diff --git a/pdk_k2g_1_0_1/packages/ti/csl/csl_vcp2.h b/pdk_k2g_1_0_1/packages/ti/csl/csl_vcp2.h
+++ /dev/null
@@ -1,447 +0,0 @@
-/* ============================================================================
- * Copyright (c) Texas Instruments Incorporated 2008, 2009
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- *
- * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the
- * distribution.
- *
- * Neither the name of Texas Instruments Incorporated nor the names of
- * its contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
-*/
-
-/**
- * @file csl_vcp2.h
- *
- * @brief
- * Header file with data structure and API declarations for VCP2
- * CSL module.
- *
- * \par
- * ============================================================================
- * @n (C) Copyright 2008, 2009, Texas Instruments, Inc.
- * @n Use of this software is controlled by the terms and conditions found
- * @n in the license agreement under which this software has been supplied.
- * ===========================================================================
- * \par
- */
-
-/** @defgroup CSL_VCP2_API VCP2
- *
- * @section Introduction
- *
- * @subsection xxx Overview
- * Channel decoding of voice and low bit-rate data channels found in cellular standards such as 2.5G, 3G,
- * and WiMAX requires the decoding of convolutional encoded data. The Viterbi-decoder coprocessor 2
- * (VCP2) provided in the TCI648x devices performs Viterbi decoding for IS2000 and 3GPP wireless
- * standards. The VCP2 coprocessor also performs forward-error correction for 2G and 3G wireless systems.
- * The VCP2 coprocessor offers a very cost effective and synergistic solution when combined with Texas
- * Instruments (TI) DSPs. The VCP2 supports 1941 12.2 Kbps class A 3G voice channels running at
- * 333 MHz.
- *
- * @subsection References
- * -# VCP2 User's Guide SPRUE09A.pdf (May 2006 - Revised April 2008)
- *
- */
-#ifndef CSL_VCP2__H
-#define CSL_VCP2__H
-
-#include <ti/csl/csl.h>
-#include <ti/csl/cslr_vcp2.h>
-#include <ti/csl/soc.h>
-
-/**
-@defgroup CSL_VCP2_SYMBOL VCP2 Symbols Defined
-@ingroup CSL_VCP2_API
-*/
-/**
-@defgroup CSL_VCP2_DATASTRUCT VCP2 Data Structures
-@ingroup CSL_VCP2_API
-*/
-/**
-@defgroup CSL_VCP2_FUNCTION VCP2 Functions
-@ingroup CSL_VCP2_API
-*/
-
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-
-/**
-@addtogroup CSL_VCP2_SYMBOL
-@{
-*/
-
-/******************************************************************************
- * VCP Macros
- *****************************************************************************/
-/** Code rate = 2 */
-#define VCP2_RATE_1_2 (2U)
-/** Code rate = 3 */
-#define VCP2_RATE_1_3 (3U)
-/** Code rate = 4 */
-#define VCP2_RATE_1_4 (4U)
-
-/** Speed critical */
-#define VCP2_SPEED_CRITICAL (0U)
-/** Speed most critical */
-#define VCP2_SPEED_MOST_CRITICAL (1U)
-/** Performance critical */
-#define VCP2_PERF_CRITICAL (2U)
-/** Performance most critical */
-#define VCP2_PERF_MOST_CRITICAL (3U)
-/** Default value */
-#define VCP2_PERF_DEFAULT (VCP2_SPEED_CRITICAL)
-
-/** Out order of VCP output for decoded data : 0 to 31 */
-#define VCP2_OUTORDER_0_31 (CSL_VCP2_VCPIC3_OUT_ORDER_LSB)
-/** Out order of VCP output for decoded data : 31 to 0 */
-#define VCP2_OUTORDER_31_0 (CSL_VCP2_VCPIC3_OUT_ORDER_MSB)
-
-/** Output decision type : Hard decisions */
-#define VCP2_DECISION_HARD (CSL_VCP2_VCPIC5_SDHD_HARD)
-/** Output decision type : Soft decisions */
-#define VCP2_DECISION_SOFT (CSL_VCP2_VCPIC5_SDHD_SOFT)
-
-/** Output parameters read flag : VCP read event is not generated */
