Merge branch 'ti-linux-4.14.y-for-next' of git://git.ti.com/~vigneshr/ti-linux-kernel/vigneshr-ti-linux-kernel into ti-linux-4.14.y-next

TI-Feature: vignesh_next
TI-Tree: git://git.ti.com/~vigneshr/ti-linux-kernel/vigneshr-ti-linux-kernel.git
TI-Branch: ti-linux-4.14.y-for-next

* 'ti-linux-4.14.y-for-next' of git://git.ti.com/~vigneshr/ti-linux-kernel/vigneshr-ti-linux-kernel:
  connectivity.cfg: Enable UBIFS related configs
  mtd: spi-nor: cadence-quadspi: Fix direct mode write timeouts

Signed-off-by: LCPD Auto Merger <lcpd_integration@list.ti.com>

Merge branch 'linux-4.14.y' of http://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc into ti-linux-4.14.y-next

TI-Feature: linux-stable-4.14-rc
TI-Tree: http://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
TI-Branch: linux-4.14.y

* 'linux-4.14.y' of http://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc: (158 commits)
  Linux 4.14.53-rc2
  xhci: Fix use-after-free in xhci_free_virt_device
  dm thin: handle running out of data space vs concurrent discard
  dm zoned: avoid triggering reclaim from inside dmz_map()
  x86/efi: Fix efi_call_phys_epilog() with CONFIG_X86_5LEVEL=y
  block: Fix cloning of requests with a special payload
  block: Fix transfer when chunk sectors exceeds max
  slub: fix failure when we delete and create a slab cache
  ALSA: hda/realtek - Fix the problem of two front mics on more machines
  ALSA: hda/realtek - Add a quirk for FSC ESPRIMO U9210
  ALSA: hda/realtek - Fix pop noise on Lenovo P50 & co
  ALSA: timer: Fix UBSAN warning at SNDRV_TIMER_IOCTL_NEXT_DEVICE ioctl
  Input: elantech - fix V4 report decoding for module with middle key
  Input: elantech - enable middle button of touchpads on ThinkPad P52
  Input: elan_i2c_smbus - fix more potential stack buffer overflows
  Input: xpad - fix GPD Win 2 controller name
  udf: Detect incorrect directory size
  xen: Remove unnecessary BUG_ON from __unbind_from_irq()
  mm: fix devmem_is_allowed() for sub-page System RAM intersections
  mm/ksm.c: ignore STABLE_FLAG of rmap_item->address in rmap_walk_ksm()
  ...

Signed-off-by: LCPD Auto Merger <lcpd_integration@list.ti.com>

Merge branch 'connectivity-ti-linux-4.14.y' of git://git.ti.com/connectivity-integration-tree/connectivity-ti-linux-kernel into ti-linux-4.14.y

TI-Feature: connectivity
TI-Tree: git://git.ti.com/connectivity-integration-tree/connectivity-ti-linux-kernel.git
TI-Branch: connectivity-ti-linux-4.14.y

* 'connectivity-ti-linux-4.14.y' of git://git.ti.com/connectivity-integration-tree/connectivity-ti-linux-kernel:
  connectivity.cfg: Enable UBIFS related configs
  mtd: spi-nor: cadence-quadspi: Fix direct mode write timeouts
  net: ti: icssg-prueth: Fix build and compiler warnings for arm build

Signed-off-by: LCPD Auto Merger <lcpd_integration@list.ti.com>

connectivity.cfg: Enable UBIFS related configs

Enable UBIFS for NAND/NOR and other flash devices.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

mtd: spi-nor: cadence-quadspi: Fix direct mode write timeouts

Sometimes when writing large size files to flash in direct/memory mapped
mode, it is seen that flash write enable command times out with error:
[  503.146293] cadence-qspi 47040000.ospi: Flash command execution timed out.

This is because, we need to make sure previous direct write operation
is complete by polling for IDLE bit in CONFIG_REG before starting the
next operation.

Fix this by polling for IDLE bit after memory mapped write.

Fixes: 8916912d800a ("mtd: spi-nor: cadence-quadspi: Add support for direct access mode")
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

Linux 4.14.53-rc2

xhci: Fix use-after-free in xhci_free_virt_device

commit 44a182b9d17765514fa2b1cc911e4e65134eef93 upstream.

KASAN found a use-after-free in xhci_free_virt_device+0x33b/0x38e
where xhci_free_virt_device() sets slot id to 0 if udev exists:
if (dev->udev && dev->udev->slot_id)
dev->udev->slot_id = 0;

dev->udev will be true even if udev is freed because dev->udev is
not set to NULL.

set dev->udev pointer to NULL in xhci_free_dev()

The original patch went to stable so this fix needs to be applied
there as well.

Fixes: a400efe455f7 ("xhci: zero usb device slot_id member when disabling and freeing a xhci slot")
Cc: <stable@vger.kernel.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm thin: handle running out of data space vs concurrent discard

commit a685557fbbc3122ed11e8ad3fa63a11ebc5de8c3 upstream.

Discards issued to a DM thin device can complete to userspace (via
fstrim) _before_ the metadata changes associated with the discards is
reflected in the thinp superblock (e.g. free blocks).  As such, if a
user constructs a test that loops repeatedly over these steps, block
allocation can fail due to discards not having completed yet:
1) fill thin device via filesystem file
2) remove file
3) fstrim

From initial report, here:
https://www.redhat.com/archives/dm-devel/2018-April/msg00022.html

"The root cause of this issue is that dm-thin will first remove
mapping and increase corresponding blocks' reference count to prevent
them from being reused before DISCARD bios get processed by the
underlying layers. However. increasing blocks' reference count could
also increase the nr_allocated_this_transaction in struct sm_disk
which makes smd->old_ll.nr_allocated +
smd->nr_allocated_this_transaction bigger than smd->old_ll.nr_blocks.
In this case, alloc_data_block() will never commit metadata to reset
the begin pointer of struct sm_disk, because sm_disk_get_nr_free()
always return an underflow value."

While there is room for improvement to the space-map accounting that
thinp is making use of: the reality is this test is inherently racey and
will result in the previous iteration's fstrim's discard(s) completing
vs concurrent block allocation, via dd, in the next iteration of the
loop.

No amount of space map accounting improvements will be able to allow
user's to use a block before a discard of that block has completed.

So the best we can really do is allow DM thinp to gracefully handle such
aggressive use of all the pool's data by degrading the pool into
out-of-data-space (OODS) mode.  We _should_ get that behaviour already
(if space map accounting didn't falsely cause alloc_data_block() to
believe free space was available).. but short of that we handle the
current reality that dm_pool_alloc_data_block() can return -ENOSPC.

Reported-by: Dennis Yang <dennisyang@qnap.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm zoned: avoid triggering reclaim from inside dmz_map()

commit 2d0b2d64d325e22939d9db3ba784f1236459ed98 upstream.

This patch avoids that lockdep reports the following:

======================================================
WARNING: possible circular locking dependency detected
4.18.0-rc1 #62 Not tainted
------------------------------------------------------
kswapd0/84 is trying to acquire lock:
00000000c313516d (&xfs_nondir_ilock_class){++++}, at: xfs_free_eofblocks+0xa2/0x1e0

but task is already holding lock:
00000000591c83ae (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x5/0x30

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 (fs_reclaim){+.+.}:
  kmem_cache_alloc+0x2c/0x2b0
  radix_tree_node_alloc.constprop.19+0x3d/0xc0
  __radix_tree_create+0x161/0x1c0
  __radix_tree_insert+0x45/0x210
  dmz_map+0x245/0x2d0 [dm_zoned]
  __map_bio+0x40/0x260
  __split_and_process_non_flush+0x116/0x220
  __split_and_process_bio+0x81/0x180
  __dm_make_request.isra.32+0x5a/0x100
  generic_make_request+0x36e/0x690
  submit_bio+0x6c/0x140
  mpage_readpages+0x19e/0x1f0
  read_pages+0x6d/0x1b0
  __do_page_cache_readahead+0x21b/0x2d0
  force_page_cache_readahead+0xc4/0x100
  generic_file_read_iter+0x7c6/0xd20
  __vfs_read+0x102/0x180
  vfs_read+0x9b/0x140
  ksys_read+0x55/0xc0
  do_syscall_64+0x5a/0x1f0
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

-> #1 (&dmz->chunk_lock){+.+.}:
  dmz_map+0x133/0x2d0 [dm_zoned]
  __map_bio+0x40/0x260
  __split_and_process_non_flush+0x116/0x220
  __split_and_process_bio+0x81/0x180
  __dm_make_request.isra.32+0x5a/0x100
  generic_make_request+0x36e/0x690
  submit_bio+0x6c/0x140
  _xfs_buf_ioapply+0x31c/0x590
  xfs_buf_submit_wait+0x73/0x520
  xfs_buf_read_map+0x134/0x2f0
  xfs_trans_read_buf_map+0xc3/0x580
  xfs_read_agf+0xa5/0x1e0
  xfs_alloc_read_agf+0x59/0x2b0
  xfs_alloc_pagf_init+0x27/0x60
  xfs_bmap_longest_free_extent+0x43/0xb0
  xfs_bmap_btalloc_nullfb+0x7f/0xf0
  xfs_bmap_btalloc+0x428/0x7c0
  xfs_bmapi_write+0x598/0xcc0
  xfs_iomap_write_allocate+0x15a/0x330
  xfs_map_blocks+0x1cf/0x3f0
  xfs_do_writepage+0x15f/0x7b0
  write_cache_pages+0x1ca/0x540
  xfs_vm_writepages+0x65/0xa0
  do_writepages+0x48/0xf0
  __writeback_single_inode+0x58/0x730
  writeback_sb_inodes+0x249/0x5c0
  wb_writeback+0x11e/0x550
  wb_workfn+0xa3/0x670
  process_one_work+0x228/0x670
  worker_thread+0x3c/0x390
  kthread+0x11c/0x140
  ret_from_fork+0x3a/0x50

-> #0 (&xfs_nondir_ilock_class){++++}:
  down_read_nested+0x43/0x70
  xfs_free_eofblocks+0xa2/0x1e0
  xfs_fs_destroy_inode+0xac/0x270
  dispose_list+0x51/0x80
  prune_icache_sb+0x52/0x70
  super_cache_scan+0x127/0x1a0
  shrink_slab.part.47+0x1bd/0x590
  shrink_node+0x3b5/0x470
  balance_pgdat+0x158/0x3b0
  kswapd+0x1ba/0x600
  kthread+0x11c/0x140
  ret_from_fork+0x3a/0x50

other info that might help us debug this:

Chain exists of:
  &xfs_nondir_ilock_class --> &dmz->chunk_lock --> fs_reclaim

Possible unsafe locking scenario:

     CPU0                    CPU1
     ----                    ----
lock(fs_reclaim);
                             lock(&dmz->chunk_lock);
                             lock(fs_reclaim);
lock(&xfs_nondir_ilock_class);

x86/efi: Fix efi_call_phys_epilog() with CONFIG_X86_5LEVEL=y

commit cfe19577047e74cdac5826adbdc2337d8437f8fb upstream.

Open-coded page table entry checks don't work correctly when we fold the
page table level at runtime.

pgd_present() on 4-level paging machine always returns true, but
open-coded version of the check may return false-negative result and
we silently skip the rest of the loop body in efi_call_phys_epilog().

Replace open-coded checks with proper helpers.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org # v4.12+
Fixes: 94133e46a0f5 ("x86/efi: Correct EFI identity mapping under 'efi=old_map' when KASLR is enabled")
Link: http://lkml.kernel.org/r/20180625120852.18300-1-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: Fix cloning of requests with a special payload

commit 297ba57dcdec7ea37e702bcf1a577ac32a034e21 upstream.

This patch avoids that removing a path controlled by the dm-mpath driver
while mkfs is running triggers the following kernel bug:

    kernel BUG at block/blk-core.c:3347!
    invalid opcode: 0000 [#1] PREEMPT SMP KASAN
    CPU: 20 PID: 24369 Comm: mkfs.ext4 Not tainted 4.18.0-rc1-dbg+ #2
    RIP: 0010:blk_end_request_all+0x68/0x70
    Call Trace:
     <IRQ>
     dm_softirq_done+0x326/0x3d0 [dm_mod]
     blk_done_softirq+0x19b/0x1e0
     __do_softirq+0x128/0x60d
     irq_exit+0x100/0x110
     smp_call_function_single_interrupt+0x90/0x330
     call_function_single_interrupt+0xf/0x20
     </IRQ>

Fixes: f9d03f96b988 ("block: improve handling of the magic discard payload")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: Fix transfer when chunk sectors exceeds max

commit 15bfd21fbc5d35834b9ea383dc458a1f0c9e3434 upstream.

