1 /*
2 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
9 /* AM437x GP EVM */
11 /dts-v1/;
13 #include "am4372.dtsi"
14 #include <dt-bindings/pinctrl/am43xx.h>
15 #include <dt-bindings/pwm/pwm.h>
16 #include <dt-bindings/gpio/gpio.h>
18 / {
19 model = "TI AM437x GP EVM";
20 compatible = "ti,am437x-gp-evm","ti,am4372","ti,am43";
22 aliases {
23 display0 = &lcd0;
24 };
26 chosen {
27 stdout-path = &uart0;
28 };
30 evm_v3_3d: fixedregulator-v3_3d {
31 compatible = "regulator-fixed";
32 regulator-name = "evm_v3_3d";
33 regulator-min-microvolt = <3300000>;
34 regulator-max-microvolt = <3300000>;
35 enable-active-high;
36 };
38 vtt_fixed: fixedregulator-vtt {
39 compatible = "regulator-fixed";
40 regulator-name = "vtt_fixed";
41 regulator-min-microvolt = <1500000>;
42 regulator-max-microvolt = <1500000>;
43 regulator-always-on;
44 regulator-boot-on;
45 enable-active-high;
46 gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
47 };
49 vmmcwl_fixed: fixedregulator-mmcwl {
50 compatible = "regulator-fixed";
51 regulator-name = "vmmcwl_fixed";
52 regulator-min-microvolt = <1800000>;
53 regulator-max-microvolt = <1800000>;
54 gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>;
55 enable-active-high;
56 };
58 lcd_bl: backlight {
59 compatible = "pwm-backlight";
60 pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
61 brightness-levels = <0 51 53 56 62 75 101 152 255>;
62 default-brightness-level = <8>;
63 };
65 matrix_keypad: matrix_keypad0 {
66 compatible = "gpio-matrix-keypad";
67 debounce-delay-ms = <5>;
68 col-scan-delay-us = <2>;
70 row-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH /* Bank3, pin21 */
71 &gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */
72 &gpio4 2 GPIO_ACTIVE_HIGH>; /* Bank4, pin2 */
74 col-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH /* Bank3, pin19 */
75 &gpio3 20 GPIO_ACTIVE_HIGH>; /* Bank3, pin20 */
77 linux,keymap = <0x00000201 /* P1 */
78 0x00010202 /* P2 */
79 0x01000067 /* UP */
80 0x0101006a /* RIGHT */
81 0x02000069 /* LEFT */
82 0x0201006c>; /* DOWN */
83 };
85 lcd0: display {
86 compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
87 label = "lcd";
89 backlight = <&lcd_bl>;
91 panel-timing {
92 clock-frequency = <33000000>;
93 hactive = <800>;
94 vactive = <480>;
95 hfront-porch = <210>;
96 hback-porch = <16>;
97 hsync-len = <30>;
98 vback-porch = <10>;
99 vfront-porch = <22>;
100 vsync-len = <13>;
101 hsync-active = <0>;
102 vsync-active = <0>;
103 de-active = <1>;
104 pixelclk-active = <1>;
105 };
107 port {
108 lcd_in: endpoint {
109 remote-endpoint = <&dpi_out>;
110 };
111 };
112 };
114 /* fixed 12MHz oscillator */
115 refclk: oscillator {
116 #clock-cells = <0>;
117 compatible = "fixed-clock";
118 clock-frequency = <12000000>;
119 };
121 /* fixed 32k external oscillator clock */
122 clk_32k_rtc: clk_32k_rtc {
123 #clock-cells = <0>;
124 compatible = "fixed-clock";
125 clock-frequency = <32768>;
126 };
128 sound0: sound0 {
129 compatible = "simple-audio-card";
130 simple-audio-card,name = "AM437x-GP-EVM";
131 simple-audio-card,widgets =
132 "Headphone", "Headphone Jack",
133 "Line", "Line In";
134 simple-audio-card,routing =
135 "Headphone Jack", "HPLOUT",
136 "Headphone Jack", "HPROUT",
137 "LINE1L", "Line In",
138 "LINE1R", "Line In";
139 simple-audio-card,format = "dsp_b";
140 simple-audio-card,bitclock-master = <&sound0_master>;
141 simple-audio-card,frame-master = <&sound0_master>;
142 simple-audio-card,bitclock-inversion;
144 simple-audio-card,cpu {
145 sound-dai = <&mcasp1>;
146 system-clock-frequency = <12000000>;
147 };
149 sound0_master: simple-audio-card,codec {
150 sound-dai = <&tlv320aic3106>;
151 system-clock-frequency = <12000000>;
152 };
153 };
155 beeper: beeper {
156 compatible = "gpio-beeper";
157 pinctrl-names = "default";
158 pinctrl-0 = <&beeper_pins>;
159 gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
160 };
161 };
163 &am43xx_pinmux {
164 pinctrl-names = "default", "sleep";
165 pinctrl-0 = <&wlan_pins_default>;
166 pinctrl-1 = <&wlan_pins_sleep>;
168 i2c0_pins: i2c0_pins {
169 pinctrl-single,pins = <
170 AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
171 AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
172 >;
173 };
175 i2c1_pins: i2c1_pins {
176 pinctrl-single,pins = <
177 AM4372_IOPAD(0x95c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */
178 AM4372_IOPAD(0x958, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */
179 >;
180 };
182 mmc1_pins: pinmux_mmc1_pins {
183 pinctrl-single,pins = <
184 AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
185 >;
186 };
188 ecap0_pins: backlight_pins {