-#define VCP2_OUTF_NO (CSL_VCP2_VCPIC5_OUTF_NO)
-/** Output parameters read flag : VCP read event is generated */
-#define VCP2_OUTF_YES (CSL_VCP2_VCPIC5_OUTF_YES)
-
-/** No trace back allowed */
-#define VCP2_TRACEBACK_NONE (CSL_VCP2_VCPIC5_TB_NO)
-/** Traceback mode : Tailed */
-#define VCP2_TRACEBACK_TAILED (CSL_VCP2_VCPIC5_TB_TAIL)
-/** Traceback mode : Convergent */
-#define VCP2_TRACEBACK_CONVERGENT (CSL_VCP2_VCPIC5_TB_CONV)
-/** Traceback mode : Mixed */
-#define VCP2_TRACEBACK_MIXED (CSL_VCP2_VCPIC5_TB_MIX)
-
-/**
- * VCP unpause type : VCP restarts and processes one sliding window before
- * pausing again
- */
-#define VCP2_UNPAUSE_ONESW (CSL_VCP2_VCPEXE_COMMAND_RESTART_PAUSE)
-/** VCP unpause type : VCP restarts */
-#define VCP2_UNPAUSE_NORMAL (CSL_VCP2_VCPEXE_COMMAND_RESTART)
-
-/** Soft decisions memory format : 32-bit word packed */
-#define VCP2_END_PACKED32 (CSL_VCP2_VCPEND_SD_32BIT)
-/** Soft decisions memory format : Native (8 bits) */
-#define VCP2_END_NATIVE (CSL_VCP2_VCPEND_SD_NATIVE)
-
-/** EMU mode : VCP halts at the end of completion of the current window of
- * state metric processing or at the end of a frame */
-#define VCP2_EMUHALT_DEFAULT (CSL_VCP2_VCPEMU_SOFT_HALT_DEFAULT)
-/**
- * EMU mode : VCP halts at the end of completion of the processing of the
- * frame
- */
-#define VCP2_EMUHALT_FRAMEEND (CSL_VCP2_VCPEMU_SOFT_HALT_FRAMEEND)
-
-/***************************************************************************
- * Following are Polynomials used in GSM/Edge/GPRS
- **************************************************************************/
-
-/**
- * GSM/Edge/GPRS generator polynomial 0
- */
-#define VCP2_GEN_POLY_0 0x30
-
-/**
- * GSM/Edge/GPRS generator polynomial 1
- */
-#define VCP2_GEN_POLY_1 0xB0
-
-/**
- * GSM/Edge/GPRS generator polynomial 2
- */
-#define VCP2_GEN_POLY_2 0x50
-
-/**
- * GSM/Edge/GPRS generator polynomial 3
- */
-#define VCP2_GEN_POLY_3 0xF0
-
-/**
- * GSM/Edge/GPRS generator polynomial 4
- */
-#define VCP2_GEN_POLY_4 0x6C
-
-/**
- * GSM/Edge/GPRS generator polynomial 5
- */
-#define VCP2_GEN_POLY_5 0x94
-
-/**
- * GSM/Edge/GPRS generator polynomial 6
- */
-#define VCP2_GEN_POLY_6 0xF4
-
-/**
- * GSM/Edge/GPRS generator polynomial 7
- */
-#define VCP2_GEN_POLY_7 0xE4
-
-/**
- * NULL generator polynomial for GSM/Edge/GPRS
- */
-#define VCP2_GEN_POLY_GNULL 0x00
-
-/**
-@}
-*/
-
-/** @addtogroup CSL_VCP2_DATASTRUCT
- @{ */
-
-/** VCP Peripheral ID structure */
-typedef struct
-{
- /** Peripheral type */
- Uint8 type;
- /** Peripheral class */
- Uint8 pid_class;
- /** Peripheral revision */
- Uint8 rev;
-} VCP2_PID;
-
-/**
- * VCP code rate type
- */
-typedef Uint32 VCP2_Rate;
-
-/**
- * VCP input configuration structure that holds all of the configuration
- * values that are to be transferred to the VCP via the EDMA.
- */
-typedef struct
-{
- /** Value of VCP input configuration register 0 */
- Uint32 ic0;
- /** Value of VCP input configuration register 1 */
- Uint32 ic1;
- /** Value of VCP input configuration register 2 */
- Uint32 ic2;
- /** Value of VCP input configuration register 3 */
- Uint32 ic3;
- /** Value of VCP input configuration register 4 */
- Uint32 ic4;
- /** Value of VCP input configuration register 5 */
- Uint32 ic5;
-} VCP2_ConfigIc;
-
-/**
- * VCP channel parameters structure that holds all of the information
- * concerning the user channel. These values are used to generate the
- * appropriate input configuration values for the VCP and to program
- * the EDMA.
