[processor-sdk/performance-audio-sr.git] / pdk_k2g_1_0_1 / packages / ti / board / diag / common / AM437x / diag_osal.c
diff --git a/pdk_k2g_1_0_1/packages/ti/board/diag/common/AM437x/diag_osal.c b/pdk_k2g_1_0_1/packages/ti/board/diag/common/AM437x/diag_osal.c
+++ /dev/null
@@ -1,473 +0,0 @@
-/**
- * @file GPIO_osal.c
- *
- * @brief
- * This is the OS abstraction layer and is used by the GPIO application.
- *
- * \par
- */
-
-/*
- * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- *
- * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the
- * distribution.
- *
- * Neither the name of Texas Instruments Incorporated nor the names of
- * its contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- */
-
-#ifndef COMMON_OSAL_PROTOTYPE
-#define COMMON_OSAL_PROTOTYPE
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <stdint.h>
-#include <ti/drv/uart/src/UART_osal.h>
-//#include <ti/drv/spi/SPI_osal.h>
-
-#define OSAL_OK 0
-/**********************************************************************
- ************************** Local Definitions *************************
- **********************************************************************/
-
-
-/**********************************************************************
- ************************** Global Variables **************************
- **********************************************************************/
-
-/**********************************************************************
- **************************** OSAL Functions **************************
- **********************************************************************/
-
-
-/**
- * @b Description
- * @n
- * The function is used to create a critical section.
- *
- * * @param[in] count
- * Semaphore count value
- *
- * * @param[in] params
- *
- * @retval
- * Semaphore Handle created
- */
-//void* SemOSAL_create(unsigned int count,SemOSAL_Params *params)
-//{
-// return (void *) -1;
-//}
-
-/**
- * @b Description
- * @n
- * The function is used to delete a critical section.
- *
- * @param[in] semHandle
- * Semaphore handle to be deleted
- *
- * @retval
- * Not Applicable
- */
-int SemOSAL_delete(void* handle)
-{
- return 0;
-}
-
-
-/*!
- * @brief Initialize params structure to default values.
- *
- * The default parameters are:
- * - mode: SemOSAL_Mode_COUNTING
- * - name: NULL
- *
- * @param params Pointer to the instance configuration parameters.
- */
-//void SemOSAL_Params_init(SemOSAL_Params *params)
-//{
-//}
-
-/*!
- * @brief Function to pend (wait) on a semaphore.
- *
- * @param handle A SemOSAL_Handle returned from ::SemOSAL_create
- *
- * @param timeout Timeout (in milliseconds) to wait for the semaphore to
- * be posted (signalled).
- *
- * @return Status of the functions
- * - OSAL_OK: Obtain the semaphore
- * - OSAL_TIMEOUT: Timed out. Semaphore was not obtained.
- */
-int SemOSAL_pend(void* handle,unsigned int timeout)
-{
- return (OSAL_OK);
-}
-
-/*!
- * @brief Function to post (signal) a semaphore.
- *
- * @param handle A SemOSAL_Handle returned from ::SemOSAL_create
- *
- * @return Status of the functions
- * - OSAL_OK: Released the semaphore
- */
-int SemOSAL_post(void* semHandle)
-{
- return (OSAL_OK);
-}
-
-/*!
- * @brief Function to disable interrupts to enter a critical region
- *
- * TODO more details
- *
- * @return todo key
- */
-int HwiOSAL_enterCritical()
-{
- return(0);
-}
-
-/*!
- * @brief Function to restore interrupts to exit a critical region
- *
- * TODO more details
- *
- * @param key
- */
-void HwiOSAL_exitCritical(int key)
-{
-}
-
-/*!
- * @brief Function to deregister a interrupt
- *
- * TODO more detail
- *
- * @param hwiPtr
- *
- * @return
- */
-
-int HwiOSAL_deregisterInterrupt(void* hwiPtr)
-{
- return (OSAL_OK);
-}
-
-
-/*!
- * @brief Function to register an interrupt
- *
- * TODO more detail
- *
- * @param interruptNum
- *
- * @param eventID
- *
- * @param entry entry function of the hardware interrupt
- *
- * @param arg argument passed into hte entry function
- *
- * @param priority
- *
- * @return
- */
-#if 0
-void* HwiOSAL_registerInterrupt(int intNum,
- int eventID,
- HwiOSAL_EntryFxn entry,
- void* arg,
- unsigned char priority)
-{
- return (void *) -1;
-}
-#endif
-/**
- * @b Description
- * @n
- * The function is used to disable specific hardware interrupt.
- *
- * @param[in] intrNum number of hardware interrupt which should be disabled.
- *
- * @retval
- * Not Applicable
- */
-void HwiOSAL_disableInterrupt(unsigned int intrNum)
-{
-}
-
-/**
- * @b Description
- * @n
- * The function is used to enable specific hardware interrupt.
- *
- * @param[in] intrNum number of hardware interrupt which should be enabled.
- *
- * @retval
- * Not Applicable
- */
-void HwiOSAL_enableInterrupt(unsigned int intrNum)
-{
-}
-
-
-/*!