A device may have boundary restrictions where the number of sectors
between boundaries exceeds its max transfer size. In this case, we need
to cap the max size to the smaller of the two limits.

Reported-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com>
Tested-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

slub: fix failure when we delete and create a slab cache

commit d50d82faa0c964e31f7a946ba8aba7c715ca7ab0 upstream.

In kernel 4.17 I removed some code from dm-bufio that did slab cache
merging (commit 21bb13276768: "dm bufio: remove code that merges slab
caches") - both slab and slub support merging caches with identical
attributes, so dm-bufio now just calls kmem_cache_create and relies on
implicit merging.

This uncovered a bug in the slub subsystem - if we delete a cache and
immediatelly create another cache with the same attributes, it fails
because of duplicate filename in /sys/kernel/slab/.  The slub subsystem
offloads freeing the cache to a workqueue - and if we create the new
cache before the workqueue runs, it complains because of duplicate
filename in sysfs.

This patch fixes the bug by moving the call of kobject_del from
sysfs_slab_remove_workfn to shutdown_cache.  kobject_del must be called
while we hold slab_mutex - so that the sysfs entry is deleted before a
cache with the same attributes could be created.

Running device-mapper-test-suite with:

  dmtest run --suite thin-provisioning -n /commit_failure_causes_fallback/

triggered:

  Buffer I/O error on dev dm-0, logical block 1572848, async page read
  device-mapper: thin: 253:1: metadata operation 'dm_pool_alloc_data_block' failed: error = -5
  device-mapper: thin: 253:1: aborting current metadata transaction
  sysfs: cannot create duplicate filename '/kernel/slab/:a-0000144'
  CPU: 2 PID: 1037 Comm: kworker/u48:1 Not tainted 4.17.0.snitm+ #25
  Hardware name: Supermicro SYS-1029P-WTR/X11DDW-L, BIOS 2.0a 12/06/2017
  Workqueue: dm-thin do_worker [dm_thin_pool]
  Call Trace:
   dump_stack+0x5a/0x73
   sysfs_warn_dup+0x58/0x70
   sysfs_create_dir_ns+0x77/0x80
   kobject_add_internal+0xba/0x2e0
   kobject_init_and_add+0x70/0xb0
   sysfs_slab_add+0xb1/0x250
   __kmem_cache_create+0x116/0x150
   create_cache+0xd9/0x1f0
   kmem_cache_create_usercopy+0x1c1/0x250
   kmem_cache_create+0x18/0x20
   dm_bufio_client_create+0x1ae/0x410 [dm_bufio]
   dm_block_manager_create+0x5e/0x90 [dm_persistent_data]
   __create_persistent_data_objects+0x38/0x940 [dm_thin_pool]
   dm_pool_abort_metadata+0x64/0x90 [dm_thin_pool]
   metadata_operation_failed+0x59/0x100 [dm_thin_pool]
   alloc_data_block.isra.53+0x86/0x180 [dm_thin_pool]
   process_cell+0x2a3/0x550 [dm_thin_pool]
   do_worker+0x28d/0x8f0 [dm_thin_pool]
   process_one_work+0x171/0x370
   worker_thread+0x49/0x3f0
   kthread+0xf8/0x130
   ret_from_fork+0x35/0x40
  kobject_add_internal failed for :a-0000144 with -EEXIST, don't try to register things with the same name in the same directory.
  kmem_cache_create(dm_bufio_buffer-16) failed with error -17

Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1806151817130.6333@file01.intranet.prod.int.rdu2.redhat.com
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: Mike Snitzer <snitzer@redhat.com>
Tested-by: Mike Snitzer <snitzer@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Fix the problem of two front mics on more machines

commit e41fc8c5bd41b96bfae5ce4c66bee6edabc932e8 upstream.

We have 3 more Lenovo machines, they all have 2 front mics on them,
so they need the fixup to change the location for one of two mics.

Among these 3 Lenovo machines, one of them has the same pin cfg as the
machine with subid 0x17aa3138, so use the pin cfg table to apply fixup
for them. The rest machines don't share the same pin cfg, so far use
the subid to apply fixup for them.

Fixes: a3dafb2200bf ("ALSA: hda/realtek - adjust the location of one mic")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Add a quirk for FSC ESPRIMO U9210

commit 275ec0cb946cb75ac8977f662e608fce92f8b8a8 upstream.

Fujitsu Seimens ESPRIMO Mobile U9210 requires the same fixup as H270
for the correct pin configs.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200107
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Fix pop noise on Lenovo P50 & co

commit d5a6cabf02210b896a60eee7c04c670ee9ba6dca upstream.

Some Lenovo laptops, e.g. Lenovo P50, showed the pop noise at resume
or runtime resume.  It turned out to be reduced by applying
alc_no_shutup() just like TPT440 quirk does.

Since there are many Lenovo models showing the same behavior, put this
workaround in ALC269_FIXUP_THINKPAD_ACPI entry so that it's applied
commonly to all such Lenovo machines.

Reported-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Benjamin Berg <bberg@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: timer: Fix UBSAN warning at SNDRV_TIMER_IOCTL_NEXT_DEVICE ioctl

commit b41f794f284966fd6ec634111e3b40d241389f96 upstream.

The kernel may spew a WARNING about UBSAN undefined behavior at
handling ALSA timer ioctl SNDRV_TIMER_IOCTL_NEXT_DEVICE:

UBSAN: Undefined behaviour in sound/core/timer.c:1524:19
signed integer overflow:
2147483647 + 1 cannot be represented in type 'int'
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x122/0x1c8 lib/dump_stack.c:113
 ubsan_epilogue+0x12/0x86 lib/ubsan.c:159
 handle_overflow+0x1c2/0x21f lib/ubsan.c:190
 __ubsan_handle_add_overflow+0x2a/0x31 lib/ubsan.c:198
 snd_timer_user_next_device sound/core/timer.c:1524 [inline]
 __snd_timer_user_ioctl+0x204d/0x2520 sound/core/timer.c:1939
 snd_timer_user_ioctl+0x67/0x95 sound/core/timer.c:1994
 ....

It happens only when a value with INT_MAX is passed, as we're
incrementing it unconditionally.  So the fix is trivial, check the
value with INT_MAX.  Although the bug itself is fairly harmless, it's
better to fix it so that fuzzers won't hit this again later.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200213
Reported-and-tested-by: Team OWL337 <icytxw@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: elantech - fix V4 report decoding for module with middle key

commit e0ae2519ca004a628fa55aeef969c37edce522d3 upstream.

Some touchpad has middle key and it will be indicated in bit 2 of packet[0].
We need to fix V4 formation's byte mask to prevent error decoding.

Signed-off-by: KT Liao <kt.liao@emc.com.tw>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: elantech - enable middle button of touchpads on ThinkPad P52

commit 24bb555e6e46d96e2a954aa0295029a81cc9bbaa upstream.

PNPID is better way to identify the type of touchpads.
Enable middle button support on 2 types of touchpads on Lenovo P52.

Cc: stable@vger.kernel.org
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: elan_i2c_smbus - fix more potential stack buffer overflows

commit 50fc7b61959af4b95fafce7fe5dd565199e0b61a upstream.

Commit 40f7090bb1b4 ("Input: elan_i2c_smbus - fix corrupted stack")
fixed most of the functions using i2c_smbus_read_block_data() to
allocate a buffer with the maximum block size.  However three
functions were left unchanged:

* In elan_smbus_initialize(), increase the buffer size in the same
  way.
* In elan_smbus_calibrate_result(), the buffer is provided by the
  caller (calibrate_store()), so introduce a bounce buffer.  Also
  name the result buffer size.
* In elan_smbus_get_report(), the buffer is provided by the caller
  but happens to be the right length.  Add a compile-time assertion
  to ensure this remains the case.

Cc: <stable@vger.kernel.org> # 3.19+
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: xpad - fix GPD Win 2 controller name

commit dd6bee81c942c0ea01030da9356026afb88f9d18 upstream.

This fixes using the controller with SDL2.

SDL2 has a naive algorithm to apply the correct settings to a controller.
For X-Box compatible controllers it expects that the controller name
contains a variation of a 'XBOX'-string.

This patch changes the identifier to contain "X-Box" as substring.  Tested
with Steam and C-Dogs-SDL which both detect the controller properly after
adding this patch.

Fixes: c1ba08390a8b ("Input: xpad - add GPD Win 2 Controller USB IDs")
Cc: stable@vger.kernel.org
Signed-off-by: Enno Boland <gottox@voidlinux.eu>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udf: Detect incorrect directory size

commit fa65653e575fbd958bdf5fb9c4a71a324e39510d upstream.

Detect when a directory entry is (possibly partially) beyond directory
size and return EIO in that case since it means the filesystem is
corrupted. Otherwise directory operations can further corrupt the
directory and possibly also oops the kernel.

CC: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
CC: stable@vger.kernel.org
Reported-and-tested-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen: Remove unnecessary BUG_ON from __unbind_from_irq()

commit eef04c7b3786ff0c9cb1019278b6c6c2ea0ad4ff upstream.

Commit 910f8befdf5b ("xen/pirq: fix error path cleanup when binding
MSIs") fixed a couple of errors in error cleanup path of
xen_bind_pirq_msi_to_irq(). This cleanup allowed a call to
__unbind_from_irq() with an unbound irq, which would result in
triggering the BUG_ON there.

Since there is really no reason for the BUG_ON (xen_free_irq() can
operate on unbound irqs) we can remove it.

Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: fix devmem_is_allowed() for sub-page System RAM intersections

commit 2bdce74412c249ac01dfe36b6b0043ffd7a5361e upstream.

Hussam reports:

    I was poking around and for no real reason, I did cat /dev/mem and
    strings /dev/mem.  Then I saw the following warning in dmesg. I saved it
    and rebooted immediately.

     memremap attempted on mixed range 0x000000000009c000 size: 0x1000
     ------------[ cut here ]------------
     WARNING: CPU: 0 PID: 11810 at kernel/memremap.c:98 memremap+0x104/0x170
     [..]
     Call Trace:
      xlate_dev_mem_ptr+0x25/0x40
      read_mem+0x89/0x1a0
      __vfs_read+0x36/0x170

The memremap() implementation checks for attempts to remap System RAM
with MEMREMAP_WB and instead redirects those mapping attempts to the
linear map.  However, that only works if the physical address range
being remapped is page aligned.  In low memory we have situations like
the following:

    00000000-00000fff : Reserved
    00001000-0009fbff : System RAM
    0009fc00-0009ffff : Reserved

...where System RAM intersects Reserved ranges on a sub-page page
granularity.

Given that devmem_is_allowed() special cases any attempt to map System
RAM in the first 1MB of memory, replace page_is_ram() with the more
precise region_intersects() to trap attempts to map disallowed ranges.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=199999
Link: http://lkml.kernel.org/r/152856436164.18127.2847888121707136898.stgit@dwillia2-desk3.amr.corp.intel.com
Fixes: 92281dee825f ("arch: introduce memremap()")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Hussam Al-Tayeb <me@hussam.eu.org>
Tested-by: Hussam Al-Tayeb <me@hussam.eu.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/ksm.c: ignore STABLE_FLAG of rmap_item->address in rmap_walk_ksm()

commit 1105a2fc022f3c7482e32faf516e8bc44095f778 upstream.

In our armv8a server(QDF2400), I noticed lots of WARN_ON caused by
PAGE_SIZE unaligned for rmap_item->address under memory pressure
tests(start 20 guests and run memhog in the host).

  WARNING: CPU: 4 PID: 4641 at virt/kvm/arm/mmu.c:1826 kvm_age_hva_handler+0xc0/0xc8
  CPU: 4 PID: 4641 Comm: memhog Tainted: G        W 4.17.0-rc3+ #8
  Call trace:
   kvm_age_hva_handler+0xc0/0xc8
   handle_hva_to_gpa+0xa8/0xe0
   kvm_age_hva+0x4c/0xe8
   kvm_mmu_notifier_clear_flush_young+0x54/0x98
   __mmu_notifier_clear_flush_young+0x6c/0xa0
   page_referenced_one+0x154/0x1d8
   rmap_walk_ksm+0x12c/0x1d0
   rmap_walk+0x94/0xa0
   page_referenced+0x194/0x1b0
   shrink_page_list+0x674/0xc28
   shrink_inactive_list+0x26c/0x5b8
   shrink_node_memcg+0x35c/0x620
   shrink_node+0x100/0x430
   do_try_to_free_pages+0xe0/0x3a8
   try_to_free_pages+0xe4/0x230
   __alloc_pages_nodemask+0x564/0xdc0
   alloc_pages_vma+0x90/0x228
   do_anonymous_page+0xc8/0x4d0
   __handle_mm_fault+0x4a0/0x508
   handle_mm_fault+0xf8/0x1b0
   do_page_fault+0x218/0x4b8
   do_translation_fault+0x90/0xa0
   do_mem_abort+0x68/0xf0
   el0_da+0x24/0x28

In rmap_walk_ksm, the rmap_item->address might still have the
STABLE_FLAG, then the start and end in handle_hva_to_gpa might not be
PAGE_SIZE aligned.  Thus it will cause exceptions in handle_hva_to_gpa
on arm64.

