drivers/usb/serial/ti_usb_3410_5052.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * TI 3410/5052 USB Serial Driver
   4  *
   5  * Copyright (C) 2004 Texas Instruments
   6  *
   7  * This driver is based on the Linux io_ti driver, which is
   8  *   Copyright (C) 2000-2002 Inside Out Networks
   9  *   Copyright (C) 2001-2002 Greg Kroah-Hartman
  10  *
  11  * For questions or problems with this driver, contact Texas Instruments
  12  * technical support, or Al Borchers <alborchers@steinerpoint.com>, or
  13  * Peter Berger <pberger@brimson.com>.
  14  */
  15
  16 #include <linux/kernel.h>
  17 #include <linux/errno.h>
  18 #include <linux/firmware.h>
  19 #include <linux/slab.h>
  20 #include <linux/tty.h>
  21 #include <linux/tty_driver.h>
  22 #include <linux/tty_flip.h>
  23 #include <linux/module.h>
  24 #include <linux/spinlock.h>
  25 #include <linux/ioctl.h>
  26 #include <linux/serial.h>
  27 #include <linux/kfifo.h>
  28 #include <linux/mutex.h>
  29 #include <linux/uaccess.h>
  30 #include <linux/usb.h>
  31 #include <linux/usb/serial.h>
  32
  33 /* Configuration ids */
  34 #define TI_BOOT_CONFIG                  1
  35 #define TI_ACTIVE_CONFIG                2
  36
  37 /* Vendor and product ids */
  38 #define TI_VENDOR_ID                    0x0451
  39 #define IBM_VENDOR_ID                   0x04b3
  40 #define TI_3410_PRODUCT_ID              0x3410
  41 #define IBM_4543_PRODUCT_ID             0x4543
  42 #define IBM_454B_PRODUCT_ID             0x454b
  43 #define IBM_454C_PRODUCT_ID             0x454c
  44 #define TI_3410_EZ430_ID                0xF430  /* TI ez430 development tool */
  45 #define TI_5052_BOOT_PRODUCT_ID         0x5052  /* no EEPROM, no firmware */
  46 #define TI_5152_BOOT_PRODUCT_ID         0x5152  /* no EEPROM, no firmware */
  47 #define TI_5052_EEPROM_PRODUCT_ID       0x505A  /* EEPROM, no firmware */
  48 #define TI_5052_FIRMWARE_PRODUCT_ID     0x505F  /* firmware is running */
  49 #define FRI2_PRODUCT_ID                 0x5053  /* Fish River Island II */
  50
  51 /* Multi-Tech vendor and product ids */
  52 #define MTS_VENDOR_ID                   0x06E0
  53 #define MTS_GSM_NO_FW_PRODUCT_ID        0xF108
  54 #define MTS_CDMA_NO_FW_PRODUCT_ID       0xF109
  55 #define MTS_CDMA_PRODUCT_ID             0xF110
  56 #define MTS_GSM_PRODUCT_ID              0xF111
  57 #define MTS_EDGE_PRODUCT_ID             0xF112
  58 #define MTS_MT9234MU_PRODUCT_ID         0xF114
  59 #define MTS_MT9234ZBA_PRODUCT_ID        0xF115
  60 #define MTS_MT9234ZBAOLD_PRODUCT_ID     0x0319
  61
  62 /* Abbott Diabetics vendor and product ids */
  63 #define ABBOTT_VENDOR_ID                0x1a61
  64 #define ABBOTT_STEREO_PLUG_ID           0x3410
  65 #define ABBOTT_PRODUCT_ID               ABBOTT_STEREO_PLUG_ID
  66 #define ABBOTT_STRIP_PORT_ID            0x3420
  67
  68 /* Honeywell vendor and product IDs */
  69 #define HONEYWELL_VENDOR_ID             0x10ac
  70 #define HONEYWELL_HGI80_PRODUCT_ID      0x0102  /* Honeywell HGI80 */
  71
  72 /* Moxa UPORT 11x0 vendor and product IDs */
  73 #define MXU1_VENDOR_ID                          0x110a
  74 #define MXU1_1110_PRODUCT_ID                    0x1110
  75 #define MXU1_1130_PRODUCT_ID                    0x1130
  76 #define MXU1_1150_PRODUCT_ID                    0x1150
  77 #define MXU1_1151_PRODUCT_ID                    0x1151
  78 #define MXU1_1131_PRODUCT_ID                    0x1131
  79
  80 /* Commands */
  81 #define TI_GET_VERSION                  0x01
  82 #define TI_GET_PORT_STATUS              0x02
  83 #define TI_GET_PORT_DEV_INFO            0x03
  84 #define TI_GET_CONFIG                   0x04
  85 #define TI_SET_CONFIG                   0x05
  86 #define TI_OPEN_PORT                    0x06
  87 #define TI_CLOSE_PORT                   0x07
  88 #define TI_START_PORT                   0x08
  89 #define TI_STOP_PORT                    0x09
  90 #define TI_TEST_PORT                    0x0A
  91 #define TI_PURGE_PORT                   0x0B
  92 #define TI_RESET_EXT_DEVICE             0x0C
  93 #define TI_WRITE_DATA                   0x80
  94 #define TI_READ_DATA                    0x81
  95 #define TI_REQ_TYPE_CLASS               0x82
  96
  97 /* Module identifiers */
  98 #define TI_I2C_PORT                     0x01
  99 #define TI_IEEE1284_PORT                0x02
 100 #define TI_UART1_PORT                   0x03
 101 #define TI_UART2_PORT                   0x04
 102 #define TI_RAM_PORT                     0x05
 103
 104 /* Modem status */
 105 #define TI_MSR_DELTA_CTS                0x01
 106 #define TI_MSR_DELTA_DSR                0x02
 107 #define TI_MSR_DELTA_RI                 0x04
 108 #define TI_MSR_DELTA_CD                 0x08
 109 #define TI_MSR_CTS                      0x10
 110 #define TI_MSR_DSR                      0x20
 111 #define TI_MSR_RI                       0x40
 112 #define TI_MSR_CD                       0x80
 113 #define TI_MSR_DELTA_MASK               0x0F
 114 #define TI_MSR_MASK                     0xF0
 115
 116 /* Line status */
 117 #define TI_LSR_OVERRUN_ERROR            0x01
 118 #define TI_LSR_PARITY_ERROR             0x02
 119 #define TI_LSR_FRAMING_ERROR            0x04
 120 #define TI_LSR_BREAK                    0x08
 121 #define TI_LSR_ERROR                    0x0F
 122 #define TI_LSR_RX_FULL                  0x10
 123 #define TI_LSR_TX_EMPTY                 0x20
 124
 125 /* Line control */
 126 #define TI_LCR_BREAK                    0x40
 127
 128 /* Modem control */
 129 #define TI_MCR_LOOP                     0x04
 130 #define TI_MCR_DTR                      0x10
 131 #define TI_MCR_RTS                      0x20
 132
 133 /* Mask settings */
 134 #define TI_UART_ENABLE_RTS_IN           0x0001
 135 #define TI_UART_DISABLE_RTS             0x0002
 136 #define TI_UART_ENABLE_PARITY_CHECKING  0x0008
 137 #define TI_UART_ENABLE_DSR_OUT          0x0010
 138 #define TI_UART_ENABLE_CTS_OUT          0x0020
 139 #define TI_UART_ENABLE_X_OUT            0x0040
 140 #define TI_UART_ENABLE_XA_OUT           0x0080
 141 #define TI_UART_ENABLE_X_IN             0x0100
 142 #define TI_UART_ENABLE_DTR_IN           0x0800
 143 #define TI_UART_DISABLE_DTR             0x1000
 144 #define TI_UART_ENABLE_MS_INTS          0x2000
 145 #define TI_UART_ENABLE_AUTO_START_DMA   0x4000
 146
 147 /* Parity */
 148 #define TI_UART_NO_PARITY               0x00
 149 #define TI_UART_ODD_PARITY              0x01
 150 #define TI_UART_EVEN_PARITY             0x02
 151 #define TI_UART_MARK_PARITY             0x03
 152 #define TI_UART_SPACE_PARITY            0x04
 153
 154 /* Stop bits */
 155 #define TI_UART_1_STOP_BITS             0x00
 156 #define TI_UART_1_5_STOP_BITS           0x01
 157 #define TI_UART_2_STOP_BITS             0x02
 158
 159 /* Bits per character */
 160 #define TI_UART_5_DATA_BITS             0x00
 161 #define TI_UART_6_DATA_BITS             0x01
 162 #define TI_UART_7_DATA_BITS             0x02
 163 #define TI_UART_8_DATA_BITS             0x03
 164
 165 /* 232/485 modes */
 166 #define TI_UART_232                     0x00
 167 #define TI_UART_485_RECEIVER_DISABLED   0x01
 168 #define TI_UART_485_RECEIVER_ENABLED    0x02
 169
 170 /* Pipe transfer mode and timeout */
 171 #define TI_PIPE_MODE_CONTINUOUS         0x01
 172 #define TI_PIPE_MODE_MASK               0x03
 173 #define TI_PIPE_TIMEOUT_MASK            0x7C
 174 #define TI_PIPE_TIMEOUT_ENABLE          0x80
 175
 176 /* Config struct */
 177 struct ti_uart_config {
 178         __be16  wBaudRate;
 179         __be16  wFlags;
 180         u8      bDataBits;
 181         u8      bParity;
 182         u8      bStopBits;
 183         char    cXon;
 184         char    cXoff;
 185         u8      bUartMode;
 186 } __packed;
 187
 188 /* Get port status */
 189 struct ti_port_status {
 190         u8 bCmdCode;
 191         u8 bModuleId;
 192         u8 bErrorCode;
 193         u8 bMSR;
 194         u8 bLSR;
 195 } __packed;
 196
 197 /* Purge modes */
 198 #define TI_PURGE_OUTPUT                 0x00
 199 #define TI_PURGE_INPUT                  0x80
 200
 201 /* Read/Write data */
 202 #define TI_RW_DATA_ADDR_SFR             0x10
 203 #define TI_RW_DATA_ADDR_IDATA           0x20
 204 #define TI_RW_DATA_ADDR_XDATA           0x30
 205 #define TI_RW_DATA_ADDR_CODE            0x40
 206 #define TI_RW_DATA_ADDR_GPIO            0x50
 207 #define TI_RW_DATA_ADDR_I2C             0x60
 208 #define TI_RW_DATA_ADDR_FLASH           0x70
 209 #define TI_RW_DATA_ADDR_DSP             0x80
 210
 211 #define TI_RW_DATA_UNSPECIFIED          0x00
 212 #define TI_RW_DATA_BYTE                 0x01
