Update to test PASDK-80:DSP crashes when CAR dynamically enabled over UART w/ ADC...
[processor-sdk/performance-audio-sr.git] / pasdk / test_dsp / application / itopo / evmk2g / atboot.c
2 /*
3 Copyright (c) 2016, Texas Instruments Incorporated - http://www.ti.com/
4 All rights reserved.
6 * Redistribution and use in source and binary forms, with or without 
7 * modification, are permitted provided that the following conditions
8 * are met:
9 *
10 * Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 *
13 * Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the
16 * distribution.
17 *
18 * Neither the name of Texas Instruments Incorporated nor the names of
19 * its contributors may be used to endorse or promote products derived
20 * from this software without specific prior written permission.
21 *
22 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
23 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
24 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
25 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
26 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
27 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
28 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
29 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
30 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
32 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 *
34 */
36 //
37 //
38 // Initial version obtained from ver 1.10 of i12/evmda830/atboot.c
39 //
41 //#include <ti/procsdk_audio/procsdk_audio_typ.h>
42 #include <procsdk_audio_typ.h>
44 #include <acptype.h>
45 #include <pafaip_a.h>
47 #include <pa_i13_evmk2g_io_a.h> //<pa_i13_evmda830_io_a.h>
49 #ifndef SIMULATE_SIO
51 #ifdef TEST_MULTICHANNEL
52 #define CUS_ATBOOT_S \
53     writeDECChannelMapTo16(PAF_LEFT,PAF_RGHT,8,9,2,12,10,11,-3,-3,-3,-3,-3,-3,-3,-3), \
54     writeENCChannelMapFrom16(PAF_LEFT,PAF_RGHT,8,9,2,12,6,7,-3,-3,-3,-3,-3,-3,-3,-3), \
55     writeVOLControlMasterN(0), \
56     writeVOLOffsetMasterN(0x7fff), \
57     writeSYSRecreationModeDirect, \
58     writeSYSChannelConfigurationRequestSurround2ATMOS_1(4), \
59     execPAIOutAnalogSlave, \
60     execPAIInAnalog
61     //execPAIOutAnalog, \
62     //execPAIInHDMIStereo
63     //
64     //writeENCChannelMapFrom16(PAF_LEFT,PAF_RGHT,8,9,2,12,10,11,-3,-3,-3,-3,-3,-3,-3,-3), \     // Lrs/Rrs
65     //writeENCChannelMapFrom16(PAF_LEFT,PAF_RGHT,8,9,2,12,6,7,-3,-3,-3,-3,-3,-3,-3,-3), \       // Ltm/Rtm
66     //
67     //writeVOLControlMasterN(-80), \
68     //
69     //
70     //writeSYSChannelConfigurationRequestSurround4_1, \
71     //writeSYSChannelConfigurationRequestSurround2ATMOS_1(4), \                                 // L/R,C,LFE,Ls/Rs,Ltm/Rtm
72     //
73     //writeDDPJOCDecodeModeDisable, \
74     //
75     //
76     //execPAIOutAnalogSlave, \
77     //execPAIInAnalog
78     //execPAIOutAnalog, \
79     //execPAIInHDMI
80     //execPAIOutAnalog, \
81     //execPAIInDigital    
82     //
83 #else
85 #define CUS_ATBOOT_S \
86     writeDECChannelMapTo16(PAF_LEFT,PAF_RGHT,-3,-3,-3,-3,-3,-3,-3,-3,-3,-3,-3,-3,-3,-3), \
87     writeENCChannelMapFrom16(PAF_LEFT,PAF_RGHT,-3,-3,-3,-3,-3,-3,-3,-3,-3,-3,-3,-3,-3,-3), \
88     writeVOLControlMasterN(0), \
89     writeVOLOffsetMasterN(0x7fff), \
90     writeSYSRecreationModeDirect, \
91     writeSYSChannelConfigurationRequestStereo, \
92     execPAIOutAnalog, \
93     execPAIInHDMIStereo
94 #endif
96 #else // SIMULATE_SIO
98 #define CUS_ATBOOT_S \
99     writeDECChannelMapTo16  (PAF_LEFT,PAF_RGHT,PAF_LSUR,PAF_RSUR,PAF_CNTR,PAF_SUBW,PAF_LBAK,PAF_RBAK,PAF_LWID,PAF_RWID,PAF_LHED,PAF_RHED,-3,-3,-3,-3), \
100     writeENCChannelMapFrom16(PAF_LEFT,PAF_RGHT,PAF_LSUR,PAF_RSUR,PAF_CNTR,PAF_SUBW,PAF_LBAK,PAF_RBAK,PAF_LWID,PAF_RWID,PAF_LHED,PAF_RHED,-3,-3,-3,-3), \
101     writeVOLControlMasterN(0), \
102     writeVOLOffsetMasterN(0x7fff), \
103     writeSYSRecreationModeDirect, \
104     writeSYSChannelConfigurationRequestSurround4_1, \
105     execPAIOutAnalog, \
106     execPAIInAnalog
107     //execPAIOutNone, \
108     //execPAIInNone
110 #endif // SIMULATE_SIO
112 #pragma DATA_SECTION(cus_atboot_s0_patch, ".none")
113 const ACP_Unit cus_atboot_s0_patch[] = {
114     0xc900 + 0 - 1,
115     CUS_ATBOOT_S,
116 };
118 const ACP_Unit cus_atboot_s_patch[] = {
119     0xc900 + sizeof(cus_atboot_s0_patch)/2 - 1,
120     CUS_ATBOOT_S,
121 };
123 const ACP_Unit cus_atboot_s[] = {
124     0xc900 + sizeof(cus_atboot_s0_patch)/2 - 1,
125     CUS_ATBOOT_S,
126 };
128 const ACP_Unit cus_attime_s[] = {
129     0xc900,
130 };
131 // EOF