This patch fixes it by ignoring (not removing) the low bits of address
when doing rmap_walk_ksm.

IMO, it should be backported to stable tree.  the storm of WARN_ONs is
very easy for me to reproduce.  More than that, I watched a panic (not
reproducible) as follows:

  page:ffff7fe003742d80 count:-4871 mapcount:-2126053375 mapping: (null) index:0x0
  flags: 0x1fffc00000000000()
  raw: 1fffc00000000000 0000000000000000 0000000000000000 ffffecf981470000
  raw: dead000000000100 dead000000000200 ffff8017c001c000 0000000000000000
  page dumped because: nonzero _refcount
  CPU: 29 PID: 18323 Comm: qemu-kvm Tainted: G W 4.14.15-5.hxt.aarch64 #1
  Hardware name: <snip for confidential issues>
  Call trace:
    dump_backtrace+0x0/0x22c
    show_stack+0x24/0x2c
    dump_stack+0x8c/0xb0
    bad_page+0xf4/0x154
    free_pages_check_bad+0x90/0x9c
    free_pcppages_bulk+0x464/0x518
    free_hot_cold_page+0x22c/0x300
    __put_page+0x54/0x60
    unmap_stage2_range+0x170/0x2b4
    kvm_unmap_hva_handler+0x30/0x40
    handle_hva_to_gpa+0xb0/0xec
    kvm_unmap_hva_range+0x5c/0xd0

I even injected a fault on purpose in kvm_unmap_hva_range by seting
size=size-0x200, the call trace is similar as above.  So I thought the
panic is similarly caused by the root cause of WARN_ON.

Andrea said:

: It looks a straightforward safe fix, on x86 hva_to_gfn_memslot would
: zap those bits and hide the misalignment caused by the low metadata
: bits being erroneously left set in the address, but the arm code
: notices when that's the last page in the memslot and the hva_end is
: getting aligned and the size is below one page.
:
: I think the problem triggers in the addr += PAGE_SIZE of
: unmap_stage2_ptes that never matches end because end is aligned but
: addr is not.
:
:  } while (pte++, addr += PAGE_SIZE, addr != end);
:
: x86 again only works on hva_start/hva_end after converting it to
: gfn_start/end and that being in pfn units the bits are zapped before
: they risk to cause trouble.

Jia He said:

: I've tested by myself in arm64 server (QDF2400,46 cpus,96G mem) Without
: this patch, the WARN_ON is very easy for reproducing.  After this patch, I
: have run the same benchmarch for a whole day without any WARN_ONs

Link: http://lkml.kernel.org/r/1525403506-6750-1-git-send-email-hejianet@gmail.com
Signed-off-by: Jia He <jia.he@hxt-semitech.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Tested-by: Jia He <hejianet@gmail.com>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Cc: Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rbd: flush rbd_dev->watch_dwork after watch is unregistered

commit 23edca864951250af845a11da86bb3ea63522ed2 upstream.

There is a problem if we are going to unmap a rbd device and the
watch_dwork is going to queue delayed work for watch:

unmap Thread                    watch Thread                  timer
do_rbd_remove
  cancel_tasks_sync(rbd_dev)
                                queue_delayed_work for watch
  destroy_workqueue(rbd_dev->task_wq)
    drain_workqueue(wq)
    destroy other resources in wq
                                                              call_timer_fn
                                                                __queue_work()

Then the delayed work escape the cancel_tasks_sync() and
destroy_workqueue() and we will get an user-after-free call trace:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
  PGD 0 P4D 0
  Oops: 0000 [#1] SMP PTI
  Modules linked in:
  CPU: 7 PID: 0 Comm: swapper/7 Tainted: G           OE     4.17.0-rc6+ #13
  Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
  RIP: 0010:__queue_work+0x6a/0x3b0
  RSP: 0018:ffff9427df1c3e90 EFLAGS: 00010086
  RAX: ffff9427deca8400 RBX: 0000000000000000 RCX: 0000000000000000
  RDX: ffff9427deca8400 RSI: ffff9427df1c3e50 RDI: 0000000000000000
  RBP: ffff942783e39e00 R08: ffff9427deca8400 R09: ffff9427df1c3f00
  R10: 0000000000000004 R11: 0000000000000005 R12: ffff9427cfb85970
  R13: 0000000000002000 R14: 000000000001eca0 R15: 0000000000000007
  FS:  0000000000000000(0000) GS:ffff9427df1c0000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000000 CR3: 00000004c900a005 CR4: 00000000000206e0
  Call Trace:
   <IRQ>
   ? __queue_work+0x3b0/0x3b0
   call_timer_fn+0x2d/0x130
   run_timer_softirq+0x16e/0x430
   ? tick_sched_timer+0x37/0x70
   __do_softirq+0xd2/0x280
   irq_exit+0xd5/0xe0
   smp_apic_timer_interrupt+0x6c/0x130
   apic_timer_interrupt+0xf/0x20

[ Move rbd_dev->watch_dwork cancellation so that rbd_reregister_watch()
  either bails out early because the watch is UNREGISTERED at that point
  or just gets cancelled. ]

Cc: stable@vger.kernel.org
Fixes: 99d1694310df ("rbd: retry watch re-registration periodically")
Signed-off-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pwm: lpss: platform: Save/restore the ctrl register over a suspend/resume

commit 1d375b58c12f08d8570b30b865def4734517f04f upstream.

On some devices the contents of the ctrl register get lost over a
suspend/resume and the PWM comes back up disabled after the resume.

This is seen on some Bay Trail devices with the PWM in ACPI enumerated
mode, so it shows up as a platform device instead of a PCI device.

If we still think it is enabled and then try to change the duty-cycle
after this, we end up with a "PWM_SW_UPDATE was not cleared" error and
the PWM is stuck in that state from then on.

This commit adds suspend and resume pm callbacks to the pwm-lpss-platform
code, which save/restore the ctrl register over a suspend/resume, fixing
this.

Note that:

1) There is no need to do this over a runtime suspend, since we
only runtime suspend when disabled and then we properly set the enable
bit and reprogram the timings when we re-enable the PWM.

2) This may be happening on more systems then we realize, but has been
covered up sofar by a bug in the acpi-lpss.c code which was save/restoring
the regular device registers instead of the lpss private registers due to
lpss_device_desc.prv_offset not being set. This is fixed by a later patch
in this series.

Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: elan_i2c - add ELAN0618 (Lenovo v330 15IKB) ACPI ID

commit 8938fc7b8fe9ccfa11751ead502a8d385b607967 upstream.

Add ELAN0618 to the list of supported touchpads; this ID is used in
Lenovo v330 15IKB devices.

Signed-off-by: Alexandr Savca <alexandr.savca@saltedge.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI / LPSS: Add missing prv_offset setting for byt/cht PWM devices

commit fdcb613d49321b5bf5d5a1bd0fba8e7c241dcc70 upstream.

The LPSS PWM device on on Bay Trail and Cherry Trail devices has a set
of private registers at offset 0x800, the current lpss_device_desc for
them already sets the LPSS_SAVE_CTX flag to have these saved/restored
over device-suspend, but the current lpss_device_desc was not setting
the prv_offset field, leading to the regular device registers getting
saved/restored instead.

This is causing the PWM controller to no longer work, resulting in a black
screen,  after a suspend/resume on systems where the firmware clears the
APB clock and reset bits at offset 0x804.

This commit fixes this by properly setting prv_offset to 0x800 for
the PWM devices.

Cc: stable@vger.kernel.org
Fixes: e1c748179754 ("ACPI / LPSS: Add Intel BayTrail ACPI mode PWM")
Fixes: 1bfbd8eb8a7f ("ACPI / LPSS: Add ACPI IDs for Intel Braswell")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rafael J . Wysocki <rjw@rjwysocki.net>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

video: uvesafb: Fix integer overflow in allocation

commit 9f645bcc566a1e9f921bdae7528a01ced5bc3713 upstream.

cmap->len can get close to INT_MAX/2, allowing for an integer overflow in
allocation. This uses kmalloc_array() instead to catch the condition.

Reported-by: Dr Silvio Cesare of InfoSect <silvio.cesare@gmail.com>
Fixes: 8bdb3a2d7df48 ("uvesafb: the driver core")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSv4: Fix a typo in nfs41_sequence_process

commit 995891006ccbb73c0c9c3923cf9d25c4d07ec16b upstream.

We want to compare the slot_id to the highest slot number advertised by the
server.

Fixes: 3be0f80b5fe9c ("NFSv4.1: Fix up replays of interrupted requests")
Cc: stable@vger.kernel.org # 4.15+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSv4: Revert commit 5f83d86cf531d ("NFSv4.x: Fix wraparound issues..")

commit fc40724fc6731d90cc7fb6d62d66135f85a33dd2 upstream.

The correct behaviour for NFSv4 sequence IDs is to wrap around
to the value 0 after 0xffffffff.
See https://tools.ietf.org/html/rfc5661#section-2.10.6.1

Fixes: 5f83d86cf531d ("NFSv4.x: Fix wraparound issues when validing...")
Cc: stable@vger.kernel.org # 4.6+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSv4: Fix possible 1-byte stack overflow in nfs_idmap_read_and_verify_message

commit d68894800ec5712d7ddf042356f11e36f87d7f78 upstream.

In nfs_idmap_read_and_verify_message there is an incorrect sprintf '%d'
that converts the __u32 'im_id' from struct idmap_msg to 'id_str', which
is a stack char array variable of length NFS_UINT_MAXLEN == 11.
If a uid or gid value is > 2147483647 = 0x7fffffff, the conversion
overflows into a negative value, for example:
crash> p (unsigned) (0x80000000)
$1 = 2147483648
crash> p (signed) (0x80000000)
$2 = -2147483648
The '-' sign is written to the buffer and this causes a 1 byte overflow
when the NULL byte is written, which corrupts kernel stack memory.  If
CONFIG_CC_STACKPROTECTOR_STRONG is set we see a stack-protector panic:

[11558053.616565] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffffa05b8a8c
[11558053.639063] CPU: 6 PID: 9423 Comm: rpc.idmapd Tainted: G        W      ------------ T 3.10.0-514.el7.x86_64 #1
[11558053.641990] Hardware name: Red Hat OpenStack Compute, BIOS 1.10.2-3.el7_4.1 04/01/2014
[11558053.644462]  ffffffff818c7bc0 00000000b1f3aec1 ffff880de0f9bd48 ffffffff81685eac
[11558053.646430]  ffff880de0f9bdc8 ffffffff8167f2b3 ffffffff00000010 ffff880de0f9bdd8
[11558053.648313]  ffff880de0f9bd78 00000000b1f3aec1 ffffffff811dcb03 ffffffffa05b8a8c
[11558053.650107] Call Trace:
[11558053.651347]  [<ffffffff81685eac>] dump_stack+0x19/0x1b
[11558053.653013]  [<ffffffff8167f2b3>] panic+0xe3/0x1f2
[11558053.666240]  [<ffffffff811dcb03>] ? kfree+0x103/0x140
[11558053.682589]  [<ffffffffa05b8a8c>] ? idmap_pipe_downcall+0x1cc/0x1e0 [nfsv4]
[11558053.689710]  [<ffffffff810855db>] __stack_chk_fail+0x1b/0x30
[11558053.691619]  [<ffffffffa05b8a8c>] idmap_pipe_downcall+0x1cc/0x1e0 [nfsv4]
[11558053.693867]  [<ffffffffa00209d6>] rpc_pipe_write+0x56/0x70 [sunrpc]
[11558053.695763]  [<ffffffff811fe12d>] vfs_write+0xbd/0x1e0
[11558053.702236]  [<ffffffff810acccc>] ? task_work_run+0xac/0xe0
[11558053.704215]  [<ffffffff811fec4f>] SyS_write+0x7f/0xe0
[11558053.709674]  [<ffffffff816964c9>] system_call_fastpath+0x16/0x1b

Fix this by calling the internally defined nfs_map_numeric_to_string()
function which properly uses '%u' to convert this __u32.  For consistency,
also replace the one other place where snprintf is called.

Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Reported-by: Stephen Johnston <sjohnsto@redhat.com>
Fixes: cf4ab538f1516 ("NFSv4: Fix the string length returned by the idmapper")
Cc: stable@vger.kernel.org # v3.4+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: restrict rd_maxcount to svc_max_payload in nfsd_encode_readdir

commit 9c2ece6ef67e9d376f32823086169b489c422ed0 upstream.

nfsd4_readdir_rsize restricts rd_maxcount to svc_max_payload when
estimating the size of the readdir reply, but nfsd_encode_readdir
restricts it to INT_MAX when encoding the reply.  This can result in log
messages like "kernel: RPC request reserved 32896 but used 1049444".

