# CONFIG_REGULATOR_TPS6507X is not set
++CONFIG_MEDIA_SUPPORT=y
++
++#
++# Multimedia core support
++#
++CONFIG_VIDEO_DEV=y
++CONFIG_VIDEO_V4L2_COMMON=y
++CONFIG_VIDEO_ALLOW_V4L1=y
++CONFIG_VIDEO_V4L1_COMPAT=y
++CONFIG_DVB_CORE=m
++CONFIG_VIDEO_MEDIA=m
++
++#
++# Multimedia drivers
++#
++CONFIG_MEDIA_ATTACH=y
++CONFIG_MEDIA_TUNER=m
++CONFIG_MEDIA_TUNER_CUSTOMISE=y
++CONFIG_MEDIA_TUNER_SIMPLE=m
++CONFIG_MEDIA_TUNER_TDA8290=m
++CONFIG_MEDIA_TUNER_TDA827X=m
++CONFIG_MEDIA_TUNER_TDA18271=m
++CONFIG_MEDIA_TUNER_TDA9887=m
++CONFIG_MEDIA_TUNER_TEA5761=m
++CONFIG_MEDIA_TUNER_TEA5767=m
++CONFIG_MEDIA_TUNER_MT20XX=m
++CONFIG_MEDIA_TUNER_MT2060=m
++CONFIG_MEDIA_TUNER_MT2266=m
++CONFIG_MEDIA_TUNER_MT2131=m
++CONFIG_MEDIA_TUNER_QT1010=m
++CONFIG_MEDIA_TUNER_XC2028=m
++CONFIG_MEDIA_TUNER_XC5000=m
++CONFIG_MEDIA_TUNER_MXL5005S=m
++CONFIG_MEDIA_TUNER_MXL5007T=m
++CONFIG_MEDIA_TUNER_MC44S803=m
++CONFIG_MEDIA_TUNER_MAX2165=m
++CONFIG_VIDEO_V4L2=y
++CONFIG_VIDEO_V4L1=y
++CONFIG_VIDEOBUF_GEN=y
++CONFIG_VIDEOBUF_DMA_SG=y
++CONFIG_VIDEOBUF_VMALLOC=m
++CONFIG_VIDEOBUF_DMA_CONTIG=y
++CONFIG_VIDEOBUF_DVB=m
++CONFIG_VIDEO_IR=m
++CONFIG_VIDEO_TVEEPROM=m
++CONFIG_VIDEO_TUNER=m
++CONFIG_VIDEO_CAPTURE_DRIVERS=y
++# CONFIG_VIDEO_ADV_DEBUG is not set
++# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
++# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
++CONFIG_VIDEO_IR_I2C=m
++
++#
++# Encoders/decoders and other helper chips
++#
++
++#
++# Audio decoders
++#
++# CONFIG_VIDEO_TVAUDIO is not set
++# CONFIG_VIDEO_TDA7432 is not set
++# CONFIG_VIDEO_TDA9840 is not set
++# CONFIG_VIDEO_TDA9875 is not set
++# CONFIG_VIDEO_TEA6415C is not set
++# CONFIG_VIDEO_TEA6420 is not set
++CONFIG_VIDEO_MSP3400=m
++# CONFIG_VIDEO_CS5345 is not set
++CONFIG_VIDEO_CS53L32A=m
++# CONFIG_VIDEO_M52790 is not set
++# CONFIG_VIDEO_TLV320AIC23B is not set
++CONFIG_VIDEO_WM8775=m
++# CONFIG_VIDEO_WM8739 is not set
++# CONFIG_VIDEO_VP27SMPX is not set
++
++#
++# RDS decoders
++#
++# CONFIG_VIDEO_SAA6588 is not set
++
++#
++# Video decoders
++#
++# CONFIG_VIDEO_ADV7180 is not set
++# CONFIG_VIDEO_BT819 is not set
++# CONFIG_VIDEO_BT856 is not set
++# CONFIG_VIDEO_BT866 is not set
++# CONFIG_VIDEO_KS0127 is not set
++# CONFIG_VIDEO_OV7670 is not set
++CONFIG_VIDEO_MT9V011=m
++# CONFIG_VIDEO_TCM825X is not set
++CONFIG_VIDEO_MT9P012=m
++CONFIG_VIDEO_MT9T111=y
++# CONFIG_VIDEO_DW9710 is not set
++# CONFIG_VIDEO_OV3640 is not set
++# CONFIG_VIDEO_IMX046 is not set
++# CONFIG_VIDEO_LV8093 is not set
++# CONFIG_VIDEO_SAA7110 is not set
++CONFIG_VIDEO_SAA711X=m
++# CONFIG_VIDEO_SAA717X is not set
++# CONFIG_VIDEO_SAA7191 is not set
++# CONFIG_VIDEO_TVP514X is not set
++# CONFIG_VIDEO_TVP5150 is not set
++# CONFIG_VIDEO_VPX3220 is not set
++
++#
++# Video and audio decoders
++#
++CONFIG_VIDEO_CX25840=m
++
++#
++# MPEG video encoders
++#
++CONFIG_VIDEO_CX2341X=m
++
++#
++# Video encoders
++#
++# CONFIG_VIDEO_SAA7127 is not set
++# CONFIG_VIDEO_SAA7185 is not set
++# CONFIG_VIDEO_ADV7170 is not set
++# CONFIG_VIDEO_ADV7175 is not set
++# CONFIG_VIDEO_THS7303 is not set
++# CONFIG_VIDEO_ADV7343 is not set
++
++#
++# Video improvement chips
++#
++# CONFIG_VIDEO_UPD64031A is not set
++# CONFIG_VIDEO_UPD64083 is not set
++CONFIG_VIDEO_VIVI=m
++# CONFIG_VIDEO_CPIA is not set
++# CONFIG_VIDEO_CPIA2 is not set
++# CONFIG_VIDEO_SAA5246A is not set
++# CONFIG_VIDEO_SAA5249 is not set
++# CONFIG_VIDEO_AU0828 is not set
++CONFIG_TI_MEDIA=y
++CONFIG_VIDEO_VPSS_SYSTEM=y
++CONFIG_VIDEO_VPFE_CAPTURE=y
++# CONFIG_VIDEO_DM6446_CCDC is not set
++# CONFIG_VIDEO_DM355_CCDC is not set
++CONFIG_VIDEO_OMAP2_VOUT=y
++CONFIG_VIDEO_OMAP3=y
++CONFIG_VIDEO_OMAP3_ISP=y
++CONFIG_VIDEO_OMAP34XX_ISP_PREVIEWER=y
++CONFIG_VIDEO_OMAP34XX_ISP_RESIZER=y
++# CONFIG_SOC_CAMERA is not set
++CONFIG_V4L_USB_DRIVERS=y
++CONFIG_USB_VIDEO_CLASS=m
++CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
++CONFIG_USB_GSPCA=m
++CONFIG_USB_M5602=m
++CONFIG_USB_STV06XX=m
++# CONFIG_USB_GL860 is not set
++CONFIG_USB_GSPCA_CONEX=m
++CONFIG_USB_GSPCA_ETOMS=m
++CONFIG_USB_GSPCA_FINEPIX=m
++# CONFIG_USB_GSPCA_JEILINJ is not set
++CONFIG_USB_GSPCA_MARS=m
++# CONFIG_USB_GSPCA_MR97310A is not set
++CONFIG_USB_GSPCA_OV519=m
++CONFIG_USB_GSPCA_OV534=m
++CONFIG_USB_GSPCA_PAC207=m
++# CONFIG_USB_GSPCA_PAC7302 is not set
++CONFIG_USB_GSPCA_PAC7311=m
++# CONFIG_USB_GSPCA_SN9C20X is not set
++CONFIG_USB_GSPCA_SONIXB=m
++CONFIG_USB_GSPCA_SONIXJ=m
++CONFIG_USB_GSPCA_SPCA500=m
++CONFIG_USB_GSPCA_SPCA501=m
++CONFIG_USB_GSPCA_SPCA505=m
++CONFIG_USB_GSPCA_SPCA506=m
++CONFIG_USB_GSPCA_SPCA508=m
++CONFIG_USB_GSPCA_SPCA561=m
++# CONFIG_USB_GSPCA_SQ905 is not set
++# CONFIG_USB_GSPCA_SQ905C is not set
++CONFIG_USB_GSPCA_STK014=m
++# CONFIG_USB_GSPCA_STV0680 is not set
++CONFIG_USB_GSPCA_SUNPLUS=m
++CONFIG_USB_GSPCA_T613=m
++CONFIG_USB_GSPCA_TV8532=m
++CONFIG_USB_GSPCA_VC032X=m
++CONFIG_USB_GSPCA_ZC3XX=m
++CONFIG_VIDEO_PVRUSB2=m
++CONFIG_VIDEO_PVRUSB2_SYSFS=y
++CONFIG_VIDEO_PVRUSB2_DVB=y
++# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
++CONFIG_VIDEO_HDPVR=m
++CONFIG_VIDEO_EM28XX=m
++CONFIG_VIDEO_EM28XX_ALSA=m
++CONFIG_VIDEO_EM28XX_DVB=m
++CONFIG_VIDEO_CX231XX=m
++# CONFIG_VIDEO_CX231XX_ALSA is not set
++CONFIG_VIDEO_CX231XX_DVB=m
++CONFIG_VIDEO_USBVISION=m
++CONFIG_VIDEO_USBVIDEO=m
++CONFIG_USB_VICAM=m
++CONFIG_USB_IBMCAM=m
++CONFIG_USB_KONICAWC=m
++CONFIG_USB_QUICKCAM_MESSENGER=m
++CONFIG_USB_ET61X251=m
++CONFIG_VIDEO_OVCAMCHIP=m
++CONFIG_USB_W9968CF=m
++CONFIG_USB_OV511=m
++CONFIG_USB_SE401=m
++CONFIG_USB_SN9C102=m
++CONFIG_USB_STV680=m
++CONFIG_USB_ZC0301=m
++CONFIG_USB_PWC=m
++# CONFIG_USB_PWC_DEBUG is not set
++CONFIG_USB_PWC_INPUT_EVDEV=y
++CONFIG_USB_ZR364XX=m
++CONFIG_USB_STKWEBCAM=m
++CONFIG_USB_S2255=m
++CONFIG_RADIO_ADAPTERS=y
++# CONFIG_I2C_SI4713 is not set
++# CONFIG_RADIO_SI4713 is not set
++# CONFIG_USB_DSBR is not set
++# CONFIG_RADIO_SI470X is not set
++# CONFIG_USB_MR800 is not set
++# CONFIG_RADIO_TEA5764 is not set
++# CONFIG_RADIO_TEF6862 is not set
++CONFIG_DVB_MAX_ADAPTERS=8
++CONFIG_DVB_DYNAMIC_MINORS=y
++CONFIG_DVB_CAPTURE_DRIVERS=y
++# CONFIG_TTPCI_EEPROM is not set
++
++#
++# Supported USB Adapters
++#
++CONFIG_DVB_USB=m
++# CONFIG_DVB_USB_DEBUG is not set
++CONFIG_DVB_USB_A800=m
++CONFIG_DVB_USB_DIBUSB_MB=m
++# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
++CONFIG_DVB_USB_DIBUSB_MC=m
++CONFIG_DVB_USB_DIB0700=m
++CONFIG_DVB_USB_UMT_010=m
++CONFIG_DVB_USB_CXUSB=m
++CONFIG_DVB_USB_M920X=m
++CONFIG_DVB_USB_GL861=m
++CONFIG_DVB_USB_AU6610=m
++CONFIG_DVB_USB_DIGITV=m
++CONFIG_DVB_USB_VP7045=m
++CONFIG_DVB_USB_VP702X=m
++CONFIG_DVB_USB_GP8PSK=m
++CONFIG_DVB_USB_NOVA_T_USB2=m
++CONFIG_DVB_USB_TTUSB2=m
++CONFIG_DVB_USB_DTT200U=m
++CONFIG_DVB_USB_OPERA1=m
++CONFIG_DVB_USB_AF9005=m
++CONFIG_DVB_USB_AF9005_REMOTE=m
++CONFIG_DVB_USB_DW2102=m
++CONFIG_DVB_USB_CINERGY_T2=m
++CONFIG_DVB_USB_ANYSEE=m
++CONFIG_DVB_USB_DTV5100=m
++CONFIG_DVB_USB_AF9015=m
++# CONFIG_DVB_USB_CE6230 is not set
++# CONFIG_DVB_USB_FRIIO is not set
++# CONFIG_DVB_USB_EC168 is not set
++# CONFIG_SMS_SIANO_MDTV is not set
++
++#
++# Supported FlexCopII (B2C2) Adapters
++#
++CONFIG_DVB_B2C2_FLEXCOP=m
++CONFIG_DVB_B2C2_FLEXCOP_USB=m
++# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
++
++#
++# Supported DVB Frontends
++#
++# CONFIG_DVB_FE_CUSTOMISE is not set
++CONFIG_DVB_CX24123=m
++CONFIG_DVB_MT312=m
++CONFIG_DVB_ZL10039=m
++CONFIG_DVB_S5H1420=m
++CONFIG_DVB_STV0288=m
++CONFIG_DVB_STB6000=m
++CONFIG_DVB_STV0299=m
++CONFIG_DVB_TDA10086=m
++CONFIG_DVB_TUNER_ITD1000=m
++CONFIG_DVB_TUNER_CX24113=m
++CONFIG_DVB_TDA826X=m
++CONFIG_DVB_CX24116=m
++CONFIG_DVB_SI21XX=m
++CONFIG_DVB_CX22702=m
++CONFIG_DVB_TDA1004X=m
++CONFIG_DVB_NXT6000=m
++CONFIG_DVB_MT352=m
++CONFIG_DVB_ZL10353=m
++CONFIG_DVB_DIB3000MB=m
++CONFIG_DVB_DIB3000MC=m
++CONFIG_DVB_DIB7000M=m
++CONFIG_DVB_DIB7000P=m
++CONFIG_DVB_TDA10048=m
++CONFIG_DVB_AF9013=m
++CONFIG_DVB_TDA10021=m
++CONFIG_DVB_TDA10023=m
++CONFIG_DVB_STV0297=m
++CONFIG_DVB_NXT200X=m
++CONFIG_DVB_BCM3510=m
++CONFIG_DVB_LGDT330X=m
++CONFIG_DVB_LGDT3305=m
++CONFIG_DVB_S5H1409=m
++CONFIG_DVB_S5H1411=m
++CONFIG_DVB_DIB8000=m
++CONFIG_DVB_PLL=m
++CONFIG_DVB_TUNER_DIB0070=m
++CONFIG_DVB_LNBP21=m
++CONFIG_DVB_ISL6421=m
++CONFIG_DVB_LGS8GL5=m
++# CONFIG_DAB is not set
++
++#
++# Graphics support
++#
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++# CONFIG_FB_BOOT_VESA_SUPPORT is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_FOREIGN_ENDIAN is not set
++# CONFIG_FB_SYS_FOPS is not set
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++CONFIG_FB_MODE_HELPERS=y
++# CONFIG_FB_TILEBLITTING is not set
++
++#
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_S1D13XXX is not set
++# CONFIG_FB_TMIO is not set
++# CONFIG_FB_VIRTUAL is not set
++# CONFIG_FB_METRONOME is not set
++# CONFIG_FB_MB862XX is not set
++# CONFIG_FB_BROADSHEET is not set
++# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
++CONFIG_OMAP2_VRAM=y
++CONFIG_OMAP2_VRFB=y
++CONFIG_OMAP2_DSS=y
++CONFIG_OMAP2_VRAM_SIZE=14
++CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
++# CONFIG_OMAP2_DSS_RFBI is not set
++CONFIG_OMAP2_DSS_VENC=y
++CONFIG_OMAP2_VENC_OUT_TYPE_SVIDEO=y
++# CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE is not set
++# CONFIG_OMAP2_DSS_SDI is not set
++CONFIG_OMAP2_DSS_DSI=y
++CONFIG_OMAP2_DSS_USE_DSI_PLL=y
++# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
++CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
++CONFIG_FB_OMAP2=y
++CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
++# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
++CONFIG_FB_OMAP2_NUM_FBS=3
++
++#
++# OMAP2/3 Display Device Drivers
++#
++CONFIG_PANEL_GENERIC=y
++# CONFIG_PANEL_LGPHILIPS_LB035Q02 is not set
++# CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C is not set
++CONFIG_PANEL_SHARP_LS037V7DW01=y
++# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set
++# CONFIG_PANEL_TAAL is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++CONFIG_DISPLAY_SUPPORT=y
++
++#
++# Display hardware drivers
++#
++
++#
++# Console display driver support
++#
++# CONFIG_VGA_CONSOLE is not set
++CONFIG_DUMMY_CONSOLE=y
++CONFIG_FRAMEBUFFER_CONSOLE=y
++# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
++CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
++# CONFIG_FONTS is not set
++CONFIG_FONT_8x8=y
++CONFIG_FONT_8x16=y
++CONFIG_LOGO=y
++# CONFIG_LOGO_LINUX_MONO is not set
++# CONFIG_LOGO_LINUX_VGA16 is not set
++CONFIG_LOGO_LINUX_CLUT224=y
++CONFIG_SOUND=y
++CONFIG_SOUND_OSS_CORE=y
++CONFIG_SOUND_OSS_CORE_PRECLAIM=y
++CONFIG_SND=y
++CONFIG_SND_TIMER=y
++CONFIG_SND_PCM=y
++CONFIG_SND_HWDEP=y
++CONFIG_SND_RAWMIDI=y
++CONFIG_SND_JACK=y
++CONFIG_SND_SEQUENCER=m
++# CONFIG_SND_SEQ_DUMMY is not set
++CONFIG_SND_OSSEMUL=y
++CONFIG_SND_MIXER_OSS=y
++CONFIG_SND_PCM_OSS=y
++CONFIG_SND_PCM_OSS_PLUGINS=y
++CONFIG_SND_SEQUENCER_OSS=y
++CONFIG_SND_HRTIMER=m
++CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
++# CONFIG_SND_DYNAMIC_MINORS is not set
++CONFIG_SND_SUPPORT_OLD_API=y
++CONFIG_SND_VERBOSE_PROCFS=y
++# CONFIG_SND_VERBOSE_PRINTK is not set
++# CONFIG_SND_DEBUG is not set
++CONFIG_SND_RAWMIDI_SEQ=m
++# CONFIG_SND_OPL3_LIB_SEQ is not set
++# CONFIG_SND_OPL4_LIB_SEQ is not set
++# CONFIG_SND_SBAWE_SEQ is not set
++# CONFIG_SND_EMU10K1_SEQ is not set
++CONFIG_SND_DRIVERS=y
++# CONFIG_SND_DUMMY is not set
++# CONFIG_SND_VIRMIDI is not set
++# CONFIG_SND_MTPAV is not set
++# CONFIG_SND_SERIAL_U16550 is not set
++# CONFIG_SND_MPU401 is not set
++# CONFIG_SND_ARM is not set
++CONFIG_SND_SPI=y
++CONFIG_SND_USB=y
++CONFIG_SND_USB_AUDIO=y
++CONFIG_SND_USB_CAIAQ=m
++CONFIG_SND_USB_CAIAQ_INPUT=y
++CONFIG_SND_SOC=y
++CONFIG_SND_OMAP_SOC=y
++CONFIG_SND_OMAP_SOC_MCBSP=y
++# CONFIG_SND_OMAP_SOC_OMAP3EVM is not set
++CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE=y
++CONFIG_SND_SOC_I2C_AND_SPI=y
++# CONFIG_SND_SOC_ALL_CODECS is not set
++CONFIG_SND_SOC_TWL4030=y
++# CONFIG_SOUND_PRIME is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HIDRAW is not set
++
++#
++# USB Input Devices
++#
++CONFIG_USB_HID=y
++# CONFIG_HID_PID is not set
++# CONFIG_USB_HIDDEV is not set
++
++#
++# Special HID drivers
++#
++CONFIG_HID_A4TECH=y
++CONFIG_HID_APPLE=y
++CONFIG_HID_BELKIN=y
++CONFIG_HID_CHERRY=y
++CONFIG_HID_CHICONY=y
++CONFIG_HID_CYPRESS=y
++# CONFIG_HID_DRAGONRISE is not set
++CONFIG_HID_EZKEY=y
++# CONFIG_HID_KYE is not set
++CONFIG_HID_GYRATION=y
++# CONFIG_HID_TWINHAN is not set
++# CONFIG_HID_KENSINGTON is not set
++CONFIG_HID_LOGITECH=y
++# CONFIG_LOGITECH_FF is not set
++# CONFIG_LOGIRUMBLEPAD2_FF is not set
++CONFIG_HID_MICROSOFT=y
++CONFIG_HID_MONTEREY=y
++CONFIG_HID_NTRIG=y
++CONFIG_HID_PANTHERLORD=y
++# CONFIG_PANTHERLORD_FF is not set
++CONFIG_HID_PETALYNX=y
++CONFIG_HID_SAMSUNG=y
++CONFIG_HID_SONY=y
++CONFIG_HID_SUNPLUS=y
++# CONFIG_HID_GREENASIA is not set
++# CONFIG_HID_SMARTJOYPLUS is not set
++CONFIG_HID_TOPSEED=y
++# CONFIG_HID_THRUSTMASTER is not set
++# CONFIG_HID_WACOM is not set
++# CONFIG_HID_ZEROPLUS is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++CONFIG_USB=y
++# CONFIG_USB_DEBUG is not set
++CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
++
++#
++# Miscellaneous USB options
++#
++CONFIG_USB_DEVICEFS=y
++CONFIG_USB_DEVICE_CLASS=y
++# CONFIG_USB_DYNAMIC_MINORS is not set
++CONFIG_USB_SUSPEND=y
++CONFIG_USB_OTG=y
++# CONFIG_USB_OTG_WHITELIST is not set
++# CONFIG_USB_OTG_BLACKLIST_HUB is not set
++CONFIG_USB_MON=y
++# CONFIG_USB_WUSB is not set
++# CONFIG_USB_WUSB_CBAF is not set
++
++#
++# USB Host Controller Drivers
++#
++# CONFIG_USB_C67X00_HCD is not set
++CONFIG_USB_EHCI_HCD=y
++# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
++CONFIG_USB_EHCI_TT_NEWSCHED=y
++# CONFIG_USB_OXU210HP_HCD is not set
++# CONFIG_USB_ISP116X_HCD is not set
++# CONFIG_USB_ISP1760_HCD is not set
++# CONFIG_USB_ISP1362_HCD is not set
++# CONFIG_USB_OHCI_HCD is not set
++# CONFIG_USB_U132_HCD is not set
++# CONFIG_USB_SL811_HCD is not set
++# CONFIG_USB_R8A66597_HCD is not set
++# CONFIG_USB_HWA_HCD is not set
++CONFIG_USB_MUSB_HDRC=y
++CONFIG_USB_MUSB_SOC=y
++
++#
++# OMAP 343x high speed USB support
++#
++# CONFIG_USB_MUSB_HOST is not set
++# CONFIG_USB_MUSB_PERIPHERAL is not set
++CONFIG_USB_MUSB_OTG=y
++CONFIG_USB_GADGET_MUSB_HDRC=y
++CONFIG_USB_MUSB_HDRC_HCD=y
++# CONFIG_MUSB_PIO_ONLY is not set
++CONFIG_USB_INVENTRA_DMA=y
++CONFIG_MUSB_USE_SYSTEM_DMA_RX=y
++# CONFIG_USB_TI_CPPI_DMA is not set
++# CONFIG_USB_TI_CPPI41_DMA is not set
++# CONFIG_USB_MUSB_DEBUG is not set
++
++#
++# USB Device Class drivers
++#
++CONFIG_USB_ACM=m
++CONFIG_USB_PRINTER=m
++CONFIG_USB_WDM=m
++CONFIG_USB_TMC=m
++
++#
++# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
++#
++
++#
++# also be needed; see USB_STORAGE Help for more info
++#
++CONFIG_USB_STORAGE=y
++# CONFIG_USB_STORAGE_DEBUG is not set
++# CONFIG_USB_STORAGE_DATAFAB is not set
++# CONFIG_USB_STORAGE_FREECOM is not set
++# CONFIG_USB_STORAGE_ISD200 is not set
++# CONFIG_USB_STORAGE_USBAT is not set
++# CONFIG_USB_STORAGE_SDDR09 is not set
++# CONFIG_USB_STORAGE_SDDR55 is not set
++# CONFIG_USB_STORAGE_JUMPSHOT is not set
++# CONFIG_USB_STORAGE_ALAUDA is not set
++# CONFIG_USB_STORAGE_ONETOUCH is not set
++# CONFIG_USB_STORAGE_KARMA is not set
++# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
++# CONFIG_USB_LIBUSUAL is not set
++
++#
++# USB Imaging devices
++#
++# CONFIG_USB_MDC800 is not set
++# CONFIG_USB_MICROTEK is not set
++
++#
++# USB port drivers
++#
++CONFIG_USB_SERIAL=m
++CONFIG_USB_EZUSB=y
++CONFIG_USB_SERIAL_GENERIC=y
++CONFIG_USB_SERIAL_AIRCABLE=m
++CONFIG_USB_SERIAL_ARK3116=m
++CONFIG_USB_SERIAL_BELKIN=m
++CONFIG_USB_SERIAL_CH341=m
++CONFIG_USB_SERIAL_WHITEHEAT=m
++CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
++# CONFIG_USB_SERIAL_CP210X is not set
++CONFIG_USB_SERIAL_CYPRESS_M8=m
++CONFIG_USB_SERIAL_EMPEG=m
++CONFIG_USB_SERIAL_FTDI_SIO=m
++CONFIG_USB_SERIAL_FUNSOFT=m
++CONFIG_USB_SERIAL_VISOR=m
++CONFIG_USB_SERIAL_IPAQ=m
++CONFIG_USB_SERIAL_IR=m
++CONFIG_USB_SERIAL_EDGEPORT=m
++CONFIG_USB_SERIAL_EDGEPORT_TI=m
++CONFIG_USB_SERIAL_GARMIN=m
++CONFIG_USB_SERIAL_IPW=m
++CONFIG_USB_SERIAL_IUU=m
++CONFIG_USB_SERIAL_KEYSPAN_PDA=m
++CONFIG_USB_SERIAL_KEYSPAN=m
++CONFIG_USB_SERIAL_KEYSPAN_MPR=y
++CONFIG_USB_SERIAL_KEYSPAN_USA28=y
++CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
++CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
++CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
++CONFIG_USB_SERIAL_KEYSPAN_USA19=y
++CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
++CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
++CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
++CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
++CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
++CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
++CONFIG_USB_SERIAL_KLSI=m
++CONFIG_USB_SERIAL_KOBIL_SCT=m
++CONFIG_USB_SERIAL_MCT_U232=m
++CONFIG_USB_SERIAL_MOS7720=m
++CONFIG_USB_SERIAL_MOS7840=m
++CONFIG_USB_SERIAL_MOTOROLA=m
++CONFIG_USB_SERIAL_NAVMAN=m
++CONFIG_USB_SERIAL_PL2303=m
++CONFIG_USB_SERIAL_OTI6858=m
++# CONFIG_USB_SERIAL_QUALCOMM is not set
++CONFIG_USB_SERIAL_SPCP8X5=m
++CONFIG_USB_SERIAL_HP4X=m
++CONFIG_USB_SERIAL_SAFE=m
++# CONFIG_USB_SERIAL_SAFE_PADDED is not set
++CONFIG_USB_SERIAL_SIEMENS_MPI=m
++CONFIG_USB_SERIAL_SIERRAWIRELESS=m
++# CONFIG_USB_SERIAL_SYMBOL is not set
++CONFIG_USB_SERIAL_TI=m
++CONFIG_USB_SERIAL_CYBERJACK=m
++CONFIG_USB_SERIAL_XIRCOM=m
++CONFIG_USB_SERIAL_OPTION=m
++CONFIG_USB_SERIAL_OMNINET=m
++CONFIG_USB_SERIAL_OPTICON=m
++CONFIG_USB_SERIAL_DEBUG=m
++
++#
++# USB Miscellaneous drivers
++#
++CONFIG_USB_EMI62=m
++CONFIG_USB_EMI26=m
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_SEVSEG is not set
++# CONFIG_USB_RIO500 is not set
++CONFIG_USB_LEGOTOWER=m
++CONFIG_USB_LCD=m
++CONFIG_USB_BERRY_CHARGE=m
++CONFIG_USB_LED=m
++CONFIG_USB_CYPRESS_CY7C63=m
++CONFIG_USB_CYTHERM=m
++CONFIG_USB_IDMOUSE=m
++CONFIG_USB_FTDI_ELAN=m
++# CONFIG_USB_APPLEDISPLAY is not set
++CONFIG_USB_SISUSBVGA=m
++CONFIG_USB_SISUSBVGA_CON=y
++CONFIG_USB_LD=m
++CONFIG_USB_TRANCEVIBRATOR=m
++# CONFIG_USB_IOWARRIOR is not set
++CONFIG_USB_TEST=m
++# CONFIG_USB_ISIGHTFW is not set
++CONFIG_USB_VST=m
++CONFIG_USB_ATM=m
++CONFIG_USB_SPEEDTOUCH=m
++CONFIG_USB_CXACRU=m
++CONFIG_USB_UEAGLEATM=m
++CONFIG_USB_XUSBATM=m
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_DEBUG_FS=y
++CONFIG_USB_GADGET_VBUS_DRAW=2
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_ATMEL_USBA is not set
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_PXA25X is not set
++# CONFIG_USB_GADGET_R8A66597 is not set
++# CONFIG_USB_GADGET_PXA27X is not set
++# CONFIG_USB_GADGET_S3C_HSOTG is not set
++# CONFIG_USB_GADGET_IMX is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++# CONFIG_USB_GADGET_FSL_QE is not set
++# CONFIG_USB_GADGET_CI13XXX is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LANGWELL is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++CONFIG_USB_ZERO=m
++CONFIG_USB_ZERO_HNPTEST=y
++# CONFIG_USB_AUDIO is not set
++CONFIG_USB_ETH=m
++CONFIG_USB_ETH_RNDIS=y
++# CONFIG_USB_ETH_EEM is not set
++CONFIG_USB_GADGETFS=m
++CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++# CONFIG_USB_MASS_STORAGE is not set
++CONFIG_USB_G_SERIAL=m
++CONFIG_USB_MIDI_GADGET=m
++CONFIG_USB_G_PRINTER=m
++CONFIG_USB_CDC_COMPOSITE=m
++# CONFIG_USB_G_MULTI is not set
++
++#
++# OTG and related infrastructure
++#
++CONFIG_USB_OTG_UTILS=y
++CONFIG_USB_GPIO_VBUS=y
++# CONFIG_ISP1301_OMAP is not set
++# CONFIG_USB_ULPI is not set
++CONFIG_TWL4030_USB=y
++CONFIG_NOP_USB_XCEIV=y
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++CONFIG_MMC_UNSAFE_RESUME=y
++
++#
++# MMC/SD/SDIO Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++CONFIG_MMC_BLOCK_BOUNCE=y
++CONFIG_SDIO_UART=y
++# CONFIG_MMC_TEST is not set
++
++#
++# MMC/SD/SDIO Host Controller Drivers
++#
++# CONFIG_MMC_SDHCI is not set
++# CONFIG_MMC_OMAP is not set
++CONFIG_MMC_OMAP_HS=y
++# CONFIG_MMC_AT91 is not set
++# CONFIG_MMC_ATMELMCI is not set
++CONFIG_MMC_SPI=m
++# CONFIG_MEMSTICK is not set
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=y
++
++#
++# LED drivers
++#
++# CONFIG_LEDS_PCA9532 is not set
++CONFIG_LEDS_GPIO=y
++CONFIG_LEDS_GPIO_PLATFORM=y
++# CONFIG_LEDS_LP3944 is not set
++# CONFIG_LEDS_PCA955X is not set
++# CONFIG_LEDS_DAC124S085 is not set
++# CONFIG_LEDS_BD2802 is not set
++
++#
++# LED Triggers
++#
++CONFIG_LEDS_TRIGGERS=y
++CONFIG_LEDS_TRIGGER_TIMER=m
++CONFIG_LEDS_TRIGGER_HEARTBEAT=y
++CONFIG_LEDS_TRIGGER_BACKLIGHT=m
++# CONFIG_LEDS_TRIGGER_GPIO is not set
++CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
++
++#
++# iptables trigger is under Netfilter config (LED target)
++#
++# CONFIG_ACCESSIBILITY is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=m
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++CONFIG_RTC_DRV_TWL4030=m
++# CONFIG_RTC_DRV_S35390A is not set
++# CONFIG_RTC_DRV_FM3130 is not set
++# CONFIG_RTC_DRV_RX8581 is not set
++# CONFIG_RTC_DRV_RX8025 is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_M41T94 is not set
++# CONFIG_RTC_DRV_DS1305 is not set
++# CONFIG_RTC_DRV_DS1390 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++# CONFIG_RTC_DRV_R9701 is not set
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_DS3234 is not set
++# CONFIG_RTC_DRV_PCF2123 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_CMOS is not set
++# CONFIG_RTC_DRV_DS1286 is not set
++# CONFIG_RTC_DRV_DS1511 is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T35 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_MSM6242 is not set
++# CONFIG_RTC_DRV_BQ4802 is not set
++# CONFIG_RTC_DRV_RP5C01 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++# CONFIG_DMADEVICES is not set
++# CONFIG_AUXDISPLAY is not set
++CONFIG_UIO=m
++CONFIG_UIO_PDRV=m
++CONFIG_UIO_PDRV_GENIRQ=m
++# CONFIG_UIO_SMX is not set
++# CONFIG_UIO_SERCOS3 is not set
++
++#
++# TI VLYNQ
++#
++CONFIG_STAGING=y
++# CONFIG_STAGING_EXCLUDE_BUILD is not set
++# CONFIG_USB_IP_COMMON is not set
++CONFIG_W35UND=m
++# CONFIG_PRISM2_USB is not set
++CONFIG_ECHO=m
++CONFIG_OTUS=m
++# CONFIG_COMEDI is not set
++# CONFIG_ASUS_OLED is not set
++# CONFIG_INPUT_MIMIO is not set
++# CONFIG_TRANZPORT is not set
++
++#
++# Qualcomm MSM Camera And Video
++#
++
++#
++# Camera Sensor Selection
++#
++# CONFIG_INPUT_GPIO is not set
++# CONFIG_DST is not set
++# CONFIG_POHMELFS is not set
++# CONFIG_PLAN9AUTH is not set
++# CONFIG_LINE6_USB is not set
++# CONFIG_USB_SERIAL_QUATECH2 is not set
++# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
++# CONFIG_VT6656 is not set
++# CONFIG_FB_UDL is not set
++
++#
++# RAR Register Driver
++#
++# CONFIG_RAR_REGISTER is not set
++# CONFIG_IIO is not set
++# CONFIG_RAMZSWAP is not set
++# CONFIG_BATMAN_ADV is not set
++# CONFIG_STRIP is not set
++
++#
++# CBUS support
++#
++# CONFIG_CBUS is not set
++
++#
++# File systems
++#
++CONFIG_FS_JOURNAL_INFO=y
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
++# CONFIG_EXT3_FS_XATTR is not set
++CONFIG_EXT4_FS=y
++CONFIG_EXT4_FS_XATTR=y
++# CONFIG_EXT4_FS_POSIX_ACL is not set
++# CONFIG_EXT4_FS_SECURITY is not set
++# CONFIG_EXT4_DEBUG is not set
++CONFIG_JBD=y
++# CONFIG_JBD_DEBUG is not set
++CONFIG_JBD2=y
++# CONFIG_JBD2_DEBUG is not set
++CONFIG_FS_MBCACHE=y
++CONFIG_REISERFS_FS=m
++# CONFIG_REISERFS_CHECK is not set
++CONFIG_REISERFS_PROC_INFO=y
++CONFIG_REISERFS_FS_XATTR=y
++# CONFIG_REISERFS_FS_POSIX_ACL is not set
++# CONFIG_REISERFS_FS_SECURITY is not set
++CONFIG_JFS_FS=m
++# CONFIG_JFS_POSIX_ACL is not set
++# CONFIG_JFS_SECURITY is not set
++# CONFIG_JFS_DEBUG is not set
++# CONFIG_JFS_STATISTICS is not set
++CONFIG_FS_POSIX_ACL=y
++CONFIG_XFS_FS=m
++# CONFIG_XFS_QUOTA is not set
++# CONFIG_XFS_POSIX_ACL is not set
++# CONFIG_XFS_RT is not set
++# CONFIG_XFS_DEBUG is not set
++CONFIG_GFS2_FS=m
++# CONFIG_GFS2_FS_LOCKING_DLM is not set
++CONFIG_OCFS2_FS=m
++CONFIG_OCFS2_FS_O2CB=m
++CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
++CONFIG_OCFS2_FS_STATS=y
++CONFIG_OCFS2_DEBUG_MASKLOG=y
++# CONFIG_OCFS2_DEBUG_FS is not set
++# CONFIG_OCFS2_FS_POSIX_ACL is not set
++CONFIG_BTRFS_FS=m
++# CONFIG_BTRFS_FS_POSIX_ACL is not set
++# CONFIG_NILFS2_FS is not set
++CONFIG_FILE_LOCKING=y
++CONFIG_FSNOTIFY=y
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++CONFIG_QUOTA=y
++# CONFIG_QUOTA_NETLINK_INTERFACE is not set
++CONFIG_PRINT_QUOTA_WARNING=y
++CONFIG_QUOTA_TREE=y
++# CONFIG_QFMT_V1 is not set
++CONFIG_QFMT_V2=y
++CONFIG_QUOTACTL=y
++# CONFIG_AUTOFS_FS is not set
++CONFIG_AUTOFS4_FS=m
++CONFIG_FUSE_FS=m
++# CONFIG_CUSE is not set
++CONFIG_GENERIC_ACL=y
++
++#
++# Caches
++#
++# CONFIG_FSCACHE is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++CONFIG_ISO9660_FS=m
++CONFIG_JOLIET=y
++CONFIG_ZISOFS=y
++CONFIG_UDF_FS=m
++CONFIG_UDF_NLS=y
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=y
++CONFIG_MSDOS_FS=y
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++CONFIG_NTFS_FS=m
++# CONFIG_NTFS_DEBUG is not set
++CONFIG_NTFS_RW=y
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++CONFIG_TMPFS_POSIX_ACL=y
++# CONFIG_HUGETLB_PAGE is not set
++CONFIG_CONFIGFS_FS=m
++CONFIG_MISC_FILESYSTEMS=y
++CONFIG_ADFS_FS=m
++# CONFIG_ADFS_FS_RW is not set
++CONFIG_AFFS_FS=m
++# CONFIG_ECRYPT_FS is not set
++CONFIG_HFS_FS=m
++CONFIG_HFSPLUS_FS=m
++CONFIG_BEFS_FS=m
++# CONFIG_BEFS_DEBUG is not set
++CONFIG_BFS_FS=m
++CONFIG_EFS_FS=m
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
++CONFIG_JFFS2_SUMMARY=y
++CONFIG_JFFS2_FS_XATTR=y
++CONFIG_JFFS2_FS_POSIX_ACL=y
++CONFIG_JFFS2_FS_SECURITY=y
++CONFIG_JFFS2_COMPRESSION_OPTIONS=y
++CONFIG_JFFS2_ZLIB=y
++CONFIG_JFFS2_LZO=y
++CONFIG_JFFS2_RTIME=y
++CONFIG_JFFS2_RUBIN=y
++# CONFIG_JFFS2_CMODE_NONE is not set
++# CONFIG_JFFS2_CMODE_PRIORITY is not set
++# CONFIG_JFFS2_CMODE_SIZE is not set
++CONFIG_JFFS2_CMODE_FAVOURLZO=y
++CONFIG_UBIFS_FS=y
++CONFIG_UBIFS_FS_XATTR=y
++CONFIG_UBIFS_FS_ADVANCED_COMPR=y
++CONFIG_UBIFS_FS_LZO=y
++CONFIG_UBIFS_FS_ZLIB=y
++# CONFIG_UBIFS_FS_DEBUG is not set
++CONFIG_CRAMFS=m
++CONFIG_SQUASHFS=y
++# CONFIG_SQUASHFS_EMBEDDED is not set
++CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
++CONFIG_VXFS_FS=m
++CONFIG_MINIX_FS=m
++CONFIG_OMFS_FS=m
++CONFIG_HPFS_FS=m
++CONFIG_QNX4FS_FS=m
++CONFIG_ROMFS_FS=m
++CONFIG_ROMFS_BACKED_BY_BLOCK=y
++# CONFIG_ROMFS_BACKED_BY_MTD is not set
++# CONFIG_ROMFS_BACKED_BY_BOTH is not set
++CONFIG_ROMFS_ON_BLOCK=y
++CONFIG_SYSV_FS=m
++CONFIG_UFS_FS=m
++# CONFIG_UFS_FS_WRITE is not set
++# CONFIG_UFS_DEBUG is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++CONFIG_NFS_V4=y
++# CONFIG_NFS_V4_1 is not set
++CONFIG_ROOT_NFS=y
++CONFIG_NFSD=m
++CONFIG_NFSD_V2_ACL=y
++CONFIG_NFSD_V3=y
++CONFIG_NFSD_V3_ACL=y
++CONFIG_NFSD_V4=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_EXPORTFS=m
++CONFIG_NFS_ACL_SUPPORT=m
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++CONFIG_SUNRPC_GSS=y
++CONFIG_RPCSEC_GSS_KRB5=y
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++CONFIG_SMB_FS=m
++# CONFIG_SMB_NLS_DEFAULT is not set
++CONFIG_CIFS=m
++CONFIG_CIFS_STATS=y
++CONFIG_CIFS_STATS2=y
++# CONFIG_CIFS_WEAK_PW_HASH is not set
++# CONFIG_CIFS_UPCALL is not set
++# CONFIG_CIFS_XATTR is not set
++# CONFIG_CIFS_DEBUG2 is not set
++# CONFIG_CIFS_DFS_UPCALL is not set
++CONFIG_CIFS_EXPERIMENTAL=y
++CONFIG_NCP_FS=m
++# CONFIG_NCPFS_PACKET_SIGNING is not set
++# CONFIG_NCPFS_IOCTL_LOCKING is not set
++# CONFIG_NCPFS_STRONG is not set
++# CONFIG_NCPFS_NFS_NS is not set
++# CONFIG_NCPFS_OS2_NS is not set
++# CONFIG_NCPFS_SMALLDOS is not set
++# CONFIG_NCPFS_NLS is not set
++# CONFIG_NCPFS_EXTRAS is not set
++CONFIG_CODA_FS=m
++CONFIG_AFS_FS=m
++# CONFIG_AFS_DEBUG is not set
++CONFIG_9P_FS=m
++
++#
++# Partition Types
++#
++CONFIG_PARTITION_ADVANCED=y
++# CONFIG_ACORN_PARTITION is not set
++# CONFIG_OSF_PARTITION is not set
++# CONFIG_AMIGA_PARTITION is not set
++# CONFIG_ATARI_PARTITION is not set
++CONFIG_MAC_PARTITION=y
++CONFIG_MSDOS_PARTITION=y
++CONFIG_BSD_DISKLABEL=y
++CONFIG_MINIX_SUBPARTITION=y
++CONFIG_SOLARIS_X86_PARTITION=y
++# CONFIG_UNIXWARE_DISKLABEL is not set
++CONFIG_LDM_PARTITION=y
++CONFIG_LDM_DEBUG=y
++# CONFIG_SGI_PARTITION is not set
++# CONFIG_ULTRIX_PARTITION is not set
++# CONFIG_SUN_PARTITION is not set
++# CONFIG_KARMA_PARTITION is not set
++CONFIG_EFI_PARTITION=y
++# CONFIG_SYSV68_PARTITION is not set
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=y
++CONFIG_NLS_CODEPAGE_737=m
++CONFIG_NLS_CODEPAGE_775=m
++CONFIG_NLS_CODEPAGE_850=m
++CONFIG_NLS_CODEPAGE_852=m
++CONFIG_NLS_CODEPAGE_855=m
++CONFIG_NLS_CODEPAGE_857=m
++CONFIG_NLS_CODEPAGE_860=m
++CONFIG_NLS_CODEPAGE_861=m
++CONFIG_NLS_CODEPAGE_862=m
++CONFIG_NLS_CODEPAGE_863=m
++CONFIG_NLS_CODEPAGE_864=m
++CONFIG_NLS_CODEPAGE_865=m
++CONFIG_NLS_CODEPAGE_866=m
++CONFIG_NLS_CODEPAGE_869=m
++CONFIG_NLS_CODEPAGE_936=m
++CONFIG_NLS_CODEPAGE_950=m
++CONFIG_NLS_CODEPAGE_932=m
++CONFIG_NLS_CODEPAGE_949=m
++CONFIG_NLS_CODEPAGE_874=m
++CONFIG_NLS_ISO8859_8=m
++CONFIG_NLS_CODEPAGE_1250=m
++CONFIG_NLS_CODEPAGE_1251=m
++CONFIG_NLS_ASCII=m
++CONFIG_NLS_ISO8859_1=y
++CONFIG_NLS_ISO8859_2=m
++CONFIG_NLS_ISO8859_3=m
++CONFIG_NLS_ISO8859_4=m
++CONFIG_NLS_ISO8859_5=m
++CONFIG_NLS_ISO8859_6=m
++CONFIG_NLS_ISO8859_7=m
++CONFIG_NLS_ISO8859_9=m
++CONFIG_NLS_ISO8859_13=m
++CONFIG_NLS_ISO8859_14=m
++CONFIG_NLS_ISO8859_15=m
++CONFIG_NLS_KOI8_R=m
++CONFIG_NLS_KOI8_U=m
++CONFIG_NLS_UTF8=y
++CONFIG_DLM=m
++# CONFIG_DLM_DEBUG is not set
++
++#
++# Kernel hacking
++#
++CONFIG_PRINTK_TIME=y
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_FRAME_WARN=1024
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_STRIP_ASM_SYMS is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++CONFIG_DEBUG_FS=y
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
++CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
++CONFIG_DETECT_HUNG_TASK=y
++# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
++CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
++CONFIG_SCHED_DEBUG=y
++CONFIG_SCHEDSTATS=y
++CONFIG_TIMER_STATS=y
++# CONFIG_DEBUG_OBJECTS is not set
++# CONFIG_DEBUG_SLAB is not set
++# CONFIG_DEBUG_KMEMLEAK is not set
++CONFIG_DEBUG_PREEMPT=y
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++CONFIG_DEBUG_MUTEXES=y
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_LOCK_STAT is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++CONFIG_STACKTRACE=y
++# CONFIG_DEBUG_KOBJECT is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_WRITECOUNT is not set
++# CONFIG_DEBUG_MEMORY_INIT is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_DEBUG_NOTIFIERS is not set
++# CONFIG_DEBUG_CREDENTIALS is not set
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_RCU_CPU_STALL_DETECTOR is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
++# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_LATENCYTOP is not set
++# CONFIG_SYSCTL_SYSCALL_CHECK is not set
++# CONFIG_PAGE_POISONING is not set
++CONFIG_NOP_TRACER=y
++CONFIG_HAVE_FUNCTION_TRACER=y
++CONFIG_RING_BUFFER=y
++CONFIG_EVENT_TRACING=y
++CONFIG_CONTEXT_SWITCH_TRACER=y
++CONFIG_RING_BUFFER_ALLOW_SWAP=y
++CONFIG_TRACING=y
++CONFIG_TRACING_SUPPORT=y
++CONFIG_FTRACE=y
++# CONFIG_FUNCTION_TRACER is not set
++# CONFIG_IRQSOFF_TRACER is not set
++# CONFIG_PREEMPT_TRACER is not set
++# CONFIG_SCHED_TRACER is not set
++# CONFIG_ENABLE_DEFAULT_TRACERS is not set
++# CONFIG_BOOT_TRACER is not set
++CONFIG_BRANCH_PROFILE_NONE=y
++# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
++# CONFIG_PROFILE_ALL_BRANCHES is not set
++# CONFIG_STACK_TRACER is not set
++# CONFIG_KMEMTRACE is not set
++# CONFIG_WORKQUEUE_TRACER is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_RING_BUFFER_BENCHMARK is not set
++# CONFIG_DYNAMIC_DEBUG is not set
++# CONFIG_SAMPLES is not set
++CONFIG_HAVE_ARCH_KGDB=y
++# CONFIG_KGDB is not set
++CONFIG_ARM_UNWIND=y
++# CONFIG_DEBUG_USER is not set
++# CONFIG_DEBUG_ERRORS is not set
++# CONFIG_DEBUG_STACK_USAGE is not set
++# CONFIG_DEBUG_LL is not set
++# CONFIG_OC_ETM is not set
++
++#
++# Security options
++#
++CONFIG_KEYS=y
++# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITYFS is not set
++# CONFIG_DEFAULT_SECURITY_SELINUX is not set
++# CONFIG_DEFAULT_SECURITY_SMACK is not set
++# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
++CONFIG_DEFAULT_SECURITY_DAC=y
++CONFIG_DEFAULT_SECURITY=""
++CONFIG_XOR_BLOCKS=m
++CONFIG_ASYNC_CORE=m
++CONFIG_ASYNC_MEMCPY=m
++CONFIG_ASYNC_XOR=m
++CONFIG_ASYNC_PQ=m
++CONFIG_ASYNC_RAID6_RECOV=m
++CONFIG_CRYPTO=y
++
++#
++# Crypto core or helper
++#
++CONFIG_CRYPTO_FIPS=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_ALGAPI2=y
++CONFIG_CRYPTO_AEAD=m
++CONFIG_CRYPTO_AEAD2=y
++CONFIG_CRYPTO_BLKCIPHER=y
++CONFIG_CRYPTO_BLKCIPHER2=y
++CONFIG_CRYPTO_HASH=y
++CONFIG_CRYPTO_HASH2=y
++CONFIG_CRYPTO_RNG=m
++CONFIG_CRYPTO_RNG2=y
++CONFIG_CRYPTO_PCOMP=y
++CONFIG_CRYPTO_MANAGER=y
++CONFIG_CRYPTO_MANAGER2=y
++CONFIG_CRYPTO_GF128MUL=m
++CONFIG_CRYPTO_NULL=m
++CONFIG_CRYPTO_WORKQUEUE=y
++CONFIG_CRYPTO_CRYPTD=m
++CONFIG_CRYPTO_AUTHENC=m
++CONFIG_CRYPTO_TEST=m
++
++#
++# Authenticated Encryption with Associated Data
++#
++CONFIG_CRYPTO_CCM=m
++CONFIG_CRYPTO_GCM=m
++CONFIG_CRYPTO_SEQIV=m
++
++#
++# Block modes
++#
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_CTR=m
++CONFIG_CRYPTO_CTS=m
++CONFIG_CRYPTO_ECB=y
++CONFIG_CRYPTO_LRW=m
++CONFIG_CRYPTO_PCBC=m
++CONFIG_CRYPTO_XTS=m
++
++#
++# Hash modes
++#
++CONFIG_CRYPTO_HMAC=m
++CONFIG_CRYPTO_XCBC=m
++# CONFIG_CRYPTO_VMAC is not set
++
++#
++# Digest
++#
++CONFIG_CRYPTO_CRC32C=y
++CONFIG_CRYPTO_GHASH=m
++CONFIG_CRYPTO_MD4=m
++CONFIG_CRYPTO_MD5=y
++CONFIG_CRYPTO_MICHAEL_MIC=y
++CONFIG_CRYPTO_RMD128=m
++CONFIG_CRYPTO_RMD160=m
++CONFIG_CRYPTO_RMD256=m
++CONFIG_CRYPTO_RMD320=m
++CONFIG_CRYPTO_SHA1=m
++CONFIG_CRYPTO_SHA256=m
++CONFIG_CRYPTO_SHA512=m
++CONFIG_CRYPTO_TGR192=m
++CONFIG_CRYPTO_WP512=m
++
++#
++# Ciphers
++#
++CONFIG_CRYPTO_AES=y
++CONFIG_CRYPTO_ANUBIS=m
++CONFIG_CRYPTO_ARC4=y
++CONFIG_CRYPTO_BLOWFISH=m
++CONFIG_CRYPTO_CAMELLIA=m
++CONFIG_CRYPTO_CAST5=m
++CONFIG_CRYPTO_CAST6=m
++CONFIG_CRYPTO_DES=y
++CONFIG_CRYPTO_FCRYPT=m
++CONFIG_CRYPTO_KHAZAD=m
++CONFIG_CRYPTO_SALSA20=m
++CONFIG_CRYPTO_SEED=m
++CONFIG_CRYPTO_SERPENT=m
++CONFIG_CRYPTO_TEA=m
++CONFIG_CRYPTO_TWOFISH=m
++CONFIG_CRYPTO_TWOFISH_COMMON=m
++
++#
++# Compression
++#
++CONFIG_CRYPTO_DEFLATE=y
++# CONFIG_CRYPTO_ZLIB is not set
++CONFIG_CRYPTO_LZO=y
++
++#
++# Random Number Generation
++#
++CONFIG_CRYPTO_ANSI_CPRNG=m
++CONFIG_CRYPTO_HW=y
++CONFIG_BINARY_PRINTF=y
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++CONFIG_GENERIC_FIND_LAST_BIT=y
++CONFIG_CRC_CCITT=y
++CONFIG_CRC16=y
++CONFIG_CRC_T10DIF=y
++CONFIG_CRC_ITU_T=y
++CONFIG_CRC32=y
++CONFIG_CRC7=y
++CONFIG_LIBCRC32C=y
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_LZO_COMPRESS=y
++CONFIG_LZO_DECOMPRESS=y
++CONFIG_DECOMPRESS_GZIP=y
++CONFIG_TEXTSEARCH=y
++CONFIG_TEXTSEARCH_KMP=m
++CONFIG_TEXTSEARCH_BM=m
++CONFIG_TEXTSEARCH_FSM=m
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++CONFIG_NLATTR=y
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0006-omap3beagle-camera-Add-support-for-regulators.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0006-omap3beagle-camera-Add-support-for-regulators.patch
new file mode 100644
index 0000000..3a44521
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0006-omap3beagle-camera-Add-support-for-regulators.patch
@@ -0,0 +1,238 @@
+From 0f967d630fb4b3e55f202b91cbabbd631107923d Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Fri, 11 Jun 2010 16:50:39 -0500
+Subject: [PATCH 06/75] omap3beagle: camera: Add support for regulators
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ arch/arm/mach-omap2/board-omap3beagle-camera.c |   92 +++++++++++++++++++++---
+ arch/arm/mach-omap2/board-omap3beagle.c        |   53 ++++++++++++++
+ 2 files changed, 135 insertions(+), 10 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle-camera.c b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+index e93437f..af8581a 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle-camera.c
++++ b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+@@ -28,8 +28,9 @@
+ #include <linux/gpio.h>
+ #include <linux/mm.h>
+ #include <linux/videodev2.h>
+-#include <linux/i2c/twl.h>
++#include <linux/regulator/consumer.h>
+ #include <linux/delay.h>
++#include <linux/platform_device.h>
+ 
+ #include <plat/mux.h>
+ #include <plat/board.h>
+@@ -50,6 +51,11 @@
+ 
+ #define CAM_USE_XCLKA       1
+ 
++static struct regulator *beagle_mt9t111_reg1;
++static struct regulator *beagle_mt9t111_reg2;
++
++static struct device *beaglecam_dev;
++
+ #if defined(CONFIG_VIDEO_MT9T111) || defined(CONFIG_VIDEO_MT9T111_MODULE)
+ static struct isp_interface_config mt9t111_if_config = {
+ 	.ccdc_par_ser		= ISP_PARLL, 
+@@ -157,10 +163,13 @@ static int mt9t111_power_set(struct v4l2_int_device *s, enum v4l2_power power)
+ 
+ 	switch (power) {
+ 	case V4L2_POWER_OFF:
++	case V4L2_POWER_STANDBY:
+ 		isp_set_xclk(vdev->cam->isp, 0, CAM_USE_XCLKA);
+-		break;
+ 
+-	case V4L2_POWER_STANDBY:
++		if (regulator_is_enabled(beagle_mt9t111_reg1))
++			regulator_disable(beagle_mt9t111_reg1);
++		if (regulator_is_enabled(beagle_mt9t111_reg2))
++			regulator_disable(beagle_mt9t111_reg2);
+ 		break;
+ 
+ 	case V4L2_POWER_ON:
+@@ -169,6 +178,12 @@ static int mt9t111_power_set(struct v4l2_int_device *s, enum v4l2_power power)
+ #if defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE)
+ 		isp_configure_interface(vdev->cam->isp, &mt9t111_if_config);
+ #endif
++
++		/* turn on analog power */
++		regulator_enable(beagle_mt9t111_reg1);
++		regulator_enable(beagle_mt9t111_reg2);
++		udelay(100);
++
+ 		break;
+ 
+ 	default:
+@@ -196,16 +211,22 @@ static struct i2c_board_info __initdata mt9t111_i2c_board_info = {
+ 
+ #endif				/* #ifdef CONFIG_VIDEO_MT9T111 */
+ 
+-/**
+- * @brief omap3beaglelmb_init - module init function. Should be called before any
+- *                          client driver init call
+- *
+- * @return result of operation - 0 is success
+- */
+-int __init omap3beaglelmb_init(void)
++
++static int beagle_cam_probe(struct platform_device *pdev)
+ {
+ 	int err;
+ 
++	beagle_mt9t111_reg1 = regulator_get(beaglecam_dev, "vaux3_1");
++	if (IS_ERR(beagle_mt9t111_reg1)) {
++		dev_err(beaglecam_dev, "vaux3_1 regulator missing\n");
++		return PTR_ERR(beagle_mt9t111_reg1);
++	}
++	beagle_mt9t111_reg2 = regulator_get(beaglecam_dev, "vaux4_1");
++	if (IS_ERR(beagle_mt9t111_reg2)) {
++		dev_err(beaglecam_dev, "vaux4_1 regulator missing\n");
++		regulator_put(beagle_mt9t111_reg1);
++		return PTR_ERR(beagle_mt9t111_reg2);
++	}
+ 	/*
+ 	 * Register the I2C devices present in the board to the I2C
+ 	 * framework.
+@@ -221,8 +242,59 @@ int __init omap3beaglelmb_init(void)
+ 		return err;
+ 	}
+ #endif
++
++	beaglecam_dev = &pdev->dev;
++
+ 	printk(KERN_INFO MODULE_NAME ": Driver registration complete \n");
+ 
+ 	return 0;
+ }
++
++static int beagle_cam_remove(struct platform_device *pdev)
++{
++	if (regulator_is_enabled(beagle_mt9t111_reg1))
++		regulator_disable(beagle_mt9t111_reg1);
++	regulator_put(beagle_mt9t111_reg1);
++	if (regulator_is_enabled(beagle_mt9t111_reg2))
++		regulator_disable(beagle_mt9t111_reg2);
++	regulator_put(beagle_mt9t111_reg2);
++
++	return 0;
++}
++
++static int beagle_cam_suspend(struct device *dev)
++{
++	return 0;
++}
++
++static int beagle_cam_resume(struct device *dev)
++{
++	return 0;
++}
++
++static struct dev_pm_ops beagle_cam_pm_ops = {
++	.suspend = beagle_cam_suspend,
++	.resume  = beagle_cam_resume,
++};
++
++static struct platform_driver beagle_cam_driver = {
++	.probe		= beagle_cam_probe,
++	.remove		= beagle_cam_remove,
++	.driver		= {
++		.name	= "beagle_cam",
++		.pm	= &beagle_cam_pm_ops,
++	},
++};
++
++/**
++ * @brief omap3beaglelmb_init - module init function. Should be called before any
++ *                          client driver init call
++ *
++ * @return result of operation - 0 is success
++ */
++int __init omap3beaglelmb_init(void)
++{
++	platform_driver_register(&beagle_cam_driver);
++	return 0;
++}
+ arch_initcall(omap3beaglelmb_init);
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index 31de2f9..448ab23 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -403,6 +403,56 @@ static struct twl4030_gpio_platform_data beagle_gpio_data = {
+ 	.setup		= beagle_twl_gpio_setup,
+ };
+ 
++
++static struct platform_device beagle_cam_device = {
++	.name		= "beagle_cam",
++	.id		= -1,
++};
++
++static struct regulator_consumer_supply beagle_vaux3_supplies[] = {
++	{
++		.supply		= "vaux3_1",
++		.dev		= &beagle_cam_device.dev,
++	},
++};
++
++static struct regulator_consumer_supply beagle_vaux4_supplies[] = {
++	{
++		.supply		= "vaux4_1",
++		.dev		= &beagle_cam_device.dev,
++	},
++};
++
++/* VAUX3 for CAM_1V8 */
++static struct regulator_init_data beagle_vaux3 = {
++	.constraints = {
++		.min_uV			= 1800000,
++		.max_uV			= 1800000,
++		.apply_uV		= true,
++		.valid_modes_mask	= REGULATOR_MODE_NORMAL
++					| REGULATOR_MODE_STANDBY,
++		.valid_ops_mask		= REGULATOR_CHANGE_MODE
++					| REGULATOR_CHANGE_STATUS,
++	},
++	.num_consumer_supplies	= ARRAY_SIZE(beagle_vaux3_supplies),
++	.consumer_supplies	= beagle_vaux3_supplies,
++};
++
++/* VAUX4 for CAM_2V8 */
++static struct regulator_init_data beagle_vaux4 = {
++	.constraints = {
++		.min_uV			= 2800000,
++		.max_uV			= 2800000,
++		.apply_uV		= true,
++		.valid_modes_mask	= REGULATOR_MODE_NORMAL
++					| REGULATOR_MODE_STANDBY,
++		.valid_ops_mask		= REGULATOR_CHANGE_MODE
++					| REGULATOR_CHANGE_STATUS,
++	},
++	.num_consumer_supplies	= ARRAY_SIZE(beagle_vaux4_supplies),
++	.consumer_supplies	= beagle_vaux4_supplies,
++};
++
+ /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+ static struct regulator_init_data beagle_vmmc1 = {
+ 	.constraints = {
+@@ -492,6 +542,8 @@ static struct twl4030_platform_data beagle_twldata = {
+ 	.vsim		= &beagle_vsim,
+ 	.vdac		= &beagle_vdac,
+ 	.vpll2		= &beagle_vpll2,
++	.vaux3		= &beagle_vaux3,
++	.vaux4		= &beagle_vaux4,
+ };
+ 
+ static struct i2c_board_info __initdata beagle_i2c1_boardinfo[] = {
+@@ -658,6 +710,7 @@ static struct platform_device *omap3_beagle_devices[] __initdata = {
+ 	&leds_gpio,
+ 	&keys_gpio,
+ 	&beagle_dss_device,
++	&beagle_cam_device,
+ };
+ 
+ static void __init omap3beagle_flash_init(void)
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0007-TEMP-omap3beagle-cam-Enable-OMAP_MUX.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0007-TEMP-omap3beagle-cam-Enable-OMAP_MUX.patch
new file mode 100644
index 0000000..232835d9d
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0007-TEMP-omap3beagle-cam-Enable-OMAP_MUX.patch
@@ -0,0 +1,37 @@
+From 4b111d4e4f4050db9fcca746f9b8a893d3d60f98 Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Fri, 11 Jun 2010 16:52:25 -0500
+Subject: [PATCH 07/75] TEMP: omap3beagle: cam: Enable OMAP_MUX
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ arch/arm/configs/omap3_beagle_cam_defconfig |    6 ++++--
+ 1 files changed, 4 insertions(+), 2 deletions(-)
+
+diff --git a/arch/arm/configs/omap3_beagle_cam_defconfig b/arch/arm/configs/omap3_beagle_cam_defconfig
+index 0ea8300..bcd9418 100644
+--- a/arch/arm/configs/omap3_beagle_cam_defconfig
++++ b/arch/arm/configs/omap3_beagle_cam_defconfig
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+ # Linux kernel version: 2.6.32
+-# Fri Jun 11 14:25:23 2010
++# Fri Jun 11 16:51:42 2010
+ #
+ CONFIG_ARM=y
+ CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+@@ -240,7 +240,9 @@ CONFIG_ARCH_OMAP3=y
+ CONFIG_OMAP_SMARTREFLEX=y
+ # CONFIG_OMAP_SMARTREFLEX_TESTING is not set
+ CONFIG_OMAP_RESET_CLOCKS=y
+-# CONFIG_OMAP_MUX is not set
++CONFIG_OMAP_MUX=y
++# CONFIG_OMAP_MUX_DEBUG is not set
++CONFIG_OMAP_MUX_WARNINGS=y
+ CONFIG_OMAP_MCBSP=y
+ CONFIG_OMAP_MBOX_FWK=m
+ CONFIG_OMAP_IOMMU=y
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0008-omap3beagle-camera-Fix-null-pointer-dereference.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0008-omap3beagle-camera-Fix-null-pointer-dereference.patch
new file mode 100644
index 0000000..2232f94
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0008-omap3beagle-camera-Fix-null-pointer-dereference.patch
@@ -0,0 +1,54 @@
+From e5dc69cd15b96c2ffc5807a4127a94a32c9b4242 Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Fri, 11 Jun 2010 17:53:50 -0500
+Subject: [PATCH 08/75] omap3beagle: camera: Fix null pointer dereference
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ arch/arm/mach-omap2/board-omap3beagle-camera.c |   12 ++++--------
+ 1 files changed, 4 insertions(+), 8 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle-camera.c b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+index af8581a..20174a7 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle-camera.c
++++ b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+@@ -54,8 +54,6 @@
+ static struct regulator *beagle_mt9t111_reg1;
+ static struct regulator *beagle_mt9t111_reg2;
+ 
+-static struct device *beaglecam_dev;
+-
+ #if defined(CONFIG_VIDEO_MT9T111) || defined(CONFIG_VIDEO_MT9T111_MODULE)
+ static struct isp_interface_config mt9t111_if_config = {
+ 	.ccdc_par_ser		= ISP_PARLL, 
+@@ -216,14 +214,14 @@ static int beagle_cam_probe(struct platform_device *pdev)
+ {
+ 	int err;
+ 
+-	beagle_mt9t111_reg1 = regulator_get(beaglecam_dev, "vaux3_1");
++	beagle_mt9t111_reg1 = regulator_get(&pdev->dev, "vaux3_1");
+ 	if (IS_ERR(beagle_mt9t111_reg1)) {
+-		dev_err(beaglecam_dev, "vaux3_1 regulator missing\n");
++		dev_err(&pdev->dev, "vaux3_1 regulator missing\n");
+ 		return PTR_ERR(beagle_mt9t111_reg1);
+ 	}
+-	beagle_mt9t111_reg2 = regulator_get(beaglecam_dev, "vaux4_1");
++	beagle_mt9t111_reg2 = regulator_get(&pdev->dev, "vaux4_1");
+ 	if (IS_ERR(beagle_mt9t111_reg2)) {
+-		dev_err(beaglecam_dev, "vaux4_1 regulator missing\n");
++		dev_err(&pdev->dev, "vaux4_1 regulator missing\n");
+ 		regulator_put(beagle_mt9t111_reg1);
+ 		return PTR_ERR(beagle_mt9t111_reg2);
+ 	}
+@@ -243,8 +241,6 @@ static int beagle_cam_probe(struct platform_device *pdev)
+ 	}
+ #endif
+ 
+-	beaglecam_dev = &pdev->dev;
+-
+ 	printk(KERN_INFO MODULE_NAME ": Driver registration complete \n");
+ 
+ 	return 0;
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0009-Revert-TEMP-omap3beagle-cam-Enable-OMAP_MUX.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0009-Revert-TEMP-omap3beagle-cam-Enable-OMAP_MUX.patch
new file mode 100644
index 0000000..4bdf466
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0009-Revert-TEMP-omap3beagle-cam-Enable-OMAP_MUX.patch
@@ -0,0 +1,42 @@
+From 0c7579c682c3eb3dc5190e1b28743be0b33571e3 Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Wed, 16 Jun 2010 03:23:57 +0300
+Subject: [PATCH 09/75] Revert "TEMP: omap3beagle: cam: Enable OMAP_MUX"
+
+This reverts commit 7d5f49845f06feadb9bc97d458d1ce03814ff5f4.
+
+Reason?
+
+Kernel panic on MMC partition mount, so probably muxing is broken
+somewhere.
+---
+ arch/arm/configs/omap3_beagle_cam_defconfig |    6 ++----
+ 1 files changed, 2 insertions(+), 4 deletions(-)
+
+diff --git a/arch/arm/configs/omap3_beagle_cam_defconfig b/arch/arm/configs/omap3_beagle_cam_defconfig
+index bcd9418..0ea8300 100644
+--- a/arch/arm/configs/omap3_beagle_cam_defconfig
++++ b/arch/arm/configs/omap3_beagle_cam_defconfig
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+ # Linux kernel version: 2.6.32
+-# Fri Jun 11 16:51:42 2010
++# Fri Jun 11 14:25:23 2010
+ #
+ CONFIG_ARM=y
+ CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+@@ -240,9 +240,7 @@ CONFIG_ARCH_OMAP3=y
+ CONFIG_OMAP_SMARTREFLEX=y
+ # CONFIG_OMAP_SMARTREFLEX_TESTING is not set
+ CONFIG_OMAP_RESET_CLOCKS=y
+-CONFIG_OMAP_MUX=y
+-# CONFIG_OMAP_MUX_DEBUG is not set
+-CONFIG_OMAP_MUX_WARNINGS=y
++# CONFIG_OMAP_MUX is not set
+ CONFIG_OMAP_MCBSP=y
+ CONFIG_OMAP_MBOX_FWK=m
+ CONFIG_OMAP_IOMMU=y
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0010-omap3beagle-camera-Change-arch-late_initcall.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0010-omap3beagle-camera-Change-arch-late_initcall.patch
new file mode 100644
index 0000000..9854403
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0010-omap3beagle-camera-Change-arch-late_initcall.patch
@@ -0,0 +1,25 @@
+From d14c2924e8bb7d9a864dfeb0aca37ef9fc913f7d Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Wed, 16 Jun 2010 04:28:06 +0300
+Subject: [PATCH 10/75] omap3beagle: camera: Change arch -> late_initcall
+
+This is for ensuring that the regulators are initialized already.
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ arch/arm/mach-omap2/board-omap3beagle-camera.c |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle-camera.c b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+index 20174a7..55a113c 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle-camera.c
++++ b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+@@ -293,4 +293,4 @@ int __init omap3beaglelmb_init(void)
+ 	platform_driver_register(&beagle_cam_driver);
+ 	return 0;
+ }
+-arch_initcall(omap3beaglelmb_init);
++late_initcall(omap3beaglelmb_init);
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0011-omap3beagle-camera-Move-i2c-registration-to-the-main.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0011-omap3beagle-camera-Move-i2c-registration-to-the-main.patch
new file mode 100644
index 0000000..c61ad08
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0011-omap3beagle-camera-Move-i2c-registration-to-the-main.patch
@@ -0,0 +1,107 @@
+From 527c026c03e34471e34a731322422eacbb30fb35 Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Wed, 16 Jun 2010 04:58:46 +0300
+Subject: [PATCH 11/75] omap3beagle: camera: Move i2c registration to the main board
+
+This is because the board-omap3beagle-camera.c file now is
+late_initcall, and the i2c bus registration needed to be before
+i2c host init.
+
+So, in order to have the i2c init, meanwhile having late_initcall,
+this is so far the best solution.
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ arch/arm/mach-omap2/board-omap3beagle-camera.c |   24 +-----------------------
+ arch/arm/mach-omap2/board-omap3beagle.c        |   12 +++++++++++-
+ 2 files changed, 12 insertions(+), 24 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle-camera.c b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+index 55a113c..1652f15 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle-camera.c
++++ b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+@@ -47,8 +47,6 @@
+ 
+ #define MODULE_NAME			"omap3beaglelmb"
+ 
+-#define MT9T111_I2C_BUSNUM	(2)
+-
+ #define CAM_USE_XCLKA       1
+ 
+ static struct regulator *beagle_mt9t111_reg1;
+@@ -191,7 +189,7 @@ static int mt9t111_power_set(struct v4l2_int_device *s, enum v4l2_power power)
+ 	return 0;
+ }
+ 
+-static struct mt9t111_platform_data mt9t111_pdata = {
++struct mt9t111_platform_data mt9t111_pdata = {
+ 	.master		= "omap34xxcam",
+ 	.power_set	= mt9t111_power_set,
+ 	.priv_data_set	= mt9t111_set_prv_data,
+@@ -202,11 +200,6 @@ static struct mt9t111_platform_data mt9t111_pdata = {
+ 	.vs_polarity	= 1, /* 0 - Active low, 1- Active high */
+ };
+ 
+-static struct i2c_board_info __initdata mt9t111_i2c_board_info = {
+-	I2C_BOARD_INFO("mt9t111", MT9T111_I2C_ADDR),
+-	.platform_data	= &mt9t111_pdata,
+-};
+-
+ #endif				/* #ifdef CONFIG_VIDEO_MT9T111 */
+ 
+ 
+@@ -225,21 +218,6 @@ static int beagle_cam_probe(struct platform_device *pdev)
+ 		regulator_put(beagle_mt9t111_reg1);
+ 		return PTR_ERR(beagle_mt9t111_reg2);
+ 	}
+-	/*
+-	 * Register the I2C devices present in the board to the I2C
+-	 * framework.
+-	 * If more I2C devices are added, then each device information should
+-	 * be registered with I2C using i2c_register_board_info().
+-	 */
+-#if defined(CONFIG_VIDEO_MT9T111) || defined(CONFIG_VIDEO_MT9T111_MODULE)
+-	err = i2c_register_board_info(MT9T111_I2C_BUSNUM,
+-					&mt9t111_i2c_board_info, 1);
+-	if (err) {
+-		printk(KERN_ERR MODULE_NAME \
+-				": MT9T111 I2C Board Registration failed \n");
+-		return err;
+-	}
+-#endif
+ 
+ 	printk(KERN_INFO MODULE_NAME ": Driver registration complete \n");
+ 
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index 448ab23..97ccf04 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -71,6 +71,11 @@ static struct omap_opp * _omap35x_l3_rate_table         = NULL;
+ static struct omap_opp * _omap37x_l3_rate_table         = NULL;
+ #endif  /* CONFIG_PM */
+ 
++#ifdef CONFIG_VIDEO_MT9T111
++#include <media/v4l2-int-device.h>
++#include <media/mt9t111.h>
++extern struct mt9t111_platform_data mt9t111_pdata;
++#endif
+ 
+ #define GPMC_CS0_BASE  0x60
+ #define GPMC_CS_SIZE   0x30
+@@ -588,7 +593,12 @@ static struct i2c_board_info __initdata beagle_zippy_i2c2_boardinfo[] = {
+ static struct i2c_board_info __initdata beagle_zippy_i2c2_boardinfo[] = {};
+ #endif
+ 
+-static struct i2c_board_info __initdata beagle_i2c2_boardinfo[] = {};
++static struct i2c_board_info __initdata beagle_i2c2_boardinfo[] = {
++	{
++		I2C_BOARD_INFO("mt9t111", MT9T111_I2C_ADDR),
++		.platform_data	= &mt9t111_pdata,
++	},
++};
+ 
+ static int __init omap3_beagle_i2c_init(void)
+ {
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0012-ARM-OMAP3-make-camera-code-build-if-MT9T111-is-built.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0012-ARM-OMAP3-make-camera-code-build-if-MT9T111-is-built.patch
new file mode 100644
index 0000000..e83b078
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0012-ARM-OMAP3-make-camera-code-build-if-MT9T111-is-built.patch
@@ -0,0 +1,38 @@
+From 860ff4be70242f2d2964e0d431d09231cbf6bfde Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@dominion.thruhere.net>
+Date: Wed, 16 Jun 2010 09:45:46 +0200
+Subject: [PATCH 12/75] ARM: OMAP3: make camera code build if MT9T111 is built as module or disabled
+
+---
+ arch/arm/mach-omap2/board-omap3beagle.c |    4 +++-
+ 1 files changed, 3 insertions(+), 1 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index 97ccf04..3d4b0bc 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -71,7 +71,7 @@ static struct omap_opp * _omap35x_l3_rate_table         = NULL;
+ static struct omap_opp * _omap37x_l3_rate_table         = NULL;
+ #endif  /* CONFIG_PM */
+ 
+-#ifdef CONFIG_VIDEO_MT9T111
++#if defined(CONFIG_VIDEO_MT9T111) || defined(CONFIG_VIDEO_MT9T111_MODULE)
+ #include <media/v4l2-int-device.h>
+ #include <media/mt9t111.h>
+ extern struct mt9t111_platform_data mt9t111_pdata;
+@@ -594,10 +594,12 @@ static struct i2c_board_info __initdata beagle_zippy_i2c2_boardinfo[] = {};
+ #endif
+ 
+ static struct i2c_board_info __initdata beagle_i2c2_boardinfo[] = {
++#if defined(CONFIG_VIDEO_MT9T111) || defined(CONFIG_VIDEO_MT9T111_MODULE)
+ 	{
+ 		I2C_BOARD_INFO("mt9t111", MT9T111_I2C_ADDR),
+ 		.platform_data	= &mt9t111_pdata,
+ 	},
++#endif
+ };
+ 
+ static int __init omap3_beagle_i2c_init(void)
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0013-DEBUG-omap3beagle-camera-Force-mode0-in-cam_xclka.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0013-DEBUG-omap3beagle-camera-Force-mode0-in-cam_xclka.patch
new file mode 100644
index 0000000..f2d6a25
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0013-DEBUG-omap3beagle-camera-Force-mode0-in-cam_xclka.patch
@@ -0,0 +1,41 @@
+From 1326478d7bdb80f9d7d791e54eeead48ece93bff Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Wed, 23 Jun 2010 15:03:24 -0500
+Subject: [PATCH 13/75] DEBUG: omap3beagle: camera: Force mode0 in cam_xclka
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ arch/arm/mach-omap2/board-omap3beagle-camera.c |    3 +++
+ 1 files changed, 3 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle-camera.c b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+index 1652f15..77f9469 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle-camera.c
++++ b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+@@ -34,6 +34,7 @@
+ 
+ #include <plat/mux.h>
+ #include <plat/board.h>
++#include <plat/control.h>
+ 
+ #include <media/v4l2-int-device.h>
+ #include <media/mt9t111.h>
+@@ -160,6 +161,7 @@ static int mt9t111_power_set(struct v4l2_int_device *s, enum v4l2_power power)
+ 	switch (power) {
+ 	case V4L2_POWER_OFF:
+ 	case V4L2_POWER_STANDBY:
++		omap_ctrl_writew(0x0, 0x110); /* Control XCLKA output mux */
+ 		isp_set_xclk(vdev->cam->isp, 0, CAM_USE_XCLKA);
+ 
+ 		if (regulator_is_enabled(beagle_mt9t111_reg1))
+@@ -169,6 +171,7 @@ static int mt9t111_power_set(struct v4l2_int_device *s, enum v4l2_power power)
+ 		break;
+ 
+ 	case V4L2_POWER_ON:
++		omap_ctrl_writew(0x0, 0x110); /* Control XCLKA output mux */
+ 		isp_set_xclk(vdev->cam->isp, MT9T111_CLK_MIN, CAM_USE_XCLKA);
+ 
+ #if defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE)
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0014-OMAP3-CLOCK-Add-capability-to-change-rate-of-dpll4_m.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0014-OMAP3-CLOCK-Add-capability-to-change-rate-of-dpll4_m.patch
new file mode 100644
index 0000000..c396856
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0014-OMAP3-CLOCK-Add-capability-to-change-rate-of-dpll4_m.patch
@@ -0,0 +1,33 @@
+From 484186abcf6d44cc690c73d68148edde8b0b365b Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Thu, 4 Feb 2010 18:12:37 -0600
+Subject: [PATCH 14/75] OMAP3: CLOCK: Add capability to change rate of dpll4_m5_ck_3630
+
+Add necessary clk_sel definitions to clock framework to allow changing
+dpll4_m5_ck_3630 rate.
+
+Based on patch by Tuukka Toivonen <tuukka.o.toivonen@nokia.com> with subject:
+
+	OMAP3: CLOCK: Add capability to change rate of dpll4_m5_ck
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ arch/arm/mach-omap2/clock34xx_data.c |    2 ++
+ 1 files changed, 2 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/clock34xx_data.c b/arch/arm/mach-omap2/clock34xx_data.c
+index 89e2f61..8d101ef 100644
+--- a/arch/arm/mach-omap2/clock34xx_data.c
++++ b/arch/arm/mach-omap2/clock34xx_data.c
+@@ -934,6 +934,8 @@ static struct clk dpll4_m5_ck_3630 __initdata = {
+ 	.clksel		= div32_dpll4_clksel,
+ 	.clkdm_name	= "dpll4_clkdm",
+ 	.recalc		= &omap2_clksel_recalc,
++	.set_rate	= &omap2_clksel_set_rate,
++	.round_rate	= &omap2_clksel_round_rate,
+ };
+ 
+ /* The PWRDN bit is apparently only available on 3430ES2 and above */
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0015-Revert-DEBUG-omap3beagle-camera-Force-mode0-in-cam_x.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0015-Revert-DEBUG-omap3beagle-camera-Force-mode0-in-cam_x.patch
new file mode 100644
index 0000000..a6a42a7
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0015-Revert-DEBUG-omap3beagle-camera-Force-mode0-in-cam_x.patch
@@ -0,0 +1,41 @@
+From 327cb4ef7120d00bcc6a725375f2eb6aa02de899 Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Thu, 24 Jun 2010 14:27:39 -0500
+Subject: [PATCH 15/75] Revert "DEBUG: omap3beagle: camera: Force mode0 in cam_xclka"
+
+This reverts commit 158e14b3d449dde2c6aa9f8cddb86fbbee2d2cd7.
+---
+ arch/arm/mach-omap2/board-omap3beagle-camera.c |    3 ---
+ 1 files changed, 0 insertions(+), 3 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle-camera.c b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+index 77f9469..1652f15 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle-camera.c
++++ b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+@@ -34,7 +34,6 @@
+ 
+ #include <plat/mux.h>
+ #include <plat/board.h>
+-#include <plat/control.h>
+ 
+ #include <media/v4l2-int-device.h>
+ #include <media/mt9t111.h>
+@@ -161,7 +160,6 @@ static int mt9t111_power_set(struct v4l2_int_device *s, enum v4l2_power power)
+ 	switch (power) {
+ 	case V4L2_POWER_OFF:
+ 	case V4L2_POWER_STANDBY:
+-		omap_ctrl_writew(0x0, 0x110); /* Control XCLKA output mux */
+ 		isp_set_xclk(vdev->cam->isp, 0, CAM_USE_XCLKA);
+ 
+ 		if (regulator_is_enabled(beagle_mt9t111_reg1))
+@@ -171,7 +169,6 @@ static int mt9t111_power_set(struct v4l2_int_device *s, enum v4l2_power power)
+ 		break;
+ 
+ 	case V4L2_POWER_ON:
+-		omap_ctrl_writew(0x0, 0x110); /* Control XCLKA output mux */
+ 		isp_set_xclk(vdev->cam->isp, MT9T111_CLK_MIN, CAM_USE_XCLKA);
+ 
+ #if defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE)
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0016-omap3beagle-camera-Fix-wrong-XCLKA-selection.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0016-omap3beagle-camera-Fix-wrong-XCLKA-selection.patch
new file mode 100644
index 0000000..f562273
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0016-omap3beagle-camera-Fix-wrong-XCLKA-selection.patch
@@ -0,0 +1,30 @@
+From eb9738897009bea572be12bfb812c9a5ad8ef293 Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Thu, 24 Jun 2010 17:31:49 -0500
+Subject: [PATCH 16/75] omap3beagle: camera: Fix wrong XCLKA selection
+
+The CAM_USE_XCLKA should have been 0 instead of 1.
+
+Otherwise it was activating XCLKB instead!
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ arch/arm/mach-omap2/board-omap3beagle-camera.c |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle-camera.c b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+index 1652f15..75c8345 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle-camera.c
++++ b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+@@ -47,7 +47,7 @@
+ 
+ #define MODULE_NAME			"omap3beaglelmb"
+ 
+-#define CAM_USE_XCLKA       1
++#define CAM_USE_XCLKA       0
+ 
+ static struct regulator *beagle_mt9t111_reg1;
+ static struct regulator *beagle_mt9t111_reg2;
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0017-omap3isp-set-CAM_MCLK-to-172.8-MHz-allows-exact-9.6-.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0017-omap3isp-set-CAM_MCLK-to-172.8-MHz-allows-exact-9.6-.patch
new file mode 100644
index 0000000..0582172
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0017-omap3isp-set-CAM_MCLK-to-172.8-MHz-allows-exact-9.6-.patch
@@ -0,0 +1,91 @@
+From 26b873e74231529962132d9d80c8921b584f6e84 Mon Sep 17 00:00:00 2001
+From: Tuukka Toivonen <tuukka.o.toivonen@nokia.com>
+Date: Thu, 2 Jul 2009 16:17:55 +0200
+Subject: [PATCH 17/75] omap3isp: set CAM_MCLK to 172.8 MHz, allows exact 9.6 MHz for camera xclka/b
+
+Camera cam_xclka and cam_xclkb clocks are generated by dividing
+CAM_MCLK with an integer. We want to use 9.6 MHz for cameras,
+so CAM_MCLK should be multiple of it. Otherwise the generated
+frequency is slightly off due to rounding.
+
+Signed-off-by: Tuukka Toivonen <tuukka.o.toivonen@nokia.com>
+---
+ drivers/media/video/isp/isp.c    |   14 ++++++++++++++
+ drivers/media/video/isp/isp.h    |    1 +
+ drivers/media/video/isp/ispreg.h |    2 +-
+ 3 files changed, 16 insertions(+), 1 deletions(-)
+
+diff --git a/drivers/media/video/isp/isp.c b/drivers/media/video/isp/isp.c
+index ceed870..9d46c01 100644
+--- a/drivers/media/video/isp/isp.c
++++ b/drivers/media/video/isp/isp.c
+@@ -2333,6 +2333,11 @@ static int isp_enable_clocks(struct device *dev)
+ 		dev_err(dev, "clk_enable cam_ick failed\n");
+ 		goto out_clk_enable_ick;
+ 	}
++	r = clk_set_rate(isp->dpll4_m5_ck, CM_CAM_MCLK_HZ/2);
++	if (r) {
++		dev_err(dev, "clk_set_rate for dpll4_m5_ck failed\n");
++		goto out_clk_enable_mclk;
++	}
+ 	r = clk_enable(isp->cam_mclk);
+ 	if (r) {
+ 		dev_err(dev, "clk_enable cam_mclk failed\n");
+@@ -2499,6 +2504,7 @@ static int isp_remove(struct platform_device *pdev)
+ 
+ 	clk_put(isp->cam_ick);
+ 	clk_put(isp->cam_mclk);
++	clk_put(isp->dpll4_m5_ck);
+ 	clk_put(isp->csi2_fck);
+ 	clk_put(isp->l3_ick);
+ 
+@@ -2674,6 +2680,12 @@ static int isp_probe(struct platform_device *pdev)
+ 		ret_err = PTR_ERR(isp->cam_mclk);
+ 		goto out_clk_get_mclk;
+ 	}
++	isp->dpll4_m5_ck = clk_get(&camera_dev, "dpll4_m5_ck");
++	if (IS_ERR(isp->dpll4_m5_ck)) {
++		dev_err(isp->dev, "clk_get dpll4_m5_ck failed\n");
++		ret_err = PTR_ERR(isp->dpll4_m5_ck);
++		goto out_clk_get_dpll4_m5_ck;
++	}
+ 	isp->csi2_fck = clk_get(&camera_dev, "csi2_96m_fck");
+ 	if (IS_ERR(isp->csi2_fck)) {
+ 		dev_err(isp->dev, "clk_get csi2_96m_fck failed\n");
+@@ -2734,6 +2746,8 @@ out_request_irq:
+ out_clk_get_l3_ick:
+ 	clk_put(isp->csi2_fck);
+ out_clk_get_csi2_fclk:
++	clk_put(isp->dpll4_m5_ck);
++out_clk_get_dpll4_m5_ck:
+ 	clk_put(isp->cam_mclk);
+ out_clk_get_mclk:
+ 	clk_put(isp->cam_ick);
+diff --git a/drivers/media/video/isp/isp.h b/drivers/media/video/isp/isp.h
+index dc85d61..6b100b6 100644
+--- a/drivers/media/video/isp/isp.h
++++ b/drivers/media/video/isp/isp.h
+@@ -414,6 +414,7 @@ struct isp_device {
+ 	int ref_count;
+ 	struct clk *cam_ick;
+ 	struct clk *cam_mclk;
++	struct clk *dpll4_m5_ck;
+ 	struct clk *csi2_fck;
+ 	struct clk *l3_ick;
+ 	struct isp_interface_config *config;
+diff --git a/drivers/media/video/isp/ispreg.h b/drivers/media/video/isp/ispreg.h
+index 676a33d..1240e0e 100644
+--- a/drivers/media/video/isp/ispreg.h
++++ b/drivers/media/video/isp/ispreg.h
+@@ -116,7 +116,7 @@
+ #define ISP_32B_BOUNDARY_BUF		0xFFFFFFE0
+ #define ISP_32B_BOUNDARY_OFFSET		0x0000FFE0
+ 
+-#define CM_CAM_MCLK_HZ			216000000
++#define CM_CAM_MCLK_HZ			172800000	/* Hz */
+ 
+ /* ISP Submodules offset */
+ 
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0018-Fix-Moved-MCLK-setting-to-the-board-file.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0018-Fix-Moved-MCLK-setting-to-the-board-file.patch
new file mode 100644
index 0000000..978ae22
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0018-Fix-Moved-MCLK-setting-to-the-board-file.patch
@@ -0,0 +1,209 @@
+From 1156c4406ff37b425c596804624ad6014006fcc1 Mon Sep 17 00:00:00 2001
+From: Penda, Naveen <pnaveen@ti.com>
+Date: Thu, 22 Oct 2009 06:07:01 +0530
+Subject: [PATCH 18/75] Fix: Moved MCLK setting to the board file
+
+This patch provides the flexibility to set  the MCLK frequency
+ from the board file
+
+Signed-off-by: Naveen Penda <pnaveen@ti.com>
+Signed-off-by: Curran, Dominic <dcurran@ti.com>
+---
+ arch/arm/mach-omap2/board-zoom2-camera.c |   10 ++++++
+ drivers/media/video/isp/isp.c            |   51 +++++++++++++++++++----------
+ drivers/media/video/isp/isp.h            |    6 +++
+ 3 files changed, 49 insertions(+), 18 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-zoom2-camera.c b/arch/arm/mach-omap2/board-zoom2-camera.c
+index 1ba2982..8c035c4 100644
+--- a/arch/arm/mach-omap2/board-zoom2-camera.c
++++ b/arch/arm/mach-omap2/board-zoom2-camera.c
+@@ -41,6 +41,8 @@ static struct device *zoom2cam_dev;
+ 
+ #define CAMZOOM2_USE_XCLKB  	1
+ 
++#define ISP_IMX046_MCLK		216000000
++
+ /* Sensor specific GPIO signals */
+ #define IMX046_RESET_GPIO  	98
+ #define IMX046_STANDBY_GPIO	58
+@@ -148,6 +150,7 @@ static struct isp_interface_config imx046_if_config = {
+ 	.shutter 		= 0x0,
+ 	.wenlog 		= ISPCCDC_CFG_WENLOG_AND,
+ 	.wait_hs_vs		= 2,
++	.cam_mclk		= ISP_IMX046_MCLK,
+ 	.u.csi.crc 		= 0x0,
+ 	.u.csi.mode 		= 0x0,
+ 	.u.csi.edge 		= 0x0,
+@@ -264,6 +267,8 @@ static int imx046_sensor_power_set(struct v4l2_int_device *s, enum v4l2_power po
+ #ifdef CONFIG_OMAP_PM_SRF
+ 		omap_pm_set_min_bus_tput(vdev->cam->isp, OCP_INITIATOR_AGENT, 0);
+ #endif
++		if (previous_power != V4L2_POWER_OFF)
++			isp_disable_mclk(isp);
+ 		break;
+ 	case V4L2_POWER_STANDBY:
+ 		printk(KERN_DEBUG "imx046_sensor_power_set(STANDBY)\n");
+@@ -272,9 +277,14 @@ static int imx046_sensor_power_set(struct v4l2_int_device *s, enum v4l2_power po
+ #ifdef CONFIG_OMAP_PM_SRF
+ 		omap_pm_set_min_bus_tput(vdev->cam->isp, OCP_INITIATOR_AGENT, 0);
+ #endif
++
++
++		isp_disable_mclk(isp);
++
+ 		break;
+ 	}
+ 
++
+ 	/* Save powerstate to know what was before calling POWER_ON. */
+ 	previous_power = power;
+ 	return err;
+diff --git a/drivers/media/video/isp/isp.c b/drivers/media/video/isp/isp.c
+index 9d46c01..cf68720 100644
+--- a/drivers/media/video/isp/isp.c
++++ b/drivers/media/video/isp/isp.c
+@@ -552,7 +552,7 @@ EXPORT_SYMBOL(isp_unset_callback);
+  * Configures the specified MCLK divisor in the ISP timing control register
+  * (TCTRL_CTRL) to generate the desired xclk clock value.
+  *
+- * Divisor = CM_CAM_MCLK_HZ / xclk
++ * Divisor = mclk / xclk
+  *
+  * Returns the final frequency that is actually being generated
+  **/
+@@ -560,15 +560,16 @@ u32 isp_set_xclk(struct device *dev, u32 xclk, u8 xclksel)
+ {
+ 	u32 divisor;
+ 	u32 currentxclk;
++	struct isp_device *isp = dev_get_drvdata(dev);
+ 
+-	if (xclk >= CM_CAM_MCLK_HZ) {
++	if (xclk >= isp->mclk) {
+ 		divisor = ISPTCTRL_CTRL_DIV_BYPASS;
+-		currentxclk = CM_CAM_MCLK_HZ;
++		currentxclk = isp->mclk;
+ 	} else if (xclk >= 2) {
+-		divisor = CM_CAM_MCLK_HZ / xclk;
++		divisor = isp->mclk / xclk;
+ 		if (divisor >= ISPTCTRL_CTRL_DIV_BYPASS)
+ 			divisor = ISPTCTRL_CTRL_DIV_BYPASS - 1;
+-		currentxclk = CM_CAM_MCLK_HZ / divisor;
++		currentxclk = isp->mclk / divisor;
+ 	} else {
+ 		divisor = xclk;
+ 		currentxclk = 0;
+@@ -874,6 +875,8 @@ int isp_configure_interface(struct device *dev,
+ 	/* Set sensor specific fields in CCDC and Previewer module. */
+ 	ispccdc_set_wenlog(&isp->isp_ccdc, config->wenlog);
+ 
++	isp->mclk = config->cam_mclk;
++	isp_enable_mclk(dev);
+ 	/* FIXME: this should be set in ispccdc_config_vp() */
+ 	fmtcfg = isp_reg_readl(dev, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FMTCFG);
+ 	fmtcfg &= ISPCCDC_FMTCFG_VPIF_FRQ_MASK;
+@@ -2333,16 +2336,6 @@ static int isp_enable_clocks(struct device *dev)
+ 		dev_err(dev, "clk_enable cam_ick failed\n");
+ 		goto out_clk_enable_ick;
+ 	}
+-	r = clk_set_rate(isp->dpll4_m5_ck, CM_CAM_MCLK_HZ/2);
+-	if (r) {
+-		dev_err(dev, "clk_set_rate for dpll4_m5_ck failed\n");
+-		goto out_clk_enable_mclk;
+-	}
+-	r = clk_enable(isp->cam_mclk);
+-	if (r) {
+-		dev_err(dev, "clk_enable cam_mclk failed\n");
+-		goto out_clk_enable_mclk;
+-	}
+ 	r = clk_enable(isp->csi2_fck);
+ 	if (r) {
+ 		dev_err(dev, "clk_enable csi2_fck failed\n");
+@@ -2351,13 +2344,34 @@ static int isp_enable_clocks(struct device *dev)
+ 	return 0;
+ 
+ out_clk_enable_csi2_fclk:
+-	clk_disable(isp->cam_mclk);
+-out_clk_enable_mclk:
+ 	clk_disable(isp->cam_ick);
+ out_clk_enable_ick:
+ 	return r;
+ }
+ 
++int isp_enable_mclk(struct device *dev)
++{
++	struct isp_device *isp = dev_get_drvdata(dev);
++	int r;
++
++	r = clk_set_rate(isp->dpll4_m5_ck, isp->mclk);
++		if (r) {
++			dev_err(dev, "clk_set_rate for dpll4_m5_ck failed\n");
++			return r;
++	}
++	r = clk_enable(isp->cam_mclk);
++	if (r) {
++		dev_err(dev, "clk_enable cam_mclk failed\n");
++		return r;
++	}
++	return 0;
++}
++
++void isp_disable_mclk(struct isp_device *isp)
++{
++	clk_disable(isp->cam_mclk);
++}
++
+ /**
+  * isp_disable_clocks - Disable ISP clocks
+  * @dev: Device pointer specific to the OMAP3 ISP.
+@@ -2367,7 +2381,6 @@ static void isp_disable_clocks(struct device *dev)
+ 	struct isp_device *isp = dev_get_drvdata(dev);
+ 
+ 	clk_disable(isp->cam_ick);
+-	clk_disable(isp->cam_mclk);
+ 	clk_disable(isp->csi2_fck);
+ }
+ 
+@@ -2668,6 +2681,8 @@ static int isp_probe(struct platform_device *pdev)
+ 		goto out_free_mmio;
+ 	}
+ 
++	isp->mclk = CM_CAM_MCLK_HZ / 2;
++
+ 	isp->cam_ick = clk_get(&camera_dev, "cam_ick");
+ 	if (IS_ERR(isp->cam_ick)) {
+ 		dev_err(isp->dev, "clk_get cam_ick failed\n");
+diff --git a/drivers/media/video/isp/isp.h b/drivers/media/video/isp/isp.h
+index 6b100b6..85c3fa9 100644
+--- a/drivers/media/video/isp/isp.h
++++ b/drivers/media/video/isp/isp.h
+@@ -199,6 +199,7 @@ struct isp_interface_config {
+ 	u32 prev_slv;
+ 	u32 wenlog;
+ 	int wait_hs_vs;
++	u32 cam_mclk;
+ 	unsigned int pixelclk;
+ 	union {
+ 		struct par {
+@@ -425,6 +426,7 @@ struct isp_device {
+ 	struct isp_irq irq;
+ 	struct isp_pipeline pipeline;
+ 	u32 interrupts;
++	u32 mclk;
+ 	enum isp_running running;
+ 	int current_field;
+ 	int bt656ifen;
+@@ -489,6 +491,10 @@ struct device *isp_get(void);
+ 
+ int isp_put(void);
+ 
++int isp_enable_mclk(struct device *dev);
++
++void isp_disable_mclk(struct isp_device *dev);
++
+ int isp_queryctrl(struct v4l2_queryctrl *a);
+ 
+ int isp_querymenu(struct v4l2_querymenu *a);
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0019-omap3isp-core-Do-smarter-MCLK-setting.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0019-omap3isp-core-Do-smarter-MCLK-setting.patch
new file mode 100644
index 0000000..8a16d66
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0019-omap3isp-core-Do-smarter-MCLK-setting.patch
@@ -0,0 +1,47 @@
+From 3da817ad292e1414b175484cf384f1fcca351493 Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Wed, 25 Nov 2009 12:30:46 -0600
+Subject: [PATCH 19/75] omap3isp: core: Do smarter MCLK setting
+
+Since the ratio between MCLK and DPLL4_M5 could not be 1:1
+(i.e. on 3430 its 2:1), it's necessary to check ratio
+between those 2 first.
+
+This should make MCLK setting more adequate to different
+chipsets.
+
+Tested on Zoom2 (3430 ES3.1)
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ drivers/media/video/isp/isp.c |   13 ++++++++++++-
+ 1 files changed, 12 insertions(+), 1 deletions(-)
+
+diff --git a/drivers/media/video/isp/isp.c b/drivers/media/video/isp/isp.c
+index cf68720..29dd005 100644
+--- a/drivers/media/video/isp/isp.c
++++ b/drivers/media/video/isp/isp.c
+@@ -2353,8 +2353,19 @@ int isp_enable_mclk(struct device *dev)
+ {
+ 	struct isp_device *isp = dev_get_drvdata(dev);
+ 	int r;
++	unsigned long curr_mclk, curr_dpll4_m5, ratio;
+ 
+-	r = clk_set_rate(isp->dpll4_m5_ck, isp->mclk);
++	/* Check ratio between DPLL4_M5 and CAM_MCLK */
++	curr_mclk = clk_get_rate(isp->cam_mclk);
++	curr_dpll4_m5 = clk_get_rate(isp->dpll4_m5_ck);
++
++	/* Protection for potential Zero division, or zero-ratio result */
++	if (!curr_mclk || !curr_dpll4_m5)
++		BUG();
++
++	ratio = curr_mclk / curr_dpll4_m5;
++
++	r = clk_set_rate(isp->dpll4_m5_ck, isp->mclk / ratio);
+ 		if (r) {
+ 			dev_err(dev, "clk_set_rate for dpll4_m5_ck failed\n");
+ 			return r;
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0020-omap3beagle-camera-set-mclk-for-mt9t111.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0020-omap3beagle-camera-set-mclk-for-mt9t111.patch
new file mode 100644
index 0000000..6beeac8
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0020-omap3beagle-camera-set-mclk-for-mt9t111.patch
@@ -0,0 +1,36 @@
+From 434ac18f2ac9969570dd9347f9933f4ed5147749 Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Thu, 24 Jun 2010 16:34:13 -0500
+Subject: [PATCH 20/75] omap3beagle: camera: set mclk for mt9t111
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ arch/arm/mach-omap2/board-omap3beagle-camera.c |    5 +++++
+ 1 files changed, 5 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle-camera.c b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+index 75c8345..529a6be 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle-camera.c
++++ b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+@@ -49,6 +49,8 @@
+ 
+ #define CAM_USE_XCLKA       0
+ 
++#define ISP_MT9T111_MCLK		216000000
++
+ static struct regulator *beagle_mt9t111_reg1;
+ static struct regulator *beagle_mt9t111_reg2;
+ 
+@@ -60,6 +62,9 @@ static struct isp_interface_config mt9t111_if_config = {
+ 	.strobe			= 0x0,
+ 	.prestrobe		= 0x0,
+ 	.shutter		= 0x0,
++	.cam_mclk		= ISP_MT9T111_MCLK,
++	.wenlog 		= ISPCCDC_CFG_WENLOG_AND,
++	.wait_hs_vs		= 2,
+ 	.u.par.par_bridge	= 0x1,
+ 	.u.par.par_clk_pol	= 0x0,
+ };
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0021-mt9t111-Fix-max-supported-xclk.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0021-mt9t111-Fix-max-supported-xclk.patch
new file mode 100644
index 0000000..04ae8e5
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0021-mt9t111-Fix-max-supported-xclk.patch
@@ -0,0 +1,28 @@
+From f32acfd90df92c93328c093c2414f6a11b98ce57 Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Thu, 24 Jun 2010 17:43:23 -0500
+Subject: [PATCH 21/75] mt9t111: Fix max supported xclk
+
+According to Aptina documentation, the max should be 54 MHz, not 75 MHz.
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ include/media/mt9t111.h |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/include/media/mt9t111.h b/include/media/mt9t111.h
+index aae3f99..cd34885 100644
+--- a/include/media/mt9t111.h
++++ b/include/media/mt9t111.h
+@@ -42,7 +42,7 @@
+ /*i2c adress for MT9T111*/
+ #define MT9T111_I2C_ADDR  		(0x78 >> 1)
+ 
+-#define MT9T111_CLK_MAX 	(75000000) /* 75MHz */
++#define MT9T111_CLK_MAX 	(54000000) /* 54MHz */
+ #define MT9T111_CLK_MIN	(6000000)  /* 6Mhz */
+ 
+ #define MT9T111_I2C_CONFIG		(1)
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0022-omap3beagle-camera-Clarify-regulators-names.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0022-omap3beagle-camera-Clarify-regulators-names.patch
new file mode 100644
index 0000000..056295c
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0022-omap3beagle-camera-Clarify-regulators-names.patch
@@ -0,0 +1,103 @@
+From b5058c1ca4af6076dff7e1f592f871030ba31a95 Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Thu, 24 Jun 2010 17:53:55 -0500
+Subject: [PATCH 22/75] omap3beagle: camera: Clarify regulators names
+
+Changed:
+ - beagle_mt9t111_reg1 -> beagle_mt9t111_1_8v
+ - beagle_mt9t111_reg2 -> beagle_mt9t111_2_8v
+
+To help clarify sequence.
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ arch/arm/mach-omap2/board-omap3beagle-camera.c |   42 ++++++++++++------------
+ 1 files changed, 21 insertions(+), 21 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle-camera.c b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+index 529a6be..6babaf3 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle-camera.c
++++ b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+@@ -51,8 +51,8 @@
+ 
+ #define ISP_MT9T111_MCLK		216000000
+ 
+-static struct regulator *beagle_mt9t111_reg1;
+-static struct regulator *beagle_mt9t111_reg2;
++static struct regulator *beagle_mt9t111_1_8v;
++static struct regulator *beagle_mt9t111_2_8v;
+ 
+ #if defined(CONFIG_VIDEO_MT9T111) || defined(CONFIG_VIDEO_MT9T111_MODULE)
+ static struct isp_interface_config mt9t111_if_config = {
+@@ -167,10 +167,10 @@ static int mt9t111_power_set(struct v4l2_int_device *s, enum v4l2_power power)
+ 	case V4L2_POWER_STANDBY:
+ 		isp_set_xclk(vdev->cam->isp, 0, CAM_USE_XCLKA);
+ 
+-		if (regulator_is_enabled(beagle_mt9t111_reg1))
+-			regulator_disable(beagle_mt9t111_reg1);
+-		if (regulator_is_enabled(beagle_mt9t111_reg2))
+-			regulator_disable(beagle_mt9t111_reg2);
++		if (regulator_is_enabled(beagle_mt9t111_1_8v))
++			regulator_disable(beagle_mt9t111_1_8v);
++		if (regulator_is_enabled(beagle_mt9t111_2_8v))
++			regulator_disable(beagle_mt9t111_2_8v);
+ 		break;
+ 
+ 	case V4L2_POWER_ON:
+@@ -181,8 +181,8 @@ static int mt9t111_power_set(struct v4l2_int_device *s, enum v4l2_power power)
+ #endif
+ 
+ 		/* turn on analog power */
+-		regulator_enable(beagle_mt9t111_reg1);
+-		regulator_enable(beagle_mt9t111_reg2);
++		regulator_enable(beagle_mt9t111_1_8v);
++		regulator_enable(beagle_mt9t111_2_8v);
+ 		udelay(100);
+ 
+ 		break;
+@@ -212,16 +212,16 @@ static int beagle_cam_probe(struct platform_device *pdev)
+ {
+ 	int err;
+ 
+-	beagle_mt9t111_reg1 = regulator_get(&pdev->dev, "vaux3_1");
+-	if (IS_ERR(beagle_mt9t111_reg1)) {
++	beagle_mt9t111_1_8v = regulator_get(&pdev->dev, "vaux3_1");
++	if (IS_ERR(beagle_mt9t111_1_8v)) {
+ 		dev_err(&pdev->dev, "vaux3_1 regulator missing\n");
+-		return PTR_ERR(beagle_mt9t111_reg1);
++		return PTR_ERR(beagle_mt9t111_1_8v);
+ 	}
+-	beagle_mt9t111_reg2 = regulator_get(&pdev->dev, "vaux4_1");
+-	if (IS_ERR(beagle_mt9t111_reg2)) {
++	beagle_mt9t111_2_8v = regulator_get(&pdev->dev, "vaux4_1");
++	if (IS_ERR(beagle_mt9t111_2_8v)) {
+ 		dev_err(&pdev->dev, "vaux4_1 regulator missing\n");
+-		regulator_put(beagle_mt9t111_reg1);
+-		return PTR_ERR(beagle_mt9t111_reg2);
++		regulator_put(beagle_mt9t111_1_8v);
++		return PTR_ERR(beagle_mt9t111_2_8v);
+ 	}
+ 
+ 	printk(KERN_INFO MODULE_NAME ": Driver registration complete \n");
+@@ -231,12 +231,12 @@ static int beagle_cam_probe(struct platform_device *pdev)
+ 
+ static int beagle_cam_remove(struct platform_device *pdev)
+ {
+-	if (regulator_is_enabled(beagle_mt9t111_reg1))
+-		regulator_disable(beagle_mt9t111_reg1);
+-	regulator_put(beagle_mt9t111_reg1);
+-	if (regulator_is_enabled(beagle_mt9t111_reg2))
+-		regulator_disable(beagle_mt9t111_reg2);
+-	regulator_put(beagle_mt9t111_reg2);
++	if (regulator_is_enabled(beagle_mt9t111_1_8v))
++		regulator_disable(beagle_mt9t111_1_8v);
++	regulator_put(beagle_mt9t111_1_8v);
++	if (regulator_is_enabled(beagle_mt9t111_2_8v))
++		regulator_disable(beagle_mt9t111_2_8v);
++	regulator_put(beagle_mt9t111_2_8v);
+ 
+ 	return 0;
+ }
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0023-omap3beagle-camera-Fix-powerup-sequence.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0023-omap3beagle-camera-Fix-powerup-sequence.patch
new file mode 100644
index 0000000..085c80c
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0023-omap3beagle-camera-Fix-powerup-sequence.patch
@@ -0,0 +1,103 @@
+From 294459d9500c75256cff282f441b6cf68077a3e9 Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Thu, 24 Jun 2010 18:21:52 -0500
+Subject: [PATCH 23/75] omap3beagle: camera: Fix powerup sequence
+
+The powerup sequence was very incomplete. After revisiting the
+Aptina developer's guide, the resulting powerup sequence is followed.
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ arch/arm/mach-omap2/board-omap3beagle-camera.c |   49 ++++++++++++++++++++++--
+ 1 files changed, 45 insertions(+), 4 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle-camera.c b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+index 6babaf3..792c48d 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle-camera.c
++++ b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+@@ -51,6 +51,8 @@
+ 
+ #define ISP_MT9T111_MCLK		216000000
+ 
++#define LEOPARD_RESET_GPIO		98
++
+ static struct regulator *beagle_mt9t111_1_8v;
+ static struct regulator *beagle_mt9t111_2_8v;
+ 
+@@ -174,16 +176,42 @@ static int mt9t111_power_set(struct v4l2_int_device *s, enum v4l2_power power)
+ 		break;
+ 
+ 	case V4L2_POWER_ON:
+-		isp_set_xclk(vdev->cam->isp, MT9T111_CLK_MIN, CAM_USE_XCLKA);
+-
+ #if defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE)
+ 		isp_configure_interface(vdev->cam->isp, &mt9t111_if_config);
+ #endif
+ 
+-		/* turn on analog power */
++		/* Set RESET_BAR to 0 */
++		gpio_set_value(LEOPARD_RESET_GPIO, 0);
++
++		/* turn on VDD */
+ 		regulator_enable(beagle_mt9t111_1_8v);
++
++		mdelay(1);
++
++		/* turn on VDD_IO */
+ 		regulator_enable(beagle_mt9t111_2_8v);
+-		udelay(100);
++
++		mdelay(50);
++
++		/* Enable EXTCLK */
++		isp_set_xclk(vdev->cam->isp, MT9T111_CLK_MIN, CAM_USE_XCLKA);
++
++		/*
++		 * Wait at least 70 CLK cycles (w/EXTCLK = 6MHz, or CLK_MIN):
++		 * ((1000000 * 70) / 6000000) = aprox 12 us.
++		 */
++
++		udelay(12);
++
++		/* Set RESET_BAR to 1 */
++		gpio_set_value(LEOPARD_RESET_GPIO, 1);
++
++		/*
++		 * Wait at least 100 CLK cycles (w/EXTCLK = 6MHz, or CLK_MIN):
++		 * ((1000000 * 100) / 6000000) = aprox 17 us.
++		 */
++
++		udelay(17);
+ 
+ 		break;
+ 
+@@ -224,6 +252,17 @@ static int beagle_cam_probe(struct platform_device *pdev)
+ 		return PTR_ERR(beagle_mt9t111_2_8v);
+ 	}
+ 
++	if (gpio_request(LEOPARD_RESET_GPIO, "cam_rst") != 0) {
++		dev_err(&pdev->dev, "Could not request GPIO %d",
++			LEOPARD_RESET_GPIO);
++		regulator_put(beagle_mt9t111_2_8v);
++		regulator_put(beagle_mt9t111_1_8v);
++		return -ENODEV;
++	}
++
++	/* set to output mode, default value 0 */
++	gpio_direction_output(LEOPARD_RESET_GPIO, 0);
++
+ 	printk(KERN_INFO MODULE_NAME ": Driver registration complete \n");
+ 
+ 	return 0;
+@@ -238,6 +277,8 @@ static int beagle_cam_remove(struct platform_device *pdev)
+ 		regulator_disable(beagle_mt9t111_2_8v);
+ 	regulator_put(beagle_mt9t111_2_8v);
+ 
++	gpio_free(LEOPARD_RESET_GPIO);
++
+ 	return 0;
+ }
+ 
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0024-omap3beagle-camera-Change-vaux4-to-1.8v.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0024-omap3beagle-camera-Change-vaux4-to-1.8v.patch
new file mode 100644
index 0000000..5897545
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0024-omap3beagle-camera-Change-vaux4-to-1.8v.patch
@@ -0,0 +1,32 @@
+From 967227a235ddafbc5a5391093e95a12972e93e9d Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Fri, 25 Jun 2010 11:24:07 -0500
+Subject: [PATCH 24/75] omap3beagle: camera: Change vaux4 to 1.8v
+
+Both voltage sources seem to need 1.8v.
+
+After this, sensor is detected :)
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ arch/arm/mach-omap2/board-omap3beagle.c |    4 ++--
+ 1 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index 3d4b0bc..09e8459 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -446,8 +446,8 @@ static struct regulator_init_data beagle_vaux3 = {
+ /* VAUX4 for CAM_2V8 */
+ static struct regulator_init_data beagle_vaux4 = {
+ 	.constraints = {
+-		.min_uV			= 2800000,
+-		.max_uV			= 2800000,
++		.min_uV			= 1800000,
++		.max_uV			= 1800000,
+ 		.apply_uV		= true,
+ 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+ 					| REGULATOR_MODE_STANDBY,
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0025-omap3beagle-camera-Rename-regulators-to-match-actual.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0025-omap3beagle-camera-Rename-regulators-to-match-actual.patch
new file mode 100644
index 0000000..0f930f5
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0025-omap3beagle-camera-Rename-regulators-to-match-actual.patch
@@ -0,0 +1,110 @@
+From f5bc21e02cfc66734591104ec1b58556dccfed70 Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Fri, 25 Jun 2010 12:03:59 -0500
+Subject: [PATCH 25/75] omap3beagle: camera: Rename regulators to match actual voltage levels
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ arch/arm/mach-omap2/board-omap3beagle-camera.c |   46 ++++++++++++------------
+ 1 files changed, 23 insertions(+), 23 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle-camera.c b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+index 792c48d..8a4b7bc 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle-camera.c
++++ b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+@@ -53,8 +53,8 @@
+ 
+ #define LEOPARD_RESET_GPIO		98
+ 
+-static struct regulator *beagle_mt9t111_1_8v;
+-static struct regulator *beagle_mt9t111_2_8v;
++static struct regulator *beagle_mt9t111_1_8v1;
++static struct regulator *beagle_mt9t111_1_8v2;
+ 
+ #if defined(CONFIG_VIDEO_MT9T111) || defined(CONFIG_VIDEO_MT9T111_MODULE)
+ static struct isp_interface_config mt9t111_if_config = {
+@@ -169,10 +169,10 @@ static int mt9t111_power_set(struct v4l2_int_device *s, enum v4l2_power power)
+ 	case V4L2_POWER_STANDBY:
+ 		isp_set_xclk(vdev->cam->isp, 0, CAM_USE_XCLKA);
+ 
+-		if (regulator_is_enabled(beagle_mt9t111_1_8v))
+-			regulator_disable(beagle_mt9t111_1_8v);
+-		if (regulator_is_enabled(beagle_mt9t111_2_8v))
+-			regulator_disable(beagle_mt9t111_2_8v);
++		if (regulator_is_enabled(beagle_mt9t111_1_8v1))
++			regulator_disable(beagle_mt9t111_1_8v1);
++		if (regulator_is_enabled(beagle_mt9t111_1_8v2))
++			regulator_disable(beagle_mt9t111_1_8v2);
+ 		break;
+ 
+ 	case V4L2_POWER_ON:
+@@ -184,12 +184,12 @@ static int mt9t111_power_set(struct v4l2_int_device *s, enum v4l2_power power)
+ 		gpio_set_value(LEOPARD_RESET_GPIO, 0);
+ 
+ 		/* turn on VDD */
+-		regulator_enable(beagle_mt9t111_1_8v);
++		regulator_enable(beagle_mt9t111_1_8v1);
+ 
+ 		mdelay(1);
+ 
+ 		/* turn on VDD_IO */
+-		regulator_enable(beagle_mt9t111_2_8v);
++		regulator_enable(beagle_mt9t111_1_8v2);
+ 
+ 		mdelay(50);
+ 
+@@ -240,23 +240,23 @@ static int beagle_cam_probe(struct platform_device *pdev)
+ {
+ 	int err;
+ 
+-	beagle_mt9t111_1_8v = regulator_get(&pdev->dev, "vaux3_1");
+-	if (IS_ERR(beagle_mt9t111_1_8v)) {
++	beagle_mt9t111_1_8v1 = regulator_get(&pdev->dev, "vaux3_1");
++	if (IS_ERR(beagle_mt9t111_1_8v1)) {
+ 		dev_err(&pdev->dev, "vaux3_1 regulator missing\n");
+-		return PTR_ERR(beagle_mt9t111_1_8v);
++		return PTR_ERR(beagle_mt9t111_1_8v1);
+ 	}
+-	beagle_mt9t111_2_8v = regulator_get(&pdev->dev, "vaux4_1");
+-	if (IS_ERR(beagle_mt9t111_2_8v)) {
++	beagle_mt9t111_1_8v2 = regulator_get(&pdev->dev, "vaux4_1");
++	if (IS_ERR(beagle_mt9t111_1_8v2)) {
+ 		dev_err(&pdev->dev, "vaux4_1 regulator missing\n");
+-		regulator_put(beagle_mt9t111_1_8v);
+-		return PTR_ERR(beagle_mt9t111_2_8v);
++		regulator_put(beagle_mt9t111_1_8v1);
++		return PTR_ERR(beagle_mt9t111_1_8v2);
+ 	}
+ 
+ 	if (gpio_request(LEOPARD_RESET_GPIO, "cam_rst") != 0) {
+ 		dev_err(&pdev->dev, "Could not request GPIO %d",
+ 			LEOPARD_RESET_GPIO);
+-		regulator_put(beagle_mt9t111_2_8v);
+-		regulator_put(beagle_mt9t111_1_8v);
++		regulator_put(beagle_mt9t111_1_8v2);
++		regulator_put(beagle_mt9t111_1_8v1);
+ 		return -ENODEV;
+ 	}
+ 
+@@ -270,12 +270,12 @@ static int beagle_cam_probe(struct platform_device *pdev)
+ 
+ static int beagle_cam_remove(struct platform_device *pdev)
+ {
+-	if (regulator_is_enabled(beagle_mt9t111_1_8v))
+-		regulator_disable(beagle_mt9t111_1_8v);
+-	regulator_put(beagle_mt9t111_1_8v);
+-	if (regulator_is_enabled(beagle_mt9t111_2_8v))
+-		regulator_disable(beagle_mt9t111_2_8v);
+-	regulator_put(beagle_mt9t111_2_8v);
++	if (regulator_is_enabled(beagle_mt9t111_1_8v1))
++		regulator_disable(beagle_mt9t111_1_8v1);
++	regulator_put(beagle_mt9t111_1_8v1);
++	if (regulator_is_enabled(beagle_mt9t111_1_8v2))
++		regulator_disable(beagle_mt9t111_1_8v2);
++	regulator_put(beagle_mt9t111_1_8v2);
+ 
+ 	gpio_free(LEOPARD_RESET_GPIO);
+ 
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0026-omap3beagle-camera-Complement-remainig-sensor-hw-con.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0026-omap3beagle-camera-Complement-remainig-sensor-hw-con.patch
new file mode 100644
index 0000000..b4357a5
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0026-omap3beagle-camera-Complement-remainig-sensor-hw-con.patch
@@ -0,0 +1,37 @@
+From 871c9ac8687787ff29c5445325acf1ca388b9563 Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Fri, 25 Jun 2010 12:04:48 -0500
+Subject: [PATCH 26/75] omap3beagle: camera: Complement remainig sensor hw config settings
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ arch/arm/mach-omap2/board-omap3beagle-camera.c |    6 ++++++
+ 1 files changed, 6 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle-camera.c b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+index 8a4b7bc..b0148d6 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle-camera.c
++++ b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+@@ -57,6 +57,10 @@ static struct regulator *beagle_mt9t111_1_8v1;
+ static struct regulator *beagle_mt9t111_1_8v2;
+ 
+ #if defined(CONFIG_VIDEO_MT9T111) || defined(CONFIG_VIDEO_MT9T111_MODULE)
++
++/* Arbitrary memory handling limit */
++#define MT9T111_BIGGEST_FRAME_BYTE_SIZE	PAGE_ALIGN(2048 * 1536 * 4)
++
+ static struct isp_interface_config mt9t111_if_config = {
+ 	.ccdc_par_ser		= ISP_PARLL, 
+ 	.dataline_shift		= 0x0,
+@@ -125,6 +129,8 @@ static struct omap34xxcam_hw_config mt9t111_hwc = {
+ 	.dev_minor		= 0,
+ 	.dev_type		= OMAP34XXCAM_SLAVE_SENSOR,
+ 	.u.sensor.sensor_isp	= 1,
++	.u.sensor.capture_mem	= MT9T111_BIGGEST_FRAME_BYTE_SIZE * 2,
++	.u.sensor.ival_default	= { 1, 10 },
+ };
+ #endif
+ 
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0027-mt9t111-Fix-detect-function-retval-and-cleanup-print.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0027-mt9t111-Fix-detect-function-retval-and-cleanup-print.patch
new file mode 100644
index 0000000..537628a
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0027-mt9t111-Fix-detect-function-retval-and-cleanup-print.patch
@@ -0,0 +1,48 @@
+From a5693b7d9b22036323edf1e4200e6e59f67e8f9d Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Fri, 25 Jun 2010 13:43:54 -0500
+Subject: [PATCH 27/75] mt9t111: Fix detect function retval and cleanup prints
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ drivers/media/video/mt9t111.c |    8 +++-----
+ 1 files changed, 3 insertions(+), 5 deletions(-)
+
+diff --git a/drivers/media/video/mt9t111.c b/drivers/media/video/mt9t111.c
+index 6a7b2c0..08122ff 100644
+--- a/drivers/media/video/mt9t111.c
++++ b/drivers/media/video/mt9t111.c
+@@ -221,7 +221,6 @@ mt9t111_detect(struct i2c_client *client)
+ 	/* chip ID is at address 0 */
+ 	if (mt9t111_read_reg(client, MT9T111_CHIP_ID, &val) < 0)
+ 		return -ENODEV;
+-	dev_info(&client->dev, "model id detected 0x%x\n", val);
+ 
+ 	if (val != MT9T111_CHIP_ID_VALUE) {
+ 		dev_warn(&client->dev, "model id mismatch received 0x%x"
+@@ -231,7 +230,7 @@ mt9t111_detect(struct i2c_client *client)
+ 		return -ENODEV;
+ 	}
+ 
+-	return 0;
++	return (int)val;
+ 
+ }
+ 
+@@ -390,11 +389,10 @@ static int ioctl_s_power(struct v4l2_int_device *s, enum v4l2_power on)
+ 			sensor->state = SENSOR_NOT_DETECTED;
+ 			return rval;
+ 		}
+-		mt9t111_loaddefault(c);
++		dev_info(&c->dev, "chip version 0x%02x detected\n", rval);
+ 		sensor->state = SENSOR_DETECTED;
+ 		sensor->ver = rval;
+-		pr_info("mt9t111" " chip version 0x%02x detected\n",
+-								sensor->ver);
++		mt9t111_loaddefault(c);
+ 	}
+ 	return 0;
+ }
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0028-omap3beagle-camera-Set-padconf-settings-in-cam-init.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0028-omap3beagle-camera-Set-padconf-settings-in-cam-init.patch
new file mode 100644
index 0000000..6e77bfd
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0028-omap3beagle-camera-Set-padconf-settings-in-cam-init.patch
@@ -0,0 +1,66 @@
+From 7417633c6dbf657cf3778800d59e94a9b7bf6942 Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Fri, 25 Jun 2010 16:01:00 -0500
+Subject: [PATCH 28/75] omap3beagle: camera: Set padconf settings in cam init
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ arch/arm/mach-omap2/board-omap3beagle-camera.c |   35 ++++++++++++++++++++++++
+ 1 files changed, 35 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle-camera.c b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+index b0148d6..75471f2 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle-camera.c
++++ b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+@@ -34,6 +34,7 @@
+ 
+ #include <plat/mux.h>
+ #include <plat/board.h>
++#include <plat/control.h>
+ 
+ #include <media/v4l2-int-device.h>
+ #include <media/mt9t111.h>
+@@ -285,6 +286,40 @@ static int beagle_cam_remove(struct platform_device *pdev)
+ 
+ 	gpio_free(LEOPARD_RESET_GPIO);
+ 
++	/* MUX init */
++	omap_ctrl_writew(OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
++			 0x10C); /* CAM_HS */
++	omap_ctrl_writew(OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
++			 0x10E); /* CAM_VS */
++	omap_ctrl_writew(OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
++			 0x110); /* CAM_XCLKA */
++	omap_ctrl_writew(OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
++			 0x112); /* CAM_PCLK */
++	omap_ctrl_writew(OMAP_PIN_INPUT | OMAP_MUX_MODE0,
++			 0x116); /* CAM_D0 */
++	omap_ctrl_writew(OMAP_PIN_INPUT | OMAP_MUX_MODE0,
++			 0x118); /* CAM_D1 */
++	omap_ctrl_writew(OMAP_PIN_INPUT | OMAP_MUX_MODE0,
++			 0x11A); /* CAM_D2 */
++	omap_ctrl_writew(OMAP_PIN_INPUT | OMAP_MUX_MODE0,
++			 0x11C); /* CAM_D3 */
++	omap_ctrl_writew(OMAP_PIN_INPUT | OMAP_MUX_MODE0,
++			 0x11E); /* CAM_D4 */
++	omap_ctrl_writew(OMAP_PIN_INPUT | OMAP_MUX_MODE0,
++			 0x120); /* CAM_D5 */
++	omap_ctrl_writew(OMAP_PIN_INPUT | OMAP_MUX_MODE0,
++			 0x122); /* CAM_D6 */
++	omap_ctrl_writew(OMAP_PIN_INPUT | OMAP_MUX_MODE0,
++			 0x124); /* CAM_D7 */
++	omap_ctrl_writew(OMAP_PIN_INPUT | OMAP_MUX_MODE0,
++			 0x126); /* CAM_D8 */
++	omap_ctrl_writew(OMAP_PIN_INPUT | OMAP_MUX_MODE0,
++			 0x128); /* CAM_D9 */
++	omap_ctrl_writew(OMAP_PIN_INPUT | OMAP_MUX_MODE0,
++			 0x12A); /* CAM_D10 */
++	omap_ctrl_writew(OMAP_PIN_INPUT | OMAP_MUX_MODE0,
++			 0x12C); /* CAM_D11 */
++
+ 	return 0;
+ }
+ 
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0029-omap3beagle-camera-only-register-camera-driver-for-3.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0029-omap3beagle-camera-only-register-camera-driver-for-3.patch
new file mode 100644
index 0000000..4b25b59
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0029-omap3beagle-camera-only-register-camera-driver-for-3.patch
@@ -0,0 +1,31 @@
+From 6cce810371e763a367b69a38e53635657804694c Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@dominion.thruhere.net>
+Date: Sun, 27 Jun 2010 16:11:39 +0200
+Subject: [PATCH 29/75] omap3beagle: camera: only register camera driver for 36xx based SoCs
+
+This is a workaround for the bootcrash when used on 35xx based beagleboards.
+
+Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
+---
+ arch/arm/mach-omap2/board-omap3beagle-camera.c |    6 ++++--
+ 1 files changed, 4 insertions(+), 2 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle-camera.c b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+index 75471f2..8faa437 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle-camera.c
++++ b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+@@ -355,7 +355,9 @@ static struct platform_driver beagle_cam_driver = {
+  */
+ int __init omap3beaglelmb_init(void)
+ {
+-	platform_driver_register(&beagle_cam_driver);
+-	return 0;
++	if (cpu_is_omap3630()) {
++			platform_driver_register(&beagle_cam_driver);
++	}
++			return 0;
+ }
+ late_initcall(omap3beaglelmb_init);
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0030-WIP-mt9t111-Work-in-progress-for-camera-enablement.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0030-WIP-mt9t111-Work-in-progress-for-camera-enablement.patch
new file mode 100644
index 0000000..c223696
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0030-WIP-mt9t111-Work-in-progress-for-camera-enablement.patch
@@ -0,0 +1,53 @@
+From 05232a5ba68cab14877a4032cc7995c15254195d Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Fri, 25 Jun 2010 16:01:47 -0500
+Subject: [PATCH 30/75] WIP: mt9t111: Work in progress for camera enablement
+
+This is changing so far:
+- Remove useless printk's in enum_frameinterval calls.
+- Call mt9t111_loaddefault instead of mt9t111_configure dummy function.
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ drivers/media/video/mt9t111.c |   11 +----------
+ 1 files changed, 1 insertions(+), 10 deletions(-)
+
+diff --git a/drivers/media/video/mt9t111.c b/drivers/media/video/mt9t111.c
+index 08122ff..10080af 100644
+--- a/drivers/media/video/mt9t111.c
++++ b/drivers/media/video/mt9t111.c
+@@ -288,14 +288,6 @@ static int ioctl_enum_frameintervals(struct v4l2_int_device *s,
+ {
+ 	int ifmt;
+ 
+-	printk(KERN_INFO "entering ioctl_enum_frameintervals\n");
+-	printk(KERN_INFO "index = %d, pixel_format = 0x%x,"
+-			 " width = %d, height = %d\n",
+-			 frmi->index, frmi->pixel_format,
+-			 frmi->width, frmi->height);
+-	printk(KERN_INFO "mt9t111 format = 0x%x\n",
+-			 mt9t111_formats[0].pixelformat);
+-
+ 	if (frmi->index >= NUM_CAPTURE_FRAMEINTERVALS)
+ 		return -EINVAL;
+ 
+@@ -379,7 +371,7 @@ static int ioctl_s_power(struct v4l2_int_device *s, enum v4l2_power on)
+ 	}
+ 
+ 	if ((on == V4L2_POWER_ON) && (sensor->state == SENSOR_DETECTED))
+-		mt9t111_configure(s);
++		mt9t111_loaddefault(c);
+ 
+ 	if ((on == V4L2_POWER_ON) && (sensor->state == SENSOR_NOT_DETECTED)) {
+ 		rval = mt9t111_detect(c);
+@@ -392,7 +384,6 @@ static int ioctl_s_power(struct v4l2_int_device *s, enum v4l2_power on)
+ 		dev_info(&c->dev, "chip version 0x%02x detected\n", rval);
+ 		sensor->state = SENSOR_DETECTED;
+ 		sensor->ver = rval;
+-		mt9t111_loaddefault(c);
+ 	}
+ 	return 0;
+ }
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0031-BeagleXM-Cam-Add-support-for-MT9V113-VGA-Sensor.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0031-BeagleXM-Cam-Add-support-for-MT9V113-VGA-Sensor.patch
new file mode 100644
index 0000000..1c19b77
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0031-BeagleXM-Cam-Add-support-for-MT9V113-VGA-Sensor.patch
@@ -0,0 +1,2441 @@
+From 4080bcdb05f5fdb51a16faa011a68205f0cb7482 Mon Sep 17 00:00:00 2001
+From: Vaibhav Hiremath <hvaibhav@ti.com>
+Date: Wed, 7 Jul 2010 11:55:43 +0530
+Subject: [PATCH 31/75] BeagleXM:Cam: Add support for MT9V113 VGA Sensor
+
+This patch replaces the MT9T111 to MT9V113 sensor.