- */
-typedef struct
-{
- /** Code rate */
- VCP2_Rate rate;
- /** Constraint length */
- Uint8 constLen;
- /** Polynomial 0 */
- Uint8 poly0;
- /** Polynomial 1 */
- Uint8 poly1;
- /** Polynomial 2 */
- Uint8 poly2;
- /** Polynomial 3 */
- Uint8 poly3;
- /** Yamamoto threshold value*/
- Uint16 yamTh;
- /** Frame length i.e. number of symbols in a frame*/
- Uint16 frameLen;
- /** Reliability length */
- Uint16 relLen;
- /** Convergence distance */
- Uint16 convDist;
- /** Traceback state index */
- Uint16 traceBackIndex;
- /** Traceback state index enable/disable */
- Bool traceBackEn;
- /** Hard decision output ordering */
- Uint16 outOrder;
- /** Maximum initial state metric */
- Int16 maxSm;
- /** Minimum initial state metric */
- Int16 minSm;
- /** State index set to the maximum initial state metric*/
- Uint8 stateNum;
- /** Branch metrics buffer length in input FIFO */
- Uint8 bmBuffLen;
- /** Decisions buffer length in output FIFO */
- Uint8 decBuffLen;
- /** Traceback mode */
- Uint8 traceBack;
- /** Output parameters read flag */
- Uint8 readFlag;
- /** Decision selection: hard or soft */
- Uint8 decision;
- /** Number of branch metric frames*/
- Uint16 numBmFrames;
- /** Number of decision frames */
- Uint16 numDecFrames;
-} VCP2_Params;
-
-/**
- * VCP base parameter structure that is used to configure the VCP parameters
- * structure with the given values using VCP2_genParams() function.
- */
-typedef struct
-{
- /** Code rate */
- VCP2_Rate rate;
- /** Constraint length */
- Uint8 constLen;
- /** Frame length */
- Uint16 frameLen;
- /** Yamamoto threshold value */
- Uint16 yamTh;
- /** Maximum initial state metric value */
- Uint8 stateNum;
- /** Traceback convergement mode */
- Bool tbConvrgMode;
- /** Output decision type */
- Uint8 decision;
- /** Output parameters read flag */
- Uint8 readFlag;
- /** Enable/Disable tail biting */
- Bool tailBitEnable;
- /** Tailbiting traceback index mode */
- Uint16 traceBackIndex;
- /** Hard decision output ordering */
- Uint8 outOrder;
- /** Performance and speed */
- Uint8 perf;
-} VCP2_BaseParams;
-
-/** VCP Error structure */
-typedef struct
-{
- /** Traceback mode error */
- Bool tbnaErr;
- /** Frame length error */
- Bool ftlErr;
- /** Reliability + convergence distance error */
- Bool fctlErr;
- /** Max-Min error */
- Bool maxminErr;
- /** SYMX error */
- Bool symxErr;
- /** SYMR error */
- Bool symrErr;
-} VCP2_Errors;
-
-/** VCP generator polynomials structure */
-typedef struct
-{
- /** Generator polynomial 0 */
- Uint8 poly0;
- /** Generator polynomial 1 */
- Uint8 poly1;
- /** Generator polynomial 2 */
- Uint8 poly2;
- /** Generator polynomial 3 */
- Uint8 poly3;
-} VCP2_Poly;
-
-/**************************************************************************\
-* Overlay structure typedef definition
-\**************************************************************************/
-typedef volatile CSL_Vcp2EdmaRegs *CSL_Vcp2RegsOvly;
-typedef volatile CSL_Vcp2ConfigRegs *CSL_Vcp2CfgRegsOvly;
-
-
-/**
- * This will have the base-address information for the peripheral instance
- */
-typedef struct {
- /** Base-address of the registers of VCP2 */
- CSL_Vcp2RegsOvly regs;
- /** Base-address of the Configuration registers of VCP2 */
- CSL_Vcp2CfgRegsOvly cfgregs;
-} VCP2BaseAddress;
-
-/**
- * This structure/object holds the context of the instance of VCP2
- * opened using VCP2_init() function.
- *
- * Pointer to this object is passed as VCP2 Handle to all VCP2 CSL APIs.
- * VCP2_init() function intializes this structure based on the parameters
- * passed
- */
-typedef struct VCP2Obj_s {
- /** Pointer to the register overlay structure of the Tcp2 */
- CSL_Vcp2RegsOvly regs;
- /** Pointer to the Configuration registers overlay structure of the Tcp2 */
- CSL_Vcp2CfgRegsOvly cfgregs;
- /** Instance of TCP2 being referred by this object */
- CSL_InstNum perNum;
-} VCP2Obj;
-
-/** This is a pointer to Vcp2Obj and is passed as the first
- * parameter to all VCP2 CSL APIs
- */
-typedef struct VCP2Obj_s *VCP2Handle;
-
-/* @} */
-
-/** @addtogroup CSL_VCP2_FUNCTION
- @{ */
-
-/******************************************************************************
- * VCP2 global function declarations
- *****************************************************************************/
-
-extern void VCP2_genParams (
- const VCP2_BaseParams * pConfigBase,
- VCP2_Params * pConfigParams
-);
-
-extern void VCP2_genIc (
- const VCP2_Params * pConfigParams,
- VCP2_ConfigIc * pConfigIc
-);
-
-extern VCP2Handle VCP2_init(
- VCP2Obj * pVcp2Obj,
- Int32 instNum,
- Int32 * pStatus
-);
-
-extern CSL_Status VCP2_Close (
- VCP2Handle hVcp2
-);
-
-/* @} */
-#ifdef __cplusplus
-}
-#endif
-
-#endif