-#define TRUE 1\r
-#define FALSE 0\r
-\r
-#define ibl_MAGIC_VALUE 0xCEC11EBB\r
-\r
-#define ibl_HIGHEST_PRIORITY 1 \r
-#define ibl_LOWEST_PRIORITY 10\r
-#define ibl_DEVICE_NOBOOT 20\r
-\r
-#define SETIP(array,i0,i1,i2,i3) array[0]=(i0); \\r
- array[1]=(i1); \\r
- array[2]=(i2); \\r
- array[3]=(i3)\r
-\r
-#define ibl_BOOT_FORMAT_AUTO 0\r
-#define ibl_BOOT_FORMAT_NAME 1\r
-#define ibl_BOOT_FORMAT_BIS 2\r
-#define ibl_BOOT_FORMAT_COFF 3\r
-#define ibl_BOOT_FORMAT_ELF 4\r
-#define ibl_BOOT_FORMAT_BBLOB 5\r
-#define ibl_BOOT_FORMAT_BTBL 6\r
-\r
-#define ibl_MAIN_PLL 0\r
-#define ibl_DDR_PLL 1\r
-#define ibl_NET_PLL 2\r
-\r
-\r
-menuitem "EVM c6472 IBL";\r
-\r
-hotmenu setConfig_c6472()\r
-{\r
- ibl.iblMagic = ibl_MAGIC_VALUE;\r
-\r
- ibl.pllConfig[ibl_MAIN_PLL].doEnable = TRUE;\r
- ibl.pllConfig[ibl_MAIN_PLL].prediv = 1;\r
- ibl.pllConfig[ibl_MAIN_PLL].mult = 28;\r
- ibl.pllConfig[ibl_MAIN_PLL].postdiv = 1;\r
- ibl.pllConfig[ibl_MAIN_PLL].pllOutFreqMhz = 700;\r
-\r
- /* The DDR PLL. The multipliers/dividers are fixed, so are really dont cares */\r
- ibl.pllConfig[ibl_DDR_PLL].doEnable = TRUE;\r
-\r
- /* The network PLL. The multipliers/dividers are fixed */\r
- ibl.pllConfig[ibl_NET_PLL].doEnable = TRUE;\r
-\r
- /* EMIF configuration. The values are for DDR at 533 MHz */\r
- ibl.ddrConfig.configDdr = TRUE;\r
-\r
- ibl.ddrConfig.uEmif.emif3p1.sdcfg = 0x00538832; /* timing, 32bit wide */\r
- ibl.ddrConfig.uEmif.emif3p1.sdrfc = 0x0000073B; /* Refresh 533Mhz */ \r
- ibl.ddrConfig.uEmif.emif3p1.sdtim1 = 0x47245BD2; /* Timing 1 */\r
- ibl.ddrConfig.uEmif.emif3p1.sdtim2 = 0x0125DC44; /* Timing 2 */\r
- ibl.ddrConfig.uEmif.emif3p1.dmcctl = 0x50001906; /* PHY read latency for CAS 5 is 5 + 2 - 1 */\r
-\r
- /* Ethernet configuration for port 0 */\r
- ibl.ethConfig[0].ethPriority = ibl_HIGHEST_PRIORITY;\r
- ibl.ethConfig[0].port = 0;\r
-\r
- /* Bootp is disabled. The server and file name are provided here */\r
- ibl.ethConfig[0].doBootp = FALSE;\r
- ibl.ethConfig[0].useBootpServerIp = FALSE;\r
- ibl.ethConfig[0].useBootpFileName = FALSE;\r
- ibl.ethConfig[0].bootFormat = ibl_BOOT_FORMAT_AUTO;\r
-\r
-\r
- SETIP(ibl.ethConfig[0].ethInfo.ipAddr, 10,218,109,21);\r
- SETIP(ibl.ethConfig[0].ethInfo.serverIp, 10,218,109,196);\r
- SETIP(ibl.ethConfig[0].ethInfo.gatewayIp, 10,218,109,2);\r
- SETIP(ibl.ethConfig[0].ethInfo.netmask, 255,255,255,0);\r
-\r
- /* Leave the hardware address as 0 so the e-fuse value will be used */\r
-\r
-\r
-\r
-\r
- ibl.ethConfig[0].ethInfo.fileName[0] = 't';\r
- ibl.ethConfig[0].ethInfo.fileName[1] = 'e';\r
- ibl.ethConfig[0].ethInfo.fileName[2] = 's';\r
- ibl.ethConfig[0].ethInfo.fileName[3] = 't';\r
- ibl.ethConfig[0].ethInfo.fileName[4] = '.';\r
- ibl.ethConfig[0].ethInfo.fileName[5] = 'o';\r
- ibl.ethConfig[0].ethInfo.fileName[6] = 'u';\r
- ibl.ethConfig[0].ethInfo.fileName[7] = 't';\r
- ibl.ethConfig[0].ethInfo.fileName[8] = '\0';\r
- ibl.ethConfig[0].ethInfo.fileName[9] = '\0';\r
- ibl.ethConfig[0].ethInfo.fileName[10] = '\0';\r
- ibl.ethConfig[0].ethInfo.fileName[11] = '\0';\r
- ibl.ethConfig[0].ethInfo.fileName[12] = '\0';\r
- ibl.ethConfig[0].ethInfo.fileName[13] = '\0';\r
- ibl.ethConfig[0].ethInfo.fileName[14] = '\0';\r
-\r
- /* Even though the entire range of DDR2 is chosen, the load will\r
- * stop when the ftp reaches the end of the file */\r
- ibl.ethConfig[0].blob.startAddress = 0xe0000000; /* Base address of DDR2 */\r
- ibl.ethConfig[0].blob.sizeBytes = 0x20000000; /* All of DDR2 */\r
- ibl.ethConfig[0].blob.branchAddress = 0xe0000000; /* Base of DDR2 */\r
-\r
- /* For port 1 use bootp */\r
- /* Ethernet configuration for port 0 */\r
- ibl.ethConfig[1].ethPriority = ibl_HIGHEST_PRIORITY + 1;\r
- ibl.ethConfig[1].port = 1;\r
-\r
- /* Bootp is disabled. The server and file name are provided here */\r
- ibl.ethConfig[1].doBootp = TRUE;\r
- ibl.ethConfig[1].useBootpServerIp = TRUE;\r
- ibl.ethConfig[1].useBootpFileName = TRUE;\r
- ibl.ethConfig[1].bootFormat = ibl_BOOT_FORMAT_AUTO;\r
-\r
-\r
- /* SGMII not present */\r
- ibl.sgmiiConfig[0].adviseAbility = 0;\r
- ibl.sgmiiConfig[0].control = 0;\r
- ibl.sgmiiConfig[0].txConfig = 0;\r
- ibl.sgmiiConfig[0].rxConfig = 0;\r
- ibl.sgmiiConfig[0].auxConfig = 0;\r
-\r
- ibl.sgmiiConfig[1].adviseAbility = 0;\r
- ibl.sgmiiConfig[1].control = 0;\r
- ibl.sgmiiConfig[1].txConfig = 0;\r
- ibl.sgmiiConfig[1].rxConfig = 0;\r
- ibl.sgmiiConfig[1].auxConfig = 0;\r
-\r
-\r
- /* Leave the hardware address as 0 so the e-fuse value will be used */\r
- ibl.ethConfig[0].ethInfo.hwAddress[0] = 0;\r
- ibl.ethConfig[0].ethInfo.hwAddress[1] = 0;\r
- ibl.ethConfig[0].ethInfo.hwAddress[2] = 0;\r
- ibl.ethConfig[0].ethInfo.hwAddress[3] = 0;\r
- ibl.ethConfig[0].ethInfo.hwAddress[4] = 0;\r
- ibl.ethConfig[0].ethInfo.hwAddress[5] = 0;\r
-\r
-\r
- /* Leave all remaining fields as 0 since bootp will fill them in */\r
-\r
-\r
- /* Even though the entire range of DDR2 is chosen, the load will */\r
- /* stop when the ftp reaches the end of the file */\r
- \r
- ibl.ethConfig[1].blob.startAddress = 0xe0000000; /* Base address of DDR2 */\r
- ibl.ethConfig[1].blob.sizeBytes = 0x20000000; /* All of DDR2 */\r
- ibl.ethConfig[1].blob.branchAddress = 0xe0000000; /* Base of DDR2 */\r
- \r
-\r
-\r
- /* MDIO configuration */\r
- ibl.mdioConfig.nMdioOps = 8;\r
- ibl.mdioConfig.mdioClkDiv = 0x20;\r
- ibl.mdioConfig.interDelay = 1400; /* ~2ms at 700 MHz */\r
-\r
- ibl.mdioConfig.mdio[0] = (1 << 30) | (27 << 21) | (24 << 16) | 0x848b;\r
- ibl.mdioConfig.mdio[1] = (1 << 30) | (20 << 21) | (24 << 16) | 0x0ce0;\r
- ibl.mdioConfig.mdio[2] = (1 << 30) | (24 << 21) | (24 << 16) | 0x4101;\r
- ibl.mdioConfig.mdio[3] = (1 << 30) | ( 0 << 21) | (24 << 16) | 0x9140;\r
-\r
- ibl.mdioConfig.mdio[4] = (1 << 30) | (27 << 21) | (25 << 16) | 0x848b;\r
- ibl.mdioConfig.mdio[5] = (1 << 30) | (20 << 21) | (25 << 16) | 0x0ce0;\r
- ibl.mdioConfig.mdio[6] = (1 << 30) | (24 << 21) | (25 << 16) | 0x4101;\r
- ibl.mdioConfig.mdio[7] = (1 << 30) | ( 0 << 21) | (25 << 16) | 0x9140;\r
-\r
-\r
- /* Nand boot is disabled */\r
- ibl.nandConfig.nandPriority = ibl_DEVICE_NOBOOT;\r
-\r
- ibl.nandConfig.bootFormat = ibl_BOOT_FORMAT_AUTO;\r
-\r
- ibl.nandConfig.nandInfo.busWidthBits = 8;\r
- ibl.nandConfig.nandInfo.pageSizeBytes = 2048;\r
- ibl.nandConfig.nandInfo.pageEccBytes = 64;\r
- ibl.nandConfig.nandInfo.pagesPerBlock = 64;\r
- ibl.nandConfig.nandInfo.totalBlocks = 1024;\r
-\r
- ibl.nandConfig.nandInfo.addressBytes = 4;\r
- ibl.nandConfig.nandInfo.lsbFirst = TRUE;\r
- ibl.nandConfig.nandInfo.blockOffset = 22;\r
- ibl.nandConfig.nandInfo.pageOffset = 16;\r
- ibl.nandConfig.nandInfo.columnOffset = 0;\r
-\r
- ibl.nandConfig.nandInfo.resetCommand = 0xff;\r
- ibl.nandConfig.nandInfo.readCommandPre = 0;\r
- ibl.nandConfig.nandInfo.readCommandPost = 0x30;\r
- ibl.nandConfig.nandInfo.postCommand = TRUE;\r
-\r
-}\r
-\r
-\r
-menuitem "EVM c6474 Mez IBL";\r
-\r
-hotmenu setConfig_c6474()\r
-{\r
- ibl.iblMagic = ibl_MAGIC_VALUE;\r
-\r
- ibl.pllConfig[ibl_MAIN_PLL].doEnable = TRUE;\r
- ibl.pllConfig[ibl_MAIN_PLL].prediv = 1;\r
- ibl.pllConfig[ibl_MAIN_PLL].mult = 20;\r
- ibl.pllConfig[ibl_MAIN_PLL].postdiv = 1;\r
- ibl.pllConfig[ibl_MAIN_PLL].pllOutFreqMhz = 1000;\r
-\r
- /* The DDR PLL. The multipliers/dividers are fixed, so are really dont cares */\r
- ibl.pllConfig[ibl_DDR_PLL].doEnable = TRUE;\r
-\r
- /* The network PLL. The multipliers/dividers are fixed */\r
- ibl.pllConfig[ibl_NET_PLL].doEnable = TRUE;\r
-\r
- /* EMIF configuration. The values are for DDR at 533 MHz */\r
- ibl.ddrConfig.configDdr = TRUE;\r
-\r
- ibl.ddrConfig.uEmif.emif3p1.sdcfg = 0x00d38a32; /* cas5, 8 banks, 10 bit column */\r
- ibl.ddrConfig.uEmif.emif3p1.sdrfc = 0x00000a29; /* Refresh 333Mhz */ \r
- ibl.ddrConfig.uEmif.emif3p1.sdtim1 = 0x4d246c9a; /* Timing 1 */\r
- ibl.ddrConfig.uEmif.emif3p1.sdtim2 = 0x00993c42; /* Timing 2 */\r
- ibl.ddrConfig.uEmif.emif3p1.dmcctl = 0x50001906; /* PHY read latency for CAS 5 is 5 + 2 - 1 */\r
-\r
-\r
- /* Ethernet configuration for port 0 */\r
- ibl.ethConfig[0].ethPriority = ibl_HIGHEST_PRIORITY;\r
- ibl.ethConfig[0].port = 0;\r
-\r
- /* Bootp is disabled. The server and file name are provided here */\r
- ibl.ethConfig[0].doBootp = FALSE;\r
- ibl.ethConfig[0].useBootpServerIp = FALSE;\r
- ibl.ethConfig[0].useBootpFileName = FALSE;\r
- ibl.ethConfig[0].bootFormat = ibl_BOOT_FORMAT_BBLOB;\r
-\r
- SETIP(ibl.ethConfig[0].ethInfo.ipAddr, 10,218,109,35);\r
- SETIP(ibl.ethConfig[0].ethInfo.serverIp, 10,218,109,196);\r
- SETIP(ibl.ethConfig[0].ethInfo.gatewayIp, 10,218,109,1);\r
- SETIP(ibl.ethConfig[0].ethInfo.netmask, 255,255,255,0);\r
-\r
- /* Set the hardware address as 0 so the e-fuse value will be used */\r
- ibl.ethConfig[0].ethInfo.hwAddress[0] = 0;\r
- ibl.ethConfig[0].ethInfo.hwAddress[1] = 0;\r
- ibl.ethConfig[0].ethInfo.hwAddress[2] = 0;\r
- ibl.ethConfig[0].ethInfo.hwAddress[3] = 0;\r
- ibl.ethConfig[0].ethInfo.hwAddress[4] = 0;\r
- ibl.ethConfig[0].ethInfo.hwAddress[5] = 0;\r
-\r
-\r
- ibl.ethConfig[0].ethInfo.fileName[0] = 't';\r
- ibl.ethConfig[0].ethInfo.fileName[1] = 'e';\r
- ibl.ethConfig[0].ethInfo.fileName[2] = 's';\r
- ibl.ethConfig[0].ethInfo.fileName[3] = 't';\r
- ibl.ethConfig[0].ethInfo.fileName[4] = '.';\r
- ibl.ethConfig[0].ethInfo.fileName[5] = 'b';\r
- ibl.ethConfig[0].ethInfo.fileName[6] = 'l';\r
- ibl.ethConfig[0].ethInfo.fileName[7] = 'o';\r
- ibl.ethConfig[0].ethInfo.fileName[8] = 'b';\r
- ibl.ethConfig[0].ethInfo.fileName[9] = '\0';\r
- ibl.ethConfig[0].ethInfo.fileName[10] = '\0';\r
- ibl.ethConfig[0].ethInfo.fileName[11] = '\0';\r
- ibl.ethConfig[0].ethInfo.fileName[12] = '\0';\r
- ibl.ethConfig[0].ethInfo.fileName[13] = '\0';\r
- ibl.ethConfig[0].ethInfo.fileName[14] = '\0';\r
-\r
-\r
- /* Even though the entire range of DDR2 is chosen, the load will\r
- * stop when the ftp reaches the end of the file */\r
- ibl.ethConfig[0].blob.startAddress = 0x80000000; /* Base address of DDR2 */\r
- ibl.ethConfig[0].blob.sizeBytes = 0x20000000; /* All of DDR2 */\r
- ibl.ethConfig[0].blob.branchAddress = 0x80000000; /* Base of DDR2 */\r
-\r
- /* There is no port 1 on the 6474 */\r
- ibl.ethConfig[1].ethPriority = ibl_DEVICE_NOBOOT;\r
-\r
- /* SGMII is present */\r
- ibl.sgmiiConfig[0].adviseAbility = 0x9801;\r
- ibl.sgmiiConfig[0].control = 0x20;\r
- ibl.sgmiiConfig[0].txConfig = 0x00000ea3;\r
- ibl.sgmiiConfig[0].rxConfig = 0x00081023;\r