Restrict rd_dircount similarly (no reason it should be larger than
svc_max_payload).

Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: dvb_frontend: fix locking issues at dvb_frontend_get_event()

commit 76d81243a487c09619822ef8e7201a756e58a87d upstream.

As warned by smatch:
drivers/media/dvb-core/dvb_frontend.c:314 dvb_frontend_get_event() warn: inconsistent returns 'sem:&fepriv->sem'.
  Locked on:   line 288
               line 295
               line 306
               line 314
  Unlocked on: line 303

The lock implementation for get event is wrong, as, if an
interrupt occurs, down_interruptible() will fail, and the
routine will call up() twice when userspace calls the ioctl
again.

The bad code is there since when Linux migrated to git, in
2005.

Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: cx231xx: Add support for AverMedia DVD EZMaker 7

commit 29e61d6ef061b012d320327af7dbb3990e75be45 upstream.

User reports AverMedia DVD EZMaker 7 can be driven by VIDEO_GRABBER.
Add the device to the id_table to make it work.

BugLink: https://bugs.launchpad.net/bugs/1620762
Cc: stable@vger.kernel.org
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: v4l2-compat-ioctl32: prevent go past max size

commit ea72fbf588ac9c017224dcdaa2019ff52ca56fee upstream.

As warned by smatch:
drivers/media/v4l2-core/v4l2-compat-ioctl32.c:879 put_v4l2_ext_controls32() warn: check for integer overflow 'count'

The access_ok() logic should check for too big arrays too.

Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: vsp1: Release buffers for each video node

commit 83967993f2320575c0ab27a80bf1d7535909c2f4 upstream.

Commit 372b2b0399fc ("media: v4l: vsp1: Release buffers in
start_streaming error path") introduced a helper to clean up buffers on
error paths, but inadvertently changed the code such that only the
output WPF buffers were cleaned, rather than the video node being
operated on.

Since then vsp1_video_cleanup_pipeline() has grown to perform both video
node cleanup, as well as pipeline cleanup. Split the implementation into
two distinct functions that perform the required work, so that each
video node can release its buffers correctly on streamoff. The pipe
cleanup that was performed in the vsp1_video_stop_streaming() (releasing
the pipe->dl) is moved to the function for clarity.

Fixes: 372b2b0399fc ("media: v4l: vsp1: Release buffers in start_streaming error path")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/intel/uncore: Add event constraint for BDX PCU

commit bb9fbe1b57503f790dbbf9f06e72cb0fb9e60740 upstream.

Event select bit 7 'Use Occupancy' in PCU Box is not available for
counter 0 on BDX

Add a constraint to fix it.

Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: peterz@infradead.org
Cc: ak@linux.intel.com
Link: https://lkml.kernel.org/r/1510668400-301000-1-git-send-email-kan.liang@intel.com
Cc: "Jin, Yao" <yao.jin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf vendor events: Add Goldmont Plus V1 event file

commit 65db92e0965ab56e8031d5c804f26d5be0e47047 upstream.

Add a Intel event file for perf.

Signed-off-by: Kan Liang <Kan.liang@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1508331907-395162-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "Jin, Yao" <yao.jin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf intel-pt: Fix packet decoding of CYC packets

commit 621a5a327c1e36ffd7bb567f44a559f64f76358f upstream.

Use a 64-bit type so that the cycle count is not limited to 32-bits.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1528371002-8862-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf intel-pt: Fix "Unexpected indirect branch" error

commit 9fb523363f6e3984457fee95bb7019395384ffa7 upstream.

Some Atom CPUs can produce FUP packets that contain NLIP (next linear
instruction pointer) instead of CLIP (current linear instruction
pointer).  That will result in "Unexpected indirect branch" errors. Fix
by comparing IP to NLIP in that case.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1527762225-26024-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf intel-pt: Fix MTC timing after overflow

commit dd27b87ab5fcf3ea1c060b5e3ab5d31cc78e9f4c upstream.

On some platforms, overflows will clear before MTC wraparound, and there
is no following TSC/TMA packet. In that case the previous TMA is valid.
Since there will be a valid TMA either way, stop setting 'have_tma' to
false upon overflow.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1527762225-26024-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf intel-pt: Fix decoding to accept CBR between FUP and corresponding TIP

commit bd2e49ec48feb1855f7624198849eea4610e2286 upstream.

It is possible to have a CBR packet between a FUP packet and
corresponding TIP packet. Stop treating it as an error.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1527762225-26024-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf intel-pt: Fix sync_switch INTEL_PT_SS_NOT_TRACING

commit dbcb82b93f3e8322891e47472c89e63058b81e99 upstream.

sync_switch is a facility to synchronize decoding more closely with the
point in the kernel when the context actually switched.

In one case, INTEL_PT_SS_NOT_TRACING state was not correctly
transitioning to INTEL_PT_SS_TRACING state due to a missing case clause.
Add it.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1527762225-26024-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf tools: Fix symbol and object code resolution for vdso32 and vdsox32

commit aef4feace285f27c8ed35830a5d575bec7f3e90a upstream.

Fix __kmod_path__parse() so that perf tools does not treat vdso32 and
vdsox32 as kernel modules and fail to find the object.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: stable@vger.kernel.org
Fixes: 1f121b03d058 ("perf tools: Deal with kernel module names in '[]' correctly")
Link: http://lkml.kernel.org/r/1528117014-30032-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm: dts: mt7623: fix invalid memory node being generated

commit c0b0d540db1a8bfb041166c4991dd6f624e8de45 upstream.

Below two wrong nodes in existing DTS files would cause a fail boot since
in fact the address 0 is not the correct place the memory device locates
at.

memory {
        device_type = "memory";
        reg = <0x0 0x0 0x0 0x0>;
};

memory@80000000 {
        reg = <0x0 0x80000000 0x0 0x40000000>;
};

In order to avoid having a memory node starting at address 0, we can't
include file skeleton64.dtsi and instead need to explicitly manually
define a few of properties the DTS relies on such as #address-cells
and #size-cells in root node and device_type in the node memory@80000000.

Cc: stable@vger.kernel.org
Fixes: 31ac0d69a1d4 ("ARM: dts: mediatek: add MT7623 basic support")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mfd: intel-lpss: Fix Intel Cannon Lake LPSS I2C input clock

commit 4e93a658576ab115977225c9d0992b97ff19ba8c upstream.

Intel Cannon Lake PCH has much higher 216 MHz input clock to LPSS I2C
than Sunrisepoint which uses 120 MHz. Preliminary information was that
both share the same clock rate but actual silicon implements elevated
rate for better support for 3.4 MHz high-speed I2C.

This incorrect input clock rate results too high I2C bus clock in case
ACPI doesn't provide tuned I2C timing parameters since I2C host
controller driver calculates them from input clock rate.

Fix this by using the correct rate. We still share the same 230 ns SDA
hold time value than Sunrisepoint.

Cc: stable@vger.kernel.org
Fixes: b418bbff36dd ("mfd: intel-lpss: Add Intel Cannonlake PCI IDs")
Reported-by: Jian-Hong Pan <jian-hong@endlessm.com>
Reported-by: Chris Chiu <chiu@endlessm.com>
Reported-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mfd: intel-lpss: Program REMAP register in PIO mode

commit d28b62520830b2d0bffa2d98e81afc9f5e537e8b upstream.

According to documentation REMAP register has to be programmed in
either DMA or PIO mode of the slice.

Move the DMA capability check below to let REMAP register be programmed
in PIO mode.

Cc: stable@vger.kernel.org # 4.3+
Fixes: 4b45efe85263 ("mfd: Add support for Intel Sunrisepoint LPSS devices")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

backlight: tps65217_bl: Fix Device Tree node lookup

commit 2b12dfa124dbadf391cb9a616aaa6b056823bf75 upstream.

Fix child-node lookup during probe, which ended up searching the whole
device tree depth-first starting at the parent rather than just matching
on its children.

This would only cause trouble if the child node is missing while there
is an unrelated node named "backlight" elsewhere in the tree.

Cc: stable <stable@vger.kernel.org> # 3.7
Fixes: eebfdc17cc6c ("backlight: Add TPS65217 WLED driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

backlight: max8925_bl: Fix Device Tree node lookup

commit d1cc0ec3da23e44c23712579515494b374f111c9 upstream.

Fix child-node lookup during probe, which ended up searching the whole
device tree depth-first starting at the parent rather than just matching
on its children.

To make things worse, the parent mfd node was also prematurely freed,
while the child backlight node was leaked.

Cc: stable <stable@vger.kernel.org> # 3.9
Fixes: 47ec340cb8e2 ("mfd: max8925: Support dt for backlight")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

backlight: as3711_bl: Fix Device Tree node lookup

commit 4a9c8bb2aca5b5a2a15744333729745dd9903562 upstream.

Fix child-node lookup during probe, which ended up searching the whole
device tree depth-first starting at the parent rather than just matching
on its children.

To make things worse, the parent mfd node was also prematurely freed.

Cc: stable <stable@vger.kernel.org> # 3.10
Fixes: 59eb2b5e57ea ("drivers/video/backlight/as3711_bl.c: add OF support")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

UBIFS: Fix potential integer overflow in allocation

commit 353748a359f1821ee934afc579cf04572406b420 upstream.

There is potential for the size and len fields in ubifs_data_node to be
too large causing either a negative value for the length fields or an
integer overflow leading to an incorrect memory allocation. Likewise,
when the len field is small, an integer underflow may occur.

Signed-off-by: Silvio Cesare <silvio.cesare@gmail.com>
Fixes: 1e51764a3c2ac ("UBIFS: add new flash file system")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ubi: fastmap: Correctly handle interrupted erasures in EBA

commit 781932375ffc6411713ee0926ccae8596ed0261c upstream.

Fastmap cannot track the LEB unmap operation, therefore it can
happen that after an interrupted erasure the mapping still looks
good from Fastmap's point of view, while reading from the PEB will
cause an ECC error and confuses the upper layer.

Instead of teaching users of UBI how to deal with that, we read back
the VID header and check for errors. If the PEB is empty or shows ECC
errors we fixup the mapping and schedule the PEB for erasure.

Fixes: dbb7d2a88d2a ("UBI: Add fastmap core")
Cc: <stable@vger.kernel.org>
Reported-by: martin bayern <Martinbayern@outlook.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ubi: fastmap: Cancel work upon detach

commit 6e7d80161066c99d12580d1b985cb1408bb58cf1 upstream.

Ben Hutchings pointed out that 29b7a6fa1ec0 ("ubi: fastmap: Don't flush
fastmap work on detach") does not really fix the problem, it just
reduces the risk to hit the race window where fastmap work races against
free()'ing ubi->volumes[].

The correct approach is making sure that no more fastmap work is in
progress before we free ubi data structures.
So we cancel fastmap work right after the ubi background thread is
stopped.
By setting ubi->thread_enabled to zero we make sure that no further work
tries to wake the thread.

Fixes: 29b7a6fa1ec0 ("ubi: fastmap: Don't flush fastmap work on detach")
Fixes: 74cdaf24004a ("UBI: Fastmap: Fix memory leaks while closing the WL sub-system")
Cc: stable@vger.kernel.org
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Martin Townsend <mtownsend1973@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rpmsg: smd: do not use mananged resources for endpoints and channels

commit 4a2e84c6ed85434ce7843e4844b4d3263f7e233b upstream.

All the managed resources would be freed by the time release function
is invoked. Handling such memory in qcom_smd_edge_release() would do
bad things.

Found this issue while testing Audio usecase where the dsp is started up
and shutdown in a loop.

This patch fixes this issue by using simple kzalloc for allocating
channel->name and channel which is then freed in qcom_smd_edge_release().

Without this patch restarting a remoteproc would crash the system.
Fixes: 53e2822e56c7 ("rpmsg: Introduce Qualcomm SMD backend")
Cc: <stable@vger.kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md: fix two problems with setting the "re-add" device state.

commit 011abdc9df559ec75779bb7c53a744c69b2a94c6 upstream.

If "re-add" is written to the "state" file for a device
which is faulty, this has an effect similar to removing
and re-adding the device.  It should take up the
same slot in the array that it previously had, and
an accelerated (e.g. bitmap-based) rebuild should happen.

The slot that "it previously had" is determined by
rdev->saved_raid_disk.
However this is not set when a device fails (only when a device
is added), and it is cleared when resync completes.
This means that "re-add" will normally work once, but may not work a
second time.

