c66x: DDR3 PLL init update

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

c66x: PLL init code update based on latest review

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

Minor Update to i2c param cmd file

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

c66x: Updated PLL init code

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

Don't copy .dat files to Release folder

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

6670: Don't init DDR PLL twice

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

Adding back support for updating i2c config params

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

Add Doc for Single Binary Support

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

Increase delays in DDR3 init

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

c66x: Updated DDR configuration

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

Revert "c66x: Updated DDR configuration"

This reverts commit e1253610dc118b365b2475d85008519458eafbec.

This DDR config change is causing boot issues on many (but not all) 6670 boards.
There is also variablity between rebuilds of the same kernel source (ie small address variations)

Signed-off-by: Bill Mills <wmills@ti.com>

GPIO: GPIO Read function returns 8 bits

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

Update README.txt with correct release info

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

Update device config for DHCP boot

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

c66x: Updated DDR configuration

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

setupenvLnx.sh: search more places for cgt

Search more dirs for an installed CGT

Signed-off-by: Bill Mills <wmills@ti.com>

Merge commit 'origin/tmp-wam-top-level-build'

GPIO NAND: Fix for Big Endian Boot

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

GPIO NAND: Add function prototype for Read

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

c66x: Update Section sizes

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

GPIO: Read Function should return 32 bits

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

Build: update setupenvLnx.sh to do error checking

Do a basic sanity test of C6X_BASE_DIR

Signed-off-by: Bill Mills <wmills@ti.com>

.gitignore: update to ignore all make created files

Signed-off-by: Bill Mills <wmills@ti.com>

setupenvLnx.sh: Don't hard code TI GT specific paths

We should not be hard coding TI GT specific paths into the source files.
We should not make the user edit a source file to do thier build.
This change allows the user to predefine C6X_BASE_DIR.
If not defined it will look in standard places for CCS as is done for Windows.

Signed-off-by: Bill Mills <wmills@ti.com>

clean out old unused files

These files have not been updated when the build procedure changed
but there were still present causing confusion.

Signed-off-by: Bill Mills <wmills@ti.com>

iblConfig: fix undefined return code

When all works fine, main was hitting } w/o a return.
This left the process return code undefined.
It may have worked on some machines but was not correct.

Signed-off-by: Bill Mills <wmills@ti.com>

Minor Cleanup for Single Binary Support

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

Updates to the documentation due to single binary updates

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

Merge commit 'origin/master' into single-bi

Updating the EVM flag

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

Makestg2 update for single binary support

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

Single Binary Support Enhancement

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

Single Binary Build Update

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

Adding EVM flag to build infrastructure

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

Minor update to build infra to add support for single binary

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

i2c Params are no longer built

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

IBL Single Binary Support: Updating Directory Names

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

Updated Release version

Adding PCIe boot support for C6670 SDOCM00083134

Single Binary Support: Initial Commit

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

IBL: Bumped up version of IBL to 1.0.0.9

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

Modification to IBL main function

Modification was required to add c64x multi boot support

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

c64x: Updates to gel file for multi boot support

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

6472: Remove dual endian support

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

6455: Remove dual endian support

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

c64x: Add Multi Boot Support

This commit adds multi boot support for
the c64x+ based low cost EVMs.

TFTP and NAND boot were tested on the
c6472, c6474 and c6457 low cost EVMs

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

UART: Start adding UART code

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

6474l: Add infrastructure to build 6474l

This commit adds infrastructure to build the 6474
low cost EVM as a separate target

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

C6457: Update Branch/Start Address for NAND boot

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

C64x: Updates to gel file for NAND boot

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

util: host program to generate ecc test patterns

Signed-off-by: Bill Mills <wmills@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

GPIO NAND: Complete Support for 2k page size NAND

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

Cleanup unused MACROS

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

GPIO-NAND: Add check for 2K page size NAND

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

GPIO NAND: ADD Support for c64x devices

This commit adds support for the C64x+ SOCs in the
GPIO NAND Driver

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

c64x+ : modify Makefile to build NAND GPIO driver

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

c64x+ : Minor code cleanup

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

C64x+: Additions to gel file

Making additions to the gel file for C64x+ based SOCs/EVMs
which have a NAND

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

GPIO-NAND: Add NAND specific definitions

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

GPIO NAND: Move definitions to header file

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

Updating release version to 1.0.0.8

Changed the default parameters for BLOB image format to match Linux Kernel image

Updated release version
modified make clean for i2cConfig

Gel file updates to increase blob size

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

Merge branch 'master' of git@gtgit01.gt.design.ti.com:git/teams/mmi/ibl

Fix for IRs 81908, 81906, 81876, 81800

updated Release version

Removed file src/util/.gitignore

Fix for slow I2C boot on C6678/C6670 EVM's
FIx for booting multiple images

Renamed C661x to C66x

Changes to make IBL NAND boot work on C6670 Beta-2 EVM
Verified NAND boot on C6678 EVM & C6670 Beta-2 EVM

Documentation updated for IR's SDOCM00080092 & SDOCM00081107

Fixes to make the build work for C66x and C64x devices
Documentation changes

Merge branch 'master' of git@gtgit01.gt.design.ti.com:git/teams/mmi/ibl

Documentation updates

Top level Makefile Change

We will have to explicitly pass in options from the command line
to EXCLUDES instead of hard coding

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

Removing EXCLUDE option for GPIO NAND driver

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

GPIO NAND Driver Fixes

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

Updates to IBL main function for GPIO NAND driver

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

GPIO NAND: Updates to add files for driver

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

GPIO NAND driver updates

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

NAND: Adding infrastructure to build GPIO NAND driver

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

667x: Adding GPIO definitions

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

6670 LC: NAND specific definitions

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

updated documentation

Changes for C6670 support from Hao

Makefile changes to exclude features in C64X devices to save eeprom space
Fix for C6472 EVM to work with GIGE switch

Removed spiConfig writer from utils

Updated documents and removed the utils source

Makefile cleanup

Merge branch 'nysh_multi_boot'

Conflicts:
doc/release_info.txt
src/hw/ddrs/emif4/emif4.c
src/ibl.h
src/make/setupenv.bat
src/make/setupenvMsys.sh
src/util/i2cConfig/i2cConfig.gel

Manual overrides
release.sh
src/driver/nand.c
src/make/Makefile
src/make/makestg1
src/make/makestg2
src/util/i2cConfig/i2cparam.c
src/util/i2cConfig/i2cConfig.gel

Modified release_info.txt

DDR configuration changes for C6670

Changes to build IBL from MINGW-MSYS Bash shell

Added support for NOR/EMAC boot for C6670

update the i2cconfig.gel
[Bill reworked Hao's commit as 3byte_ecc.c now does not change in this commit.]

Fixed TFTP bug for multi-boot

Support new feature for multiple device/image boot
[Bill reworked Hao's commit to remove forbidden changes to 3byte_ecc.c]

Changed the DDR rate to 1333 and fixed the HUA boot from NOR problem

Added IBL support for C6670