- ibl.sgmiiConfig[0].auxConfig = 0x0000000b;\r
-\r
- /* MDIO configuration */\r
- ibl.mdioConfig.nMdioOps = 8;\r
- ibl.mdioConfig.mdioClkDiv = 0x26;\r
- ibl.mdioConfig.interDelay = 2000; /* ~2ms at 1000 MHz */\r
-\r
- ibl.mdioConfig.mdio[0] = (1 << 30) | ( 4 << 21) | (27 << 16) | 0x0081;\r
- ibl.mdioConfig.mdio[1] = (1 << 30) | (26 << 21) | (15 << 16) | 0x0047;\r
- ibl.mdioConfig.mdio[2] = (1 << 30) | (26 << 21) | (14 << 16) | 0x0047;\r
- ibl.mdioConfig.mdio[3] = (1 << 30) | ( 0 << 21) | (15 << 16) | 0x8140;\r
-\r
- ibl.mdioConfig.mdio[4] = (1 << 30) | ( 0 << 21) | (14 << 16) | 0x8140;\r
- ibl.mdioConfig.mdio[5] = (1 << 30) | ( 1 << 21) | (22 << 16) | 0x043e;\r
- ibl.mdioConfig.mdio[6] = (1 << 30) | ( 1 << 21) | (22 << 16) | 0x043e;\r
- ibl.mdioConfig.mdio[7] = (1 << 30) | ( 0 << 21) | ( 1 << 16) | 0xa100;\r
-\r
-\r
- /* Nand boot is disabled */\r
- ibl.nandConfig.nandPriority = ibl_DEVICE_NOBOOT;\r
-\r
-}\r
-\r
-menuitem "EVM c6474 Lite EVM IBL";\r
-\r
-hotmenu setConfig_c6474lite()\r
-{\r
- ibl.iblMagic = ibl_MAGIC_VALUE;\r
-\r
- ibl.pllConfig[ibl_MAIN_PLL].doEnable = TRUE;\r
- ibl.pllConfig[ibl_MAIN_PLL].prediv = 1;\r
- ibl.pllConfig[ibl_MAIN_PLL].mult = 20;\r
- ibl.pllConfig[ibl_MAIN_PLL].postdiv = 1;\r
- ibl.pllConfig[ibl_MAIN_PLL].pllOutFreqMhz = 1000;\r
-\r
- /* The DDR PLL. The multipliers/dividers are fixed, so are really dont cares */\r
- ibl.pllConfig[ibl_DDR_PLL].doEnable = TRUE;\r
-\r
- /* The network PLL. The multipliers/dividers are fixed */\r
- ibl.pllConfig[ibl_NET_PLL].doEnable = TRUE;\r
-\r
- /* EMIF configuration. The values are for DDR at 533 MHz */\r
- ibl.ddrConfig.configDdr = TRUE;\r
-\r
- ibl.ddrConfig.uEmif.emif3p1.sdcfg = 0x00d38a32; /* cas5, 8 banks, 10 bit column */\r
- ibl.ddrConfig.uEmif.emif3p1.sdrfc = 0x00000a29; /* Refresh 333Mhz */ \r
- ibl.ddrConfig.uEmif.emif3p1.sdtim1 = 0x4d246c9a; /* Timing 1 */\r
- ibl.ddrConfig.uEmif.emif3p1.sdtim2 = 0x00993c42; /* Timing 2 */\r
- ibl.ddrConfig.uEmif.emif3p1.dmcctl = 0x50001906; /* PHY read latency for CAS 5 is 5 + 2 - 1 */\r
-\r
-\r
- /* Ethernet configuration for port 0 */\r
- ibl.ethConfig[0].ethPriority = ibl_HIGHEST_PRIORITY;\r
- ibl.ethConfig[0].port = 0;\r
-\r
- /* Bootp is disabled. The server and file name are provided here */\r
- ibl.ethConfig[0].doBootp = FALSE;\r
- ibl.ethConfig[0].useBootpServerIp = FALSE;\r
- ibl.ethConfig[0].useBootpFileName = FALSE;\r
- ibl.ethConfig[0].bootFormat = ibl_BOOT_FORMAT_BBLOB;\r
-\r
- SETIP(ibl.ethConfig[0].ethInfo.ipAddr, 158,218,100,114);\r
- SETIP(ibl.ethConfig[0].ethInfo.serverIp, 158,218,100,25);\r
- SETIP(ibl.ethConfig[0].ethInfo.gatewayIp, 158,218,100,2);\r
- SETIP(ibl.ethConfig[0].ethInfo.netmask, 255,255,255,0);\r
-\r
- /* Set the hardware address as 0 so the e-fuse value will be used */\r
- ibl.ethConfig[0].ethInfo.hwAddress[0] = 0;\r
- ibl.ethConfig[0].ethInfo.hwAddress[1] = 0;\r
- ibl.ethConfig[0].ethInfo.hwAddress[2] = 0;\r
- ibl.ethConfig[0].ethInfo.hwAddress[3] = 0;\r
- ibl.ethConfig[0].ethInfo.hwAddress[4] = 0;\r
- ibl.ethConfig[0].ethInfo.hwAddress[5] = 0;\r
-\r
-\r
- ibl.ethConfig[0].ethInfo.fileName[0] = 'c';\r
- ibl.ethConfig[0].ethInfo.fileName[1] = '6';\r
- ibl.ethConfig[0].ethInfo.fileName[2] = '4';\r
- ibl.ethConfig[0].ethInfo.fileName[3] = '7';\r
- ibl.ethConfig[0].ethInfo.fileName[4] = '4';\r
- ibl.ethConfig[0].ethInfo.fileName[5] = 'l';\r
- ibl.ethConfig[0].ethInfo.fileName[6] = '-';\r
- ibl.ethConfig[0].ethInfo.fileName[7] = 'l';\r
- ibl.ethConfig[0].ethInfo.fileName[8] = 'e';\r
- ibl.ethConfig[0].ethInfo.fileName[9] = '.';\r
- ibl.ethConfig[0].ethInfo.fileName[10] = 'b';\r
- ibl.ethConfig[0].ethInfo.fileName[11] = 'i';\r
- ibl.ethConfig[0].ethInfo.fileName[12] = 'n';\r
- ibl.ethConfig[0].ethInfo.fileName[13] = '\0';\r
- ibl.ethConfig[0].ethInfo.fileName[14] = '\0';\r
-\r
-\r
- /* Even though the entire range of DDR2 is chosen, the load will\r
- * stop when the ftp reaches the end of the file */\r
- ibl.ethConfig[0].blob.startAddress = 0x80000000; /* Base address of DDR2 */\r
- ibl.ethConfig[0].blob.sizeBytes = 0x20000000; /* All of DDR2 */\r
- ibl.ethConfig[0].blob.branchAddress = 0x80000000; /* Base of DDR2 */\r
-\r
- /* There is no port 1 on the 6474 Lite EVM */\r
- ibl.ethConfig[1].ethPriority = ibl_DEVICE_NOBOOT;\r
-\r
- /* SGMII is present */\r
- ibl.sgmiiConfig[0].adviseAbility = 0x9801;\r
- ibl.sgmiiConfig[0].control = 0x20;\r
- ibl.sgmiiConfig[0].txConfig = 0x00000e23;\r
- ibl.sgmiiConfig[0].rxConfig = 0x00081023;\r
- ibl.sgmiiConfig[0].auxConfig = 0x0000000b;\r
-\r
- /* MDIO configuration */\r
- ibl.mdioConfig.nMdioOps = 8;\r
- ibl.mdioConfig.mdioClkDiv = 0x26;\r
- ibl.mdioConfig.interDelay = 2000; /* ~2ms at 1000 MHz */\r
-\r
- ibl.mdioConfig.mdio[0] = (1 << 30) | ( 4 << 21) | (27 << 16) | 0x0081;\r
- ibl.mdioConfig.mdio[1] = (1 << 30) | (26 << 21) | (15 << 16) | 0x0047;\r
- ibl.mdioConfig.mdio[2] = (1 << 30) | (26 << 21) | (14 << 16) | 0x0047;\r
- ibl.mdioConfig.mdio[3] = (1 << 30) | ( 0 << 21) | (15 << 16) | 0x8140;\r
-\r
- ibl.mdioConfig.mdio[4] = (1 << 30) | ( 0 << 21) | (14 << 16) | 0x8140;\r
- ibl.mdioConfig.mdio[5] = (1 << 30) | ( 1 << 21) | (22 << 16) | 0x043e;\r
- ibl.mdioConfig.mdio[6] = (1 << 30) | ( 1 << 21) | (22 << 16) | 0x043e;\r
- ibl.mdioConfig.mdio[7] = (1 << 30) | ( 0 << 21) | ( 1 << 16) | 0xa100;\r
-\r
-\r
- /* This board has NAND. We will enable later */\r
- ibl.nandConfig.nandPriority = ibl_DEVICE_NOBOOT;\r
-\r
-}\r
-\r
-menuitem "EVM c6457 EVM IBL";\r
-\r
-hotmenu setConfig_c6457()\r
-{\r
- ibl.iblMagic = ibl_MAGIC_VALUE;\r
-\r
- ibl.pllConfig[ibl_MAIN_PLL].doEnable = TRUE;\r
- ibl.pllConfig[ibl_MAIN_PLL].prediv = 1;\r
- ibl.pllConfig[ibl_MAIN_PLL].mult = 20;\r
- ibl.pllConfig[ibl_MAIN_PLL].postdiv = 1;\r
- ibl.pllConfig[ibl_MAIN_PLL].pllOutFreqMhz = 1000;\r
-\r
- /* The DDR PLL. The multipliers/dividers are fixed, so are really dont cares */\r
- ibl.pllConfig[ibl_DDR_PLL].doEnable = TRUE;\r
-\r
- /* The network PLL. The multipliers/dividers are fixed */\r
- ibl.pllConfig[ibl_NET_PLL].doEnable = TRUE;\r
-\r
- /* EMIF configuration */\r
- ibl.ddrConfig.configDdr = TRUE;\r
-\r
- ibl.ddrConfig.uEmif.emif3p1.sdcfg = 0x00d38a32; /* cas5, 8 banks, 10 bit column */\r
- ibl.ddrConfig.uEmif.emif3p1.sdrfc = 0x00000a0e; /* Refresh 333Mhz */ \r
- ibl.ddrConfig.uEmif.emif3p1.sdtim1 = 0x832474da; /* Timing 1 */\r
- ibl.ddrConfig.uEmif.emif3p1.sdtim2 = 0x3d44c742; /* Timing 2 */\r
- ibl.ddrConfig.uEmif.emif3p1.dmcctl = 0x50001906; /* PHY read latency for CAS 5 is 5 + 2 - 1 */\r
-\r
-\r
- /* Ethernet configuration for port 0 */\r
- ibl.ethConfig[0].ethPriority = ibl_HIGHEST_PRIORITY;\r
- ibl.ethConfig[0].port = 0;\r
-\r
- /* Bootp is disabled. The server and file name are provided here */\r
- ibl.ethConfig[0].doBootp = FALSE;\r
- ibl.ethConfig[0].useBootpServerIp = FALSE;\r
- ibl.ethConfig[0].useBootpFileName = FALSE;\r
- ibl.ethConfig[0].bootFormat = ibl_BOOT_FORMAT_BBLOB;\r
-\r
- SETIP(ibl.ethConfig[0].ethInfo.ipAddr, 158,218,100,115);\r
- SETIP(ibl.ethConfig[0].ethInfo.serverIp, 158,218,100,25);\r
- SETIP(ibl.ethConfig[0].ethInfo.gatewayIp, 158,218,100,2);\r
- SETIP(ibl.ethConfig[0].ethInfo.netmask, 255,255,255,0);\r
-\r
- /* Set the hardware address as 0 so the e-fuse value will be used */\r
- ibl.ethConfig[0].ethInfo.hwAddress[0] = 0;\r
- ibl.ethConfig[0].ethInfo.hwAddress[1] = 0;\r
- ibl.ethConfig[0].ethInfo.hwAddress[2] = 0;\r
- ibl.ethConfig[0].ethInfo.hwAddress[3] = 0;\r
- ibl.ethConfig[0].ethInfo.hwAddress[4] = 0;\r
- ibl.ethConfig[0].ethInfo.hwAddress[5] = 0;\r
-\r
-\r
- ibl.ethConfig[0].ethInfo.fileName[0] = 'c';\r
- ibl.ethConfig[0].ethInfo.fileName[1] = '6';\r
- ibl.ethConfig[0].ethInfo.fileName[2] = '4';\r
- ibl.ethConfig[0].ethInfo.fileName[3] = '5';\r
- ibl.ethConfig[0].ethInfo.fileName[4] = '7';\r
- ibl.ethConfig[0].ethInfo.fileName[5] = '-';\r
- ibl.ethConfig[0].ethInfo.fileName[6] = 'l';\r
- ibl.ethConfig[0].ethInfo.fileName[7] = 'e';\r
- ibl.ethConfig[0].ethInfo.fileName[8] = '.';\r
- ibl.ethConfig[0].ethInfo.fileName[9] = 'b';\r
- ibl.ethConfig[0].ethInfo.fileName[10] = 'i';\r
- ibl.ethConfig[0].ethInfo.fileName[11] = 'n';\r
- ibl.ethConfig[0].ethInfo.fileName[12] = '\0';\r
- ibl.ethConfig[0].ethInfo.fileName[13] = '\0';\r
- ibl.ethConfig[0].ethInfo.fileName[14] = '\0';\r
-\r
-\r
- /* Even though the entire range of DDR2 is chosen, the load will\r
- * stop when the ftp reaches the end of the file */\r
- ibl.ethConfig[0].blob.startAddress = 0xe0000000; /* Base address of DDR2 */\r
- ibl.ethConfig[0].blob.sizeBytes = 0x20000000; /* All of DDR2 */\r
- ibl.ethConfig[0].blob.branchAddress = 0xe0000000; /* Base of DDR2 */\r
-\r
- /* There is no port 1 on the 6457 Lite EVM */\r
- ibl.ethConfig[1].ethPriority = ibl_DEVICE_NOBOOT;\r
-\r
- /* SGMII is present */\r
- ibl.sgmiiConfig[0].adviseAbility = 0x9801;\r
- ibl.sgmiiConfig[0].control = 0x20;\r
- ibl.sgmiiConfig[0].txConfig = 0x00000e23;\r
- ibl.sgmiiConfig[0].rxConfig = 0x00081023;\r
- ibl.sgmiiConfig[0].auxConfig = 0x0000000b;\r
-\r
- /* MDIO configuration */\r
- ibl.mdioConfig.nMdioOps = 8;\r
- ibl.mdioConfig.mdioClkDiv = 0x26;\r
- ibl.mdioConfig.interDelay = 2000; /* ~2ms at 1000 MHz */\r
-\r
- ibl.mdioConfig.mdio[0] = (1 << 30) | ( 4 << 21) | (27 << 16) | 0x0081;\r
- ibl.mdioConfig.mdio[1] = (1 << 30) | (26 << 21) | (15 << 16) | 0x0047;\r
- ibl.mdioConfig.mdio[2] = (1 << 30) | (26 << 21) | (14 << 16) | 0x0047;\r
- ibl.mdioConfig.mdio[3] = (1 << 30) | ( 0 << 21) | (15 << 16) | 0x8140;\r
-\r
- ibl.mdioConfig.mdio[4] = (1 << 30) | ( 0 << 21) | (14 << 16) | 0x8140;\r
- ibl.mdioConfig.mdio[5] = (1 << 30) | ( 1 << 21) | (22 << 16) | 0x043e;\r
- ibl.mdioConfig.mdio[6] = (1 << 30) | ( 1 << 21) | (22 << 16) | 0x043e;\r
- ibl.mdioConfig.mdio[7] = (1 << 30) | ( 0 << 21) | ( 1 << 16) | 0xa100;\r
-\r
-\r
- /* This board has NAND. We will enable later */\r
- ibl.nandConfig.nandPriority = ibl_DEVICE_NOBOOT;\r
-\r
-}\r
-\r
-menuitem "EVM c6455 IBL";\r
-\r
-hotmenu setConfig_c6455()\r
-{\r
- ibl.iblMagic = ibl_MAGIC_VALUE;\r
-\r
- ibl.pllConfig[ibl_MAIN_PLL].doEnable = TRUE;\r
- ibl.pllConfig[ibl_MAIN_PLL].prediv = 1;\r
- ibl.pllConfig[ibl_MAIN_PLL].mult = 20;\r
- ibl.pllConfig[ibl_MAIN_PLL].postdiv = 1;\r
- ibl.pllConfig[ibl_MAIN_PLL].pllOutFreqMhz = 1000;\r
-\r
- /* The DDR PLL. The multipliers/dividers are fixed, so are really dont cares */\r
- ibl.pllConfig[ibl_DDR_PLL].doEnable = TRUE;\r
-\r
- /* The network PLL. The multipliers/dividers are fixed */\r