This patch includes two fixes.
1/ when a device fails, record the ->raid_disk value in
    ->saved_raid_disk before clearing ->raid_disk
2/ when "re-add" is written to a device for which
    ->saved_raid_disk is not set, fail.

I think this is suitable for stable as it can
cause re-adding a device to be forced to do a full
resync which takes a lot longer and so puts data at
more risk.

Cc: <stable@vger.kernel.org> (v4.1)
Fixes: 97f6cd39da22 ("md-cluster: re-add capabilities")
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: sun6i: Fix bit_idx value for clk_register_gate

commit 09018d4bd7994c2c9f775029bc24589bc85f76fa upstream.

clk-gate core will take bit_idx through clk_register_gate
and then do clk_gate_ops by using BIT(bit_idx), but rtc-sun6i
is passing bit_idx as BIT(bit_idx) it becomes BIT(BIT(bit_idx)
which is wrong and eventually external gate clock is not enabling.

This patch fixed by passing bit index and the original change
introduced from below commit.
"rtc: sun6i: Add support for the external oscillator gate"
(sha1:  17ecd246414b3a0fe0cb248c86977a8bda465b7b)

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Fixes: 17ecd246414b ("rtc: sun6i: Add support for the external oscillator gate")
Cc: stable@vger.kernel.org
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: at91: PLL recalc_rate() now using cached MUL and DIV values

commit a982e45dc150da3a08907b6dd676b735391704b4 upstream.

When a USB device is connected to the USB host port on the SAM9N12 then
you get "-62" error which seems to indicate USB replies from the device
are timing out. Based on a logic sniffer, I saw the USB bus was running
at half speed.

The PLL code uses cached MUL and DIV values which get set in set_rate()
and applied in prepare(), but the recalc_rate() function instead
queries the hardware instead of using these cached values. Therefore,
if recalc_rate() is called between a set_rate() and prepare(), the
wrong frequency is calculated and later the USB clock divider for the
SAM9N12 SOC will be configured for an incorrect clock.

In my case, the PLL hardware was set to 96 Mhz before the OHCI
driver loads, and therefore the usb clock divider was being set
to /2 even though the OHCI driver set the PLL to 48 Mhz.

As an alternative explanation, I noticed this was fixed in the past by
87e2ed338f1b ("clk: at91: fix recalc_rate implementation of PLL
driver") but the bug was later re-introduced by 1bdf02326b71 ("clk:
at91: make use of syscon/regmap internally").

Fixes: 1bdf02326b71 ("clk: at91: make use of syscon/regmap internally)
Cc: <stable@vger.kernel.org>
Signed-off-by: Marcin Ziemianowicz <marcin@ziemianowicz.com>
Acked-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

linvdimm, pmem: Preserve read-only setting for pmem devices

commit 254a4cd50b9fe2291a12b8902e08e56dcc4e9b10 upstream.

The pmem driver does not honor a forced read-only setting for very long:
$ blockdev --setro /dev/pmem0
$ blockdev --getro /dev/pmem0
1

followed by various commands like these:
$ blockdev --rereadpt /dev/pmem0
or
$ mkfs.ext4 /dev/pmem0

results in this in the kernel serial log:
 nd_pmem namespace0.0: region0 read-write, marking pmem0 read-write

with the read-only setting lost:
$ blockdev --getro /dev/pmem0
0

That's from bus.c nvdimm_revalidate_disk(), which always applies the
setting from nd_region (which is initially based on the ACPI NFIT
NVDIMM state flags not_armed bit).

In contrast, commit 20bd1d026aac ("scsi: sd: Keep disk read-only when
re-reading partition") fixed this issue for SCSI devices to preserve
the previous setting if it was set to read-only.

This patch modifies bus.c to preserve any previous read-only setting.
It also eliminates the kernel serial log print except for cases where
read-write is changed to read-only, so it doesn't print read-only to
read-only non-changes.

Cc: <stable@vger.kernel.org>
Fixes: 581388209405 ("libnvdimm, nfit: handle unarmed dimms, mark namespaces read-only")
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: zfcp: fix missing REC trigger trace on enqueue without ERP thread

commit 6a76550841d412330bd86aed3238d1888ba70f0e upstream.

Example trace record formatted with zfcpdbf from s390-tools:

Timestamp      : ...
Area           : REC
Subarea        : 00
Level          : 1
Exception      : -
CPU ID         : ..
Caller         : 0x...
Record ID      : 1                      ZFCP_DBF_REC_TRIG
Tag            : .......
LUN            : 0x...
WWPN           : 0x...
D_ID           : 0x...
Adapter status : 0x...
Port status    : 0x...
LUN status     : 0x...
Ready count    : 0x...
Running count  : 0x...
ERP want       : 0x0.                   ZFCP_ERP_ACTION_REOPEN_...
ERP need       : 0xc0                   ZFCP_ERP_ACTION_NONE

Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Cc: <stable@vger.kernel.org> #2.6.38+
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: zfcp: fix missing REC trigger trace for all objects in ERP_FAILED

commit 8c3d20aada70042a39c6a6625be037c1472ca610 upstream.

That other commit introduced an inconsistency because it would trace on
ERP_FAILED for all callers of port forced reopen triggers (not just
terminate_rport_io), but it would not trace on ERP_FAILED for all callers of
other ERP triggers such as adapter, port regular, LUN.

Therefore, generalize that other commit. zfcp_erp_action_enqueue() already
had two early outs which re-used the one zfcp_dbf_rec_trig() call.  All ERP
trigger functions finally run through zfcp_erp_action_enqueue().  So move
the special handling for ZFCP_STATUS_COMMON_ERP_FAILED into
zfcp_erp_action_enqueue() and add another early out with new trace marker
for pseudo ERP need in this case. This removes all early returns from all
ERP trigger functions so we always end up at zfcp_dbf_rec_trig().

Example trace record formatted with zfcpdbf from s390-tools:

Timestamp      : ...
Area           : REC
Subarea        : 00
Level          : 1
Exception      : -
CPU ID         : ..
Caller         : 0x...
Record ID      : 1                      ZFCP_DBF_REC_TRIG
Tag            : .......
LUN            : 0x...
WWPN           : 0x...
D_ID           : 0x...
Adapter status : 0x...
Port status    : 0x...
LUN status     : 0x...
Ready count    : 0x...
Running count  : 0x...
ERP want       : 0x0.                   ZFCP_ERP_ACTION_REOPEN_...
ERP need       : 0xe0                   ZFCP_ERP_ACTION_FAILED

Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Cc: <stable@vger.kernel.org> #2.6.38+
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: zfcp: fix missing REC trigger trace on terminate_rport_io for ERP_FAILED

commit d70aab55924b44f213fec2b900b095430b33eec6 upstream.

For problem determination we always want to see when we were invoked on the
terminate_rport_io callback whether we perform something or not.

Temporal event sequence of interest with a long fast_io_fail_tmo of 27 sec:

loose remote port

t   workqueue
[s] zfcp_q_<dev>       IRQ                 zfcperp<dev>

=== ================== =================== ============================

  0                    recv RSCN
                       q p.test_link_work
    block rport
     start fast_io_fail_tmo
    send ADISC ELS
  4                    recv ADISC fail
                       block zfcp_port
                                           port forced reopen
                                           send open port
 12                    recv open port fail
                                           q p.gid_pn_work
                                           zfcp_erp_wakeup
                                           (zfcp_erp_wait would return)
    GID_PN fail

Before this point, we got a SCSI trace with tag "sctrpi1" on fast_io_fail,
e.g. with the typical 5 sec setting.

    port.status |= ERP_FAILED

If fast_io_fail_tmo triggers after this point, we missed a SCSI trace.

    workqueue
    fc_dl_<host>
    ==================
 27 fc_timeout_fail_rport_io
    fc_terminate_rport_io
    zfcp_scsi_terminate_rport_io
    zfcp_erp_port_forced_reopen
    _zfcp_erp_port_forced_reopen
     if (port.status & ERP_FAILED)
      return;

Therefore, write a trace before above early return.

Example trace record formatted with zfcpdbf from s390-tools:

Timestamp      : ...
Area           : REC
Subarea        : 00
Level          : 1
Exception      : -
CPU ID         : ..
Caller         : 0x...
Record ID      : 1                      ZFCP_DBF_REC_TRIG
Tag            : sctrpi1                SCSI terminate rport I/O
LUN            : 0xffffffffffffffff                     none (invalid)
WWPN           : 0x<wwpn>
D_ID           : 0x<n_port_id>
Adapter status : 0x...
Port status    : 0x...
LUN status     : 0x00000000                             none (invalid)
Ready count    : 0x...
Running count  : 0x...
ERP want       : 0x03                   ZFCP_ERP_ACTION_REOPEN_PORT_FORCED
ERP need       : 0xe0                   ZFCP_ERP_ACTION_FAILED

Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Cc: <stable@vger.kernel.org> #2.6.38+
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: zfcp: fix missing REC trigger trace on terminate_rport_io early return

commit 96d9270499471545048ed8a6d7f425a49762283d upstream.

get_device() and its internally used kobject_get() only return NULL if they
get passed NULL as argument. zfcp_get_port_by_wwpn() loops over
adapter->port_list so the iteration variable port is always non-NULL.
Struct device is embedded in struct zfcp_port so &port->dev is always
non-NULL. This is the argument to get_device().  However, if we get an
fc_rport in terminate_rport_io() for which we cannot find a match within
zfcp_get_port_by_wwpn(), the latter can return NULL.  v2.6.30 commit
70932935b61e ("[SCSI] zfcp: Fix oops when port disappears") introduced an
early return without adding a trace record for this case.  Even if we don't
need recovery in this case, for debugging we should still see that our
callback was invoked originally by scsi_transport_fc.

Example trace record formatted with zfcpdbf from s390-tools:

Timestamp      : ...
Area           : REC
Subarea        : 00
Level          : 1
Exception      : -
CPU ID         : ..
Caller         : 0x...
Record ID      : 1
Tag            : sctrpin        SCSI terminate rport I/O, no zfcp port
LUN            : 0xffffffffffffffff                     none (invalid)
WWPN           : 0x<wwpn>               WWPN
D_ID           : 0x<n_port_id>          N_Port-ID
Adapter status : 0x...
Port status    : 0xffffffff             unknown (-1)
LUN status     : 0x00000000                             none (invalid)
Ready count    : 0x...
Running count  : 0x...
ERP want       : 0x03                   ZFCP_ERP_ACTION_REOPEN_PORT_FORCED
ERP need       : 0xc0                   ZFCP_ERP_ACTION_NONE

Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Fixes: 70932935b61e ("[SCSI] zfcp: Fix oops when port disappears")
Cc: <stable@vger.kernel.org> #2.6.38+
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: zfcp: fix misleading REC trigger trace where erp_action setup failed

commit 512857a795cbbda5980efa4cdb3c0b6602330408 upstream.

If a SCSI device is deleted during scsi_eh host reset, we cannot get a
reference to the SCSI device anymore since scsi_device_get returns !=0 by
design. Assuming the recovery of adapter and port(s) was successful,
zfcp_erp_strategy_followup_success() attempts to trigger a LUN reset for the
half-gone SCSI device. Unfortunately, it causes the following confusing
trace record which states that zfcp will do a LUN recovery as "ERP need" is
ZFCP_ERP_ACTION_REOPEN_LUN == 1 and equals "ERP want".

Old example trace record formatted with zfcpdbf from s390-tools:

Tag:           : ersfs_3 ERP, trigger, unit reopen, port reopen succeeded
LUN            : 0x<FCP_LUN>
WWPN           : 0x<WWPN>
D_ID           : 0x<N_Port-ID>
Adapter status : 0x5400050b
Port status    : 0x54000001
LUN status     : 0x40000000     ZFCP_STATUS_COMMON_RUNNING
                                but not ZFCP_STATUS_COMMON_UNBLOCKED as it
                                was closed on close part of adapter reopen
ERP want       : 0x01
ERP need       : 0x01           misleading

However, zfcp_erp_setup_act() returns NULL as it cannot get the reference.
Hence, zfcp_erp_action_enqueue() takes an early goto out and _NO_ recovery
actually happens.

We always do want the recovery trigger trace record even if no erp_action
could be enqueued as in this case. For other cases where we did not enqueue
an erp_action, 'need' has always been zero to indicate this. In order to
indicate above goto out, introduce an eyecatcher "flag" to mark the "ERP
need" as 'not needed' but still keep the information which erp_action type,
that zfcp_erp_required_act() had decided upon, is needed.  0xc_ is chosen to
be visibly different from 0x0_ in "ERP want".