+---
+ arch/arm/mach-omap2/board-omap3beagle-camera.c |  132 ++-
+ arch/arm/mach-omap2/board-omap3beagle.c        |   32 +-
+ drivers/media/video/Kconfig                    |   10 +
+ drivers/media/video/Makefile                   |    1 +
+ drivers/media/video/mt9v113.c                  | 1522 ++++++++++++++++++++++++
+ drivers/media/video/mt9v113_regs.h             |  294 +++++
+ include/media/mt9v113.h                        |   83 ++
+ include/media/v4l2-int-device.h                |   27 +
+ 8 files changed, 2023 insertions(+), 78 deletions(-)
+ create mode 100644 drivers/media/video/mt9v113.c
+ create mode 100644 drivers/media/video/mt9v113_regs.h
+ create mode 100644 include/media/mt9v113.h
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle-camera.c b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+index 8faa437..6c06265 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle-camera.c
++++ b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+@@ -37,7 +37,7 @@
+ #include <plat/control.h>
+ 
+ #include <media/v4l2-int-device.h>
+-#include <media/mt9t111.h>
++#include <media/mt9v113.h>
+ 
+ /* Include V4L2 ISP-Camera driver related header file */
+ #include <../drivers/media/video/omap34xxcam.h>
+@@ -50,99 +50,99 @@
+ 
+ #define CAM_USE_XCLKA       0
+ 
+-#define ISP_MT9T111_MCLK		216000000
++#define ISP_MT9V113_MCLK		216000000
+ 
+ #define LEOPARD_RESET_GPIO		98
+ 
+-static struct regulator *beagle_mt9t111_1_8v1;
+-static struct regulator *beagle_mt9t111_1_8v2;
++static struct regulator *beagle_mt9v113_1_8v1;
++static struct regulator *beagle_mt9v113_1_8v2;
+ 
+-#if defined(CONFIG_VIDEO_MT9T111) || defined(CONFIG_VIDEO_MT9T111_MODULE)
++#if defined(CONFIG_VIDEO_MT9V113) || defined(CONFIG_VIDEO_MT9V113_MODULE)
+ 
+ /* Arbitrary memory handling limit */
+-#define MT9T111_BIGGEST_FRAME_BYTE_SIZE	PAGE_ALIGN(2048 * 1536 * 4)
++#define MT9V113_BIGGEST_FRAME_BYTE_SIZE	PAGE_ALIGN(2048 * 1536 * 4)
+ 
+-static struct isp_interface_config mt9t111_if_config = {
+-	.ccdc_par_ser		= ISP_PARLL, 
++static struct isp_interface_config mt9v113_if_config = {
++	.ccdc_par_ser		= ISP_PARLL,
+ 	.dataline_shift		= 0x0,
+ 	.hsvs_syncdetect	= ISPCTRL_SYNC_DETECT_VSRISE,
+ 	.strobe			= 0x0,
+ 	.prestrobe		= 0x0,
+ 	.shutter		= 0x0,
+-	.cam_mclk		= ISP_MT9T111_MCLK,
++	.cam_mclk		= ISP_MT9V113_MCLK,
+ 	.wenlog 		= ISPCCDC_CFG_WENLOG_AND,
+ 	.wait_hs_vs		= 2,
+ 	.u.par.par_bridge	= 0x1,
+ 	.u.par.par_clk_pol	= 0x0,
+ };
+ 
+-static struct v4l2_ifparm mt9t111_ifparm_s = {
++static struct v4l2_ifparm mt9v113_ifparm_s = {
+ #if 1
+-	.if_type = V4L2_IF_TYPE_RAW, 
++	.if_type = V4L2_IF_TYPE_RAW,
+ 	.u 	 = {
+-		.raw = {  
++		.raw = {
+ 			.frame_start_on_rising_vs = 1,
+ 			.bt_sync_correct	= 0,
+ 			.swap			= 0,
+ 			.latch_clk_inv		= 0,
+ 			.nobt_hs_inv		= 0,	/* active high */
+ 			.nobt_vs_inv		= 0,	/* active high */
+-			.clock_min		= MT9T111_CLK_MIN,
+-			.clock_max		= MT9T111_CLK_MAX,
++			.clock_min		= MT9V113_CLK_MIN,
++			.clock_max		= MT9V113_CLK_MAX,
+ 		},
+ 	},
+-#else		
+-	.if_type = V4L2_IF_TYPE_YCbCr, 
++#else
++	.if_type = V4L2_IF_TYPE_YCbCr,
+ 	.u 	 = {
+-		.ycbcr = {  
++		.ycbcr = {
+ 			.frame_start_on_rising_vs = 1,
+ 			.bt_sync_correct	= 0,
+ 			.swap			= 0,
+ 			.latch_clk_inv		= 0,
+ 			.nobt_hs_inv		= 0,	/* active high */
+ 			.nobt_vs_inv		= 0,	/* active high */
+-			.clock_min		= MT9T111_CLK_MIN,
+-			.clock_max		= MT9T111_CLK_MAX,
++			.clock_min		= MT9V113_CLK_MIN,
++			.clock_max		= MT9V113_CLK_MAX,
+ 		},
+ 	},
+ #endif
+ };
+ 
+ /**
+- * @brief mt9t111_ifparm - Returns the mt9t111 interface parameters
++ * @brief mt9v113_ifparm - Returns the mt9v113 interface parameters
+  *
+  * @param p - pointer to v4l2_ifparm structure
+  *
+  * @return result of operation - 0 is success
+  */
+-static int mt9t111_ifparm(struct v4l2_ifparm *p)
++static int mt9v113_ifparm(struct v4l2_ifparm *p)
+ {
+ 	if (p == NULL)
+ 		return -EINVAL;
+ 
+-	*p = mt9t111_ifparm_s;
++	*p = mt9v113_ifparm_s;
+ 	return 0;
+ }
+ 
+ #if defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE)
+-static struct omap34xxcam_hw_config mt9t111_hwc = {
++static struct omap34xxcam_hw_config mt9v113_hwc = {
+ 	.dev_index		= 0,
+ 	.dev_minor		= 0,
+ 	.dev_type		= OMAP34XXCAM_SLAVE_SENSOR,
+ 	.u.sensor.sensor_isp	= 1,
+-	.u.sensor.capture_mem	= MT9T111_BIGGEST_FRAME_BYTE_SIZE * 2,
++	.u.sensor.capture_mem	= MT9V113_BIGGEST_FRAME_BYTE_SIZE * 2,
+ 	.u.sensor.ival_default	= { 1, 10 },
+ };
+ #endif
+ 
+ /**
+- * @brief mt9t111_set_prv_data - Returns mt9t111 omap34xx driver private data
++ * @brief mt9v113_set_prv_data - Returns mt9v113 omap34xx driver private data
+  *
+  * @param priv - pointer to omap34xxcam_hw_config structure
+  *
+  * @return result of operation - 0 is success
+  */
+-static int mt9t111_set_prv_data(void *priv)
++static int mt9v113_set_prv_data(void *priv)
+ {
+ #if defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE)
+ 	struct omap34xxcam_hw_config *hwc = priv;
+@@ -150,10 +150,10 @@ static int mt9t111_set_prv_data(void *priv)
+ 	if (priv == NULL)
+ 		return -EINVAL;
+ 
+-	hwc->u.sensor = mt9t111_hwc.u.sensor;
+-	hwc->dev_index = mt9t111_hwc.dev_index;
+-	hwc->dev_minor = mt9t111_hwc.dev_minor;
+-	hwc->dev_type = mt9t111_hwc.dev_type;
++	hwc->u.sensor = mt9v113_hwc.u.sensor;
++	hwc->dev_index = mt9v113_hwc.dev_index;
++	hwc->dev_minor = mt9v113_hwc.dev_minor;
++	hwc->dev_type = mt9v113_hwc.dev_type;
+ 	return 0;
+ #else
+ 	return -EINVAL;
+@@ -161,13 +161,13 @@ static int mt9t111_set_prv_data(void *priv)
+ }
+ 
+ /**
+- * @brief mt9t111_power_set - Power-on or power-off TVP5146 device
++ * @brief mt9v113_power_set - Power-on or power-off TVP5146 device
+  *
+  * @param power - enum, Power on/off, resume/standby
+  *
+  * @return result of operation - 0 is success
+  */
+-static int mt9t111_power_set(struct v4l2_int_device *s, enum v4l2_power power)
++static int mt9v113_power_set(struct v4l2_int_device *s, enum v4l2_power power)
+ {
+ 	struct omap34xxcam_videodev *vdev = s->u.slave->master->priv;
+ 
+@@ -176,32 +176,32 @@ static int mt9t111_power_set(struct v4l2_int_device *s, enum v4l2_power power)
+ 	case V4L2_POWER_STANDBY:
+ 		isp_set_xclk(vdev->cam->isp, 0, CAM_USE_XCLKA);
+ 
+-		if (regulator_is_enabled(beagle_mt9t111_1_8v1))
+-			regulator_disable(beagle_mt9t111_1_8v1);
+-		if (regulator_is_enabled(beagle_mt9t111_1_8v2))
+-			regulator_disable(beagle_mt9t111_1_8v2);
++		if (regulator_is_enabled(beagle_mt9v113_1_8v1))
++			regulator_disable(beagle_mt9v113_1_8v1);
++		if (regulator_is_enabled(beagle_mt9v113_1_8v2))
++			regulator_disable(beagle_mt9v113_1_8v2);
+ 		break;
+ 
+ 	case V4L2_POWER_ON:
+ #if defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE)
+-		isp_configure_interface(vdev->cam->isp, &mt9t111_if_config);
++		isp_configure_interface(vdev->cam->isp, &mt9v113_if_config);
+ #endif
+ 
+ 		/* Set RESET_BAR to 0 */
+ 		gpio_set_value(LEOPARD_RESET_GPIO, 0);
+ 
+ 		/* turn on VDD */
+-		regulator_enable(beagle_mt9t111_1_8v1);
++		regulator_enable(beagle_mt9v113_1_8v1);
+ 
+ 		mdelay(1);
+ 
+ 		/* turn on VDD_IO */
+-		regulator_enable(beagle_mt9t111_1_8v2);
++		regulator_enable(beagle_mt9v113_1_8v2);
+ 
+ 		mdelay(50);
+ 
+ 		/* Enable EXTCLK */
+-		isp_set_xclk(vdev->cam->isp, MT9T111_CLK_MIN, CAM_USE_XCLKA);
++		isp_set_xclk(vdev->cam->isp, MT9V113_CLK_MIN, CAM_USE_XCLKA);
+ 
+ 		/*
+ 		 * Wait at least 70 CLK cycles (w/EXTCLK = 6MHz, or CLK_MIN):
+@@ -229,44 +229,48 @@ static int mt9t111_power_set(struct v4l2_int_device *s, enum v4l2_power power)
+ 	return 0;
+ }
+ 
+-struct mt9t111_platform_data mt9t111_pdata = {
++struct mt9v113_platform_data mt9v113_pdata = {
+ 	.master		= "omap34xxcam",
+-	.power_set	= mt9t111_power_set,
+-	.priv_data_set	= mt9t111_set_prv_data,
+-	.ifparm		= mt9t111_ifparm,
++	.power_set	= mt9v113_power_set,
++	.priv_data_set	= mt9v113_set_prv_data,
++	.ifparm		= mt9v113_ifparm,
+ 	/* Some interface dependent params */
+ 	.clk_polarity	= 0, /* data clocked out on falling edge */
+ 	.hs_polarity	= 1, /* 0 - Active low, 1- Active high */
+ 	.vs_polarity	= 1, /* 0 - Active low, 1- Active high */
+ };
+ 
+-#endif				/* #ifdef CONFIG_VIDEO_MT9T111 */
++#endif				/* #ifdef CONFIG_VIDEO_MT9V113 */
+ 
+ 
+ static int beagle_cam_probe(struct platform_device *pdev)
+ {
+ 	int err;
+ 
+-	beagle_mt9t111_1_8v1 = regulator_get(&pdev->dev, "vaux3_1");
+-	if (IS_ERR(beagle_mt9t111_1_8v1)) {
++	printk("%s:%d\n", __func__, __LINE__);
++	beagle_mt9v113_1_8v1 = regulator_get(&pdev->dev, "vaux3_1");
++	if (IS_ERR(beagle_mt9v113_1_8v1)) {
+ 		dev_err(&pdev->dev, "vaux3_1 regulator missing\n");
+-		return PTR_ERR(beagle_mt9t111_1_8v1);
++		return PTR_ERR(beagle_mt9v113_1_8v1);
+ 	}
+-	beagle_mt9t111_1_8v2 = regulator_get(&pdev->dev, "vaux4_1");
+-	if (IS_ERR(beagle_mt9t111_1_8v2)) {
++	printk("%s:%d\n", __func__, __LINE__);
++	beagle_mt9v113_1_8v2 = regulator_get(&pdev->dev, "vaux4_1");
++	if (IS_ERR(beagle_mt9v113_1_8v2)) {
+ 		dev_err(&pdev->dev, "vaux4_1 regulator missing\n");
+-		regulator_put(beagle_mt9t111_1_8v1);
+-		return PTR_ERR(beagle_mt9t111_1_8v2);
++		regulator_put(beagle_mt9v113_1_8v1);
++		return PTR_ERR(beagle_mt9v113_1_8v2);
+ 	}
+ 
++	printk("%s:%d\n", __func__, __LINE__);
+ 	if (gpio_request(LEOPARD_RESET_GPIO, "cam_rst") != 0) {
+ 		dev_err(&pdev->dev, "Could not request GPIO %d",
+ 			LEOPARD_RESET_GPIO);
+-		regulator_put(beagle_mt9t111_1_8v2);
+-		regulator_put(beagle_mt9t111_1_8v1);
++		regulator_put(beagle_mt9v113_1_8v2);
++		regulator_put(beagle_mt9v113_1_8v1);
+ 		return -ENODEV;
+ 	}
+ 
++	printk("%s:%d\n", __func__, __LINE__);
+ 	/* set to output mode, default value 0 */
+ 	gpio_direction_output(LEOPARD_RESET_GPIO, 0);
+ 
+@@ -277,12 +281,13 @@ static int beagle_cam_probe(struct platform_device *pdev)
+ 
+ static int beagle_cam_remove(struct platform_device *pdev)
+ {
+-	if (regulator_is_enabled(beagle_mt9t111_1_8v1))
+-		regulator_disable(beagle_mt9t111_1_8v1);
+-	regulator_put(beagle_mt9t111_1_8v1);
+-	if (regulator_is_enabled(beagle_mt9t111_1_8v2))
+-		regulator_disable(beagle_mt9t111_1_8v2);
+-	regulator_put(beagle_mt9t111_1_8v2);
++	printk("%s:%d\n", __func__, __LINE__);
++	if (regulator_is_enabled(beagle_mt9v113_1_8v1))
++		regulator_disable(beagle_mt9v113_1_8v1);
++	regulator_put(beagle_mt9v113_1_8v1);
++	if (regulator_is_enabled(beagle_mt9v113_1_8v2))
++		regulator_disable(beagle_mt9v113_1_8v2);
++	regulator_put(beagle_mt9v113_1_8v2);
+ 
+ 	gpio_free(LEOPARD_RESET_GPIO);
+ 
+@@ -355,9 +360,12 @@ static struct platform_driver beagle_cam_driver = {
+  */
+ int __init omap3beaglelmb_init(void)
+ {
++	printk("%s:%d\n", __func__, __LINE__);
+ 	if (cpu_is_omap3630()) {
+-			platform_driver_register(&beagle_cam_driver);
++	printk("%s:%d\n", __func__, __LINE__);
++		platform_driver_register(&beagle_cam_driver);
+ 	}
+-			return 0;
++	printk("%s:%d\n", __func__, __LINE__);
++	return 0;
+ }
+ late_initcall(omap3beaglelmb_init);
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index 09e8459..6835c1a 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -71,10 +71,10 @@ static struct omap_opp * _omap35x_l3_rate_table         = NULL;
+ static struct omap_opp * _omap37x_l3_rate_table         = NULL;
+ #endif  /* CONFIG_PM */
+ 
+-#if defined(CONFIG_VIDEO_MT9T111) || defined(CONFIG_VIDEO_MT9T111_MODULE)
++#if defined(CONFIG_VIDEO_MT9V113) || defined(CONFIG_VIDEO_MT9V113_MODULE)
+ #include <media/v4l2-int-device.h>
+-#include <media/mt9t111.h>
+-extern struct mt9t111_platform_data mt9t111_pdata;
++#include <media/mt9v113.h>
++extern struct mt9v113_platform_data mt9v113_pdata;
+ #endif
+ 
+ #define GPMC_CS0_BASE  0x60
+@@ -159,7 +159,7 @@ static void __init omap3beagle_ks8851_init(void)
+ 		printk(KERN_ERR "could not obtain gpio for KS8851_IRQ\n");
+ 		return;
+ 	}
+-	
++
+ 	spi_register_board_info(omap3beagle_zippy2_spi_board_info,
+ 							ARRAY_SIZE(omap3beagle_zippy2_spi_board_info));
+ }
+@@ -369,9 +369,9 @@ static int beagle_twl_gpio_setup(struct device *dev,
+ 	 */
+ 
+ 	if (cpu_is_omap3630()) {
+-		/* Power on DVI, Serial and PWR led */ 
++		/* Power on DVI, Serial and PWR led */
+  		gpio_request(gpio + 1, "nDVI_PWR_EN");
+-		gpio_direction_output(gpio + 1, 0);	
++		gpio_direction_output(gpio + 1, 0);
+ 
+ 		/* Power on camera interface */
+ 		gpio_request(gpio + 2, "CAM_EN");
+@@ -560,7 +560,7 @@ static struct i2c_board_info __initdata beagle_i2c1_boardinfo[] = {
+ 	},
+ };
+ 
+-	
++
+ #if defined(CONFIG_EEPROM_AT24) || defined(CONFIG_EEPROM_AT24_MODULE)
+ #include <linux/i2c/at24.h>
+ 
+@@ -594,10 +594,10 @@ static struct i2c_board_info __initdata beagle_zippy_i2c2_boardinfo[] = {};
+ #endif
+ 
+ static struct i2c_board_info __initdata beagle_i2c2_boardinfo[] = {
+-#if defined(CONFIG_VIDEO_MT9T111) || defined(CONFIG_VIDEO_MT9T111_MODULE)
++#if defined(CONFIG_VIDEO_MT9V113) || defined(CONFIG_VIDEO_MT9V113_MODULE)
+ 	{
+-		I2C_BOARD_INFO("mt9t111", MT9T111_I2C_ADDR),
+-		.platform_data	= &mt9t111_pdata,
++		I2C_BOARD_INFO("mt9v113", MT9V113_I2C_ADDR),
++		.platform_data	= &mt9v113_pdata,
+ 	},
+ #endif
+ };
+@@ -606,7 +606,7 @@ static int __init omap3_beagle_i2c_init(void)
+ {
+ 	omap_register_i2c_bus(1, 2600, beagle_i2c1_boardinfo,
+ 			ARRAY_SIZE(beagle_i2c1_boardinfo));
+-	if(!strcmp(expansionboard_name, "zippy") || !strcmp(expansionboard_name, "zippy2")) 
++	if(!strcmp(expansionboard_name, "zippy") || !strcmp(expansionboard_name, "zippy2"))
+ 	{
+ 		printk(KERN_INFO "Beagle expansionboard: registering i2c2 bus for zippy/zippy2\n");
+ 		omap_register_i2c_bus(2, 400,  beagle_zippy_i2c2_boardinfo,
+@@ -681,7 +681,7 @@ static struct spi_board_info beaglefpga_mcspi_board_info[] = {
+ 		.modalias	= "spidev",
+ 		.max_speed_hz	= 48000000, //48 Mbps
+ 		.bus_num	= 4,
+-		.chip_select	= 0,	
++		.chip_select	= 0,
+ 		.mode = SPI_MODE_1,
+ 	},
+ };
+@@ -835,7 +835,7 @@ static void __init omap3_beagle_init(void)
+ 	/* REVISIT leave DVI powered down until it's needed ... */
+ 	gpio_direction_output(170, true);
+ 
+-	if(!strcmp(expansionboard_name, "zippy")) 
++	if(!strcmp(expansionboard_name, "zippy"))
+ 	{
+ 		printk(KERN_INFO "Beagle expansionboard: initializing enc28j60\n");
+ 		omap3beagle_enc28j60_init();
+@@ -843,8 +843,8 @@ static void __init omap3_beagle_init(void)
+ 		mmc[1].gpio_wp = 141;
+ 		mmc[1].gpio_cd = 162;
+ 	}
+-	
+-	if(!strcmp(expansionboard_name, "zippy2")) 
++
++	if(!strcmp(expansionboard_name, "zippy2"))
+ 	{
+ 		printk(KERN_INFO "Beagle expansionboard: initializing ks_8851\n");
+ 		omap3beagle_ks8851_init();
+@@ -885,7 +885,7 @@ static void __init omap3_beagle_init(void)
+ 	}
+ 
+ 	if(!strcmp(expansionboard_name, "beaglefpga"))
+-	{  
++	{
+ 		printk(KERN_INFO "Beagle expansionboard: Using McSPI for SPI\n");
+ 		beaglefpga_init_spi();
+ 	}
+diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
+index f67ed46..c14d758 100644
+--- a/drivers/media/video/Kconfig
++++ b/drivers/media/video/Kconfig
+@@ -329,6 +329,16 @@ config VIDEO_MT9V011
+ 	  mt0v011 1.3 Mpixel camera.  It currently only works with the
+ 	  em28xx driver.
+ 
++config VIDEO_MT9V113
++	tristate "Aptina MT9V113 VGA CMOS IMAGE SENSOR"
++	depends on VIDEO_V4L2 && I2C
++	---help---
++	  This is a Video4Linux2 sensor-level driver for the Aptina MT9V113
++	  image sensor.
++
++	  To compile this driver as a module, choose M here: the
++	  module will be called mt9v113.
++
+ config VIDEO_TCM825X
+ 	tristate "TCM825x camera sensor support"
+ 	depends on I2C && VIDEO_V4L2
+diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
+index 31688bf..763c157 100644
+--- a/drivers/media/video/Makefile
++++ b/drivers/media/video/Makefile
+@@ -75,6 +75,7 @@ obj-$(CONFIG_VIDEO_OV7670) 	+= ov7670.o
+ obj-$(CONFIG_VIDEO_TCM825X) += tcm825x.o
+ obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o
+ obj-$(CONFIG_VIDEO_MT9V011) += mt9v011.o
++obj-$(CONFIG_VIDEO_MT9V113) += mt9v113.o
+ 
+ obj-$(CONFIG_SOC_CAMERA_MT9M001)	+= mt9m001.o
+ obj-$(CONFIG_SOC_CAMERA_MT9M111)	+= mt9m111.o
+diff --git a/drivers/media/video/mt9v113.c b/drivers/media/video/mt9v113.c
+new file mode 100644
+index 0000000..755a88a
+--- /dev/null
++++ b/drivers/media/video/mt9v113.c
+@@ -0,0 +1,1522 @@
++/*
++ * drivers/media/video/mt9v113.c
++ *
++ * Based on TI TVP5146/47 decoder driver
++ *
++ *
++ * This package is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ */
++
++#include <linux/i2c.h>
++#include <linux/delay.h>
++#include <linux/videodev2.h>
++#include <media/v4l2-int-device.h>
++#include <media/mt9v113.h>
++#include <mach/hardware.h>
++#include <linux/io.h>
++
++#include "mt9v113_regs.h"
++
++/* Module Name */
++#define MT9V113_MODULE_NAME		"mt9v113"
++
++/* Private macros for TVP */
++#define I2C_RETRY_COUNT                 (5)
++#define LOCK_RETRY_COUNT                (5)
++#define LOCK_RETRY_DELAY                (200)
++
++/* Debug functions */
++static int debug = 1;
++module_param(debug, bool, 0644);
++MODULE_PARM_DESC(debug, "Debug level (0-1)");
++
++#define dump_reg(client, reg, val)				\
++	do {							\
++		val = mt9v113_read_reg(client, reg);		\
++		v4l_info(client, "Reg(0x%.2X): 0x%.2X\n", reg, val); \
++	} while (0)
++
++/**
++ * enum mt9v113_std - enum for supported standards
++ */
++enum mt9v113_std {
++	MT9V113_STD_VGA = 0,
++	MT9V113_STD_QVGA,
++	MT9V113_STD_INVALID
++};
++
++/**
++ * enum mt9v113_state - enum for different decoder states
++ */
++enum mt9v113_state {
++	STATE_NOT_DETECTED,
++	STATE_DETECTED
++};
++
++/**
++ * struct mt9v113_std_info - Structure to store standard informations
++ * @width: Line width in pixels
++ * @height:Number of active lines
++ * @video_std: Value to write in REG_VIDEO_STD register
++ * @standard: v4l2 standard structure information
++ */
++struct mt9v113_std_info {
++	unsigned long width;
++	unsigned long height;
++	u8 video_std;
++	struct v4l2_standard standard;
++};
++
++/**
++ * struct mt9v113_decoded - decoder object
++ * @v4l2_int_device: Slave handle
++ * @pdata: Board specific
++ * @client: I2C client data
++ * @id: Entry from I2C table
++ * @ver: Chip version
++ * @state: decoder state - detected or not-detected
++ * @pix: Current pixel format
++ * @num_fmts: Number of formats
++ * @fmt_list: Format list
++ * @current_std: Current standard
++ * @num_stds: Number of standards
++ * @std_list: Standards list
++ * @route: input and output routing at chip level
++ */
++struct mt9v113_decoder {
++	struct v4l2_int_device *v4l2_int_device;
++	const struct mt9v113_platform_data *pdata;
++	struct i2c_client *client;
++
++	struct i2c_device_id *id;
++
++	int ver;
++	enum mt9v113_state state;
++
++	struct v4l2_pix_format pix;
++	int num_fmts;
++	const struct v4l2_fmtdesc *fmt_list;
++
++	enum mt9v113_std current_std;
++	int num_stds;
++	struct mt9v113_std_info *std_list;
++
++	struct v4l2_routing route;
++};
++
++/* MT9V113 register set for VGA mode */
++static struct mt9v113_reg mt9v113_vga_reg[] = {
++	{TOK_WRITE, 0x098C, 0x2739},
++	{TOK_WRITE, 0x0990, 0x0000},
++	{TOK_WRITE, 0x098C, 0x273B},
++	{TOK_WRITE, 0x0990, 0x027F},
++	{TOK_WRITE, 0x098C, 0x273D},
++	{TOK_WRITE, 0x0990, 0x0000},
++	{TOK_WRITE, 0x098C, 0x273F},
++	{TOK_WRITE, 0x0990, 0x01DF},
++	{TOK_WRITE, 0x098C, 0x2703},
++	{TOK_WRITE, 0x0990, 0x0280},
++	{TOK_WRITE, 0x098C, 0x2705},
++	{TOK_WRITE, 0x0990, 0x01E0},
++	{TOK_WRITE, 0x098C, 0xA103},
++	{TOK_WRITE, 0x0990, 0x0005},
++	{TOK_DELAY, 0, 100},
++	{TOK_TERM, 0, 0},
++};
++
++/* MT9V113 default register values */
++static struct mt9v113_reg mt9v113_reg_list[] = {
++	{TOK_WRITE, 0x0018, 0x4028},
++	{TOK_DELAY, 0, 100},
++	{TOK_WRITE, 0x001A, 0x0011},
++	{TOK_WRITE, 0x001A, 0x0010},
++	{TOK_WRITE, 0x0018, 0x4028},
++	{TOK_DELAY, 0, 100},
++	{TOK_WRITE, 0x098C, 0x02F0},
++	{TOK_WRITE, 0x0990, 0x0000},
++	{TOK_WRITE, 0x098C, 0x02F2},
++	{TOK_WRITE, 0x0990, 0x0210},
++	{TOK_WRITE, 0x098C, 0x02F4},
++	{TOK_WRITE, 0x0990, 0x001A},
++	{TOK_WRITE, 0x098C, 0x2145},
++	{TOK_WRITE, 0x0990, 0x02F4},
++	{TOK_WRITE, 0x098C, 0xA134},
++	{TOK_WRITE, 0x0990, 0x0001},
++	{TOK_WRITE, 0x31E0, 0x0001},
++	{TOK_WRITE, 0x001A, 0x0210},
++	{TOK_WRITE, 0x001E, 0x0777},
++	{TOK_WRITE, 0x0016, 0x42DF},
++	{TOK_WRITE, 0x0014, 0x2145},
++	{TOK_WRITE, 0x0014, 0x2145},
++	{TOK_WRITE, 0x0010, 0x0431},
++	{TOK_WRITE, 0x0012, 0x0000},
++	{TOK_WRITE, 0x0014, 0x244B},
++	{TOK_WRITE, 0x0014, 0x304B},
++	{TOK_DELAY, 0, 100},
++	{TOK_WRITE, 0x0014, 0xB04A},
++	{TOK_WRITE, 0x098C, 0xAB1F},
++	{TOK_WRITE, 0x0990, 0x00C7},
++	{TOK_WRITE, 0x098C, 0xAB31},
++	{TOK_WRITE, 0x0990, 0x001E},
++	{TOK_WRITE, 0x098C, 0x274F},
++	{TOK_WRITE, 0x0990, 0x0004},
++	{TOK_WRITE, 0x098C, 0x2741},
++	{TOK_WRITE, 0x0990, 0x0004},
++	{TOK_WRITE, 0x098C, 0xAB20},
++	{TOK_WRITE, 0x0990, 0x0054},
++	{TOK_WRITE, 0x098C, 0xAB21},
++	{TOK_WRITE, 0x0990, 0x0046},
++	{TOK_WRITE, 0x098C, 0xAB22},
++	{TOK_WRITE, 0x0990, 0x0002},
++	{TOK_WRITE, 0x098C, 0xAB24},
++	{TOK_WRITE, 0x0990, 0x0005},
++	{TOK_WRITE, 0x098C, 0x2B28},
++	{TOK_WRITE, 0x0990, 0x170C},
++	{TOK_WRITE, 0x098C, 0x2B2A},
++	{TOK_WRITE, 0x0990, 0x3E80},
++	{TOK_WRITE, 0x3210, 0x09A8},
++	{TOK_WRITE, 0x098C, 0x2306},
++	{TOK_WRITE, 0x0990, 0x0315},
++	{TOK_WRITE, 0x098C, 0x2308},
++	{TOK_WRITE, 0x0990, 0xFDDC},
++	{TOK_WRITE, 0x098C, 0x230A},
++	{TOK_WRITE, 0x0990, 0x003A},
++	{TOK_WRITE, 0x098C, 0x230C},
++	{TOK_WRITE, 0x0990, 0xFF58},
++	{TOK_WRITE, 0x098C, 0x230E},
++	{TOK_WRITE, 0x0990, 0x02B7},
++	{TOK_WRITE, 0x098C, 0x2310},
++	{TOK_WRITE, 0x0990, 0xFF31},
++	{TOK_WRITE, 0x098C, 0x2312},
++	{TOK_WRITE, 0x0990, 0xFF4C},
++	{TOK_WRITE, 0x098C, 0x2314},
++	{TOK_WRITE, 0x0990, 0xFE4C},
++	{TOK_WRITE, 0x098C, 0x2316},
++	{TOK_WRITE, 0x0990, 0x039E},
++	{TOK_WRITE, 0x098C, 0x2318},
++	{TOK_WRITE, 0x0990, 0x001C},
++	{TOK_WRITE, 0x098C, 0x231A},
++	{TOK_WRITE, 0x0990, 0x0039},
++	{TOK_WRITE, 0x098C, 0x231C},
++	{TOK_WRITE, 0x0990, 0x007F},
++	{TOK_WRITE, 0x098C, 0x231E},
++	{TOK_WRITE, 0x0990, 0xFF77},
++	{TOK_WRITE, 0x098C, 0x2320},
++	{TOK_WRITE, 0x0990, 0x000A},
++	{TOK_WRITE, 0x098C, 0x2322},
++	{TOK_WRITE, 0x0990, 0x0020},
++	{TOK_WRITE, 0x098C, 0x2324},
++	{TOK_WRITE, 0x0990, 0x001B},
++	{TOK_WRITE, 0x098C, 0x2326},
++	{TOK_WRITE, 0x0990, 0xFFC6},
++	{TOK_WRITE, 0x098C, 0x2328},
++	{TOK_WRITE, 0x0990, 0x0086},
++	{TOK_WRITE, 0x098C, 0x232A},
++	{TOK_WRITE, 0x0990, 0x00B5},
++	{TOK_WRITE, 0x098C, 0x232C},
++	{TOK_WRITE, 0x0990, 0xFEC3},
++	{TOK_WRITE, 0x098C, 0x232E},
++	{TOK_WRITE, 0x0990, 0x0001},
++	{TOK_WRITE, 0x098C, 0x2330},
++	{TOK_WRITE, 0x0990, 0xFFEF},
++	{TOK_WRITE, 0x098C, 0xA348},
++	{TOK_WRITE, 0x0990, 0x0008},
++	{TOK_WRITE, 0x098C, 0xA349},
++	{TOK_WRITE, 0x0990, 0x0002},
++	{TOK_WRITE, 0x098C, 0xA34A},
++	{TOK_WRITE, 0x0990, 0x0090},
++	{TOK_WRITE, 0x098C, 0xA34B},
++	{TOK_WRITE, 0x0990, 0x00FF},
++	{TOK_WRITE, 0x098C, 0xA34C},
++	{TOK_WRITE, 0x0990, 0x0075},
++	{TOK_WRITE, 0x098C, 0xA34D},
++	{TOK_WRITE, 0x0990, 0x00EF},
++	{TOK_WRITE, 0x098C, 0xA351},
++	{TOK_WRITE, 0x0990, 0x0000},
++	{TOK_WRITE, 0x098C, 0xA352},
++	{TOK_WRITE, 0x0990, 0x007F},
++	{TOK_WRITE, 0x098C, 0xA354},
++	{TOK_WRITE, 0x0990, 0x0043},
++	{TOK_WRITE, 0x098C, 0xA355},
++	{TOK_WRITE, 0x0990, 0x0001},
++	{TOK_WRITE, 0x098C, 0xA35D},
++	{TOK_WRITE, 0x0990, 0x0078},
++	{TOK_WRITE, 0x098C, 0xA35E},
++	{TOK_WRITE, 0x0990, 0x0086},
++	{TOK_WRITE, 0x098C, 0xA35F},
++	{TOK_WRITE, 0x0990, 0x007E},
++	{TOK_WRITE, 0x098C, 0xA360},
++	{TOK_WRITE, 0x0990, 0x0082},
++	{TOK_WRITE, 0x098C, 0x2361},
++	{TOK_WRITE, 0x0990, 0x0040},
++	{TOK_WRITE, 0x098C, 0xA363},
++	{TOK_WRITE, 0x0990, 0x00D2},
++	{TOK_WRITE, 0x098C, 0xA364},
++	{TOK_WRITE, 0x0990, 0x00F6},
++	{TOK_WRITE, 0x098C, 0xA302},
++	{TOK_WRITE, 0x0990, 0x0000},
++	{TOK_WRITE, 0x098C, 0xA303},
++	{TOK_WRITE, 0x0990, 0x00EF},
++	{TOK_WRITE, 0x098C, 0xAB20},
++	{TOK_WRITE, 0x0990, 0x0024},
++	{TOK_WRITE, 0x098C, 0xA103},
++	{TOK_WRITE, 0x0990, 0x0006},
++	{TOK_DELAY, 0, 100},
++	{TOK_WRITE, 0x098C, 0xA103},
++	{TOK_WRITE, 0x0990, 0x0005},
++	{TOK_DELAY, 0, 100},
++	{TOK_WRITE, 0x098C, 0x222D},
++	{TOK_WRITE, 0x0990, 0x0088},
++	{TOK_WRITE, 0x098C, 0xA408},
++	{TOK_WRITE, 0x0990, 0x0020},
++	{TOK_WRITE, 0x098C, 0xA409},
++	{TOK_WRITE, 0x0990, 0x0023},
++	{TOK_WRITE, 0x098C, 0xA40A},
++	{TOK_WRITE, 0x0990, 0x0027},
++	{TOK_WRITE, 0x098C, 0xA40B},
++	{TOK_WRITE, 0x0990, 0x002A},
++	{TOK_WRITE, 0x098C, 0x2411},
++	{TOK_WRITE, 0x0990, 0x0088},
++	{TOK_WRITE, 0x098C, 0x2413},
++	{TOK_WRITE, 0x0990, 0x00A4},
++	{TOK_WRITE, 0x098C, 0x2415},
++	{TOK_WRITE, 0x0990, 0x0088},
++	{TOK_WRITE, 0x098C, 0x2417},
++	{TOK_WRITE, 0x0990, 0x00A4},
++	{TOK_WRITE, 0x098C, 0xA404},
++	{TOK_WRITE, 0x0990, 0x0010},
++	{TOK_WRITE, 0x098C, 0xA40D},
++	{TOK_WRITE, 0x0990, 0x0002},
++	{TOK_WRITE, 0x098C, 0xA40E},
++	{TOK_WRITE, 0x0990, 0x0003},
++	{TOK_WRITE, 0x098C, 0xA103},
++	{TOK_WRITE, 0x0990, 0x0006},
++	{TOK_DELAY, 0, 100},
++	/* test pattern all white*/
++	/* {TOK_WRITE, 0x098C, 0xA766},
++	{TOK_WRITE, 0x0990, 0x0001},
++	*/
++	{TOK_WRITE, 0x098C, 0xA103},
++	{TOK_WRITE, 0x0990, 0x0005},
++	{TOK_DELAY, 0, 100},
++	{TOK_TERM, 0, 0},
++};
++
++/* List of image formats supported by mt9v113
++ * Currently we are using 8 bit mode only, but can be
++ * extended to 10/20 bit mode.
++ */
++static const struct v4l2_fmtdesc mt9v113_fmt_list[] = {
++	{
++	 .index = 0,
++	 .type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
++	 .flags = 0,
++	 .description = "8-bit UYVY 4:2:2 Format",
++	 .pixelformat = V4L2_PIX_FMT_UYVY,
++	},
++};
++
++/*
++ * Supported standards -
++ *
++ * Currently supports two standards only, need to add support for rest of the
++ * modes, like SECAM, etc...
++ */
++static struct mt9v113_std_info mt9v113_std_list[] = {
++	/* Standard: STD_NTSC_MJ */
++	[MT9V113_STD_VGA] = {
++	 .width = VGA_NUM_ACTIVE_PIXELS,
++	 .height = VGA_NUM_ACTIVE_LINES,
++	 .video_std = MT9V113_IMAGE_STD_VGA,
++	 .standard = {
++		      .index = 0,
++		      .id = MT9V113_IMAGE_STD_VGA,
++		      .name = "VGA",
++		      .frameperiod = {1001, 30000},
++		      .framelines = 480
++		     },
++	/* Standard: STD_PAL_BDGHIN */
++	},
++	[MT9V113_STD_QVGA] = {
++	 .width = QVGA_NUM_ACTIVE_PIXELS,
++	 .height = QVGA_NUM_ACTIVE_LINES,
++	 .video_std = MT9V113_IMAGE_STD_QVGA,
++	 .standard = {
++		      .index = 1,
++		      .id = MT9V113_IMAGE_STD_QVGA,
++		      .name = "QVGA",
++		      .frameperiod = {1001, 30000},
++		      .framelines = 320
++		     },
++	},
++	/* Standard: need to add for additional standard */
++};
++/*
++ * Control structure for Auto Gain
++ *     This is temporary data, will get replaced once
++ *     v4l2_ctrl_query_fill supports it.
++ */
++static const struct v4l2_queryctrl mt9v113_autogain_ctrl = {
++	.id = V4L2_CID_AUTOGAIN,
++	.name = "Gain, Automatic",
++	.type = V4L2_CTRL_TYPE_BOOLEAN,
++	.minimum = 0,
++	.maximum = 1,
++	.step = 1,
++	.default_value = 1,
++};
++
++static int mt9v113_read_reg(struct i2c_client *client, unsigned short reg)
++{
++	int err = 0;
++	struct i2c_msg msg[1];
++	unsigned char data[2];
++	unsigned short val = 0;
++
++	if (!client->adapter) {
++		err = -ENODEV;
++		return err;
++	}else {
++		// TODO: addr should be set up where else
++		msg->addr = MT9V113_I2C_ADDR;//client->addr;
++		msg->flags = 0;
++		msg->len = I2C_TWO_BYTE_TRANSFER;
++		msg->buf = data;
++		data[0] = (reg & I2C_TXRX_DATA_MASK_UPPER) >>
++			    I2C_TXRX_DATA_SHIFT;
++		data[1] = (reg & I2C_TXRX_DATA_MASK);
++		err = i2c_transfer(client->adapter, msg, 1);
++		if (err >= 0) {
++			msg->flags = I2C_M_RD;
++			msg->len = I2C_TWO_BYTE_TRANSFER;	/* 2 byte read */
++			err = i2c_transfer(client->adapter, msg, 1);
++			if (err >= 0) {
++				val = ((data[0] & I2C_TXRX_DATA_MASK)
++					<< I2C_TXRX_DATA_SHIFT)
++				    | (data[1] & I2C_TXRX_DATA_MASK);
++			}
++		}
++	}
++	return (int)(0x0000ffff & val);
++}
++
++
++
++static int mt9v113_write_reg(struct i2c_client *client, unsigned short reg, unsigned short val)
++{
++	int err = 0;
++	int trycnt = 0;
++
++	struct i2c_msg msg[1];
++	unsigned char data[4];
++	err = -1;
++
++	v4l_dbg(1, debug, client,
++		 "mt9v113_write_reg reg=0x%x, val=0x%x\n",
++		 reg,val);
++
++	while ((err < 0) && (trycnt < I2C_RETRY_COUNT)) {
++		trycnt++;
++		if (!client->adapter) {
++			err = -ENODEV;
++		} else {
++			// TODO: addr should be set up where else
++			msg->addr = MT9V113_I2C_ADDR;//client->addr;
++			msg->flags = 0;
++			msg->len = I2C_FOUR_BYTE_TRANSFER;
++			msg->buf = data;
++			data[0] = (reg & I2C_TXRX_DATA_MASK_UPPER) >>
++			    I2C_TXRX_DATA_SHIFT;
++			data[1] = (reg & I2C_TXRX_DATA_MASK);
++			data[2] = (val & I2C_TXRX_DATA_MASK_UPPER) >>
++			    I2C_TXRX_DATA_SHIFT;
++			data[3] = (val & I2C_TXRX_DATA_MASK);
++			err = i2c_transfer(client->adapter, msg, 1);
++		}
++	}
++	if (err < 0) {
++		printk(KERN_INFO "\n I2C write failed");
++	}
++	return err;
++}
++
++/* configure mux, for DM355 EVM only */
++#ifndef CONFIG_MACH_DM355_LEOPARD
++static int mt9v113_en_mux(struct i2c_client *client)
++{
++	int err = 0;
++	int trycnt = 0;
++	/* unsigned short readval = 0;*/
++
++	struct i2c_msg msg[1];
++	unsigned char data[4];
++	err = -1;
++	printk(KERN_INFO
++		       "\n entering mt9v113_en_mux \n");
++
++	while ((err < 0) && (trycnt < 5)) {
++		trycnt++;
++		if (!client->adapter) {
++			err = -ENODEV;
++		} else {
++			msg->addr = 0x25;
++			msg->flags = 0;
++			msg->len = I2C_TWO_BYTE_TRANSFER;
++			msg->buf = data;
++			data[0] = (unsigned char)(0x08 & I2C_TXRX_DATA_MASK);
++			data[1] = (unsigned char)(0x80 & I2C_TXRX_DATA_MASK);
++
++			err = i2c_transfer(client->adapter, msg, 1);
++			if (err < 0) {
++				printk(KERN_INFO
++				       "\n ERROR in ECP  register write\n");
++			}
++		}
++	}
++	if (err < 0) {
++		printk(KERN_INFO "\n I2C write failed");
++	}
++	return err;
++}
++#endif
++
++/*
++ * mt9v113_write_regs : Initializes a list of registers
++ *		if token is TOK_TERM, then entire write operation terminates
++ *		if token is TOK_DELAY, then a delay of 'val' msec is introduced
++ *		if token is TOK_SKIP, then the register write is skipped
++ *		if token is TOK_WRITE, then the register write is performed
++ *
++ * reglist - list of registers to be written
++ * Returns zero if successful, or non-zero otherwise.
++ */
++static int mt9v113_write_regs(struct i2c_client *client,
++			      const struct mt9v113_reg reglist[])
++{
++	int err;
++	const struct mt9v113_reg *next = reglist;
++
++	for (; next->token != TOK_TERM; next++) {
++		if (next->token == TOK_DELAY) {
++			msleep(next->val);
++			continue;
++		}
++
++		if (next->token == TOK_SKIP)
++			continue;
++
++		err = mt9v113_write_reg(client, next->reg, next->val);
++		if (err < 0) {
++			v4l_err(client, "Write failed. Err[%d]\n", err);
++			return err;
++		}
++	}
++	return 0;
++}
++
++/*
++ * mt9v113_get_current_std:
++ * Returns the current standard
++ */
++static enum mt9v113_std mt9v113_get_current_std(struct mt9v113_decoder
++						*decoder)
++{
++	return MT9V113_STD_VGA;
++}
++
++/*
++ * Configure the mt9v113 with the current register settings
++ * Returns zero if successful, or non-zero otherwise.
++ */
++static int mt9v113_configure(struct mt9v113_decoder *decoder)
++{
++	int err;
++
++	/* common register initialization */
++	err =
++	    mt9v113_write_regs(decoder->client, mt9v113_reg_list);
++	if (err)
++		return err;
++
++//	if (debug)
++//		mt9v113_reg_dump(decoder);
++
++	return 0;
++}
++
++/*
++ * Configure the MT9V113 to VGA mode
++ * Returns zero if successful, or non-zero otherwise.
++ */
++static int mt9v113_vga_mode(struct mt9v113_decoder *decoder)
++{
++	int err;
++
++	err =
++	    mt9v113_write_regs(decoder->client, mt9v113_vga_reg);
++	if (err)
++		return err;
++
++	return 0;
++}
++
++
++/*
++ * Detect if an mt9v113 is present, and if so which revision.
++ * A device is considered to be detected if the chip ID (LSB and MSB)
++ * registers match the expected values.
++ * Any value of the rom version register is accepted.
++ * Returns ENODEV error number if no device is detected, or zero
++ * if a device is detected.
++ */
++static int mt9v113_detect(struct mt9v113_decoder *decoder)
++{
++	unsigned short val=0;
++
++#ifndef CONFIG_MACH_DM355_LEOPARD
++//	mt9v113_en_mux(decoder->client);
++#endif
++
++	val = mt9v113_read_reg(decoder->client, REG_CHIP_ID);
++
++	v4l_dbg(1, debug, decoder->client,
++		 "chip id detected 0x%x\n",
++		 val);
++
++	if (MT9V113_CHIP_ID != val) {
++		/* We didn't read the values we expected, so this must not be
++		 * MT9V113.
++		 */
++		v4l_err(decoder->client,
++			"chip id mismatch read 0x%x, expecting 0x%x\n", val, MT9V113_CHIP_ID);
++		return -ENODEV;
++	}
++
++	decoder->ver = val;
++	decoder->state = STATE_DETECTED;
++
++	v4l_info(decoder->client,
++			"%s found at 0x%x (%s)\n", decoder->client->name,
++			decoder->client->addr << 1,
++			decoder->client->adapter->name);
++
++	return 0;
++}
++
++/*
++ * Following are decoder interface functions implemented by
++ * mt9v113 decoder driver.
++ */
++
++/**
++ * ioctl_querystd - V4L2 decoder interface handler for VIDIOC_QUERYSTD ioctl
++ * @s: pointer to standard V4L2 device structure
++ * @std_id: standard V4L2 std_id ioctl enum
++ *
++ * Returns the current standard detected by mt9v113. If no active input is
++ * detected, returns -EINVAL
++ */
++static int ioctl_querystd(struct v4l2_int_device *s, v4l2_std_id *std_id)
++{
++	struct mt9v113_decoder *decoder = s->priv;
++	enum mt9v113_std current_std;
++
++	if (std_id == NULL)
++		return -EINVAL;
++
++	/* get the current standard */
++	current_std = mt9v113_get_current_std(decoder);
++	if (current_std == MT9V113_IMAGE_STD_INVALID)
++		return -EINVAL;
++
++	decoder->current_std = current_std;
++	*std_id = decoder->std_list[current_std].standard.id;
++
++	v4l_dbg(1, debug, decoder->client, "Current STD: %s",
++			decoder->std_list[current_std].standard.name);
++	return 0;
++}
++
++/**
++ * ioctl_s_std - V4L2 decoder interface handler for VIDIOC_S_STD ioctl
++ * @s: pointer to standard V4L2 device structure
++ * @std_id: standard V4L2 v4l2_std_id ioctl enum
++ *
++ * If std_id is supported, sets the requested standard. Otherwise, returns
++ * -EINVAL
++ */
++static int ioctl_s_std(struct v4l2_int_device *s, v4l2_std_id *std_id)
++{
++	struct mt9v113_decoder *decoder = s->priv;
++	int err, i;
++
++	if (std_id == NULL)
++		return -EINVAL;
++
++	for (i = 0; i < decoder->num_stds; i++)
++		if (*std_id & decoder->std_list[i].standard.id)
++			break;
++
++	if ((i == decoder->num_stds) || (i == MT9V113_STD_INVALID))
++		return -EINVAL;
++
++	err = mt9v113_write_reg(decoder->client, REG_VIDEO_STD,
++				decoder->std_list[i].video_std);
++	if (err)
++		return err;
++
++	decoder->current_std = i;
++	mt9v113_reg_list[REG_VIDEO_STD].val = decoder->std_list[i].video_std;
++
++	v4l_dbg(1, debug, decoder->client, "Standard set to: %s",
++			decoder->std_list[i].standard.name);
++	return 0;
++}
++
++/**
++ * ioctl_s_routing - V4L2 decoder interface handler for VIDIOC_S_INPUT ioctl
++ * @s: pointer to standard V4L2 device structure
++ * @index: number of the input
++ *
++ * If index is valid, selects the requested input. Otherwise, returns -EINVAL if
++ * the input is not supported or there is no active signal present in the
++ * selected input.
++ */
++static int ioctl_s_routing(struct v4l2_int_device *s,
++				struct v4l2_routing *route)
++{
++	return 0;
++}
++
++/**
++ * ioctl_queryctrl - V4L2 decoder interface handler for VIDIOC_QUERYCTRL ioctl
++ * @s: pointer to standard V4L2 device structure
++ * @qctrl: standard V4L2 v4l2_queryctrl structure
++ *
++ * If the requested control is supported, returns the control information.
++ * Otherwise, returns -EINVAL if the control is not supported.
++ */
++static int
++ioctl_queryctrl(struct v4l2_int_device *s, struct v4l2_queryctrl *qctrl)
++{
++	struct mt9v113_decoder *decoder = s->priv;
++	int err = -EINVAL;
++
++	if (qctrl == NULL)
++		return err;
++
++	switch (qctrl->id) {
++	case V4L2_CID_BRIGHTNESS:
++		/* Brightness supported is same as standard one (0-255),
++		 * so make use of standard API provided.
++		 */
++		err = v4l2_ctrl_query_fill(qctrl, 0, 255, 1, 128);
++		break;
++	case V4L2_CID_CONTRAST:
++	case V4L2_CID_SATURATION:
++		/* Saturation and Contrast supported is -
++		 *	Contrast: 0 - 255 (Default - 128)
++		 *	Saturation: 0 - 255 (Default - 128)
++		 */
++		err = v4l2_ctrl_query_fill(qctrl, 0, 255, 1, 128);
++		break;
++	case V4L2_CID_HUE:
++		/* Hue Supported is -
++		 *	Hue - -180 - +180 (Default - 0, Step - +180)
++		 */
++		err = v4l2_ctrl_query_fill(qctrl, -180, 180, 180, 0);
++		break;
++	case V4L2_CID_AUTOGAIN:
++		/* Autogain is either 0 or 1*/
++		memcpy(qctrl, &mt9v113_autogain_ctrl,
++				sizeof(struct v4l2_queryctrl));
++		err = 0;
++		break;
++	default:
++		v4l_err(decoder->client,
++			"invalid control id %d\n", qctrl->id);
++		return err;
++	}
++
++	v4l_dbg(1, debug, decoder->client,
++			"Query Control: %s : Min - %d, Max - %d, Def - %d",
++			qctrl->name,
++			qctrl->minimum,
++			qctrl->maximum,
++			qctrl->default_value);
++
++	return err;
++}
++
++/**
++ * ioctl_g_ctrl - V4L2 decoder interface handler for VIDIOC_G_CTRL ioctl
++ * @s: pointer to standard V4L2 device structure
++ * @ctrl: pointer to v4l2_control structure
++ *
++ * If the requested control is supported, returns the control's current
++ * value from the decoder. Otherwise, returns -EINVAL if the control is not
++ * supported.
++ */
++static int
++ioctl_g_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl)
++{
++	struct mt9v113_decoder *decoder = s->priv;
++
++	if (ctrl == NULL)
++		return -EINVAL;
++
++	switch (ctrl->id) {
++	case V4L2_CID_BRIGHTNESS:
++		ctrl->value = mt9v113_reg_list[REG_BRIGHTNESS].val;
++		break;
++	case V4L2_CID_CONTRAST:
++		ctrl->value = mt9v113_reg_list[REG_CONTRAST].val;
++		break;
++	case V4L2_CID_SATURATION:
++		ctrl->value = mt9v113_reg_list[REG_SATURATION].val;
++		break;
++	case V4L2_CID_HUE:
++		ctrl->value = mt9v113_reg_list[REG_HUE].val;
++		if (ctrl->value == 0x7F)
++			ctrl->value = 180;
++		else if (ctrl->value == 0x80)
++			ctrl->value = -180;
++		else
++			ctrl->value = 0;
++
++		break;
++	case V4L2_CID_AUTOGAIN:
++		ctrl->value = mt9v113_reg_list[REG_AFE_GAIN_CTRL].val;
++		if ((ctrl->value & 0x3) == 3)
++			ctrl->value = 1;
++		else
++			ctrl->value = 0;
++
++		break;
++	default:
++		v4l_err(decoder->client,
++			"invalid control id %d\n", ctrl->id);
++		return -EINVAL;
++	}
++
++	v4l_dbg(1, debug, decoder->client,
++			"Get Control: ID - %d - %d",
++			ctrl->id, ctrl->value);
++	return 0;
++}
++
++/**
++ * ioctl_s_ctrl - V4L2 decoder interface handler for VIDIOC_S_CTRL ioctl
++ * @s: pointer to standard V4L2 device structure
++ * @ctrl: pointer to v4l2_control structure
++ *
++ * If the requested control is supported, sets the control's current
++ * value in HW. Otherwise, returns -EINVAL if the control is not supported.
++ */
++static int
++ioctl_s_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl)
++{
++	struct mt9v113_decoder *decoder = s->priv;
++	int err = -EINVAL, value;
++
++	if (ctrl == NULL)
++		return err;
++
++	value = (__s32) ctrl->value;
++
++	switch (ctrl->id) {
++	case V4L2_CID_BRIGHTNESS:
++		if (ctrl->value < 0 || ctrl->value > 255) {
++			v4l_err(decoder->client,
++					"invalid brightness setting %d\n",
++					ctrl->value);
++			return -ERANGE;
++		}
++		err = mt9v113_write_reg(decoder->client, REG_BRIGHTNESS,
++				value);
++		if (err)
++			return err;
++		mt9v113_reg_list[REG_BRIGHTNESS].val = value;
++		break;
++	case V4L2_CID_CONTRAST:
++		if (ctrl->value < 0 || ctrl->value > 255) {
++			v4l_err(decoder->client,
++					"invalid contrast setting %d\n",
++					ctrl->value);
++			return -ERANGE;
++		}
++		err = mt9v113_write_reg(decoder->client, REG_CONTRAST,
++				value);
++		if (err)
++			return err;
++		mt9v113_reg_list[REG_CONTRAST].val = value;
++		break;
++	case V4L2_CID_SATURATION:
++		if (ctrl->value < 0 || ctrl->value > 255) {
++			v4l_err(decoder->client,
++					"invalid saturation setting %d\n",
++					ctrl->value);
++			return -ERANGE;
++		}
++		err = mt9v113_write_reg(decoder->client, REG_SATURATION,
++				value);
++		if (err)
++			return err;
++		mt9v113_reg_list[REG_SATURATION].val = value;
++		break;
++	case V4L2_CID_HUE:
++		if (value == 180)
++			value = 0x7F;
++		else if (value == -180)
++			value = 0x80;
++		else if (value == 0)
++			value = 0;
++		else {
++			v4l_err(decoder->client,
++					"invalid hue setting %d\n",
++					ctrl->value);
++			return -ERANGE;
++		}
++		err = mt9v113_write_reg(decoder->client, REG_HUE,
++				value);
++		if (err)
++			return err;
++		mt9v113_reg_list[REG_HUE].val = value;
++		break;
++	case V4L2_CID_AUTOGAIN:
++		if (value == 1)
++			value = 0x0F;
++		else if (value == 0)
++			value = 0x0C;
++		else {
++			v4l_err(decoder->client,
++					"invalid auto gain setting %d\n",
++					ctrl->value);
++			return -ERANGE;
++		}
++		err = mt9v113_write_reg(decoder->client, REG_AFE_GAIN_CTRL,
++				value);
++		if (err)
++			return err;
++		mt9v113_reg_list[REG_AFE_GAIN_CTRL].val = value;
++		break;
++	default:
++		v4l_err(decoder->client,
++			"invalid control id %d\n", ctrl->id);
++		return err;
++	}
++
++	v4l_dbg(1, debug, decoder->client,
++			"Set Control: ID - %d - %d",
++			ctrl->id, ctrl->value);
++
++	return err;
++}
++
++/**
++ * ioctl_enum_fmt_cap - Implement the CAPTURE buffer VIDIOC_ENUM_FMT ioctl
++ * @s: pointer to standard V4L2 device structure
++ * @fmt: standard V4L2 VIDIOC_ENUM_FMT ioctl structure
++ *
++ * Implement the VIDIOC_ENUM_FMT ioctl to enumerate supported formats
++ */
++static int
++ioctl_enum_fmt_cap(struct v4l2_int_device *s, struct v4l2_fmtdesc *fmt)
++{
++	struct mt9v113_decoder *decoder = s->priv;
++	int index;
++
++	if (fmt == NULL)
++		return -EINVAL;
++
++	index = fmt->index;
++	if ((index >= decoder->num_fmts) || (index < 0))
++		return -EINVAL;	/* Index out of bound */
++
++	if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
++		return -EINVAL;	/* only capture is supported */
++
++	memcpy(fmt, &decoder->fmt_list[index],
++		sizeof(struct v4l2_fmtdesc));
++
++	v4l_dbg(1, debug, decoder->client,
++			"Current FMT: index - %d (%s)",
++			decoder->fmt_list[index].index,
++			decoder->fmt_list[index].description);
++	return 0;
++}
++
++/**
++ * ioctl_try_fmt_cap - Implement the CAPTURE buffer VIDIOC_TRY_FMT ioctl
++ * @s: pointer to standard V4L2 device structure
++ * @f: pointer to standard V4L2 VIDIOC_TRY_FMT ioctl structure
++ *
++ * Implement the VIDIOC_TRY_FMT ioctl for the CAPTURE buffer type. This
++ * ioctl is used to negotiate the image capture size and pixel format
++ * without actually making it take effect.
++ */
++static int
++ioctl_try_fmt_cap(struct v4l2_int_device *s, struct v4l2_format *f)
++{
++	struct mt9v113_decoder *decoder = s->priv;
++	int ifmt;
++	struct v4l2_pix_format *pix;
++	enum mt9v113_std current_std;
++
++	if (f == NULL)
++		return -EINVAL;
++
++	if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
++		f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
++
++	pix = &f->fmt.pix;
++
++	/* Calculate height and width based on current standard */
++	current_std = mt9v113_get_current_std(decoder);
++	if (current_std == MT9V113_STD_INVALID)
++		return -EINVAL;
++
++	decoder->current_std = current_std;
++	pix->width = decoder->std_list[current_std].width;
++	pix->height = decoder->std_list[current_std].height;
++
++	for (ifmt = 0; ifmt < decoder->num_fmts; ifmt++) {
++		if (pix->pixelformat ==
++			decoder->fmt_list[ifmt].pixelformat)
++			break;
++	}
++	if (ifmt == decoder->num_fmts)
++		ifmt = 0;	/* None of the format matched, select default */
++	pix->pixelformat = decoder->fmt_list[ifmt].pixelformat;
++
++	pix->field = V4L2_FIELD_NONE;
++	pix->bytesperline = pix->width * 2;
++	pix->sizeimage = pix->bytesperline * pix->height;
++	pix->colorspace = V4L2_COLORSPACE_SMPTE170M;
++	pix->priv = 0;
++
++	v4l_dbg(1, debug, decoder->client,
++			"Try FMT: pixelformat - %s, bytesperline - %d"
++			"Width - %d, Height - %d",
++			decoder->fmt_list[ifmt].description, pix->bytesperline,
++			pix->width, pix->height);
++	return 0;
++}
++
++/**
++ * ioctl_s_fmt_cap - V4L2 decoder interface handler for VIDIOC_S_FMT ioctl
++ * @s: pointer to standard V4L2 device structure
++ * @f: pointer to standard V4L2 VIDIOC_S_FMT ioctl structure
++ *
++ * If the requested format is supported, configures the HW to use that
++ * format, returns error code if format not supported or HW can't be
++ * correctly configured.
++ */
++static int
++ioctl_s_fmt_cap(struct v4l2_int_device *s, struct v4l2_format *f)
++{
++	struct mt9v113_decoder *decoder = s->priv;
++	struct v4l2_pix_format *pix;
++	int rval;
++
++	if (f == NULL)
++		return -EINVAL;
++
++	if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
++		return -EINVAL;	/* only capture is supported */
++
++	pix = &f->fmt.pix;
++	rval = ioctl_try_fmt_cap(s, f);
++	if (rval)
++		return rval;
++
++		decoder->pix = *pix;
++
++	return rval;
++}
++
++/**
++ * ioctl_g_fmt_cap - V4L2 decoder interface handler for ioctl_g_fmt_cap
++ * @s: pointer to standard V4L2 device structure
++ * @f: pointer to standard V4L2 v4l2_format structure
++ *
++ * Returns the decoder's current pixel format in the v4l2_format
++ * parameter.
++ */
++static int
++ioctl_g_fmt_cap(struct v4l2_int_device *s, struct v4l2_format *f)
++{
++	struct mt9v113_decoder *decoder = s->priv;
++
++	if (f == NULL)
++		return -EINVAL;
++
++	if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
++		return -EINVAL;	/* only capture is supported */
++
++	f->fmt.pix = decoder->pix;
++
++	v4l_dbg(1, debug, decoder->client,
++			"Current FMT: bytesperline - %d"
++			"Width - %d, Height - %d",
++			decoder->pix.bytesperline,
++			decoder->pix.width, decoder->pix.height);
++	return 0;
++}
++
++/**
++ * ioctl_g_parm - V4L2 decoder interface handler for VIDIOC_G_PARM ioctl
++ * @s: pointer to standard V4L2 device structure
++ * @a: pointer to standard V4L2 VIDIOC_G_PARM ioctl structure
++ *
++ * Returns the decoder's video CAPTURE parameters.
++ */
++static int
++ioctl_g_parm(struct v4l2_int_device *s, struct v4l2_streamparm *a)
++{
++	struct mt9v113_decoder *decoder = s->priv;
++	struct v4l2_captureparm *cparm;
++	enum mt9v113_std current_std;
++
++	if (a == NULL)
++		return -EINVAL;
++
++	if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
++		return -EINVAL;	/* only capture is supported */
++
++	memset(a, 0, sizeof(*a));
++	a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
++
++	/* get the current standard */
++	current_std = mt9v113_get_current_std(decoder);
++	if (current_std == MT9V113_STD_INVALID)
++		return -EINVAL;
++
++	decoder->current_std = current_std;
++
++	cparm = &a->parm.capture;
++	cparm->capability = V4L2_CAP_TIMEPERFRAME;
++	cparm->timeperframe =
++		decoder->std_list[current_std].standard.frameperiod;
++
++	return 0;
++}
++
++/**
++ * ioctl_s_parm - V4L2 decoder interface handler for VIDIOC_S_PARM ioctl
++ * @s: pointer to standard V4L2 device structure
++ * @a: pointer to standard V4L2 VIDIOC_S_PARM ioctl structure
++ *
++ * Configures the decoder to use the input parameters, if possible. If
++ * not possible, returns the appropriate error code.
++ */
++static int
++ioctl_s_parm(struct v4l2_int_device *s, struct v4l2_streamparm *a)
++{
++	struct mt9v113_decoder *decoder = s->priv;
++	struct v4l2_fract *timeperframe;
++	enum mt9v113_std current_std;
++
++	if (a == NULL)
++		return -EINVAL;
++
++	if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
++		return -EINVAL;	/* only capture is supported */
++
++	timeperframe = &a->parm.capture.timeperframe;
++
++	/* get the current standard */
++	current_std = mt9v113_get_current_std(decoder);
++	if (current_std == MT9V113_STD_INVALID)
++		return -EINVAL;
++
++	decoder->current_std = current_std;
++
++	*timeperframe =
++	    decoder->std_list[current_std].standard.frameperiod;
++
++	return 0;
++}
++
++/**
++ * ioctl_g_ifparm - V4L2 decoder interface handler for vidioc_int_g_ifparm_num
++ * @s: pointer to standard V4L2 device structure
++ * @p: pointer to standard V4L2 vidioc_int_g_ifparm_num ioctl structure
++ *
++ * Gets slave interface parameters.
++ * Calculates the required xclk value to support the requested
++ * clock parameters in p. This value is returned in the p
++ * parameter.
++ */
++static int ioctl_g_ifparm(struct v4l2_int_device *s, struct v4l2_ifparm *p)
++{
++	struct mt9v113_decoder *decoder = s->priv;
++	int rval;
++
++	if (p == NULL)
++		return -EINVAL;
++
++	if (NULL == decoder->pdata->ifparm)
++		return -EINVAL;
++
++	rval = decoder->pdata->ifparm(p);
++	if (rval) {
++		v4l_err(decoder->client, "g_ifparm.Err[%d]\n", rval);
++		return rval;
++	}
++
++	p->u.bt656.clock_curr = 27000000; // TODO: read clock rate from sensor
++
++	return 0;
++}
++
++/**
++ * ioctl_g_priv - V4L2 decoder interface handler for vidioc_int_g_priv_num
++ * @s: pointer to standard V4L2 device structure
++ * @p: void pointer to hold decoder's private data address
++ *
++ * Returns device's (decoder's) private data area address in p parameter
++ */
++static int ioctl_g_priv(struct v4l2_int_device *s, void *p)
++{
++	struct mt9v113_decoder *decoder = s->priv;
++
++	if (NULL == decoder->pdata->priv_data_set)
++		return -EINVAL;
++
++	return decoder->pdata->priv_data_set(p);
++}
++
++/**
++ * ioctl_s_power - V4L2 decoder interface handler for vidioc_int_s_power_num
++ * @s: pointer to standard V4L2 device structure
++ * @on: power state to which device is to be set
++ *
++ * Sets devices power state to requrested state, if possible.
++ */
++static int ioctl_s_power(struct v4l2_int_device *s, enum v4l2_power on)
++{
++	struct mt9v113_decoder *decoder = s->priv;
++	int err = 0;
++
++	switch (on) {
++	case V4L2_POWER_OFF:
++		/* Power Down Sequence */
++		err =
++		    mt9v113_write_reg(decoder->client, REG_OPERATION_MODE,
++					0x01);
++		/* Disable mux for mt9v113 data path */
++		if (decoder->pdata->power_set)
++			err |= decoder->pdata->power_set(s, on);
++		decoder->state = STATE_NOT_DETECTED;
++		break;
++
++	case V4L2_POWER_STANDBY:
++		if (decoder->pdata->power_set)
++			err = decoder->pdata->power_set(s, on);
++		break;
++
++	case V4L2_POWER_ON:
++		/* Enable mux for mt9v113 data path */
++		if ((decoder->pdata->power_set) &&
++				(decoder->state == STATE_NOT_DETECTED)) {
++
++			err = decoder->pdata->power_set(s, on);
++
++			/* Detect the sensor is not already detected */
++			err |= mt9v113_detect(decoder);
++			if (err) {
++				v4l_err(decoder->client,
++						"Unable to detect decoder\n");
++				return err;
++			}
++		}
++		// Only VGA mode for now
++		err |= mt9v113_vga_mode(decoder);
++		break;
++
++	default:
++		err = -ENODEV;
++		break;
++	}
++
++	return err;
++}
++
++/**
++ * ioctl_init - V4L2 decoder interface handler for VIDIOC_INT_INIT
++ * @s: pointer to standard V4L2 device structure
++ *
++ * Initialize the decoder device (calls mt9v113_configure())
++ */
++static int ioctl_init(struct v4l2_int_device *s)
++{
++//	struct mt9v113_decoder *decoder = s->priv;
++	int err = 0;
++
++	/* Set default standard to auto */
++	//mt9v113_reg_list[REG_VIDEO_STD].val =
++	//    VIDEO_STD_AUTO_SWITCH_BIT;
++//	err |= mt9v113_configure(decoder);
++//	err |= mt9v113_vga_mode(decoder);
++
++	return err;
++}
++
++/**
++ * ioctl_dev_exit - V4L2 decoder interface handler for vidioc_int_dev_exit_num
++ * @s: pointer to standard V4L2 device structure
++ *
++ * Delinitialise the dev. at slave detach. The complement of ioctl_dev_init.
++ */
++static int ioctl_dev_exit(struct v4l2_int_device *s)
++{
++	return 0;
++}
++
++/**
++ * ioctl_dev_init - V4L2 decoder interface handler for vidioc_int_dev_init_num
++ * @s: pointer to standard V4L2 device structure
++ *
++ * Initialise the device when slave attaches to the master. Returns 0 if
++ * mt9v113 device could be found, otherwise returns appropriate error.
++ */
++static int ioctl_dev_init(struct v4l2_int_device *s)
++{
++	struct mt9v113_decoder *decoder = s->priv;
++	int err;
++
++	printk("%s: %d\n", __func__, __LINE__);
++	err = mt9v113_detect(decoder);
++	if (err < 0) {
++		v4l_err(decoder->client,
++			"Unable to detect decoder\n");
++		return err;
++	}
++
++	v4l_info(decoder->client,
++		 "chip version 0x%.2x detected\n", decoder->ver);
++
++	err |= mt9v113_configure(decoder);
++	err |= mt9v113_vga_mode(decoder);
++
++	return 0;
++}
++
++static struct v4l2_int_ioctl_desc mt9v113_ioctl_desc[] = {
++	{vidioc_int_dev_init_num, (v4l2_int_ioctl_func*) ioctl_dev_init},
++	{vidioc_int_dev_exit_num, (v4l2_int_ioctl_func*) ioctl_dev_exit},
++	{vidioc_int_s_power_num, (v4l2_int_ioctl_func*) ioctl_s_power},
++	{vidioc_int_g_priv_num, (v4l2_int_ioctl_func*) ioctl_g_priv},
++	{vidioc_int_g_ifparm_num, (v4l2_int_ioctl_func*) ioctl_g_ifparm},
++	{vidioc_int_init_num, (v4l2_int_ioctl_func*) ioctl_init},
++	{vidioc_int_enum_fmt_cap_num,
++	 (v4l2_int_ioctl_func *) ioctl_enum_fmt_cap},
++	{vidioc_int_try_fmt_cap_num,
++	 (v4l2_int_ioctl_func *) ioctl_try_fmt_cap},
++	{vidioc_int_g_fmt_cap_num,
++	 (v4l2_int_ioctl_func *) ioctl_g_fmt_cap},
++	{vidioc_int_s_fmt_cap_num,
++	 (v4l2_int_ioctl_func *) ioctl_s_fmt_cap},
++	{vidioc_int_g_parm_num, (v4l2_int_ioctl_func *) ioctl_g_parm},
++	{vidioc_int_s_parm_num, (v4l2_int_ioctl_func *) ioctl_s_parm},
++	{vidioc_int_queryctrl_num,
++	 (v4l2_int_ioctl_func *) ioctl_queryctrl},
++	{vidioc_int_g_ctrl_num, (v4l2_int_ioctl_func *) ioctl_g_ctrl},
++	{vidioc_int_s_ctrl_num, (v4l2_int_ioctl_func *) ioctl_s_ctrl},
++	{vidioc_int_querystd_num, (v4l2_int_ioctl_func *) ioctl_querystd},
++	{vidioc_int_s_std_num, (v4l2_int_ioctl_func *) ioctl_s_std},
++	{vidioc_int_s_video_routing_num,
++		(v4l2_int_ioctl_func *) ioctl_s_routing},
++};
++
++static struct v4l2_int_slave mt9v113_slave = {
++	.ioctls = mt9v113_ioctl_desc,
++	.num_ioctls = ARRAY_SIZE(mt9v113_ioctl_desc),
++};
++
++static struct mt9v113_decoder mt9v113_dev = {
++	.state = STATE_NOT_DETECTED,
++
++	.fmt_list = mt9v113_fmt_list,
++	.num_fmts = ARRAY_SIZE(mt9v113_fmt_list),
++
++	.pix = {		/* Default to 8-bit YUV 422 */
++		.width = VGA_NUM_ACTIVE_PIXELS,
++		.height = VGA_NUM_ACTIVE_LINES,
++		.pixelformat = V4L2_PIX_FMT_UYVY,
++		.field = V4L2_FIELD_NONE,
++		.bytesperline = VGA_NUM_ACTIVE_PIXELS * 2,
++		.sizeimage =
++		VGA_NUM_ACTIVE_PIXELS * 2 * VGA_NUM_ACTIVE_LINES,
++		.colorspace = V4L2_COLORSPACE_SMPTE170M,
++		},
++
++	.current_std = MT9V113_STD_VGA,
++	.std_list = mt9v113_std_list,
++	.num_stds = ARRAY_SIZE(mt9v113_std_list),
++
++};
++
++static struct v4l2_int_device mt9v113_int_device = {
++	.module = THIS_MODULE,
++	.name = MT9V113_MODULE_NAME,
++	.priv = &mt9v113_dev,
++	.type = v4l2_int_type_slave,
++	.u = {
++	      .slave = &mt9v113_slave,
++	      },
++};
++
++/**
++ * mt9v113_probe - decoder driver i2c probe handler
++ * @client: i2c driver client device structure
++ *
++ * Register decoder as an i2c client device and V4L2
++ * device.
++ */
++static int
++mt9v113_probe(struct i2c_client *client, const struct i2c_device_id *id)
++{
++	struct mt9v113_decoder *decoder = &mt9v113_dev;
++	int err;
++
++	printk("%s: %d\n", __func__, __LINE__);
++	/* Check if the adapter supports the needed features */
++	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
++		return -EIO;
++
++	printk("%s: %d\n", __func__, __LINE__);
++	decoder->pdata = client->dev.platform_data;
++	if (!decoder->pdata) {
++		v4l_err(client, "No platform data!!\n");
++		return -ENODEV;
++	}
++	printk("%s: %d\n", __func__, __LINE__);
++	/*
++	 * Fetch platform specific data, and configure the
++	 * mt9v113_reg_list[] accordingly. Since this is one
++	 * time configuration, no need to preserve.
++	 */
++
++	/*mt9v113_reg_list[REG_OUTPUT_FORMATTER2].val |=
++			(decoder->pdata->clk_polarity << 1);
++	mt9v113_reg_list[REG_SYNC_CONTROL].val |=
++			((decoder->pdata->hs_polarity << 2) |
++			(decoder->pdata->vs_polarity << 3));
++	*/
++	/*
++	 * Save the id data, required for power up sequence
++	 */
++	decoder->id = (struct i2c_device_id *)id;
++	/* Attach to Master */
++	strcpy(mt9v113_int_device.u.slave->attach_to, decoder->pdata->master);
++	decoder->v4l2_int_device = &mt9v113_int_device;
++	decoder->client = client;
++	i2c_set_clientdata(client, decoder);
++
++	/* Register with V4L2 layer as slave device */
++	err = v4l2_int_device_register(decoder->v4l2_int_device);
++	if (err) {
++		i2c_set_clientdata(client, NULL);
++		v4l_err(client,
++			"Unable to register to v4l2. Err[%d]\n", err);
++
++	} else
++		v4l_info(client, "Registered to v4l2 master %s!!\n",
++				decoder->pdata->master);
++
++	return 0;
++}
++
++/**
++ * mt9v113_remove - decoder driver i2c remove handler
++ * @client: i2c driver client device structure
++ *
++ * Unregister decoder as an i2c client device and V4L2
++ * device. Complement of mt9v113_probe().
++ */
++static int __exit mt9v113_remove(struct i2c_client *client)
++{
++	struct mt9v113_decoder *decoder = i2c_get_clientdata(client);
++
++	if (!client->adapter)
++		return -ENODEV;	/* our client isn't attached */
++
++	v4l2_int_device_unregister(decoder->v4l2_int_device);
++	i2c_set_clientdata(client, NULL);
++
++	return 0;
++}
++/*
++ * mt9v113 Init/Power on Sequence
++ */
++static const struct mt9v113_reg mt9v113m_init_reg_seq[] = {
++	{TOK_WRITE, REG_OPERATION_MODE, 0x01},
++	{TOK_WRITE, REG_OPERATION_MODE, 0x00},
++};
++static const struct mt9v113_init_seq mt9v113m_init = {
++	.no_regs = ARRAY_SIZE(mt9v113m_init_reg_seq),
++	.init_reg_seq = mt9v113m_init_reg_seq,
++};
++/*
++ * I2C Device Table -
++ *
++ * name - Name of the actual device/chip.
++ * driver_data - Driver data
++ */
++static const struct i2c_device_id mt9v113_id[] = {
++	{"mt9v113", (unsigned long)&mt9v113m_init},
++	{},
++};
++
++MODULE_DEVICE_TABLE(i2c, mt9v113_id);
++
++static struct i2c_driver mt9v113_i2c_driver = {
++	.driver = {
++		   .name = MT9V113_MODULE_NAME,
++		   .owner = THIS_MODULE,
++		   },
++	.probe = mt9v113_probe,
++	.remove = __exit_p(mt9v113_remove),
++	.id_table = mt9v113_id,
++};
++
++/**
++ * mt9v113_init
++ *
++ * Module init function
++ */
++static int __init mt9v113_init(void)
++{
++	return i2c_add_driver(&mt9v113_i2c_driver);
++}
++
++/**
++ * mt9v113_cleanup
++ *
++ * Module exit function
++ */
++static void __exit mt9v113_cleanup(void)
++{
++	i2c_del_driver(&mt9v113_i2c_driver);
++}
++
++module_init(mt9v113_init);
++module_exit(mt9v113_cleanup);
++
++MODULE_AUTHOR("Texas Instruments");
++MODULE_DESCRIPTION("MT9V113 linux decoder driver");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/media/video/mt9v113_regs.h b/drivers/media/video/mt9v113_regs.h
+new file mode 100644
+index 0000000..64b065f
+--- /dev/null
++++ b/drivers/media/video/mt9v113_regs.h
+@@ -0,0 +1,294 @@
++/*
++ * drivers/media/video/mt9v113_regs.h
++ *
++ * Copyright (C) 2008 Texas Instruments Inc
++ * Author: Vaibhav Hiremath <hvaibhav@ti.com>
++ *
++ * Contributors:
++ *     Sivaraj R <sivaraj@ti.com>
++ *     Brijesh R Jadav <brijesh.j@ti.com>
++ *     Hardik Shah <hardik.shah@ti.com>
++ *     Manjunath Hadli <mrh@ti.com>
++ *     Karicheri Muralidharan <m-karicheri2@ti.com>
++ *
++ * This package is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ */
++
++#ifndef _MT9V113_REGS_H
++#define _MT9V113_REGS_H
++
++/*
++ * MT9V113 registers
++ */
++#define REG_CHIP_ID				(0x00)
++
++/*
++ * MT9V113 registers
++ */
++#define REG_INPUT_SEL			(0x00)
++#define REG_AFE_GAIN_CTRL		(0x01)
++#define REG_VIDEO_STD			(0x02)
++#define REG_OPERATION_MODE		(0x03)
++#define REG_AUTOSWITCH_MASK		(0x04)
++
++#define REG_COLOR_KILLER		(0x05)
++#define REG_LUMA_CONTROL1		(0x06)
++#define REG_LUMA_CONTROL2		(0x07)
++#define REG_LUMA_CONTROL3		(0x08)
++
++#define REG_BRIGHTNESS			(0x09)
++#define REG_CONTRAST			(0x0A)
++#define REG_SATURATION			(0x0B)
++#define REG_HUE				(0x0C)
++
++#define REG_CHROMA_CONTROL1		(0x0D)
++#define REG_CHROMA_CONTROL2		(0x0E)
++
++/* 0x0F Reserved */
++
++#define REG_COMP_PR_SATURATION		(0x10)
++#define REG_COMP_Y_CONTRAST		(0x11)
++#define REG_COMP_PB_SATURATION		(0x12)
++
++/* 0x13 Reserved */
++
++#define REG_COMP_Y_BRIGHTNESS		(0x14)
++
++/* 0x15 Reserved */
++
++#define REG_AVID_START_PIXEL_LSB	(0x16)
++#define REG_AVID_START_PIXEL_MSB	(0x17)
++#define REG_AVID_STOP_PIXEL_LSB		(0x18)
++#define REG_AVID_STOP_PIXEL_MSB		(0x19)
++
++#define REG_HSYNC_START_PIXEL_LSB	(0x1A)
++#define REG_HSYNC_START_PIXEL_MSB	(0x1B)
++#define REG_HSYNC_STOP_PIXEL_LSB	(0x1C)
++#define REG_HSYNC_STOP_PIXEL_MSB	(0x1D)
++
++#define REG_VSYNC_START_LINE_LSB	(0x1E)
++#define REG_VSYNC_START_LINE_MSB	(0x1F)
++#define REG_VSYNC_STOP_LINE_LSB		(0x20)
++#define REG_VSYNC_STOP_LINE_MSB		(0x21)
++
++#define REG_VBLK_START_LINE_LSB		(0x22)
++#define REG_VBLK_START_LINE_MSB		(0x23)
++#define REG_VBLK_STOP_LINE_LSB		(0x24)
++#define REG_VBLK_STOP_LINE_MSB		(0x25)
++
++/* 0x26 - 0x27 Reserved */
++
++#define REG_FAST_SWTICH_CONTROL		(0x28)
++
++/* 0x29 Reserved */
++
++#define REG_FAST_SWTICH_SCART_DELAY	(0x2A)
++
++/* 0x2B Reserved */
++
++#define REG_SCART_DELAY			(0x2C)
++#define REG_CTI_DELAY			(0x2D)
++#define REG_CTI_CONTROL			(0x2E)
++
++/* 0x2F - 0x31 Reserved */
++
++#define REG_SYNC_CONTROL		(0x32)
++#define REG_OUTPUT_FORMATTER1		(0x33)
++#define REG_OUTPUT_FORMATTER2		(0x34)
++#define REG_OUTPUT_FORMATTER3		(0x35)
++#define REG_OUTPUT_FORMATTER4		(0x36)
++#define REG_OUTPUT_FORMATTER5		(0x37)
++#define REG_OUTPUT_FORMATTER6		(0x38)
++#define REG_CLEAR_LOST_LOCK		(0x39)
++
++#define REG_STATUS1			(0x3A)
++#define REG_STATUS2			(0x3B)
++
++#define REG_AGC_GAIN_STATUS_LSB		(0x3C)
++#define REG_AGC_GAIN_STATUS_MSB		(0x3D)
++
++/* 0x3E Reserved */
++
++#define REG_VIDEO_STD_STATUS		(0x3F)
++#define REG_GPIO_INPUT1			(0x40)
++#define REG_GPIO_INPUT2			(0x41)
++
++/* 0x42 - 0x45 Reserved */
++
++#define REG_AFE_COARSE_GAIN_CH1		(0x46)
++#define REG_AFE_COARSE_GAIN_CH2		(0x47)
++#define REG_AFE_COARSE_GAIN_CH3		(0x48)
++#define REG_AFE_COARSE_GAIN_CH4		(0x49)
++
++#define REG_AFE_FINE_GAIN_PB_B_LSB	(0x4A)
++#define REG_AFE_FINE_GAIN_PB_B_MSB	(0x4B)
++#define REG_AFE_FINE_GAIN_Y_G_CHROMA_LSB	(0x4C)
++#define REG_AFE_FINE_GAIN_Y_G_CHROMA_MSB	(0x4D)
++#define REG_AFE_FINE_GAIN_PR_R_LSB	(0x4E)
++#define REG_AFE_FINE_GAIN_PR_R_MSB	(0x4F)
++#define REG_AFE_FINE_GAIN_CVBS_LUMA_LSB	(0x50)
++#define REG_AFE_FINE_GAIN_CVBS_LUMA_MSB	(0x51)
++
++/* 0x52 - 0x68 Reserved */
++
++#define REG_FBIT_VBIT_CONTROL1		(0x69)
++
++/* 0x6A - 0x6B Reserved */
++
++#define REG_BACKEND_AGC_CONTROL		(0x6C)
++
++/* 0x6D - 0x6E Reserved */
++
++#define REG_AGC_DECREMENT_SPEED_CONTROL	(0x6F)
++#define REG_ROM_VERSION			(0x70)
++
++/* 0x71 - 0x73 Reserved */
++
++#define REG_AGC_WHITE_PEAK_PROCESSING	(0x74)
++#define REG_FBIT_VBIT_CONTROL2		(0x75)
++#define REG_VCR_TRICK_MODE_CONTROL	(0x76)
++#define REG_HORIZONTAL_SHAKE_INCREMENT	(0x77)
++#define REG_AGC_INCREMENT_SPEED		(0x78)
++#define REG_AGC_INCREMENT_DELAY		(0x79)
++
++/* 0x7A - 0x7F Reserved */
++
++#define REG_CHIP_ID_MSB			(0x80)
++#define REG_CHIP_ID_LSB			(0x81)
++
++/* 0x82 Reserved */
++
++#define REG_CPLL_SPEED_CONTROL		(0x83)
++
++/* 0x84 - 0x96 Reserved */
++
++#define REG_STATUS_REQUEST		(0x97)
++
++/* 0x98 - 0x99 Reserved */
++
++#define REG_VERTICAL_LINE_COUNT_LSB	(0x9A)
++#define REG_VERTICAL_LINE_COUNT_MSB	(0x9B)
++
++/* 0x9C - 0x9D Reserved */
++
++#define REG_AGC_DECREMENT_DELAY		(0x9E)
++
++/* 0x9F - 0xB0 Reserved */
++
++#define REG_VDP_TTX_FILTER_1_MASK1	(0xB1)
++#define REG_VDP_TTX_FILTER_1_MASK2	(0xB2)
++#define REG_VDP_TTX_FILTER_1_MASK3	(0xB3)
++#define REG_VDP_TTX_FILTER_1_MASK4	(0xB4)
++#define REG_VDP_TTX_FILTER_1_MASK5	(0xB5)
++#define REG_VDP_TTX_FILTER_2_MASK1	(0xB6)
++#define REG_VDP_TTX_FILTER_2_MASK2	(0xB7)
++#define REG_VDP_TTX_FILTER_2_MASK3	(0xB8)
++#define REG_VDP_TTX_FILTER_2_MASK4	(0xB9)
++#define REG_VDP_TTX_FILTER_2_MASK5	(0xBA)
++#define REG_VDP_TTX_FILTER_CONTROL	(0xBB)
++#define REG_VDP_FIFO_WORD_COUNT		(0xBC)
++#define REG_VDP_FIFO_INTERRUPT_THRLD	(0xBD)
++
++/* 0xBE Reserved */
++
++#define REG_VDP_FIFO_RESET		(0xBF)
++#define REG_VDP_FIFO_OUTPUT_CONTROL	(0xC0)
++#define REG_VDP_LINE_NUMBER_INTERRUPT	(0xC1)
++#define REG_VDP_PIXEL_ALIGNMENT_LSB	(0xC2)
++#define REG_VDP_PIXEL_ALIGNMENT_MSB	(0xC3)
++
++/* 0xC4 - 0xD5 Reserved */
++
++#define REG_VDP_LINE_START		(0xD6)
++#define REG_VDP_LINE_STOP		(0xD7)
++#define REG_VDP_GLOBAL_LINE_MODE	(0xD8)
++#define REG_VDP_FULL_FIELD_ENABLE	(0xD9)
++#define REG_VDP_FULL_FIELD_MODE		(0xDA)
++
++/* 0xDB - 0xDF Reserved */
++
++#define REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR	(0xE0)
++#define REG_VBUS_DATA_ACCESS_VBUS_ADDR_INCR	(0xE1)
++#define REG_FIFO_READ_DATA			(0xE2)
++
++/* 0xE3 - 0xE7 Reserved */
++
++#define REG_VBUS_ADDRESS_ACCESS1	(0xE8)
++#define REG_VBUS_ADDRESS_ACCESS2	(0xE9)
++#define REG_VBUS_ADDRESS_ACCESS3	(0xEA)
++
++/* 0xEB - 0xEF Reserved */
++
++#define REG_INTERRUPT_RAW_STATUS0	(0xF0)
++#define REG_INTERRUPT_RAW_STATUS1	(0xF1)
++#define REG_INTERRUPT_STATUS0		(0xF2)
++#define REG_INTERRUPT_STATUS1		(0xF3)
++#define REG_INTERRUPT_MASK0		(0xF4)
++#define REG_INTERRUPT_MASK1		(0xF5)
++#define REG_INTERRUPT_CLEAR0		(0xF6)
++#define REG_INTERRUPT_CLEAR1		(0xF7)
++
++/* 0xF8 - 0xFF Reserved */
++
++/* The ID values we are looking for */
++#define MT9V113_CHIP_ID_MSB		(0x51)
++
++#define MT9V113_IMAGE_STD_VGA			(0x01)
++#define MT9V113_IMAGE_STD_QVGA			(0x02)
++#define MT9V113_IMAGE_STD_INVALID		(0xFF)
++
++/*
++ * Status bit
++ */
++#define STATUS_TV_VCR_BIT		(1<<0)
++#define STATUS_HORZ_SYNC_LOCK_BIT	(1<<1)
++#define STATUS_VIRT_SYNC_LOCK_BIT	(1<<2)
++#define STATUS_CLR_SUBCAR_LOCK_BIT	(1<<3)
++#define STATUS_LOST_LOCK_DETECT_BIT	(1<<4)
++#define STATUS_FEILD_RATE_BIT		(1<<5)
++#define STATUS_LINE_ALTERNATING_BIT	(1<<6)
++#define STATUS_PEAK_WHITE_DETECT_BIT	(1<<7)
++
++/* Tokens for register write */
++#define TOK_WRITE                       (0)     /* token for write operation */
++#define TOK_TERM                        (1)     /* terminating token */
++#define TOK_DELAY                       (2)     /* delay token for reg list */
++#define TOK_SKIP                        (3)     /* token to skip a register */
++/**
++ * struct mt9v113_reg - Structure for TVP5146/47 register initialization values
++ * @token - Token: TOK_WRITE, TOK_TERM etc..
++ * @reg - Register offset
++ * @val - Register Value for TOK_WRITE or delay in ms for TOK_DELAY
++ */
++struct mt9v113_reg {
++	unsigned short token;
++	unsigned short reg;
++	unsigned short val;
++};
++
++/**
++ * struct mt9v113_init_seq - Structure for TVP5146/47/46M2/47M1 power up
++ *		Sequence.
++ * @ no_regs - Number of registers to write for power up sequence.
++ * @ init_reg_seq - Array of registers and respective value to write.
++ */
++struct mt9v113_init_seq {
++	unsigned int no_regs;
++	const struct mt9v113_reg *init_reg_seq;
++};
++
++#define MT9V113_CHIP_ID			(0x2280)
++
++#endif				/* ifndef _MT9V113_REGS_H */
+diff --git a/include/media/mt9v113.h b/include/media/mt9v113.h
+new file mode 100644
+index 0000000..c7ad362
+--- /dev/null
++++ b/include/media/mt9v113.h
+@@ -0,0 +1,83 @@
++/*
++ * drivers/media/video/mt9v113.h
++ *
++ * Copyright (C) 2008 Texas Instruments Inc
++ * Author: Vaibhav Hiremath <hvaibhav@ti.com>
++ *
++ * Contributors:
++ *     Sivaraj R <sivaraj@ti.com>
++ *     Brijesh R Jadav <brijesh.j@ti.com>
++ *     Hardik Shah <hardik.shah@ti.com>
++ *     Manjunath Hadli <mrh@ti.com>
++ *     Karicheri Muralidharan <m-karicheri2@ti.com>
++ *
++ * This package is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ */
++
++#ifndef _MT9V113_H
++#define _MT9V113_H
++
++/*
++ * Other macros
++ */
++#define MT9V113_MODULE_NAME		"mt9v113"
++
++/* Number of pixels and number of lines per frame for different standards */
++#define VGA_NUM_ACTIVE_PIXELS		(640*2)
++#define VGA_NUM_ACTIVE_LINES		(480)
++#define QVGA_NUM_ACTIVE_PIXELS	(320*2)
++#define QVGA_NUM_ACTIVE_LINES		(240)
++
++/**
++ * struct mt9v113_platform_data - Platform data values and access functions.
++ * @power_set: Power state access function, zero is off, non-zero is on.
++ * @ifparm: Interface parameters access function.
++ * @priv_data_set: Device private data (pointer) access function.
++ * @clk_polarity: Clock polarity of the current interface.
++ * @ hs_polarity: HSYNC Polarity configuration for current interface.
++ * @ vs_polarity: VSYNC Polarity configuration for current interface.
++ */
++struct mt9v113_platform_data {
++	char *master;
++	int (*power_set) (struct v4l2_int_device *s, enum v4l2_power on);
++	int (*ifparm) (struct v4l2_ifparm *p);
++	int (*priv_data_set) (void *);
++	/* Interface control params */
++	bool clk_polarity;
++	bool hs_polarity;
++	bool vs_polarity;
++};
++
++// new
++
++/*i2c adress for MT9V113*/
++#define MT9V113_I2C_ADDR  		(0x78 >>1)
++
++#define I2C_ONE_BYTE_TRANSFER		(1)
++#define I2C_TWO_BYTE_TRANSFER		(2)
++#define I2C_THREE_BYTE_TRANSFER		(3)
++#define I2C_FOUR_BYTE_TRANSFER		(4)
++#define I2C_TXRX_DATA_MASK		(0x00FF)
++#define I2C_TXRX_DATA_MASK_UPPER	(0xFF00)
++#define I2C_TXRX_DATA_SHIFT		(8)
++
++#define MT9V113_VGA_30FPS  (1130)
++#define MT9V113_QVGA_30FPS  (1131)
++
++#define MT9V113_CLK_MAX 	(54000000) /* 54MHz */
++#define MT9V113_CLK_MIN	(6000000)  /* 6Mhz */
++
++#endif				/* ifndef _MT9V113_H */
++
+diff --git a/include/media/v4l2-int-device.h b/include/media/v4l2-int-device.h
+index ce415ec..7827575 100644
+--- a/include/media/v4l2-int-device.h
++++ b/include/media/v4l2-int-device.h
+@@ -115,6 +115,7 @@ enum v4l2_if_type {
+ 	V4L2_IF_TYPE_BT656,
+ 	V4L2_IF_TYPE_YCbCr,
+ 	V4L2_IF_TYPE_RAW,
++	V4L2_IF_TYPE_PARALLEL,
+ };
+ 
+ enum v4l2_if_type_bt656_mode {
+@@ -215,12 +216,38 @@ struct v4l2_if_type_raw {
+ 	u32 clock_curr;
+ };
+ 
++struct v4l2_if_type_parallel {
++	/*
++	 * 0: Frame begins when vsync is high.
++	 * 1: Frame begins when vsync changes from low to high.
++	 */
++	unsigned frame_start_on_rising_vs:1;
++	/* Swap every two adjacent image data elements. */
++	unsigned swap:1;
++	/* Inverted latch clock polarity from slave. */
++	unsigned latch_clk_inv:1;
++	/* Hs polarity. 0 is active high, 1 active low. */
++	unsigned no_hs_inv:1;
++	/* Vs polarity. 0 is active high, 1 active low. */
++	unsigned no_vs_inv:1;
++	/* Minimum accepted bus clock for slave (in Hz). */
++	u32 clock_min;
++	/* Maximum accepted bus clock for slave. */
++	u32 clock_max;
++	/*
++	 * Current wish of the slave. May only change in response to
++	 * ioctls that affect image capture.
++	 */
++	u32 clock_curr;
++};
++
+ struct v4l2_ifparm {
+ 	enum v4l2_if_type if_type;
+ 	union {
+ 		struct v4l2_if_type_bt656 bt656;
+ 		struct v4l2_if_type_ycbcr ycbcr;
+ 		struct v4l2_if_type_raw raw;
++		struct v4l2_if_type_parallel parallel;
+ 	} u;
+ };
+ 
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0032-MT9V113-Fixed-sensor-nitialization-issues.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0032-MT9V113-Fixed-sensor-nitialization-issues.patch
new file mode 100644
index 0000000..ffb1e6b
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0032-MT9V113-Fixed-sensor-nitialization-issues.patch
@@ -0,0 +1,294 @@
+From b4d9f3d3f45b3f47ec243df170381b0c2d1049e7 Mon Sep 17 00:00:00 2001
+From: Vaibhav Hiremath <hvaibhav@ti.com>
+Date: Fri, 9 Jul 2010 17:38:09 +0530
+Subject: [PATCH 32/75] MT9V113: Fixed sensor nitialization issues
+
+With this patch sensor is now able to generate HS, VS and pixel clock, also
+CCDC is able to generate HS/VS, VD0, VD1 interrupts.
+
+There are some issues with Buffer processing in ISR routine because of which
+DQBUF still hangs.
+---
+ drivers/media/video/mt9v113.c     |  155 ++++++++++++++++++++----------------
+ drivers/media/video/omap34xxcam.c |    2 +-
+ 2 files changed, 87 insertions(+), 70 deletions(-)
+
+diff --git a/drivers/media/video/mt9v113.c b/drivers/media/video/mt9v113.c
+index 755a88a..8f8ba35 100644
+--- a/drivers/media/video/mt9v113.c
++++ b/drivers/media/video/mt9v113.c
+@@ -389,8 +389,8 @@ static int mt9v113_read_reg(struct i2c_client *client, unsigned short reg)
+ 		err = -ENODEV;
+ 		return err;
+ 	}else {
+-		// TODO: addr should be set up where else
+-		msg->addr = MT9V113_I2C_ADDR;//client->addr;
++		/* TODO: addr should be set up where else client->addr */
++		msg->addr = MT9V113_I2C_ADDR;
+ 		msg->flags = 0;
+ 		msg->len = I2C_TWO_BYTE_TRANSFER;
+ 		msg->buf = data;
+@@ -432,8 +432,8 @@ static int mt9v113_write_reg(struct i2c_client *client, unsigned short reg, unsi
+ 		if (!client->adapter) {
+ 			err = -ENODEV;
+ 		} else {
+-			// TODO: addr should be set up where else
+-			msg->addr = MT9V113_I2C_ADDR;//client->addr;
++			/* TODO:addr should be set up where else client->addr */
++			msg->addr = MT9V113_I2C_ADDR;
+ 			msg->flags = 0;
+ 			msg->len = I2C_FOUR_BYTE_TRANSFER;
+ 			msg->buf = data;
+@@ -446,51 +446,11 @@ static int mt9v113_write_reg(struct i2c_client *client, unsigned short reg, unsi
+ 			err = i2c_transfer(client->adapter, msg, 1);
+ 		}
+ 	}
+-	if (err < 0) {
++	if (err < 0)
+ 		printk(KERN_INFO "\n I2C write failed");
+-	}
+-	return err;
+-}
+-
+-/* configure mux, for DM355 EVM only */
+-#ifndef CONFIG_MACH_DM355_LEOPARD
+-static int mt9v113_en_mux(struct i2c_client *client)
+-{
+-	int err = 0;
+-	int trycnt = 0;
+-	/* unsigned short readval = 0;*/
+-
+-	struct i2c_msg msg[1];
+-	unsigned char data[4];
+-	err = -1;
+-	printk(KERN_INFO
+-		       "\n entering mt9v113_en_mux \n");
+-
+-	while ((err < 0) && (trycnt < 5)) {
+-		trycnt++;
+-		if (!client->adapter) {
+-			err = -ENODEV;
+-		} else {
+-			msg->addr = 0x25;
+-			msg->flags = 0;
+-			msg->len = I2C_TWO_BYTE_TRANSFER;
+-			msg->buf = data;
+-			data[0] = (unsigned char)(0x08 & I2C_TXRX_DATA_MASK);
+-			data[1] = (unsigned char)(0x80 & I2C_TXRX_DATA_MASK);
+ 
+-			err = i2c_transfer(client->adapter, msg, 1);
+-			if (err < 0) {
+-				printk(KERN_INFO
+-				       "\n ERROR in ECP  register write\n");
+-			}
+-		}
+-	}
+-	if (err < 0) {
+-		printk(KERN_INFO "\n I2C write failed");
+-	}
+ 	return err;
+ }
+-#endif
+ 
+ /*
+  * mt9v113_write_regs : Initializes a list of registers
+@@ -550,9 +510,10 @@ static int mt9v113_configure(struct mt9v113_decoder *decoder)
+ 	if (err)
+ 		return err;
+ 
+-//	if (debug)
+-//		mt9v113_reg_dump(decoder);
+-
++#if 0
++	if (debug)
++		mt9v113_reg_dump(decoder);
++#endif
+ 	return 0;
+ }
+ 
+@@ -573,6 +534,62 @@ static int mt9v113_vga_mode(struct mt9v113_decoder *decoder)
+ }
+ 
+ 
++/**
++ * ioctl_enum_framesizes - V4L2 sensor if handler for vidioc_int_enum_framesizes
++ * @s: pointer to standard V4L2 device structure
++ * @frms: pointer to standard V4L2 framesizes enumeration structure
++ *
++ * Returns possible framesizes depending on choosen pixel format
++ **/
++static int ioctl_enum_framesizes(struct v4l2_int_device *s,
++					struct v4l2_frmsizeenum *frms)
++{
++	struct mt9v113_decoder *decoder = s->priv;
++	int ifmt;
++
++	for (ifmt = 0; ifmt < decoder->num_fmts; ifmt++) {
++		if (frms->pixel_format == decoder->fmt_list[ifmt].pixelformat)
++			break;
++	}
++	/* Is requested pixelformat not found on sensor? */
++	if (ifmt == decoder->num_fmts)
++		return -EINVAL;
++
++	/* Do we already reached all discrete framesizes? */
++	if (frms->index >= decoder->num_stds)
++		return -EINVAL;
++
++	frms->type = V4L2_FRMSIZE_TYPE_DISCRETE;
++	frms->discrete.width = decoder->std_list[frms->index].width;
++	frms->discrete.height = decoder->std_list[frms->index].height;
++
++	return 0;
++
++}
++
++static int ioctl_enum_frameintervals(struct v4l2_int_device *s,
++					struct v4l2_frmivalenum *frmi)
++{
++	struct mt9v113_decoder *decoder = s->priv;
++	int ifmt;
++
++	if (frmi->index >= 1)
++		return -EINVAL;
++
++	for (ifmt = 0; ifmt < decoder->num_fmts; ifmt++) {
++		if (frmi->pixel_format == decoder->fmt_list[ifmt].pixelformat)
++			break;
++	}
++	/* Is requested pixelformat not found on sensor? */
++	if (ifmt == decoder->num_fmts)
++		return -EINVAL;
++
++	frmi->type = V4L2_FRMSIZE_TYPE_DISCRETE;
++	frmi->discrete.numerator = 1;
++	frmi->discrete.denominator = 10;
++	return 0;
++}
++
+ /*
+  * Detect if an mt9v113 is present, and if so which revision.
+  * A device is considered to be detected if the chip ID (LSB and MSB)
+@@ -585,15 +602,9 @@ static int mt9v113_detect(struct mt9v113_decoder *decoder)
+ {
+ 	unsigned short val=0;
+ 
+-#ifndef CONFIG_MACH_DM355_LEOPARD
+-//	mt9v113_en_mux(decoder->client);
+-#endif
+-
+ 	val = mt9v113_read_reg(decoder->client, REG_CHIP_ID);
+ 
+-	v4l_dbg(1, debug, decoder->client,
+-		 "chip id detected 0x%x\n",
+-		 val);
++	v4l_dbg(1, debug, decoder->client, "chip id detected 0x%x\n", val);
+ 
+ 	if (MT9V113_CHIP_ID != val) {
+ 		/* We didn't read the values we expected, so this must not be
+@@ -1042,7 +1053,7 @@ ioctl_s_fmt_cap(struct v4l2_int_device *s, struct v4l2_format *f)
+ 	if (rval)
+ 		return rval;
+ 
+-		decoder->pix = *pix;
++	decoder->pix = *pix;
+ 
+ 	return rval;
+ }
+@@ -1177,7 +1188,7 @@ static int ioctl_g_ifparm(struct v4l2_int_device *s, struct v4l2_ifparm *p)
+ 		return rval;
+ 	}
+ 
+-	p->u.bt656.clock_curr = 27000000; // TODO: read clock rate from sensor
++	p->u.bt656.clock_curr = 27000000; /* TODO:read clock rate from sensor */
+ 
+ 	return 0;
+ }
+@@ -1211,12 +1222,17 @@ static int ioctl_s_power(struct v4l2_int_device *s, enum v4l2_power on)
+ 	struct mt9v113_decoder *decoder = s->priv;
+ 	int err = 0;
+ 
++	if (decoder->state == STATE_DETECTED)
++		return 0;
++
+ 	switch (on) {
+ 	case V4L2_POWER_OFF:
+ 		/* Power Down Sequence */
+-		err =
+-		    mt9v113_write_reg(decoder->client, REG_OPERATION_MODE,
+-					0x01);
++/* TODO: FIXME: implement proper OFF and Standby code here */
++#if 0
++		err = mt9v113_write_reg(decoder->client, REG_OPERATION_MODE,
++				0x01);
++#endif
+ 		/* Disable mux for mt9v113 data path */
+ 		if (decoder->pdata->power_set)
+ 			err |= decoder->pdata->power_set(s, on);
+@@ -1242,9 +1258,10 @@ static int ioctl_s_power(struct v4l2_int_device *s, enum v4l2_power on)
+ 						"Unable to detect decoder\n");
+ 				return err;
+ 			}
++			/* Only VGA mode for now */
++			err |= mt9v113_configure(decoder);
++			err |= mt9v113_vga_mode(decoder);
+ 		}
+-		// Only VGA mode for now
+-		err |= mt9v113_vga_mode(decoder);
+ 		break;
+ 
+ 	default:
+@@ -1263,14 +1280,11 @@ static int ioctl_s_power(struct v4l2_int_device *s, enum v4l2_power on)
+  */
+ static int ioctl_init(struct v4l2_int_device *s)
+ {
+-//	struct mt9v113_decoder *decoder = s->priv;
++	struct mt9v113_decoder *decoder = s->priv;
+ 	int err = 0;
+ 
+-	/* Set default standard to auto */
+-	//mt9v113_reg_list[REG_VIDEO_STD].val =
+-	//    VIDEO_STD_AUTO_SWITCH_BIT;
+-//	err |= mt9v113_configure(decoder);
+-//	err |= mt9v113_vga_mode(decoder);
++	err |= mt9v113_configure(decoder);
++	err |= mt9v113_vga_mode(decoder);
+ 
+ 	return err;
+ }
+@@ -1298,7 +1312,6 @@ static int ioctl_dev_init(struct v4l2_int_device *s)
+ 	struct mt9v113_decoder *decoder = s->priv;
+ 	int err;
+ 
+-	printk("%s: %d\n", __func__, __LINE__);
+ 	err = mt9v113_detect(decoder);
+ 	if (err < 0) {
+ 		v4l_err(decoder->client,
+@@ -1340,6 +1353,10 @@ static struct v4l2_int_ioctl_desc mt9v113_ioctl_desc[] = {
+ 	{vidioc_int_s_std_num, (v4l2_int_ioctl_func *) ioctl_s_std},
+ 	{vidioc_int_s_video_routing_num,
+ 		(v4l2_int_ioctl_func *) ioctl_s_routing},
++	{vidioc_int_enum_framesizes_num,
++		(v4l2_int_ioctl_func *)ioctl_enum_framesizes},
++	{vidioc_int_enum_frameintervals_num,
++		(v4l2_int_ioctl_func *)ioctl_enum_frameintervals},
+ };
+ 
+ static struct v4l2_int_slave mt9v113_slave = {
+diff --git a/drivers/media/video/omap34xxcam.c b/drivers/media/video/omap34xxcam.c
+index 6301ed3..2e8153b 100644
+--- a/drivers/media/video/omap34xxcam.c
++++ b/drivers/media/video/omap34xxcam.c
+@@ -1852,8 +1852,8 @@ static int omap34xxcam_open(struct file *file)
+ 				vdev->slave_config[OMAP34XXCAM_SLAVE_SENSOR]
+ 					.cur_input = route.input;
+ 		}
+-		sensor_format.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ 	}
++	sensor_format.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ 
+ 	/* Get the format the sensor is using. */
+ 	rval = vidioc_int_g_fmt_cap(vdev->vdev_sensor, &sensor_format);
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0033-mt9v113-Fix-wrong-active-widths.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0033-mt9v113-Fix-wrong-active-widths.patch
new file mode 100644
index 0000000..c436b91
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0033-mt9v113-Fix-wrong-active-widths.patch
@@ -0,0 +1,29 @@
+From 77361cf426202a92395921c25e77190b8fb0cdd6 Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Fri, 9 Jul 2010 16:22:38 -0500
+Subject: [PATCH 33/75] mt9v113: Fix wrong active widths
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ include/media/mt9v113.h |    4 ++--
+ 1 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/include/media/mt9v113.h b/include/media/mt9v113.h
+index c7ad362..0a30f4c 100644
+--- a/include/media/mt9v113.h
++++ b/include/media/mt9v113.h
+@@ -35,9 +35,9 @@
+ #define MT9V113_MODULE_NAME		"mt9v113"
+ 
+ /* Number of pixels and number of lines per frame for different standards */
+-#define VGA_NUM_ACTIVE_PIXELS		(640*2)
++#define VGA_NUM_ACTIVE_PIXELS		(640)
+ #define VGA_NUM_ACTIVE_LINES		(480)
+-#define QVGA_NUM_ACTIVE_PIXELS	(320*2)
++#define QVGA_NUM_ACTIVE_PIXELS	(320)
+ #define QVGA_NUM_ACTIVE_LINES		(240)
+ 
+ /**
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0034-omap3isp-Fix-Wrong-check-on-non-interlaced-sensor-on.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0034-omap3isp-Fix-Wrong-check-on-non-interlaced-sensor-on.patch
new file mode 100644
index 0000000..72af379
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0034-omap3isp-Fix-Wrong-check-on-non-interlaced-sensor-on.patch
@@ -0,0 +1,34 @@
+From d6e6a76aa9d842ed9f8963ed10fc884cff3af5dd Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Fri, 9 Jul 2010 16:56:18 -0500
+Subject: [PATCH 34/75] omap3isp: Fix Wrong check on non-interlaced sensor on isr
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ drivers/media/video/isp/isp.c |    9 +++++----
+ 1 files changed, 5 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/media/video/isp/isp.c b/drivers/media/video/isp/isp.c
+index 29dd005..2ef2d58 100644
+--- a/drivers/media/video/isp/isp.c
++++ b/drivers/media/video/isp/isp.c
+@@ -978,11 +978,12 @@ static irqreturn_t omap34xx_isp_isr(int irq, void *_pdev)
+ 	}
+ 
+ 	if (irqstatus & CCDC_VD0) {
+-		if (isp->pipeline.pix.field == V4L2_FIELD_INTERLACED) {
++		if (((isp->pipeline.pix.field == V4L2_FIELD_INTERLACED) &&
++		     (isp->current_field != 0)) ||
++		    (isp->pipeline.pix.field != V4L2_FIELD_INTERLACED)) {
+ 			/* Skip even fields, and process only odd fields */
+-			if (isp->current_field != 0)
+-				if (RAW_CAPTURE(isp))
+-					isp_buf_process(dev, bufs);
++			if (RAW_CAPTURE(isp))
++				isp_buf_process(dev, bufs);
+ 		}
+ 		if (!ispccdc_busy(&isp->isp_ccdc))
+ 			ispccdc_config_shadow_registers(&isp->isp_ccdc);
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0035-omap3isp-Fix-bad-YUV_BT-checks-in-datapath_config.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0035-omap3isp-Fix-bad-YUV_BT-checks-in-datapath_config.patch
new file mode 100644
index 0000000..bb2a7f1
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0035-omap3isp-Fix-bad-YUV_BT-checks-in-datapath_config.patch
@@ -0,0 +1,45 @@
+From e069619a821aca3569440a4d8ccf3727ebe80ddd Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Sat, 10 Jul 2010 09:51:16 -0500
+Subject: [PATCH 35/75] omap3isp: Fix bad YUV_BT checks in datapath_config
+
+The use of an external write enable signals (from ISP point of
+view) shouldn't depend on the sensor parallel interface type.
+
+Also, the bit shift selection should NOT be other than 9_0 by
+default (i.e. No shift).
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ drivers/media/video/isp/ispccdc.c |   15 +++++----------
+ 1 files changed, 5 insertions(+), 10 deletions(-)
+
+diff --git a/drivers/media/video/isp/ispccdc.c b/drivers/media/video/isp/ispccdc.c
+index 137a5e6..ea6d87c 100644
+--- a/drivers/media/video/isp/ispccdc.c
++++ b/drivers/media/video/isp/ispccdc.c
+@@ -602,16 +602,11 @@ static int ispccdc_config_datapath(struct isp_ccdc_device *isp_ccdc,
+ 		syn_mode &= ~ISPCCDC_SYN_MODE_VP2SDR;
+ 		syn_mode &= ~ISPCCDC_SYN_MODE_SDR2RSZ;
+ 		syn_mode |= ISPCCDC_SYN_MODE_WEN;
+-		if (pipe->ccdc_in == CCDC_YUV_BT) {
+-			syn_mode &= ~ISPCCDC_SYN_MODE_EXWEN;
+-			isp_reg_and(isp_ccdc->dev, OMAP3_ISP_IOMEM_CCDC,
+-					ISPCCDC_CFG, ~ISPCCDC_CFG_WENLOG);
+-		} else {
+-			syn_mode |= ISPCCDC_SYN_MODE_EXWEN;
+-			isp_reg_or(isp_ccdc->dev, OMAP3_ISP_IOMEM_CCDC,
+-					ISPCCDC_CFG, ISPCCDC_CFG_WENLOG);
+-		}
+-		vpcfg.bitshift_sel = BIT11_2;
++		syn_mode &= ~ISPCCDC_SYN_MODE_EXWEN;
++
++		isp_reg_and(isp_ccdc->dev, OMAP3_ISP_IOMEM_CCDC,
++				ISPCCDC_CFG, ~ISPCCDC_CFG_WENLOG);
++		vpcfg.bitshift_sel = BIT9_0;
+ 		vpcfg.freq_sel = PIXCLKBY2;
+ 		ispccdc_config_vp(isp_ccdc, vpcfg);
+ 		ispccdc_enable_vp(isp_ccdc, 0);
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0036-omap3isp-Set-vd_pol-to-0-by-default-on-all-cases.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0036-omap3isp-Set-vd_pol-to-0-by-default-on-all-cases.patch
new file mode 100644
index 0000000..6a43782
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0036-omap3isp-Set-vd_pol-to-0-by-default-on-all-cases.patch
@@ -0,0 +1,35 @@
+From 2f4a4612cd2fa21468f708a9c981e39a3927611f Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Sat, 10 Jul 2010 09:57:40 -0500
+Subject: [PATCH 36/75] omap3isp: Set vd_pol to 0 by default on all cases
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ drivers/media/video/isp/ispccdc.c |    4 ++--
+ 1 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/media/video/isp/ispccdc.c b/drivers/media/video/isp/ispccdc.c
+index ea6d87c..b4691c0 100644
+--- a/drivers/media/video/isp/ispccdc.c
++++ b/drivers/media/video/isp/ispccdc.c
+@@ -671,7 +671,7 @@ static int ispccdc_config_datapath(struct isp_ccdc_device *isp_ccdc,
+ 		syncif.fldstat = 0;
+ 		syncif.hdpol = 0;
+ 		syncif.ipmod = YUV16;
+-		syncif.vdpol = 1;
++		syncif.vdpol = 0;
+ 		syncif.bt_r656_en = 0;
+ 		ispccdc_config_imgattr(isp_ccdc, 0);
+ 		ispccdc_config_sync_if(isp_ccdc, syncif);
+@@ -688,7 +688,7 @@ static int ispccdc_config_datapath(struct isp_ccdc_device *isp_ccdc,
+ 		syncif.fldstat = 0;
+ 		syncif.hdpol = 0;
+ 		syncif.ipmod = YUV8;
+-		syncif.vdpol = 1;
++		syncif.vdpol = 0;
+ 		syncif.bt_r656_en = 1;
+ 		ispccdc_config_imgattr(isp_ccdc, 0);
+ 		ispccdc_config_sync_if(isp_ccdc, syncif);
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0037-omap3isp-ccdc-Set-datalines-to-10-for-YUV_SYNC.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0037-omap3isp-ccdc-Set-datalines-to-10-for-YUV_SYNC.patch
new file mode 100644
index 0000000..ebb3686
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0037-omap3isp-ccdc-Set-datalines-to-10-for-YUV_SYNC.patch
@@ -0,0 +1,29 @@
+From 67e3840b98c88da4417e386d3e955385a120138e Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Mon, 12 Jul 2010 14:09:38 -0500
+Subject: [PATCH 37/75] omap3isp: ccdc: Set datalines to 10 for YUV_SYNC
+
+Most of the sensors we use are 10 bits, so set this as
+default.
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ drivers/media/video/isp/ispccdc.c |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/drivers/media/video/isp/ispccdc.c b/drivers/media/video/isp/ispccdc.c
+index b4691c0..280a721 100644
+--- a/drivers/media/video/isp/ispccdc.c
++++ b/drivers/media/video/isp/ispccdc.c
+@@ -664,7 +664,7 @@ static int ispccdc_config_datapath(struct isp_ccdc_device *isp_ccdc,
+ 	case CCDC_YUV_SYNC:
+ 		syncif.ccdc_mastermode = 0;
+ 		syncif.datapol = 0;
+-		syncif.datsz = DAT8;
++		syncif.datsz = DAT10;
+ 		syncif.fldmode = 0;
+ 		syncif.fldout = 0;
+ 		syncif.fldpol = 0;
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0038-omap3beagle-camera-Fix-parallel-i-f-settings.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0038-omap3beagle-camera-Fix-parallel-i-f-settings.patch
new file mode 100644
index 0000000..456c4d2
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0038-omap3beagle-camera-Fix-parallel-i-f-settings.patch
@@ -0,0 +1,43 @@
+From efa8018485d29f3545e174dc10af0d01b9197077 Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Mon, 12 Jul 2010 14:11:44 -0500
+Subject: [PATCH 38/75] omap3beagle: camera: Fix parallel i/f settings
+
+This makes the sensor input be shifted from 13:4 -> 9:0, as
+in YUV streaming, the 8 least significant pins are used.
+
+Also, activate the 8 to 16 bit conversion bridge in ISP, in
+big endian mode.
+
+This makes the ISP interpret the data correctly now. ;)
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ arch/arm/mach-omap2/board-omap3beagle-camera.c |    4 ++--
+ 1 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle-camera.c b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+index 6c06265..0a591a1 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle-camera.c
++++ b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+@@ -64,7 +64,7 @@ static struct regulator *beagle_mt9v113_1_8v2;
+ 
+ static struct isp_interface_config mt9v113_if_config = {
+ 	.ccdc_par_ser		= ISP_PARLL,
+-	.dataline_shift		= 0x0,
++	.dataline_shift		= 0x2,
+ 	.hsvs_syncdetect	= ISPCTRL_SYNC_DETECT_VSRISE,
+ 	.strobe			= 0x0,
+ 	.prestrobe		= 0x0,
+@@ -72,7 +72,7 @@ static struct isp_interface_config mt9v113_if_config = {
+ 	.cam_mclk		= ISP_MT9V113_MCLK,
+ 	.wenlog 		= ISPCCDC_CFG_WENLOG_AND,
+ 	.wait_hs_vs		= 2,
+-	.u.par.par_bridge	= 0x1,
++	.u.par.par_bridge	= 0x3,
+ 	.u.par.par_clk_pol	= 0x0,
+ };
+ 
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0039-omap3beagle-camera-Clean-up-Remove-unneccessary-code.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0039-omap3beagle-camera-Clean-up-Remove-unneccessary-code.patch
new file mode 100644
index 0000000..0c836db
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0039-omap3beagle-camera-Clean-up-Remove-unneccessary-code.patch
@@ -0,0 +1,118 @@
+From 9f2341ea93de0e76d71c075791cdada7b9ce163b Mon Sep 17 00:00:00 2001
+From: Vaibhav Hiremath <hvaibhav@ti.com>
+Date: Tue, 13 Jul 2010 19:38:51 +0530
+Subject: [PATCH 39/75] omap3beagle-camera:Clean up: Remove unneccessary code/printf
+
+Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
+---
+ arch/arm/mach-omap2/board-omap3beagle-camera.c |   25 +++--------------------
+ 1 files changed, 4 insertions(+), 21 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle-camera.c b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+index 0a591a1..be59040 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle-camera.c
++++ b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+@@ -77,7 +77,7 @@ static struct isp_interface_config mt9v113_if_config = {
+ };
+ 
+ static struct v4l2_ifparm mt9v113_ifparm_s = {
+-#if 1
++#if 0
+ 	.if_type = V4L2_IF_TYPE_RAW,
+ 	.u 	 = {
+ 		.raw = {
+@@ -192,32 +192,24 @@ static int mt9v113_power_set(struct v4l2_int_device *s, enum v4l2_power power)
+ 
+ 		/* turn on VDD */
+ 		regulator_enable(beagle_mt9v113_1_8v1);
+-
+ 		mdelay(1);
+-
+ 		/* turn on VDD_IO */
+ 		regulator_enable(beagle_mt9v113_1_8v2);
+-
+ 		mdelay(50);
+ 
+ 		/* Enable EXTCLK */
+ 		isp_set_xclk(vdev->cam->isp, MT9V113_CLK_MIN, CAM_USE_XCLKA);
+-
+ 		/*
+ 		 * Wait at least 70 CLK cycles (w/EXTCLK = 6MHz, or CLK_MIN):
+ 		 * ((1000000 * 70) / 6000000) = aprox 12 us.
+ 		 */
+-
+ 		udelay(12);
+-
+ 		/* Set RESET_BAR to 1 */
+ 		gpio_set_value(LEOPARD_RESET_GPIO, 1);
+-
+ 		/*
+ 		 * Wait at least 100 CLK cycles (w/EXTCLK = 6MHz, or CLK_MIN):
+ 		 * ((1000000 * 100) / 6000000) = aprox 17 us.
+ 		 */
+-
+ 		udelay(17);
+ 
+ 		break;
+@@ -245,15 +237,11 @@ struct mt9v113_platform_data mt9v113_pdata = {
+ 
+ static int beagle_cam_probe(struct platform_device *pdev)
+ {
+-	int err;
+-
+-	printk("%s:%d\n", __func__, __LINE__);
+ 	beagle_mt9v113_1_8v1 = regulator_get(&pdev->dev, "vaux3_1");
+ 	if (IS_ERR(beagle_mt9v113_1_8v1)) {
+ 		dev_err(&pdev->dev, "vaux3_1 regulator missing\n");
+ 		return PTR_ERR(beagle_mt9v113_1_8v1);
+ 	}
+-	printk("%s:%d\n", __func__, __LINE__);
+ 	beagle_mt9v113_1_8v2 = regulator_get(&pdev->dev, "vaux4_1");
+ 	if (IS_ERR(beagle_mt9v113_1_8v2)) {
+ 		dev_err(&pdev->dev, "vaux4_1 regulator missing\n");
+@@ -261,7 +249,6 @@ static int beagle_cam_probe(struct platform_device *pdev)
+ 		return PTR_ERR(beagle_mt9v113_1_8v2);
+ 	}
+ 
+-	printk("%s:%d\n", __func__, __LINE__);
+ 	if (gpio_request(LEOPARD_RESET_GPIO, "cam_rst") != 0) {
+ 		dev_err(&pdev->dev, "Could not request GPIO %d",
+ 			LEOPARD_RESET_GPIO);
+@@ -270,7 +257,6 @@ static int beagle_cam_probe(struct platform_device *pdev)
+ 		return -ENODEV;
+ 	}
+ 
+-	printk("%s:%d\n", __func__, __LINE__);
+ 	/* set to output mode, default value 0 */
+ 	gpio_direction_output(LEOPARD_RESET_GPIO, 0);
+ 
+@@ -281,10 +267,10 @@ static int beagle_cam_probe(struct platform_device *pdev)
+ 
+ static int beagle_cam_remove(struct platform_device *pdev)
+ {
+-	printk("%s:%d\n", __func__, __LINE__);
+ 	if (regulator_is_enabled(beagle_mt9v113_1_8v1))
+ 		regulator_disable(beagle_mt9v113_1_8v1);
+ 	regulator_put(beagle_mt9v113_1_8v1);
++
+ 	if (regulator_is_enabled(beagle_mt9v113_1_8v2))
+ 		regulator_disable(beagle_mt9v113_1_8v2);
+ 	regulator_put(beagle_mt9v113_1_8v2);
+@@ -360,12 +346,9 @@ static struct platform_driver beagle_cam_driver = {
+  */
+ int __init omap3beaglelmb_init(void)
+ {
+-	printk("%s:%d\n", __func__, __LINE__);
+-	if (cpu_is_omap3630()) {
+-	printk("%s:%d\n", __func__, __LINE__);
++	if (cpu_is_omap3630())
+ 		platform_driver_register(&beagle_cam_driver);
+-	}
+-	printk("%s:%d\n", __func__, __LINE__);
++
+ 	return 0;
+ }
+ late_initcall(omap3beaglelmb_init);
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0040-mt9v113-Clean-Up-Remove-unneccessary-code-printf.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0040-mt9v113-Clean-Up-Remove-unneccessary-code-printf.patch
new file mode 100644
index 0000000..9e0361d
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0040-mt9v113-Clean-Up-Remove-unneccessary-code-printf.patch
@@ -0,0 +1,390 @@
+From c0b564c145013ca024787702dc9f43c56016c5ec Mon Sep 17 00:00:00 2001
+From: Vaibhav Hiremath <hvaibhav@ti.com>
+Date: Tue, 13 Jul 2010 19:39:34 +0530
+Subject: [PATCH 40/75] mt9v113:Clean Up: Remove unneccessary code/printf
+
+Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
+---
+ drivers/media/video/mt9v113.c |  105 ++++++++++++++++------------------------
+ 1 files changed, 42 insertions(+), 63 deletions(-)
+
+diff --git a/drivers/media/video/mt9v113.c b/drivers/media/video/mt9v113.c
+index 8f8ba35..9a86cce 100644
+--- a/drivers/media/video/mt9v113.c
++++ b/drivers/media/video/mt9v113.c
+@@ -22,10 +22,10 @@
+ #include <linux/i2c.h>
+ #include <linux/delay.h>
+ #include <linux/videodev2.h>
++#include <linux/io.h>
++
+ #include <media/v4l2-int-device.h>
+ #include <media/mt9v113.h>
+-#include <mach/hardware.h>
+-#include <linux/io.h>
+ 
+ #include "mt9v113_regs.h"
+ 
+@@ -34,21 +34,13 @@
+ 
+ /* Private macros for TVP */
+ #define I2C_RETRY_COUNT                 (5)
+-#define LOCK_RETRY_COUNT                (5)
+-#define LOCK_RETRY_DELAY                (200)
+ 
+ /* Debug functions */
+ static int debug = 1;
+ module_param(debug, bool, 0644);
+ MODULE_PARM_DESC(debug, "Debug level (0-1)");
+ 
+-#define dump_reg(client, reg, val)				\
+-	do {							\
+-		val = mt9v113_read_reg(client, reg);		\
+-		v4l_info(client, "Reg(0x%.2X): 0x%.2X\n", reg, val); \
+-	} while (0)
+-
+-/**
++/*
+  * enum mt9v113_std - enum for supported standards
+  */
+ enum mt9v113_std {
+@@ -57,7 +49,7 @@ enum mt9v113_std {
+ 	MT9V113_STD_INVALID
+ };
+ 
+-/**
++/*
+  * enum mt9v113_state - enum for different decoder states
+  */
+ enum mt9v113_state {
+@@ -65,7 +57,7 @@ enum mt9v113_state {
+ 	STATE_DETECTED
+ };
+ 
+-/**
++/*
+  * struct mt9v113_std_info - Structure to store standard informations
+  * @width: Line width in pixels
+  * @height:Number of active lines
+@@ -79,7 +71,7 @@ struct mt9v113_std_info {
+ 	struct v4l2_standard standard;
+ };
+ 
+-/**
++/*
+  * struct mt9v113_decoded - decoder object
+  * @v4l2_int_device: Slave handle
+  * @pdata: Board specific
+@@ -93,7 +85,6 @@ struct mt9v113_std_info {
+  * @current_std: Current standard
+  * @num_stds: Number of standards
+  * @std_list: Standards list
+- * @route: input and output routing at chip level
+  */
+ struct mt9v113_decoder {
+ 	struct v4l2_int_device *v4l2_int_device;
+@@ -112,8 +103,6 @@ struct mt9v113_decoder {
+ 	enum mt9v113_std current_std;
+ 	int num_stds;
+ 	struct mt9v113_std_info *std_list;
+-
+-	struct v4l2_routing route;
+ };
+ 
+ /* MT9V113 register set for VGA mode */
+@@ -160,7 +149,7 @@ static struct mt9v113_reg mt9v113_reg_list[] = {
+ 	{TOK_WRITE, 0x0016, 0x42DF},
+ 	{TOK_WRITE, 0x0014, 0x2145},
+ 	{TOK_WRITE, 0x0014, 0x2145},
+-	{TOK_WRITE, 0x0010, 0x0431},
++	{TOK_WRITE, 0x0010, 0x0231},
+ 	{TOK_WRITE, 0x0012, 0x0000},
+ 	{TOK_WRITE, 0x0014, 0x244B},
+ 	{TOK_WRITE, 0x0014, 0x304B},
+@@ -378,6 +367,10 @@ static const struct v4l2_queryctrl mt9v113_autogain_ctrl = {
+ 	.default_value = 1,
+ };
+ 
++const struct v4l2_fract mt9v113_frameintervals[] = {
++	{  .numerator = 1, .denominator = 10 }
++};
++
+ static int mt9v113_read_reg(struct i2c_client *client, unsigned short reg)
+ {
+ 	int err = 0;
+@@ -510,10 +503,6 @@ static int mt9v113_configure(struct mt9v113_decoder *decoder)
+ 	if (err)
+ 		return err;
+ 
+-#if 0
+-	if (debug)
+-		mt9v113_reg_dump(decoder);
+-#endif
+ 	return 0;
+ }
+ 
+@@ -534,13 +523,13 @@ static int mt9v113_vga_mode(struct mt9v113_decoder *decoder)
+ }
+ 
+ 
+-/**
++/*
+  * ioctl_enum_framesizes - V4L2 sensor if handler for vidioc_int_enum_framesizes
+  * @s: pointer to standard V4L2 device structure
+  * @frms: pointer to standard V4L2 framesizes enumeration structure
+  *
+  * Returns possible framesizes depending on choosen pixel format
+- **/
++ */
+ static int ioctl_enum_framesizes(struct v4l2_int_device *s,
+ 					struct v4l2_frmsizeenum *frms)
+ {
+@@ -584,9 +573,14 @@ static int ioctl_enum_frameintervals(struct v4l2_int_device *s,
+ 	if (ifmt == decoder->num_fmts)
+ 		return -EINVAL;
+ 
++	if (frmi->index >= ARRAY_SIZE(mt9v113_frameintervals))
++		return -EINVAL;
++
+ 	frmi->type = V4L2_FRMSIZE_TYPE_DISCRETE;
+-	frmi->discrete.numerator = 1;
+-	frmi->discrete.denominator = 10;
++	frmi->discrete.numerator =
++		mt9v113_frameintervals[frmi->index].numerator;
++	frmi->discrete.denominator =
++		mt9v113_frameintervals[frmi->index].denominator;
+ 	return 0;
+ }
+ 
+@@ -631,7 +625,7 @@ static int mt9v113_detect(struct mt9v113_decoder *decoder)
+  * mt9v113 decoder driver.
+  */
+ 
+-/**
++/*
+  * ioctl_querystd - V4L2 decoder interface handler for VIDIOC_QUERYSTD ioctl
+  * @s: pointer to standard V4L2 device structure
+  * @std_id: standard V4L2 std_id ioctl enum
+@@ -660,7 +654,7 @@ static int ioctl_querystd(struct v4l2_int_device *s, v4l2_std_id *std_id)
+ 	return 0;
+ }
+ 
+-/**
++/*
+  * ioctl_s_std - V4L2 decoder interface handler for VIDIOC_S_STD ioctl
+  * @s: pointer to standard V4L2 device structure
+  * @std_id: standard V4L2 v4l2_std_id ioctl enum
+@@ -696,7 +690,7 @@ static int ioctl_s_std(struct v4l2_int_device *s, v4l2_std_id *std_id)
+ 	return 0;
+ }
+ 
+-/**
++/*
+  * ioctl_s_routing - V4L2 decoder interface handler for VIDIOC_S_INPUT ioctl
+  * @s: pointer to standard V4L2 device structure
+  * @index: number of the input
+@@ -711,7 +705,7 @@ static int ioctl_s_routing(struct v4l2_int_device *s,
+ 	return 0;
+ }
+ 
+-/**
++/*
+  * ioctl_queryctrl - V4L2 decoder interface handler for VIDIOC_QUERYCTRL ioctl
+  * @s: pointer to standard V4L2 device structure
+  * @qctrl: standard V4L2 v4l2_queryctrl structure
+@@ -771,7 +765,7 @@ ioctl_queryctrl(struct v4l2_int_device *s, struct v4l2_queryctrl *qctrl)
+ 	return err;
+ }
+ 
+-/**
++/*
+  * ioctl_g_ctrl - V4L2 decoder interface handler for VIDIOC_G_CTRL ioctl
+  * @s: pointer to standard V4L2 device structure
+  * @ctrl: pointer to v4l2_control structure
+@@ -828,7 +822,7 @@ ioctl_g_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl)
+ 	return 0;
+ }
+ 
+-/**
++/*
+  * ioctl_s_ctrl - V4L2 decoder interface handler for VIDIOC_S_CTRL ioctl
+  * @s: pointer to standard V4L2 device structure
+  * @ctrl: pointer to v4l2_control structure
+@@ -936,7 +930,7 @@ ioctl_s_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl)
+ 	return err;
+ }
+ 
+-/**
++/*
+  * ioctl_enum_fmt_cap - Implement the CAPTURE buffer VIDIOC_ENUM_FMT ioctl
+  * @s: pointer to standard V4L2 device structure
+  * @fmt: standard V4L2 VIDIOC_ENUM_FMT ioctl structure
+@@ -969,7 +963,7 @@ ioctl_enum_fmt_cap(struct v4l2_int_device *s, struct v4l2_fmtdesc *fmt)
+ 	return 0;
+ }
+ 
+-/**
++/*
+  * ioctl_try_fmt_cap - Implement the CAPTURE buffer VIDIOC_TRY_FMT ioctl
+  * @s: pointer to standard V4L2 device structure
+  * @f: pointer to standard V4L2 VIDIOC_TRY_FMT ioctl structure
+@@ -1026,7 +1020,7 @@ ioctl_try_fmt_cap(struct v4l2_int_device *s, struct v4l2_format *f)
+ 	return 0;
+ }
+ 
+-/**
++/*
+  * ioctl_s_fmt_cap - V4L2 decoder interface handler for VIDIOC_S_FMT ioctl
+  * @s: pointer to standard V4L2 device structure
+  * @f: pointer to standard V4L2 VIDIOC_S_FMT ioctl structure
+@@ -1058,7 +1052,7 @@ ioctl_s_fmt_cap(struct v4l2_int_device *s, struct v4l2_format *f)
+ 	return rval;
+ }
+ 
+-/**
++/*
+  * ioctl_g_fmt_cap - V4L2 decoder interface handler for ioctl_g_fmt_cap
+  * @s: pointer to standard V4L2 device structure
+  * @f: pointer to standard V4L2 v4l2_format structure
+@@ -1087,7 +1081,7 @@ ioctl_g_fmt_cap(struct v4l2_int_device *s, struct v4l2_format *f)
+ 	return 0;
+ }
+ 
+-/**
++/*
+  * ioctl_g_parm - V4L2 decoder interface handler for VIDIOC_G_PARM ioctl
+  * @s: pointer to standard V4L2 device structure
+  * @a: pointer to standard V4L2 VIDIOC_G_PARM ioctl structure
+@@ -1125,7 +1119,7 @@ ioctl_g_parm(struct v4l2_int_device *s, struct v4l2_streamparm *a)
+ 	return 0;
+ }
+ 
+-/**
++/*
+  * ioctl_s_parm - V4L2 decoder interface handler for VIDIOC_S_PARM ioctl
+  * @s: pointer to standard V4L2 device structure
+  * @a: pointer to standard V4L2 VIDIOC_S_PARM ioctl structure
+@@ -1161,7 +1155,7 @@ ioctl_s_parm(struct v4l2_int_device *s, struct v4l2_streamparm *a)
+ 	return 0;
+ }
+ 
+-/**
++/*
+  * ioctl_g_ifparm - V4L2 decoder interface handler for vidioc_int_g_ifparm_num
+  * @s: pointer to standard V4L2 device structure
+  * @p: pointer to standard V4L2 vidioc_int_g_ifparm_num ioctl structure
+@@ -1193,7 +1187,7 @@ static int ioctl_g_ifparm(struct v4l2_int_device *s, struct v4l2_ifparm *p)
+ 	return 0;
+ }
+ 
+-/**
++/*
+  * ioctl_g_priv - V4L2 decoder interface handler for vidioc_int_g_priv_num
+  * @s: pointer to standard V4L2 device structure
+  * @p: void pointer to hold decoder's private data address
+@@ -1210,7 +1204,7 @@ static int ioctl_g_priv(struct v4l2_int_device *s, void *p)
+ 	return decoder->pdata->priv_data_set(p);
+ }
+ 
+-/**
++/*
+  * ioctl_s_power - V4L2 decoder interface handler for vidioc_int_s_power_num
+  * @s: pointer to standard V4L2 device structure
+  * @on: power state to which device is to be set
+@@ -1272,7 +1266,7 @@ static int ioctl_s_power(struct v4l2_int_device *s, enum v4l2_power on)
+ 	return err;
+ }
+ 
+-/**
++/*
+  * ioctl_init - V4L2 decoder interface handler for VIDIOC_INT_INIT
+  * @s: pointer to standard V4L2 device structure
+  *
+@@ -1289,7 +1283,7 @@ static int ioctl_init(struct v4l2_int_device *s)
+ 	return err;
+ }
+ 
+-/**
++/*
+  * ioctl_dev_exit - V4L2 decoder interface handler for vidioc_int_dev_exit_num
+  * @s: pointer to standard V4L2 device structure
+  *
+@@ -1300,7 +1294,7 @@ static int ioctl_dev_exit(struct v4l2_int_device *s)
+ 	return 0;
+ }
+ 
+-/**
++/*
+  * ioctl_dev_init - V4L2 decoder interface handler for vidioc_int_dev_init_num
+  * @s: pointer to standard V4L2 device structure
+  *
+@@ -1397,7 +1391,7 @@ static struct v4l2_int_device mt9v113_int_device = {
+ 	      },
+ };
+ 
+-/**
++/*
+  * mt9v113_probe - decoder driver i2c probe handler
+  * @client: i2c driver client device structure
+  *
+@@ -1410,30 +1404,15 @@ mt9v113_probe(struct i2c_client *client, const struct i2c_device_id *id)
+ 	struct mt9v113_decoder *decoder = &mt9v113_dev;
+ 	int err;
+ 
+-	printk("%s: %d\n", __func__, __LINE__);
+ 	/* Check if the adapter supports the needed features */
+ 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ 		return -EIO;
+ 
+-	printk("%s: %d\n", __func__, __LINE__);
+ 	decoder->pdata = client->dev.platform_data;
+ 	if (!decoder->pdata) {
+ 		v4l_err(client, "No platform data!!\n");
+ 		return -ENODEV;
+ 	}
+-	printk("%s: %d\n", __func__, __LINE__);
+-	/*
+-	 * Fetch platform specific data, and configure the
+-	 * mt9v113_reg_list[] accordingly. Since this is one
+-	 * time configuration, no need to preserve.
