processor-firmware/ti-amx3-cm3-pm-firmware.git
2014-03-10 ankurCM3: AM43XX: Add Tamper swakeup settings master
2014-02-13 Russ DillCM3: Bump firmware release version to 0x186
2014-02-13 Russ DillCM3: I2C: Fix duty cycle calculations
2014-02-13 Russ DillCM3: I2C: Fix PER CLKOUTM2 frequency calculation
2014-02-13 Russ DillCM3: AM437x: Add XTAL calculation code and support...
2014-02-01 Russ DillCM3: Update the pre-build binary to support am43xx... v05.00.00.02
2014-02-01 Dave GerlachCM3: ddr: Only clear DDR reset line for AM335x
2014-02-01 Dave GerlachCM3: AM43XX Add support for IO Isolation
2014-01-27 Tero Kristocm3: bug-fix for cm3 version generator script
2014-01-11 Felipe Balbicm3: License.txt: break lines at 80-characters
2014-01-11 Felipe Balbicm3: utf8-ify License.txt agreement
2014-01-11 Felipe Balbicm3: improve Makefile a little more
2014-01-11 Felipe Balbicm3: generate version number from Makefile
2014-01-11 Felipe Balbicm3: add a script to generate version number
2014-01-11 Felipe Balbicm3: add tags and *.diff to .gitignore
2014-01-11 Felipe Balbicm3: pretty print build sequence
2014-01-11 Felipe Balbicm3: Makefile doesn't need execute permission
2013-12-11 Russ DillCM3: Version 0x184 - Additional am43xx support ti2013.12.00 v05.00.00.01
2013-12-11 Dave GerlachCM3: AM43XX: Add missing hwmods
2013-12-11 Dave GerlachCM3: AM43XX: Add state data to shut off upper OCMC...
2013-12-11 Dave GerlachCM3: AM43XX: powerdomain: Add ability to shut off upper...
2013-12-11 Dave GerlachCM3: AM43XX: Allow CORE_SRAM_LDO to be put in retention
2013-12-11 Dave GerlachCM3: AM43XX: Update ds save and restore functions
2013-12-11 Dave GerlachCM3: AM43XX: Add DDR ioconfig for LPDDR2
2013-12-11 Dave GerlachCM3: AM43XX: Add PLL registers and bits
2013-12-11 Dave GerlachCM3: AM43XX: Cleanup AM43XX clockdomains
2013-12-11 Dave GerlachCM3: Add timeouts for hwmod enable and disable
2013-12-11 Hebbar, GururajaCM3: Fix A8 Parameter Mask
2013-12-09 Russ DillCM3: Bump version and update the pre-built binary for...
2013-12-05 Russ DillCM3: I2C: Move wake_handler to before the re-enabling...
2013-12-05 Russ DillCM3: I2C: Restore SCLH register properly
2013-12-05 Russ DillAdd debug support
2013-11-25 Russ DillCM3: Leave I2C IP block the way we found it
2013-11-25 Russ DillCM3: Add hwmod_is_enabled check
2013-08-23 Russ DillCM3: Update the pre-built binary with V2 command support v05.00.00.00
2013-08-23 Russ DillAM335X: CM3: Add CPU idle handlers.
2013-08-23 Russ DillCM3: Remove redundant rtc_timeout_val range check.
2013-08-23 Russ DillCM3: Only re-enable master oscillator if it was disabled.
2013-08-23 Russ DillCM3: Reset IPC param registers at firmware boot
2013-08-23 Russ DillCM3: Move memory config globals to msg.c
2013-08-23 Russ DillCM3: Remove unnecessary include statements.
2013-08-23 Russ DillCM3: Remove now unused bits from prm335x.h
2013-08-23 Russ DillCM3: Add functionality to powerdomain to read current...
2013-08-23 Russ DillCM3: Move LDO register bits from prm335x.h to ldo.c
2013-08-23 Russ DillAM335x: CM3: Rename prmam335x.h to prm335x.h for consis...
2013-08-23 Russ DillCM3: Break apart prcm.h
2013-08-23 Russ DillCM3: Get div for I2C from dpll helper functions.
2013-08-23 Russ DillCM3: Remove unused system_am335.c
2013-08-23 Russ DillCM3: Rename device_am335x.h device_common.h
2013-08-23 Russ DillCM3: Rename constants that are CM3 specific to a CM3...