New example trace record formatted with zfcpdbf from s390-tools:

Tag:           : ersfs_3 ERP, trigger, unit reopen, port reopen succeeded
LUN            : 0x<FCP_LUN>
WWPN           : 0x<WWPN>
D_ID           : 0x<N_Port-ID>
Adapter status : 0x5400050b
Port status    : 0x54000001
LUN status     : 0x40000000
ERP want       : 0x01
ERP need       : 0xc1           would need LUN ERP, but no action set up
                   ^

Before v2.6.38 commit ae0904f60fab ("[SCSI] zfcp: Redesign of the debug
tracing for recovery actions.") we could detect this case because the
"erp_action" field in the trace was NULL. The rework removed erp_action as
argument and field from the trace.

This patch here is for tracing. A fix to allow LUN recovery in the case at
hand is a topic for a separate patch.

See also commit fdbd1c5e27da ("[SCSI] zfcp: Allow running unit/LUN shutdown
without acquiring reference") for a similar case and background info.

Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Fixes: ae0904f60fab ("[SCSI] zfcp: Redesign of the debug tracing for recovery actions.")
Cc: <stable@vger.kernel.org> #2.6.38+
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: zfcp: fix missing SCSI trace for retry of abort / scsi_eh TMF

commit 81979ae63e872ef650a7197f6ce6590059d37172 upstream.

We already have a SCSI trace for the end of abort and scsi_eh TMF. Due to
zfcp_erp_wait() and fc_block_scsi_eh() time can pass between the start of
our eh callback and an actual send/recv of an abort / TMF request.  In order
to see the temporal sequence including any abort / TMF send retries, add a
trace before the above two blocking functions.  This supports problem
determination with scsi_eh and parallel zfcp ERP.

No need to explicitly trace the beginning of our eh callback, since we
typically can send an abort / TMF and see its HBA response (in the worst
case, it's a pseudo response on dismiss all of adapter recovery, e.g. due to
an FSF request timeout [fsrth_1] of the abort / TMF). If we cannot send, we
now get a trace record for the first "abrt_wt" or "[lt]r_wait" which denotes
almost the beginning of the callback.

No need to explicitly trace the wakeup after the above two blocking
functions because the next retry loop causes another trace in any case and
that is sufficient.

Example trace records formatted with zfcpdbf from s390-tools:

Timestamp      : ...
Area           : SCSI
Subarea        : 00
Level          : 1
Exception      : -
CPU ID         : ..
Caller         : 0x...
Record ID      : 1
Tag            : abrt_wt        abort, before zfcp_erp_wait()
Request ID     : 0x0000000000000000                     none (invalid)
SCSI ID        : 0x<scsi_id>
SCSI LUN       : 0x<scsi_lun>
SCSI LUN high  : 0x<scsi_lun_high>
SCSI result    : 0x<scsi_result_of_cmd_to_be_aborted>
SCSI retries   : 0x<retries_of_cmd_to_be_aborted>
SCSI allowed   : 0x<allowed_retries_of_cmd_to_be_aborted>
SCSI scribble  : 0x<req_id_of_cmd_to_be_aborted>
SCSI opcode    : <CDB_of_cmd_to_be_aborted>
FCP rsp inf cod: 0x..                                   none (invalid)
FCP rsp IU     : ...                                    none (invalid)

Timestamp      : ...
Area           : SCSI
Subarea        : 00
Level          : 1
Exception      : -
CPU ID         : ..
Caller         : 0x...
Record ID      : 1
Tag            : lr_wait        LUN reset, before zfcp_erp_wait()
Request ID     : 0x0000000000000000                     none (invalid)
SCSI ID        : 0x<scsi_id>
SCSI LUN       : 0x<scsi_lun>
SCSI LUN high  : 0x<scsi_lun_high>
SCSI result    : 0x...                                  unrelated
SCSI retries   : 0x..                                   unrelated
SCSI allowed   : 0x..                                   unrelated
SCSI scribble  : 0x...                                  unrelated
SCSI opcode    : ...                                    unrelated
FCP rsp inf cod: 0x..                                   none (invalid)
FCP rsp IU     : ...                                    none (invalid)

Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Fixes: 63caf367e1c9 ("[SCSI] zfcp: Improve reliability of SCSI eh handlers in zfcp")
Fixes: af4de36d911a ("[SCSI] zfcp: Block scsi_eh thread for rport state BLOCKED")
Cc: <stable@vger.kernel.org> #2.6.38+
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: zfcp: fix missing SCSI trace for result of eh_host_reset_handler

commit df30781699f53e4fd4c494c6f7dd16e3d5c21d30 upstream.

For problem determination we need to see whether and why we were successful
or not. This allows deduction of scsi_eh escalation.

Example trace record formatted with zfcpdbf from s390-tools:

Timestamp      : ...
Area           : SCSI
Subarea        : 00
Level          : 1
Exception      : -
CPU ID         : ..
Caller         : 0x...
Record ID      : 1
Tag            : schrh_r        SCSI host reset handler result
Request ID     : 0x0000000000000000                     none (invalid)
SCSI ID        : 0xffffffff                             none (invalid)
SCSI LUN       : 0xffffffff                             none (invalid)
SCSI LUN high  : 0xffffffff                             none (invalid)
SCSI result    : 0x00002002     field re-used for midlayer value: SUCCESS
                                or in other cases: 0x2009 == FAST_IO_FAIL
SCSI retries   : 0xff                                   none (invalid)
SCSI allowed   : 0xff                                   none (invalid)
SCSI scribble  : 0xffffffffffffffff                     none (invalid)
SCSI opcode    : ffffffff ffffffff ffffffff ffffffff    none (invalid)
FCP rsp inf cod: 0xff                                   none (invalid)
FCP rsp IU     : 00000000 00000000 00000000 00000000    none (invalid)
                 00000000 00000000

v2.6.35 commit a1dbfddd02d2 ("[SCSI] zfcp: Pass return code from
fc_block_scsi_eh to scsi eh") introduced the first return with something
other than the previously hardcoded single SUCCESS return path.

Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Fixes: a1dbfddd02d2 ("[SCSI] zfcp: Pass return code from fc_block_scsi_eh to scsi eh")
Cc: <stable@vger.kernel.org> #2.6.38+
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Mask off Scope bits in retry delay

commit 3cedc8797b9c0f2222fd45a01f849c57c088828b upstream.

Some newer target uses "Status Qualifier" response in a returned "Busy
Status". This new response code of 0x4001, which is "Scope" bits,
translates to "Affects all units accessible by target".  Due to this new
value returned in the Scope bits, driver was using that value as timeout
value which resulted into driver waiting for 27min timeout.

This patch masks off this Scope bits so that driver does not use this
value as retry delay time.

Cc: <stable@vger.kernel.org>
Signed-off-by: Anil Gurumurthy <anil.gurumurthy@cavium.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Fix setting lower transfer speed if GPSC fails

commit 413c2f33489b134e3cc65d9c3ff7861e8fdfe899 upstream.

This patch prevents driver from setting lower default speed of 1 GB/sec,
if the switch does not support Get Port Speed Capabilities (GPSC)
command. Setting this default speed results into much lower write
performance for large sequential WRITE.  This patch modifies driver to
check for gpsc_supported flags and prevents driver from issuing
MBC_SET_PORT_PARAM (001Ah) to set default speed of 1 GB/sec. If driver
does not send this mailbox command, firmware assumes maximum supported
link speed and will operate at the max speed.

Cc: stable@vger.kernel.org
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reported-by: Eda Zhou <ezhou@redhat.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Tested-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: hpsa: disable device during shutdown

commit 0d98ba8d70b0070ac117452ea0b663e26bbf46bf upstream.

'Commit cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during
shutdown")' has been added to kernel to shutdown pending PCIe port service
interrupts during reboot so that a newly started kexec kernel wouldn't
observe pending interrupts.

pcie_port_device_remove() is disabling the root port and switches by
calling pci_disable_device() after all PCIe service drivers are shutdown.

This has been found to cause crashes on HP DL360 Gen9 machines during
reboot due to hpsa driver not clearing the bus master bit during the
shutdown procedure by calling pci_disable_device().

Disable device as part of the shutdown sequence.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=199779
Fixes: cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown")
Cc: stable@vger.kernel.org
Reported-by: Ryan Finnie <ryan@finnie.org>
Tested-by: Don Brace <don.brace@microsemi.com>
Acked-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: fix __gup_device_huge vs unmap

commit a9b6de77b1a3ff729f7bfc54b2e17711776a416c upstream.

get_user_pages_fast() for device pages is missing the typical validation
that all page references have been taken while the mapping was valid.
Without this validation truncate operations can not reliably coordinate
against new page reference events like O_DIRECT.

Cc: <stable@vger.kernel.org>
Fixes: 3565fce3a659 ("mm, x86: get_user_pages() for dax mappings")
Reported-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: sca3000: Fix an error handling path in 'sca3000_probe()'

commit 4a5b45383ca371e123ba103d34d4b3b87616245c upstream.

Use 'devm_iio_kfifo_allocate()' instead of 'iio_kfifo_allocate()' in order
to simplify code and avoid a memory leak in an error path in
'sca3000_probe()'. A call to 'sca3000_unconfigure_ring()' was missing.

Sent via the next merge window as unimportant bug and there are
other patches dependent on it.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: ad7791: remove sample freq sysfs attributes

commit 7eb6b35d93c356f1afebbfb808bc296d6351e708 upstream.

In the current state, these attributes are broken, because they are
registered already, and the kernel throws a warning.
The first registration happens via the `IIO_CHAN_INFO_SAMP_FREQ` flag from
the `ad_sigma_delta` driver.

In this commit these attrs are removed, and in the following the
IIO_CHAN_INFO_SAMP_FREQ behavior will be implemented, which replaces these
hooks.

This is done to make things a bit easier to review as there is a bit of
overlap in the patch if it's done all at once.

Fixes: a13e831fcaa7 ("staging: iio: ad7192: implement IIO_CHAN_INFO_SAMP_FREQ")
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: fix return value on rename exchange failure

commit c5b4a50b74018b3677098151ec5f4fce07d5e6a0 upstream.

If we failed during a rename exchange operation after starting/joining a
transaction, we would end up replacing the return value, stored in the
local 'ret' variable, with the return value from btrfs_end_transaction().
So this could end up returning 0 (success) to user space despite the
operation having failed and aborted the transaction, because if there are
multiple tasks having a reference on the transaction at the time
btrfs_end_transaction() is called by the rename exchange, that function
returns 0 (otherwise it returns -EIO and not the original error value).
So fix this by not overwriting the return value on error after getting
a transaction handle.

Fixes: cdd1fedf8261 ("btrfs: add support for RENAME_EXCHANGE and RENAME_WHITEOUT")
CC: stable@vger.kernel.org # 4.9+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

X.509: unpack RSA signatureValue field from BIT STRING

commit b65c32ec5a942ab3ada93a048089a938918aba7f upstream.

The signatureValue field of a X.509 certificate is encoded as a BIT STRING.
For RSA signatures this BIT STRING is of so-called primitive subtype, which
contains a u8 prefix indicating a count of unused bits in the encoding.

We have to strip this prefix from signature data, just as we already do for
key data in x509_extract_key_data() function.

This wasn't noticed earlier because this prefix byte is zero for RSA key
sizes divisible by 8. Since BIT STRING is a big-endian encoding adding zero
prefixes has no bearing on its value.

The signature length, however was incorrect, which is a problem for RSA
implementations that need it to be exactly correct (like AMD CCP).

Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Fixes: c26fd69fa009 ("X.509: Add a crypto key parser for binary (DER) X.509 certificates")
Cc: stable@vger.kernel.org
Signed-off-by: James Morris <james.morris@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqchip/gic-v3-its: Don't bind LPI to unavailable NUMA node

commit c1797b11a09c8323c92b074fd48b89a936c991d0 upstream.

On a NUMA system, if an ITS is local to an offline node, the ITS driver may
pick an offline CPU to bind the LPI.  In this case, pick an online CPU (and
the first one will do).

But on some systems, binding an LPI to non-local node CPU may cause
deadlock (see Cavium erratum 23144).  In this case, just fail the activate
and return an error code.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Sumit Garg <sumit.garg@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180622095254.5906-5-marc.zyngier@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

time: Make sure jiffies_to_msecs() preserves non-zero time periods

commit abcbcb80cd09cd40f2089d912764e315459b71f7 upstream.

For the common cases where 1000 is a multiple of HZ, or HZ is a multiple of
1000, jiffies_to_msecs() never returns zero when passed a non-zero time
period.

However, if HZ > 1000 and not an integer multiple of 1000 (e.g. 1024 or
1200, as used on alpha and DECstation), jiffies_to_msecs() may return zero
for small non-zero time periods.  This may break code that relies on
receiving back a non-zero value.

jiffies_to_usecs() does not need such a fix: one jiffy can only be less
than one µs if HZ > 1000000, and such large values of HZ are already
rejected at build time, twice:

  - include/linux/jiffies.h does #error if HZ >= 12288,
  - kernel/time/time.c has BUILD_BUG_ON(HZ > USEC_PER_SEC).