+-	 */
+-
+-	/*mt9v113_reg_list[REG_OUTPUT_FORMATTER2].val |=
+-			(decoder->pdata->clk_polarity << 1);
+-	mt9v113_reg_list[REG_SYNC_CONTROL].val |=
+-			((decoder->pdata->hs_polarity << 2) |
+-			(decoder->pdata->vs_polarity << 3));
+-	*/
+ 	/*
+ 	 * Save the id data, required for power up sequence
+ 	 */
+@@ -1458,7 +1437,7 @@ mt9v113_probe(struct i2c_client *client, const struct i2c_device_id *id)
+ 	return 0;
+ }
+ 
+-/**
++/*
+  * mt9v113_remove - decoder driver i2c remove handler
+  * @client: i2c driver client device structure
+  *
+@@ -1511,7 +1490,7 @@ static struct i2c_driver mt9v113_i2c_driver = {
+ 	.id_table = mt9v113_id,
+ };
+ 
+-/**
++/*
+  * mt9v113_init
+  *
+  * Module init function
+@@ -1521,7 +1500,7 @@ static int __init mt9v113_init(void)
+ 	return i2c_add_driver(&mt9v113_i2c_driver);
+ }
+ 
+-/**
++/*
+  * mt9v113_cleanup
+  *
+  * Module exit function
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0041-MT9V113-Min-Max-clk-input-changed-as-per-the-spec.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0041-MT9V113-Min-Max-clk-input-changed-as-per-the-spec.patch
new file mode 100644
index 0000000..a9cac28
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0041-MT9V113-Min-Max-clk-input-changed-as-per-the-spec.patch
@@ -0,0 +1,54 @@
+From b174adfdb2836b01f8306f6112b7a8c36540f7d2 Mon Sep 17 00:00:00 2001
+From: Vaibhav Hiremath <hvaibhav@ti.com>
+Date: Tue, 13 Jul 2010 19:40:39 +0530
+Subject: [PATCH 41/75] MT9V113: Min, Max clk input changed as per the spec
+
+Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
+---
+ arch/arm/mach-omap2/board-omap3beagle-camera.c |    2 +-
+ drivers/media/video/isp/ispreg.h               |    2 +-
+ include/media/mt9v113.h                        |    2 +-
+ 3 files changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle-camera.c b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+index be59040..8d4e5ab 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle-camera.c
++++ b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+@@ -198,7 +198,7 @@ static int mt9v113_power_set(struct v4l2_int_device *s, enum v4l2_power power)
+ 		mdelay(50);
+ 
+ 		/* Enable EXTCLK */
+-		isp_set_xclk(vdev->cam->isp, MT9V113_CLK_MIN, CAM_USE_XCLKA);
++		isp_set_xclk(vdev->cam->isp, MT9V113_CLK_MIN*2, CAM_USE_XCLKA);
+ 		/*
+ 		 * Wait at least 70 CLK cycles (w/EXTCLK = 6MHz, or CLK_MIN):
+ 		 * ((1000000 * 70) / 6000000) = aprox 12 us.
+diff --git a/drivers/media/video/isp/ispreg.h b/drivers/media/video/isp/ispreg.h
+index 1240e0e..098713e 100644
+--- a/drivers/media/video/isp/ispreg.h
++++ b/drivers/media/video/isp/ispreg.h
+@@ -116,7 +116,7 @@
+ #define ISP_32B_BOUNDARY_BUF		0xFFFFFFE0
+ #define ISP_32B_BOUNDARY_OFFSET		0x0000FFE0
+ 
+-#define CM_CAM_MCLK_HZ			172800000	/* Hz */
++#define CM_CAM_MCLK_HZ			216000000	/* Hz */
+ 
+ /* ISP Submodules offset */
+ 
+diff --git a/include/media/mt9v113.h b/include/media/mt9v113.h
+index 0a30f4c..4504f26 100644
+--- a/include/media/mt9v113.h
++++ b/include/media/mt9v113.h
+@@ -76,7 +76,7 @@ struct mt9v113_platform_data {
+ #define MT9V113_VGA_30FPS  (1130)
+ #define MT9V113_QVGA_30FPS  (1131)
+ 
+-#define MT9V113_CLK_MAX 	(54000000) /* 54MHz */
++#define MT9V113_CLK_MAX 	(48000000) /* 48MHz */
+ #define MT9V113_CLK_MIN	(6000000)  /* 6Mhz */
+ 
+ #endif				/* ifndef _MT9V113_H */
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0042-omap3beagle-camera-Further-clode-cleanup.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0042-omap3beagle-camera-Further-clode-cleanup.patch
new file mode 100644
index 0000000..19fb41e
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0042-omap3beagle-camera-Further-clode-cleanup.patch
@@ -0,0 +1,237 @@
+From a23ae536374534ed021479b63ec093d5e58a9186 Mon Sep 17 00:00:00 2001
+From: Vaibhav Hiremath <hvaibhav@ti.com>
+Date: Wed, 14 Jul 2010 19:07:06 +0530
+Subject: [PATCH 42/75] omap3beagle-camera: Further clode cleanup
+
+Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
+---
+ arch/arm/mach-omap2/board-omap3beagle-camera.c |   89 ++++--------------------
+ drivers/media/video/isp/isp.h                  |   13 ++++
+ 2 files changed, 28 insertions(+), 74 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle-camera.c b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+index 8d4e5ab..90eadd0 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle-camera.c
++++ b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+@@ -46,21 +46,19 @@
+ #include "mux.h"
+ #include "board-omap3beagle-camera.h"
+ 
+-#define MODULE_NAME			"omap3beaglelmb"
++#define MODULE_NAME		"omap3beaglelmb"
+ 
+-#define CAM_USE_XCLKA       0
++#define CAM_USE_XCLKA		0
+ 
+-#define ISP_MT9V113_MCLK		216000000
++#define ISP_MT9V113_MCLK	216000000
+ 
+-#define LEOPARD_RESET_GPIO		98
++#define LEOPARD_RESET_GPIO	98
+ 
+ static struct regulator *beagle_mt9v113_1_8v1;
+ static struct regulator *beagle_mt9v113_1_8v2;
+ 
+-#if defined(CONFIG_VIDEO_MT9V113) || defined(CONFIG_VIDEO_MT9V113_MODULE)
+-
+ /* Arbitrary memory handling limit */
+-#define MT9V113_BIGGEST_FRAME_BYTE_SIZE	PAGE_ALIGN(2048 * 1536 * 4)
++#define MT9V113_MAX_FRAME_SIZE	PAGE_ALIGN(640 * 480 * 4)
+ 
+ static struct isp_interface_config mt9v113_if_config = {
+ 	.ccdc_par_ser		= ISP_PARLL,
+@@ -77,21 +75,6 @@ static struct isp_interface_config mt9v113_if_config = {
+ };
+ 
+ static struct v4l2_ifparm mt9v113_ifparm_s = {
+-#if 0
+-	.if_type = V4L2_IF_TYPE_RAW,
+-	.u 	 = {
+-		.raw = {
+-			.frame_start_on_rising_vs = 1,
+-			.bt_sync_correct	= 0,
+-			.swap			= 0,
+-			.latch_clk_inv		= 0,
+-			.nobt_hs_inv		= 0,	/* active high */
+-			.nobt_vs_inv		= 0,	/* active high */
+-			.clock_min		= MT9V113_CLK_MIN,
+-			.clock_max		= MT9V113_CLK_MAX,
+-		},
+-	},
+-#else
+ 	.if_type = V4L2_IF_TYPE_YCbCr,
+ 	.u 	 = {
+ 		.ycbcr = {
+@@ -99,13 +82,12 @@ static struct v4l2_ifparm mt9v113_ifparm_s = {
+ 			.bt_sync_correct	= 0,
+ 			.swap			= 0,
+ 			.latch_clk_inv		= 0,
+-			.nobt_hs_inv		= 0,	/* active high */
+-			.nobt_vs_inv		= 0,	/* active high */
++			.nobt_hs_inv		= 0,
++			.nobt_vs_inv		= 0,
+ 			.clock_min		= MT9V113_CLK_MIN,
+ 			.clock_max		= MT9V113_CLK_MAX,
+ 		},
+ 	},
+-#endif
+ };
+ 
+ /**
+@@ -124,16 +106,14 @@ static int mt9v113_ifparm(struct v4l2_ifparm *p)
+ 	return 0;
+ }
+ 
+-#if defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE)
+ static struct omap34xxcam_hw_config mt9v113_hwc = {
+ 	.dev_index		= 0,
+ 	.dev_minor		= 0,
+ 	.dev_type		= OMAP34XXCAM_SLAVE_SENSOR,
+ 	.u.sensor.sensor_isp	= 1,
+-	.u.sensor.capture_mem	= MT9V113_BIGGEST_FRAME_BYTE_SIZE * 2,
++	.u.sensor.capture_mem	= MT9V113_MAX_FRAME_SIZE * 2,
+ 	.u.sensor.ival_default	= { 1, 10 },
+ };
+-#endif
+ 
+ /**
+  * @brief mt9v113_set_prv_data - Returns mt9v113 omap34xx driver private data
+@@ -144,7 +124,6 @@ static struct omap34xxcam_hw_config mt9v113_hwc = {
+  */
+ static int mt9v113_set_prv_data(void *priv)
+ {
+-#if defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE)
+ 	struct omap34xxcam_hw_config *hwc = priv;
+ 
+ 	if (priv == NULL)
+@@ -154,10 +133,8 @@ static int mt9v113_set_prv_data(void *priv)
+ 	hwc->dev_index = mt9v113_hwc.dev_index;
+ 	hwc->dev_minor = mt9v113_hwc.dev_minor;
+ 	hwc->dev_type = mt9v113_hwc.dev_type;
++
+ 	return 0;
+-#else
+-	return -EINVAL;
+-#endif
+ }
+ 
+ /**
+@@ -172,21 +149,22 @@ static int mt9v113_power_set(struct v4l2_int_device *s, enum v4l2_power power)
+ 	struct omap34xxcam_videodev *vdev = s->u.slave->master->priv;
+ 
+ 	switch (power) {
+-	case V4L2_POWER_OFF:
+ 	case V4L2_POWER_STANDBY:
++		break;
++
++	case V4L2_POWER_OFF:
+ 		isp_set_xclk(vdev->cam->isp, 0, CAM_USE_XCLKA);
+ 
+ 		if (regulator_is_enabled(beagle_mt9v113_1_8v1))
+ 			regulator_disable(beagle_mt9v113_1_8v1);
+ 		if (regulator_is_enabled(beagle_mt9v113_1_8v2))
+ 			regulator_disable(beagle_mt9v113_1_8v2);
++
+ 		break;
+ 
+ 	case V4L2_POWER_ON:
+-#if defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE)
+-		isp_configure_interface(vdev->cam->isp, &mt9v113_if_config);
+-#endif
+ 
++		isp_configure_interface(vdev->cam->isp, &mt9v113_if_config);
+ 		/* Set RESET_BAR to 0 */
+ 		gpio_set_value(LEOPARD_RESET_GPIO, 0);
+ 
+@@ -216,8 +194,8 @@ static int mt9v113_power_set(struct v4l2_int_device *s, enum v4l2_power power)
+ 
+ 	default:
+ 		return -ENODEV;
+-		break;
+ 	}
++
+ 	return 0;
+ }
+ 
+@@ -232,9 +210,6 @@ struct mt9v113_platform_data mt9v113_pdata = {
+ 	.vs_polarity	= 1, /* 0 - Active low, 1- Active high */
+ };
+ 
+-#endif				/* #ifdef CONFIG_VIDEO_MT9V113 */
+-
+-
+ static int beagle_cam_probe(struct platform_device *pdev)
+ {
+ 	beagle_mt9v113_1_8v1 = regulator_get(&pdev->dev, "vaux3_1");
+@@ -277,40 +252,6 @@ static int beagle_cam_remove(struct platform_device *pdev)
+ 
+ 	gpio_free(LEOPARD_RESET_GPIO);
+ 
+-	/* MUX init */
+-	omap_ctrl_writew(OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
+-			 0x10C); /* CAM_HS */
+-	omap_ctrl_writew(OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
+-			 0x10E); /* CAM_VS */
+-	omap_ctrl_writew(OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
+-			 0x110); /* CAM_XCLKA */
+-	omap_ctrl_writew(OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
+-			 0x112); /* CAM_PCLK */
+-	omap_ctrl_writew(OMAP_PIN_INPUT | OMAP_MUX_MODE0,
+-			 0x116); /* CAM_D0 */
+-	omap_ctrl_writew(OMAP_PIN_INPUT | OMAP_MUX_MODE0,
+-			 0x118); /* CAM_D1 */
+-	omap_ctrl_writew(OMAP_PIN_INPUT | OMAP_MUX_MODE0,
+-			 0x11A); /* CAM_D2 */
+-	omap_ctrl_writew(OMAP_PIN_INPUT | OMAP_MUX_MODE0,
+-			 0x11C); /* CAM_D3 */
+-	omap_ctrl_writew(OMAP_PIN_INPUT | OMAP_MUX_MODE0,
+-			 0x11E); /* CAM_D4 */
+-	omap_ctrl_writew(OMAP_PIN_INPUT | OMAP_MUX_MODE0,
+-			 0x120); /* CAM_D5 */
+-	omap_ctrl_writew(OMAP_PIN_INPUT | OMAP_MUX_MODE0,
+-			 0x122); /* CAM_D6 */
+-	omap_ctrl_writew(OMAP_PIN_INPUT | OMAP_MUX_MODE0,
+-			 0x124); /* CAM_D7 */
+-	omap_ctrl_writew(OMAP_PIN_INPUT | OMAP_MUX_MODE0,
+-			 0x126); /* CAM_D8 */
+-	omap_ctrl_writew(OMAP_PIN_INPUT | OMAP_MUX_MODE0,
+-			 0x128); /* CAM_D9 */
+-	omap_ctrl_writew(OMAP_PIN_INPUT | OMAP_MUX_MODE0,
+-			 0x12A); /* CAM_D10 */
+-	omap_ctrl_writew(OMAP_PIN_INPUT | OMAP_MUX_MODE0,
+-			 0x12C); /* CAM_D11 */
+-
+ 	return 0;
+ }
+ 
+diff --git a/drivers/media/video/isp/isp.h b/drivers/media/video/isp/isp.h
+index 85c3fa9..4929fad 100644
+--- a/drivers/media/video/isp/isp.h
++++ b/drivers/media/video/isp/isp.h
+@@ -482,10 +482,23 @@ int isp_set_callback(struct device *dev, enum isp_callback_type type,
+ 
+ int isp_unset_callback(struct device *dev, enum isp_callback_type type);
+ 
++#if defined(CONFIG_VIDEO_OMAP3_ISP)
+ u32 isp_set_xclk(struct device *dev, u32 xclk, u8 xclksel);
+ 
+ int isp_configure_interface(struct device *dev,
+ 			    struct isp_interface_config *config);
++#else
++static inline u32 isp_set_xclk(struct device *dev, u32 xclk, u8 xclksel)
++{
++	return 0;
++}
++static inline int isp_configure_interface(struct device *dev,
++			    struct isp_interface_config *config)
++{
++	return 0;
++}
++
++#endif
+ 
+ struct device *isp_get(void);
+ 
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0043-mt9v113-Settings-from-Aptima-used-to-increase-FPS.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0043-mt9v113-Settings-from-Aptima-used-to-increase-FPS.patch
new file mode 100644
index 0000000..262bd30
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0043-mt9v113-Settings-from-Aptima-used-to-increase-FPS.patch
@@ -0,0 +1,135 @@
+From 3f7280192c69d6437c5d0e7c46ab2de345b52e5d Mon Sep 17 00:00:00 2001
+From: Vaibhav Hiremath <hvaibhav@ti.com>
+Date: Wed, 14 Jul 2010 19:07:34 +0530
+Subject: [PATCH 43/75] mt9v113: Settings from Aptima used to increase FPS
+
+The FPS is still low at around ~15FPS, expected one is 30FPS.
+
+Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
+---
+ drivers/media/video/mt9v113.c |   55 +++++++++++++++++++++++++---------------
+ 1 files changed, 34 insertions(+), 21 deletions(-)
+
+diff --git a/drivers/media/video/mt9v113.c b/drivers/media/video/mt9v113.c
+index 9a86cce..466702e 100644
+--- a/drivers/media/video/mt9v113.c
++++ b/drivers/media/video/mt9v113.c
+@@ -119,6 +119,21 @@ static struct mt9v113_reg mt9v113_vga_reg[] = {
+ 	{TOK_WRITE, 0x0990, 0x0280},
+ 	{TOK_WRITE, 0x098C, 0x2705},
+ 	{TOK_WRITE, 0x0990, 0x01E0},
++	{TOK_WRITE, 0x098C, 0x2715},
++	{TOK_WRITE, 0x0990, 0x0001},
++	{TOK_WRITE, 0x098C, 0x2717},
++	{TOK_WRITE, 0x0990, 0x0026},
++	{TOK_WRITE, 0x098C, 0x2719},
++	{TOK_WRITE, 0x0990, 0x001A},
++	{TOK_WRITE, 0x098C, 0x271B},
++	{TOK_WRITE, 0x0990, 0x006B},
++	{TOK_WRITE, 0x098C, 0x271D},
++	{TOK_WRITE, 0x0990, 0x006B},
++	{TOK_WRITE, 0x098C, 0x271F},
++	{TOK_WRITE, 0x0990, 0x0202},
++	{TOK_WRITE, 0x098C, 0x2721},
++	{TOK_WRITE, 0x0990, 0x034A},
++
+ 	{TOK_WRITE, 0x098C, 0xA103},
+ 	{TOK_WRITE, 0x0990, 0x0005},
+ 	{TOK_DELAY, 0, 100},
+@@ -148,8 +163,7 @@ static struct mt9v113_reg mt9v113_reg_list[] = {
+ 	{TOK_WRITE, 0x001E, 0x0777},
+ 	{TOK_WRITE, 0x0016, 0x42DF},
+ 	{TOK_WRITE, 0x0014, 0x2145},
+-	{TOK_WRITE, 0x0014, 0x2145},
+-	{TOK_WRITE, 0x0010, 0x0231},
++	{TOK_WRITE, 0x0010, 0x0234},
+ 	{TOK_WRITE, 0x0012, 0x0000},
+ 	{TOK_WRITE, 0x0014, 0x244B},
+ 	{TOK_WRITE, 0x0014, 0x304B},
+@@ -267,29 +281,31 @@ static struct mt9v113_reg mt9v113_reg_list[] = {
+ 	{TOK_WRITE, 0x0990, 0x0005},
+ 	{TOK_DELAY, 0, 100},
+ 	{TOK_WRITE, 0x098C, 0x222D},
+-	{TOK_WRITE, 0x0990, 0x0088},
++	{TOK_WRITE, 0x0990, 0x0081},
+ 	{TOK_WRITE, 0x098C, 0xA408},
+-	{TOK_WRITE, 0x0990, 0x0020},
++	{TOK_WRITE, 0x0990, 0x001F},
+ 	{TOK_WRITE, 0x098C, 0xA409},
+-	{TOK_WRITE, 0x0990, 0x0023},
++	{TOK_WRITE, 0x0990, 0x0021},
+ 	{TOK_WRITE, 0x098C, 0xA40A},
+-	{TOK_WRITE, 0x0990, 0x0027},
++	{TOK_WRITE, 0x0990, 0x0025},
+ 	{TOK_WRITE, 0x098C, 0xA40B},
+-	{TOK_WRITE, 0x0990, 0x002A},
++	{TOK_WRITE, 0x0990, 0x0027},
+ 	{TOK_WRITE, 0x098C, 0x2411},
+-	{TOK_WRITE, 0x0990, 0x0088},
++	{TOK_WRITE, 0x0990, 0x0081},
+ 	{TOK_WRITE, 0x098C, 0x2413},
+-	{TOK_WRITE, 0x0990, 0x00A4},
++	{TOK_WRITE, 0x0990, 0x009A},
+ 	{TOK_WRITE, 0x098C, 0x2415},
+-	{TOK_WRITE, 0x0990, 0x0088},
++	{TOK_WRITE, 0x0990, 0x0081},
+ 	{TOK_WRITE, 0x098C, 0x2417},
+-	{TOK_WRITE, 0x0990, 0x00A4},
++	{TOK_WRITE, 0x0990, 0x009A},
+ 	{TOK_WRITE, 0x098C, 0xA404},
+ 	{TOK_WRITE, 0x0990, 0x0010},
+ 	{TOK_WRITE, 0x098C, 0xA40D},
+ 	{TOK_WRITE, 0x0990, 0x0002},
+ 	{TOK_WRITE, 0x098C, 0xA40E},
+ 	{TOK_WRITE, 0x0990, 0x0003},
++	{TOK_WRITE, 0x098C, 0xA410},
++	{TOK_WRITE, 0x0990, 0x000A},
+ 	{TOK_WRITE, 0x098C, 0xA103},
+ 	{TOK_WRITE, 0x0990, 0x0006},
+ 	{TOK_DELAY, 0, 100},
+@@ -1216,13 +1232,10 @@ static int ioctl_s_power(struct v4l2_int_device *s, enum v4l2_power on)
+ 	struct mt9v113_decoder *decoder = s->priv;
+ 	int err = 0;
+ 
+-	if (decoder->state == STATE_DETECTED)
+-		return 0;
+-
+ 	switch (on) {
+ 	case V4L2_POWER_OFF:
+ 		/* Power Down Sequence */
+-/* TODO: FIXME: implement proper OFF and Standby code here */
++		/* TODO: FIXME: implement proper OFF and Standby code here */
+ #if 0
+ 		err = mt9v113_write_reg(decoder->client, REG_OPERATION_MODE,
+ 				0x01);
+@@ -1240,10 +1253,10 @@ static int ioctl_s_power(struct v4l2_int_device *s, enum v4l2_power on)
+ 
+ 	case V4L2_POWER_ON:
+ 		/* Enable mux for mt9v113 data path */
+-		if ((decoder->pdata->power_set) &&
+-				(decoder->state == STATE_NOT_DETECTED)) {
++		if (decoder->state == STATE_NOT_DETECTED) {
+ 
+-			err = decoder->pdata->power_set(s, on);
++			if (decoder->pdata->power_set)
++				err = decoder->pdata->power_set(s, on);
+ 
+ 			/* Detect the sensor is not already detected */
+ 			err |= mt9v113_detect(decoder);
+@@ -1252,10 +1265,10 @@ static int ioctl_s_power(struct v4l2_int_device *s, enum v4l2_power on)
+ 						"Unable to detect decoder\n");
+ 				return err;
+ 			}
+-			/* Only VGA mode for now */
+-			err |= mt9v113_configure(decoder);
+-			err |= mt9v113_vga_mode(decoder);
+ 		}
++		/* Only VGA mode for now */
++		err |= mt9v113_configure(decoder);
++		err |= mt9v113_vga_mode(decoder);
+ 		break;
+ 
+ 	default:
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0044-mt9v113-AE-param-tuned-to-get-28-30FPS.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0044-mt9v113-AE-param-tuned-to-get-28-30FPS.patch
new file mode 100644
index 0000000..24e36fc
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0044-mt9v113-AE-param-tuned-to-get-28-30FPS.patch
@@ -0,0 +1,33 @@
+From f33e1a25ca1d7e8418f076a9aead8fa66341f964 Mon Sep 17 00:00:00 2001
+From: Vaibhav Hiremath <hvaibhav@ti.com>
+Date: Thu, 15 Jul 2010 13:53:03 +0530
+Subject: [PATCH 44/75] mt9v113: AE param tuned to get 28~30FPS
+
+Please note that with this change we are compromising with
+image quality, so should be used only in case of high FPS use-case.
+---
+ drivers/media/video/mt9v113.c |    8 ++++++++
+ 1 files changed, 8 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/media/video/mt9v113.c b/drivers/media/video/mt9v113.c
+index 466702e..6714240 100644
+--- a/drivers/media/video/mt9v113.c
++++ b/drivers/media/video/mt9v113.c
+@@ -306,6 +306,14 @@ static struct mt9v113_reg mt9v113_reg_list[] = {
+ 	{TOK_WRITE, 0x0990, 0x0003},
+ 	{TOK_WRITE, 0x098C, 0xA410},
+ 	{TOK_WRITE, 0x0990, 0x000A},
++
++	{TOK_WRITE, 0x098C, 0xA20C},
++	{TOK_WRITE, 0x0990, 0x0003},
++	{TOK_WRITE, 0x098C, 0xA20B},
++	{TOK_WRITE, 0x0990, 0x0000},
++	{TOK_WRITE, 0x098C, 0xA215},
++	{TOK_WRITE, 0x0990, 0x0004},
++
+ 	{TOK_WRITE, 0x098C, 0xA103},
+ 	{TOK_WRITE, 0x0990, 0x0006},
+ 	{TOK_DELAY, 0, 100},
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0045-omap3beagle-camera-Cleanup-of-boardfile.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0045-omap3beagle-camera-Cleanup-of-boardfile.patch
new file mode 100644
index 0000000..6e60351
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0045-omap3beagle-camera-Cleanup-of-boardfile.patch
@@ -0,0 +1,161 @@
+From c442dbd71313f119dce989b0b8d5ebaca9296863 Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Mon, 12 Jul 2010 15:44:18 -0500
+Subject: [PATCH 45/75] omap3beagle: camera: Cleanup of boardfile
+
+This removes a lot of dead code.
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ arch/arm/mach-omap2/board-omap3beagle-camera.c |   51 ++++++++++++++++++------
+ arch/arm/mach-omap2/board-omap3beagle-camera.h |   41 -------------------
+ 2 files changed, 38 insertions(+), 54 deletions(-)
+ delete mode 100644 arch/arm/mach-omap2/board-omap3beagle-camera.h
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle-camera.c b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+index 90eadd0..befa7d4 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle-camera.c
++++ b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+@@ -44,9 +44,6 @@
+ #include <../drivers/media/video/isp/ispreg.h>
+ 
+ #include "mux.h"
+-#include "board-omap3beagle-camera.h"
+-
+-#define MODULE_NAME		"omap3beaglelmb"
+ 
+ #define CAM_USE_XCLKA		0
+ 
+@@ -129,11 +126,7 @@ static int mt9v113_set_prv_data(void *priv)
+ 	if (priv == NULL)
+ 		return -EINVAL;
+ 
+-	hwc->u.sensor = mt9v113_hwc.u.sensor;
+-	hwc->dev_index = mt9v113_hwc.dev_index;
+-	hwc->dev_minor = mt9v113_hwc.dev_minor;
+-	hwc->dev_type = mt9v113_hwc.dev_type;
+-
++	*hwc = mt9v113_hwc;
+ 	return 0;
+ }
+ 
+@@ -204,10 +197,6 @@ struct mt9v113_platform_data mt9v113_pdata = {
+ 	.power_set	= mt9v113_power_set,
+ 	.priv_data_set	= mt9v113_set_prv_data,
+ 	.ifparm		= mt9v113_ifparm,
+-	/* Some interface dependent params */
+-	.clk_polarity	= 0, /* data clocked out on falling edge */
+-	.hs_polarity	= 1, /* 0 - Active low, 1- Active high */
+-	.vs_polarity	= 1, /* 0 - Active low, 1- Active high */
+ };
+ 
+ static int beagle_cam_probe(struct platform_device *pdev)
+@@ -217,6 +206,7 @@ static int beagle_cam_probe(struct platform_device *pdev)
+ 		dev_err(&pdev->dev, "vaux3_1 regulator missing\n");
+ 		return PTR_ERR(beagle_mt9v113_1_8v1);
+ 	}
++
+ 	beagle_mt9v113_1_8v2 = regulator_get(&pdev->dev, "vaux4_1");
+ 	if (IS_ERR(beagle_mt9v113_1_8v2)) {
+ 		dev_err(&pdev->dev, "vaux4_1 regulator missing\n");
+@@ -235,7 +225,41 @@ static int beagle_cam_probe(struct platform_device *pdev)
+ 	/* set to output mode, default value 0 */
+ 	gpio_direction_output(LEOPARD_RESET_GPIO, 0);
+ 
+-	printk(KERN_INFO MODULE_NAME ": Driver registration complete \n");
++	/* MUX init */
++	omap_ctrl_writew(OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
++			 0x10C); /* CAM_HS */
++	omap_ctrl_writew(OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
++			 0x10E); /* CAM_VS */
++	omap_ctrl_writew(OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
++			 0x110); /* CAM_XCLKA */
++	omap_ctrl_writew(OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
++			 0x112); /* CAM_PCLK */
++	omap_ctrl_writew(OMAP_PIN_INPUT | OMAP_MUX_MODE0,
++			 0x116); /* CAM_D0 */
++	omap_ctrl_writew(OMAP_PIN_INPUT | OMAP_MUX_MODE0,
++			 0x118); /* CAM_D1 */
++	omap_ctrl_writew(OMAP_PIN_INPUT | OMAP_MUX_MODE0,
++			 0x11A); /* CAM_D2 */
++	omap_ctrl_writew(OMAP_PIN_INPUT | OMAP_MUX_MODE0,
++			 0x11C); /* CAM_D3 */
++	omap_ctrl_writew(OMAP_PIN_INPUT | OMAP_MUX_MODE0,
++			 0x11E); /* CAM_D4 */
++	omap_ctrl_writew(OMAP_PIN_INPUT | OMAP_MUX_MODE0,
++			 0x120); /* CAM_D5 */
++	omap_ctrl_writew(OMAP_PIN_INPUT | OMAP_MUX_MODE0,
++			 0x122); /* CAM_D6 */
++	omap_ctrl_writew(OMAP_PIN_INPUT | OMAP_MUX_MODE0,
++			 0x124); /* CAM_D7 */
++	omap_ctrl_writew(OMAP_PIN_INPUT | OMAP_MUX_MODE0,
++			 0x126); /* CAM_D8 */
++	omap_ctrl_writew(OMAP_PIN_INPUT | OMAP_MUX_MODE0,
++			 0x128); /* CAM_D9 */
++	omap_ctrl_writew(OMAP_PIN_INPUT | OMAP_MUX_MODE0,
++			 0x12A); /* CAM_D10 */
++	omap_ctrl_writew(OMAP_PIN_INPUT | OMAP_MUX_MODE0,
++			 0x12C); /* CAM_D11 */
++
++	printk(KERN_INFO "omap3beaglelmb: Driver registration complete\n");
+ 
+ 	return 0;
+ }
+@@ -287,6 +311,7 @@ static struct platform_driver beagle_cam_driver = {
+  */
+ int __init omap3beaglelmb_init(void)
+ {
++	/* NOTE: Beagle xM boards are the only ones with camera interface */
+ 	if (cpu_is_omap3630())
+ 		platform_driver_register(&beagle_cam_driver);
+ 
+diff --git a/arch/arm/mach-omap2/board-omap3beagle-camera.h b/arch/arm/mach-omap2/board-omap3beagle-camera.h
+deleted file mode 100644
+index 1026aeb..0000000
+--- a/arch/arm/mach-omap2/board-omap3beagle-camera.h
++++ /dev/null
+@@ -1,41 +0,0 @@
+-/*
+- * Copyright (C) 2010 Texas Instruments Inc
+- * Author: Sergio Aguirre <saaguirre@ti.com>
+- *
+- * Based on work done by:
+- *    Vaibhav Hiremath <hvaibhav@ti.com>
+- *    Anuj Aggarwal <anuj.aggarwal@ti.com>
+- *    Sivaraj R <sivaraj@ti.com>
+- *
+- * This package is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+- *
+- * This program is distributed in the hope that it will be useful,
+- * but WITHOUT ANY WARRANTY; without even the implied warranty of
+- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+- * GNU General Public License for more details.
+- *
+- * You should have received a copy of the GNU General Public License
+- * along with this program; if not, write to the Free Software
+- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+- */
+-
+-#ifndef __BOARD_OMAP3BEAGLE_LMB_H_
+-#define __BOARD_OMAP3BEAGLE_LMB_H_
+-
+-/* mux id to enable/disable signal routing to different peripherals */
+-enum omap3beaglelmb_mux {
+-	MUX_TVP5146 = 0,
+-	MUX_CAMERA_SENSOR,
+-	MUX_EXP_CAMERA_SENSOR,
+-	NUM_MUX
+-};
+-
+-/* enum to enable or disable mux */
+-enum config_mux {
+-	DISABLE_MUX,
+-	ENABLE_MUX
+-};
+-
+-#endif		/* __BOARD_OMAP3BEAGLE_LMB_H_ */
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0046-omap3beagle-camera-Cleanup-regulator-usage.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0046-omap3beagle-camera-Cleanup-regulator-usage.patch
new file mode 100644
index 0000000..cca3262
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0046-omap3beagle-camera-Cleanup-regulator-usage.patch
@@ -0,0 +1,172 @@
+From 240def7eda2939e944ab70726cdecf270865553d Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Mon, 12 Jul 2010 15:53:44 -0500
+Subject: [PATCH 46/75] omap3beagle: camera: Cleanup regulator usage
+
+We were missing the point of regulator abstraction layer.
+
+Camera board file shouldn't be aware of what vaux is using, but
+just asking for a specific power supply (for cam_1v8 and cam_2v8).
+
+How is that mapped before, is something that the regulator machine
+should figure out.
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ arch/arm/mach-omap2/board-omap3beagle-camera.c |   50 ++++++++++++------------
+ arch/arm/mach-omap2/board-omap3beagle.c        |   24 +++++-------
+ 2 files changed, 35 insertions(+), 39 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle-camera.c b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+index befa7d4..c91529d 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle-camera.c
++++ b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+@@ -51,8 +51,8 @@
+ 
+ #define LEOPARD_RESET_GPIO	98
+ 
+-static struct regulator *beagle_mt9v113_1_8v1;
+-static struct regulator *beagle_mt9v113_1_8v2;
++static struct regulator *cam_1v8_reg;
++static struct regulator *cam_2v8_reg;
+ 
+ /* Arbitrary memory handling limit */
+ #define MT9V113_MAX_FRAME_SIZE	PAGE_ALIGN(640 * 480 * 4)
+@@ -148,10 +148,10 @@ static int mt9v113_power_set(struct v4l2_int_device *s, enum v4l2_power power)
+ 	case V4L2_POWER_OFF:
+ 		isp_set_xclk(vdev->cam->isp, 0, CAM_USE_XCLKA);
+ 
+-		if (regulator_is_enabled(beagle_mt9v113_1_8v1))
+-			regulator_disable(beagle_mt9v113_1_8v1);
+-		if (regulator_is_enabled(beagle_mt9v113_1_8v2))
+-			regulator_disable(beagle_mt9v113_1_8v2);
++		if (regulator_is_enabled(cam_1v8_reg))
++			regulator_disable(cam_1v8_reg);
++		if (regulator_is_enabled(cam_2v8_reg))
++			regulator_disable(cam_2v8_reg);
+ 
+ 		break;
+ 
+@@ -162,10 +162,10 @@ static int mt9v113_power_set(struct v4l2_int_device *s, enum v4l2_power power)
+ 		gpio_set_value(LEOPARD_RESET_GPIO, 0);
+ 
+ 		/* turn on VDD */
+-		regulator_enable(beagle_mt9v113_1_8v1);
++		regulator_enable(cam_1v8_reg);
+ 		mdelay(1);
+ 		/* turn on VDD_IO */
+-		regulator_enable(beagle_mt9v113_1_8v2);
++		regulator_enable(cam_2v8_reg);
+ 		mdelay(50);
+ 
+ 		/* Enable EXTCLK */
+@@ -201,24 +201,24 @@ struct mt9v113_platform_data mt9v113_pdata = {
+ 
+ static int beagle_cam_probe(struct platform_device *pdev)
+ {
+-	beagle_mt9v113_1_8v1 = regulator_get(&pdev->dev, "vaux3_1");
+-	if (IS_ERR(beagle_mt9v113_1_8v1)) {
+-		dev_err(&pdev->dev, "vaux3_1 regulator missing\n");
+-		return PTR_ERR(beagle_mt9v113_1_8v1);
++	cam_1v8_reg = regulator_get(&pdev->dev, "cam_1v8");
++	if (IS_ERR(cam_1v8_reg)) {
++		dev_err(&pdev->dev, "cam_1v8 regulator missing\n");
++		return PTR_ERR(cam_1v8_reg);
+ 	}
+ 
+-	beagle_mt9v113_1_8v2 = regulator_get(&pdev->dev, "vaux4_1");
+-	if (IS_ERR(beagle_mt9v113_1_8v2)) {
+-		dev_err(&pdev->dev, "vaux4_1 regulator missing\n");
+-		regulator_put(beagle_mt9v113_1_8v1);
+-		return PTR_ERR(beagle_mt9v113_1_8v2);
++	cam_2v8_reg = regulator_get(&pdev->dev, "cam_2v8");
++	if (IS_ERR(cam_2v8_reg)) {
++		dev_err(&pdev->dev, "cam_2v8 regulator missing\n");
++		regulator_put(cam_1v8_reg);
++		return PTR_ERR(cam_2v8_reg);
+ 	}
+ 
+ 	if (gpio_request(LEOPARD_RESET_GPIO, "cam_rst") != 0) {
+ 		dev_err(&pdev->dev, "Could not request GPIO %d",
+ 			LEOPARD_RESET_GPIO);
+-		regulator_put(beagle_mt9v113_1_8v2);
+-		regulator_put(beagle_mt9v113_1_8v1);
++		regulator_put(cam_2v8_reg);
++		regulator_put(cam_1v8_reg);
+ 		return -ENODEV;
+ 	}
+ 
+@@ -266,13 +266,13 @@ static int beagle_cam_probe(struct platform_device *pdev)
+ 
+ static int beagle_cam_remove(struct platform_device *pdev)
+ {
+-	if (regulator_is_enabled(beagle_mt9v113_1_8v1))
+-		regulator_disable(beagle_mt9v113_1_8v1);
+-	regulator_put(beagle_mt9v113_1_8v1);
++	if (regulator_is_enabled(cam_1v8_reg))
++		regulator_disable(cam_1v8_reg);
++	regulator_put(cam_1v8_reg);
+ 
+-	if (regulator_is_enabled(beagle_mt9v113_1_8v2))
+-		regulator_disable(beagle_mt9v113_1_8v2);
+-	regulator_put(beagle_mt9v113_1_8v2);
++	if (regulator_is_enabled(cam_2v8_reg))
++		regulator_disable(cam_2v8_reg);
++	regulator_put(cam_2v8_reg);
+ 
+ 	gpio_free(LEOPARD_RESET_GPIO);
+ 
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index 6835c1a..a1535ca 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -414,18 +414,14 @@ static struct platform_device beagle_cam_device = {
+ 	.id		= -1,
+ };
+ 
+-static struct regulator_consumer_supply beagle_vaux3_supplies[] = {
+-	{
+-		.supply		= "vaux3_1",
+-		.dev		= &beagle_cam_device.dev,
+-	},
++static struct regulator_consumer_supply beagle_vaux3_supply = {
++	.supply		= "cam_1v8",
++	.dev		= &beagle_cam_device.dev,
+ };
+ 
+-static struct regulator_consumer_supply beagle_vaux4_supplies[] = {
+-	{
+-		.supply		= "vaux4_1",
+-		.dev		= &beagle_cam_device.dev,
+-	},
++static struct regulator_consumer_supply beagle_vaux4_supply = {
++	.supply		= "cam_2v8",
++	.dev		= &beagle_cam_device.dev,
+ };
+ 
+ /* VAUX3 for CAM_1V8 */
+@@ -439,8 +435,8 @@ static struct regulator_init_data beagle_vaux3 = {
+ 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+ 					| REGULATOR_CHANGE_STATUS,
+ 	},
+-	.num_consumer_supplies	= ARRAY_SIZE(beagle_vaux3_supplies),
+-	.consumer_supplies	= beagle_vaux3_supplies,
++	.num_consumer_supplies	= 1,
++	.consumer_supplies	= &beagle_vaux3_supply,
+ };
+ 
+ /* VAUX4 for CAM_2V8 */
+@@ -454,8 +450,8 @@ static struct regulator_init_data beagle_vaux4 = {
+ 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+ 					| REGULATOR_CHANGE_STATUS,
+ 	},
+-	.num_consumer_supplies	= ARRAY_SIZE(beagle_vaux4_supplies),
+-	.consumer_supplies	= beagle_vaux4_supplies,
++	.num_consumer_supplies	= 1,
++	.consumer_supplies	= &beagle_vaux4_supply,
+ };
+ 
+ /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0047-omap3beagle-camera-Bring-back-mt9t111-support.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0047-omap3beagle-camera-Bring-back-mt9t111-support.patch
new file mode 100644
index 0000000..b058200
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0047-omap3beagle-camera-Bring-back-mt9t111-support.patch
@@ -0,0 +1,251 @@
+From 046dac666301c0df22679424169675045c70defd Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Mon, 12 Jul 2010 16:42:41 -0500
+Subject: [PATCH 47/75] omap3beagle: camera: Bring back mt9t111 support
+
+Restore MT9T111 sensor support.
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ arch/arm/mach-omap2/board-omap3beagle-camera.c |  175 +++++++++++++++++++++++-
+ arch/arm/mach-omap2/board-omap3beagle.c        |   12 ++
+ 2 files changed, 184 insertions(+), 3 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle-camera.c b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+index c91529d..2e49158 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle-camera.c
++++ b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+@@ -37,7 +37,6 @@
+ #include <plat/control.h>
+ 
+ #include <media/v4l2-int-device.h>
+-#include <media/mt9v113.h>
+ 
+ /* Include V4L2 ISP-Camera driver related header file */
+ #include <../drivers/media/video/omap34xxcam.h>
+@@ -47,13 +46,16 @@
+ 
+ #define CAM_USE_XCLKA		0
+ 
+-#define ISP_MT9V113_MCLK	216000000
+-
+ #define LEOPARD_RESET_GPIO	98
+ 
+ static struct regulator *cam_1v8_reg;
+ static struct regulator *cam_2v8_reg;
+ 
++#if defined(CONFIG_VIDEO_MT9V113) || defined(CONFIG_VIDEO_MT9V113_MODULE)
++#include <media/mt9v113.h>
++
++#define ISP_MT9V113_MCLK	216000000
++
+ /* Arbitrary memory handling limit */
+ #define MT9V113_MAX_FRAME_SIZE	PAGE_ALIGN(640 * 480 * 4)
+ 
+@@ -199,6 +201,173 @@ struct mt9v113_platform_data mt9v113_pdata = {
+ 	.ifparm		= mt9v113_ifparm,
+ };
+ 
++#endif				/* #ifdef CONFIG_VIDEO_MT9V113 */
++
++#if defined(CONFIG_VIDEO_MT9T111) || defined(CONFIG_VIDEO_MT9T111_MODULE)
++#include <media/mt9t111.h>
++
++#define ISP_MT9T111_MCLK	216000000
++
++/* Arbitrary memory handling limit */
++#define MT9T111_BIGGEST_FRAME_BYTE_SIZE	PAGE_ALIGN((2048 * 2) * 1536 * 4)
++
++static struct isp_interface_config mt9t111_if_config = {
++	.ccdc_par_ser		= ISP_PARLL,
++	.dataline_shift		= 0x2,
++	.hsvs_syncdetect	= ISPCTRL_SYNC_DETECT_VSRISE,
++	.strobe			= 0x0,
++	.prestrobe		= 0x0,
++	.shutter		= 0x0,
++	.cam_mclk		= ISP_MT9T111_MCLK,
++	.wenlog 		= ISPCCDC_CFG_WENLOG_AND,
++	.wait_hs_vs		= 2,
++	.u.par.par_bridge	= 0x3,
++	.u.par.par_clk_pol	= 0x0,
++};
++
++static struct v4l2_ifparm mt9t111_ifparm_s = {
++	.if_type = V4L2_IF_TYPE_RAW,
++	.u 	 = {
++		.raw = {
++			.frame_start_on_rising_vs = 1,
++			.bt_sync_correct	= 0,
++			.swap			= 0,
++			.latch_clk_inv		= 0,
++			.nobt_hs_inv		= 0,	/* active high */
++			.nobt_vs_inv		= 0,	/* active high */
++			.clock_min		= MT9T111_CLK_MIN,
++			.clock_max		= MT9T111_CLK_MAX,
++		},
++	},
++};
++
++/**
++ * @brief mt9t111_ifparm - Returns the mt9t111 interface parameters
++ *
++ * @param p - pointer to v4l2_ifparm structure
++ *
++ * @return result of operation - 0 is success
++ */
++static int mt9t111_ifparm(struct v4l2_ifparm *p)
++{
++	if (p == NULL)
++		return -EINVAL;
++
++	*p = mt9t111_ifparm_s;
++	return 0;
++}
++
++#if defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE)
++static struct omap34xxcam_hw_config mt9t111_hwc = {
++	.dev_index		= 0,
++	.dev_minor		= 0,
++	.dev_type		= OMAP34XXCAM_SLAVE_SENSOR,
++	.u.sensor.sensor_isp	= 0,
++	.u.sensor.capture_mem	= MT9T111_BIGGEST_FRAME_BYTE_SIZE,
++	.u.sensor.ival_default	= { 1, 10 },
++};
++#endif
++
++/**
++ * @brief mt9t111_set_prv_data - Returns mt9t111 omap34xx driver private data
++ *
++ * @param priv - pointer to omap34xxcam_hw_config structure
++ *
++ * @return result of operation - 0 is success
++ */
++static int mt9t111_set_prv_data(void *priv)
++{
++#if defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE)
++	struct omap34xxcam_hw_config *hwc = priv;
++
++	if (priv == NULL)
++		return -EINVAL;
++
++	*hwc = mt9t111_hwc;
++	return 0;
++#else
++	return -EINVAL;
++#endif
++}
++
++/**
++ * @brief mt9t111_power_set - Power-on or power-off TVP5146 device
++ *
++ * @param power - enum, Power on/off, resume/standby
++ *
++ * @return result of operation - 0 is success
++ */
++static int mt9t111_power_set(struct v4l2_int_device *s, enum v4l2_power power)
++{
++	struct omap34xxcam_videodev *vdev = s->u.slave->master->priv;
++
++	switch (power) {
++	case V4L2_POWER_OFF:
++	case V4L2_POWER_STANDBY:
++		isp_set_xclk(vdev->cam->isp, 0, CAM_USE_XCLKA);
++
++		if (regulator_is_enabled(cam_1v8_reg))
++			regulator_disable(cam_1v8_reg);
++		if (regulator_is_enabled(cam_2v8_reg))
++			regulator_disable(cam_2v8_reg);
++		break;
++
++	case V4L2_POWER_ON:
++#if defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE)
++		isp_configure_interface(vdev->cam->isp, &mt9t111_if_config);
++#endif
++
++		/* Set RESET_BAR to 0 */
++		gpio_set_value(LEOPARD_RESET_GPIO, 0);
++
++		/* turn on VDD */
++		regulator_enable(cam_1v8_reg);
++
++		mdelay(1);
++
++		/* turn on VDD_IO */
++		regulator_enable(cam_2v8_reg);
++
++		mdelay(50);
++
++		/* Enable EXTCLK */
++		isp_set_xclk(vdev->cam->isp, MT9T111_CLK_MIN, CAM_USE_XCLKA);
++
++		/*
++		 * Wait at least 70 CLK cycles (w/EXTCLK = 6MHz, or CLK_MIN):
++		 * ((1000000 * 70) / 6000000) = aprox 12 us.
++		 */
++
++		udelay(12);
++
++		/* Set RESET_BAR to 1 */
++		gpio_set_value(LEOPARD_RESET_GPIO, 1);
++
++		/*
++		 * Wait at least 100 CLK cycles (w/EXTCLK = 6MHz, or CLK_MIN):
++		 * ((1000000 * 100) / 6000000) = aprox 17 us.
++		 */
++
++		udelay(17);
++
++		break;
++
++	default:
++		return -ENODEV;
++		break;
++	}
++	return 0;
++}
++
++struct mt9t111_platform_data mt9t111_pdata = {
++	.master		= "omap34xxcam",
++	.power_set	= mt9t111_power_set,
++	.priv_data_set	= mt9t111_set_prv_data,
++	.ifparm		= mt9t111_ifparm,
++};
++
++#endif				/* #ifdef CONFIG_VIDEO_MT9T111 */
++
+ static int beagle_cam_probe(struct platform_device *pdev)
+ {
+ 	cam_1v8_reg = regulator_get(&pdev->dev, "cam_1v8");
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index a1535ca..239bd44 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -77,6 +77,12 @@ static struct omap_opp * _omap37x_l3_rate_table         = NULL;
+ extern struct mt9v113_platform_data mt9v113_pdata;
+ #endif
+ 
++#if defined(CONFIG_VIDEO_MT9T111) || defined(CONFIG_VIDEO_MT9T111_MODULE)
++#include <media/v4l2-int-device.h>
++#include <media/mt9t111.h>
++extern struct mt9t111_platform_data mt9t111_pdata;
++#endif
++
+ #define GPMC_CS0_BASE  0x60
+ #define GPMC_CS_SIZE   0x30
+ 
+@@ -596,6 +602,12 @@ static struct i2c_board_info __initdata beagle_i2c2_boardinfo[] = {
+ 		.platform_data	= &mt9v113_pdata,
+ 	},
+ #endif
++#if defined(CONFIG_VIDEO_MT9T111) || defined(CONFIG_VIDEO_MT9T111_MODULE)
++	{
++		I2C_BOARD_INFO("mt9t111", MT9T111_I2C_ADDR),
++		.platform_data	= &mt9t111_pdata,
++	},
++#endif
+ };
+ 
+ static int __init omap3_beagle_i2c_init(void)
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0048-REMOVE-v4l2-Delete-MT9T111-sensor-driver.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0048-REMOVE-v4l2-Delete-MT9T111-sensor-driver.patch
new file mode 100644
index 0000000..6a9919f
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0048-REMOVE-v4l2-Delete-MT9T111-sensor-driver.patch
@@ -0,0 +1,2402 @@
+From 682012ca5bc9b6e3dc2536736d3eedbad3598d64 Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Thu, 15 Jul 2010 00:50:07 -0500
+Subject: [PATCH 48/75] REMOVE: v4l2: Delete MT9T111 sensor driver
+
+This removes MT9T111 support from the kernel.
+
+Reason? Driver already exists in open source, and we're going to
+reuse that one instead.
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ drivers/media/video/Kconfig       |    8 -
+ drivers/media/video/Makefile      |    1 -
+ drivers/media/video/mt9t111.c     |  885 ------------------------
+ drivers/media/video/mt9t111_reg.h | 1364 -------------------------------------
+ include/media/mt9t111.h           |   79 ---
+ 5 files changed, 0 insertions(+), 2337 deletions(-)
+ delete mode 100644 drivers/media/video/mt9t111.c
+ delete mode 100644 drivers/media/video/mt9t111_reg.h
+ delete mode 100644 include/media/mt9t111.h
+
+diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
+index c14d758..780b246 100644
+--- a/drivers/media/video/Kconfig
++++ b/drivers/media/video/Kconfig
+@@ -354,14 +354,6 @@ config VIDEO_MT9P012
+ 	  MT9P012 camera.  It is currently working with the TI OMAP3
+ 	  camera controller.
+ 
+-config VIDEO_MT9T111
+-	tristate "Micron MT9T111 raw sensor driver (3MP)"
+-	depends on I2C && VIDEO_V4L2
+-	---help---
+-	  This is a Video4Linux2 sensor-level driver for the Micron
+-	  MT9T111 camera.  It is currently working with the TI OMAP3
+-	  camera controller.
+-
+ config VIDEO_DW9710
+ 	tristate "Lens driver for DW9710"
+ 	depends on I2C && VIDEO_V4L2
+diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
+index 763c157..3828723 100644
+--- a/drivers/media/video/Makefile
++++ b/drivers/media/video/Makefile
+@@ -128,7 +128,6 @@ obj-$(CONFIG_VIDEO_CAFE_CCIC) += cafe_ccic.o
+ obj-y				+= isp/
+ obj-$(CONFIG_VIDEO_OMAP3)	+= omap34xxcam.o
+ obj-$(CONFIG_VIDEO_MT9P012)     += mt9p012.o
+-obj-$(CONFIG_VIDEO_MT9T111)     += mt9t111.o
+ obj-$(CONFIG_VIDEO_DW9710)	+= dw9710.o
+ obj-$(CONFIG_VIDEO_TPS61059)    += tps61059.o
+ obj-$(CONFIG_VIDEO_OV3640)	+= ov3640.o
+diff --git a/drivers/media/video/mt9t111.c b/drivers/media/video/mt9t111.c
+deleted file mode 100644
+index 10080af..0000000
+--- a/drivers/media/video/mt9t111.c
++++ /dev/null
+@@ -1,885 +0,0 @@
+-/*
+- * drivers/media/video/mt9t111.c
+- *
+- * mt9t111 sensor driver
+- *
+- * Copyright (C) 2009 Leopard Imaging
+- *
+- * This file is licensed under the terms of the GNU General Public License
+- * version 2. This program is licensed "as is" without any warranty of any
+- * kind, whether express or implied.
+- */
+-
+-#include <linux/i2c.h>
+-#include <linux/delay.h>
+-#include <media/v4l2-int-device.h>
+-
+-#include <media/mt9t111.h>
+-#include "mt9t111_reg.h"
+-
+-/* YCbCr mode does not work yet */
+-#define USE_RAW
+-/* Create a Color bar test pattern, Blue, Green, Red, Grey */
+-/* #define COLOR_BAR */
+-
+-#define SENSOR_DETECTED		1
+-#define SENSOR_NOT_DETECTED	0
+-
+-static void mt9t111_loaddefault(struct i2c_client *client);
+-
+-/*
+- * as a place holder for further development
+- */
+-static void debug_dummy(char *in_msg)
+-{
+-}
+-
+-/* list of image formats supported by mt9t111 sensor */
+-const static struct v4l2_fmtdesc mt9t111_formats[] = {
+-#ifdef USE_RAW
+-	{
+-		.description    = "RAW ",
+-		.pixelformat    = V4L2_PIX_FMT_SGRBG10,
+-	},
+-#else
+-	{
+-		.description    = "YUV 422 ",
+-		.pixelformat    = V4L2_PIX_FMT_YUYV,
+-	},
+-#endif
+-};
+-
+-#define NUM_CAPTURE_FORMATS ARRAY_SIZE(mt9t111_formats)
+-
+-/*
+- * Array of image sizes supported by MT9T111.  These must be ordered from
+- * smallest image size to largest.
+- */
+-const static struct capture_size mt9t111_sizes[] = {
+-	{  640, 480 },
+-	/* { 2048, 1536} */
+-};
+-
+-#define NUM_CAPTURE_SIZE ARRAY_SIZE(mt9t111_sizes)
+-
+-
+-const struct v4l2_fract mt9t111_frameintervals[] = {
+-	{  .numerator = 1, .denominator = 10 }
+-};
+-
+-#define NUM_CAPTURE_FRAMEINTERVALS ARRAY_SIZE(mt9t111_frameintervals)
+-
+-/**
+- * struct mt9t111_sensor - main structure for storage of sensor information
+- * @pdata: access functions and data for platform level information
+- * @v4l2_int_device: V4L2 device structure structure
+- * @i2c_client: iic client device structure
+- * @pix: V4L2 pixel format information structure
+- * @timeperframe: time per frame expressed as V4L fraction
+- * @scaler:
+- * @ver: mt9t111 chip version
+- * @fps: frames per second value
+- */
+-struct mt9t111_sensor {
+-	const struct mt9t111_platform_data *pdata;
+-	struct v4l2_int_device *v4l2_int_device;
+-	struct i2c_client *i2c_client;
+-	struct v4l2_pix_format pix;
+-	struct v4l2_fract timeperframe;
+-	int scaler;
+-	int ver;
+-	int fps;
+-	int state;
+-};
+-
+-static struct mt9t111_sensor mt9t111 = {
+-	.timeperframe = {
+-		.numerator = 1,
+-		.denominator = 10,
+-	},
+-	.state = SENSOR_NOT_DETECTED,
+-};
+-
+-/**
+- * mt9t111_read_reg - Read a value from a register in an mt9t111 sensor device
+- * @client: i2c driver client structure
+- * @data_length: length of data to be read
+- * @reg: register address / offset
+- * @val: stores the value that gets read
+- *
+- * Read a value from a register in an mt9t111 sensor device.
+- * The value is returned in 'val'.
+- * Returns zero if successful, or non-zero otherwise.
+- */
+-static int
+-mt9t111_read_reg(struct i2c_client *client, u16 reg, u16 *val)
+-{
+-	struct i2c_msg msg[1];
+-	u8 data[4];
+-	int err;
+-
+-	msg->addr = client->addr;
+-	msg->flags = 0;
+-	msg->len = 2;
+-	msg->buf = data;
+-	data[0] = (reg & 0xff00) >> 8;
+-	data[1] = (reg & 0x00ff);
+-	err = i2c_transfer(client->adapter, msg, 1);
+-	if (err >= 0) {
+-		msg->flags = I2C_M_RD;
+-		msg->len = 2;	/* 2 byte read */
+-		err = i2c_transfer(client->adapter, msg, 1);
+-		if (err >= 0) {
+-			*val = ((data[0] & 0x00ff) << 8)
+-				| (data[1] & 0x00ff);
+-			return 0;
+-		}
+-	}
+-	return err;
+-}
+-
+-/**
+- * mt9t111_write_reg - Write a value to a register in an mt9t111 sensor device
+- * @client: i2c driver client structure
+- * @data_length: length of data to be read
+- * @reg: register address / offset
+- * @val: value to be written to specified register
+- *
+- * Write a value to a register in an mt9t111 sensor device.
+- * Returns zero if successful, or non-zero otherwise.
+- */
+-static int
+-mt9t111_write_reg(struct i2c_client *client, u16 reg, u16 val)
+-{
+-	struct i2c_msg msg[1];
+-	u8 data[20];
+-	int err;
+-
+-	msg->addr = client->addr;
+-	msg->flags = 0;
+-	msg->len = 4;
+-	msg->buf = data;
+-	data[0] = (u8)((reg & 0xff00) >> 8);
+-	data[1] = (u8)(reg & 0x00ff);
+-	data[2] = (u8)((val & 0xff00) >> 8);
+-	data[3] = (u8)(val & 0x00ff);
+-	err = i2c_transfer(client->adapter, msg, 1);
+-
+-	return err;
+-}
+-
+-/**
+- * mt9t111_write_regs - Write registers to an mt9t111 sensor device
+- * @client: i2c driver client structure
+- * @reg_in: pointer to registers to write
+- * @cnt: the number of registers
+- *
+- * Write registers .
+- * Returns zero if successful, or non-zero otherwise.
+- */
+-static int
+-mt9t111_write_regs(struct i2c_client *client, mt9t111_regs *reg_in, int cnt)
+-{
+-	int err = 0;
+-	int i;
+-	mt9t111_regs *reg = reg_in;
+-
+-	for (i = 0; i < cnt; i++) {
+-		if (reg->delay_time == 0) {
+-			err |= mt9t111_write_reg(client, reg->addr, reg->data);
+-		} else if (reg->addr != 0 || reg->data != 0) {
+-			err |= mt9t111_write_reg(client, reg->addr, reg->data);
+-			mdelay(reg->delay_time);
+-		} else {
+-			mdelay(reg->delay_time);
+-		}
+-
+-		if (err < 0) {
+-			dev_warn(&client->dev, "write reg error, addr = 0x%x,"
+-						" data = 0x%x \n",
+-						reg->addr, reg->data);
+-			return err;
+-		}
+-		reg++;
+-	}
+-	return err;
+-}
+-
+-/**
+- * mt9t111_detect - Detect if an mt9t111 is present, and if so which revision
+- * @client: pointer to the i2c client driver structure
+- *
+- * Detect if an mt9t111 is present
+- * Returns a negative error number if no device is detected, or the
+- * non-negative value of the version ID register if a device is detected.
+- */
+-static int
+-mt9t111_detect(struct i2c_client *client)
+-{
+-	u16 val;
+-
+-	/* chip ID is at address 0 */
+-	if (mt9t111_read_reg(client, MT9T111_CHIP_ID, &val) < 0)
+-		return -ENODEV;
+-
+-	if (val != MT9T111_CHIP_ID_VALUE) {
+-		dev_warn(&client->dev, "model id mismatch received 0x%x"
+-				       " expecting 0x%x\n",
+-				       val, MT9T111_CHIP_ID_VALUE);
+-
+-		return -ENODEV;
+-	}
+-
+-	return (int)val;
+-
+-}
+-
+-/**
+- * mt9t111_configure - Configure the mt9t111 for the specified image mode
+- * @s: pointer to standard V4L2 device structure
+- *
+- * Configure the mt9t111 for a specified image size, pixel format, and frame
+- * period.  xclk is the frequency (in Hz) of the xclk input to the mt9t111.
+- * fper is the frame period (in seconds) expressed as a fraction.
+- * Returns zero if successful, or non-zero otherwise.
+- * The actual frame period is returned in fper.
+- */
+-static int mt9t111_configure(struct v4l2_int_device *s)
+-{
+-	debug_dummy("debug_dummy -- to set imager mode");
+-
+-	return 0;
+-}
+-
+-/**
+- * ioctl_enum_framesizes - V4L2 sensor if handler for vidioc_int_enum_framesizes
+- * @s: pointer to standard V4L2 device structure
+- * @frms: pointer to standard V4L2 framesizes enumeration structure
+- *
+- * Returns possible framesizes depending on choosen pixel format
+- **/
+-static int ioctl_enum_framesizes(struct v4l2_int_device *s,
+-					struct v4l2_frmsizeenum *frms)
+-{
+-	int ifmt;
+-
+-	for (ifmt = 0; ifmt < NUM_CAPTURE_FORMATS; ifmt++) {
+-		if (frms->pixel_format == mt9t111_formats[ifmt].pixelformat)
+-			break;
+-	}
+-	/* Is requested pixelformat not found on sensor? */
+-	if (ifmt == NUM_CAPTURE_FORMATS)
+-		return -EINVAL;
+-
+-	/* Do we already reached all discrete framesizes? */
+-	if (frms->index >= NUM_CAPTURE_SIZE)
+-		return -EINVAL;
+-
+-	frms->type = V4L2_FRMSIZE_TYPE_DISCRETE;
+-	frms->discrete.width = mt9t111_sizes[frms->index].width;
+-	frms->discrete.height = mt9t111_sizes[frms->index].height;
+-
+-	return 0;
+-
+-}
+-
+-static int ioctl_enum_frameintervals(struct v4l2_int_device *s,
+-					struct v4l2_frmivalenum *frmi)
+-{
+-	int ifmt;
+-
+-	if (frmi->index >= NUM_CAPTURE_FRAMEINTERVALS)
+-		return -EINVAL;
+-
+-	for (ifmt = 0; ifmt < NUM_CAPTURE_FORMATS; ifmt++) {
+-		if (frmi->pixel_format == mt9t111_formats[ifmt].pixelformat)
+-			break;
+-	}
+-	/* Is requested pixelformat not found on sensor? */
+-	if (ifmt == NUM_CAPTURE_FORMATS)
+-		return -EINVAL;
+-
+-	frmi->type = V4L2_FRMSIZE_TYPE_DISCRETE;
+-	frmi->discrete.numerator =
+-				mt9t111_frameintervals[frmi->index].numerator;
+-	frmi->discrete.denominator =
+-				mt9t111_frameintervals[frmi->index].denominator;
+-	return 0;
+-}
+-
+-/**
+- * ioctl_init - V4L2 sensor interface handler for VIDIOC_INT_INIT
+- * @s: pointer to standard V4L2 device structure
+- *
+- * Initialize the sensor device (call mt9t111_configure())
+- */
+-static int ioctl_init(struct v4l2_int_device *s)
+-{
+-	return 0;
+-}
+-
+-/**
+- * ioctl_dev_exit - V4L2 sensor interface handler for vidioc_int_dev_exit_num
+- * @s: pointer to standard V4L2 device structure
+- *
+- * Delinitialise the dev. at slave detach.  The complement of ioctl_dev_init.
+- */
+-static int ioctl_dev_exit(struct v4l2_int_device *s)
+-{
+-	return 0;
+-}
+-
+-/**
+- * ioctl_dev_init - V4L2 sensor interface handler for vidioc_int_dev_init_num
+- * @s: pointer to standard V4L2 device structure
+- *
+- * Initialise the device when slave attaches to the master.  Returns 0 if
+- * mt9t111 device could be found, otherwise returns appropriate error.
+- */
+-static int ioctl_dev_init(struct v4l2_int_device *s)
+-{
+-	return 0;
+-}
+-
+-/**
+- * ioctl_s_power - V4L2 sensor interface handler for vidioc_int_s_power_num
+- * @s: pointer to standard V4L2 device structure
+- * @on: power state to which device is to be set
+- *
+- * Sets devices power state to requrested state, if possible.
+- */
+-static int ioctl_s_power(struct v4l2_int_device *s, enum v4l2_power on)
+-{
+-	struct mt9t111_sensor *sensor = s->priv;
+-	struct i2c_client *c = sensor->i2c_client;
+-	int rval;
+-
+-	if ((on == V4L2_POWER_STANDBY) && (sensor->state == SENSOR_DETECTED))
+-		debug_dummy("debug_dummy -- put to standby\n");
+-
+-	if (on != V4L2_POWER_ON)
+-		debug_dummy("debug_dummy -- stop master clock\n");
+-	else
+-		debug_dummy("debug_dummy -- enable clock\n");;
+-
+-	rval = sensor->pdata->power_set(s, on);
+-	if (rval < 0) {
+-		dev_err(&c->dev, "Unable to set the power state: " "mt9t111"
+-								" sensor\n");
+-		/* sensor->pdata->set_xclk(0); */
+-		return rval;
+-	}
+-
+-	if ((on == V4L2_POWER_ON) && (sensor->state == SENSOR_DETECTED))
+-		mt9t111_loaddefault(c);
+-
+-	if ((on == V4L2_POWER_ON) && (sensor->state == SENSOR_NOT_DETECTED)) {
+-		rval = mt9t111_detect(c);
+-		if (rval < 0) {
+-			dev_err(&c->dev, "Unable to detect " "mt9t111"
+-								" sensor\n");
+-			sensor->state = SENSOR_NOT_DETECTED;
+-			return rval;
+-		}
+-		dev_info(&c->dev, "chip version 0x%02x detected\n", rval);
+-		sensor->state = SENSOR_DETECTED;
+-		sensor->ver = rval;
+-	}
+-	return 0;
+-}
+-
+-/**
+- * ioctl_g_priv - V4L2 sensor interface handler for vidioc_int_g_priv_num
+- * @s: pointer to standard V4L2 device structure
+- * @p: void pointer to hold sensor's private data address
+- *
+- * Returns device's (sensor's) private data area address in p parameter
+- */
+-static int ioctl_g_priv(struct v4l2_int_device *s, void *p)
+-{
+-	struct mt9t111_sensor *sensor = s->priv;
+-
+-	return sensor->pdata->priv_data_set(p);
+-}
+-
+-/**
+- * ioctl_s_parm - V4L2 sensor interface handler for VIDIOC_S_PARM ioctl
+- * @s: pointer to standard V4L2 device structure
+- * @a: pointer to standard V4L2 VIDIOC_S_PARM ioctl structure
+- *
+- * Configures the sensor to use the input parameters, if possible.  If
+- * not possible, reverts to the old parameters and returns the
+- * appropriate error code.
+- */
+-static int ioctl_s_parm(struct v4l2_int_device *s,
+-			     struct v4l2_streamparm *a)
+-{
+-	/* TODO: set paramters */
+-	debug_dummy("debug_dummy -- VIDIOC_S_PARM ");
+-	return 0;
+-}
+-
+-/**
+- * ioctl_g_parm - V4L2 sensor interface handler for VIDIOC_G_PARM ioctl
+- * @s: pointer to standard V4L2 device structure
+- * @a: pointer to standard V4L2 VIDIOC_G_PARM ioctl structure
+- *
+- * Returns the sensor's video CAPTURE parameters.
+- */
+-static int ioctl_g_parm(struct v4l2_int_device *s,
+-			     struct v4l2_streamparm *a)
+-{
+-	struct mt9t111_sensor *sensor = s->priv;
+-	struct v4l2_captureparm *cparm = &a->parm.capture;
+-
+-	if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+-		return -EINVAL;
+-
+-	memset(a, 0, sizeof(*a));
+-	a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+-
+-	cparm->capability = V4L2_CAP_TIMEPERFRAME;
+-	cparm->timeperframe = sensor->timeperframe;
+-
+-	return 0;
+-}
+-
+-/**
+- * ioctl_g_fmt_cap - V4L2 sensor interface handler for ioctl_g_fmt_cap
+- * @s: pointer to standard V4L2 device structure
+- * @f: pointer to standard V4L2 v4l2_format structure
+- *
+- * Returns the sensor's current pixel format in the v4l2_format
+- * parameter.
+- */
+-static int ioctl_g_fmt_cap(struct v4l2_int_device *s,
+-				struct v4l2_format *f)
+-{
+-	struct mt9t111_sensor *sensor = s->priv;
+-	f->fmt.pix = sensor->pix;
+-
+-	return 0;
+-}
+-
+-/**
+- * ioctl_try_fmt_cap - Implement the CAPTURE buffer VIDIOC_TRY_FMT ioctl
+- * @s: pointer to standard V4L2 device structure
+- * @f: pointer to standard V4L2 VIDIOC_TRY_FMT ioctl structure
+- *
+- * Implement the VIDIOC_TRY_FMT ioctl for the CAPTURE buffer type.  This
+- * ioctl is used to negotiate the image capture size and pixel format
+- * without actually making it take effect.
+- */
+-static int ioctl_try_fmt_cap(struct v4l2_int_device *s,
+-			     struct v4l2_format *f)
+-{
+-	struct v4l2_pix_format *pix = &f->fmt.pix;
+-	struct mt9t111_sensor *sensor = s->priv;
+-	struct v4l2_pix_format *pix2 = &sensor->pix;
+-
+-	pix->width = 640;
+-	pix->height = 480;
+-#ifdef USE_RAW
+-	pix->pixelformat = V4L2_PIX_FMT_SGRBG10;
+-	pix->bytesperline = pix->width;
+-	pix->colorspace =  V4L2_COLORSPACE_SRGB;
+-#else
+-	pix->pixelformat = V4L2_PIX_FMT_YUYV;
+-	pix->bytesperline = pix->width * 2;
+-	pix->colorspace = V4L2_COLORSPACE_JPEG;
+-#endif
+-	pix->field = V4L2_FIELD_NONE;
+-
+-	pix->sizeimage = pix->bytesperline * pix->height;
+-	pix->priv = 0;
+-	*pix2 = *pix;
+-	return 0;
+-}
+-
+-/**
+- * ioctl_s_fmt_cap - V4L2 sensor interface handler for VIDIOC_S_FMT ioctl
+- * @s: pointer to standard V4L2 device structure
+- * @f: pointer to standard V4L2 VIDIOC_S_FMT ioctl structure
+- *
+- * If the requested format is supported, configures the HW to use that
+- * format, returns error code if format not supported or HW can't be
+- * correctly configured.
+- */
+-static int ioctl_s_fmt_cap(struct v4l2_int_device *s,
+-				struct v4l2_format *f)
+-{
+-	struct mt9t111_sensor *sensor = s->priv;
+-	struct v4l2_pix_format *pix = &f->fmt.pix;
+-	int rval;
+-
+-	rval = ioctl_try_fmt_cap(s, f);
+-	if (!rval)
+-		sensor->pix = *pix;
+-
+-	return rval;
+-}
+-
+-/**
+- * ioctl_enum_fmt_cap - Implement the CAPTURE buffer VIDIOC_ENUM_FMT ioctl
+- * @s: pointer to standard V4L2 device structure
+- * @fmt: standard V4L2 VIDIOC_ENUM_FMT ioctl structure
+- *
+- * Implement the VIDIOC_ENUM_FMT ioctl for the CAPTURE buffer type.
+- */
+-static int ioctl_enum_fmt_cap(struct v4l2_int_device *s,
+-				   struct v4l2_fmtdesc *fmt)
+-{
+-	int index = fmt->index;
+-	enum v4l2_buf_type type = fmt->type;
+-
+-	memset(fmt, 0, sizeof(*fmt));
+-	fmt->index = index;
+-	fmt->type = type;
+-
+-	switch (fmt->type) {
+-	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+-		if (index >= NUM_CAPTURE_FORMATS)
+-			return -EINVAL;
+-	break;
+-	default:
+-		return -EINVAL;
+-	}
+-
+-	fmt->flags = mt9t111_formats[index].flags;
+-	strlcpy(fmt->description, mt9t111_formats[index].description,
+-					sizeof(fmt->description));
+-	fmt->pixelformat = mt9t111_formats[index].pixelformat;
+-
+-	return 0;
+-}
+-
+-/**
+- * ioctl_s_ctrl - V4L2 sensor interface handler for VIDIOC_S_CTRL ioctl
+- * @s: pointer to standard V4L2 device structure
+- * @vc: standard V4L2 VIDIOC_S_CTRL ioctl structure
+- *
+- * If the requested control is supported, sets the control's current
+- * value in HW (and updates the video_control[] array).  Otherwise,
+- * returns -EINVAL if the control is not supported.
+- */
+-static int ioctl_s_ctrl(struct v4l2_int_device *s,
+-			     struct v4l2_control *vc)
+-{
+-	debug_dummy("debug_dummy -- s ctrl\n");
+-	return 0;
+-}
+-
+-/**
+- * ioctl_g_ctrl - V4L2 sensor interface handler for VIDIOC_G_CTRL ioctl
+- * @s: pointer to standard V4L2 device structure
+- * @vc: standard V4L2 VIDIOC_G_CTRL ioctl structure
+- *
+- * If the requested control is supported, returns the control's current
+- * value from the video_control[] array.  Otherwise, returns -EINVAL
+- * if the control is not supported.
+- */
+-static int ioctl_g_ctrl(struct v4l2_int_device *s,
+-			     struct v4l2_control *vc)
+-{
+-	debug_dummy("debug_dummy -- g ctrl\n");
+-	return 0;
+-}
+-
+-/**
+- * ioctl_queryctrl - V4L2 sensor interface handler for VIDIOC_QUERYCTRL ioctl
+- * @s: pointer to standard V4L2 device structure
+- * @qc: standard V4L2 VIDIOC_QUERYCTRL ioctl structure
+- *
+- * If the requested control is supported, returns the control information
+- * from the video_control[] array.  Otherwise, returns -EINVAL if the
+- * control is not supported.
+- */
+-static int ioctl_queryctrl(struct v4l2_int_device *s,
+-				struct v4l2_queryctrl *qc)
+-{
+-	debug_dummy("debug_dummy -- query ctrl\n");
+-	return -EINVAL;
+-}
+-
+-/**
+- * ioctl_s_routing - V4L2 decoder interface handler for VIDIOC_S_INPUT ioctl
+- * @s: pointer to standard V4L2 device structure
+- * @index: number of the input
+- *
+- * If index is valid, selects the requested input. Otherwise, returns -EINVAL if
+- * the input is not supported or there is no active signal present in the
+- * selected input.
+- */
+-static int ioctl_s_routing(struct v4l2_int_device *s,
+-				struct v4l2_routing *route)
+-{
+-	return 0;
+-}
+-
+-/**
+- * ioctl_g_ifparm - V4L2 decoder interface handler for vidioc_int_g_ifparm_num
+- * @s: pointer to standard V4L2 device structure
+- * @p: pointer to standard V4L2 vidioc_int_g_ifparm_num ioctl structure
+- *
+- * Gets slave interface parameters.
+- * Calculates the required xclk value to support the requested
+- * clock parameters in p. This value is returned in the p
+- * parameter.
+- */
+-static int ioctl_g_ifparm(struct v4l2_int_device *s, struct v4l2_ifparm *p)
+-{
+-	struct mt9t111_sensor *sensor = s->priv;
+-	int rval;
+-
+-	if (p == NULL)
+-		return -EINVAL;
+-
+-	if (NULL == sensor->pdata->ifparm)
+-		return -EINVAL;
+-
+-	rval = sensor->pdata->ifparm(p);
+-	if (rval) {
+-		v4l_err(sensor->i2c_client, "g_ifparm.Err[%d]\n", rval);
+-		return rval;
+-	}
+-
+-	p->u.ycbcr.clock_curr = 40 * 1000000; /* temporal value */
+-
+-	return 0;
+-}
+-
+-static struct v4l2_int_ioctl_desc mt9t111_ioctl_desc[] = {
+-	{ .num = vidioc_int_enum_framesizes_num,
+-	  .func = (v4l2_int_ioctl_func *)ioctl_enum_framesizes },
+-	{ .num = vidioc_int_enum_frameintervals_num,
+-	  .func = (v4l2_int_ioctl_func *)ioctl_enum_frameintervals },
+-	{ .num = vidioc_int_dev_init_num,
+-	  .func = (v4l2_int_ioctl_func *)ioctl_dev_init },
+-	{ .num = vidioc_int_dev_exit_num,
+-	  .func = (v4l2_int_ioctl_func *)ioctl_dev_exit },
+-	{ .num = vidioc_int_s_power_num,
+-	  .func = (v4l2_int_ioctl_func *)ioctl_s_power },
+-	{ .num = vidioc_int_g_priv_num,
+-	  .func = (v4l2_int_ioctl_func *)ioctl_g_priv },
+-	{ .num = vidioc_int_g_ifparm_num,
+-	  .func = (v4l2_int_ioctl_func *)ioctl_g_ifparm },
+-	{ .num = vidioc_int_init_num,
+-	  .func = (v4l2_int_ioctl_func *)ioctl_init },
+-	{ .num = vidioc_int_enum_fmt_cap_num,
+-	  .func = (v4l2_int_ioctl_func *)ioctl_enum_fmt_cap },
+-	{ .num = vidioc_int_try_fmt_cap_num,
+-	  .func = (v4l2_int_ioctl_func *)ioctl_try_fmt_cap },
+-	{ .num = vidioc_int_g_fmt_cap_num,
+-	  .func = (v4l2_int_ioctl_func *)ioctl_g_fmt_cap },
+-	{ .num = vidioc_int_s_fmt_cap_num,
+-	  .func = (v4l2_int_ioctl_func *)ioctl_s_fmt_cap },
+-	{ .num = vidioc_int_g_parm_num,
+-	  .func = (v4l2_int_ioctl_func *)ioctl_g_parm },
+-	{ .num = vidioc_int_s_parm_num,
+-	  .func = (v4l2_int_ioctl_func *)ioctl_s_parm },
+-	{ .num = vidioc_int_queryctrl_num,
+-	  .func = (v4l2_int_ioctl_func *)ioctl_queryctrl },
+-	{ .num = vidioc_int_g_ctrl_num,
+-	  .func = (v4l2_int_ioctl_func *)ioctl_g_ctrl },
+-	{ .num = vidioc_int_s_ctrl_num,
+-	  .func = (v4l2_int_ioctl_func *)ioctl_s_ctrl },
+-	{ .num = vidioc_int_s_video_routing_num,
+-	  .func = (v4l2_int_ioctl_func *)ioctl_s_routing },
+-};
+-
+-static void mt9t111_refresh(struct i2c_client *client)
+-{
+-	int i;
+-	unsigned short value;
+-	/* MCU_ADDRESS [SEQ_CMD] -- refresh */
+-	mt9t111_write_reg(client, 0x098E, 0x8400);
+-	mt9t111_write_reg(client, 0x0990, 0x0006);
+-	for (i = 0; i < 100; i++) {
+-		mt9t111_write_reg(client, 0x098E, 0x8400);
+-		mt9t111_read_reg(client, 0x0990, &value);
+-		if (value == 0)
+-			break;
+-		mdelay(5);
+-	}
+-}
+-
+-#ifdef COLOR_BAR
+-static void mt9t111_color_bar(struct i2c_client *client)
+-{
+-	mt9t111_write_reg(client, 0x3210, 0x01B0); /* disable lens correction */
+-
+-	mt9t111_write_reg(client, 0x098E, 0x6003);
+-	mt9t111_write_reg(client, 0x0990, 0x0100);
+-	mt9t111_write_reg(client, 0x098E, 0x6025);
+-	mt9t111_write_reg(client, 0x0990, 0x0003);
+-}
+-#endif
+-
+-static void mt9t111_bayer_format(struct i2c_client *client)
+-{
+-	mt9t111_write_regs(client, bayer_pattern_regs,
+-			   sizeof(bayer_pattern_regs) / sizeof(mt9t111_regs));
+-}
+-
+-static void mt9t111_enable_pll(struct i2c_client *client)
+-{
+-	int i;
+-	unsigned short value;
+-
+-	mt9t111_write_regs(client, pll_regs1,
+-			   sizeof(pll_regs1) / sizeof(mt9t111_regs));
+-	for (i = 0; i < 100; i++) {
+-		mt9t111_read_reg(client, 0x0014, &value);
+-		if ((value & 0x8000) != 0)
+-			break;
+-		mdelay(2);
+-	}
+-	mt9t111_write_regs(client, pll_regs2,
+-			   sizeof(pll_regs2) / sizeof(mt9t111_regs));
+-}
+-
+-
+-static void mt9t111_loaddefault(struct i2c_client *client)
+-{
+-	mt9t111_write_reg(client, 0x001A, 0x0219);
+-	mt9t111_write_reg(client, 0x001A, 0x0218);
+-
+-	mt9t111_enable_pll(client);
+-	mt9t111_write_regs(client, def_regs1,
+-			   sizeof(def_regs1) / sizeof(mt9t111_regs));
+-	mt9t111_write_regs(client, patch_rev6,
+-			   sizeof(patch_rev6) / sizeof(mt9t111_regs));
+-	mt9t111_write_regs(client, def_regs2,
+-			   sizeof(def_regs2) / sizeof(mt9t111_regs));
+-
+-#ifdef USE_RAW
+-	mt9t111_bayer_format(client);
+-#endif
+-
+-#ifdef COLOR_BAR
+-	mt9t111_color_bar(client);
+-#endif
+-
+-	mt9t111_refresh(client);
+-}
+-
+-static struct v4l2_int_slave mt9t111_slave = {
+-	.ioctls = mt9t111_ioctl_desc,
+-	.num_ioctls = ARRAY_SIZE(mt9t111_ioctl_desc),
+-};
+-
+-static struct v4l2_int_device mt9t111_int_device = {
+-	.module = THIS_MODULE,
+-	.name = "mt9t111",
+-	.priv = &mt9t111,
+-	.type = v4l2_int_type_slave,
+-	.u = {
+-		.slave = &mt9t111_slave,
+-	},
+-};
+-
+-/**
+- * mt9t111_probe - sensor driver i2c probe handler
+- * @client: i2c driver client device structure
+- *
+- * Register sensor as an i2c client device and V4L2
+- * device.
+- */
+-static int
+-mt9t111_probe(struct i2c_client *client, const struct i2c_device_id *id)
+-{
+-	struct mt9t111_sensor *sensor = &mt9t111;
+-	int err;
+-
+-	if (i2c_get_clientdata(client))
+-		return -EBUSY;
+-
+-	sensor->pdata = client->dev.platform_data;
+-
+-	if (!sensor->pdata) {
+-		dev_err(&client->dev, "no platform data?\n");
+-		return -ENODEV;
+-	}
+-
+-	sensor->v4l2_int_device = &mt9t111_int_device;
+-	sensor->i2c_client = client;
+-
+-	i2c_set_clientdata(client, sensor);
+-
+-	sensor->pix.width = 640;
+-	sensor->pix.height = 480;
+-#ifdef USE_RAW
+-	sensor->pix.pixelformat = V4L2_PIX_FMT_SGRBG10;
+-#else
+-	sensor->pix.pixelformat = V4L2_PIX_FMT_YUYV;
+-#endif
+-	err = v4l2_int_device_register(sensor->v4l2_int_device);
+-	if (err)
+-		i2c_set_clientdata(client, NULL);
+-	return err;
+-}
+-
+-/**
+- * mt9t111_remove - sensor driver i2c remove handler
+- * @client: i2c driver client device structure
+- *
+- * Unregister sensor as an i2c client device and V4L2
+- * device.  Complement of mt9t111_probe().
+- */
+-static int __exit
+-mt9t111_remove(struct i2c_client *client)
+-{
+-	struct mt9t111_sensor *sensor = i2c_get_clientdata(client);
+-
+-	if (!client->adapter)
+-		return -ENODEV;	/* our client isn't attached */
+-
+-	v4l2_int_device_unregister(sensor->v4l2_int_device);
+-	i2c_set_clientdata(client, NULL);
+-
+-	return 0;
+-}
+-
+-static const struct i2c_device_id mt9t111_id[] = {
+-	{ "mt9t111", 0 },
+-	{ },
+-};
+-MODULE_DEVICE_TABLE(i2c, mt9t111_id);
+-
+-static struct i2c_driver mt9t111sensor_i2c_driver = {
+-	.driver = {
+-		.name = "mt9t111",
+-		.owner = THIS_MODULE,
+-	},
+-	.probe = mt9t111_probe,
+-	.remove = __exit_p(mt9t111_remove),
+-	.id_table = mt9t111_id,
+-};
+-
+-/**
+- * mt9t111sensor_init - sensor driver module_init handler
+- *
+- * Registers driver as an i2c client driver.  Returns 0 on success,
+- * error code otherwise.
+- */
+-static int __init mt9t111sensor_init(void)
+-{
+-printk(KERN_INFO "entering mt9t111sensor_init\n");
+-	return i2c_add_driver(&mt9t111sensor_i2c_driver);
+-}
+-module_init(mt9t111sensor_init);
+-
+-/**
+- * mt9t111sensor_cleanup - sensor driver module_exit handler
+- *
+- * Unregisters/deletes driver as an i2c client driver.
+- * Complement of mt9t111sensor_init.
+- */
+-static void __exit mt9t111sensor_cleanup(void)
+-{
+-	i2c_del_driver(&mt9t111sensor_i2c_driver);
+-}
+-module_exit(mt9t111sensor_cleanup);
+-
+-MODULE_LICENSE("GPL");
+-MODULE_DESCRIPTION("mt9t111 camera sensor driver");
+diff --git a/drivers/media/video/mt9t111_reg.h b/drivers/media/video/mt9t111_reg.h
+deleted file mode 100644
+index e226c37..0000000
+--- a/drivers/media/video/mt9t111_reg.h
++++ /dev/null
+@@ -1,1364 +0,0 @@
+-/*
+- * drivers/media/video/mt9t111_reg.h
+- *
+- * mt9t111 sensor driver header file
+- *
+- * Copyright (C) 2009 Leopard Imaging
+- *
+- * This file is licensed under the terms of the GNU General Public License
+- * version 2. This program is licensed "as is" without any warranty of any
+- * kind, whether express or implied.
+- */
+-
+-#ifndef MT9T111_REG_H
+-#define MT9T111_REG_H
+-
+-/* register addr */
+-#define MT9T111_CHIP_ID 		(0x0000)
+-
+-/* register value */
+-#define MT9T111_CHIP_ID_VALUE	(0x2680)
+-
+-typedef struct {
+-	u16 delay_time;
+-	u16 addr;
+-	u16 data;
+-} mt9t111_regs;
+-
+-mt9t111_regs patch_rev6[] = {
+-	{0, 0x0982, 0x0},
+-	{0, 0x098A, 0xCE7},
+-	{0, 0x0990, 0x3C3C},
+-	{0, 0x0992, 0x3C3C},
+-	{0, 0x0994, 0x3C5F},
+-	{0, 0x0996, 0x4F30},
+-	{0, 0x0998, 0xED08},
+-	{0, 0x099a, 0xBD61},
+-	{0, 0x099c, 0xD5CE},
+-	{0, 0x099e, 0x4CD},
+-	{0, 0x098A, 0xCF7},
+-	{0, 0x0990, 0x1F17},
+-	{0, 0x0992, 0x211},
+-	{0, 0x0994, 0xCC33},
+-	{0, 0x0996, 0x2E30},
+-	{0, 0x0998, 0xED02},
+-	{0, 0x099a, 0xCCFF},
+-	{0, 0x099c, 0xFDED},
+-	{0, 0x099e, 0xCC},
+-	{0, 0x098A, 0xD07},
+-	{0, 0x0990, 0x2},
+-	{0, 0x0992, 0xBD70},
+-	{0, 0x0994, 0x6D18},
+-	{0, 0x0996, 0xDE1F},
+-	{0, 0x0998, 0x181F},
+-	{0, 0x099a, 0x8E01},
+-	{0, 0x099c, 0x10CC},
+-	{0, 0x099e, 0x3C52},
+-	{0, 0x098A, 0xD17},
+-	{0, 0x0990, 0x30ED},
+-	{0, 0x0992, 0x18},
+-	{0, 0x0994, 0xECA0},
+-	{0, 0x0996, 0xC4FD},
+-	{0, 0x0998, 0xBD70},
+-	{0, 0x099a, 0x2120},
+-	{0, 0x099c, 0x1ECC},
+-	{0, 0x099e, 0x3C52},
+-	{0, 0x098A, 0xD27},
+-	{0, 0x0990, 0x30ED},
+-	{0, 0x0992, 0xDE},
+-	{0, 0x0994, 0x1FEC},
+-	{0, 0x0996, 0xA0BD},
+-	{0, 0x0998, 0x7021},
+-	{0, 0x099a, 0xCC3C},
+-	{0, 0x099c, 0x5230},
+-	{0, 0x099e, 0xED02},
+-	{0, 0x098A, 0xD37},
+-	{0, 0x0990, 0xCCFF},
+-	{0, 0x0992, 0xFCED},
+-	{0, 0x0994, 0xCC},
+-	{0, 0x0996, 0x2},
+-	{0, 0x0998, 0xBD70},
+-	{0, 0x099a, 0x6DFC},
+-	{0, 0x099c, 0x4E1},
+-	{0, 0x099e, 0x1A83},
+-	{0, 0x098A, 0xD47},
+-	{0, 0x0990, 0x1},
+-	{0, 0x0992, 0x2720},
+-	{0, 0x0994, 0x1A83},
+-	{0, 0x0996, 0x4},
+-	{0, 0x0998, 0x271E},
+-	{0, 0x099a, 0x1A83},
+-	{0, 0x099c, 0x8},
+-	{0, 0x099e, 0x271C},
+-	{0, 0x098A, 0xD57},
+-	{0, 0x0990, 0x1A83},
+-	{0, 0x0992, 0x10},
+-	{0, 0x0994, 0x271A},
+-	{0, 0x0996, 0x1A83},
+-	{0, 0x0998, 0x20},
+-	{0, 0x099a, 0x2718},
+-	{0, 0x099c, 0x1A83},
+-	{0, 0x099e, 0x40},
+-	{0, 0x098A, 0xD67},
+-	{0, 0x0990, 0x2716},
+-	{0, 0x0992, 0x2019},
+-	{0, 0x0994, 0xC61E},
+-	{0, 0x0996, 0x2012},
+-	{0, 0x0998, 0xC622},
+-	{0, 0x099a, 0x200E},
+-	{0, 0x099c, 0xC621},
+-	{0, 0x099e, 0x200A},
+-	{0, 0x098A, 0xD77},
+-	{0, 0x0990, 0xC620},
+-	{0, 0x0992, 0x2006},
+-	{0, 0x0994, 0xC62A},
+-	{0, 0x0996, 0x2002},
+-	{0, 0x0998, 0xC62B},
+-	{0, 0x099a, 0x30ED},
+-	{0, 0x099c, 0x8CC},
+-	{0, 0x099e, 0x3400},
+-	{0, 0x098A, 0xD87},
+-	{0, 0x0990, 0x30ED},
+-	{0, 0x0992, 0x34},
+-	{0, 0x0994, 0xBD6F},
+-	{0, 0x0996, 0xD184},
+-	{0, 0x0998, 0x330},
+-	{0, 0x099a, 0xED07},
+-	{0, 0x099c, 0xA60A},
+-	{0, 0x099e, 0x4848},
+-	{0, 0x098A, 0xD97},
+-	{0, 0x0990, 0x5FED},
+-	{0, 0x0992, 0x5EA},
+-	{0, 0x0994, 0x8AA},
+-	{0, 0x0996, 0x731},
+-	{0, 0x0998, 0xBD70},
+-	{0, 0x099a, 0x2130},
+-	{0, 0x099c, 0xC60A},
+-	{0, 0x099e, 0x3A35},
+-	{0, 0x098A, 0xDA7},
+-	{0, 0x0990, 0x3937},
+-	{0, 0x0992, 0x3C3C},
+-	{0, 0x0994, 0x3C34},
+-	{0, 0x0996, 0xDE2F},
+-	{0, 0x0998, 0xEE0E},
+-	{0, 0x099a, 0xAD00},
+-	{0, 0x099c, 0x7D13},
+-	{0, 0x099e, 0xEF27},
+-	{0, 0x098A, 0xDB7},
+-	{0, 0x0990, 0x7CCE},
+-	{0, 0x0992, 0x13E0},
+-	{0, 0x0994, 0x1E05},
+-	{0, 0x0996, 0x1060},
+-	{0, 0x0998, 0xE60E},
+-	{0, 0x099a, 0x4FC3},
+-	{0, 0x099c, 0x13F0},
+-	{0, 0x099e, 0x8FE6},
+-	{0, 0x098A, 0xDC7},
+-	{0, 0x0990, 0x30},
+-	{0, 0x0992, 0xE107},
+-	{0, 0x0994, 0x2216},
+-	{0, 0x0996, 0xF613},
+-	{0, 0x0998, 0xEE4F},
+-	{0, 0x099a, 0xC313},
+-	{0, 0x099c, 0xF38F},
+-	{0, 0x099e, 0xE600},
+-	{0, 0x098A, 0xDD7},
+-	{0, 0x0990, 0x30E1},
+-	{0, 0x0992, 0x725},
+-	{0, 0x0994, 0x7F6},
+-	{0, 0x0996, 0x13EE},
+-	{0, 0x0998, 0xC103},
+-	{0, 0x099a, 0x253C},
+-	{0, 0x099c, 0x7F13},
+-	{0, 0x099e, 0xEEF6},
+-	{0, 0x098A, 0xDE7},
+-	{0, 0x0990, 0x13EF},
+-	{0, 0x0992, 0xE706},
+-	{0, 0x0994, 0xCC13},
+-	{0, 0x0996, 0xF0ED},
+-	{0, 0x0998, 0x4CC},
+-	{0, 0x099a, 0x13F3},
+-	{0, 0x099c, 0x200F},
+-	{0, 0x099e, 0x7C13},
+-	{0, 0x098A, 0xDF7},
+-	{0, 0x0990, 0xEEEC},
+-	{0, 0x0992, 0x4C3},
+-	{0, 0x0994, 0x1},
+-	{0, 0x0996, 0xED04},
+-	{0, 0x0998, 0xEC02},
+-	{0, 0x099a, 0xC300},
+-	{0, 0x099c, 0x1ED},
+-	{0, 0x099e, 0x2F6},
+-	{0, 0x098A, 0xE07},
+-	{0, 0x0990, 0x13EE},
+-	{0, 0x0992, 0xE106},
+-	{0, 0x0994, 0x2412},
+-	{0, 0x0996, 0xEE04},
+-	{0, 0x0998, 0xE600},
+-	{0, 0x099a, 0x30E1},
+-	{0, 0x099c, 0x722},
+-	{0, 0x099e, 0xDFEE},
+-	{0, 0x098A, 0xE17},
+-	{0, 0x0990, 0x2E6},
+-	{0, 0x0992, 0x30},
+-	{0, 0x0994, 0xE107},
+-	{0, 0x0996, 0x25D6},
+-	{0, 0x0998, 0xDE49},
+-	{0, 0x099a, 0xEE08},
+-	{0, 0x099c, 0xAD00},
+-	{0, 0x099e, 0xCC13},
+-	{0, 0x098A, 0xE27},
+-	{0, 0x0990, 0xF630},
+-	{0, 0x0992, 0xED00},
+-	{0, 0x0994, 0xDE2F},
+-	{0, 0x0996, 0xEE10},
+-	{0, 0x0998, 0xCC13},
+-	{0, 0x099a, 0xFAAD},
+-	{0, 0x099c, 0x38},
+-	{0, 0x099e, 0x3838},
+-	{0, 0x098A, 0xE37},
+-	{0, 0x0990, 0x3839},
+-	{0, 0x098A, 0x1000},
+-	{0, 0x0990, 0xCC10},
+-	{0, 0x0992, 0x9BD},
+-	{0, 0x0994, 0x4224},
+-	{0, 0x0996, 0x7E10},
+-	{0, 0x0998, 0x9C6},
+-	{0, 0x099a, 0x1F7},
+-	{0, 0x099c, 0x18A},
+-	{0, 0x099e, 0xC606},
+-	{0, 0x098A, 0x1010},
+-	{0, 0x0990, 0xF701},
+-	{0, 0x0992, 0x8BDE},
+-	{0, 0x0994, 0x3F18},
+-	{0, 0x0996, 0xCE0B},
+-	{0, 0x0998, 0xF1CC},
+-	{0, 0x099a, 0x11},
+-	{0, 0x099c, 0xBDD7},
+-	{0, 0x099e, 0xCC},
+-	{0, 0x098A, 0x1020},
+-	{0, 0x0990, 0xBF1},
+-	{0, 0x0992, 0xDD3F},
+-	{0, 0x0994, 0xDE35},
+-	{0, 0x0996, 0x18CE},
+-	{0, 0x0998, 0xC03},
+-	{0, 0x099a, 0xCC00},
+-	{0, 0x099c, 0x3FBD},
+-	{0, 0x099e, 0xD700},
+-	{0, 0x098A, 0x1030},
+-	{0, 0x0990, 0xCC0C},
+-	{0, 0x0992, 0x3DD},
+-	{0, 0x0994, 0x35DE},
+-	{0, 0x0996, 0x4718},
+-	{0, 0x0998, 0xCE0C},
+-	{0, 0x099a, 0x43CC},
+-	{0, 0x099c, 0x15},
+-	{0, 0x099e, 0xBDD7},
+-	{0, 0x098A, 0x1040},
+-	{0, 0x0990, 0xCC},
+-	{0, 0x0992, 0xC43},
+-	{0, 0x0994, 0xDD47},
+-	{0, 0x0996, 0xFE00},
+-	{0, 0x0998, 0x3318},
+-	{0, 0x099a, 0xCE0C},
+-	{0, 0x099c, 0x59CC},
+-	{0, 0x099e, 0x9},
+-	{0, 0x098A, 0x1050},
+-	{0, 0x0990, 0xBDD7},
+-	{0, 0x0992, 0xCC},
+-	{0, 0x0994, 0xC59},
+-	{0, 0x0996, 0xFD00},
+-	{0, 0x0998, 0x33DE},
+-	{0, 0x099a, 0x4118},
+-	{0, 0x099c, 0xCE0C},
+-	{0, 0x099e, 0x63CC},
+-	{0, 0x098A, 0x1060},
+-	{0, 0x0990, 0xD},
+-	{0, 0x0992, 0xBDD7},
+-	{0, 0x0994, 0xCC},
+-	{0, 0x0996, 0xC63},
+-	{0, 0x0998, 0xDD41},
+-	{0, 0x099a, 0xFE00},
+-	{0, 0x099c, 0x3118},
+-	{0, 0x099e, 0xCE0C},
+-	{0, 0x098A, 0x1070},
+-	{0, 0x0990, 0x71CC},
+-	{0, 0x0992, 0x29},
+-	{0, 0x0994, 0xBDD7},
+-	{0, 0x0996, 0xCC},
+-	{0, 0x0998, 0xC71},
+-	{0, 0x099a, 0xFD00},
+-	{0, 0x099c, 0x31DE},
+-	{0, 0x099e, 0x3918},
+-	{0, 0x098A, 0x1080},
+-	{0, 0x0990, 0xCE0C},
+-	{0, 0x0992, 0x9BCC},
+-	{0, 0x0994, 0x23},
+-	{0, 0x0996, 0xBDD7},
+-	{0, 0x0998, 0xCC},
+-	{0, 0x099a, 0xC9B},
+-	{0, 0x099c, 0xDD39},
+-	{0, 0x099e, 0xDE49},
+-	{0, 0x098A, 0x1090},
+-	{0, 0x0990, 0x18CE},
+-	{0, 0x0992, 0xCBF},
+-	{0, 0x0994, 0xCC00},
+-	{0, 0x0996, 0xDBD},
+-	{0, 0x0998, 0xD700},
+-	{0, 0x099a, 0xCC0C},
+-	{0, 0x099c, 0xBFDD},
+-	{0, 0x099e, 0x49CC},
+-	{0, 0x098A, 0x10A0},
+-	{0, 0x0990, 0x1162},
+-	{0, 0x0992, 0xFD0B},
+-	{0, 0x0994, 0xFDCC},
+-	{0, 0x0996, 0xCE7},
+-	{0, 0x0998, 0xFD0C},
+-	{0, 0x099a, 0x1FCC},
+-	{0, 0x099c, 0x1245},
+-	{0, 0x099e, 0xFD0C},
+-	{0, 0x098A, 0x10B0},
+-	{0, 0x0990, 0x51CC},
+-	{0, 0x0992, 0x110B},
+-	{0, 0x0994, 0xFD0C},
+-	{0, 0x0996, 0x5BCC},
+-	{0, 0x0998, 0x1108},
+-	{0, 0x099a, 0xFD0C},
+-	{0, 0x099c, 0x65CC},
+-	{0, 0x099e, 0x10D0},
+-	{0, 0x098A, 0x10C0},
+-	{0, 0x0990, 0xFD0C},
+-	{0, 0x0992, 0x7BCC},
+-	{0, 0x0994, 0x12DE},
+-	{0, 0x0996, 0xFD0C},
+-	{0, 0x0998, 0xA7CC},
+-	{0, 0x099a, 0xDA8},
+-	{0, 0x099c, 0xFD0C},
+-	{0, 0x099e, 0xCB39},
+-	{0, 0x098A, 0x10D0},
+-	{0, 0x0990, 0x37DE},
+-	{0, 0x0992, 0x1DEC},
+-	{0, 0x0994, 0xC5F},
+-	{0, 0x0996, 0x8402},
+-	{0, 0x0998, 0x4416},
+-	{0, 0x099a, 0x4FF7},
+-	{0, 0x099c, 0xCCD},
+-	{0, 0x099e, 0xE60B},
+-	{0, 0x098A, 0x10E0},
+-	{0, 0x0990, 0xC407},
+-	{0, 0x0992, 0xF70C},
+-	{0, 0x0994, 0xCE7F},
+-	{0, 0x0996, 0x30C4},
+-	{0, 0x0998, 0xEC25},
+-	{0, 0x099a, 0xFD30},
+-	{0, 0x099c, 0xC5FC},
+-	{0, 0x099e, 0x6D6},
+-	{0, 0x098A, 0x10F0},
+-	{0, 0x0990, 0xFD30},
+-	{0, 0x0992, 0xC701},
+-	{0, 0x0994, 0xFC30},
+-	{0, 0x0996, 0xC0FD},
+-	{0, 0x0998, 0xBED},
+-	{0, 0x099a, 0xFC30},
+-	{0, 0x099c, 0xC2FD},
+-	{0, 0x099e, 0xBEF},
+-	{0, 0x098A, 0x1100},
+-	{0, 0x0990, 0x30E6},
+-	{0, 0x0992, 0xBD},
+-	{0, 0x0994, 0x5203},
+-	{0, 0x0996, 0x3139},
+-	{0, 0x0998, 0x7E9E},
+-	{0, 0x099a, 0x143C},
+-	{0, 0x099c, 0x3C3C},
+-	{0, 0x099e, 0x2101},
+-	{0, 0x098A, 0x1110},
+-	{0, 0x0990, 0xCC00},
+-	{0, 0x0992, 0x18BD},
+-	{0, 0x0994, 0x6FD1},
+-	{0, 0x0996, 0xC504},
+-	{0, 0x0998, 0x26F5},
+-	{0, 0x099a, 0xDC25},
+-	{0, 0x099c, 0x30ED},
+-	{0, 0x099e, 0x420},
+-	{0, 0x098A, 0x1120},
+-	{0, 0x0990, 0x12EE},
+-	{0, 0x0992, 0x43C},
+-	{0, 0x0994, 0x1838},
+-	{0, 0x0996, 0xE621},
+-	{0, 0x0998, 0x18E7},
+-	{0, 0x099a, 0xBE30},
+-	{0, 0x099c, 0xEE04},
+-	{0, 0x099e, 0xEC1D},
+-	{0, 0x098A, 0x1130},
+-	{0, 0x0990, 0x30ED},
+-	{0, 0x0992, 0x4EC},
+-	{0, 0x0994, 0x426},
+-	{0, 0x0996, 0xEACC},
+-	{0, 0x0998, 0x1A},
+-	{0, 0x099a, 0xED02},
+-	{0, 0x099c, 0xCCFB},
+-	{0, 0x099e, 0xFFED},
+-	{0, 0x098A, 0x1140},
+-	{0, 0x0990, 0xCC},
+-	{0, 0x0992, 0x400},
+-	{0, 0x0994, 0xBD70},
+-	{0, 0x0996, 0x6DCC},
+-	{0, 0x0998, 0x1A},
+-	{0, 0x099a, 0x30ED},
+-	{0, 0x099c, 0x2CC},
+-	{0, 0x099e, 0xFBFF},
+-	{0, 0x098A, 0x1150},
+-	{0, 0x0990, 0xED00},
+-	{0, 0x0992, 0x5F4F},
+-	{0, 0x0994, 0xBD70},
+-	{0, 0x0996, 0x6D5F},
+-	{0, 0x0998, 0xBD5B},
+-	{0, 0x099a, 0x17BD},
+-	{0, 0x099c, 0x558B},
+-	{0, 0x099e, 0x3838},
+-	{0, 0x098A, 0x1160},
+-	{0, 0x0990, 0x3839},
+-	{0, 0x0992, 0x3C3C},
+-	{0, 0x0994, 0xC640},
+-	{0, 0x0996, 0xF730},
+-	{0, 0x0998, 0xC4FC},
+-	{0, 0x099a, 0xBED},
+-	{0, 0x099c, 0xFD30},
+-	{0, 0x099e, 0xC0FC},
+-	{0, 0x098A, 0x1170},
+-	{0, 0x0990, 0xBEF},
+-	{0, 0x0992, 0xFD30},
+-	{0, 0x0994, 0xC2DE},
+-	{0, 0x0996, 0x1DEC},
+-	{0, 0x0998, 0x25FD},
+-	{0, 0x099a, 0x30C5},
+-	{0, 0x099c, 0x101},
+-	{0, 0x099e, 0x1FC},
+-	{0, 0x098A, 0x1180},
+-	{0, 0x0990, 0x30C2},
+-	{0, 0x0992, 0xFD06},
+-	{0, 0x0994, 0xD6EC},
+-	{0, 0x0996, 0xC5F},
+-	{0, 0x0998, 0x8402},
+-	{0, 0x099a, 0x4416},
+-	{0, 0x099c, 0x4F30},
+-	{0, 0x099e, 0xE703},
+-	{0, 0x098A, 0x1190},
+-	{0, 0x0990, 0xF10C},
+-	{0, 0x0992, 0xCD27},
+-	{0, 0x0994, 0x15F1},
+-	{0, 0x0996, 0xCCD},
+-	{0, 0x0998, 0x2309},
+-	{0, 0x099a, 0xFC06},
+-	{0, 0x099c, 0xD604},
+-	{0, 0x099e, 0xFD06},
+-	{0, 0x098A, 0x11A0},
+-	{0, 0x0990, 0xD620},
+-	{0, 0x0992, 0x7FC},
+-	{0, 0x0994, 0x6D6},
+-	{0, 0x0996, 0x5FD},
+-	{0, 0x0998, 0x6D6},
+-	{0, 0x099a, 0xDE1D},
+-	{0, 0x099c, 0xE60B},
+-	{0, 0x099e, 0xC407},
+-	{0, 0x098A, 0x11B0},
+-	{0, 0x0990, 0x30E7},
+-	{0, 0x0992, 0x2F1},
+-	{0, 0x0994, 0xCCE},
+-	{0, 0x0996, 0x272C},
+-	{0, 0x0998, 0x7D0C},
+-	{0, 0x099a, 0xCE27},
+-	{0, 0x099c, 0x275D},
+-	{0, 0x099e, 0x2724},
+-	{0, 0x098A, 0x11C0},
+-	{0, 0x0990, 0x7F30},
+-	{0, 0x0992, 0xC4FC},
+-	{0, 0x0994, 0x6D6},
+-	{0, 0x0996, 0xFD30},
+-	{0, 0x0998, 0xC5F6},
+-	{0, 0x099a, 0xCCE},
+-	{0, 0x099c, 0x4FFD},
+-	{0, 0x099e, 0x30C7},
+-	{0, 0x098A, 0x11D0},
+-	{0, 0x0990, 0xC640},
+-	{0, 0x0992, 0xF730},
+-	{0, 0x0994, 0xC4E6},
+-	{0, 0x0996, 0x24F},
+-	{0, 0x0998, 0xFD30},
+-	{0, 0x099a, 0xC501},
+-	{0, 0x099c, 0x101},
+-	{0, 0x099e, 0xFC30},
+-	{0, 0x098A, 0x11E0},
+-	{0, 0x0990, 0xC2FD},
+-	{0, 0x0992, 0x6D6},
+-	{0, 0x0994, 0x7D06},
+-	{0, 0x0996, 0xCB27},
+-	{0, 0x0998, 0x2EC6},
+-	{0, 0x099a, 0x40F7},
+-	{0, 0x099c, 0x30C4},
+-	{0, 0x099e, 0xFC06},
+-	{0, 0x098A, 0x11F0},
+-	{0, 0x0990, 0xC104},
+-	{0, 0x0992, 0xF306},
+-	{0, 0x0994, 0xD6ED},
+-	{0, 0x0996, 0x5F},
+-	{0, 0x0998, 0x6D00},
+-	{0, 0x099a, 0x2A01},
+-	{0, 0x099c, 0x5317},
+-	{0, 0x099e, 0xFD30},
+-	{0, 0x098A, 0x1200},
+-	{0, 0x0990, 0xC0EC},
+-	{0, 0x0992, 0xFD},
+-	{0, 0x0994, 0x30C2},
+-	{0, 0x0996, 0xFC06},
+-	{0, 0x0998, 0xC1FD},
+-	{0, 0x099a, 0x30C5},
+-	{0, 0x099c, 0x101},
+-	{0, 0x099e, 0x1FC},
+-	{0, 0x098A, 0x1210},
+-	{0, 0x0990, 0x30C2},
+-	{0, 0x0992, 0xFD06},
+-	{0, 0x0994, 0xC720},
+-	{0, 0x0996, 0x227F},
+-	{0, 0x0998, 0x30C4},
+-	{0, 0x099a, 0xDE1D},
+-	{0, 0x099c, 0xEC25},
+-	{0, 0x099e, 0xFD30},
+-	{0, 0x098A, 0x1220},
+-	{0, 0x0990, 0xC5FC},
+-	{0, 0x0992, 0x6D6},
+-	{0, 0x0994, 0xFD30},
+-	{0, 0x0996, 0xC701},
+-	{0, 0x0998, 0xFC30},
+-	{0, 0x099a, 0xC0FD},
+-	{0, 0x099c, 0x6D0},
+-	{0, 0x099e, 0xFC30},
+-	{0, 0x098A, 0x1230},
+-	{0, 0x0990, 0xC2FD},
+-	{0, 0x0992, 0x6D2},
+-	{0, 0x0994, 0xEC25},
+-	{0, 0x0996, 0xFD06},
+-	{0, 0x0998, 0xC3BD},
+-	{0, 0x099a, 0x953C},
+-	{0, 0x099c, 0xDE3F},
+-	{0, 0x099e, 0xEE10},
+-	{0, 0x098A, 0x1240},
+-	{0, 0x0990, 0xAD00},
+-	{0, 0x0992, 0x3838},
+-	{0, 0x0994, 0x3930},
+-	{0, 0x0996, 0x8FC3},
+-	{0, 0x0998, 0xFFE9},
+-	{0, 0x099a, 0x8F35},
+-	{0, 0x099c, 0xBDAD},
+-	{0, 0x099e, 0x1530},
+-	{0, 0x098A, 0x1250},
+-	{0, 0x0990, 0x6F16},
+-	{0, 0x0992, 0x18DE},
+-	{0, 0x0994, 0x1918},
+-	{0, 0x0996, 0x8FC3},
+-	{0, 0x0998, 0x14B},
+-	{0, 0x099a, 0x188F},
+-	{0, 0x099c, 0x18EC},
+-	{0, 0x099e, 0xFD},
+-	{0, 0x098A, 0x1260},
+-	{0, 0x0990, 0x50E},
+-	{0, 0x0992, 0x18EC},
+-	{0, 0x0994, 0x2FD},
+-	{0, 0x0996, 0x510},
+-	{0, 0x0998, 0xE616},
+-	{0, 0x099a, 0x4FED},
+-	{0, 0x099c, 0x418},
+-	{0, 0x099e, 0x8FC3},
+-	{0, 0x098A, 0x1270},
+-	{0, 0x0990, 0xFFCB},
+-	{0, 0x0992, 0xE304},
+-	{0, 0x0994, 0x8FE6},
+-	{0, 0x0996, 0xF7},
+-	{0, 0x0998, 0x514},
+-	{0, 0x099a, 0x18DE},
+-	{0, 0x099c, 0x1930},
+-	{0, 0x099e, 0xE616},
+-	{0, 0x098A, 0x1280},
+-	{0, 0x0990, 0x4FED},
+-	{0, 0x0992, 0x418},
+-	{0, 0x0994, 0x8FC3},
+-	{0, 0x0996, 0x119},
+-	{0, 0x0998, 0xE304},
+-	{0, 0x099a, 0x8FE6},
+-	{0, 0x099c, 0xF7},
+-	{0, 0x099e, 0x515},
+-	{0, 0x098A, 0x1290},
+-	{0, 0x0990, 0xFC05},
+-	{0, 0x0992, 0x5BFD},
+-	{0, 0x0994, 0x512},
+-	{0, 0x0996, 0xDE37},
+-	{0, 0x0998, 0xEE08},
+-	{0, 0x099a, 0xAD00},
+-	{0, 0x099c, 0x30E6},
+-	{0, 0x099e, 0x164F},
+-	{0, 0x098A, 0x12A0},
+-	{0, 0x0990, 0x5ED},
+-	{0, 0x0992, 0x48F},
+-	{0, 0x0994, 0xC300},
+-	{0, 0x0996, 0x630},
+-	{0, 0x0998, 0xE304},
+-	{0, 0x099a, 0x8FF6},
+-	{0, 0x099c, 0x516},
+-	{0, 0x099e, 0x4FED},
+-	{0, 0x098A, 0x12B0},
+-	{0, 0x0990, 0x30},
+-	{0, 0x0992, 0x6C16},
+-	{0, 0x0994, 0xE616},
+-	{0, 0x0996, 0xC103},
+-	{0, 0x0998, 0x2598},
+-	{0, 0x099a, 0xCC32},
+-	{0, 0x099c, 0x8EED},
+-	{0, 0x099e, 0xEC},
+-	{0, 0x098A, 0x12C0},
+-	{0, 0x0990, 0x6BD},
+-	{0, 0x0992, 0x7021},
+-	{0, 0x0994, 0xCC32},
+-	{0, 0x0996, 0x6C30},
+-	{0, 0x0998, 0xED02},
+-	{0, 0x099a, 0xCCF8},
+-	{0, 0x099c, 0xED},
+-	{0, 0x099e, 0xA6},
+-	{0, 0x098A, 0x12D0},
+-	{0, 0x0990, 0x9E3},
+-	{0, 0x0992, 0xA84},
+-	{0, 0x0994, 0x7BD},
+-	{0, 0x0996, 0x706D},
+-	{0, 0x0998, 0x30C6},
+-	{0, 0x099a, 0x173A},
+-	{0, 0x099c, 0x3539},
+-	{0, 0x099e, 0x3CBD},
+-	{0, 0x098A, 0x12E0},
+-	{0, 0x0990, 0x776D},
+-	{0, 0x0992, 0xCC32},
+-	{0, 0x0994, 0x5C30},
+-	{0, 0x0996, 0xED00},
+-	{0, 0x0998, 0xFC13},
+-	{0, 0x099a, 0x8683},
+-	{0, 0x099c, 0x1},
+-	{0, 0x099e, 0xBD70},
+-	{0, 0x098A, 0x12F0},
+-	{0, 0x0990, 0x21CC},
+-	{0, 0x0992, 0x325E},
+-	{0, 0x0994, 0x30ED},
+-	{0, 0x0996, 0xFC},
+-	{0, 0x0998, 0x1388},
+-	{0, 0x099a, 0x8300},
+-	{0, 0x099c, 0x1BD},
+-	{0, 0x099e, 0x7021},
+-	{0, 0x098A, 0x1300},
+-	{0, 0x0990, 0x3839},
+-	{0, 0x098E, 0x0010},
+-	{0, 0x0990, 0x1000},
+-	{0, 0x098E, 0x0003},
+-	{100, 0x0990, 0x0004}
+-};
+-
+-mt9t111_regs def_regs1[] = {
+-	{0, 0x001A, 0x0218},
+-	{0, 0x001E, 0x0777},
+-	{0, 0x3084, 0x2409},
+-	{0, 0x3092, 0x0A49},
+-	{0, 0x3094, 0x4949},
+-	{0, 0x3096, 0x4950},
+-	{0, 0x0018, 0x402D},
+-	{100, 0x0018, 0x402C},
+-	{0, 0x098E, 0x6800},
+-	{0, 0x0990, 0x0280},
+-	{0, 0x098E, 0x6802},
+-	{0, 0x0990, 0x01E0},
+-	{0, 0x098E, 0xE88E},
+-	{0, 0x0990, 0x0000},
+-	{0, 0x098E, 0x68A0},
+-	{0, 0x0990, 0x082D},
+-	{0, 0x098E, 0x4802},
+-	{0, 0x0990, 0x0000},
+-	{0, 0x098E, 0x4804},
+-	{0, 0x0990, 0x0000},
+-	{0, 0x098E, 0x4806},
+-	{0, 0x0990, 0x060D},
+-	{0, 0x098E, 0x4808},
+-	{0, 0x0990, 0x080D},
+-	{0, 0x098E, 0x480A},
+-	{0, 0x0990, 0x0111},
+-	{0, 0x098E, 0x480C},
+-	{0, 0x0990, 0x046C},
+-	{0, 0x098E, 0x480F},
+-	{0, 0x0990, 0x00CC},
+-	{0, 0x098E, 0x4811},
+-	{0, 0x0990, 0x0381},
+-	{0, 0x098E, 0x4813},
+-	{0, 0x0990, 0x024F},
+-	{0, 0x098E, 0x481D},
+-	{0, 0x0990, 0x05AE},
+-	{0, 0x098E, 0x481F},
+-	{0, 0x0990, 0x05D0},
+-	{0, 0x098E, 0x4825},
+-	{0, 0x0990, 0x07AC},
+-	{0, 0x098E, 0x6C00},
+-	{0, 0x0990, 0x0800},
+-	{0, 0x098E, 0x6C02},
+-	{0, 0x0990, 0x0600},
+-	{0, 0x098E, 0xEC8E},
+-	{0, 0x0990, 0x0000},
+-	{0, 0x098E, 0x6CA0},
+-	{0, 0x0990, 0x082D},
+-	{0, 0x098E, 0x484A},
+-	{0, 0x0990, 0x0000},
+-	{0, 0x098E, 0x484C},
+-	{0, 0x0990, 0x0000},
+-	{0, 0x098E, 0x484E},
+-	{0, 0x0990, 0x060D},
+-	{0, 0x098E, 0x4850},
+-	{0, 0x0990, 0x080D},
+-	{0, 0x098E, 0x4852},
+-	{0, 0x0990, 0x0111},
+-	{0, 0x098E, 0x4854},
+-	{0, 0x0990, 0x146C},
+-	{0, 0x098E, 0x4857},
+-	{0, 0x0990, 0x00CC},
+-	{0, 0x098E, 0x4859},
+-	{0, 0x0990, 0x0381},
+-	{0, 0x098E, 0x485B},
+-	{0, 0x0990, 0x024F},
+-	{0, 0x098E, 0x4865},
+-	{0, 0x0990, 0x05AE},
+-	{0, 0x098E, 0x4867},
+-	{0, 0x0990, 0x05D0},
+-	{0, 0x098E, 0x486D},
+-	{0, 0x0990, 0x07AC},
+-	{0, 0x098E, 0xC8A5},
+-	{0, 0x0990, 0x001D},
+-	{0, 0x098E, 0xC8A6},
+-	{0, 0x0990, 0x0020},
+-	{0, 0x098E, 0xC8A7},
+-	{0, 0x0990, 0x0023},
+-	{0, 0x098E, 0xC8A8},
+-	{0, 0x0990, 0x0026},
+-	{0, 0x098E, 0xC844},
+-	{0, 0x0990, 0x0091},
+-	{0, 0x098E, 0xC92F},
+-	{0, 0x0990, 0x0000},
+-	{0, 0x098E, 0xC845},
+-	{0, 0x0990, 0x0079},
+-	{0, 0x098E, 0xC92D},
+-	{0, 0x0990, 0x0000},
+-	{0, 0x098E, 0xC88C},
+-	{0, 0x0990, 0x0091},
+-	{0, 0x098E, 0xC930},
+-	{0, 0x0990, 0x0000},
+-	{0, 0x098E, 0xC88D},
+-	{0, 0x0990, 0x0079},
+-	{0, 0x098E, 0xC92E},
+-	{0, 0x0990, 0x0000},
+-	{0, 0x098E, 0xA002},
+-	{0, 0x0990, 0x0010},
+-	{0, 0x098E, 0xA009},
+-	{0, 0x0990, 0x0002},
+-	{0, 0x098E, 0xA00A},
+-	{0, 0x0990, 0x0003},
+-	{0, 0x098E, 0xA00C},
+-	{0, 0x0990, 0x000A},
+-	{0, 0x098E, 0x4846},
+-	{0, 0x0990, 0x0014},
+-	{0, 0x098E, 0x68AA},
+-	{0, 0x0990, 0x0278},
+-	{0, 0x098E, 0x488E},
+-	{0, 0x0990, 0x0014},
+-	{0, 0x098E, 0x6CAA},
+-	{0, 0x0990, 0x0218},
+-	{0, 0x098E, 0x8400},
+-	{0, 0x0990, 0x0006},
+-	{0, 0x098E, 0x8400},
+-	{0, 0x0990, 0x0005},
+-	{0, 0x3C20, 0x0001},
+-	{0, 0x364A, 0x7D2F},
+-	{0, 0x364C, 0x79EB},
+-	{0, 0x364E, 0x18D2},
+-	{0, 0x3650, 0x9F8F},
+-	{0, 0x3652, 0xA7D2},
+-	{0, 0x368A, 0x460C},
+-	{0, 0x368C, 0x14F0},
+-	{0, 0x368E, 0x946F},
+-	{0, 0x3690, 0xC471},
+-	{0, 0x3692, 0x04B1},
+-	{0, 0x36CA, 0x0433},
+-	{0, 0x36CC, 0x680D},
+-	{0, 0x36CE, 0xEEF3},
+-	{0, 0x36D0, 0x4850},
+-	{0, 0x36D2, 0xF233},
+-	{0, 0x370A, 0xB2AF},
+-	{0, 0x370C, 0x2CF0},
+-	{0, 0x370E, 0x3F10},
+-	{0, 0x3710, 0xC673},
+-	{0, 0x3712, 0xA972},
+-	{0, 0x374A, 0x0590},
+-	{0, 0x374C, 0xAFB3},
+-	{0, 0x374E, 0x93D7},
+-	{0, 0x3750, 0x8D12},
+-	{0, 0x3752, 0x2539},
+-	{0, 0x3640, 0x0350},
+-	{0, 0x3642, 0x322C},
+-	{0, 0x3644, 0x77D1},
+-	{0, 0x3646, 0xA26F},
+-	{0, 0x3648, 0xC872},
+-	{0, 0x3680, 0x0C4C},
+-	{0, 0x3682, 0x9510},
+-	{0, 0x3684, 0x110E},
+-	{0, 0x3686, 0x4331},
+-	{0, 0x3688, 0xC1CF},
+-	{0, 0x36C0, 0x6152},
+-	{0, 0x36C2, 0x038E},
+-	{0, 0x36C4, 0x9AF4},
+-	{0, 0x36C6, 0xE12F},
+-	{0, 0x36C8, 0x09F3},
+-	{0, 0x3700, 0xC5AF},
+-	{0, 0x3702, 0xCA90},
+-	{0, 0x3704, 0x5D0F},
+-	{0, 0x3706, 0x3293},
+-	{0, 0x3708, 0x2B92},
+-	{0, 0x3740, 0xC590},
+-	{0, 0x3742, 0x8133},
+-	{0, 0x3744, 0xE0F6},
+-	{0, 0x3746, 0x0254},
+-	{0, 0x3748, 0x10B9},
+-	{0, 0x3654, 0x7F8F},
+-	{0, 0x3656, 0x6F6C},
+-	{0, 0x3658, 0x5971},
+-	{0, 0x365A, 0x9A0F},
+-	{0, 0x365C, 0xA1B2},
+-	{0, 0x3694, 0xB00C},
+-	{0, 0x3696, 0xEBCF},
+-	{0, 0x3698, 0x06AD},
+-	{0, 0x369A, 0x4D31},
+-	{0, 0x369C, 0x2A4E},
+-	{0, 0x36D4, 0x4752},
+-	{0, 0x36D6, 0x724D},
+-	{0, 0x36D8, 0xAD34},
+-	{0, 0x36DA, 0x1350},
+-	{0, 0x36DC, 0x4E94},
+-	{0, 0x3714, 0xA06E},
+-	{0, 0x3716, 0x9152},
+-	{0, 0x3718, 0x1F53},
+-	{0, 0x371A, 0x3933},
+-	{0, 0x371C, 0xBA94},
+-	{0, 0x3754, 0x1233},
+-	{0, 0x3756, 0xA032},
+-	{0, 0x3758, 0xE936},
+-	{0, 0x375A, 0xBE34},
+-	{0, 0x375C, 0x02D9},
+-	{0, 0x365E, 0x7DEF},
+-	{0, 0x3660, 0x434B},
+-	{0, 0x3662, 0x69F1},
+-	{0, 0x3664, 0x8A0F},
+-	{0, 0x3666, 0xBDB2},
+-	{0, 0x369E, 0x290D},
+-	{0, 0x36A0, 0x42CF},
+-	{0, 0x36A2, 0xDC6D},
+-	{0, 0x36A4, 0x91B1},
+-	{0, 0x36A6, 0x9DE9},
+-	{0, 0x36DE, 0x70B2},
+-	{0, 0x36E0, 0x02AC},
+-	{0, 0x36E2, 0x9714},
+-	{0, 0x36E4, 0xF3CF},
+-	{0, 0x36E6, 0x6BD1},
+-	{0, 0x371E, 0xE42E},
+-	{0, 0x3720, 0x1D32},
+-	{0, 0x3722, 0xCC31},
+-	{0, 0x3724, 0xAE94},
+-	{0, 0x3726, 0x6413},
+-	{0, 0x375E, 0xE290},
+-	{0, 0x3760, 0x8F53},
+-	{0, 0x3762, 0xF936},
+-	{0, 0x3764, 0x4614},
+-	{0, 0x3766, 0x1B59},
+-	{0, 0x3784, 0x0404},
+-	{0, 0x3782, 0x0304},
+-	{0, 0x3210, 0x01B8},
+-	{0, 0x098E, 0xC913},
+-	{0, 0x0990, 0x000A},
+-	{0, 0x098E, 0x686B},
+-	{0, 0x0990, 0x05DC},
+-	{0, 0x098E, 0x686D},
+-	{0, 0x0990, 0x0BB8},
+-	{0, 0x098E, 0x6C6B},
+-	{0, 0x0990, 0x05DC},
+-	{0, 0x098E, 0x6C6D},
+-	{0, 0x0990, 0x0BB8},
+-	{0, 0x098E, 0x3439},
+-	{0, 0x0990, 0x05DC},
+-	{0, 0x098E, 0x343B},
+-	{0, 0x0990, 0x0BB8},
+-	{0, 0x098E, 0x4926},
+-	{0, 0x0990, 0x0001},
+-	{0, 0x098E, 0x4928},
+-	{0, 0x0990, 0x0002},
+-	{0, 0x098E, 0x492A},
+-	{0, 0x0990, 0x0656},
+-	{0, 0x098E, 0x4D26},
+-	{0, 0x0990, 0x0001},
+-	{0, 0x098E, 0x4D28},
+-	{0, 0x0990, 0x0002},
+-	{0, 0x098E, 0x4D2A},
+-	{0, 0x0990, 0x0656},
+-	{0, 0x33F4, 0x040B},
+-	{0, 0x098E, 0xC916},
+-	{0, 0x0990, 0x0014},
+-	{0, 0x098E, 0xC919},
+-	{0, 0x0990, 0x0028},
+-	{0, 0x098E, 0xC917},
+-	{0, 0x0990, 0x0004},
+-	{0, 0x098E, 0xC918},
+-	{0, 0x0990, 0x0000},
+-	{0, 0x098E, 0xC91A},
+-	{0, 0x0990, 0x0001},
+-	{0, 0x098E, 0xC91B},
+-	{0, 0x0990, 0x0009},
+-	{0, 0x326C, 0x0C00},
+-	{0, 0x098E, 0x494B},
+-	{0, 0x0990, 0x0042},
+-	{0, 0x098E, 0x494D},
+-	{0, 0x0990, 0x012C},
+-	{0, 0x098E, 0xC91E},
+-	{0, 0x0990, 0x0012},
+-	{0, 0x098E, 0xC91F},
+-	{0, 0x0990, 0x000A},
+-	{0, 0x098E, 0xC920},
+-	{0, 0x0990, 0x0012},
+-	{0, 0x098E, 0xC921},
+-	{0, 0x0990, 0x000A},
+-	{0, 0x098E, 0xC922},
+-	{0, 0x0990, 0x0026},
+-	{0, 0x098E, 0xC923},
+-	{0, 0x0990, 0x001E},
+-	{0, 0x098E, 0xC924},
+-	{0, 0x0990, 0x0026},
+-	{0, 0x098E, 0xC925},
+-	{0, 0x0990, 0x0026},
+-	{0, 0x098E, 0xBC02},
+-	{0, 0x0990, 0x0003},
+-	{0, 0x098E, 0xBC05},
+-	{0, 0x0990, 0x000E},
+-	{0, 0x098E, 0xC950},
+-	{0, 0x0990, 0x0064},
+-	{0, 0x098E, 0xC94F},
+-	{0, 0x0990, 0x0038},
+-	{0, 0x098E, 0xC952},
+-	{0, 0x0990, 0x0064},
+-	{0, 0x098E, 0xC951},
+-	{0, 0x0990, 0x0051},
+-	{0, 0x098E, 0xC954},
+-	{0, 0x0990, 0x0010},
+-	{0, 0x098E, 0xC953},
+-	{0, 0x0990, 0x0020},
+-	{0, 0x098E, 0xC956},
+-	{0, 0x0990, 0x0010},
+-	{0, 0x098E, 0xC955},
+-	{0, 0x0990, 0x0020},
+-	{0, 0x098E, 0xC958},
+-	{0, 0x0990, 0x0020},
+-	{0, 0x098E, 0xC957},
+-	{0, 0x0990, 0x0014},
+-	{0, 0x098E, 0xC95A},
+-	{0, 0x0990, 0x001D},
+-	{0, 0x098E, 0xC959},
+-	{0, 0x0990, 0x0020},
+-	{0, 0x098E, 0xC95C},
+-	{0, 0x0990, 0x000C},
+-	{0, 0x098E, 0xC95B},
+-	{0, 0x0990, 0x0008},
+-	{0, 0x098E, 0xC95E},
+-	{0, 0x0990, 0x000C},
+-	{0, 0x098E, 0xC95D},
+-	{0, 0x0990, 0x0008},
+-	{0, 0x098E, 0xC95F},
+-	{0, 0x0990, 0x0064},
+-	{0, 0x098E, 0x48DC},
+-	{0, 0x0990, 0x004D},
+-	{0, 0x098E, 0x48DE},
+-	{0, 0x0990, 0x0096},
+-	{0, 0x098E, 0x48E0},
+-	{0, 0x0990, 0x001D},
+-	{0, 0x098E, 0x48E2},
+-	{0, 0x0990, 0x004D},
+-	{0, 0x098E, 0x48E4},
+-	{0, 0x0990, 0x0096},
+-	{0, 0x098E, 0x48E6},
+-	{0, 0x0990, 0x001D},
+-	{0, 0x098E, 0x48E8},
+-	{0, 0x0990, 0x004D},
+-	{0, 0x098E, 0x48EA},
+-	{0, 0x0990, 0x0096},
+-	{0, 0x098E, 0x48EC},
+-	{0, 0x0990, 0x001D},
+-	{0, 0x098E, 0xDC2A},
+-	{0, 0x0990, 0x000B},
+-	{0, 0x098E, 0xDC2B},
+-	{0, 0x0990, 0x0017},
+-	{0, 0x098E, 0xBC0B},
+-	{0, 0x0990, 0x0000},
+-	{0, 0x098E, 0xBC0C},
+-	{0, 0x0990, 0x001B},
+-	{0, 0x098E, 0xBC0D},
+-	{0, 0x0990, 0x002A},
+-	{0, 0x098E, 0xBC0E},
+-	{0, 0x0990, 0x003E},
+-	{0, 0x098E, 0xBC0F},
+-	{0, 0x0990, 0x005A},
+-	{0, 0x098E, 0xBC10},
+-	{0, 0x0990, 0x0070},
+-	{0, 0x098E, 0xBC11},
+-	{0, 0x0990, 0x0081},
+-	{0, 0x098E, 0xBC12},
+-	{0, 0x0990, 0x0090},
+-	{0, 0x098E, 0xBC13},
+-	{0, 0x0990, 0x009E},
+-	{0, 0x098E, 0xBC14},
+-	{0, 0x0990, 0x00AB},
+-	{0, 0x098E, 0xBC15},
+-	{0, 0x0990, 0x00B6},
+-	{0, 0x098E, 0xBC16},
+-	{0, 0x0990, 0x00C1},
+-	{0, 0x098E, 0xBC17},
+-	{0, 0x0990, 0x00CB},
+-	{0, 0x098E, 0xBC18},
+-	{0, 0x0990, 0x00D5},
+-	{0, 0x098E, 0xBC19},
+-	{0, 0x0990, 0x00DE},
+-	{0, 0x098E, 0xBC1A},
+-	{0, 0x0990, 0x00E7},
+-	{0, 0x098E, 0xBC1B},
+-	{0, 0x0990, 0x00EF},
+-	{0, 0x098E, 0xBC1C},
+-	{0, 0x0990, 0x00F7},
+-	{0, 0x098E, 0xBC1D},
+-	{0, 0x0990, 0x00FF},
+-	{0, 0x098E, 0xBC1E},
+-	{0, 0x0990, 0x0000},
+-	{0, 0x098E, 0xBC1F},
+-	{0, 0x0990, 0x001B},
+-	{0, 0x098E, 0xBC20},
+-	{0, 0x0990, 0x002A},
+-	{0, 0x098E, 0xBC21},
+-	{0, 0x0990, 0x003E},
+-	{0, 0x098E, 0xBC22},
+-	{0, 0x0990, 0x005A},
+-	{0, 0x098E, 0xBC23},
+-	{0, 0x0990, 0x0070},
+-	{0, 0x098E, 0xBC24},
+-	{0, 0x0990, 0x0081},
+-	{0, 0x098E, 0xBC25},
+-	{0, 0x0990, 0x0090},
+-	{0, 0x098E, 0xBC26},
+-	{0, 0x0990, 0x009E},
+-	{0, 0x098E, 0xBC27},
+-	{0, 0x0990, 0x00AB},
+-	{0, 0x098E, 0xBC28},
+-	{0, 0x0990, 0x00B6},
+-	{0, 0x098E, 0xBC29},
+-	{0, 0x0990, 0x00C1},
+-	{0, 0x098E, 0xBC2A},
+-	{0, 0x0990, 0x00CB},
+-	{0, 0x098E, 0xBC2B},
+-	{0, 0x0990, 0x00D5},
+-	{0, 0x098E, 0xBC2C},
+-	{0, 0x0990, 0x00DE},
+-	{0, 0x098E, 0xBC2D},
+-	{0, 0x0990, 0x00E7},
+-	{0, 0x098E, 0xBC2E},
+-	{0, 0x0990, 0x00EF},
+-	{0, 0x098E, 0xBC2F},
+-	{0, 0x0990, 0x00F7},
+-	{0, 0x098E, 0xBC30},
+-	{0, 0x0990, 0x00FF},
+-	{0, 0x098E, 0xBC31},
+-	{0, 0x0990, 0x0000},
+-	{0, 0x098E, 0xBC32},
+-	{0, 0x0990, 0x000D},
+-	{0, 0x098E, 0xBC33},
+-	{0, 0x0990, 0x0019},
+-	{0, 0x098E, 0xBC34},
+-	{0, 0x0990, 0x0030},
+-	{0, 0x098E, 0xBC35},
+-	{0, 0x0990, 0x0056},
+-	{0, 0x098E, 0xBC36},
+-	{0, 0x0990, 0x0070},
+-	{0, 0x098E, 0xBC37},
+-	{0, 0x0990, 0x0081},
+-	{0, 0x098E, 0xBC38},
+-	{0, 0x0990, 0x0090},
+-	{0, 0x098E, 0xBC39},
+-	{0, 0x0990, 0x009E},
+-	{0, 0x098E, 0xBC3A},
+-	{0, 0x0990, 0x00AB},
+-	{0, 0x098E, 0xBC3B},
+-	{0, 0x0990, 0x00B6},
+-	{0, 0x098E, 0xBC3C},
+-	{0, 0x0990, 0x00C1},
+-	{0, 0x098E, 0xBC3D},
+-	{0, 0x0990, 0x00CB},
+-	{0, 0x098E, 0xBC3E},
+-	{0, 0x0990, 0x00D5},
+-	{0, 0x098E, 0xBC3F},
+-	{0, 0x0990, 0x00DE},
+-	{0, 0x098E, 0xBC40},
+-	{0, 0x0990, 0x00E7},
+-	{0, 0x098E, 0xBC41},
+-	{0, 0x0990, 0x00EF},
+-	{0, 0x098E, 0xBC42},
+-	{0, 0x0990, 0x00F7},
+-	{0, 0x098E, 0xBC43},
+-	{0, 0x0990, 0x00FF},
+-	{0, 0x098E, 0x6865},
+-	{0, 0x0990, 0x00E0},
+-	{0, 0x098E, 0x6867},
+-	{0, 0x0990, 0x00F4},
+-	{0, 0x098E, 0x8400},
+-	{0, 0x0990, 0x0006},
+-	{0, 0x098E, 0xBC4A},
+-	{0, 0x0990, 0x007F},
+-	{0, 0x098E, 0xBC4B},
+-	{0, 0x0990, 0x007F},
+-	{0, 0x098E, 0xBC4C},
+-	{0, 0x0990, 0x007F},
+-	{0, 0x3542, 0x0010},
+-	{0, 0x3544, 0x0030},
+-	{0, 0x3546, 0x0040},
+-	{0, 0x3548, 0x0080},
+-	{0, 0x354A, 0x0100},
+-	{0, 0x354C, 0x0200},
+-	{0, 0x354E, 0x0300},
+-	{0, 0x3550, 0x0010},
+-	{0, 0x3552, 0x0030},
+-	{0, 0x3554, 0x0040},
+-	{0, 0x3556, 0x0080},
+-	{0, 0x3558, 0x012C},
+-	{0, 0x355A, 0x0320},
+-	{0, 0x355C, 0x03E8},
+-	{0, 0x3560, 0x0040},
+-	{0, 0x3562, 0x0020},
+-	{0, 0x3564, 0x0040},
+-	{0, 0x3566, 0x0010},
+-	{0, 0x3568, 0x0008},
+-	{0, 0x356A, 0x0004},
+-	{0, 0x356C, 0x0004},
+-	{0, 0x356E, 0x0004},
+-	{0, 0x098E, 0x3C4D},
+-	{0, 0x0990, 0x0DAC},
+-	{0, 0x098E, 0x3C4F},
+-	{0, 0x0990, 0x148A},
+-	{0, 0x098E, 0xC911},
+-	{0, 0x0990, 0x00C8},
+-	{0, 0x098E, 0xC8F4},
+-	{0, 0x0990, 0x0004},
+-	{0, 0x098E, 0xC8F5},
+-	{0, 0x0990, 0x0002},
+-	{0, 0x098E, 0x48F6},
+-	{0, 0x0990, 0x3B4D},
+-	{0, 0x098E, 0x48F8},
+-	{0, 0x0990, 0x6380},
+-	{0, 0x098E, 0x48FA},
+-	{0, 0x0990, 0x9B18},
+-	{0, 0x098E, 0x48FC},
+-	{0, 0x0990, 0x5D51},
+-	{0, 0x098E, 0x48FE},
+-	{0, 0x0990, 0xEDE8},
+-	{0, 0x098E, 0x4900},
+-	{0, 0x0990, 0xE515},
+-	{0, 0x098E, 0x4902},
+-	{0, 0x0990, 0xBFF4},
+-	{0, 0x098E, 0x4904},
+-	{0, 0x0990, 0x001E},
+-	{0, 0x098E, 0x4906},
+-	{0, 0x0990, 0x0026},
+-	{0, 0x098E, 0x4908},
+-	{0, 0x0990, 0x0033},
+-	{0, 0x098E, 0xE84A},
+-	{0, 0x0990, 0x0083},
+-	{0, 0x098E, 0xE84D},
+-	{0, 0x0990, 0x0083},
+-	{0, 0x098E, 0xE84C},
+-	{0, 0x0990, 0x0080},
+-	{0, 0x098E, 0xE84F},
+-	{0, 0x0990, 0x0080},
+-	{0, 0x098E, 0x8400},
+-	{0, 0x0990, 0x0006},
+-	{0, 0x098E, 0x48B0},
+-	{0, 0x0990, 0x0180},
+-	{0, 0x098E, 0x48B2},
+-	{0, 0x0990, 0xFF7A},
+-	{0, 0x098E, 0x48B4},
+-	{0, 0x0990, 0x0018},
+-	{0, 0x098E, 0x48B6},
+-	{0, 0x0990, 0xFFCA},
+-	{0, 0x098E, 0x48B8},
+-	{0, 0x0990, 0x017C},
+-	{0, 0x098E, 0x48BA},
+-	{0, 0x0990, 0xFFCC},
+-	{0, 0x098E, 0x48BC},
+-	{0, 0x0990, 0x000C},
+-	{0, 0x098E, 0x48BE},
+-	{0, 0x0990, 0xFF1F},
+-	{0, 0x098E, 0x48C0},
+-	{0, 0x0990, 0x01E8},
+-	{0, 0x098E, 0x48C2},
+-	{0, 0x0990, 0x0020},
+-	{0, 0x098E, 0x48C4},
+-	{0, 0x0990, 0x0044},
+-	{0, 0x098E, 0x48C6},
+-	{0, 0x0990, 0x0079},
+-	{0, 0x098E, 0x48C8},
+-	{0, 0x0990, 0xFFAD},
+-	{0, 0x098E, 0x48CA},
+-	{0, 0x0990, 0xFFE2},
+-	{0, 0x098E, 0x48CC},
+-	{0, 0x0990, 0x0033},
+-	{0, 0x098E, 0x48CE},
+-	{0, 0x0990, 0x002A},
+-	{0, 0x098E, 0x48D0},
+-	{0, 0x0990, 0xFFAA},
+-	{0, 0x098E, 0x48D2},
+-	{0, 0x0990, 0x0017},
+-	{0, 0x098E, 0x48D4},
+-	{0, 0x0990, 0x004B},
+-	{0, 0x098E, 0x48D6},
+-	{0, 0x0990, 0xFFA5},
+-	{0, 0x098E, 0x48D8},
+-	{0, 0x0990, 0x0015},
+-	{0, 0x098E, 0x48DA},
+-	{0, 0x0990, 0xFFE2},
+-	{0, 0x35A2, 0x0014},
+-	{0, 0x098E, 0xC949},
+-	{0, 0x0990, 0x0024},
+-	{0, 0x35A4, 0x0596},
+-	{0, 0x098E, 0xC94A},
+-	{0, 0x0990, 0x0062},
+-	{0, 0x098E, 0xC948},
+-	{0, 0x0990, 0x0006},
+-	{0, 0x098E, 0xC914},
+-	{0, 0x0990, 0x0000},
+-	{0, 0x098E, 0xC915},
+-	{0, 0x0990, 0x00FF},
+-	{0, 0x098E, 0xE86F},
+-	{0, 0x0990, 0x0060},
+-	{0, 0x098E, 0xE870},
+-	{0, 0x0990, 0x003C},
+-	{0, 0x098E, 0xEC6F},
+-	{0, 0x0990, 0x0060},
+-	{0, 0x098E, 0xEC70},
+-	{0, 0x0990, 0x003C},
+-	{0, 0x098E, 0xE883},
+-	{0, 0x0990, 0x0000},
+-	{0, 0x098E, 0xEC83},
+-	{0, 0x0990, 0x0000},
+-	{0, 0x098E, 0x8400},
+-	{0, 0x0990, 0x0006},
+-	{0, 0x098E, 0xE885},
+-	{0, 0x0990, 0x001E},
+-	{0, 0x098E, 0xE886},
+-	{0, 0x0990, 0x00D8},
+-	{0, 0x098E, 0xEC85},
+-	{0, 0x0990, 0x001E},
+-	{0, 0x098E, 0xEC86},
+-	{0, 0x0990, 0x00D8},
+-	{0, 0x098E, 0xE884},
+-	{0, 0x0990, 0x005C},
+-	{0, 0x098E, 0xEC84},
+-	{0, 0x0990, 0x005C},
+-	{0, 0x098E, 0x490A},
+-	{0, 0x0990, 0x0666},
+-	{0, 0x098E, 0x490C},
+-	{0, 0x0990, 0x0140},
+-	{0, 0x098E, 0x6857},
+-	{0, 0x0990, 0x0014},
+-	{0, 0x098E, 0x685C},
+-	{0, 0x0990, 0x0005},
+-	{0, 0x098E, 0x490E},
+-	{0, 0x0990, 0x00A4},
+-	{0, 0x098E, 0xB43D},
+-	{0, 0x0990, 0x0031},
+-	{0, 0x098E, 0xB43E},
+-	{0, 0x0990, 0x001B},
+-	{0, 0x098E, 0xB43F},
+-	{0, 0x0990, 0x0028},
+-	{0, 0x098E, 0xB440},
+-	{0, 0x0990, 0x0003},
+-	{0, 0x098E, 0xB441},
+-	{0, 0x0990, 0x00CD},
+-	{0, 0x098E, 0xB442},
+-	{0, 0x0990, 0x0064},
+-	{0, 0x098E, 0xB443},
+-	{0, 0x0990, 0x000F},
+-	{0, 0x098E, 0xB444},
+-	{0, 0x0990, 0x0007},
+-	{0, 0x098E, 0x300D},
+-	{0, 0x0990, 0x000F},
+-	{0, 0x098E, 0x3017},
+-	{0, 0x0990, 0x0F0F},
+-	{0, 0x098E, 0x8400},
+-	{0, 0x0990, 0x0006},
+-	{0, 0x098E, 0xE81F},
+-	{0, 0x0990, 0x0020},
+-	{0, 0x098E, 0x68A0},
+-	{0, 0x0990, 0x082E},
+-	{0, 0x098E, 0x6CA0},
+-	{0, 0x0990, 0x082E},
+-	{0, 0x098E, 0x70A0},
+-	{0, 0x0990, 0x082E},
+-	{0, 0x098E, 0x74A0},
+-	{0, 0x0990, 0x082E},
+-	{0, 0x3C52, 0x082E},
+-	{0, 0x098E, 0x488E},
+-	{0, 0x0990, 0x0020},
+-	{0, 0x098E, 0xECAC},
+-	{0, 0x0990, 0x0000}
+-};
+-
+-mt9t111_regs def_regs2[] = {
+-	{100, 0x0018, 0x0028},
+-	{0, 0x316C, 0x350F},
+-	{0, 0x098E, 0x6817},
+-	{0, 0x0990, 0x000C},
+-	{0, 0x0034, 0x0000}
+-};
+-
+-mt9t111_regs pll_regs1[] = {
+-	{0, 0x0014, 0x2425},
+-	{0, 0x0014, 0x2425},
+-	{0, 0x0014, 0x2145},
+-	{0, 0x0010, 0x0219},
+-	{0, 0x0012, 0x0090},
+-	{0, 0x002A, 0x79DD},
+-	{0, 0x0014, 0x2545},
+-	{0, 0x0014, 0x2547},
+-	{0, 0x0014, 0x3447},
+-	{0, 0x0014, 0x3047}
+-};
+-
+-mt9t111_regs pll_regs2[] = {
+-	{0, 0x0014, 0x3046},
+-	{0, 0x0022, 0x01E0},
+-	{0, 0x001E, 0x0707},
+-	{0, 0x3B84, 0x011D}
+-};
+-
+-mt9t111_regs bayer_pattern_regs[] = {
+-	{0, 0x098E, 0x6807},
+-	{0, 0x0990, 0x0100},
+-	{0, 0x098E, 0x6809},
+-	{0, 0x0990, 0x0000},
+-	{0, 0x098E, 0xE88E},
+-	{0, 0x0990, 0x0000},
+-	{0, 0x098E, 0x6C07},
+-	{0, 0x0990, 0x0100},
+-	{0, 0x098E, 0x6C09},
+-	{0, 0x0990, 0x0000},
+-	{0, 0x098E, 0xEC8E},
+-	{0, 0x0990, 0x0000}
+-};
+-
+-#endif
+diff --git a/include/media/mt9t111.h b/include/media/mt9t111.h
+deleted file mode 100644
+index cd34885..0000000
+--- a/include/media/mt9t111.h
++++ /dev/null
+@@ -1,79 +0,0 @@
+-/*
+- * include/media/mt9t111.h
+- *
+- * mt9t111 sensor driver
+- *
+- * Copyright (C) 2009 Leopard Imaging
+- *
+- * This file is licensed under the terms of the GNU General Public License
+- * version 2. This program is licensed "as is" without any warranty of any
+- * kind, whether express or implied.