 213 #define TI_RW_DATA_WORD                 0x02
 214 #define TI_RW_DATA_DOUBLE_WORD          0x04
 215
 216 struct ti_write_data_bytes {
 217         u8      bAddrType;
 218         u8      bDataType;
 219         u8      bDataCounter;
 220         __be16  wBaseAddrHi;
 221         __be16  wBaseAddrLo;
 222         u8      bData[0];
 223 } __packed;
 224
 225 struct ti_read_data_request {
 226         __u8    bAddrType;
 227         __u8    bDataType;
 228         __u8    bDataCounter;
 229         __be16  wBaseAddrHi;
 230         __be16  wBaseAddrLo;
 231 } __packed;
 232
 233 struct ti_read_data_bytes {
 234         __u8    bCmdCode;
 235         __u8    bModuleId;
 236         __u8    bErrorCode;
 237         __u8    bData[0];
 238 } __packed;
 239
 240 /* Interrupt struct */
 241 struct ti_interrupt {
 242         __u8    bICode;
 243         __u8    bIInfo;
 244 } __packed;
 245
 246 /* Interrupt codes */
 247 #define TI_CODE_HARDWARE_ERROR          0xFF
 248 #define TI_CODE_DATA_ERROR              0x03
 249 #define TI_CODE_MODEM_STATUS            0x04
 250
 251 /* Download firmware max packet size */
 252 #define TI_DOWNLOAD_MAX_PACKET_SIZE     64
 253
 254 /* Firmware image header */
 255 struct ti_firmware_header {
 256         __le16  wLength;
 257         u8      bCheckSum;
 258 } __packed;
 259
 260 /* UART addresses */
 261 #define TI_UART1_BASE_ADDR              0xFFA0  /* UART 1 base address */
 262 #define TI_UART2_BASE_ADDR              0xFFB0  /* UART 2 base address */
 263 #define TI_UART_OFFSET_LCR              0x0002  /* UART MCR register offset */
 264 #define TI_UART_OFFSET_MCR              0x0004  /* UART MCR register offset */
 265
 266 #define TI_DRIVER_AUTHOR        "Al Borchers <alborchers@steinerpoint.com>"
 267 #define TI_DRIVER_DESC          "TI USB 3410/5052 Serial Driver"
 268
 269 #define TI_FIRMWARE_BUF_SIZE    16284
 270
 271 #define TI_TRANSFER_TIMEOUT     2
 272
 273 #define TI_DEFAULT_CLOSING_WAIT 4000            /* in .01 secs */
 274
 275 /* read urb states */
 276 #define TI_READ_URB_RUNNING     0
 277 #define TI_READ_URB_STOPPING    1
 278 #define TI_READ_URB_STOPPED     2
 279
 280 #define TI_EXTRA_VID_PID_COUNT  5
 281
 282 struct ti_port {
 283         int                     tp_is_open;
 284         u8                      tp_msr;
 285         u8                      tp_shadow_mcr;
 286         u8                      tp_uart_mode;   /* 232 or 485 modes */
 287         unsigned int            tp_uart_base_addr;
 288         struct ti_device        *tp_tdev;
 289         struct usb_serial_port  *tp_port;
 290         spinlock_t              tp_lock;
 291         int                     tp_read_urb_state;
 292         int                     tp_write_urb_in_use;
 293 };
 294
 295 struct ti_device {
 296         struct mutex            td_open_close_lock;
 297         int                     td_open_port_count;
 298         struct usb_serial       *td_serial;
 299         int                     td_is_3410;
 300         bool                    td_rs485_only;
 301 };
 302
 303 static int ti_startup(struct usb_serial *serial);
 304 static void ti_release(struct usb_serial *serial);
 305 static int ti_port_probe(struct usb_serial_port *port);
 306 static int ti_port_remove(struct usb_serial_port *port);
 307 static int ti_open(struct tty_struct *tty, struct usb_serial_port *port);
 308 static void ti_close(struct usb_serial_port *port);
 309 static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
 310                 const unsigned char *data, int count);
 311 static int ti_write_room(struct tty_struct *tty);
 312 static int ti_chars_in_buffer(struct tty_struct *tty);
 313 static bool ti_tx_empty(struct usb_serial_port *port);
 314 static void ti_throttle(struct tty_struct *tty);
 315 static void ti_unthrottle(struct tty_struct *tty);
 316 static int ti_ioctl(struct tty_struct *tty,
 317                 unsigned int cmd, unsigned long arg);
 318 static void ti_set_termios(struct tty_struct *tty,
 319                 struct usb_serial_port *port, struct ktermios *old_termios);
 320 static int ti_tiocmget(struct tty_struct *tty);
 321 static int ti_tiocmset(struct tty_struct *tty,
 322                 unsigned int set, unsigned int clear);
 323 static void ti_break(struct tty_struct *tty, int break_state);
 324 static void ti_interrupt_callback(struct urb *urb);
 325 static void ti_bulk_in_callback(struct urb *urb);
 326 static void ti_bulk_out_callback(struct urb *urb);
 327
 328 static void ti_recv(struct usb_serial_port *port, unsigned char *data,
 329                 int length);
 330 static void ti_send(struct ti_port *tport);
 331 static int ti_set_mcr(struct ti_port *tport, unsigned int mcr);
 332 static int ti_get_lsr(struct ti_port *tport, u8 *lsr);
 333 static int ti_get_serial_info(struct ti_port *tport,
 334         struct serial_struct __user *ret_arg);
 335 static int ti_set_serial_info(struct tty_struct *tty, struct ti_port *tport,
 336         struct serial_struct __user *new_arg);
 337 static void ti_handle_new_msr(struct ti_port *tport, u8 msr);
 338
 339 static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty);
 340 static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty);
 341
 342 static int ti_command_out_sync(struct ti_device *tdev, __u8 command,
 343         __u16 moduleid, __u16 value, __u8 *data, int size);
 344 static int ti_command_in_sync(struct ti_device *tdev, __u8 command,
 345         __u16 moduleid, __u16 value, __u8 *data, int size);
 346
 347 static int ti_write_byte(struct usb_serial_port *port, struct ti_device *tdev,
 348                          unsigned long addr, u8 mask, u8 byte);
 349
 350 static int ti_download_firmware(struct ti_device *tdev);
 351
 352 static int closing_wait = TI_DEFAULT_CLOSING_WAIT;
 353
 354 static const struct usb_device_id ti_id_table_3410[] = {
 355         { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
 356         { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
 357         { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
 358         { USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_NO_FW_PRODUCT_ID) },
 359         { USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) },
 360         { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) },
 361         { USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) },
 362         { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234MU_PRODUCT_ID) },
 363         { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBA_PRODUCT_ID) },
 364         { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBAOLD_PRODUCT_ID) },
 365         { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
 366         { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
 367         { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
 368         { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STEREO_PLUG_ID) },
 369         { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STRIP_PORT_ID) },
 370         { USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) },
 371         { USB_DEVICE(HONEYWELL_VENDOR_ID, HONEYWELL_HGI80_PRODUCT_ID) },
 372         { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1110_PRODUCT_ID) },
 373         { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1130_PRODUCT_ID) },
 374         { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1131_PRODUCT_ID) },
 375         { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1150_PRODUCT_ID) },
 376         { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1151_PRODUCT_ID) },
 377         { }     /* terminator */
 378 };
 379
 380 static const struct usb_device_id ti_id_table_5052[] = {
 381         { USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) },
 382         { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
 383         { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
 384         { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
 385         { }
 386 };
 387
 388 static const struct usb_device_id ti_id_table_combined[] = {
 389         { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
 390         { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
 391         { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
 392         { USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_NO_FW_PRODUCT_ID) },
 393         { USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) },
 394         { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) },
 395         { USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) },