189 pinctrl-single,pins = <
190 AM4372_IOPAD(0x964, MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
191 >;
192 };
194 pixcir_ts_pins: pixcir_ts_pins {
195 pinctrl-single,pins = <
196 AM4372_IOPAD(0xa64, PIN_INPUT_PULLUP | MUX_MODE7) /* spi2_d0.gpio3_22 */
197 >;
198 };
200 cpsw_default: cpsw_default {
201 pinctrl-single,pins = <
202 /* Slave 1 */
203 AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_txen */
204 AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rxctl */
205 AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd3 */
206 AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd2 */
207 AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd1 */
208 AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd0 */
209 AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */
210 AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */
211 AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd3 */
212 AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd2 */
213 AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */
214 AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */
215 >;
216 };
218 cpsw_sleep: cpsw_sleep {
219 pinctrl-single,pins = <
220 /* Slave 1 reset value */
221 AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
222 AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
223 AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
224 AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
225 AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
226 AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
227 AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
228 AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
229 AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
230 AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
231 AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
232 AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
233 >;
234 };
236 davinci_mdio_default: davinci_mdio_default {
237 pinctrl-single,pins = <
238 /* MDIO */
239 AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
240 AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
241 >;
242 };
244 davinci_mdio_sleep: davinci_mdio_sleep {
245 pinctrl-single,pins = <
246 /* MDIO reset value */
247 AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
248 AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
249 >;
250 };
252 nand_flash_x8: nand_flash_x8 {
253 pinctrl-single,pins = <
254 AM4372_IOPAD(0x800, PIN_INPUT | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
255 AM4372_IOPAD(0x804, PIN_INPUT | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
256 AM4372_IOPAD(0x808, PIN_INPUT | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
257 AM4372_IOPAD(0x80c, PIN_INPUT | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
258 AM4372_IOPAD(0x810, PIN_INPUT | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
259 AM4372_IOPAD(0x814, PIN_INPUT | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
260 AM4372_IOPAD(0x818, PIN_INPUT | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
261 AM4372_IOPAD(0x81c, PIN_INPUT | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
262 AM4372_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
263 AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpmc_wpn */
264 AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
265 AM4372_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
266 AM4372_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
267 AM4372_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
268 AM4372_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
269 >;
270 };
272 dss_pins: dss_pins {
273 pinctrl-single,pins = <
274 AM4372_IOPAD(0x820, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
275 AM4372_IOPAD(0x824, PIN_OUTPUT_PULLUP | MUX_MODE1)
276 AM4372_IOPAD(0x828, PIN_OUTPUT_PULLUP | MUX_MODE1)
277 AM4372_IOPAD(0x82c, PIN_OUTPUT_PULLUP | MUX_MODE1)
278 AM4372_IOPAD(0x830, PIN_OUTPUT_PULLUP | MUX_MODE1)
279 AM4372_IOPAD(0x834, PIN_OUTPUT_PULLUP | MUX_MODE1)
280 AM4372_IOPAD(0x838, PIN_OUTPUT_PULLUP | MUX_MODE1)
281 AM4372_IOPAD(0x83c, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
282 AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
283 AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0)
284 AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0)
285 AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0)
286 AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0)
287 AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0)
288 AM4372_IOPAD(0x8b8, PIN_OUTPUT_PULLUP | MUX_MODE0)