+- */
+-
+-#ifndef	MT9T111_H
+-#define	MT9T111_H
+-
+-/*********************************
+- * Defines and Macros and globals
+- ********************************/
+-
+-#ifdef	TRUE
+-#undef	TRUE
+-#endif
+-
+-#ifdef	FALSE
+-#undef	FALSE
+-#endif
+-
+-#define	TRUE 	1
+-#define	FALSE	0
+-
+-#ifdef DEBUG
+-#undef DEBUG
+-#endif
+-
+-#ifndef TYPES
+-#define TYPES
+-#endif
+-
+-#define MT9T111_I2C_REGISTERED			(1)
+-#define MT9T111_I2C_UNREGISTERED		(0)
+-
+-/*i2c adress for MT9T111*/
+-#define MT9T111_I2C_ADDR  		(0x78 >> 1)
+-
+-#define MT9T111_CLK_MAX 	(54000000) /* 54MHz */
+-#define MT9T111_CLK_MIN	(6000000)  /* 6Mhz */
+-
+-#define MT9T111_I2C_CONFIG		(1)
+-#define I2C_ONE_BYTE_TRANSFER		(1)
+-#define I2C_TWO_BYTE_TRANSFER		(2)
+-#define I2C_THREE_BYTE_TRANSFER		(3)
+-#define I2C_FOUR_BYTE_TRANSFER		(4)
+-#define I2C_TXRX_DATA_MASK		(0x00FF)
+-#define I2C_TXRX_DATA_MASK_UPPER	(0xFF00)
+-#define I2C_TXRX_DATA_SHIFT		(8)
+-
+-struct mt9t111_platform_data {
+-	char *master;
+-	int (*power_set) (struct v4l2_int_device *s, enum v4l2_power on);
+-	int (*ifparm) (struct v4l2_ifparm *p);
+-	int (*priv_data_set) (void *);
+-	/* Interface control params */
+-	bool clk_polarity;
+-	bool hs_polarity;
+-	bool vs_polarity;
+-};
+-
+-/**
+- * struct capture_size - image capture size information
+- * @width: image width in pixels
+- * @height: image height in pixels
+- */
+-struct capture_size {
+-	unsigned long width;
+-	unsigned long height;
+-};
+-
+-#endif				/*for  ifndef MT9T111 */
+-
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0049-V4L-DVB-13670-soc-camera-Add-mt9t112-camera-driver.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0049-V4L-DVB-13670-soc-camera-Add-mt9t112-camera-driver.patch
new file mode 100644
index 0000000..5f34fa1
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0049-V4L-DVB-13670-soc-camera-Add-mt9t112-camera-driver.patch
@@ -0,0 +1,1285 @@
+From fab15f2df5c6ee2dc9fc5256d5c4330e6447dd3b Mon Sep 17 00:00:00 2001
+From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
+Date: Fri, 11 Dec 2009 11:53:55 -0300
+Subject: [PATCH 49/75] V4L/DVB (13670): soc-camera: Add mt9t112 camera driver
+
+create mode 100644 drivers/media/video/mt9t112.c
+ create mode 100644 include/media/mt9t112.h
+
+Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
+Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
+---
+ drivers/media/video/Kconfig     |    6 +
+ drivers/media/video/Makefile    |    1 +
+ drivers/media/video/mt9t112.c   | 1177 +++++++++++++++++++++++++++++++++++++++
+ include/media/mt9t112.h         |   30 +
+ include/media/v4l2-chip-ident.h |    2 +
+ 5 files changed, 1216 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/media/video/mt9t112.c
+ create mode 100644 include/media/mt9t112.h
+
+diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
+index 780b246..7caade9 100644
+--- a/drivers/media/video/Kconfig
++++ b/drivers/media/video/Kconfig
+@@ -832,6 +832,12 @@ config SOC_CAMERA_MT9T031
+ 	help
+ 	  This driver supports MT9T031 cameras from Micron.
+ 
++config SOC_CAMERA_MT9T112
++	tristate "mt9t112 support"
++	depends on SOC_CAMERA && I2C
++	help
++	  This driver supports MT9T112 cameras from Aptina.
++
+ config SOC_CAMERA_MT9V022
+ 	tristate "mt9v022 support"
+ 	depends on SOC_CAMERA && I2C
+diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
+index 3828723..61ae13f 100644
+--- a/drivers/media/video/Makefile
++++ b/drivers/media/video/Makefile
+@@ -80,6 +80,7 @@ obj-$(CONFIG_VIDEO_MT9V113) += mt9v113.o
+ obj-$(CONFIG_SOC_CAMERA_MT9M001)	+= mt9m001.o
+ obj-$(CONFIG_SOC_CAMERA_MT9M111)	+= mt9m111.o
+ obj-$(CONFIG_SOC_CAMERA_MT9T031)	+= mt9t031.o
++obj-$(CONFIG_SOC_CAMERA_MT9T112)	+= mt9t112.o
+ obj-$(CONFIG_SOC_CAMERA_MT9V022)	+= mt9v022.o
+ obj-$(CONFIG_SOC_CAMERA_OV772X)		+= ov772x.o
+ obj-$(CONFIG_SOC_CAMERA_OV9640)		+= ov9640.o
+diff --git a/drivers/media/video/mt9t112.c b/drivers/media/video/mt9t112.c
+new file mode 100644
+index 0000000..fc4dd60
+--- /dev/null
++++ b/drivers/media/video/mt9t112.c
+@@ -0,0 +1,1177 @@
++/*
++ * mt9t112 Camera Driver
++ *
++ * Copyright (C) 2009 Renesas Solutions Corp.
++ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
++ *
++ * Based on ov772x driver, mt9m111 driver,
++ *
++ * Copyright (C) 2008 Kuninori Morimoto <morimoto.kuninori@renesas.com>
++ * Copyright (C) 2008, Robert Jarzmik <robert.jarzmik@free.fr>
++ * Copyright 2006-7 Jonathan Corbet <corbet@lwn.net>
++ * Copyright (C) 2008 Magnus Damm
++ * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/delay.h>
++#include <linux/i2c.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/slab.h>
++#include <linux/videodev2.h>
++
++#include <media/mt9t112.h>
++#include <media/soc_camera.h>
++#include <media/soc_mediabus.h>
++#include <media/v4l2-chip-ident.h>
++#include <media/v4l2-common.h>
++
++/* you can check PLL/clock info */
++/* #define EXT_CLOCK 24000000 */
++
++/************************************************************************
++
++
++			macro
++
++
++************************************************************************/
++/*
++ * frame size
++ */
++#define MAX_WIDTH   2048
++#define MAX_HEIGHT  1536
++
++#define VGA_WIDTH   640
++#define VGA_HEIGHT  480
++
++/*
++ * macro of read/write
++ */
++#define ECHECKER(ret, x)		\
++	do {				\
++		(ret) = (x);		\
++		if ((ret) < 0)		\
++			return (ret);	\
++	} while (0)
++
++#define mt9t112_reg_write(ret, client, a, b) \
++	ECHECKER(ret, __mt9t112_reg_write(client, a, b))
++#define mt9t112_mcu_write(ret, client, a, b) \
++	ECHECKER(ret, __mt9t112_mcu_write(client, a, b))
++
++#define mt9t112_reg_mask_set(ret, client, a, b, c) \
++	ECHECKER(ret, __mt9t112_reg_mask_set(client, a, b, c))
++#define mt9t112_mcu_mask_set(ret, client, a, b, c) \
++	ECHECKER(ret, __mt9t112_mcu_mask_set(client, a, b, c))
++
++#define mt9t112_reg_read(ret, client, a) \
++	ECHECKER(ret, __mt9t112_reg_read(client, a))
++
++/*
++ * Logical address
++ */
++#define _VAR(id, offset, base)	(base | (id & 0x1f) << 10 | (offset & 0x3ff))
++#define VAR(id, offset)  _VAR(id, offset, 0x0000)
++#define VAR8(id, offset) _VAR(id, offset, 0x8000)
++
++/************************************************************************
++
++
++			struct
++
++
++************************************************************************/
++struct mt9t112_frame_size {
++	u16 width;
++	u16 height;
++};
++
++struct mt9t112_format {
++	enum v4l2_mbus_pixelcode code;
++	enum v4l2_colorspace colorspace;
++	u16 fmt;
++	u16 order;
++};
++
++struct mt9t112_priv {
++	struct v4l2_subdev		 subdev;
++	struct mt9t112_camera_info	*info;
++	struct i2c_client		*client;
++	struct soc_camera_device	 icd;
++	struct mt9t112_frame_size	 frame;
++	const struct mt9t112_format	*format;
++	int				 model;
++	u32				 flags;
++/* for flags */
++#define INIT_DONE  (1<<0)
++};
++
++/************************************************************************
++
++
++			supported format
++
++
++************************************************************************/
++
++static const struct mt9t112_format mt9t112_cfmts[] = {
++	{
++		.code		= V4L2_MBUS_FMT_YUYV8_2X8_BE,
++		.colorspace	= V4L2_COLORSPACE_JPEG,
++		.fmt		= 1,
++		.order		= 0,
++	}, {
++		.code		= V4L2_MBUS_FMT_YVYU8_2X8_BE,
++		.colorspace	= V4L2_COLORSPACE_JPEG,
++		.fmt		= 1,
++		.order		= 1,
++	}, {
++		.code		= V4L2_MBUS_FMT_YUYV8_2X8_LE,
++		.colorspace	= V4L2_COLORSPACE_JPEG,
++		.fmt		= 1,
++		.order		= 2,
++	}, {
++		.code		= V4L2_MBUS_FMT_YVYU8_2X8_LE,
++		.colorspace	= V4L2_COLORSPACE_JPEG,
++		.fmt		= 1,
++		.order		= 3,
++	}, {
++		.code		= V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE,
++		.colorspace	= V4L2_COLORSPACE_SRGB,
++		.fmt		= 8,
++		.order		= 2,
++	}, {
++		.code		= V4L2_MBUS_FMT_RGB565_2X8_LE,
++		.colorspace	= V4L2_COLORSPACE_SRGB,
++		.fmt		= 4,
++		.order		= 2,
++	},
++};
++
++/************************************************************************
++
++
++			general function
++
++
++************************************************************************/
++static struct mt9t112_priv *to_mt9t112(const struct i2c_client *client)
++{
++	return container_of(i2c_get_clientdata(client),
++			    struct mt9t112_priv,
++			    subdev);
++}
++
++static int __mt9t112_reg_read(const struct i2c_client *client, u16 command)
++{
++	struct i2c_msg msg[2];
++	u8 buf[2];
++	int ret;
++
++	command = swab16(command);
++
++	msg[0].addr  = client->addr;
++	msg[0].flags = 0;
++	msg[0].len   = 2;
++	msg[0].buf   = (u8 *)&command;
++
++	msg[1].addr  = client->addr;
++	msg[1].flags = I2C_M_RD;
++	msg[1].len   = 2;
++	msg[1].buf   = buf;
++
++	/*
++	 * if return value of this function is < 0,
++	 * it mean error.
++	 * else, under 16bit is valid data.
++	 */
++	ret = i2c_transfer(client->adapter, msg, 2);
++	if (ret < 0)
++		return ret;
++
++	memcpy(&ret, buf, 2);
++	return swab16(ret);
++}
++
++static int __mt9t112_reg_write(const struct i2c_client *client,
++			       u16 command, u16 data)
++{
++	struct i2c_msg msg;
++	u8 buf[4];
++	int ret;
++
++	command = swab16(command);
++	data = swab16(data);
++
++	memcpy(buf + 0, &command, 2);
++	memcpy(buf + 2, &data,    2);
++
++	msg.addr  = client->addr;
++	msg.flags = 0;
++	msg.len   = 4;
++	msg.buf   = buf;
++
++	/*
++	 * i2c_transfer return message length,
++	 * but this function should return 0 if correct case
++	 */
++	ret = i2c_transfer(client->adapter, &msg, 1);
++	if (ret >= 0)
++		ret = 0;
++
++	return ret;
++}
++
++static int __mt9t112_reg_mask_set(const struct i2c_client *client,
++				  u16  command,
++				  u16  mask,
++				  u16  set)
++{
++	int val = __mt9t112_reg_read(client, command);
++	if (val < 0)
++		return val;
++
++	val &= ~mask;
++	val |= set & mask;
++
++	return __mt9t112_reg_write(client, command, val);
++}
++
++/* mcu access */
++static int __mt9t112_mcu_read(const struct i2c_client *client, u16 command)
++{
++	int ret;
++
++	ret = __mt9t112_reg_write(client, 0x098E, command);
++	if (ret < 0)
++		return ret;
++
++	return __mt9t112_reg_read(client, 0x0990);
++}
++
++static int __mt9t112_mcu_write(const struct i2c_client *client,
++			       u16 command, u16 data)
++{
++	int ret;
++
++	ret = __mt9t112_reg_write(client, 0x098E, command);
++	if (ret < 0)
++		return ret;
++
++	return __mt9t112_reg_write(client, 0x0990, data);
++}
++
++static int __mt9t112_mcu_mask_set(const struct i2c_client *client,
++				  u16  command,
++				  u16  mask,
++				  u16  set)
++{
++	int val = __mt9t112_mcu_read(client, command);
++	if (val < 0)
++		return val;
++
++	val &= ~mask;
++	val |= set & mask;
++
++	return __mt9t112_mcu_write(client, command, val);
++}
++
++static int mt9t112_reset(const struct i2c_client *client)
++{
++	int ret;
++
++	mt9t112_reg_mask_set(ret, client, 0x001a, 0x0001, 0x0001);
++	msleep(1);
++	mt9t112_reg_mask_set(ret, client, 0x001a, 0x0001, 0x0000);
++
++	return ret;
++}
++
++#ifndef EXT_CLOCK
++#define CLOCK_INFO(a, b)
++#else
++#define CLOCK_INFO(a, b) mt9t112_clock_info(a, b)
++static int mt9t112_clock_info(const struct i2c_client *client, u32 ext)
++{
++	int m, n, p1, p2, p3, p4, p5, p6, p7;
++	u32 vco, clk;
++	char *enable;
++
++	ext /= 1000; /* kbyte order */
++
++	mt9t112_reg_read(n, client, 0x0012);
++	p1 = n & 0x000f;
++	n = n >> 4;
++	p2 = n & 0x000f;
++	n = n >> 4;
++	p3 = n & 0x000f;
++
++	mt9t112_reg_read(n, client, 0x002a);
++	p4 = n & 0x000f;
++	n = n >> 4;
++	p5 = n & 0x000f;
++	n = n >> 4;
++	p6 = n & 0x000f;
++
++	mt9t112_reg_read(n, client, 0x002c);
++	p7 = n & 0x000f;
++
++	mt9t112_reg_read(n, client, 0x0010);
++	m = n & 0x00ff;
++	n = (n >> 8) & 0x003f;
++
++	enable = ((6000 > ext) || (54000 < ext)) ? "X" : "";
++	dev_info(&client->dev, "EXTCLK          : %10u K %s\n", ext, enable);
++
++	vco = 2 * m * ext / (n+1);
++	enable = ((384000 > vco) || (768000 < vco)) ? "X" : "";
++	dev_info(&client->dev, "VCO             : %10u K %s\n", vco, enable);
++
++	clk = vco / (p1+1) / (p2+1);
++	enable = (96000 < clk) ? "X" : "";
++	dev_info(&client->dev, "PIXCLK          : %10u K %s\n", clk, enable);
++
++	clk = vco / (p3+1);
++	enable = (768000 < clk) ? "X" : "";
++	dev_info(&client->dev, "MIPICLK         : %10u K %s\n", clk, enable);
++
++	clk = vco / (p6+1);
++	enable = (96000 < clk) ? "X" : "";
++	dev_info(&client->dev, "MCU CLK         : %10u K %s\n", clk, enable);
++
++	clk = vco / (p5+1);
++	enable = (54000 < clk) ? "X" : "";
++	dev_info(&client->dev, "SOC CLK         : %10u K %s\n", clk, enable);
++
++	clk = vco / (p4+1);
++	enable = (70000 < clk) ? "X" : "";
++	dev_info(&client->dev, "Sensor CLK      : %10u K %s\n", clk, enable);
++
++	clk = vco / (p7+1);
++	dev_info(&client->dev, "External sensor : %10u K\n", clk);
++
++	clk = ext / (n+1);
++	enable = ((2000 > clk) || (24000 < clk)) ? "X" : "";
++	dev_info(&client->dev, "PFD             : %10u K %s\n", clk, enable);
++
++	return 0;
++}
++#endif
++
++static void mt9t112_frame_check(u32 *width, u32 *height)
++{
++	if (*width > MAX_WIDTH)
++		*width = MAX_WIDTH;
++
++	if (*height > MAX_HEIGHT)
++		*height = MAX_HEIGHT;
++}
++
++static int mt9t112_set_a_frame_size(const struct i2c_client *client,
++				   u16 width,
++				   u16 height)
++{
++	int ret;
++	u16 wstart = (MAX_WIDTH - width) / 2;
++	u16 hstart = (MAX_HEIGHT - height) / 2;
++
++	/* (Context A) Image Width/Height */
++	mt9t112_mcu_write(ret, client, VAR(26, 0), width);
++	mt9t112_mcu_write(ret, client, VAR(26, 2), height);
++
++	/* (Context A) Output Width/Height */
++	mt9t112_mcu_write(ret, client, VAR(18, 43), 8 + width);
++	mt9t112_mcu_write(ret, client, VAR(18, 45), 8 + height);
++
++	/* (Context A) Start Row/Column */
++	mt9t112_mcu_write(ret, client, VAR(18, 2), 4 + hstart);
++	mt9t112_mcu_write(ret, client, VAR(18, 4), 4 + wstart);
++
++	/* (Context A) End Row/Column */
++	mt9t112_mcu_write(ret, client, VAR(18, 6), 11 + height + hstart);
++	mt9t112_mcu_write(ret, client, VAR(18, 8), 11 + width  + wstart);
++
++	mt9t112_mcu_write(ret, client, VAR8(1, 0), 0x06);
++
++	return ret;
++}
++
++static int mt9t112_set_pll_dividers(const struct i2c_client *client,
++				    u8 m, u8 n,
++				    u8 p1, u8 p2, u8 p3,
++				    u8 p4, u8 p5, u8 p6,
++				    u8 p7)
++{
++	int ret;
++	u16 val;
++
++	/* N/M */
++	val = (n << 8) |
++	      (m << 0);
++	mt9t112_reg_mask_set(ret, client, 0x0010, 0x3fff, val);
++
++	/* P1/P2/P3 */
++	val = ((p3 & 0x0F) << 8) |
++	      ((p2 & 0x0F) << 4) |
++	      ((p1 & 0x0F) << 0);
++	mt9t112_reg_mask_set(ret, client, 0x0012, 0x0fff, val);
++
++	/* P4/P5/P6 */
++	val = (0x7         << 12) |
++	      ((p6 & 0x0F) <<  8) |
++	      ((p5 & 0x0F) <<  4) |
++	      ((p4 & 0x0F) <<  0);
++	mt9t112_reg_mask_set(ret, client, 0x002A, 0x7fff, val);
++
++	/* P7 */
++	val = (0x1         << 12) |
++	      ((p7 & 0x0F) <<  0);
++	mt9t112_reg_mask_set(ret, client, 0x002C, 0x100f, val);
++
++	return ret;
++}
++
++static int mt9t112_init_pll(const struct i2c_client *client)
++{
++	struct mt9t112_priv *priv = to_mt9t112(client);
++	int data, i, ret;
++
++	mt9t112_reg_mask_set(ret, client, 0x0014, 0x003, 0x0001);
++
++	/* PLL control: BYPASS PLL = 8517 */
++	mt9t112_reg_write(ret, client, 0x0014, 0x2145);
++
++	/* Replace these registers when new timing parameters are generated */
++	mt9t112_set_pll_dividers(client,
++				 priv->info->divider.m,
++				 priv->info->divider.n,
++				 priv->info->divider.p1,
++				 priv->info->divider.p2,
++				 priv->info->divider.p3,
++				 priv->info->divider.p4,
++				 priv->info->divider.p5,
++				 priv->info->divider.p6,
++				 priv->info->divider.p7);
++
++	/*
++	 * TEST_BYPASS  on
++	 * PLL_ENABLE   on
++	 * SEL_LOCK_DET on
++	 * TEST_BYPASS  off
++	 */
++	mt9t112_reg_write(ret, client, 0x0014, 0x2525);
++	mt9t112_reg_write(ret, client, 0x0014, 0x2527);
++	mt9t112_reg_write(ret, client, 0x0014, 0x3427);
++	mt9t112_reg_write(ret, client, 0x0014, 0x3027);
++
++	mdelay(10);
++
++	/*
++	 * PLL_BYPASS off
++	 * Reference clock count
++	 * I2C Master Clock Divider
++	 */
++	mt9t112_reg_write(ret, client, 0x0014, 0x3046);
++	mt9t112_reg_write(ret, client, 0x0022, 0x0190);
++	mt9t112_reg_write(ret, client, 0x3B84, 0x0212);
++
++	/* External sensor clock is PLL bypass */
++	mt9t112_reg_write(ret, client, 0x002E, 0x0500);
++
++	mt9t112_reg_mask_set(ret, client, 0x0018, 0x0002, 0x0002);
++	mt9t112_reg_mask_set(ret, client, 0x3B82, 0x0004, 0x0004);
++
++	/* MCU disabled */
++	mt9t112_reg_mask_set(ret, client, 0x0018, 0x0004, 0x0004);
++
++	/* out of standby */
++	mt9t112_reg_mask_set(ret, client, 0x0018, 0x0001, 0);
++
++	mdelay(50);
++
++	/*
++	 * Standby Workaround
++	 * Disable Secondary I2C Pads
++	 */
++	mt9t112_reg_write(ret, client, 0x0614, 0x0001);
++	mdelay(1);
++	mt9t112_reg_write(ret, client, 0x0614, 0x0001);
++	mdelay(1);
++	mt9t112_reg_write(ret, client, 0x0614, 0x0001);
++	mdelay(1);
++	mt9t112_reg_write(ret, client, 0x0614, 0x0001);
++	mdelay(1);
++	mt9t112_reg_write(ret, client, 0x0614, 0x0001);
++	mdelay(1);
++	mt9t112_reg_write(ret, client, 0x0614, 0x0001);
++	mdelay(1);
++
++	/* poll to verify out of standby. Must Poll this bit */
++	for (i = 0; i < 100; i++) {
++		mt9t112_reg_read(data, client, 0x0018);
++		if (0x4000 & data)
++			break;
++
++		mdelay(10);
++	}
++
++	return ret;
++}
++
++static int mt9t112_init_setting(const struct i2c_client *client)
++{
++
++	int ret;
++
++	/* Adaptive Output Clock (A) */
++	mt9t112_mcu_mask_set(ret, client, VAR(26, 160), 0x0040, 0x0000);
++
++	/* Read Mode (A) */
++	mt9t112_mcu_write(ret, client, VAR(18, 12), 0x0024);
++
++	/* Fine Correction (A) */
++	mt9t112_mcu_write(ret, client, VAR(18, 15), 0x00CC);
++
++	/* Fine IT Min (A) */
++	mt9t112_mcu_write(ret, client, VAR(18, 17), 0x01f1);
++
++	/* Fine IT Max Margin (A) */
++	mt9t112_mcu_write(ret, client, VAR(18, 19), 0x00fF);
++
++	/* Base Frame Lines (A) */
++	mt9t112_mcu_write(ret, client, VAR(18, 29), 0x032D);
++
++	/* Min Line Length (A) */
++	mt9t112_mcu_write(ret, client, VAR(18, 31), 0x073a);
++
++	/* Line Length (A) */
++	mt9t112_mcu_write(ret, client, VAR(18, 37), 0x07d0);
++
++	/* Adaptive Output Clock (B) */
++	mt9t112_mcu_mask_set(ret, client, VAR(27, 160), 0x0040, 0x0000);
++
++	/* Row Start (B) */
++	mt9t112_mcu_write(ret, client, VAR(18, 74), 0x004);
++
++	/* Column Start (B) */
++	mt9t112_mcu_write(ret, client, VAR(18, 76), 0x004);
++
++	/* Row End (B) */
++	mt9t112_mcu_write(ret, client, VAR(18, 78), 0x60B);
++
++	/* Column End (B) */
++	mt9t112_mcu_write(ret, client, VAR(18, 80), 0x80B);
++
++	/* Fine Correction (B) */
++	mt9t112_mcu_write(ret, client, VAR(18, 87), 0x008C);
++
++	/* Fine IT Min (B) */
++	mt9t112_mcu_write(ret, client, VAR(18, 89), 0x01F1);
++
++	/* Fine IT Max Margin (B) */
++	mt9t112_mcu_write(ret, client, VAR(18, 91), 0x00FF);
++
++	/* Base Frame Lines (B) */
++	mt9t112_mcu_write(ret, client, VAR(18, 101), 0x0668);
++
++	/* Min Line Length (B) */
++	mt9t112_mcu_write(ret, client, VAR(18, 103), 0x0AF0);
++
++	/* Line Length (B) */
++	mt9t112_mcu_write(ret, client, VAR(18, 109), 0x0AF0);
++
++	/*
++	 * Flicker Dectection registers
++	 * This section should be replaced whenever new Timing file is generated
++	 * All the following registers need to be replaced
++	 * Following registers are generated from Register Wizard but user can
++	 * modify them. For detail see auto flicker detection tuning
++	 */
++
++	/* FD_FDPERIOD_SELECT */
++	mt9t112_mcu_write(ret, client, VAR8(8, 5), 0x01);
++
++	/* PRI_B_CONFIG_FD_ALGO_RUN */
++	mt9t112_mcu_write(ret, client, VAR(27, 17), 0x0003);
++
++	/* PRI_A_CONFIG_FD_ALGO_RUN */
++	mt9t112_mcu_write(ret, client, VAR(26, 17), 0x0003);
++
++	/*
++	 * AFD range detection tuning registers
++	 */
++
++	/* search_f1_50 */
++	mt9t112_mcu_write(ret, client, VAR8(18, 165), 0x25);
++
++	/* search_f2_50 */
++	mt9t112_mcu_write(ret, client, VAR8(18, 166), 0x28);
++
++	/* search_f1_60 */
++	mt9t112_mcu_write(ret, client, VAR8(18, 167), 0x2C);
++
++	/* search_f2_60 */
++	mt9t112_mcu_write(ret, client, VAR8(18, 168), 0x2F);
++
++	/* period_50Hz (A) */
++	mt9t112_mcu_write(ret, client, VAR8(18, 68), 0xBA);
++
++	/* secret register by aptina */
++	/* period_50Hz (A MSB) */
++	mt9t112_mcu_write(ret, client, VAR8(18, 303), 0x00);
++
++	/* period_60Hz (A) */
++	mt9t112_mcu_write(ret, client, VAR8(18, 69), 0x9B);
++
++	/* secret register by aptina */
++	/* period_60Hz (A MSB) */
++	mt9t112_mcu_write(ret, client, VAR8(18, 301), 0x00);
++
++	/* period_50Hz (B) */
++	mt9t112_mcu_write(ret, client, VAR8(18, 140), 0x82);
++
++	/* secret register by aptina */
++	/* period_50Hz (B) MSB */
++	mt9t112_mcu_write(ret, client, VAR8(18, 304), 0x00);
++
++	/* period_60Hz (B) */
++	mt9t112_mcu_write(ret, client, VAR8(18, 141), 0x6D);
++
++	/* secret register by aptina */
++	/* period_60Hz (B) MSB */
++	mt9t112_mcu_write(ret, client, VAR8(18, 302), 0x00);
++
++	/* FD Mode */
++	mt9t112_mcu_write(ret, client, VAR8(8, 2), 0x10);
++
++	/* Stat_min */
++	mt9t112_mcu_write(ret, client, VAR8(8, 9), 0x02);
++
++	/* Stat_max */
++	mt9t112_mcu_write(ret, client, VAR8(8, 10), 0x03);
++
++	/* Min_amplitude */
++	mt9t112_mcu_write(ret, client, VAR8(8, 12), 0x0A);
++
++	/* RX FIFO Watermark (A) */
++	mt9t112_mcu_write(ret, client, VAR(18, 70), 0x0014);
++
++	/* RX FIFO Watermark (B) */
++	mt9t112_mcu_write(ret, client, VAR(18, 142), 0x0014);
++
++	/* MCLK: 16MHz
++	 * PCLK: 73MHz
++	 * CorePixCLK: 36.5 MHz
++	 */
++	mt9t112_mcu_write(ret, client, VAR8(18, 0x0044), 133);
++	mt9t112_mcu_write(ret, client, VAR8(18, 0x0045), 110);
++	mt9t112_mcu_write(ret, client, VAR8(18, 0x008c), 130);
++	mt9t112_mcu_write(ret, client, VAR8(18, 0x008d), 108);
++
++	mt9t112_mcu_write(ret, client, VAR8(18, 0x00A5), 27);
++	mt9t112_mcu_write(ret, client, VAR8(18, 0x00a6), 30);
++	mt9t112_mcu_write(ret, client, VAR8(18, 0x00a7), 32);
++	mt9t112_mcu_write(ret, client, VAR8(18, 0x00a8), 35);
++
++	return ret;
++}
++
++static int mt9t112_auto_focus_setting(const struct i2c_client *client)
++{
++	int ret;
++
++	mt9t112_mcu_write(ret, client, VAR(12, 13),	0x000F);
++	mt9t112_mcu_write(ret, client, VAR(12, 23),	0x0F0F);
++	mt9t112_mcu_write(ret, client, VAR8(1, 0),	0x06);
++
++	mt9t112_reg_write(ret, client, 0x0614, 0x0000);
++
++	mt9t112_mcu_write(ret, client, VAR8(1, 0),	0x05);
++	mt9t112_mcu_write(ret, client, VAR8(12, 2),	0x02);
++	mt9t112_mcu_write(ret, client, VAR(12, 3),	0x0002);
++	mt9t112_mcu_write(ret, client, VAR(17, 3),	0x8001);
++	mt9t112_mcu_write(ret, client, VAR(17, 11),	0x0025);
++	mt9t112_mcu_write(ret, client, VAR(17, 13),	0x0193);
++	mt9t112_mcu_write(ret, client, VAR8(17, 33),	0x18);
++	mt9t112_mcu_write(ret, client, VAR8(1, 0),	0x05);
++
++	return ret;
++}
++
++static int mt9t112_auto_focus_trigger(const struct i2c_client *client)
++{
++	int ret;
++
++	mt9t112_mcu_write(ret, client, VAR8(12, 25), 0x01);
++
++	return ret;
++}
++
++static int mt9t112_init_camera(const struct i2c_client *client)
++{
++	int ret;
++
++	ECHECKER(ret, mt9t112_reset(client));
++
++	ECHECKER(ret, mt9t112_init_pll(client));
++
++	ECHECKER(ret, mt9t112_init_setting(client));
++
++	ECHECKER(ret, mt9t112_auto_focus_setting(client));
++
++	mt9t112_reg_mask_set(ret, client, 0x0018, 0x0004, 0);
++
++	/* Analog setting B */
++	mt9t112_reg_write(ret, client, 0x3084, 0x2409);
++	mt9t112_reg_write(ret, client, 0x3092, 0x0A49);
++	mt9t112_reg_write(ret, client, 0x3094, 0x4949);
++	mt9t112_reg_write(ret, client, 0x3096, 0x4950);
++
++	/*
++	 * Disable adaptive clock
++	 * PRI_A_CONFIG_JPEG_OB_TX_CONTROL_VAR
++	 * PRI_B_CONFIG_JPEG_OB_TX_CONTROL_VAR
++	 */
++	mt9t112_mcu_write(ret, client, VAR(26, 160), 0x0A2E);
++	mt9t112_mcu_write(ret, client, VAR(27, 160), 0x0A2E);
++
++	/* Configure STatus in Status_before_length Format and enable header */
++	/* PRI_B_CONFIG_JPEG_OB_TX_CONTROL_VAR */
++	mt9t112_mcu_write(ret, client, VAR(27, 144), 0x0CB4);
++
++	/* Enable JPEG in context B */
++	/* PRI_B_CONFIG_JPEG_OB_TX_CONTROL_VAR */
++	mt9t112_mcu_write(ret, client, VAR8(27, 142), 0x01);
++
++	/* Disable Dac_TXLO */
++	mt9t112_reg_write(ret, client, 0x316C, 0x350F);
++
++	/* Set max slew rates */
++	mt9t112_reg_write(ret, client, 0x1E, 0x777);
++
++	return ret;
++}
++
++/************************************************************************
++
++
++			soc_camera_ops
++
++
++************************************************************************/
++static int mt9t112_set_bus_param(struct soc_camera_device *icd,
++				 unsigned long	flags)
++{
++	return 0;
++}
++
++static unsigned long mt9t112_query_bus_param(struct soc_camera_device *icd)
++{
++	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
++	struct mt9t112_priv *priv = to_mt9t112(client);
++	struct soc_camera_link *icl = to_soc_camera_link(icd);
++	unsigned long flags = SOCAM_MASTER | SOCAM_VSYNC_ACTIVE_HIGH |
++		SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_DATA_ACTIVE_HIGH;
++
++	flags |= (priv->info->flags & MT9T112_FLAG_PCLK_RISING_EDGE) ?
++		SOCAM_PCLK_SAMPLE_RISING : SOCAM_PCLK_SAMPLE_FALLING;
++
++	if (priv->info->flags & MT9T112_FLAG_DATAWIDTH_8)
++		flags |= SOCAM_DATAWIDTH_8;
++	else
++		flags |= SOCAM_DATAWIDTH_10;
++
++	return soc_camera_apply_sensor_flags(icl, flags);
++}
++
++static struct soc_camera_ops mt9t112_ops = {
++	.set_bus_param		= mt9t112_set_bus_param,
++	.query_bus_param	= mt9t112_query_bus_param,
++};
++
++/************************************************************************
++
++
++			v4l2_subdev_core_ops
++
++
++************************************************************************/
++static int mt9t112_g_chip_ident(struct v4l2_subdev *sd,
++				struct v4l2_dbg_chip_ident *id)
++{
++	struct i2c_client *client = sd->priv;
++	struct mt9t112_priv *priv = to_mt9t112(client);
++
++	id->ident    = priv->model;
++	id->revision = 0;
++
++	return 0;
++}
++
++#ifdef CONFIG_VIDEO_ADV_DEBUG
++static int mt9t112_g_register(struct v4l2_subdev *sd,
++			      struct v4l2_dbg_register *reg)
++{
++	struct i2c_client *client = sd->priv;
++	int                ret;
++
++	reg->size = 2;
++	mt9t112_reg_read(ret, client, reg->reg);
++
++	reg->val = (__u64)ret;
++
++	return 0;
++}
++
++static int mt9t112_s_register(struct v4l2_subdev *sd,
++			      struct v4l2_dbg_register *reg)
++{
++	struct i2c_client *client = sd->priv;
++	int ret;
++
++	mt9t112_reg_write(ret, client, reg->reg, reg->val);
++
++	return ret;
++}
++#endif
++
++static struct v4l2_subdev_core_ops mt9t112_subdev_core_ops = {
++	.g_chip_ident	= mt9t112_g_chip_ident,
++#ifdef CONFIG_VIDEO_ADV_DEBUG
++	.g_register	= mt9t112_g_register,
++	.s_register	= mt9t112_s_register,
++#endif
++};
++
++
++/************************************************************************
++
++
++			v4l2_subdev_video_ops
++
++
++************************************************************************/
++static int mt9t112_s_stream(struct v4l2_subdev *sd, int enable)
++{
++	struct i2c_client *client = sd->priv;
++	struct mt9t112_priv *priv = to_mt9t112(client);
++	int ret = 0;
++
++	if (!enable) {
++		/* FIXME
++		 *
++		 * If user selected large output size,
++		 * and used it long time,
++		 * mt9t112 camera will be very warm.
++		 *
++		 * But current driver can not stop mt9t112 camera.
++		 * So, set small size here to solve this problem.
++		 */
++		mt9t112_set_a_frame_size(client, VGA_WIDTH, VGA_HEIGHT);
++		return ret;
++	}
++
++	if (!(priv->flags & INIT_DONE)) {
++		u16 param = (MT9T112_FLAG_PCLK_RISING_EDGE &
++			     priv->info->flags) ? 0x0001 : 0x0000;
++
++		ECHECKER(ret, mt9t112_init_camera(client));
++
++		/* Invert PCLK (Data sampled on falling edge of pixclk) */
++		mt9t112_reg_write(ret, client, 0x3C20, param);
++
++		mdelay(5);
++
++		priv->flags |= INIT_DONE;
++	}
++
++	mt9t112_mcu_write(ret, client, VAR(26, 7), priv->format->fmt);
++	mt9t112_mcu_write(ret, client, VAR(26, 9), priv->format->order);
++	mt9t112_mcu_write(ret, client, VAR8(1, 0), 0x06);
++
++	mt9t112_set_a_frame_size(client,
++				 priv->frame.width,
++				 priv->frame.height);
++
++	ECHECKER(ret, mt9t112_auto_focus_trigger(client));
++
++	dev_dbg(&client->dev, "format : %d\n", priv->format->code);
++	dev_dbg(&client->dev, "size   : %d x %d\n",
++		priv->frame.width,
++		priv->frame.height);
++
++	CLOCK_INFO(client, EXT_CLOCK);
++
++	return ret;
++}
++
++static int mt9t112_set_params(struct i2c_client *client, u32 width, u32 height,
++			      enum v4l2_mbus_pixelcode code)
++{
++	struct mt9t112_priv *priv = to_mt9t112(client);
++	int i;
++
++	priv->format = NULL;
++
++	/*
++	 * frame size check
++	 */
++	mt9t112_frame_check(&width, &height);
++
++	/*
++	 * get color format
++	 */
++	for (i = 0; i < ARRAY_SIZE(mt9t112_cfmts); i++)
++		if (mt9t112_cfmts[i].code == code)
++			break;
++
++	if (i == ARRAY_SIZE(mt9t112_cfmts))
++		return -EINVAL;
++
++	priv->frame.width  = (u16)width;
++	priv->frame.height = (u16)height;
++
++	priv->format = mt9t112_cfmts + i;
++
++	return 0;
++}
++
++static int mt9t112_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
++{
++	a->bounds.left			= 0;
++	a->bounds.top			= 0;
++	a->bounds.width			= VGA_WIDTH;
++	a->bounds.height		= VGA_HEIGHT;
++	a->defrect			= a->bounds;
++	a->type				= V4L2_BUF_TYPE_VIDEO_CAPTURE;
++	a->pixelaspect.numerator	= 1;
++	a->pixelaspect.denominator	= 1;
++
++	return 0;
++}
++
++static int mt9t112_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
++{
++	a->c.left	= 0;
++	a->c.top	= 0;
++	a->c.width	= VGA_WIDTH;
++	a->c.height	= VGA_HEIGHT;
++	a->type		= V4L2_BUF_TYPE_VIDEO_CAPTURE;
++
++	return 0;
++}
++
++static int mt9t112_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
++{
++	struct i2c_client *client = sd->priv;
++	struct v4l2_rect *rect = &a->c;
++
++	return mt9t112_set_params(client, rect->width, rect->height,
++				 V4L2_MBUS_FMT_YUYV8_2X8_BE);
++}
++
++static int mt9t112_g_fmt(struct v4l2_subdev *sd,
++			 struct v4l2_mbus_framefmt *mf)
++{
++	struct i2c_client *client = sd->priv;
++	struct mt9t112_priv *priv = to_mt9t112(client);
++
++	if (!priv->format) {
++		int ret = mt9t112_set_params(client, VGA_WIDTH, VGA_HEIGHT,
++					     V4L2_MBUS_FMT_YUYV8_2X8_BE);
++		if (ret < 0)
++			return ret;
++	}
++
++	mf->width	= priv->frame.width;
++	mf->height	= priv->frame.height;
++	/* TODO: set colorspace */
++	mf->code	= priv->format->code;
++	mf->field	= V4L2_FIELD_NONE;
++
++	return 0;
++}
++
++static int mt9t112_s_fmt(struct v4l2_subdev *sd,
++			 struct v4l2_mbus_framefmt *mf)
++{
++	struct i2c_client *client = sd->priv;
++
++	/* TODO: set colorspace */
++	return mt9t112_set_params(client, mf->width, mf->height, mf->code);
++}
++
++static int mt9t112_try_fmt(struct v4l2_subdev *sd,
++			   struct v4l2_mbus_framefmt *mf)
++{
++	mt9t112_frame_check(&mf->width, &mf->height);
++
++	/* TODO: set colorspace */
++	mf->field = V4L2_FIELD_NONE;
++
++	return 0;
++}
++
++static int mt9t112_enum_fmt(struct v4l2_subdev *sd, int index,
++			   enum v4l2_mbus_pixelcode *code)
++{
++	if ((unsigned int)index >= ARRAY_SIZE(mt9t112_cfmts))
++		return -EINVAL;
++
++	*code = mt9t112_cfmts[index].code;
++	return 0;
++}
++
++static struct v4l2_subdev_video_ops mt9t112_subdev_video_ops = {
++	.s_stream	= mt9t112_s_stream,
++	.g_mbus_fmt	= mt9t112_g_fmt,
++	.s_mbus_fmt	= mt9t112_s_fmt,
++	.try_mbus_fmt	= mt9t112_try_fmt,
++	.cropcap	= mt9t112_cropcap,
++	.g_crop		= mt9t112_g_crop,
++	.s_crop		= mt9t112_s_crop,
++	.enum_mbus_fmt	= mt9t112_enum_fmt,
++};
++
++/************************************************************************
++
++
++			i2c driver
++
++
++************************************************************************/
++static struct v4l2_subdev_ops mt9t112_subdev_ops = {
++	.core	= &mt9t112_subdev_core_ops,
++	.video	= &mt9t112_subdev_video_ops,
++};
++
++static int mt9t112_camera_probe(struct soc_camera_device *icd,
++				struct i2c_client *client)
++{
++	struct mt9t112_priv *priv = to_mt9t112(client);
++	const char          *devname;
++	int                  chipid;
++
++	/*
++	 * We must have a parent by now. And it cannot be a wrong one.
++	 * So this entire test is completely redundant.
++	 */
++	if (!icd->dev.parent ||
++	    to_soc_camera_host(icd->dev.parent)->nr != icd->iface)
++		return -ENODEV;
++
++	/*
++	 * check and show chip ID
++	 */
++	mt9t112_reg_read(chipid, client, 0x0000);
++
++	switch (chipid) {
++	case 0x2680:
++		devname = "mt9t111";
++		priv->model = V4L2_IDENT_MT9T111;
++		break;
++	case 0x2682:
++		devname = "mt9t112";
++		priv->model = V4L2_IDENT_MT9T112;
++		break;
++	default:
++		dev_err(&client->dev, "Product ID error %04x\n", chipid);
++		return -ENODEV;
++	}
++
++	dev_info(&client->dev, "%s chip ID %04x\n", devname, chipid);
++
++	return 0;
++}
++
++static int mt9t112_probe(struct i2c_client *client,
++			 const struct i2c_device_id *did)
++{
++	struct mt9t112_priv        *priv;
++	struct soc_camera_device   *icd = client->dev.platform_data;
++	struct soc_camera_link     *icl;
++	int                         ret;
++
++	if (!icd) {
++		dev_err(&client->dev, "mt9t112: missing soc-camera data!\n");
++		return -EINVAL;
++	}
++
++	icl = to_soc_camera_link(icd);
++	if (!icl || !icl->priv)
++		return -EINVAL;
++
++	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
++	if (!priv)
++		return -ENOMEM;
++
++	priv->info = icl->priv;
++
++	v4l2_i2c_subdev_init(&priv->subdev, client, &mt9t112_subdev_ops);
++
++	icd->ops = &mt9t112_ops;
++
++	ret = mt9t112_camera_probe(icd, client);
++	if (ret) {
++		icd->ops = NULL;
++		i2c_set_clientdata(client, NULL);
++		kfree(priv);
++	}
++
++	return ret;
++}
++
++static int mt9t112_remove(struct i2c_client *client)
++{
++	struct mt9t112_priv *priv = to_mt9t112(client);
++	struct soc_camera_device *icd = client->dev.platform_data;
++
++	icd->ops = NULL;
++	i2c_set_clientdata(client, NULL);
++	kfree(priv);
++	return 0;
++}
++
++static const struct i2c_device_id mt9t112_id[] = {
++	{ "mt9t112", 0 },
++	{ }
++};
++MODULE_DEVICE_TABLE(i2c, mt9t112_id);
++
++static struct i2c_driver mt9t112_i2c_driver = {
++	.driver = {
++		.name = "mt9t112",
++	},
++	.probe    = mt9t112_probe,
++	.remove   = mt9t112_remove,
++	.id_table = mt9t112_id,
++};
++
++/************************************************************************
++
++
++			module function
++
++
++************************************************************************/
++static int __init mt9t112_module_init(void)
++{
++	return i2c_add_driver(&mt9t112_i2c_driver);
++}
++
++static void __exit mt9t112_module_exit(void)
++{
++	i2c_del_driver(&mt9t112_i2c_driver);
++}
++
++module_init(mt9t112_module_init);
++module_exit(mt9t112_module_exit);
++
++MODULE_DESCRIPTION("SoC Camera driver for mt9t112");
++MODULE_AUTHOR("Kuninori Morimoto");
++MODULE_LICENSE("GPL v2");
+diff --git a/include/media/mt9t112.h b/include/media/mt9t112.h
+new file mode 100644
+index 0000000..a43c74a
+--- /dev/null
++++ b/include/media/mt9t112.h
+@@ -0,0 +1,30 @@
++/* mt9t112 Camera
++ *
++ * Copyright (C) 2009 Renesas Solutions Corp.
++ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#ifndef __MT9T112_H__
++#define __MT9T112_H__
++
++#define MT9T112_FLAG_PCLK_RISING_EDGE	(1 << 0)
++#define MT9T112_FLAG_DATAWIDTH_8	(1 << 1) /* default width is 10 */
++
++struct mt9t112_pll_divider {
++	u8 m, n;
++	u8 p1, p2, p3, p4, p5, p6, p7;
++};
++
++/*
++ * mt9t112 camera info
++ */
++struct mt9t112_camera_info {
++	u32 flags;
++	struct mt9t112_pll_divider divider;
++};
++
++#endif /* __MT9T112_H__ */
+diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h
+index 91942db..6cc107d 100644
+--- a/include/media/v4l2-chip-ident.h
++++ b/include/media/v4l2-chip-ident.h
+@@ -267,6 +267,8 @@ enum {
+ 	V4L2_IDENT_MT9V022IX7ATC	= 45010, /* No way to detect "normal" I77ATx */
+ 	V4L2_IDENT_MT9V022IX7ATM	= 45015, /* and "lead free" IA7ATx chips */
+ 	V4L2_IDENT_MT9T031		= 45020,
++	V4L2_IDENT_MT9T111		= 45021,
++	V4L2_IDENT_MT9T112		= 45022,
+ 	V4L2_IDENT_MT9V111		= 45031,
+ 	V4L2_IDENT_MT9V112		= 45032,
+ 
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0050-soc-camera-mt9t112-modify-exiting-conditions-from-st.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0050-soc-camera-mt9t112-modify-exiting-conditions-from-st.patch
new file mode 100644
index 0000000..81c74f1
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0050-soc-camera-mt9t112-modify-exiting-conditions-from-st.patch
@@ -0,0 +1,31 @@
+From c3080e6e6ea59efc7f7812951a9972229fcc5078 Mon Sep 17 00:00:00 2001
+From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
+Date: Tue, 2 Feb 2010 13:17:54 +0900
+Subject: [PATCH 50/75] soc-camera: mt9t112: modify exiting conditions from standby mode
+
+This polling is needed if camera is in standby mode, but current exiting
+condition is inverted.
+
+Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
+Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
+---
+ drivers/media/video/mt9t112.c |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/drivers/media/video/mt9t112.c b/drivers/media/video/mt9t112.c
+index fc4dd60..7438f8d 100644
+--- a/drivers/media/video/mt9t112.c
++++ b/drivers/media/video/mt9t112.c
+@@ -514,7 +514,7 @@ static int mt9t112_init_pll(const struct i2c_client *client)
+ 	/* poll to verify out of standby. Must Poll this bit */
+ 	for (i = 0; i < 100; i++) {
+ 		mt9t112_reg_read(data, client, 0x0018);
+-		if (0x4000 & data)
++		if (!(0x4000 & data))
+ 			break;
+ 
+ 		mdelay(10);
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0051-mt9t112-Migrate-from-soc_camera-to-v4l2-int-device.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0051-mt9t112-Migrate-from-soc_camera-to-v4l2-int-device.patch
new file mode 100644
index 0000000..d2cdbff
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0051-mt9t112-Migrate-from-soc_camera-to-v4l2-int-device.patch
@@ -0,0 +1,934 @@
+From f4b417bf9b373e042f6cfb921bc67dd18d0a752f Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Thu, 1 Jul 2010 07:26:38 -0500
+Subject: [PATCH 51/75] mt9t112: Migrate from soc_camera to v4l2-int-device
+
+This is to use the driver with the old OMAP3 Camera-ISP platform.
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ drivers/media/video/Kconfig   |   12 +-
+ drivers/media/video/Makefile  |    2 +-
+ drivers/media/video/mt9t112.c |  658 +++++++++++++++++++++++------------------
+ include/media/mt9t112.h       |   13 +
+ 4 files changed, 391 insertions(+), 294 deletions(-)
+
+diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
+index 7caade9..4c1fb0f 100644
+--- a/drivers/media/video/Kconfig
++++ b/drivers/media/video/Kconfig
+@@ -354,6 +354,12 @@ config VIDEO_MT9P012
+ 	  MT9P012 camera.  It is currently working with the TI OMAP3
+ 	  camera controller.
+ 
++config VIDEO_MT9T112
++	tristate "mt9t112 support"
++	depends on I2C && VIDEO_V4L2
++	help
++	  This driver supports MT9T112 cameras from Aptina.
++
+ config VIDEO_DW9710
+ 	tristate "Lens driver for DW9710"
+ 	depends on I2C && VIDEO_V4L2
+@@ -832,12 +838,6 @@ config SOC_CAMERA_MT9T031
+ 	help
+ 	  This driver supports MT9T031 cameras from Micron.
+ 
+-config SOC_CAMERA_MT9T112
+-	tristate "mt9t112 support"
+-	depends on SOC_CAMERA && I2C
+-	help
+-	  This driver supports MT9T112 cameras from Aptina.
+-
+ config SOC_CAMERA_MT9V022
+ 	tristate "mt9v022 support"
+ 	depends on SOC_CAMERA && I2C
+diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
+index 61ae13f..fb7e46c 100644
+--- a/drivers/media/video/Makefile
++++ b/drivers/media/video/Makefile
+@@ -80,7 +80,6 @@ obj-$(CONFIG_VIDEO_MT9V113) += mt9v113.o
+ obj-$(CONFIG_SOC_CAMERA_MT9M001)	+= mt9m001.o
+ obj-$(CONFIG_SOC_CAMERA_MT9M111)	+= mt9m111.o
+ obj-$(CONFIG_SOC_CAMERA_MT9T031)	+= mt9t031.o
+-obj-$(CONFIG_SOC_CAMERA_MT9T112)	+= mt9t112.o
+ obj-$(CONFIG_SOC_CAMERA_MT9V022)	+= mt9v022.o
+ obj-$(CONFIG_SOC_CAMERA_OV772X)		+= ov772x.o
+ obj-$(CONFIG_SOC_CAMERA_OV9640)		+= ov9640.o
+@@ -129,6 +128,7 @@ obj-$(CONFIG_VIDEO_CAFE_CCIC) += cafe_ccic.o
+ obj-y				+= isp/
+ obj-$(CONFIG_VIDEO_OMAP3)	+= omap34xxcam.o
+ obj-$(CONFIG_VIDEO_MT9P012)     += mt9p012.o
++obj-$(CONFIG_VIDEO_MT9T112)	+= mt9t112.o
+ obj-$(CONFIG_VIDEO_DW9710)	+= dw9710.o
+ obj-$(CONFIG_VIDEO_TPS61059)    += tps61059.o
+ obj-$(CONFIG_VIDEO_OV3640)	+= ov3640.o
+diff --git a/drivers/media/video/mt9t112.c b/drivers/media/video/mt9t112.c
+index 7438f8d..6f54394 100644
+--- a/drivers/media/video/mt9t112.c
++++ b/drivers/media/video/mt9t112.c
+@@ -25,10 +25,8 @@
+ #include <linux/videodev2.h>
+ 
+ #include <media/mt9t112.h>
+-#include <media/soc_camera.h>
+-#include <media/soc_mediabus.h>
++#include <media/v4l2-int-device.h>
+ #include <media/v4l2-chip-ident.h>
+-#include <media/v4l2-common.h>
+ 
+ /* you can check PLL/clock info */
+ /* #define EXT_CLOCK 24000000 */
+@@ -43,8 +41,8 @@
+ /*
+  * frame size
+  */
+-#define MAX_WIDTH   2048
+-#define MAX_HEIGHT  1536
++#define MAX_WIDTH   640 /* 2048 */
++#define MAX_HEIGHT  480 /* 1536 */
+ 
+ #define VGA_WIDTH   640
+ #define VGA_HEIGHT  480
+@@ -91,20 +89,12 @@ struct mt9t112_frame_size {
+ 	u16 height;
+ };
+ 
+-struct mt9t112_format {
+-	enum v4l2_mbus_pixelcode code;
+-	enum v4l2_colorspace colorspace;
+-	u16 fmt;
+-	u16 order;
+-};
+-
+ struct mt9t112_priv {
+-	struct v4l2_subdev		 subdev;
++	struct mt9t112_platform_data	*pdata;
++	struct v4l2_int_device		*v4l2_int_device;
+ 	struct mt9t112_camera_info	*info;
+ 	struct i2c_client		*client;
+-	struct soc_camera_device	 icd;
+-	struct mt9t112_frame_size	 frame;
+-	const struct mt9t112_format	*format;
++	struct v4l2_pix_format		 pix;
+ 	int				 model;
+ 	u32				 flags;
+ /* for flags */
+@@ -119,38 +109,42 @@ struct mt9t112_priv {
+ 
+ ************************************************************************/
+ 
+-static const struct mt9t112_format mt9t112_cfmts[] = {
++const static struct v4l2_fmtdesc mt9t112_formats[] = {
++	{
++		.description	= "YUYV (YUV 4:2:2), packed",
++		.pixelformat	= V4L2_PIX_FMT_YUYV,
++	},
+ 	{
+-		.code		= V4L2_MBUS_FMT_YUYV8_2X8_BE,
+-		.colorspace	= V4L2_COLORSPACE_JPEG,
+-		.fmt		= 1,
+-		.order		= 0,
+-	}, {
+-		.code		= V4L2_MBUS_FMT_YVYU8_2X8_BE,
+-		.colorspace	= V4L2_COLORSPACE_JPEG,
+-		.fmt		= 1,
+-		.order		= 1,
+-	}, {
+-		.code		= V4L2_MBUS_FMT_YUYV8_2X8_LE,
+-		.colorspace	= V4L2_COLORSPACE_JPEG,
+-		.fmt		= 1,
+-		.order		= 2,
+-	}, {
+-		.code		= V4L2_MBUS_FMT_YVYU8_2X8_LE,
+-		.colorspace	= V4L2_COLORSPACE_JPEG,
+-		.fmt		= 1,
+-		.order		= 3,
+-	}, {
+-		.code		= V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE,
+-		.colorspace	= V4L2_COLORSPACE_SRGB,
+-		.fmt		= 8,
+-		.order		= 2,
+-	}, {
+-		.code		= V4L2_MBUS_FMT_RGB565_2X8_LE,
+-		.colorspace	= V4L2_COLORSPACE_SRGB,
+-		.fmt		= 4,
+-		.order		= 2,
++		.description	= "RGB555, le",
++		.pixelformat	= V4L2_PIX_FMT_RGB555,
+ 	},
++	{
++		.description	= "RGB565, le",
++		.pixelformat	= V4L2_PIX_FMT_RGB565,
++	},
++};
++
++/************************************************************************
++
++
++			supported sizes
++
++
++************************************************************************/
++const static struct mt9t112_frame_size mt9t112_sizes[] = {
++	{  640, 480 },
++	/* { 2048, 1536} */
++};
++
++/************************************************************************
++
++
++			supported sizes
++
++
++************************************************************************/
++const struct v4l2_fract mt9t112_frameintervals[] = {
++	{  .numerator = 1, .denominator = 10 }
+ };
+ 
+ /************************************************************************
+@@ -160,11 +154,32 @@ static const struct mt9t112_format mt9t112_cfmts[] = {
+ 
+ 
+ ************************************************************************/
+-static struct mt9t112_priv *to_mt9t112(const struct i2c_client *client)
++static u16 mt9t112_pixfmt_to_fmt(u32 pixelformat)
+ {
+-	return container_of(i2c_get_clientdata(client),
+-			    struct mt9t112_priv,
+-			    subdev);
++	switch (pixelformat) {
++	case V4L2_PIX_FMT_RGB555:
++		return 8;
++	case V4L2_PIX_FMT_RGB565:
++		return 4;
++	case V4L2_PIX_FMT_YUYV:
++		/* FALLTHROUGH */
++	default:
++		return 1;
++	}
++}
++
++static u16 mt9t112_pixfmt_to_order(u32 pixelformat)
++{
++	switch (pixelformat) {
++	case V4L2_PIX_FMT_RGB555:
++		/* FALLTHROUGH */
++	case V4L2_PIX_FMT_RGB565:
++		return 2;
++	case V4L2_PIX_FMT_YUYV:
++		/* FALLTHROUGH */
++	default:
++		return 0;
++	}
+ }
+ 
+ static int __mt9t112_reg_read(const struct i2c_client *client, u16 command)
+@@ -438,7 +453,7 @@ static int mt9t112_set_pll_dividers(const struct i2c_client *client,
+ 
+ static int mt9t112_init_pll(const struct i2c_client *client)
+ {
+-	struct mt9t112_priv *priv = to_mt9t112(client);
++	struct mt9t112_priv *priv = i2c_get_clientdata(client);
+ 	int data, i, ret;
+ 
+ 	mt9t112_reg_mask_set(ret, client, 0x0014, 0x003, 0x0001);
+@@ -757,167 +772,12 @@ static int mt9t112_init_camera(const struct i2c_client *client)
+ 	return ret;
+ }
+ 
+-/************************************************************************
+-
+-
+-			soc_camera_ops
+-
+-
+-************************************************************************/
+-static int mt9t112_set_bus_param(struct soc_camera_device *icd,
+-				 unsigned long	flags)
+-{
+-	return 0;
+-}
+-
+-static unsigned long mt9t112_query_bus_param(struct soc_camera_device *icd)
+-{
+-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+-	struct mt9t112_priv *priv = to_mt9t112(client);
+-	struct soc_camera_link *icl = to_soc_camera_link(icd);
+-	unsigned long flags = SOCAM_MASTER | SOCAM_VSYNC_ACTIVE_HIGH |
+-		SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_DATA_ACTIVE_HIGH;
+-
+-	flags |= (priv->info->flags & MT9T112_FLAG_PCLK_RISING_EDGE) ?
+-		SOCAM_PCLK_SAMPLE_RISING : SOCAM_PCLK_SAMPLE_FALLING;
+-
+-	if (priv->info->flags & MT9T112_FLAG_DATAWIDTH_8)
+-		flags |= SOCAM_DATAWIDTH_8;
+-	else
+-		flags |= SOCAM_DATAWIDTH_10;
+-
+-	return soc_camera_apply_sensor_flags(icl, flags);
+-}
+-
+-static struct soc_camera_ops mt9t112_ops = {
+-	.set_bus_param		= mt9t112_set_bus_param,
+-	.query_bus_param	= mt9t112_query_bus_param,
+-};
+-
+-/************************************************************************
+-
+-
+-			v4l2_subdev_core_ops
+-
+-
+-************************************************************************/
+-static int mt9t112_g_chip_ident(struct v4l2_subdev *sd,
+-				struct v4l2_dbg_chip_ident *id)
+-{
+-	struct i2c_client *client = sd->priv;
+-	struct mt9t112_priv *priv = to_mt9t112(client);
+-
+-	id->ident    = priv->model;
+-	id->revision = 0;
+-
+-	return 0;
+-}
+-
+-#ifdef CONFIG_VIDEO_ADV_DEBUG
+-static int mt9t112_g_register(struct v4l2_subdev *sd,
+-			      struct v4l2_dbg_register *reg)
+-{
+-	struct i2c_client *client = sd->priv;
+-	int                ret;
+-
+-	reg->size = 2;
+-	mt9t112_reg_read(ret, client, reg->reg);
+-
+-	reg->val = (__u64)ret;
+-
+-	return 0;
+-}
+-
+-static int mt9t112_s_register(struct v4l2_subdev *sd,
+-			      struct v4l2_dbg_register *reg)
+-{
+-	struct i2c_client *client = sd->priv;
+-	int ret;
+-
+-	mt9t112_reg_write(ret, client, reg->reg, reg->val);
+-
+-	return ret;
+-}
+-#endif
+-
+-static struct v4l2_subdev_core_ops mt9t112_subdev_core_ops = {
+-	.g_chip_ident	= mt9t112_g_chip_ident,
+-#ifdef CONFIG_VIDEO_ADV_DEBUG
+-	.g_register	= mt9t112_g_register,
+-	.s_register	= mt9t112_s_register,
+-#endif
+-};
+-
+-
+-/************************************************************************
+-
+-
+-			v4l2_subdev_video_ops
+-
+-
+-************************************************************************/
+-static int mt9t112_s_stream(struct v4l2_subdev *sd, int enable)
+-{
+-	struct i2c_client *client = sd->priv;
+-	struct mt9t112_priv *priv = to_mt9t112(client);
+-	int ret = 0;
+-
+-	if (!enable) {
+-		/* FIXME
+-		 *
+-		 * If user selected large output size,
+-		 * and used it long time,
+-		 * mt9t112 camera will be very warm.
+-		 *
+-		 * But current driver can not stop mt9t112 camera.
+-		 * So, set small size here to solve this problem.
+-		 */
+-		mt9t112_set_a_frame_size(client, VGA_WIDTH, VGA_HEIGHT);
+-		return ret;
+-	}
+-
+-	if (!(priv->flags & INIT_DONE)) {
+-		u16 param = (MT9T112_FLAG_PCLK_RISING_EDGE &
+-			     priv->info->flags) ? 0x0001 : 0x0000;
+-
+-		ECHECKER(ret, mt9t112_init_camera(client));
+-
+-		/* Invert PCLK (Data sampled on falling edge of pixclk) */
+-		mt9t112_reg_write(ret, client, 0x3C20, param);
+-
+-		mdelay(5);
+-
+-		priv->flags |= INIT_DONE;
+-	}
+-
+-	mt9t112_mcu_write(ret, client, VAR(26, 7), priv->format->fmt);
+-	mt9t112_mcu_write(ret, client, VAR(26, 9), priv->format->order);
+-	mt9t112_mcu_write(ret, client, VAR8(1, 0), 0x06);
+-
+-	mt9t112_set_a_frame_size(client,
+-				 priv->frame.width,
+-				 priv->frame.height);
+-
+-	ECHECKER(ret, mt9t112_auto_focus_trigger(client));
+-
+-	dev_dbg(&client->dev, "format : %d\n", priv->format->code);
+-	dev_dbg(&client->dev, "size   : %d x %d\n",
+-		priv->frame.width,
+-		priv->frame.height);
+-
+-	CLOCK_INFO(client, EXT_CLOCK);
+-
+-	return ret;
+-}
+-
+ static int mt9t112_set_params(struct i2c_client *client, u32 width, u32 height,
+-			      enum v4l2_mbus_pixelcode code)
++			      u32 pixelformat)
+ {
+-	struct mt9t112_priv *priv = to_mt9t112(client);
++	struct mt9t112_priv *priv = i2c_get_clientdata(client);
+ 	int i;
+ 
+-	priv->format = NULL;
+-
+ 	/*
+ 	 * frame size check
+ 	 */
+@@ -926,22 +786,23 @@ static int mt9t112_set_params(struct i2c_client *client, u32 width, u32 height,
+ 	/*
+ 	 * get color format
+ 	 */
+-	for (i = 0; i < ARRAY_SIZE(mt9t112_cfmts); i++)
+-		if (mt9t112_cfmts[i].code == code)
++	for (i = 0; i < ARRAY_SIZE(mt9t112_formats); i++)
++		if (mt9t112_formats[i].pixelformat == pixelformat)
+ 			break;
+ 
+-	if (i == ARRAY_SIZE(mt9t112_cfmts))
++	if (i == ARRAY_SIZE(mt9t112_formats))
+ 		return -EINVAL;
+ 
+-	priv->frame.width  = (u16)width;
+-	priv->frame.height = (u16)height;
++	priv->pix.width  = (u16)width;
++	priv->pix.height = (u16)height;
+ 
+-	priv->format = mt9t112_cfmts + i;
++	priv->pix.pixelformat = pixelformat;
+ 
+ 	return 0;
+ }
+ 
+-static int mt9t112_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
++static int mt9t112_v4l2_int_cropcap(struct v4l2_int_device *s,
++				    struct v4l2_cropcap *a)
+ {
+ 	a->bounds.left			= 0;
+ 	a->bounds.top			= 0;
+@@ -955,7 +816,8 @@ static int mt9t112_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
+ 	return 0;
+ }
+ 
+-static int mt9t112_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
++static int mt9t112_v4l2_int_g_crop(struct v4l2_int_device *s,
++				   struct v4l2_crop *a)
+ {
+ 	a->c.left	= 0;
+ 	a->c.top	= 0;
+@@ -966,77 +828,116 @@ static int mt9t112_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
+ 	return 0;
+ }
+ 
+-static int mt9t112_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
++static int mt9t112_v4l2_int_s_crop(struct v4l2_int_device *s,
++				   struct v4l2_crop *a)
+ {
+-	struct i2c_client *client = sd->priv;
+-	struct v4l2_rect *rect = &a->c;
+-
+-	return mt9t112_set_params(client, rect->width, rect->height,
+-				 V4L2_MBUS_FMT_YUYV8_2X8_BE);
++	if ((a->c.left != 0) ||
++	    (a->c.top != 0) ||
++	    (a->c.width != VGA_WIDTH) ||
++	    (a->c.height != VGA_HEIGHT)) {
++		return -EINVAL;
++	}
++	return 0;
+ }
+ 
+-static int mt9t112_g_fmt(struct v4l2_subdev *sd,
+-			 struct v4l2_mbus_framefmt *mf)
++static int mt9t112_v4l2_int_g_fmt_cap(struct v4l2_int_device *s,
++				      struct v4l2_format *f)
+ {
+-	struct i2c_client *client = sd->priv;
+-	struct mt9t112_priv *priv = to_mt9t112(client);
++	struct mt9t112_priv *priv = s->priv;
++	struct i2c_client *client = priv->client;
+ 
+-	if (!priv->format) {
++	if ((priv->pix.pixelformat == 0) ||
++	    (priv->pix.width == 0) ||
++	    (priv->pix.height == 0)) {
+ 		int ret = mt9t112_set_params(client, VGA_WIDTH, VGA_HEIGHT,
+-					     V4L2_MBUS_FMT_YUYV8_2X8_BE);
++					     V4L2_PIX_FMT_YUYV);
+ 		if (ret < 0)
+ 			return ret;
+ 	}
+ 
+-	mf->width	= priv->frame.width;
+-	mf->height	= priv->frame.height;
++	f->fmt.pix.width	= priv->pix.width;
++	f->fmt.pix.height	= priv->pix.height;
+ 	/* TODO: set colorspace */
+-	mf->code	= priv->format->code;
+-	mf->field	= V4L2_FIELD_NONE;
++	f->fmt.pix.pixelformat	= priv->pix.pixelformat;
++	f->fmt.pix.field	= V4L2_FIELD_NONE;
+ 
+ 	return 0;
+ }
+ 
+-static int mt9t112_s_fmt(struct v4l2_subdev *sd,
+-			 struct v4l2_mbus_framefmt *mf)
++
++static int mt9t112_v4l2_int_s_fmt_cap(struct v4l2_int_device *s,
++				      struct v4l2_format *f)
+ {
+-	struct i2c_client *client = sd->priv;
++	struct mt9t112_priv *priv = s->priv;
++	struct i2c_client *client = priv->client;
+ 
+ 	/* TODO: set colorspace */
+-	return mt9t112_set_params(client, mf->width, mf->height, mf->code);
++	return mt9t112_set_params(client, f->fmt.pix.width, f->fmt.pix.height,
++				  f->fmt.pix.pixelformat);
+ }
+ 
+-static int mt9t112_try_fmt(struct v4l2_subdev *sd,
+-			   struct v4l2_mbus_framefmt *mf)
++static int mt9t112_v4l2_int_try_fmt_cap(struct v4l2_int_device *s,
++					struct v4l2_format *f)
+ {
+-	mt9t112_frame_check(&mf->width, &mf->height);
++	mt9t112_frame_check(&f->fmt.pix.width, &f->fmt.pix.height);
+ 
+ 	/* TODO: set colorspace */
+-	mf->field = V4L2_FIELD_NONE;
++	f->fmt.pix.field = V4L2_FIELD_NONE;
+ 
+ 	return 0;
+ }
+ 
+-static int mt9t112_enum_fmt(struct v4l2_subdev *sd, int index,
+-			   enum v4l2_mbus_pixelcode *code)
++static int mt9t112_v4l2_int_enum_fmt_cap(struct v4l2_int_device *s,
++					 struct v4l2_fmtdesc *fmt)
+ {
+-	if ((unsigned int)index >= ARRAY_SIZE(mt9t112_cfmts))
++	int index = fmt->index;
++	enum v4l2_buf_type type = fmt->type;
++
++	memset(fmt, 0, sizeof(*fmt));
++	fmt->index = index;
++	fmt->type = type;
++
++	switch (fmt->type) {
++	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
++		if (index >= ARRAY_SIZE(mt9t112_formats))
++			return -EINVAL;
++	break;
++	default:
+ 		return -EINVAL;
++	}
+ 
+-	*code = mt9t112_cfmts[index].code;
++	fmt->flags = mt9t112_formats[index].flags;
++	strlcpy(fmt->description, mt9t112_formats[index].description,
++					sizeof(fmt->description));
++	fmt->pixelformat = mt9t112_formats[index].pixelformat;
+ 	return 0;
+ }
+ 
+-static struct v4l2_subdev_video_ops mt9t112_subdev_video_ops = {
+-	.s_stream	= mt9t112_s_stream,
+-	.g_mbus_fmt	= mt9t112_g_fmt,
+-	.s_mbus_fmt	= mt9t112_s_fmt,
+-	.try_mbus_fmt	= mt9t112_try_fmt,
+-	.cropcap	= mt9t112_cropcap,
+-	.g_crop		= mt9t112_g_crop,
+-	.s_crop		= mt9t112_s_crop,
+-	.enum_mbus_fmt	= mt9t112_enum_fmt,
+-};
++static int mt9t112_v4l2_int_s_parm(struct v4l2_int_device *s,
++				   struct v4l2_streamparm *a)
++{
++	/* TODO: set paramters */
++	return 0;
++}
++
++static int mt9t112_v4l2_int_g_parm(struct v4l2_int_device *s,
++				   struct v4l2_streamparm *a)
++{
++	struct v4l2_captureparm *cparm = &a->parm.capture;
++
++	if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
++		return -EINVAL;
++
++	memset(a, 0, sizeof(*a));
++	a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
++
++	cparm->capability = V4L2_CAP_TIMEPERFRAME;
++	/* FIXME: Is 10 fps really the only option? */
++	cparm->timeperframe.numerator = 1;
++	cparm->timeperframe.denominator = 10;
++
++	return 0;
++}
+ 
+ /************************************************************************
+ 
+@@ -1045,27 +946,14 @@ static struct v4l2_subdev_video_ops mt9t112_subdev_video_ops = {
+ 
+ 
+ ************************************************************************/
+-static struct v4l2_subdev_ops mt9t112_subdev_ops = {
+-	.core	= &mt9t112_subdev_core_ops,
+-	.video	= &mt9t112_subdev_video_ops,
+-};
+ 
+-static int mt9t112_camera_probe(struct soc_camera_device *icd,
+-				struct i2c_client *client)
++static int mt9t112_detect(struct i2c_client *client)
+ {
+-	struct mt9t112_priv *priv = to_mt9t112(client);
++	struct mt9t112_priv *priv = i2c_get_clientdata(client);
+ 	const char          *devname;
+ 	int                  chipid;
+ 
+ 	/*
+-	 * We must have a parent by now. And it cannot be a wrong one.
+-	 * So this entire test is completely redundant.
+-	 */
+-	if (!icd->dev.parent ||
+-	    to_soc_camera_host(icd->dev.parent)->nr != icd->iface)
+-		return -ENODEV;
+-
+-	/*
+ 	 * check and show chip ID
+ 	 */
+ 	mt9t112_reg_read(chipid, client, 0x0000);
+@@ -1089,37 +977,232 @@ static int mt9t112_camera_probe(struct soc_camera_device *icd,
+ 	return 0;
+ }
+ 
++static int mt9t112_v4l2_int_s_power(struct v4l2_int_device *s,
++				    enum v4l2_power power)
++{
++	struct mt9t112_priv *priv = s->priv;
++	struct i2c_client *client = priv->client;
++	int ret;
++
++	switch (power) {
++	case V4L2_POWER_STANDBY:
++		/* FALLTHROUGH */
++	case V4L2_POWER_OFF:
++		/* FIXME
++		 *
++		 * If user selected large output size,
++		 * and used it long time,
++		 * mt9t112 camera will be very warm.
++		 *
++		 * But current driver can not stop mt9t112 camera.
++		 * So, set small size here to solve this problem.
++		 */
++		mt9t112_set_a_frame_size(client, VGA_WIDTH, VGA_HEIGHT);
++
++		ret = priv->pdata->power_set(s, power);
++		if (ret < 0) {
++			dev_err(&client->dev, "Unable to set target board power "
++					 "state (OFF/STANDBY)\n");
++			return ret;
++		}
++		break;
++	case V4L2_POWER_ON:
++		ret = priv->pdata->power_set(s, power);
++		if (ret < 0) {
++			dev_err(&client->dev, "Unable to set target board power "
++					 "state (ON)\n");
++			return ret;
++		}
++		if (!(priv->flags & INIT_DONE)) {
++			u16 param = (MT9T112_FLAG_PCLK_RISING_EDGE &
++				     priv->info->flags) ? 0x0001 : 0x0000;
++
++			ECHECKER(ret, mt9t112_detect(client));
++			ECHECKER(ret, mt9t112_init_camera(client));
++
++			/* Invert PCLK (Data sampled on falling edge of pixclk) */
++			mt9t112_reg_write(ret, client, 0x3C20, param);
++
++			mdelay(5);
++
++			priv->flags |= INIT_DONE;
++		}
++
++		mt9t112_mcu_write(ret, client, VAR(26, 7),
++				  mt9t112_pixfmt_to_fmt(priv->pix.pixelformat));
++		mt9t112_mcu_write(ret, client, VAR(26, 9),
++				  mt9t112_pixfmt_to_order(priv->pix.pixelformat));
++		mt9t112_mcu_write(ret, client, VAR8(1, 0), 0x06);
++
++		mt9t112_set_a_frame_size(client,
++					 priv->pix.width,
++					 priv->pix.height);
++
++		ECHECKER(ret, mt9t112_auto_focus_trigger(client));
++
++		dev_dbg(&client->dev, "format : %d\n", priv->pix.pixelformat);
++		dev_dbg(&client->dev, "size   : %d x %d\n",
++			priv->pix.width,
++			priv->pix.height);
++
++		CLOCK_INFO(client, EXT_CLOCK);
++	}
++	return 0;
++}
++
++static int mt9t112_v4l2_int_g_priv(struct v4l2_int_device *s, void *p)
++{
++	struct mt9t112_priv *priv = s->priv;
++
++	return priv->pdata->priv_data_set(p);
++}
++
++static int mt9t112_v4l2_int_g_ifparm(struct v4l2_int_device *s,
++				     struct v4l2_ifparm *p)
++{
++	struct mt9t112_priv *priv = s->priv;
++	int rval;
++
++	if (p == NULL)
++		return -EINVAL;
++
++	if (!priv->pdata->ifparm)
++		return -EINVAL;
++
++	rval = priv->pdata->ifparm(p);
++	if (rval) {
++		v4l_err(priv->client, "g_ifparm.Err[%d]\n", rval);
++		return rval;
++	}
++
++	p->u.ycbcr.clock_curr = 40 * 1000000; /* temporal value */
++
++	return 0;
++}
++
++static int mt9t112_v4l2_int_enum_framesizes(struct v4l2_int_device *s,
++					    struct v4l2_frmsizeenum *frms)
++{
++	int ifmt;
++
++	for (ifmt = 0; ifmt < ARRAY_SIZE(mt9t112_formats); ifmt++)
++		if (mt9t112_formats[ifmt].pixelformat == frms->pixel_format)
++			break;
++
++	if (ifmt == ARRAY_SIZE(mt9t112_formats))
++		return -EINVAL;
++
++	/* Do we already reached all discrete framesizes? */
++	if (frms->index >= ARRAY_SIZE(mt9t112_sizes))
++		return -EINVAL;
++
++	frms->type = V4L2_FRMSIZE_TYPE_DISCRETE;
++	frms->discrete.width = mt9t112_sizes[frms->index].width;
++	frms->discrete.height = mt9t112_sizes[frms->index].height;
++
++	return 0;
++
++}
++
++static int mt9t112_v4l2_int_enum_frameintervals(struct v4l2_int_device *s,
++						struct v4l2_frmivalenum *frmi)
++{
++	int ifmt;
++
++	for (ifmt = 0; ifmt < ARRAY_SIZE(mt9t112_formats); ifmt++)
++		if (mt9t112_formats[ifmt].pixelformat == frmi->pixel_format)
++			break;
++
++	if (ifmt == ARRAY_SIZE(mt9t112_formats))
++		return -EINVAL;
++
++	if (frmi->index >= ARRAY_SIZE(mt9t112_frameintervals))
++		return -EINVAL;
++
++	frmi->type = V4L2_FRMSIZE_TYPE_DISCRETE;
++	frmi->discrete.numerator =
++				mt9t112_frameintervals[frmi->index].numerator;
++	frmi->discrete.denominator =
++				mt9t112_frameintervals[frmi->index].denominator;
++	return 0;
++}
++
++static struct v4l2_int_ioctl_desc mt9t112_ioctl_desc[] = {
++	{ .num = vidioc_int_enum_framesizes_num,
++	  .func = (v4l2_int_ioctl_func *)mt9t112_v4l2_int_enum_framesizes },
++	{ .num = vidioc_int_enum_frameintervals_num,
++	  .func = (v4l2_int_ioctl_func *)mt9t112_v4l2_int_enum_frameintervals },
++	{ .num = vidioc_int_s_power_num,
++	  .func = (v4l2_int_ioctl_func *)mt9t112_v4l2_int_s_power },
++	{ .num = vidioc_int_g_priv_num,
++	  .func = (v4l2_int_ioctl_func *)mt9t112_v4l2_int_g_priv },
++	{ .num = vidioc_int_g_ifparm_num,
++	  .func = (v4l2_int_ioctl_func *)mt9t112_v4l2_int_g_ifparm },
++	{ .num = vidioc_int_enum_fmt_cap_num,
++	  .func = (v4l2_int_ioctl_func *)mt9t112_v4l2_int_enum_fmt_cap },
++	{ .num = vidioc_int_try_fmt_cap_num,
++	  .func = (v4l2_int_ioctl_func *)mt9t112_v4l2_int_try_fmt_cap },
++	{ .num = vidioc_int_g_fmt_cap_num,
++	  .func = (v4l2_int_ioctl_func *)mt9t112_v4l2_int_g_fmt_cap },
++	{ .num = vidioc_int_s_fmt_cap_num,
++	  .func = (v4l2_int_ioctl_func *)mt9t112_v4l2_int_s_fmt_cap },
++	{ .num = vidioc_int_g_parm_num,
++	  .func = (v4l2_int_ioctl_func *)mt9t112_v4l2_int_g_parm },
++	{ .num = vidioc_int_s_parm_num,
++	  .func = (v4l2_int_ioctl_func *)mt9t112_v4l2_int_s_parm },
++	{ .num = vidioc_int_cropcap_num,
++	  .func = (v4l2_int_ioctl_func *)mt9t112_v4l2_int_cropcap },
++	{ .num = vidioc_int_g_crop_num,
++	  .func = (v4l2_int_ioctl_func *)mt9t112_v4l2_int_g_crop },
++	{ .num = vidioc_int_s_crop_num,
++	  .func = (v4l2_int_ioctl_func *)mt9t112_v4l2_int_s_crop },
++};
++
++static struct v4l2_int_slave mt9t112_slave = {
++	.ioctls = mt9t112_ioctl_desc,
++	.num_ioctls = ARRAY_SIZE(mt9t112_ioctl_desc),
++};
++
+ static int mt9t112_probe(struct i2c_client *client,
+ 			 const struct i2c_device_id *did)
+ {
+ 	struct mt9t112_priv        *priv;
+-	struct soc_camera_device   *icd = client->dev.platform_data;
+-	struct soc_camera_link     *icl;
++	struct v4l2_int_device     *v4l2_int_device;
+ 	int                         ret;
+ 
+-	if (!icd) {
+-		dev_err(&client->dev, "mt9t112: missing soc-camera data!\n");
+-		return -EINVAL;
++	if (!client->dev.platform_data) {
++		dev_err(&client->dev, "no platform data?\n");
++		return -ENODEV;
+ 	}
+ 
+-	icl = to_soc_camera_link(icd);
+-	if (!icl || !icl->priv)
+-		return -EINVAL;
+-
+ 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ 	if (!priv)
+ 		return -ENOMEM;
+ 
+-	priv->info = icl->priv;
++	v4l2_int_device = kzalloc(sizeof(*v4l2_int_device), GFP_KERNEL);
++	if (!v4l2_int_device) {
++		kfree(priv);
++		return -ENOMEM;
++	}
+ 
+-	v4l2_i2c_subdev_init(&priv->subdev, client, &mt9t112_subdev_ops);
++	v4l2_int_device->module = THIS_MODULE;
++	strncpy(v4l2_int_device->name, "mt9t112", sizeof(v4l2_int_device->name));
++	v4l2_int_device->type = v4l2_int_type_slave;
++	v4l2_int_device->u.slave = &mt9t112_slave;
++	v4l2_int_device->priv = priv;
+ 
+-	icd->ops = &mt9t112_ops;
++	priv->v4l2_int_device = v4l2_int_device;
++	priv->client = client;
++	priv->pdata = client->dev.platform_data;
+ 
+-	ret = mt9t112_camera_probe(icd, client);
++	i2c_set_clientdata(client, priv);
++
++	//ret = mt9t112_detect(client);
++
++	ret = v4l2_int_device_register(priv->v4l2_int_device);
+ 	if (ret) {
+-		icd->ops = NULL;
+ 		i2c_set_clientdata(client, NULL);
++		kfree(v4l2_int_device);
+ 		kfree(priv);
+ 	}
+ 
+@@ -1128,11 +1211,12 @@ static int mt9t112_probe(struct i2c_client *client,
+ 
+ static int mt9t112_remove(struct i2c_client *client)
+ {
+-	struct mt9t112_priv *priv = to_mt9t112(client);
+-	struct soc_camera_device *icd = client->dev.platform_data;
++	struct mt9t112_priv *priv = i2c_get_clientdata(client);
+ 
+-	icd->ops = NULL;
++	v4l2_int_device_unregister(priv->v4l2_int_device);
+ 	i2c_set_clientdata(client, NULL);
++
++	kfree(priv->v4l2_int_device);
+ 	kfree(priv);
+ 	return 0;
+ }
+@@ -1172,6 +1256,6 @@ static void __exit mt9t112_module_exit(void)
+ module_init(mt9t112_module_init);
+ module_exit(mt9t112_module_exit);
+ 
+-MODULE_DESCRIPTION("SoC Camera driver for mt9t112");
++MODULE_DESCRIPTION("mt9t112 sensor driver");
+ MODULE_AUTHOR("Kuninori Morimoto");
+ MODULE_LICENSE("GPL v2");
+diff --git a/include/media/mt9t112.h b/include/media/mt9t112.h
+index a43c74a..62caaf5 100644
+--- a/include/media/mt9t112.h
++++ b/include/media/mt9t112.h
+@@ -11,6 +11,8 @@
+ #ifndef __MT9T112_H__
+ #define __MT9T112_H__
+ 
++#include <media/v4l2-int-device.h>
++
+ #define MT9T112_FLAG_PCLK_RISING_EDGE	(1 << 0)
+ #define MT9T112_FLAG_DATAWIDTH_8	(1 << 1) /* default width is 10 */
+ 
+@@ -27,4 +29,15 @@ struct mt9t112_camera_info {
+ 	struct mt9t112_pll_divider divider;
+ };
+ 
++struct mt9t112_platform_data {
++	char *master;
++	int (*power_set) (struct v4l2_int_device *s, enum v4l2_power on);
++	int (*ifparm) (struct v4l2_ifparm *p);
++	int (*priv_data_set) (void *);
++	/* Interface control params */
++	bool clk_polarity;
++	bool hs_polarity;
++	bool vs_polarity;
++};
++
+ #endif /* __MT9T112_H__ */
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0052-mt9t112-Add-more-info-to-public-header.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0052-mt9t112-Add-more-info-to-public-header.patch
new file mode 100644
index 0000000..22c9c4d
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0052-mt9t112-Add-more-info-to-public-header.patch
@@ -0,0 +1,29 @@
+From 4e0c0d1ec79c097bb2e580f186a89963b9e35d8c Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Thu, 1 Jul 2010 07:33:49 -0500
+Subject: [PATCH 52/75] mt9t112: Add more info to public header
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ include/media/mt9t112.h |    5 +++++
+ 1 files changed, 5 insertions(+), 0 deletions(-)
+
+diff --git a/include/media/mt9t112.h b/include/media/mt9t112.h
+index 62caaf5..49fa042 100644
+--- a/include/media/mt9t112.h
++++ b/include/media/mt9t112.h
+@@ -13,6 +13,11 @@
+ 
+ #include <media/v4l2-int-device.h>
+ 
++#define MT9T112_I2C_ADDR		(0x78 >> 1)
++
++#define MT9T112_CLK_MAX			(54000000) /* 54MHz */
++#define MT9T112_CLK_MIN			(6000000)  /* 6Mhz */
++
+ #define MT9T112_FLAG_PCLK_RISING_EDGE	(1 << 0)
+ #define MT9T112_FLAG_DATAWIDTH_8	(1 << 1) /* default width is 10 */
+ 
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0053-mt9t112-Fix-null-pointer-kernel-bug.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0053-mt9t112-Fix-null-pointer-kernel-bug.patch
new file mode 100644
index 0000000..b24638f
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0053-mt9t112-Fix-null-pointer-kernel-bug.patch
@@ -0,0 +1,84 @@
+From 8ef0425ef8bc0d228e03666cf7d0af564882fcef Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Thu, 1 Jul 2010 09:12:37 -0500
+Subject: [PATCH 53/75] mt9t112: Fix null pointer kernel bug
+
+We were trying to access a null pointer (info) which we weren't
+initializing anywhere.
+
+Fix this.
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ drivers/media/video/mt9t112.c |   34 +++++++++++++++++++++++-----------
+ 1 files changed, 23 insertions(+), 11 deletions(-)
+
+diff --git a/drivers/media/video/mt9t112.c b/drivers/media/video/mt9t112.c
+index 6f54394..98a4ea9 100644
+--- a/drivers/media/video/mt9t112.c
++++ b/drivers/media/video/mt9t112.c
+@@ -92,7 +92,7 @@ struct mt9t112_frame_size {
+ struct mt9t112_priv {
+ 	struct mt9t112_platform_data	*pdata;
+ 	struct v4l2_int_device		*v4l2_int_device;
+-	struct mt9t112_camera_info	*info;
++	struct mt9t112_camera_info	info;
+ 	struct i2c_client		*client;
+ 	struct v4l2_pix_format		 pix;
+ 	int				 model;
+@@ -463,15 +463,15 @@ static int mt9t112_init_pll(const struct i2c_client *client)
+ 
+ 	/* Replace these registers when new timing parameters are generated */
+ 	mt9t112_set_pll_dividers(client,
+-				 priv->info->divider.m,
+-				 priv->info->divider.n,
+-				 priv->info->divider.p1,
+-				 priv->info->divider.p2,
+-				 priv->info->divider.p3,
+-				 priv->info->divider.p4,
+-				 priv->info->divider.p5,
+-				 priv->info->divider.p6,
+-				 priv->info->divider.p7);
++				 priv->info.divider.m,
++				 priv->info.divider.n,
++				 priv->info.divider.p1,
++				 priv->info.divider.p2,
++				 priv->info.divider.p3,
++				 priv->info.divider.p4,
++				 priv->info.divider.p5,
++				 priv->info.divider.p6,
++				 priv->info.divider.p7);
+ 
+ 	/*
+ 	 * TEST_BYPASS  on
+@@ -1015,7 +1015,7 @@ static int mt9t112_v4l2_int_s_power(struct v4l2_int_device *s,
+ 		}
+ 		if (!(priv->flags & INIT_DONE)) {
+ 			u16 param = (MT9T112_FLAG_PCLK_RISING_EDGE &
+-				     priv->info->flags) ? 0x0001 : 0x0000;
++				     priv->info.flags) ? 0x0001 : 0x0000;
+ 
+ 			ECHECKER(ret, mt9t112_detect(client));
+ 			ECHECKER(ret, mt9t112_init_camera(client));
+@@ -1195,6 +1195,18 @@ static int mt9t112_probe(struct i2c_client *client,
+ 	priv->client = client;
+ 	priv->pdata = client->dev.platform_data;
+ 
++	/* Revisit: Init Sensor info settings */
++	priv->info.divider.m = 25;
++	priv->info.divider.n = 2;
++	priv->info.divider.p1 = 0;
++	priv->info.divider.p2 = 9;
++	priv->info.divider.p3 = 0;
++	priv->info.divider.p4 = 13;
++	priv->info.divider.p5 = 13;
++	priv->info.divider.p6 = 9;
++	priv->info.divider.p7 = 0;
++	priv->info.flags = MT9T112_FLAG_PCLK_RISING_EDGE;
++
+ 	i2c_set_clientdata(client, priv);
+ 
+ 	//ret = mt9t112_detect(client);
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0054-DEBUG-omap3beagle-Add-MT9T112-to-defconfig.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0054-DEBUG-omap3beagle-Add-MT9T112-to-defconfig.patch
new file mode 100644
index 0000000..ff364bd
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0054-DEBUG-omap3beagle-Add-MT9T112-to-defconfig.patch
@@ -0,0 +1,26 @@
+From b5eb720c7424a1018fd7b76b7bfb3a1e720ab77b Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Thu, 15 Jul 2010 00:55:43 -0500
+Subject: [PATCH 54/75] DEBUG: omap3beagle: Add MT9T112 to defconfig
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ arch/arm/configs/omap3_beagle_cam_defconfig |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/arch/arm/configs/omap3_beagle_cam_defconfig b/arch/arm/configs/omap3_beagle_cam_defconfig
+index 0ea8300..80b64db 100644
+--- a/arch/arm/configs/omap3_beagle_cam_defconfig
++++ b/arch/arm/configs/omap3_beagle_cam_defconfig
+@@ -1737,7 +1737,7 @@ CONFIG_VIDEO_WM8775=m
+ CONFIG_VIDEO_MT9V011=m
+ # CONFIG_VIDEO_TCM825X is not set
+ CONFIG_VIDEO_MT9P012=m
+-CONFIG_VIDEO_MT9T111=y
++CONFIG_VIDEO_MT9T112=y
+ # CONFIG_VIDEO_DW9710 is not set
+ # CONFIG_VIDEO_OV3640 is not set
+ # CONFIG_VIDEO_IMX046 is not set
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0055-omap3beagle-camera-Change-MT9T111-references-to-new-.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0055-omap3beagle-camera-Change-MT9T111-references-to-new-.patch
new file mode 100644
index 0000000..38618cd
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0055-omap3beagle-camera-Change-MT9T111-references-to-new-.patch
@@ -0,0 +1,207 @@
+From ecf53d3104b6b73b1b32a9a5b39af2f258d74f8d Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Thu, 15 Jul 2010 15:47:23 -0500
+Subject: [PATCH 55/75] omap3beagle: camera: Change MT9T111 references to new MT9T112 driver
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ arch/arm/mach-omap2/board-omap3beagle-camera.c |   52 ++++++++++++------------
+ arch/arm/mach-omap2/board-omap3beagle.c        |   12 +++---
+ 2 files changed, 32 insertions(+), 32 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle-camera.c b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+index 2e49158..0b4dff7 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle-camera.c
++++ b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+@@ -203,29 +203,29 @@ struct mt9v113_platform_data mt9v113_pdata = {
+ 
+ #endif				/* #ifdef CONFIG_VIDEO_MT9V113 */
+ 
+-#if defined(CONFIG_VIDEO_MT9T111) || defined(CONFIG_VIDEO_MT9T111_MODULE)
+-#include <media/mt9t111.h>
++#if defined(CONFIG_VIDEO_MT9T112) || defined(CONFIG_VIDEO_MT9T112_MODULE)
++#include <media/mt9t112.h>
+ 
+-#define ISP_MT9T111_MCLK	216000000
++#define ISP_MT9T112_MCLK	216000000
+ 
+ /* Arbitrary memory handling limit */
+-#define MT9T111_BIGGEST_FRAME_BYTE_SIZE	PAGE_ALIGN((2048 * 2) * 1536 * 4)
++#define MT9T112_BIGGEST_FRAME_BYTE_SIZE	PAGE_ALIGN((2048 * 2) * 1536 * 4)
+ 
+-static struct isp_interface_config mt9t111_if_config = {
++static struct isp_interface_config mt9t112_if_config = {
+ 	.ccdc_par_ser		= ISP_PARLL,
+ 	.dataline_shift		= 0x2,
+ 	.hsvs_syncdetect	= ISPCTRL_SYNC_DETECT_VSRISE,
+ 	.strobe			= 0x0,
+ 	.prestrobe		= 0x0,
+ 	.shutter		= 0x0,
+-	.cam_mclk		= ISP_MT9T111_MCLK,
++	.cam_mclk		= ISP_MT9T112_MCLK,
+ 	.wenlog 		= ISPCCDC_CFG_WENLOG_AND,
+ 	.wait_hs_vs		= 2,
+ 	.u.par.par_bridge	= 0x3,
+ 	.u.par.par_clk_pol	= 0x0,
+ };
+ 
+-static struct v4l2_ifparm mt9t111_ifparm_s = {
++static struct v4l2_ifparm mt9t112_ifparm_s = {
+ 	.if_type = V4L2_IF_TYPE_RAW,
+ 	.u 	 = {
+ 		.raw = {
+@@ -235,47 +235,47 @@ static struct v4l2_ifparm mt9t111_ifparm_s = {
+ 			.latch_clk_inv		= 0,
+ 			.nobt_hs_inv		= 0,	/* active high */
+ 			.nobt_vs_inv		= 0,	/* active high */
+-			.clock_min		= MT9T111_CLK_MIN,
+-			.clock_max		= MT9T111_CLK_MAX,
++			.clock_min		= MT9T112_CLK_MIN,
++			.clock_max		= MT9T112_CLK_MAX,
+ 		},
+ 	},
+ };
+ 
+ /**
+- * @brief mt9t111_ifparm - Returns the mt9t111 interface parameters
++ * @brief mt9t112_ifparm - Returns the mt9t112 interface parameters
+  *
+  * @param p - pointer to v4l2_ifparm structure
+  *
+  * @return result of operation - 0 is success
+  */
+-static int mt9t111_ifparm(struct v4l2_ifparm *p)
++static int mt9t112_ifparm(struct v4l2_ifparm *p)
+ {
+ 	if (p == NULL)
+ 		return -EINVAL;
+ 
+-	*p = mt9t111_ifparm_s;
++	*p = mt9t112_ifparm_s;
+ 	return 0;
+ }
+ 
+ #if defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE)
+-static struct omap34xxcam_hw_config mt9t111_hwc = {
++static struct omap34xxcam_hw_config mt9t112_hwc = {
+ 	.dev_index		= 0,
+ 	.dev_minor		= 0,
+ 	.dev_type		= OMAP34XXCAM_SLAVE_SENSOR,
+ 	.u.sensor.sensor_isp	= 0,
+-	.u.sensor.capture_mem	= MT9T111_BIGGEST_FRAME_BYTE_SIZE,
++	.u.sensor.capture_mem	= MT9T112_BIGGEST_FRAME_BYTE_SIZE,
+ 	.u.sensor.ival_default	= { 1, 10 },
+ };
+ #endif
+ 
+ /**
+- * @brief mt9t111_set_prv_data - Returns mt9t111 omap34xx driver private data
++ * @brief mt9t112_set_prv_data - Returns mt9t112 omap34xx driver private data
+  *
+  * @param priv - pointer to omap34xxcam_hw_config structure
+  *
+  * @return result of operation - 0 is success
+  */
+-static int mt9t111_set_prv_data(void *priv)
++static int mt9t112_set_prv_data(void *priv)
+ {
+ #if defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE)
+ 	struct omap34xxcam_hw_config *hwc = priv;
+@@ -283,7 +283,7 @@ static int mt9t111_set_prv_data(void *priv)
+ 	if (priv == NULL)
+ 		return -EINVAL;
+ 
+-	*hwc = mt9t111_hwc;
++	*hwc = mt9t112_hwc;
+ 	return 0;
+ #else
+ 	return -EINVAL;
+@@ -291,13 +291,13 @@ static int mt9t111_set_prv_data(void *priv)
+ }
+ 
+ /**
+- * @brief mt9t111_power_set - Power-on or power-off TVP5146 device
++ * @brief mt9t112_power_set - Power-on or power-off TVP5146 device
+  *
+  * @param power - enum, Power on/off, resume/standby
+  *
+  * @return result of operation - 0 is success
+  */
+-static int mt9t111_power_set(struct v4l2_int_device *s, enum v4l2_power power)
++static int mt9t112_power_set(struct v4l2_int_device *s, enum v4l2_power power)
+ {
+ 	struct omap34xxcam_videodev *vdev = s->u.slave->master->priv;
+ 
+@@ -314,7 +314,7 @@ static int mt9t111_power_set(struct v4l2_int_device *s, enum v4l2_power power)
+ 
+ 	case V4L2_POWER_ON:
+ #if defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE)
+-		isp_configure_interface(vdev->cam->isp, &mt9t111_if_config);
++		isp_configure_interface(vdev->cam->isp, &mt9t112_if_config);
+ #endif
+ 
+ 		/* Set RESET_BAR to 0 */
+@@ -331,7 +331,7 @@ static int mt9t111_power_set(struct v4l2_int_device *s, enum v4l2_power power)
+ 		mdelay(50);
+ 
+ 		/* Enable EXTCLK */
+-		isp_set_xclk(vdev->cam->isp, MT9T111_CLK_MIN, CAM_USE_XCLKA);
++		isp_set_xclk(vdev->cam->isp, MT9T112_CLK_MIN, CAM_USE_XCLKA);
+ 
+ 		/*
+ 		 * Wait at least 70 CLK cycles (w/EXTCLK = 6MHz, or CLK_MIN):
+@@ -359,14 +359,14 @@ static int mt9t111_power_set(struct v4l2_int_device *s, enum v4l2_power power)
+ 	return 0;
+ }
+ 
+-struct mt9t111_platform_data mt9t111_pdata = {
++struct mt9t112_platform_data mt9t112_pdata = {
+ 	.master		= "omap34xxcam",
+-	.power_set	= mt9t111_power_set,
+-	.priv_data_set	= mt9t111_set_prv_data,
+-	.ifparm		= mt9t111_ifparm,
++	.power_set	= mt9t112_power_set,
++	.priv_data_set	= mt9t112_set_prv_data,
++	.ifparm		= mt9t112_ifparm,
+ };
+ 
+-#endif				/* #ifdef CONFIG_VIDEO_MT9T111 */
++#endif				/* #ifdef CONFIG_VIDEO_MT9T112 */
+ 
+ static int beagle_cam_probe(struct platform_device *pdev)
+ {
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index 239bd44..f93616b 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -77,10 +77,10 @@ static struct omap_opp * _omap37x_l3_rate_table         = NULL;
+ extern struct mt9v113_platform_data mt9v113_pdata;
+ #endif
+ 
+-#if defined(CONFIG_VIDEO_MT9T111) || defined(CONFIG_VIDEO_MT9T111_MODULE)
++#if defined(CONFIG_VIDEO_MT9T112) || defined(CONFIG_VIDEO_MT9T112_MODULE)
+ #include <media/v4l2-int-device.h>
+-#include <media/mt9t111.h>
+-extern struct mt9t111_platform_data mt9t111_pdata;
++#include <media/mt9t112.h>
++extern struct mt9t112_platform_data mt9t112_pdata;
+ #endif
+ 
+ #define GPMC_CS0_BASE  0x60
+@@ -602,10 +602,10 @@ static struct i2c_board_info __initdata beagle_i2c2_boardinfo[] = {
+ 		.platform_data	= &mt9v113_pdata,
+ 	},
+ #endif
+-#if defined(CONFIG_VIDEO_MT9T111) || defined(CONFIG_VIDEO_MT9T111_MODULE)
++#if defined(CONFIG_VIDEO_MT9T112) || defined(CONFIG_VIDEO_MT9T112_MODULE)
+ 	{
+-		I2C_BOARD_INFO("mt9t111", MT9T111_I2C_ADDR),
+-		.platform_data	= &mt9t111_pdata,
++		I2C_BOARD_INFO("mt9t112", MT9T112_I2C_ADDR),
++		.platform_data	= &mt9t112_pdata,
+ 	},
+ #endif
+ };
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0056-omap34xxcam-Fix-multi-pixel-format-negotiation.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0056-omap34xxcam-Fix-multi-pixel-format-negotiation.patch
new file mode 100644
index 0000000..8040b32
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0056-omap34xxcam-Fix-multi-pixel-format-negotiation.patch
@@ -0,0 +1,26 @@
+From bfca10fcff055b53728881c4c443f18e1387c722 Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Thu, 1 Jul 2010 13:57:26 -0500
+Subject: [PATCH 56/75] omap34xxcam: Fix multi pixel format negotiation
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ drivers/media/video/omap34xxcam.c |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/drivers/media/video/omap34xxcam.c b/drivers/media/video/omap34xxcam.c
+index 2e8153b..051c6a7 100644
+--- a/drivers/media/video/omap34xxcam.c
++++ b/drivers/media/video/omap34xxcam.c
+@@ -544,7 +544,7 @@ static int try_pix_parm(struct omap34xxcam_videodev *vdev,
+ 				pix_tmp_out.height = pix_tmp_in.height;
+ 			rval = isp_try_fmt_cap(isp, &pix_tmp_in, &pix_tmp_out);
+ 			if (rval)
+-				return rval;
++				break;
+ 
+ 			dev_dbg(&vdev->vfd->dev, "this w %d\th %d\tfmt %8.8x\t"
+ 				"-> w %d\th %d\t fmt %8.8x"
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0057-SQUASH-omap3beagle-camera-Bring-back-mt9t111-support.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0057-SQUASH-omap3beagle-camera-Bring-back-mt9t111-support.patch
new file mode 100644
index 0000000..8161406
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0057-SQUASH-omap3beagle-camera-Bring-back-mt9t111-support.patch
@@ -0,0 +1,43 @@
+From 42caf665931e5f86e514fcf5e011daff395836c2 Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Thu, 15 Jul 2010 17:53:07 -0500
+Subject: [PATCH 57/75] SQUASH: omap3beagle: camera: Bring back mt9t111 support
+
+---
+ arch/arm/mach-omap2/board-omap3beagle-camera.c |    8 ++++----
+ 1 files changed, 4 insertions(+), 4 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle-camera.c b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+index 0b4dff7..3118026 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle-camera.c
++++ b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+@@ -221,14 +221,14 @@ static struct isp_interface_config mt9t112_if_config = {
+ 	.cam_mclk		= ISP_MT9T112_MCLK,
+ 	.wenlog 		= ISPCCDC_CFG_WENLOG_AND,
+ 	.wait_hs_vs		= 2,
+-	.u.par.par_bridge	= 0x3,
++	.u.par.par_bridge	= 0x2,
+ 	.u.par.par_clk_pol	= 0x0,
+ };
+ 
+ static struct v4l2_ifparm mt9t112_ifparm_s = {
+-	.if_type = V4L2_IF_TYPE_RAW,
++	.if_type = V4L2_IF_TYPE_YCbCr,
+ 	.u 	 = {
+-		.raw = {
++		.ycbcr = {
+ 			.frame_start_on_rising_vs = 1,
+ 			.bt_sync_correct	= 0,
+ 			.swap			= 0,
+@@ -262,7 +262,7 @@ static struct omap34xxcam_hw_config mt9t112_hwc = {
+ 	.dev_index		= 0,
+ 	.dev_minor		= 0,
+ 	.dev_type		= OMAP34XXCAM_SLAVE_SENSOR,
+-	.u.sensor.sensor_isp	= 0,
++	.u.sensor.sensor_isp	= 1,
+ 	.u.sensor.capture_mem	= MT9T112_BIGGEST_FRAME_BYTE_SIZE,
+ 	.u.sensor.ival_default	= { 1, 10 },
+ };
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0058-mt9t112-Do-init_camera-every-powerup.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0058-mt9t112-Do-init_camera-every-powerup.patch
new file mode 100644
index 0000000..a0cf68d
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0058-mt9t112-Do-init_camera-every-powerup.patch
@@ -0,0 +1,57 @@
+From a9afe5db3c54dc9dcc1025d493afe854a6e86914 Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Thu, 15 Jul 2010 17:53:44 -0500
+Subject: [PATCH 58/75] mt9t112: Do init_camera every powerup
+
+This is because we want to ensure we always come from a known state.
+
+Probably this could be revisited later for optimization.
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ drivers/media/video/mt9t112.c |   17 ++++++++---------
+ 1 files changed, 8 insertions(+), 9 deletions(-)
+
+diff --git a/drivers/media/video/mt9t112.c b/drivers/media/video/mt9t112.c
+index 98a4ea9..eebc2b5 100644
+--- a/drivers/media/video/mt9t112.c
++++ b/drivers/media/video/mt9t112.c
+@@ -982,6 +982,8 @@ static int mt9t112_v4l2_int_s_power(struct v4l2_int_device *s,
+ {
+ 	struct mt9t112_priv *priv = s->priv;
+ 	struct i2c_client *client = priv->client;
++	u16 param = (MT9T112_FLAG_PCLK_RISING_EDGE &
++		     priv->info.flags) ? 0x0001 : 0x0000;
+ 	int ret;
+ 
+ 	switch (power) {
+@@ -1014,20 +1016,17 @@ static int mt9t112_v4l2_int_s_power(struct v4l2_int_device *s,
+ 			return ret;
+ 		}
+ 		if (!(priv->flags & INIT_DONE)) {
+-			u16 param = (MT9T112_FLAG_PCLK_RISING_EDGE &
+-				     priv->info.flags) ? 0x0001 : 0x0000;
+-
+ 			ECHECKER(ret, mt9t112_detect(client));
+-			ECHECKER(ret, mt9t112_init_camera(client));
+-
+-			/* Invert PCLK (Data sampled on falling edge of pixclk) */
+-			mt9t112_reg_write(ret, client, 0x3C20, param);
+-
+-			mdelay(5);
+ 
+ 			priv->flags |= INIT_DONE;
+ 		}
+ 
++		ECHECKER(ret, mt9t112_init_camera(client));
++
++		/* Invert PCLK (Data sampled on falling edge of pixclk) */
++		mt9t112_reg_write(ret, client, 0x3C20, param);
++
++		mdelay(5);
+ 		mt9t112_mcu_write(ret, client, VAR(26, 7),
+ 				  mt9t112_pixfmt_to_fmt(priv->pix.pixelformat));
+ 		mt9t112_mcu_write(ret, client, VAR(26, 9),
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0059-omap3beagle-camera-Switch-flag-for-no-sensor-ISP.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0059-omap3beagle-camera-Switch-flag-for-no-sensor-ISP.patch
new file mode 100644
index 0000000..c273035
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0059-omap3beagle-camera-Switch-flag-for-no-sensor-ISP.patch
@@ -0,0 +1,26 @@
+From 86ecf1214056406f84852a9863b2e0f4cd64c52c Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Thu, 15 Jul 2010 18:15:32 -0500
+Subject: [PATCH 59/75] omap3beagle: camera: Switch flag for no sensor ISP
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ arch/arm/mach-omap2/board-omap3beagle-camera.c |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle-camera.c b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+index 3118026..75622bf 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle-camera.c
++++ b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+@@ -262,7 +262,7 @@ static struct omap34xxcam_hw_config mt9t112_hwc = {
+ 	.dev_index		= 0,
+ 	.dev_minor		= 0,
+ 	.dev_type		= OMAP34XXCAM_SLAVE_SENSOR,
+-	.u.sensor.sensor_isp	= 1,
++	.u.sensor.sensor_isp	= 0,
+ 	.u.sensor.capture_mem	= MT9T112_BIGGEST_FRAME_BYTE_SIZE,
+ 	.u.sensor.ival_default	= { 1, 10 },
+ };
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0060-mt9t112-Add-back-3MP-basesize.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0060-mt9t112-Add-back-3MP-basesize.patch
new file mode 100644
index 0000000..e7b7403
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0060-mt9t112-Add-back-3MP-basesize.patch
@@ -0,0 +1,37 @@
+From 022aa1373b5bfb77bc90f9e1abb485e0717f28c2 Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Thu, 15 Jul 2010 18:33:00 -0500
+Subject: [PATCH 60/75] mt9t112: Add back 3MP basesize
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ drivers/media/video/mt9t112.c |    6 +++---
+ 1 files changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/media/video/mt9t112.c b/drivers/media/video/mt9t112.c
+index eebc2b5..46d1bd6 100644
+--- a/drivers/media/video/mt9t112.c
++++ b/drivers/media/video/mt9t112.c
+@@ -41,8 +41,8 @@
+ /*
+  * frame size
+  */
+-#define MAX_WIDTH   640 /* 2048 */
+-#define MAX_HEIGHT  480 /* 1536 */
++#define MAX_WIDTH   2048
++#define MAX_HEIGHT  1536
+ 
+ #define VGA_WIDTH   640
+ #define VGA_HEIGHT  480
+@@ -133,7 +133,7 @@ const static struct v4l2_fmtdesc mt9t112_formats[] = {
+ ************************************************************************/
+ const static struct mt9t112_frame_size mt9t112_sizes[] = {
+ 	{  640, 480 },
+-	/* { 2048, 1536} */
++	{ 2048, 1536}
+ };
+ 
+ /************************************************************************
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0061-mt9t112-Prepare-for-24MHz-EXTCLK-and-30-fps.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0061-mt9t112-Prepare-for-24MHz-EXTCLK-and-30-fps.patch
new file mode 100644
index 0000000..6f47dd9
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0061-mt9t112-Prepare-for-24MHz-EXTCLK-and-30-fps.patch
@@ -0,0 +1,63 @@
+From aabf8386a23795f73722bf74901bd8aa46ebe1ba Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Thu, 15 Jul 2010 23:41:32 -0500
+Subject: [PATCH 61/75] mt9t112: Prepare for 24MHz EXTCLK and 30 fps
+
+Set Aptina recommended values to get 30 FPS with VGA, which
+are achievable given the new PLL divider settings, considering
+an input of 24MHz in the master clock.
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ drivers/media/video/mt9t112.c |   18 +++++++++---------
+ 1 files changed, 9 insertions(+), 9 deletions(-)
+
+diff --git a/drivers/media/video/mt9t112.c b/drivers/media/video/mt9t112.c
+index 46d1bd6..44234e4 100644
+--- a/drivers/media/video/mt9t112.c
++++ b/drivers/media/video/mt9t112.c
+@@ -144,7 +144,7 @@ const static struct mt9t112_frame_size mt9t112_sizes[] = {
+ 
+ ************************************************************************/
+ const struct v4l2_fract mt9t112_frameintervals[] = {
+-	{  .numerator = 1, .denominator = 10 }
++	{  .numerator = 1, .denominator = 30 }
+ };
+ 
+ /************************************************************************
+@@ -932,9 +932,9 @@ static int mt9t112_v4l2_int_g_parm(struct v4l2_int_device *s,
+ 	a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ 
+ 	cparm->capability = V4L2_CAP_TIMEPERFRAME;
+-	/* FIXME: Is 10 fps really the only option? */
++	/* FIXME: Is 30 fps really the only option? */
+ 	cparm->timeperframe.numerator = 1;
+-	cparm->timeperframe.denominator = 10;
++	cparm->timeperframe.denominator = 30;
+ 
+ 	return 0;
+ }
+@@ -1195,14 +1195,14 @@ static int mt9t112_probe(struct i2c_client *client,
+ 	priv->pdata = client->dev.platform_data;
+ 
+ 	/* Revisit: Init Sensor info settings */
+-	priv->info.divider.m = 25;
+-	priv->info.divider.n = 2;
++	priv->info.divider.m = 24;
++	priv->info.divider.n = 1;
+ 	priv->info.divider.p1 = 0;
+-	priv->info.divider.p2 = 9;
++	priv->info.divider.p2 = 8;
+ 	priv->info.divider.p3 = 0;
+-	priv->info.divider.p4 = 13;
+-	priv->info.divider.p5 = 13;
+-	priv->info.divider.p6 = 9;
++	priv->info.divider.p4 = 11;
++	priv->info.divider.p5 = 11;
++	priv->info.divider.p6 = 8;
+ 	priv->info.divider.p7 = 0;
+ 	priv->info.flags = MT9T112_FLAG_PCLK_RISING_EDGE;
+ 
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0062-omap3beagle-camera-Prepare-24MHz-xclk-for-mt9t112.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0062-omap3beagle-camera-Prepare-24MHz-xclk-for-mt9t112.patch
new file mode 100644
index 0000000..0d5a047
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0062-omap3beagle-camera-Prepare-24MHz-xclk-for-mt9t112.patch
@@ -0,0 +1,62 @@
+From 00cd18c8b6bd6b7f6c627d2b1284ca8f98f1fda4 Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Thu, 15 Jul 2010 23:43:20 -0500
+Subject: [PATCH 62/75] omap3beagle: camera: Prepare 24MHz xclk for mt9t112
+
+Adjust calculations of timings based on # of EXTCLK cycles.
+
+Also, set default requested framerate to 30 fps.
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ arch/arm/mach-omap2/board-omap3beagle-camera.c |   16 ++++++++--------
+ 1 files changed, 8 insertions(+), 8 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle-camera.c b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+index 75622bf..520e1d8 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle-camera.c
++++ b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+@@ -264,7 +264,7 @@ static struct omap34xxcam_hw_config mt9t112_hwc = {
+ 	.dev_type		= OMAP34XXCAM_SLAVE_SENSOR,
+ 	.u.sensor.sensor_isp	= 0,
+ 	.u.sensor.capture_mem	= MT9T112_BIGGEST_FRAME_BYTE_SIZE,
+-	.u.sensor.ival_default	= { 1, 10 },
++	.u.sensor.ival_default	= { 1, 30 },
+ };
+ #endif
+ 
+@@ -331,24 +331,24 @@ static int mt9t112_power_set(struct v4l2_int_device *s, enum v4l2_power power)
+ 		mdelay(50);
+ 
+ 		/* Enable EXTCLK */
+-		isp_set_xclk(vdev->cam->isp, MT9T112_CLK_MIN, CAM_USE_XCLKA);
++		isp_set_xclk(vdev->cam->isp, 24000000, CAM_USE_XCLKA);
+ 
+ 		/*
+-		 * Wait at least 70 CLK cycles (w/EXTCLK = 6MHz, or CLK_MIN):
+-		 * ((1000000 * 70) / 6000000) = aprox 12 us.
++		 * Wait at least 70 CLK cycles (w/EXTCLK = 24MHz):
++		 * ((1000000 * 70) / 24000000) = aprox 2.91 us.
+ 		 */
+ 
+-		udelay(12);
++		udelay(3);
+ 
+ 		/* Set RESET_BAR to 1 */
+ 		gpio_set_value(LEOPARD_RESET_GPIO, 1);
+ 
+ 		/*
+-		 * Wait at least 100 CLK cycles (w/EXTCLK = 6MHz, or CLK_MIN):
+-		 * ((1000000 * 100) / 6000000) = aprox 17 us.
++		 * Wait at least 100 CLK cycles (w/EXTCLK = 24MHz):
++		 * ((1000000 * 100) / 24000000) = aprox 4.16 us.
+ 		 */
+ 
+-		udelay(17);
++		udelay(5);
+ 
+ 		break;
+ 
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0063-mt9t112-Correct-register-settings-for-mt9t111-sensor.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0063-mt9t112-Correct-register-settings-for-mt9t111-sensor.patch
new file mode 100644
index 0000000..ad5297f
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0063-mt9t112-Correct-register-settings-for-mt9t111-sensor.patch
@@ -0,0 +1,109 @@
+From 898d1ae2cad72e2b74a0a354b323ba91f2cd4a2a Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Fri, 16 Jul 2010 07:52:06 -0500
+Subject: [PATCH 63/75] mt9t112: Correct register settings for mt9t111 sensor
+
+This now matches with Aptina's recommended values.
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ drivers/media/video/mt9t112.c |   46 ++++++++++++++++++++++++++++------------
+ 1 files changed, 32 insertions(+), 14 deletions(-)
+
+diff --git a/drivers/media/video/mt9t112.c b/drivers/media/video/mt9t112.c
+index 44234e4..ac295dd 100644
+--- a/drivers/media/video/mt9t112.c
++++ b/drivers/media/video/mt9t112.c
+@@ -44,6 +44,9 @@
+ #define MAX_WIDTH   2048
+ #define MAX_HEIGHT  1536
+ 
++#define MAX_WIDTH_PREV   1024
++#define MAX_HEIGHT_PREV  768
++
+ #define VGA_WIDTH   640
+ #define VGA_HEIGHT  480
+ 
+@@ -392,24 +395,39 @@ static int mt9t112_set_a_frame_size(const struct i2c_client *client,
+ 				   u16 height)
+ {
+ 	int ret;
+-	u16 wstart = (MAX_WIDTH - width) / 2;
+-	u16 hstart = (MAX_HEIGHT - height) / 2;
++	u16 wstart, hstart, wend, hend;
++	u16 max_width = MAX_WIDTH_PREV, max_height = MAX_HEIGHT_PREV;
++
++	if ((width > max_width) || (height > max_height)) {
++		/* Capture case */
++		max_width = MAX_WIDTH;
++		max_height = MAX_HEIGHT;
++		hstart = 4;
++		wstart = 4;
++		hend = 1547;
++		wend = 2059;
++	} else {
++		hstart = 0;
++		wstart = 0;
++		hend = 1549;
++		wend = 2061;
++	}
+ 
+ 	/* (Context A) Image Width/Height */
+ 	mt9t112_mcu_write(ret, client, VAR(26, 0), width);
+ 	mt9t112_mcu_write(ret, client, VAR(26, 2), height);
+ 
+ 	/* (Context A) Output Width/Height */
+-	mt9t112_mcu_write(ret, client, VAR(18, 43), 8 + width);
+-	mt9t112_mcu_write(ret, client, VAR(18, 45), 8 + height);
++	mt9t112_mcu_write(ret, client, VAR(18, 43), 8 + max_width);
++	mt9t112_mcu_write(ret, client, VAR(18, 45), 8 + max_height);
+ 
+ 	/* (Context A) Start Row/Column */
+-	mt9t112_mcu_write(ret, client, VAR(18, 2), 4 + hstart);
+-	mt9t112_mcu_write(ret, client, VAR(18, 4), 4 + wstart);
++	mt9t112_mcu_write(ret, client, VAR(18, 2), hstart);
++	mt9t112_mcu_write(ret, client, VAR(18, 4), wstart);
+ 
+ 	/* (Context A) End Row/Column */
+-	mt9t112_mcu_write(ret, client, VAR(18, 6), 11 + height + hstart);
+-	mt9t112_mcu_write(ret, client, VAR(18, 8), 11 + width  + wstart);
++	mt9t112_mcu_write(ret, client, VAR(18, 6), hend);
++	mt9t112_mcu_write(ret, client, VAR(18, 8), wend);
+ 
+ 	mt9t112_mcu_write(ret, client, VAR8(1, 0), 0x06);
+ 
+@@ -547,25 +565,25 @@ static int mt9t112_init_setting(const struct i2c_client *client)
+ 	mt9t112_mcu_mask_set(ret, client, VAR(26, 160), 0x0040, 0x0000);
+ 
+ 	/* Read Mode (A) */
+-	mt9t112_mcu_write(ret, client, VAR(18, 12), 0x0024);
++	mt9t112_mcu_write(ret, client, VAR(18, 12), 0x046C);
+ 
+ 	/* Fine Correction (A) */
+ 	mt9t112_mcu_write(ret, client, VAR(18, 15), 0x00CC);
+ 
+ 	/* Fine IT Min (A) */
+-	mt9t112_mcu_write(ret, client, VAR(18, 17), 0x01f1);
++	mt9t112_mcu_write(ret, client, VAR(18, 17), 0x0381);
+ 
+ 	/* Fine IT Max Margin (A) */
+-	mt9t112_mcu_write(ret, client, VAR(18, 19), 0x00fF);
++	mt9t112_mcu_write(ret, client, VAR(18, 19), 0x024F);
+ 
+ 	/* Base Frame Lines (A) */
+-	mt9t112_mcu_write(ret, client, VAR(18, 29), 0x032D);
++	mt9t112_mcu_write(ret, client, VAR(18, 29), 0x0378);
+ 
+ 	/* Min Line Length (A) */
+-	mt9t112_mcu_write(ret, client, VAR(18, 31), 0x073a);
++	mt9t112_mcu_write(ret, client, VAR(18, 31), 0x05D0);
+ 
+ 	/* Line Length (A) */
+-	mt9t112_mcu_write(ret, client, VAR(18, 37), 0x07d0);
++	mt9t112_mcu_write(ret, client, VAR(18, 37), 0x07AC);
+ 
+ 	/* Adaptive Output Clock (B) */
+ 	mt9t112_mcu_mask_set(ret, client, VAR(27, 160), 0x0040, 0x0000);
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0064-mt9t112-Remove-smart-size-selection.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0064-mt9t112-Remove-smart-size-selection.patch
new file mode 100644
index 0000000..a39eeba
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0064-mt9t112-Remove-smart-size-selection.patch
@@ -0,0 +1,188 @@
+From f6b91f473fe590e80eff6fd16e6fbcc15ce12b9a Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Fri, 16 Jul 2010 17:09:10 -0500
+Subject: [PATCH 64/75] mt9t112: Remove "smart" size selection
+
+This code is broken, as it doesn't really adjust all other
+settings, but output size to desired size. It isn't really
+toggling everything that needs, and giving the false impression
+of good size flexibility.
+
+So, meanwhile, let's put fixed init settings for the contexts,
+and toggle between them (implemented in other patch).