 396         { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234MU_PRODUCT_ID) },
 397         { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBA_PRODUCT_ID) },
 398         { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBAOLD_PRODUCT_ID) },
 399         { USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) },
 400         { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
 401         { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
 402         { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
 403         { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
 404         { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
 405         { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
 406         { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) },
 407         { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STRIP_PORT_ID) },
 408         { USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) },
 409         { USB_DEVICE(HONEYWELL_VENDOR_ID, HONEYWELL_HGI80_PRODUCT_ID) },
 410         { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1110_PRODUCT_ID) },
 411         { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1130_PRODUCT_ID) },
 412         { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1131_PRODUCT_ID) },
 413         { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1150_PRODUCT_ID) },
 414         { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1151_PRODUCT_ID) },
 415         { }     /* terminator */
 416 };
 417
 418 static struct usb_serial_driver ti_1port_device = {
 419         .driver = {
 420                 .owner          = THIS_MODULE,
 421                 .name           = "ti_usb_3410_5052_1",
 422         },
 423         .description            = "TI USB 3410 1 port adapter",
 424         .id_table               = ti_id_table_3410,
 425         .num_ports              = 1,
 426         .num_bulk_out           = 1,
 427         .attach                 = ti_startup,
 428         .release                = ti_release,
 429         .port_probe             = ti_port_probe,
 430         .port_remove            = ti_port_remove,
 431         .open                   = ti_open,
 432         .close                  = ti_close,
 433         .write                  = ti_write,
 434         .write_room             = ti_write_room,
 435         .chars_in_buffer        = ti_chars_in_buffer,
 436         .tx_empty               = ti_tx_empty,
 437         .throttle               = ti_throttle,
 438         .unthrottle             = ti_unthrottle,
 439         .ioctl                  = ti_ioctl,
 440         .set_termios            = ti_set_termios,
 441         .tiocmget               = ti_tiocmget,
 442         .tiocmset               = ti_tiocmset,
 443         .tiocmiwait             = usb_serial_generic_tiocmiwait,
 444         .get_icount             = usb_serial_generic_get_icount,
 445         .break_ctl              = ti_break,
 446         .read_int_callback      = ti_interrupt_callback,
 447         .read_bulk_callback     = ti_bulk_in_callback,
 448         .write_bulk_callback    = ti_bulk_out_callback,
 449 };
 450
 451 static struct usb_serial_driver ti_2port_device = {
 452         .driver = {
 453                 .owner          = THIS_MODULE,
 454                 .name           = "ti_usb_3410_5052_2",
 455         },
 456         .description            = "TI USB 5052 2 port adapter",
 457         .id_table               = ti_id_table_5052,
 458         .num_ports              = 2,
 459         .num_bulk_out           = 1,
 460         .attach                 = ti_startup,
 461         .release                = ti_release,
 462         .port_probe             = ti_port_probe,
 463         .port_remove            = ti_port_remove,
 464         .open                   = ti_open,
 465         .close                  = ti_close,
 466         .write                  = ti_write,
 467         .write_room             = ti_write_room,
 468         .chars_in_buffer        = ti_chars_in_buffer,
 469         .tx_empty               = ti_tx_empty,
 470         .throttle               = ti_throttle,
 471         .unthrottle             = ti_unthrottle,
 472         .ioctl                  = ti_ioctl,
 473         .set_termios            = ti_set_termios,
 474         .tiocmget               = ti_tiocmget,
 475         .tiocmset               = ti_tiocmset,
 476         .tiocmiwait             = usb_serial_generic_tiocmiwait,
 477         .get_icount             = usb_serial_generic_get_icount,
 478         .break_ctl              = ti_break,
 479         .read_int_callback      = ti_interrupt_callback,
 480         .read_bulk_callback     = ti_bulk_in_callback,
 481         .write_bulk_callback    = ti_bulk_out_callback,
 482 };
 483
 484 static struct usb_serial_driver * const serial_drivers[] = {
 485         &ti_1port_device, &ti_2port_device, NULL
 486 };
 487
 488 MODULE_AUTHOR(TI_DRIVER_AUTHOR);
 489 MODULE_DESCRIPTION(TI_DRIVER_DESC);
 490 MODULE_LICENSE("GPL");
 491
 492 MODULE_FIRMWARE("ti_3410.fw");
 493 MODULE_FIRMWARE("ti_5052.fw");
 494 MODULE_FIRMWARE("mts_cdma.fw");
 495 MODULE_FIRMWARE("mts_gsm.fw");
 496 MODULE_FIRMWARE("mts_edge.fw");
 497 MODULE_FIRMWARE("mts_mt9234mu.fw");
 498 MODULE_FIRMWARE("mts_mt9234zba.fw");
 499 MODULE_FIRMWARE("moxa/moxa-1110.fw");
 500 MODULE_FIRMWARE("moxa/moxa-1130.fw");
 501 MODULE_FIRMWARE("moxa/moxa-1131.fw");
 502 MODULE_FIRMWARE("moxa/moxa-1150.fw");
 503 MODULE_FIRMWARE("moxa/moxa-1151.fw");
 504
 505 module_param(closing_wait, int, S_IRUGO | S_IWUSR);
 506 MODULE_PARM_DESC(closing_wait,
 507     "Maximum wait for data to drain in close, in .01 secs, default is 4000");
 508
 509 MODULE_DEVICE_TABLE(usb, ti_id_table_combined);
 510
 511 module_usb_serial_driver(serial_drivers, ti_id_table_combined);
 512
 513 static int ti_startup(struct usb_serial *serial)
 514 {
 515         struct ti_device *tdev;
 516         struct usb_device *dev = serial->dev;
 517         struct usb_host_interface *cur_altsetting;
 518         int num_endpoints;
 519         u16 vid, pid;
 520         int status;
 521
 522         dev_dbg(&dev->dev,
 523                 "%s - product 0x%4X, num configurations %d, configuration value %d\n",
 524                 __func__, le16_to_cpu(dev->descriptor.idProduct),
 525                 dev->descriptor.bNumConfigurations,
 526                 dev->actconfig->desc.bConfigurationValue);
 527
 528         tdev = kzalloc(sizeof(struct ti_device), GFP_KERNEL);
 529         if (!tdev)
 530                 return -ENOMEM;
 531
 532         mutex_init(&tdev->td_open_close_lock);
 533         tdev->td_serial = serial;
 534         usb_set_serial_data(serial, tdev);
 535
 536         /* determine device type */
 537         if (serial->type == &ti_1port_device)
 538                 tdev->td_is_3410 = 1;
 539         dev_dbg(&dev->dev, "%s - device type is %s\n", __func__,
 540                 tdev->td_is_3410 ? "3410" : "5052");
 541
 542         vid = le16_to_cpu(dev->descriptor.idVendor);
 543         pid = le16_to_cpu(dev->descriptor.idProduct);
 544         if (vid == MXU1_VENDOR_ID) {
 545                 switch (pid) {
 546                 case MXU1_1130_PRODUCT_ID:
 547                 case MXU1_1131_PRODUCT_ID:
 548                         tdev->td_rs485_only = true;
 549                         break;
 550                 }
 551         }
 552
 553         cur_altsetting = serial->interface->cur_altsetting;
 554         num_endpoints = cur_altsetting->desc.bNumEndpoints;
 555
 556         /* if we have only 1 configuration and 1 endpoint, download firmware */
 557         if (dev->descriptor.bNumConfigurations == 1 && num_endpoints == 1) {
 558                 status = ti_download_firmware(tdev);
 559
 560                 if (status != 0)
 561                         goto free_tdev;
 562
 563                 /* 3410 must be reset, 5052 resets itself */
 564                 if (tdev->td_is_3410) {
 565                         msleep_interruptible(100);
 566                         usb_reset_device(dev);
 567                 }
 568
 569                 status = -ENODEV;
 570                 goto free_tdev;
 571         }
 572
 573         /* the second configuration must be set */
 574         if (dev->actconfig->desc.bConfigurationValue == TI_BOOT_CONFIG) {
 575                 status = usb_driver_set_configuration(dev, TI_ACTIVE_CONFIG);
 576                 status = status ? status : -ENODEV;
 577                 goto free_tdev;
 578         }
 579
