author | Yair Shapira <yair.shapira@ti.com> | |
Thu, 15 Nov 2012 10:37:48 +0000 (12:37 +0200) | ||
committer | Yair Shapira <yair.shapira@ti.com> | |
Thu, 15 Nov 2012 10:37:48 +0000 (12:37 +0200) | ||
commit | b62f31d9b91f0c8de415106efb8d4e41758ce5ad | |
tree | 5cc4ce685be8f07bd0dfd3545ebd9b749dac18c5 | tree | snapshot (tar.xz tar.gz zip) |
parent | 02bd9a92b5dbd08c33f8d5d1609f224fca903758 | commit | diff |
update mc FW version 8.5.0.0.25
MAC Firmware version: 8.5.0.0.25
PHY Firmware version: 8.2.0.0.151
- Treat correctly SCB interrupt triggered while WLAN was in ELP
- Invoke SG routines for AP/GO/Device AFTER the global roles variables
were updated
- update SCB for BT after AP/GO role stops
- remove IBSS code from SG
- on muxing GPIOs for SG, write values to TOP and PHY registers only once.
PHY stores/recovers its debug registers during ELP
- Bug fix – Don't disconnect if first attempt to sync with the AP by sending
probe request is unsuccessful. Retry to send probe for
MGMT_SEQ_OUT_OF_SYNC_ATTEMPTS = 4time
- Move the reading of IMM registers in the RX MAC header to be protected under
the DISABLE_ALL
- Set the protection of BT sniff activity when SCO activity is active to be
for 2500msec
- Don't dilute CTS if current role is under Mgmt sequence
- Remove patch for not sending CTS to protect SCO during connection protection
- In AP role – set the Max RxT to be the minimum of fix value
RXT_MAX_DURATION_USEC and calculated according to lowest supported rate.
- Patch - Don't set TX limit rules on sniff activities.
Signed-off-by: Yair Shapira <yair.shapira@ti.com>
MAC Firmware version: 8.5.0.0.25
PHY Firmware version: 8.2.0.0.151
- Treat correctly SCB interrupt triggered while WLAN was in ELP
- Invoke SG routines for AP/GO/Device AFTER the global roles variables
were updated
- update SCB for BT after AP/GO role stops
- remove IBSS code from SG
- on muxing GPIOs for SG, write values to TOP and PHY registers only once.
PHY stores/recovers its debug registers during ELP
- Bug fix – Don't disconnect if first attempt to sync with the AP by sending
probe request is unsuccessful. Retry to send probe for
MGMT_SEQ_OUT_OF_SYNC_ATTEMPTS = 4time
- Move the reading of IMM registers in the RX MAC header to be protected under
the DISABLE_ALL
- Set the protection of BT sniff activity when SCO activity is active to be
for 2500msec
- Don't dilute CTS if current role is under Mgmt sequence
- Remove patch for not sending CTS to protect SCO during connection protection
- In AP role – set the Max RxT to be the minimum of fix value
RXT_MAX_DURATION_USEC and calculated according to lowest supported rate.
- Patch - Don't set TX limit rules on sniff activities.
Signed-off-by: Yair Shapira <yair.shapira@ti.com>
wl18xx-fw-mc.bin | diff | blob | history |