- ibl.pllConfig[ibl_NET_PLL].doEnable = TRUE;\r
-\r
- /* EMIF configuration. The values are for DDR at 500 MHz */\r
- ibl.ddrConfig.configDdr = TRUE;\r
-\r
- ibl.ddrConfig.uEmif.emif3p1.sdcfg = 0x00538822; /* timing, 32bit wide */\r
- ibl.ddrConfig.uEmif.emif3p1.sdrfc = 0x000007a2; /* Refresh 500Mhz */ \r
- ibl.ddrConfig.uEmif.emif3p1.sdtim1 = 0x3edb4b91; /* Timing 1 */\r
- ibl.ddrConfig.uEmif.emif3p1.sdtim2 = 0x00a2c722; /* Timing 2 */\r
- ibl.ddrConfig.uEmif.emif3p1.dmcctl = 0x00000005; /* PHY read latency for CAS 4 is 4 + 2 - 1 */\r
-\r
- /* Ethernet configuration for port 0 */\r
- ibl.ethConfig[0].ethPriority = ibl_HIGHEST_PRIORITY;\r
- ibl.ethConfig[0].port = 0;\r
-\r
- /* Bootp is disabled. The server and file name are provided here */\r
- ibl.ethConfig[0].doBootp = FALSE;\r
- ibl.ethConfig[0].useBootpServerIp = FALSE;\r
- ibl.ethConfig[0].useBootpFileName = FALSE;\r
- ibl.ethConfig[0].bootFormat = ibl_BOOT_FORMAT_BBLOB;\r
-\r
-\r
- SETIP(ibl.ethConfig[0].ethInfo.ipAddr, 158,218,100,118);\r
- SETIP(ibl.ethConfig[0].ethInfo.serverIp, 158,218,100,25);\r
- SETIP(ibl.ethConfig[0].ethInfo.gatewayIp, 158,218,100,2);\r
- SETIP(ibl.ethConfig[0].ethInfo.netmask, 255,255,255,0);\r
-\r
- /* There is no e-fuse mac address. A value must be assigned\r
- ibl.ethConfig[0].ethInfo.hwAddress[0] = 0x00;\r
- ibl.ethConfig[0].ethInfo.hwAddress[1] = 0xe0;\r
- ibl.ethConfig[0].ethInfo.hwAddress[2] = 0xa6;\r
- ibl.ethConfig[0].ethInfo.hwAddress[3] = 0x66;\r
- ibl.ethConfig[0].ethInfo.hwAddress[4] = 0x57;\r
- ibl.ethConfig[0].ethInfo.hwAddress[5] = 0x19;\r
-\r
-\r
- ibl.ethConfig[0].ethInfo.fileName[0] = 't';\r
- ibl.ethConfig[0].ethInfo.fileName[1] = 'e';\r
- ibl.ethConfig[0].ethInfo.fileName[2] = 's';\r
- ibl.ethConfig[0].ethInfo.fileName[3] = 't';\r
- ibl.ethConfig[0].ethInfo.fileName[4] = '.';\r
- ibl.ethConfig[0].ethInfo.fileName[5] = 'b';\r
- ibl.ethConfig[0].ethInfo.fileName[6] = 'l';\r
- ibl.ethConfig[0].ethInfo.fileName[7] = 'o';\r
- ibl.ethConfig[0].ethInfo.fileName[8] = 'b';\r
- ibl.ethConfig[0].ethInfo.fileName[9] = '\0';\r
- ibl.ethConfig[0].ethInfo.fileName[10] = '\0';\r
- ibl.ethConfig[0].ethInfo.fileName[11] = '\0';\r
- ibl.ethConfig[0].ethInfo.fileName[12] = '\0';\r
- ibl.ethConfig[0].ethInfo.fileName[13] = '\0';\r
- ibl.ethConfig[0].ethInfo.fileName[14] = '\0';\r
-\r
-\r
- /* Even though the entire range of DDR2 is chosen, the load will\r
- * stop when the ftp reaches the end of the file */\r
- ibl.ethConfig[0].blob.startAddress = 0xe0000000; /* Base address of DDR2 */\r
- ibl.ethConfig[0].blob.sizeBytes = 0x20000000; /* All of DDR2 */\r
- ibl.ethConfig[0].blob.branchAddress = 0xe0000000; /* Base of DDR2 */\r
-\r
- /* There is no ethernet port 1 */\r
- ibl.ethConfig[1].ethPriority = ibl_DEVICE_NOBOOT;\r
-\r
-\r
- /* SGMII not present */\r
- ibl.sgmiiConfig[0].adviseAbility = 0;\r
- ibl.sgmiiConfig[0].control = 0;\r
- ibl.sgmiiConfig[0].txConfig = 0;\r
- ibl.sgmiiConfig[0].rxConfig = 0;\r
- ibl.sgmiiConfig[0].auxConfig = 0;\r
-\r
- ibl.sgmiiConfig[1].adviseAbility = 0;\r
- ibl.sgmiiConfig[1].control = 0;\r
- ibl.sgmiiConfig[1].txConfig = 0;\r
- ibl.sgmiiConfig[1].rxConfig = 0;\r
- ibl.sgmiiConfig[1].auxConfig = 0;\r
-\r
-\r
-\r
- /* MDIO configuration */\r
- ibl.mdioConfig.nMdioOps = 0;\r
- ibl.mdioConfig.mdioClkDiv = 0x20;\r
- ibl.mdioConfig.interDelay = 2000; /* ~2ms at 1000 MHz */\r
-\r
- ibl.mdioConfig.mdio[0] = (1 << 30) | (14 << 21) | (0 << 16) | 0xd5d0;\r
-\r
-\r
- /* Nand boot is disabled */\r
- ibl.nandConfig.nandPriority = ibl_DEVICE_NOBOOT;\r
-\r
-}\r
-\r
-\r
+#define TRUE 1
+#define FALSE 0
+
+#define ibl_MAGIC_VALUE 0xCEC11EBC
+
+#define ibl_HIGHEST_PRIORITY 1
+#define ibl_LOWEST_PRIORITY 10
+#define ibl_DEVICE_NOBOOT 20
+
+#define ibl_PORT_SWITCH_ALL -2
+
+#define SETIP(array,i0,i1,i2,i3) array[0]=(i0); \
+ array[1]=(i1); \
+ array[2]=(i2); \
+ array[3]=(i3)
+
+#define ibl_BOOT_MODE_TFTP 10
+#define ibl_BOOT_MODE_NAND 11
+#define ibl_BOOT_MODE_NOR 12
+#define ibl_BOOT_MODE_NONE 13
+
+
+#define ibl_BOOT_FORMAT_AUTO 0
+#define ibl_BOOT_FORMAT_NAME 1
+#define ibl_BOOT_FORMAT_BIS 2
+#define ibl_BOOT_FORMAT_COFF 3
+#define ibl_BOOT_FORMAT_ELF 4
+#define ibl_BOOT_FORMAT_BBLOB 5
+#define ibl_BOOT_FORMAT_BTBL 6
+
+#define ibl_PMEM_IF_GPIO 0
+
+#define ibl_PMEM_IF_CHIPSEL_2 2 /* EMIF interface using chip select 2, no wait enabled */
+#define ibl_PMEM_IF_CHIPSEL_3 3 /* EMIF interface using chip select 3, no wait enabled */
+#define ibl_PMEM_IF_CHIPSEL_4 4 /* EMIF interface using chip select 4 */
+#define ibl_PMEM_IF_CHIPSEL_5 5 /* EMIF interface using chip select 5 */
+
+#define ibl_PMEM_IF_SPI 100 /* Interface through SPI */
+
+
+#define ibl_MAIN_PLL 0
+#define ibl_DDR_PLL 1
+#define ibl_NET_PLL 2
+
+#define ibl_EMIF4_ENABLE_sdRamConfig (1 << 0)
+#define ibl_EMIF4_ENABLE_sdRamConfig2 (1 << 1)
+#define ibl_EMIF4_ENABLE_sdRamRefreshCtl (1 << 2)
+#define ibl_EMIF4_ENABLE_sdRamTiming1 (1 << 3)
+#define ibl_EMIF4_ENABLE_sdRamTiming2 (1 << 4)
+#define ibl_EMIF4_ENABLE_sdRamTiming3 (1 << 5)
+#define ibl_EMIF4_ENABLE_lpDdrNvmTiming (1 << 6)
+#define ibl_EMIF4_ENABLE_powerManageCtl (1 << 7)
+#define ibl_EMIF4_ENABLE_iODFTTestLogic (1 << 8)
+#define ibl_EMIF4_ENABLE_performCountCfg (1 << 9)
+#define ibl_EMIF4_ENABLE_performCountMstRegSel (1 << 10)
+#define ibl_EMIF4_ENABLE_readIdleCtl (1 << 11)
+#define ibl_EMIF4_ENABLE_sysVbusmIntEnSet (1 << 12)
+#define ibl_EMIF4_ENABLE_sdRamOutImpdedCalCfg (1 << 13)
+#define ibl_EMIF4_ENABLE_tempAlterCfg (1 << 14)
+#define ibl_EMIF4_ENABLE_ddrPhyCtl1 (1 << 15)
+#define ibl_EMIF4_ENABLE_ddrPhyCtl2 (1 << 16)
+#define ibl_EMIF4_ENABLE_priClassSvceMap (1 << 17)
+#define ibl_EMIF4_ENABLE_mstId2ClsSvce1Map (1 << 18)
+#define ibl_EMIF4_ENABLE_mstId2ClsSvce2Map (1 << 11)
+#define ibl_EMIF4_ENABLE_eccCtl (1 << 19)
+#define ibl_EMIF4_ENABLE_eccRange1 (1 << 20)
+#define ibl_EMIF4_ENABLE_eccRange2 (1 << 21)
+#define ibl_EMIF4_ENABLE_rdWrtExcThresh (1 << 22)
+#define ibl_BOOT_EMIF4_ENABLE_ALL 0x007fffff
+
+
+#define ibl_EVM_C6455L 0x10 /**< C6455 Low Cost EVM */
+#define ibl_EVM_C6457L 0x20 /**< C6457 Low Cost EVM */
+#define ibl_EVM_C6472L 0x30 /**< C6472 Low Cost EVM */
+#define ibl_EVM_C6474L 0x40 /**< C6474 Low Cost EVM */
+#define ibl_EVM_C6474M 0x41 /**< C6474 Mez EVM */
+#define ibl_EVM_C6670L 0x50 /**< C6670 Low Cost EVM */
+#define ibl_EVM_C6678L 0x60 /**< C6678 Low Cost EVM */
+
+/* @} */
+
+menuitem "EVM c6472 IBL";
+
+hotmenu setConfig_c6472()
+{
+ ibl.iblMagic = ibl_MAGIC_VALUE;
+ ibl.iblEvmType = ibl_EVM_C6472L;
+
+ ibl.pllConfig[ibl_MAIN_PLL].doEnable = TRUE;
+ ibl.pllConfig[ibl_MAIN_PLL].prediv = 1;
+ ibl.pllConfig[ibl_MAIN_PLL].mult = 28;
+ ibl.pllConfig[ibl_MAIN_PLL].postdiv = 1;
+ ibl.pllConfig[ibl_MAIN_PLL].pllOutFreqMhz = 700;
+
+ /* The DDR PLL. The multipliers/dividers are fixed, so are really dont cares */
+ ibl.pllConfig[ibl_DDR_PLL].doEnable = TRUE;
+
+ /* The network PLL. The multipliers/dividers are fixed */
+ ibl.pllConfig[ibl_NET_PLL].doEnable = TRUE;
+
+ /* EMIF configuration. The values are for DDR at 533 MHz */
+ ibl.ddrConfig.configDdr = TRUE;
+
+ ibl.ddrConfig.uEmif.emif3p1.sdcfg = 0x00538832; /* timing, 32bit wide */
+ ibl.ddrConfig.uEmif.emif3p1.sdrfc = 0x0000073B; /* Refresh 533Mhz */
+ ibl.ddrConfig.uEmif.emif3p1.sdtim1 = 0x47245BD2; /* Timing 1 */
+ ibl.ddrConfig.uEmif.emif3p1.sdtim2 = 0x0125DC44; /* Timing 2 */
+ ibl.ddrConfig.uEmif.emif3p1.dmcctl = 0x50001906; /* PHY read latency for CAS 5 is 5 + 2 - 1 */
+
+ /* SGMII not present */
+ ibl.sgmiiConfig[0].configure = FALSE;
+ ibl.sgmiiConfig[1].configure = FALSE;
+
+ /* MDIO configuration */
+ ibl.mdioConfig.nMdioOps = 8;
+ ibl.mdioConfig.mdioClkDiv = 0x20;
+ ibl.mdioConfig.interDelay = 1400; /* ~2ms at 700 MHz */
+
+ ibl.mdioConfig.mdio[0] = (1 << 30) | (27 << 21) | (24 << 16) | 0x848b;
+ ibl.mdioConfig.mdio[1] = (1 << 30) | (20 << 21) | (24 << 16) | 0x0ce0;
+ ibl.mdioConfig.mdio[2] = (1 << 30) | (24 << 21) | (24 << 16) | 0x4101;
+ ibl.mdioConfig.mdio[3] = (1 << 30) | ( 0 << 21) | (24 << 16) | 0x9140;
+
+ ibl.mdioConfig.mdio[4] = (1 << 30) | (27 << 21) | (25 << 16) | 0x848b;
+ ibl.mdioConfig.mdio[5] = (1 << 30) | (20 << 21) | (25 << 16) | 0x0ce0;
+ ibl.mdioConfig.mdio[6] = (1 << 30) | (24 << 21) | (25 << 16) | 0x4101;
+ ibl.mdioConfig.mdio[7] = (1 << 30) | ( 0 << 21) | (25 << 16) | 0x9140;
+
+ /* spiConfig and emifConfig not needed */
+
+ /* Ethernet configuration for Boot mode 0 */
+ ibl.bootModes[0].bootMode = ibl_BOOT_MODE_TFTP;
+ ibl.bootModes[0].priority = ibl_HIGHEST_PRIORITY;
+ ibl.bootModes[0].port = 0;
+
+ /* Bootp is disabled. The server and file name are provided here */
+ ibl.bootModes[0].u.ethBoot.doBootp = FALSE;
+ ibl.bootModes[0].u.ethBoot.useBootpServerIp = TRUE;
+ ibl.bootModes[0].u.ethBoot.useBootpFileName = TRUE;
+ ibl.bootModes[0].u.ethBoot.bootFormat = ibl_BOOT_FORMAT_BBLOB;
+
+ /* Even though the entire range of DDR2 is chosen, the load will
+ * stop when the ftp reaches the end of the file */
+ ibl.bootModes[0].u.ethBoot.blob.startAddress = 0xe0000000; /* Base address of DDR2 */
+ ibl.bootModes[0].u.ethBoot.blob.sizeBytes = 0x20000000; /* All of DDR2 */
+ ibl.bootModes[0].u.ethBoot.blob.branchAddress = 0xe0000000; /* Base of DDR2 */
+
+ SETIP(ibl.bootModes[0].u.ethBoot.ethInfo.ipAddr, 158,218,100,113);
+ SETIP(ibl.bootModes[0].u.ethBoot.ethInfo.serverIp, 158,218,100,25);
+ SETIP(ibl.bootModes[0].u.ethBoot.ethInfo.gatewayIp, 158,218,100,2);
+ SETIP(ibl.bootModes[0].u.ethBoot.ethInfo.netmask, 255,255,255,0);
+
+ /* Leave the hardware address as 0 so the e-fuse value will be used */
+ ibl.bootModes[0].u.ethBoot.ethInfo.hwAddress[0] = 0;
+ ibl.bootModes[0].u.ethBoot.ethInfo.hwAddress[1] = 0;
+ ibl.bootModes[0].u.ethBoot.ethInfo.hwAddress[2] = 0;
+ ibl.bootModes[0].u.ethBoot.ethInfo.hwAddress[3] = 0;
+ ibl.bootModes[0].u.ethBoot.ethInfo.hwAddress[4] = 0;
+ ibl.bootModes[0].u.ethBoot.ethInfo.hwAddress[5] = 0;
+
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[0] = 'c';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[1] = '6';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[2] = '4';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[3] = '7';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[4] = '2';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[5] = '-';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[6] = 'l';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[7] = 'e';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[8] = '.';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[9] = 'b';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[10] = 'i';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[11] = 'n';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[12] = '\0';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[13] = '\0';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[14] = '\0';