Broken since forever.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-alpha@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180622143357.7495-1-geert@linux-m68k.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: io: Add barrier after register read in inX()

commit 18f3e95b90b28318ef35910d21c39908de672331 upstream.

While a barrier is present in the outX() functions before the register
write, a similar barrier is missing in the inX() functions after the
register read. This could allow memory accesses following inX() to
observe stale data.

This patch is very similar to commit a1cc7034e33d12dc1 ("MIPS: io: Add
barrier after register read in readX()"). Because war_io_reorder_wmb()
is both used by writeX() and outX(), if readX() need a barrier then so
does inX().

Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Patchwork: https://patchwork.linux-mips.org/patch/19516/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <james.hogan@mips.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Huacai Chen <chenhuacai@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: intel_pstate: Fix scaling max/min limits with Turbo 3.0

commit ff7c9917143b3a6cf2fa61212a32d67cf259bf9c upstream.

When scaling max/min settings are changed, internally they are converted
to a ratio using the max turbo 1 core turbo frequency. This works fine
when 1 core max is same irrespective of the core. But under Turbo 3.0,
this will not be the case. For example:
Core 0: max turbo pstate: 43 (4.3GHz)
Core 1: max turbo pstate: 45 (4.5GHz)
In this case 1 core turbo ratio will be maximum of all, so it will be
45 (4.5GHz). Suppose scaling max is set to 4GHz (ratio 40) for all cores
,then on core one it will be
 = max_state * policy->max / max_freq;
 = 43 * (4000000/4500000) = 38 (3.8GHz)
 = 38
which is 200MHz less than the desired.
On core2, it will be correctly set to ratio 40 (4GHz). Same holds true
for scaling min frequency limit. So this requires usage of correct turbo
max frequency for core one, which in this case is 4.3GHz. So we need to
adjust per CPU cpu->pstate.turbo_freq using the maximum HWP ratio of that
core.

This change uses the HWP capability of a core to adjust max turbo
frequency. But since Broadwell HWP doesn't use ratios in the HWP
capabilities, we have to use legacy max 1 core turbo ratio. This is not
a problem as the HWP capabilities don't differ among cores in Broadwell.
We need to check for non Broadwell CPU model for applying this change,
though.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 4.6+ <stable@vger.kernel.org> # 4.6+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: devicetree: Fix pctldev pointer overwrite

commit bc3322bc166a2905bc91f774d7b22773dc7c063a upstream.

Commit b89405b6102f ("pinctrl: devicetree: Fix dt_to_map_one_config
handling of hogs") causes the pinctrl hog pins to not get initialized
on i.MX platforms leaving them with the IOMUX settings untouched.

This causes several regressions on i.MX such as:

- OV5640 camera driver can not be probed anymore on imx6qdl-sabresd
because the camera clock pin is in a pinctrl_hog group and since
its pinctrl initialization is skipped, the camera clock is kept
in GPIO functionality instead of CLK_CKO function.

- Audio stopped working on imx6qdl-wandboard and imx53-qsb for
the same reason.

Richard Fitzgerald explains the problem:

"I see the bug. If the hog node isn't a 1st level child of the pinctrl
parent node it will go around the for(;;) loop again but on the first
pass I overwrite pctldev with the result of
get_pinctrl_dev_from_of_node() so it doesn't point to the pinctrl driver
any more."

Fix the issue by stashing the original pctldev so it doesn't
get overwritten.

Fixes: b89405b6102f ("pinctrl: devicetree: Fix dt_to_map_one_config handling of hogs")
Cc: <stable@vger.kernel.org>
Reported-by: Mika Penttilä <mika.penttila@nextfour.com>
Reported-by: Steve Longerbeam <slongerbeam@gmail.com>
Suggested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: samsung: Correct EINTG banks order

commit 5cf9a338db94cfd570aa2607bef1b30996f188e3 upstream.

All banks with GPIO interrupts should be at beginning of bank array and
without any other types of banks between them.  This order is expected
by exynos_eint_gpio_irq, when doing interrupt group to bank translation.
Otherwise, kernel NULL pointer dereference would happen when trying to
handle interrupt, due to wrong bank being looked up.  Observed on
s5pv210, when trying to handle gpj0 interrupt, where kernel was mapping
it to gpi bank.

Cc: stable@vger.kernel.org
Fixes: 023e06dfa688 ("pinctrl: exynos: add exynos5410 SoC specific data")
Fixes: 608a26a7bc04 ("pinctrl: Add s5pv210 support to pinctrl-exynos)
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

auxdisplay: fix broken menu

commit b5b903fba96a4d1771422efd5c713ebb73f7dc82 upstream.

Having the CHARLCD Kconfig symbol between "menuconfig AUXDISPLAY"
and "if AUXDISPLAY" breaks the AUXDISPLAY submenus, so move the
CHARLCD Kconfig symbol near the end of the file so that the menu
display is continuous.

Also include ARM_CHARLCD inside of the if AUXDISPLAY/endif block.
Geert says that it should be there.

Fixes: 39f8ea46724e ("auxdisplay: charlcd: Extract character LCD core from misc/panel")
Cc: stable@vger.kernel.org # v4.12
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: pciehp: Clear Presence Detect and Data Link Layer Status Changed on resume

commit 13c65840feab8109194f9490c9870587173cb29d upstream.

After a suspend/resume cycle the Presence Detect or Data Link Layer Status
Changed bits might be set.  If we don't clear them those events will not
fire anymore and nothing happens for instance when a device is now
hot-unplugged.

Fix this by clearing those bits in a newly introduced function
pcie_reenable_notification().  This should be fine because immediately
after, we check if the adapter is still present by reading directly from
the status register.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Add ACS quirk for Intel 300 series

commit f154a718e6cc0d834f5ac4dc4c3b174e65f3659e upstream.

Intel 300 series chipset still has the same ACS issue as the previous
generations so extend the ACS quirk to cover it as well.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Add ACS quirk for Intel 7th & 8th Gen mobile

commit e8440f4bfedc623bee40c84797ac78d9303d0db6 upstream.

The specification update indicates these have the same errata for
implementing non-standard ACS capabilities.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: hv: Make sure the bus domain is really unique

commit 29927dfb7f69bcf2ae7fd1cda10997e646a5189c upstream.

When Linux runs as a guest VM in Hyper-V and Hyper-V adds the virtual PCI
bus to the guest, Hyper-V always provides unique PCI domain.

commit 4a9b0933bdfc ("PCI: hv: Use device serial number as PCI domain")
overrode unique domain with the serial number of the first device added to
the virtual PCI bus.

The reason for that patch was to have a consistent and short name for the
device, but Hyper-V doesn't provide unique serial numbers. Using non-unique
serial numbers as domain IDs leads to duplicate device addresses, which
causes PCI bus registration to fail.

commit 0c195567a8f6 ("netvsc: transparent VF management") avoids the need
for commit 4a9b0933bdfc ("PCI: hv: Use device serial number as PCI
domain").  When scripts were used to configure VF devices, the name of
the VF needed to be consistent and short, but with commit 0c195567a8f6
("netvsc: transparent VF management") all the setup is done in the kernel,
and we do not need to maintain consistent name.

Revert commit 4a9b0933bdfc ("PCI: hv: Use device serial number as PCI
domain") so we can reliably support multiple devices being assigned to
a guest.

Tag the patch for stable kernels containing commit 0c195567a8f6
("netvsc: transparent VF management").

Fixes: 4a9b0933bdfc ("PCI: hv: Use device serial number as PCI domain")
Signed-off-by: Sridhar Pitchai <sridhar.pitchai@microsoft.com>
[lorenzo.pieralisi@arm.com: trimmed commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org # v4.14+
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: BCM47XX: Enable 74K Core ExternalSync for PCIe erratum

commit 2a027b47dba6b77ab8c8e47b589ae9bbc5ac6175 upstream.

The erratum and workaround are described by BCM5300X-ES300-RDS.pdf as
below.

  R10: PCIe Transactions Periodically Fail

    Description: The BCM5300X PCIe does not maintain transaction ordering.
                 This may cause PCIe transaction failure.
    Fix Comment: Add a dummy PCIe configuration read after a PCIe
                 configuration write to ensure PCIe configuration access
                 ordering. Set ES bit of CP0 configu7 register to enable
                 sync function so that the sync instruction is functional.
    Resolution:  hndpci.c: extpci_write_config()
                 hndmips.c: si_mips_init()
                 mipsinc.h CONF7_ES

This is fixed by the CFE MIPS bcmsi chipset driver also for BCM47XX.
Also the dummy PCIe configuration read is already implemented in the
Linux BCMA driver.

Enable ExternalSync in Config7 when CONFIG_BCMA_DRIVER_PCI_HOSTMODE=y
too so that the sync instruction is externalised.

Signed-off-by: Tokunori Ikegami <ikegami@allied-telesis.co.jp>
Reviewed-by: Paul Burton <paul.burton@mips.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/19461/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: cfi_cmdset_0002: Avoid walking all chips when unlocking.

commit f1ce87f6080b1dda7e7b1eda3da332add19d87b9 upstream.

cfi_ppb_unlock() walks all flash chips when unlocking sectors,
avoid walking chips unaffected by the unlock operation.

Fixes: 1648eaaa1575 ("mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) locking")
Cc: stable@vger.kernel.org
Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: cfi_cmdset_0002: Fix unlocking requests crossing a chip boudary

commit 0cd8116f172eed018907303dbff5c112690eeb91 upstream.

The "sector is in requested range" test used to determine whether
sectors should be re-locked or not is done on a variable that is reset
everytime we cross a chip boundary, which can lead to some blocks being
re-locked while the caller expect them to be unlocked.
Fix the check to make sure this cannot happen.

Fixes: 1648eaaa1575 ("mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) locking")
Cc: stable@vger.kernel.org
Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: cfi_cmdset_0002: fix SEGV unlocking multiple chips

commit 5fdfc3dbad099281bf027a353d5786c09408a8e5 upstream.

cfi_ppb_unlock() tries to relock all sectors that were locked before
unlocking the whole chip.
This locking used the chip start address + the FULL offset from the
first flash chip, thereby forming an illegal address. Fix that by using
the chip offset(adr).

Fixes: 1648eaaa1575 ("mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) locking")
Cc: stable@vger.kernel.org
Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: cfi_cmdset_0002: Use right chip in do_ppb_xxlock()

commit f93aa8c4de307069c270b2d81741961162bead6c upstream.

do_ppb_xxlock() fails to add chip->start when querying for lock status
(and chip_ready test), which caused false status reports.
Fix that by adding adr += chip->start and adjust call sites
accordingly.

Fixes: 1648eaaa1575 ("mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) locking")
Cc: stable@vger.kernel.org
Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: cfi_cmdset_0002: Change write buffer to check correct value

commit dfeae1073583dc35c33b32150e18b7048bbb37e6 upstream.

For the word write it is checked if the chip has the correct value.
But it is not checked for the write buffer as only checked if ready.
To make sure for the write buffer change to check the value.

It is enough as this patch is only checking the last written word.
Since it is described by data sheets to check the operation status.

Signed-off-by: Tokunori Ikegami <ikegami@allied-telesis.co.jp>
Reviewed-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
Cc: linux-mtd@lists.infradead.org
Cc: stable@vger.kernel.org
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xprtrdma: Return -ENOBUFS when no pages are available

commit a8f688ec437dc2045cc8f0c89fe877d5803850da upstream.

The use of -EAGAIN in rpcrdma_convert_iovs() is a latent bug: the
transport never calls xprt_write_space() when more pages become
available. -ENOBUFS will trigger the correct "delay briefly and call
again" logic.

Fixes: 7a89f9c626e3 ("xprtrdma: Honor ->send_request API contract")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org # 4.8+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/mlx4: Discard unknown SQP work requests

commit 6b1ca7ece15e94251d1d0d919f813943e4a58059 upstream.

There is no need to crash the machine if unknown work request was
received in SQP MAD.

Cc: <stable@vger.kernel.org> # 3.6
Fixes: 37bfc7c1e83f ("IB/mlx4: SR-IOV multiplex and demultiplex MADs")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/hfi1: Fix user context tail allocation for DMA_RTAIL

commit 1bc0299d976e000ececc6acd76e33b4582646cb7 upstream.

The following code fails to allocate a buffer for the
tail address that the hardware DMAs into when the user
context DMA_RTAIL is set.

if (HFI1_CAP_KGET_MASK(rcd->flags, DMA_RTAIL)) {
rcd->rcvhdrtail_kvaddr = dma_zalloc_coherent(
&dd->pcidev->dev, PAGE_SIZE, &dma_hdrqtail,
                gfp_flags);
if (!rcd->rcvhdrtail_kvaddr)
goto bail_free;
rcd->rcvhdrqtailaddr_dma = dma_hdrqtail;
}

So the rcvhdrtail_kvaddr would then be NULL.

