diff --git a/Basic-Test-Package/MSP432/Test_MSP432_Blink_Tirtos/Board.h b/Basic-Test-Package/MSP432/Test_MSP432_Blink_Tirtos/Board.h
--- /dev/null
@@ -0,0 +1,125 @@
+/*
+ * Copyright (c) 2015-2016, Texas Instruments Incorporated
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * * Neither the name of Texas Instruments Incorporated nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __BOARD_H
+#define __BOARD_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "MSP432P401R_I3M.h"
+
+#define Board_initADC MSP_I3MSP432P401R_initADC
+#define Board_initGeneral MSP_I3MSP432P401R_initGeneral
+#define Board_initGPIO MSP_I3MSP432P401R_initGPIO
+#define Board_initI2C MSP_I3MSP432P401R_initI2C
+#define Board_initPWM MSP_I3MSP432P401R_initPWM
+#define Board_initSDSPI MSP_I3MSP432P401R_initSDSPI
+#define Board_initSPI MSP_I3MSP432P401R_initSPI
+#define Board_initUART MSP_I3MSP432P401R_initUART
+#define Board_initWatchdog MSP_I3MSP432P401R_initWatchdog
+#define Board_initWiFi MSP_I3MSP432P401R_initWiFi
+
+#define Board_ADC0 MSP_I3MSP432P401R_ADC0
+#define Board_ADC1 MSP_I3MSP432P401R_ADC1
+
+#define Board_LED_ON MSP_I3MSP432P401R_LED_ON
+#define Board_LED_OFF MSP_I3MSP432P401R_LED_OFF
+
+#define Board_BUTTON0 MSP_I3MSP432P401R_S1
+#define Board_BUTTON1 MSP_I3MSP432P401R_S2
+#define Board_LED0 MSP_I3MSP432P401R_LED_GREEN
+#define Board_LED1 MSP_I3MSP432P401R_LED_RED
+
+
+#define Board_SPI0_CS MSP_I3MSP432P401R_SPIB0_CS
+#define Board_SPI1_CS MSP_I3MSP432P401R_SPIA1_CS
+#define Board_SPI2_CS MSP_I3MSP432P401R_SPIA2_CS
+
+#define Board_SPI0_IRQ MSP_I3MSP432P401R_SPIB0_IRQ
+#define Board_SPI1_IRQ MSP_I3MSP432P401R_SPIA1_IRQ
+#define Board_SPI2_IRQ MSP_I3MSP432P401R_SPIA2_IRQ
+
+
+
+/*
+ * MSP_I3MSP432P401R_LED_GREEN & MSP_I3MSP432P401R_LED_BLUE are used for
+ * PWM examples. Uncomment the following lines if you would like to control
+ * the LEDs with the GPIO driver.
+ */
+
+
+#define Board_I2C0 MSP_I3MSP432P401R_I2CB2
+
+//#define Board_PWM0 MSP_I3MSP432P401R_PWM_TA1_1
+//#define Board_PWM1 MSP_I3MSP432P401R_PWM_TA1_2
+
+//#define Board_SDSPI0 MSP_I3MSP432P401R_SDSPIB0
+
+#define Board_SPI0 MSP_I3MSP432P401R_SPIB0
+#define Board_SPI1 MSP_I3MSP432P401R_SPIA1
+#define Board_SPI2 MSP_I3MSP432P401R_SPIA2
+
+#define Board_UART MSP_I3MSP432P401R_UARTA0
+//#define Board_UART0 MSP_I3MSP432P401R_UARTA0
+//#define Board_UART1 MSP_I3MSP432P401R_UARTA2
+
+#define Board_WATCHDOG0 MSP_I3MSP432P401R_WATCHDOG
+
+//#define Board_WIFI MSP_I3MSP432P401R_WIFI
+//#define Board_WIFI_SPI MSP_I3MSP432P401R_SPIB0
+
+/* Board specific I2C addresses */
+
+#define EEPROM_SLAVE_ADDRESS (0x50)
+
+/* Sensors */
+#define Board_INA219_ADDR (0x41)
+#define Board_HDC1000_ADDR (0x43)
+#define Board_HDC1080_ADDR (0x40)
+#define Board_TMP007_ADDR (0x44)
+#define Board_OPT3001_ADDR (0x45)
+#define Board_MPU9250_ADDR (0x68)
+#define Board_BMP280_ADDR (0x77)
+#define Board_LISHH12_ADDR (0x1E)
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __BOARD_H */
+
+
+
+