+
+ ibl.bootModes[1].bootMode = ibl_BOOT_MODE_NAND;
+ ibl.bootModes[1].priority = ibl_HIGHEST_PRIORITY;
+ ibl.bootModes[1].port = 0;
+
+ ibl.bootModes[1].u.nandBoot.bootFormat = ibl_BOOT_FORMAT_BBLOB;
+ ibl.bootModes[1].u.nandBoot.bootAddress[0][0] = 0x200000; /* Image 0 NAND offset address (block 1) in LE mode */
+ ibl.bootModes[1].u.nandBoot.bootAddress[0][1] = 0x4000000; /* Image 1 NAND offset address (block 2048) in LE mode */
+ ibl.bootModes[1].u.nandBoot.bootAddress[1][0] = 0x200000; /* Image 0 NAND offset address (block 1) in BE mode */
+ ibl.bootModes[1].u.nandBoot.bootAddress[1][1] = 0x4000000; /* Image 1 NAND offset address (block 2048) in BE mode */
+ ibl.bootModes[1].u.nandBoot.interface = ibl_PMEM_IF_GPIO;
+
+ ibl.bootModes[1].u.nandBoot.blob[0][0].startAddress = 0xe0000000; /* Image 0 load start address in LE mode */
+ ibl.bootModes[1].u.nandBoot.blob[0][0].sizeBytes = 0xA00000; /* Image 0 size (10 MB) in LE mode */
+ ibl.bootModes[1].u.nandBoot.blob[0][0].branchAddress = 0xe0000000; /* Image 0 branch address after loading in LE mode */
+ ibl.bootModes[1].u.nandBoot.blob[0][1].startAddress = 0xe0000000; /* Image 1 load start address in LE mode */
+ ibl.bootModes[1].u.nandBoot.blob[0][1].sizeBytes = 0xA00000; /* Image 1 size (10 MB) in LE mode */
+ ibl.bootModes[1].u.nandBoot.blob[0][1].branchAddress = 0xe0000000; /* Image 1 branch address after loading in LE mode */
+ ibl.bootModes[1].u.nandBoot.blob[1][0].startAddress = 0xe0000000; /* Image 0 load start address in BE mode */
+ ibl.bootModes[1].u.nandBoot.blob[1][0].sizeBytes = 0xA00000; /* Image 0 size (10 MB) in BE mode */
+ ibl.bootModes[1].u.nandBoot.blob[1][0].branchAddress = 0xe0000000; /* Image 0 branch address after loading in BE mode */
+ ibl.bootModes[1].u.nandBoot.blob[1][1].startAddress = 0xe0000000; /* Image 1 load start address in BE mode */
+ ibl.bootModes[1].u.nandBoot.blob[1][1].sizeBytes = 0xA00000; /* Image 1 size (10 MB) in BE mode */
+ ibl.bootModes[1].u.nandBoot.blob[1][1].branchAddress = 0xe0000000; /* Image 1 branch address after loading in BE mode */
+
+
+ ibl.bootModes[1].u.nandBoot.nandInfo.busWidthBits = 8;
+ ibl.bootModes[1].u.nandBoot.nandInfo.pageSizeBytes = 2048;
+ ibl.bootModes[1].u.nandBoot.nandInfo.pageEccBytes = 64;
+ ibl.bootModes[1].u.nandBoot.nandInfo.pagesPerBlock = 64;
+ ibl.bootModes[1].u.nandBoot.nandInfo.totalBlocks = 512;
+
+ ibl.bootModes[1].u.nandBoot.nandInfo.addressBytes = 4;
+ ibl.bootModes[1].u.nandBoot.nandInfo.lsbFirst = TRUE;
+ ibl.bootModes[1].u.nandBoot.nandInfo.blockOffset = 22;
+ ibl.bootModes[1].u.nandBoot.nandInfo.pageOffset = 16;
+ ibl.bootModes[1].u.nandBoot.nandInfo.columnOffset = 0;
+
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[0] = 0;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[1] = 1;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[2] = 2;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[3] = 3;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[4] = 4;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[5] = 6;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[6] = 7;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[7] = 13;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[8] = 14;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[9] = 15;
+
+ ibl.bootModes[1].u.nandBoot.nandInfo.badBlkMarkIdx[0]= 0;
+ ibl.bootModes[1].u.nandBoot.nandInfo.badBlkMarkIdx[1]= 0xff;
+
+ ibl.bootModes[1].u.nandBoot.nandInfo.resetCommand = 0xff;
+ ibl.bootModes[1].u.nandBoot.nandInfo.readCommandPre = 0;
+ ibl.bootModes[1].u.nandBoot.nandInfo.readCommandPost = 0;
+ ibl.bootModes[1].u.nandBoot.nandInfo.postCommand = FALSE;
+
+ /* bootMode[2] not configured */
+ ibl.bootModes[2].bootMode = ibl_BOOT_MODE_NONE;
+
+ ibl.chkSum = 0;
+}
+
+
+menuitem "EVM c6474 Mez IBL";
+
+hotmenu setConfig_c6474()
+{
+ ibl.iblMagic = ibl_MAGIC_VALUE;
+ ibl.iblEvmType = ibl_EVM_C6474M;
+
+ ibl.pllConfig[ibl_MAIN_PLL].doEnable = TRUE;
+ ibl.pllConfig[ibl_MAIN_PLL].prediv = 1;
+ ibl.pllConfig[ibl_MAIN_PLL].mult = 20;
+ ibl.pllConfig[ibl_MAIN_PLL].postdiv = 1;
+ ibl.pllConfig[ibl_MAIN_PLL].pllOutFreqMhz = 1000;
+
+ /* The DDR PLL. The multipliers/dividers are fixed, so are really dont cares */
+ ibl.pllConfig[ibl_DDR_PLL].doEnable = TRUE;
+
+ /* The network PLL. The multipliers/dividers are fixed */
+ ibl.pllConfig[ibl_NET_PLL].doEnable = TRUE;
+
+ /* EMIF configuration. The values are for DDR at 533 MHz */
+ ibl.ddrConfig.configDdr = TRUE;
+
+ ibl.ddrConfig.uEmif.emif3p1.sdcfg = 0x00d38a32; /* cas5, 8 banks, 10 bit column */
+ ibl.ddrConfig.uEmif.emif3p1.sdrfc = 0x00000a29; /* Refresh 333Mhz */
+ ibl.ddrConfig.uEmif.emif3p1.sdtim1 = 0x4d246c9a; /* Timing 1 */
+ ibl.ddrConfig.uEmif.emif3p1.sdtim2 = 0x00993c42; /* Timing 2 */
+ ibl.ddrConfig.uEmif.emif3p1.dmcctl = 0x50001906; /* PHY read latency for CAS 5 is 5 + 2 - 1 */
+
+ /* SGMII 0 is present */
+ ibl.sgmiiConfig[0].configure = TRUE;
+ ibl.sgmiiConfig[0].adviseAbility = 0x9801;
+ ibl.sgmiiConfig[0].control = 0x20;
+ ibl.sgmiiConfig[0].txConfig = 0x00000ea3;
+ ibl.sgmiiConfig[0].rxConfig = 0x00081023;
+ ibl.sgmiiConfig[0].auxConfig = 0x0000000b;
+
+ /* There is no port 1 on the 6474 */
+ ibl.sgmiiConfig[1].configure = FALSE;
+
+ /* MDIO configuration */
+ ibl.mdioConfig.nMdioOps = 8;
+ ibl.mdioConfig.mdioClkDiv = 0x26;
+ ibl.mdioConfig.interDelay = 2000; /* ~2ms at 1000 MHz */
+
+ ibl.mdioConfig.mdio[0] = (1 << 30) | ( 4 << 21) | (27 << 16) | 0x0081;
+ ibl.mdioConfig.mdio[1] = (1 << 30) | (26 << 21) | (14 << 16) | 0x0047;
+ ibl.mdioConfig.mdio[2] = (1 << 30) | (26 << 21) | (13 << 16) | 0x0047;
+ ibl.mdioConfig.mdio[3] = (1 << 30) | ( 0 << 21) | (14 << 16) | 0x8140;
+
+ ibl.mdioConfig.mdio[4] = (1 << 30) | ( 0 << 21) | (13 << 16) | 0x8140;
+ ibl.mdioConfig.mdio[5] = (1 << 30) | ( 1 << 21) | (22 << 16) | 0x043e;
+ ibl.mdioConfig.mdio[6] = (1 << 30) | ( 1 << 21) | (22 << 16) | 0x043e;
+ ibl.mdioConfig.mdio[7] = (1 << 30) | ( 0 << 21) | ( 1 << 16) | 0x9140;
+
+ /* spiConfig and emifConfig not needed */
+
+ /* Ethernet configuration for Boot mode 0 */
+ ibl.bootModes[0].bootMode = ibl_BOOT_MODE_TFTP;
+ ibl.bootModes[0].priority = ibl_HIGHEST_PRIORITY;
+ ibl.bootModes[0].port = 0;
+
+ /* Bootp is disabled. The server and file name are provided here */
+ ibl.bootModes[0].u.ethBoot.doBootp = FALSE;
+ ibl.bootModes[0].u.ethBoot.useBootpServerIp = TRUE;
+ ibl.bootModes[0].u.ethBoot.useBootpFileName = TRUE;
+ ibl.bootModes[0].u.ethBoot.bootFormat = ibl_BOOT_FORMAT_BBLOB;
+
+ SETIP(ibl.bootModes[0].u.ethBoot.ethInfo.ipAddr, 10,218,109,35);
+ SETIP(ibl.bootModes[0].u.ethBoot.ethInfo.serverIp, 10,218,109,196);
+ SETIP(ibl.bootModes[0].u.ethBoot.ethInfo.gatewayIp, 10,218,109,1);
+ SETIP(ibl.bootModes[0].u.ethBoot.ethInfo.netmask, 255,255,255,0);
+
+ /* Set the hardware address as 0 so the e-fuse value will be used */
+ ibl.bootModes[0].u.ethBoot.ethInfo.hwAddress[0] = 0;
+ ibl.bootModes[0].u.ethBoot.ethInfo.hwAddress[1] = 0;
+ ibl.bootModes[0].u.ethBoot.ethInfo.hwAddress[2] = 0;
+ ibl.bootModes[0].u.ethBoot.ethInfo.hwAddress[3] = 0;
+ ibl.bootModes[0].u.ethBoot.ethInfo.hwAddress[4] = 0;
+ ibl.bootModes[0].u.ethBoot.ethInfo.hwAddress[5] = 0;
+
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[0] = 'c';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[1] = '6';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[2] = '4';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[3] = '7';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[4] = '4';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[5] = '-';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[6] = 'l';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[7] = 'e';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[8] = '.';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[9] = 'b';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[10] = 'i';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[11] = 'n';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[12] = '\0';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[13] = '\0';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[14] = '\0';
+
+ /* Even though the entire range of DDR2 is chosen, the load will
+ * stop when the ftp reaches the end of the file */
+ ibl.bootModes[0].u.ethBoot.blob.startAddress = 0x80000000; /* Base address of DDR2 */
+ ibl.bootModes[0].u.ethBoot.blob.sizeBytes = 0x20000000; /* All of DDR2 */
+ ibl.bootModes[0].u.ethBoot.blob.branchAddress = 0x80000000; /* Base of DDR2 */
+
+ /* Alternative bootMode not configured for now */
+ ibl.bootModes[1].bootMode = ibl_BOOT_MODE_NONE;
+
+ ibl.chkSum = 0;
+}
+
+menuitem "EVM c6474 Lite EVM IBL";
+
+hotmenu setConfig_c6474lite()
+{
+ ibl.iblMagic = ibl_MAGIC_VALUE;
+ ibl.iblEvmType = ibl_EVM_C6474L;
+
+ ibl.pllConfig[ibl_MAIN_PLL].doEnable = TRUE;
+ ibl.pllConfig[ibl_MAIN_PLL].prediv = 1;
+ ibl.pllConfig[ibl_MAIN_PLL].mult = 20;
+ ibl.pllConfig[ibl_MAIN_PLL].postdiv = 1;
+ ibl.pllConfig[ibl_MAIN_PLL].pllOutFreqMhz = 1000;
+
+ /* The DDR PLL. The multipliers/dividers are fixed, so are really dont cares */
+ ibl.pllConfig[ibl_DDR_PLL].doEnable = TRUE;
+
+ /* The network PLL. The multipliers/dividers are fixed */
+ ibl.pllConfig[ibl_NET_PLL].doEnable = TRUE;
+
+ /* EMIF configuration. The values are for DDR at 533 MHz */
+ ibl.ddrConfig.configDdr = TRUE;
+
+ ibl.ddrConfig.uEmif.emif3p1.sdcfg = 0x00d38a32; /* cas5, 8 banks, 10 bit column */
+ ibl.ddrConfig.uEmif.emif3p1.sdrfc = 0x00000a29; /* Refresh 333Mhz */
+ ibl.ddrConfig.uEmif.emif3p1.sdtim1 = 0x4d246c9a; /* Timing 1 */
+ ibl.ddrConfig.uEmif.emif3p1.sdtim2 = 0x00993c42; /* Timing 2 */
+ ibl.ddrConfig.uEmif.emif3p1.dmcctl = 0x50001906; /* PHY read latency for CAS 5 is 5 + 2 - 1 */
+
+ /* SGMII 0 is present */
+ ibl.sgmiiConfig[0].configure = TRUE;
+ ibl.sgmiiConfig[0].adviseAbility = 0x9801;
+ ibl.sgmiiConfig[0].control = 0x20;
+ ibl.sgmiiConfig[0].txConfig = 0x00000e23;
+ ibl.sgmiiConfig[0].rxConfig = 0x00081023;