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ drivers/media/video/mt9t112.c |  105 ++++++++++++++++-------------------------
+ 1 files changed, 41 insertions(+), 64 deletions(-)
+
+diff --git a/drivers/media/video/mt9t112.c b/drivers/media/video/mt9t112.c
+index ac295dd..ee991ef 100644
+--- a/drivers/media/video/mt9t112.c
++++ b/drivers/media/video/mt9t112.c
+@@ -390,50 +390,6 @@ static void mt9t112_frame_check(u32 *width, u32 *height)
+ 		*height = MAX_HEIGHT;
+ }
+ 
+-static int mt9t112_set_a_frame_size(const struct i2c_client *client,
+-				   u16 width,
+-				   u16 height)
+-{
+-	int ret;
+-	u16 wstart, hstart, wend, hend;
+-	u16 max_width = MAX_WIDTH_PREV, max_height = MAX_HEIGHT_PREV;
+-
+-	if ((width > max_width) || (height > max_height)) {
+-		/* Capture case */
+-		max_width = MAX_WIDTH;
+-		max_height = MAX_HEIGHT;
+-		hstart = 4;
+-		wstart = 4;
+-		hend = 1547;
+-		wend = 2059;
+-	} else {
+-		hstart = 0;
+-		wstart = 0;
+-		hend = 1549;
+-		wend = 2061;
+-	}
+-
+-	/* (Context A) Image Width/Height */
+-	mt9t112_mcu_write(ret, client, VAR(26, 0), width);
+-	mt9t112_mcu_write(ret, client, VAR(26, 2), height);
+-
+-	/* (Context A) Output Width/Height */
+-	mt9t112_mcu_write(ret, client, VAR(18, 43), 8 + max_width);
+-	mt9t112_mcu_write(ret, client, VAR(18, 45), 8 + max_height);
+-
+-	/* (Context A) Start Row/Column */
+-	mt9t112_mcu_write(ret, client, VAR(18, 2), hstart);
+-	mt9t112_mcu_write(ret, client, VAR(18, 4), wstart);
+-
+-	/* (Context A) End Row/Column */
+-	mt9t112_mcu_write(ret, client, VAR(18, 6), hend);
+-	mt9t112_mcu_write(ret, client, VAR(18, 8), wend);
+-
+-	mt9t112_mcu_write(ret, client, VAR8(1, 0), 0x06);
+-
+-	return ret;
+-}
+-
+ static int mt9t112_set_pll_dividers(const struct i2c_client *client,
+ 				    u8 m, u8 n,
+ 				    u8 p1, u8 p2, u8 p3,
+@@ -561,9 +517,27 @@ static int mt9t112_init_setting(const struct i2c_client *client)
+ 
+ 	int ret;
+ 
++	/* Output Width (A) */
++	mt9t112_mcu_write(ret, client, VAR(26, 0), 640);
++
++	/* Output Height (A) */
++	mt9t112_mcu_write(ret, client, VAR(26, 2), 480);
++
+ 	/* Adaptive Output Clock (A) */
+ 	mt9t112_mcu_mask_set(ret, client, VAR(26, 160), 0x0040, 0x0000);
+ 
++	/* Row Start (A) */
++	mt9t112_mcu_write(ret, client, VAR(18, 2), 0);
++
++	/* Column Start (A) */
++	mt9t112_mcu_write(ret, client, VAR(18, 4), 0);
++
++	/* Row End (A) */
++	mt9t112_mcu_write(ret, client, VAR(18, 6), 1549);
++
++	/* Column End (A) */
++	mt9t112_mcu_write(ret, client, VAR(18, 8), 2061);
++
+ 	/* Read Mode (A) */
+ 	mt9t112_mcu_write(ret, client, VAR(18, 12), 0x046C);
+ 
+@@ -585,6 +559,18 @@ static int mt9t112_init_setting(const struct i2c_client *client)
+ 	/* Line Length (A) */
+ 	mt9t112_mcu_write(ret, client, VAR(18, 37), 0x07AC);
+ 
++	/* Context Width (A) */
++	mt9t112_mcu_write(ret, client, VAR(18, 43), 8 + 1024);
++
++	/* Context Height (A) */
++	mt9t112_mcu_write(ret, client, VAR(18, 45), 8 + 768);
++
++	/* Output Width (B) */
++	mt9t112_mcu_write(ret, client, VAR(27, 0), 2048);
++
++	/* Output Hieght (B) */
++	mt9t112_mcu_write(ret, client, VAR(27, 2), 1536);
++
+ 	/* Adaptive Output Clock (B) */
+ 	mt9t112_mcu_mask_set(ret, client, VAR(27, 160), 0x0040, 0x0000);
+ 
+@@ -610,13 +596,19 @@ static int mt9t112_init_setting(const struct i2c_client *client)
+ 	mt9t112_mcu_write(ret, client, VAR(18, 91), 0x00FF);
+ 
+ 	/* Base Frame Lines (B) */
+-	mt9t112_mcu_write(ret, client, VAR(18, 101), 0x0668);
++	mt9t112_mcu_write(ret, client, VAR(18, 101), 0x066C);
+ 
+ 	/* Min Line Length (B) */
+-	mt9t112_mcu_write(ret, client, VAR(18, 103), 0x0AF0);
++	mt9t112_mcu_write(ret, client, VAR(18, 103), 0x0378);
+ 
+ 	/* Line Length (B) */
+-	mt9t112_mcu_write(ret, client, VAR(18, 109), 0x0AF0);
++	mt9t112_mcu_write(ret, client, VAR(18, 109), 0x0CB1);
++
++	/* Context Width (B) */
++	mt9t112_mcu_write(ret, client, VAR(18, 115), 8 + 2048);
++
++	/* Context Height (B) */
++	mt9t112_mcu_write(ret, client, VAR(18, 117), 8 + 1536);
+ 
+ 	/*
+ 	 * Flicker Dectection registers
+@@ -692,10 +684,10 @@ static int mt9t112_init_setting(const struct i2c_client *client)
+ 	mt9t112_mcu_write(ret, client, VAR8(8, 12), 0x0A);
+ 
+ 	/* RX FIFO Watermark (A) */
+-	mt9t112_mcu_write(ret, client, VAR(18, 70), 0x0014);
++	mt9t112_mcu_write(ret, client, VAR(18, 70), 0x0080);
+ 
+ 	/* RX FIFO Watermark (B) */
+-	mt9t112_mcu_write(ret, client, VAR(18, 142), 0x0014);
++	mt9t112_mcu_write(ret, client, VAR(18, 142), 0x0080);
+ 
+ 	/* MCLK: 16MHz
+ 	 * PCLK: 73MHz
+@@ -1008,17 +1000,6 @@ static int mt9t112_v4l2_int_s_power(struct v4l2_int_device *s,
+ 	case V4L2_POWER_STANDBY:
+ 		/* FALLTHROUGH */
+ 	case V4L2_POWER_OFF:
+-		/* FIXME
+-		 *
+-		 * If user selected large output size,
+-		 * and used it long time,
+-		 * mt9t112 camera will be very warm.
+-		 *
+-		 * But current driver can not stop mt9t112 camera.
+-		 * So, set small size here to solve this problem.
+-		 */
+-		mt9t112_set_a_frame_size(client, VGA_WIDTH, VGA_HEIGHT);
+-
+ 		ret = priv->pdata->power_set(s, power);
+ 		if (ret < 0) {
+ 			dev_err(&client->dev, "Unable to set target board power "
+@@ -1051,10 +1032,6 @@ static int mt9t112_v4l2_int_s_power(struct v4l2_int_device *s,
+ 				  mt9t112_pixfmt_to_order(priv->pix.pixelformat));
+ 		mt9t112_mcu_write(ret, client, VAR8(1, 0), 0x06);
+ 
+-		mt9t112_set_a_frame_size(client,
+-					 priv->pix.width,
+-					 priv->pix.height);
+-
+ 		ECHECKER(ret, mt9t112_auto_focus_trigger(client));
+ 
+ 		dev_dbg(&client->dev, "format : %d\n", priv->pix.pixelformat);
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0065-rtl8192su-remove-bogus-Kconfig-depend-on-PCI-and-add.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0065-rtl8192su-remove-bogus-Kconfig-depend-on-PCI-and-add.patch
new file mode 100644
index 0000000..0ceb1a5
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0065-rtl8192su-remove-bogus-Kconfig-depend-on-PCI-and-add.patch
@@ -0,0 +1,38 @@
+From 088fc53bfda23acd009213c5ff83f411bf09e307 Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@dominion.thruhere.net>
+Date: Sun, 18 Jul 2010 11:25:12 +0200
+Subject: [PATCH 65/75] rtl8192su: remove bogus Kconfig depend on PCI and add another product ID
+
+Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
+---
+ drivers/staging/rtl8192su/Kconfig       |    2 +-
+ drivers/staging/rtl8192su/r8192U_core.c |    1 +
+ 2 files changed, 2 insertions(+), 1 deletions(-)
+
+diff --git a/drivers/staging/rtl8192su/Kconfig b/drivers/staging/rtl8192su/Kconfig
+index 123fa6d..9888927 100644
+--- a/drivers/staging/rtl8192su/Kconfig
++++ b/drivers/staging/rtl8192su/Kconfig
+@@ -1,6 +1,6 @@
+ config RTL8192SU
+ 	tristate "RealTek RTL8192SU Wireless LAN NIC driver"
+-	depends on PCI && WLAN && USB
++	depends on WLAN && USB
+ 	depends on WIRELESS_EXT
+ 	default N
+ 	---help---
+diff --git a/drivers/staging/rtl8192su/r8192U_core.c b/drivers/staging/rtl8192su/r8192U_core.c
+index 66274d7..48e4c29 100644
+--- a/drivers/staging/rtl8192su/r8192U_core.c
++++ b/drivers/staging/rtl8192su/r8192U_core.c
+@@ -112,6 +112,7 @@ u32 rt_global_debug_component = \
+ 
+ static struct usb_device_id rtl8192_usb_id_tbl[] = {
+ 	/* Realtek */
++	{USB_DEVICE(0x0bda, 0x8171)},
+ 	{USB_DEVICE(0x0bda, 0x8192)},
+ 	{USB_DEVICE(0x0bda, 0x8709)},
+ 	/* Corega */
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0066-mt9t112-Add-Context-selection-to-configuration.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0066-mt9t112-Add-Context-selection-to-configuration.patch
new file mode 100644
index 0000000..f797f1e
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0066-mt9t112-Add-Context-selection-to-configuration.patch
@@ -0,0 +1,96 @@
+From c085125afaa6641b5db8e88f227eb4141ed6d59c Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Sun, 18 Jul 2010 01:12:41 -0500
+Subject: [PATCH 66/75] mt9t112: Add Context selection to configuration
+
+Thsi makes always start at least with preview mode
+(context A), and then, if needed, transition to capture
+mode (context B)
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ drivers/media/video/mt9t112.c |   54 +++++++++++++++++++++++++++++++++++++++++
+ 1 files changed, 54 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/media/video/mt9t112.c b/drivers/media/video/mt9t112.c
+index ee991ef..ec7514f 100644
+--- a/drivers/media/video/mt9t112.c
++++ b/drivers/media/video/mt9t112.c
+@@ -73,6 +73,9 @@
+ #define mt9t112_reg_read(ret, client, a) \
+ 	ECHECKER(ret, __mt9t112_reg_read(client, a))
+ 
++#define mt9t112_mcu_read(ret, client, a) \
++	ECHECKER(ret, __mt9t112_mcu_read(client, a))
++
+ /*
+  * Logical address
+  */
+@@ -737,6 +740,50 @@ static int mt9t112_auto_focus_trigger(const struct i2c_client *client)
+ 	return ret;
+ }
+ 
++static int mt9t112_goto_preview(const struct i2c_client *client)
++{
++	int ret, trycount = 0;
++
++	/* Is it already in preview mode? */
++	mt9t112_mcu_read(ret, client, VAR8(1, 1));
++	if (ret == 0x3)
++		return 0;
++
++	/* Go to preview mode */
++	mt9t112_mcu_write(ret, client, VAR8(1, 0), 1);
++	do {
++		mt9t112_mcu_read(ret, client, VAR8(1, 1));
++		mdelay(1);
++	} while ((ret != 0x3) && (++trycount < 100));
++
++	if (trycount >= 100)
++		return -EBUSY;
++
++	return 0;
++}
++
++static int mt9t112_goto_capture(const struct i2c_client *client)
++{
++	int ret, trycount = 0;
++
++	/* Is it already in capture mode? */
++	mt9t112_mcu_read(ret, client, VAR8(1, 1));
++	if (ret == 0x7)
++		return 0;
++
++	/* Go to capture mode */
++	mt9t112_mcu_write(ret, client, VAR8(1, 0), 2);
++	do {
++		mt9t112_mcu_read(ret, client, VAR8(1, 1));
++		mdelay(1);
++	} while ((ret != 0x7) && (++trycount < 100));
++
++	if (trycount >= 100)
++		return -EBUSY;
++
++	return 0;
++}
++
+ static int mt9t112_init_camera(const struct i2c_client *client)
+ {
+ 	int ret;
+@@ -1034,6 +1081,13 @@ static int mt9t112_v4l2_int_s_power(struct v4l2_int_device *s,
+ 
+ 		ECHECKER(ret, mt9t112_auto_focus_trigger(client));
+ 
++		ECHECKER(ret, mt9t112_goto_preview(client));
++
++		if ((priv->pix.width == MAX_WIDTH) &&
++		    (priv->pix.height == MAX_HEIGHT)) {
++			ECHECKER(ret, mt9t112_goto_capture(client));
++		}
++
+ 		dev_dbg(&client->dev, "format : %d\n", priv->pix.pixelformat);
+ 		dev_dbg(&client->dev, "size   : %d x %d\n",
+ 			priv->pix.width,
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0067-mt9t112-Disable-JPEG-in-Context-B.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0067-mt9t112-Disable-JPEG-in-Context-B.patch
new file mode 100644
index 0000000..060764e
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0067-mt9t112-Disable-JPEG-in-Context-B.patch
@@ -0,0 +1,32 @@
+From 4fd52aac9743364e805cb3b4d1c9e8cb53a434a5 Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Sun, 18 Jul 2010 01:45:29 -0500
+Subject: [PATCH 67/75] mt9t112: Disable JPEG in Context B
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ drivers/media/video/mt9t112.c |    8 --------
+ 1 files changed, 0 insertions(+), 8 deletions(-)
+
+diff --git a/drivers/media/video/mt9t112.c b/drivers/media/video/mt9t112.c
+index ec7514f..18d7ce5 100644
+--- a/drivers/media/video/mt9t112.c
++++ b/drivers/media/video/mt9t112.c
+@@ -812,14 +812,6 @@ static int mt9t112_init_camera(const struct i2c_client *client)
+ 	mt9t112_mcu_write(ret, client, VAR(26, 160), 0x0A2E);
+ 	mt9t112_mcu_write(ret, client, VAR(27, 160), 0x0A2E);
+ 
+-	/* Configure STatus in Status_before_length Format and enable header */
+-	/* PRI_B_CONFIG_JPEG_OB_TX_CONTROL_VAR */
+-	mt9t112_mcu_write(ret, client, VAR(27, 144), 0x0CB4);
+-
+-	/* Enable JPEG in context B */
+-	/* PRI_B_CONFIG_JPEG_OB_TX_CONTROL_VAR */
+-	mt9t112_mcu_write(ret, client, VAR8(27, 142), 0x01);
+-
+ 	/* Disable Dac_TXLO */
+ 	mt9t112_reg_write(ret, client, 0x316C, 0x350F);
+ 
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0068-mt9t112-Make-context-B-stream-unlimited-frames.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0068-mt9t112-Make-context-B-stream-unlimited-frames.patch
new file mode 100644
index 0000000..f630d2e
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0068-mt9t112-Make-context-B-stream-unlimited-frames.patch
@@ -0,0 +1,30 @@
+From c8f30b77094542bca32a3c900e6afc4d9d4d7a74 Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Sun, 18 Jul 2010 01:47:41 -0500
+Subject: [PATCH 68/75] mt9t112: Make context B stream unlimited frames
+
+Context A does this by default, so, only context B needs
+to be configured like this.
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ drivers/media/video/mt9t112.c |    3 +++
+ 1 files changed, 3 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/media/video/mt9t112.c b/drivers/media/video/mt9t112.c
+index 18d7ce5..3c516b4 100644
+--- a/drivers/media/video/mt9t112.c
++++ b/drivers/media/video/mt9t112.c
+@@ -771,6 +771,9 @@ static int mt9t112_goto_capture(const struct i2c_client *client)
+ 	if (ret == 0x7)
+ 		return 0;
+ 
++	/* Num Frames Run (B) */
++	mt9t112_mcu_write(ret, client, VAR(27, 5), 0);
++
+ 	/* Go to capture mode */
+ 	mt9t112_mcu_write(ret, client, VAR8(1, 0), 2);
+ 	do {
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0069-mt9t112-Fix-pll-p-dividers-abstraction.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0069-mt9t112-Fix-pll-p-dividers-abstraction.patch
new file mode 100644
index 0000000..8b99319
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0069-mt9t112-Fix-pll-p-dividers-abstraction.patch
@@ -0,0 +1,58 @@
+From 9c37d9acd3f7909cb1f4e437e0b5fe31dd6214d6 Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Mon, 19 Jul 2010 12:31:47 -0500
+Subject: [PATCH 69/75] mt9t112: Fix pll p-dividers abstraction
+
+Previously, it wasn't clear that the values needed to be filled
+were (val - 1). Fix that.
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ drivers/media/video/mt9t112.c |   16 +++++++++-------
+ 1 files changed, 9 insertions(+), 7 deletions(-)
+
+diff --git a/drivers/media/video/mt9t112.c b/drivers/media/video/mt9t112.c
+index 3c516b4..c1a9b41 100644
+--- a/drivers/media/video/mt9t112.c
++++ b/drivers/media/video/mt9t112.c
+@@ -393,6 +393,8 @@ static void mt9t112_frame_check(u32 *width, u32 *height)
+ 		*height = MAX_HEIGHT;
+ }
+ 
++#define PLL_ADJ(x)	((x != 0) ? x - 1 : 0)
++
+ static int mt9t112_set_pll_dividers(const struct i2c_client *client,
+ 				    u8 m, u8 n,
+ 				    u8 p1, u8 p2, u8 p3,
+@@ -408,21 +410,21 @@ static int mt9t112_set_pll_dividers(const struct i2c_client *client,
+ 	mt9t112_reg_mask_set(ret, client, 0x0010, 0x3fff, val);
+ 
+ 	/* P1/P2/P3 */
+-	val = ((p3 & 0x0F) << 8) |
+-	      ((p2 & 0x0F) << 4) |
+-	      ((p1 & 0x0F) << 0);
++	val = ((PLL_ADJ(p3) & 0x0F) << 8) |
++	      ((PLL_ADJ(p2) & 0x0F) << 4) |
++	      ((PLL_ADJ(p1) & 0x0F) << 0);
+ 	mt9t112_reg_mask_set(ret, client, 0x0012, 0x0fff, val);
+ 
+ 	/* P4/P5/P6 */
+ 	val = (0x7         << 12) |
+-	      ((p6 & 0x0F) <<  8) |
+-	      ((p5 & 0x0F) <<  4) |
+-	      ((p4 & 0x0F) <<  0);
++	      ((PLL_ADJ(p6) & 0x0F) <<  8) |
++	      ((PLL_ADJ(p5) & 0x0F) <<  4) |
++	      ((PLL_ADJ(p4) & 0x0F) <<  0);
+ 	mt9t112_reg_mask_set(ret, client, 0x002A, 0x7fff, val);
+ 
+ 	/* P7 */
+ 	val = (0x1         << 12) |
+-	      ((p7 & 0x0F) <<  0);
++	      ((PLL_ADJ(p7) & 0x0F) <<  0);
+ 	mt9t112_reg_mask_set(ret, client, 0x002C, 0x100f, val);
+ 
+ 	return ret;
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0070-mt9t112-Adjust-50-60Hz-flickering-settings.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0070-mt9t112-Adjust-50-60Hz-flickering-settings.patch
new file mode 100644
index 0000000..593b29b
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0070-mt9t112-Adjust-50-60Hz-flickering-settings.patch
@@ -0,0 +1,51 @@
+From 3768ad7fb5304b05ee2184ba929a9896a3f8212a Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Mon, 19 Jul 2010 17:30:29 -0500
+Subject: [PATCH 70/75] mt9t112: Adjust 50/60Hz flickering settings
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ drivers/media/video/mt9t112.c |   24 ++++++++++++++----------
+ 1 files changed, 14 insertions(+), 10 deletions(-)
+
+diff --git a/drivers/media/video/mt9t112.c b/drivers/media/video/mt9t112.c
+index c1a9b41..8528417 100644
+--- a/drivers/media/video/mt9t112.c
++++ b/drivers/media/video/mt9t112.c
+@@ -694,19 +694,23 @@ static int mt9t112_init_setting(const struct i2c_client *client)
+ 	/* RX FIFO Watermark (B) */
+ 	mt9t112_mcu_write(ret, client, VAR(18, 142), 0x0080);
+ 
+-	/* MCLK: 16MHz
++	/* MCLK: 24MHz
+ 	 * PCLK: 73MHz
+ 	 * CorePixCLK: 36.5 MHz
+ 	 */
+-	mt9t112_mcu_write(ret, client, VAR8(18, 0x0044), 133);
+-	mt9t112_mcu_write(ret, client, VAR8(18, 0x0045), 110);
+-	mt9t112_mcu_write(ret, client, VAR8(18, 0x008c), 130);
+-	mt9t112_mcu_write(ret, client, VAR8(18, 0x008d), 108);
+-
+-	mt9t112_mcu_write(ret, client, VAR8(18, 0x00A5), 27);
+-	mt9t112_mcu_write(ret, client, VAR8(18, 0x00a6), 30);
+-	mt9t112_mcu_write(ret, client, VAR8(18, 0x00a7), 32);
+-	mt9t112_mcu_write(ret, client, VAR8(18, 0x00a8), 35);
++	mt9t112_mcu_write(ret, client, VAR8(18, 0x0044), 11);
++	mt9t112_mcu_write(ret, client, VAR8(18, 0x012F), 1);
++	mt9t112_mcu_write(ret, client, VAR8(18, 0x0045), 222);
++	mt9t112_mcu_write(ret, client, VAR8(18, 0x012D), 0);
++	mt9t112_mcu_write(ret, client, VAR8(18, 0x008c), 161);
++	mt9t112_mcu_write(ret, client, VAR8(18, 0x0130), 0);
++	mt9t112_mcu_write(ret, client, VAR8(18, 0x008d), 134);
++	mt9t112_mcu_write(ret, client, VAR8(18, 0x012E), 0);
++
++	mt9t112_mcu_write(ret, client, VAR8(18, 0x00A5), 36);
++	mt9t112_mcu_write(ret, client, VAR8(18, 0x00a6), 38);
++	mt9t112_mcu_write(ret, client, VAR8(18, 0x00a7), 43);
++	mt9t112_mcu_write(ret, client, VAR8(18, 0x00a8), 45);
+ 
+ 	return ret;
+ }
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0071-mt9t112-Trigger-autofocus-at-the-end-of-context-swit.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0071-mt9t112-Trigger-autofocus-at-the-end-of-context-swit.patch
new file mode 100644
index 0000000..dda88c4
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0071-mt9t112-Trigger-autofocus-at-the-end-of-context-swit.patch
@@ -0,0 +1,35 @@
+From a807b9f107bdcfbc9ba54ee4e67960f2e9912912 Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Mon, 19 Jul 2010 17:45:38 -0500
+Subject: [PATCH 71/75] mt9t112: Trigger autofocus at the end of context switch
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ drivers/media/video/mt9t112.c |    4 ++--
+ 1 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/media/video/mt9t112.c b/drivers/media/video/mt9t112.c
+index 8528417..0769f66 100644
+--- a/drivers/media/video/mt9t112.c
++++ b/drivers/media/video/mt9t112.c
+@@ -1080,8 +1080,6 @@ static int mt9t112_v4l2_int_s_power(struct v4l2_int_device *s,
+ 				  mt9t112_pixfmt_to_order(priv->pix.pixelformat));
+ 		mt9t112_mcu_write(ret, client, VAR8(1, 0), 0x06);
+ 
+-		ECHECKER(ret, mt9t112_auto_focus_trigger(client));
+-
+ 		ECHECKER(ret, mt9t112_goto_preview(client));
+ 
+ 		if ((priv->pix.width == MAX_WIDTH) &&
+@@ -1089,6 +1087,8 @@ static int mt9t112_v4l2_int_s_power(struct v4l2_int_device *s,
+ 			ECHECKER(ret, mt9t112_goto_capture(client));
+ 		}
+ 
++		ECHECKER(ret, mt9t112_auto_focus_trigger(client));
++
+ 		dev_dbg(&client->dev, "format : %d\n", priv->pix.pixelformat);
+ 		dev_dbg(&client->dev, "size   : %d x %d\n",
+ 			priv->pix.width,
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0072-omap3beagle-camera-Fix-dual-sensor-registration.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0072-omap3beagle-camera-Fix-dual-sensor-registration.patch
new file mode 100644
index 0000000..ab040e1
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0072-omap3beagle-camera-Fix-dual-sensor-registration.patch
@@ -0,0 +1,43 @@
+From 4ceb51197a0f0f2ebd9fc9530033f38de289a1cf Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Thu, 22 Jul 2010 11:03:33 -0500
+Subject: [PATCH 72/75] omap3beagle: camera: Fix dual sensor registration
+
+dev_index should be different, which represents an internal index
+in the master camera driver.
+
+Also, make device video nodes be alloted with the "first free", by setting
+dev_minor to -1.
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ arch/arm/mach-omap2/board-omap3beagle-camera.c |    6 +++---
+ 1 files changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle-camera.c b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+index 520e1d8..c0218e3 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle-camera.c
++++ b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+@@ -107,7 +107,7 @@ static int mt9v113_ifparm(struct v4l2_ifparm *p)
+ 
+ static struct omap34xxcam_hw_config mt9v113_hwc = {
+ 	.dev_index		= 0,
+-	.dev_minor		= 0,
++	.dev_minor		= -1,
+ 	.dev_type		= OMAP34XXCAM_SLAVE_SENSOR,
+ 	.u.sensor.sensor_isp	= 1,
+ 	.u.sensor.capture_mem	= MT9V113_MAX_FRAME_SIZE * 2,
+@@ -259,8 +259,8 @@ static int mt9t112_ifparm(struct v4l2_ifparm *p)
+ 
+ #if defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE)
+ static struct omap34xxcam_hw_config mt9t112_hwc = {
+-	.dev_index		= 0,
+-	.dev_minor		= 0,
++	.dev_index		= 1,
++	.dev_minor		= -1,
+ 	.dev_type		= OMAP34XXCAM_SLAVE_SENSOR,
+ 	.u.sensor.sensor_isp	= 0,
+ 	.u.sensor.capture_mem	= MT9T112_BIGGEST_FRAME_BYTE_SIZE,
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0073-mt9v113-Fix-State-variable-handling.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0073-mt9v113-Fix-State-variable-handling.patch
new file mode 100644
index 0000000..42e685e
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0073-mt9v113-Fix-State-variable-handling.patch
@@ -0,0 +1,68 @@
+From ac6564db6442fe40c974f233750c2fdd20735006 Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Thu, 22 Jul 2010 13:29:16 -0500
+Subject: [PATCH 73/75] mt9v113: Fix State variable handling
+
+State variable was misused, and was running detection all the
+time the sensor was powered back on.
+
+Reason? power off code was putting it to "not detected" always.
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ drivers/media/video/mt9v113.c |   23 ++++++++++++++---------
+ 1 files changed, 14 insertions(+), 9 deletions(-)
+
+diff --git a/drivers/media/video/mt9v113.c b/drivers/media/video/mt9v113.c
+index 6714240..37e3e19 100644
+--- a/drivers/media/video/mt9v113.c
++++ b/drivers/media/video/mt9v113.c
+@@ -1251,7 +1251,6 @@ static int ioctl_s_power(struct v4l2_int_device *s, enum v4l2_power on)
+ 		/* Disable mux for mt9v113 data path */
+ 		if (decoder->pdata->power_set)
+ 			err |= decoder->pdata->power_set(s, on);
+-		decoder->state = STATE_NOT_DETECTED;
+ 		break;
+ 
+ 	case V4L2_POWER_STANDBY:
+@@ -1260,23 +1259,29 @@ static int ioctl_s_power(struct v4l2_int_device *s, enum v4l2_power on)
+ 		break;
+ 
+ 	case V4L2_POWER_ON:
+-		/* Enable mux for mt9v113 data path */
+-		if (decoder->state == STATE_NOT_DETECTED) {
+-
+-			if (decoder->pdata->power_set)
+-				err = decoder->pdata->power_set(s, on);
++		if (decoder->pdata->power_set) {
++			err = decoder->pdata->power_set(s, on);
++			if (err)
++				return err;
++		}
+ 
++		if (decoder->state == STATE_NOT_DETECTED) {
+ 			/* Detect the sensor is not already detected */
+-			err |= mt9v113_detect(decoder);
++			err = mt9v113_detect(decoder);
+ 			if (err) {
+ 				v4l_err(decoder->client,
+ 						"Unable to detect decoder\n");
++				WARN_ON(1);
+ 				return err;
+ 			}
+ 		}
+ 		/* Only VGA mode for now */
+-		err |= mt9v113_configure(decoder);
+-		err |= mt9v113_vga_mode(decoder);
++		err = mt9v113_configure(decoder);
++		if (err)
++			return err;
++		err = mt9v113_vga_mode(decoder);
++		if (err)
++			return err;
+ 		break;
+ 
+ 	default:
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0074-Move-sensor-rest-to-after-applying-power.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0074-Move-sensor-rest-to-after-applying-power.patch
new file mode 100644
index 0000000..aaab1f7
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0074-Move-sensor-rest-to-after-applying-power.patch
@@ -0,0 +1,65 @@
+From cf2b4381eeb1bb33c60fa48ea7ba27de13bca5ab Mon Sep 17 00:00:00 2001
+From: Steve Kipisz <s-kipisz2@ti.com>
+Date: Thu, 5 Aug 2010 10:51:11 -0500
+Subject: [PATCH 74/75] Move sensor rest to after applying power.
+
+---
+ arch/arm/mach-omap2/board-omap3beagle-camera.c |   12 ++++++++----
+ 1 files changed, 8 insertions(+), 4 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle-camera.c b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+index c0218e3..110c2c9 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle-camera.c
++++ b/arch/arm/mach-omap2/board-omap3beagle-camera.c
+@@ -160,8 +160,6 @@ static int mt9v113_power_set(struct v4l2_int_device *s, enum v4l2_power power)
+ 	case V4L2_POWER_ON:
+ 
+ 		isp_configure_interface(vdev->cam->isp, &mt9v113_if_config);
+-		/* Set RESET_BAR to 0 */
+-		gpio_set_value(LEOPARD_RESET_GPIO, 0);
+ 
+ 		/* turn on VDD */
+ 		regulator_enable(cam_1v8_reg);
+@@ -170,6 +168,9 @@ static int mt9v113_power_set(struct v4l2_int_device *s, enum v4l2_power power)
+ 		regulator_enable(cam_2v8_reg);
+ 		mdelay(50);
+ 
++		/* Set RESET_BAR to 0 */
++		gpio_set_value(LEOPARD_RESET_GPIO, 0);
++
+ 		/* Enable EXTCLK */
+ 		isp_set_xclk(vdev->cam->isp, MT9V113_CLK_MIN*2, CAM_USE_XCLKA);
+ 		/*
+@@ -177,8 +178,10 @@ static int mt9v113_power_set(struct v4l2_int_device *s, enum v4l2_power power)
+ 		 * ((1000000 * 70) / 6000000) = aprox 12 us.
+ 		 */
+ 		udelay(12);
++
+ 		/* Set RESET_BAR to 1 */
+ 		gpio_set_value(LEOPARD_RESET_GPIO, 1);
++
+ 		/*
+ 		 * Wait at least 100 CLK cycles (w/EXTCLK = 6MHz, or CLK_MIN):
+ 		 * ((1000000 * 100) / 6000000) = aprox 17 us.
+@@ -317,8 +320,6 @@ static int mt9t112_power_set(struct v4l2_int_device *s, enum v4l2_power power)
+ 		isp_configure_interface(vdev->cam->isp, &mt9t112_if_config);
+ #endif
+ 
+-		/* Set RESET_BAR to 0 */
+-		gpio_set_value(LEOPARD_RESET_GPIO, 0);
+ 
+ 		/* turn on VDD */
+ 		regulator_enable(cam_1v8_reg);
+@@ -330,6 +331,9 @@ static int mt9t112_power_set(struct v4l2_int_device *s, enum v4l2_power power)
+ 
+ 		mdelay(50);
+ 
++		/* Set RESET_BAR to 0 */
++		gpio_set_value(LEOPARD_RESET_GPIO, 0);
++
+ 		/* Enable EXTCLK */
+ 		isp_set_xclk(vdev->cam->isp, 24000000, CAM_USE_XCLKA);
+ 
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0075-omap3beagle-Add-camera-bootarg.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0075-omap3beagle-Add-camera-bootarg.patch
new file mode 100644
index 0000000..fb1b049
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/cam/0075-omap3beagle-Add-camera-bootarg.patch
@@ -0,0 +1,108 @@
+From b23565171bddf4f2e454f7857d52a5a79da00ba7 Mon Sep 17 00:00:00 2001
+From: Sergio Aguirre <saaguirre@ti.com>
+Date: Thu, 22 Jul 2010 15:38:43 -0500
+Subject: [PATCH 75/75] omap3beagle: Add camera bootarg
+
+This adds a new 'camera' bootarg, with (so far) 2 new possible types:
+- lbcmvga: Leopard Board Camera Module: MT9V113 VGA
+- lbcm3m1: Leopard Board Camera Module: MT9T111 3MP
+
+Also, cleans up a little bit the current i2c2 bus init code.
+
+Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
+---
+ arch/arm/mach-omap2/board-omap3beagle.c |   42 +++++++++++++++++++++++++------
+ 1 files changed, 34 insertions(+), 8 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index f93616b..2677b41 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -89,6 +89,7 @@ extern struct mt9t112_platform_data mt9t112_pdata;
+ #define NAND_BLOCK_SIZE		SZ_128K
+ 
+ char expansionboard_name[16];
++char cameraboard_name[16];
+ 
+ #if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
+ 
+@@ -595,13 +596,16 @@ static struct i2c_board_info __initdata beagle_zippy_i2c2_boardinfo[] = {
+ static struct i2c_board_info __initdata beagle_zippy_i2c2_boardinfo[] = {};
+ #endif
+ 
+-static struct i2c_board_info __initdata beagle_i2c2_boardinfo[] = {
++static struct i2c_board_info __initdata beagle_lbcmvga_i2c2_boardinfo[] = {
+ #if defined(CONFIG_VIDEO_MT9V113) || defined(CONFIG_VIDEO_MT9V113_MODULE)
+ 	{
+ 		I2C_BOARD_INFO("mt9v113", MT9V113_I2C_ADDR),
+ 		.platform_data	= &mt9v113_pdata,
+ 	},
+ #endif
++};
++
++static struct i2c_board_info __initdata beagle_lbcm3m1_i2c2_boardinfo[] = {
+ #if defined(CONFIG_VIDEO_MT9T112) || defined(CONFIG_VIDEO_MT9T112_MODULE)
+ 	{
+ 		I2C_BOARD_INFO("mt9t112", MT9T112_I2C_ADDR),
+@@ -614,15 +618,27 @@ static int __init omap3_beagle_i2c_init(void)
+ {
+ 	omap_register_i2c_bus(1, 2600, beagle_i2c1_boardinfo,
+ 			ARRAY_SIZE(beagle_i2c1_boardinfo));
+-	if(!strcmp(expansionboard_name, "zippy") || !strcmp(expansionboard_name, "zippy2"))
+-	{
+-		printk(KERN_INFO "Beagle expansionboard: registering i2c2 bus for zippy/zippy2\n");
++
++	if (!strcmp(expansionboard_name, "zippy") ||
++	   !strcmp(expansionboard_name, "zippy2")) {
++		printk(KERN_INFO "Beagle expansionboard:"
++				 " registering i2c2 bus for zippy/zippy2\n");
+ 		omap_register_i2c_bus(2, 400,  beagle_zippy_i2c2_boardinfo,
+ 				ARRAY_SIZE(beagle_zippy_i2c2_boardinfo));
+-	} else
+-	{
+-		omap_register_i2c_bus(2, 400,  beagle_i2c2_boardinfo,
+-				ARRAY_SIZE(beagle_i2c2_boardinfo));
++	} else {
++		if (!strcmp(cameraboard_name, "lbcmvga")) {
++			printk(KERN_INFO "Beagle cameraboard:"
++					 " registering i2c2 bus for lbcmvga\n");
++			omap_register_i2c_bus(2, 400,  beagle_lbcmvga_i2c2_boardinfo,
++					ARRAY_SIZE(beagle_lbcmvga_i2c2_boardinfo));
++		} else if (!strcmp(cameraboard_name, "lbcm3m1")) {
++			printk(KERN_INFO "Beagle cameraboard:"
++					 " registering i2c2 bus for lbcm3m1\n");
++			omap_register_i2c_bus(2, 400,  beagle_lbcm3m1_i2c2_boardinfo,
++					ARRAY_SIZE(beagle_lbcm3m1_i2c2_boardinfo));
++		} else {
++			omap_register_i2c_bus(2, 400, NULL, 0);
++		}
+ 	}
+ 	/* Bus 3 is attached to the DVI port where devices like the pico DLP
+ 	 * projector don't work reliably with 400kHz */
+@@ -825,6 +841,15 @@ static int __init expansionboard_setup(char *str)
+ 	return 0;
+ }
+ 
++static int __init cameraboard_setup(char *str)
++{
++	if (!str)
++		return -EINVAL;
++	strncpy(cameraboard_name, str, 16);
++	printk(KERN_INFO "Beagle cameraboard: %s\n", cameraboard_name);
++	return 0;
++}
++
+ static void __init omap3_beagle_init(void)
+ {
+ 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+@@ -915,6 +940,7 @@ static void __init omap3_beagle_map_io(void)
+ }
+ 
+ early_param("buddy", expansionboard_setup);
++early_param("camera", cameraboard_setup);
+ 
+ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
+ 	/* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/dm37x-evm/defconfig b/recipes-bsp/linux/linux-omap-psp-2.6.32/dm37x-evm/defconfig
new file mode 100644
index 0000000..8f1868d
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/dm37x-evm/defconfig
@@ -0,0 +1,2024 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32
+# Fri Jul  9 10:08:46 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_OPROFILE_ARMV7=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+CONFIG_OMAP_SMARTREFLEX=y
+# CONFIG_OMAP_SMARTREFLEX_TESTING is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_IOMMU=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
+# CONFIG_OMAP3_DEBOBS is not set
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+# CONFIG_OMAP_LL_DEBUG_NONE is not set
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+# CONFIG_OMAP_PM_SRF is not set
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+CONFIG_OMAP_PACKAGE_CBB=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+CONFIG_MACH_OMAP3EVM=y
+CONFIG_PMIC_TWL4030=y
+# CONFIG_MACH_OMAP3517EVM is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_OMAP_ZOOM3 is not set
+# CONFIG_MACH_CM_T35 is not set
+# CONFIG_MACH_IGEP0020 is not set
+# CONFIG_MACH_OMAP_3630SDP is not set
+# CONFIG_OMAP3_EMU is not set
+# CONFIG_OMAP3_SDRC_AC_TIMING is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_USER_L2_PLE is not set
+# CONFIG_USER_PMON is not set
+CONFIG_ARM_ERRATA_430973=y
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+CONFIG_CPU_V7_SYSFS=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=" debug "
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=""
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_OMAP_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_OMAP2=y
+# CONFIG_MTD_NAND_OMAP_PREFETCH is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+# CONFIG_MTD_ONENAND_GENERIC is not set
+CONFIG_MTD_ONENAND_OMAP2=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_TI_DAVINCI_EMAC is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET=y
+# CONFIG_USB_NET_AX8817X is not set
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_CDC_EEM is not set
+CONFIG_USB_NET_DM9601=y
+# CONFIG_USB_NET_SMSC95XX is not set
+# CONFIG_USB_NET_GL620A is not set
+# CONFIG_USB_NET_NET1080 is not set
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+# CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_TWL4030=y
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_TSC2004 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+# CONFIG_SPI_XILINX is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+# CONFIG_TWL4030_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_TWL4030_POWER is not set
+CONFIG_TWL4030_CODEC=y
+# CONFIG_TWL4030_MADC is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=y
+CONFIG_MEDIA_TUNER_TDA8290=y
+CONFIG_MEDIA_TUNER_TDA9887=y
+CONFIG_MEDIA_TUNER_TEA5761=y
+CONFIG_MEDIA_TUNER_TEA5767=y
+CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER_XC2028=y
+CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_MEDIA_TUNER_MC44S803=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_SG=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# RDS decoders
+#
+# CONFIG_VIDEO_SAA6588 is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_ADV7180 is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_MT9V011 is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_MT9P012 is not set
+# CONFIG_VIDEO_MT9T111 is not set
+# CONFIG_VIDEO_DW9710 is not set
+# CONFIG_VIDEO_OV3640 is not set
+# CONFIG_VIDEO_IMX046 is not set
+# CONFIG_VIDEO_LV8093 is not set
+# CONFIG_VIDEO_SAA7110 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_SAA7191 is not set
+CONFIG_VIDEO_TVP514X=y
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_VPX3220 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+CONFIG_TI_MEDIA=y
+# CONFIG_VIDEO_VPSS_SYSTEM is not set
+# CONFIG_VIDEO_VPFE_CAPTURE is not set
+CONFIG_VIDEO_OMAP2_VOUT=y
+CONFIG_VIDEO_OMAP3=y
+CONFIG_VIDEO_OMAP3_ISP=y
+# CONFIG_VIDEO_OMAP34XX_ISP_PREVIEWER is not set
+CONFIG_VIDEO_OMAP34XX_ISP_RESIZER=y
+# CONFIG_SOC_CAMERA is not set
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=y
+# CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV is not set
+# CONFIG_USB_GSPCA is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_HDPVR is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_CX231XX is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_ET61X251 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_PWC is not set
+# CONFIG_USB_PWC_INPUT_EVDEV is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_TMIO is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_OMAP2_VRAM=y
+CONFIG_OMAP2_VRFB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=4
+# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
+# CONFIG_OMAP2_DSS_RFBI is not set
+CONFIG_OMAP2_DSS_VENC=y
+CONFIG_OMAP2_VENC_OUT_TYPE_SVIDEO=y
+# CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE is not set
+# CONFIG_OMAP2_DSS_SDI is not set
+CONFIG_OMAP2_DSS_DSI=y
+CONFIG_OMAP2_DSS_USE_DSI_PLL=y
+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=1
+CONFIG_FB_OMAP2=y
+# CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set
+# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
+CONFIG_FB_OMAP2_NUM_FBS=1
+
+#
+# OMAP2/3 Display Device Drivers
+#
+CONFIG_PANEL_GENERIC=y
+# CONFIG_PANEL_LGPHILIPS_LB035Q02 is not set
+# CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C is not set
+CONFIG_PANEL_SHARP_LS037V7DW01=y
+# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set
+# CONFIG_PANEL_TAAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=y
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_MCBSP=y
+CONFIG_SND_OMAP_SOC_OMAP3EVM=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_TWL4030=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+CONFIG_MUSB_USE_SYSTEM_DMA_RX=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_TI_CPPI41_DMA is not set
+CONFIG_USB_MUSB_DEBUG=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=y
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_TWL4030_USB is not set
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+CONFIG_RTC_DRV_TWL4030=y
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_FS_JOURNAL_INFO=y
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0001-ARM-OMAP-add-spi-platform-devices.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0001-ARM-OMAP-add-spi-platform-devices.patch
new file mode 100644
index 0000000..8988fd8
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0001-ARM-OMAP-add-spi-platform-devices.patch
@@ -0,0 +1,62 @@
+From 0031d3fb2d067f4c46e434f5f5c6c14cef2a83a3 Mon Sep 17 00:00:00 2001
+From: Tim Yamin <plasm@roo.me.uk>
+Date: Sat, 11 Apr 2009 13:05:21 -0700
+Subject: [PATCH 01/17] ARM: OMAP: add spi platform devices
+
+---
+ arch/arm/mach-omap2/devices.c |   32 ++++++++++++++++++++++++++++++++
+ 1 files changed, 32 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
+index 18ad931..ae67ada 100644
+--- a/arch/arm/mach-omap2/devices.c
++++ b/arch/arm/mach-omap2/devices.c
+@@ -15,6 +15,7 @@
+ #include <linux/platform_device.h>
+ #include <linux/io.h>
+ #include <linux/clk.h>
++#include <linux/spi/spi_gpio.h> 
+ 
+ #include <mach/hardware.h>
+ #include <asm/mach-types.h>
+@@ -373,6 +374,37 @@ static struct platform_device omap2_mcspi4 = {
+ 		.platform_data = &omap2_mcspi4_config,
+ 	},
+ };
++
++static struct spi_gpio_platform_data spi3_gpio_platform_data = {
++       .miso           = 132,
++       .mosi           = 131,
++       .sck            = 130,
++       .num_chipselect = 1,
++};
++
++static struct platform_device spi3_gpio = {
++       .name           = "spi_gpio",
++       .id             = 3,
++       .dev            = {
++               .platform_data = &spi3_gpio_platform_data,
++       },
++};
++ 
++static struct spi_gpio_platform_data spi4_gpio_platform_data = {
++       .miso           = 159,
++       .mosi           = 158,
++       .sck            = 156,
++       .num_chipselect = 1,
++};
++
++static struct platform_device spi4_gpio = {
++       .name           = "spi_gpio",
++       .id             = 4,
++       .dev            = {
++               .platform_data = &spi4_gpio_platform_data,
++       },
++};
++ 
+ #endif
+ 
+ #ifdef CONFIG_ARCH_OMAP4
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0002-MMA7455L-accelerometer-driver.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0002-MMA7455L-accelerometer-driver.patch
new file mode 100644
index 0000000..f9c7702
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0002-MMA7455L-accelerometer-driver.patch
@@ -0,0 +1,683 @@
+From 0c804b06c04a14da575d592c89408537c21fb26b Mon Sep 17 00:00:00 2001
+From: Tim Yamin <plasm@roo.me.uk>
+Date: Tue, 23 Mar 2010 09:52:10 +0100
+Subject: [PATCH 02/17] MMA7455L accelerometer driver
+
+---
+ drivers/input/misc/Kconfig    |    9 +
+ drivers/input/misc/Makefile   |    1 +
+ drivers/input/misc/mma7455l.c |  615 +++++++++++++++++++++++++++++++++++++++++
+ include/linux/mma7455l.h      |   11 +
+ 4 files changed, 636 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/input/misc/mma7455l.c
+ create mode 100644 include/linux/mma7455l.h
+
+diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
+index 16ec523..d35ae19 100644
+--- a/drivers/input/misc/Kconfig
++++ b/drivers/input/misc/Kconfig
+@@ -319,4 +319,13 @@ config INPUT_PCAP
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called pcap_keys.
+ 
++config INPUT_MMA7455L
++	tristate "Freescale MMA7455L 3-axis accelerometer"
++	depends on SPI_MASTER
++	help
++	  SPI driver for the Freescale MMA7455L 3-axis accelerometer.
++
++	  The userspace interface is a 3-axis (X/Y/Z) relative movement
++	  Linux input device, reporting REL_[XYZ] events.
++
+ endif
+diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
+index a8b8485..75b8baa 100644
+--- a/drivers/input/misc/Makefile
++++ b/drivers/input/misc/Makefile
+@@ -30,4 +30,5 @@ obj-$(CONFIG_INPUT_WINBOND_CIR)		+= winbond-cir.o
+ obj-$(CONFIG_INPUT_WISTRON_BTNS)	+= wistron_btns.o
+ obj-$(CONFIG_INPUT_WM831X_ON)		+= wm831x-on.o
+ obj-$(CONFIG_INPUT_YEALINK)		+= yealink.o
++obj-$(CONFIG_INPUT_MMA7455L)		+= mma7455l.o
+ 
+diff --git a/drivers/input/misc/mma7455l.c b/drivers/input/misc/mma7455l.c
+new file mode 100644
+index 0000000..b907cc6
+--- /dev/null
++++ b/drivers/input/misc/mma7455l.c
+@@ -0,0 +1,615 @@
++/* Linux kernel driver for the Freescale MMA7455L 3-axis accelerometer
++ *
++ * Copyright (C) 2009 by Always Innovating, Inc.
++ * Author: Gregoire Gentil <gregoire@gentil.com>
++ * Author: Tim Yamin <plasm@roo.me.uk>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ *
++ */
++
++/*
++ * What this driver doesn't yet support:
++ *
++ * - I2C
++ * - INT2 handling
++ * - Pulse detection (and the sysctls to control it)
++ * - 10-bit measurement
++ */
++
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/module.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++#include <linux/input.h>
++#include <linux/irq.h>
++#include <linux/interrupt.h>
++#include <linux/sysfs.h>
++#include <linux/gpio.h>
++
++#include <linux/mma7455l.h>
++#include <linux/spi/spi.h>
++
++#define MMA7455L_WHOAMI_MAGIC		0x55
++
++enum mma7455l_reg {
++	MMA7455L_REG_XOUTL		= 0x00,
++	MMA7455L_REG_XOUTH		= 0x01,
++	MMA7455L_REG_YOUTL		= 0x02,
++	MMA7455L_REG_YOUTH		= 0x03,
++	MMA7455L_REG_ZOUTL 		= 0x04,
++	MMA7455L_REG_ZOUTH		= 0x05,
++	MMA7455L_REG_XOUT8		= 0x06,
++	MMA7455L_REG_YOUT8		= 0x07,
++	MMA7455L_REG_ZOUT8		= 0x08,
++	MMA7455L_REG_STATUS		= 0x09,
++	MMA7455L_REG_DETSRC		= 0x0a,
++	MMA7455L_REG_TOUT		= 0x0b,
++	MMA7455L_REG_RESERVED1		= 0x0c,
++	MMA7455L_REG_I2CAD		= 0x0d,
++	MMA7455L_REG_USRINF		= 0x0e,
++	MMA7455L_REG_WHOAMI		= 0x0f,
++	MMA7455L_REG_XOFFL		= 0x10,
++	MMA7455L_REG_XOFFH		= 0x11,
++	MMA7455L_REG_YOFFL		= 0x12,
++	MMA7455L_REG_YOFFH		= 0x13,
++	MMA7455L_REG_ZOFFL		= 0x14,
++	MMA7455L_REG_ZOFFH		= 0x15,
++	MMA7455L_REG_MCTL		= 0x16,
++	MMA7455L_REG_INTRST		= 0x17,
++	MMA7455L_REG_CTL1		= 0x18,
++	MMA7455L_REG_CTL2		= 0x19,
++	MMA7455L_REG_LDTH		= 0x1a,
++	MMA7455L_REG_PDTH		= 0x1b,
++	MMA7455L_REG_PW			= 0x1c,
++	MMA7455L_REG_LT			= 0x1d,
++	MMA7455L_REG_TW			= 0x1e,
++	MMA7455L_REG_RESERVED2		= 0x1f,
++};
++
++enum mma7455l_reg_status {
++	MMA7455L_STATUS_XDA		= 0x08,
++	MMA7455L_STATUS_YDA		= 0x10,
++	MMA7455L_STATUS_ZDA		= 0x20,
++};
++
++enum mma7455l_mode {
++	MMA7455L_MODE_STANDBY		= 0,
++	MMA7455L_MODE_MEASUREMENT	= 1,
++	MMA7455L_MODE_LEVELDETECTION	= 0x42, /* Set DRPD to on */
++	MMA7455L_MODE_PULSEDETECTION	= 0x43, /* Set DRPD to on */
++	MMA7455L_MODE_MASK		= 0x43,
++};
++
++enum mma7455l_gselect {
++	MMA7455L_GSELECT_8		= 0x0,
++	MMA7455L_GSELECT_2		= 0x4,
++	MMA7455L_GSELECT_4		= 0x8,
++	MMA7455L_GSELECT_MASK		= 0xC,
++};
++
++/* FIXME */
++#define MMA7455L_F_FS			0x0020 	/* ADC full scale */
++
++struct mma7455l_info {
++	struct spi_device *spi_dev;
++	struct input_dev *input_dev;
++	struct mutex lock;
++	struct delayed_work work;
++
++	u8 mode;
++	u8 gSelect;
++
++	u8 flags;
++	u8 working;
++};
++
++/* lowlevel register access functions */
++
++#define WRITE_BIT	(1 << 7)
++#define ADDR_SHIFT	1
++
++static inline u_int8_t __reg_read(struct mma7455l_info *mma, u_int8_t reg)
++{
++	int rc;
++	u_int8_t cmd;
++
++	cmd = ((reg & 0x3f) << ADDR_SHIFT);
++	rc = spi_w8r8(mma->spi_dev, cmd);
++
++	return rc;
++}
++
++static u_int8_t reg_read(struct mma7455l_info *mma, u_int8_t reg)
++{
++	u_int8_t ret;
++
++	mutex_lock(&mma->lock);
++	ret = __reg_read(mma, reg);
++	mutex_unlock(&mma->lock);
++
++	return ret;
++}
++
++static s16 __reg_read_10(struct mma7455l_info *mma, u8 reg1, u8 reg2)
++{
++	u8 v1, v2;
++
++	v1 = __reg_read(mma, reg1);
++	v2 = __reg_read(mma, reg2);
++
++	return (v2 & 0x4) << 13 | (v2 & 0x3) << 8 | v1;
++}
++
++static inline int __reg_write(struct mma7455l_info *mma, u_int8_t reg, u_int8_t val)
++{
++	u_int8_t buf[2];
++
++	buf[0] = ((reg & 0x3f) << ADDR_SHIFT) | WRITE_BIT;
++	buf[1] = val;
++
++	return spi_write(mma->spi_dev, buf, sizeof(buf));
++}
++
++static int reg_write(struct mma7455l_info *mma, u_int8_t reg, u_int8_t val)
++{
++	int ret;
++
++	mutex_lock(&mma->lock);
++	ret = __reg_write(mma, reg, val);
++	mutex_unlock(&mma->lock);
++
++	return ret;
++}
++
++static s16 __reg_write_10(struct mma7455l_info *mma, u8 reg1, u8 reg2, s16 value)
++{
++	int ret;
++	u8 v1, v2;
++
++	v1 = value & 0xFF;
++	if(value < 0)
++		v2 = ((value >> 8) & 0x3) | 0x4;
++	else
++		v2 = 0;
++
++	ret = __reg_write(mma, reg1, v1);
++	ret = __reg_write(mma, reg2, v2);
++	return ret;
++}
++
++static void mma7455l_work(struct work_struct *work)
++{
++	struct mma7455l_info *mma =
++			container_of(work, struct mma7455l_info, work.work);
++
++	s8 val;
++	mma->working = 1;
++
++	/* FIXME: 10 bit accuracy? */
++	if (!(mma->flags & MMA7455L_STATUS_XDA)) {
++		val = reg_read(mma, MMA7455L_REG_XOUT8);
++		input_report_abs(mma->input_dev, ABS_X, val);
++	}
++	if (!(mma->flags & MMA7455L_STATUS_YDA)) {
++		val = reg_read(mma, MMA7455L_REG_YOUT8);
++		input_report_abs(mma->input_dev, ABS_Y, val);
++	}
++	if (!(mma->flags & MMA7455L_STATUS_ZDA)) {
++		val = reg_read(mma, MMA7455L_REG_ZOUT8);
++		input_report_abs(mma->input_dev, ABS_Z, val);
++	}
++
++	mma->working = 0;
++	input_sync(mma->input_dev);
++	put_device(&mma->spi_dev->dev);
++
++	/* Enable IRQ and clear out interrupt */
++	reg_write(mma, MMA7455L_REG_INTRST, 0x3);
++	reg_write(mma, MMA7455L_REG_INTRST, 0x0);
++	enable_irq(mma->spi_dev->irq);
++}
++
++static void mma7455l_schedule_work(struct mma7455l_info *mma)
++{
++	int status;
++
++	get_device(&mma->spi_dev->dev);
++	status = schedule_delayed_work(&mma->work, HZ / 10);
++}
++
++static irqreturn_t mma7455l_interrupt(int irq, void *_mma)
++{
++	struct mma7455l_info *mma = _mma;
++
++	/* Disable any further interrupts until we have processed
++	 * the current one */
++	disable_irq_nosync(mma->spi_dev->irq);
++
++	mma7455l_schedule_work(mma);
++	return IRQ_HANDLED;
++}
++
++/* sysfs */ 
++
++static void get_mode(struct mma7455l_info *mma, u8 *mode, u8 *gSelect)
++{
++	u8 tmp = reg_read(mma, MMA7455L_REG_MCTL);
++
++	*mode = tmp & MMA7455L_MODE_MASK;
++	*gSelect = tmp & MMA7455L_GSELECT_MASK;
++}
++
++static void set_mode(struct mma7455l_info *mma, u8 mode, u8 gSelect)
++{
++	reg_write(mma, MMA7455L_REG_MCTL, mode | gSelect);
++}
++
++static void update_mode(struct mma7455l_info *mma, u8 mode, u8 gSelect)
++{
++	mma->mode = mode;
++	mma->gSelect = gSelect;
++
++	reg_write(mma, MMA7455L_REG_MCTL, mma->mode | mma->gSelect);
++}
++
++static ssize_t show_measure(struct device *dev, struct device_attribute *attr, char *buf)
++{
++	struct mma7455l_info *mma = dev_get_drvdata(dev);
++	s8 x, y, z;
++	u8 old_Mode, old_gSelect;
++
++	get_mode(mma, &old_Mode, &old_gSelect);
++	set_mode(mma, MMA7455L_MODE_MEASUREMENT, MMA7455L_GSELECT_2);
++
++	while (reg_read(mma, MMA7455L_REG_STATUS) == 0) {
++		msleep(10);
++	}
++
++	x = reg_read(mma, MMA7455L_REG_XOUT8);
++	y = reg_read(mma, MMA7455L_REG_YOUT8);
++	z = reg_read(mma, MMA7455L_REG_ZOUT8);
++
++	set_mode(mma, old_Mode, old_gSelect);
++	return sprintf(buf, "%d %d %d\n", x, y, z);
++}
++
++static ssize_t show_mode(struct device *dev, struct device_attribute *attr, char *buf)
++{
++	struct mma7455l_info *mma = dev_get_drvdata(dev);
++
++	switch(mma->mode)
++	{
++		case MMA7455L_MODE_STANDBY:
++			return sprintf(buf, "Standby\n");
++			break;
++		case MMA7455L_MODE_MEASUREMENT:
++			return sprintf(buf, "Measurement\n");
++			break;
++		case MMA7455L_MODE_LEVELDETECTION:
++			return sprintf(buf, "Level Detection\n");
++			break;
++		case MMA7455L_MODE_PULSEDETECTION:
++			return sprintf(buf, "Pulse Detection\n");
++			break;
++	}
++
++	return sprintf(buf, "Unknown mode!\n");
++}
++
++static ssize_t show_gSelect(struct device *dev, struct device_attribute *attr, char *buf)
++{
++	struct mma7455l_info *mma = dev_get_drvdata(dev);
++
++	switch(mma->gSelect)
++	{
++		case MMA7455L_GSELECT_8:
++			return sprintf(buf, "8\n");
++			break;
++		case MMA7455L_GSELECT_4:
++			return sprintf(buf, "4\n");
++			break;
++		case MMA7455L_GSELECT_2:
++			return sprintf(buf, "2\n");
++			break;
++	}
++
++	return sprintf(buf, "Unknown gSelect!\n");
++}
++
++static ssize_t show_level_threshold(struct device *dev, struct device_attribute *attr, char *buf)
++{
++	struct mma7455l_info *mma = dev_get_drvdata(dev);
++	return sprintf(buf, "%u\n", reg_read(mma, MMA7455L_REG_LDTH));
++}
++
++static ssize_t show_calibration(struct device *dev, struct device_attribute *attr, char *buf)
++{
++	s16 x, y, z;
++	struct mma7455l_info *mma = dev_get_drvdata(dev);
++
++	mutex_lock(&mma->lock);
++	x = __reg_read_10(mma, MMA7455L_REG_XOFFL, MMA7455L_REG_XOFFH);
++	y = __reg_read_10(mma, MMA7455L_REG_YOFFL, MMA7455L_REG_YOFFH);
++	z = __reg_read_10(mma, MMA7455L_REG_ZOFFL, MMA7455L_REG_ZOFFH);
++	mutex_unlock(&mma->lock);
++
++	return sprintf(buf, "%d %d %d\n", x, y, z);
++}
++
++static ssize_t write_mode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
++{
++	struct mma7455l_info *mma = dev_get_drvdata(dev);
++
++	if (!strncmp(buf, "Standby", count))
++		update_mode(mma, MMA7455L_MODE_STANDBY, mma->gSelect);
++	else if (!strncmp(buf, "Measurement", count))
++		update_mode(mma, MMA7455L_MODE_MEASUREMENT, mma->gSelect);
++	else if (!strncmp(buf, "Level Detection", count))
++		update_mode(mma, MMA7455L_MODE_LEVELDETECTION, mma->gSelect);
++	else if (!strncmp(buf, "Pulse Detection", count))
++		update_mode(mma, MMA7455L_MODE_PULSEDETECTION, mma->gSelect);
++
++	return count;
++}
++
++static ssize_t write_gSelect(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
++{
++	unsigned long v;
++	struct mma7455l_info *mma = dev_get_drvdata(dev);
++
++	if(strict_strtoul(buf, 10, &v) == 0)
++	{
++		switch(v)
++		{
++			case 8:
++				update_mode(mma, mma->mode, MMA7455L_GSELECT_8);
++				break;
++			case 4:
++				update_mode(mma, mma->mode, MMA7455L_GSELECT_4);
++				break;
++			case 2:
++				update_mode(mma, mma->mode, MMA7455L_GSELECT_2);
++				break;
++			default:
++				return -EINVAL;
++				break;
++		}
++		return count;
++	}
++
++	return -EINVAL;
++}
++
++static ssize_t write_level_threshold(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
++{
++	unsigned long v;
++	struct mma7455l_info *mma = dev_get_drvdata(dev);
++
++	if(strict_strtoul(buf, 10, &v) == 0)
++	{
++		if(v <= 0xFF) {
++			reg_write(mma, MMA7455L_REG_LDTH, v);
++			return count;
++		} else
++			return -EINVAL;
++	}
++
++	return -EINVAL;
++}
++
++static ssize_t write_calibration(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
++{
++	int x, y, z;
++	struct mma7455l_info *mma = dev_get_drvdata(dev);
++
++	if (sscanf(buf, "%d %d %d", &x, &y, &z) == 3)
++	{
++		mutex_lock(&mma->lock);
++		__reg_write_10(mma, MMA7455L_REG_XOFFL, MMA7455L_REG_XOFFH, x);
++		__reg_write_10(mma, MMA7455L_REG_YOFFL, MMA7455L_REG_YOFFH, y);
++		__reg_write_10(mma, MMA7455L_REG_ZOFFL, MMA7455L_REG_ZOFFH, z);
++		mutex_unlock(&mma->lock);
++
++		return count;
++	}
++
++	return -EINVAL;
++}
++
++static DEVICE_ATTR(measure, S_IRUGO, show_measure, NULL);
++static DEVICE_ATTR(mode, S_IRUGO | S_IWUGO, show_mode, write_mode);
++static DEVICE_ATTR(gSelect, S_IRUGO | S_IWUGO, show_gSelect, write_gSelect);
++static DEVICE_ATTR(level_threshold, S_IRUGO | S_IWUGO, show_level_threshold, write_level_threshold);
++static DEVICE_ATTR(calibration, S_IRUGO | S_IWUGO, show_calibration, write_calibration);
++
++static struct attribute *mma7455l_sysfs_entries[] = {
++        &dev_attr_measure.attr,
++	&dev_attr_mode.attr,
++	&dev_attr_gSelect.attr,
++	&dev_attr_level_threshold.attr,
++	&dev_attr_calibration.attr,
++	NULL
++};
++
++static struct attribute_group mma7455l_attr_group = {
++        .attrs  = mma7455l_sysfs_entries,
++};
++
++/* input device handling and driver core interaction */
++static int mma7455l_input_open(struct input_dev *inp)
++{
++	struct mma7455l_info *mma = input_get_drvdata(inp);
++	if(mma->mode == MMA7455L_MODE_STANDBY)
++		update_mode(mma, MMA7455L_MODE_MEASUREMENT, mma->gSelect);
++
++	return 0;
++}
++
++static void mma7455l_input_close(struct input_dev *inp)
++{
++	struct mma7455l_info *mma = input_get_drvdata(inp);
++	update_mode(mma, MMA7455L_MODE_STANDBY, MMA7455L_GSELECT_2);
++}
++
++static int __devinit mma7455l_probe(struct spi_device *spi)
++{
++	int rc;
++	struct mma7455l_info *mma;
++	struct mma7455l_platform_data *pdata = spi->dev.platform_data;
++	u_int8_t wai;
++
++	mma = kzalloc(sizeof(*mma), GFP_KERNEL);
++	if (!mma)
++		return -ENOMEM;
++
++	mutex_init(&mma->lock);
++	INIT_DELAYED_WORK(&mma->work, mma7455l_work);
++	mma->spi_dev = spi;
++	mma->flags = mma->working = 0;
++
++	spi_set_drvdata(spi, mma);
++
++	rc = spi_setup(spi);
++	if (rc < 0) {
++		printk(KERN_ERR "mma7455l error durign spi_setup of mma7455l driver\n");
++		dev_set_drvdata(&spi->dev, NULL);
++		kfree(mma);
++		return rc;
++	}
++
++	wai = reg_read(mma, MMA7455L_REG_WHOAMI);
++	if (wai != MMA7455L_WHOAMI_MAGIC) {
++		printk(KERN_ERR "mma7455l unknown whoami signature 0x%02x\n", wai);
++		dev_set_drvdata(&spi->dev, NULL);
++		kfree(mma);
++		return -ENODEV;
++	}
++
++	rc = request_irq(mma->spi_dev->irq, mma7455l_interrupt, IRQF_TRIGGER_HIGH,
++			 "mma7455l", mma);
++	if (rc < 0) {
++		dev_err(&spi->dev, "mma7455l error requesting IRQ %d\n",
++			mma->spi_dev->irq);
++		/* FIXME */
++		return rc;
++	}
++
++        rc = sysfs_create_group(&spi->dev.kobj, &mma7455l_attr_group);
++        if (rc) {
++                dev_err(&spi->dev, "error creating sysfs group\n");
++                return rc;
++        }
++
++	/* initialize input layer details */
++	mma->input_dev = input_allocate_device();
++	if (!mma->input_dev) {
++		dev_err(&spi->dev, "mma7455l Unable to allocate input device\n");
++		/* FIXME */
++	}
++
++	set_bit(EV_ABS, mma->input_dev->evbit);
++	set_bit(ABS_X, mma->input_dev->absbit);
++	set_bit(ABS_Y, mma->input_dev->absbit);
++	set_bit(ABS_Z, mma->input_dev->absbit);
++
++	input_set_drvdata(mma->input_dev, mma);
++	mma->input_dev->name = "MMA7455L";
++	mma->input_dev->open = mma7455l_input_open;
++	mma->input_dev->close = mma7455l_input_close;
++
++	rc = input_register_device(mma->input_dev);
++	if(!rc)
++	{
++		update_mode(mma, MMA7455L_MODE_STANDBY, MMA7455L_GSELECT_2);
++
++		mutex_lock(&mma->lock);
++		__reg_write_10(mma, MMA7455L_REG_XOFFL, MMA7455L_REG_XOFFH, pdata->calibration_x);
++		__reg_write_10(mma, MMA7455L_REG_YOFFL, MMA7455L_REG_YOFFH, pdata->calibration_y);
++		__reg_write_10(mma, MMA7455L_REG_ZOFFL, MMA7455L_REG_ZOFFH, pdata->calibration_z);
++		mutex_unlock(&mma->lock);
++
++		return 0;
++	}
++
++	input_free_device(mma->input_dev);
++	return rc;
++}
++
++static int __devexit mma7455l_remove(struct spi_device *spi)
++{
++	struct mma7455l_info *mma = dev_get_drvdata(&spi->dev);
++
++        sysfs_remove_group(&spi->dev.kobj, &mma7455l_attr_group);
++	input_unregister_device(mma->input_dev);
++	dev_set_drvdata(&spi->dev, NULL);
++	kfree(mma);
++
++	return 0;
++}
++
++#ifdef CONFIG_PM
++static int mma7455l_suspend(struct spi_device *spi, pm_message_t message)
++{
++	struct mma7455l_info *mma = dev_get_drvdata(&spi->dev);
++	get_mode(mma, &mma->mode, &mma->gSelect);
++	set_mode(mma, MMA7455L_MODE_STANDBY, MMA7455L_GSELECT_2);
++
++	return 0;
++}
++
++static int mma7455l_resume(struct spi_device *spi)
++{
++	struct mma7455l_info *mma = dev_get_drvdata(&spi->dev);
++	update_mode(mma, mma->mode, mma->gSelect);
++
++	return 0;
++}
++#else
++#define mma7455l_suspend NULL
++#define mma7455l_resume  NULL
++#endif
++
++static struct spi_driver mma7455l_driver = {
++	.driver = {
++		.name	= "mma7455l",
++		.owner	= THIS_MODULE,
++	},
++
++	.probe	 = mma7455l_probe,
++	.remove	 = __devexit_p(mma7455l_remove),
++	.suspend = mma7455l_suspend,
++	.resume	 = mma7455l_resume,
++};
++
++static int __init mma7455l_init(void)
++{
++	return spi_register_driver(&mma7455l_driver);
++}
++
++static void __exit mma7455l_exit(void)
++{
++	spi_unregister_driver(&mma7455l_driver);
++}
++
++MODULE_AUTHOR("Gregoire Gentil <gregoire@gentil.com>");
++MODULE_LICENSE("GPL");
++
++module_init(mma7455l_init);
++module_exit(mma7455l_exit);
+diff --git a/include/linux/mma7455l.h b/include/linux/mma7455l.h
+new file mode 100644
+index 0000000..12ab50a
+--- /dev/null
++++ b/include/linux/mma7455l.h
+@@ -0,0 +1,11 @@
++#ifndef _LINUX_MMA7455L_H
++#define _LINUX_MMA7455L_H
++
++struct mma7455l_platform_data {
++	/* Calibration offsets */
++	s16 calibration_x;
++	s16 calibration_y;
++	s16 calibration_z;
++};
++
++#endif /* _LINUX_MMA7455L_H */
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0003-bq27x00_battery-remove-error-message-output.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0003-bq27x00_battery-remove-error-message-output.patch
new file mode 100644
index 0000000..f8b307e
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0003-bq27x00_battery-remove-error-message-output.patch
@@ -0,0 +1,53 @@
+From 6837800d92947d25e263bf041ebe7db4e804af68 Mon Sep 17 00:00:00 2001
+From: Gregoire Gentil <gregoire@gentil.com>
+Date: Fri, 12 Mar 2010 11:41:17 +0100
+Subject: [PATCH 03/17] bq27x00_battery: remove error message output
+
+---
+ drivers/power/bq27x00_battery.c |    5 -----
+ 1 files changed, 0 insertions(+), 5 deletions(-)
+
+diff --git a/drivers/power/bq27x00_battery.c b/drivers/power/bq27x00_battery.c
+index 62bb981..6935bb6 100644
+--- a/drivers/power/bq27x00_battery.c
++++ b/drivers/power/bq27x00_battery.c
+@@ -93,7 +93,6 @@ static int bq27x00_battery_temperature(struct bq27x00_device_info *di)
+ 
+ 	ret = bq27x00_read(BQ27x00_REG_TEMP, &temp, 0, di);
+ 	if (ret) {
+-		dev_err(di->dev, "error reading temperature\n");
+ 		return ret;
+ 	}
+ 
+@@ -111,7 +110,6 @@ static int bq27x00_battery_voltage(struct bq27x00_device_info *di)
+ 
+ 	ret = bq27x00_read(BQ27x00_REG_VOLT, &volt, 0, di);
+ 	if (ret) {
+-		dev_err(di->dev, "error reading voltage\n");
+ 		return ret;
+ 	}
+ 
+@@ -131,12 +129,10 @@ static int bq27x00_battery_current(struct bq27x00_device_info *di)
+ 
+ 	ret = bq27x00_read(BQ27x00_REG_AI, &curr, 0, di);
+ 	if (ret) {
+-		dev_err(di->dev, "error reading current\n");
+ 		return 0;
+ 	}
+ 	ret = bq27x00_read(BQ27x00_REG_FLAGS, &flags, 0, di);
+ 	if (ret < 0) {
+-		dev_err(di->dev, "error reading flags\n");
+ 		return 0;
+ 	}
+ 	if ((flags & (1 << 7)) != 0) {
+@@ -157,7 +153,6 @@ static int bq27x00_battery_rsoc(struct bq27x00_device_info *di)
+ 
+ 	ret = bq27x00_read(BQ27x00_REG_RSOC, &rsoc, 1, di);
+ 	if (ret) {
+-		dev_err(di->dev, "error reading relative State-of-Charge\n");
+ 		return ret;
+ 	}
+ 
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0004-bq27x00_battery-add-charged-gpio.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0004-bq27x00_battery-add-charged-gpio.patch
new file mode 100644
index 0000000..759525f
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0004-bq27x00_battery-add-charged-gpio.patch
@@ -0,0 +1,65 @@
+From 829d500667448b7ea9465615261a988adc3aa645 Mon Sep 17 00:00:00 2001
+From: Gregoire Gentil <gregoire@gentil.com>
+Date: Fri, 12 Mar 2010 11:42:45 +0100
+Subject: [PATCH 04/17] bq27x00_battery: add charged gpio
+
+---
+ drivers/power/bq27x00_battery.c |   21 +++++++++++++++++++++
+ 1 files changed, 21 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/power/bq27x00_battery.c b/drivers/power/bq27x00_battery.c
+index 6935bb6..4b80f59 100644
+--- a/drivers/power/bq27x00_battery.c
++++ b/drivers/power/bq27x00_battery.c
+@@ -28,6 +28,7 @@
+ 
+ #define DRIVER_VERSION			"1.0.0"
+ 
++#define BQ27x00_REG_MODE		0x00
+ #define BQ27x00_REG_TEMP		0x06
+ #define BQ27x00_REG_VOLT		0x08
+ #define BQ27x00_REG_RSOC		0x0B /* Relative State-of-Charge */
+@@ -65,6 +66,7 @@ static enum power_supply_property bq27x00_battery_props[] = {
+ 	POWER_SUPPLY_PROP_CURRENT_NOW,
+ 	POWER_SUPPLY_PROP_CAPACITY,
+ 	POWER_SUPPLY_PROP_TEMP,
++	POWER_SUPPLY_PROP_ONLINE,
+ };
+ 
+ /*
+@@ -83,6 +85,22 @@ static int bq27x00_read(u8 reg, int *rt_value, int b_single,
+ }
+ 
+ /*
++ * Return the GPIO status (0 or 1)
++ * Or < 0 if something fails.
++ */
++static int bq27x00_gpio(struct bq27x00_device_info *di)
++{
++	int ret;
++	int gpio = 0;
++
++	ret = bq27x00_read(BQ27x00_REG_MODE, &gpio, 0, di);
++	if (ret)
++		return ret;
++
++	return (gpio & 0x40) >> 6;
++}
++
++/*
+  * Return the battery temperature in Celsius degrees
+  * Or < 0 if something fails.
+  */
+@@ -184,6 +202,9 @@ static int bq27x00_battery_get_property(struct power_supply *psy,
+ 	case POWER_SUPPLY_PROP_TEMP:
+ 		val->intval = bq27x00_battery_temperature(di);
+ 		break;
++	case POWER_SUPPLY_PROP_ONLINE:
++		val->intval = bq27x00_gpio(di);
++		break;
+ 	default:
+ 		return -EINVAL;
+ 	}
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0005-adf7846-add-more-debugging.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0005-adf7846-add-more-debugging.patch
new file mode 100644
index 0000000..f15e0a2
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0005-adf7846-add-more-debugging.patch
@@ -0,0 +1,99 @@
+From e00ae0c0fa35b4b67bbc905581c2c7bde0e29901 Mon Sep 17 00:00:00 2001
+From: Gregoire Gentil <gregoire@gentil.com>
+Date: Fri, 12 Mar 2010 13:50:38 +0100
+Subject: [PATCH 05/17] adf7846: add more debugging
+
+---
+ drivers/input/touchscreen/ads7846.c |   73 +++++++++++++++++++++++++++++++++++
+ 1 files changed, 73 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
+index 45287ab..ebdeeeb 100644
+--- a/drivers/input/touchscreen/ads7846.c
++++ b/drivers/input/touchscreen/ads7846.c
+@@ -495,9 +495,82 @@ static ssize_t ads7846_disable_store(struct device *dev,
+ 
+ static DEVICE_ATTR(disable, 0664, ads7846_disable_show, ads7846_disable_store);
+ 
++static ssize_t show_debounce_max(struct device *dev, struct device_attribute *attr, char *buf) {
++	struct ads7846 *ts = dev_get_drvdata(dev);
++	return sprintf(buf, "%u\n", ts->debounce_max);
++}
++
++static ssize_t show_debounce_tol(struct device *dev, struct device_attribute *attr, char *buf) {
++	struct ads7846 *ts = dev_get_drvdata(dev);
++	return sprintf(buf, "%u\n", ts->debounce_tol);
++}
++
++static ssize_t show_debounce_rep(struct device *dev, struct device_attribute *attr, char *buf) {
++	struct ads7846 *ts = dev_get_drvdata(dev);
++	return sprintf(buf, "%u\n", ts->debounce_rep);
++}
++
++static ssize_t show_x_plate_ohms(struct device *dev, struct device_attribute *attr, char *buf) {
++	struct ads7846 *ts = dev_get_drvdata(dev);
++	return sprintf(buf, "%u\n", ts->x_plate_ohms);
++}
++
++static ssize_t write_debounce_max(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) {
++	struct ads7846 *ts = dev_get_drvdata(dev);
++	unsigned long i;
++
++        if (strict_strtoul(buf, 10, &i))
++		return -EINVAL;
++
++	ts->debounce_max = i;
++	return count;
++}
++
++static ssize_t write_debounce_tol(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) {
++	struct ads7846 *ts = dev_get_drvdata(dev);
++	unsigned long i;
++
++        if (strict_strtoul(buf, 10, &i))
++		return -EINVAL;
++
++	ts->debounce_tol = i;
++	return count;
++}
++
++static ssize_t write_debounce_rep(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) {
++	struct ads7846 *ts = dev_get_drvdata(dev);
++	unsigned long i;
++
++        if (strict_strtoul(buf, 10, &i))
++		return -EINVAL;
++
++	ts->debounce_rep = i;
++	return count;
++}
++
++static ssize_t write_x_plate_ohms(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) {
++	struct ads7846 *ts = dev_get_drvdata(dev);
++	unsigned long i;
++
++        if (strict_strtoul(buf, 10, &i))
++		return -EINVAL;
++
++	ts->x_plate_ohms = i;
++	return count;
++}
++
++static DEVICE_ATTR(debounce_max, S_IRUGO | S_IWUGO, show_debounce_max, write_debounce_max);
++static DEVICE_ATTR(debounce_tol, S_IRUGO | S_IWUGO, show_debounce_tol, write_debounce_tol);
++static DEVICE_ATTR(debounce_rep, S_IRUGO | S_IWUGO, show_debounce_rep, write_debounce_rep);
++static DEVICE_ATTR(x_plate_ohms, S_IRUGO | S_IWUGO, show_x_plate_ohms, write_x_plate_ohms);
++
+ static struct attribute *ads784x_attributes[] = {
+ 	&dev_attr_pen_down.attr,
+ 	&dev_attr_disable.attr,
++	&dev_attr_debounce_max.attr,
++	&dev_attr_debounce_tol.attr,
++	&dev_attr_debounce_rep.attr,
++	&dev_attr_x_plate_ohms.attr,
+ 	NULL,
+ };
+ 
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0006-ads7846-read-max-mix-x-y-from-pdata.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0006-ads7846-read-max-mix-x-y-from-pdata.patch
new file mode 100644
index 0000000..63a4ebb
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0006-ads7846-read-max-mix-x-y-from-pdata.patch
@@ -0,0 +1,35 @@
+From 5f227b8aa6083437e2907ca621159228a4a24d9a Mon Sep 17 00:00:00 2001
+From: Gregoire Gentil <gregoire@gentil.com>
+Date: Fri, 12 Mar 2010 13:50:45 +0100
+Subject: [PATCH 06/17] ads7846: read max/mix x/y from pdata
+
+---
+ drivers/input/touchscreen/ads7846.c |    5 +++--
+ 1 files changed, 3 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
+index ebdeeeb..56b0ffd 100644
+--- a/drivers/input/touchscreen/ads7846.c
++++ b/drivers/input/touchscreen/ads7846.c
+@@ -604,6 +604,7 @@ static void ads7846_rx(void *ads)
+ {
+ 	struct ads7846		*ts = ads;
+ 	struct ads7846_packet	*packet = ts->packet;
++	struct ads7846_platform_data *pdata = ts->spi->dev.platform_data;
+ 	unsigned		Rt;
+ 	u16			x, y, z1, z2;
+ 
+@@ -674,8 +675,8 @@ static void ads7846_rx(void *ads)
+ 		if (ts->swap_xy)
+ 			swap(x, y);
+ 
+-		input_report_abs(input, ABS_X, x);
+-		input_report_abs(input, ABS_Y, y);
++		input_report_abs(input, ABS_X, pdata->x_max - x + pdata->x_min);
++		input_report_abs(input, ABS_Y, pdata->y_max - y + pdata->y_min);
+ 		input_report_abs(input, ABS_PRESSURE, ts->pressure_max - Rt);
+ 
+ 		input_sync(input);
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0007-ads7846-add-settling-delay-to-pdata.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0007-ads7846-add-settling-delay-to-pdata.patch
new file mode 100644
index 0000000..a69c783
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0007-ads7846-add-settling-delay-to-pdata.patch
@@ -0,0 +1,59 @@
+From 7330c695afad64eef62c525cb8e54913265a3b39 Mon Sep 17 00:00:00 2001
+From: Gregoire Gentil <gregoire@gentil.com>
+Date: Fri, 12 Mar 2010 13:50:52 +0100
+Subject: [PATCH 07/17] ads7846: add settling delay to pdata
+
+---
+ drivers/input/touchscreen/ads7846.c |   22 ++++++++++++++++++++++
+ 1 files changed, 22 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
+index 56b0ffd..1d9f97c 100644
+--- a/drivers/input/touchscreen/ads7846.c
++++ b/drivers/input/touchscreen/ads7846.c
+@@ -515,6 +515,26 @@ static ssize_t show_x_plate_ohms(struct device *dev, struct device_attribute *at
+ 	return sprintf(buf, "%u\n", ts->x_plate_ohms);
+ }
+ 
++static ssize_t show_settle_delay_usecs(struct device *dev, struct device_attribute *attr, char *buf) {
++	struct ads7846 *ts = dev_get_drvdata(dev);
++	struct ads7846_platform_data *pdata = ts->spi->dev.platform_data;
++
++	return sprintf(buf, "%u\n", pdata->settle_delay_usecs);
++}
++
++static ssize_t write_settle_delay_usecs(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) {
++	struct ads7846 *ts = dev_get_drvdata(dev);
++	struct ads7846_platform_data *pdata = ts->spi->dev.platform_data;
++
++	unsigned long i;
++
++        if (strict_strtoul(buf, 10, &i))
++		return -EINVAL;
++
++	pdata->settle_delay_usecs = i;
++	return count;
++}
++
+ static ssize_t write_debounce_max(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) {
+ 	struct ads7846 *ts = dev_get_drvdata(dev);
+ 	unsigned long i;
+@@ -563,6 +583,7 @@ static DEVICE_ATTR(debounce_max, S_IRUGO | S_IWUGO, show_debounce_max, write_deb
+ static DEVICE_ATTR(debounce_tol, S_IRUGO | S_IWUGO, show_debounce_tol, write_debounce_tol);
+ static DEVICE_ATTR(debounce_rep, S_IRUGO | S_IWUGO, show_debounce_rep, write_debounce_rep);
+ static DEVICE_ATTR(x_plate_ohms, S_IRUGO | S_IWUGO, show_x_plate_ohms, write_x_plate_ohms);
++static DEVICE_ATTR(settle_delay_usecs, S_IRUGO | S_IWUGO, show_settle_delay_usecs, write_settle_delay_usecs);
+ 
+ static struct attribute *ads784x_attributes[] = {
+ 	&dev_attr_pen_down.attr,
+@@ -571,6 +592,7 @@ static struct attribute *ads784x_attributes[] = {
+ 	&dev_attr_debounce_tol.attr,
+ 	&dev_attr_debounce_rep.attr,
+ 	&dev_attr_x_plate_ohms.attr,
++	&dev_attr_settle_delay_usecs.attr,
+ 	NULL,
+ };
+ 
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0008-DSS2-OMAPFB-Translate-X-Y-coordinates-for-the-video-.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0008-DSS2-OMAPFB-Translate-X-Y-coordinates-for-the-video-.patch
new file mode 100644
index 0000000..5d6ff3f
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0008-DSS2-OMAPFB-Translate-X-Y-coordinates-for-the-video-.patch
@@ -0,0 +1,99 @@
+From 07396a332c4f3d6ed4ff498cb08d0338c98dc612 Mon Sep 17 00:00:00 2001
+From: Tim Yamin <plasm@roo.me.uk>
+Date: Mon, 20 Apr 2009 20:29:11 -0700
+Subject: [PATCH 08/17] DSS2: OMAPFB: Translate X/Y coordinates for the video planes when rotating.
+
+When rotating the video planes, translate the X/Y coordinates such that
+a [0,0] from userspace always maps to the correct upper left corner of
+the display. This patch assumes that you rotate plane 0 before rotating
+plane 1. Patch also corrects the scaling parameters so that the video is
+displayed in the correct orientation (vertically, instead of horizontally)
+when rotating by 90 / 270 degrees.
+
+Signed-off-by: Tim Yamin <plasm@roo.me.uk>
+---
+ drivers/video/omap2/dss/dispc.c   |   16 ++++++++++++----
+ drivers/video/omap2/dss/manager.c |    2 +-
+ drivers/video/omap2/dss/overlay.c |   19 ++++++++++++++-----
+ 3 files changed, 27 insertions(+), 10 deletions(-)
+
+diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
+index c6d5fc5..1b38c49 100644
+--- a/drivers/video/omap2/dss/dispc.c
++++ b/drivers/video/omap2/dss/dispc.c
+@@ -1685,10 +1685,18 @@ static int _dispc_setup_plane(enum omap_plane plane,
+ 	_dispc_set_pic_size(plane, width, height);
+ 
+ 	if (plane != OMAP_DSS_GFX) {
+-		_dispc_set_scaling(plane, width, height,
+-				   out_width, out_height,
+-				   ilace, five_taps, fieldmode);
+-		_dispc_set_vid_size(plane, out_width, out_height);
++		if (rotation == 1 || rotation == 3) {
++			_dispc_set_scaling(plane, width, height,
++					   out_height, out_width,
++					   ilace, five_taps, fieldmode);
++			_dispc_set_vid_size(plane, out_height, out_width);
++		} else {
++			_dispc_set_scaling(plane, width, height,
++					   out_width, out_height,
++					   ilace, five_taps, fieldmode);
++			_dispc_set_vid_size(plane, out_width, out_height);
++		}
++
+ 		_dispc_set_vid_color_conv(plane, cconv);
+ 	}
+ 
+diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c
+index 27d9c46..7c62dea 100644
+--- a/drivers/video/omap2/dss/manager.c
++++ b/drivers/video/omap2/dss/manager.c
+@@ -702,7 +702,7 @@ static int configure_overlay(enum omap_plane plane)
+ 	u16 outw, outh;
+ 	u16 x, y, w, h;
+ 	u32 paddr;
+-	int r;
++	int r, pos_x = 0, pos_y = 0;
+ 
+ 	DSSDBGF("%d", plane);
+ 
+diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c
+index b7f9a73..0bc0592 100644
+--- a/drivers/video/omap2/dss/overlay.c
++++ b/drivers/video/omap2/dss/overlay.c
+@@ -374,6 +374,20 @@ int dss_check_overlay(struct omap_overlay *ovl, struct omap_dss_device *dssdev)
+ 			outh = info->out_height;
+ 	}
+ 
++	if ((ovl->supported_modes & info->color_mode) == 0) {
++		DSSERR("overlay doesn't support mode %d\n", info->color_mode);
++		return -EINVAL;
++	}
++
++	if (ovl->id != OMAP_DSS_GFX && (info->rotation == 1 ||
++	    info->rotation == 3)) {
++		if(outw > dh || outh > dw)
++			return -EINVAL;
++
++		/* If coordinates are invalid, they will be clipped later... */
++		return 0;
++	}
++
+ 	if (dw < info->pos_x + outw) {
+ 		DSSDBG("check_overlay failed 1: %d < %d + %d\n",
+ 				dw, info->pos_x, outw);
+@@ -386,11 +400,6 @@ int dss_check_overlay(struct omap_overlay *ovl, struct omap_dss_device *dssdev)
+ 		return -EINVAL;
+ 	}
+ 
+-	if ((ovl->supported_modes & info->color_mode) == 0) {
+-		DSSERR("overlay doesn't support mode %d\n", info->color_mode);
+-		return -EINVAL;
+-	}
+-
+ 	return 0;
+ }
+ 
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0009-DSS2-Fix-scaling-checks-when-rotation-is-90-or-270-d.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0009-DSS2-Fix-scaling-checks-when-rotation-is-90-or-270-d.patch
new file mode 100644
index 0000000..5130598
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0009-DSS2-Fix-scaling-checks-when-rotation-is-90-or-270-d.patch
@@ -0,0 +1,52 @@
+From fc2e9ddb93cb026ed10900d794dd1db11191dc24 Mon Sep 17 00:00:00 2001
+From: Tim Yamin <plasm@roo.me.uk>
+Date: Fri, 12 Mar 2010 13:57:38 +0100
+Subject: [PATCH 09/17] DSS2: Fix scaling checks when rotation is 90 or 270 degrees.
+
+---
+ drivers/video/omap2/dss/dispc.c |   25 +++++++++++++++++++------
+ 1 files changed, 19 insertions(+), 6 deletions(-)
+
+diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
+index 1b38c49..d648c08 100644
+--- a/drivers/video/omap2/dss/dispc.c
++++ b/drivers/video/omap2/dss/dispc.c
+@@ -1563,16 +1563,29 @@ static int _dispc_setup_plane(enum omap_plane plane,
+ 		}
+ 	} else {
+ 		/* video plane */
+-
++		u8 error = 0;
+ 		unsigned long fclk = 0;
+ 
+-		if (out_width < width / maxdownscale ||
+-		   out_width > width * 8)
+-			return -EINVAL;
++		if(rotation == 1 || rotation == 3)
++		{
++			if (out_width < height / maxdownscale || out_width > height * 8)
++				error = 1;
++
++			if (out_height < width / maxdownscale || out_height > width * 8)
++				error = 1;
++		} else {
++			if (out_width < width / maxdownscale || out_width > width * 8)
++				error = 1;
+ 
+-		if (out_height < height / maxdownscale ||
+-		   out_height > height * 8)
++			if (out_height < height / maxdownscale || out_height > height * 8)
++				error = 1;
++		}
++
++		if(error != 0)
++		{
++			printk("DSS: Unable to down/up scale video plane\n");
+ 			return -EINVAL;
++		}
+ 
+ 		switch (color_mode) {
+ 		case OMAP_DSS_COLOR_RGBX32:
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0010-add-touchbook-hid-driver.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0010-add-touchbook-hid-driver.patch
new file mode 100644
index 0000000..aa3b359
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0010-add-touchbook-hid-driver.patch
@@ -0,0 +1,339 @@
+From 0f651f19bf9cfecbb76d6f0b251e3d8395f306b8 Mon Sep 17 00:00:00 2001
+From: Gregoire Gentil <gregoire@gentil.com>
+Date: Fri, 12 Mar 2010 14:39:07 +0100
+Subject: [PATCH 10/17] add touchbook hid driver
+
+---
+ drivers/hid/Kconfig    |    7 ++
+ drivers/hid/Makefile   |    1 +
+ drivers/hid/hid-ai.c   |  260 ++++++++++++++++++++++++++++++++++++++++++++++++
+ drivers/hid/hid-core.c |    1 +
+ drivers/hid/hid-ids.h  |    3 +
+ 5 files changed, 272 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/hid/hid-ai.c
+
+diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
+index 24d90ea..3760565 100644
+--- a/drivers/hid/Kconfig
++++ b/drivers/hid/Kconfig
+@@ -62,6 +62,13 @@ config HID_A4TECH
+ 	---help---
+ 	Support for A4 tech X5 and WOP-35 / Trust 450L mice.
+ 
++config HID_AI
++	tristate "Always Innovating" if EMBEDDED
++	depends on USB_HID
++	default !EMBEDDED
++	---help---
++	Support for Always Innovating Touch Book.
++
+ config HID_APPLE
+ 	tristate "Apple" if EMBEDDED
+ 	depends on (USB_HID || BT_HIDP)
+diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
+index 0de2dff..1787952 100644
+--- a/drivers/hid/Makefile
++++ b/drivers/hid/Makefile
+@@ -20,6 +20,7 @@ ifdef CONFIG_LOGIRUMBLEPAD2_FF
+ endif
+ 
+ obj-$(CONFIG_HID_A4TECH)	+= hid-a4tech.o
++obj-$(CONFIG_HID_AI)		+= hid-ai.o
+ obj-$(CONFIG_HID_APPLE)		+= hid-apple.o
+ obj-$(CONFIG_HID_BELKIN)	+= hid-belkin.o
+ obj-$(CONFIG_HID_CHERRY)	+= hid-cherry.o
+diff --git a/drivers/hid/hid-ai.c b/drivers/hid/hid-ai.c
+new file mode 100644
+index 0000000..83aecaf
+--- /dev/null
++++ b/drivers/hid/hid-ai.c
+@@ -0,0 +1,260 @@
++/*
++ *  USB HID quirks support for the Always Innovating Touch Book
++ *  Code borrowed from hid-apple.c
++ *
++ *  Copyright (c) 2009 Tim Yamin <plasm@roo.me.uk>
++ */
++
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the Free
++ * Software Foundation; either version 2 of the License, or (at your option)
++ * any later version.
++ */
++
++#include <linux/device.h>
++#include <linux/hid.h>
++#include <linux/module.h>
++#include <linux/usb.h>
++
++#include "hid-ids.h"
++
++struct ai_sc {
++	unsigned long quirks;
++	unsigned int  fn_on;
++	DECLARE_BITMAP(pressed_fn, KEY_CNT);
++};
++
++struct ai_key_translation {
++	u16 from;
++	u16 to;
++	u8 flags;
++};
++
++static struct ai_key_translation ai_fn_keys[] = {
++	{ KEY_F6,	KEY_BRIGHTNESSDOWN },
++	{ KEY_F7,	KEY_BRIGHTNESSUP },
++
++	{ KEY_F8,	KEY_MUTE },
++	{ KEY_F9,	KEY_VOLUMEDOWN },
++	{ KEY_F10,	KEY_VOLUMEUP },
++
++	{ KEY_UP,	KEY_PAGEUP },
++	{ KEY_DOWN,	KEY_PAGEDOWN },
++	{ }
++};
++
++extern unsigned int ai_revision;
++int swap_key = 0;
++
++static struct ai_key_translation *ai_find_translation(
++		struct ai_key_translation *table, u16 from)
++{
++	struct ai_key_translation *trans;
++
++	/* Look for the translation */
++	for (trans = table; trans->from; trans++)
++		if (trans->from == from)
++			return trans;
++
++	return NULL;
++}
++
++static int ai_event(struct hid_device *hid, struct hid_field *field,
++		struct hid_usage *usage, __s32 value)
++{
++	int do_translate;
++
++	struct input_dev *input = field->hidinput->input;
++	struct ai_sc *asc = hid_get_drvdata(hid);
++	struct ai_key_translation *trans;
++
++	if (swap_key && usage->code == KEY_RIGHTSHIFT) {
++		input_event(input, usage->type, KEY_END, value);
++		return 1;
++	}
++
++	if (swap_key && usage->code == KEY_END) {
++		input_event(input, usage->type, KEY_RIGHTSHIFT, value);
++		return 1;
++	}
++
++	if (usage->code == KEY_POWER) {
++		asc->fn_on = !!value;
++		input_event(input, usage->type, usage->code, value);
++		return 1;
++	}
++
++	trans = ai_find_translation(ai_fn_keys, usage->code);
++	if (trans) {
++		if (test_bit(usage->code, asc->pressed_fn))
++			do_translate = 1;
++		else
++			do_translate = asc->fn_on;
++
++		if (do_translate) {
++			if (value)
++				set_bit(usage->code, asc->pressed_fn);
++			else
++				clear_bit(usage->code, asc->pressed_fn);
++
++			input_event(input, usage->type, trans->to,
++					value);
++
++			return 1;
++		}
++	}
++
++	return 0;
++}
++
++static int ai_input_mapping(struct hid_device *hdev, struct hid_input *hi,
++		struct hid_field *field, struct hid_usage *usage,
++		unsigned long **bit, int *max)
++{
++	struct ai_key_translation *trans;
++
++	/* Enable all other keys */
++	for (trans = ai_fn_keys; trans->from; trans++)
++		set_bit(trans->to, hi->input->keybit);
++
++	return 0;
++}
++
++static ssize_t show_swap_key(struct device *dev,
++		struct device_attribute *attr, char *buf)
++{
++	return snprintf(buf, PAGE_SIZE, "%d\n", swap_key);
++}
++
++static ssize_t store_swap_key(struct device *dev,
++		struct device_attribute *attr,
++		const char *buf, size_t count)
++{
++	swap_key = simple_strtoul(buf, NULL, 0);
++
++	if (swap_key != 0 && swap_key != 1) {
++		swap_key = 0;
++		return -EINVAL;
++	}
++
++	return count;
++}
++
++static struct device_attribute ai_hid_attrs[] = {
++	__ATTR(swap_key, S_IRUGO | S_IWUGO, show_swap_key, store_swap_key),
++};
++
++int ai_create_sysfs(struct hid_device *hdev)
++{
++	int i;
++	int r;
++
++	for (i = 0; i < ARRAY_SIZE(ai_hid_attrs); i++) {
++		r = device_create_file(&hdev->dev,
++				&ai_hid_attrs[i]);
++
++		if (r) {
++			dev_err(&hdev->dev, "failed to create sysfs file\n");
++			return r;
++		}
++	}
++
++	return 0;
++}
++
++void ai_remove_sysfs(struct hid_device *hdev)
++{
++	int i;
++
++	for (i = 0; i < ARRAY_SIZE(ai_hid_attrs); i++)
++		device_remove_file(&hdev->dev,
++					&ai_hid_attrs[i]);
++}
++
++static int ai_probe(struct hid_device *hdev,
++		const struct hid_device_id *id)
++{
++	unsigned long quirks = id->driver_data;
++	struct ai_sc *asc;
++	unsigned int connect_mask = HID_CONNECT_DEFAULT;
++	int ret;
++
++	asc = kzalloc(sizeof(*asc), GFP_KERNEL);
++	if (asc == NULL) {
++		dev_err(&hdev->dev, "can't alloc ai descriptor\n");
++		return -ENOMEM;
++	}
++
++	asc->quirks = quirks;
++	hid_set_drvdata(hdev, asc);
++
++	ret = hid_parse(hdev);
++	if (ret) {
++		dev_err(&hdev->dev, "parse failed\n");
++		goto err_free;
++	}
++
++	ret = ai_create_sysfs(hdev);
++	if (ret) {
++		dev_err(&hdev->dev, "failed to create sysfs entries\n");
++		goto err_free;
++	}
++
++	swap_key = (ai_revision >= 4) ? 1 : 0;
++
++	ret = hid_hw_start(hdev, connect_mask);
++	if (ret) {
++		dev_err(&hdev->dev, "hw start failed\n");
++		goto err_free;
++	}
++
++	return 0;
++err_free:
++	kfree(asc);
++	return ret;
++}
++
++static void ai_remove(struct hid_device *hdev)
++{
++	hid_hw_stop(hdev);
++	kfree(hid_get_drvdata(hdev));
++	ai_remove_sysfs(hdev);
++}
++
++static const struct hid_device_id ai_devices[] = {
++	{ HID_USB_DEVICE(USB_VENDOR_ID_AI, USB_DEVICE_ID_AI_TOUCH_BOOK) },
++	{ }
++};
++
++MODULE_DEVICE_TABLE(hid, ai_devices);
++
++static struct hid_driver ai_driver = {
++	.name = "ai",
++	.id_table = ai_devices,
++	.probe = ai_probe,
++	.remove = ai_remove,
++	.event = ai_event,
++	.input_mapping = ai_input_mapping,
++};
++
++static int ai_init(void)
++{
++	int ret;
++
++	ret = hid_register_driver(&ai_driver);
++	if (ret)
++		printk(KERN_ERR "can't register ai driver\n");
++
++	return ret;
++}
++
++static void ai_exit(void)
++{
++	hid_unregister_driver(&ai_driver);
++}
++
++module_init(ai_init);
++module_exit(ai_exit);
++MODULE_LICENSE("GPL");
++HID_COMPAT_LOAD_DRIVER(ai);
+diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
+index 80792d3..f6b5960 100644
+--- a/drivers/hid/hid-core.c
++++ b/drivers/hid/hid-core.c
+@@ -1250,6 +1250,7 @@ EXPORT_SYMBOL_GPL(hid_disconnect);
+ static const struct hid_device_id hid_blacklist[] = {
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU) },
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_X5_005D) },
++	{ HID_USB_DEVICE(USB_VENDOR_ID_AI, USB_DEVICE_ID_AI_TOUCH_BOOK) },
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ATV_IRCONTROL) },
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL4) },
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE) },
+diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
+index 3839340..5a0127d 100644
+--- a/drivers/hid/hid-ids.h
++++ b/drivers/hid/hid-ids.h
+@@ -54,6 +54,9 @@
+ #define USB_VENDOR_ID_ALPS		0x0433
+ #define USB_DEVICE_ID_IBM_GAMEPAD	0x1101
+ 
++#define USB_VENDOR_ID_AI		0xa110
++#define USB_DEVICE_ID_AI_TOUCH_BOOK	0x0002
++
+ #define USB_VENDOR_ID_APPLE		0x05ac
+ #define USB_DEVICE_ID_APPLE_MIGHTYMOUSE	0x0304
+ #define USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI	0x020e
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0011-Make-backlight-controls-accessible-to-users.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0011-Make-backlight-controls-accessible-to-users.patch
new file mode 100644
index 0000000..c6d3678
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0011-Make-backlight-controls-accessible-to-users.patch
@@ -0,0 +1,25 @@
+From b46a494e0c02450e412db221d75446671b6ef511 Mon Sep 17 00:00:00 2001
+From: Gregoire Gentil <gregroire@gentil.com>
+Date: Fri, 12 Mar 2010 14:41:05 +0100
+Subject: [PATCH 11/17] Make backlight controls accessible to users
+
+---
+ drivers/video/backlight/backlight.c |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c
+index 6615ac7..7898707 100644
+--- a/drivers/video/backlight/backlight.c
++++ b/drivers/video/backlight/backlight.c
+@@ -228,7 +228,7 @@ static void bl_device_release(struct device *dev)
+ 
+ static struct device_attribute bl_device_attributes[] = {
+ 	__ATTR(bl_power, 0644, backlight_show_power, backlight_store_power),
+-	__ATTR(brightness, 0644, backlight_show_brightness,
++	__ATTR(brightness, 0666, backlight_show_brightness,
+ 		     backlight_store_brightness),
+ 	__ATTR(actual_brightness, 0444, backlight_show_actual_brightness,
+ 		     NULL),
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0012-ads7846-don-t-error-out-when-there-s-no-pendown-gpio.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0012-ads7846-don-t-error-out-when-there-s-no-pendown-gpio.patch
new file mode 100644
index 0000000..24fb913
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0012-ads7846-don-t-error-out-when-there-s-no-pendown-gpio.patch
@@ -0,0 +1,30 @@
+From 4c3ef06a333cf1f873a9a8de05af90959a5d1e68 Mon Sep 17 00:00:00 2001
+From: Gregoire Gentil <gregoire@gentil.com>
+Date: Fri, 12 Mar 2010 15:04:58 +0100
+Subject: [PATCH 12/17] ads7846: don't error out when there's no pendown gpio
+
+---
+ drivers/input/touchscreen/ads7846.c |    7 -------
+ 1 files changed, 0 insertions(+), 7 deletions(-)
+
+diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
+index 1d9f97c..c72c3ae 100644
+--- a/drivers/input/touchscreen/ads7846.c
++++ b/drivers/input/touchscreen/ads7846.c
+@@ -952,13 +952,6 @@ static int __devinit setup_pendown(struct spi_device *spi, struct ads7846 *ts)
+ 		return 0;
+ 	}
+ 
+-	err = gpio_request(pdata->gpio_pendown, "ads7846_pendown");
+-	if (err) {
+-		dev_err(&spi->dev, "failed to request pendown GPIO%d\n",
+-				pdata->gpio_pendown);
+-		return err;
+-	}
+-
+ 	ts->gpio_pendown = pdata->gpio_pendown;
+ 	return 0;
+ }
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0013-ASoC-add-driver-for-omap3-touchbook.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0013-ASoC-add-driver-for-omap3-touchbook.patch
new file mode 100644
index 0000000..2da7354
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0013-ASoC-add-driver-for-omap3-touchbook.patch
@@ -0,0 +1,350 @@
+From 96ce6261efe4c194d9188e0f352803bcd92f1c59 Mon Sep 17 00:00:00 2001
+From: Gregoire Gentil <gregoire@gentil.com>
+Date: Wed, 31 Mar 2010 11:14:04 +0200
+Subject: [PATCH 13/17] ASoC: add driver for omap3-touchbook
+
+---
+ sound/soc/omap/Kconfig          |    8 +
+ sound/soc/omap/Makefile         |    2 +
+ sound/soc/omap/omap3touchbook.c |  291 +++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 301 insertions(+), 0 deletions(-)
+ create mode 100644 sound/soc/omap/omap3touchbook.c
+
+diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig
+index 61952aa..a7c06ab 100644
+--- a/sound/soc/omap/Kconfig
++++ b/sound/soc/omap/Kconfig
+@@ -101,6 +101,14 @@ config SND_OMAP_SOC_OMAP3_BEAGLE
+ 	help
+ 	  Say Y if you want to add support for SoC audio on the Beagleboard.
+ 
++config SND_OMAP_SOC_OMAP3_TOUCHBOOK
++	tristate "SoC Audio support for OMAP3 Touch Book"
++	depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3_TOUCHBOOK
++	select SND_OMAP_SOC_MCBSP
++	select SND_SOC_TWL4030
++	help
++	  Say Y if you want to add support for SoC audio on the Touch Book.
++
+ config SND_OMAP_SOC_ZOOM2
+ 	tristate "SoC Audio support for Zoom2"
+ 	depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP_ZOOM2
+diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile
+index 19283e5..e3f172f 100644
+--- a/sound/soc/omap/Makefile
++++ b/sound/soc/omap/Makefile
+@@ -16,6 +16,7 @@ snd-soc-am3517evm-objs := am3517evm.o
+ snd-soc-sdp3430-objs := sdp3430.o
+ snd-soc-omap3pandora-objs := omap3pandora.o
+ snd-soc-omap3beagle-objs := omap3beagle.o
++snd-soc-omap3touchbook-objs := omap3touchbook.o
+ snd-soc-zoom2-objs := zoom2.o
+ snd-soc-igep0020-objs := igep0020.o
+ 
+@@ -29,5 +30,6 @@ obj-$(CONFIG_SND_OMAP_SOC_AM3517EVM) += snd-soc-am3517evm.o
+ obj-$(CONFIG_SND_OMAP_SOC_SDP3430) += snd-soc-sdp3430.o
+ obj-$(CONFIG_SND_OMAP_SOC_OMAP3_PANDORA) += snd-soc-omap3pandora.o
+ obj-$(CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE) += snd-soc-omap3beagle.o
++obj-$(CONFIG_SND_OMAP_SOC_OMAP3_TOUCHBOOK) += snd-soc-omap3touchbook.o
+ obj-$(CONFIG_SND_OMAP_SOC_ZOOM2) += snd-soc-zoom2.o
+ obj-$(CONFIG_SND_OMAP_SOC_IGEP0020) += snd-soc-igep0020.o
+diff --git a/sound/soc/omap/omap3touchbook.c b/sound/soc/omap/omap3touchbook.c
+new file mode 100644
+index 0000000..c5e6eaa
+--- /dev/null
++++ b/sound/soc/omap/omap3touchbook.c
+@@ -0,0 +1,291 @@
++/*
++ * omap3touchbook.c  --  SoC audio for Touch Book
++ *
++ * Copyright (C) 2009-2010 Always Innovating
++ *
++ * Author: Gregoire Gentil <gregoire@gentil.com>
++ *
++ * Based on:
++ * Author: Steve Sakoman <steve@sakoman.com>
++ * Author: Misael Lopez Cruz <x0052729@ti.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
++ * 02110-1301 USA
++ *
++ */
++
++#include <linux/clk.h>
++#include <linux/platform_device.h>
++#include <linux/i2c/twl.h>
++#include <sound/core.h>
++#include <sound/pcm.h>
++#include <sound/soc.h>
++#include <sound/soc-dapm.h>
++#include <sound/jack.h>
++
++#include <asm/mach-types.h>
++#include <mach/hardware.h>
++#include <mach/gpio.h>
++#include <plat/mcbsp.h>
++
++#include "omap-mcbsp.h"
++#include "omap-pcm.h"
++#include "../codecs/twl4030.h"
++
++static struct snd_soc_card snd_soc_omap3touchbook;
++
++static int omap3touchbook_hw_params(struct snd_pcm_substream *substream,
++	struct snd_pcm_hw_params *params)
++{
++	struct snd_soc_pcm_runtime *rtd = substream->private_data;
++	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
++	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
++	unsigned int fmt;
++	int ret;
++
++	switch (params_channels(params)) {
++	case 2: /* Stereo I2S mode */
++		fmt =	SND_SOC_DAIFMT_I2S |
++			SND_SOC_DAIFMT_NB_NF |
++			SND_SOC_DAIFMT_CBM_CFM;
++		break;
++	case 4: /* Four channel TDM mode */
++		fmt =	SND_SOC_DAIFMT_DSP_A |
++			SND_SOC_DAIFMT_IB_NF |
++			SND_SOC_DAIFMT_CBM_CFM;
++		break;
++	default:
++		return -EINVAL;
++	}
++
++	/* Set codec DAI configuration */
++	ret = snd_soc_dai_set_fmt(codec_dai, fmt);
++	if (ret < 0) {
++		printk(KERN_ERR "can't set codec DAI configuration\n");
++		return ret;
++	}
++
++	/* Set cpu DAI configuration */
++	ret = snd_soc_dai_set_fmt(cpu_dai, fmt);
++	if (ret < 0) {
++		printk(KERN_ERR "can't set cpu DAI configuration\n");
++		return ret;
++	}
++
++	/* Set the codec system clock for DAC and ADC */
++	ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000,
++				     SND_SOC_CLOCK_IN);
++	if (ret < 0) {
++		printk(KERN_ERR "can't set codec system clock\n");
++		return ret;
++	}
++
++	return 0;
++}
++
++static struct snd_soc_ops omap3touchbook_ops = {
++	.hw_params = omap3touchbook_hw_params,
++};
++
++/* Headset jack */
++static struct snd_soc_jack hs_jack;
++
++/* Headset jack detection DAPM pins */
++static struct snd_soc_jack_pin hs_jack_pins[] = {
++	{
++		.pin = "Headset Stereo",
++		.mask = SND_JACK_HEADPHONE,
++	},
++	{
++		.pin = "Headset Mic",
++		.mask = SND_JACK_HEADPHONE,
++	},
++	{
++		.pin = "External Speakers",
++		.mask = SND_JACK_HEADPHONE,
++		.invert = 1,
++	},
++};
++
++/* Headset jack detection gpios */
++static struct snd_soc_jack_gpio hs_jack_gpios[] = {
++	{
++		.gpio = 56,
++		.name = "hsdet-gpio",
++		.report = SND_JACK_HEADSET,
++		.debounce_time = 200,
++	},
++};
++
++/* omap3touchbook machine DAPM */
++static const struct snd_soc_dapm_widget omap3touchbook_twl4030_dapm_widgets[] = {
++	SND_SOC_DAPM_SPK("External Speakers", NULL),
++	SND_SOC_DAPM_HP("Headset Stereo", NULL),
++	SND_SOC_DAPM_MIC("Headset Mic", NULL),
++	SND_SOC_DAPM_LINE("Line In", NULL),
++};
++
++static const struct snd_soc_dapm_route audio_map[] = {
++	/* External Speakers: HFL, HFR */
++	{"External Speakers", NULL, "HFL"},
++	{"External Speakers", NULL, "HFR"},
++
++	/* Headset Stereo: HSOL, HSOR */
++	{"Headset Stereo", NULL, "HSOL"},
++	{"Headset Stereo", NULL, "HSOR"},
++
++	/* Micro: HSMIC */
++	{"HSMIC", NULL, "Headset Mic Bias"},
++	{"Headset Mic Bias", NULL, "Headset Mic"},
++
++	/* Line In: AUXL, AUXR */
++	{"AUXL", NULL, "Line In"},
++	{"AUXR", NULL, "Line In"},
++};
++
++static int omap3touchbook_twl4030_init(struct snd_soc_codec *codec)
++{
++	int ret;
++
++	/* Add omap3touchbook specific widgets */
++	ret = snd_soc_dapm_new_controls(codec, omap3touchbook_twl4030_dapm_widgets,
++				ARRAY_SIZE(omap3touchbook_twl4030_dapm_widgets));
++	if (ret)
++		return ret;
++
++	/* Set up omap3touchbook specific audio path audio_map */
++	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
++
++	/* omap3touchbook connected pins */
++	snd_soc_dapm_enable_pin(codec, "External Speakers");
++	snd_soc_dapm_enable_pin(codec, "Headset Stereo");
++	snd_soc_dapm_enable_pin(codec, "Headset Mic");
++	snd_soc_dapm_enable_pin(codec, "Line In");
++
++	/* omap3touchbook not connected pins */
++	snd_soc_dapm_nc_pin(codec, "CARKITMIC");
++	snd_soc_dapm_nc_pin(codec, "MAINMIC");
++	snd_soc_dapm_nc_pin(codec, "SUBMIC");
++	snd_soc_dapm_nc_pin(codec, "DIGIMIC0");
++	snd_soc_dapm_nc_pin(codec, "DIGIMIC1");
++	snd_soc_dapm_nc_pin(codec, "OUTL");
++	snd_soc_dapm_nc_pin(codec, "OUTR");
++	snd_soc_dapm_nc_pin(codec, "EARPIECE");
++	snd_soc_dapm_nc_pin(codec, "PREDRIVEL");
++	snd_soc_dapm_nc_pin(codec, "PREDRIVER");
++	snd_soc_dapm_nc_pin(codec, "CARKITL");
++	snd_soc_dapm_nc_pin(codec, "CARKITR");
++	snd_soc_dapm_nc_pin(codec, "VIBRA");
++
++	ret = snd_soc_dapm_sync(codec);
++	if (ret)
++		return ret;
++
++	/* Headset jack detection */
++	ret = snd_soc_jack_new(&snd_soc_omap3touchbook, "Headset Jack",
++				SND_JACK_HEADSET, &hs_jack);
++	if (ret)
++		return ret;
++
++	ret = snd_soc_jack_add_pins(&hs_jack, ARRAY_SIZE(hs_jack_pins),
++				hs_jack_pins);
++	if (ret)
++		return ret;
++
++	ret = snd_soc_jack_add_gpios(&hs_jack, ARRAY_SIZE(hs_jack_gpios),
++				hs_jack_gpios);
++
++	return ret;
++}
++
++/* Digital audio interface glue - connects codec <--> CPU */
++static struct snd_soc_dai_link omap3touchbook_dai = {
++		.name = "TWL4030 I2S",
++		.stream_name = "TWL4030 Audio",
++		.cpu_dai = &omap_mcbsp_dai[0],
++		.codec_dai = &twl4030_dai[TWL4030_DAI_HIFI],
++		.init = omap3touchbook_twl4030_init,
++		.ops = &omap3touchbook_ops,
++};
++
++/* Audio machine driver */
++static struct snd_soc_card snd_soc_omap3touchbook = {
++	.name = "omap3touchbook",
++	.platform = &omap_soc_platform,
++	.dai_link = &omap3touchbook_dai,
++	.num_links = 1,
++};
++
++/* twl4030 setup */
++static struct twl4030_setup_data twl4030_setup = {
++	.ramp_delay_value = 3,
++	.sysclk = 26000,
++	.hs_extmute = 1,
++};
++
++/* Audio subsystem */
++static struct snd_soc_device omap3touchbook_snd_devdata = {
++	.card = &snd_soc_omap3touchbook,
++	.codec_dev = &soc_codec_dev_twl4030,
++	.codec_data = &twl4030_setup,
++};
++
++static struct platform_device *omap3touchbook_snd_device;
++
++static int __init omap3touchbook_soc_init(void)
++{
++	int ret;
++	u8 pin_mux;
++
++	if (!machine_is_touchbook()) {
++		pr_debug("Not Touch Book!\n");
++		//return -ENODEV;
++	}
++	printk(KERN_INFO "Touch Book SoC init\n");
++
++	omap3touchbook_snd_device = platform_device_alloc("soc-audio", -1);
++	if (!omap3touchbook_snd_device) {
++		printk(KERN_ERR "Platform device allocation failed\n");
++		return -ENOMEM;
++	}
++
++	platform_set_drvdata(omap3touchbook_snd_device, &omap3touchbook_snd_devdata);
++	omap3touchbook_snd_devdata.dev = &omap3touchbook_snd_device->dev;
++	*(unsigned int *)omap3touchbook_dai.cpu_dai->private_data = 1; /* McBSP2 */
++
++	ret = platform_device_add(omap3touchbook_snd_device);
++	if (ret)
++		goto err1;
++
++	return 0;
++
++err1:
++	printk(KERN_ERR "Unable to add platform device\n");
++	platform_device_put(omap3touchbook_snd_device);
++
++	return ret;
++}
++module_init(omap3touchbook_soc_init);
++
++static void __exit omap3touchbook_soc_exit(void)
++{
++	snd_soc_jack_free_gpios(&hs_jack, ARRAY_SIZE(hs_jack_gpios),
++				hs_jack_gpios);
++
++	platform_device_unregister(omap3touchbook_snd_device);
++}
++module_exit(omap3touchbook_soc_exit);
++
++MODULE_AUTHOR("Gregoire Gentil <gregoire@gentil.com>");
++MODULE_LICENSE("GPL");
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0014-backlight-add-PWM-support.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0014-backlight-add-PWM-support.patch
new file mode 100644
index 0000000..d517f07
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0014-backlight-add-PWM-support.patch
@@ -0,0 +1,126 @@
+From cc8cb0d0731c7a0517653e65c754051a69f34c3e Mon Sep 17 00:00:00 2001
+From: Gregoire Gentil <gregoire@gentil.com>
+Date: Wed, 31 Mar 2010 11:14:04 +0200
+Subject: [PATCH 14/17] backlight: add PWM support
+
+---
+ drivers/video/backlight/backlight.c |   81 +++++++++++++++++++++++++++++++++++
+ include/linux/backlight.h           |    3 +
+ 2 files changed, 84 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c
+index 7898707..615f40f 100644
+--- a/drivers/video/backlight/backlight.c
++++ b/drivers/video/backlight/backlight.c
+@@ -226,6 +226,84 @@ static void bl_device_release(struct device *dev)
+ 	kfree(bd);
+ }
+ 
++static ssize_t backlight_show_boost(struct device *dev, struct device_attribute *attr, char *buf)
++{
++	struct backlight_device *bd = to_backlight_device(dev);
++	return sprintf(buf, "%u\n", bd->props.boost);
++}
++
++static ssize_t backlight_store_boost(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
++{
++	unsigned long i;
++	struct backlight_device *bd = to_backlight_device(dev);
++
++        if (strict_strtoul(buf, 10, &i))
++		return -EINVAL;
++
++	mutex_lock(&bd->ops_lock);
++	if (bd->ops)
++	{
++		if (i)
++			bd->props.boost = 1;
++		else
++			bd->props.boost = 0;
++		backlight_update_status(bd);
++	}
++	mutex_unlock(&bd->ops_lock);
++
++	return count;
++}
++
++static ssize_t backlight_show_pwm_fq(struct device *dev, struct device_attribute *attr, char *buf)
++{
++	struct backlight_device *bd = to_backlight_device(dev);
++	return sprintf(buf, "%u\n", bd->props.pwm_fq);
++}
++
++static ssize_t backlight_store_pwm_fq(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
++{
++	unsigned long i;
++	struct backlight_device *bd = to_backlight_device(dev);
++
++        if (strict_strtoul(buf, 10, &i))
++		return -EINVAL;
++
++	mutex_lock(&bd->ops_lock);
++	if (bd->ops)
++	{
++		bd->props.pwm_fq = i;
++		backlight_update_status(bd);
++	}
++	mutex_unlock(&bd->ops_lock);
++
++	return count;
++}
++
++static ssize_t backlight_show_min_duty(struct device *dev, struct device_attribute *attr, char *buf)
++{
++	struct backlight_device *bd = to_backlight_device(dev);
++	return sprintf(buf, "%u\n", bd->props.min_duty);
++}
++
++static ssize_t backlight_store_min_duty(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
++{
++	unsigned long i;
++	struct backlight_device *bd = to_backlight_device(dev);
++
++        if (strict_strtoul(buf, 10, &i))
++		return -EINVAL;
++
++	mutex_lock(&bd->ops_lock);
++	if (bd->ops)
++	{
++		bd->props.min_duty = i;
++		backlight_update_status(bd);
++	}
++	mutex_unlock(&bd->ops_lock);
++
++	return count;
++}
++
+ static struct device_attribute bl_device_attributes[] = {
+ 	__ATTR(bl_power, 0644, backlight_show_power, backlight_store_power),
+ 	__ATTR(brightness, 0666, backlight_show_brightness,
+@@ -233,6 +311,9 @@ static struct device_attribute bl_device_attributes[] = {
+ 	__ATTR(actual_brightness, 0444, backlight_show_actual_brightness,
+ 		     NULL),
+ 	__ATTR(max_brightness, 0444, backlight_show_max_brightness, NULL),
++	__ATTR(boost, 0666, backlight_show_boost, backlight_store_boost),
++	__ATTR(pwm_fq, 0666, backlight_show_pwm_fq, backlight_store_pwm_fq),
++	__ATTR(min_duty, 0666, backlight_show_min_duty, backlight_store_min_duty),
+ 	__ATTR_NULL,
+ };
+ 
+diff --git a/include/linux/backlight.h b/include/linux/backlight.h
+index 0f5f578..f3a9b9f 100644
+--- a/include/linux/backlight.h
++++ b/include/linux/backlight.h
+@@ -64,6 +64,9 @@ struct backlight_properties {
+ 	int fb_blank;
+ 	/* Flags used to signal drivers of state changes */
+ 	/* Upper 4 bits are reserved for driver internal use */
++	int boost;
++	int pwm_fq;
++	int min_duty;
+ 	unsigned int state;
+ 
+ #define BL_CORE_SUSPENDED	(1 << 0)	/* backlight is suspended */
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0015-Forward-port-TWL4030-BCI-driver-from-2.6.29-to-2.6.3.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0015-Forward-port-TWL4030-BCI-driver-from-2.6.29-to-2.6.3.patch
new file mode 100644
index 0000000..562c459
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0015-Forward-port-TWL4030-BCI-driver-from-2.6.29-to-2.6.3.patch
@@ -0,0 +1,1367 @@
+From c3a08f3d696866508ef2b5e2fd065b8295b3e1a8 Mon Sep 17 00:00:00 2001
+From: Tim Yamin <plasm@roo.me.uk>
+Date: Sun, 9 May 2010 10:14:23 +0200
+Subject: [PATCH 15/17] Forward port TWL4030 BCI driver from 2.6.29 to 2.6.31 with AI enhancements.
+
+Signed-off-by: Tim Yamin <plasm@roo.me.uk>
+---
+ drivers/power/Kconfig               |    7 +
+ drivers/power/Makefile              |    1 +
+ drivers/power/twl4030_bci_battery.c | 1307 +++++++++++++++++++++++++++++++++++
+ include/linux/i2c/twl.h             |    1 +
+ 4 files changed, 1316 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/power/twl4030_bci_battery.c
+
+diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
+index d4b3d67..8345b3f 100644
+--- a/drivers/power/Kconfig
++++ b/drivers/power/Kconfig
+@@ -124,4 +124,11 @@ config CHARGER_PCF50633
+ 	help
+ 	 Say Y to include support for NXP PCF50633 Main Battery Charger.
+ 
++config TWL4030_BCI_BATTERY
++	tristate "OMAP TWL4030 BCI Battery driver"
++	depends on TWL4030_CORE && TWL4030_MADC
++	help
++	  Support for OMAP TWL4030 BCI Battery driver.
++	  This driver can give support for TWL4030 Battery Charge Interface.
++
+ endif # POWER_SUPPLY
+diff --git a/drivers/power/Makefile b/drivers/power/Makefile
+index 573597c..7801da7 100644
+--- a/drivers/power/Makefile
++++ b/drivers/power/Makefile
+@@ -31,3 +31,4 @@ obj-$(CONFIG_BATTERY_BQ27x00)	+= bq27x00_battery.o
+ obj-$(CONFIG_BATTERY_DA9030)	+= da9030_battery.o
+ obj-$(CONFIG_BATTERY_MAX17040)	+= max17040_battery.o
+ obj-$(CONFIG_CHARGER_PCF50633)	+= pcf50633-charger.o
++obj-$(CONFIG_TWL4030_BCI_BATTERY)	+= twl4030_bci_battery.o
+diff --git a/drivers/power/twl4030_bci_battery.c b/drivers/power/twl4030_bci_battery.c
+new file mode 100644
+index 0000000..0876fc3
+--- /dev/null
++++ b/drivers/power/twl4030_bci_battery.c
+@@ -0,0 +1,1307 @@
++/*
++ * linux/drivers/power/twl4030_bci_battery.c
++ *
++ * OMAP2430/3430 BCI battery driver for Linux
++ *
++ * Copyright (C) 2008 Texas Instruments, Inc.
++ * Author: Texas Instruments, Inc.
++ *
++ * Copyright (C) 2010 Always Innovating
++ * Author: Tim Yamin <plasm@roo.me.uk>
++ *
++ * This package is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
++ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
++ */
++
++/* Boot with automatic charge */
++#define CHARGE_MODE 1
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/device.h>
++#include <linux/interrupt.h>
++#include <linux/delay.h>
++#include <linux/platform_device.h>
++#include <linux/i2c/twl.h>
++#include <linux/power_supply.h>
++#include <linux/i2c/twl4030-madc.h>
++
++#define T2_BATTERY_VOLT		0x04
++#define T2_BATTERY_TEMP		0x06
++#define T2_BATTERY_CUR		0x08
++
++/* charger constants */
++#define NO_PW_CONN		0
++#define AC_PW_CONN		0x01
++#define USB_PW_CONN		0x02
++
++/* TWL4030_MODULE_USB */
++#define REG_POWER_CTRL		0x0AC
++#define OTG_EN			0x020
++#define REG_PHY_CLK_CTRL	0x0FE
++#define REG_PHY_CLK_CTRL_STS	0x0FF
++#define PHY_DPLL_CLK		0x01
++
++#define REG_BCICTL1		0x023
++#define REG_BCICTL2		0x024
++#define CGAIN			0x020
++#define ITHEN			0x010
++#define ITHSENS			0x007
++
++/* Boot BCI flag bits */
++#define BCIAUTOWEN		0x020
++#define CONFIG_DONE		0x010
++#define CVENAC			0x004
++#define BCIAUTOUSB		0x002
++#define BCIAUTOAC		0x001
++#define BCIMSTAT_MASK		0x03F
++
++/* Boot BCI register */
++#define REG_BOOT_BCI		0x007
++#define REG_CTRL1		0x00
++#define REG_SW1SELECT_MSB	0x07
++#define SW1_CH9_SEL		0x02
++#define REG_CTRL_SW1		0x012
++#define SW1_TRIGGER		0x020
++#define EOC_SW1			0x002
++#define REG_GPCH9		0x049
++#define REG_STS_HW_CONDITIONS	0x0F
++#define STS_VBUS		0x080
++#define STS_CHG			0x02
++#define REG_BCIMSTATEC		0x02
++#define REG_BCIMFSTS4		0x010
++#define REG_BCIMFSTS2		0x00E
++#define REG_BCIMFSTS3		0x00F
++#define REG_BCIMFSTS1		0x001
++#define USBFASTMCHG		0x004
++#define BATSTSPCHG		0x004
++#define BATSTSMCHG		0x040
++#define VBATOV4			0x020
++#define VBATOV3			0x010
++#define VBATOV2			0x008
++#define VBATOV1			0x004
++#define REG_BB_CFG		0x012
++#define BBCHEN			0x010
++
++/* GPBR */
++#define REG_GPBR1		0x0c
++#define MADC_HFCLK_EN		0x80
++#define DEFAULT_MADC_CLK_EN	0x10
++
++/* Power supply charge interrupt */
++#define REG_PWR_ISR1		0x00
++#define REG_PWR_IMR1		0x01
++#define REG_PWR_EDR1		0x05
++#define REG_PWR_SIH_CTRL	0x007
++
++#define USB_PRES		0x004
++#define CHG_PRES		0x002
++
++#define USB_PRES_RISING		0x020
++#define USB_PRES_FALLING	0x010
++#define CHG_PRES_RISING		0x008
++#define CHG_PRES_FALLING	0x004
++#define AC_STATEC		0x20
++#define COR			0x004
++
++/* interrupt status registers */
++#define REG_BCIISR1A		0x0
++#define REG_BCIISR2A		0x01
++
++/* Interrupt flags bits BCIISR1 */
++#define BATSTS_ISR1		0x080
++#define VBATLVL_ISR1		0x001
++
++/* Interrupt mask registers for int1*/
++#define REG_BCIIMR1A		0x002
++#define REG_BCIIMR2A		0x003
++
++ /* Interrupt masks for BCIIMR1 */
++#define BATSTS_IMR1		0x080
++#define VBATLVL_IMR1		0x001
++
++/* Interrupt edge detection register */
++#define REG_BCIEDR1		0x00A
++#define REG_BCIEDR2		0x00B
++#define REG_BCIEDR3		0x00C
++
++/* BCIEDR2 */
++#define	BATSTS_EDRRISIN		0x080
++#define BATSTS_EDRFALLING	0x040
++
++/* BCIEDR3 */
++#define	VBATLVL_EDRRISIN	0x02
++
++/* BCIIREF1 */
++#define REG_BCIIREF1		0x027
++#define REG_BCIIREF2		0x028
++
++/* BCIMFTH1 */
++#define REG_BCIMFTH1		0x016
++
++/* Key */
++#define KEY_IIREF		0xE7
++#define KEY_FTH1		0xD2
++#define REG_BCIMFKEY		0x011
++
++/* Step size and prescaler ratio */
++#define TEMP_STEP_SIZE		147
++#define TEMP_PSR_R		100
++
++#define VOLT_STEP_SIZE		588
++#define VOLT_PSR_R		100
++
++#define CURR_STEP_SIZE		147
++#define CURR_PSR_R1		44
++#define CURR_PSR_R2		80
++
++#define BK_VOLT_STEP_SIZE	441
++#define BK_VOLT_PSR_R		100
++
++#define ENABLE		1
++#define DISABLE		1
++
++struct twl4030_bci_device_info {
++	struct device		*dev;
++
++	unsigned long		update_time;
++	int			voltage_uV;
++	int			bk_voltage_uV;
++	int			current_uA;
++	int			temp_C;
++	int			charge_rsoc;
++	int			charge_status;
++
++	struct power_supply	bat;
++	struct power_supply	bk_bat;
++	struct delayed_work	twl4030_bci_monitor_work;
++	struct delayed_work	twl4030_bk_bci_monitor_work;
++
++	struct twl4030_bci_platform_data *pdata;
++};
++
++static int usb_charger_flag;
++static int LVL_1, LVL_2, LVL_3, LVL_4;
++
++static int read_bci_val(u8 reg_1);
++static inline int clear_n_set(u8 mod_no, u8 clear, u8 set, u8 reg);
++static int twl4030charger_presence(void);
++
++/*
++ * Report and clear the charger presence event.
++ */
++static inline int twl4030charger_presence_evt(void)
++{
++	int ret;
++	u8 chg_sts, set = 0, clear = 0;
++
++	/* read charger power supply status */
++	ret = twl_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &chg_sts,
++		REG_STS_HW_CONDITIONS);
++	if (ret)
++		return IRQ_NONE;
++
++	if (chg_sts & STS_CHG) { /* If the AC charger have been connected */
++		/* configuring falling edge detection for CHG_PRES */
++		set = CHG_PRES_FALLING;
++		clear = CHG_PRES_RISING;
++	} else { /* If the AC charger have been disconnected */
++		/* configuring rising edge detection for CHG_PRES */
++		set = CHG_PRES_RISING;
++		clear = CHG_PRES_FALLING;
++	}
++
++	/* Update the interrupt edge detection register */
++	clear_n_set(TWL4030_MODULE_INT, clear, set, REG_PWR_EDR1);
++
++	return 0;
++}
++
++/*
++ * Interrupt service routine
++ *
++ * Attends to TWL 4030 power module interruptions events, specifically
++ * USB_PRES (USB charger presence) CHG_PRES (AC charger presence) events
++ *
++ */
++static irqreturn_t twl4030charger_interrupt(int irq, void *_di)
++{
++	struct twl4030_bci_device_info *di = _di;
++
++#ifdef CONFIG_LOCKDEP
++	/* WORKAROUND for lockdep forcing IRQF_DISABLED on us, which
++	 * we don't want and can't tolerate.  Although it might be
++	 * friendlier not to borrow this thread context...
++	 */
++	local_irq_enable();
++#endif
++
++	twl4030charger_presence_evt();
++	power_supply_changed(&di->bat);
++
++	return IRQ_HANDLED;
++}
++
++/*
++ * This function handles the twl4030 battery presence interrupt
++ */
++static int twl4030battery_presence_evt(void)
++{
++	int ret;
++	u8 batstsmchg, batstspchg;
++
++	/* check for the battery presence in main charge*/
++	ret = twl_i2c_read_u8(TWL4030_MODULE_MAIN_CHARGE,
++			&batstsmchg, REG_BCIMFSTS3);
++	if (ret)
++		return ret;
++
++	/* check for the battery presence in precharge */
++	ret = twl_i2c_read_u8(TWL4030_MODULE_PRECHARGE,
++			&batstspchg, REG_BCIMFSTS1);
++	if (ret)
++		return ret;
++
++	/*
++	 * REVISIT: Physically inserting/removing the batt
++	 * does not seem to generate an int on 3430ES2 SDP.
++	 */
++	if ((batstspchg & BATSTSPCHG) || (batstsmchg & BATSTSMCHG)) {
++		/* In case of the battery insertion event */
++		ret = clear_n_set(TWL4030_MODULE_INTERRUPTS, BATSTS_EDRRISIN,
++			BATSTS_EDRFALLING, REG_BCIEDR2);
++		if (ret)
++			return ret;
++	} else {
++		/* In case of the battery removal event */
++		ret = clear_n_set(TWL4030_MODULE_INTERRUPTS, BATSTS_EDRFALLING,
++			BATSTS_EDRRISIN, REG_BCIEDR2);
++		if (ret)
++			return ret;
++	}
++
++	return 0;
++}
++
++/*
++ * This function handles the twl4030 battery voltage level interrupt.
++ */
++static int twl4030battery_level_evt(void)
++{
++	int ret;
++	u8 mfst;
++
++	/* checking for threshold event */
++	ret = twl_i2c_read_u8(TWL4030_MODULE_MAIN_CHARGE,
++			&mfst, REG_BCIMFSTS2);
++	if (ret)
++		return ret;
++
++	/* REVISIT could use a bitmap */
++	if (mfst & VBATOV4) {
++		LVL_4 = 1;
++		LVL_3 = 0;
++		LVL_2 = 0;
++		LVL_1 = 0;
++	} else if (mfst & VBATOV3) {
++		LVL_4 = 0;
++		LVL_3 = 1;
++		LVL_2 = 0;
++		LVL_1 = 0;
++	} else if (mfst & VBATOV2) {
++		LVL_4 = 0;
++		LVL_3 = 0;
++		LVL_2 = 1;
++		LVL_1 = 0;
++	} else {
++		LVL_4 = 0;
++		LVL_3 = 0;
++		LVL_2 = 0;
++		LVL_1 = 1;
++	}
++
++	return 0;
++}
++
++/*
++ * Interrupt service routine
++ *
++ * Attends to BCI interruptions events,
++ * specifically BATSTS (battery connection and removal)
++ * VBATOV (main battery voltage threshold) events
++ *
++ */
++static irqreturn_t twl4030battery_interrupt(int irq, void *_di)
++{
++	u8 isr1a_val, isr2a_val, clear_2a, clear_1a;
++	int ret;
++
++#ifdef CONFIG_LOCKDEP
++	/* WORKAROUND for lockdep forcing IRQF_DISABLED on us, which
++	 * we don't want and can't tolerate.  Although it might be
++	 * friendlier not to borrow this thread context...
++	 */
++	local_irq_enable();
++#endif
++
++	ret = twl_i2c_read_u8(TWL4030_MODULE_INTERRUPTS, &isr1a_val,
++				REG_BCIISR1A);
++	if (ret)
++		return IRQ_NONE;
++
++	ret = twl_i2c_read_u8(TWL4030_MODULE_INTERRUPTS, &isr2a_val,
++				REG_BCIISR2A);
++	if (ret)
++		return IRQ_NONE;
++
++	clear_2a = (isr2a_val & VBATLVL_ISR1) ? (VBATLVL_ISR1) : 0;
++	clear_1a = (isr1a_val & BATSTS_ISR1) ? (BATSTS_ISR1) : 0;
++
++	/* cleaning BCI interrupt status flags */
++	ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS,
++			clear_1a , REG_BCIISR1A);
++	if (ret)
++		return IRQ_NONE;
++
++	ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS,
++			clear_2a , REG_BCIISR2A);
++	if (ret)
++		return IRQ_NONE;
++
++	/* battery connetion or removal event */
++	if (isr1a_val & BATSTS_ISR1)
++		twl4030battery_presence_evt();
++	/* battery voltage threshold event*/
++	else if (isr2a_val & VBATLVL_ISR1)
++		twl4030battery_level_evt();
++	else
++		return IRQ_NONE;
++
++	return IRQ_HANDLED;
++}
++
++/*
++ * Enable/Disable hardware battery level event notifications.
++ */
++static int twl4030battery_hw_level_en(int enable)
++{
++	int ret;
++
++	if (enable) {
++		/* unmask VBATOV interrupt for INT1 */
++		ret = clear_n_set(TWL4030_MODULE_INTERRUPTS, VBATLVL_IMR1,
++			0, REG_BCIIMR2A);
++		if (ret)
++			return ret;
++
++		/* configuring interrupt edge detection for VBATOv */
++		ret = clear_n_set(TWL4030_MODULE_INTERRUPTS, 0,
++			VBATLVL_EDRRISIN, REG_BCIEDR3);
++		if (ret)
++			return ret;
++	} else {
++		/* mask VBATOV interrupt for INT1 */
++		ret = clear_n_set(TWL4030_MODULE_INTERRUPTS, 0,
++			VBATLVL_IMR1, REG_BCIIMR2A);
++		if (ret)
++			return ret;
++	}
++
++	return 0;
++}
++
++/*
++ * Enable/disable hardware battery presence event notifications.