289 AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0)
290 AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0)
291 AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0)
292 AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0)
293 AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0)
294 AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0)
295 AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0)
296 AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0)
297 AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
298 AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
299 AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
300 AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
301 AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
303 >;
304 };
306 display_mux_pins: display_mux_pins {
307 pinctrl-single,pins = <
308 /* GPIO 5_8 to select LCD / HDMI */
309 AM4372_IOPAD(0xa38, PIN_OUTPUT_PULLUP | MUX_MODE7)
310 >;
311 };
313 dcan0_default: dcan0_default_pins {
314 pinctrl-single,pins = <
315 AM4372_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2) /* uart1_ctsn.d_can0_tx */
316 AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_rtsn.d_can0_rx */
317 >;
318 };
320 dcan0_sleep: dcan0_sleep_pins {
321 pinctrl-single,pins = <
322 AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_ctsn.gpio0_12 */
323 AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rtsn.gpio0_13 */
324 >;
325 };
327 dcan1_default: dcan1_default_pins {
328 pinctrl-single,pins = <
329 AM4372_IOPAD(0x980, PIN_OUTPUT | MUX_MODE2) /* uart1_rxd.d_can1_tx */
330 AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_txd.d_can1_rx */
331 >;
332 };
334 dcan1_sleep: dcan1_sleep_pins {
335 pinctrl-single,pins = <
336 AM4372_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rxd.gpio0_14 */
337 AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_txd.gpio0_15 */
338 >;
339 };
341 vpfe0_pins_default: vpfe0_pins_default {
342 pinctrl-single,pins = <
343 AM4372_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/
344 AM4372_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/
345 AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/
346 AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/
347 AM4372_IOPAD(0x9c8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/
348 AM4372_IOPAD(0xa08, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/
349 AM4372_IOPAD(0xa0c, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/
350 AM4372_IOPAD(0xa10, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/
351 AM4372_IOPAD(0xa14, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/
352 AM4372_IOPAD(0xa18, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/
353 AM4372_IOPAD(0xa1c, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/
354 AM4372_IOPAD(0xa20, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/
355 AM4372_IOPAD(0xa24, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/
356 >;
357 };
359 vpfe0_pins_sleep: vpfe0_pins_sleep {
360 pinctrl-single,pins = <
361 AM4372_IOPAD(0x9b0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_hd mode 0*/
362 AM4372_IOPAD(0x9b4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_vd mode 0*/
363 AM4372_IOPAD(0x9c0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_pclk mode 0*/
364 AM4372_IOPAD(0x9c4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data8 mode 0*/
365 AM4372_IOPAD(0x9c8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data9 mode 0*/
366 AM4372_IOPAD(0xa08, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data0 mode 0*/
367 AM4372_IOPAD(0xa0c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data1 mode 0*/
368 AM4372_IOPAD(0xa10, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data2 mode 0*/
369 AM4372_IOPAD(0xa14, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data3 mode 0*/
370 AM4372_IOPAD(0xa18, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data4 mode 0*/
371 AM4372_IOPAD(0xa1c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data5 mode 0*/
372 AM4372_IOPAD(0xa20, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data6 mode 0*/
373 AM4372_IOPAD(0xa24, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data7 mode 0*/
374 >;
375 };
377 vpfe1_pins_default: vpfe1_pins_default {
378 pinctrl-single,pins = <
379 AM4372_IOPAD(0x9cc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0*/
380 AM4372_IOPAD(0x9d0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0*/
381 AM4372_IOPAD(0x9d4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0*/
382 AM4372_IOPAD(0x9d8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0*/