+ ibl.sgmiiConfig[0].auxConfig = 0x0000000b;
+
+ /* There is no port 1 on the 6474 */
+ ibl.sgmiiConfig[1].configure = FALSE;
+
+ /* MDIO configuration */
+ ibl.mdioConfig.nMdioOps = 5;
+ ibl.mdioConfig.mdioClkDiv = 0x20;
+ ibl.mdioConfig.interDelay = 2000; /* ~2ms at 1000 MHz */
+
+ ibl.mdioConfig.mdio[0] = (1 << 30) | ( 4 << 21) | (27 << 16) | 0x0081;
+ ibl.mdioConfig.mdio[1] = (1 << 30) | (26 << 21) | (14 << 16) | 0x0047;
+ ibl.mdioConfig.mdio[2] = (1 << 30) | ( 0 << 21) | (14 << 16) | 0x8140;
+
+ ibl.mdioConfig.mdio[3] = (1 << 30) | ( 1 << 21) | (22 << 16) | 0x043e;
+ ibl.mdioConfig.mdio[4] = (1 << 30) | ( 0 << 21) | ( 1 << 16) | 0x9140;
+
+ /* spiConfig and emifConfig not needed */
+
+ /* Ethernet configuration for Boot mode 0 */
+ ibl.bootModes[0].bootMode = ibl_BOOT_MODE_TFTP;
+ ibl.bootModes[0].priority = ibl_HIGHEST_PRIORITY;
+ ibl.bootModes[0].port = 0;
+
+ /* Bootp is disabled. The server and file name are provided here */
+ ibl.bootModes[0].u.ethBoot.doBootp = FALSE;
+ ibl.bootModes[0].u.ethBoot.useBootpServerIp = TRUE;
+ ibl.bootModes[0].u.ethBoot.useBootpFileName = TRUE;
+ ibl.bootModes[0].u.ethBoot.bootFormat = ibl_BOOT_FORMAT_BBLOB;
+
+ SETIP(ibl.bootModes[0].u.ethBoot.ethInfo.ipAddr, 158,218,100,114);
+ SETIP(ibl.bootModes[0].u.ethBoot.ethInfo.serverIp, 158,218,100,25);
+ SETIP(ibl.bootModes[0].u.ethBoot.ethInfo.gatewayIp, 158,218,100,2);
+ SETIP(ibl.bootModes[0].u.ethBoot.ethInfo.netmask, 255,255,255,0);
+
+ /* Set the hardware address as 0 so the e-fuse value will be used */
+ ibl.bootModes[0].u.ethBoot.ethInfo.hwAddress[0] = 0;
+ ibl.bootModes[0].u.ethBoot.ethInfo.hwAddress[1] = 0;
+ ibl.bootModes[0].u.ethBoot.ethInfo.hwAddress[2] = 0;
+ ibl.bootModes[0].u.ethBoot.ethInfo.hwAddress[3] = 0;
+ ibl.bootModes[0].u.ethBoot.ethInfo.hwAddress[4] = 0;
+ ibl.bootModes[0].u.ethBoot.ethInfo.hwAddress[5] = 0;
+
+
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[0] = 'c';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[1] = '6';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[2] = '4';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[3] = '7';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[4] = '4';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[5] = 'l';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[6] = '-';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[7] = 'l';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[8] = 'e';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[9] = '.';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[10] = 'b';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[11] = 'i';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[12] = 'n';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[13] = '\0';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[14] = '\0';
+
+
+ /* Even though the entire range of DDR2 is chosen, the load will
+ * stop when the ftp reaches the end of the file */
+ ibl.bootModes[0].u.ethBoot.blob.startAddress = 0x80000000; /* Base address of DDR2 */
+ ibl.bootModes[0].u.ethBoot.blob.sizeBytes = 0x20000000; /* All of DDR2 */
+ ibl.bootModes[0].u.ethBoot.blob.branchAddress = 0x80000000; /* Base of DDR2 */
+
+ ibl.bootModes[1].bootMode = ibl_BOOT_MODE_NAND;
+ ibl.bootModes[1].priority = ibl_HIGHEST_PRIORITY;
+ ibl.bootModes[1].port = 0;
+
+ ibl.bootModes[1].u.nandBoot.bootFormat = ibl_BOOT_FORMAT_BBLOB;
+ ibl.bootModes[1].u.nandBoot.bootAddress[0][0] = 0x200000; /* Image 0 NAND offset address (block 1) in LE mode */
+ ibl.bootModes[1].u.nandBoot.bootAddress[0][1] = 0x4000000; /* Image 1 NAND offset address (block 2048) in LE mode */
+ ibl.bootModes[1].u.nandBoot.bootAddress[1][0] = 0x200000; /* Image 0 NAND offset address (block 1) in BE mode */
+ ibl.bootModes[1].u.nandBoot.bootAddress[1][1] = 0x4000000; /* Image 1 NAND offset address (block 2048) in BE mode */
+ ibl.bootModes[1].u.nandBoot.interface = ibl_PMEM_IF_GPIO;
+
+ ibl.bootModes[1].u.nandBoot.blob[0][0].startAddress = 0x80000000; /* Image 0 load start address in LE mode */
+ ibl.bootModes[1].u.nandBoot.blob[0][0].sizeBytes = 0xA00000; /* Image 0 size (10 MB) in LE mode */
+ ibl.bootModes[1].u.nandBoot.blob[0][0].branchAddress = 0x80000000; /* Image 0 branch address after loading in LE mode */
+ ibl.bootModes[1].u.nandBoot.blob[0][1].startAddress = 0x80000000; /* Image 1 load start address in LE mode */
+ ibl.bootModes[1].u.nandBoot.blob[0][1].sizeBytes = 0xA00000; /* Image 1 size (10 MB) in LE mode */
+ ibl.bootModes[1].u.nandBoot.blob[0][1].branchAddress = 0x80000000; /* Image 1 branch address after loading in LE mode */
+ ibl.bootModes[1].u.nandBoot.blob[1][0].startAddress = 0x80000000; /* Image 0 load start address in BE mode */
+ ibl.bootModes[1].u.nandBoot.blob[1][0].sizeBytes = 0xA00000; /* Image 0 size (10 MB) in BE mode */
+ ibl.bootModes[1].u.nandBoot.blob[1][0].branchAddress = 0x80000000; /* Image 0 branch address after loading in BE mode */
+ ibl.bootModes[1].u.nandBoot.blob[1][1].startAddress = 0x80000000; /* Image 1 load start address in BE mode */
+ ibl.bootModes[1].u.nandBoot.blob[1][1].sizeBytes = 0xA00000; /* Image 1 size (10 MB) in BE mode */
+ ibl.bootModes[1].u.nandBoot.blob[1][1].branchAddress = 0x80000000; /* Image 1 branch address after loading in BE mode */
+
+
+ ibl.bootModes[1].u.nandBoot.nandInfo.busWidthBits = 8;
+ ibl.bootModes[1].u.nandBoot.nandInfo.pageSizeBytes = 2048;
+ ibl.bootModes[1].u.nandBoot.nandInfo.pageEccBytes = 64;
+ ibl.bootModes[1].u.nandBoot.nandInfo.pagesPerBlock = 64;
+ ibl.bootModes[1].u.nandBoot.nandInfo.totalBlocks = 512;
+
+ ibl.bootModes[1].u.nandBoot.nandInfo.addressBytes = 4;
+ ibl.bootModes[1].u.nandBoot.nandInfo.lsbFirst = TRUE;
+ ibl.bootModes[1].u.nandBoot.nandInfo.blockOffset = 22;
+ ibl.bootModes[1].u.nandBoot.nandInfo.pageOffset = 16;
+ ibl.bootModes[1].u.nandBoot.nandInfo.columnOffset = 0;
+
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[0] = 0;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[1] = 1;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[2] = 2;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[3] = 3;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[4] = 4;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[5] = 6;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[6] = 7;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[7] = 13;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[8] = 14;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[9] = 15;
+
+ ibl.bootModes[1].u.nandBoot.nandInfo.badBlkMarkIdx[0]= 0;
+ ibl.bootModes[1].u.nandBoot.nandInfo.badBlkMarkIdx[1]= 0xff;
+
+ ibl.bootModes[1].u.nandBoot.nandInfo.resetCommand = 0xff;
+ ibl.bootModes[1].u.nandBoot.nandInfo.readCommandPre = 0;
+ ibl.bootModes[1].u.nandBoot.nandInfo.readCommandPost = 0;
+ ibl.bootModes[1].u.nandBoot.nandInfo.postCommand = FALSE;
+
+
+ /* bootMode[2] not configured */
+ ibl.bootModes[2].bootMode = ibl_BOOT_MODE_NONE;
+
+ ibl.chkSum = 0;
+}
+
+menuitem "EVM c6457 EVM IBL";
+
+hotmenu setConfig_c6457()
+{
+ ibl.iblMagic = ibl_MAGIC_VALUE;
+ ibl.iblEvmType = ibl_EVM_C6457L;
+
+ ibl.pllConfig[ibl_MAIN_PLL].doEnable = TRUE;
+ ibl.pllConfig[ibl_MAIN_PLL].prediv = 1;
+ ibl.pllConfig[ibl_MAIN_PLL].mult = 20;
+ ibl.pllConfig[ibl_MAIN_PLL].postdiv = 1;
+ ibl.pllConfig[ibl_MAIN_PLL].pllOutFreqMhz = 1000;
+
+ /* The DDR PLL. The multipliers/dividers are fixed, so are really dont cares */
+ ibl.pllConfig[ibl_DDR_PLL].doEnable = TRUE;
+
+ /* The network PLL. The multipliers/dividers are fixed */
+ ibl.pllConfig[ibl_NET_PLL].doEnable = TRUE;
+
+ /* EMIF configuration */
+ ibl.ddrConfig.configDdr = TRUE;
+
+ ibl.ddrConfig.uEmif.emif3p1.sdcfg = 0x00d38a32; /* cas5, 8 banks, 10 bit column */
+ ibl.ddrConfig.uEmif.emif3p1.sdrfc = 0x00000a0e; /* Refresh 333Mhz */
+ ibl.ddrConfig.uEmif.emif3p1.sdtim1 = 0x832474da; /* Timing 1 */
+ ibl.ddrConfig.uEmif.emif3p1.sdtim2 = 0x0144c742; /* Timing 2 */
+ ibl.ddrConfig.uEmif.emif3p1.dmcctl = 0x001800C6;
+
+ /* SGMII 0 is present */
+ ibl.sgmiiConfig[0].configure = TRUE;
+ ibl.sgmiiConfig[0].adviseAbility = 0x9801;
+ ibl.sgmiiConfig[0].control = 0x20;
+ ibl.sgmiiConfig[0].txConfig = 0x00000e21;
+ ibl.sgmiiConfig[0].rxConfig = 0x00081021;
+ ibl.sgmiiConfig[0].auxConfig = 0x0000000b;
+
+ /* There is no port 1 on the 6457 */
+ ibl.sgmiiConfig[1].configure = FALSE;
+
+ /* MDIO configuration */
+ ibl.mdioConfig.nMdioOps = 5;
+ ibl.mdioConfig.mdioClkDiv = 0xa5;
+ ibl.mdioConfig.interDelay = 3000; /* ~2ms at 1000 MHz */
+
+ ibl.mdioConfig.mdio[0] = (1 << 30) | ( 4 << 21) | (27 << 16) | 0x0081;
+ ibl.mdioConfig.mdio[1] = (1 << 30) | (26 << 21) | (14 << 16) | 0x0047;
+ ibl.mdioConfig.mdio[2] = (1 << 30) | ( 0 << 21) | (14 << 16) | 0x8140;
+ ibl.mdioConfig.mdio[3] = (1 << 30) | ( 1 << 21) | (22 << 16) | 0x043e;
+ ibl.mdioConfig.mdio[4] = (1 << 30) | ( 0 << 21) | ( 1 << 16) | 0x9140;
+
+ /* spiConfig and emifConfig not needed */
+
+ /* Ethernet configuration for Boot mode 0 */
+ ibl.bootModes[0].bootMode = ibl_BOOT_MODE_TFTP;
+ ibl.bootModes[0].priority = ibl_HIGHEST_PRIORITY;
+ ibl.bootModes[0].port = 0;
+
+ /* Bootp is disabled. The server and file name are provided here */
+ ibl.bootModes[0].u.ethBoot.doBootp = FALSE;
+ ibl.bootModes[0].u.ethBoot.useBootpServerIp = TRUE;
+ ibl.bootModes[0].u.ethBoot.useBootpFileName = TRUE;
+ ibl.bootModes[0].u.ethBoot.bootFormat = ibl_BOOT_FORMAT_BBLOB;
+
+ SETIP(ibl.bootModes[0].u.ethBoot.ethInfo.ipAddr, 158,218,100,115);
+ SETIP(ibl.bootModes[0].u.ethBoot.ethInfo.serverIp, 158,218,100,25);
+ SETIP(ibl.bootModes[0].u.ethBoot.ethInfo.gatewayIp, 158,218,100,2);
+ SETIP(ibl.bootModes[0].u.ethBoot.ethInfo.netmask, 255,255,255,0);
+
+ /* Set the hardware address as 0 so the e-fuse value will be used */
+ ibl.bootModes[0].u.ethBoot.ethInfo.hwAddress[0] = 0;
+ ibl.bootModes[0].u.ethBoot.ethInfo.hwAddress[1] = 0;
+ ibl.bootModes[0].u.ethBoot.ethInfo.hwAddress[2] = 0;
+ ibl.bootModes[0].u.ethBoot.ethInfo.hwAddress[3] = 0;
+ ibl.bootModes[0].u.ethBoot.ethInfo.hwAddress[4] = 0;
+ ibl.bootModes[0].u.ethBoot.ethInfo.hwAddress[5] = 0;
+