 580         if (serial->num_bulk_in < serial->num_ports ||
 581                         serial->num_bulk_out < serial->num_ports) {
 582                 dev_err(&serial->interface->dev, "missing endpoints\n");
 583                 status = -ENODEV;
 584                 goto free_tdev;
 585         }
 586
 587         return 0;
 588
 589 free_tdev:
 590         kfree(tdev);
 591         usb_set_serial_data(serial, NULL);
 592         return status;
 593 }
 594
 595
 596 static void ti_release(struct usb_serial *serial)
 597 {
 598         struct ti_device *tdev = usb_get_serial_data(serial);
 599
 600         kfree(tdev);
 601 }
 602
 603 static int ti_port_probe(struct usb_serial_port *port)
 604 {
 605         struct ti_port *tport;
 606
 607         tport = kzalloc(sizeof(*tport), GFP_KERNEL);
 608         if (!tport)
 609                 return -ENOMEM;
 610
 611         spin_lock_init(&tport->tp_lock);
 612         if (port == port->serial->port[0])
 613                 tport->tp_uart_base_addr = TI_UART1_BASE_ADDR;
 614         else
 615                 tport->tp_uart_base_addr = TI_UART2_BASE_ADDR;
 616         port->port.closing_wait = msecs_to_jiffies(10 * closing_wait);
 617         tport->tp_port = port;
 618         tport->tp_tdev = usb_get_serial_data(port->serial);
 619
 620         if (tport->tp_tdev->td_rs485_only)
 621                 tport->tp_uart_mode = TI_UART_485_RECEIVER_DISABLED;
 622         else
 623                 tport->tp_uart_mode = TI_UART_232;
 624
 625         usb_set_serial_port_data(port, tport);
 626
 627         port->port.drain_delay = 3;
 628
 629         return 0;
 630 }
 631
 632 static int ti_port_remove(struct usb_serial_port *port)
 633 {
 634         struct ti_port *tport;
 635
 636         tport = usb_get_serial_port_data(port);
 637         kfree(tport);
 638
 639         return 0;
 640 }
 641
 642 static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
 643 {
 644         struct ti_port *tport = usb_get_serial_port_data(port);
 645         struct ti_device *tdev;
 646         struct usb_device *dev;
 647         struct urb *urb;
 648         int port_number;
 649         int status;
 650         u16 open_settings;
 651
 652         open_settings = (TI_PIPE_MODE_CONTINUOUS |
 653                          TI_PIPE_TIMEOUT_ENABLE |
 654                          (TI_TRANSFER_TIMEOUT << 2));
 655
 656         dev = port->serial->dev;
 657         tdev = tport->tp_tdev;
 658
 659         /* only one open on any port on a device at a time */
 660         if (mutex_lock_interruptible(&tdev->td_open_close_lock))
 661                 return -ERESTARTSYS;
 662
 663         port_number = port->port_number;
 664
 665         tport->tp_msr = 0;
 666         tport->tp_shadow_mcr |= (TI_MCR_RTS | TI_MCR_DTR);
 667
 668         /* start interrupt urb the first time a port is opened on this device */
 669         if (tdev->td_open_port_count == 0) {
 670                 dev_dbg(&port->dev, "%s - start interrupt in urb\n", __func__);
 671                 urb = tdev->td_serial->port[0]->interrupt_in_urb;
 672                 if (!urb) {
 673                         dev_err(&port->dev, "%s - no interrupt urb\n", __func__);
 674                         status = -EINVAL;
 675                         goto release_lock;
 676                 }
 677                 urb->context = tdev;
 678                 status = usb_submit_urb(urb, GFP_KERNEL);
 679                 if (status) {
 680                         dev_err(&port->dev, "%s - submit interrupt urb failed, %d\n", __func__, status);
 681                         goto release_lock;
 682                 }
 683         }
 684
 685         if (tty)
 686                 ti_set_termios(tty, port, &tty->termios);
 687
 688         status = ti_command_out_sync(tdev, TI_OPEN_PORT,
 689                 (__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0);
 690         if (status) {
 691                 dev_err(&port->dev, "%s - cannot send open command, %d\n",
 692                         __func__, status);
 693                 goto unlink_int_urb;
 694         }
 695
 696         status = ti_command_out_sync(tdev, TI_START_PORT,
 697                 (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
 698         if (status) {
 699                 dev_err(&port->dev, "%s - cannot send start command, %d\n",
 700                                                         __func__, status);
 701                 goto unlink_int_urb;
 702         }
 703
 704         status = ti_command_out_sync(tdev, TI_PURGE_PORT,
 705                 (__u8)(TI_UART1_PORT + port_number), TI_PURGE_INPUT, NULL, 0);
 706         if (status) {
 707                 dev_err(&port->dev, "%s - cannot clear input buffers, %d\n",
 708                                                         __func__, status);
 709                 goto unlink_int_urb;
 710         }
 711         status = ti_command_out_sync(tdev, TI_PURGE_PORT,
 712                 (__u8)(TI_UART1_PORT + port_number), TI_PURGE_OUTPUT, NULL, 0);
 713         if (status) {
 714                 dev_err(&port->dev, "%s - cannot clear output buffers, %d\n",
 715                                                         __func__, status);
 716                 goto unlink_int_urb;
 717         }
 718
 719         /* reset the data toggle on the bulk endpoints to work around bug in
 720          * host controllers where things get out of sync some times */
 721         usb_clear_halt(dev, port->write_urb->pipe);
 722         usb_clear_halt(dev, port->read_urb->pipe);
 723
 724         if (tty)
 725                 ti_set_termios(tty, port, &tty->termios);
 726
 727         status = ti_command_out_sync(tdev, TI_OPEN_PORT,
 728                 (__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0);
 729         if (status) {
 730                 dev_err(&port->dev, "%s - cannot send open command (2), %d\n",
 731                                                         __func__, status);
 732                 goto unlink_int_urb;
 733         }
 734
 735         status = ti_command_out_sync(tdev, TI_START_PORT,
 736                 (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
 737         if (status) {
 738                 dev_err(&port->dev, "%s - cannot send start command (2), %d\n",
 739                                                         __func__, status);
 740                 goto unlink_int_urb;
 741         }
 742
 743         /* start read urb */
 744         urb = port->read_urb;
 745         if (!urb) {
 746                 dev_err(&port->dev, "%s - no read urb\n", __func__);
 747                 status = -EINVAL;
 748                 goto unlink_int_urb;
 749         }
 750         tport->tp_read_urb_state = TI_READ_URB_RUNNING;
 751         urb->context = tport;
 752         status = usb_submit_urb(urb, GFP_KERNEL);
 753         if (status) {
 754                 dev_err(&port->dev, "%s - submit read urb failed, %d\n",
 755                                                         __func__, status);
 756                 goto unlink_int_urb;
 757         }
 758
 759         tport->tp_is_open = 1;
 760         ++tdev->td_open_port_count;
 761
 762         goto release_lock;
 763
 764 unlink_int_urb:
 765         if (tdev->td_open_port_count == 0)
 766                 usb_kill_urb(port->serial->port[0]->interrupt_in_urb);
 767 release_lock:
 768         mutex_unlock(&tdev->td_open_close_lock);
 769         return status;
 770 }
 771
 772
 773 static void ti_close(struct usb_serial_port *port)
 774 {
 775         struct ti_device *tdev;
 776         struct ti_port *tport;
 777         int port_number;
 778         int status;
 779         int do_unlock;
 780         unsigned long flags;
 781
 782         tdev = usb_get_serial_data(port->serial);
 783         tport = usb_get_serial_port_data(port);
 784
 785         tport->tp_is_open = 0;
 786
 787         usb_kill_urb(port->read_urb);
 788         usb_kill_urb(port->write_urb);
 789         tport->tp_write_urb_in_use = 0;
 790         spin_lock_irqsave(&tport->tp_lock, flags);
 791         kfifo_reset_out(&port->write_fifo);
 792         spin_unlock_irqrestore(&tport->tp_lock, flags);
 793
 794         port_number = port->port_number;
 795
 796         status = ti_command_out_sync(tdev, TI_CLOSE_PORT,
 797                      (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
 798         if (status)
 799                 dev_err(&port->dev,
 800                         "%s - cannot send close port command, %d\n"
 801                                                         , __func__, status);
