diff --git a/src/util/spiWrite/spiWrite.c b/src/util/spiWrite/spiWrite.c
+++ /dev/null
@@ -1,210 +0,0 @@
-/*
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- *
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- *
- * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the
- * distribution.
- *
- * Neither the name of Texas Instruments Incorporated nor the names of
- * its contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
-*/
-
-/**
- * @file spiWrite.c
- *
- * @brief
- * Write to an SPI eeprom
- */
-
-#include "types.h"
-#include "spi_api.h"
-#include "target.h"
-#include "pllapi.h"
-#include <stdio.h>
-#include <string.h>
-
-#pragma DATA_SECTION(txData, ".tx_data")
-#pragma DATA_SECTION(rxData, ".rx_data")
-
-#define MAX_DATA_SIZE 0x40000 /* 256 kb */
-uint32 txData[MAX_DATA_SIZE >> 2];
-uint32 rxData[MAX_DATA_SIZE >> 2];
-
-#define MAX_BLOCK_SIZE 2048
-uint8 scratchBlock[MAX_BLOCK_SIZE];
-
-unsigned int nbytes = MAX_DATA_SIZE;
-unsigned int startAddress = 0;
-
-/* Run time configuration */
-unsigned int deviceFreqMhz = 1000;
-unsigned int prediv = 1;
-unsigned int mult = 20;
-unsigned int postdiv = 2;
-
-unsigned int spiBlockSize = 256;
-unsigned int spiSectorSize = 4096; /* Erase size */
-
-spiConfig_t cfg = {
-
- 0, /* port */
- SPI_MODE, /* mode */
- SPI_ADDR_WIDTH, /* address width */
- SPI_NPIN, /* number of pins */
- SPI_CSEL, /* csel */
- SPI_CLKDIV, /* clock divider */
- SPI_C2TDEL /* ct2delay */
-
-};
-
-
-
-int main (void)
-{
- int result;
- int firstSector;
- int lastSector;
- int nblocks;
- int i, j, k;
-
- unsigned int addr;
-
- /* This writer requires that the start address be block aligned */
- if ((startAddress % spiBlockSize) != 0) {
- printf ("spiWriter requires that the start address be block aligned, exiting\n");
- return (-1);
- }
-
- /* Check that the block size is within range */
- if (spiBlockSize > MAX_BLOCK_SIZE) {
- printf ("The block size selected (%d) is greater then the max size of %d.\n", spiBlockSize, MAX_BLOCK_SIZE);
- printf ("Increase the value of MAX_BLOCK_SIZE and recompile the program\n");
- return (-1);
- }
-
- /* Power up the SPI */
- #ifdef TARGET_PWR_SPI
- devicePowerPeriph (TARGET_PWR_SPI);
- #endif
-
-
- /* Program the main system PLL */
- hwPllSetPll (0, /* Main PLL */
- prediv, /* Pre-divider */
- mult, /* Multiplier */
- postdiv); /* Post-divider */
-
-
- result = hwSpiConfig (&cfg);
- if (result != 0) {
- printf ("hwSpiConfig returned error %d\n", result);
- return (-1);
- }
-
- /* Erase all sectors that will be used */
- firstSector = startAddress / spiSectorSize;
- lastSector = (startAddress + nbytes + spiSectorSize - 1) / spiSectorSize;
-
- printf ("Erasing sector: ");
- for (i = firstSector; i <= lastSector; i++) {
- printf ("%d ", i);
- eraseSector (&cfg, i * spiSectorSize);
- }
-
- printf ("done\n");
-
-
- /* Program all the data */
- nblocks = (nbytes + spiBlockSize - 1) / spiBlockSize;
-
- printf ("Writing blocks ");
- for (i = 0, addr = startAddress; i < nblocks; i++, addr += spiBlockSize) {
-
- result = writeBlock (&cfg, addr, &txData[(i * spiBlockSize) >> 2], spiBlockSize, scratchBlock);
- if (result != 0) {
- printf ("\nwriteBlock returned error code %d, exiting\n", result);
- return (-1);
- }
-
- printf (".");
- }
-
- printf ("\n");
-
-
- /* Read the data as bytes. Translate it to words */
- printf ("Reading blocks ");
- for (i = j = 0, addr = startAddress; i < nblocks; i++, addr += spiBlockSize) {
-
- result = readBlock (&cfg, addr, scratchBlock, spiBlockSize);
-
- if (result != 0) {
- printf ("\nreadBlock returned error code %d, exiting\n", result);
- return (-1);
- }
-
- for (k = 0; k < spiBlockSize; k += 4)
- rxData[j++] = (scratchBlock[k+0] << 24) | (scratchBlock[k+1] << 16) | (scratchBlock[k+2] << 8) | scratchBlock[k+3];
-
- printf (".");
- }
-
- printf ("\n");
-
- /* Compare the results */
- printf ("Checking the read back\n");
-
- for (i = j = 0; i < nbytes >> 2; i++) {
-
- if (txData[i] != rxData[i]) {
-
- j += 1;
- printf ("failure at word %d: Expected 0x%04x, found 0x%04x\n", i, txData[i], rxData[i]);
-
- }
-
- if (j >= 5) {
- printf ("Too many errors, quitting\n");
- break;
- }
- }
-
- if (j == 0)
- printf ("Read back verified\n");
-
-
- return (0);
-
-}
-
-
-
-
-
-
-
-