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[0] = 'c';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[1] = '6';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[2] = '4';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[3] = '5';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[4] = '7';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[5] = '-';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[6] = 'l';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[7] = 'e';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[8] = '.';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[9] = 'b';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[10] = 'i';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[11] = 'n';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[12] = '\0';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[13] = '\0';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[14] = '\0';
+
+
+ /* Even though the entire range of DDR2 is chosen, the load will
+ * stop when the ftp reaches the end of the file */
+ ibl.bootModes[0].u.ethBoot.blob.startAddress = 0xe0000000; /* Base address of DDR2 */
+ ibl.bootModes[0].u.ethBoot.blob.sizeBytes = 0x20000000; /* All of DDR2 */
+ ibl.bootModes[0].u.ethBoot.blob.branchAddress = 0xe0000000; /* Base of DDR2 */
+
+ ibl.bootModes[1].bootMode = ibl_BOOT_MODE_NAND;
+ ibl.bootModes[1].priority = ibl_HIGHEST_PRIORITY;
+ ibl.bootModes[1].port = 0;
+
+ ibl.bootModes[1].u.nandBoot.bootFormat = ibl_BOOT_FORMAT_BBLOB;
+ ibl.bootModes[1].u.nandBoot.bootAddress[0][0] = 0x200000; /* Image 0 NAND offset address (block 1) in LE mode */
+ ibl.bootModes[1].u.nandBoot.bootAddress[0][1] = 0x4000000; /* Image 1 NAND offset address (block 2048) in LE mode */
+ ibl.bootModes[1].u.nandBoot.bootAddress[1][0] = 0x200000; /* Image 0 NAND offset address (block 1) in BE mode */
+ ibl.bootModes[1].u.nandBoot.bootAddress[1][1] = 0x4000000; /* Image 1 NAND offset address (block 2048) in BE mode */
+ ibl.bootModes[1].u.nandBoot.interface = ibl_PMEM_IF_GPIO;
+
+ ibl.bootModes[1].u.nandBoot.blob[0][0].startAddress = 0xe0000000; /* Image 0 load start address in LE mode */
+ ibl.bootModes[1].u.nandBoot.blob[0][0].sizeBytes = 0xA00000; /* Image 0 size (10 MB) in LE mode */
+ ibl.bootModes[1].u.nandBoot.blob[0][0].branchAddress = 0xe0000000; /* Image 0 branch address after loading in LE mode */
+ ibl.bootModes[1].u.nandBoot.blob[0][1].startAddress = 0xe0000000; /* Image 1 load start address in LE mode */
+ ibl.bootModes[1].u.nandBoot.blob[0][1].sizeBytes = 0xA00000; /* Image 1 size (10 MB) in LE mode */
+ ibl.bootModes[1].u.nandBoot.blob[0][1].branchAddress = 0xe0000000; /* Image 1 branch address after loading in LE mode */
+ ibl.bootModes[1].u.nandBoot.blob[1][0].startAddress = 0xe0000000; /* Image 0 load start address in BE mode */
+ ibl.bootModes[1].u.nandBoot.blob[1][0].sizeBytes = 0xA00000; /* Image 0 size (10 MB) in BE mode */
+ ibl.bootModes[1].u.nandBoot.blob[1][0].branchAddress = 0xe0000000; /* Image 0 branch address after loading in BE mode */
+ ibl.bootModes[1].u.nandBoot.blob[1][1].startAddress = 0xe0000000; /* Image 1 load start address in BE mode */
+ ibl.bootModes[1].u.nandBoot.blob[1][1].sizeBytes = 0xA00000; /* Image 1 size (10 MB) in BE mode */
+ ibl.bootModes[1].u.nandBoot.blob[1][1].branchAddress = 0xe0000000; /* Image 1 branch address after loading in BE mode */
+
+
+ ibl.bootModes[1].u.nandBoot.nandInfo.busWidthBits = 8;
+ ibl.bootModes[1].u.nandBoot.nandInfo.pageSizeBytes = 2048;
+ ibl.bootModes[1].u.nandBoot.nandInfo.pageEccBytes = 64;
+ ibl.bootModes[1].u.nandBoot.nandInfo.pagesPerBlock = 64;
+ ibl.bootModes[1].u.nandBoot.nandInfo.totalBlocks = 512;
+
+ ibl.bootModes[1].u.nandBoot.nandInfo.addressBytes = 4;
+ ibl.bootModes[1].u.nandBoot.nandInfo.lsbFirst = TRUE;
+ ibl.bootModes[1].u.nandBoot.nandInfo.blockOffset = 22;
+ ibl.bootModes[1].u.nandBoot.nandInfo.pageOffset = 16;
+ ibl.bootModes[1].u.nandBoot.nandInfo.columnOffset = 0;
+
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[0] = 0;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[1] = 1;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[2] = 2;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[3] = 3;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[4] = 4;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[5] = 6;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[6] = 7;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[7] = 13;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[8] = 14;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[9] = 15;
+
+ ibl.bootModes[1].u.nandBoot.nandInfo.badBlkMarkIdx[0]= 0;
+ ibl.bootModes[1].u.nandBoot.nandInfo.badBlkMarkIdx[1]= 0xff;
+
+ ibl.bootModes[1].u.nandBoot.nandInfo.resetCommand = 0xff;
+ ibl.bootModes[1].u.nandBoot.nandInfo.readCommandPre = 0;
+ ibl.bootModes[1].u.nandBoot.nandInfo.readCommandPost = 0;
+ ibl.bootModes[1].u.nandBoot.nandInfo.postCommand = FALSE;
+
+
+ /* bootMode[2] not configured */
+ ibl.bootModes[2].bootMode = ibl_BOOT_MODE_NONE;
+
+ ibl.chkSum = 0;
+}
+
+menuitem "EVM c6455 IBL";
+
+hotmenu setConfig_c6455()
+{
+ ibl.iblMagic = ibl_MAGIC_VALUE;
+ ibl.iblEvmType = ibl_EVM_C6455L;
+
+ ibl.pllConfig[ibl_MAIN_PLL].doEnable = TRUE;
+ ibl.pllConfig[ibl_MAIN_PLL].prediv = 1;
+ ibl.pllConfig[ibl_MAIN_PLL].mult = 20;
+ ibl.pllConfig[ibl_MAIN_PLL].postdiv = 1;
+ ibl.pllConfig[ibl_MAIN_PLL].pllOutFreqMhz = 1000;
+
+ /* The DDR PLL. The multipliers/dividers are fixed, so are really dont cares */
+ ibl.pllConfig[ibl_DDR_PLL].doEnable = TRUE;
+
+ /* The network PLL. The multipliers/dividers are fixed */
+ ibl.pllConfig[ibl_NET_PLL].doEnable = TRUE;
+
+ /* EMIF configuration. The values are for DDR at 500 MHz */
+ ibl.ddrConfig.configDdr = TRUE;
+
+ ibl.ddrConfig.uEmif.emif3p1.sdcfg = 0x00538822; /* timing, 32bit wide */
+ ibl.ddrConfig.uEmif.emif3p1.sdrfc = 0x000007a2; /* Refresh 500Mhz */
+ ibl.ddrConfig.uEmif.emif3p1.sdtim1 = 0x3edb4b91; /* Timing 1 */
+ ibl.ddrConfig.uEmif.emif3p1.sdtim2 = 0x00a2c722; /* Timing 2 */
+ ibl.ddrConfig.uEmif.emif3p1.dmcctl = 0x00000005; /* PHY read latency for CAS 4 is 4 + 2 - 1 */
+
+ /* SGMII not present */
+ ibl.sgmiiConfig[0].configure = FALSE;
+ ibl.sgmiiConfig[1].configure = FALSE;
+
+ /* MDIO configuration */
+ ibl.mdioConfig.nMdioOps = 0;
+ ibl.mdioConfig.mdioClkDiv = 0x20;
+ ibl.mdioConfig.interDelay = 2000; /* ~2ms at 1000 MHz */
+
+ ibl.mdioConfig.mdio[0] = (1 << 30) | (14 << 21) | (0 << 16) | 0xd5d0;
+
+ /* spiConfig and emifConfig not needed */
+
+ /* Ethernet configuration for Boot mode 0 */
+ ibl.bootModes[0].bootMode = ibl_BOOT_MODE_TFTP;
+ ibl.bootModes[0].priority = ibl_HIGHEST_PRIORITY;
+ ibl.bootModes[0].port = 0;
+
+ /* Bootp is disabled. The server and file name are provided here */
+ ibl.bootModes[0].u.ethBoot.doBootp = FALSE;
+ ibl.bootModes[0].u.ethBoot.useBootpServerIp = TRUE;
+ ibl.bootModes[0].u.ethBoot.useBootpFileName = TRUE;
+ ibl.bootModes[0].u.ethBoot.bootFormat = ibl_BOOT_FORMAT_BBLOB;
+
+ SETIP(ibl.bootModes[0].u.ethBoot.ethInfo.ipAddr, 158,218,100,118);
+ SETIP(ibl.bootModes[0].u.ethBoot.ethInfo.serverIp, 158,218,100,25);
+ SETIP(ibl.bootModes[0].u.ethBoot.ethInfo.gatewayIp, 158,218,100,2);
+ SETIP(ibl.bootModes[0].u.ethBoot.ethInfo.netmask, 255,255,255,0);
+
+ /* There is no e-fuse mac address. A value must be assigned */
+ ibl.bootModes[0].u.ethBoot.ethInfo.hwAddress[0] = 10;
+ ibl.bootModes[0].u.ethBoot.ethInfo.hwAddress[1] = 224;
+ ibl.bootModes[0].u.ethBoot.ethInfo.hwAddress[2] = 166;
+ ibl.bootModes[0].u.ethBoot.ethInfo.hwAddress[3] = 102;
+ ibl.bootModes[0].u.ethBoot.ethInfo.hwAddress[4] = 87;
+ ibl.bootModes[0].u.ethBoot.ethInfo.hwAddress[5] = 25;
+
+
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[0] = 'c';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[1] = '6';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[2] = '4';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[3] = '5';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[4] = '5';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[5] = '-';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[6] = 'l';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[7] = 'e';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[8] = '.';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[9] = 'b';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[10] = 'i';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[11] = 'n';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[12] = '\0';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[13] = '\0';
+ ibl.bootModes[0].u.ethBoot.ethInfo.fileName[14] = '\0';
+
+ /* Even though the entire range of DDR2 is chosen, the load will
+ * stop when the ftp reaches the end of the file */
+ ibl.bootModes[0].u.ethBoot.blob.startAddress = 0xe0000000; /* Base address of DDR2 */
+ ibl.bootModes[0].u.ethBoot.blob.sizeBytes = 0x20000000; /* All of DDR2 */
+ ibl.bootModes[0].u.ethBoot.blob.branchAddress = 0xe0000000; /* Base of DDR2 */
+
+ /* Alternative bootMode not configured for now */
+ ibl.bootModes[1].bootMode = ibl_BOOT_MODE_NONE;
+
+ ibl.chkSum = 0;
+}
+
+
+menuitem "EVM c6678 IBL";
+
+hotmenu setConfig_c6678_main()
+{
+ ibl.iblMagic = ibl_MAGIC_VALUE;
+ ibl.iblEvmType = ibl_EVM_C6678L;
+
+ /* Main PLL: 100 MHz reference, 1GHz output */
+ ibl.pllConfig[ibl_MAIN_PLL].doEnable = 1;
+ ibl.pllConfig[ibl_MAIN_PLL].prediv = 1;
+ ibl.pllConfig[ibl_MAIN_PLL].mult = 20;
+ ibl.pllConfig[ibl_MAIN_PLL].postdiv = 2;
+ ibl.pllConfig[ibl_MAIN_PLL].pllOutFreqMhz = 1000;
+
+ /* DDR PLL: 66.66 MHz reference, 400 MHz output, for an 800MHz DDR rate */
+ ibl.pllConfig[ibl_DDR_PLL].doEnable = 1;
+ ibl.pllConfig[ibl_DDR_PLL].prediv = 1;
+ ibl.pllConfig[ibl_DDR_PLL].mult = 20;
+ ibl.pllConfig[ibl_DDR_PLL].postdiv = 2;
+ ibl.pllConfig[ibl_DDR_PLL].pllOutFreqMhz = 1333;
+
+ /* Net PLL: 100 MHz reference, 1050 MHz output (followed by a built in divide by 3 to give 350 MHz to PA) */
+ ibl.pllConfig[ibl_NET_PLL].doEnable = 1;
+ ibl.pllConfig[ibl_NET_PLL].prediv = 1;
+ ibl.pllConfig[ibl_NET_PLL].mult = 21;
+ ibl.pllConfig[ibl_NET_PLL].postdiv = 2;
+ ibl.pllConfig[ibl_NET_PLL].pllOutFreqMhz = 1050;
+
+
+ ibl.ddrConfig.configDdr = 1;
+ ibl.ddrConfig.uEmif.emif4p0.registerMask = ibl_EMIF4_ENABLE_sdRamConfig | ibl_EMIF4_ENABLE_sdRamRefreshCtl | ibl_EMIF4_ENABLE_sdRamTiming1 | ibl_EMIF4_ENABLE_sdRamTiming2 | ibl_EMIF4_ENABLE_sdRamTiming3 | ibl_EMIF4_ENABLE_ddrPhyCtl1;
+
+ ibl.ddrConfig.uEmif.emif4p0.sdRamConfig = 0x63C452B2;
+ ibl.ddrConfig.uEmif.emif4p0.sdRamConfig2 = 0;
+ ibl.ddrConfig.uEmif.emif4p0.sdRamRefreshCtl = 0x000030D4;
+ ibl.ddrConfig.uEmif.emif4p0.sdRamTiming1 = 0x0AAAE51B;
+ ibl.ddrConfig.uEmif.emif4p0.sdRamTiming2 = 0x2A2F7FDA;