 802
 803         /* if mutex_lock is interrupted, continue anyway */
 804         do_unlock = !mutex_lock_interruptible(&tdev->td_open_close_lock);
 805         --tport->tp_tdev->td_open_port_count;
 806         if (tport->tp_tdev->td_open_port_count <= 0) {
 807                 /* last port is closed, shut down interrupt urb */
 808                 usb_kill_urb(port->serial->port[0]->interrupt_in_urb);
 809                 tport->tp_tdev->td_open_port_count = 0;
 810         }
 811         if (do_unlock)
 812                 mutex_unlock(&tdev->td_open_close_lock);
 813 }
 814
 815
 816 static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
 817                         const unsigned char *data, int count)
 818 {
 819         struct ti_port *tport = usb_get_serial_port_data(port);
 820
 821         if (count == 0) {
 822                 return 0;
 823         }
 824
 825         if (!tport->tp_is_open)
 826                 return -ENODEV;
 827
 828         count = kfifo_in_locked(&port->write_fifo, data, count,
 829                                                         &tport->tp_lock);
 830         ti_send(tport);
 831
 832         return count;
 833 }
 834
 835
 836 static int ti_write_room(struct tty_struct *tty)
 837 {
 838         struct usb_serial_port *port = tty->driver_data;
 839         struct ti_port *tport = usb_get_serial_port_data(port);
 840         int room = 0;
 841         unsigned long flags;
 842
 843         spin_lock_irqsave(&tport->tp_lock, flags);
 844         room = kfifo_avail(&port->write_fifo);
 845         spin_unlock_irqrestore(&tport->tp_lock, flags);
 846
 847         dev_dbg(&port->dev, "%s - returns %d\n", __func__, room);
 848         return room;
 849 }
 850
 851
 852 static int ti_chars_in_buffer(struct tty_struct *tty)
 853 {
 854         struct usb_serial_port *port = tty->driver_data;
 855         struct ti_port *tport = usb_get_serial_port_data(port);
 856         int chars = 0;
 857         unsigned long flags;
 858
 859         spin_lock_irqsave(&tport->tp_lock, flags);
 860         chars = kfifo_len(&port->write_fifo);
 861         spin_unlock_irqrestore(&tport->tp_lock, flags);
 862
 863         dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars);
 864         return chars;
 865 }
 866
 867 static bool ti_tx_empty(struct usb_serial_port *port)
 868 {
 869         struct ti_port *tport = usb_get_serial_port_data(port);
 870         int ret;
 871         u8 lsr;
 872
 873         ret = ti_get_lsr(tport, &lsr);
 874         if (!ret && !(lsr & TI_LSR_TX_EMPTY))
 875                 return false;
 876
 877         return true;
 878 }
 879
 880 static void ti_throttle(struct tty_struct *tty)
 881 {
 882         struct usb_serial_port *port = tty->driver_data;
 883         struct ti_port *tport = usb_get_serial_port_data(port);
 884
 885         if (I_IXOFF(tty) || C_CRTSCTS(tty))
 886                 ti_stop_read(tport, tty);
 887
 888 }
 889
 890
 891 static void ti_unthrottle(struct tty_struct *tty)
 892 {
 893         struct usb_serial_port *port = tty->driver_data;
 894         struct ti_port *tport = usb_get_serial_port_data(port);
 895         int status;
 896
 897         if (I_IXOFF(tty) || C_CRTSCTS(tty)) {
 898                 status = ti_restart_read(tport, tty);
 899                 if (status)
 900                         dev_err(&port->dev, "%s - cannot restart read, %d\n",
 901                                                         __func__, status);
 902         }
 903 }
 904
 905 static int ti_ioctl(struct tty_struct *tty,
 906         unsigned int cmd, unsigned long arg)
 907 {
 908         struct usb_serial_port *port = tty->driver_data;
 909         struct ti_port *tport = usb_get_serial_port_data(port);
 910
 911         switch (cmd) {
 912         case TIOCGSERIAL:
 913                 return ti_get_serial_info(tport,
 914                                 (struct serial_struct __user *)arg);
 915         case TIOCSSERIAL:
 916                 return ti_set_serial_info(tty, tport,
 917                                 (struct serial_struct __user *)arg);
 918         }
 919         return -ENOIOCTLCMD;
 920 }
 921
 922
 923 static void ti_set_termios(struct tty_struct *tty,
 924                 struct usb_serial_port *port, struct ktermios *old_termios)
 925 {
 926         struct ti_port *tport = usb_get_serial_port_data(port);
 927         struct ti_uart_config *config;
 928         int baud;
 929         int status;
 930         int port_number = port->port_number;
 931         unsigned int mcr;
 932         u16 wbaudrate;
 933         u16 wflags = 0;
 934
 935         config = kmalloc(sizeof(*config), GFP_KERNEL);
 936         if (!config)
 937                 return;
 938
 939         /* these flags must be set */
 940         wflags |= TI_UART_ENABLE_MS_INTS;
 941         wflags |= TI_UART_ENABLE_AUTO_START_DMA;
 942         config->bUartMode = tport->tp_uart_mode;
 943
 944         switch (C_CSIZE(tty)) {
 945         case CS5:
 946                     config->bDataBits = TI_UART_5_DATA_BITS;
 947                     break;
 948         case CS6:
 949                     config->bDataBits = TI_UART_6_DATA_BITS;
 950                     break;
 951         case CS7:
 952                     config->bDataBits = TI_UART_7_DATA_BITS;
 953                     break;
 954         default:
 955         case CS8:
 956                     config->bDataBits = TI_UART_8_DATA_BITS;
 957                     break;
 958         }
 959
 960         /* CMSPAR isn't supported by this driver */
 961         tty->termios.c_cflag &= ~CMSPAR;
 962
 963         if (C_PARENB(tty)) {
 964                 if (C_PARODD(tty)) {
 965                         wflags |= TI_UART_ENABLE_PARITY_CHECKING;
 966                         config->bParity = TI_UART_ODD_PARITY;
 967                 } else {
 968                         wflags |= TI_UART_ENABLE_PARITY_CHECKING;
 969                         config->bParity = TI_UART_EVEN_PARITY;
 970                 }
 971         } else {
 972                 wflags &= ~TI_UART_ENABLE_PARITY_CHECKING;
 973                 config->bParity = TI_UART_NO_PARITY;
 974         }
 975
 976         if (C_CSTOPB(tty))
 977                 config->bStopBits = TI_UART_2_STOP_BITS;
 978         else
 979                 config->bStopBits = TI_UART_1_STOP_BITS;
 980
 981         if (C_CRTSCTS(tty)) {
 982                 /* RTS flow control must be off to drop RTS for baud rate B0 */
 983                 if ((C_BAUD(tty)) != B0)
 984                         wflags |= TI_UART_ENABLE_RTS_IN;
 985                 wflags |= TI_UART_ENABLE_CTS_OUT;
 986         } else {
 987                 ti_restart_read(tport, tty);
 988         }
 989
 990         if (I_IXOFF(tty) || I_IXON(tty)) {
 991                 config->cXon  = START_CHAR(tty);
 992                 config->cXoff = STOP_CHAR(tty);
 993
 994                 if (I_IXOFF(tty))
 995                         wflags |= TI_UART_ENABLE_X_IN;
 996                 else
 997                         ti_restart_read(tport, tty);
 998
 999                 if (I_IXON(tty))
1000                         wflags |= TI_UART_ENABLE_X_OUT;
1001         }
1002
1003         baud = tty_get_baud_rate(tty);
1004         if (!baud)
1005                 baud = 9600;
1006         if (tport->tp_tdev->td_is_3410)
1007                 wbaudrate = (923077 + baud/2) / baud;
1008         else
1009                 wbaudrate = (461538 + baud/2) / baud;
1010
1011         /* FIXME: Should calculate resulting baud here and report it back */
1012         if ((C_BAUD(tty)) != B0)
1013                 tty_encode_baud_rate(tty, baud, baud);
1014
1015         dev_dbg(&port->dev,
1016                 "%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d\n",
1017                 __func__, baud, wbaudrate, wflags,
1018                 config->bDataBits, config->bParity, config->bStopBits,
1019                 config->cXon, config->cXoff, config->bUartMode);
1020
1021         config->wBaudRate = cpu_to_be16(wbaudrate);
1022         config->wFlags = cpu_to_be16(wflags);
1023
1024         status = ti_command_out_sync(tport->tp_tdev, TI_SET_CONFIG,
1025                 (__u8)(TI_UART1_PORT + port_number), 0, (__u8 *)config,
1026                 sizeof(*config));
1027         if (status)
1028                 dev_err(&port->dev, "%s - cannot set config on port %d, %d\n",
1029                                         __func__, port_number, status);
1030
1031         /* SET_CONFIG asserts RTS and DTR, reset them correctly */
1032         mcr = tport->tp_shadow_mcr;