383 AM4372_IOPAD(0x9dC, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0*/
384 AM4372_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0*/
385 AM4372_IOPAD(0x9ec, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0*/
386 AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0*/
387 AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0*/
388 AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0*/
389 AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0*/
390 AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0*/
391 AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0*/
392 >;
393 };
395 vpfe1_pins_sleep: vpfe1_pins_sleep {
396 pinctrl-single,pins = <
397 AM4372_IOPAD(0x9cc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data9 mode 0*/
398 AM4372_IOPAD(0x9d0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data8 mode 0*/
399 AM4372_IOPAD(0x9d4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_hd mode 0*/
400 AM4372_IOPAD(0x9d8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_vd mode 0*/
401 AM4372_IOPAD(0x9dc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_pclk mode 0*/
402 AM4372_IOPAD(0x9e8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data0 mode 0*/
403 AM4372_IOPAD(0x9ec, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data1 mode 0*/
404 AM4372_IOPAD(0x9f0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data2 mode 0*/
405 AM4372_IOPAD(0x9f4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data3 mode 0*/
406 AM4372_IOPAD(0x9f8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data4 mode 0*/
407 AM4372_IOPAD(0x9fc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data5 mode 0*/
408 AM4372_IOPAD(0xa00, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data6 mode 0*/
409 AM4372_IOPAD(0xa04, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data7 mode 0*/
410 >;
411 };
413 mmc3_pins_default: pinmux_mmc3_pins_default {
414 pinctrl-single,pins = <
415 AM4372_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk */
416 AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */
417 AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0 */
418 AM4372_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1 */
419 AM4372_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2 */
420 AM4372_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be1n.mmc2_dat3 */
421 >;
422 };
424 mmc3_pins_sleep: pinmux_mmc3_pins_sleep {
425 pinctrl-single,pins = <
426 AM4372_IOPAD(0x88c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_clk.mmc2_clk */
427 AM4372_IOPAD(0x888, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.mmc2_cmd */
428 AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a1.mmc2_dat0 */
429 AM4372_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a2.mmc2_dat1 */
430 AM4372_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a3.mmc2_dat2 */
431 AM4372_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_be1n.mmc2_dat3 */
432 >;
433 };
435 wlan_pins_default: pinmux_wlan_pins_default {
436 pinctrl-single,pins = <
437 AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */
438 AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/
439 AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/
440 >;
441 };
443 wlan_pins_sleep: pinmux_wlan_pins_sleep {
444 pinctrl-single,pins = <
445 AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */
446 AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/
447 AM4372_IOPAD(0x840, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/
448 >;
449 };
451 uart3_pins: uart3_pins {
452 pinctrl-single,pins = <
453 AM4372_IOPAD(0xa28, PIN_INPUT | MUX_MODE0) /* uart3_rxd.uart3_rxd */
454 AM4372_IOPAD(0xa2c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */
455 AM4372_IOPAD(0xa30, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_ctsn.uart3_ctsn */
456 AM4372_IOPAD(0xa34, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */
457 >;
458 };
460 mcasp1_pins: mcasp1_pins {
461 pinctrl-single,pins = <
462 AM4372_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
463 AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
464 AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
465 AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
466 >;
467 };
469 mcasp1_sleep_pins: mcasp1_sleep_pins {
470 pinctrl-single,pins = <
471 AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
472 AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
473 AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
474 AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
475 >;
476 };
478 gpio0_pins: gpio0_pins {
479 pinctrl-single,pins = <