2013-08-23 Russ DillCM3: Move RTC regs from device_am335x.h to rtc.h
2013-08-23 Russ DillCM3: Move I2C reg offsets from device_am335x to i2c.c
2013-08-23 Russ DillCM3: Move usage of RTCSS_BASE into rtc.c
2013-08-23 Russ DillCM3: Breakout IO functions into separate header.
2013-08-23 Russ DillCM3: Rename GPIO_BASE to GPIO0_BASE.
2013-08-23 Russ DillCM3: Remove un-required includes of system_am335.h
2013-08-23 Russ DillCM3: Move prototypes from system_am335 to i2c.h
2013-08-23 Russ DillCM3: Move prototypes from system_am335 to rtc.h
2013-08-23 Russ DillCM3: Move prototypes from system_am335 to sync.h
2013-08-23 Russ DillCM3: Move prototypes from system_am335 to trace.h
2013-08-23 Russ DillCM3: Move things from system_am335 to pm_handlers.h
2013-08-23 Russ DillCM3: Move relevant prototypes from system_am335 to...
2013-08-23 Russ DillCM3: Move BITBAND defines for WAKE into prcm_core.c
2013-08-23 Russ DillCM3: Remove unused variables and macros from system_am3...
2013-08-23 Russ DillCM3: Create msg.h header for msg.c
2013-08-23 Russ DillCM3: Rename low_power.h to prcm_core.h to match c file.
2013-08-23 Russ DillCM3: Move state_data into it's own file
2013-08-23 Russ DillCM3: Breakout LDO data for am335x/am43xx.
2013-08-23 Russ DillCM3: Make LDO interface generic and separate am335x...
2013-08-23 Russ DillCM3: Breakout LDO control from prcm_core.
2013-08-23 Russ DillCM3: Replace empty wrapper functions in hwmod.c with...
2013-08-23 Russ DillCM3: Replace empty wrapper functions in clockdomain...
2013-08-23 Russ DillCM3: Rename pm_init to pm_reset to better match it...
2013-08-23 Russ DillCM3: Breakout dpll data for am335x/am43xx.
2013-08-23 Russ DillCM3: Rename am33xx_power_up/down_plls to be more generic.
2013-08-23 Russ DillCM3: Break out separate am335x/am43xx DPLL functionalit...
2013-08-23 Russ DillCM3: Add missing DPLL reset function.
2013-08-23 Russ DillCM3: Rework dpll struct to prepare for am335x/am43xx...
2013-08-23 Russ DillCM3: Use enumeration for DPLL index
2013-08-23 Russ DillCM3: Use clockdomain active check in rtc_enable_check.
2013-08-23 Russ DillCM3: Add check for if a clockdomain is active.
2013-08-23 Russ DillAM335X: CM3: Add RTC clockdomain for am335x.
2013-08-23 Russ DillCM3: Breakout DDR functions from prcm_core.
2013-08-23 Russ DillCM3: Breakout dpll from prcm_core.
2013-08-23 Russ DillCM3: Breakout powerdomain data for am335x/am43xx.
2013-08-23 Russ DillCM3: Use powerdomain_id enumeration for PD_MPU/PD_PER
2013-08-23 Russ DillCM3: Formalize register contents bitfields as unsigned int
2013-08-23 Russ DillCM3: Breakout powerdomains from prcm_core.
2013-08-23 Russ DillCM3: Create consistent naming s/module/hwmod
2013-08-23 Russ DillCM3: Breakout hwmod data for am335x/am43xx.
2013-08-23 Russ DillCM3: Breakout hwmod from prcm_core.
2013-08-23 Russ DillCM3: Breakout clockdomain data for am335x/am43xx.
2013-08-23 Russ DillCM3: Breakout clockdomains from prcm_core.
2013-08-23 Russ DillCM3: Move var_mod to device_am335x.h
2013-08-23 Russ DillCM3: Enable/disable clkdms by ID.
2013-08-23 Russ DillCM3: Enable/disable hwmods by ID.
2013-08-23 Russ DillCM3: Track CLKCTRL by hwmod to abstract am43xx/am33xx
2013-08-23 Russ DillCM3: Reorganize PWRSTST and PWRSTCTRL registers under...
2013-08-23 Russ DillCM3: Add clkdms_state_change to make a am335x/am43xx...
2013-08-23 Russ DillCM3: Add modules_state_change to make a am335x/am43xx...
next