1033         /* if baud rate is B0, clear RTS and DTR */
1034         if (C_BAUD(tty) == B0)
1035                 mcr &= ~(TI_MCR_DTR | TI_MCR_RTS);
1036         status = ti_set_mcr(tport, mcr);
1037         if (status)
1038                 dev_err(&port->dev,
1039                         "%s - cannot set modem control on port %d, %d\n",
1040                                                 __func__, port_number, status);
1041
1042         kfree(config);
1043 }
1044
1045
1046 static int ti_tiocmget(struct tty_struct *tty)
1047 {
1048         struct usb_serial_port *port = tty->driver_data;
1049         struct ti_port *tport = usb_get_serial_port_data(port);
1050         unsigned int result;
1051         unsigned int msr;
1052         unsigned int mcr;
1053         unsigned long flags;
1054
1055         spin_lock_irqsave(&tport->tp_lock, flags);
1056         msr = tport->tp_msr;
1057         mcr = tport->tp_shadow_mcr;
1058         spin_unlock_irqrestore(&tport->tp_lock, flags);
1059
1060         result = ((mcr & TI_MCR_DTR) ? TIOCM_DTR : 0)
1061                 | ((mcr & TI_MCR_RTS) ? TIOCM_RTS : 0)
1062                 | ((mcr & TI_MCR_LOOP) ? TIOCM_LOOP : 0)
1063                 | ((msr & TI_MSR_CTS) ? TIOCM_CTS : 0)
1064                 | ((msr & TI_MSR_CD) ? TIOCM_CAR : 0)
1065                 | ((msr & TI_MSR_RI) ? TIOCM_RI : 0)
1066                 | ((msr & TI_MSR_DSR) ? TIOCM_DSR : 0);
1067
1068         dev_dbg(&port->dev, "%s - 0x%04X\n", __func__, result);
1069
1070         return result;
1071 }
1072
1073
1074 static int ti_tiocmset(struct tty_struct *tty,
1075                                 unsigned int set, unsigned int clear)
1076 {
1077         struct usb_serial_port *port = tty->driver_data;
1078         struct ti_port *tport = usb_get_serial_port_data(port);
1079         unsigned int mcr;
1080         unsigned long flags;
1081
1082         spin_lock_irqsave(&tport->tp_lock, flags);
1083         mcr = tport->tp_shadow_mcr;
1084
1085         if (set & TIOCM_RTS)
1086                 mcr |= TI_MCR_RTS;
1087         if (set & TIOCM_DTR)
1088                 mcr |= TI_MCR_DTR;
1089         if (set & TIOCM_LOOP)
1090                 mcr |= TI_MCR_LOOP;
1091
1092         if (clear & TIOCM_RTS)
1093                 mcr &= ~TI_MCR_RTS;
1094         if (clear & TIOCM_DTR)
1095                 mcr &= ~TI_MCR_DTR;
1096         if (clear & TIOCM_LOOP)
1097                 mcr &= ~TI_MCR_LOOP;
1098         spin_unlock_irqrestore(&tport->tp_lock, flags);
1099
1100         return ti_set_mcr(tport, mcr);
1101 }
1102
1103
1104 static void ti_break(struct tty_struct *tty, int break_state)
1105 {
1106         struct usb_serial_port *port = tty->driver_data;
1107         struct ti_port *tport = usb_get_serial_port_data(port);
1108         int status;
1109
1110         dev_dbg(&port->dev, "%s - state = %d\n", __func__, break_state);
1111
1112         status = ti_write_byte(port, tport->tp_tdev,
1113                 tport->tp_uart_base_addr + TI_UART_OFFSET_LCR,
1114                 TI_LCR_BREAK, break_state == -1 ? TI_LCR_BREAK : 0);
1115
1116         if (status)
1117                 dev_dbg(&port->dev, "%s - error setting break, %d\n", __func__, status);
1118 }
1119
1120 static int ti_get_port_from_code(unsigned char code)
1121 {
1122         return (code >> 6) & 0x01;
1123 }
1124
1125 static int ti_get_func_from_code(unsigned char code)
1126 {
1127         return code & 0x0f;
1128 }
1129
1130 static void ti_interrupt_callback(struct urb *urb)
1131 {
1132         struct ti_device *tdev = urb->context;
1133         struct usb_serial_port *port;
1134         struct usb_serial *serial = tdev->td_serial;
1135         struct ti_port *tport;
1136         struct device *dev = &urb->dev->dev;
1137         unsigned char *data = urb->transfer_buffer;
1138         int length = urb->actual_length;
1139         int port_number;
1140         int function;
1141         int status = urb->status;
1142         int retval;
1143         u8 msr;
1144
1145         switch (status) {
1146         case 0:
1147                 break;
1148         case -ECONNRESET:
1149         case -ENOENT:
1150         case -ESHUTDOWN:
1151                 dev_dbg(dev, "%s - urb shutting down, %d\n", __func__, status);
1152                 return;
1153         default:
1154                 dev_err(dev, "%s - nonzero urb status, %d\n", __func__, status);
1155                 goto exit;
1156         }
1157
1158         if (length != 2) {
1159                 dev_dbg(dev, "%s - bad packet size, %d\n", __func__, length);
1160                 goto exit;
1161         }
1162
1163         if (data[0] == TI_CODE_HARDWARE_ERROR) {
1164                 dev_err(dev, "%s - hardware error, %d\n", __func__, data[1]);
1165                 goto exit;
1166         }
1167
1168         port_number = ti_get_port_from_code(data[0]);
1169         function = ti_get_func_from_code(data[0]);
1170
1171         dev_dbg(dev, "%s - port_number %d, function %d, data 0x%02X\n",
1172                 __func__, port_number, function, data[1]);
1173
1174         if (port_number >= serial->num_ports) {
1175                 dev_err(dev, "%s - bad port number, %d\n",
1176                                                 __func__, port_number);
1177                 goto exit;
1178         }
1179
1180         port = serial->port[port_number];
1181
1182         tport = usb_get_serial_port_data(port);
1183         if (!tport)
1184                 goto exit;
1185
1186         switch (function) {
1187         case TI_CODE_DATA_ERROR:
1188                 dev_err(dev, "%s - DATA ERROR, port %d, data 0x%02X\n",
1189                         __func__, port_number, data[1]);
1190                 break;
1191
1192         case TI_CODE_MODEM_STATUS:
1193                 msr = data[1];
1194                 dev_dbg(dev, "%s - port %d, msr 0x%02X\n", __func__, port_number, msr);
1195                 ti_handle_new_msr(tport, msr);
1196                 break;
1197
1198         default:
1199                 dev_err(dev, "%s - unknown interrupt code, 0x%02X\n",
1200                                                         __func__, data[1]);
1201                 break;
1202         }
1203
1204 exit:
1205         retval = usb_submit_urb(urb, GFP_ATOMIC);
1206         if (retval)
1207                 dev_err(dev, "%s - resubmit interrupt urb failed, %d\n",
1208                         __func__, retval);
1209 }
1210
1211
1212 static void ti_bulk_in_callback(struct urb *urb)
1213 {
1214         struct ti_port *tport = urb->context;
1215         struct usb_serial_port *port = tport->tp_port;
1216         struct device *dev = &urb->dev->dev;
1217         int status = urb->status;
1218         unsigned long flags;
1219         int retval = 0;
1220
1221         switch (status) {
1222         case 0:
1223                 break;
1224         case -ECONNRESET:
1225         case -ENOENT:
1226         case -ESHUTDOWN:
1227                 dev_dbg(dev, "%s - urb shutting down, %d\n", __func__, status);
1228                 return;
1229         default:
1230                 dev_err(dev, "%s - nonzero urb status, %d\n",
1231                         __func__, status);
1232         }
1233
1234         if (status == -EPIPE)
1235                 goto exit;
1236
1237         if (status) {
1238                 dev_err(dev, "%s - stopping read!\n", __func__);
1239                 return;
1240         }
1241
1242         if (urb->actual_length) {
1243                 usb_serial_debug_data(dev, __func__, urb->actual_length,
1244                                       urb->transfer_buffer);
1245
1246                 if (!tport->tp_is_open)
1247                         dev_dbg(dev, "%s - port closed, dropping data\n",
1248                                 __func__);
1249                 else
1250                         ti_recv(port, urb->transfer_buffer, urb->actual_length);
1251                 spin_lock_irqsave(&tport->tp_lock, flags);
1252                 port->icount.rx += urb->actual_length;
1253                 spin_unlock_irqrestore(&tport->tp_lock, flags);
1254         }
1255
1256 exit:
1257         /* continue to read unless stopping */
1258         spin_lock_irqsave(&tport->tp_lock, flags);
1259         if (tport->tp_read_urb_state == TI_READ_URB_RUNNING)
1260                 retval = usb_submit_urb(urb, GFP_ATOMIC);
1261         else if (tport->tp_read_urb_state == TI_READ_URB_STOPPING)
1262                 tport->tp_read_urb_state = TI_READ_URB_STOPPED;
1263
1264         spin_unlock_irqrestore(&tport->tp_lock, flags);
1265         if (retval)