480 AM4372_IOPAD(0xa6c, PIN_OUTPUT | MUX_MODE9) /* spi2_cs0.gpio0_23 SEL_eMMCorNANDn */
481 >;
482 };
484 emmc_pins_default: emmc_pins_default {
485 pinctrl-single,pins = <
486 AM4372_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
487 AM4372_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
488 AM4372_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
489 AM4372_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
490 AM4372_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
491 AM4372_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
492 AM4372_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
493 AM4372_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
494 AM4372_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
495 AM4372_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
496 >;
497 };
499 emmc_pins_sleep: emmc_pins_sleep {
500 pinctrl-single,pins = <
501 AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad0.gpio1_0 */
502 AM4372_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad1.gpio1_1 */
503 AM4372_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad2.gpio1_2 */
504 AM4372_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad3.gpio1_3 */
505 AM4372_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */
506 AM4372_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */
507 AM4372_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */
508 AM4372_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */
509 AM4372_IOPAD(0x880, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.gpio1_30 */
510 AM4372_IOPAD(0x884, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.gpio1_31 */
511 >;
512 };
514 uart0_pins_default: uart0_pins_default {
515 pinctrl-single,pins = <
516 AM4372_IOPAD(0x968, PIN_INPUT | MUX_MODE0) /* uart0_ctsn.uart0_ctsn */
517 AM4372_IOPAD(0x96C, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_rtsn.uart0_rtsn */
518 AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
519 AM4372_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
520 >;
521 };
523 beeper_pins: beeper_pins {
524 pinctrl-single,pins = <
525 AM4372_IOPAD(0x9e0, PIN_OUTPUT_PULLUP | MUX_MODE7) /* cam1_field.gpio4_12 */
526 >;
527 };
529 };
531 &uart0 {
532 status = "okay";
533 pinctrl-names = "default";
534 pinctrl-0 = <&uart0_pins_default>;
535 };
537 &i2c0 {
538 status = "okay";
539 pinctrl-names = "default";
540 pinctrl-0 = <&i2c0_pins>;
541 clock-frequency = <100000>;
543 tps65218: tps65218@24 {
544 reg = <0x24>;
545 compatible = "ti,tps65218";
546 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* NMIn */
547 interrupt-controller;
548 #interrupt-cells = <2>;
550 dcdc1: regulator-dcdc1 {
551 regulator-name = "vdd_core";
552 regulator-min-microvolt = <912000>;
553 regulator-max-microvolt = <1144000>;
554 regulator-boot-on;
555 regulator-always-on;
556 };
558 dcdc2: regulator-dcdc2 {
559 regulator-name = "vdd_mpu";
560 regulator-min-microvolt = <912000>;
561 regulator-max-microvolt = <1378000>;
562 regulator-boot-on;
563 regulator-always-on;
564 };
566 dcdc3: regulator-dcdc3 {
567 regulator-name = "vdcdc3";
568 regulator-boot-on;
569 regulator-always-on;
570 regulator-state-mem {
571 regulator-on-in-suspend;
572 };
573 regulator-state-disk {
574 regulator-off-in-suspend;
575 };
576 };
578 dcdc5: regulator-dcdc5 {
579 regulator-name = "v1_0bat";
580 regulator-min-microvolt = <1000000>;
581 regulator-max-microvolt = <1000000>;
582 regulator-boot-on;
583 regulator-always-on;
584 regulator-state-mem {
585 regulator-on-in-suspend;
586 };
587 };
589 dcdc6: regulator-dcdc6 {
590 regulator-name = "v1_8bat";
591 regulator-min-microvolt = <1800000>;
592 regulator-max-microvolt = <1800000>;
593 regulator-boot-on;
594 regulator-always-on;
595 regulator-state-mem {
596 regulator-on-in-suspend;
597 };
598 };
600 ldo1: regulator-ldo1 {
601 regulator-min-microvolt = <1800000>;
602 regulator-max-microvolt = <1800000>;
603 regulator-boot-on;
604 regulator-always-on;
605 };
606 };
608 ov2659@30 {
609 compatible = "ovti,ov2659";
610 reg = <0x30>;
612 clocks = <&refclk 0>;
613 clock-names = "xvclk";
615 port {
616 ov2659_0: endpoint {
617 remote-endpoint = <&vpfe1_ep>;
618 link-frequencies = /bits/ 64 <70000000>;
619 };
620 };
621 };
622 };
624 &i2c1 {
625 status = "okay";
626 pinctrl-names = "default";
627 pinctrl-0 = <&i2c1_pins>;
628 pixcir_ts@5c {
629 compatible = "pixcir,pixcir_tangoc";
630 pinctrl-names = "default";
631 pinctrl-0 = <&pixcir_ts_pins>;
632 reg = <0x5c>;
634 attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
636 /*
637 * 0x264 represents the offset of padconf register of
638 * gpio3_22 from am43xx_pinmux base.