- * @brief Debug log function with 1 parameters
- *
- * TODO more detail
- *
- * @param format "printf" format string
- * @param p1 first parameter to format string
- */
-void UART_log1(const char *format, unsigned int p1)
-{
-
-}
-
-/*!
- * @brief Debug log function with 2 parameters
- *
- * TODO more detail
- *
- * @param format "printf" format string
- * @param p1 first parameter to format string
- * @param p2 second parameter to format string
- */
-void UART_log2(const char *format, unsigned int p1, unsigned int p2)
-{
-
-}
-/*!
- * @brief Debug log function with 3 parameters
- *
- * TODO more detail
- *
- * @param format "printf" format string
- * @param p1 first parameter to format string
- * @param p2 second parameter to format string
- * @param p3 third parameter to format string
- */
-void UART_log3(const char *format, unsigned int p1, unsigned int p2, unsigned int p3)
-{
-
-}
-
-/**
- * @b Description
- * @n
- * The function is used to create a critical section.
- *
- * * @param[in] count
- * Semaphore count value
- *
- * * @param[in] params
- *
- * @retval
- * Semaphore Handle created
- */
-
-/*
- * ======== SemaphoreP_create ========
- */
-SemaphoreP_Handle SemaphoreP_create(uint32_t count,
- SemaphoreP_Params *params)
-{
- return NULL;
-}
-
-/**
- * @b Description
- * @n
- * The function is used to delete a critical section.
- *
- * @param[in] semHandle
- * Semaphore handle to be deleted
- *
- * @retval
- * Not Applicable
- */
-/*
- * ======== SemaphoreP_delete ========
- */
-SemaphoreP_Status SemaphoreP_delete(SemaphoreP_Handle handle)
-{
- return (SemaphoreP_OK);
-}
-
-
-/*!
- * @brief Initialize params structure to default values.
- *
- * The default parameters are:
- * - mode: SemOSAL_Mode_COUNTING
- * - name: NULL
- *
- * @param params Pointer to the instance configuration parameters.
- */
-
-/*
- * ======== SemaphoreP_Params_init ========
- */
-void SemaphoreP_Params_init(SemaphoreP_Params *params)
-{
-}
-
-/*!
- * @brief Function to pend (wait) on a semaphore.
- *
- * @param handle A SemOSAL_Handle returned from ::SemOSAL_create
- *
- * @param timeout Timeout (in milliseconds) to wait for the semaphore to
- * be posted (signalled).
- *
- * @return Status of the functions
- * - OSAL_OK: Obtain the semaphore
- * - OSAL_TIMEOUT: Timed out. Semaphore was not obtained.
- */
-/*
- * ======== SemaphoreP_pend ========
- */
-SemaphoreP_Status SemaphoreP_pend(SemaphoreP_Handle handle, uint32_t timeout)
-{
- return (SemaphoreP_OK);
-}
-
-/*!
- * @brief Function to post (signal) a semaphore.
- *
- * @param handle A SemOSAL_Handle returned from ::SemOSAL_create
- *
- * @return Status of the functions
- * - OSAL_OK: Released the semaphore
- */
-/*
- * ======== SemaphoreP_post ========
- */
-SemaphoreP_Status SemaphoreP_post(SemaphoreP_Handle handle)
-{
- return (SemaphoreP_OK);
-}
-
-/*!
- * @brief Function to disable interrupts to enter a critical region
- *
- * TODO more details
- *
- * @return todo key
- */
-/*
- * ======== HwiP_disable ========
- */
-uintptr_t HwiP_disable(void)
-{
- return 0;
-}
-
-/*!
- * @brief Function to restore interrupts to exit a critical region
- *
- * TODO more details
- *
- * @param key
- */
-/*
- * ======== HwiP_restore ========
- */
-void HwiP_restore(uintptr_t key)
-{
-}
-
-/*!
- * @brief Function to deregister a interrupt
- *
- * TODO more detail
- *
- * @param hwiPtr
- *
- * @return
- */
-
-/*
- * ======== HwiP_delete ========
- */
-HwiP_Status HwiP_delete(HwiP_Handle handle)
-{
- return (HwiP_OK);
-}
-
-/**
- * @b Description
- * @n
- * The function is used to disable specific hardware interrupt.
- *
- * @param[in] intrNum number of hardware interrupt which should be disabled.
- *
- * @retval
- * Not Applicable
- */
-/*
- * ======== HwiP_disableInterrupt ========
- */
-void HwiP_disableInterrupt(int32_t interruptNum)
-{
-}
-
-/**
- * @b Description
- * @n
- * The function is used to enable specific hardware interrupt.
- *
- * @param[in] intrNum number of hardware interrupt which should be enabled.
- *
- * @retval
- * Not Applicable
- */
-/*
- * ======== HwiP_enableInterrupt ========
- */
-void HwiP_enableInterrupt(int32_t interruptNum)
-{
-}
-
-void HwiP_Params_init(HwiP_Params *params)
-{
-}
-
-HwiP_Handle HwiP_create(int32_t interruptNum, HwiP_Fxn hwiFxn,
- HwiP_Params *params)
-{
- return (void *) -1;
-}
-
-void _DebugP_assert(int32_t expression, const char *file, int32_t line)
-{
- if (expression)
- while (1);
-}
-#endif /* COMMON_OSAL_PROTOTYPE */