++ */
++static int twl4030battery_hw_presence_en(int enable)
++{
++	int ret;
++
++	if (enable) {
++		/* unmask BATSTS interrupt for INT1 */
++		ret = clear_n_set(TWL4030_MODULE_INTERRUPTS, BATSTS_IMR1,
++			0, REG_BCIIMR1A);
++		if (ret)
++			return ret;
++
++		/* configuring interrupt edge for BATSTS */
++		ret = clear_n_set(TWL4030_MODULE_INTERRUPTS, 0,
++			BATSTS_EDRRISIN | BATSTS_EDRFALLING, REG_BCIEDR2);
++		if (ret)
++			return ret;
++	} else {
++		/* mask BATSTS interrupt for INT1 */
++		ret = clear_n_set(TWL4030_MODULE_INTERRUPTS, 0,
++			BATSTS_IMR1, REG_BCIIMR1A);
++		if (ret)
++			return ret;
++	}
++
++	return 0;
++}
++
++/*
++ * Enable/Disable AC Charge funtionality.
++ */
++static int twl4030charger_ac_en(int enable, int automatic)
++{
++	int ret;
++
++	if (enable) {
++		/* forcing the field BCIAUTOAC (BOOT_BCI[0) to 1 */
++		if(!automatic) {
++			ret = clear_n_set(TWL4030_MODULE_PM_MASTER, BCIAUTOAC | CVENAC,
++				(CONFIG_DONE | BCIAUTOWEN),
++				REG_BOOT_BCI);
++		} else {
++			ret = clear_n_set(TWL4030_MODULE_PM_MASTER, 0,
++				(CONFIG_DONE | BCIAUTOWEN | BCIAUTOAC | CVENAC),
++				REG_BOOT_BCI);
++		}
++		if (ret)
++			return ret;
++	} else {
++		/* forcing the field BCIAUTOAC (BOOT_BCI[0) to 0*/
++		ret = clear_n_set(TWL4030_MODULE_PM_MASTER, BCIAUTOAC,
++			(CONFIG_DONE | BCIAUTOWEN),
++			REG_BOOT_BCI);
++		if (ret)
++			return ret;
++	}
++
++	return 0;
++}
++
++/*
++ * Enable/Disable USB Charge funtionality.
++ */
++int twl4030charger_usb_en(int enable)
++{
++	u8 value;
++	int ret;
++	unsigned long timeout;
++
++	if (enable) {
++		/* Check for USB charger conneted */
++		ret = twl4030charger_presence();
++		if (ret < 0)
++			return ret;
++
++		if (!(ret & USB_PW_CONN))
++			return -ENXIO;
++
++		/* forcing the field BCIAUTOUSB (BOOT_BCI[1]) to 1 */
++		ret = clear_n_set(TWL4030_MODULE_PM_MASTER, 0,
++			(CONFIG_DONE | BCIAUTOWEN | BCIAUTOUSB),
++			REG_BOOT_BCI);
++		if (ret)
++			return ret;
++
++		ret = clear_n_set(TWL4030_MODULE_USB, 0, PHY_DPLL_CLK,
++			REG_PHY_CLK_CTRL);
++		if (ret)
++			return ret;
++
++		value = 0;
++		timeout = jiffies + msecs_to_jiffies(50);
++
++		while ((!(value & PHY_DPLL_CLK)) &&
++			time_before(jiffies, timeout)) {
++			udelay(10);
++			ret = twl_i2c_read_u8(TWL4030_MODULE_USB, &value,
++				REG_PHY_CLK_CTRL_STS);
++			if (ret)
++				return ret;
++		}
++
++		/* OTG_EN (POWER_CTRL[5]) to 1 */
++		ret = clear_n_set(TWL4030_MODULE_USB, 0, OTG_EN,
++			REG_POWER_CTRL);
++		if (ret)
++			return ret;
++
++		mdelay(50);
++
++		/* forcing USBFASTMCHG(BCIMFSTS4[2]) to 1 */
++		ret = clear_n_set(TWL4030_MODULE_MAIN_CHARGE, 0,
++			USBFASTMCHG, REG_BCIMFSTS4);
++		if (ret)
++			return ret;
++	} else {
++		twl4030charger_presence();
++		ret = clear_n_set(TWL4030_MODULE_PM_MASTER, BCIAUTOUSB,
++			(CONFIG_DONE | BCIAUTOWEN), REG_BOOT_BCI);
++		if (ret)
++			return ret;
++	}
++
++	return 0;
++}
++
++/*
++ * Return battery temperature
++ * Or < 0 on failure.
++ */
++static int twl4030battery_temperature(struct twl4030_bci_device_info *di)
++{
++	u8 val;
++	int temp, curr, volt, res, ret;
++
++	/* Is a temperature table specified? */
++	if (!di->pdata->tblsize)
++		return 0;
++
++	/* Getting and calculating the thermistor voltage */
++	ret = read_bci_val(T2_BATTERY_TEMP);
++	if (ret < 0)
++		return ret;
++
++	volt = (ret * TEMP_STEP_SIZE) / TEMP_PSR_R;
++
++	/* Getting and calculating the supply current in micro ampers */
++	ret = twl_i2c_read_u8(TWL4030_MODULE_MAIN_CHARGE, &val,
++		 REG_BCICTL2);
++	if (ret)
++		return 0;
++
++	curr = ((val & ITHSENS) + 1) * 10;
++
++	/* Getting and calculating the thermistor resistance in ohms*/
++	res = volt * 1000 / curr;
++
++	/*calculating temperature*/
++	for (temp = 58; temp >= 0; temp--) {
++		int actual = di->pdata->battery_tmp_tbl[temp];
++		if ((actual - res) >= 0)
++			break;
++	}
++
++	/* Negative temperature */
++	if (temp < 3) {
++		if (temp == 2)
++			temp = -1;
++		else if (temp == 1)
++			temp = -2;
++		else
++			temp = -3;
++	}
++
++	return temp + 1;
++}
++
++/*
++ * Return battery voltage
++ * Or < 0 on failure.
++ */
++static int twl4030battery_voltage(void)
++{
++	int volt = read_bci_val(T2_BATTERY_VOLT);
++	return (volt * VOLT_STEP_SIZE) / VOLT_PSR_R;
++}
++
++/*
++ * Get latest battery voltage (using MADC)
++ *
++ * When the BCI is not charging, the BCI voltage registers are not
++ * updated and are 'frozen' but the data can be read through the
++ * MADC.
++ */
++static int twl4030battery_voltage_madc(void)
++{
++	struct twl4030_madc_request req;
++
++	req.channels = (1 << 12);
++	req.do_avg = 0;
++	req.method = TWL4030_MADC_SW1;
++	req.active = 0;
++	req.func_cb = NULL;
++	twl4030_madc_conversion(&req);
++
++	return (((int) req.rbuf[12]) * VOLT_STEP_SIZE) / VOLT_PSR_R;
++}
++
++/*
++ * Return the battery current
++ * Or < 0 on failure.
++ */
++static int twl4030battery_current(void)
++{
++	int ret, curr = read_bci_val(T2_BATTERY_CUR);
++	u8 val;
++
++	ret = twl_i2c_read_u8(TWL4030_MODULE_MAIN_CHARGE, &val,
++		REG_BCICTL1);
++	if (ret)
++		return ret;
++
++	if (val & CGAIN) /* slope of 0.44 mV/mA */
++		return (curr * CURR_STEP_SIZE) / CURR_PSR_R1;
++	else /* slope of 0.88 mV/mA */
++		return (curr * CURR_STEP_SIZE) / CURR_PSR_R2;
++}
++
++/*
++ * Return the battery backup voltage
++ * Or < 0 on failure.
++ */
++static int twl4030backupbatt_voltage(void)
++{
++	struct twl4030_madc_request req;
++	int temp;
++
++	req.channels = (1 << 9);
++	req.do_avg = 0;
++	req.method = TWL4030_MADC_SW1;
++	req.active = 0;
++	req.func_cb = NULL;
++	twl4030_madc_conversion(&req);
++	temp = (u16)req.rbuf[9];
++
++	return  (temp * BK_VOLT_STEP_SIZE) / BK_VOLT_PSR_R;
++}
++
++/*
++ * Returns an integer value, that means,
++ * NO_PW_CONN  no power supply is connected
++ * AC_PW_CONN  if the AC power supply is connected
++ * USB_PW_CONN  if the USB power supply is connected
++ * AC_PW_CONN + USB_PW_CONN if USB and AC power supplies are both connected
++ *
++ * Or < 0 on failure.
++ */
++static int twl4030charger_presence(void)
++{
++	int ret;
++	u8 hwsts;
++
++	ret = twl_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &hwsts,
++		REG_STS_HW_CONDITIONS);
++	if (ret) {
++		pr_err("twl4030_bci: error reading STS_HW_CONDITIONS\n");
++		return ret;
++	}
++
++	ret = (hwsts & STS_CHG) ? AC_PW_CONN : NO_PW_CONN;
++	ret += (hwsts & STS_VBUS) ? USB_PW_CONN : NO_PW_CONN;
++
++	if (ret & USB_PW_CONN)
++		usb_charger_flag = 1;
++	else
++		usb_charger_flag = 0;
++
++	return ret;
++
++}
++
++/*
++ * Returns the main charge FSM status
++ * Or < 0 on failure.
++ */
++static int twl4030bci_status(void)
++{
++	int ret;
++	u8 status;
++
++	ret = twl_i2c_read_u8(TWL4030_MODULE_MAIN_CHARGE,
++		&status, REG_BCIMSTATEC);
++	if (ret) {
++		pr_err("twl4030_bci: error reading BCIMSTATEC\n");
++		return ret;
++	}
++
++#ifdef DEBUG
++	printk("BCI DEBUG: BCIMSTATEC Charge state is 0x%x\n", status);
++#endif
++	return (int) (status & BCIMSTAT_MASK);
++}
++
++static int read_bci_val(u8 reg)
++{
++	int ret, temp;
++	u8 val;
++
++	/* reading MSB */
++	ret = twl_i2c_read_u8(TWL4030_MODULE_MAIN_CHARGE, &val,
++		reg + 1);
++	if (ret)
++		return ret;
++
++	temp = ((int)(val & 0x03)) << 8;
++
++	/* reading LSB */
++	ret = twl_i2c_read_u8(TWL4030_MODULE_MAIN_CHARGE, &val,
++		reg);
++	if (ret)
++		return ret;
++
++	return temp | val;
++}
++
++/*
++ * Settup the twl4030 BCI module to enable backup
++ * battery charging.
++ */
++static int twl4030backupbatt_voltage_setup(void)
++{
++	int ret;
++
++	/* Starting backup batery charge */
++	ret = clear_n_set(TWL4030_MODULE_PM_RECEIVER, 0, BBCHEN,
++		REG_BB_CFG);
++	if (ret)
++		return ret;
++
++	return 0;
++}
++
++/*
++ * Settup the twl4030 BCI module to measure battery
++ * temperature
++ */
++static int twl4030battery_temp_setup(void)
++{
++#ifdef DEBUG
++	u8 i;
++#endif
++	u8 ret;
++
++	/* Enabling thermistor current */
++	ret = clear_n_set(TWL4030_MODULE_MAIN_CHARGE, 0, 0x1B,
++		REG_BCICTL1);
++	if (ret)
++		return ret;
++
++#ifdef DEBUG
++	twl_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &ret, REG_BOOT_BCI);
++	printk("BCI DEBUG: BOOT_BCI Value is 0x%x\n", ret);
++
++	twl_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &ret, REG_STS_HW_CONDITIONS);
++	printk("BCI DEBUG: STS_HW_CONDITIONS Value is 0x%x\n", ret);
++
++	twl_i2c_read_u8(TWL4030_MODULE_MAIN_CHARGE, &ret, REG_BCICTL1);
++	printk("BCI DEBUG: BCICTL1 Value is 0x%x\n", ret);
++
++	twl_i2c_read_u8(TWL4030_MODULE_MAIN_CHARGE, &ret, REG_BCICTL2);
++	printk("BCI DEBUG: BCICTL2 Value is 0x%x\n", ret);
++
++	twl_i2c_read_u8(TWL4030_MODULE_MAIN_CHARGE, &ret, 0x0);
++	printk("BCI DEBUG: BCIMDEN Value is 0x%x\n", ret);
++
++	twl_i2c_read_u8(TWL4030_MODULE_INTBR, &ret, REG_GPBR1);
++	printk("BCI DEBUG: GPBR1 Value is 0x%x\n", ret);
++
++	for(i = 0x0; i <= 0x32; i++)
++	{
++		twl_i2c_read_u8(TWL4030_MODULE_MAIN_CHARGE, &ret, i);
++		printk("BCI DEBUG: BCI 0x%x Value is 0x%x\n", i, ret);
++	}
++#endif
++
++	return 0;
++}
++
++/*
++ * Sets and clears bits on an given register on a given module
++ */
++static inline int clear_n_set(u8 mod_no, u8 clear, u8 set, u8 reg)
++{
++	int ret;
++	u8 val = 0;
++
++	/* Gets the initial register value */
++	ret = twl_i2c_read_u8(mod_no, &val, reg);
++	if (ret)
++		return ret;
++	/* Clearing all those bits to clear */
++	val &= ~(clear);
++
++	/* Setting all those bits to set */
++	val |= set;
++
++	/* Update the register */
++	ret = twl_i2c_write_u8(mod_no, val, reg);
++	if (ret)
++		return ret;
++
++	return 0;
++}
++
++static enum power_supply_property twl4030_bci_battery_props[] = {
++	POWER_SUPPLY_PROP_STATUS,
++	POWER_SUPPLY_PROP_ONLINE,
++	POWER_SUPPLY_PROP_VOLTAGE_NOW,
++	POWER_SUPPLY_PROP_CURRENT_NOW,
++	POWER_SUPPLY_PROP_CAPACITY,
++	POWER_SUPPLY_PROP_TEMP,
++};
++
++static enum power_supply_property twl4030_bk_bci_battery_props[] = {
++	POWER_SUPPLY_PROP_VOLTAGE_NOW,
++};
++
++static void
++twl4030_bk_bci_battery_read_status(struct twl4030_bci_device_info *di)
++{
++	di->bk_voltage_uV = twl4030backupbatt_voltage();
++}
++
++static void twl4030_bk_bci_battery_work(struct work_struct *work)
++{
++	struct twl4030_bci_device_info *di = container_of(work,
++		struct twl4030_bci_device_info,
++		twl4030_bk_bci_monitor_work.work);
++
++	if(!di->pdata->no_backup_battery)
++		twl4030_bk_bci_battery_read_status(di);
++	schedule_delayed_work(&di->twl4030_bk_bci_monitor_work, 500);
++}
++
++static void twl4030_bci_battery_read_status(struct twl4030_bci_device_info *di)
++{
++	if(di->charge_status != POWER_SUPPLY_STATUS_DISCHARGING) {
++		di->temp_C = twl4030battery_temperature(di);
++		di->voltage_uV = twl4030battery_voltage();
++		di->current_uA = twl4030battery_current();
++	}
++}
++
++static void
++twl4030_bci_battery_update_status(struct twl4030_bci_device_info *di)
++{
++	if (power_supply_am_i_supplied(&di->bat))
++		di->charge_status = POWER_SUPPLY_STATUS_CHARGING;
++	else
++		di->charge_status = POWER_SUPPLY_STATUS_DISCHARGING;
++	twl4030_bci_battery_read_status(di);
++}
++
++static void twl4030_bci_battery_work(struct work_struct *work)
++{
++	struct twl4030_bci_device_info *di = container_of(work,
++		struct twl4030_bci_device_info, twl4030_bci_monitor_work.work);
++
++	twl4030_bci_battery_update_status(di);
++	schedule_delayed_work(&di->twl4030_bci_monitor_work, 100);
++}
++
++
++#define to_twl4030_bci_device_info(x) container_of((x), \
++			struct twl4030_bci_device_info, bat);
++
++static void twl4030_bci_battery_external_power_changed(struct power_supply *psy)
++{
++	struct twl4030_bci_device_info *di = to_twl4030_bci_device_info(psy);
++
++	cancel_delayed_work(&di->twl4030_bci_monitor_work);
++	schedule_delayed_work(&di->twl4030_bci_monitor_work, 0);
++}
++
++#define to_twl4030_bk_bci_device_info(x) container_of((x), \
++		struct twl4030_bci_device_info, bk_bat);
++
++static ssize_t
++show_charge_current(struct device *dev, struct device_attribute *attr, char *buf)
++{
++	u8  ctl;
++	int ret = read_bci_val(REG_BCIIREF1) & 0x1FF;
++	twl_i2c_read_u8(TWL4030_MODULE_MAIN_CHARGE, &ctl, REG_BCICTL1);
++
++	if (ctl & CGAIN)
++		ret |= 0x200;
++
++#ifdef DEBUG
++	/* Dump debug */
++	twl4030battery_temp_setup();
++#endif
++
++	return sprintf(buf, "%d\n", ret);
++}
++
++static ssize_t
++set_charge_current(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
++{
++	unsigned long newCurrent;
++	int ret;
++
++	ret = strict_strtoul(buf, 10, &newCurrent);
++	if (ret)
++		return -EINVAL;
++
++	ret = twl_i2c_write_u8(TWL4030_MODULE_MAIN_CHARGE, KEY_IIREF, REG_BCIMFKEY);
++	if (ret)
++		return ret;
++
++	ret = twl_i2c_write_u8(TWL4030_MODULE_MAIN_CHARGE, newCurrent & 0xff, REG_BCIIREF1);
++	if (ret)
++		return ret;
++
++	ret = twl_i2c_write_u8(TWL4030_MODULE_MAIN_CHARGE, KEY_IIREF, REG_BCIMFKEY);
++	if (ret)
++		return ret;
++
++	ret = twl_i2c_write_u8(TWL4030_MODULE_MAIN_CHARGE, (newCurrent >> 8) & 0x1, REG_BCIIREF2);
++	if (ret)
++		return ret;
++
++	/* Set software-controlled charge */
++	twl4030charger_ac_en(ENABLE, 0);
++
++	/* Set CGAIN = 0 or 1 */
++	if(newCurrent > 511) {
++		u8 tmp;
++
++		/* Set CGAIN = 1 -- need to wait until automatic charge turns off */
++		while(!ret) {
++			clear_n_set(TWL4030_MODULE_MAIN_CHARGE, 0, CGAIN | 0x1B, REG_BCICTL1);
++			twl_i2c_read_u8(TWL4030_MODULE_MAIN_CHARGE, &tmp, REG_BCICTL1);
++
++			ret = tmp & CGAIN;
++			if(!ret)
++				mdelay(50);
++		}
++	} else {
++		u8 tmp;
++
++		/* Set CGAIN = 0 -- need to wait until automatic charge turns off */
++		while(!ret) {
++			clear_n_set(TWL4030_MODULE_MAIN_CHARGE, CGAIN, 0x1B, REG_BCICTL1);
++			twl_i2c_read_u8(TWL4030_MODULE_MAIN_CHARGE, &tmp, REG_BCICTL1);
++
++			ret = !(tmp & CGAIN);
++			if(!ret)
++				mdelay(50);
++		}
++	}
++
++	/* Set automatic charge (CGAIN = 0/1 persists) */
++	twl4030charger_ac_en(ENABLE, 1);
++
++	return count;
++}
++
++static ssize_t
++show_voltage(struct device *dev, struct device_attribute *attr, char *buf)
++{
++	return sprintf(buf, "%d\n", twl4030battery_voltage_madc());
++}
++
++static DEVICE_ATTR(charge_current, S_IRUGO | S_IWUGO, show_charge_current, set_charge_current);
++static DEVICE_ATTR(voltage_now_madc, S_IRUGO, show_voltage, NULL);
++
++static int twl4030_bk_bci_battery_get_property(struct power_supply *psy,
++					enum power_supply_property psp,
++					union power_supply_propval *val)
++{
++	struct twl4030_bci_device_info *di = to_twl4030_bk_bci_device_info(psy);
++
++	switch (psp) {
++	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
++		val->intval = di->bk_voltage_uV;
++		break;
++	default:
++		return -EINVAL;
++	}
++
++	return 0;
++}
++
++static int twl4030_bci_battery_get_property(struct power_supply *psy,
++					enum power_supply_property psp,
++					union power_supply_propval *val)
++{
++	struct twl4030_bci_device_info *di;
++	int status = 0;
++
++	di = to_twl4030_bci_device_info(psy);
++
++	switch (psp) {
++	case POWER_SUPPLY_PROP_STATUS:
++		val->intval = di->charge_status;
++		return 0;
++	default:
++		break;
++	}
++
++	switch (psp) {
++	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
++	{
++		/* Get latest data from MADC -- not done periodically by
++		   worker as this is more expensive, so only do it when we
++		   are actually asked for the data... */
++		if(di->charge_status == POWER_SUPPLY_STATUS_DISCHARGING)
++			val->intval = twl4030battery_voltage_madc();
++		else
++			val->intval = di->voltage_uV;
++
++		break;
++	}
++	case POWER_SUPPLY_PROP_CURRENT_NOW:
++		/* FIXME: Get from MADC */
++		if(di->charge_status == POWER_SUPPLY_STATUS_DISCHARGING)
++			val->intval = 0;
++		else
++			val->intval = di->current_uA;
++		break;
++	case POWER_SUPPLY_PROP_TEMP:
++		val->intval = di->temp_C;
++		break;
++	case POWER_SUPPLY_PROP_ONLINE:
++		status = twl4030bci_status();
++		if ((status & AC_STATEC) == AC_STATEC)
++			val->intval = POWER_SUPPLY_TYPE_MAINS;
++		else if (usb_charger_flag)
++			val->intval = POWER_SUPPLY_TYPE_USB;
++		else
++			val->intval = 0;
++		break;
++	case POWER_SUPPLY_PROP_CAPACITY:
++		/* Get latest data from MADC -- not done periodically by
++		   worker as this is more expensive, so only do it when we
++		   are actually asked for the data... */
++		if(di->charge_status == POWER_SUPPLY_STATUS_DISCHARGING)
++			di->voltage_uV = twl4030battery_voltage_madc();
++
++		/*
++		 * need to get the correct percentage value per the
++		 * battery characteristics. Approx values for now.
++		 */
++		if (di->voltage_uV < 2894 || LVL_1) {
++			val->intval = 5;
++			LVL_1 = 0;
++		} else if ((di->voltage_uV < 3451 && di->voltage_uV > 2894)
++			|| LVL_2) {
++			val->intval = 20;
++			LVL_2 = 0;
++		} else if ((di->voltage_uV < 3902 && di->voltage_uV > 3451)
++			|| LVL_3) {
++			val->intval = 50;
++			LVL_3 = 0;
++		} else if ((di->voltage_uV < 3949 && di->voltage_uV > 3902)
++			|| LVL_4) {
++			val->intval = 75;
++			LVL_4 = 0;
++		} else if (di->voltage_uV > 3949)
++			val->intval = 90;
++		break;
++	default:
++		return -EINVAL;
++	}
++	return 0;
++}
++
++static char *twl4030_bci_supplied_to[] = {
++	"twl4030_bci_battery",
++};
++
++static int __init twl4030_bci_battery_probe(struct platform_device *pdev)
++{
++	struct twl4030_bci_platform_data *pdata = pdev->dev.platform_data;
++	struct twl4030_bci_device_info *di;
++	int irq;
++	int ret;
++
++	di = kzalloc(sizeof(*di), GFP_KERNEL);
++	if (!di)
++		return -ENOMEM;
++
++	di->dev = &pdev->dev;
++	di->bat.name = "twl4030_bci_battery";
++	di->bat.supplied_to = twl4030_bci_supplied_to;
++	di->bat.num_supplicants = ARRAY_SIZE(twl4030_bci_supplied_to);
++	di->bat.type = POWER_SUPPLY_TYPE_BATTERY;
++	di->bat.properties = twl4030_bci_battery_props;
++	di->bat.num_properties = ARRAY_SIZE(twl4030_bci_battery_props);
++	di->bat.get_property = twl4030_bci_battery_get_property;
++	di->bat.external_power_changed =
++			twl4030_bci_battery_external_power_changed;
++
++	di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
++
++	di->bk_bat.name = "twl4030_bci_bk_battery";
++	di->bk_bat.type = POWER_SUPPLY_TYPE_BATTERY;
++	di->bk_bat.properties = twl4030_bk_bci_battery_props;
++	di->bk_bat.num_properties = ARRAY_SIZE(twl4030_bk_bci_battery_props);
++	di->bk_bat.get_property = twl4030_bk_bci_battery_get_property;
++	di->bk_bat.external_power_changed = NULL;
++	di->pdata = pdata;
++
++	/* Set up clocks */
++	twl_i2c_write_u8(TWL4030_MODULE_INTBR, MADC_HFCLK_EN | DEFAULT_MADC_CLK_EN, REG_GPBR1);
++
++	twl4030charger_ac_en(ENABLE, CHARGE_MODE);
++	twl4030charger_usb_en(ENABLE);
++	twl4030battery_hw_level_en(ENABLE);
++	twl4030battery_hw_presence_en(ENABLE);
++
++	platform_set_drvdata(pdev, di);
++
++	/* settings for temperature sensing */
++	ret = twl4030battery_temp_setup();
++	if (ret)
++		goto temp_setup_fail;
++
++	/* enabling GPCH09 for read back battery voltage */
++	if(!di->pdata->no_backup_battery)
++	{
++		ret = twl4030backupbatt_voltage_setup();
++		if (ret)
++			goto voltage_setup_fail;
++	}
++
++	/* REVISIT do we need to request both IRQs ?? */
++
++	/* request BCI interruption */
++	irq = platform_get_irq(pdev, 1);
++	ret = request_irq(irq, twl4030battery_interrupt,
++		0, pdev->name, NULL);
++	if (ret) {
++		dev_dbg(&pdev->dev, "could not request irq %d, status %d\n",
++			irq, ret);
++		goto batt_irq_fail;
++	}
++
++	/* request Power interruption */
++	irq = platform_get_irq(pdev, 0);
++	ret = request_irq(irq, twl4030charger_interrupt,
++		0, pdev->name, di);
++
++	if (ret) {
++		dev_dbg(&pdev->dev, "could not request irq %d, status %d\n",
++			irq, ret);
++		goto chg_irq_fail;
++	}
++
++	ret = power_supply_register(&pdev->dev, &di->bat);
++	if (ret) {
++		dev_dbg(&pdev->dev, "failed to register main battery\n");
++		goto batt_failed;
++	}
++
++	INIT_DELAYED_WORK_DEFERRABLE(&di->twl4030_bci_monitor_work,
++				twl4030_bci_battery_work);
++	schedule_delayed_work(&di->twl4030_bci_monitor_work, 0);
++
++	if(!pdata->no_backup_battery)
++	{
++		ret = power_supply_register(&pdev->dev, &di->bk_bat);
++		if (ret) {
++			dev_dbg(&pdev->dev, "failed to register backup battery\n");
++			goto bk_batt_failed;
++		}
++	}
++
++	ret = device_create_file(di->bat.dev, &dev_attr_voltage_now_madc);
++	ret = device_create_file(di->bat.dev, &dev_attr_charge_current);
++	if (ret) {
++		dev_err(&pdev->dev, "failed to create sysfs entries\n");
++		goto bk_batt_failed;
++	}
++
++	INIT_DELAYED_WORK_DEFERRABLE(&di->twl4030_bk_bci_monitor_work,
++				twl4030_bk_bci_battery_work);
++	schedule_delayed_work(&di->twl4030_bk_bci_monitor_work, 500);
++
++	set_charge_current (NULL, NULL, "1023", 4);
++	return 0;
++
++bk_batt_failed:
++	if(!pdata->no_backup_battery)
++		power_supply_unregister(&di->bat);
++batt_failed:
++	free_irq(irq, di);
++chg_irq_fail:
++	irq = platform_get_irq(pdev, 1);
++	free_irq(irq, NULL);
++batt_irq_fail:
++voltage_setup_fail:
++temp_setup_fail:
++	twl4030charger_ac_en(DISABLE, CHARGE_MODE);
++	twl4030charger_usb_en(DISABLE);
++	twl4030battery_hw_level_en(DISABLE);
++	twl4030battery_hw_presence_en(DISABLE);
++	kfree(di);
++
++	return ret;
++}
++
++static int __exit twl4030_bci_battery_remove(struct platform_device *pdev)
++{
++	struct twl4030_bci_device_info *di = platform_get_drvdata(pdev);
++	int irq;
++
++	twl4030charger_ac_en(DISABLE, CHARGE_MODE);
++	twl4030charger_usb_en(DISABLE);
++	twl4030battery_hw_level_en(DISABLE);
++	twl4030battery_hw_presence_en(DISABLE);
++
++	irq = platform_get_irq(pdev, 0);
++	free_irq(irq, di);
++
++	irq = platform_get_irq(pdev, 1);
++	free_irq(irq, NULL);
++
++	flush_scheduled_work();
++	power_supply_unregister(&di->bat);
++	power_supply_unregister(&di->bk_bat);
++	platform_set_drvdata(pdev, NULL);
++	kfree(di);
++
++	return 0;
++}
++
++#ifdef CONFIG_PM
++static int twl4030_bci_battery_suspend(struct platform_device *pdev,
++	pm_message_t state)
++{
++	struct twl4030_bci_device_info *di = platform_get_drvdata(pdev);
++
++	di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
++	cancel_delayed_work(&di->twl4030_bci_monitor_work);
++	cancel_delayed_work(&di->twl4030_bk_bci_monitor_work);
++	return 0;
++}
++
++static int twl4030_bci_battery_resume(struct platform_device *pdev)
++{
++	struct twl4030_bci_device_info *di = platform_get_drvdata(pdev);
++
++	schedule_delayed_work(&di->twl4030_bci_monitor_work, 0);
++	schedule_delayed_work(&di->twl4030_bk_bci_monitor_work, 50);
++	return 0;
++}
++#else
++#define twl4030_bci_battery_suspend	NULL
++#define twl4030_bci_battery_resume	NULL
++#endif /* CONFIG_PM */
++
++static struct platform_driver twl4030_bci_battery_driver = {
++	.probe		= twl4030_bci_battery_probe,
++	.remove		= __exit_p(twl4030_bci_battery_remove),
++	.suspend	= twl4030_bci_battery_suspend,
++	.resume		= twl4030_bci_battery_resume,
++	.driver		= {
++		.name	= "twl4030_bci",
++	},
++};
++
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:twl4030_bci");
++MODULE_AUTHOR("Texas Instruments Inc");
++
++static int __init twl4030_battery_init(void)
++{
++	return platform_driver_register(&twl4030_bci_battery_driver);
++}
++module_init(twl4030_battery_init);
++
++static void __exit twl4030_battery_exit(void)
++{
++	platform_driver_unregister(&twl4030_bci_battery_driver);
++}
++module_exit(twl4030_battery_exit);
++
+diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
+index d975c5b..a3470ce 100644
+--- a/include/linux/i2c/twl.h
++++ b/include/linux/i2c/twl.h
+@@ -442,6 +442,7 @@ struct twl4030_clock_init_data {
+ struct twl4030_bci_platform_data {
+ 	int *battery_tmp_tbl;
+ 	unsigned int tblsize;
++	bool no_backup_battery;
+ };
+ 
+ /* TWL4030_GPIO_MAX (18) GPIOs, with interrupts */
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0016-ARM-OMAP-omap3-touchbook-update-boardfile.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0016-ARM-OMAP-omap3-touchbook-update-boardfile.patch
new file mode 100644
index 0000000..0dc58ab
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0016-ARM-OMAP-omap3-touchbook-update-boardfile.patch
@@ -0,0 +1,620 @@
+From 67a87638586acaf7907f94d2f0d3b09190c23880 Mon Sep 17 00:00:00 2001
+From: Gregoire Gentil <gregoire@gentil.com>
+Date: Fri, 12 Mar 2010 11:49:16 +0100
+Subject: [PATCH 16/17] ARM: OMAP: omap3-touchbook: update boardfile
+
+---
+ arch/arm/mach-omap2/board-omap3touchbook.c |  417 +++++++++++++++++++++-------
+ 1 files changed, 322 insertions(+), 95 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
+index fc3e03c..c22a3e3 100644
+--- a/arch/arm/mach-omap2/board-omap3touchbook.c
++++ b/arch/arm/mach-omap2/board-omap3touchbook.c
+@@ -1,7 +1,7 @@
+ /*
+  * linux/arch/arm/mach-omap2/board-omap3touchbook.c
+  *
+- * Copyright (C) 2009 Always Innovating
++ * Copyright (C) 2009-2010 Always Innovating
+  *
+  * Modified from mach-omap2/board-omap3beagleboard.c
+  *
+@@ -33,6 +33,7 @@
+ #include <linux/spi/spi.h>
+ 
+ #include <linux/spi/ads7846.h>
++#include <linux/mma7455l.h>
+ 
+ #include <linux/regulator/machine.h>
+ #include <linux/i2c/twl.h>
+@@ -45,6 +46,7 @@
+ 
+ #include <plat/board.h>
+ #include <plat/common.h>
++#include <plat/display.h>
+ #include <plat/gpmc.h>
+ #include <plat/nand.h>
+ #include <plat/usb.h>
+@@ -60,18 +62,22 @@
+ 
+ #include <asm/setup.h>
+ 
++#include <plat/dmtimer.h>
++#include <linux/backlight.h>
+ 
+ #define GPMC_CS0_BASE  0x60
+ #define GPMC_CS_SIZE   0x30
+ 
+ #define NAND_BLOCK_SIZE		SZ_128K
+ 
++#define OMAP3_HJ_GPIO		56
+ #define OMAP3_AC_GPIO		136
++#define OMAP3_TS2_GPIO		154
+ #define OMAP3_TS_GPIO		162
+ #define TB_BL_PWM_TIMER		9
+ #define TB_KILL_POWER_GPIO	168
+ 
+-unsigned long touchbook_revision;
++unsigned long ai_revision = 2;
+ 
+ static struct mtd_partition omap3touchbook_nand_partitions[] = {
+ 	/* All the partition sizes are listed in terms of NAND block size */
+@@ -126,6 +132,103 @@ static struct platform_device omap3touchbook_nand_device = {
+ 	.resource	= &omap3touchbook_nand_resource,
+ };
+ 
++static int touchbook_enable_dvi(struct omap_dss_device *dssdev)
++{
++	if (dssdev->reset_gpio != -1)
++		gpio_set_value(dssdev->reset_gpio, 1);
++
++	return 0;
++}
++
++static void touchbook_disable_dvi(struct omap_dss_device *dssdev)
++{
++	if (dssdev->reset_gpio != -1)
++		gpio_set_value(dssdev->reset_gpio, 0);
++}
++
++static struct omap_dss_device touchbook_dvi_device = {
++	.type = OMAP_DISPLAY_TYPE_DPI,
++	.name = "dvi",
++	.driver_name = "generic_panel",
++	.phy.dpi.data_lines = 24,
++	.reset_gpio = 176,
++	.platform_enable = touchbook_enable_dvi,
++	.platform_disable = touchbook_disable_dvi,
++};
++
++static int touchbook_panel_enable_tv(struct omap_dss_device *dssdev)
++{
++#define ENABLE_VDAC_DEDICATED           0x03
++#define ENABLE_VDAC_DEV_GRP             0x20
++
++	twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
++			ENABLE_VDAC_DEDICATED,
++			TWL4030_VDAC_DEDICATED);
++	twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
++			ENABLE_VDAC_DEV_GRP, TWL4030_VDAC_DEV_GRP);
++
++	return 0;
++}
++
++static void touchbook_panel_disable_tv(struct omap_dss_device *dssdev)
++{
++	twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00,
++			TWL4030_VDAC_DEDICATED);
++	twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00,
++			TWL4030_VDAC_DEV_GRP);
++}
++
++static struct omap_dss_device touchbook_tv_device = {
++	.name = "tv",
++	.driver_name = "venc",
++	.type = OMAP_DISPLAY_TYPE_VENC,
++	.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
++	.platform_enable = touchbook_panel_enable_tv,
++	.platform_disable = touchbook_panel_disable_tv,
++};
++
++static struct omap_dss_device *touchbook_dss_devices[] = {
++	&touchbook_dvi_device,
++	&touchbook_tv_device,
++};
++
++static struct omap_dss_board_info touchbook_dss_data = {
++	.num_devices = ARRAY_SIZE(touchbook_dss_devices),
++	.devices = touchbook_dss_devices,
++	.default_device = &touchbook_dvi_device,
++};
++
++static struct platform_device touchbook_dss_device = {
++	.name		= "omapdss",
++	.id		= -1,
++	.dev            = {
++		.platform_data = &touchbook_dss_data,
++	},
++};
++
++static struct regulator_consumer_supply touchbook_vdac_supply = {
++	.supply		= "vdda_dac",
++	.dev		= &touchbook_dss_device.dev,
++};
++
++static struct regulator_consumer_supply touchbook_vdvi_supply = {
++	.supply		= "vdds_dsi",
++	.dev		= &touchbook_dss_device.dev,
++};
++
++static void __init touchbook_display_init(void)
++{
++	int r;
++
++	r = gpio_request(touchbook_dvi_device.reset_gpio, "DVI reset");
++	if (r < 0) {
++		printk(KERN_ERR "Unable to get DVI reset GPIO\n");
++		return;
++	}
++
++	gpio_direction_output(touchbook_dvi_device.reset_gpio, 0);
++}
++
+ #include "sdram-micron-mt46h32m32lf-6.h"
+ 
+ static struct twl4030_hsmmc_info mmc[] = {
+@@ -137,15 +240,6 @@ static struct twl4030_hsmmc_info mmc[] = {
+ 	{}	/* Terminator */
+ };
+ 
+-static struct platform_device omap3_touchbook_lcd_device = {
+-	.name		= "omap3touchbook_lcd",
+-	.id		= -1,
+-};
+-
+-static struct omap_lcd_config omap3_touchbook_lcd_config __initdata = {
+-	.ctrl_name	= "internal",
+-};
+-
+ static struct regulator_consumer_supply touchbook_vmmc1_supply = {
+ 	.supply			= "vmmc",
+ };
+@@ -177,6 +271,7 @@ static int touchbook_twl_gpio_setup(struct device *dev,
+ 	 * power switch and overcurrent detect
+ 	 */
+ 
++#if 0
+ 	gpio_request(gpio + 1, "EHCI_nOC");
+ 	gpio_direction_input(gpio + 1);
+ 
+@@ -187,6 +282,7 @@ static int touchbook_twl_gpio_setup(struct device *dev,
+ 	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
+ 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+ 
++#endif
+ 	return 0;
+ }
+ 
+@@ -201,16 +297,6 @@ static struct twl4030_gpio_platform_data touchbook_gpio_data = {
+ 	.setup		= touchbook_twl_gpio_setup,
+ };
+ 
+-static struct regulator_consumer_supply touchbook_vdac_supply = {
+-	.supply		= "vdac",
+-	.dev		= &omap3_touchbook_lcd_device.dev,
+-};
+-
+-static struct regulator_consumer_supply touchbook_vdvi_supply = {
+-	.supply		= "vdvi",
+-	.dev		= &omap3_touchbook_lcd_device.dev,
+-};
+-
+ /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+ static struct regulator_init_data touchbook_vmmc1 = {
+ 	.constraints = {
+@@ -283,6 +369,15 @@ static struct twl4030_codec_data touchbook_codec_data = {
+ 	.audio = &touchbook_audio_data,
+ };
+ 
++static struct twl4030_bci_platform_data touchbook_bci_data = {
++	.tblsize		= 0,
++	.no_backup_battery	= 1,
++};
++
++static struct twl4030_madc_platform_data touchbook_madc_data = {
++	.irq_line	= 1,
++};
++
+ static struct twl4030_platform_data touchbook_twldata = {
+ 	.irq_base	= TWL4030_IRQ_BASE,
+ 	.irq_end	= TWL4030_IRQ_END,
+@@ -291,10 +386,15 @@ static struct twl4030_platform_data touchbook_twldata = {
+ 	.usb		= &touchbook_usb_data,
+ 	.gpio		= &touchbook_gpio_data,
+ 	.codec		= &touchbook_codec_data,
++	.madc		= &touchbook_madc_data,
+ 	.vmmc1		= &touchbook_vmmc1,
+ 	.vsim		= &touchbook_vsim,
+ 	.vdac		= &touchbook_vdac,
+ 	.vpll2		= &touchbook_vpll2,
++
++	/* TouchBook BCI */
++	.bci		= &touchbook_bci_data,
++	.madc		= &touchbook_madc_data,
+ };
+ 
+ static struct i2c_board_info __initdata touchbook_i2c_boardinfo[] = {
+@@ -310,10 +410,18 @@ static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = {
+ 	{
+ 		I2C_BOARD_INFO("bq27200", 0x55),
+ 	},
++	{
++		I2C_BOARD_INFO("chacha", 0x40),
++		.irq = OMAP_GPIO_IRQ(OMAP3_TS2_GPIO),
++	},
++	{
++		I2C_BOARD_INFO("ds1307", 0x68),
++	},
+ };
+ 
+ static int __init omap3_touchbook_i2c_init(void)
+ {
++	int ret;
+ 	/* Standard TouchBook bus */
+ 	omap_register_i2c_bus(1, 2600, touchbook_i2c_boardinfo,
+ 			ARRAY_SIZE(touchbook_i2c_boardinfo));
+@@ -322,53 +430,16 @@ static int __init omap3_touchbook_i2c_init(void)
+ 	omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo,
+ 			ARRAY_SIZE(touchBook_i2c_boardinfo));
+ 
+-	return 0;
+-}
+-
+-static void __init omap3_ads7846_init(void)
+-{
+-	if (gpio_request(OMAP3_TS_GPIO, "ads7846_pen_down")) {
+-		printk(KERN_ERR "Failed to request GPIO %d for "
+-				"ads7846 pen down IRQ\n", OMAP3_TS_GPIO);
+-		return;
++	ret = gpio_request(OMAP3_TS2_GPIO, "chacha");
++	if (ret < 0) {
++		printk(KERN_ERR "Failed to request GPIO %d for chacha IRQ\n", OMAP3_TS2_GPIO);
++		return 0;
+ 	}
++	gpio_direction_input(OMAP3_TS2_GPIO);
+ 
+-	gpio_direction_input(OMAP3_TS_GPIO);
+-	omap_set_gpio_debounce(OMAP3_TS_GPIO, 1);
+-	omap_set_gpio_debounce_time(OMAP3_TS_GPIO, 0xa);
++	return 0;
+ }
+ 
+-static struct ads7846_platform_data ads7846_config = {
+-	.x_min			= 100,
+-	.y_min			= 265,
+-	.x_max			= 3950,
+-	.y_max			= 3750,
+-	.x_plate_ohms		= 40,
+-	.pressure_max		= 255,
+-	.debounce_max		= 10,
+-	.debounce_tol		= 5,
+-	.debounce_rep		= 1,
+-	.gpio_pendown		= OMAP3_TS_GPIO,
+-	.keep_vref_on		= 1,
+-};
+-
+-static struct omap2_mcspi_device_config ads7846_mcspi_config = {
+-	.turbo_mode	= 0,
+-	.single_channel	= 1,	/* 0: slave, 1: master */
+-};
+-
+-static struct spi_board_info omap3_ads7846_spi_board_info[] __initdata = {
+-	{
+-		.modalias		= "ads7846",
+-		.bus_num		= 4,
+-		.chip_select		= 0,
+-		.max_speed_hz		= 1500000,
+-		.controller_data	= &ads7846_mcspi_config,
+-		.irq			= OMAP_GPIO_IRQ(OMAP3_TS_GPIO),
+-		.platform_data		= &ads7846_config,
+-	}
+-};
+-
+ static struct gpio_led gpio_leds[] = {
+ 	{
+ 		.name			= "touchbook::usr0",
+@@ -412,6 +483,7 @@ static struct gpio_keys_button gpio_buttons[] = {
+ 		.gpio			= 183,
+ 		.desc			= "power",
+ 		.wakeup			= 1,
++		.active_low		= 1,
+ 	},
+ };
+ 
+@@ -428,23 +500,8 @@ static struct platform_device keys_gpio = {
+ 	},
+ };
+ 
+-static struct omap_board_config_kernel omap3_touchbook_config[] __initdata = {
+-	{ OMAP_TAG_LCD,		&omap3_touchbook_lcd_config },
+-};
+-
+-#ifdef CONFIG_OMAP_MUX
+-static struct omap_board_mux board_mux[] __initdata = {
+-	{ .reg_offset = OMAP_MUX_TERMINATOR },
+-};
+-#else
+-#define board_mux	NULL
+-#endif
+-
+ static void __init omap3_touchbook_init_irq(void)
+ {
+-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+-	omap_board_config = omap3_touchbook_config;
+-	omap_board_config_size = ARRAY_SIZE(omap3_touchbook_config);
+ 	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+ 			     mt46h32m32lf6_sdrc_params, omap35x_mpu_rate_table,
+ 			     omap35x_dsp_rate_table, omap35x_l3_rate_table);
+@@ -456,9 +513,9 @@ static void __init omap3_touchbook_init_irq(void)
+ }
+ 
+ static struct platform_device *omap3_touchbook_devices[] __initdata = {
+-	&omap3_touchbook_lcd_device,
+ 	&leds_gpio,
+ 	&keys_gpio,
++	&touchbook_dss_device,
+ };
+ 
+ static void __init omap3touchbook_flash_init(void)
+@@ -500,7 +557,7 @@ static void __init omap3touchbook_flash_init(void)
+ 	}
+ }
+ 
+-static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
++static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
+ 
+ 	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+ 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+@@ -512,6 +569,170 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+ 	.reset_gpio_port[2]  = -EINVAL
+ };
+ 
++#ifdef CONFIG_OMAP_MUX
++static struct omap_board_mux board_mux[] __initdata = {
++	{ .reg_offset = OMAP_MUX_TERMINATOR },
++};
++#else
++#define board_mux	NULL
++#endif
++
++static struct ads7846_platform_data ads7846_config = {
++	.x_min			= 100,
++	.y_min			= 265,
++	.x_max			= 3950,
++	.y_max			= 3750,
++	.x_plate_ohms		= 40,
++	.pressure_max		= 255,
++	.debounce_max		= 10,
++	.debounce_tol		= 5,
++	.debounce_rep		= 1,
++	.gpio_pendown		= OMAP3_TS_GPIO,
++	.keep_vref_on		= 1,
++};
++
++static struct omap2_mcspi_device_config ads7846_mcspi_config = {
++	.turbo_mode	= 0,
++	.single_channel	= 1,	/* 0: slave, 1: master */
++};
++
++static struct spi_board_info omap3_ads7846_spi_board_info[] __initdata = {
++	{
++		.modalias		= "ads7846",
++		.bus_num		= 4,
++		.chip_select		= 0,
++		.max_speed_hz		= 1500000,
++		.controller_data	= &ads7846_mcspi_config,
++		.irq			= OMAP_GPIO_IRQ(OMAP3_TS_GPIO),
++		.platform_data		= &ads7846_config,
++	}
++};
++
++static void __init omap3_ads7846_init(void)
++{
++	if (gpio_request(OMAP3_TS_GPIO, "ads7846_pen_down")) {
++		printk(KERN_ERR "Failed to request GPIO %d for "
++				"ads7846 pen down IRQ\n", OMAP3_TS_GPIO);
++		return;
++	}
++
++	gpio_direction_input(OMAP3_TS_GPIO);
++	omap_set_gpio_debounce(OMAP3_TS_GPIO, 1);
++	omap_set_gpio_debounce_time(OMAP3_TS_GPIO, 0xa);
++}
++
++static struct mma7455l_platform_data mma7455l_config = {
++	.calibration_x = -4,
++	.calibration_y = 28,
++	.calibration_z = -28,
++};
++
++static struct omap2_mcspi_device_config mma7455l_mcspi_config = {
++	.turbo_mode	= 0,
++	.single_channel	= 1,	/* 0: slave, 1: master */
++};
++
++static struct spi_board_info omap3_mma7455l_spi_board_info[] __initdata = {
++	{
++		.modalias		= "mma7455l",
++		.bus_num		= 3,
++		.chip_select		= 0,
++		.max_speed_hz		= 200000,
++		.irq			= OMAP_GPIO_IRQ(OMAP3_AC_GPIO),
++		.controller_data	= &mma7455l_mcspi_config, //(void *) 135,
++		.platform_data		= &mma7455l_config,
++	}
++};
++
++static void __init omap3_mma7455l_init(void)
++{
++	int ret;
++
++	ret = gpio_request(OMAP3_AC_GPIO, "mma7455l");
++	if (ret < 0) {
++		printk(KERN_ERR "Failed to request GPIO %d for mma7455l IRQ\n", OMAP3_AC_GPIO);
++		return;
++	}
++
++	gpio_direction_input(OMAP3_AC_GPIO);
++}
++
++static int touchbook_backlight_brightness = 50;
++static struct omap_dm_timer *touchbook_backlight_pwm;
++
++static int touchbook_backlight_read(struct backlight_device *bd)
++{
++	return touchbook_backlight_brightness;
++}
++
++static int touchbook_backlight_update(struct backlight_device *bd)
++{
++	int value = bd->props.brightness;
++	touchbook_backlight_brightness = value;
++
++	/* Frequency calculation:
++	   - For 200Hz PWM, you want to load -164 (=> -32768Hz / 200Hz).
++	   - Minimum duty cycle for the backlight is 15%.
++	   - You have (164*0.85) => ~140 levels of brightness.
++	*/
++
++	/* Halve input brightness */
++	if (!bd->props.boost)
++		value /= 2;
++
++	/* For maximum brightness, just stop the timer... */
++	if(value != bd->props.max_brightness)
++	{
++		/* Load the appropriate value for 200Hz PWM */
++		u32 period = clk_get_rate(omap_dm_timer_get_fclk(touchbook_backlight_pwm)) / bd->props.pwm_fq;
++
++		/* Minimum duty cycle is 15% */
++		u32 minimum = (period * bd->props.min_duty) / 100;
++		u32 maximum = (period * 17) / 20;
++
++		/* Work out match value */
++		u32 match = (maximum * value) / 100;
++
++		/* Start... */
++		omap_dm_timer_set_load(touchbook_backlight_pwm, 1, 0xFFFFFFFF - period - 1);
++		omap_dm_timer_set_match(touchbook_backlight_pwm, 1, 0xFFFFFFFF - minimum - match);
++		omap_dm_timer_write_counter(touchbook_backlight_pwm, -1);
++		omap_dm_timer_start(touchbook_backlight_pwm);
++	}
++	else
++		omap_dm_timer_stop(touchbook_backlight_pwm);
++
++
++	return 0;
++}
++
++static struct backlight_ops touchbook_backlight_properties = {
++	.get_brightness = touchbook_backlight_read,
++	.update_status = touchbook_backlight_update,
++};
++
++static void __init omap3_touchbook_backlight_init(void)
++{
++	static struct backlight_device *bd;
++	bd = backlight_device_register("touchbook", NULL, NULL, &touchbook_backlight_properties);
++
++	if(bd)
++	{
++		touchbook_backlight_pwm = omap_dm_timer_request_specific(TB_BL_PWM_TIMER);
++		omap_dm_timer_enable(touchbook_backlight_pwm);
++		omap_dm_timer_set_source(touchbook_backlight_pwm, OMAP_TIMER_SRC_SYS_CLK);
++		omap_dm_timer_set_pwm(touchbook_backlight_pwm, 1, 1, OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE);
++
++		bd->props.max_brightness = 100;
++		bd->props.brightness = touchbook_backlight_brightness;
++		bd->props.boost = 0;
++		bd->props.min_duty = 15;
++		bd->props.pwm_fq = 200;
++	}
++
++	touchbook_backlight_update(bd);
++}
++
+ static void omap3_touchbook_poweroff(void)
+ {
+ 	int r;
+@@ -525,33 +746,26 @@ static void omap3_touchbook_poweroff(void)
+ 	gpio_direction_output(TB_KILL_POWER_GPIO, 0);
+ }
+ 
+-static void __init early_touchbook_revision(char **p)
++static int __init ai_revision_instance(char *str)
+ {
+-	if (!*p)
+-		return;
++	if (!str)
++		return -EINVAL;
++
++	ai_revision = simple_strtoul(str, NULL, 10);
+ 
+-	strict_strtoul(*p, 10, &touchbook_revision);
++	return 0;
+ }
+-__early_param("tbr=", early_touchbook_revision);
+ 
+ static void __init omap3_touchbook_init(void)
+ {
+ 	pm_power_off = omap3_touchbook_poweroff;
+ 
++	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+ 	omap3_touchbook_i2c_init();
+ 	platform_add_devices(omap3_touchbook_devices,
+ 			ARRAY_SIZE(omap3_touchbook_devices));
+ 	omap_serial_init();
+ 
+-	omap_mux_init_gpio(170, OMAP_PIN_INPUT);
+-	gpio_request(176, "DVI_nPD");
+-	/* REVISIT leave DVI powered down until it's needed ... */
+-	gpio_direction_output(176, true);
+-
+-	/* Touchscreen and accelerometer */
+-	spi_register_board_info(omap3_ads7846_spi_board_info,
+-				ARRAY_SIZE(omap3_ads7846_spi_board_info));
+-	omap3_ads7846_init();
+ 	usb_musb_init();
+ 	usb_ehci_init(&ehci_pdata);
+ 	omap3touchbook_flash_init();
+@@ -559,6 +773,17 @@ static void __init omap3_touchbook_init(void)
+ 	/* Ensure SDRC pins are mux'd for self-refresh */
+ 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+ 	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
++
++	touchbook_display_init();
++	omap3_touchbook_backlight_init();
++
++	/* Touchscreen and accelerometer */
++	spi_register_board_info(omap3_ads7846_spi_board_info,
++				ARRAY_SIZE(omap3_ads7846_spi_board_info));
++	spi_register_board_info(omap3_mma7455l_spi_board_info,
++				ARRAY_SIZE(omap3_mma7455l_spi_board_info));
++	omap3_ads7846_init();
++	omap3_mma7455l_init();
+ }
+ 
+ static void __init omap3_touchbook_map_io(void)
+@@ -567,6 +792,8 @@ static void __init omap3_touchbook_map_io(void)
+ 	omap2_map_common_io();
+ }
+ 
++early_param("air", ai_revision_instance);
++
+ MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
+ 	/* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */
+ 	.phys_io	= 0x48000000,
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0017-ARM-OMAP-add-800MHz-OPP-and-remove-125MHz-one.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0017-ARM-OMAP-add-800MHz-OPP-and-remove-125MHz-one.patch
new file mode 100644
index 0000000..8a06ead
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/0017-ARM-OMAP-add-800MHz-OPP-and-remove-125MHz-one.patch
@@ -0,0 +1,48 @@
+From 1f36c057ab83a5c5e8162094fb52022edd5ba9b8 Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@dominion.thruhere.net>
+Date: Tue, 4 May 2010 09:01:21 +0200
+Subject: [PATCH 17/17] ARM: OMAP: add 800MHz OPP and remove 125MHz one
+
+---
+ arch/arm/mach-omap2/pm34xx.c |    6 ++++--
+ 1 files changed, 4 insertions(+), 2 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
+index d1cc528..42fbcdd 100644
+--- a/arch/arm/mach-omap2/pm34xx.c
++++ b/arch/arm/mach-omap2/pm34xx.c
+@@ -120,7 +120,7 @@ static struct prm_setup_vc prm_setup = {
+ struct omap_opp omap35x_mpu_rate_table[] = {
+ 	{0, 0, 0},
+ 	/*OPP1*/
+-	{S125M, VDD1_OPP1, 0x1E},
++//	{S125M, VDD1_OPP1, 0x1E},
+ 	/*OPP2*/
+ 	{S250M, VDD1_OPP2, 0x26},
+ 	/*OPP3*/
+@@ -131,12 +131,13 @@ struct omap_opp omap35x_mpu_rate_table[] = {
+ 	{S600M, VDD1_OPP5, 0x3C},
+ 	/*OPP6*/
+ 	{S720M, VDD1_OPP6, 0x3C},
++	{S800M, VDD1_OPP6, 0x3F},
+ };
+ 
+ struct omap_opp omap35x_dsp_rate_table[] = {
+ 	{0, 0, 0},
+ 	/*OPP1*/
+-	{S90M, VDD1_OPP1, 0x1E},
++//	{S90M, VDD1_OPP1, 0x1E},
+ 	/*OPP2*/
+ 	{S180M, VDD1_OPP2, 0x26},
+ 	/*OPP3*/
+@@ -147,6 +148,7 @@ struct omap_opp omap35x_dsp_rate_table[] = {
+ 	{S430M, VDD1_OPP5, 0x3C},
+ 	/*OPP5*/
+ 	{S520M, VDD1_OPP6, 0x3C},
++	{S600M, VDD1_OPP6, 0x3F},
+ };
+ 
+ struct omap_opp omap35x_l3_rate_table[] = {
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/defconfig b/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/defconfig
new file mode 100644
index 0000000..6f2b7bd
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3-touchbook/defconfig
@@ -0,0 +1,3043 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32
+# Mon May 10 12:50:28 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_OPROFILE_ARMV7=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_SLOW_WORK=y
+# CONFIG_SLOW_WORK_DEBUG is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_INTEGRITY=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+CONFIG_OMAP_SMARTREFLEX=y
+# CONFIG_OMAP_SMARTREFLEX_TESTING is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+# CONFIG_OMAP_MUX is not set
+CONFIG_OMAP_MCBSP=y
+CONFIG_OMAP_MBOX_FWK=m
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
+# CONFIG_OMAP3_DEBOBS is not set
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_LL_DEBUG_NONE is not set
+# CONFIG_OMAP_PM_NONE is not set
+# CONFIG_OMAP_PM_NOOP is not set
+CONFIG_OMAP_PM_SRF=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_OMAP3517EVM is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+CONFIG_MACH_OMAP3_TOUCHBOOK=y
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_OMAP_ZOOM3 is not set
+# CONFIG_MACH_CM_T35 is not set
+# CONFIG_MACH_IGEP0020 is not set
+# CONFIG_MACH_OMAP_3630SDP is not set
+# CONFIG_OMAP3_EMU is not set
+# CONFIG_OMAP3_SDRC_AC_TIMING is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_THUMBEE=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_USER_L2_PLE is not set
+# CONFIG_USER_PMON is not set
+CONFIG_ARM_ERRATA_430973=y
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_VMSPLIT_3G is not set
+CONFIG_VMSPLIT_2G=y
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0x80000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_LEDS=y
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+CONFIG_CPU_V7_SYSFS=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=" debug "
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+# CONFIG_DEFAULT_BIC is not set
+CONFIG_DEFAULT_CUBIC=y
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+# CONFIG_IPV6_PIMSM_V2 is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+CONFIG_IP_VS=m
+CONFIG_IP_VS_IPV6=y
+CONFIG_IP_VS_DEBUG=y
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=y
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=y
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_RDS is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
+CONFIG_IEEE802154=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=m
+# CONFIG_CAN_DEV is not set
+# CONFIG_CAN_DEBUG_DEVICES is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_ULTRA=y
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+CONFIG_IRDA_DEBUG=y
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+CONFIG_DONGLE=y
+CONFIG_ESI_DONGLE=m
+CONFIG_ACTISYS_DONGLE=m
+CONFIG_TEKRAM_DONGLE=m
+CONFIG_TOIM3232_DONGLE=m
+CONFIG_LITELINK_DONGLE=m
+CONFIG_MA600_DONGLE=m
+CONFIG_GIRBIL_DONGLE=m
+CONFIG_MCP2120_DONGLE=m
+CONFIG_OLD_BELKIN_DONGLE=m
+# CONFIG_ACT200L_DONGLE is not set
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_MRVL is not set
+CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_DEBUG is not set
+# CONFIG_RXKAD is not set
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_WIMAX=m
+CONFIG_WIMAX_DEBUG_LEVEL=8
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_NET_9P=m
+# CONFIG_NET_9P_DEBUG is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=""
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_OMAP_PREFETCH=y
+# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
+# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+CONFIG_EEPROM_93CX6=y
+# CONFIG_IWMC3200TOP is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID6_PQ=m
+# CONFIG_ASYNC_RAID6_TEST is not set
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+# CONFIG_DM_LOG_USERSPACE is not set
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+# CONFIG_DM_MULTIPATH_QL is not set
+# CONFIG_DM_MULTIPATH_ST is not set
+CONFIG_DM_DELAY=m
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+CONFIG_TUN=m
+CONFIG_VETH=m
+# CONFIG_NET_ETHERNET is not set
+CONFIG_MII=m
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_AT76C50X_USB is not set
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_ATH_COMMON is not set
+CONFIG_B43=m
+# CONFIG_B43_SDIO is not set
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+# CONFIG_B43LEGACY is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+# CONFIG_IWM is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+# CONFIG_LIBERTAS_SDIO is not set
+# CONFIG_LIBERTAS_SPI is not set
+# CONFIG_LIBERTAS_DEBUG is not set
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+# CONFIG_P54_SPI is not set
+CONFIG_P54_LEDS=y
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800_LIB=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_HT=y
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+# CONFIG_WL12XX is not set
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+
+#
+# WiMAX Wireless Broadband devices
+#
+# CONFIG_WIMAX_I2400M_USB is not set
+# CONFIG_WIMAX_I2400M_SDIO is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_CDC_EEM is not set
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_USB_HSO is not set
+# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_WAN is not set
+CONFIG_ATM_DRIVERS=y
+# CONFIG_ATM_DUMMY is not set
+# CONFIG_ATM_TCP is not set
+CONFIG_IEEE802154_DRIVERS=m
+# CONFIG_IEEE802154_FAKEHARD is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_PPPOATM is not set
+CONFIG_PPPOL2TP=m
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_TWL4030 is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_TSC2004 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+CONFIG_INPUT_POWERMATE=m
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_TWL4030_PWRBUTTON=y
+CONFIG_INPUT_UINPUT=y
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+CONFIG_INPUT_MMA7455L=y
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+CONFIG_I2C_TINY_USB=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+# CONFIG_SPI_XILINX is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+CONFIG_BATTERY_BQ27x00=y
+# CONFIG_BATTERY_MAX17040 is not set
+CONFIG_TWL4030_BCI_BATTERY=y
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+CONFIG_THERMAL=y
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+CONFIG_TWL4030_WATCHDOG=m
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+# CONFIG_SSB_SDIOHOST is not set
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSB_DEBUG is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_TWL4030_POWER is not set
+CONFIG_TWL4030_CODEC=y
+CONFIG_TWL4030_MADC=y
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+CONFIG_MEDIA_TUNER_CUSTOMISE=y
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_IR=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+CONFIG_VIDEO_TVAUDIO=m
+CONFIG_VIDEO_TDA7432=m
+CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TDA9875=m
+CONFIG_VIDEO_TEA6415C=m
+CONFIG_VIDEO_TEA6420=m
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS5345=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_M52790=m
+CONFIG_VIDEO_TLV320AIC23B=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_WM8739=m
+CONFIG_VIDEO_VP27SMPX=m
+
+#
+# RDS decoders
+#
+CONFIG_VIDEO_SAA6588=m
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_ADV7180=m
+CONFIG_VIDEO_BT819=m
+CONFIG_VIDEO_BT856=m
+CONFIG_VIDEO_BT866=m
+CONFIG_VIDEO_KS0127=m
+# CONFIG_VIDEO_OV7670 is not set
+CONFIG_VIDEO_MT9V011=m
+CONFIG_VIDEO_TCM825X=m
+CONFIG_VIDEO_MT9P012=m
+CONFIG_VIDEO_DW9710=m
+# CONFIG_VIDEO_OV3640 is not set
+CONFIG_VIDEO_IMX046=m
+CONFIG_VIDEO_LV8093=m
+CONFIG_VIDEO_SAA7110=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_SAA7191=m
+CONFIG_VIDEO_TVP514X=m
+CONFIG_VIDEO_TVP5150=m
+CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+CONFIG_VIDEO_SAA7127=m
+CONFIG_VIDEO_SAA7185=m
+CONFIG_VIDEO_ADV7170=m
+CONFIG_VIDEO_ADV7175=m
+CONFIG_VIDEO_THS7303=m
+CONFIG_VIDEO_ADV7343=m
+
+#
+# Video improvement chips
+#
+CONFIG_VIDEO_UPD64031A=m
+CONFIG_VIDEO_UPD64083=m
+CONFIG_VIDEO_VIVI=m
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_AU0828 is not set
+CONFIG_TI_MEDIA=m
+CONFIG_VIDEO_VPSS_SYSTEM=m
+# CONFIG_VIDEO_VPFE_CAPTURE is not set
+CONFIG_VIDEO_OMAP2_VOUT=m
+# CONFIG_VIDEO_OMAP3 is not set
+# CONFIG_VIDEO_OMAP34XX_ISP_PREVIEWER is not set
+# CONFIG_VIDEO_OMAP34XX_ISP_RESIZER is not set
+# CONFIG_SOC_CAMERA is not set
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+# CONFIG_USB_M5602 is not set
+# CONFIG_USB_STV06XX is not set
+# CONFIG_USB_GL860 is not set
+# CONFIG_USB_GSPCA_CONEX is not set
+# CONFIG_USB_GSPCA_ETOMS is not set
+# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA_JEILINJ is not set
+# CONFIG_USB_GSPCA_MARS is not set
+# CONFIG_USB_GSPCA_MR97310A is not set
+# CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_OV534 is not set
+# CONFIG_USB_GSPCA_PAC207 is not set
+# CONFIG_USB_GSPCA_PAC7302 is not set
+# CONFIG_USB_GSPCA_PAC7311 is not set
+# CONFIG_USB_GSPCA_SN9C20X is not set
+# CONFIG_USB_GSPCA_SONIXB is not set
+# CONFIG_USB_GSPCA_SONIXJ is not set
+# CONFIG_USB_GSPCA_SPCA500 is not set
+# CONFIG_USB_GSPCA_SPCA501 is not set
+# CONFIG_USB_GSPCA_SPCA505 is not set
+# CONFIG_USB_GSPCA_SPCA506 is not set
+# CONFIG_USB_GSPCA_SPCA508 is not set
+# CONFIG_USB_GSPCA_SPCA561 is not set
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+# CONFIG_USB_GSPCA_STK014 is not set
+# CONFIG_USB_GSPCA_STV0680 is not set
+# CONFIG_USB_GSPCA_SUNPLUS is not set
+# CONFIG_USB_GSPCA_T613 is not set
+# CONFIG_USB_GSPCA_TV8532 is not set
+# CONFIG_USB_GSPCA_VC032X is not set
+# CONFIG_USB_GSPCA_ZC3XX is not set
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_CX231XX_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_VIDEO_USBVIDEO=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+CONFIG_USB_QUICKCAM_MESSENGER=m
+CONFIG_USB_ET61X251=m
+CONFIG_VIDEO_OVCAMCHIP=m
+CONFIG_USB_W9968CF=m
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+CONFIG_USB_ZC0301=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_I2C_SI4713 is not set
+# CONFIG_RADIO_SI4713 is not set
+# CONFIG_USB_DSBR is not set
+# CONFIG_RADIO_SI470X is not set
+# CONFIG_USB_MR800 is not set
+# CONFIG_RADIO_TEA5764 is not set
+# CONFIG_RADIO_TEF6862 is not set
+CONFIG_DVB_MAX_ADAPTERS=8
+CONFIG_DVB_DYNAMIC_MINORS=y
+CONFIG_DVB_CAPTURE_DRIVERS=y
+# CONFIG_TTPCI_EEPROM is not set
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_DW2102=m
+CONFIG_DVB_USB_CINERGY_T2=m
+CONFIG_DVB_USB_ANYSEE=m
+CONFIG_DVB_USB_DTV5100=m
+CONFIG_DVB_USB_AF9015=m
+CONFIG_DVB_USB_CE6230=m
+CONFIG_DVB_USB_FRIIO=m
+CONFIG_DVB_USB_EC168=m
+CONFIG_SMS_SIANO_MDTV=m
+
+#
+# Siano module components
+#
+# CONFIG_SMS_USB_DRV is not set
+# CONFIG_SMS_SDIO_DRV is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_ZL10039=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_SI21XX=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_AF9013=m
+CONFIG_DVB_EC100=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_S5H1411=m
+CONFIG_DVB_DIB8000=m
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_LGS8GL5=m
+CONFIG_DAB=y
+CONFIG_USB_DABUSB=m
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_TMIO is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_OMAP2_VRAM=y
+CONFIG_OMAP2_VRFB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=18
+CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
+# CONFIG_OMAP2_DSS_RFBI is not set
+CONFIG_OMAP2_DSS_VENC=y
+CONFIG_OMAP2_VENC_OUT_TYPE_SVIDEO=y
+# CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE is not set
+# CONFIG_OMAP2_DSS_SDI is not set
+CONFIG_OMAP2_DSS_DSI=y
+CONFIG_OMAP2_DSS_USE_DSI_PLL=y
+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
+CONFIG_FB_OMAP2=y
+CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
+# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
+CONFIG_FB_OMAP2_NUM_FBS=3
+
+#
+# OMAP2/3 Display Device Drivers
+#
+CONFIG_PANEL_GENERIC=y
+# CONFIG_PANEL_LGPHILIPS_LB035Q02 is not set
+# CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C is not set
+CONFIG_PANEL_SHARP_LS037V7DW01=y
+CONFIG_PANEL_SHARP_LQ043T1DG01=y
+# CONFIG_PANEL_TAAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_LMS283GF05 is not set
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+CONFIG_LCD_PLATFORM=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_RAWMIDI_SEQ=m
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+CONFIG_SND_VIRMIDI=m
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_MCBSP=y
+CONFIG_SND_OMAP_SOC_OMAP3_TOUCHBOOK=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_TWL4030=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+CONFIG_HID_AI=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+# CONFIG_HID_DRAGONRISE is not set
+CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
+CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+CONFIG_HID_TOPSEED=y
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_OXU210HP_HCD=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_U132_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+CONFIG_MUSB_USE_SYSTEM_DMA_RX=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_TI_CPPI41_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP210X is not set
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+# CONFIG_USB_SERIAL_SYMBOL is not set
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_BERRY_CHARGE=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+# CONFIG_USB_APPLEDISPLAY is not set
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+CONFIG_USB_VST=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ZERO_HNPTEST=y
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_MASS_STORAGE is not set
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_MIDI_GADGET=m
+CONFIG_USB_G_PRINTER=m
+CONFIG_USB_CDC_COMPOSITE=m
+# CONFIG_USB_G_MULTI is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=y
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_USB_ULPI is not set
+CONFIG_TWL4030_USB=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+CONFIG_RTC_DRV_TWL4030=y
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+
+#
+# TI VLYNQ
+#
+CONFIG_STAGING=y
+# CONFIG_STAGING_EXCLUDE_BUILD is not set
+# CONFIG_USB_IP_COMMON is not set
+CONFIG_W35UND=m
+CONFIG_PRISM2_USB=m
+# CONFIG_ECHO is not set
+CONFIG_OTUS=m
+# CONFIG_COMEDI is not set
+# CONFIG_ASUS_OLED is not set
+# CONFIG_INPUT_MIMIO is not set
+# CONFIG_TRANZPORT is not set
+
+#
+# Qualcomm MSM Camera And Video
+#
+
+#
+# Camera Sensor Selection
+#
+# CONFIG_INPUT_GPIO is not set
+# CONFIG_DST is not set
+# CONFIG_POHMELFS is not set
+# CONFIG_PLAN9AUTH is not set
+# CONFIG_LINE6_USB is not set
+# CONFIG_USB_SERIAL_QUATECH2 is not set
+# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
+# CONFIG_VT6656 is not set
+# CONFIG_FB_UDL is not set
+
+#
+# RAR Register Driver
+#
+# CONFIG_RAR_REGISTER is not set
+# CONFIG_IIO is not set
+# CONFIG_RAMZSWAP is not set
+# CONFIG_BATMAN_ADV is not set
+# CONFIG_STRIP is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_FS_JOURNAL_INFO=y
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=m
+CONFIG_EXT4_FS_XATTR=y
+# CONFIG_EXT4_FS_POSIX_ACL is not set
+# CONFIG_EXT4_FS_SECURITY is not set
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=m
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+CONFIG_REISERFS_PROC_INFO=y
+CONFIG_REISERFS_FS_XATTR=y
+# CONFIG_REISERFS_FS_POSIX_ACL is not set
+# CONFIG_REISERFS_FS_SECURITY is not set
+CONFIG_JFS_FS=m
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=m
+# CONFIG_GFS2_FS_LOCKING_DLM is not set
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+CONFIG_OCFS2_FS_STATS=y
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+CONFIG_BTRFS_FS=m
+# CONFIG_BTRFS_FS_POSIX_ACL is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=y
+# CONFIG_CUSE is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+# CONFIG_ECRYPT_FS is not set
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+# CONFIG_JFFS2_CMODE_PRIORITY is not set
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_JFFS2_CMODE_FAVOURLZO=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_ROMFS_FS=m
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_STATS2=y
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+CONFIG_CIFS_EXPERIMENTAL=y
+CONFIG_NCP_FS=m
+# CONFIG_NCPFS_PACKET_SIGNING is not set
+# CONFIG_NCPFS_IOCTL_LOCKING is not set
+# CONFIG_NCPFS_STRONG is not set
+# CONFIG_NCPFS_NFS_NS is not set
+# CONFIG_NCPFS_OS2_NS is not set
+# CONFIG_NCPFS_SMALLDOS is not set
+# CONFIG_NCPFS_NLS is not set
+# CONFIG_NCPFS_EXTRAS is not set
+CONFIG_CODA_FS=m
+CONFIG_AFS_FS=m
+# CONFIG_AFS_DEBUG is not set
+CONFIG_9P_FS=m
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+# CONFIG_UNIXWARE_DISKLABEL is not set
+CONFIG_LDM_PARTITION=y
+CONFIG_LDM_DEBUG=y
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
+CONFIG_ASYNC_PQ=m
+CONFIG_ASYNC_RAID6_RECOV=m
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_FIPS=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_GHASH=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_HW=y
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3evm/defconfig b/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3evm/defconfig
new file mode 100644
index 0000000..5508dc5
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/omap3evm/defconfig
@@ -0,0 +1,3088 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32
+# Wed Jul 28 15:05:34 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_OPROFILE_ARMV7=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_SLOW_WORK=y
+# CONFIG_SLOW_WORK_DEBUG is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+CONFIG_OMAP_SMARTREFLEX=y
+# CONFIG_OMAP_SMARTREFLEX_TESTING is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+CONFIG_OMAP_MBOX_FWK=m
+CONFIG_OMAP_IOMMU=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
+# CONFIG_OMAP3_DEBOBS is not set
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+# CONFIG_OMAP_LL_DEBUG_NONE is not set
+# CONFIG_OMAP_PM_NONE is not set
+# CONFIG_OMAP_PM_NOOP is not set
+CONFIG_OMAP_PM_SRF=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+CONFIG_OMAP_PACKAGE_CBB=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+CONFIG_MACH_OMAP3EVM=y
+CONFIG_PMIC_TWL4030=y
+# CONFIG_MACH_OMAP3517EVM is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_OMAP_ZOOM3 is not set
+# CONFIG_MACH_CM_T35 is not set
+# CONFIG_MACH_IGEP0020 is not set
+# CONFIG_MACH_OMAP_3630SDP is not set
+# CONFIG_OMAP3_EMU is not set
+# CONFIG_OMAP3_SDRC_AC_TIMING is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_THUMBEE=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_USER_L2_PLE=y
+CONFIG_USER_PMON=y
+CONFIG_ARM_ERRATA_430973=y
+CONFIG_ARM_ERRATA_458693=y
+CONFIG_ARM_ERRATA_460075=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_LEDS=y
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+CONFIG_CPU_V7_SYSFS=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=" debug "
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_DEBUG=y
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+# CONFIG_DEFAULT_BIC is not set
+CONFIG_DEFAULT_CUBIC=y
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+# CONFIG_IPV6_PIMSM_V2 is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+CONFIG_IP_VS=m
+CONFIG_IP_VS_IPV6=y
+CONFIG_IP_VS_DEBUG=y
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=y
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=y
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_RDS is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=m
+# CONFIG_CAN_DEV is not set
+# CONFIG_CAN_DEBUG_DEVICES is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_ULTRA=y
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+CONFIG_IRDA_DEBUG=y
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+CONFIG_DONGLE=y
+CONFIG_ESI_DONGLE=m
+CONFIG_ACTISYS_DONGLE=m
+CONFIG_TEKRAM_DONGLE=m
+CONFIG_TOIM3232_DONGLE=m
+CONFIG_LITELINK_DONGLE=m
+CONFIG_MA600_DONGLE=m
+CONFIG_GIRBIL_DONGLE=m
+CONFIG_MCP2120_DONGLE=m
+CONFIG_OLD_BELKIN_DONGLE=m
+# CONFIG_ACT200L_DONGLE is not set
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_MRVL is not set
+CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_DEBUG is not set
+# CONFIG_RXKAD is not set
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_RC_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_WIMAX=m
+CONFIG_WIMAX_DEBUG_LEVEL=8
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_NET_9P=m
+# CONFIG_NET_9P_DEBUG is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=""
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_OMAP_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_OMAP_PREFETCH=y
+# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+# CONFIG_MTD_ONENAND_GENERIC is not set
+CONFIG_MTD_ONENAND_OMAP2=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
+# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+CONFIG_EEPROM_93CX6=m
+CONFIG_IWMC3200TOP=m
+# CONFIG_IWMC3200TOP_DEBUG is not set
+# CONFIG_IWMC3200TOP_DEBUGFS is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID6_PQ=m
+# CONFIG_ASYNC_RAID6_TEST is not set
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+# CONFIG_DM_LOG_USERSPACE is not set
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+# CONFIG_DM_MULTIPATH_QL is not set
+# CONFIG_DM_MULTIPATH_ST is not set
+CONFIG_DM_DELAY=m
+# CONFIG_DM_UEVENT is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_TI_DAVINCI_EMAC is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_LIBERTAS_THINFIRM is not set
+CONFIG_AT76C50X_USB=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_ATH_COMMON is not set
+CONFIG_B43=m
+# CONFIG_B43_SDIO is not set
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+# CONFIG_B43LEGACY is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+# CONFIG_IWM is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+# CONFIG_LIBERTAS_SDIO is not set
+# CONFIG_LIBERTAS_SPI is not set
+# CONFIG_LIBERTAS_DEBUG is not set
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+# CONFIG_P54_SPI is not set
+CONFIG_P54_LEDS=y
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+# CONFIG_RT2800USB is not set
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_WL12XX=m
+CONFIG_WL1251=m
+CONFIG_WL1251_SPI=m
+CONFIG_WL1251_SDIO=m
+CONFIG_WL1271=m
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+
+#
+# WiMAX Wireless Broadband devices
+#
+CONFIG_WIMAX_I2400M=m
+CONFIG_WIMAX_I2400M_USB=m
+CONFIG_WIMAX_I2400M_SDIO=m
+CONFIG_WIMAX_IWMC3200_SDIO=y
+CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=y
+CONFIG_USB_KAWETH=y
+CONFIG_USB_PEGASUS=y
+CONFIG_USB_RTL8150=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_CDC_EEM is not set
+CONFIG_USB_NET_DM9601=y
+CONFIG_USB_NET_SMSC95XX=y
+CONFIG_USB_NET_GL620A=y
+CONFIG_USB_NET_NET1080=y
+CONFIG_USB_NET_PLUSB=y
+CONFIG_USB_NET_MCS7830=y
+CONFIG_USB_NET_RNDIS_HOST=y
+CONFIG_USB_NET_CDC_SUBSET=y
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+CONFIG_USB_NET_ZAURUS=y
+CONFIG_USB_HSO=m
+CONFIG_USB_NET_INT51X1=m
+# CONFIG_WAN is not set
+CONFIG_ATM_DRIVERS=y
+# CONFIG_ATM_DUMMY is not set
+# CONFIG_ATM_TCP is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_PPPOATM is not set
+CONFIG_PPPOL2TP=m
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_TWL4030=y
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_TSC2004 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_TWL4030_PWRBUTTON=y
+CONFIG_INPUT_UINPUT=y
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+# CONFIG_SPI_XILINX is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=m
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+CONFIG_THERMAL=y
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+# CONFIG_TWL4030_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+# CONFIG_SSB_SDIOHOST is not set
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSB_DEBUG is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+CONFIG_TWL4030_POWER=y
+CONFIG_TWL4030_CODEC=y
+# CONFIG_TWL4030_MADC is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+CONFIG_MEDIA_TUNER_CUSTOMISE=y
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_SG=y
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_IR=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+CONFIG_VIDEO_MSP3400=m
+# CONFIG_VIDEO_CS5345 is not set
+CONFIG_VIDEO_CS53L32A=m
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+CONFIG_VIDEO_WM8775=m
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# RDS decoders
+#
+# CONFIG_VIDEO_SAA6588 is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_ADV7180 is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_OV7670 is not set
+CONFIG_VIDEO_MT9V011=m
+CONFIG_VIDEO_MT9V113=m
+# CONFIG_VIDEO_TCM825X is not set
+CONFIG_VIDEO_MT9P012=m
+CONFIG_VIDEO_MT9T112=m
+# CONFIG_VIDEO_DW9710 is not set
+# CONFIG_VIDEO_OV3640 is not set
+# CONFIG_VIDEO_IMX046 is not set
+# CONFIG_VIDEO_LV8093 is not set
+# CONFIG_VIDEO_SAA7110 is not set
+CONFIG_VIDEO_SAA711X=m
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_SAA7191 is not set
+CONFIG_VIDEO_TVP514X=y
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_VPX3220 is not set
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+CONFIG_VIDEO_VIVI=m
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_AU0828 is not set
+CONFIG_TI_MEDIA=y
+CONFIG_VIDEO_VPSS_SYSTEM=y
+# CONFIG_VIDEO_VPFE_CAPTURE is not set
+CONFIG_VIDEO_OMAP2_VOUT=y
+CONFIG_VIDEO_OMAP3=y
+CONFIG_VIDEO_OMAP3_ISP=y
+CONFIG_VIDEO_OMAP34XX_ISP_PREVIEWER=y
+CONFIG_VIDEO_OMAP34XX_ISP_RESIZER=y
+# CONFIG_SOC_CAMERA is not set
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+# CONFIG_USB_GL860 is not set
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+# CONFIG_USB_GSPCA_JEILINJ is not set
+CONFIG_USB_GSPCA_MARS=m
+# CONFIG_USB_GSPCA_MR97310A is not set
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_PAC207=m
+# CONFIG_USB_GSPCA_PAC7302 is not set
+CONFIG_USB_GSPCA_PAC7311=m
+# CONFIG_USB_GSPCA_SN9C20X is not set
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+CONFIG_USB_GSPCA_STK014=m
+# CONFIG_USB_GSPCA_STV0680 is not set
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_CX231XX=m
+# CONFIG_VIDEO_CX231XX_ALSA is not set
+CONFIG_VIDEO_CX231XX_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_VIDEO_USBVIDEO=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+CONFIG_USB_QUICKCAM_MESSENGER=m
+CONFIG_USB_ET61X251=m
+CONFIG_VIDEO_OVCAMCHIP=m
+CONFIG_USB_W9968CF=m
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+CONFIG_USB_ZC0301=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_I2C_SI4713 is not set
+# CONFIG_RADIO_SI4713 is not set
+# CONFIG_USB_DSBR is not set
+# CONFIG_RADIO_SI470X is not set
+# CONFIG_USB_MR800 is not set
+# CONFIG_RADIO_TEA5764 is not set
+# CONFIG_RADIO_TEF6862 is not set
+CONFIG_DVB_MAX_ADAPTERS=8
+CONFIG_DVB_DYNAMIC_MINORS=y
+CONFIG_DVB_CAPTURE_DRIVERS=y
+# CONFIG_TTPCI_EEPROM is not set
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_DW2102=m
+CONFIG_DVB_USB_CINERGY_T2=m
+CONFIG_DVB_USB_ANYSEE=m
+CONFIG_DVB_USB_DTV5100=m
+CONFIG_DVB_USB_AF9015=m
+# CONFIG_DVB_USB_CE6230 is not set
+# CONFIG_DVB_USB_FRIIO is not set
+# CONFIG_DVB_USB_EC168 is not set
+# CONFIG_SMS_SIANO_MDTV is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_ZL10039=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_SI21XX=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_AF9013=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_S5H1411=m
+CONFIG_DVB_DIB8000=m
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_LGS8GL5=m
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_TMIO is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_OMAP2_VRAM=y
+CONFIG_OMAP2_VRFB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=14
+CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
+# CONFIG_OMAP2_DSS_RFBI is not set
+CONFIG_OMAP2_DSS_VENC=y
+CONFIG_OMAP2_VENC_OUT_TYPE_SVIDEO=y
+# CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE is not set
+# CONFIG_OMAP2_DSS_SDI is not set
+CONFIG_OMAP2_DSS_DSI=y
+CONFIG_OMAP2_DSS_USE_DSI_PLL=y
+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
+CONFIG_FB_OMAP2=y
+CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
+# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
+CONFIG_FB_OMAP2_NUM_FBS=3
+
+#
+# OMAP2/3 Display Device Drivers
+#
+CONFIG_PANEL_GENERIC=y
+# CONFIG_PANEL_LGPHILIPS_LB035Q02 is not set
+# CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C is not set
+CONFIG_PANEL_SHARP_LS037V7DW01=y
+# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set
+# CONFIG_PANEL_TAAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_RAWMIDI_SEQ=m
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=y
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_MCBSP=y
+CONFIG_SND_OMAP_SOC_OMAP3EVM=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_TWL4030=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+# CONFIG_HID_DRAGONRISE is not set
+CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
+CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+CONFIG_HID_TOPSEED=y
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_U132_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+CONFIG_MUSB_USE_SYSTEM_DMA_RX=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_TI_CPPI41_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP210X is not set
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+# CONFIG_USB_SERIAL_SYMBOL is not set
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_BERRY_CHARGE=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+# CONFIG_USB_APPLEDISPLAY is not set
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+CONFIG_USB_VST=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ZERO_HNPTEST=y
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_MASS_STORAGE is not set
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_MIDI_GADGET=m
+CONFIG_USB_G_PRINTER=m
+CONFIG_USB_CDC_COMPOSITE=m
+# CONFIG_USB_G_MULTI is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=y
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_USB_ULPI is not set
+CONFIG_TWL4030_USB=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+CONFIG_RTC_DRV_TWL4030=m
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+
+#
+# TI VLYNQ
+#
+CONFIG_STAGING=y
+# CONFIG_STAGING_EXCLUDE_BUILD is not set
+# CONFIG_USB_IP_COMMON is not set
+CONFIG_W35UND=m
+# CONFIG_PRISM2_USB is not set
+CONFIG_ECHO=m
+CONFIG_OTUS=m
+# CONFIG_COMEDI is not set
+# CONFIG_ASUS_OLED is not set
+CONFIG_RTL8192SU=m
+# CONFIG_INPUT_MIMIO is not set
+# CONFIG_TRANZPORT is not set
+
+#
+# Qualcomm MSM Camera And Video
+#
+
+#
+# Camera Sensor Selection
+#
+# CONFIG_INPUT_GPIO is not set
+# CONFIG_DST is not set
+# CONFIG_POHMELFS is not set
+# CONFIG_PLAN9AUTH is not set
+# CONFIG_LINE6_USB is not set
+# CONFIG_USB_SERIAL_QUATECH2 is not set
+# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
+# CONFIG_VT6656 is not set
+# CONFIG_FB_UDL is not set
+
+#
+# RAR Register Driver
+#
+# CONFIG_RAR_REGISTER is not set
+# CONFIG_IIO is not set
+# CONFIG_RAMZSWAP is not set
+# CONFIG_BATMAN_ADV is not set
+# CONFIG_STRIP is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_FS_JOURNAL_INFO=y
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+# CONFIG_EXT4_FS_POSIX_ACL is not set
+# CONFIG_EXT4_FS_SECURITY is not set
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+CONFIG_REISERFS_PROC_INFO=y
+CONFIG_REISERFS_FS_XATTR=y
+# CONFIG_REISERFS_FS_POSIX_ACL is not set
+# CONFIG_REISERFS_FS_SECURITY is not set
+CONFIG_JFS_FS=m
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=m
+# CONFIG_GFS2_FS_LOCKING_DLM is not set
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+CONFIG_OCFS2_FS_STATS=y
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+CONFIG_BTRFS_FS=m
+# CONFIG_BTRFS_FS_POSIX_ACL is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+# CONFIG_CUSE is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+# CONFIG_ECRYPT_FS is not set
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+# CONFIG_JFFS2_CMODE_PRIORITY is not set
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_JFFS2_CMODE_FAVOURLZO=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_ROMFS_FS=m
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_STATS2=y
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+CONFIG_CIFS_EXPERIMENTAL=y
+CONFIG_NCP_FS=m
+# CONFIG_NCPFS_PACKET_SIGNING is not set
+# CONFIG_NCPFS_IOCTL_LOCKING is not set
+# CONFIG_NCPFS_STRONG is not set
+# CONFIG_NCPFS_NFS_NS is not set
+# CONFIG_NCPFS_OS2_NS is not set
+# CONFIG_NCPFS_SMALLDOS is not set
+# CONFIG_NCPFS_NLS is not set
+# CONFIG_NCPFS_EXTRAS is not set
+CONFIG_CODA_FS=m
+CONFIG_AFS_FS=m
+# CONFIG_AFS_DEBUG is not set
+CONFIG_9P_FS=m
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+# CONFIG_UNIXWARE_DISKLABEL is not set
+CONFIG_LDM_PARTITION=y
+CONFIG_LDM_DEBUG=y
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
+CONFIG_ASYNC_PQ=m
+CONFIG_ASYNC_RAID6_RECOV=m
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_FIPS=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_GHASH=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_HW=y
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/overo/defconfig b/recipes-bsp/linux/linux-omap-psp-2.6.32/overo/defconfig
new file mode 100644
index 0000000..be4375e
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/overo/defconfig
@@ -0,0 +1,2467 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32
+# Thu Mar 11 14:23:41 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_OPROFILE_ARMV7=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+CONFIG_OMAP_SMARTREFLEX=y
+# CONFIG_OMAP_SMARTREFLEX_TESTING is not set
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_MUX is not set
+CONFIG_OMAP_MCBSP=y
+CONFIG_OMAP_MBOX_FWK=m
+CONFIG_OMAP_IOMMU=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
+# CONFIG_OMAP3_DEBOBS is not set
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_LL_DEBUG_NONE is not set
+# CONFIG_OMAP_PM_NONE is not set
+# CONFIG_OMAP_PM_NOOP is not set
+CONFIG_OMAP_PM_SRF=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+CONFIG_OMAP_PACKAGE_CBB=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+CONFIG_MACH_OVERO=y
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_OMAP3517EVM is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_OMAP_ZOOM3 is not set
+# CONFIG_MACH_CM_T35 is not set
+# CONFIG_MACH_IGEP0020 is not set
+# CONFIG_MACH_OMAP_3630SDP is not set
+# CONFIG_OMAP3_EMU is not set
+# CONFIG_OMAP3_SDRC_AC_TIMING is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_THUMBEE=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_LEDS=y
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=" debug "
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_DEBUG=y
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=y
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIVHCI=m
+# CONFIG_BT_MRVL is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=y
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=y
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_RC_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=""
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_OMAP_PREFETCH=y
+# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=y
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_EEPROM_93CX6=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID6_PQ=m
+# CONFIG_ASYNC_RAID6_TEST is not set
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+# CONFIG_DM_LOG_USERSPACE is not set
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+# CONFIG_DM_MULTIPATH_QL is not set
+# CONFIG_DM_MULTIPATH_ST is not set
+CONFIG_DM_DELAY=m
+# CONFIG_DM_UEVENT is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_TI_DAVINCI_EMAC is not set
+# CONFIG_DM9000 is not set
+CONFIG_ENC28J60=m
+# CONFIG_ENC28J60_WRITEVERIFY is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_AT76C50X_USB is not set
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_ATH_COMMON is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+# CONFIG_IWM is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_SPI is not set
+CONFIG_LIBERTAS_DEBUG=y
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+# CONFIG_P54_SPI is not set
+CONFIG_P54_LEDS=y
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+# CONFIG_RT2800USB is not set
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+# CONFIG_WL12XX is not set
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_CDC_EEM is not set
+CONFIG_USB_NET_DM9601=m
+# CONFIG_USB_NET_SMSC95XX is not set
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=m
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_TWL4030 is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=m
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_TSC2004 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+# CONFIG_SPI_XILINX is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=m
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+# CONFIG_TWL4030_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_TWL4030_POWER is not set
+CONFIG_TWL4030_CODEC=y
+CONFIG_TWL4030_MADC=y
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_SG=y
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_CX25840=m
+CONFIG_VIDEO_CX2341X=m
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_AU0828 is not set
+CONFIG_TI_MEDIA=y
+CONFIG_VIDEO_VPSS_SYSTEM=m
+# CONFIG_VIDEO_VPFE_CAPTURE is not set
+CONFIG_VIDEO_OMAP2_VOUT=y
+CONFIG_VIDEO_OMAP3=y
+CONFIG_VIDEO_OMAP3_ISP=y
+CONFIG_VIDEO_OMAP34XX_ISP_PREVIEWER=y
+CONFIG_VIDEO_OMAP34XX_ISP_RESIZER=y
+# CONFIG_SOC_CAMERA is not set
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+# CONFIG_USB_GL860 is not set
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+# CONFIG_USB_GSPCA_JEILINJ is not set
+CONFIG_USB_GSPCA_MARS=m
+# CONFIG_USB_GSPCA_MR97310A is not set
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_PAC207=m
+# CONFIG_USB_GSPCA_PAC7302 is not set
+CONFIG_USB_GSPCA_PAC7311=m
+# CONFIG_USB_GSPCA_SN9C20X is not set
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+CONFIG_USB_GSPCA_STK014=m
+# CONFIG_USB_GSPCA_STV0680 is not set
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+# CONFIG_VIDEO_HDPVR is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_CX231XX is not set
+CONFIG_VIDEO_USBVISION=m
+CONFIG_VIDEO_USBVIDEO=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+CONFIG_USB_QUICKCAM_MESSENGER=m
+CONFIG_USB_ET61X251=m
+CONFIG_VIDEO_OVCAMCHIP=m
+CONFIG_USB_W9968CF=m
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+# CONFIG_USB_ZC0301 is not set
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+CONFIG_USB_ZR364XX=m
+# CONFIG_USB_STKWEBCAM is not set
+CONFIG_USB_S2255=m
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_I2C_SI4713 is not set
+# CONFIG_RADIO_SI4713 is not set
+# CONFIG_USB_DSBR is not set
+# CONFIG_RADIO_SI470X is not set
+# CONFIG_USB_MR800 is not set
+# CONFIG_RADIO_TEA5764 is not set
+# CONFIG_RADIO_TEF6862 is not set
+CONFIG_DVB_MAX_ADAPTERS=8
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+# CONFIG_TTPCI_EEPROM is not set
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+# CONFIG_DVB_USB_DW2102 is not set
+# CONFIG_DVB_USB_CINERGY_T2 is not set
+# CONFIG_DVB_USB_ANYSEE is not set
+# CONFIG_DVB_USB_DTV5100 is not set
+# CONFIG_DVB_USB_AF9015 is not set
+# CONFIG_DVB_USB_CE6230 is not set
+# CONFIG_DVB_USB_FRIIO is not set
+# CONFIG_DVB_USB_EC168 is not set
+# CONFIG_SMS_SIANO_MDTV is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+# CONFIG_DVB_B2C2_FLEXCOP is not set
+
+#
+# Supported DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_S5H1411=m
+CONFIG_DVB_DIB8000=m
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_LGS8GL5=m
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_TMIO is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_OMAP2_VRAM=y
+CONFIG_OMAP2_VRFB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=0
+CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
+# CONFIG_OMAP2_DSS_RFBI is not set
+CONFIG_OMAP2_DSS_VENC=y
+CONFIG_OMAP2_VENC_OUT_TYPE_SVIDEO=y
+# CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE is not set
+# CONFIG_OMAP2_DSS_SDI is not set
+# CONFIG_OMAP2_DSS_DSI is not set
+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
+CONFIG_FB_OMAP2=y
+CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
+# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
+CONFIG_FB_OMAP2_NUM_FBS=3
+
+#
+# OMAP2/3 Display Device Drivers
+#
+CONFIG_PANEL_GENERIC=y
+CONFIG_PANEL_LGPHILIPS_LB035Q02=y
+CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C=y
+CONFIG_PANEL_SHARP_LS037V7DW01=y
+# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_LMS283GF05 is not set
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+CONFIG_BACKLIGHT_GENERIC=m
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+# CONFIG_SND_DEBUG_VERBOSE is not set
+# CONFIG_SND_PCM_XRUN_DEBUG is not set
+CONFIG_SND_RAWMIDI_SEQ=m
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=y
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_MCBSP=y
+CONFIG_SND_OMAP_SOC_OVERO=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_TWL4030=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+# CONFIG_HID_DRAGONRISE is not set
+CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
+CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_OTG is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+CONFIG_MUSB_USE_SYSTEM_DMA_RX=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_TI_CPPI41_DMA is not set
+CONFIG_USB_MUSB_DEBUG=y
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+# CONFIG_USB_SERIAL_SYMBOL is not set
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+# CONFIG_USB_BERRY_CHARGE is not set
+CONFIG_USB_LED=m
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=500
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_MASS_STORAGE is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_G_PRINTER=m
+CONFIG_USB_CDC_COMPOSITE=m
+# CONFIG_USB_G_MULTI is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_USB_ULPI is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+CONFIG_RTC_DRV_TWL4030=y
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_FS_JOURNAL_INFO=y
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+# CONFIG_CUSE is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+CONFIG_UBIFS_FS_DEBUG=y
+CONFIG_UBIFS_FS_DEBUG_MSG_LVL=3
+# CONFIG_UBIFS_FS_DEBUG_CHKS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
+CONFIG_ASYNC_PQ=m
+CONFIG_ASYNC_RAID6_RECOV=m
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=m
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/recipes-bsp/linux/linux-omap-psp-2.6.32/porches.patch b/recipes-bsp/linux/linux-omap-psp-2.6.32/porches.patch
new file mode 100644
index 0000000..630af6f
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp-2.6.32/porches.patch
@@ -0,0 +1,55 @@
+From 00a84122fd2c1974f6dc79fce11a34154caab848 Mon Sep 17 00:00:00 2001
+From: Tasslehoff Kjappfot <tasskjapp@gmail.com>
+Date: Wed, 8 Sep 2010 12:46:14 +0200
+Subject: [PATCH] OMAP: DSS2: OMAPFB: swap front and back porches for both hsync and vsync
+
+Framebuffer's left and right margins are relative to the active pixel
+area. Front and back porches are relative to the sync area.
+
+Left margin was wrongly assigned to front porch (and right to back),
+this patch fixes it.
+
+Signed-off-by: tasskjapp@gmail.com
+Reviewed-by: Russ.Dill@gmail.com
+Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+---
+ drivers/video/omap2/omapfb/omapfb-main.c |   16 ++++++++--------
+ 1 files changed, 8 insertions(+), 8 deletions(-)
+
+diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
+index 39f53b1..bddfca6 100644
+--- a/drivers/video/omap2/omapfb/omapfb-main.c
++++ b/drivers/video/omap2/omapfb/omapfb-main.c
+@@ -714,10 +714,10 @@ int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var)
+ 		var->pixclock = timings.pixel_clock != 0 ?
+ 			KHZ2PICOS(timings.pixel_clock) :
+ 			0;
+-		var->left_margin = timings.hfp;
+-		var->right_margin = timings.hbp;
+-		var->upper_margin = timings.vfp;
+-		var->lower_margin = timings.vbp;
++		var->left_margin = timings.hbp;
++		var->right_margin = timings.hfp;
++		var->upper_margin = timings.vbp;
++		var->lower_margin = timings.vfp;
+ 		var->hsync_len = timings.hsw;
+ 		var->vsync_len = timings.vsw;
+ 	} else {
+@@ -2059,10 +2059,10 @@ static int omapfb_mode_to_timings(const char *mode_str,
+ 
+ 	if (r != 0) {
+ 		timings->pixel_clock = PICOS2KHZ(var.pixclock);
+-		timings->hfp = var.left_margin;
+-		timings->hbp = var.right_margin;
+-		timings->vfp = var.upper_margin;
+-		timings->vbp = var.lower_margin;
++		timings->hbp = var.left_margin;
++		timings->hfp = var.right_margin;
++		timings->vbp = var.upper_margin;
++		timings->vfp = var.lower_margin;
+ 		timings->hsw = var.hsync_len;
+ 		timings->vsw = var.vsync_len;
+ 		timings->x_res = var.xres;
+-- 
+1.6.1
+
diff --git a/recipes-bsp/linux/linux-omap-psp_2.6.32.bb b/recipes-bsp/linux/linux-omap-psp_2.6.32.bb
new file mode 100644
index 0000000..955907c
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap-psp_2.6.32.bb
@@ -0,0 +1,176 @@
+require multi-kernel.inc
+
+DESCRIPTION = "Linux kernel for OMAP processors"
+KERNEL_IMAGETYPE = "uImage"
+
+COMPATIBLE_MACHINE = "beagleboard|omap3evm|am3517-evm|dm37x-evm|am37x-evm|omap3-touchbook|overo"
+
+# This is on the master branch
+SRCREV = "5fc29e7b2a76a64a739f857858ef0b98294aa155"
+
+# The main PR is now using MACHINE_KERNEL_PR, for omap3 see conf/machine/include/omap3.inc
+MACHINE_KERNEL_PR_append = "+gitr${SRCREV}"
+
+SRC_URI = "git://arago-project.org/git/projects/linux-omap3.git;protocol=http;branch=master \
+           file://0001-Revert-omap3-beagle-Fix-compile-time-errors.patch \
+           file://0002-board-omap3touchbook-make-it-build-against-TI-linux-.patch \
+           file://0003-ARM-OMAP-add-support-for-TCT-Zippy-to-Beagle-board-f.patch \
+           file://0004-ARM-OMAP-Make-beagle-u-boot-partition-writable.patch \
+           file://0005-board-omap3-beagle-add-DSS2-support.patch \
+           file://0006-board-omap3beagle-prepare-for-DM3730-based-Beagleboa.patch \
+           file://0007-ARM-OMAP-beagleboard-Add-infrastructure-to-do-fixups.patch \
+           file://0008-ARM-OMAP-beagleboard-pre-export-GPIOs-to-userspace-w.patch \
+           file://0009-ARM-OMAP-beagleboard-initialize-ds1307-and-eeprom-on.patch \
+           file://0010-ARM-OMAP-update-beagleboard-defconfig.patch \
+           file://0011-ASoC-enable-audio-capture-by-default-for-twl4030.patch \
+           file://0012-MTD-NAND-omap2-proper-fix-for-subpage-read-ECC-error.patch \
+           file://0013-OMAP3630-DSS2-Enable-Pre-Multiplied-Alpha-Support.patch \
+           file://0014-DSS2-add-bootarg-for-selecting-svideo-or-composite-f.patch \
+           file://0015-ISP-add-some-more-from-Leopard-imaging-patch.patch \
+           file://0016-ARM-OMAP-Overo-Add-support-for-second-ethernet-port.patch \
+           file://0017-drivers-net-smsc911x-return-ENODEV-if-device-is-not-.patch \
+           file://0018-drivers-input-touchscreen-ads7846-return-ENODEV-if-d.patch \
+           file://0019-drivers-mfd-add-twl4030-madc-driver.patch \
+           file://0020-ARM-OMAP-Add-missing-twl4030-madc-header-file.patch \
+           file://0021-ARM-OMAP-Add-twl4030-madc-support-to-Overo.patch \
+           file://0022-ARM-OMAP-Add-twl4030-madc-support-to-Beagle.patch \
+           file://0023-netdev-rt73usb-add-vendor-device-ID-for-Ceiva-Wirele.patch \
+           file://0024-mmc-don-t-display-single-block-read-console-messages.patch \
+           file://0025-ARM-OMAP2-mmc-twl4030-move-clock-input-selection-pri.patch \
+           file://0026-board-overo-add-PM-code-and-sync-with-http-www.sakom.patch \
+           file://0027-twl4030-madc-adjust-for-twl4030-twl-api-changes.patch \
+           file://0028-OMAP-DSS2-Re-add-support-for-Samsung-lte430wq-f0c-pa.patch \
+           file://0029-OMAP-DSS2-Add-support-for-LG-Philips-LB035Q02-panel.patch \
+           file://0030-Fix-for-bus-width-which-improves-SD-card-s-peformanc.patch \
+           file://0031-ARM-VFP-add-support-to-sync-the-VFP-state-of-the-cur.patch \
+           file://0032-ARM-VFP-preserve-the-HW-context-when-calling-signal-.patch \
+           file://0033-Switch-SGX-clocks-to-200MHz-on-DM37xx-OMAP36xx.patch \
+           file://0034-modedb.c-add-proper-720p60-mode.patch \
+           file://0035-RTC-add-support-for-backup-battery-recharge.patch \
+           file://0036-ARM-Add-prompt-for-CONFIG_ALIGNMENT_TRAP.patch \
+           file://0037-ARM-Print-warning-on-alignment-trap-in-kernel-mode.patch \
+           file://0038-ARM-Expose-some-CPU-control-registers-via-sysfs.patch \
+           file://0039-ARM-Add-option-to-allow-userspace-PLE-access.patch \
+           file://0040-ARM-Add-option-to-allow-userspace-access-to-performa.patch \
+           file://0041-ARM-Expose-some-PMON-registers-through-sysfs.patch \
+           file://0042-musb-allow-host-io-without-gadget-module.patch \
+           file://0043-MTD-silence-ecc-errors-on-mtdblock0.patch \
+           file://0044-ARM-OMAP-beagle-every-known-beagle-except-revB-uses-.patch \
+           file://0045-ARM-OMAP-beagle-add-support-for-beagleFPGA-expansion.patch \
+           file://cam/0001-mt9t111-first-stab-at-merging-sensor-driver-based-on.patch \
+           file://cam/0002-mt9t111-Fix-all-checkpatch-errors.patch \
+           file://cam/0003-mt9t111-Pass-v4l2_int_device-data.patch \
+           file://cam/0004-omap3beagle-Add-camera-support.patch \
+           file://cam/0005-TEMP-omap3beagle-camera-Add-defconfig.patch \
+           file://cam/0006-omap3beagle-camera-Add-support-for-regulators.patch \
+           file://cam/0007-TEMP-omap3beagle-cam-Enable-OMAP_MUX.patch \
+           file://cam/0008-omap3beagle-camera-Fix-null-pointer-dereference.patch \
+           file://cam/0009-Revert-TEMP-omap3beagle-cam-Enable-OMAP_MUX.patch \  
+           file://cam/0010-omap3beagle-camera-Change-arch-late_initcall.patch \ 
+           file://cam/0011-omap3beagle-camera-Move-i2c-registration-to-the-main.patch \
+           file://cam/0012-ARM-OMAP3-make-camera-code-build-if-MT9T111-is-built.patch \
+           file://cam/0013-DEBUG-omap3beagle-camera-Force-mode0-in-cam_xclka.patch \
+           file://cam/0014-OMAP3-CLOCK-Add-capability-to-change-rate-of-dpll4_m.patch \
+           file://cam/0015-Revert-DEBUG-omap3beagle-camera-Force-mode0-in-cam_x.patch \
+           file://cam/0016-omap3beagle-camera-Fix-wrong-XCLKA-selection.patch \ 
+           file://cam/0017-omap3isp-set-CAM_MCLK-to-172.8-MHz-allows-exact-9.6-.patch \
+           file://cam/0018-Fix-Moved-MCLK-setting-to-the-board-file.patch \
+           file://cam/0019-omap3isp-core-Do-smarter-MCLK-setting.patch \
+           file://cam/0020-omap3beagle-camera-set-mclk-for-mt9t111.patch \
+           file://cam/0021-mt9t111-Fix-max-supported-xclk.patch \
+           file://cam/0022-omap3beagle-camera-Clarify-regulators-names.patch \
+           file://cam/0023-omap3beagle-camera-Fix-powerup-sequence.patch \
+           file://cam/0024-omap3beagle-camera-Change-vaux4-to-1.8v.patch \
+           file://cam/0025-omap3beagle-camera-Rename-regulators-to-match-actual.patch \
+           file://cam/0026-omap3beagle-camera-Complement-remainig-sensor-hw-con.patch \
+           file://cam/0027-mt9t111-Fix-detect-function-retval-and-cleanup-print.patch \
+           file://cam/0028-omap3beagle-camera-Set-padconf-settings-in-cam-init.patch \
+           file://cam/0029-omap3beagle-camera-only-register-camera-driver-for-3.patch \
+           file://cam/0030-WIP-mt9t111-Work-in-progress-for-camera-enablement.patch \
+           file://cam/0031-BeagleXM-Cam-Add-support-for-MT9V113-VGA-Sensor.patch \
+           file://cam/0032-MT9V113-Fixed-sensor-nitialization-issues.patch \
+           file://cam/0033-mt9v113-Fix-wrong-active-widths.patch \
+           file://cam/0034-omap3isp-Fix-Wrong-check-on-non-interlaced-sensor-on.patch \
+           file://cam/0035-omap3isp-Fix-bad-YUV_BT-checks-in-datapath_config.patch \
+           file://cam/0036-omap3isp-Set-vd_pol-to-0-by-default-on-all-cases.patch \
+           file://cam/0037-omap3isp-ccdc-Set-datalines-to-10-for-YUV_SYNC.patch \
+           file://cam/0038-omap3beagle-camera-Fix-parallel-i-f-settings.patch \
+           file://cam/0039-omap3beagle-camera-Clean-up-Remove-unneccessary-code.patch \
+           file://cam/0040-mt9v113-Clean-Up-Remove-unneccessary-code-printf.patch \
+           file://cam/0041-MT9V113-Min-Max-clk-input-changed-as-per-the-spec.patch \
+           file://cam/0042-omap3beagle-camera-Further-clode-cleanup.patch \
+           file://cam/0043-mt9v113-Settings-from-Aptima-used-to-increase-FPS.patch \
+           file://cam/0044-mt9v113-AE-param-tuned-to-get-28-30FPS.patch \
+           file://cam/0045-omap3beagle-camera-Cleanup-of-boardfile.patch \
+           file://cam/0046-omap3beagle-camera-Cleanup-regulator-usage.patch \
+           file://cam/0047-omap3beagle-camera-Bring-back-mt9t111-support.patch \
+           file://cam/0048-REMOVE-v4l2-Delete-MT9T111-sensor-driver.patch \
+           file://cam/0049-V4L-DVB-13670-soc-camera-Add-mt9t112-camera-driver.patch \
+           file://cam/0050-soc-camera-mt9t112-modify-exiting-conditions-from-st.patch \
+           file://cam/0051-mt9t112-Migrate-from-soc_camera-to-v4l2-int-device.patch \
+           file://cam/0052-mt9t112-Add-more-info-to-public-header.patch \
+           file://cam/0053-mt9t112-Fix-null-pointer-kernel-bug.patch \
+           file://cam/0054-DEBUG-omap3beagle-Add-MT9T112-to-defconfig.patch \
+           file://cam/0055-omap3beagle-camera-Change-MT9T111-references-to-new-.patch \
+           file://cam/0056-omap34xxcam-Fix-multi-pixel-format-negotiation.patch \
+           file://cam/0057-SQUASH-omap3beagle-camera-Bring-back-mt9t111-support.patch \
+           file://cam/0058-mt9t112-Do-init_camera-every-powerup.patch \
+           file://cam/0059-omap3beagle-camera-Switch-flag-for-no-sensor-ISP.patch \
+           file://cam/0060-mt9t112-Add-back-3MP-basesize.patch \
+           file://cam/0061-mt9t112-Prepare-for-24MHz-EXTCLK-and-30-fps.patch \
+           file://cam/0062-omap3beagle-camera-Prepare-24MHz-xclk-for-mt9t112.patch \
+           file://cam/0063-mt9t112-Correct-register-settings-for-mt9t111-sensor.patch \
+           file://cam/0064-mt9t112-Remove-smart-size-selection.patch \
+           file://cam/0065-rtl8192su-remove-bogus-Kconfig-depend-on-PCI-and-add.patch \
+           file://cam/0066-mt9t112-Add-Context-selection-to-configuration.patch \
+           file://cam/0067-mt9t112-Disable-JPEG-in-Context-B.patch \
+           file://cam/0068-mt9t112-Make-context-B-stream-unlimited-frames.patch \
+           file://cam/0069-mt9t112-Fix-pll-p-dividers-abstraction.patch \
+           file://cam/0070-mt9t112-Adjust-50-60Hz-flickering-settings.patch \
+           file://cam/0071-mt9t112-Trigger-autofocus-at-the-end-of-context-swit.patch \
+           file://cam/0072-omap3beagle-camera-Fix-dual-sensor-registration.patch \
+           file://cam/0073-mt9v113-Fix-State-variable-handling.patch \
+           file://cam/0074-Move-sensor-rest-to-after-applying-power.patch \
+           file://cam/0075-omap3beagle-Add-camera-bootarg.patch \
+           file://0001-BeagleBoard-Adjust-USER-button-pin-for-xM.patch \
+           file://porches.patch \
+           file://defconfig"
+
+SRC_URI_append_beagleboard = " file://logo_linux_clut224.ppm \
+"
+
+SRC_URI_append_omap3-touchbook = " \
+                                  file://0001-ARM-OMAP-add-spi-platform-devices.patch \
+                                  file://0002-MMA7455L-accelerometer-driver.patch \
+                                  file://0003-bq27x00_battery-remove-error-message-output.patch \
+                                  file://0004-bq27x00_battery-add-charged-gpio.patch \
+                                  file://0005-adf7846-add-more-debugging.patch \
+                                  file://0006-ads7846-read-max-mix-x-y-from-pdata.patch \
+                                  file://0007-ads7846-add-settling-delay-to-pdata.patch \
+                                  file://0008-DSS2-OMAPFB-Translate-X-Y-coordinates-for-the-video-.patch \
+                                  file://0009-DSS2-Fix-scaling-checks-when-rotation-is-90-or-270-d.patch \
+                                  file://0010-add-touchbook-hid-driver.patch \
+                                  file://0011-Make-backlight-controls-accessible-to-users.patch \
+                                  file://0012-ads7846-don-t-error-out-when-there-s-no-pendown-gpio.patch \
+                                  file://0013-ASoC-add-driver-for-omap3-touchbook.patch \
+                                  file://0014-backlight-add-PWM-support.patch \
+                                  file://0015-Forward-port-TWL4030-BCI-driver-from-2.6.29-to-2.6.3.patch \
+                                  file://0016-ARM-OMAP-omap3-touchbook-update-boardfile.patch \
+#                                 file://0017-ARM-OMAP-add-800MHz-OPP-and-remove-125MHz-one.patch \
+"
+
+addtask quiltfixup before do_patch after do_unpack
+do_quiltfixup() {
+	rm ${S}/.pc -rf
+}
+
+S = "${WORKDIR}/git"
+
+do_install_append() {
+	install -d ${D}/boot
+	install -m 0644 Documentation/arm/OMAP/DSS ${D}/boot/
+}
+
+PACKAGES =+ "omap-dss-doc"
+FILES_omap-dss-doc = "/boot/DSS"
+
diff --git a/recipes-bsp/linux/linux-omap.inc b/recipes-bsp/linux/linux-omap.inc
new file mode 100644
index 0000000..c706a3f
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap.inc
@@ -0,0 +1,7 @@
+require linux.inc
+
+DESCRIPTION = "Linux kernel for OMAP processors"
+KERNEL_IMAGETYPE = "uImage"
+
+module_autoload_ohci-hcd_omap5912osk = "ohci-hcd"
+
diff --git a/recipes-bsp/linux/linux-omap3.inc b/recipes-bsp/linux/linux-omap3.inc
new file mode 100644
index 0000000..b8ff52b
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap3.inc
@@ -0,0 +1,16 @@
+SECTION = "kernel"
+DESCRIPTION = "Linux kernel for OMAP3 EVM from PSP, based on linux-omap3 kernel"
+LICENSE = "GPLv2"
+KERNEL_IMAGETYPE = "uImage"
+
+require linux.inc
+
+SRC_URI = "git://arago-project.org/git/projects/linux-omap3.git;protocol=git;branch=${BRANCH} \
+	file://defconfig"
+
+# Requires support for SOC_FAMILY matching in COMPATIBLE_MACHINE
+COMPATIBLE_MACHINE = "omap3"
+
+BRANCH ?= "master"
+
+S = "${WORKDIR}/git"
diff --git a/recipes-bsp/linux/linux-omap_2.6.37rc.bb b/recipes-bsp/linux/linux-omap_2.6.37rc.bb
new file mode 100644
index 0000000..377095b
--- /dev/null
+++ b/recipes-bsp/linux/linux-omap_2.6.37rc.bb
@@ -0,0 +1,57 @@
+require multi-kernel.inc
+
+DESCRIPTION = "Linux kernel for OMAP processors"
+KERNEL_IMAGETYPE = "uImage"
+
+COMPATIBLE_MACHINE = "(beagleboard|overo|omap3evm|omap3-touchbook|usrp-e1xx)"
+
+# The main PR is now using MACHINE_KERNEL_PR, for omap3 see conf/machine/include/omap3.inc
+PV = "2.6.36+2.6.37-rc8"
+MACHINE_KERNEL_PR_append = "a+gitr${SRCREV}"
+SRCREV = "fa3b4e23ec20cfc944db7cc2b30b0d82c20e4472"
+
+FILESPATHPKG_prepend = "linux-omap-2.6.37rc:linux-omap-2.6.37rc/${MACHINE}:"
+
+SRC_URI = "git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git;protocol=git \
+	   file://defconfig"
+
+SRC_URI_append = " \
+                  file://0001-ARM-OMAP-Power-on-EHCI-serial-camera-and-DVI-on-beag.patch \
+                  file://0002-omap-Beagle-detect-new-xM-revision-B.patch \
+                  file://0003-ARM-OMAP-beagleboard-Add-infrastructure-to-do-fixups.patch \
+                  file://0004-ARM-OMAP-beagleboard-pre-export-GPIOs-to-userspace-w.patch \
+                  file://0005-modedb.c-add-proper-720p60-mode.patch \
+                  file://0006-mmc-don-t-display-single-block-read-console-messages.patch \
+                  file://0007-MTD-silence-ecc-errors-on-mtdblock0.patch \
+                  file://0008-Miracle-patch.patch \
+                  file://0009-ARM-OMAP-add-omap_rev_-macros.patch \
+                  file://0010-OMAP-DSS2-enable-hsclk-in-dsi_pll_init-for-OMAP36XX.patch \
+                  file://0011-omap3-beagleboard-add-WIP-support-for-beagleboardtoy.patch \
+                  file://0012-drivers-net-smsc911x-return-ENODEV-if-device-is-not-.patch \
+                  file://0013-drivers-input-touchscreen-ads7846-return-ENODEV-if-d.patch \
+                  file://0014-ASoC-enable-audio-capture-by-default-for-twl4030.patch \
+                  file://0015-MFD-enable-madc-clock.patch \
+                  file://0016-MFD-add-twl4030-madc-driver.patch \
+                  file://0017-ARM-OMAP-Add-twl4030-madc-support-to-Overo.patch \
+                  file://0018-ARM-OMAP-Add-twl4030-madc-support-to-Beagle.patch \
+                  file://0019-OMAP-DSS2-Add-support-for-Samsung-LTE430WQ-F0C-panel.patch \
+                  file://0020-OMAP-DSS2-Add-support-for-LG-Philips-LB035Q02-panel.patch \
+                  file://0021-OMAP-DSS2-add-bootarg-for-selecting-svideo-or-compos.patch \
+                  file://0022-ARM-OMAP2-mmc-twl4030-move-clock-input-selection-pri.patch \
+                  file://0023-RTC-add-support-for-backup-battery-recharge.patch \
+                  file://0024-ARM-OMAP-automatically-set-musb-mode-in-platform-dat.patch \
+                  file://0025-OMAP-DSS2-check-for-both-cpu-type-and-revision-rathe.patch \
+                  file://0026-OMAP-DSS2-Add-DSS2-support-for-Overo.patch \
+"
+
+SRC_URI_append_usrp-e1xx = "\
+                  file://0027-Add-defines-to-set-config-options-in-GPMC-per-CS-con.patch \
+                  file://0028-Add-functions-to-dma.c-to-set-address-and-length-for.patch \
+                  file://0029-usrp-embedded-Add-driver-for-USRP-Embedded-FPGA-inte.patch \
+"
+
+SRC_URI_append_beagleboard = " file://logo_linux_clut224.ppm \
+"
+
+S = "${WORKDIR}/git"
+
diff --git a/recipes-bsp/linux/linux.inc b/recipes-bsp/linux/linux.inc
new file mode 100644
index 0000000..47da439
--- /dev/null
+++ b/recipes-bsp/linux/linux.inc
@@ -0,0 +1,257 @@
+DESCRIPTION = "Linux Kernel"
+SECTION = "kernel"
+LICENSE = "GPLv2"
+
+inherit kernel siteinfo
+
+RPSRC = "http://www.rpsys.net/openzaurus/patches/archive"
+
+# Enable OABI compat for people stuck with obsolete userspace
+ARM_KEEP_OABI ?= "1"
+
+# Quirk for udev greater or equal 141
+UDEV_GE_141 ?= "0"
+
+# Specify the commandline for your device
+
+# Boot from mmc
+CMDLINE_at91sam9263ek = "mem=64M console=ttyS0,115200 root=/dev/mmcblk0p1 rootfstype=ext2 rootdelay=5"
+# Boot from nfs
+#CMDLINE_at91sam9263ek = "mem=64M console=ttyS0,115200 root=301 root=/dev/nfs nfsroot=172.20.3.1:/data/at91 ip=172.20.0.5:::255.255.0.0"
+
+# Set the verbosity of kernel messages during runtime
+# You can define CMDLINE_DEBUG in your local.conf or distro.conf to override this behaviour  
+CMDLINE_DEBUG ?= '${@base_conditional("DISTRO_TYPE", "release", "quiet", "debug", d)}'
+CMDLINE_append = " ${CMDLINE_DEBUG} "
+
+# Kernel bootlogo is distro-specific (default is OE logo).
+# Logo resolution (qvga, vga, ...) is machine-specific.
+LOGO_SIZE ?= "."
+
+# Support for binary device tree generation
+
+FILES_kernel-devicetree = "/boot/devicetree*"
+
+KERNEL_DEVICETREE_boc01 = "${WORKDIR}/boc01.dts"
+KERNEL_DEVICETREE_calamari = "arch/${ARCH}/boot/dts/mpc8536ds.dts"
+KERNEL_DEVICETREE_canyonlands = "arch/${ARCH}/boot/dts/canyonlands.dts"
+KERNEL_DEVICETREE_kilauea = "arch/${ARCH}/boot/dts/kilauea.dts"
+KERNEL_DEVICETREE_lite5200 = "arch/${ARCH}/boot/dts/lite5200.dts"
+KERNEL_DEVICETREE_lsppchd = "arch/${ARCH}/boot/dts/kuroboxHD.dts"
+KERNEL_DEVICETREE_lsppchg = "arch/${ARCH}/boot/dts/kuroboxHG.dts"
+KERNEL_DEVICETREE_mpc8313e-rdb = "arch/${ARCH}/boot/dts/mpc8313erdb.dts"
+KERNEL_DEVICETREE_mpc8315e-rdb = "arch/${ARCH}/boot/dts/mpc8315erdb.dts"
+KERNEL_DEVICETREE_mpc8323e-rdb = "arch/${ARCH}/boot/dts/mpc832x_rdb.dts"
+KERNEL_DEVICETREE_mpc8544ds = "arch/${ARCH}/boot/dts/mpc8544ds.dts"
+KERNEL_DEVICETREE_mpc8641-hpcn = "arch/${ARCH}/boot/dts/mpc8641_hpcn.dts"
+KERNEL_DEVICETREE_p1020rdb = "arch/${ARCH}/boot/dts/p1020rdb.dts"
+KERNEL_DEVICETREE_p2020ds = "arch/${ARCH}/boot/dts/p2020ds.dts"
+KERNEL_DEVICETREE_sequoia = "arch/${ARCH}/boot/dts/sequoia.dts"
+KERNEL_DEVICETREE_tqm8540 = "arch/${ARCH}/boot/dts/tqm8540.dts"
+KERNEL_DEVICETREE_xilinx-ml507 = "arch/${ARCH}/boot/dts/virtex440-ml507.dts"
+
+KERNEL_DEVICETREE_FLAGS = "-R 8 -S 0x3000"
+
+CORTEXA8FIXUP ?= "yes"
+
+python __anonymous () {
+
+    import bb
+    
+    devicetree = bb.data.getVar('KERNEL_DEVICETREE', d, 1) or ''
+    if devicetree:
+    	depends = bb.data.getVar("DEPENDS", d, 1)
+    	bb.data.setVar("DEPENDS", "%s dtc-native" % depends, d)
+    	packages = bb.data.getVar("PACKAGES", d, 1)
+    	bb.data.setVar("PACKAGES", "%s kernel-devicetree" % packages, d)
+}
+
+do_configure_prepend() {
+
+        # Rename getline in ./scripts/unifdef.c
+        # Kernels up to 2.6.29 are currently failing to build unifdef.c,
+        # clashing with exposed getline() from <stdio.h>
+        # see https://patchwork.kernel.org/patch/11166/
+        # committed in 2.6.29 (commit d15bd1067b1fcb2b7250d22bc0c7c7fea0b759f7)
+
+        sed -i -e 's/getline/parseline/g' ${S}/scripts/unifdef.c
+
+
+        echo "" > ${S}/.config
+
+        #
+        # logo support, if you supply logo_linux_clut224.ppm in SRC_URI, then it's going to be used
+        #
+        if [ -e ${WORKDIR}/${LOGO_SIZE}/logo_linux_clut224.ppm ]; then
+                install -m 0644 ${WORKDIR}/${LOGO_SIZE}/logo_linux_clut224.ppm drivers/video/logo/logo_linux_clut224.ppm
+                echo "CONFIG_LOGO=y"                    >> ${S}/.config
+                echo "CONFIG_LOGO_LINUX_CLUT224=y"      >> ${S}/.config
+        fi
+
+        #
+        # oabi / eabi support
+        #
+        if [ "${TARGET_OS}" = "linux-gnueabi" -o  "${TARGET_OS}" = "linux-uclibceabi" ]; then
+                echo "CONFIG_AEABI=y"                   >> ${S}/.config
+                if [ "${ARM_KEEP_OABI}" = "1" ] ; then
+                        echo "CONFIG_OABI_COMPAT=y"             >> ${S}/.config
+                else
+                        echo "# CONFIG_OABI_COMPAT is not set"  >> ${S}/.config
+                fi
+        else
+                echo "# CONFIG_AEABI is not set"        >> ${S}/.config
+                echo "# CONFIG_OABI_COMPAT is not set"  >> ${S}/.config
+        fi
+
+        # When enabling thumb for userspace we also need thumb support in the kernel
+        if [ "${ARM_INSTRUCTION_SET}" = "thumb" ] ; then
+            sed -i -e /CONFIG_ARM_THUMB/d ${WORKDIR}/defconfig 
+            echo "CONFIG_ARM_THUMB=y" >> ${S}/.config
+        fi
+
+        # Enable thumb2 fixup for specific issue in angstrom toolchains when used on A8 r1p[012] silicon
+        if [ "${DISTRO_NAME}" = "Angstrom" -o "${CORTEXA8FIXUP}" = "yes" ] ; then
+            sed -i -e /CONFIG_ARM_ERRATA_430973/d ${WORKDIR}/defconfig
+            echo "CONFIG_ARM_ERRATA_430973=y" >> ${S}/.config
+        fi
+
+	#
+	# endian support
+	#
+        if [ "${SITEINFO_ENDIANNESS}" = "be" ]; then
+                echo "CONFIG_CPU_BIG_ENDIAN=y"          >> ${S}/.config
+        fi
+
+        echo "CONFIG_CMDLINE=\"${CMDLINE}\"" >> ${S}/.config
+
+        sed -e '/CONFIG_AEABI/d' \
+            -e '/CONFIG_OABI_COMPAT=/d' \
+            -e '/CONFIG_CMDLINE=/d' \
+            -e '/CONFIG_CPU_BIG_ENDIAN/d' \
+            -e '/CONFIG_LOGO=/d' \
+            -e '/CONFIG_LOGO_LINUX_CLUT224=/d' \
+            -e '/CONFIG_LOCALVERSION/d' \
+            -e '/CONFIG_LOCALVERSION_AUTO/d' \
+	    < '${WORKDIR}/defconfig' >>'${S}/.config'
+
+        echo 'CONFIG_LOCALVERSION=""' >>${S}/.config
+        echo '# CONFIG_LOCALVERSION_AUTO is not set' >>${S}/.config
+
+        #
+        # Udev quirks
+        #
+
+        # Newer versions of udev mandate that sysfs doesn't have deprecated entries
+        if [ "${UDEV_GE_141}" = "1" ] ; then
+            sed -e /CONFIG_SYSFS_DEPRECATED/d \
+                -e /CONFIG_SYSFS_DEPRECATED_V2/d \
+                -e /CONFIG_HOTPLUG/d \
+                -e /CONFIG_UEVENT_HELPER_PATH/d \
+                -e /CONFIG_UNIX/d \
+                -e /CONFIG_SYSFS/d \
+                -e /CONFIG_PROC_FS/d \
+                -e /CONFIG_TMPFS/d \
+                -e /CONFIG_INOTIFY_USER/d \
+                -e /CONFIG_SIGNALFD/d \
+                -e /CONFIG_TMPFS_POSIX_ACL/d \
+                -e /CONFIG_BLK_DEV_BSG/d \
+                -i '${S}/.config'
+
+            echo '# CONFIG_SYSFS_DEPRECATED is not set' >> ${S}/.config
+            echo '# CONFIG_SYSFS_DEPRECATED_V2 is not set' >> ${S}/.config
+            echo 'CONFIG_HOTPLUG=y' >> ${S}/.config
+            echo 'CONFIG_UEVENT_HELPER_PATH=""' >> ${S}/.config
+            echo 'CONFIG_UNIX=y' >> ${S}/.config
+            echo 'CONFIG_SYSFS=y' >> ${S}/.config
+            echo 'CONFIG_PROC_FS=y' >> ${S}/.config
+            echo 'CONFIG_TMPFS=y' >> ${S}/.config
+            echo 'CONFIG_INOTIFY_USER=y' >> ${S}/.config
+            echo 'CONFIG_SIGNALFD=y' >> ${S}/.config
+            echo 'CONFIG_TMPFS_POSIX_ACL=y' >> ${S}/.config
+            echo 'CONFIG_BLK_DEV_BSG=y' >> ${S}/.config
+            echo 'CONFIG_DEVTMPFS=y' >> ${S}/.config
+            echo 'CONFIG_DEVTMPFS_MOUNT=y' >> ${S}/.config
+        fi
+
+        # Newer inits like systemd need cgroup support
+        if [ "${KERNEL_ENABLE_CGROUPS}" = "1" ] ; then
+            sed -e /CONFIG_CGROUP_SCHED/d \
+                -e /CONFIG_CGROUPS/d \
+                -i '${S}/.config'
+            
+            echo 'CONFIG_CGROUP_SCHED=y' >> ${S}/.config
+            echo 'CONFIG_CGROUPS=y' >> ${S}/.config
+            echo 'CONFIG_CGROUP_NS=y' >> ${S}/.config
+            echo 'CONFIG_CGROUP_FREEZER=y' >> ${S}/.config
+            echo 'CONFIG_CGROUP_DEVICE=y' >> ${S}/.config
+            echo 'CONFIG_CPUSETS=y' >> ${S}/.config
+            echo 'CONFIG_PROC_PID_CPUSET=y' >> ${S}/.config
+            echo 'CONFIG_CGROUP_CPUACCT=y' >> ${S}/.config
+            echo 'CONFIG_RESOURCE_COUNTERS=y' >> ${S}/.config
+        fi
+
+        #
+        # root-over-nfs-over-usb-eth support. Limited, but should cover some cases.
+        # Enable this by setting a proper CMDLINE_NFSROOT_USB.
+        #
+        if [ ! -z "${CMDLINE_NFSROOT_USB}" ]; then
+                oenote "Configuring the kernel for root-over-nfs-over-usb-eth with CMDLINE ${CMDLINE_NFSROOT_USB}"
+                sed -e '/CONFIG_INET/d' \
+                    -e '/CONFIG_IP_PNP=/d' \
+                    -e '/CONFIG_USB_GADGET=/d' \
+                    -e '/CONFIG_USB_GADGET_SELECTED=/d' \
+                    -e '/CONFIG_USB_ETH=/d' \
+                    -e '/CONFIG_NFS_FS=/d' \
+                    -e '/CONFIG_ROOT_NFS=/d' \
+                    -e '/CONFIG_CMDLINE=/d' \
+                    -i ${S}/.config
+                echo "CONFIG_INET=y"                     >> ${S}/.config
+                echo "CONFIG_IP_PNP=y"                   >> ${S}/.config
+                echo "CONFIG_USB_GADGET=y"               >> ${S}/.config
+                echo "CONFIG_USB_GADGET_SELECTED=y"      >> ${S}/.config
+                echo "CONFIG_USB_ETH=y"                  >> ${S}/.config
+                echo "CONFIG_NFS_FS=y"                   >> ${S}/.config
+                echo "CONFIG_ROOT_NFS=y"                 >> ${S}/.config
+                echo "CONFIG_CMDLINE=\"${CMDLINE_NFSROOT_USB}\"" >> ${S}/.config
+        fi
+		yes '' | oe_runmake oldconfig
+}
+
+do_configure_append() {
+        if test -e scripts/Makefile.fwinst ; then
+		sed -i -e "s:-m0644:-m 0644:g" scripts/Makefile.fwinst
+	fi
+}
+
+do_install_append() {
+	oe_runmake headers_install INSTALL_HDR_PATH=${D}${exec_prefix}/src/linux-${KERNEL_VERSION} ARCH=$ARCH
+}
+
+PACKAGES =+ "kernel-headers"
+FILES_kernel-headers = "${exec_prefix}/src/linux*"
+
+do_devicetree_image() {
+    if test -n "${KERNEL_DEVICETREE}" ; then
+        dtc -I dts -O dtb ${KERNEL_DEVICETREE_FLAGS} -o devicetree ${KERNEL_DEVICETREE}
+        install -d ${D}/boot
+        install -m 0644 devicetree ${D}/boot/devicetree-${KERNEL_VERSION}
+        install -d ${DEPLOY_DIR_IMAGE}
+        install -m 0644 devicetree ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGE_BASE_NAME}.dtb
+        package_stagefile_shell ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGE_BASE_NAME}.dtb
+        cd ${DEPLOY_DIR_IMAGE}
+        rm -f ${KERNEL_IMAGE_SYMLINK_NAME}.dtb
+        ln -sf ${KERNEL_IMAGE_BASE_NAME}.dtb ${KERNEL_IMAGE_SYMLINK_NAME}.dtb
+        package_stagefile_shell ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGE_SYMLINK_NAME}.dtb
+    fi
+}
+
+addtask devicetree_image after do_install before do_package do_deploy
+
+pkg_postinst_kernel-devicetree () {
+	cd /${KERNEL_IMAGEDEST}; update-alternatives --install /${KERNEL_IMAGEDEST}/devicetree devicetree devicetree-${KERNEL_VERSION} ${KERNEL_PRIORITY} || true
+}
+
+pkg_postrm_kernel-devicetree () {
+	cd /${KERNEL_IMAGEDEST}; update-alternatives --remove devicetree devicetree-${KERNEL_VERSION} || true
+}
+
diff --git a/recipes-bsp/linux/multi-kernel.inc b/recipes-bsp/linux/multi-kernel.inc
new file mode 100644
index 0000000..be2b3b0
--- /dev/null
+++ b/recipes-bsp/linux/multi-kernel.inc
@@ -0,0 +1,97 @@
+# This .inc file allows you to build and deploy multiple sets of kernel + modules with different defconfigs
+#
+# Note that this include will NOT stage anything nor create packages, since that is virtually impossible
+# Userspace should be built against the 'regular' kernel
+#
+# The intended usecase is for machines that have mutually exclusive drivers due to e.g. pinmuxing issues.
+# For example the LogicPD omap-l138 experimenter board can have multiple mutually exclusive expansion boards
+# like lcd, ethernet, sound, 20x2 character LCD, etc. To be able to easily test all of those you can use this .inc
+#
+# To make it easier finding the original defconfig from a running kernel, this also forcefully turns on 
+# CONFIG_IKCONFIG_PROC so people can do 'zcat /proc/config.gz' on the target.