639 */
640 interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>,
641 <&am43xx_pinmux 0x264>;
642 interrupt-names = "tsc", "wakeup";
644 touchscreen-size-x = <1024>;
645 touchscreen-size-y = <600>;
646 wakeup-source;
647 };
649 ov2659@30 {
650 compatible = "ovti,ov2659";
651 reg = <0x30>;
653 clocks = <&refclk 0>;
654 clock-names = "xvclk";
656 port {
657 ov2659_1: endpoint {
658 remote-endpoint = <&vpfe0_ep>;
659 link-frequencies = /bits/ 64 <70000000>;
660 };
661 };
662 };
664 tlv320aic3106: tlv320aic3106@1b {
665 #sound-dai-cells = <0>;
666 compatible = "ti,tlv320aic3106";
667 reg = <0x1b>;
668 status = "okay";
670 /* Regulators */
671 IOVDD-supply = <&evm_v3_3d>; /* V3_3D -> <tps63031> EN: V1_8D -> VBAT */
672 AVDD-supply = <&evm_v3_3d>; /* v3_3AUD -> V3_3D -> ... */
673 DRVDD-supply = <&evm_v3_3d>; /* v3_3AUD -> V3_3D -> ... */
674 DVDD-supply = <&ldo1>; /* V1_8D -> LDO1 */
675 };
676 };
678 &epwmss0 {
679 status = "okay";
680 };
682 &tscadc {
683 status = "okay";
685 adc {
686 ti,adc-channels = <0 1 2 3 4 5 6 7>;
687 };
688 };
690 &ecap0 {
691 status = "okay";
692 pinctrl-names = "default";
693 pinctrl-0 = <&ecap0_pins>;
694 };
696 &gpio0 {
697 pinctrl-names = "default";
698 pinctrl-0 = <&gpio0_pins>;
699 status = "okay";
701 p23 {
702 gpio-hog;
703 gpios = <23 GPIO_ACTIVE_HIGH>;
704 /* SelEMMCorNAND selects between eMMC and NAND:
705 * Low: NAND
706 * High: eMMC
707 * When changing this line make sure the newly
708 * selected device node is enabled and the previously
709 * selected device node is disabled.
710 */
711 output-low;
712 line-name = "SelEMMCorNAND";
713 };
714 };
716 &gpio1 {
717 status = "okay";
718 };
720 &gpio3 {
721 status = "okay";
722 };
724 &gpio4 {
725 status = "okay";
726 };
728 &gpio5 {
729 pinctrl-names = "default";
730 pinctrl-0 = <&display_mux_pins>;
731 status = "okay";
732 ti,no-reset-on-init;
734 p8 {
735 /*
736 * SelLCDorHDMI selects between display and audio paths:
737 * Low: HDMI display with audio via HDMI
738 * High: LCD display with analog audio via aic3111 codec
739 */
740 gpio-hog;
741 gpios = <8 GPIO_ACTIVE_HIGH>;
742 output-high;
743 line-name = "SelLCDorHDMI";
744 };
745 };
747 &mmc1 {
748 status = "okay";
749 vmmc-supply = <&evm_v3_3d>;
750 bus-width = <4>;
751 pinctrl-names = "default";
752 pinctrl-0 = <&mmc1_pins>;
753 cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
754 };
756 /* eMMC sits on mmc2 */
757 &mmc2 {
758 /*
759 * When enabling eMMC, disable GPMC/NAND and set
760 * SelEMMCorNAND to output-high
761 */
762 status = "disabled";
763 vmmc-supply = <&evm_v3_3d>;
764 bus-width = <8>;
765 pinctrl-names = "default", "sleep";
766 pinctrl-0 = <&emmc_pins_default>;
767 pinctrl-1 = <&emmc_pins_sleep>;
768 ti,non-removable;
769 };
771 &mmc3 {
772 status = "okay";