1266                 dev_err(dev, "%s - resubmit read urb failed, %d\n",
1267                         __func__, retval);
1268 }
1269
1270
1271 static void ti_bulk_out_callback(struct urb *urb)
1272 {
1273         struct ti_port *tport = urb->context;
1274         struct usb_serial_port *port = tport->tp_port;
1275         int status = urb->status;
1276
1277         tport->tp_write_urb_in_use = 0;
1278
1279         switch (status) {
1280         case 0:
1281                 break;
1282         case -ECONNRESET:
1283         case -ENOENT:
1284         case -ESHUTDOWN:
1285                 dev_dbg(&port->dev, "%s - urb shutting down, %d\n", __func__, status);
1286                 return;
1287         default:
1288                 dev_err_console(port, "%s - nonzero urb status, %d\n",
1289                         __func__, status);
1290         }
1291
1292         /* send any buffered data */
1293         ti_send(tport);
1294 }
1295
1296
1297 static void ti_recv(struct usb_serial_port *port, unsigned char *data,
1298                 int length)
1299 {
1300         int cnt;
1301
1302         do {
1303                 cnt = tty_insert_flip_string(&port->port, data, length);
1304                 if (cnt < length) {
1305                         dev_err(&port->dev, "%s - dropping data, %d bytes lost\n",
1306                                                 __func__, length - cnt);
1307                         if (cnt == 0)
1308                                 break;
1309                 }
1310                 tty_flip_buffer_push(&port->port);
1311                 data += cnt;
1312                 length -= cnt;
1313         } while (length > 0);
1314 }
1315
1316
1317 static void ti_send(struct ti_port *tport)
1318 {
1319         int count, result;
1320         struct usb_serial_port *port = tport->tp_port;
1321         unsigned long flags;
1322
1323         spin_lock_irqsave(&tport->tp_lock, flags);
1324
1325         if (tport->tp_write_urb_in_use)
1326                 goto unlock;
1327
1328         count = kfifo_out(&port->write_fifo,
1329                                 port->write_urb->transfer_buffer,
1330                                 port->bulk_out_size);
1331
1332         if (count == 0)
1333                 goto unlock;
1334
1335         tport->tp_write_urb_in_use = 1;
1336
1337         spin_unlock_irqrestore(&tport->tp_lock, flags);
1338
1339         usb_serial_debug_data(&port->dev, __func__, count,
1340                               port->write_urb->transfer_buffer);
1341
1342         usb_fill_bulk_urb(port->write_urb, port->serial->dev,
1343                            usb_sndbulkpipe(port->serial->dev,
1344                                             port->bulk_out_endpointAddress),
1345                            port->write_urb->transfer_buffer, count,
1346                            ti_bulk_out_callback, tport);
1347
1348         result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
1349         if (result) {
1350                 dev_err_console(port, "%s - submit write urb failed, %d\n",
1351                                                         __func__, result);
1352                 tport->tp_write_urb_in_use = 0;
1353                 /* TODO: reschedule ti_send */
1354         } else {
1355                 spin_lock_irqsave(&tport->tp_lock, flags);
1356                 port->icount.tx += count;
1357                 spin_unlock_irqrestore(&tport->tp_lock, flags);
1358         }
1359
1360         /* more room in the buffer for new writes, wakeup */
1361         tty_port_tty_wakeup(&port->port);
1362
1363         return;
1364 unlock:
1365         spin_unlock_irqrestore(&tport->tp_lock, flags);
1366         return;
1367 }
1368
1369
1370 static int ti_set_mcr(struct ti_port *tport, unsigned int mcr)
1371 {
1372         unsigned long flags;
1373         int status;
1374
1375         status = ti_write_byte(tport->tp_port, tport->tp_tdev,
1376                 tport->tp_uart_base_addr + TI_UART_OFFSET_MCR,
1377                 TI_MCR_RTS | TI_MCR_DTR | TI_MCR_LOOP, mcr);
1378
1379         spin_lock_irqsave(&tport->tp_lock, flags);
1380         if (!status)
1381                 tport->tp_shadow_mcr = mcr;
1382         spin_unlock_irqrestore(&tport->tp_lock, flags);
1383
1384         return status;
1385 }
1386
1387
1388 static int ti_get_lsr(struct ti_port *tport, u8 *lsr)
1389 {
1390         int size, status;
1391         struct ti_device *tdev = tport->tp_tdev;
1392         struct usb_serial_port *port = tport->tp_port;
1393         int port_number = port->port_number;
1394         struct ti_port_status *data;
1395
1396         size = sizeof(struct ti_port_status);
1397         data = kmalloc(size, GFP_KERNEL);
1398         if (!data)
1399                 return -ENOMEM;
1400
1401         status = ti_command_in_sync(tdev, TI_GET_PORT_STATUS,
1402                 (__u8)(TI_UART1_PORT+port_number), 0, (__u8 *)data, size);
1403         if (status) {
1404                 dev_err(&port->dev,
1405                         "%s - get port status command failed, %d\n",
1406                                                         __func__, status);
1407                 goto free_data;
1408         }
1409
1410         dev_dbg(&port->dev, "%s - lsr 0x%02X\n", __func__, data->bLSR);
1411
1412         *lsr = data->bLSR;
1413
1414 free_data:
1415         kfree(data);
1416         return status;
1417 }
1418
1419
1420 static int ti_get_serial_info(struct ti_port *tport,
1421         struct serial_struct __user *ret_arg)
1422 {
1423         struct usb_serial_port *port = tport->tp_port;
1424         struct serial_struct ret_serial;
1425         unsigned cwait;
1426
1427         cwait = port->port.closing_wait;
1428         if (cwait != ASYNC_CLOSING_WAIT_NONE)
1429                 cwait = jiffies_to_msecs(cwait) / 10;
1430
1431         memset(&ret_serial, 0, sizeof(ret_serial));
1432
1433         ret_serial.type = PORT_16550A;
1434         ret_serial.line = port->minor;
1435         ret_serial.port = port->port_number;
1436         ret_serial.xmit_fifo_size = kfifo_size(&port->write_fifo);
1437         ret_serial.baud_base = tport->tp_tdev->td_is_3410 ? 921600 : 460800;
1438         ret_serial.closing_wait = cwait;
1439
1440         if (copy_to_user(ret_arg, &ret_serial, sizeof(*ret_arg)))
1441                 return -EFAULT;
1442
1443         return 0;
1444 }
1445
1446
1447 static int ti_set_serial_info(struct tty_struct *tty, struct ti_port *tport,
1448         struct serial_struct __user *new_arg)
1449 {
1450         struct serial_struct new_serial;
1451         unsigned cwait;
1452
1453         if (copy_from_user(&new_serial, new_arg, sizeof(new_serial)))
1454                 return -EFAULT;
1455
1456         cwait = new_serial.closing_wait;
1457         if (cwait != ASYNC_CLOSING_WAIT_NONE)
1458                 cwait = msecs_to_jiffies(10 * new_serial.closing_wait);
1459
1460         tport->tp_port->port.closing_wait = cwait;
1461
1462         return 0;
1463 }
1464
1465
1466 static void ti_handle_new_msr(struct ti_port *tport, u8 msr)
1467 {
1468         struct async_icount *icount;
1469         struct tty_struct *tty;
1470         unsigned long flags;
1471
1472         dev_dbg(&tport->tp_port->dev, "%s - msr 0x%02X\n", __func__, msr);
1473
1474         if (msr & TI_MSR_DELTA_MASK) {
1475                 spin_lock_irqsave(&tport->tp_lock, flags);
1476                 icount = &tport->tp_port->icount;
1477                 if (msr & TI_MSR_DELTA_CTS)
1478                         icount->cts++;
1479                 if (msr & TI_MSR_DELTA_DSR)
1480                         icount->dsr++;
1481                 if (msr & TI_MSR_DELTA_CD)
1482                         icount->dcd++;
1483                 if (msr & TI_MSR_DELTA_RI)
1484                         icount->rng++;
1485                 wake_up_interruptible(&tport->tp_port->port.delta_msr_wait);
1486                 spin_unlock_irqrestore(&tport->tp_lock, flags);
1487         }
1488
1489         tport->tp_msr = msr & TI_MSR_MASK;
1490
1491         /* handle CTS flow control */
1492         tty = tty_port_tty_get(&tport->tp_port->port);
1493         if (tty && C_CRTSCTS(tty)) {
1494                 if (msr & TI_MSR_CTS)
1495                         tty_wakeup(tty);
1496         }
1497         tty_kref_put(tty);
1498 }
1499
1500
1501 static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty)
1502 {
1503         unsigned long flags;
1504
1505         spin_lock_irqsave(&tport->tp_lock, flags);
1506
1507         if (tport->tp_read_urb_state == TI_READ_URB_RUNNING)
1508                 tport->tp_read_urb_state = TI_READ_URB_STOPPING;
