Add at-boot testing configuration for MAT-THD decoder.
[processor-sdk/performance-audio-sr.git] / pasdk / test_dsp / application / itopo / evmk2g / atboot.c
2 /*
3 Copyright (c) 2016, Texas Instruments Incorporated - http://www.ti.com/
4 All rights reserved.
6 * Redistribution and use in source and binary forms, with or without 
7 * modification, are permitted provided that the following conditions
8 * are met:
9 *
10 * Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 *
13 * Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the
16 * distribution.
17 *
18 * Neither the name of Texas Instruments Incorporated nor the names of
19 * its contributors may be used to endorse or promote products derived
20 * from this software without specific prior written permission.
21 *
22 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
23 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
24 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
25 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
26 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
27 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
28 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
29 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
30 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
32 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 *
34 */
36 //
37 //
38 // Initial version obtained from ver 1.10 of i12/evmda830/atboot.c
39 //
41 //#include <ti/procsdk_audio/procsdk_audio_typ.h>
42 #include <procsdk_audio_typ.h>
44 #include <acptype.h>
45 #include <pafaip_a.h>
47 #include <pa_i13_evmk2g_io_a.h> //<pa_i13_evmda830_io_a.h>
49 #ifndef SIMULATE_SIO
50 //#define DDP
51 #ifdef TEST_MULTICHANNEL
52 #ifndef DDP
53 //THD
54 #define CUS_ATBOOT_S \
55     writeDECChannelMapTo16(PAF_LEFT,PAF_RGHT,8,9,2,12,10,11,-3,-3,-3,-3,-3,-3,-3,-3), \
56     writeENCChannelMapFrom16(PAF_LEFT,PAF_RGHT,8,9,2,12,10,11,-3,-3,-3,-3,-3,-3,-3,-3), \
57     writeVOLControlMasterN(0), \
58     writeVOLOffsetMasterN(0x7fff), \
59     writeSYSRecreationModeDirect, \
60     writeSYSChannelConfigurationRequestSurround4_1, \
61     writeTHDDRCDisable, \
62     writeTHDDRCCutN(0), \
63     writeTHDDRCBoostN(0), \
64     writeTHDLosslessDisable, \
65     execPAIOutAnalog, \
66     execPAIInHDMI
67 #else
68 //DDP
69 #define CUS_ATBOOT_S \
70     writeDECChannelMapTo16(PAF_LEFT,PAF_RGHT,8,9,2,12,10,11,-3,-3,-3,-3,-3,-3,-3,-3), \
71     writeENCChannelMapFrom16(PAF_LEFT,PAF_RGHT,8,9,2,12,6,7,-3,-3,-3,-3,-3,-3,-3,-3), \
72     writeVOLControlMasterN(0), \
73     writeVOLOffsetMasterN(0x7fff), \
74     writeSYSRecreationModeDirect, \
75     writeSYSChannelConfigurationRequestSurround2ATMOS_1(4), \
76     execPAIOutAnalog, \
77     execPAIInHDMIStereo
78 #endif
79     //
80     //writeENCChannelMapFrom16(PAF_LEFT,PAF_RGHT,8,9,2,12,10,11,-3,-3,-3,-3,-3,-3,-3,-3), \     // Lrs/Rrs
81     //writeENCChannelMapFrom16(PAF_LEFT,PAF_RGHT,8,9,2,12,6,7,-3,-3,-3,-3,-3,-3,-3,-3), \       // Ltm/Rtm
82     //
83     //writeVOLControlMasterN(-80), \
84     //
85     //
86     //writeSYSChannelConfigurationRequestSurround4_1, \
87     //writeSYSChannelConfigurationRequestSurround2ATMOS_1(4), \                                 // L/R,C,LFE,Ls/Rs,Ltm/Rtm
88     //
89     //writeDDPJOCDecodeModeDisable, \
90     //
91     //
92     //execPAIOutNone, \
93     //execPAIInNone
94     //execPAIOutAnalogSlave, \
95     //execPAIInAnalog
96     //execPAIOutAnalog, \
97     //execPAIInHDMI
98     //execPAIOutAnalog, \
99     //execPAIInDigital    
100     //
101 #else
103 #define CUS_ATBOOT_S \
104     writeDECChannelMapTo16(PAF_LEFT,PAF_RGHT,-3,-3,-3,-3,-3,-3,-3,-3,-3,-3,-3,-3,-3,-3), \
105     writeENCChannelMapFrom16(PAF_LEFT,PAF_RGHT,-3,-3,-3,-3,-3,-3,-3,-3,-3,-3,-3,-3,-3,-3), \
106     writeVOLControlMasterN(0), \
107     writeVOLOffsetMasterN(0x7fff), \
108     writeSYSRecreationModeDirect, \
109     writeSYSChannelConfigurationRequestStereo, \
110     execPAIOutAnalog, \
111     execPAIInHDMIStereo
112 #endif
114 #else // SIMULATE_SIO
116 #define CUS_ATBOOT_S \
117     writeDECChannelMapTo16  (PAF_LEFT,PAF_RGHT,PAF_LSUR,PAF_RSUR,PAF_CNTR,PAF_SUBW,PAF_LBAK,PAF_RBAK,PAF_LWID,PAF_RWID,PAF_LHED,PAF_RHED,-3,-3,-3,-3), \
118     writeENCChannelMapFrom16(PAF_LEFT,PAF_RGHT,PAF_LSUR,PAF_RSUR,PAF_CNTR,PAF_SUBW,PAF_LBAK,PAF_RBAK,PAF_LWID,PAF_RWID,PAF_LHED,PAF_RHED,-3,-3,-3,-3), \
119     writeVOLControlMasterN(0), \
120     writeVOLOffsetMasterN(0x7fff), \
121     writeSYSRecreationModeDirect, \
122     writeSYSChannelConfigurationRequestSurround4_1, \
123     execPAIOutAnalog, \
124     execPAIInAnalog
125     //execPAIOutNone, \
126     //execPAIInNone
128 #endif // SIMULATE_SIO
130 #pragma DATA_SECTION(cus_atboot_s0_patch, ".none")
131 const ACP_Unit cus_atboot_s0_patch[] = {
132     0xc900 + 0 - 1,
133     CUS_ATBOOT_S,
134 };
136 const ACP_Unit cus_atboot_s_patch[] = {
137     0xc900 + sizeof(cus_atboot_s0_patch)/2 - 1,
138     CUS_ATBOOT_S,
139 };
141 const ACP_Unit cus_atboot_s[] = {
142     0xc900 + sizeof(cus_atboot_s0_patch)/2 - 1,
143     CUS_ATBOOT_S,
144 };
146 const ACP_Unit cus_attime_s[] = {
147     0xc900,
148 };
149 // EOF