773 /* these are on the crossbar and are outlined in the
774 xbar-event-map element */
775 dmas = <&edma_xbar 30 0 1>,
776 <&edma_xbar 31 0 2>;
777 dma-names = "tx", "rx";
778 vmmc-supply = <&vmmcwl_fixed>;
779 bus-width = <4>;
780 pinctrl-names = "default", "sleep";
781 pinctrl-0 = <&mmc3_pins_default>;
782 pinctrl-1 = <&mmc3_pins_sleep>;
783 cap-power-off-card;
784 keep-power-in-suspend;
785 ti,non-removable;
787 #address-cells = <1>;
788 #size-cells = <0>;
789 wlcore: wlcore@0 {
790 compatible = "ti,wl1835";
791 reg = <2>;
792 interrupt-parent = <&gpio1>;
793 interrupts = <23 IRQ_TYPE_EDGE_RISING>;
794 };
795 };
797 &uart3 {
798 status = "okay";
799 pinctrl-names = "default";
800 pinctrl-0 = <&uart3_pins>;
801 };
803 &usb2_phy1 {
804 status = "okay";
805 };
807 &usb1 {
808 dr_mode = "otg";
809 status = "okay";
810 };
812 &usb2_phy2 {
813 status = "okay";
814 };
816 &usb2 {
817 dr_mode = "host";
818 status = "okay";
819 };
821 &mac {
822 slaves = <1>;
823 pinctrl-names = "default", "sleep";
824 pinctrl-0 = <&cpsw_default>;
825 pinctrl-1 = <&cpsw_sleep>;
826 status = "okay";
827 };
829 &davinci_mdio {
830 pinctrl-names = "default", "sleep";
831 pinctrl-0 = <&davinci_mdio_default>;
832 pinctrl-1 = <&davinci_mdio_sleep>;
833 status = "okay";
834 };
836 &cpsw_emac0 {
837 phy_id = <&davinci_mdio>, <0>;
838 phy-mode = "rgmii";
839 };
841 &elm {
842 status = "okay";
843 };
845 &gpmc {
846 /*
847 * When enabling GPMC, disable eMMC and set
848 * SelEMMCorNAND to output-low
849 */
850 status = "okay";
851 pinctrl-names = "default";
852 pinctrl-0 = <&nand_flash_x8>;
853 ranges = <0 0 0x08000000 0x01000000>; /* CS0 space. Min partition = 16MB */
854 nand@0,0 {
855 compatible = "ti,omap2-nand";
856 reg = <0 0 4>; /* device IO registers */
857 interrupt-parent = <&gpmc>;
858 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
859 <1 IRQ_TYPE_NONE>; /* termcount */
860 rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
861 ti,nand-xfer-type = "prefetch-dma";
862 ti,nand-ecc-opt = "bch16";
863 ti,elm-id = <&elm>;
864 nand-bus-width = <8>;
865 gpmc,device-width = <1>;
866 gpmc,sync-clk-ps = <0>;
867 gpmc,cs-on-ns = <0>;
868 gpmc,cs-rd-off-ns = <40>;
869 gpmc,cs-wr-off-ns = <40>;
870 gpmc,adv-on-ns = <0>;
871 gpmc,adv-rd-off-ns = <25>;
872 gpmc,adv-wr-off-ns = <25>;
873 gpmc,we-on-ns = <0>;
874 gpmc,we-off-ns = <20>;
875 gpmc,oe-on-ns = <3>;
876 gpmc,oe-off-ns = <30>;
877 gpmc,access-ns = <30>;
878 gpmc,rd-cycle-ns = <40>;
879 gpmc,wr-cycle-ns = <40>;
880 gpmc,bus-turnaround-ns = <0>;
881 gpmc,cycle2cycle-delay-ns = <0>;
882 gpmc,clk-activation-ns = <0>;
883 gpmc,wr-access-ns = <40>;
884 gpmc,wr-data-mux-bus-ns = <0>;
885 /* MTD partition table */
886 /* All SPL-* partitions are sized to minimal length
887 * which can be independently programmable. For