+
+require linux.inc
+
+SRC_URI_append = " \
+           file://configs/ "
+
+MULTI_CONFIG_BASE_SUFFIX = "multi-config-"
+
+# bitbake.conf only prepends PARALLEL make in tasks called do_compile, which isn't the case for multiconfig
+# So explicitly enable it for compileconfigs in here
+EXTRA_OEMAKE = "${PARALLEL_MAKE} "
+
+do_compileconfigs () {
+
+  # Compile and Install additional kernel configs if found
+  if [ -e ${WORKDIR}/configs/.empty ] ; then
+       echo "No configs found in configs/ directory, skipping to regular build"
+  else
+       echo "Multiple configs found, building those first"
+
+      # Context Save the regular 'defconfig'
+      cp ${WORKDIR}/defconfig ${WORKDIR}/defconfig.save
+
+      for config in ${WORKDIR}/configs/* ; do
+
+        # Copy in alternative config
+        cd ${S}
+        cp $config ${WORKDIR}/defconfig
+
+        # Enable config to be viewed on the target
+        echo "CONFIG_IKCONFIG=y" >> ${WORKDIR}/defconfig
+        echo "CONFIG_IKCONFIG_PROC=y" >> ${WORKDIR}/defconfig
+	
+        # Build and Install this alternative kernel
+        do_configure
+        kernel_do_compile
+        do_compile_kernelmodules
+        kernel_do_install
+
+        # Drop the resulting images in the deploy dir
+        install -d ${DEPLOY_DIR_IMAGE}
+        install -m 0644 ${KERNEL_OUTPUT} ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGE_BASE_NAME}.${MULTI_CONFIG_BASE_SUFFIX}$(basename $config).bin
+
+        if [ -d "${D}/lib" ]; then
+            fakeroot tar -cvzf ${DEPLOY_DIR_IMAGE}/${MODULES_IMAGE_BASE_NAME}.${MULTI_CONFIG_BASE_SUFFIX}$(basename $config).tgz -C ${D} lib
+        fi
+ 
+        # Install the final config alongside the images
+        cp .config ${DEPLOY_DIR_IMAGE}/config-${PV}-${PR}-${MACHINE}.${MULTI_CONFIG_BASE_SUFFIX}$(basename $config).config
+
+        # Create symlinks
+        cd ${DEPLOY_DIR_IMAGE}
+        rm -f ${KERNEL_IMAGE_SYMLINK_NAME}.${MULTI_CONFIG_BASE_SUFFIX}$(basename $config).bin
+        ln -sf ${KERNEL_IMAGE_BASE_NAME}.${MULTI_CONFIG_BASE_SUFFIX}$(basename $config).bin ${KERNEL_IMAGE_SYMLINK_NAME}.${MULTI_CONFIG_BASE_SUFFIX}$(basename $config).bin
+        rm -f modules-${MACHINE}.${MULTI_CONFIG_BASE_SUFFIX}$(basename $config).tgz
+        ln -sf ${MODULES_IMAGE_BASE_NAME}.${MULTI_CONFIG_BASE_SUFFIX}$(basename $config).tgz modules-${MACHINE}.${MULTI_CONFIG_BASE_SUFFIX}$(basename $config).tgz
+        rm -f config-${MACHINE}.${MULTI_CONFIG_BASE_SUFFIX}$(basename $config).config
+        ln -sf config-${PV}-${PR}-${MACHINE}.${MULTI_CONFIG_BASE_SUFFIX}$(basename $config).config config-${MACHINE}.${MULTI_CONFIG_BASE_SUFFIX}$(basename $config).config
+
+      done
+
+      # Restore the regular 'defconfig'
+      cp ${WORKDIR}/defconfig.save ${WORKDIR}/defconfig
+    fi
+}
+
+# For reference, copy .config to deploy image
+do_deploy_append () {
+
+    # Drop the regular defconfig along side the others for consistency
+    cd ${S}
+    cp .config ${DEPLOY_DIR_IMAGE}/config-${PV}-${PR}-${MACHINE}.config
+
+    # add symlink
+    cd ${DEPLOY_DIR_IMAGE}    
+    rm -f config-${MACHINE}.config
+    ln -s config-${PV}-${PR}-${MACHINE}.config config-${MACHINE}.config
+
+    rm -f modules-${MACHINE}.tgz
+    ln -sf ${MODULES_IMAGE_BASE_NAME}.tgz modules-${MACHINE}.tgz
+
+}
+
+do_compileconfigs[depends] += "u-boot-mkimage-native:do_populate_sysroot virtual/${TARGET_PREFIX}gcc:do_populate_sysroot virtual/${TARGET_PREFIX}gcc${KERNEL_CCSUFFIX}:do_populate_sysroot"
+addtask compileconfigs after do_patch before do_configure
+
diff --git a/recipes-bsp/u-boot/u-boot.inc b/recipes-bsp/u-boot/u-boot.inc
new file mode 100644
index 0000000..9a9528e
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot.inc
@@ -0,0 +1,67 @@
+DESCRIPTION = "U-Boot - the Universal Boot Loader"
+HOMEPAGE = "http://www.denx.de/wiki/U-Boot/WebHome"
+SECTION = "bootloaders"
+PRIORITY = "optional"
+LICENSE = "GPLv2"
+PROVIDES = "virtual/bootloader"
+
+DEPENDS = "mtd-utils"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+PARALLEL_MAKE=""
+
+EXTRA_OEMAKE = "CROSS_COMPILE=${TARGET_PREFIX}"
+
+UBOOT_MACHINE ?= "${MACHINE}_config"
+UBOOT_BINARY ?= "u-boot.bin"
+UBOOT_IMAGE ?= "u-boot-${MACHINE}-${PV}-${PR}.bin"
+UBOOT_SYMLINK ?= "u-boot-${MACHINE}.bin"
+
+do_configure () {
+	oe_runmake ${UBOOT_MACHINE}
+}
+
+do_compile () {
+	unset LDFLAGS
+	unset CFLAGS
+	unset CPPFLAGS
+	oe_runmake all
+	oe_runmake tools env
+}
+
+do_install () {
+	install -d ${D}/boot
+	install ${S}/${UBOOT_BINARY} ${D}/boot/${UBOOT_IMAGE}
+	ln -sf ${UBOOT_IMAGE} ${D}/boot/${UBOOT_BINARY}
+
+	if [ -e ${WORKDIR}/fw_env.config ] ; then
+	    install -d ${D}${base_sbindir}
+		install -d ${D}${sysconfdir}
+		install -m 644 ${WORKDIR}/fw_env.config ${D}${sysconfdir}/fw_env.config
+		install -m 755 ${S}/tools/env/fw_printenv ${D}${base_sbindir}/fw_printenv
+		install -m 755 ${S}/tools/env/fw_printenv ${D}${base_sbindir}/fw_setenv
+	fi
+
+}
+
+FILES_${PN} = "/boot"
+# no gnu_hash in uboot.bin, by design, so skip QA
+INSANE_SKIP_${PN} = True
+
+PACKAGES += "${PN}-fw-utils"
+FILES_${PN}-fw-utils = "${sysconfdir} ${base_sbindir}"
+# u-boot doesn't use LDFLAGS for fw files, needs to get fixed, but until then:
+INSANE_SKIP_${PN}-fw-utils = True
+
+do_deploy () {
+	install -d ${DEPLOY_DIR_IMAGE}
+	install ${S}/${UBOOT_BINARY} ${DEPLOY_DIR_IMAGE}/${UBOOT_IMAGE}
+	package_stagefile_shell ${DEPLOY_DIR_IMAGE}/${UBOOT_IMAGE}
+
+	cd ${DEPLOY_DIR_IMAGE}
+	rm -f ${UBOOT_SYMLINK}
+	ln -sf ${UBOOT_IMAGE} ${UBOOT_SYMLINK}
+	package_stagefile_shell ${DEPLOY_DIR_IMAGE}/${UBOOT_SYMLINK}
+}
+do_deploy[dirs] = "${S}"
+addtask deploy before do_package_stage after do_compile
diff --git a/recipes-bsp/u-boot/u-boot/0001-BeagleBoard-move-ramdisk-parameters.patch b/recipes-bsp/u-boot/u-boot/0001-BeagleBoard-move-ramdisk-parameters.patch
new file mode 100644
index 0000000..5d6e69d
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0001-BeagleBoard-move-ramdisk-parameters.patch
@@ -0,0 +1,38 @@
+From c8d02f2a8500f06de39681aed60ea5c9894f8087 Mon Sep 17 00:00:00 2001
+From: Jason Kridner <jkridner@beagleboard.org>
+Date: Wed, 11 Aug 2010 14:50:38 -0500
+Subject: [PATCH] BeagleBoard: move ramdisk parameters
+
+This will make it easier to reprogram the ramdisk size.
+
+Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
+---
+ include/configs/omap3_beagle.h |    5 ++---
+ 1 files changed, 2 insertions(+), 3 deletions(-)
+
+diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
+index 48ad805..4f5c1d4 100644
+--- a/include/configs/omap3_beagle.h
++++ b/include/configs/omap3_beagle.h
+@@ -217,7 +217,7 @@
+ 	"mmcrootfstype=ext3 rootwait\0" \
+ 	"nandroot=/dev/mtdblock4 rw\0" \
+ 	"nandrootfstype=jffs2\0" \
+-	"ramroot=/dev/ram0 rw\0" \
++	"ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \
+ 	"ramrootfstype=ext2\0" \
+ 	"mmcargs=setenv bootargs console=${console} " \
+ 		"${optargs} " \
+@@ -248,8 +248,7 @@
+ 		"vram=${vram} " \
+ 		"omapfb.mode=dvi:${dvimode} " \
+ 		"omapdss.def_disp=${defaultdisplay} " \
+-		"root=${ramroot} rw ramdisk_size=65536 " \
+-		"initrd=${rdaddr},64M " \
++		"root=${ramroot} " \
+ 		"rootfstype=${ramrootfstype}\0" \
+ 	"loadramdisk=fatload mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
+ 	"bootscript=echo Running bootscript from mmc ...; " \
+-- 
+1.5.6.4
+
diff --git a/recipes-bsp/u-boot/u-boot/0001-OMAP-mmc-add-support-for-second-and-third-mmc-chan.patch b/recipes-bsp/u-boot/u-boot/0001-OMAP-mmc-add-support-for-second-and-third-mmc-chan.patch
new file mode 100644
index 0000000..2bda1bc
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0001-OMAP-mmc-add-support-for-second-and-third-mmc-chan.patch
@@ -0,0 +1,126 @@
+From 7252b81ec10aea48672f66e33cb6962b98fb0782 Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Thu, 29 Apr 2010 10:28:14 -0700
+Subject: [PATCH] OMAP: mmc: add support for second and third mmc channels
+
+Boards wishing to use this feature should define CONFIG_SYS_MMC_SET_DEV
+
+Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
+---
+ drivers/mmc/omap3_mmc.c                   |   39 +++++++++++++++++++++++++++-
+ include/asm-arm/arch-omap3/mmc_host_def.h |   15 +++++++++--
+ 2 files changed, 49 insertions(+), 5 deletions(-)
+
+diff --git a/drivers/mmc/omap3_mmc.c b/drivers/mmc/omap3_mmc.c
+index 96c0e65..bf650ba 100644
+--- a/drivers/mmc/omap3_mmc.c
++++ b/drivers/mmc/omap3_mmc.c
+@@ -52,7 +52,27 @@ const unsigned short mmc_transspeed_val[15][4] = {
+ 
+ mmc_card_data cur_card_data;
+ static block_dev_desc_t mmc_blk_dev;
+-static hsmmc_t *mmc_base = (hsmmc_t *)OMAP_HSMMC_BASE;
++static hsmmc_t *mmc_base = (hsmmc_t *)OMAP_HSMMC1_BASE;
++
++unsigned char mmc_set_dev(int dev)
++{
++	switch (dev) {
++	case 1:
++		mmc_base = (hsmmc_t *)OMAP_HSMMC1_BASE;
++		break;
++	case 2:
++		mmc_base = (hsmmc_t *)OMAP_HSMMC2_BASE;
++		break;
++	case 3:
++		mmc_base = (hsmmc_t *)OMAP_HSMMC3_BASE;
++		break;
++	default:
++		mmc_base = (hsmmc_t *)OMAP_HSMMC1_BASE;
++		return 1;
++	}
++
++	return 0;
++}
+ 
+ block_dev_desc_t *mmc_get_dev(int dev)
+ {
+@@ -62,6 +82,7 @@ block_dev_desc_t *mmc_get_dev(int dev)
+ unsigned char mmc_board_init(void)
+ {
+ 	t2_t *t2_base = (t2_t *)T2_BASE;
++	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+ 
+ #if defined(CONFIG_TWL4030_POWER)
+ 	twl4030_power_mmc_init();
+@@ -74,6 +95,17 @@ unsigned char mmc_board_init(void)
+ 	writel(readl(&t2_base->devconf0) | MMCSDIO1ADPCLKISEL,
+ 		&t2_base->devconf0);
+ 
++	writel(readl(&t2_base->devconf1) | MMCSDIO2ADPCLKISEL,
++		&t2_base->devconf1);
++
++	writel(readl(&prcm_base->fclken1_core) | 
++		EN_MMC1 | EN_MMC2 | EN_MMC3,
++		&prcm_base->fclken1_core);
++
++	writel(readl(&prcm_base->iclken1_core) | 
++		EN_MMC1 | EN_MMC2 | EN_MMC3,
++		&prcm_base->iclken1_core);
++
+ 	return 1;
+ }
+ 
+@@ -512,8 +544,11 @@ unsigned long mmc_bread(int dev_num, unsigned long blknr, lbaint_t blkcnt,
+ 	return 1;
+ }
+ 
+-int mmc_legacy_init(int verbose)
++int mmc_legacy_init(int dev)
+ {
++	if (mmc_set_dev(dev) != 0)
++		return 1;
++
+ 	if (configure_mmc(&cur_card_data) != 1)
+ 		return 1;
+ 
+diff --git a/include/asm-arm/arch-omap3/mmc_host_def.h b/include/asm-arm/arch-omap3/mmc_host_def.h
+index aa751c9..43dd705 100644
+--- a/include/asm-arm/arch-omap3/mmc_host_def.h
++++ b/include/asm-arm/arch-omap3/mmc_host_def.h
+@@ -29,13 +29,20 @@
+ #define T2_BASE			0x48002000
+ 
+ typedef struct t2 {
+-	unsigned char res1[0x274];
++	unsigned char res1[0x274];	/* 0x000 */
+ 	unsigned int devconf0;		/* 0x274 */
+-	unsigned char res2[0x2A8];
++	unsigned char res2[0x060];	/* 0x278 */
++	unsigned int devconf1;		/* 0x2D8 */
++	unsigned char res3[0x244];	/* 0x2DC */
+ 	unsigned int pbias_lite;	/* 0x520 */
+ } t2_t;
+ 
+ #define MMCSDIO1ADPCLKISEL		(1 << 24)
++#define MMCSDIO2ADPCLKISEL		(1 << 6)
++
++#define EN_MMC1				(1 << 24)
++#define EN_MMC2				(1 << 25)
++#define EN_MMC3				(1 << 30)
+ 
+ #define PBIASLITEPWRDNZ0		(1 << 1)
+ #define PBIASSPEEDCTRL0			(1 << 2)
+@@ -44,7 +51,9 @@ typedef struct t2 {
+ /*
+  * OMAP HSMMC register definitions
+  */
+-#define OMAP_HSMMC_BASE		0x4809C000
++#define OMAP_HSMMC1_BASE	0x4809C000
++#define OMAP_HSMMC2_BASE	0x480B4000
++#define OMAP_HSMMC3_BASE	0x480AD000
+ 
+ typedef struct hsmmc {
+ 	unsigned char res1[0x10];
+-- 
+1.5.6.4
+
diff --git a/recipes-bsp/u-boot/u-boot/0001-OMAP3-Beagle-enable-support-for-second-and-third-m.patch b/recipes-bsp/u-boot/u-boot/0001-OMAP3-Beagle-enable-support-for-second-and-third-m.patch
new file mode 100644
index 0000000..21f1f13
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0001-OMAP3-Beagle-enable-support-for-second-and-third-m.patch
@@ -0,0 +1,56 @@
+From 629a01965677e680ffa1fe76579ace7f69dd45b9 Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Fri, 7 May 2010 07:40:26 -0700
+Subject: [PATCH] OMAP3: Beagle: enable support for second and third mmc channels
+
+Based on 629a01965677e680ffa1fe76579ace7f69dd45b9, but removed BOOTDELAY change.
+
+---
+ include/configs/omap3_beagle.h |   8 +++++---
+ 1 files changed, 5 insertions(+), 3 deletions(-)
+
+diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
+index f2d0f53..74d4159 100644
+--- a/include/configs/omap3_beagle.h
++++ b/include/configs/omap3_beagle.h
+@@ -95,6 +95,7 @@
+ 					115200}
+ #define CONFIG_MMC			1
+ #define CONFIG_OMAP3_MMC		1
++#define CONFIG_SYS_MMC_SET_DEV		1
+ #define CONFIG_DOS_PARTITION		1
+ 
+ /* DDR - I use Micron DDR */
+@@ -186,6 +187,7 @@
+ 	"vram=12M\0" \
+ 	"dvimode=1024x768MR-16@60\0" \
+ 	"defaultdisplay=dvi\0" \
++	"mmcdev=1\0" \
+ 	"mmcroot=/dev/mmcblk0p2 rw\0" \
+ 	"mmcrootfstype=ext3 rootwait\0" \
+ 	"nandroot=/dev/mtdblock4 rw\0" \
+@@ -204,10 +206,10 @@
+ 		"omapdss.def_disp=${defaultdisplay} " \
+ 		"root=${nandroot} " \
+ 		"rootfstype=${nandrootfstype}\0" \
+-	"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
++	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
+ 	"bootscript=echo Running bootscript from mmc ...; " \
+ 		"source ${loadaddr}\0" \
+-	"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
++	"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
+ 	"mmcboot=echo Booting from mmc ...; " \
+ 		"run mmcargs; " \
+ 		"bootm ${loadaddr}\0" \
+@@ -217,7 +219,7 @@
+ 		"bootm ${loadaddr}\0" \
+ 
+ #define CONFIG_BOOTCOMMAND \
+-	"if mmc init; then " \
++	"if mmc init ${mmcdev}; then " \
+ 		"if run loadbootscript; then " \
+ 			"run bootscript; " \
+ 		"else " \
+-- 
+1.5.6.4
+
diff --git a/recipes-bsp/u-boot/u-boot/0001-OMAP3-enable-i2c-bus-switching-for-Beagle-and-Overo.patch b/recipes-bsp/u-boot/u-boot/0001-OMAP3-enable-i2c-bus-switching-for-Beagle-and-Overo.patch
new file mode 100644
index 0000000..c718191
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0001-OMAP3-enable-i2c-bus-switching-for-Beagle-and-Overo.patch
@@ -0,0 +1,49 @@
+From 9c1581dd7f6057d5d25d6b2dcf8bacef95d526d2 Mon Sep 17 00:00:00 2001
+From: Syed Mohammed Khasim <khasim@ti.com>
+Date: Mon, 18 Jan 2010 18:11:14 +0530
+Subject: [PATCH] Enable I2C bus switching
+
+OMAP3 supports Multiple I2C channels, this patch allows
+us to use i2c dev <bus no> command to switch between busses.
+
+Signed-off-by: Syed Mohammed Khasim <khasim@ti.com>
+Acked-by: Heiko Schocher <hs@denx.de>
+(cherry picked from commit 9bb1c3501c8f098dac6e224c99e409ebf92b0ab9)
+---
+ drivers/i2c/omap24xx_i2c.c     |    5 +++++
+ include/configs/omap3_beagle.h |    6 ++++++
+ 2 files changed, 11 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c
+index f00468d..0af230d 100644
+--- a/drivers/i2c/omap24xx_i2c.c
++++ b/drivers/i2c/omap24xx_i2c.c
+@@ -435,3 +435,8 @@ int i2c_set_bus_num(unsigned int bus)
+ 
+ 	return 0;
+ }
++
++int i2c_get_bus_num(void)
++{
++	return (int) current_bus;
++}
+diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
+index ad73a66..1a76004 100644
+--- a/include/configs/omap3_beagle.h
++++ b/include/configs/omap3_beagle.h
+@@ -113,6 +113,12 @@
+ /* DDR - I use Micron DDR */
+ #define CONFIG_OMAP3_MICRON_DDR		1
+ 
++/* Enable Multi Bus support for I2C */
++#define CONFIG_I2C_MULTI_BUS		1
++
++/* Probe all devices */
++#define CONFIG_SYS_I2C_NOPROBES		{0x0, 0x0}
++
+ /* USB */
+ #define CONFIG_MUSB_UDC			1
+ #define CONFIG_USB_OMAP3		1
+-- 
+1.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0002-OMAP3-add-board-revision-detection-for-Overo.patch b/recipes-bsp/u-boot/u-boot/0002-OMAP3-add-board-revision-detection-for-Overo.patch
new file mode 100644
index 0000000..255d725
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0002-OMAP3-add-board-revision-detection-for-Overo.patch
@@ -0,0 +1,187 @@
+From 59c9245c9a52954c8c084e257bbe55443201614b Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Wed, 10 Feb 2010 14:40:56 -0800
+Subject: [PATCH 02/37] OMAP3: add board revision detection for Overo
+
+---
+ board/overo/overo.c |   90 +++++++++++++++++++++++++++++++++++++++++++++++++++
+ board/overo/overo.h |   43 +++++++++++++++++++++---
+ 2 files changed, 127 insertions(+), 6 deletions(-)
+
+diff --git a/board/overo/overo.c b/board/overo/overo.c
+index e85be7d..3df1a12 100644
+--- a/board/overo/overo.c
++++ b/board/overo/overo.c
+@@ -61,11 +61,101 @@ int board_init(void)
+ }
+ 
+ /*
++ * Routine: get_sdio2_config
++ * Description: Return information about the wifi module connection
++ *              Returns 0 if the module connects though a level translator
++ *              Returns 1 if the module connects directly
++ */
++int get_sdio2_config(void) {
++	int sdio_direct;
++
++	if (!omap_request_gpio(130) && !omap_request_gpio(139)){
++
++		omap_set_gpio_direction(130, 0);
++		omap_set_gpio_direction(139, 1);
++
++		sdio_direct = 1;
++		omap_set_gpio_dataout(130, 0);
++		if (omap_get_gpio_datain(139) == 0) {
++			omap_set_gpio_dataout(130, 1);
++			if (omap_get_gpio_datain(139) == 1)
++				sdio_direct = 0;
++		}
++
++		omap_free_gpio(130);
++		omap_free_gpio(139);
++	} else {
++		printf("Error: unable to acquire sdio2 clk GPIOs\n");
++		sdio_direct=-1;
++	}
++
++	return sdio_direct;
++}
++
++/*
++ * Routine: get_board_revision
++ * Description: Returns the board revision
++ */
++int get_board_revision(void) {
++	int revision;
++
++	if (!omap_request_gpio(126) && !omap_request_gpio(127) &&
++	    !omap_request_gpio(128) && !omap_request_gpio(129)){
++
++		omap_set_gpio_direction(126, 1);
++		omap_set_gpio_direction(127, 1);
++		omap_set_gpio_direction(128, 1);
++		omap_set_gpio_direction(129, 1);
++
++		revision = 0;
++		if (omap_get_gpio_datain(126) == 0)
++			revision += 1;
++		if (omap_get_gpio_datain(127) == 0)
++			revision += 2;
++		if (omap_get_gpio_datain(128) == 0)
++			revision += 4;
++		if (omap_get_gpio_datain(129) == 0)
++			revision += 8;
++
++		omap_free_gpio(126);
++		omap_free_gpio(127);
++		omap_free_gpio(128);
++		omap_free_gpio(129);
++	} else {
++		printf("Error: unable to acquire board revision GPIOs\n");
++		revision=-1;
++	}
++
++	return revision;
++}
++
++/*
+  * Routine: misc_init_r
+  * Description: Configure board specific parts
+  */
+ int misc_init_r(void)
+ {
++	printf("Board revision: ");
++	switch (get_board_revision()) {
++		case 0:
++		case 1:
++			switch (get_sdio2_config()) {
++				case 0:
++					printf(" 0\n");
++					MUX_OVERO_SDIO2_TRANSCEIVER();
++					break;
++				case 1:
++					printf(" 1\n");
++					MUX_OVERO_SDIO2_DIRECT();
++					break;
++				default:
++					printf(" unknown\n");
++			}
++			break;
++		default:
++			printf(" unsupported\n");
++	}
++
+ 	twl4030_power_init();
+ 	twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
+ 
+diff --git a/board/overo/overo.h b/board/overo/overo.h
+index 1873523..e120e09 100644
+--- a/board/overo/overo.h
++++ b/board/overo/overo.h
+@@ -206,12 +206,12 @@ const omap3_sysinfo sysinfo = {
+ 	MUX_VAL(CP(MMC1_DAT1),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT1*/\
+ 	MUX_VAL(CP(MMC1_DAT2),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT2*/\
+ 	MUX_VAL(CP(MMC1_DAT3),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT3*/\
+-	MUX_VAL(CP(MMC1_DAT4),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT4*/\
+-	MUX_VAL(CP(MMC1_DAT5),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT5*/\
+-	MUX_VAL(CP(MMC1_DAT6),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT6*/\
+-	MUX_VAL(CP(MMC1_DAT7),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT7*/\
++	MUX_VAL(CP(MMC1_DAT4),		(IEN  | PTU | EN  | M4)) /*GPIO_126*/\
++	MUX_VAL(CP(MMC1_DAT5),		(IEN  | PTU | EN  | M4)) /*GPIO_127*/\
++	MUX_VAL(CP(MMC1_DAT6),		(IEN  | PTU | EN  | M4)) /*GPIO_128*/\
++	MUX_VAL(CP(MMC1_DAT7),		(IEN  | PTU | EN  | M4)) /*GPIO_129*/\
+  /*Wireless LAN */\
+-	MUX_VAL(CP(MMC2_CLK),		(IEN  | PTU | EN  | M0)) /*MMC2_CLK*/\
++	MUX_VAL(CP(MMC2_CLK),		(IEN  | PTU | EN  | M4)) /*GPIO_130*/\
+ 	MUX_VAL(CP(MMC2_CMD),		(IEN  | PTU | EN  | M0)) /*MMC2_CMD*/\
+ 	MUX_VAL(CP(MMC2_DAT0),		(IEN  | PTU | EN  | M0)) /*MMC2_DAT0*/\
+ 	MUX_VAL(CP(MMC2_DAT1),		(IEN  | PTU | EN  | M0)) /*MMC2_DAT1*/\
+@@ -220,7 +220,7 @@ const omap3_sysinfo sysinfo = {
+ 	MUX_VAL(CP(MMC2_DAT4),		(IEN  | PTU | EN  | M1)) /*MMC2_DIR_DAT0*/\
+ 	MUX_VAL(CP(MMC2_DAT5),		(IEN  | PTU | EN  | M1)) /*MMC2_DIR_DAT1*/\
+ 	MUX_VAL(CP(MMC2_DAT6),		(IEN  | PTU | EN  | M1)) /*MMC2_DIR_CMD*/\
+-	MUX_VAL(CP(MMC2_DAT7),		(IEN  | PTU | EN  | M1)) /*MMC2_CLKIN*/\
++	MUX_VAL(CP(MMC2_DAT7),		(IEN  | PTU | EN  | M4)) /*GPIO_139*/\
+  /*Bluetooth*/\
+ 	MUX_VAL(CP(MCBSP3_DX),		(IEN  | PTD | DIS | M1)) /*UART2_CTS*/\
+ 	MUX_VAL(CP(MCBSP3_DR),		(IDIS | PTD | DIS | M1)) /*UART2_RTS*/\
+@@ -387,5 +387,36 @@ const omap3_sysinfo sysinfo = {
+ 	MUX_VAL(CP(SDRC_CKE0),		(IDIS | PTU | EN  | M0)) /*sdrc_cke0*/\
+ 	MUX_VAL(CP(SDRC_CKE1),		(IDIS | PTU | EN  | M0)) /*sdrc_cke1*/
+ 
++#define MUX_OVERO_SDIO2_DIRECT() \
++	MUX_VAL(CP(MMC2_CLK),		(IEN  | PTU | EN  | M0)) /*MMC2_CLK*/\
++	MUX_VAL(CP(MMC2_CMD),		(IEN  | PTU | EN  | M0)) /*MMC2_CMD*/\
++	MUX_VAL(CP(MMC2_DAT0),		(IEN  | PTU | EN  | M0)) /*MMC2_DAT0*/\
++	MUX_VAL(CP(MMC2_DAT1),		(IEN  | PTU | EN  | M0)) /*MMC2_DAT1*/\
++	MUX_VAL(CP(MMC2_DAT2),		(IEN  | PTU | EN  | M0)) /*MMC2_DAT2*/\
++	MUX_VAL(CP(MMC2_DAT3),		(IEN  | PTU | EN  | M0)) /*MMC2_DAT3*/\
++	MUX_VAL(CP(MMC2_DAT4),		(IEN  | PTU | EN  | M0)) /*MMC2_DAT4*/\
++	MUX_VAL(CP(MMC2_DAT5),		(IEN  | PTU | EN  | M0)) /*MMC2_DAT5*/\
++	MUX_VAL(CP(MMC2_DAT6),		(IEN  | PTU | EN  | M0)) /*MMC2_DAT6*/\
++	MUX_VAL(CP(MMC2_DAT7),		(IEN  | PTU | EN  | M0)) /*MMC2_DAT7*/\
++	MUX_VAL(CP(MMC1_DAT4),		(IEN  | PTD | EN  | M4)) /*GPIO_126*/\
++	MUX_VAL(CP(MMC1_DAT5),		(IEN  | PTU | EN  | M4)) /*GPIO_127*/\
++	MUX_VAL(CP(MMC1_DAT6),		(IEN  | PTU | EN  | M4)) /*GPIO_128*/\
++	MUX_VAL(CP(MMC1_DAT7),		(IEN  | PTU | EN  | M4)) /*GPIO_129*/
++
++#define MUX_OVERO_SDIO2_TRANSCEIVER() \
++	MUX_VAL(CP(MMC2_CLK),		(IEN  | PTU | EN  | M0)) /*MMC2_CLK*/\
++	MUX_VAL(CP(MMC2_CMD),		(IEN  | PTU | EN  | M0)) /*MMC2_CMD*/\
++	MUX_VAL(CP(MMC2_DAT0),		(IEN  | PTU | EN  | M0)) /*MMC2_DAT0*/\
++	MUX_VAL(CP(MMC2_DAT1),		(IEN  | PTU | EN  | M0)) /*MMC2_DAT1*/\
++	MUX_VAL(CP(MMC2_DAT2),		(IEN  | PTU | EN  | M0)) /*MMC2_DAT2*/\
++	MUX_VAL(CP(MMC2_DAT3),		(IEN  | PTU | EN  | M0)) /*MMC2_DAT3*/\
++	MUX_VAL(CP(MMC2_DAT4),		(IEN  | PTU | EN  | M1)) /*MMC2_DIR_DAT0*/\
++	MUX_VAL(CP(MMC2_DAT5),		(IEN  | PTU | EN  | M1)) /*MMC2_DIR_DAT1*/\
++	MUX_VAL(CP(MMC2_DAT6),		(IEN  | PTU | EN  | M1)) /*MMC2_DIR_CMD*/\
++	MUX_VAL(CP(MMC2_DAT7),		(IEN  | PTU | EN  | M1)) /*MMC2_CLKIN*/\
++	MUX_VAL(CP(MMC1_DAT4),		(IEN  | PTU | EN  | M4)) /*GPIO_126*/\
++	MUX_VAL(CP(MMC1_DAT5),		(IEN  | PTU | EN  | M4)) /*GPIO_127*/\
++	MUX_VAL(CP(MMC1_DAT6),		(IEN  | PTU | EN  | M4)) /*GPIO_128*/\
++	MUX_VAL(CP(MMC1_DAT7),		(IEN  | PTU | EN  | M4)) /*GPIO_129*/
+ 
+ #endif
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0003-OMAP3-update-Beagle-revision-detection-to-recognize-.patch b/recipes-bsp/u-boot/u-boot/0003-OMAP3-update-Beagle-revision-detection-to-recognize-.patch
new file mode 100644
index 0000000..d12ff7a
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0003-OMAP3-update-Beagle-revision-detection-to-recognize-.patch
@@ -0,0 +1,165 @@
+From 9db5da6e8a0d6fb973b71902525ad3298faa39d9 Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Wed, 10 Feb 2010 14:51:48 -0800
+Subject: [PATCH 03/37] OMAP3: update Beagle revision detection to recognize C4 boards
+
+---
+ board/ti/beagle/beagle.c |   77 +++++++++++++++++++++++++++-------------------
+ board/ti/beagle/beagle.h |    7 +++-
+ 2 files changed, 51 insertions(+), 33 deletions(-)
+
+diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
+index 3b4c9e7..ba16dd7 100644
+--- a/board/ti/beagle/beagle.c
++++ b/board/ti/beagle/beagle.c
+@@ -38,7 +38,7 @@
+ #include <asm/mach-types.h>
+ #include "beagle.h"
+ 
+-static int beagle_revision_c;
++static int beagle_revision;
+ 
+ /*
+  * Routine: board_init
+@@ -60,41 +60,38 @@ int board_init(void)
+ /*
+  * Routine: beagle_get_revision
+  * Description: Return the revision of the BeagleBoard this code is running on.
+- *              If it is a revision Ax/Bx board, this function returns 0,
+- *              on a revision C board you will get a 1.
+  */
+ int beagle_get_revision(void)
+ {
+-	return beagle_revision_c;
++	return beagle_revision;
+ }
+ 
+ /*
+  * Routine: beagle_identify
+- * Description: Detect if we are running on a Beagle revision Ax/Bx or
+- *              Cx. This can be done by GPIO_171. If this is low, we are
+- *              running on a revision C board.
++ * Description: Detect if we are running on a Beagle revision Ax/Bx,
++ *		C1/2/3, C4 or D. This can be done by reading
++ *		the level of GPIO173, GPIO172 and GPIO171. This should
++ *		result in
++ *		GPIO173, GPIO172, GPIO171: 1 1 1 => Ax/Bx
++ *		GPIO173, GPIO172, GPIO171: 1 1 0 => C1/2/3
++ *		GPIO173, GPIO172, GPIO171: 1 0 1 => C4
++ *		GPIO173, GPIO172, GPIO171: 0 0 0 => D
+  */
+ void beagle_identify(void)
+ {
+-	beagle_revision_c = 0;
+-	if (!omap_request_gpio(171)) {
+-		unsigned int val;
+-
+-		omap_set_gpio_direction(171, 1);
+-		val = omap_get_gpio_datain(171);
+-		omap_free_gpio(171);
+-
+-		if (val)
+-			beagle_revision_c = 0;
+-		else
+-			beagle_revision_c = 1;
+-	}
+-
+-	printf("Board revision ");
+-	if (beagle_revision_c)
+-		printf("C\n");
+-	else
+-		printf("Ax/Bx\n");
++	omap_request_gpio(171);
++	omap_request_gpio(172);
++	omap_request_gpio(173);
++	omap_set_gpio_direction(171, 1);
++	omap_set_gpio_direction(172, 1);
++	omap_set_gpio_direction(173, 1);
++
++	beagle_revision = omap_get_gpio_datain(173) << 2 |
++			  omap_get_gpio_datain(172) << 1 |
++			  omap_get_gpio_datain(171);
++	omap_free_gpio(171);
++	omap_free_gpio(172);
++	omap_free_gpio(173);
+ }
+ 
+ /*
+@@ -106,9 +103,31 @@ int misc_init_r(void)
+ 	struct gpio *gpio5_base = (struct gpio *)OMAP34XX_GPIO5_BASE;
+ 	struct gpio *gpio6_base = (struct gpio *)OMAP34XX_GPIO6_BASE;
+ 
++	beagle_identify();
++
+ 	twl4030_power_init();
+ 	twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
+ 
++	printf("Board revision ");
++	switch (beagle_revision) {
++	case REVISION_AXBX:
++		printf("Ax/Bx\n");
++		break;
++	case REVISION_CX:
++		printf("C1/C2/C3\n");
++		MUX_BEAGLE_C();
++		break;
++	case REVISION_C4:
++		printf("C4\n");
++		MUX_BEAGLE_C();
++		break;
++	case REVISION_D:
++		printf("D\n");
++		break;
++	default:
++		printf("unknown 0x%02x\n", beagle_revision);
++	}
++
+ 	/* Configure GPIOs to output */
+ 	writel(~(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1), &gpio6_base->oe);
+ 	writel(~(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 |
+@@ -120,8 +139,6 @@ int misc_init_r(void)
+ 	writel(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 |
+ 		GPIO15 | GPIO14 | GPIO13 | GPIO12, &gpio5_base->setdataout);
+ 
+-	beagle_identify();
+-
+ 	dieid_num_r();
+ 
+ 	return 0;
+@@ -136,8 +153,4 @@ int misc_init_r(void)
+ void set_muxconf_regs(void)
+ {
+ 	MUX_BEAGLE();
+-
+-	if (beagle_revision_c) {
+-		MUX_BEAGLE_C();
+-	}
+ }
+diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h
+index 7fe6275..d95fd78 100644
+--- a/board/ti/beagle/beagle.h
++++ b/board/ti/beagle/beagle.h
+@@ -34,6 +34,11 @@ const omap3_sysinfo sysinfo = {
+ };
+ 
+ #define BOARD_REVISION_MASK	(0x1 << 11)
++/* BeagleBoard revisions */
++#define REVISION_AXBX	0x7
++#define REVISION_CX	0x6
++#define REVISION_C4	0x5
++#define REVISION_D	0x0
+ 
+ /*
+  * IEN  - Input Enable
+@@ -264,7 +269,7 @@ const omap3_sysinfo sysinfo = {
+ 	MUX_VAL(CP(HDQ_SIO),		(IDIS | PTU | EN  | M4)) /*GPIO_170*/\
+ 	MUX_VAL(CP(MCSPI1_CLK),		(IEN  | PTU | EN  | M4)) /*GPIO_171*/\
+ 	MUX_VAL(CP(MCSPI1_SIMO),	(IEN  | PTU | EN  | M4)) /*GPIO_172*/\
+-	MUX_VAL(CP(MCSPI1_SOMI),	(IEN  | PTD | DIS | M0)) /*McSPI1_SOMI*/\
++	MUX_VAL(CP(MCSPI1_SOMI),	(IEN  | PTU | EN  | M4)) /*GPIO_173*/\
+ 	MUX_VAL(CP(MCSPI1_CS0),		(IEN  | PTD | EN  | M0)) /*McSPI1_CS0*/\
+ 	MUX_VAL(CP(MCSPI1_CS1),		(IDIS | PTD | EN  | M0)) /*McSPI1_CS1*/\
+ 	MUX_VAL(CP(MCSPI1_CS2),		(IDIS | PTD | DIS | M4)) /*GPIO_176*/\
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0004-OMAP3-Set-VAUX2-to-1.8V-for-EHCI-PHY-on-Beagle-Rev-C.patch b/recipes-bsp/u-boot/u-boot/0004-OMAP3-Set-VAUX2-to-1.8V-for-EHCI-PHY-on-Beagle-Rev-C.patch
new file mode 100644
index 0000000..549b3fb
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0004-OMAP3-Set-VAUX2-to-1.8V-for-EHCI-PHY-on-Beagle-Rev-C.patch
@@ -0,0 +1,143 @@
+From efc587fb24a5246f5a436a057320687a1b7847c6 Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Wed, 10 Feb 2010 15:23:19 -0800
+Subject: [PATCH 04/37] OMAP3: Set VAUX2 to 1.8V for EHCI PHY on Beagle Rev C4 boards
+
+---
+ board/ti/beagle/beagle.c |    5 +++++
+ drivers/power/twl4030.c  |   45 +++++++++++++++++++++++++--------------------
+ include/twl4030.h        |   15 +++++++++++++++
+ 3 files changed, 45 insertions(+), 20 deletions(-)
+
+diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
+index ba16dd7..b4ea7e6 100644
+--- a/board/ti/beagle/beagle.c
++++ b/board/ti/beagle/beagle.c
+@@ -120,6 +120,11 @@ int misc_init_r(void)
+ 	case REVISION_C4:
+ 		printf("C4\n");
+ 		MUX_BEAGLE_C();
++		/* Set VAUX2 to 1.8V for EHCI PHY */
++		twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
++					TWL4030_PM_RECEIVER_VAUX2_VSEL_18,
++					TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
++					TWL4030_PM_RECEIVER_DEV_GRP_P1);
+ 		break;
+ 	case REVISION_D:
+ 		printf("D\n");
+diff --git a/drivers/power/twl4030.c b/drivers/power/twl4030.c
+index eb066cb..f354834 100644
+--- a/drivers/power/twl4030.c
++++ b/drivers/power/twl4030.c
+@@ -59,57 +59,62 @@ void twl4030_power_reset_init(void)
+ 	}
+ }
+ 
+-
+-/*
+- * Power Init
+- */
+-#define DEV_GRP_P1		0x20
+-#define VAUX3_VSEL_28		0x03
+-#define DEV_GRP_ALL		0xE0
+-#define VPLL2_VSEL_18		0x05
+-#define VDAC_VSEL_18		0x03
+-
+ void twl4030_power_init(void)
+ {
+ 	unsigned char byte;
+ 
+ 	/* set VAUX3 to 2.8V */
+-	byte = DEV_GRP_P1;
++	byte = TWL4030_PM_RECEIVER_DEV_GRP_P1;
+ 	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
+ 			     TWL4030_PM_RECEIVER_VAUX3_DEV_GRP);
+-	byte = VAUX3_VSEL_28;
++	byte = TWL4030_PM_RECEIVER_VAUX3_VSEL_28;
+ 	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
+ 			     TWL4030_PM_RECEIVER_VAUX3_DEDICATED);
+ 
+ 	/* set VPLL2 to 1.8V */
+-	byte = DEV_GRP_ALL;
++	byte = TWL4030_PM_RECEIVER_DEV_GRP_ALL;
+ 	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
+ 			     TWL4030_PM_RECEIVER_VPLL2_DEV_GRP);
+-	byte = VPLL2_VSEL_18;
++	byte = TWL4030_PM_RECEIVER_VPLL2_VSEL_18;
+ 	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
+ 			     TWL4030_PM_RECEIVER_VPLL2_DEDICATED);
+ 
+ 	/* set VDAC to 1.8V */
+-	byte = DEV_GRP_P1;
++	byte = TWL4030_PM_RECEIVER_DEV_GRP_P1;
+ 	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
+ 			     TWL4030_PM_RECEIVER_VDAC_DEV_GRP);
+-	byte = VDAC_VSEL_18;
++	byte = TWL4030_PM_RECEIVER_VDAC_VSEL_18;
+ 	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
+ 			     TWL4030_PM_RECEIVER_VDAC_DEDICATED);
+ }
+ 
+-#define VMMC1_VSEL_30		0x02
+-
+ void twl4030_power_mmc_init(void)
+ {
+ 	unsigned char byte;
+ 
+-	byte = DEV_GRP_P1;
++	byte = TWL4030_PM_RECEIVER_DEV_GRP_P1;
+ 	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
+ 			     TWL4030_PM_RECEIVER_VMMC1_DEV_GRP);
+ 
+ 	/* 3 Volts */
+-	byte = VMMC1_VSEL_30;
++	byte = TWL4030_PM_RECEIVER_VMMC1_VSEL_30;
+ 	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
+ 			     TWL4030_PM_RECEIVER_VMMC1_DEDICATED);
+ }
++
++/*
++ * Generic function to select Device Group and Voltage
++ */
++void twl4030_pmrecv_vsel_cfg(u8 vsel_reg, u8 vsel_val,
++				u8 dev_grp, u8 dev_grp_sel)
++{
++	/* Select the Device Group */
++	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, dev_grp_sel,
++				dev_grp);
++
++	/* Select the Voltage */
++	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, vsel_val,
++				vsel_reg);
++}
++
++
+diff --git a/include/twl4030.h b/include/twl4030.h
+index 2b2f5ae..cc99403 100644
+--- a/include/twl4030.h
++++ b/include/twl4030.h
+@@ -471,6 +471,21 @@
+ #define TWL4030_USB_PHY_CLK_CTRL_STS			0xFF
+ 
+ /*
++ * Voltage Selection in PM Receiver Module
++ */
++#define TWL4030_PM_RECEIVER_VAUX2_VSEL_18		0x05
++#define TWL4030_PM_RECEIVER_VAUX3_VSEL_28		0x03
++#define TWL4030_PM_RECEIVER_VPLL2_VSEL_18		0x05
++#define TWL4030_PM_RECEIVER_VDAC_VSEL_18		0x03
++#define TWL4030_PM_RECEIVER_VMMC1_VSEL_30		0x02
++
++/*
++ * Device Selection in PM Receiver Module
++ */
++#define TWL4030_PM_RECEIVER_DEV_GRP_P1			0x20
++#define TWL4030_PM_RECEIVER_DEV_GRP_ALL			0xE0
++
++/*
+  * Convience functions to read and write from TWL4030
+  *
+  * chip_no is the i2c address, it must be one of the chip addresses
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0005-OMAP3-add-entry-for-rev-3.1.2-check-and-display-max-.patch b/recipes-bsp/u-boot/u-boot/0005-OMAP3-add-entry-for-rev-3.1.2-check-and-display-max-.patch
new file mode 100644
index 0000000..783fe27
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0005-OMAP3-add-entry-for-rev-3.1.2-check-and-display-max-.patch
@@ -0,0 +1,105 @@
+From 27072274450ea8de1994744782397452b99814cc Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Wed, 3 Feb 2010 12:26:30 -0800
+Subject: [PATCH 05/37] OMAP3: add entry for rev 3.1.2, check and display max cpu clock for rev > 3.0
+
+---
+ cpu/arm_cortexa8/omap3/sys_info.c  |   24 ++++++++++++++++++++++--
+ include/asm-arm/arch-omap3/cpu.h   |    8 +++++++-
+ include/asm-arm/arch-omap3/omap3.h |    3 ++-
+ 3 files changed, 31 insertions(+), 4 deletions(-)
+
+diff --git a/cpu/arm_cortexa8/omap3/sys_info.c b/cpu/arm_cortexa8/omap3/sys_info.c
+index 08fb32e..e227f67 100644
+--- a/cpu/arm_cortexa8/omap3/sys_info.c
++++ b/cpu/arm_cortexa8/omap3/sys_info.c
+@@ -39,7 +39,10 @@ static char *rev_s[CPU_3XX_MAX_REV] = {
+ 				"2.0",
+ 				"2.1",
+ 				"3.0",
+-				"3.1"};
++				"3.1",
++				"UNKNOWN",
++				"UNKNOWN",
++				"3.1.2"};
+ 
+ /*****************************************************************
+  * dieid_num_r(void) - read and set die ID
+@@ -104,6 +107,16 @@ u32 get_cpu_rev(void)
+ 	}
+ }
+ 
++/*****************************************************************
++ * get_sku_id(void) - read sku_id to get info on max clock rate
++ *****************************************************************/
++u32 get_sku_id(void)
++{
++	struct ctrl_id *id_base = (struct ctrl_id *)OMAP34XX_ID_L4_IO_BASE;
++	return (readl(&id_base->sku_id) & SKUID_CLK_MASK);
++}
++
++
+ /****************************************************
+  * is_mem_sdr() - return 1 if mem type in use is SDR
+  ****************************************************/
+@@ -291,9 +304,16 @@ int print_cpuinfo (void)
+ 		sec_s = "?";
+ 	}
+ 
+-	printf("OMAP%s-%s ES%s, CPU-OPP2 L3-165MHz\n",
++	printf("OMAP%s-%s ES%s, CPU-OPP2, L3-165MHz, ",
+ 			cpu_s, sec_s, rev_s[get_cpu_rev()]);
+ 
++	printf("Max clock-");
++	if ((get_cpu_rev() >= CPU_3XX_ES31) && (get_sku_id() == SKUID_CLK_720MHZ))
++		printf("720Mhz\n");
++	else	printf("600Mhz\n");
++	
++
++
+ 	return 0;
+ }
+ #endif	/* CONFIG_DISPLAY_CPUINFO */
+diff --git a/include/asm-arm/arch-omap3/cpu.h b/include/asm-arm/arch-omap3/cpu.h
+index aa8de32..f769571 100644
+--- a/include/asm-arm/arch-omap3/cpu.h
++++ b/include/asm-arm/arch-omap3/cpu.h
+@@ -72,7 +72,8 @@ struct ctrl_id {
+ 	u8 res1[0x4];
+ 	u32 idcode;		/* 0x04 */
+ 	u32 prod_id;		/* 0x08 */
+-	u8 res2[0x0C];
++	u32 sku_id;		/* 0x0c */
++	u8 res2[0x08];
+ 	u32 die_id_0;		/* 0x18 */
+ 	u32 die_id_1;		/* 0x1C */
+ 	u32 die_id_2;		/* 0x20 */
+@@ -89,6 +90,11 @@ struct ctrl_id {
+ #define HS_DEVICE		0x2
+ #define GP_DEVICE		0x3
+ 
++/* device speed */
++#define SKUID_CLK_MASK		0xf
++#define SKUID_CLK_600MHZ	0x0
++#define SKUID_CLK_720MHZ	0x8
++
+ #define GPMC_BASE		(OMAP34XX_GPMC_BASE)
+ #define GPMC_CONFIG_CS0		0x60
+ #define GPMC_CONFIG_CS0_BASE	(GPMC_BASE + GPMC_CONFIG_CS0)
+diff --git a/include/asm-arm/arch-omap3/omap3.h b/include/asm-arm/arch-omap3/omap3.h
+index 12815f6..1349b8b 100644
+--- a/include/asm-arm/arch-omap3/omap3.h
++++ b/include/asm-arm/arch-omap3/omap3.h
+@@ -176,7 +176,8 @@ struct gpio {
+ #define CPU_3XX_ES21		2
+ #define CPU_3XX_ES30		3
+ #define CPU_3XX_ES31		4
+-#define CPU_3XX_MAX_REV		(CPU_3XX_ES31 + 1)
++#define CPU_3XX_ES312		7
++#define CPU_3XX_MAX_REV		8
+ 
+ #define CPU_3XX_ID_SHIFT	28
+ 
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0006-OMAP3-add-mpurate-boot-arg-for-overo-and-beagle.patch b/recipes-bsp/u-boot/u-boot/0006-OMAP3-add-mpurate-boot-arg-for-overo-and-beagle.patch
new file mode 100644
index 0000000..de3b484
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0006-OMAP3-add-mpurate-boot-arg-for-overo-and-beagle.patch
@@ -0,0 +1,70 @@
+From 1b082bb4a8ba5b7bee727baf3cd048e1785c8abd Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Wed, 3 Feb 2010 14:39:14 -0800
+Subject: [PATCH 06/37] OMAP3: add mpurate boot arg for overo and beagle
+
+allows one to set the omap clock rate via "setenv mpurate 720" for example
+---
+ include/configs/omap3_beagle.h |    3 +++
+ include/configs/omap3_overo.h  |    3 +++
+ 2 files changed, 6 insertions(+), 0 deletions(-)
+
+diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
+index 87e3dd0..ce347cd 100644
+--- a/include/configs/omap3_beagle.h
++++ b/include/configs/omap3_beagle.h
+@@ -182,6 +182,7 @@
+ 	"loadaddr=0x82000000\0" \
+ 	"usbtty=cdc_acm\0" \
+ 	"console=ttyS2,115200n8\0" \
++	"mpurate=500\0" \
+ 	"vram=12M\0" \
+ 	"dvimode=1024x768MR-16@60\0" \
+ 	"defaultdisplay=dvi\0" \
+@@ -190,6 +191,7 @@
+ 	"nandroot=/dev/mtdblock4 rw\0" \
+ 	"nandrootfstype=jffs2\0" \
+ 	"mmcargs=setenv bootargs console=${console} " \
++		"mpurate=${mpurate} " \
+ 		"vram=${vram} " \
+ 		"omapfb.mode=dvi:${dvimode} " \
+ 		"omapfb.debug=y " \
+@@ -197,6 +199,7 @@
+ 		"root=${mmcroot} " \
+ 		"rootfstype=${mmcrootfstype}\0" \
+ 	"nandargs=setenv bootargs console=${console} " \
++		"mpurate=${mpurate} " \
+ 		"vram=${vram} " \
+ 		"omapfb.mode=dvi:${dvimode} " \
+ 		"omapfb.debug=y " \
+diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
+index 0d24758..295cce6 100644
+--- a/include/configs/omap3_overo.h
++++ b/include/configs/omap3_overo.h
+@@ -152,6 +152,7 @@
+ #define CONFIG_EXTRA_ENV_SETTINGS \
+ 	"loadaddr=0x82000000\0" \
+ 	"console=ttyS2,115200n8\0" \
++	"mpurate=500\0" \
+ 	"vram=12M\0" \
+ 	"dvimode=1024x768MR-16@60\0" \
+ 	"defaultdisplay=dvi\0" \
+@@ -160,6 +161,7 @@
+ 	"nandroot=/dev/mtdblock4 rw\0" \
+ 	"nandrootfstype=jffs2\0" \
+ 	"mmcargs=setenv bootargs console=${console} " \
++		"mpurate=${mpurate} " \
+ 		"vram=${vram} " \
+ 		"omapfb.mode=dvi:${dvimode} " \
+ 		"omapfb.debug=y " \
+@@ -167,6 +169,7 @@
+ 		"root=${mmcroot} " \
+ 		"rootfstype=${mmcrootfstype}\0" \
+ 	"nandargs=setenv bootargs console=${console} " \
++		"mpurate=${mpurate} " \
+ 		"vram=${vram} " \
+ 		"omapfb.mode=dvi:${dvimode} " \
+ 		"omapfb.debug=y " \
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0007-OMAP3-detect-expansion-board-type-version-using-eepr.patch b/recipes-bsp/u-boot/u-boot/0007-OMAP3-detect-expansion-board-type-version-using-eepr.patch
new file mode 100644
index 0000000..13da414
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0007-OMAP3-detect-expansion-board-type-version-using-eepr.patch
@@ -0,0 +1,129 @@
+From 129dccd106ea5862f3ff25c368102bf656472f7f Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Fri, 12 Feb 2010 12:17:48 -0800
+Subject: [PATCH 07/37] OMAP3: detect expansion board type/version using eeprom contents
+
+---
+ board/overo/overo.c |   92 +++++++++++++++++++++++++++++++++++++++++++++++++++
+ 1 files changed, 92 insertions(+), 0 deletions(-)
+
+diff --git a/board/overo/overo.c b/board/overo/overo.c
+index 3df1a12..2838a1f 100644
+--- a/board/overo/overo.c
++++ b/board/overo/overo.c
+@@ -39,6 +39,31 @@
+ #include <asm/mach-types.h>
+ #include "overo.h"
+ 
++static struct {
++	unsigned int device_vendor;
++	unsigned char revision;
++	unsigned char content;
++	unsigned char data[6];
++} expansion_config;
++
++#define TWL4030_I2C_BUS			0
++
++#define EXPANSION_EEPROM_I2C_BUS	2
++#define EXPANSION_EEPROM_I2C_ADDRESS	0x50
++
++#define GUMSTIX_VENDORID		0x0200
++
++#define GUMSTIX_SUMMIT			0x01000200
++#define GUMSTIX_TOBI			0x02000200
++#define GUMSTIX_TOBI_DUO		0x03000200
++#define GUMSTIX_PALO35			0x04000200
++#define GUMSTIX_PALO43			0x05000200
++#define GUMSTIX_CHESTNUT43		0x06000200
++#define GUMSTIX_PINTO			0x07000200
++
++#define GUMSTIX_NO_EEPROM		0xfffffffe
++#define GUMSTIX_UNKNOWN			0xffffffff
++
+ #if defined(CONFIG_CMD_NET)
+ static void setup_net_chip(void);
+ #endif
+@@ -130,6 +155,31 @@ int get_board_revision(void) {
+ }
+ 
+ /*
++ * Routine: get_expansion_id
++ * Description: This function checks for expansion board by checking I2C
++ *		bus 2 for the availability of an AT24C01B serial EEPROM.
++ *		returns the device_vendor field from the EEPROM
++ */
++unsigned int get_expansion_id(void)
++{
++	i2c_set_bus_num(EXPANSION_EEPROM_I2C_BUS);
++
++	/* return GUMSTIX_NO_EEPROM if eeprom doesn't respond */
++	if (i2c_probe(EXPANSION_EEPROM_I2C_ADDRESS) == 1)
++		return GUMSTIX_NO_EEPROM;
++
++	/* read configuration data */
++	i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 1, (u8 *)&expansion_config,
++		 sizeof(expansion_config));
++
++	if ( (expansion_config.device_vendor & 0xffff) != GUMSTIX_VENDORID )
++		return GUMSTIX_UNKNOWN;
++	else
++		return expansion_config.device_vendor;
++}
++
++
++/*
+  * Routine: misc_init_r
+  * Description: Configure board specific parts
+  */
+@@ -156,6 +206,48 @@ int misc_init_r(void)
+ 			printf(" unsupported\n");
+ 	}
+ 
++	switch (get_expansion_id()) {
++		case GUMSTIX_SUMMIT:
++			printf("Recognized Summit expansion board (rev %d %s)\n",
++				expansion_config.revision, expansion_config.data);
++			setenv("defaultdisplay", "dvi");
++			break;
++		case GUMSTIX_TOBI:
++			printf("Recognized Tobi expansion board (rev %d %s)\n",
++				expansion_config.revision, expansion_config.data);
++			setenv("defaultdisplay", "dvi");
++			break;
++		case GUMSTIX_TOBI_DUO:
++			printf("Recognized Tobi Duo expansion board (rev %d %s)\n",
++				expansion_config.revision, expansion_config.data);
++			break;
++		case GUMSTIX_PALO35:
++			printf("Recognized Palo 35 expansion board (rev %d %s)\n",
++				expansion_config.revision, expansion_config.data);
++			setenv("defaultdisplay", "lcd35");
++			break;
++		case GUMSTIX_PALO43:
++			printf("Recognized Palo 43 expansion board (rev %d %s)\n",
++				expansion_config.revision, expansion_config.data);
++			setenv("defaultdisplay", "lcd43");
++			break;
++		case GUMSTIX_CHESTNUT43:
++			printf("Recognized Chestnut 43 expansion board (rev %d %s)\n",
++				expansion_config.revision, expansion_config.data);
++			setenv("defaultdisplay", "lcd43");
++			break;
++		case GUMSTIX_PINTO:
++			printf("Recognized Pinto expansion board (rev %d %s)\n",
++				expansion_config.revision, expansion_config.data);
++			break;
++		case GUMSTIX_NO_EEPROM:
++			printf("No EEPROM on expansion board\n");
++			break;
++		case GUMSTIX_UNKNOWN:
++			printf("Unrecognized expansion board\n");
++	}
++
++	i2c_set_bus_num(TWL4030_I2C_BUS);
+ 	twl4030_power_init();
+ 	twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
+ 
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0008-OMAP3-Overo-enable-config-eeprom-to-set-u-boot-env-v.patch b/recipes-bsp/u-boot/u-boot/0008-OMAP3-Overo-enable-config-eeprom-to-set-u-boot-env-v.patch
new file mode 100644
index 0000000..c7aea04
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0008-OMAP3-Overo-enable-config-eeprom-to-set-u-boot-env-v.patch
@@ -0,0 +1,81 @@
+From 4fb2bbcae8f283c46e762aa93b25cbbd55bab8b6 Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Tue, 16 Feb 2010 09:58:01 -0800
+Subject: [PATCH 08/37] OMAP3: Overo: enable config eeprom to set u-boot env variable
+
+---
+ board/overo/overo.c |   21 +++++++++++++--------
+ 1 files changed, 13 insertions(+), 8 deletions(-)
+
+diff --git a/board/overo/overo.c b/board/overo/overo.c
+index 2838a1f..f6093d2 100644
+--- a/board/overo/overo.c
++++ b/board/overo/overo.c
+@@ -43,7 +43,9 @@ static struct {
+ 	unsigned int device_vendor;
+ 	unsigned char revision;
+ 	unsigned char content;
+-	unsigned char data[6];
++	unsigned char fab_revision[8];
++	unsigned char env_var[16];
++	unsigned char env_setting[64];
+ } expansion_config;
+ 
+ #define TWL4030_I2C_BUS			0
+@@ -209,36 +211,36 @@ int misc_init_r(void)
+ 	switch (get_expansion_id()) {
+ 		case GUMSTIX_SUMMIT:
+ 			printf("Recognized Summit expansion board (rev %d %s)\n",
+-				expansion_config.revision, expansion_config.data);
++				expansion_config.revision, expansion_config.fab_revision);
+ 			setenv("defaultdisplay", "dvi");
+ 			break;
+ 		case GUMSTIX_TOBI:
+ 			printf("Recognized Tobi expansion board (rev %d %s)\n",
+-				expansion_config.revision, expansion_config.data);
++				expansion_config.revision, expansion_config.fab_revision);
+ 			setenv("defaultdisplay", "dvi");
+ 			break;
+ 		case GUMSTIX_TOBI_DUO:
+ 			printf("Recognized Tobi Duo expansion board (rev %d %s)\n",
+-				expansion_config.revision, expansion_config.data);
++				expansion_config.revision, expansion_config.fab_revision);
+ 			break;
+ 		case GUMSTIX_PALO35:
+ 			printf("Recognized Palo 35 expansion board (rev %d %s)\n",
+-				expansion_config.revision, expansion_config.data);
++				expansion_config.revision, expansion_config.fab_revision);
+ 			setenv("defaultdisplay", "lcd35");
+ 			break;
+ 		case GUMSTIX_PALO43:
+ 			printf("Recognized Palo 43 expansion board (rev %d %s)\n",
+-				expansion_config.revision, expansion_config.data);
++				expansion_config.revision, expansion_config.fab_revision);
+ 			setenv("defaultdisplay", "lcd43");
+ 			break;
+ 		case GUMSTIX_CHESTNUT43:
+ 			printf("Recognized Chestnut 43 expansion board (rev %d %s)\n",
+-				expansion_config.revision, expansion_config.data);
++				expansion_config.revision, expansion_config.fab_revision);
+ 			setenv("defaultdisplay", "lcd43");
+ 			break;
+ 		case GUMSTIX_PINTO:
+ 			printf("Recognized Pinto expansion board (rev %d %s)\n",
+-				expansion_config.revision, expansion_config.data);
++				expansion_config.revision, expansion_config.fab_revision);
+ 			break;
+ 		case GUMSTIX_NO_EEPROM:
+ 			printf("No EEPROM on expansion board\n");
+@@ -247,6 +249,9 @@ int misc_init_r(void)
+ 			printf("Unrecognized expansion board\n");
+ 	}
+ 
++	if (expansion_config.content == 1)
++		setenv(expansion_config.env_var, expansion_config.env_setting);
++
+ 	i2c_set_bus_num(TWL4030_I2C_BUS);
+ 	twl4030_power_init();
+ 	twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0009-OMAP3-Overo-enable-input-on-MMC1_CLK-and-MMC3_CLK-pi.patch b/recipes-bsp/u-boot/u-boot/0009-OMAP3-Overo-enable-input-on-MMC1_CLK-and-MMC3_CLK-pi.patch
new file mode 100644
index 0000000..b690a6c
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0009-OMAP3-Overo-enable-input-on-MMC1_CLK-and-MMC3_CLK-pi.patch
@@ -0,0 +1,34 @@
+From 0ddd7f44f04b47d16d33a6b232b288ebdb1c9992 Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Tue, 16 Feb 2010 10:00:45 -0800
+Subject: [PATCH 09/37] OMAP3: Overo: enable input on MMC1_CLK and MMC3_CLK pinmux
+
+---
+ board/overo/overo.h |    4 ++--
+ 1 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/board/overo/overo.h b/board/overo/overo.h
+index e120e09..ff936dd 100644
+--- a/board/overo/overo.h
++++ b/board/overo/overo.h
+@@ -200,7 +200,7 @@ const omap3_sysinfo sysinfo = {
+ 	MUX_VAL(CP(MCBSP2_DR),		(IEN  | PTD | DIS | M0)) /*McBSP2_DR*/\
+ 	MUX_VAL(CP(MCBSP2_DX),		(IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\
+  /*Expansion card */\
+-	MUX_VAL(CP(MMC1_CLK),		(IDIS | PTU | EN  | M0)) /*MMC1_CLK*/\
++	MUX_VAL(CP(MMC1_CLK),		(IEN  | PTU | EN  | M0)) /*MMC1_CLK*/\
+ 	MUX_VAL(CP(MMC1_CMD),		(IEN  | PTU | EN  | M0)) /*MMC1_CMD*/\
+ 	MUX_VAL(CP(MMC1_DAT0),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT0*/\
+ 	MUX_VAL(CP(MMC1_DAT1),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT1*/\
+@@ -301,7 +301,7 @@ const omap3_sysinfo sysinfo = {
+ 	MUX_VAL(CP(SYS_OFF_MODE),	(IEN  | PTD | DIS | M0)) /*SYS_OFF_MODE*/\
+ 	MUX_VAL(CP(SYS_CLKOUT1),	(IEN  | PTD | DIS | M0)) /*SYS_CLKOUT1*/\
+ 	MUX_VAL(CP(SYS_CLKOUT2),	(IEN  | PTU | EN  | M4)) /*GPIO_186*/\
+-	MUX_VAL(CP(ETK_CLK_ES2),	(IDIS | PTU | EN  | M2)) /*MMC3_CLK*/\
++	MUX_VAL(CP(ETK_CLK_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_CLK*/\
+ 	MUX_VAL(CP(ETK_CTL_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_CMD*/\
+ 	MUX_VAL(CP(ETK_D0_ES2),		(IEN  | PTU | EN  | M4)) /*GPIO_14*/\
+ 	MUX_VAL(CP(ETK_D1_ES2),		(IEN  | PTD | EN  | M4)) /*GPIO_15 - X_GATE*/\
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0010-OMAP3-Overo-set-CONFIG_SYS_I2C_SPEED-to-400Khz.patch b/recipes-bsp/u-boot/u-boot/0010-OMAP3-Overo-set-CONFIG_SYS_I2C_SPEED-to-400Khz.patch
new file mode 100644
index 0000000..53e12b3
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0010-OMAP3-Overo-set-CONFIG_SYS_I2C_SPEED-to-400Khz.patch
@@ -0,0 +1,25 @@
+From 405a5a151c8d42f157dc48731f6e607675156774 Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Tue, 16 Feb 2010 10:03:14 -0800
+Subject: [PATCH 10/37] OMAP3: Overo: set CONFIG_SYS_I2C_SPEED to 400Khz
+
+---
+ include/configs/omap3_overo.h |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
+index 295cce6..fdbeb67 100644
+--- a/include/configs/omap3_overo.h
++++ b/include/configs/omap3_overo.h
+@@ -112,7 +112,7 @@
+ 
+ #define CONFIG_SYS_NO_FLASH
+ #define CONFIG_HARD_I2C			1
+-#define CONFIG_SYS_I2C_SPEED		100000
++#define CONFIG_SYS_I2C_SPEED		400000
+ #define CONFIG_SYS_I2C_SLAVE		1
+ #define CONFIG_SYS_I2C_BUS		0
+ #define CONFIG_SYS_I2C_BUS_SELECT	1
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0011-OMAP3-trim-excessively-long-delays-in-i2c-driver.patch b/recipes-bsp/u-boot/u-boot/0011-OMAP3-trim-excessively-long-delays-in-i2c-driver.patch
new file mode 100644
index 0000000..6a3a5d9
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0011-OMAP3-trim-excessively-long-delays-in-i2c-driver.patch
@@ -0,0 +1,52 @@
+From 991f54c9da846ab9571c256adf42d8d80d044bdc Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Tue, 16 Feb 2010 10:04:30 -0800
+Subject: [PATCH 11/37] OMAP3:  trim excessively long delays in i2c driver
+
+---
+ drivers/i2c/omap24xx_i2c.c |    8 ++++----
+ 1 files changed, 4 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c
+index 30a8b4c..ba47fc4 100644
+--- a/drivers/i2c/omap24xx_i2c.c
++++ b/drivers/i2c/omap24xx_i2c.c
+@@ -148,7 +148,7 @@ static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value)
+ 	if (status & I2C_STAT_XRDY) {
+ 		/* Important: have to use byte access */
+ 		writeb (regoffset, &i2c_base->data);
+-		udelay (20000);
++		udelay (2000);
+ 		if (readw (&i2c_base->stat) & I2C_STAT_NACK) {
+ 			i2c_error = 1;
+ 		}
+@@ -160,7 +160,7 @@ static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value)
+ 		/* free bus, otherwise we can't use a combined transction */
+ 		writew (0, &i2c_base->con);
+ 		while (readw (&i2c_base->stat) || (readw (&i2c_base->con) & I2C_CON_MST)) {
+-			udelay (10000);
++			udelay (1000);
+ 			/* Have to clear pending interrupt to clear I2C_STAT */
+ 			writew (0xFFFF, &i2c_base->stat);
+ 		}
+@@ -181,7 +181,7 @@ static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value)
+ #else
+ 			*value = readw (&i2c_base->data);
+ #endif
+-			udelay (20000);
++			udelay (2000);
+ 		} else {
+ 			i2c_error = 1;
+ 		}
+@@ -190,7 +190,7 @@ static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value)
+ 			writew (I2C_CON_EN, &i2c_base->con);
+ 			while (readw (&i2c_base->stat)
+ 			       || (readw (&i2c_base->con) & I2C_CON_MST)) {
+-				udelay (10000);
++				udelay (1000);
+ 				writew (0xFFFF, &i2c_base->stat);
+ 			}
+ 		}
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0012-OMAP3-Overo-allow-expansion-boards-with-any-vendor-I.patch b/recipes-bsp/u-boot/u-boot/0012-OMAP3-Overo-allow-expansion-boards-with-any-vendor-I.patch
new file mode 100644
index 0000000..b554d25
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0012-OMAP3-Overo-allow-expansion-boards-with-any-vendor-I.patch
@@ -0,0 +1,47 @@
+From ad1a2c047554deae2e1608d025c4f6891cf8f116 Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Fri, 26 Feb 2010 12:40:26 -0800
+Subject: [PATCH 12/37] OMAP3: Overo: allow expansion boards with any vendor ID
+
+---
+ board/overo/overo.c |   10 +++-------
+ 1 files changed, 3 insertions(+), 7 deletions(-)
+
+diff --git a/board/overo/overo.c b/board/overo/overo.c
+index f6093d2..ec186ec 100644
+--- a/board/overo/overo.c
++++ b/board/overo/overo.c
+@@ -63,8 +63,7 @@ static struct {
+ #define GUMSTIX_CHESTNUT43		0x06000200
+ #define GUMSTIX_PINTO			0x07000200
+ 
+-#define GUMSTIX_NO_EEPROM		0xfffffffe
+-#define GUMSTIX_UNKNOWN			0xffffffff
++#define GUMSTIX_NO_EEPROM		0xffffffff
+ 
+ #if defined(CONFIG_CMD_NET)
+ static void setup_net_chip(void);
+@@ -174,10 +173,7 @@ unsigned int get_expansion_id(void)
+ 	i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 1, (u8 *)&expansion_config,
+ 		 sizeof(expansion_config));
+ 
+-	if ( (expansion_config.device_vendor & 0xffff) != GUMSTIX_VENDORID )
+-		return GUMSTIX_UNKNOWN;
+-	else
+-		return expansion_config.device_vendor;
++	return expansion_config.device_vendor;
+ }
+ 
+ 
+@@ -245,7 +241,7 @@ int misc_init_r(void)
+ 		case GUMSTIX_NO_EEPROM:
+ 			printf("No EEPROM on expansion board\n");
+ 			break;
+-		case GUMSTIX_UNKNOWN:
++		default:
+ 			printf("Unrecognized expansion board\n");
+ 	}
+ 
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0013-OMAP3-Overo-change-address-of-expansion-eeprom-to-0x.patch b/recipes-bsp/u-boot/u-boot/0013-OMAP3-Overo-change-address-of-expansion-eeprom-to-0x.patch
new file mode 100644
index 0000000..4bbddcb
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0013-OMAP3-Overo-change-address-of-expansion-eeprom-to-0x.patch
@@ -0,0 +1,25 @@
+From 305e2cb16f4f6e8c7f13120e6a98bb1e999c764f Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Fri, 26 Feb 2010 12:42:30 -0800
+Subject: [PATCH 13/37] OMAP3: Overo: change address of expansion eeprom to 0x51 so as to not conflict with EDID address
+
+---
+ board/overo/overo.c |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/board/overo/overo.c b/board/overo/overo.c
+index ec186ec..f96e7ff 100644
+--- a/board/overo/overo.c
++++ b/board/overo/overo.c
+@@ -51,7 +51,7 @@ static struct {
+ #define TWL4030_I2C_BUS			0
+ 
+ #define EXPANSION_EEPROM_I2C_BUS	2
+-#define EXPANSION_EEPROM_I2C_ADDRESS	0x50
++#define EXPANSION_EEPROM_I2C_ADDRESS	0x51
+ 
+ #define GUMSTIX_VENDORID		0x0200
+ 
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0014-OMAP3-board.c-don-t-attempt-to-set-up-second-RAM-ban.patch b/recipes-bsp/u-boot/u-boot/0014-OMAP3-board.c-don-t-attempt-to-set-up-second-RAM-ban.patch
new file mode 100644
index 0000000..2936dff
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0014-OMAP3-board.c-don-t-attempt-to-set-up-second-RAM-ban.patch
@@ -0,0 +1,49 @@
+From 63de99ce613bbfce792ee46d14b324273e6a0d29 Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Tue, 23 Mar 2010 09:04:50 -0700
+Subject: [PATCH 14/37] OMAP3: board.c: don't attempt to set up second RAM bank, assume x-load has already done this
+
+---
+ cpu/arm_cortexa8/omap3/board.c |   19 +++++++++----------
+ 1 files changed, 9 insertions(+), 10 deletions(-)
+
+diff --git a/cpu/arm_cortexa8/omap3/board.c b/cpu/arm_cortexa8/omap3/board.c
+index 7b78fa4..0126152 100644
+--- a/cpu/arm_cortexa8/omap3/board.c
++++ b/cpu/arm_cortexa8/omap3/board.c
+@@ -232,6 +232,7 @@ void s_init(void)
+ 
+ 	per_clocks_enable();
+ 
++	/* FIXME: u-boot's sdrc setup is broken	*/
+ 	if (!in_sdram)
+ 		sdrc_init();
+ }
+@@ -281,16 +282,14 @@ int dram_init(void)
+ {
+ 	DECLARE_GLOBAL_DATA_PTR;
+ 	unsigned int size0 = 0, size1 = 0;
+-
+-	/*
+-	 * If a second bank of DDR is attached to CS1 this is
+-	 * where it can be started.  Early init code will init
+-	 * memory on CS0.
+-	 */
+-	if ((sysinfo.mtype == DDR_COMBO) || (sysinfo.mtype == DDR_STACKED)) {
+-		do_sdrc_init(CS1, NOT_EARLY);
+-		make_cs1_contiguous();
+-	}
++	struct sdrc *sdrc_base = (struct sdrc *)OMAP34XX_SDRC_BASE;
++	struct sdrc_actim *sdrc_actim_base = (struct sdrc_actim *)SDRC_ACTIM_CTRL1_BASE;
++
++	/* x-load sets up the second bank but */
++	/* doesn't test to see if it is there */
++	/* do so now, disable if not present  */
++	if (!mem_ok(CS1))
++		writel(0, &sdrc_base->cs[1].mcfg);
+ 
+ 	size0 = get_sdr_cs_size(CS0);
+ 	size1 = get_sdr_cs_size(CS1);
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0015-OMAP3-mem.c-enhance-the-RAM-test.patch b/recipes-bsp/u-boot/u-boot/0015-OMAP3-mem.c-enhance-the-RAM-test.patch
new file mode 100644
index 0000000..ce3c3b8
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0015-OMAP3-mem.c-enhance-the-RAM-test.patch
@@ -0,0 +1,52 @@
+From f2e3d22fb1963d08844edee45f7d7d6beba32152 Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Tue, 23 Mar 2010 09:06:49 -0700
+Subject: [PATCH 15/37] OMAP3: mem.c: enhance the RAM test
+
+---
+ cpu/arm_cortexa8/omap3/mem.c |   28 +++++++++++++++-------------
+ 1 files changed, 15 insertions(+), 13 deletions(-)
+
+diff --git a/cpu/arm_cortexa8/omap3/mem.c b/cpu/arm_cortexa8/omap3/mem.c
+index dfb7e4c..b828097 100644
+--- a/cpu/arm_cortexa8/omap3/mem.c
++++ b/cpu/arm_cortexa8/omap3/mem.c
+@@ -106,21 +106,23 @@ void make_cs1_contiguous(void)
+  *******************************************************/
+ u32 mem_ok(u32 cs)
+ {
+-	u32 val1, val2, addr;
++	u32 i, val1, val2, addr, size;
+ 	u32 pattern = 0x12345678;
+ 
+-	addr = OMAP34XX_SDRC_CS0 + get_sdr_cs_offset(cs);
+-
+-	writel(0x0, addr + 0x400);	/* clear pos A */
+-	writel(pattern, addr);		/* pattern to pos B */
+-	writel(0x0, addr + 4);		/* remove pattern off the bus */
+-	val1 = readl(addr + 0x400);	/* get pos A value */
+-	val2 = readl(addr);		/* get val2 */
++	size = get_sdr_cs_offset(cs);
++	addr = OMAP34XX_SDRC_CS0 + size;
++	
++	for (i = 0; i < size; i+=1024) {
++		writel(pattern - i, addr + i);
++	}
+ 
+-	if ((val1 != 0) || (val2 != pattern))	/* see if pos A val changed */
+-		return 0;
+-	else
+-		return 1;
++	for (i = 0; i < size; i+=1024) {
++		val1 = readl(addr + i);
++		if (val1 != (pattern - i)) {
++			return 0;
++		}
++	}
++	return 1;
+ }
+ 
+ /********************************************************
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0016-env_nand.c-fail-gracefully-if-no-nand-is-present.patch b/recipes-bsp/u-boot/u-boot/0016-env_nand.c-fail-gracefully-if-no-nand-is-present.patch
new file mode 100644
index 0000000..5e83125
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0016-env_nand.c-fail-gracefully-if-no-nand-is-present.patch
@@ -0,0 +1,27 @@
+From 794e4aa6a5aa5fbe71b08bfe8f5f5f65078fbc68 Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Tue, 23 Mar 2010 09:12:16 -0700
+Subject: [PATCH 16/37] env_nand.c:  fail gracefully if no nand is present
+
+---
+ common/env_nand.c |    4 ++++
+ 1 files changed, 4 insertions(+), 0 deletions(-)
+
+diff --git a/common/env_nand.c b/common/env_nand.c
+index a15a950..325f112 100644
+--- a/common/env_nand.c
++++ b/common/env_nand.c
+@@ -268,6 +268,10 @@ int readenv (size_t offset, u_char * buf)
+ 
+ 	u_char *char_ptr;
+ 
++	/* fail if no nand detected */
++	if (nand_info[0].type == 0)
++		return 1;
++
+ 	blocksize = nand_info[0].erasesize;
+ 	len = min(blocksize, CONFIG_ENV_SIZE);
+ 
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0017-OMAP3-add-definitions-to-support-sysinfo-cpu-and-cpu.patch b/recipes-bsp/u-boot/u-boot/0017-OMAP3-add-definitions-to-support-sysinfo-cpu-and-cpu.patch
new file mode 100644
index 0000000..ad5a213
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0017-OMAP3-add-definitions-to-support-sysinfo-cpu-and-cpu.patch
@@ -0,0 +1,68 @@
+From 34622e1e89b615c999480ab48ec004c16f8ca2d5 Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Tue, 23 Mar 2010 09:15:29 -0700
+Subject: [PATCH 17/37] OMAP3: add definitions to support sysinfo cpu and cpu family detection
+
+---
+ include/asm-arm/arch-omap3/cpu.h   |    6 ------
+ include/asm-arm/arch-omap3/omap3.h |   29 +++++++++++++++++++++++++++++
+ 2 files changed, 29 insertions(+), 6 deletions(-)
+
+diff --git a/include/asm-arm/arch-omap3/cpu.h b/include/asm-arm/arch-omap3/cpu.h
+index f769571..d9eec7e 100644
+--- a/include/asm-arm/arch-omap3/cpu.h
++++ b/include/asm-arm/arch-omap3/cpu.h
+@@ -60,12 +60,6 @@ struct ctrl {
+ #endif /* __ASSEMBLY__ */
+ #endif /* __KERNEL_STRICT_NAMES */
+ 
+-/* cpu type */
+-#define OMAP3503		0x5c00
+-#define OMAP3515		0x1c00
+-#define OMAP3525		0x4c00
+-#define OMAP3530		0x0c00
+-
+ #ifndef __KERNEL_STRICT_NAMES
+ #ifndef __ASSEMBLY__
+ struct ctrl_id {
+diff --git a/include/asm-arm/arch-omap3/omap3.h b/include/asm-arm/arch-omap3/omap3.h
+index 1349b8b..3957c79 100644
+--- a/include/asm-arm/arch-omap3/omap3.h
++++ b/include/asm-arm/arch-omap3/omap3.h
+@@ -184,4 +184,33 @@ struct gpio {
+ #define WIDTH_8BIT		0x0000
+ #define WIDTH_16BIT		0x1000	/* bit pos for 16 bit in gpmc */
+ 
++/*
++ * Hawkeye values
++ */
++#define HAWKEYE_OMAP34XX	0xb7ae
++#define HAWKEYE_AM35XX		0xb868
++#define HAWKEYE_OMAP36XX	0xb891
++
++#define HAWKEYE_SHIFT		12
++
++/*
++ * Define CPU families
++ */
++#define CPU_OMAP34XX		0x3400	/* OMAP34xx/OMAP35 devices */
++#define CPU_AM35XX		0x3500	/* AM35xx devices          */
++#define CPU_OMAP36XX		0x3600	/* OMAP36xx devices        */
++
++/*
++ * Control status register values corresponding to cpu variants
++ */
++#define OMAP3503		0x5c00
++#define OMAP3515		0x1c00
++#define OMAP3525		0x4c00
++#define OMAP3530		0x0c00
++
++#define AM3505			0x5c00
++#define AM3517			0x1c00
++
++#define OMAP3730		0x0c00
++
+ #endif
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0018-OMAP3-sys_info-update-cpu-detection-for-36XX-37XX.patch b/recipes-bsp/u-boot/u-boot/0018-OMAP3-sys_info-update-cpu-detection-for-36XX-37XX.patch
new file mode 100644
index 0000000..65f606b
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0018-OMAP3-sys_info-update-cpu-detection-for-36XX-37XX.patch
@@ -0,0 +1,196 @@
+From 8480eb0272865078290146031e09eb70baed3f6e Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Tue, 23 Mar 2010 09:17:59 -0700
+Subject: [PATCH 18/37] OMAP3 sys_info: update cpu detection for 36XX/37XX
+
+---
+ cpu/arm_cortexa8/omap3/sys_info.c |  137 ++++++++++++++++++++++++++++---------
+ 1 files changed, 105 insertions(+), 32 deletions(-)
+
+diff --git a/cpu/arm_cortexa8/omap3/sys_info.c b/cpu/arm_cortexa8/omap3/sys_info.c
+index e227f67..e32a846 100644
+--- a/cpu/arm_cortexa8/omap3/sys_info.c
++++ b/cpu/arm_cortexa8/omap3/sys_info.c
+@@ -79,32 +79,72 @@ u32 get_cpu_type(void)
+ }
+ 
+ /******************************************
+- * get_cpu_rev(void) - extract version info
++ * get_cpu_id(void) - extract cpu id
++ * returns 0 for ES1.0, cpuid otherwise
+  ******************************************/
+-u32 get_cpu_rev(void)
++u32 get_cpu_id(void)
+ {
+-	u32 cpuid = 0;
+ 	struct ctrl_id *id_base;
++	u32 cpuid = 0;
+ 
+ 	/*
+ 	 * On ES1.0 the IDCODE register is not exposed on L4
+ 	 * so using CPU ID to differentiate between ES1.0 and > ES1.0.
+ 	 */
+ 	__asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0":"=r"(cpuid));
+-	if ((cpuid & 0xf) == 0x0)
+-		return CPU_3XX_ES10;
+-	else {
++	if ((cpuid & 0xf) == 0x0) {
++		return 0;
++	} else {
+ 		/* Decode the IDs on > ES1.0 */
+ 		id_base = (struct ctrl_id *) OMAP34XX_ID_L4_IO_BASE;
+ 
+-		cpuid = (readl(&id_base->idcode) >> CPU_3XX_ID_SHIFT) & 0xf;
++		cpuid = readl(&id_base->idcode);
++	}
+ 
+-		/* Some early ES2.0 seem to report ID 0, fix this */
+-		if(cpuid == 0)
+-			cpuid = CPU_3XX_ES20;
++	return cpuid;
++}
+ 
+-		return cpuid;
++/******************************************
++ * get_cpu_family(void) - extract cpu info
++ ******************************************/
++u32 get_cpu_family(void)
++{
++	u16 hawkeye;
++	u32 cpu_family;
++	u32 cpuid = get_cpu_id();
++
++	if (cpuid == 0)
++		return CPU_OMAP34XX;
++
++	hawkeye = (cpuid >> HAWKEYE_SHIFT) & 0xffff;
++	switch(hawkeye) {
++		case HAWKEYE_OMAP34XX:
++			cpu_family = CPU_OMAP34XX;
++			break;
++		case HAWKEYE_AM35XX:
++			cpu_family = CPU_AM35XX;
++			break;
++		case HAWKEYE_OMAP36XX:
++			cpu_family = CPU_OMAP36XX;
++			break;
++		default:
++			cpu_family = CPU_OMAP34XX;
+ 	}
++
++	return cpu_family;
++}
++
++/******************************************
++ * get_cpu_rev(void) - extract version info
++ ******************************************/
++u32 get_cpu_rev(void)
++{
++	u32 cpuid = get_cpu_id();
++
++	if (cpuid == 0)
++		return CPU_3XX_ES10;
++	else
++		return (cpuid >> CPU_3XX_ID_SHIFT) & 0xf;
+ }
+ 
+ /*****************************************************************
+@@ -267,24 +307,57 @@ u32 get_device_type(void)
+  */
+ int print_cpuinfo (void)
+ {
+-	char *cpu_s, *sec_s;
+-
+-	switch (get_cpu_type()) {
+-	case OMAP3503:
+-		cpu_s = "3503";
+-		break;
+-	case OMAP3515:
+-		cpu_s = "3515";
++	char *cpu_family_s, *cpu_s, *sec_s;
++
++	switch(get_cpu_family()) {
++	case CPU_OMAP34XX:
++		cpu_family_s = "OMAP";
++		switch (get_cpu_type()) {
++		case OMAP3503:
++			cpu_s = "3503";
++			break;
++		case OMAP3515:
++			cpu_s = "3515";
++			break;
++		case OMAP3525:
++			cpu_s = "3525";
++			break;
++		case OMAP3530:
++			cpu_s = "3530";
++			break;
++		default:
++			cpu_s = "35XX";
++			break;
++		}
+ 		break;
+-	case OMAP3525:
+-		cpu_s = "3525";
++	case CPU_AM35XX:
++		cpu_family_s = "AM";
++		switch (get_cpu_type()) {
++		case AM3505:
++			cpu_s = "3505";
++			break;
++		case AM3517:
++			cpu_s = "3517";
++			break;
++		default:
++			cpu_s = "35XX";
++			break;
++		}
+ 		break;
+-	case OMAP3530:
+-		cpu_s = "3530";
++	case CPU_OMAP36XX:
++		cpu_family_s = "OMAP";
++		switch (get_cpu_type()) {
++		case OMAP3730:
++			cpu_s = "3630/3730";
++			break;
++		default:
++			cpu_s = "36XX/37XX";
++			break;
++		}
+ 		break;
+ 	default:
++		cpu_family_s = "OMAP";
+ 		cpu_s = "35XX";
+-		break;
+ 	}
+ 
+ 	switch (get_device_type()) {
+@@ -304,16 +377,16 @@ int print_cpuinfo (void)
+ 		sec_s = "?";
+ 	}
+ 
+-	printf("OMAP%s-%s ES%s, CPU-OPP2, L3-165MHz, ",
+-			cpu_s, sec_s, rev_s[get_cpu_rev()]);
++	printf("%s%s-%s ES%s, CPU-OPP2, L3-165MHz, ",
++			cpu_family_s, cpu_s, sec_s, rev_s[get_cpu_rev()]);
+ 
+-	printf("Max clock-");
+-	if ((get_cpu_rev() >= CPU_3XX_ES31) && (get_sku_id() == SKUID_CLK_720MHZ))
+-		printf("720Mhz\n");
+-	else	printf("600Mhz\n");
++	if (get_cpu_family() == CPU_OMAP34XX)
++		if ((get_cpu_rev() >= CPU_3XX_ES31) && 
++		    (get_sku_id() == SKUID_CLK_720MHZ))
++			printf("Max clock-720Mhz\n");
++		else printf("Max clock-600Mhz\n");
++	else printf("\n");
+ 	
+-
+-
+ 	return 0;
+ }
+ #endif	/* CONFIG_DISPLAY_CPUINFO */
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0019-OMAP3-clocks-update-clock-setup-for-36XX-37XX.patch b/recipes-bsp/u-boot/u-boot/0019-OMAP3-clocks-update-clock-setup-for-36XX-37XX.patch
new file mode 100644
index 0000000..e5dbec6
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0019-OMAP3-clocks-update-clock-setup-for-36XX-37XX.patch
@@ -0,0 +1,826 @@
+From 0bf419a0faa8c9dc73d7a84f93d7fcb89be3ea21 Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Tue, 23 Mar 2010 09:20:56 -0700
+Subject: [PATCH 19/37] OMAP3: clocks: update clock setup for 36XX/37XX
+
+---
+ cpu/arm_cortexa8/omap3/clock.c            |  559 +++++++++++++++++++++--------
+ cpu/arm_cortexa8/omap3/lowlevel_init.S    |   69 ++++
+ include/asm-arm/arch-omap3/clocks.h       |   17 +
+ include/asm-arm/arch-omap3/clocks_omap3.h |   27 ++
+ 4 files changed, 525 insertions(+), 147 deletions(-)
+
+diff --git a/cpu/arm_cortexa8/omap3/clock.c b/cpu/arm_cortexa8/omap3/clock.c
+index 6330c9e..538a183 100644
+--- a/cpu/arm_cortexa8/omap3/clock.c
++++ b/cpu/arm_cortexa8/omap3/clock.c
+@@ -47,17 +47,12 @@ u32 get_osc_clk_speed(void)
+ 	struct s32ktimer *s32k_base = (struct s32ktimer *)SYNC_32KTIMER_BASE;
+ 
+ 	val = readl(&prm_base->clksrc_ctrl);
+-
+ 	if (val & SYSCLKDIV_2)
+ 		cdiv = 2;
+-	else if (val & SYSCLKDIV_1)
+-		cdiv = 1;
+ 	else
+-		/*
+-		 * Should never reach here! (Assume divider as 1)
+-		 */
+ 		cdiv = 1;
+ 
++
+ 	/* enable timer2 */
+ 	val = readl(&prcm_base->clksel_wkup) | CLKSEL_GPT1;
+ 
+@@ -67,7 +62,6 @@ u32 get_osc_clk_speed(void)
+ 	/* Enable I and F Clocks for GPT1 */
+ 	val = readl(&prcm_base->iclken_wkup) | EN_GPT1 | EN_32KSYNC;
+ 	writel(val, &prcm_base->iclken_wkup);
+-
+ 	val = readl(&prcm_base->fclken_wkup) | EN_GPT1;
+ 	writel(val, &prcm_base->fclken_wkup);
+ 
+@@ -87,13 +81,10 @@ u32 get_osc_clk_speed(void)
+ 
+ 	/* wait for 40 cycles */
+ 	while (readl(&s32k_base->s32k_cr) < (start + 20)) ;
++
+ 	cend = readl(&gpt1_base->tcrr);		/* get end sys_clk count */
+ 	cdiff = cend - cstart;			/* get elapsed ticks */
+-
+-	if (cdiv == 2)
+-	{
+-		cdiff *= 2;
+-	}
++	cdiff *= cdiv;
+ 
+ 	/* based on number of ticks assign speed */
+ 	if (cdiff > 19000)
+@@ -135,65 +126,25 @@ void get_sys_clkin_sel(u32 osc_clk, u32 *sys_clkin_sel)
+ 	}
+ }
+ 
++/*
++ * OMAP3530 specific functions
++ */
++
+ /******************************************************************************
+- * prcm_init() - inits clocks for PRCM as defined in clocks.h
+- *               called from SRAM, or Flash (using temp SRAM stack).
++ * Initialize CORE DPLL for OMAP34x/35x
+  *****************************************************************************/
+-void prcm_init(void)
++static void dpll3_init_34xx(u32 sil_index, u32 clk_index)
+ {
++	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
++	dpll_param *ptr = (dpll_param *) get_core_dpll_param();
+ 	void (*f_lock_pll) (u32, u32, u32, u32);
+ 	int xip_safe, p0, p1, p2, p3;
+-	u32 osc_clk = 0, sys_clkin_sel;
+-	u32 clk_index, sil_index = 0;
+-	struct prm *prm_base = (struct prm *)PRM_BASE;
+-	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+-	dpll_param *dpll_param_p;
+-
+-	f_lock_pll = (void *) ((u32) &_end_vect - (u32) &_start +
+-				SRAM_VECT_CODE);
+ 
+ 	xip_safe = is_running_in_sram();
+ 
+-	/*
+-	 * Gauge the input clock speed and find out the sys_clkin_sel
+-	 * value corresponding to the input clock.
+-	 */
+-	osc_clk = get_osc_clk_speed();
+-	get_sys_clkin_sel(osc_clk, &sys_clkin_sel);
++	/* Moving to the right sysclk and ES rev base */
++	ptr = ptr + (3 * clk_index) + sil_index;
+ 
+-	/* set input crystal speed */
+-	sr32(&prm_base->clksel, 0, 3, sys_clkin_sel);
+-
+-	/* If the input clock is greater than 19.2M always divide/2 */
+-	if (sys_clkin_sel > 2) {
+-		/* input clock divider */
+-		sr32(&prm_base->clksrc_ctrl, 6, 2, 2);
+-		clk_index = sys_clkin_sel / 2;
+-	} else {
+-		/* input clock divider */
+-		sr32(&prm_base->clksrc_ctrl, 6, 2, 1);
+-		clk_index = sys_clkin_sel;
+-	}
+-
+-	/*
+-	 * The DPLL tables are defined according to sysclk value and
+-	 * silicon revision. The clk_index value will be used to get
+-	 * the values for that input sysclk from the DPLL param table
+-	 * and sil_index will get the values for that SysClk for the
+-	 * appropriate silicon rev.
+-	 */
+-	if (get_cpu_rev())
+-		sil_index = 1;
+-
+-	/* Unlock MPU DPLL (slows things down, and needed later) */
+-	sr32(&prcm_base->clken_pll_mpu, 0, 3, PLL_LOW_POWER_BYPASS);
+-	wait_on_value(ST_MPU_CLK, 0, &prcm_base->idlest_pll_mpu, LDELAY);
+-
+-	/* Getting the base address of Core DPLL param table */
+-	dpll_param_p = (dpll_param *) get_core_dpll_param();
+-
+-	/* Moving it to the right sysclk and ES rev base */
+-	dpll_param_p = dpll_param_p + 3 * clk_index + sil_index;
+ 	if (xip_safe) {
+ 		/*
+ 		 * CORE DPLL
+@@ -208,34 +159,38 @@ void prcm_init(void)
+ 		 * work. write another value and then default value.
+ 		 */
+ 
+-		/* m3x2 */
+-		sr32(&prcm_base->clksel1_emu, 16, 5, CORE_M3X2 + 1);
+-		/* m3x2 */
++		/* CM_CLKSEL1_EMU[DIV_DPLL3] */
++		sr32(&prcm_base->clksel1_emu, 16, 5, (CORE_M3X2 + 1)) ;
+ 		sr32(&prcm_base->clksel1_emu, 16, 5, CORE_M3X2);
+-		/* Set M2 */
+-		sr32(&prcm_base->clksel1_pll, 27, 2, dpll_param_p->m2);
+-		/* Set M */
+-		sr32(&prcm_base->clksel1_pll, 16, 11, dpll_param_p->m);
+-		/* Set N */
+-		sr32(&prcm_base->clksel1_pll, 8, 7, dpll_param_p->n);
+-		/* 96M Src */
++
++		/* M2 (CORE_DPLL_CLKOUT_DIV): CM_CLKSEL1_PLL[27:31] */
++		sr32(&prcm_base->clksel1_pll, 27, 5, ptr->m2);
++
++		/* M (CORE_DPLL_MULT): CM_CLKSEL1_PLL[16:26] */
++		sr32(&prcm_base->clksel1_pll, 16, 11, ptr->m);
++
++		/* N (CORE_DPLL_DIV): CM_CLKSEL1_PLL[8:14] */
++		sr32(&prcm_base->clksel1_pll, 8, 7, ptr->n);
++
++		/* Source is the CM_96M_FCLK: CM_CLKSEL1_PLL[6] */
+ 		sr32(&prcm_base->clksel1_pll, 6, 1, 0);
+-		/* ssi */
++
++		/* SSI */
+ 		sr32(&prcm_base->clksel_core, 8, 4, CORE_SSI_DIV);
+-		/* fsusb */
++		/* FSUSB */
+ 		sr32(&prcm_base->clksel_core, 4, 2, CORE_FUSB_DIV);
+-		/* l4 */
++		/* L4 */
+ 		sr32(&prcm_base->clksel_core, 2, 2, CORE_L4_DIV);
+-		/* l3 */
++		/* L3 */
+ 		sr32(&prcm_base->clksel_core, 0, 2, CORE_L3_DIV);
+-		/* gfx */
+-		sr32(&prcm_base->clksel_gfx, 0, 3, GFX_DIV);
+-		/* reset mgr */
++		/* GFX */
++		sr32(&prcm_base->clksel_gfx,  0, 3, GFX_DIV);
++		/* RESET MGR */
+ 		sr32(&prcm_base->clksel_wkup, 1, 2, WKUP_RSM);
+-		/* FREQSEL */
+-		sr32(&prcm_base->clken_pll, 4, 4, dpll_param_p->fsel);
+-		/* lock mode */
+-		sr32(&prcm_base->clken_pll, 0, 3, PLL_LOCK);
++		/* FREQSEL (CORE_DPLL_FREQSEL): CM_CLKEN_PLL[4:7] */
++		sr32(&prcm_base->clken_pll,   4, 4, ptr->fsel);
++		/* LOCK MODE */
++		sr32(&prcm_base->clken_pll,   0, 3, PLL_LOCK);
+ 
+ 		wait_on_value(ST_CORE_CLK, 1, &prcm_base->idlest_ckgen,
+ 				LDELAY);
+@@ -244,102 +199,411 @@ void prcm_init(void)
+ 		 * if running from flash, jump to small relocated code
+ 		 * area in SRAM.
+ 		 */
++		f_lock_pll = (void *) ((u32) &_end_vect - (u32) &_start +
++				SRAM_VECT_CODE);
++
+ 		p0 = readl(&prcm_base->clken_pll);
+ 		sr32(&p0, 0, 3, PLL_FAST_RELOCK_BYPASS);
+-		sr32(&p0, 4, 4, dpll_param_p->fsel);	/* FREQSEL */
++		/* FREQSEL (CORE_DPLL_FREQSEL): CM_CLKEN_PLL[4:7] */
++		sr32(&p0, 4, 4, ptr->fsel);
+ 
+ 		p1 = readl(&prcm_base->clksel1_pll);
+-		sr32(&p1, 27, 2, dpll_param_p->m2);	/* Set M2 */
+-		sr32(&p1, 16, 11, dpll_param_p->m);	/* Set M */
+-		sr32(&p1, 8, 7, dpll_param_p->n);		/* Set N */
+-		sr32(&p1, 6, 1, 0);	/* set source for 96M */
++		/* M2 (CORE_DPLL_CLKOUT_DIV): CM_CLKSEL1_PLL[27:31] */
++		sr32(&p1, 27, 5, ptr->m2);
++		/* M (CORE_DPLL_MULT): CM_CLKSEL1_PLL[16:26] */
++		sr32(&p1, 16, 11, ptr->m);
++		/* N (CORE_DPLL_DIV): CM_CLKSEL1_PLL[8:14] */
++		sr32(&p1, 8, 7, ptr->n);
++		/* Source is the CM_96M_FCLK: CM_CLKSEL1_PLL[6] */
++		sr32(&p1, 6, 1, 0);
+ 
+ 		p2 = readl(&prcm_base->clksel_core);
+-		sr32(&p2, 8, 4, CORE_SSI_DIV);	/* ssi */
+-		sr32(&p2, 4, 2, CORE_FUSB_DIV);	/* fsusb */
+-		sr32(&p2, 2, 2, CORE_L4_DIV);	/* l4 */
+-		sr32(&p2, 0, 2, CORE_L3_DIV);	/* l3 */
++		/* SSI */
++		sr32(&p2, 8, 4, CORE_SSI_DIV);
++		/* FSUSB */
++		sr32(&p2, 4, 2, CORE_FUSB_DIV);
++		/* L4 */
++		sr32(&p2, 2, 2, CORE_L4_DIV);
++		/* L3 */
++		sr32(&p2, 0, 2, CORE_L3_DIV);
+ 
+ 		p3 = (u32)&prcm_base->idlest_ckgen;
+ 
+ 		(*f_lock_pll) (p0, p1, p2, p3);
+ 	}
++}
+ 
+-	/* PER DPLL */
+-	sr32(&prcm_base->clken_pll, 16, 3, PLL_STOP);
+-	wait_on_value(ST_PERIPH_CLK, 0, &prcm_base->idlest_ckgen, LDELAY);
+-
+-	/* Getting the base address to PER DPLL param table */
+-
+-	/* Set N */
+-	dpll_param_p = (dpll_param *) get_per_dpll_param();
++/******************************************************************************
++ * Initialize PER DPLL for OMAP34x/35x
++ *****************************************************************************/
++static void dpll4_init_34xx(u32 sil_index, u32 clk_index)
++{
++	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
++	dpll_param *ptr = (dpll_param *) get_per_dpll_param();
+ 
+ 	/* Moving it to the right sysclk base */
+-	dpll_param_p = dpll_param_p + clk_index;
++	ptr = ptr + clk_index;
++
++	/* EN_PERIPH_DPLL: CM_CLKEN_PLL[16:18] */
++	sr32(&prcm_base->clken_pll, 16, 3, PLL_STOP);
++	wait_on_value(ST_PERIPH_CLK, 0, &prcm_base->idlest_ckgen, LDELAY);
+ 
+ 	/*
+ 	 * Errata 1.50 Workaround for OMAP3 ES1.0 only
+ 	 * If using default divisors, write default divisor + 1
+ 	 * and then the actual divisor value
+ 	 */
+-	sr32(&prcm_base->clksel1_emu, 24, 5, PER_M6X2 + 1);	/* set M6 */
+-	sr32(&prcm_base->clksel1_emu, 24, 5, PER_M6X2);		/* set M6 */
+-	sr32(&prcm_base->clksel_cam, 0, 5, PER_M5X2 + 1);	/* set M5 */
+-	sr32(&prcm_base->clksel_cam, 0, 5, PER_M5X2);		/* set M5 */
+-	sr32(&prcm_base->clksel_dss, 0, 5, PER_M4X2 + 1);	/* set M4 */
+-	sr32(&prcm_base->clksel_dss, 0, 5, PER_M4X2);		/* set M4 */
+-	sr32(&prcm_base->clksel_dss, 8, 5, PER_M3X2 + 1);	/* set M3 */
+-	sr32(&prcm_base->clksel_dss, 8, 5, PER_M3X2);		/* set M3 */
+-	sr32(&prcm_base->clksel3_pll, 0, 5, dpll_param_p->m2 + 1); /* set M2 */
+-	sr32(&prcm_base->clksel3_pll, 0, 5, dpll_param_p->m2);	/* set M2 */
++	/* M6 */
++	sr32(&prcm_base->clksel1_emu, 24, 5, (PER_M6X2 + 1));
++	sr32(&prcm_base->clksel1_emu, 24, 5, PER_M6X2);
++	/* M5 */
++	sr32(&prcm_base->clksel_cam, 0, 5, (PER_M5X2 + 1));
++	sr32(&prcm_base->clksel_cam, 0, 5, PER_M5X2);
++	/* M4 */
++	sr32(&prcm_base->clksel_dss, 0, 5, (PER_M4X2 + 1));
++	sr32(&prcm_base->clksel_dss, 0, 5, PER_M4X2);
++	/* M3 */
++	sr32(&prcm_base->clksel_dss, 8, 5, (PER_M3X2 + 1));
++	sr32(&prcm_base->clksel_dss, 8, 5, PER_M3X2);
++	/* M2 (DIV_96M): CM_CLKSEL3_PLL[0:4] */
++	sr32(&prcm_base->clksel3_pll, 0, 5, (ptr->m2 + 1));
++	sr32(&prcm_base->clksel3_pll, 0, 5, ptr->m2);
+ 	/* Workaround end */
+ 
+-	sr32(&prcm_base->clksel2_pll, 8, 11, dpll_param_p->m);	/* set m */
+-	sr32(&prcm_base->clksel2_pll, 0, 7, dpll_param_p->n);	/* set n */
+-	sr32(&prcm_base->clken_pll, 20, 4, dpll_param_p->fsel);	/* FREQSEL */
+-	sr32(&prcm_base->clken_pll, 16, 3, PLL_LOCK);		/* lock mode */
++	/* M (PERIPH_DPLL_MULT): CM_CLKSEL2_PLL[8:18] */
++	sr32(&prcm_base->clksel2_pll, 8, 11, ptr->m);
++
++	/* N (PERIPH_DPLL_DIV): CM_CLKSEL2_PLL[0:6] */
++	sr32(&prcm_base->clksel2_pll, 0, 7, ptr->n);
++
++	/* FREQSEL (PERIPH_DPLL_FREQSEL): CM_CLKEN_PLL[20:23] */
++	sr32(&prcm_base->clken_pll, 20, 4, ptr->fsel);
++
++	/* LOCK MODE (EN_PERIPH_DPLL): CM_CLKEN_PLL[16:18] */
++	sr32(&prcm_base->clken_pll, 16, 3, PLL_LOCK);
+ 	wait_on_value(ST_PERIPH_CLK, 2, &prcm_base->idlest_ckgen, LDELAY);
++}
+ 
+-	/* Getting the base address to MPU DPLL param table */
+-	dpll_param_p = (dpll_param *) get_mpu_dpll_param();
++static void mpu_init_34xx(u32 sil_index, u32 clk_index)
++{
++	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
++	dpll_param *ptr = (dpll_param *) get_mpu_dpll_param();
+ 
+-	/* Moving it to the right sysclk and ES rev base */
+-	dpll_param_p = dpll_param_p + 3 * clk_index + sil_index;
++	/* Moving to the right sysclk and ES rev base */
++	ptr = ptr + (3 * clk_index) + sil_index;
+ 
+ 	/* MPU DPLL (unlocked already) */
+ 
+-	/* Set M2 */
+-	sr32(&prcm_base->clksel2_pll_mpu, 0, 5, dpll_param_p->m2);
+-	/* Set M */
+-	sr32(&prcm_base->clksel1_pll_mpu, 8, 11, dpll_param_p->m);
+-	/* Set N */
+-	sr32(&prcm_base->clksel1_pll_mpu, 0, 7, dpll_param_p->n);
+-	/* FREQSEL */
+-	sr32(&prcm_base->clken_pll_mpu, 4, 4, dpll_param_p->fsel);
+-	/* lock mode */
+-	sr32(&prcm_base->clken_pll_mpu, 0, 3, PLL_LOCK);
+-	wait_on_value(ST_MPU_CLK, 1, &prcm_base->idlest_pll_mpu, LDELAY);
+-
+-	/* Getting the base address to IVA DPLL param table */
+-	dpll_param_p = (dpll_param *) get_iva_dpll_param();
+-
+-	/* Moving it to the right sysclk and ES rev base */
+-	dpll_param_p = dpll_param_p + 3 * clk_index + sil_index;
+-
+-	/* IVA DPLL (set to 12*20=240MHz) */
++	/* M2 (MPU_DPLL_CLKOUT_DIV) : CM_CLKSEL2_PLL_MPU[0:4] */
++	sr32(&prcm_base->clksel2_pll_mpu, 0, 5, ptr->m2);
++
++	/* M (MPU_DPLL_MULT) : CM_CLKSEL2_PLL_MPU[8:18] */
++	sr32(&prcm_base->clksel1_pll_mpu, 8, 11, ptr->m);
++
++	/* N (MPU_DPLL_DIV) : CM_CLKSEL2_PLL_MPU[0:6] */
++	sr32(&prcm_base->clksel1_pll_mpu, 0, 7, ptr->n);
++
++	/* FREQSEL (MPU_DPLL_FREQSEL) : CM_CLKEN_PLL_MPU[4:7] */
++	sr32(&prcm_base->clken_pll_mpu, 4, 4, ptr->fsel);
++}
++
++static void iva_init_34xx(u32 sil_index, u32 clk_index)
++{
++	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
++	dpll_param *ptr = (dpll_param *) get_iva_dpll_param();
++
++	/* Moving to the right sysclk and ES rev base */
++	ptr = ptr + (3 * clk_index) + sil_index;
++
++	/* IVA DPLL */
++	/* EN_IVA2_DPLL : CM_CLKEN_PLL_IVA2[0:2] */
+ 	sr32(&prcm_base->clken_pll_iva2, 0, 3, PLL_STOP);
+ 	wait_on_value(ST_IVA2_CLK, 0, &prcm_base->idlest_pll_iva2, LDELAY);
+-	/* set M2 */
+-	sr32(&prcm_base->clksel2_pll_iva2, 0, 5, dpll_param_p->m2);
+-	/* set M */
+-	sr32(&prcm_base->clksel1_pll_iva2, 8, 11, dpll_param_p->m);
+-	/* set N */
+-	sr32(&prcm_base->clksel1_pll_iva2, 0, 7, dpll_param_p->n);
+-	/* FREQSEL */
+-	sr32(&prcm_base->clken_pll_iva2, 4, 4, dpll_param_p->fsel);
+-	/* lock mode */
++
++	/* M2 (IVA2_DPLL_CLKOUT_DIV) : CM_CLKSEL2_PLL_IVA2[0:4] */
++	sr32(&prcm_base->clksel2_pll_iva2, 0, 5, ptr->m2);
++
++	/* M (IVA2_DPLL_MULT) : CM_CLKSEL1_PLL_IVA2[8:18] */
++	sr32(&prcm_base->clksel1_pll_iva2, 8, 11, ptr->m);
++
++	/* N (IVA2_DPLL_DIV) : CM_CLKSEL1_PLL_IVA2[0:6] */
++	sr32(&prcm_base->clksel1_pll_iva2, 0, 7, ptr->n);
++
++	/* FREQSEL (IVA2_DPLL_FREQSEL) : CM_CLKEN_PLL_IVA2[4:7] */
++	sr32(&prcm_base->clken_pll_iva2, 4, 4, ptr->fsel);
++
++	/* LOCK MODE (EN_IVA2_DPLL) : CM_CLKEN_PLL_IVA2[0:2] */
+ 	sr32(&prcm_base->clken_pll_iva2, 0, 3, PLL_LOCK);
++
+ 	wait_on_value(ST_IVA2_CLK, 1, &prcm_base->idlest_pll_iva2, LDELAY);
++}
++
++/*
++ * OMAP3630 specific functions
++ */
++
++/******************************************************************************
++ * Initialize PER DPLL for OMAP36x/37x
++ *****************************************************************************/
++static void dpll3_init_36xx(u32 sil_index, u32 clk_index)
++{
++	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
++	dpll_param *ptr = (dpll_param *) get_36x_core_dpll_param();
++	void (*f_lock_pll) (u32, u32, u32, u32);
++	int xip_safe, p0, p1, p2, p3;
++
++	xip_safe = is_running_in_sram();
++
++	/* Moving it to the right sysclk base */
++	ptr += clk_index;
++
++	if (xip_safe) {
++		/* CORE DPLL */
++
++		/* Select relock bypass: CM_CLKEN_PLL[0:2] */
++		sr32(&prcm_base->clken_pll, 0, 3, PLL_FAST_RELOCK_BYPASS);
++		wait_on_value(ST_CORE_CLK, 0, &prcm_base->idlest_ckgen,
++				LDELAY);
++
++		/* CM_CLKSEL1_EMU[DIV_DPLL3] */
++		sr32(&prcm_base->clksel1_emu, 16, 5, CORE_M3X2);
++
++		/* M2 (CORE_DPLL_CLKOUT_DIV): CM_CLKSEL1_PLL[27:31] */
++		sr32(&prcm_base->clksel1_pll, 27, 5, ptr->m2);
++
++		/* M (CORE_DPLL_MULT): CM_CLKSEL1_PLL[16:26] */
++		sr32(&prcm_base->clksel1_pll, 16, 11, ptr->m);
++
++		/* N (CORE_DPLL_DIV): CM_CLKSEL1_PLL[8:14] */
++		sr32(&prcm_base->clksel1_pll, 8, 7, ptr->n);
++
++		/* Source is the CM_96M_FCLK: CM_CLKSEL1_PLL[6] */
++		sr32(&prcm_base->clksel1_pll, 6, 1, 0);
++
++		/* SSI */
++		sr32(&prcm_base->clksel_core, 8, 4, CORE_SSI_DIV);
++		/* FSUSB */
++		sr32(&prcm_base->clksel_core, 4, 2, CORE_FUSB_DIV);
++		/* L4 */
++		sr32(&prcm_base->clksel_core, 2, 2, CORE_L4_DIV);
++		/* L3 */
++		sr32(&prcm_base->clksel_core, 0, 2, CORE_L3_DIV);
++		/* GFX */
++		sr32(&prcm_base->clksel_gfx,  0, 3, GFX_DIV);
++		/* RESET MGR */
++		sr32(&prcm_base->clksel_wkup, 1, 2, WKUP_RSM);
++		/* FREQSEL (CORE_DPLL_FREQSEL): CM_CLKEN_PLL[4:7] */
++		sr32(&prcm_base->clken_pll,   4, 4, ptr->fsel);
++		/* LOCK MODE */
++		sr32(&prcm_base->clken_pll,   0, 3, PLL_LOCK);
++
++		wait_on_value(ST_CORE_CLK, 1, &prcm_base->idlest_ckgen,
++				LDELAY);
++	} else if (is_running_in_flash()) {
++		/*
++		 * if running from flash, jump to small relocated code
++		 * area in SRAM.
++		 */
++		f_lock_pll = (void *) ((u32) &_end_vect - (u32) &_start +
++				SRAM_VECT_CODE);
++
++		p0 = readl(&prcm_base->clken_pll);
++		sr32(&p0, 0, 3, PLL_FAST_RELOCK_BYPASS);
++		/* FREQSEL (CORE_DPLL_FREQSEL): CM_CLKEN_PLL[4:7] */
++		sr32(&p0, 4, 4, ptr->fsel);
++
++		p1 = readl(&prcm_base->clksel1_pll);
++		/* M2 (CORE_DPLL_CLKOUT_DIV): CM_CLKSEL1_PLL[27:31] */
++		sr32(&p1, 27, 5, ptr->m2);
++		/* M (CORE_DPLL_MULT): CM_CLKSEL1_PLL[16:26] */
++		sr32(&p1, 16, 11, ptr->m);
++		/* N (CORE_DPLL_DIV): CM_CLKSEL1_PLL[8:14] */
++		sr32(&p1, 8, 7, ptr->n);
++		/* Source is the CM_96M_FCLK: CM_CLKSEL1_PLL[6] */
++		sr32(&p1, 6, 1, 0);
++
++		p2 = readl(&prcm_base->clksel_core);
++		/* SSI */
++		sr32(&p2, 8, 4, CORE_SSI_DIV);
++		/* FSUSB */
++		sr32(&p2, 4, 2, CORE_FUSB_DIV);
++		/* L4 */
++		sr32(&p2, 2, 2, CORE_L4_DIV);
++		/* L3 */
++		sr32(&p2, 0, 2, CORE_L3_DIV);
++
++		p3 = (u32)&prcm_base->idlest_ckgen;
++
++		(*f_lock_pll) (p0, p1, p2, p3);
++	}
++}
++
++static void dpll4_init_36xx(u32 sil_index, u32 clk_index)
++{
++	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
++	struct dpll_per_36x_param *ptr;
++
++	ptr = (struct dpll_per_36x_param *)get_36x_per_dpll_param();
++
++	/* Moving it to the right sysclk base */
++	ptr += clk_index;
++
++	/* EN_PERIPH_DPLL: CM_CLKEN_PLL[16:18] */
++	sr32(&prcm_base->clken_pll, 16, 3, PLL_STOP);
++	wait_on_value(ST_PERIPH_CLK, 0, &prcm_base->idlest_ckgen, LDELAY);
++
++	/* M6 (DIV_DPLL4): CM_CLKSEL1_EMU[24:29] */
++	sr32(&prcm_base->clksel1_emu, 24, 6, ptr->m6);
++
++	/* M5 (CLKSEL_CAM): CM_CLKSEL1_EMU[0:5] */
++	sr32(&prcm_base->clksel_cam, 0, 6, ptr->m5);
++
++	/* M4 (CLKSEL_DSS1): CM_CLKSEL_DSS[0:5] */
++	sr32(&prcm_base->clksel_dss, 0, 6, ptr->m4);
++
++	/* M3 (CLKSEL_DSS1): CM_CLKSEL_DSS[8:13] */
++	sr32(&prcm_base->clksel_dss, 8, 6, ptr->m3);
++
++	/* M2 (DIV_96M): CM_CLKSEL3_PLL[0:4] */
++	sr32(&prcm_base->clksel3_pll, 0, 5, ptr->m2);
++
++	/* M (PERIPH_DPLL_MULT): CM_CLKSEL2_PLL[8:19] */
++	sr32(&prcm_base->clksel2_pll, 8, 12, ptr->m);
++
++	/* N (PERIPH_DPLL_DIV): CM_CLKSEL2_PLL[0:6] */
++	sr32(&prcm_base->clksel2_pll, 0, 7, ptr->n);
++
++	/* M2DIV (CLKSEL_96M): CM_CLKSEL_CORE[12:13] */
++	sr32(&prcm_base->clksel_core, 12, 2, ptr->m2div);
++
++	/* LOCK MODE (EN_PERIPH_DPLL): CM_CLKEN_PLL[16:18] */
++	sr32(&prcm_base->clken_pll, 16, 3, PLL_LOCK);
++	wait_on_value(ST_PERIPH_CLK, 2, &prcm_base->idlest_ckgen, LDELAY);
++}
++
++static void mpu_init_36xx(u32 sil_index, u32 clk_index)
++{
++	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
++	dpll_param *ptr = (dpll_param *) get_36x_mpu_dpll_param();
++
++	/* Moving to the right sysclk */
++	ptr += clk_index;
++
++	/* MPU DPLL (unlocked already */
++
++	/* M2 (MPU_DPLL_CLKOUT_DIV) : CM_CLKSEL2_PLL_MPU[0:4] */
++	sr32(&prcm_base->clksel2_pll_mpu, 0, 5, ptr->m2);
++
++	/* M (MPU_DPLL_MULT) : CM_CLKSEL2_PLL_MPU[8:18] */
++	sr32(&prcm_base->clksel1_pll_mpu, 8, 11, ptr->m);
++
++	/* N (MPU_DPLL_DIV) : CM_CLKSEL2_PLL_MPU[0:6] */
++	sr32(&prcm_base->clksel1_pll_mpu, 0, 7, ptr->n);
++}
++
++static void iva_init_36xx(u32 sil_index, u32 clk_index)
++{
++	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
++	dpll_param *ptr = (dpll_param *)get_36x_iva_dpll_param();
++
++	/* Moving to the right sysclk */
++	ptr += clk_index;
++
++	/* IVA DPLL */
++	/* EN_IVA2_DPLL : CM_CLKEN_PLL_IVA2[0:2] */
++	sr32(&prcm_base->clken_pll_iva2, 0, 3, PLL_STOP);
++	wait_on_value(ST_IVA2_CLK, 0, &prcm_base->idlest_pll_iva2, LDELAY);
++
++	/* M2 (IVA2_DPLL_CLKOUT_DIV) : CM_CLKSEL2_PLL_IVA2[0:4] */
++	sr32(&prcm_base->clksel2_pll_iva2, 0, 5, ptr->m2);
++
++	/* M (IVA2_DPLL_MULT) : CM_CLKSEL1_PLL_IVA2[8:18] */
++	sr32(&prcm_base->clksel1_pll_iva2, 8, 11, ptr->m);
++
++	/* N (IVA2_DPLL_DIV) : CM_CLKSEL1_PLL_IVA2[0:6] */
++	sr32(&prcm_base->clksel1_pll_iva2, 0, 7, ptr->n);
++
++	/* LOCK (MODE (EN_IVA2_DPLL) : CM_CLKEN_PLL_IVA2[0:2] */
++	sr32(&prcm_base->clken_pll_iva2, 0, 3, PLL_LOCK);
++
++	wait_on_value(ST_IVA2_CLK, 1, &prcm_base->idlest_pll_iva2, LDELAY);
++}
++
++/******************************************************************************
++ * prcm_init() - inits clocks for PRCM as defined in clocks.h
++ *               called from SRAM, or Flash (using temp SRAM stack).
++ *****************************************************************************/
++void prcm_init(void)
++{
++	u32 osc_clk = 0, sys_clkin_sel;
++	u32 clk_index, sil_index = 0;
++	struct prm *prm_base = (struct prm *)PRM_BASE;
++	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
++
++	/*
++	 * Gauge the input clock speed and find out the sys_clkin_sel
++	 * value corresponding to the input clock.
++	 */
++	osc_clk = get_osc_clk_speed();
++	get_sys_clkin_sel(osc_clk, &sys_clkin_sel);
++
++	/* set input crystal speed */
++	sr32(&prm_base->clksel, 0, 3, sys_clkin_sel);
++
++	/* If the input clock is greater than 19.2M always divide/2 */
++	if (sys_clkin_sel > 2) {
++		/* input clock divider */
++		sr32(&prm_base->clksrc_ctrl, 6, 2, 2);
++		clk_index = sys_clkin_sel / 2;
++	} else {
++		/* input clock divider */
++		sr32(&prm_base->clksrc_ctrl, 6, 2, 1);
++		clk_index = sys_clkin_sel;
++	}
++
++	if (get_cpu_family() == CPU_OMAP36XX) {
++		/* Unlock MPU DPLL (slows things down, and needed later) */
++		sr32(&prcm_base->clken_pll_mpu, 0, 3, PLL_LOW_POWER_BYPASS);
++		wait_on_value(ST_MPU_CLK, 0, &prcm_base->idlest_pll_mpu,
++				LDELAY);
++
++		dpll3_init_36xx(0, clk_index);
++		dpll4_init_36xx(0, clk_index);
++		iva_init_36xx(0, clk_index);
++		mpu_init_36xx(0, clk_index);
++
++		/* Lock MPU DPLL to set frequency */
++		sr32(&prcm_base->clken_pll_mpu, 0, 3, PLL_LOCK);
++		wait_on_value(ST_MPU_CLK, 1, &prcm_base->idlest_pll_mpu,
++				LDELAY);
++	} else {
++		/*
++		 * The DPLL tables are defined according to sysclk value and
++		 * silicon revision. The clk_index value will be used to get
++		 * the values for that input sysclk from the DPLL param table
++		 * and sil_index will get the values for that SysClk for the
++		 * appropriate silicon rev.
++		 */
++		if (((get_cpu_family() == CPU_OMAP34XX)
++				&& (get_cpu_rev() >= CPU_3XX_ES20)) ||
++			(get_cpu_family() == CPU_AM35XX))
++			sil_index = 1;
++
++		/* Unlock MPU DPLL (slows things down, and needed later) */
++		sr32(&prcm_base->clken_pll_mpu, 0, 3, PLL_LOW_POWER_BYPASS);
++		wait_on_value(ST_MPU_CLK, 0, &prcm_base->idlest_pll_mpu,
++				LDELAY);
++
++		dpll3_init_34xx(sil_index, clk_index);
++		dpll4_init_34xx(sil_index, clk_index);
++		iva_init_34xx(sil_index, clk_index);
++		mpu_init_34xx(sil_index, clk_index);
++
++		/* Lock MPU DPLL to set frequency */
++		sr32(&prcm_base->clken_pll_mpu, 0, 3, PLL_LOCK);
++		wait_on_value(ST_MPU_CLK, 1, &prcm_base->idlest_pll_mpu,
++				LDELAY);
++	}
+ 
+ 	/* Set up GPTimers to sys_clk source only */
+ 	sr32(&prcm_base->clksel_per, 0, 8, 0xff);
+@@ -414,3 +678,4 @@ void per_clocks_enable(void)
+ 
+ 	sdelay(1000);
+ }
++
+diff --git a/cpu/arm_cortexa8/omap3/lowlevel_init.S b/cpu/arm_cortexa8/omap3/lowlevel_init.S
+index 73063ec..2045e4e 100644
+--- a/cpu/arm_cortexa8/omap3/lowlevel_init.S
++++ b/cpu/arm_cortexa8/omap3/lowlevel_init.S
+@@ -359,3 +359,72 @@ per_dpll_param:
+ get_per_dpll_param:
+ 	adr	r0, per_dpll_param
+ 	mov	pc, lr
++
++/*
++ * Tables for 36x/37x devices
++ *
++ */
++mpu_36x_dpll_param:
++/* 12MHz */
++.word 50, 0, 0, 1
++/* 13MHz */
++.word 600, 12, 0, 1
++/* 19.2MHz */
++.word 125, 3, 0, 1
++/* 26MHz */
++.word 300, 12, 0, 1
++/* 38.4MHz */
++.word 125, 7, 0, 1
++
++iva_36x_dpll_param:
++/* 12MHz */
++.word 130, 2, 0, 1
++/* 13MHz */
++.word 40, 0, 0, 1
++/* 19.2MHz */
++.word 325, 11, 0, 1
++/* 26MHz */
++.word 20, 0, 0, 1
++/* 38.4MHz */
++.word 325, 23, 0, 1
++
++core_36x_dpll_param:
++/* 12MHz */
++.word 100, 2, 0, 1
++/* 13MHz */
++.word 400, 12, 0, 1
++/* 19.2MHz */
++.word 375, 17, 0, 1
++/* 26MHz */
++.word 200, 12, 0, 1
++/* 38.4MHz */
++.word 375, 35, 0, 1
++
++per_36x_dpll_param:
++/*    SYSCLK    M       N      M2      M3      M4     M5      M6      m2DIV */
++.word 12000,    360,    4,     9,      16,     5,     4,      3,      1
++.word 13000,    864,   12,     9,      16,     9,     4,      3,      1
++.word 19200,    360,    7,     9,      16,     5,     4,      3,      1
++.word 26000,    432,   12,     9,      16,     9,     4,      3,      1
++.word 38400,    360,   15,     9,      16,     5,     4,      3,      1
++
++.globl get_36x_mpu_dpll_param
++get_36x_mpu_dpll_param:
++	adr	r0, mpu_36x_dpll_param
++	mov	pc, lr
++
++.globl get_36x_iva_dpll_param
++get_36x_iva_dpll_param:
++	adr	r0, iva_36x_dpll_param
++	mov	pc, lr
++
++.globl get_36x_core_dpll_param
++get_36x_core_dpll_param:
++	adr	r0, core_36x_dpll_param
++	mov	pc, lr
++
++.globl get_36x_per_dpll_param
++get_36x_per_dpll_param:
++	adr	r0, per_36x_dpll_param
++	mov	pc, lr
++
+diff --git a/include/asm-arm/arch-omap3/clocks.h b/include/asm-arm/arch-omap3/clocks.h
+index 71a0cb6..a5f2d08 100644
+--- a/include/asm-arm/arch-omap3/clocks.h
++++ b/include/asm-arm/arch-omap3/clocks.h
+@@ -51,12 +51,29 @@ typedef struct {
+ 	unsigned int m2;
+ } dpll_param;
+ 
++struct dpll_per_36x_param {
++        unsigned int sys_clk;
++        unsigned int m;
++        unsigned int n;
++        unsigned int m2;
++        unsigned int m3;
++        unsigned int m4;
++        unsigned int m5;
++        unsigned int m6;
++        unsigned int m2div;
++};
++
+ /* Following functions are exported from lowlevel_init.S */
+ extern dpll_param *get_mpu_dpll_param(void);
+ extern dpll_param *get_iva_dpll_param(void);
+ extern dpll_param *get_core_dpll_param(void);
+ extern dpll_param *get_per_dpll_param(void);
+ 
++extern dpll_param *get_36x_mpu_dpll_param(void);
++extern dpll_param *get_36x_iva_dpll_param(void);
++extern dpll_param *get_36x_core_dpll_param(void);
++extern dpll_param *get_36x_per_dpll_param(void);
++
+ extern void *_end_vect, *_start;
+ 
+ #endif
+diff --git a/include/asm-arm/arch-omap3/clocks_omap3.h b/include/asm-arm/arch-omap3/clocks_omap3.h
+index 661407b..30ef690 100644
+--- a/include/asm-arm/arch-omap3/clocks_omap3.h
++++ b/include/asm-arm/arch-omap3/clocks_omap3.h
+@@ -282,4 +282,31 @@
+ #define PER_FSEL_38P4		0x07
+ #define PER_M2_38P4		0x09
+ 
++/* 36XX PER DPLL */
++
++#define PER_36XX_M_12		0x1B0
++#define PER_36XX_N_12		0x05
++#define PER_36XX_FSEL_12	0x07
++#define PER_36XX_M2_12		0x09
++
++#define PER_36XX_M_13		0x360
++#define PER_36XX_N_13		0x0C
++#define PER_36XX_FSEL_13	0x03
++#define PER_36XX_M2_13		0x09
++
++#define PER_36XX_M_19P2		0x1C2
++#define PER_36XX_N_19P2		0x09
++#define PER_36XX_FSEL_19P2	0x07
++#define PER_36XX_M2_19P2	0x09
++
++#define PER_36XX_M_26		0x1B0
++#define PER_36XX_N_26		0x0C
++#define PER_36XX_FSEL_26	0x07
++#define PER_36XX_M2_26		0x09
++
++#define PER_36XX_M_38P4		0x1C2
++#define PER_36XX_N_38P4		0x13
++#define PER_36XX_FSEL_38P4	0x07
++#define PER_36XX_M2_38P4	0x09
++
+ #endif	/* endif _CLOCKS_OMAP3_H_ */
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0020-OMAP3-beagle-add-support-for-Beagle-xM.patch b/recipes-bsp/u-boot/u-boot/0020-OMAP3-beagle-add-support-for-Beagle-xM.patch
new file mode 100644
index 0000000..e6ae0dc
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0020-OMAP3-beagle-add-support-for-Beagle-xM.patch
@@ -0,0 +1,137 @@
+From 27c6c30dbb5de0c0ed30ceaf69bb0e9f12149c03 Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Tue, 23 Mar 2010 09:21:49 -0700
+Subject: [PATCH 20/37] OMAP3: beagle: add support for Beagle xM
+
+---
+ board/ti/beagle/beagle.c       |   23 +++++++++++++++--------
+ board/ti/beagle/beagle.h       |   34 ++++++++++++++++++++++++++++++----
+ include/configs/omap3_beagle.h |    1 +
+ 3 files changed, 46 insertions(+), 12 deletions(-)
+
+diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
+index b4ea7e6..d357588 100644
+--- a/board/ti/beagle/beagle.c
++++ b/board/ti/beagle/beagle.c
+@@ -75,7 +75,7 @@ int beagle_get_revision(void)
+  *		GPIO173, GPIO172, GPIO171: 1 1 1 => Ax/Bx
+  *		GPIO173, GPIO172, GPIO171: 1 1 0 => C1/2/3
+  *		GPIO173, GPIO172, GPIO171: 1 0 1 => C4
+- *		GPIO173, GPIO172, GPIO171: 0 0 0 => D
++ *		GPIO173, GPIO172, GPIO171: 0 0 0 => XM
+  */
+ void beagle_identify(void)
+ {
+@@ -108,29 +108,36 @@ int misc_init_r(void)
+ 	twl4030_power_init();
+ 	twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
+ 
+-	printf("Board revision ");
+ 	switch (beagle_revision) {
+ 	case REVISION_AXBX:
+-		printf("Ax/Bx\n");
++		printf("Beagle Rev Ax/Bx\n");
+ 		break;
+ 	case REVISION_CX:
+-		printf("C1/C2/C3\n");
++		printf("Beagle Rev C1/C2/C3\n");
+ 		MUX_BEAGLE_C();
+ 		break;
+ 	case REVISION_C4:
+-		printf("C4\n");
++		printf("Beagle Rev C4\n");
+ 		MUX_BEAGLE_C();
+ 		/* Set VAUX2 to 1.8V for EHCI PHY */
+ 		twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
+ 					TWL4030_PM_RECEIVER_VAUX2_VSEL_18,
+ 					TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
+ 					TWL4030_PM_RECEIVER_DEV_GRP_P1);
++		setenv("mpurate", "720");
+ 		break;
+-	case REVISION_D:
+-		printf("D\n");
++	case REVISION_XM:
++		printf("Beagle xM Rev A\n");
++		MUX_BEAGLE_XM();
++		/* Set VAUX2 to 1.8V for EHCI PHY */
++		twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
++					TWL4030_PM_RECEIVER_VAUX2_VSEL_18,
++					TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
++					TWL4030_PM_RECEIVER_DEV_GRP_P1);
++		setenv("mpurate", "720");
+ 		break;
+ 	default:
+-		printf("unknown 0x%02x\n", beagle_revision);
++		printf("Beagle unknown 0x%02x\n", beagle_revision);
+ 	}
+ 
+ 	/* Configure GPIOs to output */
+diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h
+index d95fd78..fd06d46 100644
+--- a/board/ti/beagle/beagle.h
++++ b/board/ti/beagle/beagle.h
+@@ -38,7 +38,7 @@ const omap3_sysinfo sysinfo = {
+ #define REVISION_AXBX	0x7
+ #define REVISION_CX	0x6
+ #define REVISION_C4	0x5
+-#define REVISION_D	0x0
++#define REVISION_XM	0x0
+ 
+ /*
+  * IEN  - Input Enable
+@@ -379,11 +379,37 @@ const omap3_sysinfo sysinfo = {
+ 	MUX_VAL(CP(SDRC_CKE1),		(IDIS | PTU | EN  | M0)) /*sdrc_cke1*/
+ 
+ #define MUX_BEAGLE_C() \
+-	MUX_VAL(CP(MCBSP3_DX),		(IEN | PTD | DIS | M4)) /*GPIO_140*/\
+-	MUX_VAL(CP(MCBSP3_DR),		(IEN | PTD | DIS | M4)) /*GPIO_142*/\
+-	MUX_VAL(CP(MCBSP3_CLKX),	(IEN | PTD | DIS | M4)) /*GPIO_141*/\
++	MUX_VAL(CP(MCBSP3_DX),		(IEN  | PTD | DIS | M4)) /*GPIO_140*/\
++	MUX_VAL(CP(MCBSP3_DR),		(IEN  | PTD | DIS | M4)) /*GPIO_142*/\
++	MUX_VAL(CP(MCBSP3_CLKX),	(IEN  | PTD | DIS | M4)) /*GPIO_141*/\
+ 	MUX_VAL(CP(UART2_CTS),		(IEN  | PTU | EN  | M0)) /*UART2_CTS*/\
+ 	MUX_VAL(CP(UART2_RTS),		(IDIS | PTD | DIS | M0)) /*UART2_RTS*/\
+ 	MUX_VAL(CP(UART2_TX),		(IDIS | PTD | DIS | M0)) /*UART2_TX*/
+ 
++#define MUX_BEAGLE_XM() \
++	MUX_VAL(CP(MCBSP3_DX),		(IEN  | PTD | DIS | M4)) /*GPIO_140*/\
++	MUX_VAL(CP(MCBSP3_DR),		(IEN  | PTD | DIS | M4)) /*GPIO_142*/\
++	MUX_VAL(CP(MCBSP3_CLKX),	(IEN  | PTD | DIS | M4)) /*GPIO_141*/\
++	MUX_VAL(CP(UART2_CTS),		(IEN  | PTU | EN  | M0)) /*UART2_CTS*/\
++	MUX_VAL(CP(UART2_RTS),		(IDIS | PTD | DIS | M0)) /*UART2_RTS*/\
++	MUX_VAL(CP(UART2_TX),		(IDIS | PTD | DIS | M0)) /*UART2_TX*/\
++	MUX_VAL(CP(DSS_DATA0),		(IDIS | PTD | DIS | M7)) /*safe_mode*/\
++	MUX_VAL(CP(DSS_DATA1),		(IDIS | PTD | DIS | M7)) /*safe_mode*/\
++	MUX_VAL(CP(DSS_DATA2),		(IDIS | PTD | DIS | M7)) /*safe_mode*/\
++	MUX_VAL(CP(DSS_DATA3),		(IDIS | PTD | DIS | M7)) /*safe_mode*/\
++	MUX_VAL(CP(DSS_DATA4),		(IDIS | PTD | DIS | M7)) /*safe_mode*/\
++	MUX_VAL(CP(DSS_DATA5),		(IDIS | PTD | DIS | M7)) /*safe_mode*/\
++	MUX_VAL(CP(DSS_DATA18),		(IDIS | PTD | DIS | M3)) /*DSS_DATA0*/\
++	MUX_VAL(CP(DSS_DATA19),		(IDIS | PTD | DIS | M3)) /*DSS_DATA1*/\
++	MUX_VAL(CP(DSS_DATA20),		(IDIS | PTD | DIS | M3)) /*DSS_DATA2*/\
++	MUX_VAL(CP(DSS_DATA21),		(IDIS | PTD | DIS | M3)) /*DSS_DATA3*/\
++	MUX_VAL(CP(DSS_DATA22),		(IDIS | PTD | DIS | M3)) /*DSS_DATA4*/\
++	MUX_VAL(CP(DSS_DATA23),		(IDIS | PTD | DIS | M3)) /*DSS_DATA5*/\
++	MUX_VAL(CP(SYS_BOOT0),		(IDIS | PTD | DIS | M3)) /*DSS_DATA18*/\
++	MUX_VAL(CP(SYS_BOOT1),		(IDIS | PTD | DIS | M3)) /*DSS_DATA19*/\
++	MUX_VAL(CP(SYS_BOOT3),		(IDIS | PTD | DIS | M3)) /*DSS_DATA20*/\
++	MUX_VAL(CP(SYS_BOOT4),		(IDIS | PTD | DIS | M3)) /*DSS_DATA21*/\
++	MUX_VAL(CP(SYS_BOOT5),		(IDIS | PTD | DIS | M3)) /*DSS_DATA22*/\
++	MUX_VAL(CP(SYS_BOOT6),		(IDIS | PTD | DIS | M3)) /*DSS_DATA23*/ 
++
+ #endif
+diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
+index ce347cd..bba36df 100644
+--- a/include/configs/omap3_beagle.h
++++ b/include/configs/omap3_beagle.h
+@@ -157,6 +157,7 @@
+ /*
+  * Board NAND Info.
