evmK2L: Add board config for evmK2L

Signed-off-by: Sam Nelson <sam.nelson@ti.com>

diff --git a/host_bios/simple_buffer_example/host/evmK2L/board.cfg.xs b/host_bios/simple_buffer_example/host/evmK2L/board.cfg.xs
new file mode 100644 (file)
index 0000000..6f8c18a
--- /dev/null
+++ b/host_bios/simple_buffer_example/host/evmK2L/board.cfg.xs
@@ -0,0 +1,68 @@
+var CpIntc =   xdc.useModule('ti.sysbios.family.arm.a15.tci66xx.CpIntc');
+
+var devType = "k2l"
+
+/* Load the OSAL package */ 
+var osType = "tirtos"
+var Osal = xdc.useModule('ti.osal.Settings');
+Osal.osType = osType;
+Osal.socType = devType;
+
+/*use CSL package*/
+var Csl = xdc.loadPackage('ti.csl');
+Csl.Settings.deviceType = devType;
+
+/* Load the uart package */
+var Uart = xdc.loadPackage('ti.drv.uart');
+Uart.Settings.socType = devType;
+
+/* Load the I2C package */
+var I2c                         = xdc.loadPackage('ti.drv.i2c');
+I2c.Settings.socType = devType;
+
+/* Load the Board package and set the board name */
+var Board = xdc.loadPackage('ti.board');
+Board.Settings.boardName = "evmK2L";
+
+/* ================ Cache configuration ================ */
+var Cache  = xdc.useModule('ti.sysbios.family.arm.a15.Cache');
+
+/* Enable the cache */
+Cache.enableCache = true;
+
+/* ================ MMU configuration ================ */
+var Mmu = xdc.useModule('ti.sysbios.family.arm.a15.Mmu');
+
+/* Enable the MMU (Required for L1/L2 data caching) */
+Mmu.enableMMU = true;
+
+/* descriptor attribute structure */
+var peripheralAttrs = new Mmu.DescriptorAttrs();
+
+Mmu.initDescAttrsMeta(peripheralAttrs);
+
+peripheralAttrs.type = Mmu.DescriptorType_BLOCK;  // BLOCK descriptor
+peripheralAttrs.noExecute = true;                 // not executable
+peripheralAttrs.accPerm = 0;                      // read/write at PL1
+peripheralAttrs.attrIndx = 1;                     // MAIR0 Byte1 describes
+                                                      // memory attributes for
+                                                      // each BLOCK MMU entry
+
+/* Define the base address of the 2 MB page
+   the peripheral resides in.
+*/
+var peripheralBaseAddrs = [ 
+  { base: 0x4ae00000, size: 0x00100000 },  // PRM
+  { base: 0x02530C00, size: 0x00000400 },  // UART 0 regs
+  { base: 0x02531000, size: 0x00000400 }   // UART 1 regs
+];
+
+/* Configure the corresponding MMU page descriptor accordingly */
+for (var i =0; i < peripheralBaseAddrs.length; i++)
+{
+  for (var j = 0; j < peripheralBaseAddrs[i].size; j += 0x200000)
+  {
+      var addr = peripheralBaseAddrs[i].base + j;
+      Mmu.setSecondLevelDescMeta(addr, addr, peripheralAttrs);
+  }
+}