888 * NAND flash this is equal to size of erase-block */
889 #address-cells = <1>;
890 #size-cells = <1>;
891 partition@0 {
892 label = "NAND.SPL";
893 reg = <0x00000000 0x00040000>;
894 };
895 partition@1 {
896 label = "NAND.SPL.backup1";
897 reg = <0x00040000 0x00040000>;
898 };
899 partition@2 {
900 label = "NAND.SPL.backup2";
901 reg = <0x00080000 0x00040000>;
902 };
903 partition@3 {
904 label = "NAND.SPL.backup3";
905 reg = <0x000c0000 0x00040000>;
906 };
907 partition@4 {
908 label = "NAND.u-boot-spl-os";
909 reg = <0x00100000 0x00080000>;
910 };
911 partition@5 {
912 label = "NAND.u-boot";
913 reg = <0x00180000 0x00100000>;
914 };
915 partition@6 {
916 label = "NAND.u-boot-env";
917 reg = <0x00280000 0x00040000>;
918 };
919 partition@7 {
920 label = "NAND.u-boot-env.backup1";
921 reg = <0x002c0000 0x00040000>;
922 };
923 partition@8 {
924 label = "NAND.kernel";
925 reg = <0x00300000 0x00700000>;
926 };
927 partition@9 {
928 label = "NAND.file-system";
929 reg = <0x00a00000 0x1f600000>;
930 };
931 };
932 };
934 &dss {
935 status = "ok";
937 pinctrl-names = "default";
938 pinctrl-0 = <&dss_pins>;
940 port {
941 dpi_out: endpoint {
942 remote-endpoint = <&lcd_in>;
943 data-lines = <24>;
944 };
945 };
946 };
948 &dcan0 {
949 pinctrl-names = "default", "sleep";
950 pinctrl-0 = <&dcan0_default>;
951 pinctrl-1 = <&dcan0_sleep>;
952 status = "okay";
953 };
955 &dcan1 {
956 pinctrl-names = "default", "sleep";
957 pinctrl-0 = <&dcan1_default>;
958 pinctrl-1 = <&dcan1_sleep>;
959 status = "okay";
960 };
962 &vpfe0 {
963 status = "okay";
964 pinctrl-names = "default", "sleep";
965 pinctrl-0 = <&vpfe0_pins_default>;
966 pinctrl-1 = <&vpfe0_pins_sleep>;
968 port {
969 vpfe0_ep: endpoint {
970 remote-endpoint = <&ov2659_1>;
971 ti,am437x-vpfe-interface = <0>;
972 bus-width = <8>;
973 hsync-active = <0>;
974 vsync-active = <0>;
975 };
976 };
977 };
979 &vpfe1 {
980 status = "okay";
981 pinctrl-names = "default", "sleep";
982 pinctrl-0 = <&vpfe1_pins_default>;
983 pinctrl-1 = <&vpfe1_pins_sleep>;
985 port {
986 vpfe1_ep: endpoint {
987 remote-endpoint = <&ov2659_0>;
988 ti,am437x-vpfe-interface = <0>;
989 bus-width = <8>;
990 hsync-active = <0>;
991 vsync-active = <0>;
992 };
993 };
994 };
996 &mcasp1 {
997 #sound-dai-cells = <0>;
998 pinctrl-names = "default", "sleep";
999 pinctrl-0 = <&mcasp1_pins>;
1000 pinctrl-1 = <&mcasp1_sleep_pins>;
1002 status = "okay";
1004 op-mode = <0>; /* MCASP_IIS_MODE */
1005 tdm-slots = <2>;
1006 /* 4 serializers */
1007 serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
1008 0 0 1 2
1009 >;
1010 tx-num-evt = <32>;
1011 rx-num-evt = <32>;
1012 };
1014 &rtc {
1015 clocks = <&clk_32k_rtc>, <&clk_32768_ck>;
1016 clock-names = "ext-clk", "int-clk";
1017 status = "okay";
1018 };
1020 &cpu {
1021 cpu0-supply = <&dcdc2>;
1022 };