+ ibl.ddrConfig.uEmif.emif4p0.sdRamTiming3 = 0x057F82B8;
+ ibl.ddrConfig.uEmif.emif4p0.lpDdrNvmTiming = 0;
+ ibl.ddrConfig.uEmif.emif4p0.powerManageCtl = 0;
+ ibl.ddrConfig.uEmif.emif4p0.iODFTTestLogic = 0;
+ ibl.ddrConfig.uEmif.emif4p0.performCountCfg = 0;
+ ibl.ddrConfig.uEmif.emif4p0.performCountMstRegSel = 0;
+ ibl.ddrConfig.uEmif.emif4p0.readIdleCtl = 0;
+ ibl.ddrConfig.uEmif.emif4p0.sysVbusmIntEnSet = 0;
+ ibl.ddrConfig.uEmif.emif4p0.sdRamOutImpdedCalCfg = 0;
+ ibl.ddrConfig.uEmif.emif4p0.tempAlterCfg = 0;
+ ibl.ddrConfig.uEmif.emif4p0.ddrPhyCtl1 = 0x0010010d;
+ ibl.ddrConfig.uEmif.emif4p0.ddrPhyCtl2 = 0;
+ ibl.ddrConfig.uEmif.emif4p0.priClassSvceMap = 0;
+ ibl.ddrConfig.uEmif.emif4p0.mstId2ClsSvce1Map = 0;
+ ibl.ddrConfig.uEmif.emif4p0.mstId2ClsSvce2Map = 0;
+ ibl.ddrConfig.uEmif.emif4p0.eccCtl = 0;
+ ibl.ddrConfig.uEmif.emif4p0.eccRange1 = 0;
+ ibl.ddrConfig.uEmif.emif4p0.eccRange2 = 0;
+ ibl.ddrConfig.uEmif.emif4p0.rdWrtExcThresh = 0;
+
+
+ ibl.sgmiiConfig[0].configure = 1;
+ ibl.sgmiiConfig[0].adviseAbility = 1;
+ ibl.sgmiiConfig[0].control = 1;
+ ibl.sgmiiConfig[0].txConfig = 0x108a1;
+ ibl.sgmiiConfig[0].rxConfig = 0x700621;
+ ibl.sgmiiConfig[0].auxConfig = 0x41;
+
+ ibl.sgmiiConfig[1].configure = 1;
+ ibl.sgmiiConfig[1].adviseAbility = 1;
+ ibl.sgmiiConfig[1].control = 1;
+ ibl.sgmiiConfig[1].txConfig = 0x108a1;
+ ibl.sgmiiConfig[1].rxConfig = 0x700621;
+ ibl.sgmiiConfig[1].auxConfig = 0x41;
+
+ ibl.mdioConfig.nMdioOps = 0;
+
+ ibl.spiConfig.addrWidth = 24;
+ ibl.spiConfig.nPins = 5;
+ ibl.spiConfig.mode = 1;
+ ibl.spiConfig.csel = 2;
+ ibl.spiConfig.c2tdelay = 1;
+ ibl.spiConfig.busFreqMHz = 20;
+
+ ibl.emifConfig[0].csSpace = 2;
+ ibl.emifConfig[0].busWidth = 8;
+ ibl.emifConfig[0].waitEnable = 0;
+
+ ibl.emifConfig[1].csSpace = 0;
+ ibl.emifConfig[1].busWidth = 0;
+ ibl.emifConfig[1].waitEnable = 0;
+
+ ibl.bootModes[0].bootMode = ibl_BOOT_MODE_NOR;
+ ibl.bootModes[0].priority = ibl_HIGHEST_PRIORITY;
+ ibl.bootModes[0].port = 0;
+
+ ibl.bootModes[0].u.norBoot.bootFormat = ibl_BOOT_FORMAT_ELF;
+ ibl.bootModes[0].u.norBoot.bootAddress[0][0] = 0; /* Image 0 NOR offset byte address in LE mode */
+ ibl.bootModes[0].u.norBoot.bootAddress[0][1] = 0xA00000; /* Image 1 NOR offset byte address in LE mode */
+ ibl.bootModes[0].u.norBoot.bootAddress[1][0] = 0; /* Image 0 NOR offset byte address in BE mode */
+ ibl.bootModes[0].u.norBoot.bootAddress[1][1] = 0xA00000; /* Image 1 NOR offset byte address in BE mode */
+ ibl.bootModes[0].u.norBoot.interface = ibl_PMEM_IF_SPI;
+ ibl.bootModes[0].u.norBoot.blob[0][0].startAddress = 0x80000000; /* Image 0 load start address in LE mode */
+ ibl.bootModes[0].u.norBoot.blob[0][0].sizeBytes = 0xA00000; /* Image 0 size (10 MB) in LE mode */
+ ibl.bootModes[0].u.norBoot.blob[0][0].branchAddress = 0x80000000; /* Image 0 branch address after loading in LE mode */
+ ibl.bootModes[0].u.norBoot.blob[0][1].startAddress = 0x80000000; /* Image 1 load start address in LE mode */
+ ibl.bootModes[0].u.norBoot.blob[0][1].sizeBytes = 0xA00000; /* Image 1 size (10 MB) in LE mode */
+ ibl.bootModes[0].u.norBoot.blob[0][1].branchAddress = 0x80000000; /* Image 1 branch address after loading in LE mode */
+ ibl.bootModes[0].u.norBoot.blob[1][0].startAddress = 0x80000000; /* Image 0 load start address in BE mode */
+ ibl.bootModes[0].u.norBoot.blob[1][0].sizeBytes = 0xA00000; /* Image 0 size (10 MB) in BE mode */
+ ibl.bootModes[0].u.norBoot.blob[1][0].branchAddress = 0x80000000; /* Image 0 branch address after loading in BE mode */
+ ibl.bootModes[0].u.norBoot.blob[1][1].startAddress = 0x80000000; /* Image 1 load start address in BE mode */
+ ibl.bootModes[0].u.norBoot.blob[1][1].sizeBytes = 0xA00000; /* Image 1 size (10 MB) in BE mode */
+ ibl.bootModes[0].u.norBoot.blob[1][1].branchAddress = 0x80000000; /* Image 1 branch address after loading in BE mode */
+
+ ibl.bootModes[1].bootMode = ibl_BOOT_MODE_NAND;
+ ibl.bootModes[1].priority = ibl_HIGHEST_PRIORITY;
+ ibl.bootModes[1].port = 0;
+
+ ibl.bootModes[1].u.nandBoot.bootFormat = ibl_BOOT_FORMAT_BBLOB;
+ ibl.bootModes[1].u.nandBoot.bootAddress[0][0] = 0x4000; /* Image 0 NAND offset address (block 1) in LE mode */
+ ibl.bootModes[1].u.nandBoot.bootAddress[0][1] = 0x2000000; /* Image 1 NAND offset address (block 2048) in LE mode */
+ ibl.bootModes[1].u.nandBoot.bootAddress[1][0] = 0x4000; /* Image 0 NAND offset address (block 1) in BE mode */
+ ibl.bootModes[1].u.nandBoot.bootAddress[1][1] = 0x2000000; /* Image 1 NAND offset address (block 2048) in BE mode */
+ ibl.bootModes[1].u.nandBoot.interface = ibl_PMEM_IF_CHIPSEL_2;
+
+ ibl.bootModes[1].u.nandBoot.blob[0][0].startAddress = 0x80000000; /* Image 0 load start address in LE mode */
+ ibl.bootModes[1].u.nandBoot.blob[0][0].sizeBytes = 0xFFC000; /* Image 0 size in LE mode */
+ ibl.bootModes[1].u.nandBoot.blob[0][0].branchAddress = 0x80000000; /* Image 0 branch address after loading in LE mode */
+ ibl.bootModes[1].u.nandBoot.blob[0][1].startAddress = 0x80000000; /* Image 1 load start address in LE mode */
+ ibl.bootModes[1].u.nandBoot.blob[0][1].sizeBytes = 0xFFC000; /* Image 1 size in LE mode */
+ ibl.bootModes[1].u.nandBoot.blob[0][1].branchAddress = 0x80000000; /* Image 1 branch address after loading in LE mode */
+ ibl.bootModes[1].u.nandBoot.blob[1][0].startAddress = 0x80000000; /* Image 0 load start address in BE mode */
+ ibl.bootModes[1].u.nandBoot.blob[1][0].sizeBytes = 0xFFC000; /* Image 0 size in BE mode */
+ ibl.bootModes[1].u.nandBoot.blob[1][0].branchAddress = 0x80000000; /* Image 0 branch address after loading in BE mode */
+ ibl.bootModes[1].u.nandBoot.blob[1][1].startAddress = 0x80000000; /* Image 1 load start address in BE mode */
+ ibl.bootModes[1].u.nandBoot.blob[1][1].sizeBytes = 0xFFC000; /* Image 1 size in BE mode */
+ ibl.bootModes[1].u.nandBoot.blob[1][1].branchAddress = 0x80000000; /* Image 1 branch address after loading in BE mode */
+
+
+ ibl.bootModes[1].u.nandBoot.nandInfo.busWidthBits = 8;
+ ibl.bootModes[1].u.nandBoot.nandInfo.pageSizeBytes = 512;
+ ibl.bootModes[1].u.nandBoot.nandInfo.pageEccBytes = 16;
+ ibl.bootModes[1].u.nandBoot.nandInfo.pagesPerBlock = 32;
+ ibl.bootModes[1].u.nandBoot.nandInfo.totalBlocks = 4096;
+
+ ibl.bootModes[1].u.nandBoot.nandInfo.addressBytes = 4;
+ ibl.bootModes[1].u.nandBoot.nandInfo.lsbFirst = TRUE;
+ ibl.bootModes[1].u.nandBoot.nandInfo.blockOffset = 14;
+ ibl.bootModes[1].u.nandBoot.nandInfo.pageOffset = 9;
+ ibl.bootModes[1].u.nandBoot.nandInfo.columnOffset = 0;
+
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[0] = 0;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[1] = 1;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[2] = 2;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[3] = 3;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[4] = 4;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[5] = 6;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[6] = 7;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[7] = 13;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[8] = 14;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[9] = 15;
+
+ ibl.bootModes[1].u.nandBoot.nandInfo.badBlkMarkIdx[0]= 5;
+ ibl.bootModes[1].u.nandBoot.nandInfo.badBlkMarkIdx[1]= 0xff;
+
+ ibl.bootModes[1].u.nandBoot.nandInfo.resetCommand = 0xff;
+ ibl.bootModes[1].u.nandBoot.nandInfo.readCommandPre = 0;
+ ibl.bootModes[1].u.nandBoot.nandInfo.readCommandPost = 0;
+ ibl.bootModes[1].u.nandBoot.nandInfo.postCommand = FALSE;
+
+ ibl.bootModes[2].bootMode = ibl_BOOT_MODE_TFTP;
+ ibl.bootModes[2].priority = ibl_HIGHEST_PRIORITY+1;
+ ibl.bootModes[2].port = ibl_PORT_SWITCH_ALL;
+
+ ibl.bootModes[2].u.ethBoot.doBootp = FALSE;
+ ibl.bootModes[2].u.ethBoot.useBootpServerIp = TRUE;
+ ibl.bootModes[2].u.ethBoot.useBootpFileName = TRUE;
+ ibl.bootModes[2].u.ethBoot.bootFormat = ibl_BOOT_FORMAT_BBLOB;
+
+
+ SETIP(ibl.bootModes[2].u.ethBoot.ethInfo.ipAddr, 192,168,2,100);
+ SETIP(ibl.bootModes[2].u.ethBoot.ethInfo.serverIp, 192,168,2,101);
+ SETIP(ibl.bootModes[2].u.ethBoot.ethInfo.gatewayIp, 192,168,2,1);
+ SETIP(ibl.bootModes[2].u.ethBoot.ethInfo.netmask, 255,255,255,0);
+
+ /* Use the e-fuse value */
+ ibl.bootModes[2].u.ethBoot.ethInfo.hwAddress[0] = 0;
+ ibl.bootModes[2].u.ethBoot.ethInfo.hwAddress[1] = 0;
+ ibl.bootModes[2].u.ethBoot.ethInfo.hwAddress[2] = 0;
+ ibl.bootModes[2].u.ethBoot.ethInfo.hwAddress[3] = 0;
+ ibl.bootModes[2].u.ethBoot.ethInfo.hwAddress[4] = 0;
+ ibl.bootModes[2].u.ethBoot.ethInfo.hwAddress[5] = 0;
+
+
+ ibl.bootModes[2].u.ethBoot.ethInfo.fileName[0] = 'a';
+ ibl.bootModes[2].u.ethBoot.ethInfo.fileName[1] = 'p';
+ ibl.bootModes[2].u.ethBoot.ethInfo.fileName[2] = 'p';
+ ibl.bootModes[2].u.ethBoot.ethInfo.fileName[3] = '.';
+ ibl.bootModes[2].u.ethBoot.ethInfo.fileName[4] = 'o';
+ ibl.bootModes[2].u.ethBoot.ethInfo.fileName[5] = 'u';
+ ibl.bootModes[2].u.ethBoot.ethInfo.fileName[6] = 't';
+ ibl.bootModes[2].u.ethBoot.ethInfo.fileName[7] = '\0';
+ ibl.bootModes[2].u.ethBoot.ethInfo.fileName[8] = '\0';
+ ibl.bootModes[2].u.ethBoot.ethInfo.fileName[9] = '\0';
+ ibl.bootModes[2].u.ethBoot.ethInfo.fileName[10] = '\0';
+ ibl.bootModes[2].u.ethBoot.ethInfo.fileName[11] = '\0';
+ ibl.bootModes[2].u.ethBoot.ethInfo.fileName[12] = '\0';
+ ibl.bootModes[2].u.ethBoot.ethInfo.fileName[13] = '\0';
+ ibl.bootModes[2].u.ethBoot.ethInfo.fileName[14] = '\0';
+
+ ibl.bootModes[2].u.ethBoot.blob.startAddress = 0x80000000; /* Load start address */
+ ibl.bootModes[2].u.ethBoot.blob.sizeBytes = 0x20000000;
+ ibl.bootModes[2].u.ethBoot.blob.branchAddress = 0x80000000; /* Branch address after loading */
+
+ ibl.chkSum = 0;
+}
+
+menuitem "EVM c6670 IBL";
+
+hotmenu setConfig_c6670_main()
+{
+ ibl.iblMagic = ibl_MAGIC_VALUE;
+ ibl.iblEvmType = ibl_EVM_C6670L;
+
+ /* Main PLL: 122.88 MHz reference, 983 MHz output */
+ ibl.pllConfig[ibl_MAIN_PLL].doEnable = 1;
+ ibl.pllConfig[ibl_MAIN_PLL].prediv = 1;
+ ibl.pllConfig[ibl_MAIN_PLL].mult = 16;
+ ibl.pllConfig[ibl_MAIN_PLL].postdiv = 2;
+ ibl.pllConfig[ibl_MAIN_PLL].pllOutFreqMhz = 983;
+
+ /* DDR PLL */
+ ibl.pllConfig[ibl_DDR_PLL].doEnable = 1;
+ ibl.pllConfig[ibl_DDR_PLL].prediv = 1;
+ ibl.pllConfig[ibl_DDR_PLL].mult = 20;
+ ibl.pllConfig[ibl_DDR_PLL].postdiv = 2;
+ ibl.pllConfig[ibl_DDR_PLL].pllOutFreqMhz = 1333;
+
+ /* Net PLL: 122.88 MHz reference, 1044 MHz output (followed by a built in divide by 3 to give 348 MHz to PA) */