+  */
++#define CONFIG_SYS_NAND_QUIET_TEST	1
+ #define CONFIG_NAND_OMAP_GPMC
+ #define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
+ 							/* to access nand */
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0021-OMAP3-Beagle-Overo-remove-omapfb.debug-y-from-defaul.patch b/recipes-bsp/u-boot/u-boot/0021-OMAP3-Beagle-Overo-remove-omapfb.debug-y-from-defaul.patch
new file mode 100644
index 0000000..01aedc8
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0021-OMAP3-Beagle-Overo-remove-omapfb.debug-y-from-defaul.patch
@@ -0,0 +1,53 @@
+From e26b222adeea78777a89e9b0d0aefed67cde7d55 Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Thu, 25 Mar 2010 06:54:47 -0700
+Subject: [PATCH 21/37] OMAP3: Beagle, Overo: remove omapfb.debug=y from default env
+
+---
+ include/configs/omap3_beagle.h |    2 --
+ include/configs/omap3_overo.h  |    2 --
+ 2 files changed, 0 insertions(+), 4 deletions(-)
+
+diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
+index bba36df..c156cea 100644
+--- a/include/configs/omap3_beagle.h
++++ b/include/configs/omap3_beagle.h
+@@ -195,7 +195,6 @@
+ 		"mpurate=${mpurate} " \
+ 		"vram=${vram} " \
+ 		"omapfb.mode=dvi:${dvimode} " \
+-		"omapfb.debug=y " \
+ 		"omapdss.def_disp=${defaultdisplay} " \
+ 		"root=${mmcroot} " \
+ 		"rootfstype=${mmcrootfstype}\0" \
+@@ -203,7 +202,6 @@
+ 		"mpurate=${mpurate} " \
+ 		"vram=${vram} " \
+ 		"omapfb.mode=dvi:${dvimode} " \
+-		"omapfb.debug=y " \
+ 		"omapdss.def_disp=${defaultdisplay} " \
+ 		"root=${nandroot} " \
+ 		"rootfstype=${nandrootfstype}\0" \
+diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
+index fdbeb67..418e2ea 100644
+--- a/include/configs/omap3_overo.h
++++ b/include/configs/omap3_overo.h
+@@ -164,7 +164,6 @@
+ 		"mpurate=${mpurate} " \
+ 		"vram=${vram} " \
+ 		"omapfb.mode=dvi:${dvimode} " \
+-		"omapfb.debug=y " \
+ 		"omapdss.def_disp=${defaultdisplay} " \
+ 		"root=${mmcroot} " \
+ 		"rootfstype=${mmcrootfstype}\0" \
+@@ -172,7 +171,6 @@
+ 		"mpurate=${mpurate} " \
+ 		"vram=${vram} " \
+ 		"omapfb.mode=dvi:${dvimode} " \
+-		"omapfb.debug=y " \
+ 		"omapdss.def_disp=${defaultdisplay} " \
+ 		"root=${nandroot} " \
+ 		"rootfstype=${nandrootfstype}\0" \
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0022-OMAP3-beagle-implement-expansionboard-detection-base.patch b/recipes-bsp/u-boot/u-boot/0022-OMAP3-beagle-implement-expansionboard-detection-base.patch
new file mode 100644
index 0000000..91d09ab
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0022-OMAP3-beagle-implement-expansionboard-detection-base.patch
@@ -0,0 +1,157 @@
+From 851d35fab7f93400a1d714524b5e986206d9b0c4 Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@dominion.thruhere.net>
+Date: Thu, 25 Mar 2010 16:07:23 +0100
+Subject: [PATCH 22/37] OMAP3: beagle: implement expansionboard detection based on board/overo.c code
+
+---
+ board/ti/beagle/beagle.c |   78 ++++++++++++++++++++++++++++++++++++++++++++++
+ board/ti/beagle/beagle.h |   25 +++++++++++++-
+ 2 files changed, 101 insertions(+), 2 deletions(-)
+
+diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
+index d357588..8c5b88c 100644
+--- a/board/ti/beagle/beagle.c
++++ b/board/ti/beagle/beagle.c
+@@ -38,6 +38,31 @@
+ #include <asm/mach-types.h>
+ #include "beagle.h"
+ 
++static struct {
++	unsigned int device_vendor;
++	unsigned char revision;
++	unsigned char content;
++	unsigned char fab_revision[8];
++	unsigned char env_var[16];
++	unsigned char env_setting[64];
++} expansion_config;
++
++#define TWL4030_I2C_BUS			0
++
++#define EXPANSION_EEPROM_I2C_BUS	1
++#define EXPANSION_EEPROM_I2C_ADDRESS	0x50
++
++#define TINCANTOOLS_VENDORID	0x0100
++#define GUMSTIX_VENDORID		0x0200
++#define SPECIALCOMP_VENDORID	0x0300
++
++#define TINCANTOOLS_ZIPPY		0x01000100
++#define TINCANTOOLS_ZIPPY2		0x02000100
++#define TINCANTOOLS_TRAINER		0x03000100
++#define TINCANTOOLS_SHOWDOG		0x04000100
++
++#define BEAGLE_NO_EEPROM		0xffffffff
++
+ static int beagle_revision;
+ 
+ /*
+@@ -95,6 +120,27 @@ void beagle_identify(void)
+ }
+ 
+ /*
++ * Routine: get_expansion_id
++ * Description: This function checks for expansion board by checking I2C
++ *		bus 2 for the availability of an AT24C01B serial EEPROM.
++ *		returns the device_vendor field from the EEPROM
++ */
++unsigned int get_expansion_id(void)
++{
++	i2c_set_bus_num(EXPANSION_EEPROM_I2C_BUS);
++
++	/* return BEAGLE_NO_EEPROM if eeprom doesn't respond */
++	if (i2c_probe(EXPANSION_EEPROM_I2C_ADDRESS) == 1)
++		return BEAGLE_NO_EEPROM;
++
++	/* read configuration data */
++	i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 1, (u8 *)&expansion_config,
++		 sizeof(expansion_config));
++
++	return expansion_config.device_vendor;
++}
++
++/*
+  * Routine: misc_init_r
+  * Description: Configure board specific parts
+  */
+@@ -104,6 +150,38 @@ int misc_init_r(void)
+ 	struct gpio *gpio6_base = (struct gpio *)OMAP34XX_GPIO6_BASE;
+ 
+ 	beagle_identify();
++	switch (get_expansion_id()) {
++		case TINCANTOOLS_ZIPPY:
++			printf("Recognized Tincantools Zippy expansion board (rev %d %s)\n",
++				expansion_config.revision, expansion_config.fab_revision);
++			MUX_TINCANTOOLS_ZIPPY();
++			break;
++		case TINCANTOOLS_ZIPPY2:
++			printf("Recognized Tincantools Zippy2 expansion board (rev %d %s)\n",
++				expansion_config.revision, expansion_config.fab_revision);
++			MUX_TINCANTOOLS_ZIPPY();
++			break;
++		case TINCANTOOLS_TRAINER:
++			printf("Recognized Tincantools Trainer expansion board (rev %d %s)\n",
++				expansion_config.revision, expansion_config.fab_revision);
++			break;
++		case TINCANTOOLS_SHOWDOG:
++			printf("Recognized Tincantools Showdow expansion board (rev %d %s)\n",
++				expansion_config.revision, expansion_config.fab_revision);
++			/* Place holder for DSS2 definition for showdog lcd */
++			setenv("defaultdisplay", "showdoglcd");
++			break;
++		case BEAGLE_NO_EEPROM:
++			printf("No EEPROM on expansion board\n");
++			break;
++		default:
++			printf("Unrecognized expansion board: %x\n", expansion_config.device_vendor);
++	}
++
++	if (expansion_config.content == 1)
++		setenv(expansion_config.env_var, expansion_config.env_setting);
++
++	i2c_set_bus_num(TWL4030_I2C_BUS);
+ 
+ 	twl4030_power_init();
+ 	twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
+diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h
+index fd06d46..ec4f831 100644
+--- a/board/ti/beagle/beagle.h
++++ b/board/ti/beagle/beagle.h
+@@ -260,8 +260,8 @@ const omap3_sysinfo sysinfo = {
+ 	MUX_VAL(CP(HSUSB0_DATA7),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA7*/\
+ 	MUX_VAL(CP(I2C1_SCL),		(IEN  | PTU | EN  | M0)) /*I2C1_SCL*/\
+ 	MUX_VAL(CP(I2C1_SDA),		(IEN  | PTU | EN  | M0)) /*I2C1_SDA*/\
+-	MUX_VAL(CP(I2C2_SCL),		(IEN  | PTU | EN  | M4)) /*GPIO_168*/\
+-	MUX_VAL(CP(I2C2_SDA),		(IEN  | PTU | EN  | M4)) /*GPIO_183*/\
++	MUX_VAL(CP(I2C2_SCL),       (IEN  | PTU | EN  | M0)) /*I2C2_SCL*/\
++	MUX_VAL(CP(I2C2_SDA),       (IEN  | PTU | EN  | M0)) /*I2C2_SDA*/\
+ 	MUX_VAL(CP(I2C3_SCL),		(IEN  | PTU | EN  | M0)) /*I2C3_SCL*/\
+ 	MUX_VAL(CP(I2C3_SDA),		(IEN  | PTU | EN  | M0)) /*I2C3_SDA*/\
+ 	MUX_VAL(CP(I2C4_SCL),		(IEN  | PTU | EN  | M0)) /*I2C4_SCL*/\
+@@ -412,4 +412,25 @@ const omap3_sysinfo sysinfo = {
+ 	MUX_VAL(CP(SYS_BOOT5),		(IDIS | PTD | DIS | M3)) /*DSS_DATA22*/\
+ 	MUX_VAL(CP(SYS_BOOT6),		(IDIS | PTD | DIS | M3)) /*DSS_DATA23*/ 
+ 
++#define MUX_TINCANTOOLS_ZIPPY() \
++	MUX_VAL(CP(MMC2_CLK),       (IEN  | PTU | EN  | M0)) /*MMC2_CLK*/\
++	MUX_VAL(CP(MMC2_CMD),       (IEN  | PTU | EN  | M0)) /*MMC2_CMD*/\
++	MUX_VAL(CP(MMC2_DAT0),      (IEN  | PTU | EN  | M0)) /*MMC2_DAT0*/\
++	MUX_VAL(CP(MMC2_DAT1),      (IEN  | PTU | EN  | M0)) /*MMC2_DAT1*/\
++	MUX_VAL(CP(MMC2_DAT2),      (IEN  | PTU | EN  | M0)) /*MMC2_DAT2*/\
++	MUX_VAL(CP(MMC2_DAT3),      (IEN  | PTU | EN  | M0)) /*MMC2_DAT3*/\
++	MUX_VAL(CP(MMC2_DAT4),      (IEN  | PTU | EN  | M1)) /*MMC2_DIR_DAT0*/\
++	MUX_VAL(CP(MMC2_DAT5),      (IEN  | PTU | EN  | M1)) /*MMC2_DIR_DAT1*/\
++	MUX_VAL(CP(MMC2_DAT6),      (IEN  | PTU | EN  | M1)) /*MMC2_DIR_CMD*/\
++	MUX_VAL(CP(MMC2_DAT7),      (IEN  | PTU | EN  | M1)) /*MMC2_CLKIN*/\
++	MUX_VAL(CP(MCBSP1_CLKR),    (IEN  | PTU | EN  | M1)) /*MCSPI4_CLK*/\
++	MUX_VAL(CP(MCBSP1_FSR),     (IEN  | PTU | EN  | M4)) /*GPIO_157*/\
++	MUX_VAL(CP(MCBSP1_DX),      (IEN  | PTD | EN  | M1)) /*MCSPI4_SIMO*/\
++	MUX_VAL(CP(MCBSP1_DR),      (IEN  | PTD | DIS | M1)) /*MCSPI4_SOMI*/\
++	MUX_VAL(CP(MCBSP1_FSX),     (IEN  | PTD | EN  | M1)) /*MCSPI4_CS0*/\
++	MUX_VAL(CP(MCBSP1_CLKX),    (IEN  | PTD | DIS | M4)) /*GPIO_162*/\
++	MUX_VAL(CP(MCBSP3_DX),      (IEN  | PTD | DIS | M4)) /*GPIO_140*/\
++	MUX_VAL(CP(MCBSP3_DR),      (IEN  | PTD | DIS | M4)) /*GPIO_142*/\
++	MUX_VAL(CP(MCBSP3_CLKX),    (IEN  | PTD | DIS | M4)) /*GPIO_141*/\
++
+ #endif
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0023-beagleboard-display-message-about-I2C-errors-being-e.patch b/recipes-bsp/u-boot/u-boot/0023-beagleboard-display-message-about-I2C-errors-being-e.patch
new file mode 100644
index 0000000..d7ac713
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0023-beagleboard-display-message-about-I2C-errors-being-e.patch
@@ -0,0 +1,26 @@
+From 4b07f3a9f045453e5e7b5950e721ed35d9bd308a Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@dominion.thruhere.net>
+Date: Wed, 31 Mar 2010 14:24:25 +0200
+Subject: [PATCH 23/37] beagleboard: display message about I2C errors being expected when no expansion boards are present
+
+---
+ board/ti/beagle/beagle.c |    3 +++
+ 1 files changed, 3 insertions(+), 0 deletions(-)
+
+diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
+index 8c5b88c..c9c9a58 100644
+--- a/board/ti/beagle/beagle.c
++++ b/board/ti/beagle/beagle.c
+@@ -150,6 +150,9 @@ int misc_init_r(void)
+ 	struct gpio *gpio6_base = (struct gpio *)OMAP34XX_GPIO6_BASE;
+ 
+ 	beagle_identify();
++
++	printf("\nProbing for expansion boards, if none are connected you'll see a harmless I2C error.\n");
++
+ 	switch (get_expansion_id()) {
+ 		case TINCANTOOLS_ZIPPY:
+ 			printf("Recognized Tincantools Zippy expansion board (rev %d %s)\n",
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0024-beagleboard-fix-TCT-expansionboard-IDs.patch b/recipes-bsp/u-boot/u-boot/0024-beagleboard-fix-TCT-expansionboard-IDs.patch
new file mode 100644
index 0000000..dc5e69a
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0024-beagleboard-fix-TCT-expansionboard-IDs.patch
@@ -0,0 +1,27 @@
+From a4fa85edf5ff6aa6a06f437acc8694dd866f6618 Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@dominion.thruhere.net>
+Date: Sun, 11 Apr 2010 12:14:43 +0200
+Subject: [PATCH 24/37] beagleboard: fix TCT expansionboard IDs
+
+---
+ board/ti/beagle/beagle.c |    4 ++--
+ 1 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
+index c9c9a58..7cb6d1f 100644
+--- a/board/ti/beagle/beagle.c
++++ b/board/ti/beagle/beagle.c
+@@ -58,8 +58,8 @@ static struct {
+ 
+ #define TINCANTOOLS_ZIPPY		0x01000100
+ #define TINCANTOOLS_ZIPPY2		0x02000100
+-#define TINCANTOOLS_TRAINER		0x03000100
+-#define TINCANTOOLS_SHOWDOG		0x04000100
++#define TINCANTOOLS_TRAINER		0x04000100
++#define TINCANTOOLS_SHOWDOG		0x03000100
+ 
+ #define BEAGLE_NO_EEPROM		0xffffffff
+ 
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0025-Add-DSS-driver-for-OMAP3.patch b/recipes-bsp/u-boot/u-boot/0025-Add-DSS-driver-for-OMAP3.patch
new file mode 100644
index 0000000..da517b2
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0025-Add-DSS-driver-for-OMAP3.patch
@@ -0,0 +1,353 @@
+From 10bffe78f0ef6cb450ecea717dce8d636982bc86 Mon Sep 17 00:00:00 2001
+From: Syed Mohammed Khasim <khasim@ti.com>
+Date: Tue, 12 Jan 2010 23:57:28 +0530
+Subject: [PATCH 25/37] Add DSS driver for OMAP3
+
+Supports dynamic panel configuration
+Supports dynamic tv standard selection
+Adds support for DSS register access through generic APIs
+
+Incorporated DSS register access using structures.
+
+Previous discussions are here
+http://www.mail-archive.com/u-boot@lists.denx.de/msg27150.html
+
+Signed-off-by: Syed Mohammed Khasim <khasim@ti.com>
+---
+ drivers/video/Makefile           |    1 +
+ drivers/video/omap3_dss.c        |  130 ++++++++++++++++++++++++++++
+ include/asm-arm/arch-omap3/dss.h |  173 ++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 304 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/video/omap3_dss.c
+ create mode 100644 include/asm-arm/arch-omap3/dss.h
+
+diff --git a/drivers/video/Makefile b/drivers/video/Makefile
+index a5e339a..44d7ae8 100644
+--- a/drivers/video/Makefile
++++ b/drivers/video/Makefile
+@@ -38,6 +38,7 @@ COBJS-$(CONFIG_SED156X) += sed156x.o
+ COBJS-$(CONFIG_VIDEO_SM501) += sm501.o
+ COBJS-$(CONFIG_VIDEO_SMI_LYNXEM) += smiLynxEM.o
+ COBJS-$(CONFIG_VIDEO_VCXK) += bus_vcxk.o
++COBJS-$(CONFIG_VIDEO_OMAP3) += omap3_dss.o
+ COBJS-y += videomodes.o
+ 
+ COBJS	:= $(COBJS-y)
+diff --git a/drivers/video/omap3_dss.c b/drivers/video/omap3_dss.c
+new file mode 100644
+index 0000000..69c705a
+--- /dev/null
++++ b/drivers/video/omap3_dss.c
+@@ -0,0 +1,130 @@
++/*
++ * (C) Copyright 2010
++ * Texas Instruments, <www.ti.com>
++ * Syed Mohammed Khasim <khasim@ti.com>
++ *
++ * Referred to Linux DSS driver files for OMAP3
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation's version 2 of
++ * the License.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <common.h>
++#include <asm/io.h>
++#include <asm/arch/dss.h>
++
++/*
++ * Configure VENC for a given Mode (NTSC / PAL)
++ */
++void omap3_dss_venc_config(const struct venc_regs *venc_cfg,
++				u32 height, u32 width)
++{
++	struct venc_regs *venc = (struct venc_regs *) OMAP3_VENC_BASE;
++	struct dss_regs *dss = (struct dss_regs *) OMAP3_DSS_BASE;
++	struct dispc_regs *dispc = (struct dispc_regs *) OMAP3_DISPC_BASE;
++
++	writel(venc_cfg->status, &venc->status);
++	writel(venc_cfg->f_control, &venc->f_control);
++	writel(venc_cfg->vidout_ctrl, &venc->vidout_ctrl);
++	writel(venc_cfg->sync_ctrl, &venc->sync_ctrl);
++	writel(venc_cfg->llen, &venc->llen);
++	writel(venc_cfg->flens, &venc->flens);
++	writel(venc_cfg->hfltr_ctrl, &venc->hfltr_ctrl);
++	writel(venc_cfg->cc_carr_wss_carr, &venc->cc_carr_wss_carr);
++	writel(venc_cfg->c_phase, &venc->c_phase);
++	writel(venc_cfg->gain_u, &venc->gain_u);
++	writel(venc_cfg->gain_v, &venc->gain_v);
++	writel(venc_cfg->gain_y, &venc->gain_y);
++	writel(venc_cfg->black_level, &venc->black_level);
++	writel(venc_cfg->blank_level, &venc->blank_level);
++	writel(venc_cfg->x_color, &venc->x_color);
++	writel(venc_cfg->m_control, &venc->m_control);
++	writel(venc_cfg->bstamp_wss_data, &venc->bstamp_wss_data);
++	writel(venc_cfg->s_carr, &venc->s_carr);
++	writel(venc_cfg->line21, &venc->line21);
++	writel(venc_cfg->ln_sel, &venc->ln_sel);
++	writel(venc_cfg->l21__wc_ctl, &venc->l21__wc_ctl);
++	writel(venc_cfg->htrigger_vtrigger, &venc->htrigger_vtrigger);
++	writel(venc_cfg->savid__eavid, &venc->savid__eavid);
++	writel(venc_cfg->flen__fal, &venc->flen__fal);
++	writel(venc_cfg->lal__phase_reset, &venc->lal__phase_reset);
++	writel(venc_cfg->hs_int_start_stop_x,
++				&venc->hs_int_start_stop_x);
++	writel(venc_cfg->hs_ext_start_stop_x,
++				&venc->hs_ext_start_stop_x);
++	writel(venc_cfg->vs_int_start_x, &venc->vs_int_start_x);
++	writel(venc_cfg->vs_int_stop_x__vs_int_start_y,
++			&venc->vs_int_stop_x__vs_int_start_y);
++	writel(venc_cfg->vs_int_stop_y__vs_ext_start_x,
++			&venc->vs_int_stop_y__vs_ext_start_x);
++	writel(venc_cfg->vs_ext_stop_x__vs_ext_start_y,
++			&venc->vs_ext_stop_x__vs_ext_start_y);
++	writel(venc_cfg->vs_ext_stop_y, &venc->vs_ext_stop_y);
++	writel(venc_cfg->avid_start_stop_x, &venc->avid_start_stop_x);
++	writel(venc_cfg->avid_start_stop_y, &venc->avid_start_stop_y);
++	writel(venc_cfg->fid_int_start_x__fid_int_start_y,
++				&venc->fid_int_start_x__fid_int_start_y);
++	writel(venc_cfg->fid_int_offset_y__fid_ext_start_x,
++				&venc->fid_int_offset_y__fid_ext_start_x);
++	writel(venc_cfg->fid_ext_start_y__fid_ext_offset_y,
++				&venc->fid_ext_start_y__fid_ext_offset_y);
++	writel(venc_cfg->tvdetgp_int_start_stop_x,
++				&venc->tvdetgp_int_start_stop_x);
++	writel(venc_cfg->tvdetgp_int_start_stop_y,
++				&venc->tvdetgp_int_start_stop_y);
++	writel(venc_cfg->gen_ctrl, &venc->gen_ctrl);
++	writel(venc_cfg->output_control, &venc->output_control);
++	writel(venc_cfg->dac_b__dac_c, &venc->dac_b__dac_c);
++
++	/* Configure DSS for VENC Settings */
++	writel(VENC_DSS_CONFIG, &dss->control);
++
++	/* Configure height and width for Digital out */
++	writel(((height << DIG_LPP_SHIFT) | width), &dispc->size_dig);
++}
++
++/*
++ * Configure Panel Specific Parameters
++ */
++void omap3_dss_panel_config(const struct panel_config *panel_cfg)
++{
++	struct dispc_regs *dispc = (struct dispc_regs *) OMAP3_DISPC_BASE;
++
++	writel(panel_cfg->timing_h, &dispc->timing_h);
++	writel(panel_cfg->timing_v, &dispc->timing_v);
++	writel(panel_cfg->pol_freq, &dispc->pol_freq);
++	writel(panel_cfg->divisor, &dispc->divisor);
++	writel(panel_cfg->lcd_size, &dispc->size_lcd);
++	writel((panel_cfg->load_mode << FRAME_MODE_SHIFT), &dispc->config);
++	writel(((panel_cfg->panel_type << TFTSTN_SHIFT) |
++		(panel_cfg->data_lines << DATALINES_SHIFT)), &dispc->control);
++	writel(panel_cfg->panel_color, &dispc->default_color0);
++}
++
++/*
++ * Enable LCD and DIGITAL OUT in DSS
++ */
++void omap3_dss_enable(void)
++{
++	struct dispc_regs *dispc = (struct dispc_regs *) OMAP3_DISPC_BASE;
++	u32 l = 0;
++
++	l = readl(&dispc->control);
++	l |= DISPC_ENABLE;
++	writel(l, &dispc->control);
++}
+diff --git a/include/asm-arm/arch-omap3/dss.h b/include/asm-arm/arch-omap3/dss.h
+new file mode 100644
+index 0000000..e5e3b0d
+--- /dev/null
++++ b/include/asm-arm/arch-omap3/dss.h
+@@ -0,0 +1,173 @@
++/*
++ * (C) Copyright 2010
++ * Texas Instruments, <www.ti.com>
++ * Syed Mohammed Khasim <khasim@ti.com>
++ *
++ * Referred to Linux DSS driver files for OMAP3
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation's version 2 of
++ * the License.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#ifndef DSS_H
++#define DSS_H
++
++/*
++ * DSS Base Registers
++ */
++#define OMAP3_DSS_BASE		0x48050040
++#define OMAP3_DISPC_BASE	0x48050440
++#define OMAP3_VENC_BASE		0x48050C00
++
++/* DSS Registers */
++struct dss_regs {
++	u32 control;				/* 0x40 */
++	u32 sdi_control;			/* 0x44 */
++	u32 pll_control;			/* 0x48 */
++};
++
++/* DISPC Registers */
++struct dispc_regs {
++	u32 control;				/* 0x40 */
++	u32 config;				/* 0x44 */
++	u32 reserve_2;				/* 0x48 */
++	u32 default_color0;			/* 0x4C */
++	u32 default_color1;			/* 0x50 */
++	u32 trans_color0;			/* 0x54 */
++	u32 trans_color1;			/* 0x58 */
++	u32 line_status;			/* 0x5C */
++	u32 line_number;			/* 0x60 */
++	u32 timing_h;				/* 0x64 */
++	u32 timing_v;				/* 0x68 */
++	u32 pol_freq;				/* 0x6C */
++	u32 divisor;				/* 0x70 */
++	u32 global_alpha;			/* 0x74 */
++	u32 size_dig;				/* 0x78 */
++	u32 size_lcd;				/* 0x7C */
++};
++
++/* VENC Registers */
++struct venc_regs {
++	u32 rev_id;				/* 0x00 */
++	u32 status;				/* 0x04 */
++	u32 f_control;				/* 0x08 */
++	u32 reserve_1;				/* 0x0C */
++	u32 vidout_ctrl;			/* 0x10 */
++	u32 sync_ctrl;				/* 0x14 */
++	u32 reserve_2;				/* 0x18 */
++	u32 llen;				/* 0x1C */
++	u32 flens;				/* 0x20 */
++	u32 hfltr_ctrl;				/* 0x24 */
++	u32 cc_carr_wss_carr;			/* 0x28 */
++	u32 c_phase;				/* 0x2C */
++	u32 gain_u;				/* 0x30 */
++	u32 gain_v;				/* 0x34 */
++	u32 gain_y;				/* 0x38 */
++	u32 black_level;			/* 0x3C */
++	u32 blank_level;			/* 0x40 */
++	u32 x_color;				/* 0x44 */
++	u32 m_control;				/* 0x48 */
++	u32 bstamp_wss_data;			/* 0x4C */
++	u32 s_carr;				/* 0x50 */
++	u32 line21;				/* 0x54 */
++	u32 ln_sel;				/* 0x58 */
++	u32 l21__wc_ctl;			/* 0x5C */
++	u32 htrigger_vtrigger;			/* 0x60 */
++	u32 savid__eavid;			/* 0x64 */
++	u32 flen__fal;				/* 0x68 */
++	u32 lal__phase_reset;			/* 0x6C */
++	u32 hs_int_start_stop_x;		/* 0x70 */
++	u32 hs_ext_start_stop_x;		/* 0x74 */
++	u32 vs_int_start_x;			/* 0x78 */
++	u32 vs_int_stop_x__vs_int_start_y;	/* 0x7C */
++	u32 vs_int_stop_y__vs_ext_start_x;	/* 0x80 */
++	u32 vs_ext_stop_x__vs_ext_start_y;	/* 0x84 */
++	u32 vs_ext_stop_y;			/* 0x88 */
++	u32 reserve_3;				/* 0x8C */
++	u32 avid_start_stop_x;			/* 0x90 */
++	u32 avid_start_stop_y;			/* 0x94 */
++	u32 reserve_4;				/* 0x98 */
++	u32 reserve_5;				/* 0x9C */
++	u32 fid_int_start_x__fid_int_start_y;	/* 0xA0 */
++	u32 fid_int_offset_y__fid_ext_start_x;	/* 0xA4 */
++	u32 fid_ext_start_y__fid_ext_offset_y;	/* 0xA8 */
++	u32 reserve_6;				/* 0xAC */
++	u32 tvdetgp_int_start_stop_x;		/* 0xB0 */
++	u32 tvdetgp_int_start_stop_y;		/* 0xB4 */
++	u32 gen_ctrl;				/* 0xB8 */
++	u32 reserve_7;				/* 0xBC */
++	u32 reserve_8;				/* 0xC0 */
++	u32 output_control;			/* 0xC4 */
++	u32 dac_b__dac_c;			/* 0xC8 */
++	u32 height_width;			/* 0xCC */
++};
++
++/* Few Register Offsets */
++#define FRAME_MODE_SHIFT			1
++#define TFTSTN_SHIFT				3
++#define DATALINES_SHIFT				8
++
++/* Enabling Display controller */
++#define LCD_ENABLE				1
++#define DIG_ENABLE				(1 << 1)
++#define GO_LCD					(1 << 5)
++#define GO_DIG					(1 << 6)
++#define GP_OUT0					(1 << 15)
++#define GP_OUT1					(1 << 16)
++
++#define DISPC_ENABLE				(LCD_ENABLE | \
++						 DIG_ENABLE | \
++						 GO_LCD | \
++						 GO_DIG | \
++						 GP_OUT0| \
++						 GP_OUT1)
++
++/* Configure VENC DSS Params */
++#define VENC_CLK_ENABLE				(1 << 3)
++#define DAC_DEMEN				(1 << 4)
++#define DAC_POWERDN				(1 << 5)
++#define VENC_OUT_SEL				(1 << 6)
++#define DIG_LPP_SHIFT				16
++#define VENC_DSS_CONFIG				(VENC_CLK_ENABLE | \
++						 DAC_DEMEN | \
++						 DAC_POWERDN | \
++						 VENC_OUT_SEL)
++/*
++ * Panel Configuration
++ */
++struct panel_config {
++	u32 timing_h;
++	u32 timing_v;
++	u32 pol_freq;
++	u32 divisor;
++	u32 lcd_size;
++	u32 panel_type;
++	u32 data_lines;
++	u32 load_mode;
++	u32 panel_color;
++};
++
++/*
++ * Generic DSS Functions
++ */
++void omap3_dss_venc_config(const struct venc_regs *venc_cfg,
++			u32 height, u32 width);
++void omap3_dss_panel_config(const struct panel_config *panel_cfg);
++void omap3_dss_enable(void);
++
++#endif /* DSS_H */
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0026-Enable-DSS-driver-for-Beagle.patch b/recipes-bsp/u-boot/u-boot/0026-Enable-DSS-driver-for-Beagle.patch
new file mode 100644
index 0000000..7e7bea8
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0026-Enable-DSS-driver-for-Beagle.patch
@@ -0,0 +1,158 @@
+From a8adb8e29aba9d2c83731839063f1381fce3906c Mon Sep 17 00:00:00 2001
+From: Syed Mohammed Khasim <khasim@ti.com>
+Date: Sun, 11 Apr 2010 17:44:39 +0200
+Subject: [PATCH 26/37] Enable DSS driver for Beagle
+
+Configures DSS to display color bar on Svideo
+Configures DSS to display background color on DVID
+
+Signed-off-by: Syed Mohammed Khasim <khasim@ti.com>
+---
+ board/ti/beagle/beagle.c       |   12 ++++++
+ board/ti/beagle/beagle.h       |   75 ++++++++++++++++++++++++++++++++++++++++
+ include/configs/omap3_beagle.h |    1 +
+ 3 files changed, 88 insertions(+), 0 deletions(-)
+
+diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
+index 7cb6d1f..eb57b5a 100644
+--- a/board/ti/beagle/beagle.c
++++ b/board/ti/beagle/beagle.c
+@@ -141,6 +141,16 @@ unsigned int get_expansion_id(void)
+ }
+ 
+ /*
++ * Configure DSS to display background color on DVID
++ * Configure VENC to display color bar on S-Video
++ */
++void display_init(void)
++{
++	omap3_dss_venc_config(&venc_config_std_tv, VENC_HEIGHT, VENC_WIDTH);
++	omap3_dss_panel_config(&dvid_cfg);
++}
++
++/*
+  * Routine: misc_init_r
+  * Description: Configure board specific parts
+  */
+@@ -188,6 +198,7 @@ int misc_init_r(void)
+ 
+ 	twl4030_power_init();
+ 	twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
++	display_init();
+ 
+ 	switch (beagle_revision) {
+ 	case REVISION_AXBX:
+@@ -233,6 +244,7 @@ int misc_init_r(void)
+ 		GPIO15 | GPIO14 | GPIO13 | GPIO12, &gpio5_base->setdataout);
+ 
+ 	dieid_num_r();
++	omap3_dss_enable();
+ 
+ 	return 0;
+ }
+diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h
+index ec4f831..69f9398 100644
+--- a/board/ti/beagle/beagle.h
++++ b/board/ti/beagle/beagle.h
+@@ -23,6 +23,8 @@
+ #ifndef _BEAGLE_H_
+ #define _BEAGLE_H_
+ 
++#include <asm/arch/dss.h>
++
+ const omap3_sysinfo sysinfo = {
+ 	DDR_STACKED,
+ 	"OMAP3 Beagle board",
+@@ -433,4 +435,77 @@ const omap3_sysinfo sysinfo = {
+ 	MUX_VAL(CP(MCBSP3_DR),      (IEN  | PTD | DIS | M4)) /*GPIO_142*/\
+ 	MUX_VAL(CP(MCBSP3_CLKX),    (IEN  | PTD | DIS | M4)) /*GPIO_141*/\
+ 
++/*
++ * Display Configuration
++ */
++
++#define DVI_BEAGLE_ORANGE_COL		0x00FF8000
++#define VENC_HEIGHT			0x00ef
++#define VENC_WIDTH			0x027f
++
++/*
++ * Configure VENC in DSS for Beagle to generate Color Bar
++ *
++ * Kindly refer to OMAP TRM for definition of these values.
++ */
++static const struct venc_regs venc_config_std_tv = {
++	.status					= 0x0000001B,
++	.f_control				= 0x00000040,
++	.vidout_ctrl				= 0x00000000,
++	.sync_ctrl				= 0x00008000,
++	.llen					= 0x00008359,
++	.flens					= 0x0000020C,
++	.hfltr_ctrl				= 0x00000000,
++	.cc_carr_wss_carr			= 0x043F2631,
++	.c_phase				= 0x00000024,
++	.gain_u					= 0x00000130,
++	.gain_v					= 0x00000198,
++	.gain_y					= 0x000001C0,
++	.black_level				= 0x0000006A,
++	.blank_level				= 0x0000005C,
++	.x_color				= 0x00000000,
++	.m_control				= 0x00000001,
++	.bstamp_wss_data			= 0x0000003F,
++	.s_carr					= 0x21F07C1F,
++	.line21					= 0x00000000,
++	.ln_sel					= 0x00000015,
++	.l21__wc_ctl				= 0x00001400,
++	.htrigger_vtrigger			= 0x00000000,
++	.savid__eavid				= 0x069300F4,
++	.flen__fal				= 0x0016020C,
++	.lal__phase_reset			= 0x00060107,
++	.hs_int_start_stop_x			= 0x008D034E,
++	.hs_ext_start_stop_x			= 0x000F0359,
++	.vs_int_start_x				= 0x01A00000,
++	.vs_int_stop_x__vs_int_start_y		= 0x020501A0,
++	.vs_int_stop_y__vs_ext_start_x		= 0x01AC0024,
++	.vs_ext_stop_x__vs_ext_start_y		= 0x020D01AC,
++	.vs_ext_stop_y				= 0x00000006,
++	.avid_start_stop_x			= 0x03480079,
++	.avid_start_stop_y			= 0x02040024,
++	.fid_int_start_x__fid_int_start_y	= 0x0001008A,
++	.fid_int_offset_y__fid_ext_start_x	= 0x01AC0106,
++	.fid_ext_start_y__fid_ext_offset_y	= 0x01060006,
++	.tvdetgp_int_start_stop_x		= 0x00140001,
++	.tvdetgp_int_start_stop_y		= 0x00010001,
++	.gen_ctrl				= 0x00FF0000,
++	.output_control				= 0x0000000D,
++	.dac_b__dac_c				= 0x00000000
++};
++
++/*
++ * Configure Timings for DVI D
++ */
++static const struct panel_config dvid_cfg = {
++	.timing_h	= 0x0ff03f31, /* Horizantal timing */
++	.timing_v	= 0x01400504, /* Vertical timing */
++	.pol_freq	= 0x00007028, /* Pol Freq */
++	.divisor	= 0x00010006, /* 72Mhz Pixel Clock */
++	.lcd_size	= 0x02ff03ff, /* 1024x768 */
++	.panel_type	= 0x01, /* TFT */
++	.data_lines	= 0x03, /* 24 Bit RGB */
++	.load_mode	= 0x02, /* Frame Mode */
++	.panel_color	= DVI_BEAGLE_ORANGE_COL /* ORANGE */
++};
++
+ #endif
+diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
+index c156cea..7bcbe9b 100644
+--- a/include/configs/omap3_beagle.h
++++ b/include/configs/omap3_beagle.h
+@@ -131,6 +131,7 @@
+ #define CONFIG_CMD_I2C		/* I2C serial bus support	*/
+ #define CONFIG_CMD_MMC		/* MMC support			*/
+ #define CONFIG_CMD_NAND		/* NAND support			*/
++#define CONFIG_VIDEO_OMAP3	/* DSS Support			*/
+ 
+ #undef CONFIG_CMD_FLASH		/* flinfo, erase, protect	*/
+ #undef CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0027-beagleboardXM-don-t-set-mpurate-on-xM-in-bootargs.patch b/recipes-bsp/u-boot/u-boot/0027-beagleboardXM-don-t-set-mpurate-on-xM-in-bootargs.patch
new file mode 100644
index 0000000..90d71a8
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0027-beagleboardXM-don-t-set-mpurate-on-xM-in-bootargs.patch
@@ -0,0 +1,24 @@
+From 85d4ffbc3a12b28cae00fc88d4adba7df4907fe4 Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@dominion.thruhere.net>
+Date: Tue, 13 Apr 2010 22:04:07 +0200
+Subject: [PATCH 27/37] beagleboardXM: don't set mpurate on xM in bootargs
+
+---
+ board/ti/beagle/beagle.c |    1 -
+ 1 files changed, 0 insertions(+), 1 deletions(-)
+
+diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
+index eb57b5a..974a72c 100644
+--- a/board/ti/beagle/beagle.c
++++ b/board/ti/beagle/beagle.c
+@@ -226,7 +226,6 @@ int misc_init_r(void)
+ 					TWL4030_PM_RECEIVER_VAUX2_VSEL_18,
+ 					TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
+ 					TWL4030_PM_RECEIVER_DEV_GRP_P1);
+-		setenv("mpurate", "720");
+ 		break;
+ 	default:
+ 		printf("Beagle unknown 0x%02x\n", beagle_revision);
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0028-OMAP3-fix-and-clean-up-L2-cache-enable-disable-funct.patch b/recipes-bsp/u-boot/u-boot/0028-OMAP3-fix-and-clean-up-L2-cache-enable-disable-funct.patch
new file mode 100644
index 0000000..d2c6abb
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0028-OMAP3-fix-and-clean-up-L2-cache-enable-disable-funct.patch
@@ -0,0 +1,112 @@
+From c18bda32fdb048ea38b7ff579f365ea8858053d7 Mon Sep 17 00:00:00 2001
+From: Mans Rullgard <mans@mansr.com>
+Date: Wed, 14 Apr 2010 12:08:00 +0100
+Subject: [PATCH 28/37] OMAP3: fix and clean up L2 cache enable/disable functions
+
+On OMAP34xx ES1.0, the L2 enable bit can only be set in secure mode,
+so an SMC call to the ROM monitor is required.  On later versions,
+and on newer devices, this bit is banked and we can set it directly.
+
+The code checked only the ES revision of the chip, and hence incorrectly
+used the ROM call on ES1.0 versions of other devices.
+
+This patch adds a check for chip family as well as revision, and also
+removes some code duplication between the enable and disable functions.
+
+Signed-off-by: Mans Rullgard <mans@mansr.com>
+---
+ cpu/arm_cortexa8/omap3/cache.S |   74 +++++++++++-----------------------------
+ 1 files changed, 20 insertions(+), 54 deletions(-)
+
+diff --git a/cpu/arm_cortexa8/omap3/cache.S b/cpu/arm_cortexa8/omap3/cache.S
+index 0f63815..16afb5d 100644
+--- a/cpu/arm_cortexa8/omap3/cache.S
++++ b/cpu/arm_cortexa8/omap3/cache.S
+@@ -128,64 +128,30 @@ finished_inval:
+ 
+ 	ldmfd	r13!, {r0 - r5, r7, r9 - r12, pc}
+ 
+-
+-l2_cache_enable:
+-	push	{r0, r1, r2, lr}
+-	@ ES2 onwards we can disable/enable L2 ourselves
++l2_cache_set:
++	push	{r4-r6, lr}
++	mov	r5,  r0
+ 	bl	get_cpu_rev
+-	cmp	r0, #CPU_3XX_ES20
+-	blt	l2_cache_disable_EARLIER_THAN_ES2
+-	mrc	15, 0, r3, cr1, cr0, 1
+-	orr	r3, r3, #2
+-	mcr	15, 0, r3, cr1, cr0, 1
+-	b	l2_cache_enable_END
+-l2_cache_enable_EARLIER_THAN_ES2:
+-	@ Save r0, r12 and restore them after usage
+-	mov	r3, ip
+-	str	r3, [sp, #4]
+-	mov	r3, r0
+-	@
++	mov	r4,  r0
++	bl	get_cpu_family
++	@ ES2 onwards we can disable/enable L2 ourselves
++	cmp	r0,  #CPU_OMAP34XX
++	cmpeq	r4,  #CPU_3XX_ES10
++	mrc	15, 0, r0, cr1, cr0, 1
++	bic	r0, r0, #2
++	orr	r0, r0, r5, lsl #1
++	mcreq	15, 0, r0, cr1, cr0, 1
+ 	@ GP Device ROM code API usage here
+ 	@ r12 = AUXCR Write function and r0 value
+-	@
+ 	mov	ip, #3
+-	mrc	15, 0, r0, cr1, cr0, 1
+-	orr	r0, r0, #2
+-	@ SMI instruction to call ROM Code API
+-	.word	0xe1600070
+-	mov	r0, r3
+-	mov	ip, r3
+-	str	r3, [sp, #4]
+-l2_cache_enable_END:
+-	pop	{r1, r2, r3, pc}
++	@ SMCNE instruction to call ROM Code API
++	.word	0x11600070
++	pop	{r4-r6, pc}
+ 
++l2_cache_enable:
++	mov	r0, #1
++	b	l2_cache_set
+ 
+ l2_cache_disable:
+-	push	{r0, r1, r2, lr}
+-	@ ES2 onwards we can disable/enable L2 ourselves
+-	bl	get_cpu_rev
+-	cmp	r0, #CPU_3XX_ES20
+-	blt	l2_cache_disable_EARLIER_THAN_ES2
+-	mrc	15, 0, r3, cr1, cr0, 1
+-	bic	r3, r3, #2
+-	mcr	15, 0, r3, cr1, cr0, 1
+-	b	l2_cache_disable_END
+-l2_cache_disable_EARLIER_THAN_ES2:
+-	@ Save r0, r12 and restore them after usage
+-	mov	r3, ip
+-	str	r3, [sp, #4]
+-	mov	r3, r0
+-	@
+-	@ GP Device ROM code API usage here
+-	@ r12 = AUXCR Write function and r0 value
+-	@
+-	mov	ip, #3
+-	mrc	15, 0, r0, cr1, cr0, 1
+-	bic	r0, r0, #2
+-	@ SMI instruction to call ROM Code API
+-	.word	0xe1600070
+-	mov	r0, r3
+-	mov	ip, r3
+-	str	r3, [sp, #4]
+-l2_cache_disable_END:
+-	pop	{r1, r2, r3, pc}
++	mov	r0, #0
++	b	l2_cache_set
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0029-OMAP3-convert-setup_auxcr-to-pure-asm.patch b/recipes-bsp/u-boot/u-boot/0029-OMAP3-convert-setup_auxcr-to-pure-asm.patch
new file mode 100644
index 0000000..e1ffdca
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0029-OMAP3-convert-setup_auxcr-to-pure-asm.patch
@@ -0,0 +1,99 @@
+From 6ddb5d4e28801907af7be39e47d502fd5c8e73e1 Mon Sep 17 00:00:00 2001
+From: Mans Rullgard <mans@mansr.com>
+Date: Wed, 14 Apr 2010 16:49:57 +0100
+Subject: [PATCH 29/37] OMAP3: convert setup_auxcr() to pure asm
+
+This function consists entirely of inline asm statements, so writing
+it directly in a .S file is simpler. Additionally, the inline asm is
+not safe as is, since registers are not guaranteed to be preserved
+between asm() statements.
+
+Signed-off-by: Mans Rullgard <mans@mansr.com>
+---
+ cpu/arm_cortexa8/omap3/board.c |   35 -----------------------------------
+ cpu/arm_cortexa8/omap3/cache.S |   19 +++++++++++++++++++
+ 2 files changed, 19 insertions(+), 35 deletions(-)
+
+diff --git a/cpu/arm_cortexa8/omap3/board.c b/cpu/arm_cortexa8/omap3/board.c
+index 0126152..7f49199 100644
+--- a/cpu/arm_cortexa8/omap3/board.c
++++ b/cpu/arm_cortexa8/omap3/board.c
+@@ -122,41 +122,6 @@ void secureworld_exit()
+ }
+ 
+ /******************************************************************************
+- * Routine: setup_auxcr()
+- * Description: Write to AuxCR desired value using SMI.
+- *              general use.
+- *****************************************************************************/
+-void setup_auxcr()
+-{
+-	unsigned long i;
+-	volatile unsigned int j;
+-	/* Save r0, r12 and restore them after usage */
+-	__asm__ __volatile__("mov %0, r12":"=r"(j));
+-	__asm__ __volatile__("mov %0, r0":"=r"(i));
+-
+-	/*
+-	 * GP Device ROM code API usage here
+-	 * r12 = AUXCR Write function and r0 value
+-	 */
+-	__asm__ __volatile__("mov r12, #0x3");
+-	__asm__ __volatile__("mrc p15, 0, r0, c1, c0, 1");
+-	/* Enabling ASA */
+-	__asm__ __volatile__("orr r0, r0, #0x10");
+-	/* Enable L1NEON */
+-	__asm__ __volatile__("orr r0, r0, #1 << 5");
+-	/* SMI instruction to call ROM Code API */
+-	__asm__ __volatile__(".word 0xE1600070");
+-	/* Set PLD_FWD bit in L2AUXCR (Cortex-A8 erratum 725233 workaround) */
+-	__asm__ __volatile__("mov r12, #0x2");
+-	__asm__ __volatile__("mrc p15, 1, r0, c9, c0, 2");
+-	__asm__ __volatile__("orr r0, r0, #1 << 27");
+-	/* SMI instruction to call ROM Code API */
+-	__asm__ __volatile__(".word 0xE1600070");
+-	__asm__ __volatile__("mov r0, %0":"=r"(i));
+-	__asm__ __volatile__("mov r12, %0":"=r"(j));
+-}
+-
+-/******************************************************************************
+  * Routine: try_unlock_sram()
+  * Description: If chip is GP/EMU(special) type, unlock the SRAM for
+  *              general use.
+diff --git a/cpu/arm_cortexa8/omap3/cache.S b/cpu/arm_cortexa8/omap3/cache.S
+index 16afb5d..61e6946 100644
+--- a/cpu/arm_cortexa8/omap3/cache.S
++++ b/cpu/arm_cortexa8/omap3/cache.S
+@@ -43,6 +43,7 @@
+ .global invalidate_dcache
+ .global l2_cache_enable
+ .global l2_cache_disable
++.global setup_auxcr
+ 
+ /*
+  *	invalidate_dcache()
+@@ -155,3 +156,21 @@ l2_cache_enable:
+ l2_cache_disable:
+ 	mov	r0, #0
+ 	b	l2_cache_set
++
++/******************************************************************************
++ * Routine: setup_auxcr()
++ * Description: Write to AuxCR desired value using SMI.
++ *              general use.
++ *****************************************************************************/
++setup_auxcr:
++	mov	r12, #0x3
++	mrc	p15, 0, r0, c1, c0, 1
++	orr	r0, r0, #0x10			@ Enable ASA
++	orr	r0, r0, #1 << 5			@ Enable L1NEON
++	.word 0xE1600070			@ SMC
++	mov	r12, #0x2
++	mrc	p15, 1, r0, c9, c0, 2
++	@ Set PLD_FWD bit in L2AUXCR (Cortex-A8 erratum 725233 workaround)
++	orr	r0, r0, #1 << 27
++	.word 0xE1600070			@ SMC
++	bx	lr
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0030-OMAP3-apply-Cortex-A8-errata-workarounds-only-on-aff.patch b/recipes-bsp/u-boot/u-boot/0030-OMAP3-apply-Cortex-A8-errata-workarounds-only-on-aff.patch
new file mode 100644
index 0000000..af669ec
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0030-OMAP3-apply-Cortex-A8-errata-workarounds-only-on-aff.patch
@@ -0,0 +1,46 @@
+From 4e7bc59affc2a71de40259330e27e62181993968 Mon Sep 17 00:00:00 2001
+From: Mans Rullgard <mans@mansr.com>
+Date: Wed, 14 Apr 2010 17:10:28 +0100
+Subject: [PATCH 30/37] OMAP3: apply Cortex-A8 errata workarounds only on affected revisions
+
+The workarounds for errata 621766 and 725233 should only be applied
+on affected Cortex-A8 revisions.  Recent chips use r3px cores where
+these have been fixed.
+
+Signed-off-by: Mans Rullgard <mans@mansr.com>
+---
+ cpu/arm_cortexa8/omap3/cache.S |   13 ++++++++++---
+ 1 files changed, 10 insertions(+), 3 deletions(-)
+
+diff --git a/cpu/arm_cortexa8/omap3/cache.S b/cpu/arm_cortexa8/omap3/cache.S
+index 61e6946..932e4eb 100644
+--- a/cpu/arm_cortexa8/omap3/cache.S
++++ b/cpu/arm_cortexa8/omap3/cache.S
+@@ -163,14 +163,21 @@ l2_cache_disable:
+  *              general use.
+  *****************************************************************************/
+ setup_auxcr:
++	mrc	p15, 0, r0, c0, c0, 0		@ read main ID register
++	and	r2, r0, #0x00f00000		@ variant
++	and	r3, r0, #0x0000000f		@ revision
++	orr	r1, r3, r2, lsr #20-4		@ combine variant and revision
+ 	mov	r12, #0x3
+ 	mrc	p15, 0, r0, c1, c0, 1
+ 	orr	r0, r0, #0x10			@ Enable ASA
+-	orr	r0, r0, #1 << 5			@ Enable L1NEON
++	@ Enable L1NEON on pre-r2p1 (erratum 621766 workaround)
++	cmp	r1, #0x21
++	orrlt	r0, r0, #1 << 5
+ 	.word 0xE1600070			@ SMC
+ 	mov	r12, #0x2
+ 	mrc	p15, 1, r0, c9, c0, 2
+-	@ Set PLD_FWD bit in L2AUXCR (Cortex-A8 erratum 725233 workaround)
+-	orr	r0, r0, #1 << 27
++	@ Set PLD_FWD bit in L2AUXCR on pre-r2p1 (erratum 725233 workaround)
++	cmp	r1, #0x21
++	orrlt	r0, r0, #1 << 27
+ 	.word 0xE1600070			@ SMC
+ 	bx	lr
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0031-OMAP3-beagle-add-more-expansionboards-based-on-http-.patch b/recipes-bsp/u-boot/u-boot/0031-OMAP3-beagle-add-more-expansionboards-based-on-http-.patch
new file mode 100644
index 0000000..9ea1912
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0031-OMAP3-beagle-add-more-expansionboards-based-on-http-.patch
@@ -0,0 +1,61 @@
+From bbfb38ccd1e2bb19a1eb698bd37cd1ab50c87b37 Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@dominion.thruhere.net>
+Date: Fri, 23 Apr 2010 10:50:43 +0200
+Subject: [PATCH 31/37] OMAP3: beagle: add more expansionboards, based on http://www.elinux.org/BeagleBoardPinMux#Vendor_and_Device_IDs
+
+---
+ board/ti/beagle/beagle.c |    8 ++++++++
+ board/ti/beagle/beagle.h |    6 ++++++
+ 2 files changed, 14 insertions(+), 0 deletions(-)
+
+diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
+index 974a72c..0544178 100644
+--- a/board/ti/beagle/beagle.c
++++ b/board/ti/beagle/beagle.c
+@@ -55,11 +55,15 @@ static struct {
+ #define TINCANTOOLS_VENDORID	0x0100
+ #define GUMSTIX_VENDORID		0x0200
+ #define SPECIALCOMP_VENDORID	0x0300
++#define HYR_VENDORID			0x0400
++#define MENTOREL_VENDORID		0x0500
++#define KBADC_VENDORID			0x0600
+ 
+ #define TINCANTOOLS_ZIPPY		0x01000100
+ #define TINCANTOOLS_ZIPPY2		0x02000100
+ #define TINCANTOOLS_TRAINER		0x04000100
+ #define TINCANTOOLS_SHOWDOG		0x03000100
++#define KBADC_BEAGLEFPGA		0x01000600
+ 
+ #define BEAGLE_NO_EEPROM		0xffffffff
+ 
+@@ -184,6 +188,10 @@ int misc_init_r(void)
+ 			/* Place holder for DSS2 definition for showdog lcd */
+ 			setenv("defaultdisplay", "showdoglcd");
+ 			break;
++		case KBADC_BEAGLEFPGA:
++			printf("Recognized KBADC Beagle FPGA board\n");
++			MUX_KBADC_BEAGLEFPGA();
++			break;
+ 		case BEAGLE_NO_EEPROM:
+ 			printf("No EEPROM on expansion board\n");
+ 			break;
+diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h
+index 69f9398..90a0ebf 100644
+--- a/board/ti/beagle/beagle.h
++++ b/board/ti/beagle/beagle.h
+@@ -435,6 +435,12 @@ const omap3_sysinfo sysinfo = {
+ 	MUX_VAL(CP(MCBSP3_DR),      (IEN  | PTD | DIS | M4)) /*GPIO_142*/\
+ 	MUX_VAL(CP(MCBSP3_CLKX),    (IEN  | PTD | DIS | M4)) /*GPIO_141*/\
+ 
++#define MUX_KBADC_BEAGLEFPGA() \
++	MUX_VAL(CP(MCBSP1_CLKR),    (IEN  | PTU | DIS | M1)) /*MCSPI4_CLK*/\
++	MUX_VAL(CP(MCBSP1_DX),      (IDIS | PTU | DIS | M1)) /*MCSPI4_SIMO*/\
++	MUX_VAL(CP(MCBSP1_DR),      (IEN  | PTU | EN  | M1)) /*MCSPI4_SOMI*/\
++	MUX_VAL(CP(MCBSP1_FSX),     (IDIS | PTU | DIS | M1)) /*MCSPI4_CS0*/\
++
+ /*
+  * Display Configuration
+  */
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0032-OMAP3-beagle-set-mpurate-to-600-for-revB-and-revC1-3.patch b/recipes-bsp/u-boot/u-boot/0032-OMAP3-beagle-set-mpurate-to-600-for-revB-and-revC1-3.patch
new file mode 100644
index 0000000..c99d3d9
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0032-OMAP3-beagle-set-mpurate-to-600-for-revB-and-revC1-3.patch
@@ -0,0 +1,29 @@
+From ae05ca488390671516bd4ed021eb43901fee740f Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@dominion.thruhere.net>
+Date: Tue, 27 Apr 2010 13:44:16 +0200
+Subject: [PATCH 32/37] OMAP3: beagle: set mpurate to 600 for revB and revC1-3
+
+---
+ board/ti/beagle/beagle.c |    2 ++
+ 1 files changed, 2 insertions(+), 0 deletions(-)
+
+diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
+index 0544178..6778499 100644
+--- a/board/ti/beagle/beagle.c
++++ b/board/ti/beagle/beagle.c
+@@ -211,10 +211,12 @@ int misc_init_r(void)
+ 	switch (beagle_revision) {
+ 	case REVISION_AXBX:
+ 		printf("Beagle Rev Ax/Bx\n");
++		setenv("mpurate", "600");
+ 		break;
+ 	case REVISION_CX:
+ 		printf("Beagle Rev C1/C2/C3\n");
+ 		MUX_BEAGLE_C();
++		setenv("mpurate", "600");
+ 		break;
+ 	case REVISION_C4:
+ 		printf("Beagle Rev C4\n");
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0033-OMAP3-beagle-prettify-expansionboard-message-a-bit.patch b/recipes-bsp/u-boot/u-boot/0033-OMAP3-beagle-prettify-expansionboard-message-a-bit.patch
new file mode 100644
index 0000000..a7b2c01
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0033-OMAP3-beagle-prettify-expansionboard-message-a-bit.patch
@@ -0,0 +1,25 @@
+From caf18bc716d77d7bf2c75bc58ffbcbf09ae79f2b Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@dominion.thruhere.net>
+Date: Tue, 27 Apr 2010 13:45:28 +0200
+Subject: [PATCH 33/37] OMAP3: beagle: prettify expansionboard message a bit
+
+---
+ board/ti/beagle/beagle.c |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
+index 6778499..58fb7c3 100644
+--- a/board/ti/beagle/beagle.c
++++ b/board/ti/beagle/beagle.c
+@@ -165,7 +165,7 @@ int misc_init_r(void)
+ 
+ 	beagle_identify();
+ 
+-	printf("\nProbing for expansion boards, if none are connected you'll see a harmless I2C error.\n");
++	printf("\nProbing for expansion boards, if none are connected you'll see a harmless I2C error.\n\n");
+ 
+ 	switch (get_expansion_id()) {
+ 		case TINCANTOOLS_ZIPPY:
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0034-OMAP3-beagle-add-pinmux-for-Tincantools-Trainer-expa.patch b/recipes-bsp/u-boot/u-boot/0034-OMAP3-beagle-add-pinmux-for-Tincantools-Trainer-expa.patch
new file mode 100644
index 0000000..5caa6f0
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0034-OMAP3-beagle-add-pinmux-for-Tincantools-Trainer-expa.patch
@@ -0,0 +1,53 @@
+From 8580a3eafe3351e3c0f1ca3d0bc959bbeec40e28 Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@dominion.thruhere.net>
+Date: Tue, 27 Apr 2010 18:25:57 +0200
+Subject: [PATCH 34/37] OMAP3: beagle: add pinmux for Tincantools Trainer expansionboard
+
+---
+ board/ti/beagle/beagle.c |    2 ++
+ board/ti/beagle/beagle.h |   16 +++++++++++++++-
+ 2 files changed, 17 insertions(+), 1 deletions(-)
+
+diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
+index 58fb7c3..39c53f2 100644
+--- a/board/ti/beagle/beagle.c
++++ b/board/ti/beagle/beagle.c
+@@ -181,6 +181,8 @@ int misc_init_r(void)
+ 		case TINCANTOOLS_TRAINER:
+ 			printf("Recognized Tincantools Trainer expansion board (rev %d %s)\n",
+ 				expansion_config.revision, expansion_config.fab_revision);
++			MUX_TINCANTOOLS_ZIPPY();
++			MUX_TINCANTOOLS_TRAINER();
+ 			break;
+ 		case TINCANTOOLS_SHOWDOG:
+ 			printf("Recognized Tincantools Showdow expansion board (rev %d %s)\n",
+diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h
+index 90a0ebf..7774855 100644
+--- a/board/ti/beagle/beagle.h
++++ b/board/ti/beagle/beagle.h
+@@ -433,7 +433,21 @@ const omap3_sysinfo sysinfo = {
+ 	MUX_VAL(CP(MCBSP1_CLKX),    (IEN  | PTD | DIS | M4)) /*GPIO_162*/\
+ 	MUX_VAL(CP(MCBSP3_DX),      (IEN  | PTD | DIS | M4)) /*GPIO_140*/\
+ 	MUX_VAL(CP(MCBSP3_DR),      (IEN  | PTD | DIS | M4)) /*GPIO_142*/\
+-	MUX_VAL(CP(MCBSP3_CLKX),    (IEN  | PTD | DIS | M4)) /*GPIO_141*/\
++	MUX_VAL(CP(MCBSP3_CLKX),    (IEN  | PTD | DIS | M4)) /*GPIO_141*/
++
++#define MUX_TINCANTOOLS_TRAINER() \
++	MUX_VAL(CP(MMC2_CLK),       (IEN  | PTU | EN  | M4)) /*GPIO_130*/\
++	MUX_VAL(CP(MMC2_CMD),       (IEN  | PTU | EN  | M4)) /*GPIO_131*/\
++	MUX_VAL(CP(MMC2_DAT0),      (IEN  | PTU | EN  | M4)) /*GPIO_132*/\
++	MUX_VAL(CP(MMC2_DAT1),      (IEN  | PTU | EN  | M4)) /*GPIO_133*/\
++	MUX_VAL(CP(MMC2_DAT2),      (IEN  | PTU | EN  | M4)) /*GPIO_134*/\
++	MUX_VAL(CP(MMC2_DAT3),      (IEN  | PTU | EN  | M4)) /*GPIO_135*/\
++	MUX_VAL(CP(MMC2_DAT4),      (IEN  | PTU | EN  | M4)) /*GPIO_136*/\
++	MUX_VAL(CP(MMC2_DAT5),      (IEN  | PTU | EN  | M4)) /*GPIO_137*/\
++	MUX_VAL(CP(MMC2_DAT6),      (IEN  | PTU | EN  | M4)) /*GPIO_138*/\
++	MUX_VAL(CP(MMC2_DAT7),      (IEN  | PTU | EN  | M4)) /*GPIO_139*/\
++	MUX_VAL(CP(MCBSP3_DX),      (IEN  | PTU | EN  | M4)) /*GPIO_140*/\
++	MUX_VAL(CP(MCBSP3_CLKX),    (IEN  | PTU | EN  | M4)) /*GPIO_141*/
+ 
+ #define MUX_KBADC_BEAGLEFPGA() \
+ 	MUX_VAL(CP(MCBSP1_CLKR),    (IEN  | PTU | DIS | M1)) /*MCSPI4_CLK*/\
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0035-OMAP3-Beagle-set-mpurate-to-1000-for-xM.patch b/recipes-bsp/u-boot/u-boot/0035-OMAP3-Beagle-set-mpurate-to-1000-for-xM.patch
new file mode 100644
index 0000000..5c02fcb
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0035-OMAP3-Beagle-set-mpurate-to-1000-for-xM.patch
@@ -0,0 +1,24 @@
+From c45e93aef4d54b262f0d8e1ecf6b111f5e1c2a4c Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@dominion.thruhere.net>
+Date: Fri, 30 Apr 2010 13:25:41 +0200
+Subject: [PATCH 35/37] OMAP3: Beagle: set mpurate to 1000 for xM
+
+---
+ board/ti/beagle/beagle.c |    1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
+index 39c53f2..9300984 100644
+--- a/board/ti/beagle/beagle.c
++++ b/board/ti/beagle/beagle.c
+@@ -238,6 +238,7 @@ int misc_init_r(void)
+ 					TWL4030_PM_RECEIVER_VAUX2_VSEL_18,
+ 					TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
+ 					TWL4030_PM_RECEIVER_DEV_GRP_P1);
++		setenv("mpurate", "1000");
+ 		break;
+ 	default:
+ 		printf("Beagle unknown 0x%02x\n", beagle_revision);
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0036-OMAP3-Beagle-decrease-bootdelay-to-3-use-VGA-for-def.patch b/recipes-bsp/u-boot/u-boot/0036-OMAP3-Beagle-decrease-bootdelay-to-3-use-VGA-for-def.patch
new file mode 100644
index 0000000..5f89f1a
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0036-OMAP3-Beagle-decrease-bootdelay-to-3-use-VGA-for-def.patch
@@ -0,0 +1,34 @@
+From 39f15722db5595411ec085e36b7fd7657415a554 Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@dominion.thruhere.net>
+Date: Fri, 30 Apr 2010 13:26:01 +0200
+Subject: [PATCH 36/37] OMAP3: Beagle: decrease bootdelay to 3, use VGA for default resolution
+
+---
+ include/configs/omap3_beagle.h |    4 ++--
+ 1 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
+index 7bcbe9b..93a6a5a 100644
+--- a/include/configs/omap3_beagle.h
++++ b/include/configs/omap3_beagle.h
+@@ -178,7 +178,7 @@
+ 							/* partition */
+ 
+ /* Environment information */
+-#define CONFIG_BOOTDELAY		10
++#define CONFIG_BOOTDELAY		3
+ 
+ #define CONFIG_EXTRA_ENV_SETTINGS \
+ 	"loadaddr=0x82000000\0" \
+@@ -186,7 +186,7 @@
+ 	"console=ttyS2,115200n8\0" \
+ 	"mpurate=500\0" \
+ 	"vram=12M\0" \
+-	"dvimode=1024x768MR-16@60\0" \
++	"dvimode=640x480MR-16@60\0" \
+ 	"defaultdisplay=dvi\0" \
+ 	"mmcroot=/dev/mmcblk0p2 rw\0" \
+ 	"mmcrootfstype=ext3 rootwait\0" \
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0037-OMAP3-beagle-pass-expansionboard-name-in-bootargs.patch b/recipes-bsp/u-boot/u-boot/0037-OMAP3-beagle-pass-expansionboard-name-in-bootargs.patch
new file mode 100644
index 0000000..2ee844b
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0037-OMAP3-beagle-pass-expansionboard-name-in-bootargs.patch
@@ -0,0 +1,87 @@
+From 8ad472139f7b8b7c59c0192f3e2f50a20beadf59 Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@dominion.thruhere.net>
+Date: Mon, 3 May 2010 10:17:41 +0200
+Subject: [PATCH 37/37] OMAP3: beagle: pass expansionboard name in bootargs
+
+This makes it possible to do in-kernel fixups for expansionboards like reclaiming GPIOs
+---
+ board/ti/beagle/beagle.c       |    7 +++++++
+ include/configs/omap3_beagle.h |    3 +++
+ 2 files changed, 10 insertions(+), 0 deletions(-)
+
+diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
+index 9300984..556e995 100644
+--- a/board/ti/beagle/beagle.c
++++ b/board/ti/beagle/beagle.c
+@@ -172,33 +172,40 @@ int misc_init_r(void)
+ 			printf("Recognized Tincantools Zippy expansion board (rev %d %s)\n",
+ 				expansion_config.revision, expansion_config.fab_revision);
+ 			MUX_TINCANTOOLS_ZIPPY();
++			setenv("buddy", "zippy");
+ 			break;
+ 		case TINCANTOOLS_ZIPPY2:
+ 			printf("Recognized Tincantools Zippy2 expansion board (rev %d %s)\n",
+ 				expansion_config.revision, expansion_config.fab_revision);
+ 			MUX_TINCANTOOLS_ZIPPY();
++			setenv("buddy", "zippy2");
+ 			break;
+ 		case TINCANTOOLS_TRAINER:
+ 			printf("Recognized Tincantools Trainer expansion board (rev %d %s)\n",
+ 				expansion_config.revision, expansion_config.fab_revision);
+ 			MUX_TINCANTOOLS_ZIPPY();
+ 			MUX_TINCANTOOLS_TRAINER();
++			setenv("buddy", "trainer");
+ 			break;
+ 		case TINCANTOOLS_SHOWDOG:
+ 			printf("Recognized Tincantools Showdow expansion board (rev %d %s)\n",
+ 				expansion_config.revision, expansion_config.fab_revision);
+ 			/* Place holder for DSS2 definition for showdog lcd */
+ 			setenv("defaultdisplay", "showdoglcd");
++			setenv("buddy", "showdog");
+ 			break;
+ 		case KBADC_BEAGLEFPGA:
+ 			printf("Recognized KBADC Beagle FPGA board\n");
+ 			MUX_KBADC_BEAGLEFPGA();
++			setenv("buddy", "beaglefpga");
+ 			break;
+ 		case BEAGLE_NO_EEPROM:
+ 			printf("No EEPROM on expansion board\n");
++			setenv("buddy", "none");
+ 			break;
+ 		default:
+ 			printf("Unrecognized expansion board: %x\n", expansion_config.device_vendor);
++			setenv("buddy", "unknown");
+ 	}
+ 
+ 	if (expansion_config.content == 1)
+diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
+index 93a6a5a..affabf1 100644
+--- a/include/configs/omap3_beagle.h
++++ b/include/configs/omap3_beagle.h
+@@ -185,6 +185,7 @@
+ 	"usbtty=cdc_acm\0" \
+ 	"console=ttyS2,115200n8\0" \
+ 	"mpurate=500\0" \
++	"buddy=none\0" \
+ 	"vram=12M\0" \
+ 	"dvimode=640x480MR-16@60\0" \
+ 	"defaultdisplay=dvi\0" \
+@@ -194,6 +195,7 @@
+ 	"nandrootfstype=jffs2\0" \
+ 	"mmcargs=setenv bootargs console=${console} " \
+ 		"mpurate=${mpurate} " \
++		"buddy=${buddy} "\
+ 		"vram=${vram} " \
+ 		"omapfb.mode=dvi:${dvimode} " \
+ 		"omapdss.def_disp=${defaultdisplay} " \
+@@ -201,6 +203,7 @@
+ 		"rootfstype=${mmcrootfstype}\0" \
+ 	"nandargs=setenv bootargs console=${console} " \
+ 		"mpurate=${mpurate} " \
++		"buddy=${buddy} "\
+ 		"vram=${vram} " \
+ 		"omapfb.mode=dvi:${dvimode} " \
+ 		"omapdss.def_disp=${defaultdisplay} " \
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0038-Added-configurations-for-xM-Rev-A-board.patch b/recipes-bsp/u-boot/u-boot/0038-Added-configurations-for-xM-Rev-A-board.patch
new file mode 100644
index 0000000..4cfcfe1
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0038-Added-configurations-for-xM-Rev-A-board.patch
@@ -0,0 +1,29 @@
+From 9a5d5518c3d3844cc49cf2d9ef5aeabca1e87c30 Mon Sep 17 00:00:00 2001
+From: Jason Kridner <jkridner@beagleboard.org>
+Date: Wed, 5 May 2010 14:53:49 -0500
+Subject: [PATCH 38/38] Added configurations for xM Rev A board
+
+This defaults to "on" condition for USB and DVI.  May want to revise for
+power savings.
+---
+ board/ti/beagle/beagle.h |    4 ++++
+ 1 files changed, 4 insertions(+), 0 deletions(-)
+
+diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h
+index 7774855..cb7fd1c 100644
+--- a/board/ti/beagle/beagle.h
++++ b/board/ti/beagle/beagle.h
+@@ -389,6 +389,10 @@ const omap3_sysinfo sysinfo = {
+ 	MUX_VAL(CP(UART2_TX),		(IDIS | PTD | DIS | M0)) /*UART2_TX*/
+ 
+ #define MUX_BEAGLE_XM() \
++	MUX_VAL(CP(GPMC_NCS5),		(IDIS | PTD | EN  | M4)) /*GPIO_56 - USB HUB reset*/\
++	MUX_VAL(CP(GPMC_WAIT0),		(IDIS | PTU | EN  | M4)) /*GPIO_63 - P8 USB HUB nreset*/\
++	MUX_VAL(CP(MMC1_DAT7),		(IDIS | PTU | EN  | M4)) /*GPIO_129 - DVI enable*/\
++	MUX_VAL(CP(HDQ_SIO),		(IDIS | PTU | EN  | M4)) /*GPIO_170 - P8 DVI enable*/\
+ 	MUX_VAL(CP(MCBSP3_DX),		(IEN  | PTD | DIS | M4)) /*GPIO_140*/\
+ 	MUX_VAL(CP(MCBSP3_DR),		(IEN  | PTD | DIS | M4)) /*GPIO_142*/\
+ 	MUX_VAL(CP(MCBSP3_CLKX),	(IEN  | PTD | DIS | M4)) /*GPIO_141*/\
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0038-BeagleBoard-Added-LED-driver.patch b/recipes-bsp/u-boot/u-boot/0038-BeagleBoard-Added-LED-driver.patch
new file mode 100644
index 0000000..74ee4e3
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0038-BeagleBoard-Added-LED-driver.patch
@@ -0,0 +1,164 @@
+From 157b125b905b6dc69164d3f43eeb5e40d3744648 Mon Sep 17 00:00:00 2001
+From: Jason Kridner <jkridner@beagleboard.org>
+Date: Thu, 20 May 2010 06:14:01 -0500
+Subject: [PATCH] BeagleBoard: Added LED driver
+
+Added LED driver using status_led.  USR0 is set to monitor the boot
+status.  USR1 is set to be the green LED.
+(cherry picked from commit 048b526fd7cc0c642f27c674b3e235321c880b66)
+(cherry picked from commit 21c574d9e20f86ab757f5efdd9146e6607f2faba)
+
+Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
+---
+ board/ti/beagle/Makefile |    4 ++-
+ board/ti/beagle/beagle.c |    8 ++++
+ board/ti/beagle/led.c    |   91 ++++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 102 insertions(+), 1 deletions(-)
+ create mode 100644 board/ti/beagle/led.c
+
+diff --git a/board/ti/beagle/Makefile b/board/ti/beagle/Makefile
+index f797112..4cc675c 100644
+--- a/board/ti/beagle/Makefile
++++ b/board/ti/beagle/Makefile
+@@ -25,8 +25,10 @@ include $(TOPDIR)/config.mk
+ 
+ LIB	= $(obj)lib$(BOARD).a
+ 
+-COBJS	:= beagle.o
++COBJS-y	:= $(BOARD).o
++COBJS-$(CONFIG_STATUS_LED) += led.o
+ 
++COBJS	:= $(sort $(COBJS-y))
+ SRCS	:= $(COBJS:.o=.c)
+ OBJS	:= $(addprefix $(obj),$(COBJS))
+ 
+diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
+index 556e995..d21b9c8 100644
+--- a/board/ti/beagle/beagle.c
++++ b/board/ti/beagle/beagle.c
+@@ -30,6 +30,9 @@
+  * MA 02111-1307 USA
+  */
+ #include <common.h>
++#ifdef CONFIG_STATUS_LED
++#include <status_led.h>
++#endif
+ #include <twl4030.h>
+ #include <asm/io.h>
+ #include <asm/arch/mux.h>
+@@ -83,6 +86,10 @@ int board_init(void)
+ 	/* boot param addr */
+ 	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+ 
++#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
++	status_led_set (STATUS_LED_BOOT, STATUS_LED_ON);
++#endif
++
+ 	return 0;
+ }
+ 
+@@ -278,3 +285,4 @@ void set_muxconf_regs(void)
+ {
+ 	MUX_BEAGLE();
+ }
++
+diff --git a/board/ti/beagle/led.c b/board/ti/beagle/led.c
+new file mode 100644
+index 0000000..df26552
+--- /dev/null
++++ b/board/ti/beagle/led.c
+@@ -0,0 +1,91 @@
++/*
++ * Copyright (c) 2010 Texas Instruments, Inc.
++ * Jason Kridner <jkridner@beagleboard.org>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++#include <common.h>
++#include <status_led.h>
++#include <asm/arch/cpu.h>
++#include <asm/io.h>
++#include <asm/arch/sys_proto.h>
++#include <asm/arch/gpio.h>
++
++static unsigned int saved_state[2] = {STATUS_LED_OFF, STATUS_LED_OFF};
++
++/* GPIO pins for the LEDs */
++#define BEAGLE_LED_USR0	149
++#define BEAGLE_LED_USR1	150
++
++#ifdef STATUS_LED_GREEN
++void green_LED_off (void)
++{
++	__led_set (STATUS_LED_GREEN, 0);
++}
++
++void green_LED_on (void)
++{
++	__led_set (STATUS_LED_GREEN, 1);
++}
++#endif
++
++void __led_init (led_id_t mask, int state)
++{
++	__led_set (mask, state);
++}
++
++void __led_toggle (led_id_t mask)
++{
++#ifdef STATUS_LED_BIT
++	if (STATUS_LED_BIT & mask) {
++		if (STATUS_LED_ON == saved_state[0])
++			__led_set(STATUS_LED_BIT, 0);
++		else
++			__led_set(STATUS_LED_BIT, 1);
++	}
++#endif
++#ifdef STATUS_LED_BIT1
++	if (STATUS_LED_BIT1 & mask) {
++		if (STATUS_LED_ON == saved_state[1])
++			__led_set(STATUS_LED_BIT1, 0);
++		else
++			__led_set(STATUS_LED_BIT1, 1);
++	}
++#endif
++}
++
++void __led_set (led_id_t mask, int state)
++{
++#ifdef STATUS_LED_BIT
++	if (STATUS_LED_BIT & mask) {
++		if (!omap_request_gpio(BEAGLE_LED_USR0)) {
++			omap_set_gpio_direction(BEAGLE_LED_USR0, 0);
++			omap_set_gpio_dataout(BEAGLE_LED_USR0, state);
++		}
++		saved_state[0] = state;
++	}
++#endif
++#ifdef STATUS_LED_BIT1
++	if (STATUS_LED_BIT1 & mask) {
++		if (!omap_request_gpio(BEAGLE_LED_USR1)) {
++			omap_set_gpio_direction(BEAGLE_LED_USR1, 0);
++			omap_set_gpio_dataout(BEAGLE_LED_USR1, state);
++		}
++		saved_state[1] = state;
++	}
++#endif
++}
++
+-- 
+1.5.6.4
+
diff --git a/recipes-bsp/u-boot/u-boot/0039-Add-led-command.patch b/recipes-bsp/u-boot/u-boot/0039-Add-led-command.patch
new file mode 100644
index 0000000..6adbe2f
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0039-Add-led-command.patch
@@ -0,0 +1,256 @@
+From 609524ecd54526b3f3c7d52cc43a3c9795970f6b Mon Sep 17 00:00:00 2001
+From: Jason Kridner <jkridner@beagleboard.org>
+Date: Thu, 20 May 2010 05:41:26 -0500
+Subject: [PATCH] Add 'led' command
+
+This patch allows any board implementing the coloured LED API
+to control the LEDs from the console.
+
+led [green | yellow | red | all ]  [ on | off ]
+
+or
+
+led [ 1 | 2 | 3 | all ]  [ on | off ]
+
+Adds configuration item CONFIG_CMD_LED enabling the command.
+
+Partially based on patch from Ulf Samuelsson:
+http://www.mail-archive.com/u-boot@lists.denx.de/msg09593.html.
+(cherry picked from commit aaf47f8d6af81393b7d3275d69b5dbdf07a3d6fb)
+(cherry picked from commit 3d314bf59a48c2ee93d06d50b81f109af6a6c1ec)
+
+Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
+---
+ common/Makefile  |    1 +
+ common/cmd_led.c |  207 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 208 insertions(+), 0 deletions(-)
+ create mode 100644 common/cmd_led.c
+
+diff --git a/common/Makefile b/common/Makefile
+index dbf7a05..1d717ca 100644
+--- a/common/Makefile
++++ b/common/Makefile
+@@ -106,6 +106,7 @@ COBJS-$(CONFIG_CMD_IRQ) += cmd_irq.o
+ COBJS-$(CONFIG_CMD_ITEST) += cmd_itest.o
+ COBJS-$(CONFIG_CMD_JFFS2) += cmd_jffs2.o
+ COBJS-$(CONFIG_CMD_CRAMFS) += cmd_cramfs.o
++COBJS-$(CONFIG_CMD_LED) += cmd_led.o
+ COBJS-$(CONFIG_CMD_LICENSE) += cmd_license.o
+ COBJS-y += cmd_load.o
+ COBJS-$(CONFIG_LOGBUFFER) += cmd_log.o
+diff --git a/common/cmd_led.c b/common/cmd_led.c
+new file mode 100644
+index 0000000..3b7b534
+--- /dev/null
++++ b/common/cmd_led.c
+@@ -0,0 +1,207 @@
++/*
++ * (C) Copyright 2010
++ * Jason Kridner <jkridner@beagleboard.org>
++ *
++ * Based on cmd_led.c patch from:
++ * http://www.mail-archive.com/u-boot@lists.denx.de/msg06873.html
++ * (C) Copyright 2008
++ * Ulf Samuelsson <ulf.samuelsson@atmel.com>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++/*
++ * This file provides a shell like 'test' function to return
++ * true/false from an integer or string compare of two memory
++ * locations or a location and a scalar/literal.
++ * A few parts were lifted from bash 'test' command
++ */
++
++#include <common.h>
++#include <config.h>
++#include <command.h>
++#include <status_led.h>
++
++int do_led ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] )
++{
++#ifdef CONFIG_BOARD_SPECIFIC_LED
++	led_id_t mask;
++#endif
++	int state;
++
++	/* Validate arguments */
++	if ((argc != 3)){
++		printf("Usage:\n%s\n", cmdtp->usage);
++		return 1;
++	}
++
++	if (strcmp(argv[2], "off") == 0) {
++		state = 0;
++	} else if (strcmp(argv[2], "on") == 0) {
++		state = 1;
++	} else {
++		printf ("Usage:\n%s\n", cmdtp->usage);
++		return 1;
++	}
++
++#if defined(STATUS_LED_BIT) && defined(CONFIG_BOARD_SPECIFIC_LED)
++	if (strcmp(argv[1], "0") == 0) {
++		mask = STATUS_LED_BIT;
++		__led_set(mask, state);
++	}
++	else
++#endif
++#if defined(STATUS_LED_BIT1) && defined(CONFIG_BOARD_SPECIFIC_LED)
++	if (strcmp(argv[1], "1") == 0) {
++		mask = STATUS_LED_BIT1;
++		__led_set(mask, state);
++	}
++	else
++#endif
++#if defined(STATUS_LED_BIT2) && defined(CONFIG_BOARD_SPECIFIC_LED)
++	if (strcmp(argv[1], "2") == 0) {
++		mask = STATUS_LED_BIT2;
++		__led_set(mask, state);
++	}
++	else
++#endif
++#if defined(STATUS_LED_BIT3) && defined(CONFIG_BOARD_SPECIFIC_LED)
++	if (strcmp(argv[1], "3") == 0) {
++		mask = STATUS_LED_BIT3;
++		__led_set(mask, state);
++	}
++	else
++#endif
++#ifdef STATUS_LED_RED
++	if (strcmp(argv[1], "red") == 0) {
++		if (state == 0)
++			red_LED_off();
++		else
++			red_LED_on();
++	}
++	else
++#endif
++#ifdef STATUS_LED_GREEN
++	if (strcmp(argv[1], "green") == 0) {
++		if (state == 0)
++			green_LED_off();
++		else
++			green_LED_on();
++	}
++	else
++#endif
++#ifdef STATUS_LED_YELLOW
++	if (strcmp(argv[1], "yellow") == 0) {
++		if (state == 0)
++			yellow_LED_off();
++		else
++			yellow_LED_on();
++	}
++	else
++#endif
++#ifdef STATUS_LED_BLUE
++	if (strcmp(argv[1], "blue") == 0) {
++		if (state == 0)
++			blue_LED_off();
++		else
++			blue_LED_on();
++	}
++	else
++#endif
++	if (strcmp(argv[1], "all") == 0) {
++		mask = 0
++#if defined(STATUS_LED_BIT) && defined(CONFIG_BOARD_SPECIFIC_LED)
++			| STATUS_LED_BIT
++#endif
++#if defined(STATUS_LED_BIT1) && defined(CONFIG_BOARD_SPECIFIC_LED)
++			| STATUS_LED_BIT1
++#endif
++#if defined(STATUS_LED_BIT2) && defined(CONFIG_BOARD_SPECIFIC_LED)
++			| STATUS_LED_BIT2
++#endif
++#if defined(STATUS_LED_BIT3) && defined(CONFIG_BOARD_SPECIFIC_LED)
++			| STATUS_LED_BIT3
++#endif
++			;
++#ifdef CONFIG_BOARD_SPECIFIC_LED
++		__led_set(mask, state);
++#endif
++#ifdef STATUS_LED_RED
++		if (state == 0)
++			red_LED_off();
++		else
++			red_LED_on();
++#endif
++#ifdef STATUS_LED_GREEN
++		if (state == 0)
++			green_LED_off();
++		else
++			green_LED_on();
++#endif
++#ifdef STATUS_LED_YELLOW
++		if (state == 0)
++			yellow_LED_off();
++		else
++			yellow_LED_on();
++#endif
++#ifdef STATUS_LED_BLUE
++		if (state == 0)
++			blue_LED_off();
++		else
++			blue_LED_on();
++#endif
++	} else {
++		printf ("Usage:\n%s\n", cmdtp->usage);
++		return 1;
++	}
++
++	return 0;
++}
++
++U_BOOT_CMD(
++	led, 3, 1, do_led,
++	"led\t- ["
++#if defined(STATUS_LED_BIT) && defined(CONFIG_BOARD_SPECIFIC_LED)
++	"0|"
++#endif
++#if defined(STATUS_LED_BIT1) && defined(CONFIG_BOARD_SPECIFIC_LED)
++	"1|"
++#endif
++#if defined(STATUS_LED_BIT2) && defined(CONFIG_BOARD_SPECIFIC_LED)
++	"2|"
++#endif
++#if defined(STATUS_LED_BIT3) && defined(CONFIG_BOARD_SPECIFIC_LED)
++	"3|"
++#endif
++#ifdef STATUS_LED_GREEN
++	"green|"
++#endif
++#ifdef STATUS_LED_YELLOW
++	"yellow|"
++#endif
++#ifdef STATUS_LED_RED
++	"red|"
++#endif
++#ifdef STATUS_LED_BLUE
++	"blue|"
++#endif
++	"all] [on|off]\n",
++	"led [led_name] [on|off] sets or clears led(s)\n"
++);
++
+-- 
+1.5.6.4
+
diff --git a/recipes-bsp/u-boot/u-boot/0039-OMAP3-beagle-setenv-beaglerev-for-AxBx-Cx-xMA-for-be.patch b/recipes-bsp/u-boot/u-boot/0039-OMAP3-beagle-setenv-beaglerev-for-AxBx-Cx-xMA-for-be.patch
new file mode 100644
index 0000000..9b64327
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0039-OMAP3-beagle-setenv-beaglerev-for-AxBx-Cx-xMA-for-be.patch
@@ -0,0 +1,42 @@
+From c48581ecc0b060e4c1b5fa973d053e81e18f676b Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@dominion.thruhere.net>
+Date: Thu, 3 Jun 2010 19:50:57 +0200
+Subject: [PATCH 39/39] OMAP3: beagle: setenv beaglerev for AxBx/Cx/xMA for better bootscripts
+
+---
+ board/ti/beagle/beagle.c |    4 ++++
+ 1 files changed, 4 insertions(+), 0 deletions(-)
+
+diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
+index 556e995..cdba3dd 100644
+--- a/board/ti/beagle/beagle.c
++++ b/board/ti/beagle/beagle.c
+@@ -221,14 +221,17 @@ int misc_init_r(void)
+ 	case REVISION_AXBX:
+ 		printf("Beagle Rev Ax/Bx\n");
+ 		setenv("mpurate", "600");
++		setenv("beaglerev", "AxBx");
+ 		break;
+ 	case REVISION_CX:
+ 		printf("Beagle Rev C1/C2/C3\n");
+ 		MUX_BEAGLE_C();
+ 		setenv("mpurate", "600");
++		setenv("beaglerev", "Cx");
+ 		break;
+ 	case REVISION_C4:
+ 		printf("Beagle Rev C4\n");
++		setenv("beaglerev", "Cx");
+ 		MUX_BEAGLE_C();
+ 		/* Set VAUX2 to 1.8V for EHCI PHY */
+ 		twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
+@@ -239,6 +242,7 @@ int misc_init_r(void)
+ 		break;
+ 	case REVISION_XM:
+ 		printf("Beagle xM Rev A\n");
++		setenv("beaglerev", "xMA");
+ 		MUX_BEAGLE_XM();
+ 		/* Set VAUX2 to 1.8V for EHCI PHY */
+ 		twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0041-BeagleBoard-Enabled-LEDs.patch b/recipes-bsp/u-boot/u-boot/0041-BeagleBoard-Enabled-LEDs.patch
new file mode 100644
index 0000000..8b04619
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0041-BeagleBoard-Enabled-LEDs.patch
@@ -0,0 +1,47 @@
+From 9d3e56ba351348b6329c488a981d3e2d8f848164 Mon Sep 17 00:00:00 2001
+From: Jason Kridner <jkridner@beagleboard.org>
+Date: Wed, 19 May 2010 05:14:43 -0500
+Subject: [PATCH] BeagleBoard: Enabled LEDs
+
+Added LED driver using status_led.  USR0 is set to monitor the boot
+status.  USR1 is set to be the GREEN LED.
+
+Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
+---
+ include/configs/omap3_beagle.h |   13 +++++++++++++
+ 1 files changed, 13 insertions(+), 0 deletions(-)
+
+diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
+index c2fc6ba..eaa8779 100644
+--- a/include/configs/omap3_beagle.h
++++ b/include/configs/omap3_beagle.h
+@@ -98,6 +98,18 @@
+ #define CONFIG_SYS_MMC_SET_DEV		1
+ #define CONFIG_DOS_PARTITION		1
+ 
++/* Status LED */
++#define CONFIG_STATUS_LED		1
++#define CONFIG_BOARD_SPECIFIC_LED	1
++#define STATUS_LED_BIT			0x01
++#define STATUS_LED_STATE		STATUS_LED_ON
++#define STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 2)
++#define STATUS_LED_BIT1			0x02
++#define STATUS_LED_STATE1		STATUS_LED_ON
++#define STATUS_LED_PERIOD1		(CONFIG_SYS_HZ / 2)
++#define STATUS_LED_BOOT			STATUS_LED_BIT
++#define STATUS_LED_GREEN		STATUS_LED_BIT1
++
+ /* DDR - I use Micron DDR */
+ #define CONFIG_OMAP3_MICRON_DDR		1
+ 
+@@ -132,6 +144,7 @@
+ #define CONFIG_CMD_I2C		/* I2C serial bus support	*/
+ #define CONFIG_CMD_MMC		/* MMC support			*/
+ #define CONFIG_CMD_NAND		/* NAND support			*/
++#define CONFIG_CMD_LED		/* LED support			*/
+ #define CONFIG_VIDEO_OMAP3	/* DSS Support			*/
+ 
+ #undef CONFIG_CMD_FLASH		/* flinfo, erase, protect	*/
+-- 
+1.5.6.4
+
diff --git a/recipes-bsp/u-boot/u-boot/0042-BeagleBoard-New-command-for-status-of-USER-button.patch b/recipes-bsp/u-boot/u-boot/0042-BeagleBoard-New-command-for-status-of-USER-button.patch
new file mode 100644
index 0000000..9a704a8
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0042-BeagleBoard-New-command-for-status-of-USER-button.patch
@@ -0,0 +1,97 @@
+From c053723cc5a73781a4954e6c93d280436623e3d6 Mon Sep 17 00:00:00 2001
+From: Jason Kridner <jkridner@beagleboard.org>
+Date: Wed, 21 Jul 2010 07:41:25 -0500
+Subject: [PATCH] BeagleBoard: Added userbutton command
+
+Based on commit f1099c7c43caf5bac3bf6a65aa266fade4747072
+    Author: Greg Turner <gregturner@ti.com>
+    Date:   Tue May 25 09:19:06 2010 -0500
+
+    New u-boot command for status of USER button on BeagleBoard-xM
+
+         Modified bootcmd to check the staus at boot time and set
+	 filename of the boot script.
+
+* Moved to a BeagleBoard specific file.
+* Removed changes to default boot command from adding userbutton
+  command.
+* Made to handle pre-xM boards.
+* Flipped polarity of the return value to avoid confusion.  Success (0)
+  is when the button is pressed.  Failure (1) is when the button is NOT
+  pressed.
+---
+ board/ti/beagle/beagle.c |   54 ++++++++++++++++++++++++++++++++++++++++++++++
+ 1 files changed, 54 insertions(+), 0 deletions(-)
+
+diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
+index a6a4961..66df719 100644
+--- a/board/ti/beagle/beagle.c
++++ b/board/ti/beagle/beagle.c
+@@ -40,6 +40,7 @@
+ #include <asm/arch/gpio.h>
+ #include <asm/mach-types.h>
+ #include "beagle.h"
++#include <command.h>
+ 
+ static struct {
+ 	unsigned int device_vendor;
+@@ -290,3 +291,56 @@ void set_muxconf_regs(void)
+ 	MUX_BEAGLE();
+ }
+ 
++/*
++ * This command returns the status of the user button on beagle xM
++ * Input - none
++ * Returns - 	1 if button is held down
++ *		0 if button is not held down
++ */
++int do_userbutton (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
++{
++	int     button = 0;
++	int	gpio;
++
++	/*
++	 * pass address parameter as argv[0] (aka command name),
++	 * and all remaining args
++	 */
++	switch (beagle_revision) {
++	case REVISION_AXBX:
++	case REVISION_CX:
++	case REVISION_C4:
++		gpio = 7;
++		break;
++	case REVISION_XM:
++	default:
++		gpio = 4;
++		break;
++	}
++	omap_request_gpio(gpio);
++	omap_set_gpio_direction(gpio, 1);
++	printf("The user button is currently ");
++	if(omap_get_gpio_datain(gpio))
++	{
++		button = 1;
++		printf("PRESSED.\n");
++	}
++	else
++	{
++		button = 0;
++		printf("NOT pressed.\n");
++	}
++
++	omap_free_gpio(gpio);
++
++	return !button;
++}
++
++/* -------------------------------------------------------------------- */
++
++U_BOOT_CMD(
++	userbutton, CONFIG_SYS_MAXARGS, 1,	do_userbutton,
++	"Return the status of the BeagleBoard USER button",
++	""
++);
++
+-- 
+1.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0043-BeagleBoard-Add-CONFIG_SYS_MEMTEST_SCRATCH.patch b/recipes-bsp/u-boot/u-boot/0043-BeagleBoard-Add-CONFIG_SYS_MEMTEST_SCRATCH.patch
new file mode 100644
index 0000000..fa6bb48
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0043-BeagleBoard-Add-CONFIG_SYS_MEMTEST_SCRATCH.patch
@@ -0,0 +1,35 @@
+From d912a6d2d546faf55d07e91816b47096879137cc Mon Sep 17 00:00:00 2001
+From: Steven Kipisz <s-kipisz2@ti.com>
+Date: Fri, 4 Jun 2010 10:31:04 -0500
+Subject: [PATCH] BeagleBoard: Add CONFIG_SYS_MEMTEST_SCRATCH
+
+Add CONFIG_SYS_MEMTEST_SCRATCH to point to a scratch memory area.
+
+Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
+---
+ include/configs/omap3_beagle.h |    9 +++++----
+ 1 files changed, 5 insertions(+), 4 deletions(-)
+
+diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
+index 555b350..0c6fce6 100644
+--- a/include/configs/omap3_beagle.h
++++ b/include/configs/omap3_beagle.h
+@@ -297,10 +297,11 @@
+ /* Boot Argument Buffer Size */
+ #define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
+ 
+-#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)	/* memtest */
+-								/* works on */
+-#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
+-					0x01F00000) /* 31MB */
++#define CONFIG_SYS_ALT_MEMTEST		1
++#define CONFIG_SYS_MEMTEST_START	(0x82000000)		/* memtest */
++								/* defaults */
++#define CONFIG_SYS_MEMTEST_END		(0x87FFFFFF) 		/* 128MB */
++#define CONFIG_SYS_MEMTEST_SCRATCH	(0x81000000)	/* dummy address */
+ 
+ #define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0)	/* default */
+ 							/* load address */
+-- 
+1.5.6.4
+
diff --git a/recipes-bsp/u-boot/u-boot/0044-Beagleboard-Adjust-boot.patch b/recipes-bsp/u-boot/u-boot/0044-Beagleboard-Adjust-boot.patch
new file mode 100644
index 0000000..19b4ab7
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0044-Beagleboard-Adjust-boot.patch
@@ -0,0 +1,115 @@
+From c8d52ff17d71be0c632f20092d96e9530088c786 Mon Sep 17 00:00:00 2001
+From: Jason Kridner <jkridner@beagleboard.org>
+Date: Wed, 21 Jul 2010 08:47:59 -0500
+Subject: [PATCH] BeagleBoard: Adjust boot command on USER button
+
+When the USER button is pressed, the default boot command will attempt
+to load user.scr.  If that fails, it will try to load a ramdisk image.
+
+This version also sets the rootfstype and assumes that the userbutton
+command returns success (0) when the button is pressed.  It also really
+attempts to load the user.scr file.
+---
+ include/configs/omap3_beagle.h |   51 ++++++++++++++++++++++++++++++++++-----
+ 1 files changed, 44 insertions(+), 7 deletions(-)
+
+diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
+index f372de2..6d1166f 100644
+--- a/include/configs/omap3_beagle.h
++++ b/include/configs/omap3_beagle.h
+@@ -195,9 +195,12 @@
+ #define CONFIG_BOOTDELAY		3
+ 
+ #define CONFIG_EXTRA_ENV_SETTINGS \
+-	"loadaddr=0x82000000\0" \
++	"loadaddr=0x80200000\0" \
++	"rdaddr=0x81600000\0" \
+ 	"usbtty=cdc_acm\0" \
+ 	"console=ttyS2,115200n8\0" \
++	"optargs=\0" \
++	"bootscr=boot.scr\0" \
+ 	"mpurate=500\0" \
+ 	"buddy=none\0" \
+ 	"vram=12M\0" \
+@@ -208,7 +211,10 @@
+ 	"mmcrootfstype=ext3 rootwait\0" \
+ 	"nandroot=/dev/mtdblock4 rw\0" \
+ 	"nandrootfstype=jffs2\0" \
++	"ramroot=/dev/ram0 rw\0" \
++	"ramrootfstype=ext2\0" \
+ 	"mmcargs=setenv bootargs console=${console} " \
++		"${optargs} " \
+ 		"mpurate=${mpurate} " \
+ 		"buddy=${buddy} "\
+ 		"vram=${vram} " \
+@@ -217,6 +223,7 @@
+ 		"root=${mmcroot} " \
+ 		"rootfstype=${mmcrootfstype}\0" \
+ 	"nandargs=setenv bootargs console=${console} " \
++		"${optargs} " \
+ 		"mpurate=${mpurate} " \
+ 		"buddy=${buddy} "\
+ 		"vram=${vram} " \
+@@ -224,7 +231,18 @@
+ 		"omapdss.def_disp=${defaultdisplay} " \
+ 		"root=${nandroot} " \
+ 		"rootfstype=${nandrootfstype}\0" \
+-	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
++	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} ${bootscr}\0" \
++	"ramargs=setenv bootargs console=${console} " \
++		"${optargs} " \
++		"mpurate=${mpurate} " \
++		"buddy=${buddy} "\
++		"vram=${vram} " \
++		"omapfb.mode=dvi:${dvimode} " \
++		"omapdss.def_disp=${defaultdisplay} " \
++		"root=${ramroot} rw ramdisk_size=65536 " \
++		"initrd=${rdaddr},64M " \
++		"rootfstype=${ramrootfstype}\0" \
++	"loadramdisk=fatload mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
+ 	"bootscript=echo Running bootscript from mmc ...; " \
+ 		"source ${loadaddr}\0" \
+ 	"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
+@@ -235,15 +253,34 @@
+ 		"run nandargs; " \
+ 		"nand read ${loadaddr} 280000 400000; " \
+ 		"bootm ${loadaddr}\0" \
++	"ramboot=echo Booting from ramdisk ...; " \
++		"run ramargs; " \
++		"bootm ${loadaddr}\0" \
+ 
+ #define CONFIG_BOOTCOMMAND \
+ 	"if mmc init ${mmcdev}; then " \
+-		"if run loadbootscript; then " \
+-			"run bootscript; " \
++		"if userbutton; then " \
++			"setenv bootscr user.scr;" \
++			"if run loadbootscript; then " \
++				"run bootscript; " \
++			"else " \
++				"if run loaduimage; then " \
++					"if run loadramdisk; then " \
++						"run ramboot; " \
++					"else " \
++						"run mmcboot; " \
++					"fi; " \
++				"fi; " \
++			"fi; " \
+ 		"else " \
+-			"if run loaduimage; then " \
+-				"run mmcboot; " \
+-			"else run nandboot; " \
++			"setenv bootscr boot.scr; " \
++			"if run loadbootscript; then " \
++				"run bootscript; " \
++			"else " \
++				"if run loaduimage; then " \
++					"run mmcboot; " \
++				"else run nandboot; " \
++				"fi; " \
+ 			"fi; " \
+ 		"fi; " \
+ 	"else run nandboot; fi"
+-- 
+1.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0045-BeagleBoard-Enable-pullups-on-i2c2.patch b/recipes-bsp/u-boot/u-boot/0045-BeagleBoard-Enable-pullups-on-i2c2.patch
new file mode 100644
index 0000000..ea3ab74
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0045-BeagleBoard-Enable-pullups-on-i2c2.patch
@@ -0,0 +1,46 @@
+From bf4b655c6c02bbf95bd6ebbf820e53dbd8eb4803 Mon Sep 17 00:00:00 2001
+From: Steve Kipisz <s-kipisz2@ti.com>
+Date: Thu, 5 Aug 2010 10:36:07 -0500
+Subject: [PATCH] BeagleBoard: Enable pullups on i2c2.
+
+---
+ board/ti/beagle/beagle.c           |    2 ++
+ include/asm-arm/arch-omap3/omap3.h |    9 +++++++++
+ 2 files changed, 11 insertions(+), 0 deletions(-)
+
+diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
+index cdba3dd..eeb37bc 100644
+--- a/board/ti/beagle/beagle.c
++++ b/board/ti/beagle/beagle.c
+@@ -163,6 +163,8 @@ int misc_init_r(void)
+ 	struct gpio *gpio5_base = (struct gpio *)OMAP34XX_GPIO5_BASE;
+ 	struct gpio *gpio6_base = (struct gpio *)OMAP34XX_GPIO6_BASE;
+ 
++	/* Enable i22 pullup resisters */
++	*(ulong *)(CONTROL_PROG_IO1) &= ~(PRG_I2C2_PULLUPRESX);
+ 	beagle_identify();
+ 
+ 	printf("\nProbing for expansion boards, if none are connected you'll see a harmless I2C error.\n\n");
+diff --git a/include/asm-arm/arch-omap3/omap3.h b/include/asm-arm/arch-omap3/omap3.h
+index 3957c79..1860dff 100644
+--- a/include/asm-arm/arch-omap3/omap3.h
++++ b/include/asm-arm/arch-omap3/omap3.h
+@@ -50,6 +50,15 @@
+ /* CONTROL */
+ #define OMAP34XX_CTRL_BASE		(OMAP34XX_L4_IO_BASE + 0x2000)
+ 
++/* Signal Integrity Parameter Control Registers */
++#define CONTROL_PROG_IO0		0x48002444
++#define CONTROL_PROG_IO1		0x48002448
++#define CONTROL_PROG_IO2		0x48002408
++#define CONTROL_PROG_IO_WKUP1		0x48002A80
++
++/* Bit definition for CONTROL_PROG_IO1 */
++#define PRG_I2C2_PULLUPRESX		0x00000001
++
+ /* UART */
+ #define OMAP34XX_UART1			(OMAP34XX_L4_IO_BASE + 0x6a000)
+ #define OMAP34XX_UART2			(OMAP34XX_L4_IO_BASE + 0x6c000)
+-- 
+1.6.6.1
+
diff --git a/recipes-bsp/u-boot/u-boot/0046-BeagleBoard-Add-camera-to-default-bootargs.patch b/recipes-bsp/u-boot/u-boot/0046-BeagleBoard-Add-camera-to-default-bootargs.patch
new file mode 100644
index 0000000..f999f7f
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/0046-BeagleBoard-Add-camera-to-default-bootargs.patch
@@ -0,0 +1,50 @@
+From 519ecc8a8f441d30e55c7e4552c63e2363fa6dd5 Mon Sep 17 00:00:00 2001
+From: Jason Kridner <jkridner@beagleboard.org>
+Date: Thu, 5 Aug 2010 13:54:12 -0500
+Subject: [PATCH] BeagleBoard: Add camera to default bootargs
+
+
+Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
+---
+ include/configs/omap3_beagle.h |    4 ++++
+ 1 files changed, 4 insertions(+), 0 deletions(-)
+
+diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
+index 1a76004..48ad805 100644
+--- a/include/configs/omap3_beagle.h
++++ b/include/configs/omap3_beagle.h
+@@ -208,6 +208,7 @@
+ 	"bootscr=boot.scr\0" \
+ 	"mpurate=500\0" \
+ 	"buddy=none\0" \
++	"camera=lbcm3m1\0" \
+ 	"vram=12M\0" \
+ 	"dvimode=640x480MR-16@60\0" \
+ 	"defaultdisplay=dvi\0" \
+@@ -222,6 +223,7 @@
+ 		"${optargs} " \
+ 		"mpurate=${mpurate} " \
+ 		"buddy=${buddy} "\
++		"camera=${camera} "\
+ 		"vram=${vram} " \
+ 		"omapfb.mode=dvi:${dvimode} " \
+ 		"omapdss.def_disp=${defaultdisplay} " \
+@@ -231,6 +233,7 @@
+ 		"${optargs} " \
+ 		"mpurate=${mpurate} " \
+ 		"buddy=${buddy} "\
++		"camera=${camera} "\
+ 		"vram=${vram} " \
+ 		"omapfb.mode=dvi:${dvimode} " \
+ 		"omapdss.def_disp=${defaultdisplay} " \
+@@ -241,6 +244,7 @@
+ 		"${optargs} " \
+ 		"mpurate=${mpurate} " \
+ 		"buddy=${buddy} "\
++		"camera=${camera} "\
+ 		"vram=${vram} " \
+ 		"omapfb.mode=dvi:${dvimode} " \
+ 		"omapdss.def_disp=${defaultdisplay} " \
+-- 
+1.5.6.4
+
diff --git a/recipes-bsp/u-boot/u-boot/fw_env.config b/recipes-bsp/u-boot/u-boot/fw_env.config
new file mode 100644
index 0000000..d9112c2
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot/fw_env.config
@@ -0,0 +1,8 @@
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+# Notice, that the "Number of sectors" is ignored on NOR.
+
+# MTD device name	Device offset	Env. size	Flash sector size	Number of sectors
+/dev/mtd2		0x0000		0x20000		0x20000
+
diff --git a/recipes-bsp/u-boot/u-boot_git.bb b/recipes-bsp/u-boot/u-boot_git.bb
new file mode 100644
index 0000000..3750863
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot_git.bb
@@ -0,0 +1,62 @@
+require u-boot.inc
+PR ="r65"
+
+FILESPATHPKG =. "u-boot-git:"
+
+SRC_URI = "git://www.denx.de/git/u-boot.git;protocol=git \
+                       file://0001-OMAP3-enable-i2c-bus-switching-for-Beagle-and-Overo.patch \
+                       file://0002-OMAP3-add-board-revision-detection-for-Overo.patch \
+                       file://0003-OMAP3-update-Beagle-revision-detection-to-recognize-.patch \
+                       file://0004-OMAP3-Set-VAUX2-to-1.8V-for-EHCI-PHY-on-Beagle-Rev-C.patch \
+                       file://0005-OMAP3-add-entry-for-rev-3.1.2-check-and-display-max-.patch \
+                       file://0006-OMAP3-add-mpurate-boot-arg-for-overo-and-beagle.patch \
+                       file://0007-OMAP3-detect-expansion-board-type-version-using-eepr.patch \
+                       file://0008-OMAP3-Overo-enable-config-eeprom-to-set-u-boot-env-v.patch \
+                       file://0009-OMAP3-Overo-enable-input-on-MMC1_CLK-and-MMC3_CLK-pi.patch \
+                       file://0010-OMAP3-Overo-set-CONFIG_SYS_I2C_SPEED-to-400Khz.patch \
+                       file://0011-OMAP3-trim-excessively-long-delays-in-i2c-driver.patch \
+                       file://0012-OMAP3-Overo-allow-expansion-boards-with-any-vendor-I.patch \
+                       file://0013-OMAP3-Overo-change-address-of-expansion-eeprom-to-0x.patch \
+                       file://0014-OMAP3-board.c-don-t-attempt-to-set-up-second-RAM-ban.patch \
+                       file://0015-OMAP3-mem.c-enhance-the-RAM-test.patch \
+                       file://0016-env_nand.c-fail-gracefully-if-no-nand-is-present.patch \
+                       file://0017-OMAP3-add-definitions-to-support-sysinfo-cpu-and-cpu.patch \
+                       file://0018-OMAP3-sys_info-update-cpu-detection-for-36XX-37XX.patch \
+                       file://0019-OMAP3-clocks-update-clock-setup-for-36XX-37XX.patch \
+                       file://0020-OMAP3-beagle-add-support-for-Beagle-xM.patch \
+                       file://0021-OMAP3-Beagle-Overo-remove-omapfb.debug-y-from-defaul.patch \
+                       file://0022-OMAP3-beagle-implement-expansionboard-detection-base.patch \
+                       file://0023-beagleboard-display-message-about-I2C-errors-being-e.patch \
+                       file://0024-beagleboard-fix-TCT-expansionboard-IDs.patch \
+                       file://0025-Add-DSS-driver-for-OMAP3.patch \
+                       file://0026-Enable-DSS-driver-for-Beagle.patch \
+                       file://0027-beagleboardXM-don-t-set-mpurate-on-xM-in-bootargs.patch \
+                       file://0028-OMAP3-fix-and-clean-up-L2-cache-enable-disable-funct.patch \
+                       file://0029-OMAP3-convert-setup_auxcr-to-pure-asm.patch \
+                       file://0030-OMAP3-apply-Cortex-A8-errata-workarounds-only-on-aff.patch \
+                       file://0031-OMAP3-beagle-add-more-expansionboards-based-on-http-.patch \
+                       file://0032-OMAP3-beagle-set-mpurate-to-600-for-revB-and-revC1-3.patch \
+                       file://0033-OMAP3-beagle-prettify-expansionboard-message-a-bit.patch \
+                       file://0034-OMAP3-beagle-add-pinmux-for-Tincantools-Trainer-expa.patch \
+                       file://0035-OMAP3-Beagle-set-mpurate-to-1000-for-xM.patch \
+                       file://0036-OMAP3-Beagle-decrease-bootdelay-to-3-use-VGA-for-def.patch \
+                       file://0037-OMAP3-beagle-pass-expansionboard-name-in-bootargs.patch \
+                       file://0038-Added-configurations-for-xM-Rev-A-board.patch \
+                       file://0039-OMAP3-beagle-setenv-beaglerev-for-AxBx-Cx-xMA-for-be.patch \
+                       file://0001-OMAP-mmc-add-support-for-second-and-third-mmc-chan.patch \
+                       file://0001-OMAP3-Beagle-enable-support-for-second-and-third-m.patch \
+                       file://0038-BeagleBoard-Added-LED-driver.patch \
+                       file://0039-Add-led-command.patch \
+                       file://0041-BeagleBoard-Enabled-LEDs.patch \
+                       file://0042-BeagleBoard-New-command-for-status-of-USER-button.patch \
+                       file://0043-BeagleBoard-Add-CONFIG_SYS_MEMTEST_SCRATCH.patch \
+                       file://0044-Beagleboard-Adjust-boot.patch \
+                       file://0045-BeagleBoard-Enable-pullups-on-i2c2.patch \
+                       file://0046-BeagleBoard-Add-camera-to-default-bootargs.patch \
+		       file://0001-BeagleBoard-move-ramdisk-parameters.patch \
+                       file://fw_env.config \
+"
+SRCREV = "ca6e1c136ddb720c3bb2cc043b99f7f06bc46c55"
+PV = "2010.03+${PR}+gitr${SRCREV}"
+
+S = "${WORKDIR}/git"
diff --git a/recipes-bsp/x-load/signgp.bb b/recipes-bsp/x-load/signgp.bb
new file mode 100644
index 0000000..8535c53
--- /dev/null
+++ b/recipes-bsp/x-load/signgp.bb
@@ -0,0 +1,19 @@
+LICENSE = "NewBSD"
+DESCRIPTION = "Tool to sign omap3 x-loader images"
+
+PR = "r4"
+
+SRC_URI = "file://signGP.c"
+
+do_compile() {
+	${CC} ${CFLAGS} ${LDFLAGS} ${WORKDIR}/signGP.c -o signGP
+}
+
+do_install() {
+	install -d ${D}${bindir}
+	install -m 0755 signGP ${D}${bindir}
+}
+
+NATIVE_INSTALL_WORKS = "1"
+
+BBCLASSEXTEND = "native nativesdk"
diff --git a/recipes-bsp/x-load/signgp/signGP.c b/recipes-bsp/x-load/signgp/signGP.c
new file mode 100644
index 0000000..9325064
--- /dev/null
+++ b/recipes-bsp/x-load/signgp/signGP.c
@@ -0,0 +1,108 @@
+/*
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *
+ *    Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the
+ *    distribution.
+ *
+ *    Neither the name of Texas Instruments Incorporated nor the names of
+ *    its contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+*/
+
+
+//
+// signGP.c
+// Read the x-load.bin file and write out the x-load.bin.ift file.
+// The signed image is the original pre-pended with the size of the image
+// and the load address.  If not entered on command line, file name is
+// assumed to be x-load.bin in current directory and load address is
+// 0x40200800.
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+#include <string.h>
+#include <malloc.h>
+
+
+main(int argc, char *argv[])
+{
+	int	i;
+	char	ifname[FILENAME_MAX], ofname[FILENAME_MAX], ch;
+	FILE	*ifile, *ofile;
+	unsigned long	loadaddr, len;
+	struct stat	sinfo;
+
+
+	// Default to x-load.bin and 0x40200800.
+	strcpy(ifname, "x-load.bin");
+	loadaddr = 0x40200800;
+
+	if ((argc == 2) || (argc == 3))
+		strcpy(ifname, argv[1]);
+
+	if (argc == 3)
+		loadaddr = strtol(argv[2], NULL, 16);
+
+	// Form the output file name.
+	strcpy(ofname, ifname);
+	strcat(ofname, ".ift");
+
+	// Open the input file.
+	ifile = fopen(ifname, "rb");
+	if (ifile == NULL) {
+		printf("Cannot open %s\n", ifname);
+		exit(0);
+	}
+
+	// Get file length.
+	stat(ifname, &sinfo);
+	len = sinfo.st_size;
+
+	// Open the output file and write it.
+	ofile = fopen(ofname, "wb");
+	if (ofile == NULL) {
+		printf("Cannot open %s\n", ofname);
+		fclose(ifile);
+		exit(0);
+	}
+
+	// Pad 1 sector of zeroes.
+	//ch = 0x00;
+	//for (i=0; i<0x200; i++)
+	//	fwrite(&ch, 1, 1, ofile);
+
+	fwrite(&len, 1, 4, ofile);
+	fwrite(&loadaddr, 1, 4, ofile);
+	for (i=0; i<len; i++) {
+		fread(&ch, 1, 1, ifile);
+		fwrite(&ch, 1, 1, ofile);
+	}
+
+	fclose(ifile);
+	fclose(ofile);
+}
diff --git a/recipes-bsp/x-load/x-load-git/bb8547fcbc54ecc7a75f9ad45a31042a04d8a2ce.patch b/recipes-bsp/x-load/x-load-git/bb8547fcbc54ecc7a75f9ad45a31042a04d8a2ce.patch
new file mode 100644
index 0000000..d447fd0
--- /dev/null
+++ b/recipes-bsp/x-load/x-load-git/bb8547fcbc54ecc7a75f9ad45a31042a04d8a2ce.patch
@@ -0,0 +1,35 @@
+From bb8547fcbc54ecc7a75f9ad45a31042a04d8a2ce Mon Sep 17 00:00:00 2001
+From: Laine Walker-Avina <lwalkera@ieee.org>
+Date: Tue, 13 Apr 2010 13:27:31 -0700
+Subject: [PATCH] FAT: Find the start of the first partition in a non-hardcoded way
+
+---
+ fs/fat/fat.c |   12 +++++-------
+ 1 files changed, 5 insertions(+), 7 deletions(-)
+
+diff --git a/fs/fat/fat.c b/fs/fat/fat.c
+index eb754c0..c6bdb13 100644
+--- a/fs/fat/fat.c
++++ b/fs/fat/fat.c
+@@ -145,13 +145,11 @@ fat_register_device(block_dev_desc_t *dev_desc, int part_no)
+ 			return -1;
+ 		}
+ #else
+-		/* FIXME we need to determine the start block of the
+-		 * partition where the DOS FS resides. This can be done
+-		 * by using the get_partition_info routine. For this
+-		 * purpose the libpart must be included.
+-		 */
+-		part_offset=63;
+-		//part_offset=0;
++		part_offset = buffer[DOS_PART_TBL_OFFSET+8]      |
++		              buffer[DOS_PART_TBL_OFFSET+9] <<8  |
++		              buffer[DOS_PART_TBL_OFFSET+10]<<16 |
++		              buffer[DOS_PART_TBL_OFFSET+11]<<24;
++
+ 		cur_part = 1;
+ #endif
+ 	}
+-- 
+1.6.1
+
diff --git a/recipes-bsp/x-load/x-load-git/name.patch b/recipes-bsp/x-load/x-load-git/name.patch
new file mode 100644
index 0000000..1a7aa56
--- /dev/null
+++ b/recipes-bsp/x-load/x-load-git/name.patch
@@ -0,0 +1,13 @@
+--- git/Makefile-orig	2010-03-08 06:56:36.000000000 -0800
++++ git/Makefile	2010-03-08 06:56:52.000000000 -0800
+@@ -153,8 +153,8 @@ omap3evm_config :	unconfig
+ overo_config :	unconfig
+ 	@./mkconfig $(@:_config=) arm omap3 overo
+ 
+-omap3530beagle_config :    unconfig
+-	@./mkconfig $(@:_config=) arm omap3 omap3530beagle
++beagleboard_config :    unconfig
++	@./mkconfig omap3530beagle arm omap3 omap3530beagle
+ 
+ #########################################################################
+ 
diff --git a/recipes-bsp/x-load/x-load-git/xm-mem.patch b/recipes-bsp/x-load/x-load-git/xm-mem.patch
new file mode 100644
index 0000000..d038faf
--- /dev/null
+++ b/recipes-bsp/x-load/x-load-git/xm-mem.patch
@@ -0,0 +1,237 @@
+From a25b926ff963a1866e26b11a4dac742564618375 Mon Sep 17 00:00:00 2001
+From: Steve Kipisz <s-kipisz2@ti.com>
+Date: Thu, 8 Jul 2010 10:30:58 -0500
+Subject: [PATCH] Support Micron or Numonyx memory
+
+* Updated Numonyx memory size.
+---
+ board/omap3530beagle/omap3530beagle.c |   56 +++++++++++++++++++++++++++-----
+ drivers/k9f1g08r0a.c                  |   43 +++++++++++++++++++------
+ include/asm/arch-omap3/mem.h          |   43 ++++++++++++++++++++++++-
+ 3 files changed, 121 insertions(+), 21 deletions(-)
+
+diff --git a/board/omap3530beagle/omap3530beagle.c b/board/omap3530beagle/omap3530beagle.c
+index eb8008e..1b3d8c7 100644
+--- a/board/omap3530beagle/omap3530beagle.c
++++ b/board/omap3530beagle/omap3530beagle.c
+@@ -265,6 +265,32 @@ u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound)
+ }
+ 
+ #ifdef CFG_3430SDRAM_DDR
++
++#define MICRON_DDR	0
++#define NUMONYX_MCP	1
++int identify_xm_ddr()
++{
++	int	mfr, id;
++
++	__raw_writel(M_NAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0);
++	__raw_writel(M_NAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0);
++	__raw_writel(M_NAND_GPMC_CONFIG3, GPMC_CONFIG3 + GPMC_CONFIG_CS0);
++	__raw_writel(M_NAND_GPMC_CONFIG4, GPMC_CONFIG4 + GPMC_CONFIG_CS0);
++	__raw_writel(M_NAND_GPMC_CONFIG5, GPMC_CONFIG5 + GPMC_CONFIG_CS0);
++	__raw_writel(M_NAND_GPMC_CONFIG6, GPMC_CONFIG6 + GPMC_CONFIG_CS0);
++
++	/* Enable the GPMC Mapping */
++	__raw_writel((((OMAP34XX_GPMC_CS0_SIZE & 0xF)<<8) |
++			     ((NAND_BASE_ADR>>24) & 0x3F) |
++			     (1<<6)),  (GPMC_CONFIG7 + GPMC_CONFIG_CS0));
++	delay(2000);
++
++	nand_readid(&mfr, &id);
++	if (mfr == 0)
++		return MICRON_DDR;
++	if ((mfr == 0x20) && (id == 0xba))
++		return NUMONYX_MCP;
++}
+ /*********************************************************************
+  * config_3430sdram_ddr() - Init DDR on 3430SDP dev board.
+  *********************************************************************/
+@@ -279,15 +305,27 @@ void config_3430sdram_ddr(void)
+ 	__raw_writel(SDP_SDRC_SHARING, SDRC_SHARING);
+ 
+ 	if (beagle_revision() == REVISION_XM) {
+-		__raw_writel(0x2, SDRC_CS_CFG); /* 256MB/bank */
+-		__raw_writel(SDP_SDRC_MDCFG_0_DDR_XM, SDRC_MCFG_0);
+-		__raw_writel(SDP_SDRC_MDCFG_0_DDR_XM, SDRC_MCFG_1);
+-		__raw_writel(MICRON_V_ACTIMA_200, SDRC_ACTIM_CTRLA_0);
+-		__raw_writel(MICRON_V_ACTIMB_200, SDRC_ACTIM_CTRLB_0);
+-		__raw_writel(MICRON_V_ACTIMA_200, SDRC_ACTIM_CTRLA_1);
+-		__raw_writel(MICRON_V_ACTIMB_200, SDRC_ACTIM_CTRLB_1);
+-		__raw_writel(SDP_3430_SDRC_RFR_CTRL_200MHz, SDRC_RFR_CTRL_0);
+-		__raw_writel(SDP_3430_SDRC_RFR_CTRL_200MHz, SDRC_RFR_CTRL_1);
++		if (identify_xm_ddr() == MICRON_DDR) {
++			__raw_writel(0x2, SDRC_CS_CFG); /* 256MB/bank */
++			__raw_writel(SDP_SDRC_MDCFG_0_DDR_MICRON_XM, SDRC_MCFG_0);
++			__raw_writel(SDP_SDRC_MDCFG_0_DDR_MICRON_XM, SDRC_MCFG_1);
++			__raw_writel(MICRON_V_ACTIMA_200, SDRC_ACTIM_CTRLA_0);
++			__raw_writel(MICRON_V_ACTIMB_200, SDRC_ACTIM_CTRLB_0);
++			__raw_writel(MICRON_V_ACTIMA_200, SDRC_ACTIM_CTRLA_1);
++			__raw_writel(MICRON_V_ACTIMB_200, SDRC_ACTIM_CTRLB_1);
++			__raw_writel(SDP_3430_SDRC_RFR_CTRL_200MHz, SDRC_RFR_CTRL_0);
++			__raw_writel(SDP_3430_SDRC_RFR_CTRL_200MHz, SDRC_RFR_CTRL_1);
++		} else {
++			__raw_writel(0x4, SDRC_CS_CFG); /* 512MB/bank */
++			__raw_writel(SDP_SDRC_MDCFG_0_DDR_NUMONYX_XM, SDRC_MCFG_0);
++			__raw_writel(SDP_SDRC_MDCFG_0_DDR_NUMONYX_XM, SDRC_MCFG_1);
++			__raw_writel(NUMONYX_V_ACTIMA_165, SDRC_ACTIM_CTRLA_0);
++			__raw_writel(NUMONYX_V_ACTIMB_165, SDRC_ACTIM_CTRLB_0);
++			__raw_writel(NUMONYX_V_ACTIMA_165, SDRC_ACTIM_CTRLA_1);
++			__raw_writel(NUMONYX_V_ACTIMB_165, SDRC_ACTIM_CTRLB_1);
++			__raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_0);
++			__raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_1);
++		}
+ 	} else {
+ 		__raw_writel(0x1, SDRC_CS_CFG); /* 128MB/bank */
+ 		__raw_writel(SDP_SDRC_MDCFG_0_DDR, SDRC_MCFG_0);
+diff --git a/drivers/k9f1g08r0a.c b/drivers/k9f1g08r0a.c
+index 8968a1b..d2da804 100644
+--- a/drivers/k9f1g08r0a.c
++++ b/drivers/k9f1g08r0a.c
+@@ -154,6 +154,29 @@ static int NanD_Address(unsigned int numbytes, unsigned long ofs)
+ 	return 0;
+ }
+ 
++int nand_readid(int *mfr, int *id)
++{
++	NAND_ENABLE_CE();
++
++	if (NanD_Command(NAND_CMD_RESET)) {
++		NAND_DISABLE_CE();
++		return 1;
++	}
++ 
++	if (NanD_Command(NAND_CMD_READID)) {
++		NAND_DISABLE_CE();
++		return 1;
++	}
++ 
++	NanD_Address(ADDR_COLUMN, 0);
++
++	*mfr = READ_NAND(NAND_ADDR);
++	*id = READ_NAND(NAND_ADDR);
++
++	NAND_DISABLE_CE();
++	return 0;
++}
++
+ /* read chip mfr and id
+  * return 0 if they match board config
+  * return 1 if not
+@@ -162,23 +185,23 @@ int nand_chip()
+ {
+ 	int mfr, id;
+ 
+- 	NAND_ENABLE_CE();
++	NAND_ENABLE_CE();
+ 
+- 	if (NanD_Command(NAND_CMD_RESET)) {
+- 		printf("Err: RESET\n");
+- 		NAND_DISABLE_CE();   
++	if (NanD_Command(NAND_CMD_RESET)) {
++		printf("Err: RESET\n");
++		NAND_DISABLE_CE();   
+ 		return 1;
+ 	}
+  
+- 	if (NanD_Command(NAND_CMD_READID)) {
+- 		printf("Err: READID\n");
+- 		NAND_DISABLE_CE();
++	if (NanD_Command(NAND_CMD_READID)) {
++		printf("Err: READID\n");
++		NAND_DISABLE_CE();
+ 		return 1;
+- 	}
++	}
+  
+- 	NanD_Address(ADDR_COLUMN, 0);
++	NanD_Address(ADDR_COLUMN, 0);
+ 
+- 	mfr = READ_NAND(NAND_ADDR);
++	mfr = READ_NAND(NAND_ADDR);
+ 	id = READ_NAND(NAND_ADDR);
+ 
+ 	NAND_DISABLE_CE();
+diff --git a/include/asm/arch-omap3/mem.h b/include/asm/arch-omap3/mem.h
+index cba4c6f..63cdba1 100644
+--- a/include/asm/arch-omap3/mem.h
++++ b/include/asm/arch-omap3/mem.h
+@@ -46,6 +46,7 @@ typedef enum {
+ #define MMC_NAND            4
+ #define MMC_ONENAND         5
+ #define GPMC_NONE           6
++#define GPMC_ONENAND_TRY    7
+ 
+ #endif
+ 
+@@ -71,7 +72,8 @@ typedef enum {
+ #define SDP_SDRC_MDCFG_0_DDR	(0x02582019|B_ALL) /* Infin ddr module */
+ #else
+ #define SDP_SDRC_MDCFG_0_DDR	(0x02584019|B_ALL)
+-#define SDP_SDRC_MDCFG_0_DDR_XM	(0x03588019|B_ALL)
++#define SDP_SDRC_MDCFG_0_DDR_MICRON_XM	(0x03588019|B_ALL)
++#define SDP_SDRC_MDCFG_0_DDR_NUMONYX_XM	(0x04590019|B_ALL)
+ #endif
+ 
+ #define SDP_SDRC_MR_0_DDR		0x00000032
+@@ -252,12 +254,47 @@ typedef enum {
+ 		(MICRON_TDPL_200 << 6) | (MICRON_TDAL_200))
+ 
+ #define MICRON_TWTR_200   2
+-#define MICRON_TCKE_200   1
++#define MICRON_TCKE_200   4
+ #define MICRON_TXP_200    2
+ #define MICRON_XSR_200   23
+ #define MICRON_V_ACTIMB_200 ((MICRON_TCKE_200 << 12) | (MICRON_XSR_200 << 0)) | \
+ 				(MICRON_TXP_200 << 8) | (MICRON_TWTR_200 << 16)
+ 
++/* NUMONYX part of IGEP0020 (165MHz optimized) 6.06ns
++ *   ACTIMA
++ *      TDAL = Twr/Tck + Trp/tck = 15/6 + 18/6 = 2.5 + 3 = 5.5 -> 6
++ *      TDPL (Twr) = 15/6 = 2.5 -> 3
++ *      TRRD = 12/6 = 2
++ *      TRCD = 22.5/6 = 3.75 -> 4
++ *      TRP  = 18/6 = 3
++ *      TRAS = 42/6 = 7
++ *      TRC  = 60/6 = 10
++ *      TRFC = 140/6 = 23.3 -> 24
++ *   ACTIMB
++ *	TWTR = 2
++ *	TCKE = 2
++ *	TXSR = 200/6 =  33.3 -> 34
++ *	TXP  = 1.0 + 1.1 = 2.1 -> 3 ¿?
++ */
++#define NUMONYX_TDAL_165   6
++#define NUMONYX_TDPL_165   3
++#define NUMONYX_TRRD_165   2
++#define NUMONYX_TRCD_165   4
++#define NUMONYX_TRP_165    3
++#define NUMONYX_TRAS_165   7
++#define NUMONYX_TRC_165   10
++#define NUMONYX_TRFC_165  24
++#define NUMONYX_V_ACTIMA_165 ((NUMONYX_TRFC_165 << 27) | (NUMONYX_TRC_165 << 22) | (NUMONYX_TRAS_165 << 18) \
++		| (NUMONYX_TRP_165 << 15) | (NUMONYX_TRCD_165 << 12) |(NUMONYX_TRRD_165 << 9) | \
++		(NUMONYX_TDPL_165 << 6) | (NUMONYX_TDAL_165))
++
++#define NUMONYX_TWTR_165   2
++#define NUMONYX_TCKE_165   2
++#define NUMONYX_TXP_165    3
++#define NUMONYX_XSR_165    34
++#define NUMONYX_V_ACTIMB_165 ((NUMONYX_TCKE_165 << 12) | (NUMONYX_XSR_165 << 0)) | \
++				(NUMONYX_TXP_165 << 8) | (NUMONYX_TWTR_165 << 16)
++
+ /* New and compatability speed defines */
+ #if defined(PRCM_CLK_CFG2_200MHZ) || defined(PRCM_CONFIG_II) || defined(PRCM_CONFIG_5B)
+ # define L3_100MHZ   /* Use with <= 100MHz SDRAM */
+@@ -276,6 +313,8 @@ typedef enum {
+ #elif  defined(L3_165MHZ)
+ # define MICRON_SDRC_ACTIM_CTRLA_0     MICRON_V_ACTIMA_165
+ # define MICRON_SDRC_ACTIM_CTRLB_0     MICRON_V_ACTIMB_165
++# define NUMONYX_SDRC_ACTIM_CTRLA_0    NUMONYX_V_ACTIMA_165
++# define NUMONYX_SDRC_ACTIM_CTRLB_0    NUMONYX_V_ACTIMB_165
+ #endif
+ 
+ 
+-- 
+1.6.1
+
diff --git a/recipes-bsp/x-load/x-load.inc b/recipes-bsp/x-load/x-load.inc
new file mode 100644
index 0000000..8743243
--- /dev/null
+++ b/recipes-bsp/x-load/x-load.inc
@@ -0,0 +1,57 @@
+DESCRIPTION = "x-load bootloader loader"
+SECTION = "bootloaders"
+PRIORITY = "optional"
+LICENSE = "GPLv2+"
+
+DEPENDS = "signgp-native"
+
+PARALLEL_MAKE=""
+
+EXTRA_OEMAKE = "CROSS_COMPILE=${TARGET_PREFIX}"
+
+XLOAD_MACHINE ?= "${MACHINE}_config"
+
+XLOAD_IMAGE ?= "x-load-${MACHINE}-${PV}-${PR}.bin.ift"
+XLOAD_SYMLINK ?= "x-load-${MACHINE}.bin.ift"
+XLOAD_USB_IMAGE ?= "x-load-usb-${MACHINE}-${PV}-${PR}.bin"
+XLOAD_USB_SYMLINK ?= "x-load-usb-${MACHINE}.bin"
+MLO_IMAGE ?= "MLO-${MACHINE}-${PV}-${PR}"
+MLO_SYMLINK ?= "MLO-${MACHINE}"
+MLO_SYMLINK_NOMACHINE ?= "MLO"
+XLOAD_LOAD_ADDRESS ?= 0x40200800
+
+do_compile () {
+	unset LDFLAGS
+	unset CFLAGS
+	unset CPPFLAGS
+	oe_runmake distclean
+	oe_runmake ${XLOAD_MACHINE}
+	oe_runmake
+}
+
+do_install () {
+	signGP ${S}/x-load.bin ${XLOAD_LOAD_ADDRESS}
+
+	install -d ${D}/boot
+	install ${S}/x-load.bin.ift ${D}/boot/${MLO_IMAGE}
+	ln -sf ${MLO_IMAGE} ${D}/boot/${MLO_SYMLINK_NOMACHINE} 
+}
+
+FILES_${PN} = "/boot"
+
+do_deploy () {
+	install -d ${DEPLOY_DIR_IMAGE}
+	install ${S}/x-load.bin.ift ${DEPLOY_DIR_IMAGE}/${XLOAD_IMAGE}
+	install ${S}/x-load.bin ${DEPLOY_DIR_IMAGE}/${XLOAD_USB_IMAGE}	
+	install ${S}/x-load.bin.ift ${DEPLOY_DIR_IMAGE}/${MLO_IMAGE}
+
+	cd ${DEPLOY_DIR_IMAGE}
+	rm -f ${XLOAD_SYMLINK}
+	ln -sf ${XLOAD_IMAGE} ${XLOAD_SYMLINK}
+	rm -f ${XLOAD_USB_SYMLINK}
+	ln -sf ${XLOAD_USB_IMAGE} ${XLOAD_USB_SYMLINK}	
+	rm -f ${MLO_SYMLINK}
+	ln -sf ${MLO_IMAGE} ${MLO_SYMLINK}
+}
+do_deploy[dirs] = "${S}"
+addtask deploy before do_build after do_install
diff --git a/recipes-bsp/x-load/x-load_git.bb b/recipes-bsp/x-load/x-load_git.bb
new file mode 100644
index 0000000..f45bac9
--- /dev/null
+++ b/recipes-bsp/x-load/x-load_git.bb
@@ -0,0 +1,22 @@
+require x-load.inc
+
+DEFAULT_PREFERENCE_omap3-pandora = "-1"
+
+FILESDIR = "${@os.path.dirname(bb.data.getVar('FILE',d,1))}/x-load-git"
+
+SRCREV_pn-${PN} = "1c9276af4d6a5b7014a7630a1abeddf3b3177563"
+
+PV = "1.44+${PR}+gitr${SRCREV}"
+PR ="r16"
+PE = "1"
+
+SRC_URI = "git://gitorious.org/x-load-omap3/mainline.git;branch=master;protocol=git"
+
+SRC_URI_append_beagleboard = " \
+                              file://name.patch \
+                              file://bb8547fcbc54ecc7a75f9ad45a31042a04d8a2ce.patch \
+                              file://xm-mem.patch \
+                             "
+S = "${WORKDIR}/git"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
-- 
2.39.2