The mmap logic fails to check for a NULL rcvhdrtail_kvaddr.

The fix is to test for both user and kernel DMA_TAIL options
during the allocation as well as testing for a NULL
rcvhdrtail_kvaddr during the mmap processing.

Additionally, all downstream testing of the capmask for DMA_RTAIL
have been eliminated in favor of testing rcvhdrtail_kvaddr.

Cc: <stable@vger.kernel.org> # 4.9.x
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/hfi1: Optimize kthread pointer locking when queuing CQ entries

commit af8aab71370a692eaf7e7969ba5b1a455ac20113 upstream.

All threads queuing CQ entries on different CQs are unnecessarily
synchronized by a spin lock to check if the CQ kthread worker hasn't
been destroyed before queuing an CQ entry.

The lock used in 6efaf10f163d ("IB/rdmavt: Avoid queuing work into a
destroyed cq kthread worker") is a device global lock and will have
poor performance at scale as completions are entered from a large
number of CPUs.

Convert to use RCU where the read side of RCU is rvt_cq_enter() to
determine that the worker is alive prior to triggering the
completion event.
Apply write side RCU semantics in rvt_driver_cq_init() and
rvt_cq_exit().

Fixes: 6efaf10f163d ("IB/rdmavt: Avoid queuing work into a destroyed cq kthread worker")
Cc: <stable@vger.kernel.org> # 4.14.x
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/hfi1: Reorder incorrect send context disable

commit a93a0a31111231bb1949f4a83b17238f0fa32d6a upstream.

User send context integrity bits are cleared before the context is
disabled.  If the send context is still processing data, any packets
that need those integrity bits will cause an error and halt the send
context.

During the disable handling, the driver waits for the context to drain.
If the context is halted, the driver will eventually timeout because
the context won't drain and then incorrectly bounce the link.

Reorder the bit clearing and the context disable.

Examine the software state and send context status as well as the
egress status to determine if a send context is in the halted state.

Promote the check macros to static functions for consistency with the
new check and to follow kernel style.

Remove an unused define that refers to the egress timeout.

Cc: <stable@vger.kernel.org> # 4.9.x
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/hfi1: Fix fault injection init/exit issues

commit 8c79d8223bb11b2f005695a32ddd3985de97727c upstream.

There are config dependent code paths that expose panics in unload
paths both in this file and in debugfs_remove_recursive() because
CONFIG_FAULT_INJECTION and CONFIG_FAULT_INJECTION_DEBUG_FS can be
set independently.

Having CONFIG_FAULT_INJECTION set and CONFIG_FAULT_INJECTION_DEBUG_FS
reset causes fault_create_debugfs_attr() to return an error.

The debugfs.c routines tolerate failures, but the module unload panics
dereferencing a NULL in the two exit routines.  If that is fixed, the
dir passed to debugfs_remove_recursive comes from a memory location
that was freed and potentially reused causing a segfault or corrupting
memory.

Here is an example of the NULL deref panic:

[66866.286829] BUG: unable to handle kernel NULL pointer dereference at 0000000000000088
[66866.295602] IP: hfi1_dbg_ibdev_exit+0x2a/0x80 [hfi1]
[66866.301138] PGD 858496067 P4D 858496067 PUD 8433a7067 PMD 0
[66866.307452] Oops: 0000 [#1] SMP
[66866.310953] Modules linked in: hfi1(-) rdmavt rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm iw_cm ib_cm ib_core rpcsec_gss_krb5 nfsv4 dns_resolver nfsv3 nfs fscache sb_edac x86_pkg_temp_thermal intel_powerclamp vfat fat coretemp kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel iTCO_wdt iTCO_vendor_support crypto_simd mei_me glue_helper cryptd mxm_wmi ipmi_si pcspkr lpc_ich sg mei ioatdma ipmi_devintf i2c_i801 mfd_core shpchp ipmi_msghandler wmi acpi_power_meter acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables ext4 mbcache jbd2 sd_mod mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt igb fb_sys_fops ttm ahci ptp crc32c_intel libahci pps_core drm dca libata i2c_algo_bit i2c_core [last unloaded: opa_vnic]
[66866.385551] CPU: 8 PID: 7470 Comm: rmmod Not tainted 4.14.0-mam-tid-rdma #2
[66866.393317] Hardware name: Intel Corporation S2600WT2/S2600WT2, BIOS SE5C610.86B.01.01.0018.C4.072020161249 07/20/2016
[66866.405252] task: ffff88084f28c380 task.stack: ffffc90008454000
[66866.411866] RIP: 0010:hfi1_dbg_ibdev_exit+0x2a/0x80 [hfi1]
[66866.417984] RSP: 0018:ffffc90008457da0 EFLAGS: 00010202
[66866.423812] RAX: 0000000000000000 RBX: ffff880857de0000 RCX: 0000000180040001
[66866.431773] RDX: 0000000180040002 RSI: ffffea0021088200 RDI: 0000000040000000
[66866.439734] RBP: ffffc90008457da8 R08: ffff88084220e000 R09: 0000000180040001
[66866.447696] R10: 000000004220e001 R11: ffff88084220e000 R12: ffff88085a31c000
[66866.455657] R13: ffffffffa07c9820 R14: ffffffffa07c9890 R15: ffff881059d78100
[66866.463618] FS:  00007f6876047740(0000) GS:ffff88085f800000(0000) knlGS:0000000000000000
[66866.472644] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[66866.479053] CR2: 0000000000000088 CR3: 0000000856357006 CR4: 00000000001606e0
[66866.487013] Call Trace:
[66866.489747]  remove_one+0x1f/0x220 [hfi1]
[66866.494221]  pci_device_remove+0x39/0xc0
[66866.498596]  device_release_driver_internal+0x141/0x210
[66866.504424]  driver_detach+0x3f/0x80
[66866.508409]  bus_remove_driver+0x55/0xd0
[66866.512784]  driver_unregister+0x2c/0x50
[66866.517164]  pci_unregister_driver+0x2a/0xa0
[66866.521934]  hfi1_mod_cleanup+0x10/0xaa2 [hfi1]
[66866.526988]  SyS_delete_module+0x171/0x250
[66866.531558]  do_syscall_64+0x67/0x1b0
[66866.535644]  entry_SYSCALL64_slow_path+0x25/0x25
[66866.540792] RIP: 0033:0x7f6875525c27
[66866.544777] RSP: 002b:00007ffd48528e78 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[66866.553224] RAX: ffffffffffffffda RBX: 0000000001cc01d0 RCX: 00007f6875525c27
[66866.561185] RDX: 00007f6875596000 RSI: 0000000000000800 RDI: 0000000001cc0238
[66866.569146] RBP: 0000000000000000 R08: 00007f68757e9060 R09: 00007f6875596000
[66866.577120] R10: 00007ffd48528c00 R11: 0000000000000206 R12: 00007ffd48529db4
[66866.585080] R13: 0000000000000000 R14: 0000000001cc01d0 R15: 0000000001cc0010
[66866.593040] Code: 90 0f 1f 44 00 00 48 83 3d a3 8b 03 00 00 55 48 89 e5 53 48 89 fb 74 4e 48 8d bf 18 0c 00 00 e8 9d f2 ff ff 48 8b 83 20 0c 00 00 <48> 8b b8 88 00 00 00 e8 2a 21 b3 e0 48 8b bb 20 0c 00 00 e8 0e
[66866.614127] RIP: hfi1_dbg_ibdev_exit+0x2a/0x80 [hfi1] RSP: ffffc90008457da0
[66866.621885] CR2: 0000000000000088
[66866.625618] ---[ end trace c4817425783fb092 ]---

Fix by insuring that upon failure from fault_create_debugfs_attr() the
parent pointer for the routines is always set to NULL and guards added
in the exit routines to insure that debugfs_remove_recursive() is not
called when when the parent pointer is NULL.

Fixes: 0181ce31b260 ("IB/hfi1: Add receive fault injection feature")
Cc: <stable@vger.kernel.org> # 4.14.x
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/isert: fix T10-pi check mask setting

commit 0e12af84cdd3056460f928adc164f9e87f4b303b upstream.

A copy/paste bug (probably) caused setting of an app_tag check mask
in case where a ref_tag check was needed.

Fixes: 38a2d0d429f1 ("IB/isert: convert to the generic RDMA READ/WRITE API")
Fixes: 9e961ae73c2c ("IB/isert: Support T10-PI protected transactions")
Cc: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/isert: Fix for lib/dma_debug check_sync warning

commit 763b69654bfb88ea3230d015e7d755ee8339f8ee upstream.

The following error message occurs on a target host in a debug build
during session login:

[ 3524.411874] WARNING: CPU: 5 PID: 12063 at lib/dma-debug.c:1207 check_sync+0x4ec/0x5b0
[ 3524.421057] infiniband hfi1_0: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x0000000000000000] [size=76 bytes]
......snip .....

[ 3524.535846] CPU: 5 PID: 12063 Comm: iscsi_np Kdump: loaded Not tainted 3.10.0-862.el7.x86_64.debug #1
[ 3524.546764] Hardware name: Dell Inc. PowerEdge R430/03XKDV, BIOS 1.2.6 06/08/2015
[ 3524.555740] Call Trace:
[ 3524.559102]  [<ffffffffa5fe915b>] dump_stack+0x19/0x1b
[ 3524.565477]  [<ffffffffa58a2f58>] __warn+0xd8/0x100
[ 3524.571557]  [<ffffffffa58a2fdf>] warn_slowpath_fmt+0x5f/0x80
[ 3524.578610]  [<ffffffffa5bf5b8c>] check_sync+0x4ec/0x5b0
[ 3524.585177]  [<ffffffffa58efc3f>] ? set_cpus_allowed_ptr+0x5f/0x1c0
[ 3524.592812]  [<ffffffffa5bf5cd0>] debug_dma_sync_single_for_cpu+0x80/0x90
[ 3524.601029]  [<ffffffffa586add3>] ? x2apic_send_IPI_mask+0x13/0x20
[ 3524.608574]  [<ffffffffa585ee1b>] ? native_smp_send_reschedule+0x5b/0x80
[ 3524.616699]  [<ffffffffa58e9b76>] ? resched_curr+0xf6/0x140
[ 3524.623567]  [<ffffffffc0879af0>] isert_create_send_desc.isra.26+0xe0/0x110 [ib_isert]
[ 3524.633060]  [<ffffffffc087af95>] isert_put_login_tx+0x55/0x8b0 [ib_isert]
[ 3524.641383]  [<ffffffffa58ef114>] ? try_to_wake_up+0x1a4/0x430
[ 3524.648561]  [<ffffffffc098cfed>] iscsi_target_do_tx_login_io+0xdd/0x230 [iscsi_target_mod]
[ 3524.658557]  [<ffffffffc098d827>] iscsi_target_do_login+0x1a7/0x600 [iscsi_target_mod]
[ 3524.668084]  [<ffffffffa59f9bc9>] ? kstrdup+0x49/0x60
[ 3524.674420]  [<ffffffffc098e976>] iscsi_target_start_negotiation+0x56/0xc0 [iscsi_target_mod]
[ 3524.684656]  [<ffffffffc098c2ee>] __iscsi_target_login_thread+0x90e/0x1070 [iscsi_target_mod]
[ 3524.694901]  [<ffffffffc098ca50>] ? __iscsi_target_login_thread+0x1070/0x1070 [iscsi_target_mod]
[ 3524.705446]  [<ffffffffc098ca50>] ? __iscsi_target_login_thread+0x1070/0x1070 [iscsi_target_mod]
[ 3524.715976]  [<ffffffffc098ca78>] iscsi_target_login_thread+0x28/0x60 [iscsi_target_mod]
[ 3524.725739]  [<ffffffffa58d60ff>] kthread+0xef/0x100
[ 3524.732007]  [<ffffffffa58d6010>] ? insert_kthread_work+0x80/0x80
[ 3524.739540]  [<ffffffffa5fff1b7>] ret_from_fork_nospec_begin+0x21/0x21
[ 3524.747558]  [<ffffffffa58d6010>] ? insert_kthread_work+0x80/0x80
[ 3524.755088] ---[ end trace 23f8bf9238bd1ed8 ]---
[ 3595.510822] iSCSI/iqn.1994-05.com.redhat:537fa56299: Unsupported SCSI Opcode 0xa3, sending CHECK_CONDITION.

The code calls dma_sync on login_tx_desc->dma_addr prior to initializing it
with dma-mapped address.
login_tx_desc is a part of iser_conn structure and is used only once
during login negotiation, so the issue is fixed by eliminating
dma_sync call for this buffer using a special case routine.

Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Don Dutile <ddutile@redhat.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>