+ ibl.pllConfig[ibl_NET_PLL].doEnable = 1;
+ ibl.pllConfig[ibl_NET_PLL].prediv = 1;
+ ibl.pllConfig[ibl_NET_PLL].mult = 17;
+ ibl.pllConfig[ibl_NET_PLL].postdiv = 2;
+ ibl.pllConfig[ibl_NET_PLL].pllOutFreqMhz = 1044;
+
+
+ ibl.ddrConfig.configDdr = 1;
+ ibl.ddrConfig.uEmif.emif4p0.registerMask = ibl_EMIF4_ENABLE_sdRamConfig | ibl_EMIF4_ENABLE_sdRamRefreshCtl | ibl_EMIF4_ENABLE_sdRamTiming1 | ibl_EMIF4_ENABLE_sdRamTiming2 | ibl_EMIF4_ENABLE_sdRamTiming3 | ibl_EMIF4_ENABLE_ddrPhyCtl1;
+
+ ibl.ddrConfig.uEmif.emif4p0.sdRamConfig = 0x63C452B2;
+ ibl.ddrConfig.uEmif.emif4p0.sdRamConfig2 = 0;
+ ibl.ddrConfig.uEmif.emif4p0.sdRamRefreshCtl = 0x000030D4;
+ ibl.ddrConfig.uEmif.emif4p0.sdRamTiming1 = 0x0AAAE51B;
+ ibl.ddrConfig.uEmif.emif4p0.sdRamTiming2 = 0x2A2F7FDA;
+ ibl.ddrConfig.uEmif.emif4p0.sdRamTiming3 = 0x057F82B8;
+ ibl.ddrConfig.uEmif.emif4p0.lpDdrNvmTiming = 0;
+ ibl.ddrConfig.uEmif.emif4p0.powerManageCtl = 0;
+ ibl.ddrConfig.uEmif.emif4p0.iODFTTestLogic = 0;
+ ibl.ddrConfig.uEmif.emif4p0.performCountCfg = 0;
+ ibl.ddrConfig.uEmif.emif4p0.performCountMstRegSel = 0;
+ ibl.ddrConfig.uEmif.emif4p0.readIdleCtl = 0;
+ ibl.ddrConfig.uEmif.emif4p0.sysVbusmIntEnSet = 0;
+ ibl.ddrConfig.uEmif.emif4p0.sdRamOutImpdedCalCfg = 0;
+ ibl.ddrConfig.uEmif.emif4p0.tempAlterCfg = 0;
+ ibl.ddrConfig.uEmif.emif4p0.ddrPhyCtl1 = 0x0010010d;
+ ibl.ddrConfig.uEmif.emif4p0.ddrPhyCtl2 = 0;
+ ibl.ddrConfig.uEmif.emif4p0.priClassSvceMap = 0;
+ ibl.ddrConfig.uEmif.emif4p0.mstId2ClsSvce1Map = 0;
+ ibl.ddrConfig.uEmif.emif4p0.mstId2ClsSvce2Map = 0;
+ ibl.ddrConfig.uEmif.emif4p0.eccCtl = 0;
+ ibl.ddrConfig.uEmif.emif4p0.eccRange1 = 0;
+ ibl.ddrConfig.uEmif.emif4p0.eccRange2 = 0;
+ ibl.ddrConfig.uEmif.emif4p0.rdWrtExcThresh = 0;
+
+
+ ibl.sgmiiConfig[0].configure = 1;
+ ibl.sgmiiConfig[0].adviseAbility = 1;
+ ibl.sgmiiConfig[0].control = 1;
+ ibl.sgmiiConfig[0].txConfig = 0x108a1;
+ ibl.sgmiiConfig[0].rxConfig = 0x700621;
+ ibl.sgmiiConfig[0].auxConfig = 0x41;
+
+ ibl.sgmiiConfig[1].configure = 1;
+ ibl.sgmiiConfig[1].adviseAbility = 1;
+ ibl.sgmiiConfig[1].control = 1;
+ ibl.sgmiiConfig[1].txConfig = 0x108a1;
+ ibl.sgmiiConfig[1].rxConfig = 0x700621;
+ ibl.sgmiiConfig[1].auxConfig = 0x51;
+
+ ibl.mdioConfig.nMdioOps = 0;
+
+ ibl.spiConfig.addrWidth = 24;
+ ibl.spiConfig.nPins = 5;
+ ibl.spiConfig.mode = 1;
+ ibl.spiConfig.csel = 2;
+ ibl.spiConfig.c2tdelay = 1;
+ ibl.spiConfig.busFreqMHz = 20;
+
+ ibl.emifConfig[0].csSpace = 2;
+ ibl.emifConfig[0].busWidth = 8;
+ ibl.emifConfig[0].waitEnable = 0;
+
+ ibl.emifConfig[1].csSpace = 0;
+ ibl.emifConfig[1].busWidth = 0;
+ ibl.emifConfig[1].waitEnable = 0;
+
+ ibl.bootModes[0].bootMode = ibl_BOOT_MODE_NOR;
+ ibl.bootModes[0].priority = ibl_HIGHEST_PRIORITY;
+ ibl.bootModes[0].port = 0;
+
+ ibl.bootModes[0].u.norBoot.bootFormat = ibl_BOOT_FORMAT_ELF;
+ ibl.bootModes[0].u.norBoot.bootAddress[0][0] = 0; /* Image 0 NOR offset byte address in LE mode */
+ ibl.bootModes[0].u.norBoot.bootAddress[0][1] = 0xA00000; /* Image 1 NOR offset byte address in LE mode */
+ ibl.bootModes[0].u.norBoot.bootAddress[1][0] = 0; /* Image 0 NOR offset byte address in BE mode */
+ ibl.bootModes[0].u.norBoot.bootAddress[1][1] = 0xA00000; /* Image 1 NOR offset byte address in BE mode */
+ ibl.bootModes[0].u.norBoot.interface = ibl_PMEM_IF_SPI;
+ ibl.bootModes[0].u.norBoot.blob[0][0].startAddress = 0x80000000; /* Image 0 load start address in LE mode */
+ ibl.bootModes[0].u.norBoot.blob[0][0].sizeBytes = 0xA00000; /* Image 0 size (10 MB) in LE mode */
+ ibl.bootModes[0].u.norBoot.blob[0][0].branchAddress = 0x80000000; /* Image 0 branch address after loading in LE mode */
+ ibl.bootModes[0].u.norBoot.blob[0][1].startAddress = 0x80000000; /* Image 1 load start address in LE mode */
+ ibl.bootModes[0].u.norBoot.blob[0][1].sizeBytes = 0xA00000; /* Image 1 size (10 MB) in LE mode */
+ ibl.bootModes[0].u.norBoot.blob[0][1].branchAddress = 0x80000000; /* Image 1 branch address after loading in LE mode */
+ ibl.bootModes[0].u.norBoot.blob[1][0].startAddress = 0x80000000; /* Image 0 load start address in BE mode */
+ ibl.bootModes[0].u.norBoot.blob[1][0].sizeBytes = 0xA00000; /* Image 0 size (10 MB) in BE mode */
+ ibl.bootModes[0].u.norBoot.blob[1][0].branchAddress = 0x80000000; /* Image 0 branch address after loading in BE mode */
+ ibl.bootModes[0].u.norBoot.blob[1][1].startAddress = 0x80000000; /* Image 1 load start address in BE mode */
+ ibl.bootModes[0].u.norBoot.blob[1][1].sizeBytes = 0xA00000; /* Image 1 size (10 MB) in BE mode */
+ ibl.bootModes[0].u.norBoot.blob[1][1].branchAddress = 0x80000000; /* Image 1 branch address after loading in BE mode */
+
+ ibl.bootModes[1].bootMode = ibl_BOOT_MODE_NAND;
+ ibl.bootModes[1].priority = ibl_HIGHEST_PRIORITY;
+ ibl.bootModes[1].port = 0;
+
+ ibl.bootModes[1].u.nandBoot.bootFormat = ibl_BOOT_FORMAT_BBLOB;
+ ibl.bootModes[1].u.nandBoot.bootAddress[0][0] = 0x4000; /* Image 0 NAND offset address (block 1) in LE mode */
+ ibl.bootModes[1].u.nandBoot.bootAddress[0][1] = 0x2000000; /* Image 1 NAND offset address (block 2048) in LE mode */
+ ibl.bootModes[1].u.nandBoot.bootAddress[1][0] = 0x4000; /* Image 0 NAND offset address (block 1) in BE mode */
+ ibl.bootModes[1].u.nandBoot.bootAddress[1][1] = 0x2000000; /* Image 1 NAND offset address (block 2048) in BE mode */
+ ibl.bootModes[1].u.nandBoot.interface = ibl_PMEM_IF_GPIO;
+
+ ibl.bootModes[1].u.nandBoot.blob[0][0].startAddress = 0x80000000; /* Image 0 load start address in LE mode */
+ ibl.bootModes[1].u.nandBoot.blob[0][0].sizeBytes = 0xFFC000; /* Image 0 size in LE mode */
+ ibl.bootModes[1].u.nandBoot.blob[0][0].branchAddress = 0x80000000; /* Image 0 branch address after loading in LE mode */
+ ibl.bootModes[1].u.nandBoot.blob[0][1].startAddress = 0x80000000; /* Image 1 load start address in LE mode */
+ ibl.bootModes[1].u.nandBoot.blob[0][1].sizeBytes = 0xFFC000; /* Image 1 size in LE mode */
+ ibl.bootModes[1].u.nandBoot.blob[0][1].branchAddress = 0x80000000; /* Image 1 branch address after loading in LE mode */
+ ibl.bootModes[1].u.nandBoot.blob[1][0].startAddress = 0x80000000; /* Image 0 load start address in BE mode */
+ ibl.bootModes[1].u.nandBoot.blob[1][0].sizeBytes = 0xFFC000; /* Image 0 size mode */
+ ibl.bootModes[1].u.nandBoot.blob[1][0].branchAddress = 0x80000000; /* Image 0 branch address after loading in BE mode */
+ ibl.bootModes[1].u.nandBoot.blob[1][1].startAddress = 0x80000000; /* Image 1 load start address in BE mode */
+ ibl.bootModes[1].u.nandBoot.blob[1][1].sizeBytes = 0xFFC000; /* Image 1 size in BE mode */
+ ibl.bootModes[1].u.nandBoot.blob[1][1].branchAddress = 0x80000000; /* Image 1 branch address after loading in BE mode */
+
+
+ ibl.bootModes[1].u.nandBoot.nandInfo.busWidthBits = 8;
+ ibl.bootModes[1].u.nandBoot.nandInfo.pageSizeBytes = 512;
+ ibl.bootModes[1].u.nandBoot.nandInfo.pageEccBytes = 16;
+ ibl.bootModes[1].u.nandBoot.nandInfo.pagesPerBlock = 32;
+ ibl.bootModes[1].u.nandBoot.nandInfo.totalBlocks = 4096;
+
+ ibl.bootModes[1].u.nandBoot.nandInfo.addressBytes = 4;
+ ibl.bootModes[1].u.nandBoot.nandInfo.lsbFirst = TRUE;
+ ibl.bootModes[1].u.nandBoot.nandInfo.blockOffset = 14;
+ ibl.bootModes[1].u.nandBoot.nandInfo.pageOffset = 9;
+ ibl.bootModes[1].u.nandBoot.nandInfo.columnOffset = 0;
+
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[0] = 0;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[1] = 1;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[2] = 2;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[3] = 3;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[4] = 4;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[5] = 6;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[6] = 7;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[7] = 13;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[8] = 14;
+ ibl.bootModes[1].u.nandBoot.nandInfo.eccBytesIdx[9] = 15;
+
+ ibl.bootModes[1].u.nandBoot.nandInfo.badBlkMarkIdx[0]= 5;
+ ibl.bootModes[1].u.nandBoot.nandInfo.badBlkMarkIdx[1]= 0xff;
+
+ ibl.bootModes[1].u.nandBoot.nandInfo.resetCommand = 0xff;
+ ibl.bootModes[1].u.nandBoot.nandInfo.readCommandPre = 0;
+ ibl.bootModes[1].u.nandBoot.nandInfo.readCommandPost = 0;
+ ibl.bootModes[1].u.nandBoot.nandInfo.postCommand = FALSE;
+
+ ibl.bootModes[2].bootMode = ibl_BOOT_MODE_TFTP;
+ ibl.bootModes[2].priority = ibl_HIGHEST_PRIORITY+1;
+ ibl.bootModes[2].port = ibl_PORT_SWITCH_ALL;
+
+ ibl.bootModes[2].u.ethBoot.doBootp = FALSE;
+ ibl.bootModes[2].u.ethBoot.useBootpServerIp = TRUE;
+ ibl.bootModes[2].u.ethBoot.useBootpFileName = TRUE;
+ ibl.bootModes[2].u.ethBoot.bootFormat = ibl_BOOT_FORMAT_BBLOB;
+
+
+ SETIP(ibl.bootModes[2].u.ethBoot.ethInfo.ipAddr, 192,168,2,100);
+ SETIP(ibl.bootModes[2].u.ethBoot.ethInfo.serverIp, 192,168,2,101);
+ SETIP(ibl.bootModes[2].u.ethBoot.ethInfo.gatewayIp, 192,168,2,1);
+ SETIP(ibl.bootModes[2].u.ethBoot.ethInfo.netmask, 255,255,255,0);
+
+ /* Use the e-fuse value */
+ ibl.bootModes[2].u.ethBoot.ethInfo.hwAddress[0] = 0;
+ ibl.bootModes[2].u.ethBoot.ethInfo.hwAddress[1] = 0;
+ ibl.bootModes[2].u.ethBoot.ethInfo.hwAddress[2] = 0;
+ ibl.bootModes[2].u.ethBoot.ethInfo.hwAddress[3] = 0;
+ ibl.bootModes[2].u.ethBoot.ethInfo.hwAddress[4] = 0;
+ ibl.bootModes[2].u.ethBoot.ethInfo.hwAddress[5] = 0;
+
+
+ ibl.bootModes[2].u.ethBoot.ethInfo.fileName[0] = 'a';
+ ibl.bootModes[2].u.ethBoot.ethInfo.fileName[1] = 'p';
+ ibl.bootModes[2].u.ethBoot.ethInfo.fileName[2] = 'p';
+ ibl.bootModes[2].u.ethBoot.ethInfo.fileName[3] = '.';
+ ibl.bootModes[2].u.ethBoot.ethInfo.fileName[4] = 'o';
+ ibl.bootModes[2].u.ethBoot.ethInfo.fileName[5] = 'u';
+ ibl.bootModes[2].u.ethBoot.ethInfo.fileName[6] = 't';
+ ibl.bootModes[2].u.ethBoot.ethInfo.fileName[7] = '\0';
+ ibl.bootModes[2].u.ethBoot.ethInfo.fileName[8] = '\0';
+ ibl.bootModes[2].u.ethBoot.ethInfo.fileName[9] = '\0';
+ ibl.bootModes[2].u.ethBoot.ethInfo.fileName[10] = '\0';
+ ibl.bootModes[2].u.ethBoot.ethInfo.fileName[11] = '\0';
+ ibl.bootModes[2].u.ethBoot.ethInfo.fileName[12] = '\0';
+ ibl.bootModes[2].u.ethBoot.ethInfo.fileName[13] = '\0';
+ ibl.bootModes[2].u.ethBoot.ethInfo.fileName[14] = '\0';
+
+ ibl.bootModes[2].u.ethBoot.blob.startAddress = 0x80000000; /* Load start address */
+ ibl.bootModes[2].u.ethBoot.blob.sizeBytes = 0x20000000;
+ ibl.bootModes[2].u.ethBoot.blob.branchAddress = 0x80000000; /* Branch address after loading */
+
+ ibl.chkSum = 0;
+}
+