1509
1510         spin_unlock_irqrestore(&tport->tp_lock, flags);
1511 }
1512
1513
1514 static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty)
1515 {
1516         struct urb *urb;
1517         int status = 0;
1518         unsigned long flags;
1519
1520         spin_lock_irqsave(&tport->tp_lock, flags);
1521
1522         if (tport->tp_read_urb_state == TI_READ_URB_STOPPED) {
1523                 tport->tp_read_urb_state = TI_READ_URB_RUNNING;
1524                 urb = tport->tp_port->read_urb;
1525                 spin_unlock_irqrestore(&tport->tp_lock, flags);
1526                 urb->context = tport;
1527                 status = usb_submit_urb(urb, GFP_KERNEL);
1528         } else  {
1529                 tport->tp_read_urb_state = TI_READ_URB_RUNNING;
1530                 spin_unlock_irqrestore(&tport->tp_lock, flags);
1531         }
1532
1533         return status;
1534 }
1535
1536
1537 static int ti_command_out_sync(struct ti_device *tdev, __u8 command,
1538         __u16 moduleid, __u16 value, __u8 *data, int size)
1539 {
1540         int status;
1541
1542         status = usb_control_msg(tdev->td_serial->dev,
1543                 usb_sndctrlpipe(tdev->td_serial->dev, 0), command,
1544                 (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT),
1545                 value, moduleid, data, size, 1000);
1546
1547         if (status < 0)
1548                 return status;
1549
1550         return 0;
1551 }
1552
1553
1554 static int ti_command_in_sync(struct ti_device *tdev, __u8 command,
1555         __u16 moduleid, __u16 value, __u8 *data, int size)
1556 {
1557         int status;
1558
1559         status = usb_control_msg(tdev->td_serial->dev,
1560                 usb_rcvctrlpipe(tdev->td_serial->dev, 0), command,
1561                 (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN),
1562                 value, moduleid, data, size, 1000);
1563
1564         if (status == size)
1565                 status = 0;
1566         else if (status >= 0)
1567                 status = -ECOMM;
1568
1569         return status;
1570 }
1571
1572
1573 static int ti_write_byte(struct usb_serial_port *port,
1574                          struct ti_device *tdev, unsigned long addr,
1575                          u8 mask, u8 byte)
1576 {
1577         int status;
1578         unsigned int size;
1579         struct ti_write_data_bytes *data;
1580
1581         dev_dbg(&port->dev, "%s - addr 0x%08lX, mask 0x%02X, byte 0x%02X\n", __func__,
1582                 addr, mask, byte);
1583
1584         size = sizeof(struct ti_write_data_bytes) + 2;
1585         data = kmalloc(size, GFP_KERNEL);
1586         if (!data)
1587                 return -ENOMEM;
1588
1589         data->bAddrType = TI_RW_DATA_ADDR_XDATA;
1590         data->bDataType = TI_RW_DATA_BYTE;
1591         data->bDataCounter = 1;
1592         data->wBaseAddrHi = cpu_to_be16(addr>>16);
1593         data->wBaseAddrLo = cpu_to_be16(addr);
1594         data->bData[0] = mask;
1595         data->bData[1] = byte;
1596
1597         status = ti_command_out_sync(tdev, TI_WRITE_DATA, TI_RAM_PORT, 0,
1598                 (__u8 *)data, size);
1599
1600         if (status < 0)
1601                 dev_err(&port->dev, "%s - failed, %d\n", __func__, status);
1602
1603         kfree(data);
1604
1605         return status;
1606 }
1607
1608 static int ti_do_download(struct usb_device *dev, int pipe,
1609                                                 u8 *buffer, int size)
1610 {
1611         int pos;
1612         u8 cs = 0;
1613         int done;
1614         struct ti_firmware_header *header;
1615         int status = 0;
1616         int len;
1617
1618         for (pos = sizeof(struct ti_firmware_header); pos < size; pos++)
1619                 cs = (u8)(cs + buffer[pos]);
1620
1621         header = (struct ti_firmware_header *)buffer;
1622         header->wLength = cpu_to_le16(size - sizeof(*header));
1623         header->bCheckSum = cs;
1624
1625         dev_dbg(&dev->dev, "%s - downloading firmware\n", __func__);
1626         for (pos = 0; pos < size; pos += done) {
1627                 len = min(size - pos, TI_DOWNLOAD_MAX_PACKET_SIZE);
1628                 status = usb_bulk_msg(dev, pipe, buffer + pos, len,
1629                                                                 &done, 1000);
1630                 if (status)
1631                         break;
1632         }
1633         return status;
1634 }
1635
1636 static int ti_download_firmware(struct ti_device *tdev)
1637 {
1638         int status;
1639         int buffer_size;
1640         u8 *buffer;
1641         struct usb_device *dev = tdev->td_serial->dev;
1642         unsigned int pipe = usb_sndbulkpipe(dev,
1643                 tdev->td_serial->port[0]->bulk_out_endpointAddress);
1644         const struct firmware *fw_p;
1645         char buf[32];
1646
1647         if (le16_to_cpu(dev->descriptor.idVendor) == MXU1_VENDOR_ID) {
1648                 snprintf(buf,
1649                         sizeof(buf),
1650                         "moxa/moxa-%04x.fw",
1651                         le16_to_cpu(dev->descriptor.idProduct));
1652
1653                 status = request_firmware(&fw_p, buf, &dev->dev);
1654                 goto check_firmware;
1655         }
1656
1657         /* try ID specific firmware first, then try generic firmware */
1658         sprintf(buf, "ti_usb-v%04x-p%04x.fw",
1659                         le16_to_cpu(dev->descriptor.idVendor),
1660                         le16_to_cpu(dev->descriptor.idProduct));
1661         status = request_firmware(&fw_p, buf, &dev->dev);
1662
1663         if (status != 0) {
1664                 buf[0] = '\0';
1665                 if (le16_to_cpu(dev->descriptor.idVendor) == MTS_VENDOR_ID) {
1666                         switch (le16_to_cpu(dev->descriptor.idProduct)) {
1667                         case MTS_CDMA_PRODUCT_ID:
1668                                 strcpy(buf, "mts_cdma.fw");
1669                                 break;
1670                         case MTS_GSM_PRODUCT_ID:
1671                                 strcpy(buf, "mts_gsm.fw");
1672                                 break;
1673                         case MTS_EDGE_PRODUCT_ID:
1674                                 strcpy(buf, "mts_edge.fw");
1675                                 break;
1676                         case MTS_MT9234MU_PRODUCT_ID:
1677                                 strcpy(buf, "mts_mt9234mu.fw");
1678                                 break;
1679                         case MTS_MT9234ZBA_PRODUCT_ID:
1680                                 strcpy(buf, "mts_mt9234zba.fw");
1681                                 break;
1682                         case MTS_MT9234ZBAOLD_PRODUCT_ID:
1683                                 strcpy(buf, "mts_mt9234zba.fw");
1684                                 break;                  }
1685                 }
1686                 if (buf[0] == '\0') {
1687                         if (tdev->td_is_3410)
1688                                 strcpy(buf, "ti_3410.fw");
1689                         else
1690                                 strcpy(buf, "ti_5052.fw");
1691                 }
1692                 status = request_firmware(&fw_p, buf, &dev->dev);
1693         }
1694
1695 check_firmware:
1696         if (status) {
1697                 dev_err(&dev->dev, "%s - firmware not found\n", __func__);
1698                 return -ENOENT;
1699         }
1700         if (fw_p->size > TI_FIRMWARE_BUF_SIZE) {
1701                 dev_err(&dev->dev, "%s - firmware too large %zu\n", __func__, fw_p->size);
1702                 release_firmware(fw_p);
1703                 return -ENOENT;
1704         }
1705
1706         buffer_size = TI_FIRMWARE_BUF_SIZE + sizeof(struct ti_firmware_header);
1707         buffer = kmalloc(buffer_size, GFP_KERNEL);
1708         if (buffer) {
1709                 memcpy(buffer, fw_p->data, fw_p->size);
1710                 memset(buffer + fw_p->size, 0xff, buffer_size - fw_p->size);
1711                 status = ti_do_download(dev, pipe, buffer, fw_p->size);
1712                 kfree(buffer);
1713         } else {
1714                 status = -ENOMEM;
1715         }
1716         release_firmware(fw_p);
1717         if (status) {
1718                 dev_err(&dev->dev, "%s - error downloading firmware, %d\n",
1719                                                         __func__, status);
1720                 return status;
1721         }
1722
1723         dev_dbg(&dev->dev, "%s - download successful\n", __func__);
1724
1725         return 0;
1726 }